Chevrolet PRIZM 1994 Owner's Manual

Chevrolet PRIZM 1994 Owner's Manual

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Manual
Chevrolet PRIZM 1994 Owner's Manual | Manualzz
1994
PRlZM
OWNER'S MANUAL
Geo Prizm
Introduction
Part 1
Part 2
Part 3
Part 4
Part 5
Part 6
Part 7
Part 8
1994 Owner’s Manual
Table of Contents
HOW
Use
to
This
Manual
Seats 81 Restraint Systems
=
Features & Controls .
..
ComfortControls & AudioSystems
.
Your DrivingandtheRoad
= = = . .
Problemsonthe Road
Service & AppearanceCare
MaintenanceSchedule
CustomerAssistanceInformation
rn
=
=
=
.
=
.
=
3
7
39
81
97
119
143
189
213
Including “Reporting Safety Defects” on page 216.
Part 9
Printed in U.S.A.
Index
ServiceStationInformation
223
rn.==.=.=.===.=m..rn=...
Part No. I0260664 A
=
LastPage
Second Edition
1
...
How to Use This Manual
lmporfant Notes about This
Manual
Please keepthis manual in your Geo,so it
will be there if youever need it when
you’re onthe road. If you sell the vehicle,
please leave this manual init so the new
owner can use it.
This manual includesthe latest information
at the timeit was printed. We reserve the
right to make changes inthe product after
that time withoutfurther notice. For
vehicles first sold in Canada,
substitute the
of Canada Limited”
name “General Motors
for Chevrolet Motor Division wherever it
appears in this manual.
...2
For Canadian OwnersWho Prefer a
French Language Manual
Aux propridtaires canadiens:Vous pouvez
vous procurer un exemplaire dece guide
zn franpis chez votre concessionaire ou
au
DGN Marketing Services Ltd., 1500
Bonhill Rd., Mississauga, Ontario L5T
1C7.
Published by:
Chevrolet Motor Division
General Motors Corporation
General Motors, GM and the GM
emblem, Chevrolet and the Chevrolet
emblem, andGeo and the Geo emblem are
registered trademarks of General Motors
Corporation.
@Copyright1993 General Motors
Corporation, Chevrolet/Geo Division. All
Rights Reserved.
How
to Use This
-
Parts 1-8: Each part of this manual
Part 4 Your Driving and the Road:
begins witha brief list of its contents,
so Here you’ll find helpful information and
Manual
you can often findat a glance if a part
tips about the road and how
to drive
Many people read their owner’s manual contains the informationyou want.
under different conditions.
from beginningto end when they first
How to Use This Manual: This part
Part 5 - Problems on the Road:This
receive their new vehicle. This will help tells you how touse your manual and
part tells you what todo if you have a
you learn about the features and controls includes safety and vehicle damage
problem while driving, suchas a flat tire
for your vehicle. In this manual, you’ll
warnings and symbols.
or engine overheating, etc.
find that pictures and words work
Part 6 - Service & Appearance Care:
Part 1 - Seats & Restraint Systems:
together to explain things quickly.
This part tellsyou how to use your seats Here the manual tells you how to keep
Index: A good place to look for what and safety belts properly. It also explains
your Geo running properly and looking
of the
you need is the Index in back
good.
the air bag system.
manual. It’s an alphabetical list of all
Part 2 - Features & Controls: This part Part 7 - Maintenance Schedule:This
that’s in the manual, and the page
explains how to start and operate your part tells when to perform vehicle
number where you’ll findit.
Geo.
maintenance and what fluids and
lubricants to use.
Part 3 - Comfort Controls& Audio
Systems: This part tells you how to
adjust the comfort controls and how to
operate your sound system.
3...
How to Use This Manual
Part 8 - Customer Assistance
Information: This part includes important
information about reporting safety defects
and gives you details about the “Roadside
Assistance” program.You will also find
customer satisfaction phone numbers
(including customersatisfaction numbers
for the hearing and speech impaired), as
well as the mediatiodarbitration
procedure. We’ve also included ordering
information for service publications in this
Part.
Safety Warnings and Symbols You will also find a circle with a slash
Service Station Information:This is a
through it in this book. This safety symbol
You will find a number of safety cautions means “Don’t,’’ “Don’tdo this,” or “Don’t
quick referenceof service information.
in this book. We use a box with a gray
You can findit on the last pageof this
let this happen.”
background and the word CAUTIONto
manual.
tell you about things that couldhurt you if
you were to ignore the warning.
In the gray caution area,we tell you what
the hazard is. Then we tell you what to do
to help avoid or reduce the hazard. Please
read these cautions. Ifyou don’t, you or
others could behurt.
..4
NOTICE:
Vehicle Symbols
These are someof the symbols you will
find on your vehicle. For example,these
symbols are used on an original battery:
These mean there is something that
could damage your vehicle.
These symbols are important for you and
your passengers whenever your vehicleis
driven:
Fasten Safety Belts
Caution Possible injury
4
These symbols haveto do with your lights:
@
Protect Eyes by Shielding
Master Lighting Switch
Caustic Battery Acid
Could Cause Burns
Turn Signal Direction
Vehicle Damage Warnings
Also, in this book you will find these
notices.
In the notice area, we tell you about
something that can damage your vehicle.
Many times, this damage would not be
covered by your warranty, andit could be
costly. But the notice will tellyou what to
do to help avoid the damage.
When you read other manuals, you might
see CAUTION and NOTICE warnings in
different colors or in different words.
You’ll also see warning labels on your
vehicle. They use yellowfor cautions, bluc
for notices and the words CAUTION or
NOTICE.
Hazard Warning Flashers
Avoid Sparksor Flames
8
Headlight High Beam
Sparks or Flame Could
Explode Battery
A
EO
--
Brightness Control
5..
How to Use This Manual
These symbols are on some of your
controls:
Vent
Here are some other symbols youmay see:
Windshield Wiper
and Washer
Heater
Hood Release
These symbols are used on warning and
indicator lights:
Lighter
Engine Coolant
Temperature
Horn
Windshield Washer
Windshield Defroster
Rear Window Defogger
BatteryChargingSystem
I-1
Fuel
Engine Oil Pressure
Ventilating Fan
Recirculate
Inside Air
Circulate
Outside Air
Bi-Level
...6
Malfunction Indicator
(Check Engine)
Door Ajar
Trunk Release
0
Part 1
Seats & Restraint Systems
i
H e r e you^ find information
about the seatsin your Geo and
how to use your safety belts
properly. You can also learn
about some things you should
not do with safety belts
.
Seats and Seat Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
11
Safety Belts: They’re for Everyone ....................................
1
12
Why Safety Belts Work .............................................
and the Answers . , 15
1Here Are Questions Many People Ask about Safety Belts.
15
!Safety Belt Reminder Light ..........................................
1How to Wear Safety Belts Properly ....................................
16
Children . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
IChild Restraints
................................................... 29
LargerChildren . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
37
Safety Belt Extender ...............................................
IChecking Your Restraint Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Replacing Safety Belts after a Crash ...................................
37
I
L
I
L
7
..
Seats and Restraint Systems
Lift the lever under the front seat to
unlock it. Slide theseat to where you
want it. Then release the lever andtry to
move the seat with your body, to make
sure the seat is locked into place.
Don’t put anything under the frontseats.
Items under the seats could keep the seats
from locking into place properly.
Seats and Seat Controls
This section tells you about the seats how to adjust them, andalso about
reclining front seatbacks, head restraints
and rear folding seatbacks.
Front Seat
...e
Reclining Front Seatbacks
To adjust the seatback, lift the leveron
the outer sideof the seat. Release the
lever to lock the seatback where you
want it. Push on the seat to make sure
it's locked in position. Pull up on the
lever, and the seat willgo to its original
upright position. But don't have the
seatback reclined if your vehicle is
moving.
Seats and Restraint Systems
Head Restraints
Pull up to raise the restraint.To lower it,
push
the release button and push down.
Slide the head restraint up
or down so that
the top of the restraint is closest
to the top Make sure the head restraint
is locked in
of your ears. This position reduces the place after you adjust it.
:hance of a neck injury in a crash.
. . .10
Rear Folding Seatback(omoN)
You can fold either sideof the seatback
jown in your Geo for more cargo space.
To fold either seatback down:
1. Make sure the front seat isn't reclined
If it is, the rear seatback won't fold
down all the way.
2. Push the button on the side of the
seatback whileyou pull down on the
seatback.
1
3. Fold the seatback down.
To raise the seatback:
1. Pull the seatback up and push it back
to lockit into place.
2. Be sure both sides of the seatback are
latched. Push and pullthe top of the
seatback tobe sure it is locked in
position.
Safety Belts: They’re
for Everyone
This partof the manual tells you how to
use safety belts properly.It also tells you
some things you should notdo with safety
belts. And it explains the Supplemental
Restraint System, or “air bag” system.
4
’his figure lights up as a reminder to
mckle up. (See “Safety Belt Reminder
2ight” in the Index.)
:n many states and Canadian provinces,
he law says to wear safety belts. Here’s
why: Thev work.
11
...
Seats and Restraint Systems
You never know if you’ll be in a crash.If
you do have a crash, you don’t know if it
will be a badone.
A few crashes are mild, and some crashes
can be so serious that even buckled up
a person wouldn’t survive. But most
crashes are in between. In manyof them,
people who buckle up can survive and
sometimes walk away. Without belts they
could have been badly hurt or killed.
After more than25 years of safety belts
in vehicles, the facts are clear.In most
crashes buckling up does matter... a lot!
. . .I2
Why Safety Belts Work
When you ride in or on anything, you
go
as fast as it goes.
For example, if the bike is going 10 mph
( 16 k m h ) , so is the child.
When the bike hits the block, it stops. But
the child keeps going!
Take the simplest vehicle. Suppose it’s
just a seat on wheels.
Put someone on it.
Get it up to speed. Then stop the vehicle.
The rider doesn’t stop.
13
...
Seats and Restraint Systems
The person keeps going untii stoppedby
something.
In a real vehicle, it couldbe the
windshield ...
m
m
m
14
or the instrument panel...
x the safety belts!
With safety belts, you slow down as the
vehicle does. You get more timeto stop.
You stop over more distance, and your
strongest bones take the forces. That’s
why safety belts make such good sense.
Here Are Questions
Many People Ask about
Safety Belts - and the
Answers
Q: Won’t I be trapped in the vehicle
after an accident if I’m wearing
a
safety belt?
belts. Even if you’re in a vehicle that
has air bags, you still have to buckle
up to get the most protection. That’s
true not only in frontal collisions, but
especially in side and other collisions.
Q: If I’m a good driver, and I never
drive far from home,why should I
wear safety belts?
A: You may be an excellent driver, but
A: You could be - whether you’re
if you’re in an accident - even one
wearing a safety belt or not. But you
that isn’t yourfault - you and your
can easily unbucklea safety belt,
passengers can be hurt. Beinga good
even if you’re upside down. And your
driver doesn’t protect you from things
chance of being conscious during and
beyond your control, such as bad
after an accident, so you can unbuckle
drivers.
and get out, is much greater if you are Most accidents occur within 25 miles
belted.
(40km) of home. And the greatest
number
of seriousinjuries and deaths
Q: Why don’t they just put in air bags
so people won’t have to wear safety occur at speedsof less than 40 mph
(65 kmh).
belts?
Safety belts are for everyone.
A: Air bags, or Supplemental Restraint
Systems, are in some vehicles today
and will be in more of them in the
future. But they are supplemental
systems only - so they work with
safety belts, not instead of them.
Every air bag system ever offered for
sale has required the use of safety
I Safety
Belt Reminder
Light
When the key is turned to “On” or
‘Start,” a buzzer will comeon for about
ight seconds to remind people to fasten
heir safety belts, unless the driver’s
iafety belt is already buckled. The safety
jelt light willalso come on and stay on
mtil the driver’s belt is buckled.
15..
Seats and RestraintSystems
How to Wear Safety
Belts Properly
Adults
This section is onlyfor people of adult
size.
Be aware that there are special things to
know about safety belts and children. And
there are different rulesfor smaller
children and babies. If a child will be
riding in your Geo,see the section after
this one, called “Children.” Follow those ;irst, you’ll want to know which restraint
ystems your vehicle has.
rules for everyone’s protection.
Ve’ll start with the driver position.
>river Position
’his section describes the driver’s
estraint system.
.. . I 6
Lap-Shoulder Belt
The driver hasa lap-shoulder belt. Here’s
how to wear it properly.
1. Close and lock the door.
2. Adjust the seat (to see how, see
“Seats” in the Index) so you can sit up
straight.
3. Pick up the latch plate and pull the
belt across you. Don’t let it get
twisted.
4. Push the latch plate into the buckle
until it clicks.
Pull up on the latch plate to make
sure it is secure. If the belt isn’t long
enough, see “Safety Belt Extender” at
the end of this section.
Make sure the release button on the
buckle is positioned so you would be
able to unbuckle the safety belt
quickly if you ever had to.
5. To make the lap part tight, pull down
on the buckle end of the belt as you
pull up on the shoulder belt.
The lap part of the belt should be worn
low and snug on the hips,just touching
the thighs. In a crash, this applies force
to the strong pelvic bones. Andyou’d be
less likely to slide under the lap belt. If
you slid under it, the belt would apply
force at your abdomen.This could cause
serious or even fatal injuries. The
shoulder belt should goover the shoulder
and across the chest. These parts of the
body are best able to take belt restraining
forces.
The safety belt locksif there’s a sudden
stop or crash, or if you pull the belt very
quickly out of the retractor.
17..
To move it up or down, pull the release
S'houlder Belt Height Adjuster
knob. When you release the knob,try
kiou can move the shoulder belt adjuster to move it down a little to make sure
ct 3 the height thatis right for you.
it has lockedinto position.
Adjust the height so that the shoulder
portion of the belt is properly positioned
on your shoulder, away from your face
,nd neck.
To help you finda height thatis right for
you, follow these guidelines:
For a tall Derson: Use the upper or
apper-middle position.
G:
Use a
position somewhere in the middle.
For a short Derson: Use the loweror
lower-middle position.
I
.. . I 8
I
I
1
Q: What’s wrong with this?
a: What’s wrong with this?
Q: What’s wrong with this?
A: The shoulder belt is too loose. It won’
give nearly as much protection this
way.
L: The belt is buckled in the wrong
place.
A: The shoulder beltis worn under the
arm. It should be worn over the
shoulder at all times.
19
...
Seats and Restraint Systems
Supplemental Restraint System
(Air Bags)
This section explains the Supplemental
Restraint System (SRS), or “air bag”
system. Your Geo has an air bagfor the
driver and for the right-front passenger.
Here are the most important things to
know:
Q: What’s wrong with this?
A: The belt is twisted acrossthe body.
...20
To unlatch the belt,just push the button
on the buckle. The belt shouldgo back
out of the way.
Before you close the door, be sure the belt
is out of the way. If you slam the door on
it, you can damage both the belt and your
vehicle.
Air Bag Readiness Light
There is an air bag readiness light on the
instrument panel, which shows “AIR
BAG’ on it. The system checksfor
electrical malfunctions, and the light tells
you if there is a problem.
You will see this light comeon when you
turn your ignition to “ACC,”“ON’ or
“START.” Then the light should goout,
which means the system is ready.
Remember, if the air bag readiness light
doesn’t come on when you start your
vehicle, or stays on, or comes on when
you are driving, your air bag system may
not work properly. Have your vehicle
serviced right away.
21 ...
Seats and Restraint Systems
car which will move and deform on
impact. The air bag is also not designed
to inflate in rollovers, side impacts,or
rear impacts where the inflation would
provide no occupant protection benefit.
It is possible thatin a crash, only one of
."
the two air bagsin your Geo will deploy.
This is rare, but can happenin a crash just
severe enough to make an air bag inflate.
A
In any particular crash, the determination
of whether the air bag should have
inflated cannot be based solely on the
How the Air Bag System Works
The right-front passenger's air bag is
level of damage on the vehicle(s).
located in the instrument panel on the
Inflation is determinedby the angleof the
Where is the air bag?
passenger's side.
impact and the vehicle's deceleration, of
The driver's air bag is in the middle of the
When is an air bag expected to inflate? which vehicle damage is only one
steering wheel.
indication. Repair cost is nota good
The air bag is designed to inflatein
indicator of whether an air bag should
moderate to severe frontalor near-frontal
have deployed.
crashes. The air bag will only inflate if
the velocity of the impact is above the
What makes an air bag inflate?
designed threshold level. When impacting
In a frontal or near-frontal impactof
straight into a wall that does not move
sufficient severity, the air bag sensing
or deform, the threshold level for most
system detects that the vehicle is
GM vehicles is between 9 and 15 mph
(14 and 23 km/h). However, this velocity suddenly stoppingas a result of a crash.
threshold depends on the vehicle design The sensing system triggersa chemical
and may be several miles-per-hour faster reaction of the sodium azide sealedin the
inflator. The reaction produces nitrogen
or slower. In addition, this threshold
gas,
which inflates a cloth bag. The
velocity will be considerably higherif the
vehicle strikes an object such asa parked inflator, cloth bag, and related hardware
,/
:
...22
are all part of the air bag inflator modules
packed inside the steering wheel and in
the instrument panel infront of the
passenger.
that the air bag inflated. Some
components &the air bag module in the
steering wheel hub for the driver’s air
bag or the instrument panelfor the
passenger’s bag may be hot for a short
How does an air bag restrain?
time, but the portionof the bag that comes
into contact with you will not be hot to
In moderate to severe frontal or
the touch. There will be small amountsof
near-frontal collisions, even belted
occupants can contact the steering wheel smoke anddust coming from vents in the
deflated air bags. The air bag will
or the instrument panel. The air bag
impede the driver’s vision or ability to
supplements the protection provided by
steer the vehicle, nor will it hinder the
safety belts. Air bagsdistribute the
occupants
from exiting the vehicle.
force of the impact more evenly over
the occupant’s upper body,stopping the
In many crashes severe enough to inflate
occupant more gradually. Butair bags
an air bag, windshields are brokenby
would not provide protection in many
vehicle deformation. Additional
types of collisions, including rollovers
windshield breakage may occur in
and rear and side impacts, primarily
vehicles with passenger air bags because
because an occupant’s motion is not
the windshield acts as a reaction surface
toward the air bag.Air bags should
for the inflating air bag.
never be regarded as anything more than 0
The air bags are designed to inflate
a supplement to safety belt protectionin
only once. After theyinflate, you’ll
moderate to severe frontal and
need some new parts for your air bag
near-frontal collisions.
system. If you don’t get them, theair
bag
system won’t be thereto help
What will you see after anair bag
protect you in another crash.A new
inflation?
system will include air bag modules
After the air bag has inflated, it will then
and possibly other parts. Theservice
quickly deflate. This occurs so quickly
manual has information about the
that some people may not evenrealize
need to replace otherparts.
Your vehicle is equipped with a
,diagnostic module, which records
information about theair bag system.
The module records informationabou
the readiness of the system, when the
sensors are activated, and whether the
driver’s safety belt was in use.
Let only qualified technicians work 01
your air bag system. Improper service
can mean that your air bag system
won’t work properly.See your dealer
for service.
NOTICE:
If you damage the cover for the
driver’s or the right-front passenger’s
air bag, they may not work properly.
You may have to replace the air bag
on the steering wheel or both the air
bag and the instrument panelfor the
passenger’s air bag. Do not open or
break the air bag cavers.
211
Seats and Restraint Systems
Is the smoke from an air bag inflation
harmful?
The particles emitted duringair bag
inflation are not harmful to most people.
Some people with respiratory ailments
may experience difficulty breathingif
they stay in the vehiclewith the windows
closed after airbag inflation. So, if your
air bag inflates, you and any passengers
should exit the vehicle if and when it is
safe todo so. If you or your passengers
can’t get out of the vehicle, tryto get
fresh air by opening a window, turning on
the fan, or openinga door.
Servicing your Air Bag-Equipped Geo
Air bags affect how your Geo should be
serviced. There are partsof the air bag
system in several places around your
vehicle. You don’t want the system to
inflate while someone is workingon your
vehicle. Your Geo dealer and the 1994
Prizm Service Manual have information
about servicing your vehicle and the
air
bag system. The air bag system does not
need regular maintenance.
...24
Safety Belt Use during
Pregnancy
Safety belts work for everyone, including
pregnant women. Like all occupants, they
are more likely to be seriously injured if
they don’t wear safety belts.
A pregnant woman should wear a
lap-shoulder belt, and the lap portion
should be worn as low as possible
throughout the pregnancy.
The best way to protect the fetus is to
protect the mother. Whena safety belt
is worn properly, it’s more likely that
the fetus won’t be hurt in a crash. For
pregnant women, as for anyone, the key
to making safety belts effectiveis wearing
them properly.
I
sassenger Positions
Rear Seat Passengers
tight Front Passenger Position
It’s very important for rear seat
passengers to buckle up! Accident
’he right front passenger’s safety belt
iorks the same way as the driver’s safety statistics show that unbelted peoplein the
lelt. See “Driver Position,” earlier in this rear seat are hurt more often in crashes
than those who are wearing safety belts.
lart.
Yhen the shoulder belt is pulled out all Rear passengers who aren’t safety belted
can be thrown outof the vehicle in a
he way, it will lock. If it does, let it go
crash. And they can strike others in the
lack all the way and start again.
vehicle who are wearing safety belts.
1. Pick up the latch plate and pull the
belt across you. Don’t let get
it
twisted.
2. Push the latch plate into the buckle
until it clicks.
Pull up on the latch plate to make sure it
is secure.
When the shoulder belt is pulled out all
the way, it will lock. If it does, let it go
back all the way and start again.
Rear Seat Outside Passenger Positions If the belt is not long enough, see “Safety
Belt Extender” at the endof this section.
Lap-Shoulder Belt
Make sure the release buttonon the
The positions nextto the windows have
buckle is positioned so you would be able
lap-shoulder belts. Here’show to wear
to unbuckle the safety belt quicklyif you
one properly.
ever had to.
25..
Seats and Restraint Systems
3. To make the lap part tight, pull down
on the buckle endof the belt as you
pull up on theshoulder part.
1:he lap part of the belt should be worn
1ow and snug on the hips,just touching
t he thighs. In a crash, this applies force to
t he strong pelvic bones. And you’d be
11ess likely to slide under the lap belt. If
4~ O Uslid under it, the belt would apply
f orce at your abdomen. This could cause
S,erious or even fatal injuries.The
S#boulder belt should go over the shoulder
amd across the chest.These parts of the
tYody are best able to take belt restraining
f orces.
1The safety belt locksif there’s a sudden
s;top or crash, or if you pull it very quickly
<)ut of the retractor.
...26
c
e To unlatch the belt,just push the
button on the buckle.
F
:enter Passenger Position
lap Belt
F your vehicle has a rear bench seat,
omeone can sit in the center position.
When you sit in a center seating position,
you have a lap safety belt, which has no
retractor. To make the belt longer, tilt the
latch plate and pull it along the belt.
27
...
Seats and Restraint Systems
Smaller Children and Babies
i
To make the belt shorter, pull its free end
as shown until the belt is snug.
Buckle, position and release it the same
way as the lap part of a lap-shoulder belt.
If the belt isn’t long enough, see “Safety
Belt Extender” at the end of this section.
Make sure the release button on the
buckle is positioned so you would be able
to unbuckle the safety belt quicklyif you
ever had to.
...28
Children
Everyone in a vehicle needs protection!
That includes infantsand all children
smaller than adult size. In fact, the law in
every state in the United States and in
every Canadian province says children up
to some age must be restrained while in a
vehicle.
Child Restraints
Be sure to follow the instructions for the
restraint. You may find these instructions
or
on the restraint itself or in a booklet,
both. These restraints use the belt system
in your vehicle, but the child also has to
be secured within the restraint to help
reduce the chance of personal injury. The
instructions that come with the infant
or
child restraint will showyou how to do
;hat.
Where to Put the Restraint
Accident statistics show that children are
iafer if they are restrained in the rear
rather than the front seat.We at General
Motors therefore recommend that you
?ut your child restraint in the rear seat.
YEVER put a rear-facing child restraint
in the front passenger seat. Here’s why:
29 ...
Seats and Restraint Systems
-
i
U
~~
I’op Strap
Securing a Child Restraintin a Rear
Outside Position
[f your child restraint has a top strap,
it
should be anchored.If you need to have You’ll be using the lap-shoulder belt. See
an anchor installed, you can ask your Geo the earlier section about the top strap if
dealer to putit in for you. If you want to
the child restraint has one.
install an anchor yourself, your dealer can1. Put the restraint on the seat. Follow
;ell you how todo it.
the instructions for the child restraint.
For cars first sold in Canada, child
2. Secure the child in the child restraint
restraints
with
a
top
strap
must
be
as the instructions say.
Wherever you install it, be sure
to secure
anchored
according
to
Canadian
law.
the child restraint properly.
3. Pick up the latch plate, andrun the lap
Your
dealer
can
obtain
the
hardware
kit
and shoulder portions of the vehicle’s
Keep in mind that an unsecured child
and
install
it
for
you,
or
you
may
install
it
safety belt through or around the
restraint can move around in a collision
restraint. The child restraint
or sudden stop and injure people in the yourself using the instructions provided in
the kit.
instructions will showyou how.
vehicle. Be sure to properly secure any
Use the tether hardware kit available from
- even
child restraint in your vehicle
of the
If the shoulder belt goes in front
the dealer. The hardware and installation
when no child is in it.
child’s face or neck, put it behind the
instructions were specifically designed fol
child restraint.
this vehicle.
...30
4. Buckle the belt. Make sure the release
button is positioned so you would be
able to unbuckle the safety belt
quickly ifyou ever had to.
5. Pull the rest of the shoulder beltall the 6.. TOtighten the belt, feed the shoulder
way out of the retractor to set the lock.
belt into the retractor while you push
down on the child restraint.
3 1
...
Seats and Restraint Systems
7. Push and pull the child restraint in
.,.
directions to be sure
it is
different
secure’.
To remove the childrestraint, just
unbuckle the vehicle’s safety belt and
let
it go back all the way. The safety belt will
move freely againand be ready to work
for an adultor larger child passenger.
. . .32
1.
Securing a Child Restraint in
the
Zenter Rear Seat Position
When you secure a child restraint ina
2.
:enter seating position, you’ll be using the
,apbelt.
3.
See the earlier section about the top strap
d the child restraint has one.
Make the belt as longas possible by
tilting the latch plate and pullingit
along the belt.
Put the restraint on the seat. Follow
the instructions forthe child restraint.
Secure the child in the child restraint
as the instructionssay.
4. Run the vehicle’s safety belt through
or around the restraint. The child
restraint instructions will show you
how.
5. Buckle the belt. Make sure the release
button is positioned so you would be
able to unbuckle the safety belt
quickly if you ever had to.
6. To tighten the belt, pull its free end
while you push down on the child
restraint.
7. Push and pull the child restraint in
different directions to be sureit is
secure. If the child restraint isn’t
secure, turn the latch plate over and
buckle it again. Then see if it is
secure. If it isn’t, secure the restraint
in a different placein the vehicle and
contact the child restraint maker for
their advice abouthow to attach the
child restraint properly.
To remove the child restraint,just
unbuckle the vehicle’s safety belt. It will
be ready to work for an adult or larger
child passenger.
U
Securing a Child Restraint in the Righi
Front Seat
Your vehicle has a right-front passenger?
air bag. NEVER put a rear-facing child
restraint in this seat. Here’s why:
33 ...
Seats and Restraint Systems
cou’ll be using the lap-shoulder belt.See
he earlier section about thetop strap if
he child restrainthas one.
I. Because your vehicle hasa right-front
passenger’s air bag, always move the
seat as far back asit will go before
securing a front-facing child restraint.
2. Put the restrainton the seat. Follow
the instructions for the child restraint.
3. Secure the child in the child restraint
as the instructions say.
4. Pick up the latch plate, andrun the lap 5. Buckle the belt. Make sure the release
button is positioned so you would be
and shoulder portionsof the vehicle’s
able to unbuckle the safety belt
safety belt throughor around the
quickly
if you ever had to.
restraint. The childrestraint
instructions will showyou how.
If the shoulderbelt goes in front of the
child‘s face or neck, put it behind the
child restraint.
...34
6. Pull the rest of the shoulder beltall the
way out of the retractorto set the lock.
A
I
7. To tighten the belt, feed the shoulder 8. Push and pull the chilu 1-esrraint in
belt back into the retractor while you
different directions to be sure
it is
push down on the child restraint.
Children who have outgrown child
secure.
restraints should wear the vehicle’s safety
To remove the child restraint,just
belts.
unbuckle the vehicle’s safety belt and let
If you have the choice, a child should sit
it go back all theway.
next
to a windowso the child can weara
The safety belt will move freely again and
lap-shoulder belt and get the additional
or larger
be ready to work for an adult
restraint
a shoulder belt can provide.
child passenger.
Accident statistics show that children are
safer if they are restrained in the rear seat.
But they need to use the safety belts
properly.
0 Children who aren’t buckled up can
be thrown out ina crash.
Larger Children
Seats and Restraint Systems
Q. What if a child is wearing a
lapshoulder belt, but the childis so
small that the shoulder beltis very
close to the child's face or neck?
I
0
Children who aren't buckled up can
strike other peoplewho are.
...36
A: Move the child toward the centerof
the vehicle, but be sure that the
shoulder belt stillis on the child's
shoulder, so that in a crash the child's
upper body would have the restraint
that belts provide.
If the child isso small that the
shoulder belt is still very close to the
child's face or neck, you might want
to place the childin the center seat
position, the one that has only a lap
belt .
Safety . Belt,,Extender
;,
....
.
~.
’
.,
,::.*
,
.
<
,
If the vehicle’s safety belt will fasten
around you, you should use it.
But if a safety belt isn’t long enough to
fasten, your dealer will orderyou an
extender. It’sfree. When you go in to
order it, take the heaviestcoat you will
wear, so the extender will be long enough
for you. The extender will bejust foryou,
and just forthe seat in your vehicle that
you choose. Don’t let someone else use it,
and use it onlyfor the seat it ismade to
fit. To wear it, just attach it tothe regular
safety belt.
Wherever the child sits, the lap portion of
the belt should be wornlow and snug on
the hips, just touching the child’s thighs.
This applies belt force to the child’s
pelvic bones in a crash.
Replacing Safety Belts
after aCrash
If you’ve hada crash, do you need new
belts?
After a very minor collision, nothing may
be necessary. But ifthe belts were
stretched, as they would be
if worn during
a more severe crash, then you neednew
belts.
[f you ever seea label on the driver’sor
the right-front passenger’s safety belt that
says. to replacethe belt, be sureto do so.
rhen the new belt will bethere to help
protect you in an accident. You would
see this label on the belt near the door
Checking Your
3pening.
Restraint Systems
[f belts are cutor damaged, replace them.
Zollision damage’ also may mean you
Now and then, make sure all your belts,
will need to have safety beltor seat parts
buckles, latch plates, retractors,
repaired or replaced. New parts and
anchorages and reminder systems are
-epairs may be necessary even if the belt
working properly. Look for any loose
parts or damage. If you see anything that gasn’t being used at the timeof the
might keep a restraint systemfrom doing :ollision.
its job, have it repaired.
Seats and Restraint Systems
Q: What's wrong with this?
A: The belt is torn.
Torn or frayed beltsmay not protect you
in a crash. They canrip apart under
impact forces. If a belt is torn or frayed,
get a new one right away.
. . .38
Part 2
Features & Controls
H e r e you can learn about the
many standard and optional
Features on yourGeo. and
information on starting. shifting
and braking. Also explained are
the instrument panel and the
warning systems that tell youif
everything is working properlyand what todo if you have a
problem.
Keys .............
...........................................
40
Door Locks .......................................................
41
44
Theft ...........................................................
New Vehicle"Break-In" ...........................................44
Ignition Switch ...................................................
44
Starting Your Engine ...............................................
45
AutomaticTransaxle ...............................................
47
ManualTransaxle .................................................
49
51
Parking .........................................................
EngineExhaust ..................................................
54
Windows ........................................................55
Horn ........................................................... 56
TiltWheel ......................................................
56
The Turn SignaVLightsControUHeadlightBeamLever ... ............... 56
InteriorLights ...................................................
58
Windshield WiperNasher Lever .....................................
59
CruiseControl ...................................................
61
Mirrors ......................................................... 63
SunRoof ........................................................64
StorageandCompartments .........................................
66
67
Sunvisors ......................................................
Passenger Assist Grips .............................................
68
68
AshtraysandLighter ..............................................
Instrument Panel and Clusters .......................................
72.
39 ...
Features and Controls
NOTICE:
Your Geo has a number of features
that can help prevent theft. But you
can have a lot of trouble getting into
your vehicle if you ever lock your
keys inside. You may even have to
damage your vehicle to getin. So be
sure you have an extra key.
Keys
...40
)ne key is used for the ignition, the
loors, and all other locks.
Nhen a new Geo is delivered,the dealer
emoves the metal plate from the key rinl
md gives it to the first owner.
The metal plate has a code on it that tells
'our dealer or a qualified locksmith how
o make extra keys. Keepthe code in a
afe place. If you lose your keys, you'll
,e able to havenew ones made easily
rsing this code.
1
Door Locks
I
1
(here are several ways to lock and unlocjk To lock the door from the inside, push
down the button on the door.
'our vehicle:
To unlock the door, pull up on the button.
kom the outside, use yowlkey.To lock
he door, turn the top of the key toward
he front of the car. If you have power
loor locks, all the doors will lock.
'urn the top of the key toward the rearof
le car to unlock the door. If your vehicle
as power doorlocks, turn the key once
I unlock the driver's door only. Turn the
ey back to center, then toward therear
gain to unlock all the doors. Usingthe
ey in the passenger's door will unlock
a11
L
e doors.
41
...
Features and Controls
Power Door Locks (Option)
Push the power door lock switch on the
driver’s door to lockor unlock all the
doors at once.
Rear Door Security Lock
Your Geo is equipped with rear door
security locks that help prevent
passengers from opening the rear doors01
your car from the inside.
Leaving Your Vehicle
To use one of these locks:
If you are leaving the vehicle, take your 1. Turn the knob so the bar points up anc
key, open your door and setthe locks
down.
from inside. Then get out and
close the
2. Close the door.
door.
3. Do the same thing to the other rear
door lock.
The rear doorsof your vehicle cannotbe
opened from inside when this feature is in
use.
...42
:f you want to open a rear door whenthe
iecurity lock is on:
1. Unlock the door from the inside.
2. Then open the door from the outside.
If you don’t cancel the security lock
feature, adults and older children who rid
in the rear won’t be able to open the rear
door from the inside. You should let
adults and older children know how thest
security locks work, andhow to cancel
the locks.
To cancel the rear door lock:
1. Unlock the door from the inside and
open the door from the outside.
2. Turn the knob so the bar points towar
the sides.
3. Do the same for the other rear door.
The rear door locks will now work
normally.
rrunk Lock Release
b open the trunk lid, use your key and
urn it clockwise.
To close the lid, lower and press down on
t. After closing the lid,try pulling it up to
nake sure it is closed.
Remote Trunk Lock Release
Pull the lever on the floor near the
driver’s door to open the trunk lid from
inside your vehicle.
43
.
I
Features and Controls
Theft
Vehicle theft is big business, especially in
some cities. Although your Geo has a
number of theft deterrentfeatures, we
know that nothing we put on itcan make
it impossibleto steal. However, there are
ways you can help.
11
Key in the Ignition
If you walk awayfrom your vehicle with
the keys inside,it’s an easy targetfor joy
riders or professionalthieves - so don’t
do it.
When you park your Geo and open
the
driver’s door, you’ll heara tone
reminding youto remove your key from
the ignition and takeit with you. Always
do this. Your steering wheelwill be
locked, andso will your ignition.If you
have an automatic transaxle, taking your
key out also locks your transaxle.And
remember to lock the doors.
Parking at Night
Park in a lighted spot, closeall windows
and lock your vehicle. Remember
to keep
your valuables outof sight. Put them ina
storage area,or take them with you.
...44
New Vehicle
“Brreak-ln”
NOTICE:
Your modern Geo doesn’t need an
elaborate “break-in.” But it will perform better inthe long runif you follow these guidelines:
0 Don’t drive at any one speed
- fast or slow -for the first
500 miles (804 km). Don’t
make full-throttle starts.
0 Avoid making hard stops for
the first 200 miles (322 km) or
so. During’thistime your new
brake linings aren’tyet broken
in. Hard stops with new linings
can mean premature wear and
earlier replacement. Followthis
“breaking-in” guideline every
time you get new brake linings.
B
W
Ignition Switch
Nith the key in the ignition switch, you
:an turn the switch tofour positions:
LOCK (A): The only position in which
IOU can remove thekey. This locks your
jteering wheel, ignition and automatic
ransaxle. Push in the ignition switch as
you turn the topof it toward you.
[f you have an automatic transaxle, the
ignition switch cari’tbe tyrned to
”LOCK” unless the shift leveris in the
“P” (Park) position.
K C (B):Position in which you can
3perate some of your electrical power
accessories (such as theradio, but not thc
ventilation fan). It unlocks the steering
wheel and ignition.
ON (C): Position to which the switch
returns after you start your engine and
release the switch. The switch stays in
the “ON’ position when the engine is
running. But even when the engine is not
running, you can use “ON” to operate
your electrical power accessories
(including the ventilationfan) and to
display some warning and indicator
lights.
START (D): Starts the engine. When the
engine starts, release the key. The ignition
switch will return to “ON” for normal
driving.
When the engine is not running, “ACC”
and “ON” allow you to operate some of
your electrical accessories.
A warning tone will sound ifyou open
the driver’s door when the ignition is in
“ACC” or “LOCK’ and the key is in the
ignition.
1A CAUTION:
On manual transaxle vehicles,
turning the keyto “LOCK” will lock
the steering column and resultin a
loss of ability to steer the vehicle.
This could cause a collision. If you
need to turn the engineoff while the
vehicle is moving, turn the key only
to “ACC.” Don’t push the key in
while the vehicleis moving.
NOTICE:
If your key seems stuck in “LOCK”
and you can’t turn it, be sure it is all
the way in. If it is; then turn the
steering wheel left and right while
you turn the key hard. But turn the
key only with your hand. Using a
tool to force it could break the key
or the ignition switch.If none of
this works, then your vehicle needs
service.
Starting Your Engine
Automatic transaxle: Move your shift
lever to “P” (Park) or “N” (Neutral). Your
engine won’t start in any other position that’s a safety feature. To restart when
you’re already moving, use “ N ’ (Neutral)
only.
NOTICE:
Don’t try to shift to“P” (Park) if your
Geo is moving. If you do, you could
damage the transaxle. Shift to “P’
(Park) only when your vehicle is
stopped.
~~
~~~
Manual transaxle: The gear selector
should be in neutral. Hold the clutch
pedal to the floor and start the engine.
Your vehicle won’t start ifthe clutch
pedal is not all the way down - that’s
a safety feature.
To start your engine:
1. Without pushing the accelerator pedal,
turn your ignition key to “START.”
When the engine starts, let go of the
key. The idle speed will go down as
your engine gets warm.
45
...
Features and Controls
NOTICE:
Holding yourkey in “START” for
longer than 15 seconds ata time will
cause your batteryto be drained
much sooner. And the excessive heat
can damage your starter motor.
2. If it doesn’t start in three seconds, wait
about 15 seconds and try again to start
the engineby turning the ignitionkey
to “START.” Wait about 15 seconds
between each try to help avoid
draining your battery.
When your engine hasrun about
10 seconds to warm up, your vehicle
is ready to be driven. Don’t “race”
your enginewhen it’s cold.
If the weather is below freezing
(32°F or OOC), let the engine runfor
a few minutes to warm up.
3. If your engine still won’t start (or
starts but thenstops), it could be
flooded with too much gasoline. Try
pushing your accelerator pedalall the
way to the floor and holding it there as
you hold the key in “Start”for about
three seconds. If the vehicle starts
briefly but then stops again,do the
... 46
same thing, but this time keep the
pedal down for five or six seconds.
the
This clears the extra gasoline from
engine.
If your enginestalls, restart it as
explained earlier.If it stalls often,
have the engine checkedby your
dealer as soon as possible.
NOTICE:
Your engine is designed to work with
the electronics in your vehicle. If you
add electrical parts or accessories,
you could change the way the fuel
injection system operates. Before
adding electrical equipment, check
with your dealer. If you don’t, your
engine might not perform properly.
If you ever have to have your vehicle
towed, see the partof this manual
that tellshow to do it without
damaging your vehicle. See “Towing
Your Vehicle” in the Index.
Driving fhroughDeep Standing
Water
NOTICE:
If you drive too quickly through deep
puddles or standing water, water can
come in through your engine’sair
intake and badly damage your
engine. If you can’t avoid deep
puddles or standing water, drive
through them very slowly.
lever - push the shift lever all theway
into “P” (Park) and releasethe shift lever
button as you maintain brake application.
Then press the shift lever button and
move the shift lever into the gear you
wish. See “Shifting out of ‘P’ (Park)” in
this part.
R (Reverse)
Use this gear to back up.
NOTICE:
Automatic Transaxle
Shifting to “R’ (Reverse) while your
vehicle is moving forward could
damage your transaxle. Shiftto “R’
only after your vehicleis stopped.
There are several different positionsfor
your shift lever.
P (Park)
This locks your front wheels. It’s the best
position to use when you start your
engine because your vehicle can’t move
easily.
To rock your vehicle back and forth
to
get out of snow, ice or sand without
damaging your transaxle, see “Stuck: In
Sand, Mud,Ice or Snow” in the Index.
Ensure the shift lever is fully in“P”
(Park) range before starting the eng,ine.
Your Geo has a brake-transaxle shift
interlock. You have to fullyapply your
regular brakes before you can shift from
T“ (Park) when the ignition key is in the
“ON’ position. If you cannot shift out of
“P” (Park), ease pressure on the shift
47
...
Features and Controls
N(Neutral)
In this position, your engine doesn’t
connect with the wheels.To restart when
you’re already moving, use “N” (Neutral:
only. Also, use “N” when your vehicle is
being towed.
I NOTICE:
Damage to your transaxle causedby
shifting outof “P’ (Park) or“N”
(Neutral) with the engine racing isn’t
covered by your warranty.
... 48
0 2 (SecondGear)
D(Drive)
This position is for normal driving. If you This position gives you more power but
need more power for passing, and you’re: lower fuel economy. You can use “2” on
hills. It can help control your speed as
- Going less than about 27 mph
you go down steep mountain roads, but
(43 km/h), push your accelerator
then you would also want to use your
pedal about halfway down.
brakes off and on.
- Going about 29 mph (47 k d h ) or
more, push your accelerator pedal all
NOTICE:
the way down.
Don’t drive in “2” (Second Gear)
You’ll shift down to the next gear and
for more than 5 miles (8 km), or at
have more power.
speeds over 55 mph (88 km/h), or
you can damage your transaxle. Use
“ D ’ as much as possible.
Don’t shift into “2” unless you are
going slower than 65 mph (105 km/h),
or you can damage your engine.
L (Low Gear)
This position gives you even more power
(but lower fuel economy) than“2.” You
can use it on very steep hills, or in deep
snow or mud. If the selector leveris put in
“L,” the transaxle won’t shift into low
gear until the vehicleis going slowly
enlough.
0
NOTICE:
1I I
If your front wheels can’t rotate,
don’t try to drive. This might happen
if you were stuck invery deep sand
or mud or were up againsta solid
object. You could damage your transaxle.
Also, if you stop when going uphill,
don’t hold your vehicle there with
only the accelerator pedal. This could
overheat and damage the transaxle.
Use your brakesto hold your vehicle
in position on a hill.
L
Manual Transaxle
Overdrive (Option)
If your automatic transaxle has Overdrive,
Five-Speed
you can useit for better fuel economy.
After starting your engine, always push in This is your shift pattern. Here’s
how to
the “OVERDRIVE’ switch. Then select
operate your transaxle:
the gearyou want and press the
1 (First Gear) -Press the clutch
accelerator pedal.
pedal and shift into “1.” Then, slowly
let up on the clutch pedal asyou press
Gradual starts giveyou the best fuel
economy. Fast starts use the mostfuel.
the accelerator pedal.
A light onthe instrument panel will come
You qan shift into “1” when you’re
on wheneveryou turn off Overdrive. See
going less than20 mph (32 km/h). If
you’ve come to a complete stop and
“Overdrive Off Light” in the Index.
it’s hard to shift into “1,” put the shift
lever in “Neutral” and let up on the
clutch. Press the clutch pedal back
down. Then shift into “1.”
49 ...
Features and Controls
0
0
0
0
0
2 (Second Gear)- Press the clutch
Shift Speeds (MANUAL TRANsMIssIoNj
pedal as you let up on the accelerator
pedal and shift into “2.” Then, slowly This chart shows whento shift to the next gear for best fuel economy.
let up on the clutch pedal as you press
MANUAL TRANSMISSION RECOMMENDEDSHIFT SPEEDS, IN MPH(kmk)
the accelerator pedal.
Acceleration Shift Speed
3,4 and 5 (Third, Fourth and Fifth
I
Gears) - Shift into “3,” “4” and “5”
1 to2
3 3 2 to
to 4
to 4 5
2 or
to 3
or4to3
or5to4
the same way you do for “2.” Slowly
or 2 to 1
let up on the clutch pedal as you press
the accelerator pedal.
To Stop - Let up on the accelerator
pedal and press the brake pedal. Just If your speed drops below20 mph (32 km/h), or if the engineis not running smoothly,
you should downshift to thenext lower gear. You may have to downshift two or more
before the vehiclestops, press the
or for good performance.
clutch pedal and the brake pedal, and gears to keep the engine running smoothly
shift to “Neutral.”
Neutral - Use this position when
you start or idle your engine.
R (Reverse) -To back up, press
down the clutch pedal and shift .into
“R.”Let up on the clutch pedal slowly
while pressing the accelerator pedal.
I
I
NOTICE:
Shift to “R” (Reverse) only after your
vehicle is stopped. Shiftingto “R”
(Reverse) while your vehicleis moving could damage your transaxle.
Also, use “R’ (Reverse) along with the
parking brake for parking your vehicle.
...50
I
I
I
I
I
I
NOTICE:
If you skip more than one gear when
you downshift, or if you race the
engine when you downshift, youcan
damage the clutch or transaxle.
Parking
To release theparking brake: Hold the
brake pedal down.Pull the parkingbrake
lever upuntil you can pressthe release
Parking Brake
button. Holdthe release buttonin as you
To set the parking brake: Hold the brake move the lever all the way down.
pedal down and pull up on the parking
brake lever. If the ignition is on, the brake
NOTICE:
system warning light will come on.
Driving with the parking brakeon
can cause your rear brakesto overheat. You may have to replace them,
and you could also damage other
parts of your vehicle.
If you are towing a trailer, see “Towing a
Trailer” in the Index.
51
...
Features and Controls
Leaving Your Vehiclewith the
Engine Running
Shifting into“P” (Park)
(AUTOMATIC TRANSAXLE)
(AUTOMATIC TRANSAXLE)
1. Hold the brake pedal down with your
right foot and set the parking brake.
2. Move the shift lever into “P” (Park)
position like this:
0
Hold in the button on the lever,
and push the lever all the way
toward the frontof your vehicle.
3. Move the key to “LOCK.”
4. Remove the key and take it with you.
If you can walk away from your
vehicle with the key in your hand,
your vehicle is in “ P ’ (Park).
...52
Shifting outof P (Park)
(AUTOMATIC TRANSAXLE)
Your Geo has a brake-transaxle shift
interlock. You have to fully apply your
regular brake before you can shift from
“P’ (Park) when the ignition is in the
“ON” position. See “Automatic
Transaxle” in the Index.
4. Have the vehicle fixed as soon as
possible.
Parking Your Vehicle
(MANUAL
TRANSAXLE)
If you cannot shift out of “P” (Park), ease
pressure on the shift lever - push the
shift lever all theway into “P,’ (Park)
and release theshift lever button as you
maintain brake application. Then press
the shift lever button and move the shift
lever into the gear you wish.
If you ever hold the brake pedal down but
still can’t shift out of “P” (Park), try this:
1. Carefully pry the shift lock override
cover from the floor shift console
using a flat-bladed tool.
2. Insert the end of the flat-bladed tool
into the rectangular slot and press
down firmly.
3. While maintaining brake application,
move the shift leverinto the drive gear
you want.
Before you get out of your vehicle, put
your manual transaxle in “R” (Reverse)
and firmly apply the parking brake.
If your vehicle is equippedto tow a
trailer, see “Towinga Trailer” in the
Index.
Parking over Things That Burn
53.
.
Features and Controls
Engine Exhaust
Running Your Engine While
You’re Parked
(AUTOMATIC TRANSAXLE)
It’s better not to park with the engine
running. But if you ever have to, here are
some things toknow.
Follow the proper steps to be sure your
vehicle won’t move. See “Shifting into
‘P’ (Park)” in the Index.
If you are parking on a hill and if you’re
pulling a trailer, also see “Towing a
Trailer” in the Index.
... 54
There are individual controlsnear each
Wiiidow. Push the bottomof the switch to
open a window and the top of the switch
to raise it.
'ress the window lock switch tokeep
passengers from using their individual
window switches. Pressthe switch again
to unlock the windows.
Windows
Manual Windows
Use the window crank to open and close
each window;
Power Windows (Option)
With power windows, switches on the
driver's door control each window when
the ignition is on. Push downthe front of
the switch to lower a window and lift the
front of the switch to raise a window.
The switch for the driver's window hasan
Express Down feature. To use the Express
Down, push the switch downall the way.
Release 'the switch and the window will
lower completely.
You can also open this window any
amount by pushing the switch halfway
down and releasing it when you want the
window to stop.
Do not push the switch whenthe window
is in the Express Down mode.
Features and Controls
I
II Tilt Wheel (OPTION)
The Turn SignallLights
To sound the horn, press the horn symbol 4 tilt steering wheel allowsyou to adjust
ControlIHeadlight
on your steering wheel.
he steering wheel before you drive.
Beam Lever
I'ou can also raise it to the highest level
The lever on the left sideof the steering
o give your legs more room when you
column includes your:
:xit and enter the vehicle.
Turn Signal and Lane Change
:o tilt the wheel, hold thesteering wheel
Indicator
.nd lift the lever. Move thesteering wheel
Headlight High/Low Beam and
o a comfortable level, then release the
Passing Signal
ever to lock the wheelin place.
Operation of Lights
Horn
... 56
Operauon of Lights
1 Although
f
i
your vehicle’s lighting system
(headlights, parking lights, fog lamps,
sidemarker lights and taillights)meets all
applicable federal lighting requirements,
certain states and provinces may apply
their own lighting regulations that may
require special attention before you
Ioperate these lights.
For example, some jurisdictions may
1require that you operate your fog lamps
A green arrow on the instrument panel only when your lower beam headlights
will flash in the directionof the turn or
iare also on, or that headlights be turned
lane change.
3n whenever you must use your
windshield wipers. In addition, most
To signal a lane change,just raise or
lower the lever until the green arrow start!
3 Jiurisdictions prohibit driving solely with
to flash. Hold it there until you complete Iparking lights, especially at dawnor dusk.
your lane change. The leverwill return byr l[t is recommended that you check with
your own state or provincial highway
itself when you release it.
authority for applicable lighting
As you signal a turnor a lane change,
regulations.
if the arrows flash faster than normal, a
signal bulb may be burned
out and other
drivers won’t see your turn signal.
If a bulb is burned out, replace it to help
avoid an accident. If the green arrows
don’t go on at all when you signal a turn,
check the fuse (see “Fuses” in the Index)
and for burned-out bulbs.
I
L
Turn Signal and Lane Change
Indicator
The turn signal hastwo upward (for
Right) and two downward (for Left)
positions. These positions allow youto
signal a turn or a lane change.
To signal a turn, move the lever all the
way up or down. When the turn is
finished, the lever will return
automatically.
(
1
57
...
Features and Controls
Turn the outside portionof the lever to
Interior Lights
Headlight High/Low Beam
control the lights. There are three
Dome Light
First, you must have the headlights on.
positions for the light switch.
For high beams, push theturn signal lever This dome light hasa three position
0 OFF: All lights are off.
away from you. When the high beams are switch.
0 -:
At the middle position, the parking on, a blue light on the instrument panel
0 ON: The light comes on and stays on
lights, taillights, license plate light and also will be on. It willgo off when you
whether or not a door is open.
the instrument panel lighting come on. switch to low beam. To switch back to
The headlights are off.
0 OFF: The light stays off even when a
low beams, pull the lever toward you.
door is open.
0 : The headlights and all other
operating lights come on.
Flash-to-Pass
0 DOOR: The light comes on when a
door is opened.
With the lever in the low beam position,
Lights On Reminder
pull the lever toward youto momentarily
If you turn the ignition to“LOCK’ or
switch to high beams (to signal that you
“ACC” and leave the lightson, you’ll
are going to pass).If you have the
hear a tone when you open the driver’s
headlights on, when you release the lever
door.
they will return to low beams.
Eo
... 58
Leading Light
F you have a sunroof, you have a reading
.ght near the sunroof switch. Press the
witch to turn thelight on and press it
gain to turn itoff.
Brightness Control
This knob controls the brightness of your
instrument panel lights. Turn the knob
clockwise to brighten the lightsor
counterclockwise to dim them.
Windshield
WiperNasher Lever
The lever on the right side of the steering
column controls the windshield wipers
and washer.
Move the lever to the position you want:
0 OFF: The wipers are off.
0 PNT Intermittent wiper operation(if
your Geo has this).In light rain or
snow, you might want to use this
position rather than continuous
wiping. You can change the time
between wipes by turning the “INT
TIME” band. Turn the band toward
“S” for a longer delay or toward “F’
for a shorter delay.
59 ...
I
,
,
,
i
.
..
Features and Controls
D
B
LO: The wiperswill fun continuously
at low’ speed.
HI:The wipers will run continuously
Washers
’ress the button on the end of the lever to
pray washerfluid on’the‘windshield..The
at high speed.
MIST: (If you have mist-type wipers,
the lever doesn’t havean “INT”
position.) For a single wiping cycle,
push the leverto “MIST,” Holdit
.there fora second, thenlet go. The
wipers will stop afterone cycle. If you
want more cycles,hold the lever at
“MIST” longer.
pray will continue’untilyou release the
button. The wipers willrun once.
Heavy snow orice can overload your
wipers. A circuit breaker will stop them
until the motor cools. Clear away snowor
ice to prevent an overload.
NOTICE:
0
0
0
0
...60
When using concentrated washer
fluid, follow the manufacturer’s
instructions for adding water.
Don’t mix water with ready-touse washer fluid. Water can
cause the solution to freeze and
damage your washer fluid tank
and other partsof the washer
system. Also, water doesn’t clean
as well as washer fluid.
Fill your washer fluid tank only
3/4 full when it’s very cold. This
allows for expansion, which
could damagethe tank if it is
completely full.
Don’t use radiator antifreeze in
your windshield washer.It can
damage your paint.
I
Cruise Control (OPTION)
With Cruise Control,you can maintain a
speed of about 25 mph (40 km/h) or more
without keeping your foot on the
accelerator. This can really help on long
trips. Cruise Control does not work at
speeds below about 25mph (40 km/h).
When you apply your brakes, or push the
clutch pedal, if you have a manual
transaxle, the Cruise Control shutsoff.
To Set Cruise Control
1. Push the end of the Cruise Control
lever. The “CRUISE’ light on the
instrument panel will come on.
61 . .
Features and Controls
To Increase Speed While Using Cruise
Control
2. Get up to the speed you want.
3. Push the lever down to
“SET/COAST” and release it.
4. Take your foot off the accelerator
pedal.
... 62
There are two ways to go to a higher
speed. Here’s the first:
1. Use the accelerator pedal to get to the
higher speed.
2. Push the lever to “SETKOAST” and
hold it for less than a second. Release
the lever and the accelerator pedal.
You’ll now cruise at the higher speed.
Here’s the secondway to go to a higher
To Resume a Set Speed
speed:
Suppose you set your Cruise Control at a 0 Move the Cruise lever from“ON’ to
desired speed and then you apply the
“RES/ACC.” Hold it there until you
brake. This, of course, shuts off the
get up to the speedyou want, and then
Cruise Control. Butyou don’t need to
release the lever.
reset it. Unless you’re going about25
0 To increase your speedin very small
mph (40k m h ) or less or you slowed
amounts, move the leverto
down to 10 mph ( 16 km/h) less than your
“RES/ACC” for less than half a
preset speed, you can press the lever uptc3
second and then release it. Each time
“RES/ACC” for about half a second.
you do this, your vehicle will go about
You’ll go right back up to your chosen
1 mph (1.6 km/h) faster.
speed and stay there.
If your preset speed cancels out whenit
shouldn’t, there may be a problem with
your Cruise Control. See your dealer.
To Reduce Speed While Using Cruise
Control
There are two ways to reduce your speed
while using cruise control:
Push the lever to “SET/COAST” until
you reach the lower speedyou want,
then release it.
To slow down in very small amounts,
push the lever for less than halfa
second. Eachtime you do this, you’ll
go 1 mph (1.6 kmh) slower.
Passing Another Vehicle While Using
Cruise Control
Use the accelerator pedalto increase your
speed. When you take your
foot off the
pedal, your vehicle will slow downto the
Cruise Control speed you set earlier.
Using Cruise Control on
Hills
How well your Cruise Control will work
on hills depends upon your speed, load,
and the steepnessof the hills. When going
up steep hills, you may have to step on
the accelerator pedal to maintain your
speed. When going downhill, you may
have to brake or shift to a lower gear to
keep your speed down.Of course,
applying the brake takesyou out of
Cruise Control. Many drivers find this
to be too much trouble and don’t use
Cruise Control on steep hills.
To Get Out of Cruise Control
There are several ways to turn off the
Cruise Control:
1. Step lightly on the brake pedal or push
the clutch pedal, if you have a manual
transaxle.
2. Move the shift lever to “ N ’ (Neutral)
if you have an automatic transaxle.
3. Press the Cruise “ON-OFF’’ button
again or pull the lever toward you to
cancel.
II Mirrors
I:nside Daymight Rearview Mirror
Pin inside rearview mirror is attached to
Y our roof. The mirror hasa pivot so that
~ O Ucan adjust itup and down or sideto
Side.
7
tou can adjust the mirrorfor day or nigh
Clriving. Pull the tabfor night driving to
r‘educe glare. Pushthe tab for daytime
cIriving.
To Erase Speed Memory
When you turn off the Cruise Control or
the ignition, your Cruise Control set speec1
memory is erased.
63 ...
Features and Controls
Convex Outside Mirror
Your right side mirror may be convex.
A convex mirror’s surface is curved so
you can see more from the driver’s seat.
lanes.
I
Manual Adjust Mirrors
Adjust these mirrors by hand so that you
can just see theside of your vehicle when
you are sitting in a comfortable driving
position.
.. 6 4
Electric Mirror Control(Option)
The electric mirror control is to the left
of your steering wheel.To adjust either
mirror, move the switch to“L,” (left) or
“R’ (right). Then use the round touch pad
to adjust the mirror.When you are done
adjusting the mirrors, move the control
back to the center.
Sunroof
You can tilt or open your sunroof. To tilt
the sunroof, press the switch marked
“UP.” Press the other endof the switch
to lower the sunroof.Your ignition must
be on for this switch to work.
To open the sunroof, push the “SLIDE’
arrow that points to the rear of the
vehicle. To close it, push the other arrow
that points to the front of the vehicle.
The sunroof will close partially then
stop. Push the arrow again to close it
completely. You can open the sunroof to
any position.
If the sunroof will not close, follow these 1. Close the sunroof by hand as far as it
instructions:
will go. Then find the special
crank-shaped screwdriver in your tool
1. Remove the cover screw and take off
bag. It is in your trunk. Insert the
the sunroof control cover.
screwdriver into the hole and turn it
2. Carefully remove the inside screw,
clockwise until the sunroof is closed.
washers and spacers. Be careful not to
E5e sure to have the sunroof checked by
lose this screw, the washers orthe
Y‘our Geo dealer as soon as possible.
spacers because the sunroofwon’t
work without them.
I
os...
Features and Controls
Storage and
Compartments
Cupholder
To open the cupholder, push and release
the bar and the cupholder will slide out.
With cups removed, pushit back in to
store.
... 66
Console Storage Area
A small storage areais in the console
between the seats. If there is a cover, lift
it up to access the storage area.
Door Storage Compartments
The driver's door has a maplstorage
compartment. You may also have a
storage compartment on your passenger
door.
Glove Box
Visors
To open the glove box door, squeeze the To block out glare, youcan swing down
buttons.
the visors.
Always keep the glove box door closed
You can also swing them to the side.
while driving.
Sun
Visor Vanity Mirrors (Option)
Swing down the sun visor. Pull down th
cover to expose the vanity mirror.
Features and Controls
I
Passenger Assist Grips
Ashtrays and Lighter
Your Geo may have assist grips.
Front Ashtray
Passengers can use the grips
to help keep
To
their balance over rough roads or during Pull the door to open the ashtray.
remove
it,
push
down
on
the
part
marked
sharp turns.
“PUSH” at the back, then pull it out.
Rear Ashtray
You have an ashtray behind the console.
Full the doorto open it. To remove it,
press the tab and pull it out.
l
Don’t put papers and other things
that bum into your ashtray.If you do,
cigarettes or other smoking materials
could set them on fire, causing
damage.
When you are done using the ashtray,
push it back to close it.
Cigarette Lighter
To use the ligher, push the lighter in all
the way and let go. When it’s ready, it will
pop back by itself. The lighter won’t work
if the key is in “LOCK.”
NOTICE:
Don’t hold a cigarette lighter in with
your hand while it is heating. If you
do, it won’t be able to back away
from the heating element when it’s
ready. That can make it overheat,
damaging the lighter and the heating
element.
69 ...
Features and Controls
...70
lnstrument Panel
1. Side Window Defogger Vents
2. BrightnessControl
3. Turn Signamights ControllHeadlight
Beam Lever
4. InstrumentCluster
5. Windshield Wiper Control
6. Windshield Washer Button
7. RearWindow Defogger
8.
9.
10.
11.
12.
13.
14.
HazardWarningFlashers
Glove Box
Comfort Control System
AudioSystem
Cupholder
Ashtray
Coinholder
15.
16.
17.
18.
19.
20.
21.
22.
ShiftLever
Lighter
CruiseControl
IgnitionSwitch
Horn
Tilt Wheel Lever
HoodRelease
Electric Mirror Control
71
...
Features and Controls
you’ll need to know to drive safely and
economically.
If you have the optional cluster, your
Your instrument cluster is designedto let instrument panel givesyou additional
you know at a glance how your vehicle is information. The cluster includesa
running. You’ll know how fast you’re
tachometer.
going, about how much fuel you have left
in your fuel tank and manyother things
Instrument Panel and
Clusters
I
.72
Speedometer and Odometer
Your speedometer lets you see your speed
in both miles per hour (mph) and
kilometers per hour (km/h). Your
odometer showshow far your vehicle has
been driven, in miles.
Trip Odometer
The trip odometer can tellyou how far
your vehicle has been driven since you
last set the trip odometerto zero.
To set the trip odometer to zero, press the
knob.
Tachometer
The tachometer shows engine speedin
thousands of revolutions per minute
(rpm).
I NOTICE:
Do not operate the engine with the
tachometer in the red area, or engine
damage
occur. may
I
I
73 ...
Features and Controls
Warning Lights, Gages
and Indicators
This section describesthe warning lights
and gages thatmay be on your vehicle.
The pictures will helpyou locate them.
Warning lights and gages can signal that
something is wrong before it becomes
serious enough to cause an expensive
repair or replacement. Paying attention to
your warning lights and gages could also
save you or others from injury.
Warning lights go on when theremay be
or is a problem with one of your vehicle’s
functions. As you will see in the details
on the next few pages, somewarning
lights come on briefly when youturn the
ignition key just to let you know they’re
working. If you are familiar with this
section, you should not be alarmed when
this happens.
Gages can indicatewhen there may be or
is a problem with oneof your vehicle’s
functions. Often gages and warning lights
work together to let you know when
there’s a problem with your vehicle.
When one of the warning lights comes on
and stays on when you are driving, or
when one of the gages shows theremay
...74
be a problem, check the section that tells
you what to do about it. Please follow the
manual’s advice. Waiting todo repairs
can be costly- and even dangerous.So
please get to know your warning lights
and gages. They’re a big help.
Fuel Gage
Your fuel gage shows abouthow much
fuel is in your tank. The fuel gage works
only when the ignition switchis “ON.’’
When the gage first indicates“E,” you
still have a little fuel left (about oneor
two gallons), but you need to get more
right away.
Here are four concerns some owners have
had about the fuel gage. All these
situations are normal and do not indicate
that anything is wrong with the fuel gage.
0 At the gas station, the fuel pump shuts
off before the gage reads“F?’
0 It takes more (or less) fuel to fill up
than the gage reads. For example, the
gage readshalf full, but it took more
(or less) than half of the tank’s
capacity to fill it.
The gage moves a little when you
turn, stop or speed up.
When you turn the engine off, the
gage doesn’t go back to“E.”
closer to the floor.It may take longer to
stop, If the light isstill on, or if the
anti-lock brake system warning light is
flashing, have the vehicle towed for
service. (See “Anti-Lock Brake System
Warning Light” and “Towing Your
Vehicle” in the Index.)
Brake System WarningLight
Your Geo’s hydraulic brake system is
divided into two parts. If one part isn’t
working, the other part can still work and
stop you. For good braking, though, you
need both parts working well.
If the warning light comes on, there could
be a brake problem. Have your brake
system inspected rightaway.
This 1ight.should comeon as you start the The brake system warning light willalso
vehicle. If’itdoesn’t come onthen, have it come on when you set your parking
fixed so it will be readyto warn you if
brake, and it will stay on if your parking
there’s a problem.
brake doesn’t releasefully. If it stays on
after your parking brake is fully released,
If the light comes on whileyou are
it
means you have a brake problem.
driving, pull off the road andstop
carefully. You may notice that the pedal is
harder to push. Or, the pedal maygo
75
...
Features and Controls
See “Towing Your Vehicle” in the
Index.)
Mi-Lock Brake System Warning
Aght (Option)
Mith anti-lock, this light will come on
vhen you start your engine andit will
;tay onfor three seconds. That’s normal.
.f the light doesn’t comeon, have it fixed
10 it will be ready to warn you if there’s.a
Iroblem.
:f the light flashes while you’redriving,
v‘ou don’t have anti-lock brakes aqd
.here’s a problem with your regular
)rakes. Pulloff the road and stop
:arefully. You may notice that the pedalis
larder to push. Or, the pedal maygo
:loser to the floor. It may take longerto
stop. Have the vehicle towedfor service.
... /b
inti-Lock Brake System Active Light
,Option)
Nhen your anti-lock system is adjusting
)rake pressureto help avoid a braking
Lf the anti-lock brake system warning
;kid, the “ABS ACTIVE’ light will come
light stays on longer than normal after
In. Slippery road conditions may exist if
you’ve started your engine,turn the
.his light comes on,so adjust your driving
ignition off. Or, if the light comes onand iccordingly. The light will stay onfor a
stays on when you’redriving, stop as
Few seconds after the system stops
soon as possible and turnthe ignition off. idjusting brake pressure. The“ABS
Then start the engine againto reset the
4CTIVE”’light.will also come on briefly,
system. If the light still stayson, or comes %sa bulb check, when the engineis
on again while you’redriving, your Geo
jtarted.
needs service.If the light is on but not
flashing and the regular brake system
warning light isn’t on, youstill have
brakes, but you don’t have anti-lock
brakes.
have a problem with thefuse or bulb.
Have it fixed right away.
Sometimes when the engine is idling
at a stop, the lightmay blink on and
off. This is normal.
If you make a hard stop, the light may
come on for a moment. This is
normal.
Engine Coolant Temperature Gage
This gage shows the engine coolant
temperature. If the gage pointer moves
into the red area, your engine is too hot! It
means that your engine coolant has
overheated. If you have been operating
your vehicle under normaldriving
conditions, you should pull off the road,
stop your vehicle andturn off the engine
as soon as possible.
HOT COOLANT CAN BURN YOU
BADLY!
In “Problems on the Road,” this manual
shows what to do. See “Engine
Overheating” in the Index.
Engine Oil Pressure Light
If you have a problem with youroil, this
light may stay on after you start your
engine, or come on when you are driving.
This indicates that there is not enough oil
pressure to keep yourengine properly
lubricated and cool. The engine couldbe
low on oil, or have some otheroil related
problem. Have it fixed right away.
The oil light couldalso come on in three
other situations.
When the ignition is on but the engine
is not running, the light will come on
as a test to show you it is working, but
the light willgo out when you turn the
ignition to “START.” If it doesn’t
come on with the ignitionon, you may
I NOTICE:
I
I
Damage to your engine from
neglected oil problems canbe costly
and is not covered by your warranty.
77.
I
.
Features and Controls
NOTICE:
If you keep driving your vehicle with
this light on, aftera while the emission controls won’t work as well,
your fuel economy won’t be as good
and your enginemay not run as
smoothly. This could leadto costly
repairs not coveredby your warranty.
Charging System Light
This light will comeon briefly when you
turn on the ignition, butthe engine is not
running, as a check to show youit is
working. Then it shouldgo out when the
engine starts. If it stays on, or comes on
while you are driving, you may have a
problem with the electrical charging
system, It could indicate that you have
a
loose generator drive beltor another
electrical problem. Haveit checked right
away. Driving while this lightis on could
drain your battery.
If you must drive a short distancewith the
charging system light on,be certain to
turn off all your accessories, such as
the
radio and air conditioner.
...78
Malfunction Indicator Lamp (Check
Engine Light)
A computer monitors operation of your
fuel, ignition and emission control
systems. This light should come onwhen
i:
the ignition is turned on, but the engine
not running, as acheck to show you it is
working. If it does not come on at all,
have it fixed right away. If it stays on, or
comes on while you are driving, the
computer is indicating thatyou have a
problem. You should take your vehiclein
for service soon.
herdrive Off Light
.f you have an automatic transaxle with
herdrive, this light appears on your
nstrument cluster. The light will come on
whenever you turn off the Overdrive.
Rear Window Defogger Light
Door Warning Light
rhis light will comeon whenever the rear This light stays on if any door is not
window defogger is on. See “Rear
completely closed. The light shouldalso
Window Defogger” in the Index.
come on briefly when you turn your key
to “START.” If the light doesn’t come on
as it should, have it fixed.
79.
.
Notes
...80
Part 3
Comfort Controls& Audio
Systems
I n this part you'll find out how
to
operate the comfort control
systems and audio systems
. Be sure
offered with your Geo
to read about the particular
system supplied with your
vehicle.
Comfort Controls . .
...............................
Heater Controls . . . . . . . . . . .
................................
Air Conditioner Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RearWindowDefogger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Flow-Through Ventilation System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4udioSystems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Settingtheclock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AMFMStereo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AM/FM Stereo with Cassette Tape Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AM/FM Stereo with Cassette Tape and Compact Disc Player . . . . . . . . . . . . .
UnderstandingRadioReception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Care of Your Cassette Tape Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Care of Your Compact Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
..
Antenna . . . . . . . . . . . . . . . . . . .
82
82
83
84
84
85
86
86
87
91
95
95
96
96
81 . .
Comfort Controls -nd Audio Systems
w: This
j position directs the airflow
toward the floor.
9.: This position directs the airflow
~9
toward the t’loor, the windshield and the
side windows.
: This position directs the airflow to
the windshield and side windows.
9
Comfort Controls
With this sytem you can controlthe
heating and ventilation in your Geo. If
you have the air conditioning option, you
can also control cooling.
Your vehicle also has the flow-through
ventilation system described laterin this
section.
Heater Controls
Airflow Knob
6
.
9
: This position directs the airflow
through the instrument panel vents.
c2 : This position directs the airflow
through the instrument panel vents and
toward the floor.
... 82
Fan Knob
Turn the knob away from “OFF” to turn
the heating system on. Turn the knob
toward “HI” to increase the fan’sspeed.
Heating
1. For the quickest results, move the air
.
intake lever to2. Turn the airflow knob to
.
3. Turn the temperature knob clockwise
for warmer air.
4. Turn the fan knob toward “HI.”
5. You should switch to &b once in a
while to avoid stale air and cloudy
windows.
-2
Bi-Level
Temperature Knob
You may want to use bi-level on cool, but
Turn the knob to change the temperature sunny days. This setting directs outside
of the air flowing fromthe system. Turn air toward your body and warmer air
toward your feet.
the knob clockwise to increase the
temperature. Turn the knob counter1. Movethe air intakeleverto
.
clockwise to decrease the temperature.
2. Turn the airflow knob to
.
The air temperature can’t be less than the
3. Turn the temperature knobto the
outside air temperature.
white area.
Air Intake Lever
4. Turn the fan knob toward“HI.”
Choose this position to recirculate
the inside air through the comfort control
system.
: Choose this position to circulate
outside air through the comfort control
system.
cs
e:
Ventilation
Cooling
For mild the outside temperatures, when
very little heating is required, you canstill
direct outside air through your vehicle.
1. Move the air intake lever to -.
2. Turn the airflow knob to
.
3. Turn the temperature knob to a
comfortable setting.
4. Turn the fan knob toward “HI.”
&>
Defogging and Defrosting
Windows
1. Move the air intake lever to
2. Turn the airflowknobtoto
direct air to the windshield vents.
3. Turn the temperature knob clockwise.
4. Turn the fan knob toward “HI.”
When the windshield is clear, turn down
the fan speed.
To defog the side windows, turn the
If you have the air
airflow knob to
conditioning option, push the “NC”
button for quickerdefogging.
cj.
The air conditioner works best if you keep
your windows closed. On very hot days,
open the windowsjust long enoughfor
the hot air toescape.
1. Push the “NC” button.
2. Move the air intake lever to-for
normal cooling. For faster cooling
move the lever to
3. Turn the airflow knob to
.
4. Turn the temperature control knob
Air Conditioner Controls(OPTION)
counterclockwise.
The air conditioning system uses thesame 5. Turn the fan knob to “HI.”
controls as the heating system.The
function of each control is explained
Dehumidifying
under “Heater Controls” in this part. The
incoming air is cooled and dehumidified On days when it is raining or the humidity
is high, follow these dehumidifying steps
instead of being heated.
instead of the coolingdirections. It will
N C : Push this button to change your
help clean windows that are cloudy with
comfort control system from heating to
moisture.
air conditioning. A light will come on
1. Push the “NC”button.
when the air conditioning is on. The
2. Move the air intake lever to=.
“NC” button can also control the
humidity in your vehicle.
3. Turn the airflow knob to
4. Turn the fan knob to “HI.”
5. Adjust the temperature knob to a
comfortable setting.
e.
*>
w.
83 ...
Comfort Controls andAudio Systems
Do not attach anything likea temporary
dehicle license or a decal across the
lefogger grid onthe rear window.
NOTICE:
Don’t use a razor blade or something
else sharp on the inside
of the rear
window. If you do, you could cut or
damage the warming grid, and the
repairs wouldn’t be coveredby your
warranty.
Rear Window Defogger( o p m v )
rhe rear window defogger usesa
the rear
warming grid to remove fog from
window.
Press the switch to turn on the defogger.
The defogger will stay on for about
14 minutes, then will shut off
mtomatically. You can also turnit off by
xessing the switch again. Useit only
when the engine is running. Make sure
you turn the defogger off when the
window is clear. Leaving the defogger on
For a long time could cause the battery to
run down, especially during stop andgo
driving. The defoggeris not designed for
drying water or melting snow.
...84
Vow-Through Ventilation
;ystem
!our Geo’s flow-through ventilation
ystem supplies outside air into the
fehicle when it is moving. Outside air
vi11 also enter the vehicle when the heater
Ir the air conditioning fan is running and
he air intake lever is at-.
Audio Systems
Your Delco@audio system has been
designed to operate easily and give years
of listening pleasure. But you will get the
most enjoyment out ofit if you acquaint
yourself with it first. Find out what your
Delco@ system cando and how to operate
all its controls, to be sure you’re getting
the most outof the advanced engineering
that went into it.
I
Ventilation Tips
Keep the hood andfront air inlet free
of ice, snow, or anyother obstruction
(such as leaves). The heater and
defroster will work far better, reducin,
the chance of fogging the inside of
your windows.
When you enter a vehicle in cold
weather, move the fan lever toward
“HI” for afew moments before
driving off. This helps clear the intakc
ducts of snow and moisture, and
reduces the chance of fogging the
inside of your windows.
Keep the air path under the front seats
clear of objects. This helps air to
circulate throughout your vehicle.
NOTICE:
Before you add any sound equipment
to your vehicle - like a tape player,
CB radio, mobile telephone or
two-way radio - be sure you can
add what you want. If you can, it’s
very important todo it properly.
Added sound equipment may interfere with the operation of your
vehicle’s engine, DelcoB radio or
other systems, and even damage
them. And, your vehicle’s systems
may interfere with the operation of
sound equipment that has been added
improperly.
So, before adding sound equipment,
check with your dealer and be sure to
check Federal rules covering mobile
radio and telephone units.
Comfort Controls and Audio Systems
Setting the Clock
AM/FM Stereo
1. Press and hold “RCL” (TIME SET).
At the same time, press and hold
“TUNE 4” (HR) until the correct
hour appears.
2. Press and hold “RCL” (TIME SET).
At the same time press and hold
“TUNE b”(MIN) until the correct
minute appears.
AM/F” Stereo with CassetteTape
Player
1. Press and hold “RCLPROG” (TIME
SET). At the same time, press and
hold “TUNE 4” (HR) until the
correct hour appears.
2. Press and hold “RCLPROG” (TIME
SET). At the same time press and
hold “TUNE b”(MIN) until the
correct minute appears.
AM/FM Stereo with Cassette Tape
and Compact Disc Player
1. Press and hold “RCL VA” (TIME
SET). At the same time, press and
hold “TUNE 4” (HR) until the
correct hour appears.
2. Press and hold “RCL VA” (TIME
SET). At the same time press and
hold “TUNE b”(MIN) until the
correct minute appears.
. .86
AMIFM Stereo
To Play the Radio
Turn the “ONNOL” knob to turnthe
system on oroff.
Volume: Turn the “ONNOL” knob to
adjust the volume.
Finding a Station
Band: Press “AM-FM’ to get AM or
FM. The lighted display shows your
selection.
n n e : Press “TUNE b”or “TUNE 4”
to go to a higher or lower station. Press
and hold to continue tuning and release
when you find your station. The display
will show the frequency of each station
tuned.
Seek: Press “SEEK b”or “SEEK 4”
and the radio will tuneto the next higher
or lower station and stay there.
Pushbuttons: The six pushbuttons let
you return to your favorite stations. To
set the pushbuttons for up to 12 stations
(6 AM and 6 FM), just:
1. Tune in the station.
2. Press and hold one of the
pushbuttons for at least two seconds.
The sound will go away for a second
and will return when the station is
stored.
Repeat these steps for each pushbutton.
Setting theTone
Treble: Turn the “TREB” knob tothe
right to hear more treble.
Bass: Turn the “BASS” control behind
the “TREB” knob to the rightto hear
more bass.
Adjusting the Speakers
Fade: Turn the “FADE’ knob to move
the sound between the front and rear
speakers.
Balance: Turn the ‘‘BAL” control
behind the “FADE’ knob to move the
sound between the left and right
speakers.
Recall
Press “RCL” to see the station being
played for a moment. ‘Or,press it if you
want to see the time when the ignition is
off.
RADIO
PRESET
AMIFM Stereo with Cassette
Tape Player
To Play the Radio
Turn the “ONNOL” knob to turn the
system on or off.
Volume: Turn the “ONNOL” knob to
adjust the volume.
Band: Press “AM-FM” to get AM, FM1
or FM2. The lighted display shows your
selection.
’hne: Press “TUNE F”or “TUNE 4’
to go to higher or lower stations. Press
and hold to continue tuning and release
when you find your station. The display
will show the frequency of each station
tuned.
Seek: Press “SEEK b”or “SEEK 4”
and the radio will tune to the next higher
or lower station and staythere.
87
...
Comfort Controls andAudio Systems
Pushbuttons: The six pushbuttons let you
return to your favorite stations. To set the
pushbuttons for up to 18 stations (6 AM,
6 F M 1 and 6 FM2), just:
1. Tune in the station.
2. Press and hold one of the pushbuttons
for more than two seconds. The sound
will go away for a second and will
return when the station is stored.
Repeat these stepsfor each pushbutton.
Preset Scan:Press the “PRESET SCAN”
button to hear eachof your preset stations
for a few seconds. When you want
to stop
at a chosen station, press “PRESET
SCAN” again.
ettings designed for “ROCK,” “NEWS,”
‘POP,”‘‘JAZZ” and “CLASSICAL.”
‘ROCK” will appear whenyou first press
‘TONE SELECT.” Each time you press
t, another setting will appear on
the
lisplay. Press it after “CLASSICAL” and
one control will be back
to the treble and
)ass knobs.
’he longer side withthe tape visible
hould face to the right. If you hear
lothing or hear just a garbled sound, it
nay not be in squarely. Press“,A7’ to
emove the tape and start over.
h c e the tapeis playing, use the knobs
or volume, fade and balance,just as you
€0for radio. The lighted arrows show
which side of the tape is playing.
hdjusting the Speakers
Metal Tapes: Your bias is set
Fade: Turn the “FADE” knobto move the mtomatically. Whena metal or chrome
sound between thefront and rear
[ape is inserted, “MTL” will appear the
on
speakers.
display.
Balance: Turn the “BAL” control behind Fast Forward:Press “FF”to advance
he “FADE’ knob to move the sound
*apidlyto another partof the tape. Press
letween the right and left speakers.
‘FF,” “RCLPROG’ or “mA” to return to
?laying
speed.
Setting theTone
Recall
Rewind: Press “REW’ to reverse the tape
Treble: Turn the “TREB” knobto the
Press “RCL” to see the station being
rapidly. Press “REW,” “RCLRROG’ or
right to hear more treble.
‘.A’ to return to playing speed.
Bass: Turn the“BASS” control behindthe played for a moment. Or, press itif you
want to see the time when the ignition is Next Selection: Press “NEXT” to go
“TREB” knob to the right to hear more
off.
forward to the beginningof the next
bass.
selection. Press“NEXT” ‘againor press
Treble and bass cannot be adjusted
To Play a CassetteTape
A.“
to cancel this
“RCLPROG’
or”
manually when “TONESELECT” is on.
Your tape player is built to work best
with function.
Loud: To increase the bass tone at low
tapes that are 30 to 45 minutes long on
For “NEXT.” to work properly, your tape
volumes, press the“LOUD’ button.
each side. Tapes longer than that are
so
must have at least three or four seconds
of
Tone Select: Press “TONE SELECT” to thin they may not work well in this playel silence between each selection.
choose preset treble and bass equalization
..A8
Previous Selection:Press “PREV” to go
back to the beginning of the last selection.
Press “PREV” again or press
’
A
.
“
to cancel this
“RCLPROG’ or ,
function.
Program: Press “RCLPROG” to switch
from one side of the tape to the other.
Your cassette tape player can play
continuously because the player has an
auto-reverse feature.
Noise Reduction:Press 00 @toremove
noise from Dolby@B NR-encoded tapes.
Dolby@B Noise Reduction manufactured
under license from Dolby Laboratories
Licensing Corporation.
@symbolare
“Dolby@”and the
trademarks of Dolby Laboratories
Licensing Corporation.
Eject: Press”
A.“
to remove the tape
1 and switch to radio.
Radio Monitor: Press the “RADIO
’ MNTR” button to hear the radio when
you are fast forwarding or reversing a
cassette tape. You can use the “TUNE,”
“SEEK’ and “PRESET-SCAN” buttons
while in the radio monitor mode.
an
~
~
1
Theft Deterrent Feature
You are now ready to enter your security
The theft detenent,.featurefor the AMPM :ode. Don’t wait more than 15 seconds
between steps.
stereo with cassette tape player can be
used or ignored. If ignored, the system
5. Press “4SEEK b” or ‘‘4TUNE b”
plays normally. If it is used, your system
and “0000” will appear onthe
won’t be usable if it’sever stolen.
display.
6. Press “SEEKI” and hold it until the
Setting Your Security Code
first digit of your code appears.
The instructions below tell you howto
Release the button.
enter a security codeinto the system. If
7. Press “SEEK
and hold it until the
your vehicle loses battery power
for any
second digitof your code appears.
reason, you mustenter the security code
Release the button.
again beforethe system will turn on.
8. Press “TUNE 4’’ and hold it until the
1. Write down any four-digit number and
third digit of your code appears.
keep it ina safe place.
Release the button.
2. Turn on the ignition switch to the
9. Press “TUNE
and hold it until the
“ACC” or “ON’ position.
fourth digit of your code appears.
3. Turn the audio system off.
Release the button.
4. Press the “1” and “4” buttons together. I O . Press “AM-FM” after you have
Hold them down until“- - - -” shows
checked thatthe code you enteredis
on the display.
the one you wrote down. “rEP” will
appear in the display, which means
you need to repeat steps 5 through 9.
11. Press “AM-FM”again and the
display will now show “SEC.”
,”
,”
89
...
Comfort Controls andAudio Systems
How to Shut Off the Theft-Deterrent
Feature
If your radio issec..,ed (“SEC” shows on
the display) and you wish to disable it,
enter your security code as follows,
pausing no more than 15 seconds between
steps:
1. Press the “1” and “4” buttons together.
Hold them down until “SEC” shows
on the display. You are now ready to
enter your security code.
2. Press the “SEEKI” button and hold it
until the first digitof your code
appears.
3. Press the “SEEK b”button and hold it
until the second digitof your code
appears.
4. Press the “TUNE 4” button and hold
it until the third digitof your code
appears.
... 90
,”
5. Press the “TUNE button and hold
it until the fourth digitof your code
appears.
6. Press “AM-F”’ after you have
checked that the code you entered
matches the one you wrote down.
_ _ - -” should now appear in the
display.
[f the code is correct, the radiowill now
Dperate. If the code is wrong, “Err” will
appear in the display.
6b
To Unlock the System Aftera Power
Loss
If power is disrupted to the radio while in
the “SEC” mode, the unit will not work
and “LOC’ will show on the display
whenever the ignition is on. To unlock the
unit:
1. Press “4SEEK
or ‘b4
TUNE b”
and “0000” will appear on the display.
2. Press the “SEEKq” button and hold it
until the first digit of your code
appears.
3. Press the “SEEK button and hold it
until the second digitof your code
appears.
4. Press the “TUNE4’’ button and hold
it untilthe third digit of your code
appears.
5. Press the “TUNE b” button and hold
it until the fourth digit
of your code
appears.
6. Press “AM-FM”after you have
checked that the code matches the one
you wrote down. Now“SEC” will
appear on the display.
,”
,”
LOU0
AM/FM Stereo with Cassette
Tape and Compact Disc p/ayer
To Play the Radio
Turn the “ONNOL” knob to turn the
system on or off.
Volume: Turn the “ONNOL,” knob to
adjust the volume.
I
Finding a Station
Band: Press “AM-FM” to get AM, FM 1
or FM2. The lighted display shows your
selection.
’lhne: Press and hold “TUNE b”or
“TUNE 4” to go to higher or lower
stations. Release when you find your
station. The display will show the
frequency of each station tuned.
Seek: Press “SEEK b”or “SEEK 4”
and the radio will tune to the next higher
or lower station and staythere.
Pushbuttons: The six pushbuttons let
you return to your favorite stations. To
set the pushbuttons for up to 18 stations
(6 AM, 6 FMl and 6 FM2), just:
1. Tune in the station.
2. Press and hold one of the
pushbuttons for more than two
seconds. The sound will go away for
a second and will return whenthe
station is stored.
Repeat these steps for each pushbutton.
Preset Scan:Press the “PSCAN’ button
to hear eachof your preset stations for a
few seconds. When you want to stop at
a chosen station, press “PSCAN’ again.
Setting theTone
Treble: Turn the “TREB” knob to the
right to hear more treble.
Bass: Turn the“BASS” control behind
the “TREB” knob to the right to hear
more bass.
Loud: To increase the bass tone at low
volumes, press the “LOUD” button.
91 .
.
Comfort Controls andAudio Systems
:ach side. Tapes longer than that areso
Tone Select: Press “TONE SELECT” to
choose preset treble and bass equalization hin they may not work well inthis player.
settings designedfor “ROCK,” “NEWS,” rhe longer side with the tape visible
“POP,” “JAZZ” and “CLASSICAL.”
;hould face to the right.If you hear
“ROCK’ will appearwhen you first press lothing or hear just a garbled sound, it
nay not be in squarely. Press“STOF’” or
“TONE SELECT.” Each time you press
‘EJECT” to remove the tape andstart
it, another setting will appear on
the
wer.
display. Press it after “CLASSICAL,” and
tone control will be back the
to treble and 3nce the tapeis playing, usethe knobs
bass knobs.
ror volume, fade and balance,just as you
io for radio. The lighted arrowsshow
Adjusting the Speakers
which side of the tapeis playing.
Fade: Turn the “FADE’ knob to move the Metal Tapes: Your bias is set
sound betweenthe front and rear
automatically. When a metal or chrome
speakers.
tape is inserted, “MTL” will appear on the
display.
Balance: Turn the “BAL” control behind
the “FADE’ knob to move the sound
Fast Forward: Press “FF”to advance
between the right and left speakers.
rapidly to another part of the tape. Press
“FF,” “RCLIA” or “STOP” to return to
Recall
playing speed.
Press “RCLIA” to see the station being Rewind: Press “REW’ to reverse the tape
played for a moment. Or, pressit if you
rapidly. Press “REW,” “RCLIA” or
want to see the time when the ignition is
“STOP” to return to playing speed.
Off.
Next Selection: Press “NXT’ to go
forward to the beginningof the next
To Play a CassetteTape
selection. Press “NXT” again or press
Your tape player is built to work best with “RCLVA” or “STOP”to cancel this
tapes that are 30 to 45 minutes long on
function.
..- 9 2
Previous Selection: Press “PRV’ to go
back to the beginningof the last selection.
Press “PRV” again or press “RCLVA” or
”STOP” to cancel this function.
For “NXT” and “PRV’ to work properly,
your tape must have at least three
or four
seconds of silence between each
selection.
Repeat: Press “FWT”to go to the
beginning of the selection and play
it
again. Press “RPT”again to cancel this
function.
Noise Reduction:Press 00 @toremove
noise from Dolby@€3 NR-encoded tapes.
Dolby@B Noise Reduction manufactured
under license from Dolby Laboratories
Licensing Corporation.
“Dolby@”and the00 symbol are
trademarks of Dolby Laboratories
Licensing Corporation.
Radio Monitor:When playing a tape,
press “RDM’ during “FF” or “REW’ to
hear the radio. Press“RDM’ again to turn
the radio off. During “RDM’ operation,
only “TUNE,” “SEEK” and “PSCAN”
will work.
Tape Sides:Press “RCLVA” to switch
from one sideof the tapeto the other.
@
1
Stop: Press “STOP” to stop the tape and
switch to radio.
Eject: Press “EJECT” to remove the tape
and switchto radio.
Previous ’hack: Press “PRV” to hear a
track again. If you hold this button, or
press it more than once, thedisc will
return to previous tracks.
Next ’hack: Press “NXT” to hear the
To Play a Compact Disc
next tracknow (instead of waiting until
the present track isfinished).
Don’t use the mini-discs (3’’ singles).
They won’t eject. Use full-size compact
If you hold this button,or press it more
discs.
than once, thedisc will advance further.
Insert your disc into the CD slot on your Rewind: Press and hold“REW’to return
audio system.
rapidly to a favorite passage. Releaseit to
play the passage.
If the disc comes back out, it could be
that:
Fast Forward:Press and hold“F’F” to
advance quickly withina track. Release it
0 The disc is upside down.
to resume playing.
It is dirty, scratched, or wet.
Compression: Press “COMP” to make
0 There is too much moisture in the air.
soft and loud passages more nearly equal
(If there is, wait about one hour and in volume.
try again.)
Repeat: Press “RPT”once to hear a
If you see “Err”on the display, thedisc
selection over again.
player is too hot to play the disc. Press
Random: Pressing “RDM’ will cause the
“RCLVA” to take “Err” off the display.
CD player to play the tracks back in
Track Number and Playing Time:
Press random order. To cancel the random
“RCLVA” to see which trackis playing. feature, press “RDM,” “STOP’ or “RPT.”
Press it again withinfive seconds to see
Stop: Press “STOP” to stop playing the
how long it has been playing.
disc and switch to radio. Press “STOP”
The track number also appears when the again to restart the disc at the point where
disc is inserted or you change the volume.
it stopped. Press “AM-FM”to cancel CD
operation and listento the radio.
stop:
CD-Tape:Press “CD-Tape” to switch
between playing a tape and a CD when
both are inserted.
Eject: Press “EJECT” to eject the disc
and the radio will play. The disc will start
playing at track1 when you reinsert it.
Special Eject
If you choose, you can eject only the tape
or CD when you have both a CD and a
tape in your audio system.
CD Only: To eject only the CD, press
“EJECT” and then press“REW.’’
Tape Only: To eject only the tape,
press “EJECT” and then press “PRY”
Theft Deterrent Feature
The theft deterrentfeature for the A I ”
stereo with cassette tape and compactdisc
player canbe used or ignored. If ignored,
the system plays normally.If it isused,
your system won’tbe usable if it’s ever
stolen.
93 ...
Comfort Controls and AudioSystems
Setting Your Security Code
The instructions belowtell you how to
enter a security code into the system. If
your vehicle loses battery power
for any
reason, you must enter the security code
again beforethe system will turn on.
1. Write down any four-digit number and
keep it in a safe place.
2. Turn on the ignition switch to the
“ACC” or “ON’ position.
3. Turn the audio system off.
4. Press the “1” and “4” buttons together.
Hold them down until“- - - -” shows
on the display.
You are now ready to enter your security
code. Don’t wait more than 15 seconds
between steps.
5. Press “4SEEK b”or “4TUNE b”
and “0000” will appear on the
display.
6. Press “SEEKd” and hold it until the
first digit of your code appears.
Release the button.
7. Press “SEEK b”and hold it until the
second digit of your code appears.
Release the button.
...94
8. Press “TUNE 4”and hold it until the
third digit of your code appears.
Release the button.
9. Press “TUNE b”and hold it until the
fourth digitof your code appears.
Release the button.
IO. Press “AM-FM” after you have
checked that the codeyou entered is
the one you wrote down. “rEP” will
appear in the display, which means
you need to repeat steps5 through 9.
d l . Press “AM-FM”again and the
display will now show “SEC.”
3. Press the “SEEK b”button and hold it
until the second digitof your code
appears.
4. Press the ‘‘TUNE 4 ’ button and hold
it untilthe third digit of your code
appears.
5. Press the “TUNE b”button and hold
it until thefourth digit of your code
appears.
6. Press “AM-FM”after you have
checked that the code you entered
matches the one you wrote down.
- - -” should now appear in the
display.
How to Shut Off the Theft-Deterrent If the codeis correct, the radio willnow
Feature
operate. If the code is wrong, “Err”will
If your radio is secured (“SEC” shows on appear in the display.
the display) and you wish
to disable it,
To Unlock the System Aftera Power
enter your security codeas follows,
pausing no more than 15 seconds between LOSS
steps:
If power is disrupted to the radio while in
1. Press the “1” and “4” buttons together. the “SEC” mode, the unit will not work
Hold them down until “SEC” shows and “LOC” will show on the display
whenever the ignitionis on. To unlock the
on the display. You are now ready to
unit:
enter your security code.
1. Press “4SEEK b”or “4TUNE b”
2. Press the “SEEK+” button and hold it
and “0000” will appear onthe display.
until the first digit of your code
appears.
64-
2. Press the “SEEK4” button and holdit Understanding Radio Reception
until the first digitof your code
appears.
FM Stereo
3. Press the “SEEKF”button and holdit FM stereo will giveyou the best sound.
until the second digitof your code
But FM signals will reach only about10
appears.
to 40 miles ( 16 to 65 km).And, tall
4. Press the “TUNE4” button and hold buildings or hills can interfere withFM
it until the third digit of your code signals, causing the sound to come and
appears.
go.
5. Press the “TUNEb”button and hold
AM
it until the fourth digit of your code
The range for mostAM stations is greater
appears.
than for FM, especially at night. The
6. Press “AM-FM’ after you have
checked that the code matches the one longer range, however, can cause stations
to interfere with each other. AM can pick
you wrote down. Now “SEC” will
up noise from things like storms and
appear on the display.
power lines. Try reducing the treble to
reduce this noise if you ever get it.
Care of Your Cassette Tape
Player
A tape player that is not cleaned regularly
can cause reduced sound quality, ruined
cassettes, or a damaged mechanism.
Cassette tapes should be storedin their
cases away from contaminants, direct
sunlight, and extreme heat. If they aren’t,
they may not operate properly or cause
failure of the tape player.
Your tape player should be cleaned
regularly each month or after every 15
hours of use. If you notice a reduction in
sound quality, try a known good cassette
to see if the tape orthe tape player is at
fault. If this other cassette hasno
improvement in sound quality, clean the
tape player.
95
...
Comfort Controls andAudio Systems
Clean your tape player witha
wiping-action, non-abrasive cleaning
cassette, and follow the directions
provided with it.
Cassettes are subject to wear and
the
sound quality may degrade over time.
Always make sure thatthe cassette tape is
in good condition before you have your
tape player serviced.
... 96
Care of Your Compact Discs
Antenna
3andle discs carefully. Store themin thei
Iriginal cases or other protective cases
tnd away from direct sunlight and dust.
'f the surface of a disc is soiled, dampen
1 clean, soft clothin a mild, neutral
ietergent solution and cleanit, wiping
iom the center to theedge.
3e sure never to touch the signalsurface
when handling discs. Pick up discs by
grasping the outer edgesor the edge of
he hole and the outer edge.
Use the knob on the endof the antenna to
raise the antenna.To lower it, hold the
antenna mast near theroof and feed it into
the holder. Do not try to lower the antenna
using the knob. Keep theantenna mast
clean for good performance.
Always lower the antenna beforeentering
a car wash.
.
4
Part
Your Driving and the Road
1
H e r e you^ find information
about driving on different kinds
of roads andin varying weather
conditions. We’ve also included
many other useful tipson
driving.
DefensiveDriving .................................................
DrunkenDriving ..................................................
Control of a Vehicle ...............................................
DrivingatNight ..................................................
Driving in the Rain ................................................
CityDriving .....................................................
Freeway Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hill and Mountain Roads ...
...................................
Winter Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Towing a Trailer ..................................................
98
98
100
106
107
108
109
111
112
114
97
...
Your Driving and the Road
Defensive Driving
The Blood Alcohol Content (BAC)of
someone who is drinking dependsupon
The best advice anyone can give about Death and injury associated with drinking four things:
driving is: Drive defensively.
and driving is a national tragedy. It’s the
0 How much alcohol is in the drink.
Please start with a very important safety number one contributor to the highway
death toll, claiming thousands of victims 0 The drinker’s body weight.
device in your Geo: Buckle
up. (See
every year. Alcohol takes away three
0 The amount of food that is consumed
“Safety Belts” in the Index.)
things that anyone needs todrive a
before and during drinking.
Defensive driving really means “be ready vehicle:
e The length of time it has taken the
for anything.” On city streets, rural roads,
drinker to consume the alcohol.
or freeways,it means “always expectthe 0 Judgment
0 MuscularCoordination
unexpected.”
Assume that pedestrians or other drivers 0 Vision
.are going to be careless and make
Police records show that almost
half of
mistakes. Anticipate what they might do. all motor vehicle-related deaths involve
Be ready for their mistakes.
alcohol - a driver, a passenger or
Rear-end collisions are aboutthe most
someone else, such as a pedestrian, had
preventable of accidents. Yet they are
been drinking. In most cases, these
common. Allow enough following
deaths are the resultof someone who
was drinking and driving. About20,000
distance. It’s the best defensivedriving
maneuver, in both city and rural driving. motor vehicle-related deaths occur each
You never know when the vehicle in
front year because of alcohol, and thousands
of you is going to brake or turn suddenly. of people are injured.
Just how much alcohol is too muchif a
person plans to drive? Ideally,no one
should drink alcohol and then drive. But
if one does, then what’s “too much”?
It
can be a lot less than many might think.
Although it depends on each person and
situation, here is some general
information on the problem.
Drunken Driving
But it’s very important to keep in mind
that the ability to drive is affected well
RESLm uum A BAG OF ;O5%
below a BAC of 0.10 percent. Research
IN THE TIME SHOWN
shows that the drivingskills of many
people are impaired ata BAC
approaching 0.05 percent, and that the
effects are worse at night. All drivers are
impaired at BAC levels above0.05
percent. Statistics show that the chance of
being in an accidentincreases sharply for
drivers who have a BAC of 0.05 percent
or above. A driver with a BAC level of
According to the American Medical
0.06 percent (three beers in one hourfor a
Association, a 180-pound (82kg) person
180-pound or 82 kg person) has doubled
who drinks three 12-ounce (355 ml)
his or her chanceof having an accident.
bottles of beer inan hour will end up with
At a BAC level of 0.10 percent, the
a BAC of about 0.06 percent. The person rhe law in most U.S. states sets the legal chance of that driver havingan accident is
imit at a BAC of 0.10 percent.In Canada
would reach the same BAC by drinking
six times greater; at a level of 0.15
three 4-ounce (1 20 ml)
glasses of wine or he limit is 0.08 percent, and in some
Ither countries it’s lower than that. The percent, the chances are twenty-five times
three mixed drinks if each had 1- 1/2
3AC will be over0.10 percent after three yeater! And, the body takes aboutan
ounces (45 ml)of a liquor like whiskey,
lour to rid itselfof the alcohol inone
o six drinks (in one hour). Of course, as
gin or vodka.
Irink.No amount of coffee or number of
ve’ve seen, it depends on how much
It’s the amount of alcohol that counts. For lcohol is in the drinks, and how quickly
:old showers will speedthat up.
example, if the same persondrank three
‘1’11 be careful” isn’t the right answer.
he person drinks them.
double martinis (3 ounces or 90 ml of
Nhat if there’s an emergency,a need to
liquor each) within an hour, the person’s
ake sudden action, as whena child darts
BAC would beclose to 0.12 percent. A
nto the street? A person with a higher
person who consumesfood just before or
3AC might not beable to react quickly
during drinking will havea slightly lower
nough to avoid the collision.
BAC level.
Dr””””GTHAT WILL
I
99
...
Your Driving and the Road
There’s somethingelse about drinking
and driving that many people don’tknow.
Medical research showsthat alcohol ina
person’s system can makecrash injuries
worse. That’s especially truefor brain,
spinal cord and heartinjuries. That means
that if anyone who has been drinkingdriver or passenger- is in a crash, the
chance of being killed or permanently
disabled is higher than
if that person had
not been drinking. And we’ve already
seen that the chanceof a crash itself is
higher for drinking drivers.
.. .IO0
Braking
3raking action involvesp
e time
tnd reaction
?irst, you haveto decide to push on the
)rake pedal. That’s perception time. Then
IOU have to bring upyour foot and do it.
fiat’s reaction time.
m.
4veragereaction
is about 314 of a
second. But that’s onlyan average. It
might be less with one driver andas long
2s two or three seconds or more with
mother. Age, physical condition,
Control of a Vehicle
dertness, coordination, and eyesightall
You have three systems that make your play a part. So do alcohol, drugs and
vehicle go whereyou want it to go. They frustration. But even in3/4 of a second, a
are the brakes, the steering and the
vehicle moving at 60 mph (100 km/h)
accelerator. All three systems have todo
travels 66 feet (20 m). That couldbe a lot
their work at the places where the tires of distance in an emergency,so keeping
meet the road.
enough space between your vehicle and
Sometimes, as when you’re driving on
others is important.
of those And, of course, actual stopping distances
snow or ice, it’s easy to ask more
control systems than the tires
and road
vary greatly with thesurface of the road
can provide. That means you canlose
(whether it’s pavement or gravel);the
control of your vehicle.
condition of the road (wet,dry, icy); tire
tread; and the conditionof your brakes.
Avoid needless heavy braking. Some
people drive in spurts - heavy
acceleration followedby heavy braking
-rather than keeping pace with traffic.
This is a mistake. Your brakes may not
have time to cool between hard stops.
Your brakes will wear out muchfaster if
you do alot of heavy braking. If you keep
pace with the traffic and allow realistic
following distances, you will eliminate a
lot of unnecessary braking. That means
better braking and longer brake life.
If your engine ever stops while you’re
driving, brake normally but don’t pump
your brakes. If you do, the pedal may get
harder to push down. If your engine stops,
you will still have some power brake
assist. But you will useit when you brake.
Once the power assist is used up, it may
take longer tostop and the brake pedal
will be harder to push.
Anti-lock Brakes (Option)
If your Geo has this system, yourGeo has
an advanced electronic braking system
that will help prevent skidding.
If you have an anti-lock brake system
(ABS), the brake pedal will sayso.
md this light on the instrument panelwil
o on when you start your vehicle.
Vhen you start your vehicle, or when yo[
egin to drive away, you may hear a
lomentary motor orclicking noise. And
ou may even notice that your brake
edal moves a little while this is goingon
‘his is the ABS system testing itself.If
lere’s a problem with the anti-lock brake
ystem, the anti-lock brake system
taming light will stay on or flash. See
Anti-Lock Brake System Warning Light‘
1 the Index.
Here’s how anti-lock works, Let’s say the
road is wet. You’re driving safely.
Suddenly an animal jumps out in front of
you.
You slam on the brakes. Here’s what
happens with ABS.
4 computer senses that wheelsare
slowing down.If one of the wheels is
3bout to stop rolling, the computer will
separately work the brakes at eachfront
wheel and at the rear wheels.
The anti-lock system can changethe
xake pressure faster than any driver
:odd. The computer is programmedto
make the most of available tire and road
conditions.
101
.
<
Your Driving andthe Road
I
locking the wheels.If you hear or feel the
working, or you may notice some noise,
wheels sliding, ease off the brake pedal.
1but this is normal. When your anti-lock
system is adjusting brake pressure to help I’his will help you retain steeringcontrol.
iavoid a braking skid, the “ABS ACTIVE” (If you& have anti-lock, it’s different:
1light will come on. See “Anti-Lock Brake see the Index under “Anti-Lock Brakes.”)
[n many emergencies, steering can help
System Active Light” in the Index.
you more than even the very best braking.
1Braking in Emergencies
Steering
At some time, nearly every driver gets
into a situation that requires hard braking.
Power Steering (Option)
If you have anti-lock,you can steer and
If you lose power steering assist because
brake at the same time. However,if you
You can steer around theobstacle while
don’t have anti-lock, yourfirst reaction - the engine stopsor the system is not
braking hard.
it will take
to hit the brake pedal hard and hold it functioning, you can steer but
As you brake, your computer keeps
much
more
effort.
down - may be the wrong thing to do.
receiving updates on wheel speed and
Your wheels can stop rolling. Once they
controls braking pressure accordingly.
Steering Tips
io, the vehicle can’t respondto your
Remember: Anti-lock doesn’t change the !steering. Momentum will carryit in
Driving on Curves
time you need to get yourfoot up to the
whatever directionit was headed when
It’s important to take curves ata
brake pedal. If you get too close to the
1the wheels stopped rolling. That could be
reasonable speed.
vehicle in front of you, you won’t have
off the road, into thevery thing you were
A lot of the “driver lost control” accidents
time to apply your brakesif that vehicle
1trying to avoid, or into traffic.
on the news happen on curves.
mentioned
suddenly slows or stops. Always leave
If
you
don’t
have
anti-lock,
use
a
Here’s why:
enough roomup ahead to stop, even
“squeeze” braking technique.This will
though you have anti-lock brakes.
Experienced driver or beginner, each of
give you maximum braking while
maintaining steering control. You do this us is subjectto the same lawsof physics
To Use Anti-Lock
when driving on curves. The tractionof
by pushing on the brake pedal with
the tires againstthe road surface makesit
Don’t pump the brakes. Just hold
the
steadily increasing pressure.In an
possible for the vehicleto change its path
brake pedal down andlet anti-lock work emergency you will probably want to
when you turn the front wheels.If there’s
for you. You may feel the system
“squeeze” the brakes hard without
1
I
I
f
1
(
. . .IO2
no traction, inertia will keep the vehicle
going in the same direction. If you’ve
ever tried to steer a vehicle on wet ice,
you’ll understand this.
The traction youcan get in a curve
depends on the conditionof your tires and
the road surface, the angle at which the
curve is banked, and your speed. While
you’re in a curve, speed is the one factor
you can control.
Suppose you’re steering through a sharp
curve. Then you suddenly apply the
brakes. Both control systems - steering
and braking-have to dotheir work
where the tires meet the road. Unless you
have four-wheel anti-lock brakes, adding
the hard braking can demandtoo much of
those places. You can lose control.
The same thing can happen if you’re
steering through a sharp curve and you
suddenly accelerate. Those two control
systems - steering and accelerationcan overwhelm those places where the
tires meet the road and make you lose
control.
What should youdo if this ever happens?
Ease up on the brakeor accelerator pedal,
steer the vehicle theway you want it to
go, and slow down.
Speed limit signs near curveswarn that
you should adjust your speed.Of course,
the posted speedsare based on good
weather and road conditions. Under
less
favorable conditions you’ll want to go
slower.
If you need to reduce your speedas you
approach a curve, do it before you enter
the curve, while your front wheels are
straight ahead.
Try to adjust your speedso you can
“drive” through the curve. Maintain a
brakes - but, unless you have anti-lock,
reasonable, steady speed.Wait to
not enough to lock your wheels.It is
accelerate until you are out of the curve,
better to removeas much speed as you
and then accelerate gentlyinto the
can from a possible collision. Then steer
straightaway.
around the problem, to the left or right
Steering in Emergencies
depending on the space available.
There are times when steering canbe
An emergency like this requires close
more effective than braking. For example, attention and a quick decision.If you are
you come over a hill and find a truck
holding the steering wheel at the
stopped in yourlane, or a car suddenly
recommended 9 and 3 o’clock positions,
pulls out from nowhere,or a child darts
you can turnit a full 180 degrees very
out from between parkedcars and stops
quickly without removingeither hand.
right in front of you. You can avoidthese But you haveto act fast, steer quickly,
problems by braking -if you can stop in and just asquickly straighten the wheel
time. But sometimes you can’t;there isn’t once you have avoided the object.
room. That’sthe time for evasive action
The fact that such emergency situations
- steering around the problem.
are always possibleis a good reasonto
Your Geo can perform very well in
practice defensive driving atall times and
emergencies like these. First apply your wear safety belts properly.
103.
I
Your Driving and the Road
Passing
The driver of a vehicle about to pass
another on a two-lane highway waits for
just the right moment, accelerates, moves
around the vehicle ahead, then goes back
into the right lane again.A simple
maneuver?
Not necessarily! Passing another vehicle
on a two-lane highway is a potentially
dangerous move, since the passing
vehicle occupies the same lane as
oncoming traffic for several seconds.A
(Iff-Road Recovery
miscalculation, an error injudgment, or a
7llou may find sometimethat your right
brief surrender to frustrationor anger can
\wheels have dropped off the edgeof a
suddenly put the passing driver face to
r.oad onto the shoulder (A) while you’re
face with the worst of all traffic accidents
driving.
- the head-on collision.
1
1F the levelof the shoulder is only slightly So here are some tips for passing:
blelow the pavement, recovery should be 0 “Drive ahead.” Look downthe road,
fiairly easy. Easeoff the accelerator and
to the sides, andto crossroads for
tlhen, if there is nothing in the way, steer
situations that might affect your
S o that your vehicle straddlesthe edge of
passing patterns. If you have any
tlhe pavement. You can turn the steering
doubt whatsoever about makinga
V vheel up to 1/4 turn (B) until the right
successful pass, waitfor a better time.
f ront tire contacts the pavement edge.
0 Watch for traffic signs, pavement
1’hen turn your steering wheelto go
markings, and lines. If you can see a
Straight down the roadway.
sign up ahead that might indicatea
turn or an intersection, delayyour
pass. A broken center line usually
I
. .IO4
0
0
indicates it’sall right to pass
(providing the road ahead is clear).
Never cross a solid line on your side
of the laneor a double solidline, even
if the road seems emptyof
approaching traffic.
Do not get too close to the vehicle you
want to pass while you’re awaitingan
opportunity. For one thing, following
too closely reduces your areaof
vision, especiallyif you’re followinga
larger vehicle. Also,you won’t have
adequate spaceif the vehicle ahead
suddenly slows or stops. Keep back
a
reasonable distance.
When it looks likea chance to pass is
coming up, start to accelerate but stay
in the right lane and don’t get
too
close. Time your moveso you will be
increasing speed as the time comes to
move into the other lane.If the way is
clear to pass, you will have a “running
start” that more than makes for
up the
distance you would loseby dropping
back. And if something happensto
cause you to cancel your pass,you
need only slow down and drop back
again and wait for another
opportunity.
0
0
0
0
0
If other cars are lined up to pass a
slow vehicle, wait your turn. But take
care that someone isn’t tryingto pass
you as youpull out to pass the slow
vehicle. Remember to glance over
your shoulder and check the blind
spot.
Check your mirrors,glance over your
shoulder, and start your left lane
change signal before moving out of
the right lane to pass. When youare
far enough ahead of the passed vehicle
to see its frontin your inside mirror,
activate your right lane change signal
and move backinto the right lane.
(Remember that your right outside
mirror is convex. The vehicle youjust
passed may seem to be farther away
from you than it really is.)
Try not to pass more than one vehicle
at a time on two-lane roads.
Reconsider before passingthe next
vehicle.
Don’t overtake a slowly moving
vehicle too rapidly. Even though the
brake lights are not flashing, it may be
slowing downor starting to turn.
If you’re being passed, makeit easy
for the following driver to get ahead
of you. Perhaps you can ease a little to A cornering skid and an acceleration skid
the right. e;%.+vi:*;. . !” p
are best handled by easing yourfoot off
..
the accelerator pedal.
Loss of Control
If your vehiclestarts to slide, ease your
Let’s review what driving experts say
foot off the accelerator pedal and quickly
about what happens whenthe three
steer the way you want the vehicleto go.
2ontrol systems (brakes, steering and
If you start steering quickly enough’, your
acceleration) don’t have enoughfriction
vehicle may straighten out. Alwaysbe
where the tires meet the roadto do what
ready for a second skidif it occurs.
the driver has asked.
Of course, tractionis reduced when water,
In any emergency, don’t give up. Keep
snow, ice, gravel,or other materialis on
trying to steerand constantly seek an
the road. For safety, you’ll wantto slow
escape routeor area of less danger.
down and adjust your drivingto these
conditions. It is important to slow down
Skidding
on slippery surfaces because stopping
[n a skid, a driver can lose controlof the distance will be longer and vehicle
control more limited.
vehicle. Defensive drivers avoid most
skids by taking reasonable care suited to
While driving ona surface with reduced
zxisting conditions, and by not
traction, try your best to avoid sudden
“overdriving” those conditions. But skids steering, acceleration, or braking
we always possible.
(including engine brakingby shifting to a
lower gear). Any sudden changes could
The three types of skids correspondto
cause the tires to slide. You may not
your Geo’s three control systems.In the
realize
the surface is slippery until your
braking skid your wheels aren’trolling. In
vehicle is skidding. Learn to recognize
the steering or cornering skid, too much
warning
clues - such as enough water,
speed or steering in a curve causes tires to
ice
or
packed
snow on the roadto make a
slip and lose cornering force. And in the
acceleration skid too much throttle causes “mirrored surface”- and slow down
when you have any doubt.
~e driving wheels to spin.
~
~
,
~
~
~
;
!
~
~
,
~
,
1: , I
.?
105
...
Your Driving and the Road
F you have the anti-lock braking system,
emember: It helps avoid onlythe braking
in
kid. If you do not have anti-lock, then
. braking skid (where the wheels are no
onger rolling), release enough pressure
m the brakes to get the wheels rolling
lgain. This restores steering control. Push
he brake pedal down steadily when you
lave to stop suddenly. Aslong as the
wheels are rolling, youwill have steering
:ontrol.
.. .IO6
Night Vision
No one can see as well at night as inthe
davtime. But as we get older these
differences increase: A 50-year-old driver
may require at least twice as much
light to
I
I Driving at Night
see the same thing at night aas
Niight driving is more dangerous than day 20-year-old.
riving. One reasonis that some drivers
alre likely to be impaired-by alcohol or What you do in the daytime canalso
affect your night vision.For example, if
dlmgs, with night vision problems, or
by
you
spend the day in bright sunshine you
fa@ye.
are wise to wear sunglasses.Your eyes
H;ere are some tipson night driving.
will have less trouble adjustingto night.
Drive defensively.
But if you’re driving, don’t wear
sunglasses at night. Theymay cut down
Don’t drink and drive.
on glare from headlights, but they also
Adjust your inside rearview mirrorto make a lot of things invisible.
reduce the glare from headlights
You can be temporarily blinded
by
behind you.
approaching lights.It can takea second or
Since you can’t see as well, you may two, or even several seconds,
for your
need to slow down and keep more
eyes to readjust to the dark. When you are
space between youand other vehicles. faced with severe glare (asfrom a driver
who doesn’t lowerthe high beams,or a
vehicle with misaimed headlights), slow
down a little. Avoid staring directly into
the approaching lights.
Keep your windshield and allthe glass on.
your vehicle clean-inside and out.
Glare at night is made much worseby dirt
on the glass. Even theinside of the glass
can build up a film caused by dust. Dirty
glass makes lights dazzle and flash more
than clean glass would, making the pupils
of your eyes contract repeatedly.
Remember that your headlightslight up
far less of a roadway when you arein a
turn or curve.
Keep your eyes moving; that way, it’s
easier to pick out dimly lighted objects.
Just as your headlights should be checked
regularly for proper aim, so should your
eyes be examined regularly. Some drivers
suffer from night blindness -the
inability to see in dim light -and aren’t
even awareof it.
I
It’s wise to keep your wiping equipment
in good shape and keep your windshield
washer tank filled. Replace your
Rain and wet roads can mean driving
windshield wiper inserts when they show
trouble. On a wet road you can’tstop,
signs of streakingor missing areas onthe
accelerate or turn as well because your
windshield, or when strips of rubber start
tire-to-road traction isn’tas good as on
dry roads. And, if yourtires don’t have
to separate from the inserts.
much tread left, you’ll get evenless
Driving toofast through large water
traction. It’s always wise togo slower and puddles or even going through somejcar
be cautious if rain starts to fall while you washes can cause problems, too. The
we driving. The surface may get wet
water may affect yourbrakes, Try to
suddenly when your reflexes are tunedfor avoid puddles. But if you can’t,
try to
driving on dry pavement.
slow down before you hit them.
The heavier the rain, the harderit is to
see. Even if your windshield wiper blades
are in good shape,a heavy rain can make
it harder to see road signs and traffic
signals, pavement markings, the edge of
the road, and even people walking.
Driving in the Rain
107
...
Your Driving and the Road
Hydroplaning usually happens at higher
speeds. Therejust isn’t a hard and fast
rule about hydroplaning. The best advice
is to slow down when it is raining.
Hydropraning
Hydroplaning is dangerous.So much
water can buildup under your tires that
they can actually ride on the water. This
can happen if the roadis wet enough and
you’re going fast enough. When your
vehicle is hydroplaning, it haslittle or no
contact with the road.
Hydroplaning doesn’t happen often. But it
can if your tires haven’t much treador if
the pressure in one or more is low. It can
happen if a lot of water is standing on the
road. If you can see reflections from trees,
telephone poles,or other vehicles, and
raindrops “dimple” the water’ssurface,
there could be hydroplaning.
. . .IO8
Some Other Rainy Weather Tips
Turn on your low-beam headlightsnot just your parking lights- to help
make you more visible to others.
Besides slowing down, allow some
extra following distance.And be
especially careful when you pass
another vehicle. Allow yourself more
clear room ahead, and be preparedto
have your view restrictedby road
spray.
Have good tireswith proper tread
depth. (See “Tires’’ in the Index.)
City Driving
One of the biggest problems with city
streets is the amount of traffic on them.
You’ll want to watch out for what the
other drivers are doing and pay attention
to traffic signals.
Here are ways to increase your safetyin
city driving:
Know the best way to get to where
you are going. Get a city map and plan
your trip into an unknown part of the
city just as you would for a
cross-country trip.
Try to use the freeways that rim and
crisscross most large cities. You’ll
save time and energy. (See the next
section, “Freeway Driving.”)
Treat a green light asa warning signal.
A traffic light is there because the
corner is busy enough to need it.
When a light turns green, and just
before you start to move, check both
ways for vehicles that have not
cleared the intersectionor may be
running the red light.
begin to check traffic. Tryto determine
where you expect to blend with the flow.
Try to merge into the gap atclose to the
prevailing speed. Switch on your turn
signal, check your mirrors and glance
over your shoulder as often as necessary.
Try to blend smoothly with the traffic
flow.
Once you are on the freeway, adjust
your speed to the posted limit
or to the
prevailing rate if it’s slower. Stayin the
right lane unlessyou want to pass.
Freeway Driving
Before changing lanes, check your
mirrors. Then use yourturn signal.
Mile for mile, freeways (also called
thruways, parkways, expressways,
Just before you leave the lane, glance
turnpikes, or superhighways) are the
quickly over your shoulderto make sure
safest of all roads. Butthey have their
there isn’t another vehicle in your “blind”
own special rules.
spot.
The most important advice on freeway
Once you are moving on the freeway,
driving is: Keep up with traffic and keep make certain you allowa reasonable
to the right. Drive atthe same speed most following distance. Expectto move
of the other drivers are driving. Too-fast
slightly slower at night.
or too-slow driving breaks a smooth
When you want to leave the freeway,
traffic flow. Treat the left laneon a
move to the proper lane wellin advance.
freeway as a passing lane.
If you miss your exitdo not, under any
At the entrance there is usually a ramp
circumstances, stop and back up. Drive
that leads to the freeway. If you have a
on to the next exit.
clear view of the freeway as you drive
along the entrance ramp, you should
109
...
Your Driving and the Road
Wiper Blades:Are they in good
shape?
, 0 Fuel, Engine Oil, Other Fluids:
Have you checked all levels?
0 Lights: Are they all working? Arethe
lenses clean?
0 Tires: They are vitally important toa
safe, trouble-free trip. Is the tread
Before leaving on a long Trip
good enough for long-distance
Make sure you’re ready.Try to be well
driving? Are the tires all inflated to
rested. If you must start when you’re not
the recommended pressure?
fresh - such as after a day’s workWeather Forecasts: What’s the
don’t planto make too many miles that
weather outlook along your route?
first part of the journey. Wear comfortable
Should you delay yourtrip a short
clothing and shoes you can easilydrive
time to avoid a major storm system?
in.
Maps: Do you have up-to-date maps?
Is your vehicle readyfor a long trip? If
you keep it serviced and maintained, it’s Highway Hypnosis
ready to go. If it needs service, haveit
Is there actually such a condition as
done before starting out.Of course, you’ll
“highway hypnosis”?Or is itjust plain
find experienced andable service experts
falling asleep at the wheel? Callit
in Geo dealerships all across North
highway hypnosis, lackof awareness, or
America. They’ll be ready and willing to
whatever.
help if you need it.
There is something about an easy stretch
Here are some thingsyou can check
of road with the same scenery, along with
before a trip:
the hum of the tires on the road, the drone
0 Windshield Washer Fluid: Is the
of the engine, and the rushof the wind
reservoir full? Are all windows clean against the vehicle that canmake you
inside and outside?
sleepy. Don’t let it happen to you!If it
The exit ramp can be curved, sometimes
quite sharply. The exit speed is usually
posted. Reduce your speed according
to
your speedometer, notto your sense of
motion. After drivingfor any distance at
higher speeds,you may tend to think you
are going slower thanyou actually are.
.. I 1 0
does, your vehicle canleave the road in
1
and you could crash
and be injured.
What can you do about highway
hypnosis? First, be aware thatit can
happen.
Then here are some tips:
0 Make sure your vehicleis well
ventilated, with a comfortably cool
interior.
0 Keep your eyes moving. Scan the road
ahead and to the sides. Check your
rearview mirrors and your instruments
frequently.
0 If you get sleepy, pulloff the road into
a rest, service, or parking area and
take a nap, get some exercise,or both.
For safety, treat drowsiness on
the
highway as an emergency.
down. Shift to a lower gear when you
go down a steep or long hill.
Hill and Mountain
Roads
Driving on steep hills or mountains is
different from driving in flat or rolling
terrain. If you drive regularly in steep
country, or if you’re planning to visit
there, here are some tips that can make
your trips safer and more enjoyable.
0 Keep your vehicle in good shape.
Check all fluid levels and also the
brakes, tires, cooling system and
transaxle. These parts can work hard
on mountain roads.
0 Know how to go down hills. The most
important thing to know is this: let
your engine do some of the slowing
e Know how to go uphill. You may
want to shift down to a lower gear.
The lower gears help cool your engine
and transaxle, and you can climb the
hill better.
0 Stay in your own lane when driving
on two-lane roads in hillsor
mountains. Don’t swing wideor cut
across the center of the road. Driveat
speeds that let you stay in yourown
lane.
0 As you go over the top of a hill, be
alert, There could be something in
your lane, likea stalled car or an
accident.
e You may see highway signs on
mountains thatwarn of special
problems. Examples are long grades,
passing or no-passing zones, a falling
rocks area, or winding roads. Be alert
to these and take appropriate action.
111
...
~~
Your Driving andthe Road
...
i
:
Winter Driving
Here are some tipsfor winter driving:
Have your Geo in good shapefor
winter. Be sure your engine coolant
mix is correct.
You may want to put winter
emergency supplies in your trunk.
. ..I12
Include an ice scraper,a small brush or
broom, a supply of windshield washer
fluid, a rag, some winter outer clothing,a
small shovel, a flashlight, a red cloth, and
a couple of reflective warning triangles.
And, if you will be driving under severe
conditions, includea small bag of sand, a
piece of old carpetor a couple of burlap
bags to help provide traction. Be sure you
properly secure these itemsin your
vehicle.
Driving on Snow or Ice
Most of the time, those places where your
tires meet the road probably have good
traction.
However, if there is snow orice between
your tires and the road,you can have a
very slippery situation. You’ll havea lot
less traction or “grip”and will need to be
very careful.
What’s the worst timefor this? “Wet ice.”
Very cold snow or ice canbe slick and
hard to driveon. But wet ice can be even
more trouble becauseit may offer the
least tractionof all. You can get “wetice”
when it’s about freezing(32°F; OOC) and
freezing rain beginsto fall. Try to avoid
driving on wet ice until salt and sand
crews can get there.
Whatever the condition - smooth ice,
packed, blowing or loose snow - drive
with caution.
Accelerate gently. Try not to break the
fragile traction. If you accelerate too fast,
the drive wheels will spin and polishthe
surface under the tires even more.
Unless you have the anti-lock braking
system, you’ll wantto brake very gently,
too. (If you do have anti-lock, see
“Anti-Lock” in the Index. This system
improves your vehicle’sability to make a
hard stop on a slippery road.) Whether
you have the anti-lock braking system or
not, you’ll want to begin stopping sooner
than you would ondry pavement. Without
anti-lock brakes, if you feel your vehicle
begin to slide, let up on the brakes a little.
Push the brake pedal down steadilyto get
the most traction you can.
Remember, unless you have anti-lock, if
you brake so hard that your wheels stop
rolling, you’ll just slide. Brake so your
wheels always keep rolling and you can
still steer.
Whatever your braking system, allow
greater following distance on any
slippery road.
Watch for slippery spots. The road
might be fine until you. hit a spot that’
covered with ice.On an otherwise
clear road, ice patches may appear in
shaded areas wherethe sun can’t
reach: around clumpsof trees, behind
buildings, or under bridges.
Sometimes the surface of a curve or
an overpass may remain icy when the
surrounding roads are clear. If you see
a patch of ice ahead of you, brake
before you are onit. Try not to brake
while you’re actuallyon the ice, and If You’re Caught in a Blizzard
avoid sudden steering maneuvers.
If you are stopped by heavy snow, you
could be in a serious situation.You should
probably stay with your vehicle unless
you know for sure that youare near help
and you can hike throughthe snow. Here
are some thingsto do to summon help and
keep yourself and your passengers safe:
Turn on your hazardflashers. Tie a red
cloth to your vehicleto alert police that
on
you’ve been stopped by the snow. Put
2xtra clothing or wrap a blanket around
you. If you have no blankets or extra
:lothing, make body insulators from
lewspapers, burlap bags, rags,floor mats
- anything you can wrap around yourself
)r tuck under your clothing
to keep warm.
You can run the engine to keep warm, but
)e careful.
113..
.
Your Driving and the Road
Run your engine only as long asyou
must. This saves fuel. When you run the
Zngine, make it goa little faster than just
idle. That is, push the accelerator slightly.
This uses less fuel for the heat thatyou
get and it keeps the battery charged.You
will need a well-charged battery to restart
the vehicle, and possiblyfor signaling
later on with your headlights. Let the
heater run for awhile.
Then, shut the engine off and close the
window almost allthe way to preserve the
heat. Start the engine again and repeat this
only when you feel really uncomfortable
from the cold. Butdo it as little as
possible. Preserve the fuelas long as you
can. To help keep warrn, you can get out
of the vehicle anddo some fairly vigorous
exercises everyhalf hour or so until help
comes.
Towing a Trailer
NOTICE:
Pulling a trailer improperly can damage your vehicle and result in costly
repairs not covered by your warranty.
To pull a trailer correctly, follow the
advice in this section, andsee your
Geo dealerfor important information
about towing a trailer with your
vehicle.
... I 1 4
Your vehicle can tow a trailer. To identify If You Do Decide toPull a Trailer
what the vehicle trailering capacity is for If you do, here are someimportant points.
your vehicle, you should read the
There are many different laws,
information in “Weight of the Trailer” that
including speed limit restrictions,
appears later in this section. But trailering
having
to do with trailering. Make
is different than just driving your vehicle
sure your rig will be legal, not only
by itself. Trailering means changes in
where
you live but also where you’ll
handling, durability, and fuel economy.
be driving. A good source for this
Successful, safe trailering takes correct
information
can bestate or provincial
equipment, and it has to be used properly.
police.
That’s the reason for this section. In it are
Consider using a sway control. You
many time-tested, important trailering tips
can
ask a hitch dealer about sway
and safety rules. Many of these are
controls.
important for your safety and thatof your
Don’t tow a trailer at allduring the
passengers. So please read this section
first 1,000 miles ( 1 600 km) your new
carefully before you pull a trailer.
vehicle is driven. Your engine, axle or
Load-pulling components such as the
other parts could be damaged.
engine, transaxle, wheel assemblies, and
Then, during the first 500 miles
tires are forced to work harder againstthe
(800 km) that you tow a trailer, don’t
drag of the added weight. The engine is
drive over 50 mph (80 kmh) and
required to operate at relatively higher
don’t make starts at full throttle.This
speeds and under greater loads,
helps your engine and other parts of
generating extra heat. What’s more, the
your
vehicle wearin at the heavier
trailer adds considerably to wind
loads.
resistance, increasing the pulling
requirements.
Three important considerations have to do
with weight:
Weight of the Trailer
How heavy can a trailer safely be?
It should never weigh more than 1,500
pounds (680 kg). But even that can be
too heavy.
It depends on how you plan to use your
rig. For example, speed, altitude, road
grades, outside temperature and how
much your vehicle is usedto pull a trailer
are all important. And, it canalso depend
on any special equipment that you have
on your vehicle.
You can ask yourdealer for our trailering
information or advice, or you can write us
at:
Customer Assistance Department
Chevrolet/Geo
P.O. Box 7047
Troy, MI 48007-7047
In Canada, write to:
General Motors of Canada Limited
Customer Assistance Center
1908 Colonel Sam Drive
Oshawa, Ontario L 1 H 8P7
115
...
Your Driving and the Road
trailer tongue (A) should weight 12%of
the total loaded trailer weight(B).
After you’ve loaded your trailer, weigh
the trailer and then the tongue, separately,
to see if the weights are proper.If they
aren’t, you may be able to get them right
simply by moving some items around in
the trailer.
1
A
B
Total Weight on Your Vehicle’s Tires
Be sure your vehicle’s tiresare inflated to
the limit for cold tires. You’ll find these
VVeight of the Trailer Tongue
numbers on the Certification label at the
rear of the driver’s door opening or
see
’he tongue load(A) of any trailer is an
in
the
Index.
“Loading
Your
Vehicle”
irnportant weight to measure becauseit
Then be sure you don’t go over theGVW
of your
affects the total capacity weight
Vehicle. The capacity weight includes the limit for your vehicle.
Curb weight of the vehicle, any cargoyou
Hitches
nlay carry in it, and the people who will
be riding in the vehicle. Andif you will
It’s important to have the correct hitch
tcIW a trailer, you must subtract the tongut equipment. Crosswinds, large trucks
lad from your vehicle’s capacity weight going by, and rough roads are a few
bvecause your vehicle will be carrying thal reasons why you’ll need the right hitch.
P(eight, too. See “Loading Your Vehicle”
Here are some rules to follow:
n the Index for more information about 0 Will you have to make any holes in
Y our vehicle’s maximum load capacity.
the body of your vehicle when you
I:f you’re using a “dead-weight” hitch,the
install a trailer hitch? If you do, then
tlrailer tongue (A) should weigh 10%of
be sure to seal the holes laterwhen
tlhe total loaded trailer weight(B). If you
you remove the hitch. If you don’t
hlave a “weight-distributing” hitch, the
. .116
0
seal them, deadly carbon monoxide
(CO)from your exhaustcan get into
your vehicle (see “Carbon Monoxide”
in the Index). Dirt and water can, too.
The bumpers on your vehicle arenot
intended for hitches. Do not attach
rental hitches or other bumper-type
hitches to them. Use onlya
frame-mounted hitch that doesnot
attach to the bumper.
Safety Chains
You should always attach chains between
your vehicle and your trailer. Cross the
safety chains under the tongue
of the
trailer so that the tongue will not drop to
the road if it becomes separated from the
hitch. Instructions about safety chains
may be provided by the hitch
manufacturer or by the trailer
manufacturer. Follow the manufacturer’s
recommendation for attaching safety
chains. Always leavejust enough slack so
you can turn with your rig. And, never
allow safety chains to drag on the ground.
Trailer Brakes
Does your trailer haveits own brakes? Be
sure to readand follow the instructions
for the trailer brakesso you’ll be able to
’
install, adjust and maintain them properly.
If your vehicle hasanti-lock brakes, don’t
try to tap into your vehicle’s brake
system. If you do, both brake systems
won’t work wellor at all.
Even if your vehicle doesn’t have
anti-lock brakes, don’t tap into your
vehicle’s brake systemif the trailer’s
brake system will use more than
0.02
cubic inch (0.3 cc) of fluid from your
vehicle’s master cylinder.If it does, both
braking systems won’t work well.You
could even lose your brakes.
Will the trailer brake parts take
3,000 psi (20 650 kPa) of pressure? If
not, the trailer brake system must not
be used with your vehicle.
If everything checks out this far, then
make the brakefluid tap at the upper
rear master cylinder port. But don’t
use copper tubingfor this. If you do, it
will bend and finally break off. Use
steel brake tubing.
of handling and braking with the added
weight of the trailer. Andalways keep in
mind that the vehicle you are driving is
now a good deal longer and not nearly
as responsive as your vehicleis by itself.
Before you start, check the trailer hitch
and platform, safety chains, electrical
connector, lights, tires and mirror
adjustment. If the trailer has electric
brakes, start your vehicle and trailer
moving and then apply the trailer brake
controller by hand to be sure the brakes
are working. This lets you check your
electrical connection at the same time.
During your trip, check occasionally to
be sure that the load is secure, and that
the lights and any trailer brakes are still
working.
Following Distance
Stay at least twice as
far behind the
vehicle ahead as you wouldwhen driving
your vehicle withouta trailer. This can
help you avoid situations that require
heavy braking and sudden turns.
Driving with a Trailer
Towing a trailer requires a certain amount
Passing
of experience. Before setting out for the
You’ll need more passing distance up
open road, you’ll wantto get to know
your rig. Acquaint yourself with thefeel
ahead when you’re towinga trailer. And,
because you’re a good deal longer, you’ll
need to go much farther beyondthe
passed vehicle beforeyou can return to
your lane.
Backing Up
Hold the bottomof the steering wheel
with one hand. Then, to move the trailer
to the left, just move that hand to theleft.
To move the trailer to theright, move
your hand to the right. Alwaysback up
slowly and, if possible, have someone
guide you.
Making Turns
When you’re turning witha trailer, make
wider turns than normal. Dothis so your
trailer won’t strike soft shoulders, curbs,
road signs, trees, or otherobjects. Avoid
jerky or sudden maneuvers. Signal well in
advance.
n r n Signals When Towing a Trailer
When you tow a trailer, your vehicle has
to have a different turn signal flasher and
extra wiring. The green arrows on your
instrument panel willflash whenever you
signal a turn or lane change. Properly
hooked up, the trailer lights willalso
117..
.
Your Driving andthe Road
lash, telling other drivers you’re about
to
;urn, change lanesor stop.
When towing a trailer, the green arrows
m your instrument panel will flash
for
;urns even if the bulbs on
the trailer are
burned out. Thus, you maythink drivers
behind you are seeing yoursignal when
they are not. It’s importantto check
occasionally to be sure the trailer bulbs
are still working.
se fifth gear. Justdrive in fourth gear (or, When You Are Ready to Leave after
s you need to, a lower gear).
?arking ona Hill
I. Apply your regular brakes and hold
’arking on Hills
the pedal down while you:
lou really should not park your vehicle,
Start your engine;
vith a trailer attached,on a hill. If
0 Shift into a gear; and
omething goes wrong, your rig could
0 Release the parking brake.
tart to move. People canbe injured, and
loth your vehicle and the trailer can
be
2. Let up onthe brake pedal.
lamaged.
3. Drive slowly until the trailer is clear
3ut if you ever have to park your rig aon
of the chocks.
Drivirig on Grades
d l , here’s how to do it:
4. Stop and have someone pick up and
Reduce speed and shiftto a lower gear
I. Apply your regular brakes, but don’t
store the chocks.
before you start downa long or steep
shift into “P” (Park) yet,or into gear
downgrade. If you don’t shift down, you
for a manual transaxle.
Maintenance When Trailer Towing
might have to use your brakesso much
2. Have someone place chocks under the Your vehicle will need service more often
that they would get hot and no longer
trailer wheels.
when you’re pullinga trailer. See the
work well.
Maintenance Schedulefor more on this.
On a long uphill grade, shift down and 3. When the wheel chocks arein place,
Things
that are especially important
in
release
the
regular
brakes
until
the
reduce your speedto 45 mph (70 km/h) to
trailer
operation
are
automatic
transaxle
chocks absorb the load.
reduce the possibilityof engine and
fluid (don’toverfill), engine oil, belts,
4. Reapply the regular brakes. Then
transaxle overheating.
cooling
system, and brake adjustment.
apply your parking brake, and then
If you are towinga trailer ‘that weighs
Each of these is covered inthis manual,
shift to “P’
(Park), or“R” (Reverse)
more than 1,000pounds (450 kg), and
and the Index will help you fmd them
for a manual transaxle.
you have an automatic transaxle with
quickly. If you’re trailering, it’s a good
Overdrive, you may preferto drive in “D’ 5. Release the regular brakes.
idea to review these sections before you
instead of Overdi-ive (or, as you needto, a
start ywr trip.
lower gear). Or,if you have a manual
Check periodically to see that all hitch
transaxle with fifth gear, it’s
better not to
nuts and bolts are tight.
.. .118
.
H e r e you^ find what to do
about some problems that can
occur on the road.
Part 5
Problems on the Road
Hazard Warning Flashers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
120
Jump Starting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
121
TowingYourVehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
124
Engine Overheating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
128
If a Tire Goes Flat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
134
If You’re Stuck: In Sand. Mud. Ice or Snow . . . . . . . . . . . . . . . . . . . . . . . . . . 141
119
I
..
Problems on the Road
‘I
L
’
..
X6005
Hazard Warning
Flashers
Your hazard warning flashers letyou
warn others. They alsolet police know
you have a problem. Your front and rear
turn signal lights will flash on and off.
.. .120
Press the button to make your front and
rear turn signal lights flash on andoff.
Your hazard warning flashers work no
matter what position your keyis in, and
even if the key isn’t in.
To turn off the flashers, push the button
again.
When the hazard warning flashers are on,
your turn signals won’t work.
Other Warning Devices
If you carry reflective triangles, you can
set oneup at the sideof the road about
300 feet (100 m) behind your vehicle.
Jump Starting
NOTICE:
;:g? :y&*-$
.
If your battery has run down, you
may
want to use another vehicle and some
jumper cables to start your Geo. But
please follow the steps below to do it
safely.
I
I<
.
,~”:
7.
.;s$.,“‘;..;
,.’*.. ..
:...
,.
,.
2. Get the vehicles close enough so the
jumper cables can reach, but be sure
the vehicles aren’t touchingeach
other. If they are, it could cause a
ground connection you don’t want.
You wouldn’t be able to start your
Geo, and the bad grounding could
damage the electrical systems.
3. Turn off the ignition on both vehicles.
Turn off all lights that aren’t needed,
and radios. This will avoid sparks and
help save both batteries. And it could
save your radio!
,
y
,
Ignoring these steps could resuitin
costly damage to your vehicle that
wouldn’t be covered by your warranty.
Trying to start your Geo by pushing
or pulling it could damage your
vehicle, even if you havea manual
transaxle. And if you have an automatic transaxle, it won’t start that
way.
I NOTICE:
I
NOTICE:
To Jump Start Your Geo:
1. Check the other vehicle.It must have
a 12-volt battery with a negative
ground system.
I
I
If you leave yourradio on, it could be
badly damaged. The repairs wouldn’t
be covered by your
warranty.
If the other system isn’ta 12-volt
system with a negative ground, both
vehicles can be damaged.
121
...
Problems on the Road
4. Open the hoods and locate the
batteries. Find the positive (+) and
negative (-) terminals on each battery.
.. .I22
5. Check that the jumper cables don’t
have loose or missing insulation.If
they do, you could get a shock. The
vehicles could be damaged, too.
Before you connect the cables, here
are some thingsyou should know.
Positive (+) will go to positive(+) and
negative (-) will go to negative (-) or
a metal engine part. Don’t connect (+)
to (-) or you’ll get a short that would
damage the battery and maybe other
parts, too.
6. Connect the red positive (+) cable to
7. Don’t let the other end touch metal.
the positive (+) terminal of the vehicle
Connect it to the positive (+) terminal
with the dead battery. Use a remote
of the good battery. Usea remote
positive (+) terminal if the vehicle has
positive (+) terminal if the vehicle
one.
has one.
8. Now connect the black negative (-)
cable to the good battery’s
negative (-) terminal. Don’t let the
other end touch anythinguntil the next
step.
The other end of the negative cable
doesn’t go to the dead battery. It goes
to a heavy unpainted metal parton the
engine of the vehicle with the dead
battery.
123
...
Problems on the Road
1
- +
,
B
-
,
9.
Attach the cable at least 18 inches
(45 cm) away from the dead battery,
but not near engine parts that move.
The electrical connection is justas
good there, butthe chance of sparks
getting back tothe battery is much
less.
10. Now start the vehicle with the good
battery and runthe engine for a
while.
11. Try to start the vehicle with the dead
battery. If it won’t startafter a few
tries, it probably needs service.
... I 2 4
m
+.c
c T --
v
-
12. Remove the cables in reverse order
Towing Your Vehicle
to prevent electrical shorting. Take
care that they don’t touch each other Try to have a GM dealer or a professional
towing service tow your Geo. The usual
or any other metal.
towing
equipment isa sling-type (A) or a
A. Heavy Metal Engine Part
wheel-lift (B) or car carrier (C) tow truck.
6. Good Battery
If your vehicle has been changed
or
C. Dead Battery
modified since it was factory-new by
adding aftermarket items likefog lamps,
aero skirting, or special tires and wheels,
these instructions and illustrationsmay
not be correct.
Before you do anything, turn on the
hazard warning flashers.
When you call, tell the towing service:
That your vehicle cannot be towed
from the frontor rear with sling-type
equipment.
That your vehicle has front wheel
drive.
The make, model, and year of your
vehicle.
Whether you can still move the shift
lever.
If there was an accident, what was
damaged.
When the towing service arrives, let the
tow operator know that this manual
contains detailed towinginstructions and
illustrations. The operator may wantto
see them.
0
When your vehicleis being towed, have
the ignition key off. The steering wheel
should be clamped ina straight-ahead
position, with a clamping device designed
for towing service. Donot use the
vehicle’s steering column lockfor this.
The transaxle shouldbe in “Neutral” and
the parkingbrake released.
Don’t have your vehicle towed with the
front wheels in contact withthe ground if
it has an automatic transaxle.If a vehicle
with an automatic transaxle mustbe
towed from the rear with wheellift
equipment, the front wheels must be
supported ona dolly.
If your vehicle hasa manual transaxle,
don’t have it towed on the front wheels
unless you must.If a vehicle witha
manual transaxle mustbe towed on the
front wheels, don’t go more than35 mph
(56 kmk)or farther than 50 miles
(80 km) or your transaxle willbe
damaged. If these limits must be
exceeded, then the front wheels have to
be supported on a dolly. If you have a
manual transaxle anddollies won’t be
used, turn the ignition key to the “ACC”
position and putthe transaxle in
“Neutral.”
125
...
Problems on the Road
,
Front Towing Hook-Ups
Attach T-hook chainsto slots in frame
brackets just aheadof the front wheelsor
both sides.
.. .126
"-
NOTICE:
Do not tow with sling-type equipment or fascia damage will occur.
Use wheel liftor car carrier equipment. Additional ramping may be
required for car carrier equipment.
Use safety chains and wheel straps.
A
c
Attach a separate safety chain around the
outboard end of each lower control arm.
:ear Towing Hook-Ups
Lttach T-hook chains to slots in the
ottom of the floor panjust ahead of the
:
a
rwheels on both sides.
NOTICE:
Do not tow with sling-type equipment or rear bumper valance will be
damaged.
Use wheel liftor car carrier equipment. Additional ramping may be
required for car carrier equipment.
Use safety chains and wheel straps.
Dollies are required underthe front
wheels or damage will occur.
127 ...
Problems on the Road
Engine Overheating
You will find a coolant temperature gage
on
or the warning light about a hot engine
vour Geo instrument panel.
[f Steam
ttach a separate safety chain around the
Itboard end of each lower controlarm.
.. .I28
Is Coming from Your Engine:
tf you no longer have the overheat
warning, you can drive. Justto be safe,
drive slower for about ten minutes.If the
If your enginecatches fire because
warning doesn’t come back on, you can
you keep driving with no coolant,
drive normally.
your vehicle can be badly damaged.
[f the warning continues, pull over, stop,
The costlyrepairs would not be
and park your vehicle right away.
covered by your warranty.
If there’s still no sign of steam, you can
idle the enginefor two or three minutes
If No Steam Is Coming from Your
while you’re parked,to see if the warning
Engine:
stops. But then,if you still have the
If you get the overheat warning butsee or warning, TURNOFF THE ENGINE
AND GET EVERYONE OUTOF THE
hear no steam, the problemmay not be
too serious. Sometimes theengine can get VEHICLE until it cools down.
a little too hot when you:
You may decide notto lift the hood but to
get service help right away.
0 Climb a long hill on a hot day.
0 Stop after high speed driving.
0 Idle for long periods in traffic.
0 Tow a trailer.
If you get @e overheat warning with no
sign of steam, try this for a minute or so:
1. If you have an air conditioner, turn it
NOTICE:
Cooling System
When you decide it’s safe to lift the hood,
here’s what you’ll see:
1. Coolant Recovery Tank
2. Radiator Pressure Cap
3. Electric Engine Fan
Off.
2. Turn on your heater tofull hot at the
highest fan speed and openthe
window as necessary.
129
...
Problems on the Road
How to Add Coolant to the Coolant
Recovery Tank
If you haven’t found a problem yet, but
the coolant level isn’t at or above the
“FULL” mark add a 50/50 mixture of
clean water (preferably distilled) and a
proper antifreeze at the coolant recovery
tank. (See “Engine Coolant” in the Index
for more information about the proper
coolant mix.)
If the coolant inside the coolant recovery
tank is boiling, don’t do anything else
until it cools down.
The coolant level should be ator above
“FULL.” If it isn’t, you may have a leak
in the radiator hoses, heater hoses,
radiator, water pumpor somewhere else
in the cooling system.
Engine damage from running your
engine without coolant isn’t covered
by your warranty.
If there seems to be no leak, check to see
if the electric engine fan is running.
If the
engine is overheating, the fan shouldbe
running. If it isn’t, your vehicle needs
service.
. . ,130
I NOTICE:
I
In cold weather, water can freeze
and crack the engine, radiator,
heater core and other parts. Use the
recommended coolant.
When the coolant inthe coolant recovery
tank is at or above the “FULL” mark start
your vehicle.
If the overheat warning continues, there’s
one more thing you can try.You can add
the proper coolant mix directly to the
radiator, but be sure the cooling system
is cool before you do it.
131 . .
Problems on the Road
1 How to Add Coolant tothe Radiator
1. You can remove the radiator pressure
cap when the cooling system,
including the radiator pressure cap and
upper radiator hose, is no longer hot.
Turn the pressure cap slowly to the
left until it first stops. (Don’t press
down while turning the pressure cap.)
If you hear a hiss, wait for that to stop.
A hiss means there is still some
pressure left.
. . .I32
2. Then keep turning the pressure cap,
but now push down as you turn it.
Remove the pressure cap.
3. Fill the radiator with the proper mix,
up to the baseof the filler neck.
4. Then fill the coolant recovery tank to
“FULL.”
5. Put the cap back on the coolant
recovery tank, but leave the radiator
pressure cap off.
6.
0
Start the engine and let run
it until
you can feel the upper radiator hose
getting hot. Watch out for the engine
fan.
By this time, the coolant level inside
the radiator filler neckmay be lower.
If the level is lower, add moreof the
proper mix through the filler neck
until the level reaches the baseof the
filler neck.
133 ...
Problems on the Road
If a Tire Goes Flat
Changing a Flat Tire
It’s unusual for a tire to “blow out” while If a tire goes flat, avoid furthertire
you’re driving, especiallyif you maintain damage by driving slowlyto a level place.
Turn on your hazard warning flashers.
your tires properly. If air goes outof a
tire, it’s much more likelyto leak out
slowly. But if you should ever have a
“blowout,” here area few tips about what
to expect and whatto do:
If a front tire fails, the flat tire will create
a drag that pulls the vehicle toward that
side. Take your foot off the accelerator
7. Then replace the pressure cap.At any pedal and grip the steering wheel firmly.
time duringthis procedure if coolant
Steer to maintain lane position, then
begins to flow out of the filler neck,
gently brake to a stop well outof the
reinstall the pressure cap. Be sure
the traffic lane.
arrows on the pressurecap line up like
A rear blowout, particularly ona curve,
this.
acts much likea skid and may require the
same correction you’d use in
a skid. In
any rear blowout, remove your foot from
the accelerator pedal. Getthe vehicle
under controlby steering theway you
want the vehicle to go.It may be very
bumpy and noisy, but you can still steer.
Gently brake toa stop, well off the roadif
possible.
If a tire goes flat, the next section shows
how to use yourjacking equipment to
change a flat tire safely.
. . .134
IW
to
135
...
Problems on the Road
Remove the jack handle (A), wheel
wrench (B) and jack (C) from the trunk.
The jack is under a cover on the right sidc
of the trunk. Remove the cover, thenturn
the jackscrew to remove the
jack from thc
clamps.
. . .136
ittach the jack handle to the jack. Turn
he jack handle to the right to raise the
lift
lead.
If you have a wheel cover, removeit
using the flat end of the wheel wrench.
Pry along the edgeof the wheel cover
until it comes off. Be careful; the rim
edges may be sharp. Don’t try to remove
it with your bare hands.
If you have a center cap on your wheels,
insert the flat end of the wheel wrench
into the slot in the cap. Pry the cap off.
Using the wheel wrench, loosen all the
wheel nuts. Don’t remove them yet.
Under the vehicle near each wheel, there
are bosses in the vehicle’s rocker flange.
Position thejack and raise thejack lift
head until it fits firmly into the notches
closest to theflat tire.
The jack head groove fits the rocker
flange forward of the boss in the front;
rearward of the boss in the rear.
137 ...
I
-
Problems on the Road
NOTICE:
Remove all the wheel nuts and take off
the flat tire.
Raising your vehicle with the
jack
improperly positioned will damage
the vehicle ormay allow the vehicle
to fall off the jack. Be sureto fit the
jack lift head into the proper location
before raising your vehicle.
Raise the vehicleby rotating thejack
handle clockwise. Raise the vehicle far
enough off the ground so there is enough
room for the spare tire tofit.
Remove any rustor dirt from the wheel
bolts, mounting surfaces and spare wheel.
Place the spare on the wheel mounting
surface.
... I 3 8
Lower the vehicle by turning thejack
handle counterclockwise. Lower thejack
completely.
Tighten the wheel nuts firmly in a
criss-cross sequence as shown.
!eplace the wheel nuts with the rounded
nd of the nuts toward the wheel. Tighten
ach nut by hand until the wheel is held
gainst the hub.
139
...
Problems on the Road
Don’t try to put a wheel cover on your
compact spare tire. It won’tfit. Store
the wheel cover in thetrunk until you
have the flat tire repaired or replaced.
Wheel covers won’tfit on your
compact spare.If you try to put a
wheel cover on your compact spare,
you could damage thecover or the
spare.
3
1. Jack
2. Spare Tire
3. ToolBag
4. JackHandle
Replace thejack, jack handle, wheel
wrench and flat tire. Make sure the tool
bag is stored securely under the tireto
help prevent rattles.
.I40
Compact Spare Tire
NOTICE:
Although the compact spare was fully
inflated when your vehicle wasnew,
Don’t take your compact spare
it can loseair after a time. Checkthe
through an automatic car wash with
inflation pressure regularly.It should be
guide rails. The compact spare can
60 psi (420 kPa). After installing the
get caught on the rails. That can
compact spare on your vehicle, you
damage the tire and wheel, and
should stop as soon as possible and make maybe other parts of your vehicle.
sure your spare tire is correctly inflated.
The compact spare is made to perform
Don’t use your compact spare on some
well at posted speed limitsfor distances
other vehicle.
up to 3,000 miles (5 000 km), so you can
And don’t mix your compact spareor
finish your trip and have yourfull-size
wheel with other wheelsor tires. They
tire repaired or replaced where you want.
won’t fit. Keep your spare andits wheel
Of course, it’s best to replace your
spare
together.
with a full-size tire as soon as you can.
Your spare will last longer andbe in
good shape in caseyou need it again.
NOTICE:
If You’re Stuck: In
Sand, Mud, Ice or
Snow
What you don’t want to do when your
vehicle is stuck is to spin your wheels.
The method known as “rocking” can help
you get out when you’re stuck, but you
must use caution.
Tire chains won’tfit your compact
spare. Using them will damage your
vehicle and destroy the chains too.
Don’t use tire chains on your
compact spare.
141
.
I
Problems on the Road
NOTICE:
Spinning your wheels can destroy
parts of your vehicle as well as the
tires. If you spin the wheels too fast
while shifting your transaxle back
and forth, you can destroy your
transaxle.
Rocking your vehicle to get it out:
First, turn your steering wheelleft and
right. That will clear the area aroundyour
front wheels. Then shift back and forth
between “R’ (Reverse) and a forward
gear (or witha manual transaxle, between
First or Second gear andReverse),
spinning the wheels aslittle as possible.
Release the accelerator pedal whileyou
shift, and press lightly on the accelerator
pedal when the transaxle isin gear. If tha
doesn’t get you out after a few tries, you
may need to be towed out. Or, you can
use your recovery hooks.If you do need
to be towed out, see “TowingYour
Vehicle” in the Index.
. .142
Using the Recovery Hooks
:f you ever get stuckin sand, mud, ice
NOTICE:
)r snow, your Prizm is equipped with
*ecovery hooks. The recovery hooks are
xovided at the front of your vehicle.
rhey can only be used for pulling your
Yrehicle out.
Never use the recovery hooksto
tow the vehicle. Your Prizm could be
damaged and it would not be covered
by warranty.
Service & Appearance Care
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
144
Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
145
Checking Things under the Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
147
HoodRelease . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
.... ...... ...
..
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Engine Oil . .
...
I
...cm
Aircleaner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Automatic Transaxle Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
154
Manual Transaxle Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
H e r e you will find information
HydraulicClutch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
156
about the careof your Geo. This
156
Enginecoolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
part begins with service and
fuel
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
158
Power
Steering
Fluid
information. and then it shows
159
Windshield Washer Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
how to check importantfluid and
160
Brake Master Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
lubricant levels. There is also
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
technical information about your BulbRepiacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
vehicle. and a section devoted
Loading
Vehicle
Your
.......
...
........
. . . . . . 169
to its appearance care.
170
Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appearancecare . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
Appearance Care Materials Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
181
182
Vehicle Identification Number (VTN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
182
Service Parts Identification Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Add-on Electrical Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
182
Fuses and Circuit Breakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183
ReplacementBulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
186
187
Capacities and Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-*I
143 ...
Service and Appearance Care
proper service manual, see “Service
Publications” in the Index.
Your vehicle has an air bag system.
Before attempting to do your own service
work, see “Servicing Your Air-Bag
Equipped Geo” in the Index.
You should keep a record with all parts
receipts and list the mileage and the date
D f any service work you perform. See
“Maintenance Record”in the Index.
Service
Your Geo dealer knows your vehicle best
and wants you to be happy with it. We
hope you’ll go to yourdealer for all your
service needs. You’ll get genuine GM
parts and GM-trained and supported
service people.
We hope you’ll want to keep yourGM
vehicle all GM. Genuine GM parts have
one of these marks.
Doing Your Own Service Work
If you want to do some of your own
service work, you’llwant to get the
proper Geo Service Manual.It tells you
much more about how to service your
Geo than this manualcan. To order the
.. .I44
NOTICE:
If you try to do your own service
work without knowing enough about
it, yourvehiclecouldbedamaged.
I
I
Fuel
Use regular unleaded gasoline rated at 87
octane or higher. It should meet
specifications ASTM D4814 in the U.S.
and CGSB 3.5-92 in Canada. These fuels
should have the proper additives, so you
should not have to addanything to the
fuel.
In the U.S. and Canada, it’s easy tobe
sure you get the right kind of gasoline
(unleaded). You’ll see “UNLEADED”
right on the pump. And only unleaded
nozzles will fit into your vehicle’s filler
neck.
Be sure the posted octane is at least 87. If
the octane is less than 87, you may get a
heavy knocking noise when youdrive. If
it’s bad enough, it can damage your
engine.
If you’re using fuel rated at87 octane or
higher and you still hear heavy knocking,
your engine needs service. But don’t
worry if you hear a little pinging noise
when you’re accelerating or driving up a
hill. That’s normal and you don’t have to
buy a higher octane fuel to get rid of
pinging. It’s the heavy, constant knock
that means you have a problem.
What about gasoline with blending
materials that contain oxygen
(oxygenates), such as MTBE or alcohol?
MTBE is “methyl tertiary-butyl ether.”
Fuel that is no more than15% MTBE is
fine for your vehicle.
Ethanol is ethyl or grain alcohol.
Properly-blended fuel that is no more
than 10%ethanol is fine for your vehicle.
Methanol is methyl or wood alcohol.
NOTICE:
Fuel that is more than5% methanol
is bad for your vehicle. Don’t use it.
It can corrode metal parts in your fuel
system and also damage plastic and
rubber parts. That damage wouldn’t
be covered under your warranty.And
even at 5% or less, there must be
“cosolvents” and corrosion preventers in this fuel to help avoid these
problems.
Gasolines for Cleaner Air
Your use of gasoline with deposit control
additives will help prevent deposits from
forming in your engine and fuel system.
That helps keep yourengine in tune and
your emission control system working
properly. It’s good for your vehicle, and
you’ll be doing your part for cleaner air.
Many gasolines are now blended with
oxygenates. General Motors recommends
that you use gasolines with these blending
materials, such as MTBE andethanol. By
doing so, you can help cleanthe air,
especially in those parts of the country
that have high carbon monoxide levels.
In addition, some gasoline suppliers are
now producing reformulated gasolines.
These gasolines are specially designed to
reduce vehicle emissions. General Motors
recommends that you use reformulated
gasoline. By doing so, you can help clean
the air, especially in those parts
of the
country that have highozone levels.
You should ask yourservice station
operators if their gasolines contain deposit
control additives and oxygenates, and if
they have been reformulated to reduce
vehicle emissions.
Fuels in Foreign Countries
If you plan on driving in another country
outside the US.or Canada, unleaded fuel
may be hard to find. Do not use leaded
gasoline. If you use evenone tankful,
145..
Service and Appearance Care
your emission controls won’t work well
I
or at all. With continuous use, spark plugs
can get fouled, the exhaust system can
corrode, and your engineoil can
deteriorate quickly. Your vehicle’s oxygen
sensor willbe damaged. All of that means
costly repairs that wouldn’tbe covered by
your warranty.
To check on fuel availability, askan auto
club, or contact a major oil company that
does business in the country where you’ll I
be driving.
Filling Your Tank
You can also write us at the following
address for advice. Justtell us where
you’re going and give your Vehicle
Identification Number(VIN).
General Motors Overseas Distribution
Corporation
North American Export Sales (NAES)
1908 Colonel Sam Drive
Oshawa, OntarioL1H 8P7
II
While refueling, hang the cap inside the
fuel door.
To take off the cap, turnit slowly to the
left (counterclockwise).
The release lever is near the
floor to the
left of the driver’s seat. The cap is behind
a hinged door on the left side
of your
vehicle.
.. .I46
k
Be careful not to spill gasoline, Clean
gasoline from painted surfaces as soon as
possible. See “Cleaningthe Outside of
Your Geo” in the Index.
When you put the cap back on, turn it to
the right until you hear at least
three
clicks.
NOTICE:
If you need a new cap, be sure to get
the right type. Your dealer can get
one foryou. If you get the wrong
type, it may not fit or have proper
venting, and yourfuel tank and emissions system mightbe damaged.
Checking Things under
the Hood
Then go to the front of the vehicle and
release the secondary hood release. The
release is on the right near the middleof
the hood.
Hood Release
I
To open the hood, first pull the release
handle inside the vehicle.
147
...
Service and Appearance Care
I
Lift the hood, releasethe hood prop from
its retainer and putthe hood prop into the
slot in the hood.
1
When you open the hood, on the 1.6L
(Code 6 ) engine without anti-lock
brakes you'll see:
1. Windshield Washer Reservoir
2. Oil Fill Cap
3. Engine Oil Dipstick
4. Power Steering Reservoir
5. Brake Fluid Reservoir
6. Air Cleaner
. ..148
7. Engine Compartment Fuses
8. Battery
9. Engine Coolant Reservoir
10. Hydraulic Clutch Fluid Reservoir
11. Engine Fan
12. Radiator Pressure Cap
II
Before closing the hood,be sure all the
filler caps are on properly.
.
When you open the hood, on the 1.8L
(Code 8) engine with anti-lock brakes
you’ll see:
1. Windshield Washer Reservoir
2. Oil Fill Cap
3. Engine Oil Dipstick
4. Power Steering Fluid Reservoir
5. Brake Fluid Reservoir
6. Air Cleaner
7.
8.
9.
10.
Engine Compartment Fuses
Battery
Engine Coolant Reservoir
Automatic Transaxle Dipstick
(if equipped)
11. Electric Engine Fan
12. Radiator Pressure Cap
149
...
Service and Appearance Care
Engine Oil
It’s a good idea to check your engine oil
level every time you getfuel. In order to
get an accurate reading,tile oil must be
warm and the vehicle must be on level
ground.
Turn off the engineand give the oil a few
minutes to drain backinto the oil pan. If
you don’t, theoil dipstick might not show
the actual level.
- - .150
When to Add Oil:
To Check Engine Oil
tf the oil isat or below the “L”, you’ll
Pull out the dipstick and clean it with
a
paper towel or cloth, then pushit back in need to add some oil. Butyou must use
all the way. Remove it again, keeping the the right kind. This section explains what
kind of oil touse. For crankcase capacity,
tip lower.
see “Capacities and Specifications” in the
Index.
~~
NOTICE:
Don’t add too much oil.If your
engine has so much oil that the oil
level gets above the upper mark that
shows the proper operating range,
your engine couldbe damaged.
Recommended SAE Viscosity
Grade Engine Oils
For best fuel economy and coldstarting,
select the lowest SAE viscosity grade oil
for the expected temperature range.
HOT
UEATHER
Just fill it enough to put the level
somewhere in the properoperating
range. Push the dipstick all the way back
in when you’re through.
What Kind of Oil to Use
Beginning midyear 1993,oils of the
proper quality for your vehicle will be
identified with this new “starburst”
symbol. The “starburst” symbol indicates
that the oil has been certified by the
American Petroleum Institute (API), and
is preferred for use in your gasoline
engine.
You should look for thison the front of
the oil container, and use& oils that
display this new symbol.
You should also use the proper viscosity
oil for your vehicle, as shownin the
following chart:
LOOK FOR
ONE OF THESE
LABELS
SAE 5W-30
COLD
NEATHER
151
...
Service and Appearance Care
As shown in the chart,SAE 1OW-30 is
best for your vehicle. However, you can
use SAE 5W-30 if it’s going to be colder
than 50°F (10°C) before your next oil
change. When it’s very cold, you should
use SAE 5W-30. These numbers on an oil
container show its viscosity,or thickness.
Do not use other viscosity oils, such as
SAE 1OW-40 or SAE 20W-50.
If you cannot find oils with the new
“starburst” symbol on the front
of the
container, you should look for and use
These three things are usually includedin
oils containing the following three things: a doughnut shaped logo (symbol) on mos
0 SHor SG
containers. If you cannot find oils with
the “starburst” symbol,you should look
“SH” or “SG’ must be on the oil
for
oils with the doughnut shaped symbol
container, eitherby itself or combined
with other quality designations, such containing the three things noted above.
as “SH/CD,” “SH,SG,CD,” “SG/CD,”
etc. These letters show American
NOTICE:
Petroleum Institute (API) levels of
quality.
If you use oils that do not have either
the “starburst” symbol or an API
SH
SAE 1OW-30
or SG designation, you can cause
0 EnergyConserving I1
engine damage not coveredby your
Oils with these words on the container warranty.
will help you save fuel.
GM Goodwrench@ oil (in Canada, GM
Engine Oil) meets all the requirements fo
your vehicle.
,,
I
.. .152
Engine Oil Additives
Don’t add anything to your oil.Your
Geo dealeris ready to advise if you think
something should be added.
When to ChangeEngine Oil
See if any one of these is true for you:
e Most trips are less than 4 miles
(6 km).
0 It’s below freezing outside and most
trips are less than10 miles (16 km).
e The engine is at low speed mostof the
time (as in door-to-door delivery,or
stop-and-go traffic).
You tow a trailer often.
0 Most trips are through dusty places.
If any one of these is true for your
vehicle, then you needto change yourQLI
and filter every 3,750 miles
(6 200 km)
or 6 months - whichever comes first.
If none of them is true, change oil and
filter every 7,500 miles (12 500 km) or
12 months- whichever comes first.
What to Do with UsedOil
Did you know that used engine oil
contains elements that may be unhealthy
for your skin and could even cause
cancer? Don’t let used oil stay on your
skin for very long. Clean your skin and
nails with soap and water, or a good hand
cleaner. Wash or properly throw away
clothing or rags containing used engine
oil. (See the manufacturer’s warnings
about the use and disposal of oil
products.)
Used oil can bea real threat to the
environment. If you change your own oil,
be sure to drain all free-flowing oil from
the filter before disposal. Don’t ever
dispose of oil by putting it in the trash,
pouring it on the ground,into sewers, or
into streams or bodies of water. Instead,
recycle it by taking it to a place that
collects used oil. If you have a problem
properly disposing of your used oil, ask
your dealer, a service station or a local
recycling center for help.
NOTICE:
If the air cleaner is off, a backfire can
cause a damaging engine fire. And,
dirt can easily get into your engine,
which will damage it. Always have
the air cleaner in place when you’re
driving.
Air CIeaner
Refer to the Maintenance Scheduleto
determine when to replace the air filter.
See “Scheduled Maintenance Services”in
the Index.
I
153 ...
Service and Appearance Care
Vait at least 30 minutes before checking
le transaxle fluid level if you have been
riving:
wllen to Check and Change
1 When outside temperaturesareabove
A i;ood time to check your automatic
90°F (32°C).
tralIsaxle fluid level is when the engine
oil is changed. Referto the Maintenance
At high speedfor quite a while.
Sclledule to determine when to change
In heavy traffic-especially in hot
YO‘ u. fluid. See “Scheduled Maintenance
weather.
Services” in the Index.
While pullinga trailer.
HaIW to Check
:o get the right reading,the fluid should
,e at normal operating temperature,
be a little
Belcause this operation can
vhich is 180°F to 200°F (82°C to 93°C).
dif ficult, you may choose to have this
dolne at your Geo dealershipService
jet the vehicle warmedup by driving
Deipartment.
lbout 15 miles (24 km) when outside
emperatures
areabove 50°F (10°C). If
If!you do it yourself, be sure to follow all
t’s colder than50°F (lO”C), you may
the instructions here, oryou could get a
lave to drive longer.
fa1se reading on the dipstick.
ro check thefluid level
B Park your vehicle on a level place.
NOTICE:
Keep the engine running.
Too much or toolittle fluid can
D With the parking brake applied, place
damage your transaxle.Too much
the shift lever in “P” (Park).
can mean thatsome of the fluid could
With your foot on the brake pedal,
come out andfall on hot engine parts
move the shift lever through each gear
or exhaust system parts, starting
a frre.
range, pausing for about three seconds
Be sure to get an accurate readingif
in each range. Then, position the shift
you check your transaxle fluid.
lever in“P” (Park).
Let the engine run at idle for three to
five minutes.
Abrtomatic Transaxle Fluid
I
iir Filter Replacement
To check or replace thefilter:
I. Release the four clips that hold the
cover down.
2. Lift the cover off.
3. Pull out the air filter.
I
I
.. .I54
How to Add Fluid
Manual Transaxle Fluid
Refer to the Maintenance Schedule to
How to Check:
determine what kind of transaxle fluid to
Because this operation canbe difficult,
use. See “Recommended Fluids and
you may choose to have this done at your
Lubricants” in the Index.
Geo dealership Service Department.
If the fluid level is low, add only enough
If you do it yourself, be sure to followall
of the proper fluidto bring the levelinto
the instructions here, or you could get
a
the area between dimples on the dipstick.
false reading.
1. Pull out the dipstick.
2. Using a long-neck funnel, add enough
NOTICE:
fluid at the dipstick hole to bringit to
the proper level.
Then, without shuttingoff the engine,
Too much or toolittle fluid can
follow these steps:
It doesn’t take much fluid, generally less
damage your transaxle.Too much
than a pint (0.5 L). Don’t overfill. We
can mean that some of the fluid could
1. Release the tab and pull outthe
recommend
you
use
only
fluid
labeled
dipstick and wipe it with a clean rag
come out andfall on hot engine parts
DEXRON@-111or DEXRON@-IIE,
or exhaust system parts, startinga
or paper towel.
because fluids with that label are made
fire. Be sure to getan accurate read2. Push it back in all the way, wait three
especially for your automatic transaxle.
ing if you check your transaxlefluid.
seconds and then pullit back out
Damage caused by fluid other than
again.
DEXRON@-111 or DEXRON@-IIEis not
Check the fluid level only when your
3. Check both sides of the dipstick, and covered by your new vehicle warranty.
engine is off, the vehicle is parked on
read the lowerlevel. The fluid level
0 After adding fluid, recheck the fluid
a level place and the transaxle is cool
must be between the two dimples in
level as described under “How to
enough
for you to rest your fingers on
the hot range.
Check.”
the transaxle case.
4. If the fluid level is in the acceptable
When the correct fluid level is
range, push the dipstick back in all the obtained, push the dipstick backin all
way.
the way.
155
...
Service and Appearance Care
Then, follow these steps:
1. Remove the filler plug.
2. Check that the lubricant level is up to
the bottom of the filler plug hole.
3. If the fluid level is good, install the
plug and be sure it is fully seated. If
the fluid level is low, add more fluid
as described in the next steps.
How to Add Fluid:
Here’s how to add fluid. Refer to the
Maintenance Scheduleto determine what
kind of fluid to use. See “Recommended
Fluids and Lubricants” in the Index.
1. Remove the filler plug.
2. Add fluid at the filler plug hole. Add
only enough fluid to bring the fluid
level up to the bottom of the filler
plug hole.
3. Install the filler plug. Be sure the plug
is fully seated.
How to Check
The proper fluid should be addedif the
level is at or below the“MIN’ mark on
the reservoir. See the instructions on the
reservoir cap.
Engine Coolant
Hydraulic Clutch
The hydraulic clutch in your vehicle is
self-adjusting. The clutch master cylinder
reservoir is filled with hydraulic clutch
fluid.
It isn’t a good idea to “topoff” your clutch
fluid. Adding fluid won’t correct a leak.
A fluid loss in this system could indicate
a problem. Have the system inspected and
repaired.
The following explains your cooling
it is
system and how to add coolant when
low. If you have a problem with engine
overheating, see “Engine Overheating”in
the Index.
The proper coolant for your Geo will:
Give freezing protection down to
-34°F (-37°C).
Give boiling protection up to 262°F
(128°C)
8
.
Protect against rust and corrosion.
Help keep the proper engine
temperature.
Let the warning lights work as they
should.
When to Check and Whatto Use
Refer to the Maintenance Schedule to
What to Use:
determine how often you should check
Use a mixture of one-half clean water
the fluid level in your clutch master
cylinder reservoir and for the proper fluid. (preferably distilled) and one-half
antifreeze that meets “GM Specification
See “Owner Checksand Services” and
“Recommended Fluids and Lubricants” in 1825-M,” which won’t damage aluminum
parts. You can also use a recycled coolant
the Index.
. . .156
conforming to GM Specification 1825-M
with a complete coolant flush and refill.
If you use this mixture, you don’t need to
add anything else.
Adding Coolant:
To Check Coolant: When your engine is
cold, the coolant level shouldbe at
“LOW,” or a little higher. When your
engine is warm, the level should be up to
“FULL,” or a little higher.
TOAdd Coolant: If you need to add more
coolant, add the proper mix at the coolant
recovery tank.
NOTICE:
If you use an improper coolant mix,
your engine could overheat andbe
badly damaged. The repair cost
wouldn’t be covered by your
warranty. Too much water in the
mix can freeze and crack the engine,
radiator, heater core and other parts.
157 ...
Add coolant mix at the recoverytank, but
be careful not to spill it.
i.a,
:
.e.. <
.
/
Power Steering Fluid
Radiator Pressure Cap
,
.,,
NOTICE:
Your radiator cap is a15 psi (105 Wa)
pressure-type cap and must be tightly
installed to prevent coolant loss and
possible engine damage from overheating. Be sure the arrows on the
cap line up with the overflow tube
on the radiator filler neck.
When you replace your radiator pressure
cap, an AC@ cap is recommended.
. . .I58
lrliermostat
*
. ..,%.~:
Rnglne.*
@oa€iM
*,;4
::,
temperatuie
is
controlled
by &mostat ih t h & engihk Cbblaht
system. The th&rmostat stops the
flow
D f coolant through the radiator until the
Eoolant reaches a preset temperature.
When you replace your thermostat, an
AC@ thermostat is recommended.
How to Check Power Steering Fluid
Unscrew the cap and wipe the dipstick
with a clean rag. Replace the cap and
completely tighten it. Then remove the
cap again and look at the fluid level on
the dipstick.
/ -
1
0
When the engine compartment is hot,
thelevelshouldbebetweenthe
“HOT” marks.
When the engine compartmentis cool,
the level should be between the
“COLD’ marks.
’hat to Add
:fer to the Maintenance Schedule to
:tennine what kind of fluid to use. See
lecommended Fluids and Lubricants”in
e Index.
NOTICE:
When adding power steering fluidor
making a complete fluid change,
always use the proper fluid. Failure
to use the proper fluid can cause
leaks and damage hoses and seals.
Windshield Washer Fluid
To Add:
Open the cap labeled “WASHER FLUID
ONLY.’’ Add washer fluid until the bottle
is full.
Service and Appearance Care
NOTICE:
If you have anti-lock brakes, open the cap
labeled “WASHER FLUIDONLY.” Add
in the bottle
washer fluid until the float
shows that itis full.
. . .160
When using concentrated washer
fluid, follow the manufacturer’s
instructions for adding water.
Don’t mix water with
ready-to-use washer fluid. Water
can cause the solution to freeze
and damage your washer fluid
tank and other partsof the washer
system. Also, water doesn’t clean
as well as washer fluid.
Fill your washer fluid tank only
314 full when it’s very cold. This
allows for expansion, which could
damage the tank if it is completely
full.
Don’t use radiator antifreeze in
your windshield washer. It can
damage your washer systemand
paint.
Brakes
Brake Master Cylinder
Your brake master cylinder is here. It is
filled with DOT-3 brake fluid.
There are only two reasonswhy the brake
fluid level in your master cylinder might
go down.The first is that the brake fluid
goes down to an acceptable level during
normal brake lining wear. When new
linings are put in, the fluidlevel goes
back up. The other reasonis that fluid is
leaking out of the brake system.If it is,
you should have your brake system fixed,
since a leak means that sooner or later
your brakes won’t work well, or won’t
work at all. So, it isn’t a good idea to “top
off’ your brake fluid. Adding brake fluid
won’t correct a leak. If you add fluid
when your linings are worn, then you’ll
have too much fluid when you get new
brake linings. You should add (or remove)
brake fluid, as necessary, only when work
is done on the brake hydraulic system.
NOTICE:
Don’t let someone put in the
wrong kind of fluid. For example,
just a few drops of mineral-based
oil, such as engine oil, in your
brake system can damage brake
system parts so badly that they’ll
have to bereplaced.
Brake fluid can damage paint, so
be careful notto spill brake fluid
on your vehicle. If you do, wash it
off immediately. See “Appearance
Care” in the Index.
Brake Wear
When your brake fluid falls to a low level, Your Geo has front disc brakes and rear
drum brakes.
your brake warninglight will come on.
See “Brake System Warning Light” in the Disc brake pads havebuilt-in wear
Index.
indicators that makea high-pitched
warning sound when the brake padsare
What to Add:
worn and new pads are needed. The
sound may come and go orbe heard all
When you do need brake fluid, use only
the time your vehicle is moving (except
DOT-3 brake fluid - such as Delcowhen
you are pushing on the brake pedal
Supreme 1 l @ (GM Part No. 1052535).
firmly).
Use new brake fluid from a sealed
container only, and always clean the brake
fluid reservoir cap before removing it.
NOTICE:
Continuing to drive with worn-out
brake pads could resultin costly
brake repair.
L
Some driving conditions or climates may
cause a brake squeal whenthe brakes are
first applied or lightly applied. This does
not mean something is wrong with your
brakes.
Your rear drum brakes don’t have wear
indicators, but if youever hear a rear
brake rubbing noise, havethe rear brake
linings inspected. Also, the rear brake
drums should be removed and inspected
each time the tires are removed for
rotation or changing. When you have the
r
161 ...
Service and Appearance Care
front brakes replaced, havethe rear
Replacing Brake System Parts
brakes inspected, too.
rhe braking systemon a modern vehicle
Brake linings should alwaysbe replaced
.s complex. Its many parts haveto be of
as complete axle sets.
:op quality and work well togetherthe
if
vehicle is tohave really good braking.
Brake Pedalnavel
Vehicles we design and test have
Lop-quality GM brake parts in them, as
See your dealerif the brake pedal does
not returnto normal height,or if there is a your Geo does whenit isnew. When you
replace parts of your braking systemrapid increase in pedal travel. This could
For example, when your brake linings
be a sign of brake trouble.
wear down and you haveto have new
mes put in -be sureyou get new
Brake Adjustment
genuine GM replacement parts.If you
Every tinie you make a moderate brake
don’t, your brakes may no longer work
stop, your disc brakes adjustfor wear. If
properly. For example,if someone puts in
you rarely makea moderate or heavier
brake linings that are wrongfor your
stop, then your brakes might not adjust
vehicle, the balance between your front
correctly. If you drive in that way, then - and rear brakes can change,for the worse.
very carefully- make a few moderate
The braking performance you’ve come
to
brake stops about every1,000 miles
expect can change in many other ways if
(1 600 km), so your brakes willadjust
someone puts in the wrong replacement
properly.
brake parts.
If your brake pedal goes downfarther
than normal, your rear drum brakes
may
need adjustment. Adjust them by backing
up and f i i l y applying the brakes a few
times.
Battery
Every new Geo hasa Delco Freedom@
3attery. You never have to add waterto
me of these. When it’s timefor a new
3attery, we recommend a Delco
Freedom@ battery. Get one that has the
zatalog number shown on the original
battery’s label.
Vehicle Storage
[f you’re not going to drive your vehicle
For 25 days or more, take off the black,
negative (-) cable from the battery.This
will help keep your battery from running
down.
Contact your dealer to learn
how to
prepare your vehiclefor longer storage
periods.
. ..I62
Bulb Replacement
See “Replacement Bulbs”in the Index to
check the size and typeof bulb you need
to use.
Halogen Bulbs
I
Headlights
1. Open the hood.
2. If you’re replacing a driver side
headlight bulb, you needto remove
the air duct behind the headlight
assembly.
Pry up on the center of the plastic
clip and pull it out.
Pull out the outer part of the
plastic clip.
0 Remove the air duct.
3. Reach behind the headlight assembly
and find the lock ring assembly.
4. Turn the lock ring assembly to the left
It doesn’t comeoff.
5. Pull the bulb socketout of the
housing.
6. Pull the connector apart to remove the
bulb assembly.
163. ..
Service and Appearance Care
Front Sidemarker Lights
7. Reverse the steps with a new bulb
assembly.
1. Remove the screw in the lens.
If you replaced a driver side bulb,
2. Remove the front sidemarker light
replace the air duct, slide the outer
assembly. There is a snap-in connector
part of the plastic clip into the hole
at the front of the assembly, so you
and then push in the centerof the
may have to pry carefully on the rear
clip.
of the assembly to remove it.
3. Turn the bulb socket counterclockwise
and pull it out.
4. Pull the bulb straight out.
5. Reverse the steps with a new bulb.
.. ,164
Front Turn Signal Lights
1. Remove the screw in the parking light
lens and remove parking light
assembly.
2. Remove the screw from the turn
signal assembly.
3. Pull on the rear edge of the assembly,
slide it towardthe rear and pullit out
to remove it.
4. Turn the bulb socket counterclockwise
and pull it out.
5. Push the bulb in, turn it
counterclockwise and pull it out.
6. Reverse the steps with a new bulb.
Parking Lights
3. Turn the bulb socket clockwise and
pull it out.
1. Remove the screw near the top outside
of the headlight assembly.
4. Pull the bulb straight out.
2. Remove the parking light assembly,
5. Reverse the steps with a new bulb.
There is a snap-in connector in the
assembly, so you may have to pry
carefully on the inside edgeof the
assembly to remove it.
165 ...
Service and Appearance Care
-i
\
\
:enter High-Mounted Stoplight
Push in the centerof the clips on both
sides of the high-mounted stoplight
.
housing.
!. Pull the clips out.
1. Remove the cover.
... I 6 6
4. Remove the screw from the stoplight
reflector.
5. Remove the stoplight reflector.
6. Pull the bulb straight out.
7. Reverse the steps with a new bulb.
Push the center of the clip so it
slides part way out, put the clip
into the housing and then pushthe
center in.
Rear Combination Lights
The combination light assembly include
the taillighthtoplight, turn signal and
sidemarker bulbs.
1. Open the trunk.
2. Remove the two bolts from the lens
assembly.
3. Remove the trunk trim.
Move the carpet.
Loosen the two clips on the trunk
trim near the trunk opening. Pop
the clips out.
Pull the trunk trim away from the
rear of the trunk.
Remove the nut from the stud near
the
rear corner of the trunk.
167
...
Service and Appearance Care
5. Remove the rear combination light
assembly. There is a snap-in connector
in the assembly, so you may have to
pull carefully on the inside edgeof the
assembly to remove it.
6. Turn the bulb socket counterclockwise
and pull it out.
7. For the taiVstop or turn signal lights,
push the bulb in, turn it
counterclockwise and pull it out.For
the sidemarker bulb, pull it straight
out.
8. Reverse the steps with a new bulb.
.. . I 6 8
License Plate Light
1. Pry on the lever on the license plate
light assembly and lowerit out of the
bumper.
2. Turn the bulb socket counterclockwise
and pull it out of the light assembly.
3. Pull the bulb straight out.
4. Reverse the steps with a new bulb.
When you put the light assembly
back into the bumper, put the side
without the lever in first, then snap
in the lever side.
Back-up Light
1. Open the trunk.
2. Remove the trim on the trunk lid (if
your vehicle is so equipped).
3. Remove the screw from the back-up
light.
4. Pull the bulb housing assembly
through the opening in thetrunk lid.
5. Push the bulb in, turn it
counterclockwise and pullit out.
6. Reverse the steps with a new bulb.
GEO
.
PRIZM
MFG. BY NEW UNITED MOTOR MANUFACTURING
INC.
GVWR
GAWRFR
RR
BA416932
I
Loading Your Vehicle
Two labels on your vehicle show how
much weight it may properly carry. The
Tire-Loading Information label found in
the glove compartment tells you the
proper size, speed rating and
recommended inflation pressures for the
tires on your vehicle. It also gives you
important information about the number
of people that can bein your vehicle and
the total weight that you can carry. This
weight is called the Vehicle Capacity
Weight and includes the weight of all
occupants, cargo, and all
nonfactory-installed options.
The other label is the Certification label,
found on the rear of the driver's door
opening. It tells you the gross weight
capacity of your vehicle, called the
GVWR (Gross Vehicle Weight Rating).
The GVWR includes the weight of the
vehicle, all occupants, fuel and cargo.
Never exceed the GVWR for your
vehicle, or the Gross Axle Weight Rating
(GAWR) for either the front or rear axle.
And, if you do have a heavy load, you
should spread it out. Don't carry more
than 125 pounds (56.7 kilograms) in you1
trunk.
I
NOTICE:
Your warranty does not cover parts or
components that fail becauseof overloading.
L
If you put things inside your vehiclelike suitcases, tools, packages, or
anything else - they will go as fast as the
vehicle goes. If you have to stop or turn
quickly, or if there is a crash, they'll keep
going.
169..,
Service and Appearance Care
Tires
We don’t make tires. Your new vehicle comes with high quality tires madeby a
leading tire manufacturer. These tires are warrantedby the tire manufacturers and
their warrantiesare delivered with everynew Geo. If your spare tire isa different
brand than your road tires, you will have a tire warranty folder from eachof these
manufacturers.
. . .170
Inflation - Tire Pressure
The Tire-Loading Information label whichis in the glove compartment shows the
correct inflation pressures for your tires,when they’re cold. “Cold” means your
vehicle has been sitting for at least three hours or driven no more thana mile.
NOTICE:
Don’t let anyone tell you that underinflationor overinflation is all right. It’s not.
If your tires don’t have enough air (underinflation)
you can get:
0
Toomuchflexing
Toomuchheat
Tireoverloading
Badwear
0
Bad handling
0
0
0
Badfueleconomy.
If your tires havetoo much air (overinflation), you can get:
0 Unusualwear
0 Badhandling
0 Roughride
Needless damage from road hazards.
When to Check: Check your tires
once a month or more. Don’t forget
your compact spare tire.It should be
at 60 psi (420 kPa).
How to Check: Use a good quality
pocket-type gage to check tire
pressure. Simply looking at the tires
will not tell you the pressure,
especially if you have radial tires which may look properly inflated even
if they’re underinflated.
If your tires have valve caps, be sure to
put them back on. They help prevent
leaks by keeping out dirt and moisture.
Service and Appearance Care
Tire Inspection and Rotation
To make your tires last longer, have them
inspected and rotated at the mileages
recommended in your Maintenance
Schedule. See “Scheduled Maintenance
Services” in the Index.
Use this rotation pattern.
After the tires have been rotated, adjust
the front and rear inflation pressure as
shown on the Tire-Loading Information
label. Make certain that all wheel nuts are
properly tightened. See “Wheel Nut
Torque” in the Index.
. ,172
When It’s Time for New Tires
)ne way to tell when it’s time for new
ires is to check the treadwear indicators,
vhich will appear when your tires have
mly 2/32 inch (1.6 mm) or less of tread
emaining,
lou need a new tire i f
You can see the indicators at threeor
more places around the tire.
You can see cord or fabric showing
through the tire’s rubber.
The tread or sidewallis cracked, cut
or snagged deep enough to show cord
or fabric.
B The tire has a bump, bulge or split.
Uniform Tire Quality Grading
The following informationrelates to the
system developedby the United States
National Highway Traffic Safety
Administration which grades tiresby
Buying New Tires
treadwear, traction and temperature
To find out what kind andsize of tires you performance. (This applies only to
vehicles sold inthe United States.)
need, look at the Tire-Loading
Information label.
Make sure the replacements are the same Treadwear
The treadwear gradeis a comparative
size, load range, speed rating and
rating based onthe wear rate of the tire
construction type (bias, bias-belted or
when
tested under controlled conditions
radial) as your original tires.
on a specified government testcourse. For
example, a tire graded 150 would wear
one and a half (1 1/2) times as wellon the
government course asa tire graded 100.
The relative performance of tires depends
upon the actual conditionsof their use,
however, and may depart significantly
from the norm due to variations indriving
habits, service practices and differences in
road characteristics and climate.
0
The tire has a puncture, cut, or other
damage that can’t be repaired well
because of the size or location of the
damage.
asphalt and concrete.A tire marked C
may have poor traction performance.
Warning: The traction grade assignedto
this tire is based. on braking
(straight-ahead) traction tests and does
not include cornering (turning) traction.
Temperature -A, B, C
The temperature grades areA (the
highest), B, and C, representing the tire’s
resistance to the generation of heat and its
ability to dissipate heat when tested under
controlled conditions ona specified
indoor laboratory test wheel. Sustained
high temperature cancause the material
of the tire to degenerate and reducetire
life, and excessive temperature can lead
to
sudden tire failure. The gradeC
corresponds to a level of performance
which all passenger cartires must meet
under the Federal Motor Vehicle Safety
Standard No. 109. Grades B and A
represent higherlevels of performance on
the laboratory test wheel than the
minimum requiredby law.
Traction -A, B, C
Warning: The temperature gradefor this
The traction grades, from highestto
tire is established for a tire that is properly
lowest are: A, B, and C. They represent
the tire’s abilityto stop on wet pavement inflated and not overloaded. Excessive
as measured under controlled conditions ,speed, underinflation,or excessive
loading, either separately or in
on specified government test surfaces of
173.
..
I
Service and Appearance Care
combination, can cause heat buildup and
possible tire failure.
These grades are molded on the sidewalls
of passenger car tires.
While the tires available as standardor
optional equipment on General Motors
vehicles may vary with respect to these
grades, all such tires meet General Motors
performance standards and havebeen
approved for useon General Motors
vehicles. All passenger type (P Metric)
tires must conform to Federal safety
requirements in addition to these grades.
Wheel Alignment and Tire Balance
The wheels on your vehicle were aligned
and balanced carefully at the factory to
give you the longest tire life and best
overall performance.
In most cases, you will not need to have
your wheels aligned again. However, if
you notice unusual tire wear or your
vehicle pulling one way or the other, the
alignment may need to be reset. If you
notice your vehicle vibrating when
driving on a smooth road, your wheels
may need to be rebalanced.
Wheel Replacement
Replace any wheel that is bent, cracked or
badly rusted. If wheel nuts keep coming
loose, the wheel, wheel bolts, and wheel
nuts should be replaced. If the wheel
leaks air, replace it (except some
aluminum wheels, which can sometimes
be repaired). See your Geo dealerif any
of these conditions exist.
Your dealer will know the kind of wheel
you need.
Each new wheel should have the same
load carrying capacity, diameter, width,
offset, and be mounted the same way as
the one it replaces.
I
.
.
174
If you need to replace any of your wheels,
wheel bolts, or wheel nuts, replace them
only with new GM original equipment
parts. This way, you will be sure to have
theright wheel, wheelbolts,andwheel
nuts for your Geo.
'
NOTICE:
The wrong wheel canalso cause
problems with bearinglife, brake
cooling, speedometer/odometer calibration, headlight aim,bumper
height, vehicle ground clearance, and
tire or tire chain clearanceto the
body and chassis.
Used Replacement Wheels
rire Chains
NOTICE:
Use tire chains only where legal and
only when you must. Use only SAE
Class “S” type chains that are the
proper size for your tires. Install them
on the front tires and tighten them as
tightly as possible with the ends
securely fastened. Drive slowly and
follow the chain manufacturer’s
instructions. If you can hear the
chains contacting your vehicle, stop
and retighten them. If the contact
cGntinues, slow down until it stops.
Driving too fast with chains on will
damage your vehicle.
175 ...
Service and Appearance Care
Appearance Care
Remember, cleaning products can be
hazardous. Some are toxic. Others can
burst into flame if you strike a match or
get them on a hot part of the vehicle.
Some are dangerousif you breathe
their fumes in a closed space. When
you use anything from a container to
clean your Geo, be sure to follow the
manufz.qurer’s warnings and
instruc:ions. And always open your
doors or windows when you’re cleaning
the inside.
Never use these to clean your vehicle:
0
0
0
0
0
0
0
0
Gasoline
Benzene
Naphtha
CarbonTetrachloride
Acetone
PaintThinner
Turpentine
LacquerThinner
NailPolishRemover
They can all be hazardous - some more
than others - and they can all damage
your vehicle, too.
Don’t use any of these unless this
manual says you can. In many uses,
these will damage your vehicle:
0 Alcohol
0 Laundry
Soap
0 Bleach
0 ReducingAgents
. . .I76
Cleaning the Insideof Your
Geo
Use a vacuum cleaner often to get rid
of dust and loose dirt. Wipe vinyl or
leather with a clean, damp cloth.
Your Geo dealer has twoGM cleaners,
a solvent-type spot lifter anda foam-type
powdered cleaner. They will clean
normal spots and stains very well.Do
not use them on vinyl or leather.
Here are some cleaning tips:
0 Always read the instructions on the
cleaner label.
Clean up stains as soon as you can
- before they set.
0
Use a clean cloth or sponge, and
change to a clean area often. A soft
brush may be used if stains are
stubborn.
Use solvent-type cleaners in a
well-ventilated area only. If you use
them, don’t saturate the stained area.
If a ring forms after spot cleaning,
clean the entire area immediately or
it will set.
Using Foam-Type Cleaneron Fabric
0 Vacuum and brush the area to remove
any loose dirt.
0 Always clean a whole trim panel or
section. Mask surrounding trim along
stitch or welt lines.
0 Mix Multi-Purpose Powdered Cleaner
following the directions on the
container label.
0 IJse suds only and apply with a clean
sponge.
0 Don’t saturate the material.
0 Don’t rub it roughly.
0 As soon as you’ve cleaned the section,
use a sponge to remove the suds.
0 Rinse the section with a clean, wet
sponge.
0
0
When you clean a stain from fabric,
immediately dry the area with an air
hose, hair dryer, or heat lampto help
prevent a cleaning ring. (See the
previous NOTICE.)
Wipe off what’s left with a slightly
damp paper towel or cloth.
Then dry it immediately with a blow
dryer or a heat lamp.
I NOTICE:
I
Be careful with a hair dryer or heat
lamp. You couldscorch the fabric.
I
Wipe with a clean cloth.
Using Solvent-l‘ypeCleaner on Fabric
First, see if you have to use solvent-type
cleaner at all. Some spots and stainswill
clean off better with just water and mild
soap.
If you need to use a solvent:
0 Gently scrape excess soil from the
trim material with a clean, dull knife
or scraper. Use very little cleaner, light
pressure and clean cloths (preferably
cheesecloth). Cleaning should start at
the outside of the stain, “feathering”
toward the center. Keep changing to a
clean section of the cloth.
Fabric Protection
Your Geo has upholstery that has been
treated with Scotchgard Fabric
Protector, a 3M product. Scotchgard”
protects fabrics by repelling oil and water,
which are the carriers of most stains.
Even with this protection, you still need
to clean your upholstery often to keep it
looking new.
Further information on cleaning is
wailable by calling 1-800-433-3296
:in Minnesota, 1-800-642-6 167).
TM
I
Special Cleaning Problems
Greasy or oily stains:Such as grease,
>il, butter, margarine, shoe polish, coffee
with cream, chewing gum, cosmetic
:reams, vegetable oils, wax crayon, tar
and asphalt.
Carefully scrape off excess stain.
Followthesolvent-typeinstructions
described earlier.
177.
I
Service and Appearance Care
Shoe polish, wax crayon, tar and
asphalt will stain if left on a vehicle
seat fabric. ‘They should be relnoved
as soon as possible. Be careful,
because the cleaner will dissolve them
and may cause them to spread.
Non-greasy stains: Such as catsup,
coffee (black), egg, fruit, fruitjuice, milk,
soft drinks, wine, vomit, urine and blood.
Carefully scrape off excess stain, then
sponge the soiled area with cool water.
If a stain remains, follow the
foam-type instructions above.
If an odor lingers after cleaning
vomit or urine, treat the area with
a waterhaking soda solution:
1 teaspoon (5 1111) of baking soda to
1 cup (250 m l ) of lukewarm water.
If needed, clean lightly with
solvent-type cleaner.
Combination stains: Such as candy,
ice cream, mayonnaise, chili sauce and
unknown stains.
0 Carefully scrape off excess stain, then
clean with cool water and allow to
0
dry.
If a stain remains, clean it with
solvent-type cleaner.
. . .I78
Cleaning Vinyl
Use warm water and a clean cloth.
Rub with a clean, damp cloth to
remove dirt. You may have to do it
Inore than once.
Things like tar, asphalt and shoe
polish will stain if you don’t get them
off quickly. Use a clean cloth and
solvent-type vinyl cleaner.
Cleaning theTop of the Instrument
Panel
Use only mild soap and water to clean
the top surfaces of the instrument panel.
Sprays containing siliconesor waxes
may cause annoying reflectionsin the
windshield and even makeit difficult to
see through the windshield under certain
conditions.
Care of Safety Belts
Cleaning Leather
Keep belts clean and dry.
Use a soft cloth with lukewarm water and
a mild soap or saddle soap.
For stubborn stains, use a mild
solution of 10% isopropyl alcohol
(rubbing alchohol) and90% water.
Never use oils, varnishes,
solvent-based or abrasive cleaners,
furniture polish or shoe polish on
leather.
Soiled leather should be cleaned
immediately. If dirt is allowed to work
into finish, it can harm the leather.
Glass
Glass should be cleaned often. GM Glass
Cleaner (GM Part No. 1050427) or a
liquid household glass cleaner will
remove normal tobacco smoke and dust
films.
Creaning the Outsideof Your
Geo
GM approved cleaning products from
your dealer. (See “Appearance Care and
Materials’’ in the Index.)
The paint finish on your vehicle provides
beauty, depth of color, gloss retention and Your Geo has a “ba~ec~atlclearc~at~’
paint finish. The clearcoat gives more
durability.
depth and gloss tothe colored basecoat.
Always use waxes and polishes that
Washing Your Vehicle
are non-abrasive and made for a
The best way to preserve your vehicle’s
basecoatlclearcoat paint finish.
finish is to keepit clean by washing it
Cleaning the Outsideof the Windshield often with lukewarm or cold water.
and Wiper Blades
Don’t wash your vehicle in the direct rays
NOTICE:
of
the
sun.
Don’t
use
strong
soaps
or
If the windshield is not clear after using
chemical detergents. Use liquid hand, dish Machine compounding or aggressive
the windshield washer,or if the wiper
polishing on a basecoatlclearcoat
or car washing (mild detergent) soaps.
blade chatters when running,wax or
paint finish may dull the finish or
Don’t use cleaning agents that are
other material may be on the blade or
leave swirl marks.
petroleum based, or contain acid or
windshield.
abrasives. All cleaning agents should be
Clean the outsideof the windshield with flushed promptly and not allowed to dry
Aluminum Wheels (If So Equipped)
GM Windshield Cleaner, Bon-Ami
on the surface, or they could stain. Dry
Powder@ (GM PartNo. 1050011). The
Your aluminum wheels have a protective
the finish with a soft, clean chamoisor a
windshield is cleanif beads do not form
coating similar to the painted surface
of
100% cotton towel to avoid surface
when you rinse it with water.
your
vehicle.
Don’t
use
strong
soaps,
scratches and water spotting.
chemicals, chrome polish, abrasive
Clean the bladeby wiping vigorously
High pressure car washesmay cause
cleaners or abrasive cleaning brushes on
with a cloth soaked in full strength
water to enter your vehicle.
them because you could damage this
windshield washer solvent. Then rinse
coating. After rinsing thoroughly,a wax
the blade with water.
Finish Care
may be applied.
Occasional waxing ormild polishing of
Wiper blades should be checked ona
your Geo may be necessary to remove
regular basis and replaced when worn.
residue from the paint finish.You can get
Don’t use abrasive cleaners on glass,
because they may cause scratches. Avoid
placing decals on the inside rear window,
since they may have to be scraped off
later. If abrasive cleaners are used on the
inside of the rear window, an electric
defogger element may be damaged. Any
temporary license should not be attached
across the defogger grid.
179..,
Service and Appearance Care
NOTICE:
If you have aluminum wheels, don’t
use an automatic vehicle wash that
has hard silicon carbide cleaning
brushes. These brushes can takeoff
the protective coating.
Tires
Your Geo dealer hasa GM White
Sidewall Tire Cleaner.You can use a
stiff brush with the cleaner.
When applying a tire dressing always takc
care to wipe off any overspray or splash
from painted surfaces. Petroleum-based
products may damage the paintfinish.
Weatherstrips
Silicone grease on weatherstrips will
make them last longer, seal better, and
not stick or squeak. Apply silicone grease
with a clean cloth at least every six
months. During very cold, damp weather
more frequent applicationmay be
required. (See “Recommended Fluids
and Lubricants” in the Index.)
...I80
Underbody Maintenance
Chemicals used for ice and snow removal
and dust control can collect on the
underbody. If these are not removed,
accelerated corrosion (rust) can occur on
the underbody parts such as fuel lines,
frame, floor pan, and exhaust system even
Foreign Material
though they have corrosion protection.
Calcium chloride and other salts, ice
At least every spring, flush these materials
melting agents, road oil and tar, treesap, from the underbody with plain water.
bird droppings, chemicals from industrial Clean any areas where mud and other
chimneys, and other foreign matter can debris can collect. Dirt packed in closed
damage your vehicle’s finishif they
areas of the frame should be loosened
remain on painted surfaces. Use cleaners before being flushed. Your dealer or an
that are marked safe for painted surfaces underbody vehicle washing system can do
to remove foreign matter.
this for you.
Sheet Metal Damage
[f your vehicle is damagedand requires
sheet metal repair or replacement, make
sure the body repairshop applies anticorrosion material to the parts repaired or
replaced to restore corrosion protection.
Chemical Paint Spotting
Finish Damage
Some weather and atmospheric conditions
Any stone chips, fractures or deep
can
create a chemical fallout. Airborne
scratches in the finish shouldbe repaired
pollutants can fall upon and attack painted
right away. Bare metal will corrode
surfaces on your vehicle.This damage
quickly and may develop into a major
can take two forms: blotchy, ringletrepair expense.
shaped discolorations, and small irregular
Minor chips and scratches can be repaired
dark spots etched into the paint surface.
with touch-up materials available from
your dealer or other service outlets. Larger Although no defectin the paint job causes
areas of finish damage canbe corrected in this, Geo will repair, at no charge to the
owner, the surfaces ofnew vehicles
your dealer’s body and paint shop.
damaged by this fallout condition within
12 months or 12,000 miles (20 000 km)
of purchase, whichever comes first.
1
Appearance Care Materials Chart
IPART NUMBER I
1051516
1050172
10501 73
10501 74
SIZE
32 02. (0.946 L)
16 or. (0.473 L)
16 02. (0.473 L)
16 oz. (0.473 L)
I
DESCRIPTION
. .
Washer Solvent andGas Liner De-leer
Tar and RoadOil Remover
Polish
White Sidewall Tire Cleaner
I
USAGE
~.
.
I
Windshield washing system and
gas line
Also old waxes, polishes
Removes rust and corrosion on chrome and steel Cleaner a
Cleans white and blacktires
*Not recommended for pigskin suede leather.
See your General Motors Dealerfor these products.See the Index under "Recommended Fluids and
Lubricants" for other products.
181 . .
Service and Appearance Care
Service Parts
Identification Label
J
Vehicle Identification
Number (VIN)
This is the legal identifier
for your Geo.
It appears on a plate in the front corner
of
the instrument panel, on the driver’s side.
You can see it if you look through the
windshield from outside your vehicle.
The VIN also appears on the Vehicle
Certification and ServiceParts labels and
the certificatesof title and registration.
Engine Identification
The eighth character in yourVIN is the
engine code. This code will help you
identify your engine, specifications, and
replacement parts.
. . .182
You’ll find this label on your spare tire
cover. It’s very helpful if you ever need to
order parts. On this label is:
your VIN,
0 themodeldesignation,
paintinformation,and
0 a list of all production options and
special equipment.
Be sure that this label is not removed
from the vehicle.
Add-on Electrical
Equipment
NOTICE:
Don’t add anything electrical to
your Geo unless you check with
your dealer first. Some electrical
equipment can damage your vehicle
and the damage wouldn’t be covered
by your warranty. Some add-on
electrical equipment can keep other
components from working as they
should.
Your vehicle has an air bag system.
Before attempting to add anything
electrical to your Geo, see “Servicing
Your Air-Bag Equipped Geo” in the
b’
Fuses and Circuit
Breakers
The wiring circuits in your vehicle are
protected from shortcircuits by fuses,
circuit breakers and fusible therrnal links
in the wiringitself. This greatly reduces
the chance of fires caused by electrical
problems.
Your fuse block is beneath the instrument
panel near the driver’s door. For accessto
the fuses, pull the knob on the cover.
vlost of your fuses are in the fuse block.
Some are in two electrical centers in your
mgine compartment. These electrical
:enters, plusa component center behind
(our glove box, also have relays, circuit
Jreakers and other electrical components.
rhe larger electrical center in the engine
:ompartment has a fuse puller attached to
he inside of the cover. You can use the
Idler to remove any fuses.
Look at the silver-colored band inside
:he fuse.If the band is broken or melted,
.eplace the fuse. Be sure you replace a
>adfuse with a new one of the correct
;ize.
[f you ever have a problem on the road
md don’t have a spare fuse, you can
orr row one. Just pick somefeature of
your vehicle that you can get along
without - like the radio or cigarette
lighter - and use its fuse, if it is of the
value you need. Replace it as soon as
you can.
Before replacing a fuse, turn every
vehicle electrical switch off.
geadlights
The headlight wiring is protected by a
:ircuit breaker. An electrical overload will
:ause the lights to go on andoff, or in
iome cases to remainoff. If this happens,
lave your headlight wiring checked right
iway.
Windshield Wipers
The windshield wiper motor is protected
3y a circuit breaker anda fuse. If the
notor overheats due to heavy snow, etc.,
he wiper will stop until the motor cools.
[f the overload is caused by some
:lectrical problem and not snow,etc., be
sure to get it fixed.
Power Windows and Other Power
Dptions
Zircuit breakers protect the power
windows and other power accessories.
When the current loadis too heavy, the
5rcuit breaker opens andcloses,
protecting the circuit until the problem is
fixed or goes away.
183
...
Service and Appearance Care
c
Fuse Block
Driver Side Instrument Panel
1 - NotUsed
2 - Ignition (10 Amp.)
3 - Stop (15 Amp.)
4 - NotUsed
5 - Cigarette Lighter and Radio (20
Amp.)
6 - ECU-B (10 Amp.)
7 - Turn Signal (7.5 Amp.)
. . .184
8 - Gage (10 Amp.)
9 - Taillight (15 Amp.)
10 - Defogger - I/UP (7.5 Amp.)
11 - ECU-IG (15 Amp.)
12 - Wiper (20 Amp.)
A - Power (30 Amp.)
B - Defroster (30 Amp.)
Engine Compartment
1 - Electronic Fuel Injection F/HTR
(15 Amp.)
2 - Alternator-S (7.5 Amp.)
3 - Fan (30 Amp.)
4 - Dome Light (20 Amp.)
5 - Hazard Warning Flashers; Horn
(20 Amp.)
6 - Fan - I/UP (7.5 Amp.)
7 - Left Head (1 5 Amp.)
8 - Right Head (15 Amp.)
9 - Not Used (Spare)
10 - Not Used (Spare)
11 - Not Used (Spare)
12 - AM2 (30 Amp.)
a - Anti-Lock Brake System
(50 Amp.)
b - Alternator (100 Amp.)
c - AM1 (40 Amp.)
A - Electronic Fuel Injection F/HTR
Relay
B - Headlight Relay
C - Engine Main Relay
D - Fan Relay #1
E - Horn Relay
t
1
Sngine Compartment Relay Block
1 - CDS (30 Amp.)
2 - Air Conditioner MG Relay
3 - Air Conditioner Fan Relay #3
4 - Air Conditioner Fan Relay #2
'assenger Side Kick Panel
1 - Air Conditioner ( 15 Amp.)
2 - Heater (40 Amp.)
185
...
Service and Appearance Care
Replacement Bulbs
AutomaticTransaxle ...............................................
158
Back-up ........................................................
1156
Headlight (High Beam).............................................
9005
Headlight (Low Beam) .............................................
9006
Heater or Air Conditioning Control .....................................
74
168
High-MountedStop ................................................
Indicator Lights
PC745
ABSActive ...................................................
......................................................
Air
Bag
74
Brake ..........................................................
Check Engine ....................................................
74
Cruise .......................................................
PC745
74
FastenBelts .....................................................
Headlight High Beam ..............................................
74
74
OilPressure .....................................................
...................................................
Rear
Defogger
74
74
stop Lamp .......................................................
74
Turnsignal ......................................................
74
Volts (Battery) ...................................................
158/74
Instrument Cluster ...............................................
Licenseplate ......................................................
168
ParkingLight .....................................................
194
Sidemarker
Front ........................................
............. 194
Rear ...... .............................
............. 168
.............................
.......... 2057
TaiVStop .....
Turn Signal
Front ................
..... 1156
.............................
... 2057
Rear .............
...............................
...186
PC745
Capacities and Specifications
Engine
L4
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Compression Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.5: 1
Firingorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-3-4-2
Fuel Delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Multi-Port Fuel Injection
Piston Displacement
VIN Engine Code 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 CID (1.6L)
108 CID ( 1 .8L)
VIN Engine Code 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DoubleOverheadCam
Valve Arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ThermostatTemperatureSpecification . . . . . . . . . . . . . . . . . . . . . . . . .
180°F (82°C)
Replacement Parts
Air
Cleaner
Filter
.............................
. . . . . . . . . . . . A1 164C
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
35-60
Engine Oil Filter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GM Part No. 94842810
Spark Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GMPartNo. 94853696
Wheel Nuts
Wheel Nut Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
76 Ib. ft. (103 N-m)
Capacities (Approximate)
The following approximate capacities are givenin U.S. and metric conversions.
Air Conditioning? . . . . . . . . . . . . . See the refrigerant information label under hood.
Automatic Transaxle
. . . . . . . . . . . 2.6
qt.
(2.5L)**
3-Speed . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.5 qt. (3.3L)**
Differential(3-speedonly) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.5 qt. (1.414
t Not all air conditioning refrigerants are the same. If the air conditioning system
in your vehicle needs refrigerant,be sure the proper refrigerant is used. If you’re
not sure, ask your Geo dealer.
187 ...
Service and Appearance Care
Capacities (Approximate)- continued
Cooling System
Manual Transaxle
6.3 qt. (6.0L)
VIN Engine Code 6 ...................................
6.6 qt. (6.2L)
VIN Engine Code 8 .................................
Automatic Transaxle
VIN Engine Code 6 ...................................
6.2 qt. (5.9L)
6.4 qt. (6.1L)
VIN Engine Code 8 .................................
Crankcase
VIN Engine Code 6
Oil Change With Filter .................................
3.2 qt. (3.0L)*
3.0 qt. (2.8L)*
Oil Change Without Filter ..............................
VIN Engine Code8
3.9 qt. (3.7L)*
Oil Change With Filter .................................
3.7 qt. (3.5L)*
Oil Change Without Filter ..............................
FuelTank .............................................
13.2gal.(50L)
2.7 qt. (2.6 L)**
Manual Transaxle ........................................
* When changing the oil filter, additional oilmay be needed. Recheck the oil level
after filling. See “Engine Oil” in the Index.
** Recheck fluid level after filling. See “Automatic Transaxle Fluid” or “Manual
Transaxle Fluid” in the Index.
Vehicle Dimensions
Wheelbase . . . . . . . .
............................ .97.1” 465
(2
mm)
Tread
Front ..............................................
.57.5” ( 1 460mm)
Rear ..............................................
.57.1 ‘I (1 450 mm)
Length ..............................................
173.0’‘ (4 395 mm)
Width ...............................................
.66.3“ (1 685 mm)
Height ..........................
. . . . . . . . . . . . . ..53.3“ 355
(1mm)
...188
IMPORTANT:
KEEP THE ENGINE OIL
AT THE PROPER
LEVEL AND CHANGE AS
RECOMMENDED
T h i s part covers the
maintenance required for your
Geo. Your vehicle needs these
services to retain its safety.
dependability and emission
control performance
.
I
Part f
Maintenance Schedule
Section
Introduction: A Word about Maintenance . . . . . . . . . . . . . . . . . . . . . . . .
190
YourVehicleandtheEnvironment
.........................
190
HowThisPart Is Organized . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
190
A ScheduledMaintenanceServices . . . . . . . . . . . . . . . . . . . . . . . . . . . .
191
Using Your MaintenanceSchedule . . . . . . . . . . . . . . . . . . . . . . . . . 191
Selecting the Right Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
192
Schedule1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Schedule11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
194
Explanation of Scheduled Maintenance Services . . . . . . . . . . . . . . 196
B OwnerChecksandServices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
198
AtEachFuelFill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
At Least Once a Month . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
199
At Least Twice a Year . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
199
AtLeastOnceaYear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
200
C PeriodicMaintenanceInspections ...........................
203
D RecommendedFluidsandLubricants ........................
205
E MaintenanceRecord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
207
.
.
.
.
.
Have you purchasedthe GM Protection Plan? ThePlan
supplements your new car warranties .
See your GM dealerfor details.
189 ...
Maintenance Schedule
Introduction: A Word about Maintenance
Ne at General Motors wantto help you
Your Vehicle and the
ceep your vehicle in good working
Environment
:ondition. But we don’t know exactly
low you’ll drive it.You may drive very
;hort distances only a few times a week.
3r you may drive long distances all the
:ime in very hot, dusty weather.You may
Jse your vehicle in making deliveries. Or
you may drive it to work, to do errands or
.n many other ways.
Because of all the different ways people
use their GM vehicles, maintenance needs
vary. You may even need more frequent
:becks and replacements than you will
find in the schedules in this part.So
please read this part and note how you
irive. If you have any questions onhow
to keep your vehicle in good condition,
see your Geo dealer, the place many GM
owners choose to have their maintenance
work done. Your dealer can be relied
upon to use proper parts and practices.
. . .I90
Proper vehicle maintenance not only
helps to keep your vehicle in good
working condition, but also helps the
environment. All recommended
maintenance procedures are important.
Improper vehicle maintenance or the
removal of important components can
significantly affect the qualityof the air
we breathe. Improper fluid levelsor even
the wrong tire inflation can increase the
If you are skilled enough to do some
level of emissions from your vehicle.To
help protect our environment, and to help work on your vehicle, you will probably
want to get the service information
keep your vehicle in good condition,
GM publishes. You will find a listof
please maintain your vehicle properly.
publications and how to get them in this
manual. See “Service Publications’’ in
How This Part is Organized
the Index.
The remainder of this part is divided into
“Section B: Owner Checks and Services”
five sections:
tells you what should be checked
“Section A: Scheduled Maintenance
whenever you stop for fuel. It also
Services’’ shows what to have done and explains what you can easily do to help
how often, Some of these services can be keep your vehicle in good condition.
complex, so unless you are technically
qualified and have the necessary
equipment, you should let your dealer’s
service department or another qualified
service centerdo these jobs.
I
“Section C: Periodic Maintenance
Inspections” explains important
inspections that your Geo dealer’s service
department or another qualified service
center should perform.
“Section D: Recommended Fluids and
Lubricants” lists some products GM
recommends to help keep your vehicle
properly maintained. These products, or
their equivalents, should be used whether
you do the work yourself or have it done.
“Section E: Maintenance Record”
provides a place for you to record the
maintenance performed on your vehicle.
Whenever any maintenance is performed,
be sure to write it down in this section.
This will help you determine when your
next maintenance should be done. In
addition, it is a good idea to keep your
maintenance receipts. They may be
needed to qualify your vehicle for
warranty repairs.
Section A: Scheduled
Maintenance Services
Selecting the Risht Schedule
First you’ll need to decide which of the
two schedules is right for your vehicle.
Usins Your Maintenance
Here’s how to decide which schedule to
follow:
Schedules
Schedule I
This section tellsyou the maintenance
services you should have done and when Is any one of these true for your vehicle?
you should schedule them.Your Geo
Most trips are less than 4 miles (6 km).
dealer knows your vehicle best and wants
Most trips are less than 10 miles
you to be happy with it. If you go to your
dealer for your service needs, you’ll know (16 km) when outside temperatures are
below freezing.
that GM-trained and supported service
people will perform the work using
The engine is at low speed most of the
genuine GM parts.
time (as in door-to-door delivery, or in
stop-and-go traffic).
These schedules are for vehicles that:
You operate your vehicle in dusty
0
carry passengers and cargo within
areas.
recommended limits. You will find
these limits on your vehicle’s
Youtow a trailer.
Tire-Loading Information label. See
If any one (or more)of these is true for
“Loading Your Vehicle” in the Index. your driving, follow ScheduleI.
are driven on reasonable road surfaces
Schedule I1
within legal driving limits.
Follow ScheduleI1 & if none of the
use the recommended unleaded fuel.
above conditions is true.
See “Fuel” in the Index.
I
191..
Maintenance Schedule
C
Section A: Scheduled Maintenance Services
Schedule I
\
Follow Schedule I if your vehicle is
MAINLY driven under one or moreof
the following conditions:
When most trips are less than 4 miles
(6 km).
When most trips are less than 10 miles
(16 km) and outside temperatures
remain below freezing.
When most trips include extended
idling and/or frequent low-speed
operation, as in stop-and-go traffic.
When towing a trailer.
When operating in dusty areas.
Schedule I should also be followed if the
vehicle is used for delivery service. police,
taxi or other commercial applications.
*
An Emission Control Service.
t The U S . Environmental Protection Agency
or the California Air Resources Board has
determined that the failure to performthis
maintenance item will notnullify the emission
warranty or limit recall liability prior to the
completion of vehicle useful life. General
Motors, however, urges that all recommended
maintenance services be performed at the
indicated intervals and the maintenance he
recorded in “SectionE: Maintenance Record.”
. . .I92
WHAT TO SERVICE
ITEM
NO.
See “Explanation of Scheduled
Maintenance Services” following
Schedules I and II.
Engine Oil andFilter Change*
1
2
Chassis Lubrication
Tire and Wheel Rotation and Inspection
3
WHEN TO PERFORM
Miles (kilometers) orMonths
(whichever occurssfirst).
-Every 3,750 miles (6 250 km) or6 months.
Every other oil change.
Every 7,500 miles (12 500 km).
At 60,000 miles (100000 km)or 72 months and
then every 7,500 miles (12 500 km) or 12 months.
4
Engine Accessory Drive
5
Cooling System Service*
At 45,000 miles (75 000 km) or 36 months and
then every 30,000 miles(50 000 km) or 24 months.
6
Transaxle Service
See “Explanation of Scheduled Maintenance
Services” following Schedules I and 11.
-
Inspection
7
Spark Plug Replacement*
Air CleanerFilter Replacement*
a
9
Fuel Tank Cap Gasket Replacement*
Fuel Lines and Connections Inspection*?
10
11
Evaporative Emissions Canister Inspection*
12
Valve Clearance Adjustment*
13
Engine Timing Belt Replacement*?
Every 30,000 miles (50 000 km).
See “Explanation of Scheduled Maintenance
Services” following- Schedules I and 11.
Every 60,000 miles(100 000 km) or 72months.
Every 30,000 miles(50 000 km) or 36 months.
Every 60,000 miles (100 000 km) or 72 months.
Every 60,000 miles (100 000 km) or 72 months.
See “Explanation of Scheduled Maintenance
Services” following Schedules I and 11.
193..,
Maintenance Schedule
Section A: Scheduled Maintenance Services(Cont.)
Schedule /I
I
Follow Schedule I1 ONLY if none of
the driving conditions specified in
Schedule I apply.
ITEM
NO.
Miles (kilometers) or Months
(whichever occursjirst).
See “Explanation of Scheduled
Maintenance Services” following
Schedules I and 11.
* An Emission Control Service.
A
7 The US.Environmental Protection Agency
or the California Air ResourcesBoard has
determined that the failure to performthis
maintenance item will not nullify the emission
warranty or limit recall liability prior tothe
completion of vehicle useful life. General
Motors, however, urges that all recommended
maintenance services be performedat the
indicated intervals and the maintenance be
recorded in “SectionE: Maintenance Record.”
WHEN TO PERFORM
WHAT TO SERVICE
Engine Oil and Filter Change*
Every 7,500 miles (12 500 km)or 12 months.
Chassis Lubrication
Every 7,500 miles (12 500 km) or 12 months.
3
Tire and Wheel Rotation and Inspection
At 7,500 miles (12 500 km)and then every
15,000 miles (25 000 km) or asnecessary.
4
Engine Accessory Drive
At 60,000miles (100 000 km) or 72 months and
then every 7,500 miles (12 500 km)or 12 months,
5
Cooling System Service*
Inspection
At 45,000 miles (75 000 km)or 36 months and
then every 30,000miles (50 000 km)or 24 months.
I
See “Explanation of Scheduled Maintenance
Services” following Schedules I and 11.
SDark Plug Reulacement”
I Every 30,000 miles (50 000 km).
Air Cleaner Filter Replacement*
I
See “Explanation of Scheduled.Maintenance
Services” followine Schedules I and 11.
Transaxle Service
I
-
1 -
Fuel Tank CaD Gasket ReIdacement*
. ..I94
w
I Every 60,000miles (100 000 km) or 72 months.
Fuel Lines and Connections Inspection*t
Every 30,000miles (50 000 km) or 36 months.
Evaporative Emissions Canister Inspection*
Every 60,000miles (100 000 km) or 72 months.
Valve Clearance Adjustment*
Every 60,000miles (100 000 km) or 72 months.
~
~
II The
services
shown
at thesameintervals.
on chart
this
up
to 75,000 miles (125 000 km) should
performed
be after
75,000 miles (125 000 km)
1
I
195 ...
Maintenance Schedule
Section A: Scheduled Maintenance Services(Cont.)
ITEM
Explanation of Scheduled
NO. SERVICE
Maintenance Services
Following are explanations of the services
11.
listed in Schedule I and Schedule
The proper fluids and lubricants to use are
listed in SectionD. Make sure whoever
services your vehicle uses these. All parts
should be replaced and all necessary
repairs done beforeyou or anyoneelse
drives the vehicle.
ITEM
NO. SERVICE
1 EngineOilandFilterChange* Always use SH orSG Energy
Conserving I1 oils of proper
viscosity. The “SH” or “SG”
designation may be shown
alone, or in combination with
others, such as “SH/CD,”
“SH, SG, CD,” “SG/CD,” etc.
To determine the preferred
viscosity for your vehicle’s
engine (e.g., SAE 5W-30 or
SAE 10W-30), see “Engine Oil”
in the Index.
* A n Emission Control Service.
.. .I96
2
ChassisLubrication - Lubricate
the transaxle shift linkage,
parking brake cable guides,
underbody contact points and
linkage.
3
TireandWheelRotationand
Inspection - For proper wear and
maximum tire life, rotate your
tires following the instructions
in this manual. See “Tires,
Inspection and Rotation” in the
Index. Check the tires for
uneven wear or damage. If you
see irregular or premature wear,
check the wheel alignment.
Check for damaged wheels also.
Engine Accessory Drive Belt(s1
Inspection - Inspect the belt(s)
for cracks, fraying, wear and
proper tension. Replaceas
needed. (Belts can have many
small cracks in individual ribs
without affecting performance.)
4
ITEM
NO. SERVICE
5 CoolingSystemService* Drain, flush and refill the system
with new or approved recycled
coolant conforming to GM
Specification 1825M. Keep
coolant at the proper mixture
as specified. See “Coolant” in
the Index. This provides proper
freeze and boil protection,
corrosion inhibitor level and
maintains proper engine
operating temperature.
Inspect hoses and replaceif
they are cracked, swollen or
deteriorated. Tighten screwtype hose clamps. Clean the
outside of the radiator and air
conditioning condenser. Wash
the pressure cap and neck.
To help ensure proper operation,
we recommend a pressure test of
both the cooling systemwd the
pressure cap.
I
ITEM
NO.
SERVICE
6
7
TransaxleService - Change
the fluid in the transaxle and
differential every 15,000 miles
(25 000 km) if the vehicle is
mainly driven under one or more
of these conditions:
In heavy city traffic where the
outside temperature regularly
reaches 90°F (32°C) or
higher.
Inhillyormountainous
terrain.
When doing frequent trailer
towing.
Uses such as found in taxi,
police car or delivery service.
If you do not use your vehicle
under any of these conditions,
inspect the fluid every
15,000 miles (25 000 km).
SparkPlugReplacement” Replace spark plugs with the
proper type. See “Replacement
Parts’’ in the Index.
ITEM
NO. SERVICE
ITEM
NO. SERVICE
8
Air Cleaner Filter Replacement*Replace every 30,000 miles
(50 000 km) or moreoften
under dusty conditions. Ask your
dealer for the proper replacement
intervals for your driving
conditions.
9 Fuel Tank Cap Gasket
Replacement” - Replace the
gasket. Make surethe new gasket
is properly installed.
10 Fuel Lines and Connections
Inspection*? - Inspect fuel
lines, connections and tank band
for corrosion, damage, cracksor
loose or leaking connections.
Tighten the connections or
replace the parts as necessary.
Periodic replacementof the fuel
filter is not required.
11 Evaporative Emissions Canister
Inspection” - Inspect for internal
damage or clogging. Clean with
compressed air or replaceif
necessary.
12 Valve Clearance Adjustment” The valve clearance should be
adjusted to factory specifications.
13 Engine Timing Belt
Replacement*? - Replace at
60,000 miles (100 000 km) for
vehicles frequently idled for
extensive periods and/or driven
for long distances at low speed,
such as foundin police, taxi or
door-to-door delivery service.
An Emission Control Service.
b The US.Environmental Protection Agency
or the California Air Resources Board has
determined that the failure to perform this
maintenance item will not nullify the emission
warranty or limit recall liability prior tothe
completion of vehicle useful life. General
Motors, however; urges that all recommended
maintenance services be performed at the
indicated intervals and the maintenance be
recorded in “Section E: Maintenance
Record. ’’
I:
197
...
Maintenance Schedule
Section B: Owner Checks and Services
Listed below are owner checks and services which should be performed at the intervals specified to help ensure the safety,
dependability and emission control performanceof your vehicle. Be sure any necessary repairs are completed at once. Whenever
any fluids or lubricantsare added to your vehicle, make sure they are the proper ones, as shown in Section
D.
At Each Fuel Fill
I
I
I
(It is important foryou or a service station attendantto pertorm these underhood checks at each fuel
fiih)
CHECK
OR SERVICE
WHAT TO DO
Engine Oil Level
Check the engine oil level and add the proper oil
if necessary. See “Engine Oil” in the Index for
further details.
Engine Coolant Level
if necessary. See “Coolant” in
Check the engine coolant level and add the proper coolant mix
the Index for further details.
Fluid Level
Hood Latch Operation
Check the windshield washer fluid level in the windshield washer tank and add the proper if
fluid
necessary. See “Windshield Washer Fluid” in the Index for further details.
Pull the primary hood latch release handle inside the vehicle. The secondary latch should keep
the hood from opening all the way when the primary latch is released. Make sure the hood closes
firmly. See “Hood Release” in the Index for further details.
I
... I 9 8
At least Once a Month
CHECK
OR SERVICE
WHAT TO DO
Tire Inflation
Check tire inflation. Make sure they are inflated to the pressures specified on the Tire-Loading
Information label located on the insideof the glove box door. See “Tires” in the Index for
further details.
Cassette Deck
15 hours of tape play. See “Audio Systems”
Clean cassette deck. Cleaning should be done every
in the Index for further details.
At feast Twice a Year
CHECK
OR SERVICE
Fluid Level Check
WHAT TO DO
Check the power steering pump, hydraulic clutch and automatic or manual transaxle fluid levels
and add as needed. See “Power Steering,” “Hydraulic Clutch” and ‘‘Automatic Transaxle” or
“Manual Transaxle” in the Index. A fluid loss in these systems could indicate a problem. Have
the system inspected and repaired at once.
199 ...
Maintenance Schedule
Section B: Owner Checks and Services (Cont.)
At least Once a Year
CHECK
OR SERVICE
WHAT TO DO
Key Lock Cylinders
Starter Switch
1. Before you start, be sure you have enough room around the vehicle.
2. Firmly apply both the parking brake (see “Parking Brake” in the Index if necessary) and the
regular brake.
NOTE: Do not use the accelerator pedal, andbe ready to turn off theengine immediately if it
starts.
3. On automatic transaxle vehicles,try to start the engine in each gear. The starter should work
only in “P” (Park) or “ N ” (Neutral). If the starter works in any other position, your vehicle
needs service.
On manual transaxle vehicles,put the shift lever in “N” (Neutral), push the clutch down
halfway and try to start the engine. The starter should work only when the clutch
is pushed
down all the way to the floor. If the starter workswhen the clutch isn’t pushedall the way
down, your vehicle needs service.
.. .200
At Least Once a Year (CONI)
WHAT TO DO
Brake Transaxle Shift
Interlock - BTSI
(Automatic Transaxle)
1. Before you start, be sure you have enough room around the vehicle. It should be parked
on a
level surface.
2. Firmly apply the parking brake. (See “Parking Brake”in the Index if necessary).
NOTE: Be ready to apply the regular brake immediately
if the vehicle begins to move.
3. With the engine off, turn the key to the “ON” position, but don’tstart the engine. Without
applying the regular brake, try to move the shift lever of
out“P” (Park) with normal effort.
If the shift lever moves outof “P” (Park) , your vehicle’s BTSI needs service.
~
~~
Steering Column Lock
While parked, and with the parking brake set, try to turn the key “LOCK”
to
in each shift lever
position.
0 With an automatic transaxle, the key should turn to
“LOCK” only when the shift lever is in
“P” (Park).
With a manual transaxle, the key should turn to“LOCK” only if you push the key in farther,
while turning it towards “LOCK.”
201
. ..
Maintenance Schedule
Section B: Owner Checks and Services (Cont.)
At Least Once a Year (CONT.)
CHECK
OR SERVICE
.. .202
WHAT TO DO
Maintenance Schedule
Section C: Periodic Maintenance Inspections
Listed below are inspections and services which should be performed at least twice a year (for instance, each spring and fall).
You should let yourGM dealer’s service department or other qualified service center
do these jobs. Make sure any necessary
repairs are completed at once.
INSPECTION
OR SERVICE
I
WHAT SHOULD BE DONE
Restraint Systems
Now and then, make sure all your belts, buckles, latch plates, retractors, anchorages and
reminder systems are working properly. Look for any loose parts or damage.
If you see anything
that might keep a restraint system from doing its
job, have it repaired.
Steering, Suspension
and Front-Wheel-Drive
Axle Boot and Seal
Inspection
Exhaust System
Inspection
Inspect the front and rear suspension and steering system for damaged, loose or missing parts,
signs of wear, or lack of lubrication. Inspect the power steering lines and hoses for proper
hookup, binding, leaks, cracks, chafing, etc. Clean and then inspect the drive axle boot seals
for damage, tearsor leakage. Replace sealsif necessary.
Inspect the complete exhaust system. Inspect the body near
the exhaust system. Look for broken,
damaged, missing or out-of-position parts as well
as open seams, holes, loose connections, or
other conditions which could cause a heat build-up in the floor or
pancould let exhaust fumes
into the vehicle. See “Engine Exhaust’’ in the Index.
Inspect the throttle linkage for interference or binding, and for damaged
or missing parts.
Replace parts as needed.
Throttle Linkage
Inspection
203. . .
Maintenance Schedule
Section C: Periodic Maintenance Inspections (Cont.)
INSPECTION
OR SERVICE
Brake System
Inspection
WHAT SHOULD BE DONE
Inspect the complete system. Inspect brake lines and hoses for proper hookup, binding, leaks,
cracks, chafing, etc. Inspect disc brake pads for wear and rotors
for surface condition. Also
inspect drum brake linings for wear and cracks. Inspect other brake parts, including drums, wheel
cylinders, calipers, parking brake, etc. Check parking brake adjustment.
You may need to have
your brakes inspected more oftenif your driving habits or conditions result in frequent braking.
to be
NOTE: A low brake fluid level can indicate worn disc brake pads which may need
serviced. Also, if the brake system warning light stays on or comes on, something may be
wrong with the brake system. See “Brake System Warning Light” in the Index. If your vehicle
is equipped with anti-lock brakes and the anti-lock brake system warning light stays on, comes
on or flashes, something may be wrong with the anti-lock brake system. See “Anti-Lock Brake
System Warning Light” in the Index.
Additiunal Service Center Inspection
The inspection listed below should be performed by your Geo dealer’s service department or some other qualified service center.
Make sure any necessary repairs are completed at once.
INSPECTION
OR SERVICE
Insuection
. . ,204
WHAT SHOULD BE DONE
The air bag system should be inspectedby a qualified technicianat 120 months. After 120
months, have the system inspected every24 months.
Maintenance Schedule
Section D: Recommended Fluids & Lubr*icants
NOTE: Fluids and lubricants identified below by name, part number or specification may be obtained from your GM Dealer.
USAGE FLUlDlLUBRlCANT
Engine Oil
Engine Coolant
API service SH or SG Energy ConservingI1 oils of the proper viscosity. The “SH” designation
may be shown alone or in combination with others, such as“SH/CD,” or “SH, SG, CD,”
“SG/CD,” etc. To determine the preferred viscosity for your vehicle’s engine,
see “Engine Oil”
in the Index.
50/50 mixtureof water (preferably distilled) and good quality ethylene glycol base antifreeze
(GM Part No. 1052753 or equivalent) conforming to GM Specification 1825M or approved
recycled coolant conforming to GM Specification 1825M.
Hydraulic Brake Delco-Supreme
11 Brake Fluid (GM Part No. 1052535 or equivalent DOT-3 brake fluid).
System
Hydraulic Clutch Hydraulic Clutch Fluid (GM Part
No. 12345347 or equivalent).
System
Power Steering System Dexrona-IIE Automatic Transmission Fluid.
Manual Transaxle SAE 75W-90 GL-4 (GM Part
No. 12346074 Castrol@ Syntorq GL-4 or equivalent) SAE
or
75W-90 GL-5 Gear Lubricant.
DEXRON@-I11 or DEXRON@-IIE Automatic Transmission Fluid.
Automatic Transaxle
@
Key Lock Cylinders Lubricate with Multi-Purpose Lubricant (GM Part No. 12345120) or synthetic SAE 5W-30
engine oil.
Manual Transaxle Chassis lubricant (GM Part No. 1052497 or equivalent) or lubricant meeting requirements
LB or GC-LB.
Shift Linkage NLGI Grade 2, Category
of
205. .
Maintenance Schedule
Section D: Recommended Fluids & Lubricants (Cont.)
FLUlDlLUBRlCANT
USAGE
Automatic Transaxle
Shift Linkage
Floor Shift Linkage
Clutch Linkage Pivot
Points
Chassis Lubrication
Windshield Washer
Solvent
Hood Latch Assembly
a. Pivots and Spring
Anchor
b. Release Pawl
Body Door Hinge Pins,
Folding Seat, Fuel Door
Hinge, Rear Compartment Lid Hinges
Weatherstrips
Engine oil.
~~~
Engine oil.
Lithium base grease.
Chassis lubricant (GM PartNo. 1052497 or equivalent) or lubricant meeting requirementsof
NLGI Grade 2, Category LB or GC-LB.
GM Optikleen@Washer Solvent (GM Part No. 105 1515) or equivalent.
I
a. Engine oil or Lubriplate Lubricant (GM Part No. 1050109).
b. Chassis lubricant (GM Part No. 1052497 or equivalent) or lubricant meeting requirements
of NLGI Grade 2, CategoryLB or GC-LB.
Engine oil or Lubriplate Lubricant (GM PartNo. 1050109).
Dielectric
Silicone
Part
Grease
(GM
No. equivalent).
12345579
or
See “Replacement Parts”in the Index for recommended replacement filters, valves and spark plugs.
. .,206
I
I
Maintenance Schedule
Section E: Maintenance Record
After the scheduled services are performed, record the date, odometer reading and who performed
the service in the columns
I or Schedule I1
indicated. When completing the Maintenance Performed column, insert the numbers from the Schedule
maintenance charts which correspond to the maintenance performed. Also,
you should retain all maintenance receipts.Your
owner information portfoliois a convenient place to store them.
DATE
ODOMETER
READING
SERVICED BY
MAINTENANCE PERFORMED
207.
I
Maintenance Schedule
Section E: Maintenance Record (Cont.)
~
DATE
.. .208
ODOMETER
READING
SERVICED BY
~
MAINTENANCE PERFORMED
DATE
ODOMETER
READING
SERVICED BY
MAINTENANCE PERFORMED
Maintenance Schedule
Section E: Maintenance Record (Cont.)
DATE
...210
I
ODOMETER
READING
I
I
I
I
I
SERVICED BY
I
I
I
MAINTENANCE
PERFORMED
I
I
DATE
ODOMETER
READING
SERVICED BY
MAINTENANCE PERFORMED
I
211
...
Maintenance Schedule
Section E: Maintenance Record (Cont.)
DATE
..212
ODOMETER
READING
SERVICED BY
MAINTENANCE
PERFORMED
.
Part 8
Customer Assistance Information
~~
H e r e you will find out how
to
contact ChevroleVGeoif you
need assistance. This part also
tells you how to obtain service
publications and howto report
any safety defects
.
Customer Satisfaction Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
214
Customer Assistance for the Hearing or Speech Impaired . . . . . . . . . . . . . . . . . . 214
GM Participation in BBB AUTO LINE .
Alternative
DisputeResolutionProgram .......................................
215
... . 216
Reporting Safety Defects .........................................
ChevroletIGeo Roadside Assistance Program ............................
217
Canadian Roadside Assistance ........................................
217
Courtesy Transportation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
217
Service Publications. . . . . . . .
. . . . . . . . . . . . . . . . . 218
.......
213 . .
Customer Assistance Information
of Canada Customer Assistance Centerin
ChevroletIGeo
Customer Assistance Center
Oshawa by calling 1-800-263-3777
(English) or 1-800-263-7854 (French). In P.O. Box 7047
Troy, MI 48007-7047
Mexico, call (525) 254-3777. In Puerto
Your satisfaction and goodwill are
U.S.
Virgin
Islands,
call
Rico
or
important to your dealer and
Refer to your Warranty and Owner
1-809-763- 13 15.
In all other overseas
ChevroletIGeo. Normally, any concern
Assistance Information bookletfor
with the sales transactionor the operation locations, contact GM North American
addresses of Canadian andGM Overseas
Export Sales in Canada by calling
of your vehicle will be resolvedby your
offices.
1-905-644-4112.
dealer’s Sales or Service Departments.
When contacting ChevroletIGeo, please
Sometimes, however,despite the best
For prompt assistance, please have the
remember that your concern will likely be
intentions of all concerned,
following information available to give
resolved in the dealership, using the
misunderstandings can occur.If your
the Customer Assistance Representative: dealership’s facilities, equipment and
concern has not been resolved to your
personnel. That is.why we suggest you
0 Your name, address, home and
satisfaction, the followingsteps should be
follow Step One first if you have a
business telephone numbers
taken:
0 Vehicle Identification Number (This is concern.
STEP ONE: Discuss your concernwith a
available from the vehicle registration
member of dealership management.
Customer Assistance for the Hearing
or
or title, or the plate at the left topof
Normally, concerns can be quickly
Speech Impaired (TDD)
the instrument paneland visible
resolved at that level.If the matter has
To assist customers who have hearing
through the windshield.)
already been reviewed withthe Sales,
difficulties, ChevroletIGeo has installed
Dealershipnameandlocation
Service, or Parts Manager, contact the
special TDD (Telecommunication
0 Vehicle delivery date and present
owner of the dealershipor the General
Devices for the Deaf) equipment atits
Manager.
mileage
Customer Assistance Center.Any hearing
STEP TWO: If after contactinga
0 Nature of concern
or speech impaired customer who has
member of dealership management, it
access to a TDD or a conventional
We encourage you to call the toll-free
appears your concern cannotbe resolved number listed previously in order to give teletypewriter (TTY) can communicate
by the dealership withoutfurther help,
your inquiry prompt attention. However, with Chevrolet by dialing:
contact the ChevroletIGeo Customer
if you wish to write Chevrolet/Geo, write 1-800-TDD-CHEV (1-800-833-2438)Assistance Centerby calling
(TDD users in Canada can dial
to:
1-800-222- 1020.In Canada, contact GM
1-800-263-3830.)
Customer Satisfaction
Procedure
...214
If you are not satisfied after following the The arbitrator will make a decision which
Customer Satisfaction Procedure, you
you may accept or reject.If you accept
may contact the BBB using the toll-free
the decision, GM will be bound by that
telephone number, or write them atthe
decision. The entire dispute resolution
following address:
procedure should ordinarily take about
forty days fromthe time you file a claim
BBB AUTO LINE
until a decision is made.
Both ChevroletIGeo and your
Council of Better Business Bureaus
ChevroletIGeo dealerare committed to
4200 Wilson Boulevard
Some state laws may require youto use
making sure you are completelysatisfied Suite 800
this program beforefiling a claim witha
with your new vehicle. Ourexperience
Arlington, VA 22203
state-run arbitration programor in the
has shown that, ifa situation arises where Telephone: 1-890-955-5100
courts. For further information, contact
you feel your concern has not been
the BBB at 1-800-955-5100 or the
To file a claim, you will be as;kecJ to
adequately addressed, the Customer
Chevrolet/Geo Customer Assistance
Satisfaction Procedure describedearlier in provide your name and address, your
Center at 1-800-222- 1020.
vehicle identification number (VIN), and
this section is very successful.
*This programmay not be available in
a statement of the natureof your
There may be instances where an
all
states, depending on state law.
complaint. Eligibility is limited by vehicle
impartial third-party can assist inarriving age and mileage, and other factors.
Canadian owners referto your
at a solution to a disagreement regarding
Warranty and Owner Assistance
We prefer you utilizethe Customer
vehicle repairs or interpretation of the
information booklet. General Motors
New Vehicle Limited Warranty.To assist Satisfaction Procedure before you resort
reserves the rightto change eligibility
to AUTO LINE, but you may contact the
in resolving these disagreements
limitations and/orto discontinue its
ChevroletIGeo voluntarily participatesin BBB at any time. The BBB will attempt
participation in this program.
to resolve the complaint serving as an
BBB AUTO LINE.
intermediary between you and
BBB AUTO LINE is an out-of-court
ChevroletIGeo. If this mediation is
program administered bythe Better
unsuccessful, an informal hearing willbe
Business Bureau systemto settle disputes scheduled whereeligible customers may
between customers and automobile
present their case to an impartial
manufacturers. This programis available third-party arbitrator.
free of charge to customerswho currently
own or lease a GM vehicle.
GM Participation in
BBB AUTO LINE Alternative Dispute
Resolution Program
*
215
...
Customer Assistance Information
Reporting Safety
Defects to the United
States Government
If you believe that your vehicle has
a
defect which could causea crash or could
cause injury or death, you should
immediately inform the National
Highway Traffic Safety Administration
(NHTSA), in addition to notifying
General Motors.
If NHTSA receives similar complaints,it
may open an investigation, and if finds
it
that a safety defect existsin a group of
vehicles, it may order a recall and remedy
campaign. However, NHTSA cannot
become involved in individual problems
between you, your dealer,or General
Motors.
To contact NHTSA, you may either call
the Auto Safety Hotline toll-free at
1-800-424-9393 (or 366-0123 in the
Washington, D.C. area) or write to:
NHTSA
U.S. Department of Transportation
Washington, D.C. 20590
You can also obtain other information
about motor vehicle safety fromthe
Hotline.
. ..216
Reporting Safety
Defects to the Canadian
Government
[f you live in Canada, and you believe
that your vehicle hasa safety defect,you
should immediately notify Transport
Canada, in addition to notifying General
Motors of Canada Limited. You may
write to:
Transport Canada
Box 8880
Ottawa, Ontario K1G 352
Reporting Safety
Defects to General
Motors
[n addition to notifying NHTSA (or
Transport Canada) ina situation like this,
we certainly hope you’ll notifyus. Please
call us at 1-800-222- 1020 ,or write:
Chevrolet/Geo
Customer Assistance Center
P.O. Box 7047
Troy, MI 48007-7047
In Canada, pleasecall us at
1-800-263-3777 (English) or
1-800-263-7854 (French).
Or, write:
General Motorsof Canada Limited
Customer Assistance Center
1908 Colonel Sam Drive
Oshawa, Ontario L1H8W
recommended service providers. The
following services are available:
Towing
Locksmith
TireRepair
0 Rental car or taxi
0 Additional services as necessary
The Roadside Assistance Center uses
companies that will provide you with
quality and priority service. When
roadside services are required, our
II Chevrolet/Geo
advisors will explainany payment
obligations that may be incurred for
Roadside Assistance
utilizing outside services.
Program
For prompt assistancewhen calling,
'0enhance Chevrolet/Geo's strong
please have the followingavailable to
Commitment to customer satisfaction,
give to the advisor:
CIhevrolet/Geo is excited to provide the
VehicleIdentificationNumber
ervices of the Chevrolet/Geo Roadside
Pissistance Center.
0 Licenseplatenumber
ELoadside Assistance is available 24 hours
Vehicle color
a day, 365 days a year, by calling
Vehiclelocation
1 -800-CHEW USA (1-800-243-8872).
Telephone number where you can be
'his toll-free number will provide you
reached
0Iver-the-phone roadside assistance with
Vehiclemileage
nninor mechanical problems. If your
Plroblem cannot be resolved over the
Description of problem
Phone, our advisors have access toa
n,ationwidenetwork of dealer
Canadian Roadside
Assistance
Vehicles purchased in CANADA have an
extensive ROADSIDE ASSISTANCE
Program accessible from anywhere in
Canada or the U.S.A. Pleaserefer to the
separate brochure providedby the dealer
or call 1-800-268-6800 for emergency
services.
Courtesy
Transportation
Chevrolet/Geo offers Courtesy
Transportation for customers needing
warranty service. Courtesy Transportation
will be offered in conjunction withthe
coverage providedby the BUMPER TO
BUMPER New Vehicle Limited Warranty
to retail and retail lease purchasers of
1994 Chevrolet/Geo passenger cars and
light-duty trucks.
Courtesy Transportation includes:
0 One-way SHUTTLE RIDE for any
warranty repair completed during the
same day.
Up to $30 maximum daily VEHICLE
RENTAL allowance for any overnight
warranty repair up to 5 days.
OR
217 ...
Customer Assistance Information
Up to $30 maximum daily CAB,
Service Publications
BUS, or OTHER public transportation
Information on how to obtain Product
allowance in lieuof rental for any
Service Publications (PSP’s) and Indexes
overnight warranty repairup to 5
as
described belowis applicable only in
days.
the fifty U.S. states (and the Districtof
OR
Columbia) and onlyfor cars and light
0 Up to $10 daily FUEL allowance for
rides provided by another person (i.e., trucks with GVWR less than 10,OOO
friend, neighbor, etc.) in lieuof rental pounds (4 536 kg).
for any In Canada, information pertaining to
or other public transportation’
can
Product Service Bulletins and Indexes
overnight warranty repairup to 5
be obtained by writing to:
days.
General Motorsof Canada Limited
Note: All Courtesy ’Ransportation
Service Publications Department
arrangements will be administered
by
your Chevrolet/Geo dealership service 1908 Cplonel SamDr.
Oshawg, Ontario L1H 8P7
management. Claim amounts should
reflect all actualcosts.
ChevroletfGeo regularly sendsits dealers
useful service bulletins about
0 Chevrolet/GeoCourtesy
Chevrolet/Geo products. ChevroletfGeo
Transporntion is not part of the
the
BUMPER TO BUMPER New Vehicle monitors product performance in
field. We then prepare bulletinsfor
Limited Warranty. Chevrolet/Geo
reseryes the right to make any changes servicing our products better. Now,you
can get these bulletinstoo.
or discontinue Courtesy
Transportation at any time without
Bulletins cover various subjects. Some
notification.
pertgn to the proper use andcare of your
0 For additional program details, contact vehicle. Some describe costly repairs.
Others d9scribe inexpensiverepairs
your Chevrolet/Geo dealer.
which, if done on time with the latest
In Canada, please consult yourGM
parts,
may avoid futuqe costly repairs.
Dealer for information op courtesy
Some
bulletins tella technician how to
transportation.
0
. ..218
repair a new or unexpected condition.
Others describe a quicker way to fix your
vehicle. They can helpa technician
service your vehicle better.
Most bulletins applyto conditions
affecting a small number of cars or trucks.
Your ChevroletfGeo dealeror a qualified
technician may haveto determine ifa
specific bulletin appliesto your vehicle.
Individual PSP’s
If you don’t want to buy all the PSP’s
issued by ChevroletlGeo for all caror
truck models in the model year, you
can
buy individual PSP’s, suchas those which
may pertain to a particular model.To do
this, you will first needto see our index of
PSP’s. It provides a variety of
information. Here’s what you’ll findin
the index andhow you can get one:
What You’ll Findin the Index:
0 4list of all PSP’s published by
ChevroIetfGeo in a model year (1990
or later). PSP’s covering all models of
ChevroletfGeo cars or light trucks
(less than 10,000 pounds (4 536 kg)
GVWp) are listed in the same index.
0
0
Ordering information so you can buy
the specific PSP’s you may want.
Price information for the PSP’s you
may want to buy.
How You Can Get an Index:
Toll-Free Telephone Number
[f you want an additional ordering form
for an index, just call toll-free and we’ll
be happy to send you one. Automated
recording equipment willtake your name
and mailing address. The numberto call
is 1-800-551-4123.
A VERY IMPORTANT REMINDER:
These PSP’s are meant for technicians.
They are not meantfor the
“do-it-yourselfer.” Technicians havethe
equipment, tools, safety instructions, and
know-how to do a job quickly and safely.
Indexes are published periodically. Most
of the PSP’s which could potentially
apply to the most recent ChevroletIGeo
models willbe listed in the most recent
publication for that model year.This
means you may wantto wait until the end
of the model year before ordering an
index, if you are interested in buying
PSP’s pertaining to a current model year Chevrolet/Geo Service Publications
car or truck.
You can getthese by using theorder
form.
Some PSP’s pertaining to a particular
model year vehicle may be publishedin
later years, and these would be listed in
the later year’s index. When youorder an
index for a model year thatis not over
yet, we’ll send you the most recently
published issue. Check the ordering form
for indexes for earlier model years.
Cut out the ordering form, fill it out, and
mail it in. We will then see toit that an
index is mailed to you. There is no charge
for indexes for the 1990-1994 model
years.
219
...
Customer Assistance Information
1994 CHEVROLET/GEO SERVICE PUBLICATIONS ORDERING INFORMATION
The following publications covering the operation
and servicing of your vehicle can be purchasedby fillingout the Service Publications Order Form
in this book and mailingit with your check, money order credit
or
card information to Helm, Incorporated(address listed below).
CURRENT PUBLICATIONS FOR1994 GEO PRlZM
SERVICE MANUALS
PRODUCT SERVICE PUBLICATIONS
Service Manualshave thediagnosis, repair and overhaul information
Product Service Publications (PSP’s), are bulletins, letters and articles
on engines, transmission,axle, suspension, brakes, electrical, steerpublished for trained dealer service personnel. See Service
Publicaing, body, etc.
tions listed previously in this section.
A cumulative index ispublished
quarterly
during
the
current
model
Number
Form
Model
Price
year. The indexes
list all PSP’s publishedby Chevroletin the modelyear.
1994
Geo
Prizm . . . . . . . . . . . . . . . . . . . ST-373-94
TBA*
NOTE: Please specify special body orengine types on order form.
PSP Index
Write information in the Form Number column.For example: Turbo,
Price
Year
Form
Number
Convertible.
Free
1994 PSPI-94. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
‘Price to be announced at a later date.1-800-7824356
Call
for further information.
1993 PSPI-93. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Free
Free
1990-92PSPI-90-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OWNER’S INFORMATION
Owner publications are written directly
Owners
for and intendedto provide
basic
operational
information
about
the
vehicle. The Owner’s
PSP Bound Bulletin Book (Complete Year Bulletins)
Manual
includes
the
Maintenance
Schedule
for
all models.
NumberForm
Description
Year
1991 All PSP’S . . . . . . . . . . . . . . . . . . . .40.00 PSP-91-4
1994 Geo Prizm Owner’s Manual
1990 All PSP’S . . . . . . . . . . . . . . . . . . . .
PSP-90-4
40.00
In Portfolio:IncludesRMoIio, Owner‘s Manualand Warranty Booklet.
1994
Geo
Prizm
In-Portfolio . . . . . . . . . . . . 10260661 $15.00
For subscription information call Helm, Incorporated.
Without Portfolio: Includes Owner’s Manual.
. . . . . . . I0260664 $10.00
1994
Geo
Prizm
Without
Portfolio
CURRENT & PAST
MODEL
ORDER
FORMS
Addressinquiries
all to:
Service Publications are available for current and past model
Chevrolet/Geo vehicles.To request an order form, please specify year
name
modeland
vehicle.of
1-800-782-4356
For
call:
inquiries
information
and
. .220
HELM, INCORPORATED
PO.Box 07130
Detroit, MI 48207
CHEVROLET/GEO SERVICE PUBLICATIONS ORDER FORM
NOTE: Please complete form below (Print or Type) and MAIL TO:
Post Office Box 07130, Detroit, Michigan 48207
ORDER TOLL FREE
1-800-78214356
(Monday-Friday 8:OO A.M.-6:00 P.M. EST)
PUBLICATION FORM NUMBER
VEHICLE MODEL
ITEM DESCRIPTION
I
Geo ManualService
ST-373-94
10260661
10260664
994
(CUSTOMER
Geo Prizm
%10.00
Geo Prizm 994
(AlTENTION)
$1 1994
1
0
Check or Money
Order payableto
Helm, Inc. (USA
funds only- do not
send cash.)
0MastetCard
Discover
VISA
Card
AREA
DAYTIME TELEPHONE NO. CODE
(STATE)
(
*Prices are subject to change without notice and without incurring obligation.
announc. a laeratem
all 1 . 8 ~ 7 8 2 . ~ 5 6for further ln~,,,,alion.
Orders cannot be returned without prior authorization. A restocking fee may apply.
t t price lo
k
0
Michigan Purchasefs
add 4% sales tax
Handling Charge
(ZIP CODE)
$4.00
Canadian Postage
( S e e Note Below)
-
[ T I
BOX NUMBERS)
NO.)
(APT.
(Crrv)
5.00
TOTAL MATERIAL
0
(STREET ADDRESS-NO
P.O.
TBA**
~
Owner’s Manual In-Portfolio
Owner’s Manual Without-Portfolio
NOTE: Dealers and Companies please provide dealer
or company name, and
also the nameof the personto whose attention the shipment should
be sent.
For purchases outside
U.S.A. please writeto the above address for quotation.
NAME)
I
NAME
I
GRAND TOTAL
mr l
Number:
Account
Expiration
Date molyr:
.
m]
Check here if your billing
address is ditferent from your
shipping address shown.
(CUSTOMER SIGNATURE)
NOTE TO CANADIAN CUSTOMERS:
All listed prices are quoted in U.S. funds. Canadianresidents are to
make checks payable
in U.S.funds. To cover Canadian postage,$1add
1.50plusthe U.S. Handling Charge.
Requests for manualsprinted in French should be directed to Canadian GeneralMotors dealerships.
piwse
tirne for pmal
service.
221
..
Notes
...222
A B S ........................
101
Add-on Electrical Equipment ..... 182
Adding Coolant ................ 157
Additives. Engine Oil ............ 152
.... 18
Adjuster.ShoulderBeltHeight
AirBags ......................
20
How the System Works ........ 22
ReadinessLight .............. 21
Servicing Your Geo with the
............ 24
AirBagSystem
Air Cleaner ....................
153
AirConditionerControls ......... 83
Air Filter Replacement ........... 154
Air Intake Lever . . . . . . . . . . . . . . . . 82
AifflowKnob .................. 82
Alignment and Tire Balance.
174
Wheel ......................
AluminumWheels .............. 179
AM/FM Stereo ................ 86
With Cassette Tape and Compact
DiscPlayer ................ 91
WithCassetteTapePlayer ....... 87
Antenna ......................
96
Anti-LockBrakes .............. 101
SystemActiveLight ........... 76
SystemWarningLight ......... 76
To Use .....................
102
Appearance Care ............... 176
Appearance Care and Materials .... 181
Appearance Care. Service and ..... 143
Ashtray.
Front
.................
Ashtray.Rear ..................
AshtraysandLighter ............
AssistGrips.Passenger ..........
AudioSystems .................
Audio Systems. Comfort
Controlsand . . . .............
AutomaticTransaxle ............
Automatic Transaxle Fluid ........
68 Brakes
68
System Parts. Replacing . . . . . . 162
68
SystemWarningLight
......... 75
68
116
Trailer ......................
85
Wear ......................
161
Braking (Control of a Vehicle) ..... 100
81 Braking in Emergencies .......... 102
47 “Break.In. NewVehicle ........ 44
154 BrightnessControl .............. 59
BulbReplacement .............. 163
Babies. Smaller Children
Back-upLight ............... 168
and(SafetyBelts) ............. 28
Center High-Mounted
Balance. Wheel Alignment
.166
Stoplight ...........
174
andTire ....................
FrontSidemarker ............. 164
Battery .......................
162
Front Turn Signal ............. 164
BBB Auto Line- Alternative Dispute
Headlights .................. 163
Resolution Program.
License Plate Light ............ 168
GM Participation in ......... 215
Parking Lights ............... 165
Before Leaving on a Long Trip .... 110
Rear Combination Lights . . . . . . . 167
Belt.Lap ......................
27 Bulbs. Halogen ................. 163
Belt.Lap-Shoulder .............. 16 Bulbs.Replaoement ............. 186
82
Bi-Level .....................
Blizzard,.If You’re Caught in a ... 113 Canadian Roadside Assistance ... 217
Box. Glove ....................
67 Capacities and Specifications ...... 187
Brakes
Carbon
Monoxide
.............. 54
Adjustment .................. 162 Care
Anti-Lock(ABS) ............. 101
Appearance ................. 176
Fluid .......................
161
Cassette Tape Player .......... 95
MasterCylinder .............. 160
CompactDiscs ............... 96
Parking ..................... 51
SqfetyBelts ................. 178
PedalTravel ................. 162
..
.
223 . .
Index
Cassette Tape and Compact Disc Player.
AM/FMStereowith ........... 91
Cassette TapePlayer. AM/FM
Stereowith .................. 87
Cassette Tape Player.
Care ofYour ................. 95
Cassette Tape. To Play a
AM/FM Stereo with Cassette Tape and
CompactDiscPlayer
. . . . . . . . 92
AM/FM Stereo with Cassette Tape
Player . . . . . . . . . . . . . . . . . . . . 88
Center Passenger Position (Safety
Belts) ...................... 27
Center Rear Seat Position. Securing a
.......... 32
ChildRestraintinthe
Chains.Tire ................... 174
Changing a Flat Tire ............. 134
ChargingSystemLight
.......... 78
CheckEngineLight ............. 78
Checking Things under the Hood . . 147
Checking Your RestraintSystems . . 37
Chemical Paint Spotting . . . . . . . . . . 180
Chevrolet/Geo Roadside
Assistance
Program
...
. . . 217
Restraints
Child
......
. 29
CenterRearSeat . . . . . . . . . . 32
RearOutsidePosition . . . . . . . . . . 30
RightFrontSeat . . . . . . . . . . . . . . 33
TopStrap . . . . . . . . . . . . . . . . . . . 30
WheretoPutthe . . . . . . . . . . . . . . 29
Children(SafetyBelts) . . . . . . . . . . . 28
...224
Children.Larger(SafetyBelts)
.... 35
CigaretteLighter . . . . . . . . . . . . . . . 69
Circuit Breakers. Fuses and . . . . . . . 183
CityDriving . . . . . . . . . . . . . . . . . . . 108
Cleaner.Air . . . . . . . . . . . . . . . . . . . 153
Cleaning
AluminumWheels . . . . . . . . . . . . 179
Fabric ......................
177
Glass . . . . . . . . . . . . . . . . . . . . . . . 178
Inside of Your Geo . . . . . . . . . . . . 176
Instrument Panel. Top of . . . . . . . 178
Leather . . . . . . . . . . . . . . . . . . . . . 178
Outside ofYour Geo . . . . . . . . . . 179
Problems.Special . . . . . . . . . . . . . 177
Tires .......................
180
Vinyl .......................
178
Windshield and Wiper Blades . . . 179
Clock.Settingthe . . . . . . . . . . . . . . . 86
Clutch.Hydraulic . . . . . . . . . . . . . . . 156
ComfortControls . . . . . . . . . . . . . . . 82
Comfort Controls and Audio
81
Systems ....................
CompactDisc.ToPlaya
. . . . . . . . . 93
Compact Disc Player. AM/FM
StereowithCassetteTapeand
... 91
Compact Discs. Care of Your . . . . . . 96
Compact Spare Tire . . . . . . . . . . . . . 141
Compartments.Storageand . . . . . . . 66
ConsoleStorageArea
. . . . . . . . . . . 66
'2ontrol of a Vehicle . . . . . . . . . . . . . 100
Zontrol.Loss of . . . . . . . . . . . . . . . . 105
Controls
AirConditioner .............. 83
Brightness .................. 59
Comfort .................... 82
Featuresand . . . . . . . . . . . . . . . . . 39
82
Heater ......................
Seat ........................ 8
ConvexOutsideMirror .......... 64
Coolant
Adding . . . . . . . . . . . . . . . . . . . . . 157
Engine . . . . . . . . . . . . . . . . . . . . . 156
How to Add to the Coolant
RecoveryTdnk ............. 130
How to Add to the Radiator ..... 132
TemperatureGage.Engine ...... 77
Cooling . . . . . . . . . . . . . . . . . . . . . . . 83
Cooling
System
..........
. . 129
Courtesy Transportation . . . . . . . . . . 217
CruiseControl . . . . . . . . . . . . . . . . . 61
Passing Another Vehicle
WhileUsing ............... 62
To EraseSpeedMemory ....... 62
To GetOut of ................ 62
To Increase Speed While Using . . 62
To ReduceSpeedWhileUsing
. 62
ToResumeaSetSpeed
. . . . . . . . 62
ToSet ......................
61
UsingonHills
. . . . . . . . . . . . . . . 62
Cupholder . . . . . . . . . . . . . . . . . . . . . 66
Curves. Driving on .............. 102
.
Driving
Customer Assistance for the Hearing
AtNight ....................
106
orSpeechImpaired(TDD)
. . . . . 214
City . . . . . . . . . . . . . . . . . . . . . . . . 108
Customer Assistance Information . . 2 13
Defensive . . . . . . . . . . . . . . . . . . . 98
Customer Satisfaction Procedure . . . 214
98
Drunken ....................
109
Freeway ....................
D e e p Standing Water.
Drivingthrough . . . . . . . . . . . . . . 46
IntheRain . . . . . . . . . . . . . . . . . . 107
Defects. Safety
OnCurves . . . . . . . . . . . . . . . . . . 102
OnSnoworIce
. . . . . . . . . . . . . . 112
Reporting to General Motors . . . . 2 16
ThroughDeepStandingWater ... 46
Reporting to the Canadian
Winter . . . . . . . . . . . . . . . . . . . . . . 112
Government . . . . . . . . . . . . . . . 216
With a Trailer . . . . . . . . . . . . . . . . 117
Reporting to the United States
. . . . . . . . . . . . . . . 98
Drunken
Driving
Government . . . . . . . . . . . . . . . 216
DefensiveDriving . . . . . . . . . . . . . . 98
Defogger.RearWindow
. . . . . . . . . 84 Electrical Equipment, Add-on . . . 182
Defogging and Defrosting
. . . . . . . . . . 64
ElectricMirrorControl
Windows . . . . . . . . . . . . . . . . . . . 83 Emergencies,Braking in . . . . . . . . . 102
Dehumidifying . . . . . . . . . . . . . . . . . 83 Emergencies,Steering in ......... 103
Dimensions.Vehicle . . . . . . . . . . . . 188 Engine
Compartment Fuse Block . . . . . . . 184
Doing Your Own Service Work . . . . 144
Compartment Relay Block . . . . . . 185
Dome
Light . . . . . . . . . . . . . . . . . . . 58
DoorLocks ....................
41
Coolant . . . . . . . . . . . . . . . . . . . . . 156
DoorLocks.Power
CoolantTemperatureGage
. . . . . . . . . . . . . 42
. . . . . 77
54
Exhaust .....................
. . . . . . 66
DoorStorageCompartments
Identification . . . . . . . . . . . . . . . . 182
DoorWarningLight . . . . . . . . . . . . . 79
. . . . . 16 Oil ........................
150
DriverPosition(SafetyBelts)
Driver Side Instrument Panel Fuse
OilPressureLight
. . . . . . . . . . . . 77
Block ......................
Overheating . . . . . . . . . . . . . . . . . 128
184
Specifications . . . . . . . . . . . . . . . . 187
Starting Your . . . . . . . . . . . . . . . . 45
Environment. Your Vehicle
and the .....................
Exhaust.Engine . . . . . . . . . . . . . . . .
Explanation of Scheduled
MaintenanceServices . . . . . . . . .
Extender.SafetyBelt . . . . . . . . . . . .
190
54
196
37
F a b r i c Protection . . . . . . . . . . . . . . 177
Fan Knob .....................
82
FeaturesandControls
. . . . . . . . . . . 39
Filling YourTank . . . . . . . . . . . . . . . 146
Filter.Air.Replacement . . . . . . . . . . 154
FinishCare(Paint) . . . . . . . . . . . . . . 179
FinishDamage(Paint) . . . . . . . . . . . 180
Flash-to-Pass . . . . . . . . . . . . . . . . . . 58
Flashers.HazardWarning
. . . . . . . . 120
FlatTire. Changing a . . . . . . . . . . . . 134
Flat. If a Tire Goes . . . . . . . . . . . . . . 134
Flow-ThroughVentilationSystem . . 84
Fluid
AutomaticTransaxle . . . . . . . . . . 154
161
Brake ......................
ManualTransaxle . . . . . . . . . . . . . 155
PowerSteering . . . . . . . . . . . . . . . 158
Recommended . . . . . . . . . . . . . . . 205
WindshieldWasher . . . . . . . . . . . 159
FoldingSeatback.Rear
. . . . . . . . . . 10
ForeignCountries.Fuels in . . . . . . . 145
Foreign Material Paint Damage . . . . 180
FreewayDriving . . . . . . . . . . . . . 109
225
...
Headlight Highbow Beam ....... 58
HeaterControls ................ 82
Heating ....................... 82
. . . . 18
HeightAdjuster.ShoulderBelt
HighwayHypnosis .............. 110
Hill and Mountain Roads . . . . . . . . . 111
Hitches ....................... 116
Hood Release . . . . . . . . . . . . . . . . . . 147
Hood. Checking Things under the . . 147
Hook.Ups.FrontTowing . . . . . . . . . 126
Hook.Ups. RearTowing ......... 127
Horn . . . . . . . . . . . . . . . . . . . . . . . . . 56
How to Add Coolant to the
CoolantRecoveryTank . . . . . . . . 130
How to Add Coolant to the
132
Radiator ....................
Hydraulic
Clutch
...............
156
Gages
EngineCoolantTemperature .... 77 Hydroplaning . . . . . . . . . . . . . . . . . . 108
Fuel .......................
74 Hypnosis.Highway . . . . . . . . . . . . . 110
WarningLightsandIndicators . . . 74
GasolinesforCleaner Air ........ 145 ldentification Number. Vehicle . . . . 182
Glass (Cleaning) . . . . . . . . . . . . . . . . 178 Identification.Engine . . . . . . . . . . . . 182
GloveBox .................... 67 If a Tire Goes Flat . . . . . . . . . . . . . . 134
If You’re Stuck: In Sand. Mud. Ice
GM Participation in EBB Auto Lineor Snow ....................
141
Alternative Dispute Resolution
Program . . . . . . . . . . . . . . . . . . 215 IgnitionSwitch . . . . . . . . . . . . . . . . . 44
. . . . . . . . . . 68 Inflation - Tire Pressure . . . . . . . . . . 171
Grips.PassengerAssist
Inside Daymight Rearview
63
Mirror ......................
H a l o g e n Bulbs . . . . . . . . . . . . . . . 163
HazardWarningFlashers ......... 120 InstrumentCluster . . . . . . . . . . . . . . 72
Head
Restraints
. . . . . . . . . . . . . . . . 10 InstrumentPanel . . . . . . . . . . . . . . . 71
Front
Ashtray . . . . . . . . . . . . . . . . . . . 68
8
Seat ........................
.......... 9
Seatbacks.
Reclining
TowingHook-ups . . . . . . . . . . . . . 126
Fuel ......................... 145
FuelGage ..................... 74
Fuels in Foreign Countries ........ 145
Fuse Block
Driver Side Instrument Panel . . . . 184
EngineCompartment .......... 184
Engine Compartment Relay
Block . . . . . . . . . . . . . . . . . . . . 185
Passenger Side Kick Panel ...... 185
....... 183
FusesandCircuitBreakers
... 226
Instrument Panel. Cleaning the
Topof .....................
178
InteriorLights ................. 58
. . . . . . . . . . . . . . . 121
....................... 40
J u m p Starting
Keys
Label. Service Parts
. . 182
Identification .......
Lane Change Indicator.
Turn Signal
and
. . . . . ...... 57
LapBelt(SafetyBelts) ........... 27
Lap-ShoulderBelt(SafetyBelts) . . . 16
LargerChildren(SafetyBelts) ..... 35
Leaving YourVehicle ............ 42
Leaving Your Vehicle with the
EngineRunning .............. 52
Lighter.Ashtraysand . . . . . . . . . . . . 68
Lighter.Cigarette ............... 69
Lights
............ 21
AirBagReadiness
Anti-Lock Brake System
..76
Active ..............
Anti-Lock Brake System
Warning .................. 76
BrakeSystemWarning ......... 75
BulbReplacement . . . . . . . . . . . . 186
ChargingSystem . . . . . . . . . . . . . 78
CheckEngine . . . . . . . . . . . . . . . . 78
Dome ...................... 58
Manual
AdjustMirror ................ 64
Transaxle . . . . . . . . . . . . . . . . . . . 49
Transaxle Fluid . . . . . . . . . . . . . . . 155
Windows . . . . . . . . . . . . . . . . . . . 55
MasterCylinder.Brake . . . . . . . . . . 160
Mirrors
Control.Electric . . . . . . . . . . . . . . 64
ConvexOutside . . . . . . . . . . . . . . 64
Inside Daymight Rearview . . . . . 63
ManualAdjust . . . . . . . . . . . . . . . 64
VisorVanity . . . . . . . . . . . . . . . . . 67
Mountain Roads. Hill and . . . . . . . . 111
Lights
DoorWarning ................ 79
EngineOilPressure . . . . . . . . . . . 77
GagesandIndicators.Warning
. . 74
Interior ..................... 58
MalfunctionIndicatorLamp
.... 78
Operation of . . . . . . . . . . . . . . . . . 57
Overdrive Off . . . . . . . . . . . . . . . . 79
59
Reading ....................
RearWindowDefogger . . . . . . . . 79
SafetyBeltReminder . . . . . . . . . . 15
Lights On Reminder . . . . . . . . . . . . . 58
Loading YourVehicle . . . . . . . . . . . 169
........ 42
Lock.RearDoorSecurity
Locks.Door . . . . . . . . . . . . . . . . . . . 41
. . . . . . . . . . . . . 42
Locks.PowerDoor
LossofControl ................ 105
Lubricants.Recommended . . . . . . . 205
N e w Vehicle “Break-In” . . . . . . . 44
NightDriving . . . . . . . . . . . . . . . . . . 106
NightVision . . . . . . . . . . . . . . . . . . . 106
Nuts.Wheel . . . . . . . . . . . . . . . . . . . 187
Maintenance
Inspections.Periodic . . . . . . . . 203
Record . . . . . . . . . . . . . . . . . . . . . 207
Schedule . . . . . . . . . . . . . . . . . . . . 189
Services.Scheduled . . . . . . . . . . . 192
Underbody . . . . . . . . . . . . . . . . . . 180
When Trailer Towing . . . . . . . . . . 118
Malfunction
Indicator
Lamp
. . . 78
Odometer. Speedometerand . . . . .
Odometer.Trip . . . . . . . . . . . . . . . . .
Off-RoadRecovery . . . . . . . . . . . . .
Oil.Engine . . . . . . . . . . . . . . . . . . . .
Operation of Lights .............
Overdrive OffLight .............
Overheating.Engine . . . . . . . . . . . .
Owner Checks and Services .......
72
73
104
150
57
79
128
198
P
(Park). Shiftinginto . . . . . . . . . .
P (Park). Shifting out of . . . . . . . . . .
52
52
Paint
ChemicalSpotting . . . . . . . . . . . . 180
FinishCare .................. 179
FinishDamage ............... 180
Foreign Material .............. 180
Parking
Brake ......................
51
On Hills(TrailerTowing) . . . . . . 118
OverThingsThat Bum . . . . . . . . 53
YourVehicle ................. 53
Parts. Replacement .............. 187
PassengerAssistGrips ........... 68
PassengerPositions(SafetyBelts) . . 25
27
Center ......................
RearSeat . . . . . . . . . . . . . . . . . . . 25
RearSeatOutside . . . . . . . . . . . . . 25
Right Front . . . . . . . . . . . . . . . . . . 25
Passenger Side Kick Panel Fuse
185
Block ......................
Passengers. Rear Seat
(Safety Belts) . . . . . . . . . . . . . . . . 25
104
Passing .......................
PedalTravel.Brake ............. 162
Periodic Maintenance Inspections . . 203
Power
DoorLocks . . . . . . . . . . . . . . . . . . 42
Steering . . . . . . . . . . . . . . . . . . . . 102
Steering Fluid . . . . . . . . . . . . . . . . 158
Windows . . . . . . . . . . . . . . . . . . . 55
Pregnancy. Safety Belt Use
during . . . . . . . . . . . . . .
. 24
227
..
Index
Pressure Cap. Radiator ........... 158 Rear
TowingHook-Ups ............ 127
Problems on theRoad ........... 119
WindowDefogger ............ 84
Publications. Service ............ 2 18
WindowDefoggerLight
. . . . . . . 79
Rearview Mirror. Inside
Questions Many People Ask about
Daymight ................... 63
Safety Belts - and the Answers.
........ 9
Here are .................. 15 RecliningFrontSeatbacks
Recommended Fluids
andLubricants . . . . . . . . . . . . . . . 205
Radiator Pressure Cap .......... 158
Radiator. How to Add Coolant
Recovery Hooks. Using the . . . . . . . 142
to the .......................
132 Recovery.Off-Road . . . . . . . . . . . . . 104
RadioReception.Understanding . . . 95 Release
Radio. To Play the
147
Hood .......................
AM/FMStereo ............... 86
TrunkLock . . . . . . . . . . . . . . . . . . 43
AM/FM Stereo with Cassette Tape and
.......... 43
TrunkLock.Remote
CompactDiscPlayer ........ 91 ReminderLight.SafetyBelt
. . . . . . 15
AM/FM Stereo with Cassette
Reminder.LightsOn
. . . . . . . . . . . . 58
............... 87 RemoteTrunkLockRelease . . . . . . 43
Tape
Player
Rain. Driving in the ............. 107 Replacement
Rainy Weather Tips. Some Other ... 108
Air Filter ....................154
ReadingLight .................. 59
Bulbs (Part Numbers) .......... 186
Rear
Bulbs (Service) . . . . . . . . . . . . . . . 163
Ashtray . . . . . . . . . . . . . . . . . . . 68
187
Parts .......................
DoorSecurityLock
. . . . . . . . . . . 42 Wheel ......................
174
FoldingSeatback ............. 10
Wheels.Used . . . . . . . . . . . . . . . . 174
Outside Position. Securing a Child
ReplacingBrakeSystemParts ..... 162
Restraint in the ............ 30 Replacing Safety Belts after
a Crash .....................
Seat Outside Passenger Positions
37
(SafetyBelts) . . . . . . . . . . . . . . 25 Reporting Safety Defects . . . . . . . . . 216
SeatPassengers(SafetyBelts) ... 25 Restraint System. Supplemental
(Air Bags) . . . . . . . . . . . . . . . . . . . 20
RestraintSystems.Seatsand
...... 7
...228
Restraints
Checking Your System ......... 37
29
Child .......................
Head ....................... 10
WheretoPutthe . . . . . . . . . . . . 29
Right Front Passenger Position
(SafetyBelts) ................ 25
Right Front Seat. Securinga Child
Restraint in the ............... 33
Road. Problems on the ........... 119
....... 97
Road.YourDrivingandthe
. . . . . . . . 111
Roads.HillandMountain
Roadside Assistance. Canadian .... 217
Roadside Assistance Program.
Chevrolet/Geo ............... 217
Rocking Your Vehicle to Get
142
ItOut ......................
Rotation.Tire .................. 172
Running Your Engine while
You’reParked . . . . . . . . . . . . . . . . 54
Safety Belts
. . . . . 16
Adults . . . . . . . . . . .
. . . . . . . . . . . . . . 20
AirBagSystem
Care of ..................... 178
Children .................... 28
Extender . . . . . . . . . . . . . . . . . . . . 37
How to Wear Properly . . . . . . . . . 16
27
Lap ........................
Lap-Shoulder ................ 16
LargerChildren .............. 35
Safety Belts
......... 15
QuestionsPeopleAsk
Reminder
Light .............. 15
Replacing after aCrash ........ 37
SmallerChildrenandBabies . . . . 28
They’reforEveryone .......... 11
. . . . . . . . . 24
UseduringPregnancy
WhyThey Work .............. 12
Safety Defects
Reporting to General Motors .... 2 16
Reporting to the Canadian
Government . . . . . . . . . . . . . . . 2 16
Reporting to the United States
Government . . . . . . . . . . . . . . . 216
SafetyWarningsandSymbols
..... 4
Schedule.Maintenance . . . . . . . . . . 189
Scheduled Maintenance Services ... 192
Scheduled Maintenance Services.
Explanation of . . . . . . . . . . . . . . . 196
............ 8
SeatCushion.Tilting
Seatback.RearFolding
.......... 10
Seatback.
Reclining
Front
........ 9
Seats
And RestraintSystems . . . . . . . . . 7
............ 8
And
Seat
Controls
Front .......................
8
Securing a Child Restraint
Center
Rear
Seat
......
. 32
RearOutsidePosition . . . . . . . . . . 30
RightFrontSeat . . . . . . . . . . . . . . 33
SecurityLock.RearDoor
. . . . . . . . 42
Service ....................... 144
and Appearance Care .......... 143
Parts Identification Label ....... 182
Publications . . . . . . . . . . . . . . . . . 218
Publications Ordering Information.
Chevrolet/Geo . . . . . . . . . . . . . 220
Work.DoingYourOwn ........ 144
Servicing Your Geo with the Air Bag
System . . . . . . . . . . . . . . . . . . . . . 24
SettingtheClock . . . . . . . . . . . . . . . 86
SheetMetalDamage . . . . . . . . . . . . 180
ShiftSpeeds . . . . . . . . . . . . . . . . . . . 50
Shiftinginto P (Park) . . . . . . . . . . . . 52
Shiftingout of P (Park) .......... 52
ShoulderBeltHeightAdjuster ..... 18
Skidding ...................... 105
Smaller Children and Babies
(SafetyBelts) . . . . . . . . . . . . . . . . 28
Snow or Ice. Driving on .......... 112
Spare Tire. Compact . . . . . . . . . . . . . 14 1
Speakers. Adjusting the
AM/FM Stereo . . . . . . . . . . . . . . . 87
AM/FM Stereo with Cassette Tape and
CompactDiscPlayer . . . . . . . . 92
AMPM Stereo with Cassette
TapePlayer . . . . . . . . . . . . . . . . 88
Specifications.Capacitiesand . . . . . 187
SpeedometerandOdometer ....... 72
Starting Your Engine . . . . . . . . . . . . 45
Starting.Jump . . . . . . . . . . . . . . . . . 121
Steam Coming fromYour Engine.
If There Is . . . . . . . . . . . . . . . . . . . 128
Steam. If There Is No . . . . . . . . . . . . 129
Steering ...................... 102
Fluid.Power ................. 158
In Emergencies ............... 103
Power ......................
102
Tips ........................ 102
Storage
Area.Console . . . . . . . . . . . . . . . . 66
Compartments . . . . . . . . . . . . . . . 66
Compartments.Door . . . . . . . . . . 66
Vehicle . . . . . . . . . . . . . . . . . . . . . 162
Stuck: In Sand. Mud. Ice or Snow . . 141
SunVisors . . . . . . . . . . . . . . . . . . . . 67
Sunroof ....................... 64
Supplemental Restraint System
(AirBags) . . . . . . . . . . . . . . . . . . . 20
Switch.Ignition . . . . . . . . . . . . . . . . 44
Symbols.SafetyWarningsand
.... 4
Symbols.
Vehicle . . . . . . . . . . . . . . . 5
Tachometer . . . . . . . . . . . . . . . . . . 73
Tank. Filling Your .............. 146
TemperatureKnob .............. 82
Theft ..........................
44
Theft Deterrent Feature
AM/FM Stereo with Cassette Tape and
CompactDiscPlayer . . . . . . . . 93
AM/FM Stereo with Cassette Tape
Player ....................
89
229
..
Thermostat ....................
158
TiltWheel .....................
56
TiltingSeatCushion ............. 8
Tips.Steering .................. 102
Tips.Ventilation ................ 85
Tire Loading ................... 169
Tires .........................
170
Balance. Wheel Alignment and . . 174
BuyingNew ................. 173
Chains .....................
174
Changing a Flat .............. 134
Cleaning ....................
180
Inflation Pressure ............. 17 1
Inspection and Rotation ........ 172
TemperatureGrades ........... 173
TractionGrades .............. 173
Treadwear ................... 173
Uniform Quality Grading ....... 173
When It’s Time for New ....... 172
Tone. Setting the
AM/FMStereo ............... 87
AM/” Stereo with Cassette Tape and
CompactDiscPlayer ........ 91
AM/FM Stereo with Cassette Tape
88
Player ....................
Top Strap (ChildRestraints) ....... 30
Towing
A Trailer ....................
1 14
FrontHook-Ups .............. 126
RearHook-Ups .............. 127
YourVehicle ................. 124
Trailer Brakes .................. 116
0
0
m
230
Trailer.
Towing a ...
....
. . 114
Transaxle
Automatic ................... 47
Fluid.Automatic ............. 154
Fluid.Manual ................ 155
Manual .....................
49
Transportation. Courtesy ......... 217
TripOdometer ................. 73
Trip. Before Leaving on a Long .... 110
TrunkLockRelease ............. 43
TrunkLockRelease.Remote
...... 43
Turn Signal and Lane Change
Indicator ....................
57
Turn Signalbights Control/Headlight
BeamLever ................. 56
Underbody Maintenance .......
UnderstandingRadioReception
...
Uniform Tire Quality Grading .....
Used Oil. What to Do With .......
Used Replacement Wheels ........
UsingtheRecoveryHooks
.......
180
95
173
152
174
142
Vehicle
Control of a ................. 100
Damage
Warnings
............ 5
Dimensions ................. 188
Environment and Your ......... 190
Identification Number (VIN) .... 182
Leaving Your ................ 42
Loading Your ................ 169
Parking Your . . . . .
. . 53
Vehicle
Rocking .....................
142
Storage ..................... 162
Symbols ....................
5
TowingYour ................. 124
WashingYour ................ 179
Ventilation .................... 83
Ventilation System.
Flow-Through ............... 84
Ventilation
Tips ................ 85
Vision,.Night .................. 106
VisorVanity Mirrors ............ 67
Visors.Sun ....................
67
Warning
Devices.Other ............... 120
HazardFlashers .............. 120
Lights.GagesandIndicators
.... 74
Safety ......................
4
Vehicle
Damage
.............. 5
WasherFluid.Windshield ........ 159
Washers.Windshield ............ 60
WashingYourVehicle
........... 179
Water. Driving Through
DeepStanding ............... 46
Weatherstrips .................. 180
Weightof the Trailer ............ 115
Wheel Nut Torque .............. 187
.
Wheels
AlignmentandTireBalance . . . . 174
Aluminum . . . . . . . . . . . . . . . . . . 179
Replacement . . . . . . . . . . . . . . . . . 174
Tilt . . . . . . . . . . . . . . . . . . . . . . . . 56
UsedReplacement . . . . . . . . . . . . 174
Where to Put the Restraint
(Child Restraints) . . . . . . . . . . . . . 29
Why Safety Belts Work . . . . . . . . . . 12
55
Windows .....................
Defogging and Defrosting ...... 83
Manual .....................
55
Power ......................
55
RearDefogger . . . . . . . . . . . . . . . 84
Windshield
Cleaning . . . . . . . . . . . . . . . . . . . 79
WasherFluid . . . . . . . . . . . . . . . . 59
Washers ....................
60
WipermasherLever . . . . . . . . . . 59
Winter Driving ................. 112
WipermasherLever.Windshield . . 59
Your Driving and the Road
......
97
231
...
Service Station Information
Hood Release
The Delco Freedoms battery needs
no water. See Page 162
Windshield Washer
Fluid Reservoir
Oil Engine
Reservoir
System
Cooling
Check and add coolant
at the coolant recovery bottle.
eenbe shouldfluid The
“FULL” and “LOW” marks.
Dipstick
Oil
Engine
Capacity 13.2 U.S. Gal. (50 L).
Use unleaded gas only,
87 octane or higher.
Cold Tire Pressure
Spare Tire Pressure
Spare: Compact
60
glove
See Tire-Loading Informat:ion label
on the
box door.
WE SUPPORT
VOLUNTARY TECHNICIAN
CERTIFICATION THROUGH
National Institute for
AUTOMOTIVE
SERVICE
EXCELLENCE

advertisement

Related manuals

Download PDF

advertisement