Troy-Bilt Storm 2410, 2420, 2620, 2625, 2840, 2890, 3090 snow thrower Operator's Manual
Below you will find brief information for snow thrower Storm 2410, snow thrower Storm 2420, snow thrower Storm 2620. This manual provides instructions on how to assemble, operate, and maintain your snow thrower. The manual also includes information on troubleshooting common problems and safety precautions. It recommends checking the snow thrower for wear and tear before operating.
advertisement
▼
Scroll to page 2
of
60
advertisement
Key Features
- Two-stage snow removal
- Adjustable chute
- Heated grips
- Multiple forward and reverse speeds
- Easy to assemble and operate
- Safety features
Frequently Answers and Questions
How do I adjust the chute assembly?
Loosen the plastic knob on the left side of the chute assembly. Pivot the chute upward or downward before retightening the knob.
How do I replace the auger shear pins?
Shut off the engine and remove the key. Remove the shear pins from the auger shaft. Replace with OEM Part No. 738-04124A replacement shear pins. Tighten securely.
How do I clear a clogged chute assembly?
Shut off the engine and remove the key. Use the shovel-shaped end of the clean-out tool to dislodge and scoop any snow and ice which has formed in and near the chute assembly.