FingerTec AC800 Series Service manual
advertisement
SM800-01
AC800 Series Fingerprint Reader
JULY 2005 VERSION 1 Compiled by K.L. Pang
Table of Contents
Chapter 1
General Descriptions for AC800 Series
Reader
Chapter 2
Components - Details and Functions
2.0
2.1 Details of Parts
2.1.1 Graphical Dot Matrix LCD
2.1.2 Connections
Graphical Dot Matrix LCD and Controller Board
2.1.3 Optical Fingerprint Sensor
2.1.4 Connections between Optical
Sensor and FP Matching Board
2.1.5 FP Board
2.1.6 Connection of FP Matching
Board and AC800 Series
Controller
2.1.7 Keypad
2.1.8 Connection of Keypad Board and Controller Board
2.1.9 Speaker
2.1.10 AC800 series Controller Board
2.2 Arrangements of Components in
AC800 Series Reader
Chapter 3
Troubleshooting and Repairing
3.1 Connection between Reader and PC using LAN connection
3.1.1 Solutions
3.2 Connections between Reader and PC
RS232/485
3.2.1 Solutions
3.3 Troubleshooting for LCD Screen
Displaying
3.3.1 Solutions
3.4 Troubleshooting for Fingerprint Sensor
3.4.1 Solutions
Chapter 4
Door Lock System
4.1
4.2 Push Release Button
4.3 Override Key Switch
4.4 Emergency Break Glass
4.5 Complete connection of door lock
system
4.5.1 Simple door lock system (with fi ngerprint reader)
4.5.2 Door lock system with in/out reader
Chapter 1: General Descriptions of
AC800 Series Fingerprint Reader
Model
Template Size
Transaction Storage
Communication
Identifi cation Time
FAR
FRR
Time Zone
Temperature
Power
Size
: AC801 / AC802 / AC803 /
AC801WG
: 1k (AC801) / 1.5k (AC802) / 2.8k
(AC803)
: 30k (AC801) / 100k (AC802) /
120k (AC803)
: RS232, RS485, TCP/IP; Wiegand
: <=2s
: <=0.0001%
: <=1%
: 50 settings
: 0 - 45°C
: 12VDC @ 1A
: 150(W) x 145(H) x 38.5(D) mm
Overview
•
•
•
•
•
•
•
•
•
•
•
•
One to many identifi cation
One to one verifi cation
10 fi ngers enrollment per user
Standalone and/or networked operation
50 defi nable time zones
Integrated wall mount design
Power management
In-Out reader confi guration
Voice greetings
Wireless doorbell
Separate control of EM-Lock
26-bit Wiegand output (for WG model only)
Copyright © 2005 FingerTec Worldwide. All rights reserved.
2
Chapter 2: Components – Details and Functions
2.0 Components Assembly
AC800 Series Fingerprint Reader Service Manual
Figure 2.1 Front view of AC800
Figure 2.2 Components inside reader
Copyright © 2005 FingerTec Worldwide. All rights reserved.
3 AC800 Series Fingerprint Reader Service Manual
Chapter 2: Components – Details and Functions
2.1 Details of Parts
2.1.1 LCD Display Board
LCD display board for AC800 series is connected to keypad board during factory assembly. LCD functions to display text messages to user. It will prompt the user for necessary actions. For AC800 series reader, the dimension of the LCD screen is 128x64 pixels (2.7cm X 4.2cm).
LCD screen
Keypad board
Connector pins
Contrast controller
Figure 2.3 Front view of LCD
Display board
Figure 2.4 Back view of LCD
Displaying board
• Connector Pins
A cable to controller board connects this part. Improper connection could cause no LCD display when reader is turned on.
This IDE cable is used to connect keypad to the controller board.
This IDE cable is plugged into the connector pins on the keypad board and controller board.
Please use the diagram below during plugging in of the IDE cable.
Keypad board Controller board
Figure 2.4 IDE cable Figure 2.5 Connections between controller board & keypad board
Copyright © 2005 FingerTec Worldwide. All rights reserved.
advertisement
Related manuals
advertisement