Katalog_INT_2012 Buch.indb - Busch
Movement detector.
A watchdog that never sleeps.
It welcomes visitors and deters burglars. It sees everything
and can turn night into day, if needed. The new generation of
Busch-Watchdog stands for state-of-the-art, comprehensive
detection and many useful service functions.
318 Movement detector | Catalogue 2012
01
Movement detector
01 Busch-Watchdog 220 WaveLINE.
Colour: white
02 Busch-Watchdog Presence tech
BasicLINE Corridor
03 Busch-Watchdog 180 flush-mounted comfort
sensor. Switch series solo ®.
Colour: davos studio white.
04 Busch-Comfort switch.
Switch series solo ®. Colour: davos studio white .
*Certified for barrier-free living.
Contents
Movement detector
02
03
Busch-Watchdog, surface-mounted*
p. 328
Corner adapter
p. 330
IR remote control
p. 330
Busch-Watchdog presence tech
p. 332
Busch-Watchdog, flush-mounted*
p. 334
Twilight switch
p. 337
Busch-Comfort switch
p. 338
04
Catalogue 2012 | Movement detector 319
This switch can sense
your needs.
A flush-mounted movement detector
is, for all intents and purposes, just a
light switch – one you don’t have to
press. It activates when it gets dark
and it senses body heat. It will switch
on automatically to show you the
way – perfect! When you have no free
hands.
Selection guide: the Busch-Watchdog flush-mounted range
Standard
6800-21x-104
6800-2x-104
6800-8x-104
6800-21x-104M
6800-2x-104M
6800-8x-104M
6800-3x-102C
6800-7x-104
6800-7x-104M
Multi-lens
6813-xx
6813/11-xx
Combi-lens
Select lens
6810-212/214-101
All Weather 44®
Comfort II*
IP 44
Frost-proof to –25°C
Caution!
Use outdoors only with
6401 U-102!
*Switch-off behaviour:
In combination with 6593
U (soft OFF function), the
Comfort II sensor dims and
switches off within 60 seconds.
6812 U-101
6804 U-101
Relay insert
700 W/VA
3-wire technology
MOSFET insert
60–420 W/VA
2-wire technology
6593 U
Universal Master Dimmer
60–420 W/VA
2-wire technology
6402 U
Universal 2gang-1way
insert, 2,300 W/VA,
3-wire technology
OFF
320 Movement detector | Catalogue 2012
6805 U
Automatic
Extension, 3-wire
technology
Compatible
with 6401 U-102
ON
6401 U-102
L
2020 US (NO contact push-switch)
Universal relay insert,
2,300 W/VA, 3-wire
technology
Slide switch
Always on, allways off, or automatic mode
can be individually selected using the slide
switch. Optionally, the slide switch can be
fixed to automatic mode using a screw on
the back side, e.g. in public buildings.
Simply Safe and comfortable –
provides you an extra hand
Hold on to what’s precious: put your kids
to bed without a care – Busch-Watchdog
lights your way.
The convenient combination: The movement
detector and dimmer of ABB/Busch-Jaeger
do not suddenly leave you in the dark.
Flush-mounted insert: Dimmer 6593 U
Busch-Watchdog sensor: 6800-xx-104M
Movement
no Movement
100%
50%
0%
When the delay time is up, the
lighting will be dimmed slowly
within 60 seconds.
Application of main and auxiliary units
If more than only one movement
detector is requirement, additional
movement detectors can be installed
using extension inserts. This makes
sense, for example, in the case of
L-shaped corridors.
Busch-Wächter® 180 flush-mounted
comfort sensor II insert: 6800-xx-104 (M)
Extension insert insert: 6805 U
for main unit, e.g. 6401 U-102, 6402 U,
6804 U-101, 6593 U and 6550 U-101
Catalogue 2012 | Movement detector 321
Busch-Comfort switch –
The switch with four comfort levels.
It can be operated like a normal
switch – but offers additional
possibilities that have never been
combined in this way before in one
device. Non-contact, manual or
time-controlled switching – functional,
versatile and aesthetic – the new
comfort switch that offers unparalleled
flexibility.
The new Busch-Comfort switch offers
different levels of comfort and thus
a variety of switching possibilities.
It can even be implemented fully
automatically and the light can be
switched on and off again if a person is
detected. It can however also leave the
light on and act as a semi-automatic
function, until it is switched off again
manually by pressing the button.
In addition, the Busch-Comfort switch
can also act as a timer. In this case it
reacts when a button is pressed and
automatically switches the light off
later at a pre-determined time, if it no
longer detects any presence.
In addition, the Busch-Comfort switch
can be used as a completely normal
switch that reacts exclusively to
manual operation. Its extension unit
input makes it possible to integrate
it into almost all two-way and backto-back connections. The 2-wire
insert is ideally suited for retrofitting,
while the new relay insert permits the
connection of universal loads. No
matter what function you decide on:
despite its technical possibilities the
Busch-Comfort switch almost looks
like a normal switch and is just as
easy to use.
The integrated sensor is barely
noticeable due to its flat construction,
and an LED located on the lens
tells everyone who enters or leaves
the room that the switch must be
operated manually. At the same time,
the LED is used as an orientation light
and ensures that the switch can be
found easily, even in the dark.
Adjustment possibilities on the back of the
control element
01
02
The relay switch insert (6816 U) for
switching universal loads up to 2,300
W/VA is also suited for fluorescent
and energy-saving lamps. The comfort
switch can thus be used for all load
types almost everywhere.
The flat lens is available in various
finishes tones and matches the
colour of the rocker switch.
01 Busch-Comfort switch insert (6815 U)
2-conductor connection
02 Busch-Comfort switch relay insert (6816 U)
3-conductor connection
322 Movement detector | Catalogue 2012
Basic comfort: Switches in the
normal way.
100%
In operation mode basic-comfort the comfort
switch is operated manually. This manual
operation at any time is fundamentally the basis of
all comfort levels. No matter what you imagine –
you can always perform every switching procedure
from every main or auxiliary switch. Sometimes
you just want to do things differently than planned.
0%
ON
OFF
Timing comfort: Manual switching-on
function but with automatic switchingoff function – you can determine the
length of the time interval.
100%
Everyone has experienced it: You enter the house
and the light is still on because someone has
just gone through the corridor. After a few steps,
you are suddenly in the dark – the set time has
expired. With the Busch-Comfort switch, such
unpleasant, dangerous events are a thing of the
past. It detects again that someone is still in the
corridor and the selected follow-up time starts
again from the beginning.
0%
ON
OFF
Maximum comfort: Fully automatic
switching.
100%
0%
ON
OFF
Medium comfort: Automatic switching-on function but is switched off by
hand – sometimes less automation is
preferable.
100%
The light is switched on as soon as someone
enters the detection range. The duration of
activation can be freely selected between
1 and 10 minutes. The nice thing is: if someone
enters the detection range again, this time is
reset and restarts before the light goes off.
Also the brightness threshold, from which the
light automatically switches on, can be set and
adjusted to the circumstances. This leaves you
undisturbed and flexible – even when the use of a
room or the light conditions change. If BuschComfort switch relay inserts are used, they can be
switched in parallel.
The Busch Comfort switch turns on the light
automatically and leaves it switched on for as long
as you like. If you remain quiet or leave the detection
range of the device for a brief period, the light remains
on. You can carry on with your work without any
disturbance and the light does not go out again until
the button is pressed.
0%
ON
OFF
Catalogue 2012 | Movement detectoru 323
Detection zones of Busch-Watchdog, flush-mounted
Detection zone
Detection levels
Front 0,8–1,2 m
12 m
8m
0,8 m – 1,2 m
Horizontal
Vertical
8m
Mask along the side using the blind
No narrowing possible since there is only
one detection level.
Mask along the side using the blind
By masking off the wide range, detection can be limited to the close range.
12 m
ca. 2°
Mounting ht. 0,8 m – 2,5 m
1,2 m 2,0 m 52,5
m 4 mm
2,5 m
Front Side
10 m
12 m
2,5 m 4 m15
5 m m
2,5 m
4m
5m
Mounting ht.
1,2 m
2,0 m
2,5 m
5°
25°
Remote
10 m
12 m
15 m
Close
2m
3m
3,5 m
15 m
5°
10 m
Multi-lens
8m
Limiting the detection zone
Side
12 m
Select lens
ca. 3°
Mounting ht. 5°
Mounting ht. Front Side
Mask along the side using the blind
RemoteMediumClose
9 m
3 m
1m
12 m
8 m
3m
15 m
11 m
3,5 m
15 m
9m
12 m
5°
7°
zaklejając obszar daleki lub średni można
ograniczyć wykrywanie do obszaru
położonego w bliskiej odległości
Mounting ht.
1,2 m
2,0 m
2,5 m
5°
0,8 m – 2,5 m
Combi lens
1,2 m 9 m 4 m
2,0 m
12 m 8 m
m
1510 mm
10 m
102,5
m 8m
4m
4m 8m
5°
18°
5°
Application example: DualLINE presence detector
03
04
01 Busch-Watchdog presence tech DualLINE
insert: 6813/11-xxx and insert 6402 U
01
02Push-button
02
Today, presence detectors are a vital
part of all publicly and commercially
used buildings and result in great
savings. The new Busch-Watchdog
presence dualLINE. It doesn’t just
monitor, it also offers many useful
additional functions.
324 Movement detector | Catalogue 2012
03 1 sensor of other manufacturers
04 4 sensors and mirror/lens system of Busch-Watchdog presence tech.
The detection system consisting of sensors
and mirrors is far superior to common
movement sensors. Even the smallest
movement is detected.
›› Control two independent lighting
rows by only one presence detector
dependent on daylight.
›› Either fully automatic or semiautomatic mode: activation and
deactivation is controlled only by the
presence detector or activation is
controlled by a push-switch, while
deactivation takes place automatically.
›› In fully automatic operation, the
presence detector can be switched to
continuous OFF using the push-switch;
activation using the push-switch is possible at any time.
›› Manual continuous lighting is possible via push-switch: the automatic return
to automatic mode takes place when
no more movement is detected.
Overview of Busch-Watchdog, surface-mounted
Busch-Watchdog
220 AlarmLINE
6849 AGM-204
Busch-Watchdog
220 ProfessionalLINE
6845/11 AGM-204
Busch-Watchdog
280 ProfessionalLINE
6846 AGM-204
Rearfield detection
Rearfield detection
Rearfield detection
Range up to 6 m
Security zone 6 m
Range up to 16 m
Range up to 16 m
Busch-Watchdog
90 ProfessionalLINE
6853 AGM-204
Busch-Watchdog 220
SelectLINE
6845 AGS-204
Busch-Watchdog
220 WaveLINE
6745 AGM-204
Rearfield detection
Rearfield detection
Range up to 12 m
Range up to 16 m
6m
Range up to 16 m
6m
Setting the transmission range
›› Regulation of the range due to turning, switching, or partially covering
›› The optimum mounting height is
2.50 m.
Busch-Watchdog
BasicLINE
6844 AGM-204-500
Rearfield detection
Security zone 12 m
Mounting possibilities
01
02
03
04
01
02
03
04
Wall mounting
Ceiling mounting
Corner mounting
(using the corner adapter)
Corner adapter for Busch-Watchdog ProfessionalLINE insert:: 6887-xx
Busch-Watchdog 220 SelectLINE
›› Particularly thin, discoidal detection zone
›› Horizontally aligned detection with a
flat, wide-area cover, e.g. suitable for
warehouse passageways in large industrial
premises
›› In case of an attachment height of
1.5 metres, for example – horizontally
aligned – a one-metre-high area in which
no detection takes place arises.
Animals are thus not detected, while
people always are.
5°
Catalogue 2012 | Movement detector 325
Modular design of electronic inserts
and control elements
Control element Surface mounting
Timer control element
Switch./dim. cap. Flush-mounted insert
Switching
Comfort timer control
element 6455
Dimming
Blind
Universal
relay insert
6401 U-102
Universal
2gang1way
insert 6402 U
Relay
MOSFET
insert 6812 insert
U-101
6804 U-101
Extension
insert
6805 U
Universal
master dimmer
insert 6593 U
Memory touchtype controller
6550 U-101
Memory
2gang-1way
dimmer,
2gang 6565 U
Memory touch
dimmer
6560 U-101
Basic blind
insert 6418 U
Blind control II
insert 6411
U-101/6411
U/S-101
2,300 W/VA
All loads
10 AX
2,300 W/VA
All loads
10 AX
700 W/VA
All loads
3 A
Active
Watchdog
extension for
6401 U-102,
6402 U, 6804
U-101, 6593 U,
and 6550
U-101
60–420 W/VA, expandable by 6594 U up
to 735 W/VA 230 V
incandescent and halogen lamps, low-voltage
halogen lamps with
conventional or Buschelectronic transformers
ECG = 0/1–10 V,
LEDs with electronic control gear,
700 W/VA, higher
contact load possible with external
relay, 50 mA control current
2 x 40-315
W/VA, 230 V
incandescent and
halogen lamps,
low-voltage
halogen lamps
with electronic
transformer
20–500 W/VA,
230 V incandescent and
halogen lamps,
low-voltage
halogen lamps
with conventional
transformer
690 VA,
3 A at cos
 0.5
690 VA,
3 A at cos
 0.5
X
(Timer with adjustable brightness
values)
X
(timer with
adjustable
brightness
values)
60–240 W/VA,
230 V incandescent and
halogen lamps,
low-voltage halogen lamps with
conventional or
Busch-electronic
transformers
X
Timer with
maintained
contact
(for switching
lights, pumps
etc.)
X
(timer with
3-minute contact for lowering and raising
blinds)
X
(timer with
3-minute contact for lowering and raising
blinds)
Standard timer control
element 6456
Busch-Watchdog
presencetech DualLINE
6813/11-xxx
X *)
(either semiautomatic or
fully automatic
operation)
X *)
X *)
(fully
automatic
operation
only)
X *)
(either semiautomatic or
fully automatic
operation)
X *)
X *)
(constant light
regulation, either
semiautomatic
or fully automatic
operation)
X *)
(constant light
regulation, either
semiautomatic
or fully automatic operation)
X *)
X *)
X *)
X *)
X *)
(constant light
regulation)
X *)
(constant light
regulation)
(heating, air conditioning, ventilation
function, Output
2 with switch-on/
switch-off delay in
relation to Output 1)
Busch-Watchdog
presencetech
6813-xxx-101
Busch-Watchdog sensor
All-Weather 44 with combination lens 6800-3x-102C
X *)
(for controlling
two independent lighting
rows)
X
(only 6401
U-102 for outdoor use,
frost-proof up
to –25°C)
X
(Output 2 with
switch-on/
switch-off delay
in relation to
Output 1)
X
X
(Output 2 with
switch-on/
switch-off delay
in relation to
Output 1)
X
X
X
X
X
(Output 2 with
switch-on/
switch-off delay
in relation to
Output 1)
X
X
X
Busch-Watchdog comfort
sensor (multilens)
6800-xxx-104(M)
Busch-Watchdog
sensor standard
6810-21x
X *)
(latching relay)
Busch-Remote control IR
control element
6067-xxx-xxx
X
X
X
X
X
X
X *)
(latching relay,
2 NO contacts,
separate slave
contact for light
and fan control)
X *)
(electronic
serial switch,
remote-controllable, 2 NO
contacts)
Busch-Remote control IR
control element
6066-xxx-xxx
X
(Soft OFF mode:
dim down/switch
off within the final
minute/switch-off
warning)
X
X
(electronic 2gang
switch,
2 NO contacts)
X
X
Busch-Blind control II
control element
6430-xxx-xxx
X
Control Element for
Memory 2gang dimmer
6545-xxx
X)
(latching
relay)
Touch dimmer
control element
6543-xxx-10x
X
(latching relay,
2 NO contacts,
separate slave
contact for light
and fan control)
X
Switching
326 Movement detector | Catalogue 2012
X
X
Dimming
Blind
X .....Combination possible
*) Optional remote-controllable by IR with 6010-25 or Beo6 remote control of Bang & Olufsen.
Busch-Watchdog 220
WaveLINE
Due to the distribution of the sensor and
actuator functions across two devices,
this Busch-Watchdog opens up
completely new application possibilities.
The sensor can be placed fully freely
wherever it optimally monitors the entire
detection range. It works particularly
energy-saving so that the high-power
batteries used last up to 10 years. If it
detects a movement, it then transfers
the switch-on signal to the built-in
receiver, which can even be installed
in a deep flush-mounted socket outlet
underneath a push-switch near the
lamp. In addition, it is possible to assign
several sensors to a single actuator
and thus reliably monitor even angled
areas. The mounting of the WaveLINE
Watchdog could not be easier. Wiring
is not required due to battery operation.
With only one fastening screw, the wall
connection socket is quickly attached
to the wall. In the process, a rubber
absorber provides perfect adjustment
in case of an uneven foundation.
Adapters for mounting to house corners
or downpipes are also available. The
sensor itself is then connected to the wall
connection socket via a bayonet lock
and can be turned by 30°, for example,
for the equalisation of slopes. A battery
test can be performed directly on the
device and the sending of a low-battery
message to a detector is also possible.
Even without the supply voltage, movement
can be reliably detected. The battery-operated
watchdog sensors can be mounted onto any
terrain.
02
01 Busch-Watchdog 220 WaveLINE
insert:: 6745 AGM-204
02 Built-in receiver WaveLINE
insert:: 6701
03 WaveLINE LED display
insert:: 6730-xx na 6404 U
››
03
It is possible to display the detection
of a movement using an LED on the
Busch-Watchdog.
01
These presence detectors are complete devices with integrated relay.
Detection range (ø
at 2.5 m installation
height)
Connection
for pushbutton
Semiautomatic or
automatic
IP 54 (only with
surface-mounted
housing 6888)
Remote control
6843
X
6m
BasicLINE mini
6811 EB
7m
X
X
24 m
X
X
12 m
X
X
BasicLINE
6814 U
Corridor
6818 U
Busch-Watchdog
BasicLine
6844 AGM-204-500
Catalogue 2012 | Movement detector 327
Busch-Watchdog
Product
Article-No.
Order-No.
Pack/Qty
Product
Busch-Watchdog® Presence tech BasicLINE 1)
Electronic movement detector for detecting thermal motion.
Additional possibility for switch-on via normally open pushbutton switch.
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz
Outputs: 1x Normally open contact, potential-bound
Suitable for: 230 V incandescent lamps
Rated power: 1000 W
Suitable for: 230 V halogen lamps
Rated power: 2000 W
Suitable for: Fluorescent lamps
Rated power: 1000 W
Detection range: frontal: 12 m, lateral: 12 m
Detection angle: 240 °
Brightness limit value: 10 Lux - 200 Lux , Daytime operation
Mounting height: 2.5 m
Protection class (Device): IP 55
Temperature range (Device): -20 °C to 40 °C
Dimensions: (L x W x D): 95 mm x 76 mm x 118 mm
204 white
6844 AGM-204-500
6800-0-2507
201
204
208
35
brown
white
silver metallic
anthracite
6849 AGM-201
6849 AGM-204-500
6849 AGM-208
6849 AGM-35
6800-0-2311
6800-0-2314
6800-0-2313
6800-0-2312
1
1) In combination with a relay/contactor, an RC suppressor 6899 has to be used.
328 Movement detector | Catalogue 2012
1
1
1
1
Order-No.
Pack/Qty
Busch-Watchdog 220 WaveLINE 1) 2) 3)
Wireless movement detector for detecting thermal motion.
With display for detection and status indication.
With ground and rear-field detection.
With planar compensation: +/- 30°.
With high-quality lens for optimum detection.
Detection sensitivity selectable in 3 steps.
Surveillance density: 84 sectors with 336 switching
segments.
All functions controlled by microprocessor.
With automatic range stabilization.
With automatic interference suppression.
With automatic dazzle-proofing.
With automatic battery monitoring.
With brightness-independent test mode for evaluating the
detection zone.
Can be combined with WaveLINE 6701 built-in receiver.
Compatible with WaveLINE KNX gateway TP-RF 6770.
For standalone and group operation.
Switch-off delay: 3 min. (standalone mode), adjustable at
actuator (group operation).
Send frequency: 868 MHz.
Range in free field: approx.100 m
Power supply: 3x 1.5 V batteries, type: mignon cell batteries
( IEC LR06, AA).
Battery life: approx. 5 years
Rated voltage: 4.5 VDetection range: frontal: 16 m, lateral: 16 m
Detection angle: 220 °
Brightness limit value: 0.5 Lux - 300 Lux , Daytime operation
Mounting height: 2.5 m
Protection class (Device): IP 55
Temperature range (Device): -25 °C to 55 °C
Dimensions: (L x W x D): 97 mm x 97 mm x 159 mm
1) In combination with a relay/contactor, an RC suppressor 6899 has to be used.
Busch-Watchdog 220 AlarmLINE 1)
incl. IR remote control
Electronic movement detector for detecting thermal motion.
For potential-free operation.
With additional, separately evaluated detection level (safety
zone).
With optical alarm and second switch output for detection in
the safety zone.
Remote control possible via IR remote control 6841
(included in delivery).
Remote configurable via IR service remote control 6842.
With display for detection and operation mode.
With ground and rear-field detection.
With planar compensation: +/- 30°.
With high-quality lens for optimum detection.
Detection sensitivity selectable in 3 steps.
Surveillance density: 104 sectors with 416 switching
segments.
All functions controlled by microprocessor.
Permanent light and presence simulation can be activated
via remote control.
With automatic range stabilization.
With automatic interference suppression.
With automatic dazzle-proofing.
With brightness-independent test mode for evaluating the
detection zone.
Additional possibility for switch-on via normally open pushbutton switch.
Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec
adjustable.
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz/60 Hz
Outputs: 1x Normally open contact, potential-bound
Suitable for: ohmic, capacitive and inductive loads
Rated current: 10 AX, cos 0.6
Rated power: 2300 W/VA
Control/Signal outputs: 1, Normally open contact, potential
free
Rated power: 0.12 - 2300 W/VA
Detection range: frontal: 16 m, lateral: 16 m
Detection range 2: frontal: 6 m, lateral: 6 m
Detection angle: 220 °
Brightness limit value: 0.5 Lux - 300 Lux , Daytime operation
Mounting height: 2.5 m
Protection class (Device): IP 55
Temperature range (Device): -25 °C to 55 °C
Dimensions: (L x W x D): 97 mm x 97 mm x 159 mm
Article-No.
201
204
208
35
brown
white
silver metallic
anthracite
6745 AGM-201
6745 AGM-204
6745 AGM-208
6745 AGM-35
6700-0-0019
6700-0-0018
6700-0-0021
6700-0-0020
1) Battery not included in delivery.
2) Recommended battery type: lithium batteries: IEC FR06 (L91 AA 1,5V).
3) Alternative battery type: alkaline-manganese batteries: IEC LR06 (AA 1,5V).
1
1/10
1
1
Busch-Watchdog
Product
Article-No.
Order-No.
Pack/Qty
Product
Built-in wireless receiver
3 wire connection (neutral conductor required).
For wireless switching of electrical loads.
For functions: permanent ON/1gang/1way, timer and light
scene control.
For Busch Watchdog® WaveLINE.
For WaveLINE 6721-xx universal signalling unit.
Compatible with WaveLINE KNX gateway TP-RF 6770.
Switch-off delay: 60 to 30 min., adjustable.
Repeater function can be activated for extended range.
Operation also possible via conventional push buttons
(2020 US, 2021/6 UK).
For universal attachment or installation.
For installation in (deep) flush-mounted boxes to German
Standard DIN 49073, Part 1.
Controllable up to 48 transmission addresses.
Send/receive frequency: 868 MHz.
Range in free field: approx.100 m
Control element: Adjustable potentiometer
Display elements: Status indication of output via LED.
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz/60 Hz
Inputs: 1
Polling voltage: 230 V~, Sensing pulse, L-wire
Outputs: 1x Normally open contact
Suitable for: Resistive load
Rated current: 10 A
Output voltage: 230 V~
Rated power: 2300 W
Suitable for: capacitive
Rated current: 10 AX
Output voltage: 230 V~
Rated power: 2300 VA
Suitable for: inductive
Rated current: 10 A, cos 0.6
Output voltage: 230 V~
Rated power: 2300 VA
Protection class (Device): IP 20
Temperature range (Device): -25 °C to 55 °C
Dimensions: (L x W x D): 47 mm x 48 mm x 30 mm
Installation depth: 30 mm
white
6701
6700-0-0022
1/10
Busch-Watchdog 90 ProfessionalLINE 1)
Electronic movement detector for detecting thermal motion.
With display for detection and operation mode.
With ground and rear-field detection.
With planar compensation: +/- 30°.
With high-quality lens for optimum detection.
Surveillance density: 50 sectors with 200 switching
segments.
With brightness-independent test mode for evaluating the
detection zone.
Additional possibility for switch-on via normally open pushbutton switch.
Switch-off delay option: 1 / 3 or 5 min.
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz/60 Hz
Outputs: 1x Normally open contact, potential-bound
Suitable for: ohmic, capacitive and inductive loads
Rated current: 16 AX, cos 0.6
Rated power: 3680 W/VA
Detection range: frontal: 12 m, lateral: 6 m
Detection angle: 90 °
Brightness limit value: 3 Lux / 15 lux / daytime operation
Mounting height: 2.5 m
Protection class (Device): IP 55
Temperature range (Device): -25 °C to 55 °C
Dimensions: (L x W x D): 97 mm x 97 mm x 159 mm
201
204
208
35
brown
white
silver metallic
anthracite
6853 AGM-201
6853 AGM-204-500
6853 AGM-208
6853 AGM-35-500
6800-0-2318
6800-0-2321
6800-0-2320
6800-0-2322
Order-No.
Article-No.
Pack/Qty
Busch-Watchdog 220 ProfessionalLINE 1)
Electronic movement detector for detecting thermal motion.
Remote control possible via IR remote control 6841
(included in delivery).
Remote configurable via IR service remote control 6842.
With display for detection and operation mode.
With ground and rear-field detection.
With planar compensation: +/- 30°.
With high-quality lens for optimum detection.
Detection sensitivity selectable in 3 steps.
Surveillance density: 84 sectors with 336 switching
segments.
All functions controlled by microprocessor.
Permanent light and presence simulation can be activated
via remote control.
With automatic range stabilization.
With automatic interference suppression.
With automatic dazzle-proofing.
With brightness-independent test mode for evaluating the
detection zone.
Additional possibility for switch-on via normally open pushbutton switch.
Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec
adjustable.
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz/60 Hz
Outputs: 1x Normally open contact, potential-bound
Suitable for: ohmic, capacitive and inductive loads
Rated current: 16 AX, cos 0.6
Rated power: 3680 W/VA
Detection range: frontal: 16 m, lateral: 16 m
Detection angle: 220 °
Brightness limit value: 0.5 Lux - 300 Lux , Daytime operation
Mounting height: 2.5 m
Protection class (Device): IP 55
Temperature range (Device): -25 °C to 55 °C
Dimensions: (L x W x D): 97 mm x 97 mm x 159 mm
incl. IR remote control
201
204
208
35
brown
white
silver metallic
anthracite
6845 AGM-201-500
6845 AGM-204-500
6845 AGM-208-500
6845 AGM-35-500
6800-0-2301
6800-0-2300
6800-0-2303
6800-0-2302
1
1/10
1
1
6800-0-2335
6800-0-2334
6800-0-2336
6800-0-2337
1
1/10
1
1
without IR remote control
201
204
35
208
brown
white
anthracite
silver metallic
6845/11AGM-201-500
6845/11AGM-204-500
6845/11 AGM-35-500
6845/11AGM-208-500
1) In combination with a relay/contactor, an RC suppressor 6899 has to be used.
1
1/10
1
1
1) In combination with a relay/contactor, an RC suppressor 6899 has to be used.
Technical information
www.BUSCH-JAEGER-catalogue.com
Catalogue 2012 | Movement detector 329
Busch-Watchdog
Product
Article-No.
Order-No.
Pack/Qty
Busch-Watchdog 220 SelectLINE 1)
Electronic movement detector for detecting thermal motion.
Remote control possible via IR mobile remote control 6841.
Remote configurable via IR service remote control 6842.
With display for detection and operation mode.
With planar compensation: +/- 30°.
With high-quality lens for optimum detection.
Detection sensitivity selectable in 3 steps.
Surveillance density: 28 sectors with 112 switching
segments.
All functions controlled by microprocessor.
Permanent light and presence simulation can be activated
via remote control.
With automatic range stabilization.
With automatic interference suppression.
With automatic dazzle-proofing.
With brightness-independent test mode for evaluating the
detection zone.
Additional possibility for switch-on via normally open pushbutton switch.
Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec
adjustable.
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz/60 Hz
Outputs: 1x Normally open contact, potential-bound
Suitable for: ohmic, capacitive and inductive loads
Rated current: 16 AX, cos 0.6
Rated power: 3680 W/VA
Detection range: frontal: 16 m, lateral: 16 m
Detection angle: 220 °
Brightness limit value: 0.5 Lux - 300 Lux , Daytime operation
Mounting height: 1.1 m - 1.5 m alternative: 2.5 m
Protection class (Device): IP 55
Temperature range (Device): -25 °C to 55 °C
Dimensions: (L x W x D): 97 mm x 97 mm x 159 mm
204 white
35 anthracite
6845 AGS-204
6845 AGS-35
6800-0-2315
6800-0-2316
1/10
1
1) In combination with a relay/contactor, an RC suppressor 6899 has to be used.
Busch Watchdog 280 ProfessionalLINE 1)
incl. IR remote control
Electronic movement detector for detecting thermal motion.
Remote control possible via IR remote control 6841
(included in delivery).
Remote configurable via IR service remote control 6842.
With display for detection and operation mode.
With ground and rear-field detection.
With planar compensation: +/- 30°.
With high-quality lens for optimum detection.
Detection sensitivity selectable in 3 steps.
Surveillance density: 110 sectors with 440 switching
segments.
All functions controlled by microprocessor.
Permanent light and presence simulation can be activated
via remote control.
With automatic range stabilization.
With automatic interference suppression.
With automatic dazzle-proofing.
With brightness-independent test mode for evaluating the
detection zone.
Additional possibility for switch-on via normally open pushbutton switch.
Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec
adjustable.
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz/60 Hz
Outputs: 1x Normally open contact, potential-bound
Suitable for: ohmic, capacitive and inductive loads
Rated current: 16 AX, cos 0.6
Rated power: 3680 W/VA
Detection range: frontal: 16 m, lateral: 16 m
Detection angle: 280 °
Brightness limit value: 0.5 Lux - 300 Lux , Daytime operation
Mounting height: 2.5 m
Protection class (Device): IP 55
Temperature range (Device): -25 °C to 55 °C
Dimensions: (L x W x D): 97 mm x 97 mm x 159 mm
204 white
201 brown
35 anthracite
6846 AGM-204-500
6846 AGM-201-500
6846 AGM-35-500
6800-0-2307
6800-0-2308
6800-0-2309
1) In combination with a relay/contactor, an RC suppressor 6899 has to be used.
330 Movement detector | Catalogue 2012
1
1
1
Product
Article-No.
Order-No.
Pack/Qty
Corner adapter
For Busch Watchdog 220 Professional/SelectLINE.
For detection on two sides of the house, in combination
with Busch Watchdog® 280 ProfessionalLINE.
Assembly is on the corner of the house.
Suitable for mounting on down-pipes
For flush or surface wiring.
Mounting height: 2.5 m
Dimensions: (L x W x D): 97 mm x 100 mm x 60 mm
201 brown
204 white
35 anthracite
6887-201-500
6887-204-500
6887-35-500
6899-0-0293
6899-0-0292
6899-0-0294
1
1
1
IR remote control 1)
For Busch Watchdog 220 Professional/SelectLINE.
For Busch Watchdog 280 ProfessionalLINE.
For Busch Watchdog 220 AlarmLINE.
The following functions can be activated:
For function: Permanent lighting ON/OFF (4 hr).
Presence simulation ON/OFF.
With coded transmission signal.
Power supply: lithium button cell battery Type CR2025.
Range: frontal 6 m
Rated voltage: 3 VDimensions: (L x W x D): 87 mm x 40 mm x 7 mm
6841-500
6899-0-0296
1
1) Battery included in delivery.
IR Service remote control 1)
For Busch Watchdog 220 Professional/SelectLINE.
For Busch Watchdog 280 ProfessionalLINE.
For Busch Watchdog 220 AlarmLINE.
The following functions/settings can be activated depending
on device type:
For function: Permanent lighting ON/OFF (4 hr).
Presence simulation ON/OFF.
For function: Optical alarm active/inactive.
For function: Switch output safety zone active/inactive.
Test operation ON/OFF.
Direction detection ON/OFF.
Automatic switch-off (after 90 min.) ON/OFF.
Daytime operation of safety zone active/inactive.
Potential-free operation active/inactive.
Sensitivity - / normal/ +.
Reset to factory default settings.
With coded transmission signal.
Power supply: lithium button cell battery Type CR2025.
Range: frontal 6 m
Rated voltage: 3 VDimensions: (L x W x D): 94 mm x 53 mm x 7 mm
6842
1) Battery included in delivery.
6899-0-0299
1
Busch-Watchdog
Product
Article-No.
Order-No.
Pack/Qty
Product
Busch-Watchdog® Presence tech BasicLINE mini 1) 2)
For switching lighting systems that depend on brightness
and movement.
Low mounting height due to separate sensor/actuator
concept.
Detection range (installation height 3m, up to 6m in
diameter).
Continuously variable detection sensitivity.
With brightness-independent test mode for evaluating the
detection zone.
With detection display in test mode.
Ceiling installation using integrated spring bracket.
Surveillance density: 19 sectors with 76 switching segments.
Switch-off delay: approx. 1 sec - 15 min or short-time pulse
adjustable.
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz
Outputs: 1x Normally open contact, potential-bound
Suitable for: 230 V incandescent lamps
Rated power: 2000 W
Suitable for: Energy-saving bulbs
Rated power: 7 - 400 W
Suitable for: Fluorescent lamps
Rated current: 4 AX, cos 0.5
Rated power: 1000 W/VA
Detection angle: 360 °
Brightness limit value: 10 Lux - 1000 Lux , Daytime
operation
Mounting height: 2 m - 5 m
Protection class (Device): IP 20
Protection class (Sensor): IP 40
Temperature range (Device): 0 °C to 45 °C
Installation depth: 77 mm
IEC 60669-2-1
alpine white
6811 EB-500
6800-0-2517
Article-No.
Order-No.
Pack/Qty
Busch-Watchdog® Presence tech BasicLINE 1)
For switching lighting systems that depend on brightness
and movement.
For semiautomatic and fully automatic operation.
Additional activation/deactivation possibility through
pushbutton input.
Detection range (for installation height 2.5 m, circular, 7 m
in diameter).
Adaptation of the detection range possible using the
included masking elements.
With brightness-independent test mode for evaluating the
detection zone.
With detection display in test mode.
Mounting possibility in combination with built-in installation
boxes and device sockets.
Ceiling installation using integrated spring bracket.
Adjustment elements accessible on the front side.
Low mounting height (31 mm)
Surveillance density: 32 sectors with 128 switching
segments.
Switch-off delay: approx. 5 sec - 30 min or short-time pulse
adjustable.
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz
Outputs: 1x Normally open contact, potential-bound
Suitable for: 230 V incandescent lamps
Rated power: 2000 W
Suitable for: Energy-saving bulbs
Rated power: 7 - 400 W
Suitable for: Fluorescent lamps
Rated current: 4 AX, cos 0.5
Rated power: 1000 W/VA
Detection angle: 360 °
Brightness limit value: 10 Lux - 2000 Lux
Mounting height: 2 m - 4 m
Protection class (Device): IP 40
Temperature range (Device): 0 °C to 45 °C
Dimensions: (L x W x D): 111 mm x 111 mm x 59 mm
Installation depth: 41 mm
IEC 60669-2-1
1/30
1) When mounting the actuator through the drilled hole of the sensor an installation depth of ≥ 205 mm is
to be taken into account.
2) In combination with a relay/contactor, an RC suppressor 6899 has to be used.
alpine white
6814 U-500
6800-0-2518
1/24
1) In combination with a relay/contactor, an RC suppressor 6899 has to be used.
Technical information
www.BUSCH-JAEGER-catalogue.com
Catalogue 2012 | Movement detector 331
Busch-Watchdog
Product
Article-No.
Order-No.
Pack/Qty
Busch-Watchdog® Presence tech BasicLINE Corridor 1) 2)
For switching lighting systems that depend on brightness
and movement.
Additional activation/deactivation possibility through
pushbutton input.
Detection range (for installation height 2.5 m, circular, up to
24 m in diameter).
Adaptation of the detection range possible using the
included masking elements.
With brightness-independent test mode for evaluating the
detection zone.
With detection display in test mode.
With automatic motion detection.
With automatic sensitivity adaptation.
Mounting possibility in combination with built-in installation
boxes and device sockets.
Ceiling installation using included dust protection socket.
Adjustment elements accessible on the front side.
Surveillance density: 215 sectors with 860 switching
segments.
Switch-off delay: approx. 10 sec - 30 min or short-time
pulse adjustable.
Remote control possible via IR service manual transmitter
6843.
Use outdoors possible due to combination with surfacemounted housing 6888.
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz
Outputs: 1x Normally open contact, potential-bound
Suitable for: 230 V incandescent lamps
Rated power: 2000 W
Suitable for: Energy-saving bulbs
Rated power: 7 - 400 W
Suitable for: Fluorescent lamps
Rated current: 4 AX, cos 0.5
Rated power: 1000 W/VA
Detection angle: 360 °
Brightness limit value: 10 Lux - 2000 Lux
Mounting height: 2 m - 3 m
Protection class (Device): IP 40
Temperature range (Device): -20 °C to 45 °C
Dimensions: (L x W x D): 110 mm x 110 mm x 70 mm
Installation depth: 48 mm
IEC 60669-2-1
alpine white
6818 U-500
6800-0-2519
1/18
Surface mounting box
For Busch-Watchdog® Presence tech BasicLINE Corridor
6818 U.
For surface mounting and increase of the protection type.
Protection class (Device): IP 54
Temperature range (Device): -20 °C to 45 °C
Dimensions: (L x W x D): 106 mm x 106 mm x 26 mm
6888
6899-0-2305
1/90
Protective basket
For ceiling presence detectors.
for Busch Watchdog Presence tech (6813-101-500),
For Busch-Watchdog® Presence tech Dualline 6813/11-xxx.
For Busch-Watchdog® Presence tech BasicLINE 6814 U.
For Busch-Watchdog® Presence tech BasicLINE Corridor
6818 U.
For Busch Smoke Alarm® BasicLINE (6830-24/0x).
For Busch Smoke Alarm® ProfessionalLINE (6826-84).
For Busch Heat Alarm ProfessionalLINE (6827-84).
Also applicable in connection with surface-mounted
housings 6885-xxx and 6888.
For Busch-Watchdog Presence KNX 6161/10-xxx and
6131/11-xxx.
Dimensions: (L x W x D): 180 mm x 180 mm x 98 mm
alpine white
6898
6899-0-2304
Article-No.
Order-No.
1/12
6843
6800-0-2511
1/120
1) Battery included in delivery.
Busch-Watchdog Presence tech 1)
For switching and dimming lighting systems that depend on
brightness and movement.
For constant light regulation in combination with Dimmer
insert 6593 U or 6550 U-101.
For heating/air-conditioning/ventilation adjustment in
combination with serial insert 6402 U.
For relay insert switch 6401 U-102, 6402 U and
6812 U-101.
For MOS-Fet insert 6804 U-101.
For extension insert 6805 U.
Remote control possible via IR mobile remote control 6010-25.
Surveillance zone (for installation height 2.5 m): circular, 8 m
diameter.
Intelligent turn-on delay.
Surveillance density: 72 sectors with 640 switching
segments.
Switch-off delay: approx. 10 sec - 30 min or short-time
pulse 1 sec adjustable.
Detection angle: 360 °
Brightness limit value: 5 Lux - 1000 Lux
Mounting height: 2 m - 8 m
Protection class (Device): IP 20
Temperature range (Device): 0 °C to 35 °C
60669-2-1, British Standard EN 60669-2-1
6800-0-2178
6800-0-2324
1/10
1
1) Please order the respective flush mounted insert separately.
Busch-Watchdog Presence tech DualLINE 1)
For switching and dimming lighting systems that depend on
brightness and movement.
For constant light regulation in combination with Dimmer
insert 6593 U or 6550 U-101.
For the control of 2 independent light strips in combination
with 2gang 1way unit 6402 U.
For semiautomatic and fully automatic operation.
For relay insert switch 6401 U-102, 6402 U and
6812 U-101.
For MOS-Fet insert 6804 U-101.
For extension insert 6805 U.
Remote control possible via IR mobile remote control 6010-25.
Surveillance zone (for installation height 2.5 m): circular, 8 m
diameter.
Intelligent turn-on delay.
Surveillance density: 72 sectors with 640 switching
segments.
Switch-off delay: approx. 1 sec - 20 min or short-time pulse
adjustable.
Detection angle: 360 °
Brightness limit value: 5 Lux - 1000 Lux
Mounting height: 2 m - 8 m
Protection class (Device): IP 20
Temperature range (Device): 0 °C to 35 °C
60669-2-1, British Standard EN 60669-2-1
24 studio white matt 6813/11-24-500
183 aluminium silver 6813/11-183-500
1) Please order the respective flush mounted insert separately.
332 Movement detector | Catalogue 2012
Pack/Qty
IR Service remote control 1)
For Busch-Watchdog® Presence tech BasicLINE Corridor
6818 U.
The following functions/settings can be implemented.
Permanent light on/off (8 h).
Setting of the brightness limit value.
Setting of the current ambient light value as the brightness
limit value.
Setting of switch-off delay or short-time pulse.
Saving and duplication of the saved values.
Activate test mode.
Reset to factory default settings.
Activation/deactivation of the button lock.
Power supply: lithium button cell battery Type CR2032.
Range: frontal 3 m
Rated voltage: 3 VDimensions: (L x W x D): 106 mm x 50 mm x 8 mm
24 studio white matt 6813-101-500
183 aluminium silver 6813-183-101-500
1) The maximum detection range depends on the mounting site and ambient conditions.
2) In combination with a relay/contactor, an RC suppressor 6899 has to be used.
alpine white
Product
6800-0-2350
6800-0-2352
1
1
Busch-Watchdog
Product
Article-No.
Order-No.
Pack/Qty
Surface mounting box
For Busch Watchdog Presence tech.
For the installation of a flush-mounted insert in combination
with the Busch-Watchdog Presence tech 6813(/11)-xx-(101)
or the Busch-Watchdog Presence tech KNX 6131/10-xxx or
Busch-Watchdog Presence tech DualLINE KNX 6131/11-xxx.
Protection class (Device): IP 20
24 studio white matt 6885-500
183 aluminium silver 6885-183-500
6899-0-0282
6899-0-0298
1/10
1
Busch-Watchdog MOS-Fet Insert 1) 2) 3) 4) 5) 6)
2-wire connection.
For Busch Watchdog 180 flush mounted Sensor Standard
6810-21x-101.
For Busch Watchdog 180 flush mounted sensor Comfort II
6800-xxx-104 and 6800-xxx-104M.
For Busch Watchdog Presence tech 6813-xxx-101 und
6813/11-xxx.
Combinable with Busch Watchdog extension insert 6805 U.
Operation also possible via conventional push buttons
(2020 US, 2021/6 UK).
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz/60 Hz
Suitable for: 230 V incandescent lamps, 230 V halogen
lamps and low-voltage halogen lamps with conventional
transformers or Busch Electronic Transformer.
Rated power: 60 - 420 W/VA
Temperature range (Device): 0 °C to 35 °C
British Standard EN 60669-2-1
6804 U-101-500
1)
2)
3)
4)
5)
6)
6800-0-2219
1/10
In case of electronic transformers, 5 % transformer losses.
In the case of conventional transformers, take ~20% transformer loss into account.
Cannot be connected to compact fluorescent lamps, ECG or CCG.
Not suitable for activating the staircase time delay.
Cannot be used to control relais.
Requires an NIS international socket, E-No. 372507676.
6800-0-2160
Order-No.
Article-No.
Busch-Universal master dimmer Insert 1) 2) 3)
Touch Dimmer
with light-level memory and intelligence for universal
operation
Selectable Soft-ON/OFF function and memory function.
Capacity expansion via output-side, parallel connectable
load line with a power module 6594 U up to 735 W/VA
possible.
For incandescent lamps, 230 V tungsten halogen lamps and
low-voltage halogen lamps with conventional transformers
or electronic transformers.
Short-circuit protected, overload-protected.
With touch control.
Operation also possible via conventional push buttons
(2020 US, 2021/6 UK).
Without control cover.
For control cover with control lamp 6543-xxx-10x.
For Busch-Remote control IR control cover 6066-xxx-10x
and 6067-xxx-10x.
For Comfort timer control element 6455.
For Busch Watchdog 180 flush mounted Sensor Standard
6810-21x-101.
For Busch Watchdog 180 flush mounted sensor Comfort II
6800-xxx-104 and 6800-xxx-104M.
For Busch Watchdog Presence tech 6813-xxx-101 und
6813/11-xxx.
Combinable with Busch Watchdog extension insert 6805 U.
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz
Rated power: 60 - 420 W/VA
IEC 60669-2-1, British Standard EN 60669-2-1
6590-0-0171
6593 U-500
1/10
1/10
Busch-Universal relay switch insert
3 wire connection (neutral conductor required).
For Busch Watchdog 180 flush mounted Sensor Standard
6810-21x-101.
For Busch Watchdog 180 flush mounted sensor Comfort II
6800-xxx-104 and 6800-xxx-104M.
For Busch Watchdog 180 FP sensor for All Weather 44®
6800-3x-102C.
For Busch Watchdog Presence tech 6813-xxx-101 und
6813/11-xxx.
For Comfort timer control element 6455.
For Busch-Remote control IR control cover 6067-xxx-10x.
For control cover with control lamp 6543-xxx-10x.
Combinable with Busch Watchdog extension insert 6805 U.
Operation also possible via conventional push buttons
(2020 US, 2021/6 UK).
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz/60 Hz
Outputs: 1x Normally open contact, potential-bound
Suitable for: 230 V incandescent lamps, 230 V halogen
lamps, fluorescent lamps and low-voltage halogen lamps,
that are operated via transformers.
Rated current: 10 AX
Rated power: 2300 W/VA
Temperature range (Device): -25 °C to 55 °C
British Standard EN 60669-2-1
6401 U-102-500
Technical information
www.BUSCH-JAEGER-catalogue.com
Pack/Qty
1) In the case of conventional transformers, take ~20% transformer loss into account.
2) In case of electronic transformers, 5 % transformer losses.
3) In conjunction with 6800-xxx-104 (M) a Soft Off can be adjusted.
Busch-Watchdog relay mechanism
3 wire connection (neutral conductor required).
For Busch Watchdog 180 flush mounted Sensor Standard
6810-21x-101.
For Busch Watchdog 180 flush mounted sensor Comfort II
6800-xxx-104 and 6800-xxx-104M.
For Busch Watchdog Presence tech 6813-xxx-101 und
6813/11-xxx.
Rated voltage: 230 V, +10 % / -10 %
Rated frequency: 50 Hz
Outputs: 1x Normally open contact, potential-bound
Suitable for: 230 V incandescent lamps, 230 V halogen
lamps, fluorescent lamps and low-voltage halogen lamps,
that are operated via transformers.
Rated power: 700 W/VA
Temperature range (Device): 0 °C to 55 °C
British Standard EN 60669-2-1
6812 U-101-500
Product
6401-0-0049
1/10
Catalogue 2012 | Movement detector 333
Busch-Watchdog
Product
Article-No.
Order-No.
Pack/Qty
Busch-Memory touch-type controller 1) 2)
3 wire connection (neutral conductor required).
For controlling ballast units for fluorescent lamps with
control output 1-10 V DC, control current max. 50 mA DC.
For control cover with control lamp 6543-xxx-10x.
For Busch-Remote control IR control cover 6066-xxx-10x
and 6067-xxx-10x.
For Comfort timer control element 6455.
For Busch Watchdog 180 flush mounted Sensor Standard
6810-21x-101.
For Busch Watchdog 180 flush mounted sensor Comfort II
6800-xxx-104 and 6800-xxx-104M.
For Busch Watchdog Presence tech 6813-xxx-101 und
6813/11-xxx.
Combinable with Busch Watchdog extension insert 6805 U.
Operation also possible via conventional push buttons
(2020 US, 2021/6 UK).
For LED control via control gears
Without control cover.
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz
Rated power: 700 W/VA
IEC 60669-2-1, British Standard EN 60669-2-1
6550 U-101-500
6550-0-0042
1
Product
6402 U-500
6401-0-0051
1/10
Insert for combination with flush-mounted inserts 1)
3 wire connection (neutral conductor required).
For extending Busch Watchdog 180 flush mounted and
Busch Watchdog Presence tech installations.
For combination with relay insert 6401 U-102 and 6402 U.
For combination with MOS-Fet insert 6804 U-101.
For combination with Dimmer insert 6593 U and
6550 U-101.
For Busch Watchdog 180 flush mounted Sensor Standard
6810-21x-101.
For Busch Watchdog 180 flush mounted sensor Comfort II
6800-xxx-104 and 6800-xxx-104M.
For Busch Watchdog Presence tech 6813-xxx-101 und
6813/11-xxx.
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz
Control/Signal outputs: 1, electronic output, potential-bound
Temperature range (Device): 0 °C to 35 °C
6805 U-500
1) Not combinable with relay switch insert 6812 U-101.
334 Movement detector | Catalogue 2012
6800-0-2161
1/10
Order-No.
Pack/Qty
Busch-Watchdog 180 flush mounted standard sensor 1)
With select-lens
For automatic switching of devices dependent on motion
and brightness.
For relay insert switch 6401 U-102, 6402 U and
6812 U-101.
For MOS-Fet insert 6804 U-101.
For Dimmer insert 6593 U.
For extension insert 6805 U.
Surveillance density: 18 sectors with 72 switching segments.
Switch-off delay: 80 sec.
Detection range: frontal: 12 m, lateral: 8 m
Detection angle: 180 °
Brightness limit value: 5 Lux - 250 Lux , Daytime operation
Mounting height: 0.8 m - 1.2 m
Protection class (Sensor): IP 20
Temperature range (Device): 0 °C to 35 °C
Busch-Duro 2000® SI
212 white
6810-212-101-500
6800-0-2162
1
214 alpine white
Reflex SI
6810-214-101-500
6800-0-2163
1
1) Please order the respective flush mounted insert separately.
Busch-Watchdog 180 flush mounted comfort sensor II 1)
With select-lens
For automatic switching of devices dependent on motion
and brightness.
For relay insert switch 6401 U-102, 6402 U and
6812 U-101.
For MOS-Fet insert 6804 U-101.
For Dimmer insert 6593 U.
For extension insert 6805 U.
With integrated selector switch for ON-AUTOMATIC-OFF
(lockable).
Soft phase-out: In combination with the 6593 U (mode of
operation: Soft OFF) the illumination is dimmed down within
60 sec and switched off.
Surveillance density: 18 sectors with 72 switching segments.
Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec
adjustable.
Detection range: frontal: 12 m, lateral: 8 m
Detection angle: 180 °
Brightness limit value: 5 Lux - 250 Lux , Daytime operation
Mounting height: 0.8 m - 1.2 m
Protection class (Sensor): IP 20
Temperature range (Device): 0 °C to 35 °C
1) Non-illuminable.
2) with integrated making-current limiter
Busch-Universal 2gang 1way insert
3 wire connection (neutral conductor required).
For the serial switch operating mode: 2 separate outputs, 2
separate extension inputs.
For operation mode time switch: Output 1 (e.g. illumination),
Output 2: switch-on/off delayed, dependent on output 1
(e.g. fan control).
For Busch Watchdog 180 flush mounted Sensor Standard
6810-21x-101.
For Busch Watchdog 180 flush mounted sensor Comfort II
6800-xxx-104 and 6800-xxx-104M.
For Busch Watchdog Presence tech 6813-xxx-101 und
6813/11-xxx.
For Busch-Remote control IR control cover 6066-xxx-10x
and 6067-xxx-10x.
For control cover 6430-xxx-10x and 6543-xxx-10x.
Combinable with Busch Watchdog extension insert 6805 U.
Operation also possible via conventional push buttons
(2020 US, 2021/6 UK).
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz
Outputs: 2x Normally open contact, potential-bound
Suitable for: 230 V incandescent lamps, 230 V halogen
lamps, fluorescent lamps and low-voltage halogen lamps,
that are operated via transformers.
Rated current: 10 AX
Rated power: 2300 W/VA
Temperature range (Device): 0 °C to 35 °C
British Standard EN 60669-2-1
Article-No.
Busch-Duro 2000® SI
212 white
6800-212-104-500
6800-0-2164
1
212 white
Reflex SI
6800-212-104-500
6800-0-2164
1
1) Please order the respective flush mounted insert separately.
Busch-Watchdog
Product
Article-No.
20 platinum )
21 bronze 2)
22G ivory
24 studio white matt
24G studio white
260 palladium 2)
266 titanium 2)
2
Order-No.
Pack/Qty
Product
Order-No.
Article-No.
Pack/Qty
Busch-Watchdog 180 flush mounted comfort sensor II 1)
With select-lens
For automatic switching of devices dependent on motion
and brightness.
For relay insert switch 6401 U-102, 6402 U and
6812 U-101.
For MOS-Fet insert 6804 U-101.
For Dimmer insert 6593 U.
For extension insert 6805 U.
With integrated selector switch for ON-AUTOMATIC-OFF
(lockable).
Soft phase-out: In combination with the 6593 U (mode of
operation: Soft OFF) the illumination is dimmed down within
60 sec and switched off.
Surveillance density: 18 sectors with 72 switching segments.
Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec
adjustable.
Detection range: frontal: 12 m, lateral: 8 m
Detection angle: 180 °
Brightness limit value: 5 Lux - 250 Lux , Daytime operation
Mounting height: 0.8 m - 1.2 m
Protection class (Sensor): IP 20
Temperature range (Device): 0 °C to 35 °C
Busch-Watchdog 180 flush mounted comfort sensor II 1)
With select-lens
For automatic switching of devices dependent on motion
and brightness.
For relay insert switch 6401 U-102, 6402 U and
6812 U-101.
For MOS-Fet insert 6804 U-101.
For Dimmer insert 6593 U.
For extension insert 6805 U.
With integrated selector switch for ON-AUTOMATIC-OFF
(lockable).
Soft phase-out: In combination with the 6593 U (mode of
operation: Soft OFF) the illumination is dimmed down within
60 sec and switched off.
Surveillance density: 18 sectors with 72 switching segments.
Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec
adjustable.
Detection range: frontal: 12 m, lateral: 8 m
Detection angle: 180 °
Brightness limit value: 5 Lux - 250 Lux , Daytime operation
Mounting height: 0.8 m - 1.2 m
Protection class (Sensor): IP 20
Temperature range (Device): 0 °C to 35 °C
alpha
future® linear
6800-20-104
6800-21-104
6800-22G-104
6800-24-104-500
6800-24G-104-500
6800-260-104
6800-266-104
6800-0-2068
6800-0-2069
6800-0-2070
6800-0-2168
6800-0-2170
6800-0-2118
6800-0-2120
1
1
1
1
1
1/10
1/10
1) Please order the respective flush mounted insert separately.
2) Surface painted.
Busch-Watchdog 180 flush mounted comfort sensor II 1)
With select-lens
For automatic switching of devices dependent on motion
and brightness.
For relay insert switch 6401 U-102, 6402 U and
6812 U-101.
For MOS-Fet insert 6804 U-101.
For Dimmer insert 6593 U.
For extension insert 6805 U.
With integrated selector switch for ON-AUTOMATIC-OFF
(lockable).
Soft phase-out: In combination with the 6593 U (mode of
operation: Soft OFF) the illumination is dimmed down within
60 sec and switched off.
Surveillance density: 18 sectors with 72 switching segments.
Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec
adjustable.
Detection range: frontal: 12 m, lateral: 8 m
Detection angle: 180 °
Brightness limit value: 5 Lux - 250 Lux , Daytime operation
Mounting height: 0.8 m - 1.2 m
Protection class (Sensor): IP 20
Temperature range (Device): 0 °C to 35 °C
81 anthracite
6800-81-104
82 savanna/
ivory white
6800-82-104
83 aluminium silver 2) 6800-83-104
84 davos/studio white 6800-84-104
884 studio white
matt 2)
6800-884-104
6800-885-104
885 black matt 2)
6800-0-2268
1
6800-0-2099
6800-0-2325
6800-0-2101
1/10
1
1/10
6800-0-2497
6800-0-2506
1
1
solo®
82 savanna/
ivory white
6800-82-104
84 davos/studio white 6800-84-104
*
87 toscana/purple ) 6800-87-104
803 meteor/
grey metallic 2)
6800-803-104
815 sahara/yellow
6800-815-104
6800-0-2099
6800-0-2101
6800-0-2107
1/10
1/10
1
6800-0-2484
6800-0-2482
1
1
Busch-axcent®
84 davos/studio white 6800-84-104
6800-0-2101
1/10
6800-0-2268
1
6800-0-2099
6800-0-2101
1/10
1/10
6800-0-2343
1
carat
81 anthracite
6800-81-104
82 savanna/
ivory white
6800-82-104
84 davos/studio white 6800-84-104
®
866 stainless steel
pure stainless steel 2)
6800-866-104
1) Please order the respective flush mounted insert separately.
2) Surface painted.
*) Phase-out type
impuls
74 alpine white
79 champagne
metallic 2)
72 ivory
774 studio white
matt 2)
775 black matt 2)
777 blackberry 2)
783 aluminium silver 2)
6800-74-104-500
6800-0-2172
1
6800-79-104
6800-72-104
6800-0-2081
6800-0-2338
1
1/10
6800-774-104
6800-775-104
6800-777-104
6800-783-104
6800-0-2504
6800-0-2502
6800-0-2357
6800-0-2340
1
1
1
1
1) Please order the respective flush mounted insert separately.
2) Surface painted.
Technical information
www.BUSCH-JAEGER-catalogue.com
Catalogue 2012 | Movement detector 335
Busch-Watchdog
Product
Article-No.
Order-No.
Pack/Qty
Product
Busch-Watchdog 180 flush mounted comfort sensor II 1) 2)
With multi-lens
For automatic switching of devices dependent on motion
and brightness.
For down-to-ground detection.
For relay insert switch 6401 U-102, 6402 U and
6812 U-101.
For MOS-Fet insert 6804 U-101.
For Dimmer insert 6593 U.
For extension insert 6805 U.
With integrated selector switch for ON-AUTOMATIC-OFF
(lockable).
Soft phase-out: In combination with the 6593 U (mode of
operation: Soft OFF) the illumination is dimmed down within
60 sec and switched off.
Surveillance density: 28 sectors with 112 switching
segments.
Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec
adjustable.
Detection range: frontal: 15 m, lateral: 5 m
Detection angle: 180 °
Brightness limit value: 5 Lux - 250 Lux , Daytime operation
Mounting height: 0.8 m - 1.2 m alternative: 2.5 m
Protection class (Sensor): IP 20
Temperature range (Device): 0 °C to 35 °C
6800-212-104M-500
6800-0-2166
1
214 alpine white
Reflex SI
6800-214-104M-500
6800-0-2167
1
1) installation: slide switch top.
2) Please order the respective flush mounted insert separately.
Busch-Watchdog 180 flush mounted comfort sensor II 1) 2)
With multi-lens
For automatic switching of devices dependent on motion
and brightness.
For down-to-ground detection.
For relay insert switch 6401 U-102, 6402 U and
6812 U-101.
For MOS-Fet insert 6804 U-101.
For Dimmer insert 6593 U.
For extension insert 6805 U.
With integrated selector switch for ON-AUTOMATIC-OFF
(lockable).
Soft phase-out: In combination with the 6593 U (mode of
operation: Soft OFF) the illumination is dimmed down within
60 sec and switched off.
Surveillance density: 28 sectors with 112 switching
segments.
Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec
adjustable.
Detection range: frontal: 15 m, lateral: 5 m
Detection angle: 180 °
Brightness limit value: 5 Lux - 250 Lux , Daytime operation
Mounting height: 0.8 m - 1.2 m alternative: 2.5 m
Protection class (Sensor): IP 20
Temperature range (Device): 0 °C to 35 °C
alpha
1) installation: slide switch top.
2) Please order the respective flush mounted insert separately.
3) Surface painted.
336 Movement detector | Catalogue 2012
Pack/Qty
impuls
212 white
6800-20-104M
6800-21-104M
6800-22G-104M
6800-24G-104M-500
6800-260-104M
6800-266-104M
Order-No.
Busch-Watchdog 180 flush mounted comfort sensor II 1) 2)
With multi-lens
For automatic switching of devices dependent on motion
and brightness.
For down-to-ground detection.
For relay insert switch 6401 U-102, 6402 U and
6812 U-101.
For MOS-Fet insert 6804 U-101.
For Dimmer insert 6593 U.
For extension insert 6805 U.
With integrated selector switch for ON-AUTOMATIC-OFF
(lockable).
Soft phase-out: In combination with the 6593 U (mode of
operation: Soft OFF) the illumination is dimmed down within
60 sec and switched off.
Surveillance density: 28 sectors with 112 switching
segments.
Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec
adjustable.
Detection range: frontal: 15 m, lateral: 5 m
Detection angle: 180 °
Brightness limit value: 5 Lux - 250 Lux , Daytime operation
Mounting height: 0.8 m - 1.2 m alternative: 2.5 m
Protection class (Sensor): IP 20
Temperature range (Device): 0 °C to 35 °C
Busch-Duro 2000® SI
20 platinum 3)
21 bronze 3)
22G ivory
24G studio white
260 palladium 3)
266 titanium 3)
Article-No.
6800-0-2084
6800-0-2085
6800-0-2086
6800-0-2171
6800-0-2119
6800-0-2121
1
1
1
1
1/10
1/10
72 ivory
74 alpine white
79 champagne
metallic 3)
774 studio white
matt 3)
775 black matt 3)
777 blackberry 3)
783 aluminium silver 3)
6800-72-104M
6800-74-104M-500
6800-0-2339
6800-0-2173
1
1
6800-79-104M
6800-0-2097
1
6800-774-104M
6800-775-104M
6800-777-104M
6800-783-104M
6800-0-2505
6800-0-2503
6800-0-2358
6800-0-2341
1
1
1
1
1) installation: slide switch bottom.
2) Please order the respective flush mounted insert separately.
3) Surface painted.
Busch-Watchdog
Product
Article-No.
Order-No.
Pack/Qty
Busch-Watchdog 180 flush mounted comfort sensor II 1) 2)
With multi-lens
For automatic switching of devices dependent on motion
and brightness.
For down-to-ground detection.
For relay insert switch 6401 U-102, 6402 U and
6812 U-101.
For MOS-Fet insert 6804 U-101.
For Dimmer insert 6593 U.
For extension insert 6805 U.
With integrated selector switch for ON-AUTOMATIC-OFF
(lockable).
Soft phase-out: In combination with the 6593 U (mode of
operation: Soft OFF) the illumination is dimmed down within
60 sec and switched off.
Surveillance density: 28 sectors with 112 switching
segments.
Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec
adjustable.
Detection range: frontal: 15 m, lateral: 5 m
Detection angle: 180 °
Brightness limit value: 5 Lux - 250 Lux , Daytime operation
Mounting height: 0.8 m - 1.2 m alternative: 2.5 m
Protection class (Sensor): IP 20
Temperature range (Device): 0 °C to 35 °C
future® linear
81 anthracite
6800-81-104M
82 savanna/
ivory white
6800-82-104M
83 aluminium silver 3) 6800-83-104M
84 davos/studio white 6800-84-104M
884 studio white
matt 3)
6800-884-104M
6800-885-104M
885 black matt 3)
6800-0-2269
1
6800-0-2100
6800-0-2327
6800-0-2102
1
1
1/10
6800-0-2498
6800-0-2500
1
1
Product
Order-No.
Article-No.
Pack/Qty
Busch-Watchdog 180 flush mounted comfort sensor II
for All Weather 44® 1) 2)
With combi-lens
For automatic switching of devices dependent on motion
and brightness.
For use outdoors.
For down-to-ground detection.
For relay switch insert 6401 U-102.
IP 44 only in conjunction with cover frames All Weather 44®.
Surveillance density: 40 sectors with 160 switching
segments.
Switch-off delay: 10 sec to 30 min or short-time pulse 1 sec
adjustable.
With screw-type terminal.
Detection range: frontal: 15 m, lateral: 10 m
Detection angle: 180 °
Brightness limit value: 5 Lux - 250 Lux , Daytime operation
Mounting height: 0.8 m - 1.2 m alternative: 2.5 m
Protection class (Sensor): IP 44
Temperature range (Device): -25 °C to 55 °C
Position for installation: vertical
31
32
33
34
35
brown
white
aluminium silver
alpine white
anthracite
6800-31-102C
6800-32-102C
6800-33-102C
6800-34-102C
6800-35-102C
6800-0-2353
6800-0-1898
6800-0-2354
6800-0-1674
6800-0-1740
1
1
1
1
1
1) Delivered with sealing ring.
2) Please order the respective flush mounted insert separately.
solo®
82 savanna/
ivory white
6800-82-104M
84 davos/studio white 6800-84-104M
*
87 toscana/purple ) 6800-87-104M
803 meteor/
grey metallic 3)
6800-803-104M
815 sahara/yellow
6800-815-104M
6800-0-2100
6800-0-2102
6800-0-2108
1
1/10
1
RC-quenching circuit
For protection against the damage or destruction of
electronic devices due to overvoltages.
For wiring network-interconnected inductivities (e.g.. relay,
protection, fluorescent lamps, transformers, etc.).
Eliminates functional disturbances on electronic devices,
e.g. automatic circuit reclosure (clocking) of a motion
detector.
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz
6800-0-2485
6800-0-2483
1
1
6899
Busch-axcent®
84 davos/studio white 6800-84-104M
6800-0-2102
1/10
6800-0-2269
1
6800-0-2100
6800-0-2102
1
1/10
6800-0-2344
1
carat®
81 anthracite
6800-81-104M
82 savanna/
ivory white
6800-82-104M
84 davos/studio white 6800-84-104M
866 stainless steel
1)
2)
3)
*)
pure stainless steel 3)
6800-866-104M
installation: slide switch top.
Please order the respective flush mounted insert separately.
Surface painted.
Phase-out type
6899-0-0231
10
Twilight switch 1) 2)
With labelling field.
Labelling field 57.8 x 9.8 mm
Switch-on/switch-off delay: approx. 3-6 min non-adjustable.
Rated voltage: 230 V~
Rated frequency: 50 Hz
Rated current: 16 AX
Rated power: 3680 W/VA
Brightness limit value: 3 Lux - 500 Lux nominal
Protection class (Device): IP 44
Temperature range (Device): -35 °C to 55 °C
53 grey
54 alpine white
6500-0-0791
6500-0-0792
2240 W-53
2240 W-54
1/10
1/10
1) See lettering sheets 1799-13 and lettering software.
2) window non-illuminable.
Technical information
www.BUSCH-JAEGER-catalogue.com
Catalogue 2012 | Movement detector 337
Busch-Watchdog
Product
Article-No.
Order-No.
Pack/Qty
Product
Busch-Comfort switch 2-wire insert 1) 2) 3) 4)
2-wire connection.
For Busch-Comfort switch sensors 6815-xxx.
Operation in 1gang 2way installations via push switch-unit
for combination with flush-mounted units.
Operation also possible via conventional push buttons
(2020 US, 2021/6 UK).
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz
Suitable for: 230 V incandescent lamps, 230 V halogen
lamps and low-voltage halogen lamps with conventional
transformers or Busch Electronic Transformer.
Rated power: 40 - 300 W/VA
Temperature range (Device): 0 °C to 35 °C
British Standard EN 60669-2-1
6815 U
1)
2)
3)
4)
6800-0-2270
Busch-Comfort switch relay mechanism 1) 2) 3)
3 wire connection (neutral conductor required).
For Busch-Comfort switch sensors 6815-xxx.
Operation in 1gang 2way installations via push switch-unit
for combination with flush-mounted units.
Operation also possible via conventional push buttons
(2020 US, 2021/6 UK).
Rated voltage: 230 V~, +10 % / -10 %
Rated frequency: 50 Hz
Suitable for: 230 V incandescent lamps and low-voltage
halogen lamps with conventional transformers or electronic
transformer.
Rated power: 2300 W/VA
Suitable for: 230 V halogen lamps
Rated power: 1200 W
Suitable for: Fluorescent lamps
Rated current: 10 AX, cos 0.5
Rated power: 2300 VA
Temperature range (Device): 0 °C to 35 °C
British Standard EN 60669-2-1
6816 U
6800-0-2355
20 platinum 2)
21 bronze 2)
22G ivory
24 studio white matt
24G studio white
260 palladium 2)
266 titanium 2)
214 alpine white
Reflex SI
6815-214
1) Please order the respective flush mounted insert separately.
6800-0-2271
6800-0-2272
6815-20
6815-21
6815-22G
6815-24
6815-24G
6815-260
6815-266
1/10
1/10
1/10
1/10
1/10
1/10
1/10
future® linear
1/10
1/10
81 anthracite
6815-81
82 savanna/
ivory white
6815-82
83 aluminium silver 2) 6815-83
84 davos/studio white 6815-84
884 studio white
matt 2)
6815-884
6815-885
885 black matt 2)
6800-0-2284
1/10
6800-0-2285
6800-0-2342
6800-0-2286
1/10
1/10
1/10
6800-0-2499
6800-0-2501
1/10
1/10
solo®
82 savanna/
ivory white
6815-82
84 davos/studio white 6815-84
*
87 toscana/purple ) 6815-87
803 meteor/
grey metallic 2)
6815-803
815 sahara/yellow
6815-815
6800-0-2285
6800-0-2286
6800-0-2289
1/10
1/10
1/10
6800-0-2481
6800-0-2480
1/10
1/10
Busch-axcent®
84 davos/studio white 6815-84
6800-0-2286
1/10
6800-0-2284
1/10
6800-0-2285
6800-0-2286
1/10
1/10
6800-0-2345
10/10
carat
81 anthracite
6815-81
82 savanna/
ivory white
6815-82
84 davos/studio white 6815-84
®
866 stainless steel
pure stainless steel 2)
6815-866
1) Please order the respective flush mounted insert separately.
2) Surface painted.
*) Phase-out type
338 Movement detector | Catalogue 2012
6800-0-2273
6800-0-2274
6800-0-2275
6800-0-2276
6800-0-2277
6800-0-2282
6800-0-2283
Busch-Comfort switch control element 1)
With neon lamp.
For 2-wire insert 6815 U.
For relay insert 6816 U.
Adjustable operating mode: semiautomatic mode,
automatic switch-on, manual switch-off.
Adjustable operating mode: automatic timer, manual switchon, automatic (timer and motion-controlled) switch-off.
Adjustable operating mode: automatic mode, automatic
(motion-controlled) switch-on and switch-off.
Push switch function possible at all times.
Switch-off delay: 1 to 10 min., adjustable.
Surveillance density: 9 sectors with 28 switching segments.
Detection range: frontal: 5 m, lateral: 3 m
Detection angle: 170 °
Brightness limit value: 0.5 Lux - 300 Lux , Daytime operation
Mounting height: 0.8 m - 1.2 m
Protection class (Sensor): IP 20
Temperature range (Device): 0 °C to 35 °C
1/10
Busch-Comfort switch control element 1)
With neon lamp.
For 2-wire insert 6815 U.
For relay insert 6816 U.
Adjustable operating mode: semiautomatic mode,
automatic switch-on, manual switch-off.
Adjustable operating mode: automatic timer, manual switchon, automatic (timer and motion-controlled) switch-off.
Adjustable operating mode: automatic mode, automatic
(motion-controlled) switch-on and switch-off.
Push switch function possible at all times.
Switch-off delay: 1 to 10 min., adjustable.
Surveillance density: 9 sectors with 28 switching segments.
Detection range: frontal: 5 m, lateral: 3 m
Detection angle: 170 °
Brightness limit value: 0.5 Lux - 300 Lux , Daytime operation
Mounting height: 0.8 m - 1.2 m
Protection class (Sensor): IP 20
Temperature range (Device): 0 °C to 35 °C
6815-212
Pack/Qty
1) Please order the respective flush mounted insert separately.
2) Surface painted.
1) In case of electronic transformers, 5 % transformer losses.
2) In the case of conventional transformers, take ~20% transformer loss into account.
3) Output can be connected in parallel.
212 white
Order-No.
Busch-Comfort switch control element 1)
With neon lamp.
For 2-wire insert 6815 U.
For relay insert 6816 U.
Adjustable operating mode: semiautomatic mode,
automatic switch-on, manual switch-off.
Adjustable operating mode: automatic timer, manual switchon, automatic (timer and motion-controlled) switch-off.
Adjustable operating mode: automatic mode, automatic
(motion-controlled) switch-on and switch-off.
Push switch function possible at all times.
Switch-off delay: 1 to 10 min., adjustable.
Surveillance density: 9 sectors with 28 switching segments.
Detection range: frontal: 5 m, lateral: 3 m
Detection angle: 170 °
Brightness limit value: 0.5 Lux - 300 Lux , Daytime operation
Mounting height: 0.8 m - 1.2 m
Protection class (Sensor): IP 20
Temperature range (Device): 0 °C to 35 °C
1/10
In case of electronic transformers, 5 % transformer losses.
In the case of conventional transformers, take ~20% transformer loss into account.
Not suitable for activating the staircase time delay.
Output cannot be connected in parallel.
Article-No.
Catalogue 2012 | Movement detector 339
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising