- No category
advertisement
Truck Tires RV Tires Commercial Light Truck Tires Retreads
MICHELIN
®
Truck Tire Data Book
RV Tires • Commercial Light Truck Tires • Truck Tires • Retreads
To learn more please contact your MICHELIN Sales Representative or visit
www.michelintruck.com
To order more books, please call Promotional Fulfillment Center
1-800-677-3322, Option #2
Monday through Friday, 9 a.m. to 5 p.m. Eastern Time
United States
Michelin North America, Inc.
One Parkway South
Greenville, SC • 29615
1-888-622-2306
Canada
Michelin North America (Canada), Inc.
2500 Daniel Johnson, Suite 500
Laval, Quebec H7T 2P6
1-888-871-4444
Mexico
Industrias Michelin, S.A. de C.V.
Av. 5 de febrero No. 2113-A
Fracc. Industrial Benito Juarez
7 6120, Querétaro, Qro. Mexico
011 52 442 296 1600
An Equal Opportunity Employer
Copyright © 2011 Michelin North America, Inc. All rights reserved.
The Michelin Man is a registered trademark owned by Michelin North America, Inc.
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
MWL40731 (09/11)
MICHELIN
®
Data Book
Truck Tire
September 2011
14th Edition
If you require information for MICHELIN
®
products not listed in this data book, please contact your MICHELIN representative or your MICHELIN dealer.
Load and inflation industry standards are in a constant state of change.
Michelin continually updates its product information to reflect these changes.
Therefore, printed material may not reflect the current load and inflation information.
Always refer to the tire sidewall markings for maximum load and pressure information.
Never exceed the wheel manufacturer’s maximum pressure limitation.
TABLE OF CONTENTS
Mounting and Safety Instructions
Part 1: Safety - Mounting the Tire . . . . . . . . . . . . . . . . . . . . 2 - 3
Part 2: Mounting and Demounting Tubeless Tires . . . . . 3 - 6
Part 3: Mounting and Demounting Tube-Type Tires . . . 6 - 8
RV TIRES
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 15
RV Tire Reference Chart . . . . . . . . . . . . . . . . 10
MICHELIN ® Inflation Charts for RV Usage Only. . . 11 - 14
Wheel Diameter - 16" . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Wheel Diameter - 17.5" . . . . . . . . . . . . . . . . . . . . . . . . . 12
Wheel Diameter - 19.5" . . . . . . . . . . . . . . . . . . . . . 12 - 13
Wheel Diameter - 22.5" . . . . . . . . . . . . . . . . . . . . . 13 - 14
Wheel Diameter - 24.5" . . . . . . . . . . . . . . . . . . . . . . . . . 14
RV Front Axle Overload . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
COMMERCIAL LIGHT TRUCK TIRES
MICHELIN ® Commercial Light Truck Tire
Reference Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 - 18
MICHELIN ® Commercial Light Truck Tire Warranty . . . 18
A/S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
M/S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
LTX ® M/S2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
LTX ® A/T2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
XPS RIB ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
XPS TRACTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Inflation Charts for Light Truck Tires . . . . 22
Wheel Diameter - 16" . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Wheel Diameter - 17" . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
X One ® XZY ® 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
X One ® XZU ® S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
XZU ® S2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
X Coach XZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
DRIVE TIRES
ENERGY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
X One ® XDN ® 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
XDA ® 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
XDA3 ® / XD2 ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
ENERGY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
2 GRIP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
X MultiWay XD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
XDE ® M/S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
XDE ® 2+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
XDY-2 ™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
XDY-EX2 ™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
. . . . . . . . . . . . . . . . . . . . . . . . . 54
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
TRUCK TIRES
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 - 72
Tread Pattern Designations. . . . . . . . . . . . . . . . . . . . . . . . . . 24
Tire Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Product Segmentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
MICHELIN ® Truck Tire Reference Chart . . . . . . . . . . 26 - 32
MICHELIN ® Product Availability . . . . . . . . . . . . . . . . . 33 - 36
STEER/ALL-POSITION TIRES
Evertread ™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
XZA ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37, 41
XZA2 ® Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
-1+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
XZE ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
XZE2 ™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
XZE2 ™ / XZE2+ ™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
TRAILER TIRES
X One ® XTA ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
X One ® XTE ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
XTA ® ENERGY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
XTA ® 2 ENERGY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
XTE ® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
SPECIALTY TIRES
XZA ® 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
XZL ™ + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
XML ™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
i
ii
® Inflation Charts for Truck Tires . . . . 64 - 72
Wheel Diameter - 15" . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Wheel Diameter - 16" . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Wheel Diameter - 17.5" . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Wheel Diameter - 19.5" . . . . . . . . . . . . . . . . . . . . . . 65 - 66
Wheel Diameter - 20" . . . . . . . . . . . . . . . . . . . . . . . 66 - 67
Wheel Diameter - 20.5" . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Wheel Diameter - 21" . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Wheel Diameter - 22.5" . . . . . . . . . . . . . . . . . . . . . . 68 - 71
Wheel Diameter - 24" . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Wheel Diameter - 24.5" . . . . . . . . . . . . . . . . . . . . . . . . . 72
RETREAD PRODUCTS
. . . . . . . . . . . . . . . . . . . 73 - 84
Tread Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Custom Mold Tread Guide . . . . . . . . . . . . . . . . . . . . . . . . . 75
Casing Fitment Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Recommended Buffing Specifications . . . . . . . . . . 76 - 77
Retread Tread Designs . . . . . . . . . . . . . . . . . . . . . . . . . 78 - 84
® XDA ® Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . 78
X One ® XDA-HT ™ Pre-Mold ™ Retread . . . . . . . . . . . . . . . 78
® XTA ® Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . 78
X One ® XTE ® Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . 78
® XZU ® S Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . 78
XDA2 ® 19/23 Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . 79
™ Pre-Mold ™ Retread . . . . . . . . . . . . 79
XD4 ® Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . . . . 79
® 2 Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . . 79
XDN ® Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . . . . 79
® Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . . 79
XDA ® Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . . . . 80
® 18/22 Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . 80
XDC ® LL Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . 80
® Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . 80
XDE ® M/S Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . 80
® Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . . . . 80
XDU ® S Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . . 81
® Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . . . . 81
XDY-1 ™ Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . . 81
Retread . . . . . . . . . . . . . . . . . . . . . . . . . . 81
XZE ® SA Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . 81
Retread . . . . . . . . . . . . . . . . . . . . . . . . . . 81
XZE ® 2 Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . . . 82
Retread . . . . . . . . . . . . . . . . . . . . . . . . . 82
XZU ® S Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . . . 82
Retread . . . . . . . . . . . . . . . . . . . . . . . . . . 82
XZY-1 ™ Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . . 82
Retread . . . . . . . . . . . . . . . . . . . . . . . . 82
XT-1 ® Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . . . . 83
XTA ® -1 Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . . 83
XTA ® Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . . . . 83
XTY ® SA Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . . . . . . . 8
Pre-Mold ™ Retread . . . . . . . . . . . . . . . . 84
Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . 84
Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . 84
Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . 84
Pre-Mold ™ Retread . . . . . . . . . . . . . . . . . 84
APPENDIX
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 - 99
Tubes, Flaps and Valves . . . . . . . . . . . . . . . . . . . . . . . . 86 - 87
Units of Measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Pressure Unit Conversion Table . . . . . . . . . . . . . . . . . . . . 88
Load Range / Ply Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Speed Symbol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Load Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Pressure Coefficients . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Proper Application of On/Off Road (Y and L) Tires . . . 91
Cold Climate Pressure Correction Data . . . . . . . . . . . . . 91
Tire’s Rev./Mile Changes . . . . . . . . . . . . . . . . . . . . . . . . . 92
Load /Inflation Table for 315/80R22.5 LRL on 8.25" Wheel . . . . . . . . . . . . . . . 93
Front Axle Overload on Auto Haulers . . . . . . . . . . . . . . . 94
Balance and Runout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Truck Tire Branding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Proper Application of Urban (“U”) Tires . . . . . . . . . . . . .98
Regrooving the MICHELIN ® XZU ® 2 . . . . . . . . . . . . . . . . .99
Mounting and Safety
Instructions
1
PART ONE: SAFETY – MOUNTING THE TIRE
IMPORTANT: BE SURE TO READ THIS SAFETY
INFORMATION.
Make sure that everyone who services tires or vehicles in your operation has read and understands these warnings. SERIOUS INJURY OR DEATH CAN RESULT
FROM FAILURE TO FOLLOW SAFETY WARNINGS.
No matter how well any tire is constructed, punctures, impact damage, improper inflation, improper maintenance, or service factors may cause tire failure creating a risk of property damage and serious or fatal injury. Truck operators should examine their tires frequently for snags, bulges, excessive treadwear, separations, or cuts. If such conditions appear, demount the tire and see a truck tire dealer immediately.
The US Department of Labor Occupational Safety and
Health Administration (OSHA) provides regulations and publications for safe operating procedures in the servicing of wheels. Please refer to OSHA Standard 29 CFR
Part 1910.177 (Servicing Multi-Piece and Single Piece
Rim Wheels). This can be found in the Section Nine,
Appendix (Pages 136-138) of the MICHELIN
®
Truck Tire
Service Manual (MWL40732).
Specifically, note that the employer shall provide a program to train all employees who service wheels in the hazards involved in servicing those wheels and the safety procedures to be followed. The employer shall ensure that no employee services any wheel unless the employee has been trained and instructed in correct procedures of servicing the type of wheel being serviced, and shall establish safe operating procedures for such service.
Michelin provides the following information to further assist employers to comply with that initiative.
2
Tire and wheel servicing can be dangerous and must be done only by trained personnel using proper tools and procedures. Failure to read and comply with all procedures may result in serious injury or death to you or others.
Re-inflation of any type of tire and wheel assembly that has been operated in a run-flat or underinflated condition
(80% or less of recommended operating pressure) can result in serious injury or death. The tire may be damaged on the inside and can explode during inflation. The wheel parts may be worn, damaged, or dislodged and can explosively separate. Refer to RMA Tire Information Service Bulletin on potential “zipper ruptures” – TISB Volume 33, Number 3
(December 2007).
RMA (Rubber Manufacturers Association) recommends that any tire suspected of having been run underinflated and/or overloaded must remain in the safety cage, be inflated to 20 psi OVER maximum pressure marked on the sidewall, and then be inspected. Do not exceed the maximum inflation pressure for the wheel.
Be sure to reduce pressure to regular operating pressure before placing back in service if the tire has been deemed serviceable.
Use of starting fluid, ether, gasoline, or any other flammable material to lubricate, seal, or seat the beads of a tubeless tire can cause the tire to explode or can cause the explosive separation of the tire and wheel assembly resulting in serious injury or death. The use of any flammable material during tire servicing is absolutely prohibited.
Any inflated tire mounted on a wheel contains explosive energy. The use of damaged, mismatched, or improperly assembled tire and wheel parts can cause the assembly to burst apart with explosive force. If you are struck by an exploding tire, wheel part, or the blast, you can be seriously injured or killed.
Re-assembly and inflation of mismatched parts can result in serious injury or death. Just because parts fit together does not mean that they belong together. Check for proper matching of all wheel parts before putting any parts together.
Mismatching tire and wheel components is dangerous. A mismatched tire and wheel assembly may explode and can result in serious injury or death. This warning applies to any combination of mismatched components and wheel combinations. Never assemble a tire and wheel unless you have positively identified and correctly matched the parts.
ZIPPER RUPTURES
A fatigue-related damage, with or without a rupture, occurs in the sidewall flex area of steel radial light and medium truck tires when it is subjected to excessive flexing or heat. This zipper rupture is a spontaneous burst of compressed gas, and the resulting rupture can range in length anywhere from 12 inches to 3 feet circumferentially around the tire. This is caused by the damage and weakening of the radial steel cables as a result of run-flat, underinflation, or overload. Eventually, the pressure becomes too great for the weakened cables to hold, and the area ruptures with tremendous force.
The RMA (Rubber Manufacturers Association) states that permanent tire damage due to underinflation and/or overloading cannot always be detected. Any tire known or suspected of having been run at less than 80% of normal recommended operating pressure and/or overloaded, could possibly have permanent structural damage (steel cord fatigue).
The RMA has issued a revised Tire Industry Service
Bulletin for procedures to address zipper ruptures in certain commercial vehicle tires. The purpose of the bulletin is to describe the inspection procedures for identifying potential sidewall circumferential ruptures
(also known as “zipper ruptures”) on truck/bus tires and light-truck tires of steel cord radial construction. Zipper ruptures can be extremely hazardous to tire repair technicians. Careful adherence to proper repair procedures is crucial.
For more information contact RMA at [email protected] or visit www.rma.org.
TIRE INSPECTION
Tire inspection should always include a thorough inspection of both sidewalls and inner liner, as this may reveal any potential damage condition that would cause the tire to become scrap. Examine the inner liner for creases, wrinkling, discoloration, or insufficient repairs, and examine the exterior for signs of bumps or undulations, as well as broken cords, any of which could be potential out of service causes. Proper OSHA regulations must be followed when putting any tire and wheel back in service. After the tire has been inflated to
20 psi in a safety cage, it should undergo another sidewall inspection for distortions, undulations, or popping noises indicating a breaking of the steel cords.
If this is the case, immediately fully deflate and scrap the tire. If no damage is detected, continue to inflate to the maximum pressure marked on the sidewall. Do not exceed the maximum inflation pressure for the wheel.
Any tire suspected of having been run underinflated and/or overloaded must remain in the safety cage, be inflated to 20 psi OVER maximum pressure marked on the sidewall, and then be inspected.
PART 2: MOUNTING AND DEMOUNTING TUBELESS TIRES
In order for a tire to perform properly, it must be mounted on the correct size wheel. The following are general instructions for mounting and demounting
MICHELIN ® tubeless tires, including the MICHELIN ®
X One ® tires.
Specifics for 19.5" wheels are detailed in the Mounting
Tubeless Tire section (Page 5). For additional detailed instructions on mounting and demounting truck tires on particular types of wheels, refer to the instructions of the wheel manufacturer or the RMA wall charts.
TUBELESS TIRE MOUNTING/DEMOUNTING
USING A MOUNTING MACHINE
There are several tire changing machines available for the mount and demount procedure. Consult the manufacturer’s user manual for the machine you are using as each operates differently. Full lubrication of the wheel and beads is still required. Inflation process requirements remain the same.
DIRECTIONAL TIRES
Truck tires featuring directional tread designs have arrows molded into the shoulder/edge of the outer ribs to indicate the intended direction of tire rotation. It is important, to maximize tire performance, that directional tires be mounted correctly on wheels to ensure that the directionality is respected when mounted on the vehicle.
For example, when mounting directional drive tires on a set of 8 wheels, use the drop centers as a reference. Four tires should be mounted with the arrows pointing to the left of the technician and four tires with the arrows pointing to the right. This ensures that when the assemblies are fitted onto the vehicle that all tires can be pointed in the desired direction of rotation.
Directional steer tires should be mounted in a similar fashion, one each direction, to ensure both are pointed forward.
Once directional tires are worn greater than 50%, there is generally no negative effect of running them in a direction opposite to the indicated direction of rotation.
Operating directional tires from new to 50% worn in the opposite direction of that indicated on the tire will result in the premature onset of irregular wear, excessive noise levels, and significantly reduced tread life.
3
4
1. SELECTION OF PROPER COMPONENTS
AND MATERIALS
a. All tires must be mounted on the proper wheel as indicated in the specification tables. For complete tire specifications, refer to application specific data books. b. Make certain that wheel is proper for the tire
dimension.
c. Always install new valve cores and metal valve caps
containing plastic or rubber seals.
d. Always replace the rubber valve stem on a 16" through
19.5" wheel.
e. Always use a safety device such as an inflation cage or other restraining device that will constrain all wheel components during the sudden release of the contained gas of a single piece wheel. Refer to current OSHA standards for compliance. Do not bolt safety cages
to the floor nor add any other restraints or accessories. Cage should be placed 3 feet from
anything, including the wall. Never stand over a tire or in front of a tire when inflating. Always use a clip-on valve chuck with an in-line valve fitted with a pressure gauge or use a presettable regulator. Additionally,
ensure there is a sufficient length of hose between the clip-on chuck and the in-line valve
(if one is used) to allow the service technician to stand outside the trajectory zone when inflating.
Trajectory zone means any potential path or route that a wheel component may travel during an explosive separation or the sudden release of the pressurized gas, or an area at which the blast from a single piece wheel may be released. The trajectory may deviate from paths that are perpendicular to the assembled position of the wheel at the time of separation or explosion. See Rubber
Manufacturers Association Tire Information Service
Bulletin Volume 33, Number 3 (December 2007) for more information.
2. TIRE AND WHEEL LUBRICATION
It is essential that an approved tire mounting lubricant be used. Preferred materials for use as bead lubricants are vegetable based and mixed with proper water ratios per manufacturer’s instructions. Never use antifreeze, silicones, or petroleum-base lubricants as this will damage the rubber.
Lubricants not mixed to the manufacturer’s specifications may have a harmful effect on the tire and wheel.
The lubricant serves the following three purposes:
• Helps minimize the possibility of damage to the tire beads from the mounting tools.
• Helps ease the insertion of the tire onto the wheel by lubricating all contacting surfaces.
• Assists proper bead seating (tire and wheel centering) and helps to prevent eccentric mountings.
The MICHELIN product, Tiger Grease 80, MSPN 25817, is specifically formulated for commercial truck tire mounting. It can be obtained through any authorized
MICHELIN Truck Tire dealer or by contacting MICHELIN
Consumer Care (1-888-622-2306).
For tube-type tires apply a clean lubricant to all portions of the tire bead area and the exposed portion of the flap using sufficient but sparing quantities of lubricant.
Also, lubricate the entire rim surface of the wheel.
Avoid using excessive amounts of lubricant, which can become trapped between the tire and tube and can result in tube damage and rapid air loss.
CAUTION: It is important that tire lubricant be clean and free of dirt, sand, metal shavings, or other hard particles. The following practice is recommended: a. Use a fresh supply of tire lubricant each day, drawing from a clean supply source and placing the lubricant in a clean portable container.
b. Provide a cover for the portable container and/or other means to prevent contamination of the lubricant when not in use. For lubricants in solution, we suggest the following method that has proven to be successful in helping to minimize contamination and prevent excess lubricant from entering the tire casing: provide a special cover for the portable container that has a funnel-like device attached. The small opening of the funnel should be sized so that when a swab is inserted through the opening into the reserve of lubricant and then withdrawn, the swab is compressed, removing excess lubricant. This allows the cover to be left in place providing added protection. A mesh false bottom in the container is a further protection against contaminants.
The tire should be mounted and inflated promptly before lubricant dries.
3. PREPARATION OF WHEELS AND TIRES
a. Always wear safety goggles or face shields when buffing or grinding wheels.
b. Inspect wheel assemblies for cracks, distortion, and deformation of flanges. Using a file and/or emery cloth, smooth all burrs, welds, dents, etc. that are present on the tire side of the wheel. Inspect the condition of bolt holes on the wheels. Rim flange gauges and ball tapes are available for measuring wear and circumference of aluminum wheels.
c. Remove rust with a wire brush and apply a rust inhibiting paint on steel wheels. The maximum paint thickness is 0.0035" on the disc face of the wheel.
d. Remove any accumulation of rubber or grease that might be stuck to the tire, being careful not to damage it. Wipe the beads down with a dry rag.
MOUNTING TUBELESS
1. Inspect the condition of the bolt holes on the wheels, and look for signs of fatigue. Check flanges for excessive wear by using the wheel manufacturer’s flange wear indicator.
2. Replace valve core, and inspect valve stem for damage and wear. Michelin recommends always replacing the valve stem and using a new valve stem grommet. Ensure valve stem is installed using the proper torque value.
80-125 in/lbs (7-11 ft/lbs) for standard aluminum
wheels and 35-55 in/lbs (3-5 ft/lbs) for standard tubeless steel wheels. Ensure the valve core is installed using the proper torque value of 1.5 – 4 in/lbs.
To prevent galvanic corrosion on aluminum wheels, lubricate the threads and O-ring of the valve stem with a non-waterbased lubricant before installation.
3. Apply the tire and wheel lubricant to the rim surface of the wheel and bead area of the tire. When applying lubricant to the wheel, lubricate the entire rim surface from flange to flange. The tire should be mounted and inflated before the lubricant dries.
4. With short ledge up, lay the tire over the wheel opposite the valve side and work it on with proper tubeless tire tools, making full use of the drop center well. Drop center wheels are typically designed with an off-set drop center to accommodate wheel width and brake clearance. This creates a “short side” and a “long side” on the wheel.
(Some drop center wheels are designed with a symmetric wheel profile facilitating tire mounting from either side.)
It is imperative that the tire always be mounted and dismounted only from the short side. Failure to do this will likely result in damaged tire beads that could eventually cause rapid gas loss due to casing rupture.
This is particularly important on 19.5 inch RW (reduced well) aluminum wheels which, contrary to the norm, have their drop center located close to the disc side. Do not use a 19.5 x 7.50 wheel for the 305/70R19.5 tire size.
All 19.5 inch tubeless wheels should be mounted from the short side. Care should be taken to ensure that any internal monitoring system molded in the tire or on the wheel is not damaged or dislodged during this service.
5.
Do not use any kind of hammer.
Severe inner liner damage may occur resulting in sidewall separation and tire destruction. Use only proper mounting levers;
DO NOT USE A DUCK BILL HAMMER.
6. The MICHELIN ® X One ® tire is designed to replace dual tires on the drive and trailer positions of tandem over the road vehicles, and the tires must be mounted on
22.5 x 14.00" size wheels. Position the tire and wheel assembly so the valve stem is facing outward, away from the vehicle.
INFLATION OF TUBELESS TIRES
1. Lay tire/wheel assembly horizontally and inflate to no more than 5 psi to position the beads on the flanges.
OSHA dictates no more than 5 psi outside the cage to seat the beads.
2. To complete the seating of the beads, place the assembly in an OSHA (Occupational Safety and Health
Administration) compliant inflation restraining device
(i.e. safety cage) and inflate to 20 psi. Check the assembly carefully for any signs of distortion or irregularities from run-flat. If run-flat is detected, scrap the tire.
3. If no damage is detected, continue to inflate to the maximum pressure marked on the sidewall. RMA
(Rubber Manufacturers Association) recommends that if any tire suspected of having been underinflated and/or
Re-inflation of any type of tire and wheel assembly that has been operated in a run-flat or underinflated condition (less than 80% of normal recommended operating pressure) can result in serious injury or death. The tire may be damaged on the inside and can explode during inflation. The wheel parts may be worn, damaged or dislodged and can explosively separate.
overloaded must remain in the safety cage at 20 psi over the maximum pressure marked on the sidewall. Do not exceed the maximum inflation pressure for the wheel.
RMA requires that all steer sidewall tires are inflated without a valve core.
4. Ensure that the guide rib (GG Ring/mold line) is positioned concentrically to the wheel flange with no greater than 2⁄ 32" of difference found circumferentially.
Check for this variation by measuring at four sidewall locations (12, 3, 6, 9 o’clock). If bead(s) did not seat, deflate tire, re-lubricate the bead seats and re-inflate.
Note: As a general guide in vibration analysis, the
30/60/90 rule may apply:
.030-.060 (1⁄ 32 to 2 ⁄ 32 inch) = No action is required.
Limited possibility for vibration exists, and this range maximizes the ability to balance properly.
.061-.090 (2 ⁄ 32 to 3⁄ 32 inch) = Corrective action would be to perform the 3 R’s, after deflating the tire.
– Rotate the tire on the wheel
– Re-lubricate the tire and wheel (ensure the wheel is very clean)
– Re-inflate ensuring your initial inflation is with the tire lying horizontal (3-5 psi max)
>.090 (>3⁄ 32 inch) = Perform 3 R’s if mismount is indicated; however, when the reading is this high, it usually requires checking runout on these component parts: wheels/hubs/drums/wheel bearings.
5. After beads are properly seated, place the tire in safety cage and inflate assembly to maximum pressure rating shown on the sidewall, then reduce to operating pressure. Check valve core for leakage, then install suitable valve cap. Consider the use of inflate-thru or double seal valve caps for easier pressure maintenance.
DEMOUNTING OF TUBELESS TIRES
1. If still fitted on the vehicle, completely deflate the tire by removing the valve core. In the case of a dual assembly, completely deflate both tires before removing them from the vehicle (OSHA requirement). Run a wire or a pipe cleaner through the valve stem to ensure complete deflation.
2. With the tire assembly lying flat (after deflating the tire), break the bead seat of both beads with a bead breaking tool. Do not use hammers of any type to seat the bead.
Striking a wheel assembly with a hammer of any type
5
can damage the tire or wheel and endanger the installer.
Use a steel duck bill hammer only as a wedge. Do not strike the head of a hammer with another hard faced hammer – use a rubber mallet.
3. Apply the vegetable-based lubricant to all surfaces of the bead area of the tire.
4. Beginning at the valve, remove the tire from the wheel.
Starting at the valve will minimize chances of damaging the valve assembly. Make certain that the rim flange with the tapered ledge that is closest to the drop center is facing up. Insert the curved ends of the tire irons between the tire and rim flange. Step forward into the drop center and drop the bars down, lifting the tire bead over the rim flange. Hold one tire iron in position with your foot. Pull the second tire iron out and reposition it about 90 degrees from the first iron. Pull the second tire iron towards the center of the wheel. Continue to work tools around wheel until first bead is off the wheel.
5. Lift the assembly, place and rotate the tire iron to lock on the back rim flange, allow the tire to drop, and with a rocking motion remove the tire from the wheel.
6
PART 3: MOUNTING AND DEMOUNTING TUBE-TYPE TIRES
A tire cannot perform properly unless it is mounted properly on the correct size wheel. The following are general instructions for demounting and mounting
MICHELIN ® tube-type tires. For detailed instructions on mounting and demounting truck tires on particular types of wheels, refer to the instructions of the wheel manufacturer or the RMA (Rubber Manufacturers
Association) wall charts.
Do not re-inflate any tires that have been run underinflated or flat without careful inspection for damage. If run-flat damage is detected, scrap the tire.
A tire is considered run-flat if it is found to be less than
80% of normal recommended operating pressure. This can result in serious injury or death. The tire may be damaged on the inside and can explode during inflation. The wheel parts may be worn, damaged or dislodged and can explosively separate.
e. Always install new valve cores and metal valve caps
containing plastic or rubber seals. For tires requiring
O-rings, be sure to properly install a new silicone
O-ring at every tire change.
f. Always use a safety device such as an inflation cage or other restraining device that will constrain all wheel components during an explosive separation of a multipiece wheel, or during the sudden release of the contained gas of a single piece wheel that is in compliance with OSHA (Occupational Safety and Health
Administration) standards. Do not bolt restraining device to the floor. Never stand over a tire or in front of a tire when inflating. Always use a clip-on valve chuck with an in-line valve with a pressure gauge or a presettable regulator. Additionally, ensure there is a sufficient length of hose between the clip-on chuck and the in-line valve
(if one is used) to allow the service technician to stand outside the trajectory path when inflating. Trajectory zone means any potential path or route that a wheel component may travel during an explosive separation, or the sudden release of the pressurized gas, or an area at which the blast from a single piece wheel may be released. The trajectory may deviate from paths that are perpendicular to the assembled position of the wheel at the time of separation or explosion.
NEVER WELD OR APPLY HEAT TO A WHEEL ON
WHICH A TIRE IS MOUNTED.
1. SELECTION OF PROPER COMPONENTS
AND MATERIALS
a. All tires must be mounted with the proper MICHELIN
®
tube and flap (if required) and wheel as indicated in the specification tables on Page 93 of the MICHELIN
Truck Tire Service Manual (MWL40732).
For complete tire specifications, refer to application specific data books. b. Make certain that wheel components are properly
matched and of the correct dimensions for the tire.
c. Always fit a new MICHELIN
® tube in a new mounting.
Since a tube will exhibit growth in size through normal use, an old tube used in a new mounting increases the possibility of tube creasing and chafing, possibly resulting in failure. d. Always install a new flap in a new mounting. A flap, through extended use, becomes hard and brittle. After a limited time, it will develop a set to match the tire and wheel in which it is fitted. Therefore, it will not exactly match a new tire and wheel combination.
2. TIRE AND WHEEL LUBRICATION
It is essential that an approved tire mounting lubricant be used. Preferred materials for use as bead lubricants are vegetable based and mixed with proper water ratios per manufacturer’s instructions. Never use antifreeze, silicones, or petroleum-base lubricants as this will damage the rubber. Lubricants not mixed to the manufacturer’s specifications may have a harmful effect on the tire and wheel.
The lubricant serves the following three purposes:
• Helps minimize the possibility of damage to the tire beads from the mounting tools.
• Helps ease the insertion of the tire onto the wheel by lubricating all contacting surfaces.
• Assists proper bead seating (tire and wheel centering) and helps to prevent eccentric mountings.
The MICHELIN ® product, Tiger Grease 80, MSPN 25817, is specifically formulated for commercial truck tire mounting. It can be obtained through any authorized
MICHELIN Truck Tire dealer or by contacting MICHELIN
Consumer Care (1-888-622-2306).
Apply a clean lubricant to all portions of the tire bead area and the exposed portion of the flap using sufficient but sparing quantities of lubricant. Also, lubricate the
entire rim surface. Avoid using excessive amounts of lubricant, which can become trapped between the tire and tube and can result in tube damage and rapid gas loss.
CAUTION: It is important that tire lubricant be clean and free of dirt, sand, metal shavings, or other hard particles. The following practice is recommended: a. Use a fresh supply of tire lubricant each day, drawing from a clean supply source and placing the lubricant in a clean portable container.
b. Provide a cover for the portable container and/or other means to prevent contamination of the lubricant when not in use. For lubricants in solution, we suggest the following method, which has proven to be successful in helping to minimize contamination and prevent excess lubricant from entering the tire casing: provide a special cover for the portable container that has a funnel-like device attached. The small opening of the funnel should be sized so that when a swab is inserted through the opening into the reserve of lubricant and then withdrawn, the swab is compressed, removing excess lubricant. This allows the cover to be left in place providing added protection. A mesh false bottom in the container is a further protection against contaminants.
The tire should be mounted and inflated promptly before lubricant dries.
3. PREPARATION OF WHEELS AND TIRES
a. Always wear safety goggles or face shields when buffing or grinding wheels.
b. Inspect wheel assemblies for cracks, distortion, and deformation of flanges. Using a file and/or emery cloth, smooth all burrs, welds, dents, etc. that are present on the tire side of the wheel. Inspect the condition of bolt holes on the wheels. Rim flange gauges and ball tapes are available for measuring wear and circumference of aluminum wheels.
c. Remove rust with a wire brush and apply a rust inhibiting paint on steel wheels. The maximum paint thickness is .0035" (3.5 mils) on the disc face of the wheel.
d. Remove any accumulation of rubber or grease stuck to the tire, being careful not to damage it. Wipe the beads down with a dry rag.
DEMOUNTING TUBE-TYPE TIRE
1. Before loosening any nuts securing the wheel assembly to the vehicle, remove the valve core and deflate completely. If working on a dual assembly, completely deflate both tires. Run a wire or pipe cleaner through the valve stem to ensure complete deflation. This is to prevent a possible accident.
2. Remove the tire and wheel assembly from the vehicle and place on the floor with the side ring up.
3. Run a wire or pipe cleaner through the valve stem to clear the valve stem.
4. Apply lubricant to all surfaces of the bead area of the tire. Use the duck bill hammer, with the rubber mallet as a wedge, or a slide hammer.
5. For two-piece wheels, remove the side ring by pushing the tire bead down. Insert the tapered end of the rim tool into the notch and pry the side ring out of the gutter. Pry progressively around the tire until the side ring is free of the gutter.
6. For three-piece wheels, remove the lock ring by pushing the side rings and the tire bead down. Insert the tapered end of the rim tool into the notch near the split in the lock ring, push the tool downward, and pry the lock ring outward to remove the gutter from the base. Use the hooked end of the rim tool progressively around the tire to complete the removal, then lift off the side ring.
7. Turn the assembly over.
8. Unseat the remaining tire bead from the rim, and lift the rim from the tire.
Any inflated tire mounted on a wheel contains explosive energy. The use of damaged, mismatched or improperly assembled tire and wheel parts can cause the assembly to burst apart with explosive force. If you are struck by an exploding tire, wheel part or the blast, you can be seriously injured or killed. Do not attempt to dismount the tire while the assembly is still installed on the vehicle. Use proper tools to demount or mount wheel parts. Never use a steel hammer to seat wheel parts – use only rubber, plastic, or brass-tipped mallets.
Striking a wheel assembly with a hammer of any type can damage the tire or wheel and endanger the installer. Use a steel duck bill hammer only as a wedge.
Do not strike the head of a hammer with another hard-faced hammer – use a rubber mallet.
MOUNTING TUBE-TYPE TIRE
1. Insert the proper size MICHELIN
® tube into the tire and partially inflate (3 psi) to round out the tube (with larger sizes it may be necessary to use bead spreaders – see Page 8 for mounting instructions).
2. Insert the valve through the flap valve hole. (Make sure the reinforced patch that is directly over the flap valve hole is facing outwards.) Then insert the remainder of the flap into the tire.
3. Check the flap wings to ensure against folding. This is
7
8 easily accomplished by placing your hand into one tire side, then the other, and then running your hand along the entire flap wing.
4. Inflate the tube until the flap is secured against the tire wall and the beads start to spread apart, making sure
not to exceed 3 psi.
5. Apply a proper tire lubricant to both beads, exposed flap, and fully to the rim. Make sure that excess lubricant does not run down into the tire.
6. Lay the wheel flat on the floor with the gutter side up.
Place tire, tube, and flap on the wheel, taking care to center the valve in the slot.
7. For two-piece wheels, place the side ring on the rim base so that the ring split is opposite the valve stem by placing the leading end (end without the notch) of the ring into the groove in the rim, and progressively walk the side ring into place. Ensure the ring is fully seated in the gutter.
8. For three-piece wheels, place the side ring on the rim base and stand on the ring to position it below the gutter rim base. Snap the leading end (end without the notch) of the lock ring into the gutter of the rim base, and progressively walk the lock ring into place. Ensure the ring is fully seated in the gutter.
Re-assembly and inflation of mismatched parts can result in serious injury or death. Just because parts fit together does not mean that they belong together.
Check for proper matching of all wheel parts before putting any parts together. Inspect the tire and the wheel for any damage that would require them to be placed out of service.
Mismatching tire and wheel components is dangerous.
A mismatched tire and wheel assembly may explode and can result in serious injury or death. This warning applies to any combination of mismatched components and wheel combinations. Never assemble a tire and wheel unless you have positively identified and correctly matched the parts.
MOUNTING OF TUBE-TYPE TIRES USING
MANUAL SPREADERS
1. Follow Steps 1 through 3 of the “Mounting of Tube-Type
Tires.” However, before inserting the flap into the tire, position two bead spreaders in the following manner: a. Place the first at a 90° angle to the valve. (Flap is positioned between the spreader and the tube.) b. Place the second directly opposite the first.
c. Spread the beads and insert the flap.
d. Close the beads, remove spreaders.
2. Follow Steps 4 through 8 of the “Mounting of
Tube-Type Tires.”
MOUNTING OF TUBE-TYPE TIRES USING
AUTOMATIC SPREADERS
1. Spread the tire beads.
2. Inflate the tube to approximately 3 psi.
3. Insert the tube into the tire.
4. Insert the valve through the flap valve hole.
(As mentioned, the flap reinforced valve area must face outwards.) Insert the remainder of the flap into the tire.
5. Close the beads.
6. Apply a proper tire lubricant to the inside and outside surfaces of both beads and to that portion of the flap that appears between the beads. Make sure that excess
lubricant does not run down into the tire.
7. Follow Steps 4 through 8 of the “Mounting of Tube-Type
Tires.”
INFLATION OF TUBE-TYPE TIRES
1. An inflation line with an extension (30" minimum), in-line gauge, and a clip-on valve chuck should be used for inflation. Remove valve core and lay the assembly flat on the ground. Using an approved restraining device, inflate partially to seat beads to no more than
3 psi. While the tire is still in the restraining device, make sure all wheel components are centered and locked properly. If not, the tire must be deflated, broken down, relubricated and reinflated. Do not attempt to seat the lock ring by means of a hammer.
2. Deflate the tire by removing the inflation line. This is to allow the tube to relax, thus, eliminating any wrinkles or uneven stretching that may have occurred during primary inflation.
3. With the valve core still removed, place the dual and
wheel assembly into an approved safety cage or other approved restraining device meeting OSHA
(Occupational Safety and Health Administration)
standards, and reinflate the tire to the pressure shown on the sidewall in order to ensure proper bead seating.
Then adjust the tire to the proper operating pressure.
Never stand over a tire or in front of a tire when inflating. Always use a clip-on valve chuck with an in-line valve with a pressure gauge or a presettable regulator and a sufficient length of hose between the clip-on chuck and in-line valve (if one is used) to allow the employee to stand outside the trajectory path when inflating. RMA (Rubber Manufacturers Association) requires that all steel sidewall radial tires are inflated without a valve core.
4. Reinspect the assembly for proper positioning and seating of all components.
5. Check for leaks, and install a suitable valve cap.
Do not re-inflate any tires that have been run under-inflated or flat without careful inspection for damage. If run-flat damage is detected, scrap the tire. A tire is considered run-flat if it is found to be less than 80% of normal recommended operating pressure.
RV Tires
9
10
MICHELIN
®
RV TIRE REFERENCE CHART
SIZE
Load
Range
Tread
LT215/85R16
LT225/75R16
LT235/85R16
LT245/75R16
10R17.5
8R19.5
225/70R19.5
245/70R19.5
9R22.5
10R22.5
11R22.5
12R22.5
235/80R22.5
255/70R22.5
255/80R22.5
275/70R22.5
275/80R22.5
295/60R22.5
295/80R22.5
305/70R22.5
315/80R22.5
365/70R22.5
11R24.5
275/80R24.5
H
H
H
J
G
G
H
H
G
G
J
J
G
H
G
G
L
L
L
L
G
H
H
H
G
G
F
F
G
G
G
F
G
F
G
H
E
E
G
E
E
F
F
With chip and cut resistant tread compound.
XZA ®
XRV ®
XZE ®
XZE ®
XRV
®
XPS RIB ®
XPS RIB ®
XPS RIB ®
XPS RIB ®
XZA
®
XZE ®
XZE ®
XZE ®
XZE ®
XZE ®
XZA3 ®
+ Evertread
™
XZE2
XZA3 ®
+ Evertread
™
XZE2 ™
XZE
®
XRV ®
XZE ®
XZE
®
XRV ®
XZE ®
XZA2 ® ENERGY
XZE2+
XZA3 ®
+ Evertread
™
XZE2 ™
XZA3 ®
+ Evertread
™
XZE ™
XZA2 ® ENERGY
XZA2 ® ENERGY
XZE2+
XRV ®
XZA2 ® ENERGY
XZA ® 1
XZA ®
XZA3 ®
+ Evertread
™
XZE2 ™
XZE2 ™
XZA3 ®
+ Evertread
™
XZE2 ™
Specifications
Page Number
Catalog
Number
39
38
38
40
37
40
37
39
11
39
38
40
40
40
37
40
11
38
39
37
37
37
40
39
11
39
39
39
39
37
40
39
39
11
39
39
21
21
21
21
41
41
11
26413
55895
39174
01637
33215
76807
81993
61737
59634
94390
90059
78395
93499
76184
47056
71842
27983
91867
88507
28791
75519
38479
67042
85335
87511
68749
75473
79883
99141
25041
78390
81473
91043
67140
66338
75997
39510
08404
13080
26848
05008
60893
58916
Max. Load and Pressure Single
120
110
110
130
130
120
120
120
110
110
120
130
120
120
110
110
120
105
120
110
110
120
130
130
125
105
105
100
115
105
105
95
110
95
110
120
80
80
115
110
95
psi
80
80
2500
2360
2360
3150
3150
3000
3000
3350
2360
2360
2800
2800
3250
3250
3550
3550
3550
3000
3250
2800
2800
3550
4125
4125
4750
3000
2060
2360
2575
2800
2800
1650
1800
1850
2060
2240
kg.
1215
1215
1380
1380
2180
1600
1650
5510
5205
5205
6940
6940
6610
6610
7390
5205
5205
6175
6175
7160
7160
7390
7830
7830
7830
9090
9090
10500
6610
6610
7160
6175
6175
4540
5205
5675
6175
6175
3640
3970
4080
4540
4940
lbs.
2680
2680
3042
3042
4805
3525
3640
830
760
760
900
900
830
830
830
760
760
830
900
830
830
760
760
830
720
830
760
760
830
900
900
860
720
720
690
790
720
720
660
760
660
760
830
550
550
790
760
660
kPa
550
550
18
16
20
18
19
19
22
22
16
19
22
16
16
20
19
22
19
22
22
19
22
16
17
18
19
19
18
21
21
19
22
17
17
14
18
18
15
15
16
16
13
Tread
Depth
32nds
15
14
Max. Load and Pressure Dual
120
110
110
120
120
120
120
120
110
110
120
130
120
120
110
110
120
105
120
110
110
120
130
130
—
105
105
100
115
105
105
95
110
95
110
120
80
80
115
110
95
psi
80
80
2300
2180
2180
2900
2900
2725
2725
3075
2180
2180
2575
2575
3000
3000
3075
3150
3150
2725
3000
2575
2575
3150
3750
3750
—
2725
1950
2240
2430
2650
2650
1550
1700
1750
1950
2120
kg.
1120
1120
1260
1260
2060
1500
1550
5070
4805
4805
6395
6395
6005
6005
6780
4805
4805
5675
5675
6610
6610
6780
6940
6940
6005
6610
5675
5675
6940
8270
8270
—
6005
4300
4940
5355
5840
5840
3415
3750
3860
4300
4675
lbs.
2470
2470
2778
2778
4540
3305
3415
830
760
760
830
830
830
830
830
760
760
830
900
830
830
760
760
830
720
830
760
760
830
900
900
—
720
720
690
790
720
720
660
760
660
760
830
550
550
790
760
660
kPa
550
550
XRV
®
HIGHWAY & REGIONAL APPLICATIONS
All-position radial designed specifically for exceptional performance on recreational vehicles and motorhomes
• Wide, “see-through” grooves promote drainage efficiency to help improve traction on wet surfaces
• Multi-siping helps deliver dependable grip and long, even wear
• Enlarged sidewall characters makes load/pressure information easier to read, facilitating proper use and maintenance
• Stable tread with cool running compound engineered to reduce squirm and lower heat for improved handling and durability
1 2
- 305/70R22.5
Size
225/70R19.5 (1)
245/70R19.5
(1)
235/80R22.5 (1)
255/80R22.5 (1)
305/70R22.5
(2)
Load
Range
F
F
Catalog
Number
58916
Tread
Depth
Max.
Speed
(*)
32nds mph
13
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
75 14.9
379 32.0
813 8.7
222
67140 14 75 15.5
393 33.3
846 9.6
245
Approved
Wheels
(Measuring wheel listed first.)
6.00, 6.75
Min. Dual
Spacing (‡) in
9.7
mm
246
Revs
Per
Mile
648
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
3640 95 1650 660 3415 95 1550 660
6.75, 7.50
10.7
272 625 4080 95 1850 660 3860 95 1750 660
G
G
L
87511 16
59634 16
93499 16
75 17.4
443 37.1
942 9.2
233
75 17.9
456 38.2
972 9.9
251
75 18.1
460 39.1
994 12.3
312
6.75, 7.50
10.3
262 556 4675 110 2120 760 4410 110 2000 760
7.50, 8.25
11.2
284 541 5205 110 2360 760 4805 110 2180 760
9.00, 8.25
13.5
343 531 7830 120 3550 830 6940 120 3150 830
(1, 2) Tread design as indicated above the tire picture.
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
MICHELIN INFLATION CHARTS FOR RV USAGE
For RV use only, Michelin displays tire loads per axle end in the load and inflation tables, as we recommend weighing each axle end separately and using the heaviest end weight to determine the axle's cold inflation tire pressure. For control of your
RV, it is critical the tire pressures be the same across an axle, while NEVER exceeding the maximum pressure limit stamped on the wheels.
To select the proper load and inflation table, locate your tire size in the following pages, then match your tire's sidewall markings to the table with the same sidewall markings. If your tire's sidewall markings do not match any table listed, please contact your Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of change, and Michelin continually updates its product information to reflect these changes. Printed material may not reflect the latest load and inflation standards.
In the load and inflation tables, SINGLE means an axle with one tire mounted on each end, while DUAL means an axle with two tires mounted on each end. In an RV application, the loads indicated represent the total weight of an axle end.
When one axle end weighs more than the other, use the heaviest of the two end weights to determine the unique tire pressure for all tires on the axle. The maximum cold pressure for each axle may vary, depending on their weights. These tables are applicable for all RV axles, whether or not they are power-driven.
11
12
MICHELIN INFLATION CHARTS FOR RV USAGE
In the load and inflation tables, SINGLE means an axle with one tire mounted on each end, while DUAL means an axle with two tires mounted on each end. In an RV application, the loads indicated represent the total weight of an axle end.
When one axle end weighs more than the other, use the heaviest of the two end weights to determine the unique tire pressure for all tires on the axle. The maximum cold pressure for each axle may vary, depending on their weights. These tables are applicable for all RV axles, whether or not they are power-driven.
WHEEL DIAMETER
16"
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL
LT215/85R16 LRE
XPS RIB
LT225/75R16 LRE
XPS RIB
LT235/85R16 LRE
XPS RIB
LT245/75R16 LRE
XPS RIB
PSI kPa
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
1500
2730
700
1270
1700
3090
35
250
1495
2720
695
1260
790
1440
1700
3090
790
1440
1650
3000
750
1360
1870
3400
40
280
1640
2980
745
1350
850
1545
1865
3390
845
1540
1790
3260
813
1480
2030
3690
45
310
1785
3250
810
1475
920
1675
2030
3690
920
1675
1940
3530
880
1600
2205
4010
50
350
1940
3530
880
1600
1000
1820
2205
4010
1000
1820
2060
3750
935
1700
2335
4250
55
380
2050
3730
930
1690
1060
1930
2335
4250
1060
1930
2190
3990
995
1810
2485
4520
60
410
2180
3970
990
1800
1130
2050
2480
4510
1125
2045
2335
4300
1060
1950
2625
4760
65
450
2335
4300
1060
1950
1190
2160
2625
4763
1190
2160
2440
4440
1108
2015
2765
5030
70
480
2430
4420
1100
2005
1255
2280
2765
5030
1255
2280
2560
4660
1160
2115
2905
5290
75
520
2550
4640
1155
2105
1320
2400
2900
5280
1315
2395
2680
4940
1215
2240
3042
5556
80
550
2680
4940
1215
2240
1380
2520
3042
5556
1380
2520
S 2680 LBS AT 80 PSI
D 2470 LBS AT 80 PSI
S 1215 KG AT 550 kPa
D 1120 KG AT 550 kPa
S 2680 LBS AT 80 PSI
D 2470 LBS AT 80 PSI
S 1215 KG AT 550 kPa
D 1120 KG AT 550 kPa
S 3042 LBS AT 80 PSI
D 2778 LBS AT 80 PSI
S 1380 KG AT 550 kPa
D 1260 KG AT 550 kPa
S 3042 LBS AT 80 PSI
D 2778 LBS AT 80 PSI
S 1380 KG AT 550 kPa
D 1260 KG AT 550 kPa
WHEEL DIAMETER
17.5"
10R17.5 LRG
XZA
PSI kPa
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
85
590
3860
7280
1750
3300
90
620
4005
7570
1820
3440
95
660
4150
7860
1890
3580
100
690
4300
8160
1950
3700
105
720
4470
8470
2030
3840
110
760
4640
8780
2110
3980
115
790
4805
9080
2180
4120
120
830
125
860
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL
S 4805 LBS AT 115 PSI
D 4540 LBS AT 115 PSI
S 2180 KG AT 790 kPa
D 2060 KG AT 790 kPa
WHEEL DIAMETER
19.5"
8R19.5 LRF
XZA
PSI kPa
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
65
450
225/70R19.5 LRF
LBS SINGLE 2755
LBS DUAL 5200
XRV, XZE
225/70R19.5 LRG
XZE
245/70R19.5 LRF
XRV
245/70R19.5 LRG
XZE
KG SINGLE 1250
KG DUAL 2360
LBS SINGLE 2755
LBS DUAL 5200
KG SINGLE
KG DUAL
LBS SINGLE
1250
2360
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
More Wheel Diameter 19.5" continues on the next page.
2895
5440
1310
2460
2895
5440
1310
2460
70
480
2540
4920
1150
2240
3040
5720
1380
2600
3040
5720
1380
2600
75
520
2680
5140
1220
2340
1500
2820
3740
7030
1700
3180
3740
7030
1700
3180
3315
6230
1500
2820
3315
6230
85
590
2955
5570
1340
2520
1450
2720
3640
6830
1650
3100
3640
6830
1650
3100
3195
6000
1450
2720
3195
6000
80
550
2835
5360
1285
2430
1570
2940
3890
7310
1770
3320
3890
7310
1770
3320
3450
6490
1570
2940
3450
6490
90
620
3075
5780
1400
2620
1650
3100
4080
7720
1850
3500
4080
7720
1850
3500
3640
6830
1650
3100
3640
6830
95
660
3195
6000
1450
2720
100
690
3305
6200
1500
2820
3715
6980
1690
3160
3845
7230
1740
3280
4190
7880
1900
3580
105
720
3415
6400
1550
2920
4335
8150
1970
3700
110
760
3525
6610
1600
3000
3970
7500
1800
3400
4540
8600
2060
3900
115
790
120
830
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL
S 3525 LBS AT 110 PSI
D 3305 LBS AT 110 PSI
S 1600 KG AT 760 kPa
D 1500 KG AT 760 kPa
S 3640 LBS AT 95 PSI
D 3415 LBS AT 95 PSI
S 1650 KG AT 660 kPa
D 1550 KG AT 660 kPa
S 3970 LBS AT 110 PSI
D 3750 LBS AT 110 PSI
S 1800 KG AT 760 kPa
D 1700 KG AT 760 kPa
S 4080 LBS AT 95 PSI
D 3860 LBS AT 95 PSI
S 1850 LBS AT 660 kPa
D 1750 LBS AT 660 kPa
S 4540 LBS AT 110 PSI
D 4300 LBS AT 110 PSI
S 2060 KG AT 760 kPa
D 1950 KG AT 760 kPa
MICHELIN INFLATION CHARTS FOR RV USAGE
In the load and inflation tables, SINGLE means an axle with one tire mounted on each end, while DUAL means an axle with two tires mounted on each end. In an RV application, the loads indicated represent the total weight of an axle end.
When one axle end weighs more than the other, use the heaviest of the two end weights to determine the unique tire pressure for all tires on the axle. The maximum cold pressure for each axle may vary, depending on their weights. These tables are applicable for all RV axles, whether or not they are power-driven.
WHEEL DIAMETER
19.5"
245/70R19.5 LRH
XZE
PSI kPa
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
65
450
70
480
75
520
3390
6420
1540
2910
80
550
3570
6760
1620
3065
85
590
3750
7100
1700
3220
90
620
3925
7430
1780
3370
95
660
4100
7760
1860
3520
100
690
4270
8080
1935
3665
105
720
4440
8400
2015
3810
110
760
4610
8720
2090
3955
115
790
4775
9040
2165
4100
120
830
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL
4940 S 4940 LBS AT 120 PSI
9350 D 4675 LBS AT 120 PSI
2240 S 2240 KG AT 830 kPa
4240 D 2120 KG AT 830 kPa
WHEEL DIAMETER
22.5"
9R22.5 LRF
XZE
10R22.5 LRF
XZE
10R22.5 LRG
XZE
11R22.5 LRG
XZA3+ Evertread,
XZE2
11R22.5 LRH
XZA3+ Evertread,
XZE2
12R22.5 LRH
XZE
235/80R22.5 LRG
XRV, XZE
255/70R22.5 LRH
XZE
255/80R22.5 LRG
XRV, XZE
275/70R22.5 LRJ
XZA2 ENERGY,
XZE2+
PSI 70 75 80 85 90 95 100 105 110 115 120 125 130
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL kPa 480 520 550 590 620 660 690 720
LBS SINGLE 3370 3560 3730 3890 4080 4235 4390 4540
LBS DUAL 6540 6820 7100 7380 7720 8010 8300 8600
KG SINGLE 1530 1615 1690 1760 1850 1920 1990 2060
KG DUAL 2960 3100 3220 3340 3500 3640 3780 3900
LBS SINGLE 4080 4280 4480 4675 4850 5025 5205
LBS DUAL 7720 8090 8460 8820 9170 9520 9880
760 790
KG SINGLE 1850 1940 2030 2120 2200 2280 2360
KG DUAL 3500 3660 3820 4000 4160 4320 4480
LBS SINGLE 4080 4280 4480 4685 4850 5025 5205 5360 5515 5675
LBS DUAL 7720 8090 8460 8820 9170 9520 9880 10150 10420 10710
KG SINGLE 1850 1940 22030 2120 2200 2280 2360 2430 2500 2575
KG DUAL 3500 3660 3820 4000 4160 4320 4480 4600 4720 4860
830
LBS SINGLE 4530 4770 4990 5220 5510 5730 5950 6175
LBS DUAL 8760 9160 9520 9900 10410 10830 11250 11680
KG SINGLE 2050 2160 2260 2370 2500 2600 2700 2800
KG DUAL
LBS SINGLE
LBS DUAL
3980 4160
4770
9160
4320
4990
9520
4500
5220
9900
4720
5510
10410
4920
5730
10830
5120
5950
11250
5300
6175
11680
6320
11790
6465
11900
6610
12010
KG SINGLE
KG DUAL
LBS SINGLE
2160 2260 2370 2500 2600 2700 2800 2870 2940 3000
4160 4320 4500 4720 4920 5120 5300 5360 5420 5450
5200 5450 5690 6005 6205 6405 6610 6870 7130 7390
LBS DUAL
KG SINGLE
9980 10380 10780 11350 11570 11790 12010 12530 13050 13560
2360 2470 2580 2725 2820 2910 3000 3120 3240 3350
KG DUAL 4520 4700 4880 5150 5260 5360 5450 5680 5920 6150
LBS SINGLE 3255 3440 3625 3805 3980 4160 4330 4505 4675
LBS DUAL 6140 6490 6840 7180 7510 7840 8170 8500 8820
850 900
KG SINGLE 1475 1560 1645 1725 1805 1885 1965 2045 2120
KG DUAL 2785 2945 3105 3255 3405 3555 3705 3855 4000
LBS SINGLE 4190 4370 4550 4675 4895 5065 5205 5400 5510
LBS DUAL
KG SINGLE
KG DUAL
7940
1900
3600
8220
1980
3720
8550
2060
3880
8820
2120
4000
8910
2220
4040
9220
2300
4180
9350
2360
4240
9830
2450
4460
10140
2500
4600
S 2120 KG AT 760 kPa
D 2000 KG AT 760 kPa
S 5510 LBS AT 120 PSI
D 5070 LBS AT 120 PSI
S 2500 KG AT 830 kPa
D 2300 KG AT 830 kPa
LBS SINGLE 3875 4070 4300 4440 4620 4805 4975 5150 5205
LBS DUAL 7050 7410 7720 8080 8410 8820 9050 9370 9610
KG SINGLE 1760 1850 1950 2010 2100 2180 2260 2340 2360
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
3200 3360 3500 3660
4940
9710
2250
4420
3820
5170
10160
2340
4600
4000
5400
10610
2460
4820
4100
5625
11050
2550
5000
4260
5850
11490
2640
5180
4360
6070
11930
2750
5400
6290
12360
2840
5580
6510
12790
2950
5800
6730
3040
6940
3150
S
D
S
D
S
D
S
D
5205 LBS AT 110 PSI
4805 LBS AT 110 PSI
2360 KG AT 760 kPa
2180 KG AT 760 kPa
6940 LBS AT 130 PSI
6395 LBS AT 120 PSI
3150 KG AT 900 kPa
2900 KG AT 830 kPa
S 4550 LBS AT 105 PSI
D 4300 LBS AT 105 PSI
S 2060 KG AT 720 kPa
D 1950 KG AT 720 kPa
S 5205 LBS AT 100 PSI
D 4940 LBS AT 100 PSI
S 2360 KG AT 690 kPa
D 2240 KG AT 690 kPa
S 5675 LBS AT 115 PSI
D 5355 LBS AT 115 PSI
S 2575 KG AT 790 kPa
D 2430 KG AT 790 kPa
S 6175 LBS AT 105 PSI
D 5840 LBS AT 105 PSI
S 2800 KG AT 720 kPa
D 2650 KG AT 720 kPa
S 6610 LBS AT 120 PSI
D 6005 LBS AT 120 PSI
S 3000 KG AT 830 kPa
D 2725 KG AT 830 kPa
S 7390 LBS AT 120 PSI
D 6780 LBS AT 120 PSI
S 3350 KG AT 830 kPa
D 3075 KG AT 830 kPa
S 4675 LBS AT 110 PSI
D 4410 LBS AT 110 PSI
With chip and cut resistant tread compound.
More Wheel Diameter 22.5" continues on the next page.
13
14
MICHELIN INFLATION CHARTS FOR RV USAGE
In the load and inflation tables, SINGLE means an axle with one tire mounted on each end, while DUAL means an axle with two tires mounted on each end. In an RV application, the loads indicated represent the total weight of an axle end.
When one axle end weighs more than the other, use the heaviest of the two end weights to determine the unique tire pressure for all tires on the axle. The maximum cold pressure for each axle may vary, depending on their weights. These tables are applicable for all RV axles, whether or not they are power-driven.
WHEEL DIAMETER
22.5"
275/80R22.5 LRG
XZA3+ Evertread,
XZE2
275/80R22.5 LRH
XZA3+ Evertread,
XZE
295/60R22.5 LRJ
XZA2 ENERGY,
295/80R22.5 LRH
XZA2 ENERGY,
XZE2+
305/70R22.5 LRL
XRV
315/80R22.5 LRL
XZA1,
XZA2 ENERGY
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
PSI
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
70 75 80 85 90 95 100 105 110 115 120 125 130
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL kPa 480 520 550 590 620 660 690 720 760
LBS SINGLE 4500 4725 4940 5155 5370 5510 5780 5980 6175
LBS DUAL 8190 8600 9080 9380 9770 10140 10520 10880 11350
KG SINGLE 2040 2140 2240 2340 2440 2500 2620 2710 2800
KG DUAL
LBS SINGLE
LBS DUAL
3720 3900 4120 4260 4440 4600 4780 4940 5150
4915
9080
5175
9560
5435
10030
5690
10500
5940
10970
6190
11430
6435
11880
6680
12330
790
6920
12780
830
7160
13220
860 900
S 6175 LBS AT 110 PSI
D 5675 LBS AT 110 PSI
S 2800 KG AT 760 kPa
D 2575 KG AT 760 kPa
S 7160 LBS AT 120 PSI
D 6610 LBS AT 120 PSI
2230 2345 2465 2580 2695 2810 2920 3030 3140 3250
4120 4335 4550 4765 4975 5185 5390 5595 5795 6000
S 3250 KG AT 830 kPa
D 3000 KG AT 830 kPa
5260 5505 5750 5990 6230 6465 6700 6930 7160 7390 S 7390 LBS AT 130 PSI
9650 10100 10550 10990 11430 11860 12290 12720 13140 13560 D 6780 LBS AT 130 PSI
2385 2495 2610 2715 2825 2930 3040 3145 3230 3350 S 3350 KG AT 900 kPa
4375 4580 4785 4985 5185 5380 5575 5770 5940 6150 D 3075 KG AT 900 kPa
5375
9530
2440
4325
5375
9530
2440
4340
5660
10030
2565
4550
5660
10030
2550
4540
5940
10530
2695
4775
5940
10530
2700
4800
6415
11680
2910
5300
6220
11030
2820
5005
6220
11030
2810
4980
6670
12140
3030
5500
6495
11510
2945
5220
6495
11510
2960
5240
6940
12790
3150
5800
6770
12000
3070
5445
6770
12000
3060
5440
7190
13090
3260
5940
7040
12470
3195
5655
7040
12470
3170
5620
7440
13540
3370
6140
7300
12950
3310
5875
7300
12950
3310
5880
7610
13880
3450
6300
7570
13420
3435
6085
7570
13420
3410
6060
7920
14420
3590
6540
7830
13880
3550
6300
7830
13880
3550
6300
8270
15220
3750
6900
8810
16020
3980
7240
9090
16540
4125
7500
S
D
S
D
S
D
S
D
S
D
S
D
7830 LBS AT 120 PSI
6940 LBS AT 120 PSI
3550 KG AT 830 kPa
3150 KG AT 830 kPa
7830 LBS AT 120 PSI
6940 LBS AT 120 PSI
3550 KG AT 830 kPa
3150 KG AT 830 kPa
9090 LBS AT 130 PSI
8270 LBS AT 130 PSI
4125 KG AT 900 kPa
3750 KG AT 900 kPa
LBS SINGLE 7350 7710 8070 8430 8780 9130 9480 9820 10200 10500 S 10500 LBS AT 125 PSI
365/70R22.5 LRL
XZA
KG SINGLE 3335 3495 3660 3825 3985 4140 4300 4455 4625 4750 S 4750 KG AT 860 kPa
WHEEL DIAMETER
XZE2
XZE2
XZE2
24.5"
11R24.5 LRG
XZA3+ Evertread,
11R24.5 LRH
275/80R24.5 LRG
XZA3+ Evertread,
PSI kPa
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
4545
8270
2060
3740
70
480
4820
9320
2190
4220
75
2300
4420
4770
8680
2160
3940
520
5070
9740
2300
4420
5070
9740
85
2520
4780
5210
9480
2360
4300
590
5550
10520
2520
4780
5550
10520
80
2410
4600
4940
9080
2240
4120
550
5310
10140
2410
4600
5310
10140
90
2650
5000
5420
9860
2460
4480
620
5840
11020
2650
5000
5840
11020
100
2890
5320
5835
10620
2650
4820
690
6350
11680
2890
5320
6350
11680
95
2770
5160
5675
10410
2575
4720
660
6095
11350
2770
5160
6095
11350
105
3000
5450
6040
10990
2740
4980
720
6610
12010
3000
5450
6610
12010
110
760
115
790
6790
12410
3080
5640
6175
11350
2800
5150
6970
12810
3160
5820
120
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL
830
S 6610 LBS AT 105 PSI
D 6005 LBS AT 105 PSI
S 3000 KG AT 720 kPa
7160
D 2725 KG AT 720 kPa
S 7160 LBS AT 120 PSI
13220 D 6610 LBS AT 120 PSI
3250
6000
S
D
3250 KG AT 830 kPa
3000 KG AT 830 kPa
S 6175 LBS AT 110 PSI
D 5675 LBS AT 110 PSI
S 2800 KG AT 760 kPa
D 2575 KG AT 760 kPa
RV FRONT AXLE OVERLOAD
275/70R22.5 LRJ – 7.00" and 8.25" Wheel, Max Speed 75 mph
(1,2)
The 275/70R22.5 MICHELIN ® XZE ® 2+ and MICHELIN ® XZA2 ® Energy LRJ truck tires have a maximum single tire load of 6,940 lbs at 130 psi with a maximum speed rating of 75 mph.
(1)
See Load and Inflation table below. Overloading the 275/70R22.5 LRJ tires (or any highway tire) and/or exceeding the speed rating of the tire is dangerous and may lead to tire failure.
DESIGN MAXIMUM LOAD
AND PRESSURE
PER AXLE END
Single
PER TIRE
Single
PSI 85 90 95 100 105 110 115 120 125 130 130
7.50" or 8.25" Wheel,
Max Speed 75 mph
(1,2)
275/70R22.5 LRJ
XZA2 ENERGY,
XDA2+ ENERGY kPa
LBS SINGLE
KG SINGLE
590
4940
2240
620
5170
2345
660
5400
2450
690
5625
2550
720
5850
2655
760
6070
2755
790
6290
2855
830
6510
2955
860
6730
3055
900
6940
3150
900
6940
3150
295/60R22.5 LRJ – 9.00" Wheel, Max Speed 65 mph
(1)
The recommended alternative fitments are the 295/60R22.5 MICHELIN ® XZA2 ® Energy and
MICHELIN ® XDA2 ® + Energy LRJ, which are designed to be used on a 9.00 x 22.5" wheel and at a maximum speed of 65 mph.
(1)
(Note that the maximum load and pressure under these conditions match those indicated on the sidewall.)
9.00" Wheel,
Max Speed 65 mph
(1,2)
295/60R22.5 LRJ
XZA2 ENERGY,
XDA2+ ENERGY
PSI kPa
LBS SINGLE
KG SINGLE
85
590
5260
2385
90
620
5505
2495
95
660
5750
2610
100
690
5990
2715
105
720
6230
2825
110
760
6465
2930
115
790
6700
3040
120
830
6930
3145
125
860
7160
3230
DESIGN MAXIMUM LOAD
AND PRESSURE
PER AXLE END PER TIRE
130
900
7390
130
900
7390
3350 3350
295/60R22.5 LRJ – 9.00" Wheel, Max Speed 75 mph
(1)
The maximum speed of the 295/60R22.5 MICHELIN
®
XZA2
®
Energy LRJ and MICHELIN
®
XDA2 ® + Energy LRJ on a 9.00 x 22.5" wheel may be increased to 75 mph (1) by applying the following reduced load and pressure table.
(Note that the maximum load under these conditions is less than that indicated on the sidewall.)
9.00" Rim,
Max Speed 75 mph
(1,2)
295/60R22.5 LRJ
XZA2 ENERGY,
XDA2+ ENERGY
PSI kPa
LBS SINGLE
KG SINGLE
90
620
5260
2385
95
660
5505
2495
100
690
5750
2610
105
720
5990
2715
110
760
6230
2825
115
790
6465
2930
120
830
6700
3040
125
860
6930
3145
ADJUSTED MAXIMUM LOAD
AND PRESSURE
PER AXLE END PER TIRE
130
900
7160
130
900
7160
3230 3230
295/60R22.5 LRJ – 8.25" Rim, Max Speed 75 mph
(1)
In addition to running at 75 mph (1) , the 295/60R22.5 MICHELIN ® XZA2 ® Energy LRJ and
MICHELIN
®
XDA2
®
+ Energy LRJ may be mounted on an 8.25 x 22.5" wheel by applying the following further reduced load and pressure table.
(Note that the maximum load and pressure under these conditions are less than that indicated on the sidewall.)
8.25" Wheel,
Max Speed 75 mph
(1,2)
295/60R22.5 LRJ
XZA2 ENERGY,
XDA2+ ENERGY
PSI kPa
LBS SINGLE
KG SINGLE
70
480
4300
1950
75
520
4515
2050
80
550
4675
2120
85
590
4925
2230
90
620
5125
2330
95
660
5355
2430
100
690
5520
2500
105
720
5710
2590
110
760
5840
2650
115
790
6085
2760
ADJUSTED MAXIMUM LOAD
AND PRESSURE
PER AXLE END PER TIRE
120
830
6175
120
830
6175
2800 2800
(1) Exceeding the legal speed limit is neither recommended nor endorsed.
(2) Matches maximum load and pressure indicated on tire sidewall
Load and inflation industry standards are in a constant state of change. Michelin continually updates its product information to reflect these changes.
Therefore, printed material may not reflect the current load and inflation information.
Note: The actual load and inflation pressure used must not exceed the wheel manufacturer's maximum conditions.
Never exceed a wheel manufacturer's limits without permission of the component manufacturer.
Single configuration = 2 tires per axle. Dual configuration = 4 tires per axle. Loads are indicated per axle end for RV applications.
15
16
Commercial
Light Truck Tires
MICHELIN
®
COMMERCIAL LIGHT TRUCK TIRE REFERENCE CHART
ALL-SEASON RADIALS
LTX
®
A/S
ALL-SEASON RADIALS
LTX
®
M/S
RIB RADIALS
XPS RIB
®
• Designed to meet demanding OE requirements
• Smooth and even wear in commercial applications
• Exceptional wet, snow and off-highway traction
• Exceptional mileage
• Smooth and quiet ride
• All-steel construction
• Fully retreadable
• Exceptional mileage in commercial operations
ALL-TERRAIN RADIALS
LTX
®
A/T2
ALL-SEASON RADIALS
LTX
®
M/S2
TRACTION RADIALS
XPS TRACTION
• Off-highway durability
• Quiet and comfortable ride on highway
• New Silica tread compounds and lateral water evacuation enhances wet traction
• Denser full depth 3D Active Sipes promote better snow traction compared to the MICHELIN ® LTX ® M/S
• 3D Active Sipes and optimized contact patch of MaxTouch Construction ™ help provide a long-lasting tire
• All-steel construction
• Fully retreadable
• Excellent on/off road traction
• Designed for commercial operations
17
MICHELIN
®
COMMERCIAL LIGHT TRUCK TIRE REFERENCE CHART
Size
LT215/85R16
LT225/75R16
LT235/85R16
LTX
LTX
®
®
Tread Name
A/T2
M/S2
XPS RIB ®
XPS TRACTION
LTX ®
LTX
LTX
®
®
A/T2
M/S
XPS RIB ®
A/T2
LTX ® M/S2
XPS RIB
®
XPS TRACTION
Load
Range
(1)
E
E
E
E
E
E
E
E
E
E
E
Load
Index
115/112
115/112
115/112
115/112
115/112
115/112
115/112
120/116
120/116
120/116
120/116
Speed
Rating
R
R
Q
Q
R
R
Q
R
R
Q
Q
Catalog
Number
03321
02397
39510
35260
33371
25516
08404
03287
27679
13080
36496
Tread
Depth
32nds
17
14
15
17
17
15
14
17
14
15
15
Wheel Range
6.0" - 7.0"
6.0" - 7.0"
6.0" - 7.0"
6.0" - 7.5"
6.0" - 7.0"
6.0" - 7.0"
6.0" - 7.0"
lbs.
Max. Tire Load And Pressure
Single psi kg.
kPa
5.5" - 7.0" 2680
5.5" - 7.0" 2680
5.5" - 7.0" 2680
5.5" - 7.0" 2680
2680
2680
2680
3042
3042
3042
3042
LT245/75R16
LTX ® A/T2
LTX ® M/S
XPS RIB ®
LTX ® A/T2
LT265/75R16
LTX ® M/S2
LT235/80R17
LTX ® M/S2
E
E
E
E
120/116
120/116
120/116
123/120
R
R
Q
R
38953
22606
26848
26117
17
15
14
17
6.5" - 8.0"
6.5" - 7.5"
6.5" - 8.0"
7.0" - 8.0"
3042
3042
3042
3415
LT245/70R17
LTX ® A/S
LTX ® M/S2
E
E
E
E
123/120
120/117
119/116
119/116
R
R
R
R
23388
14157
90771
00644
14
14
15
14
7.0" - 8.0"
6.0" - 7.5"
6.5" - 7.5"
6.5" - 8.0"
3415
3085
3000
3000
LT245/75R17
LTX ® M/S2
LTX ® A/S
E
E
121/118
121/118
R
R
31733
83116
14
15
6.0" - 7.5" 3195
7.0" - 8.5" 3195
LT265/70R17
LTX ® M/S2
E 121/118 R 14221 14 7.0" - 8.5" 3195
(1) A letter entry indicates the load range(s) in which Michelin markets a particular tread design and size.
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
1215
1215
1215
1215
1215
1215
1215
1380
1380
1380
1380
1380
1380
1380
1550
1550
1400
1360
1360
1450
1450
1450
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
550
80
80
80
80
80
80
80
80
80
80
80
2778
2778
2778
3085
3085
2835
2755
2755
2910
2910
2910
2470
2470
2470
2778
2778
2778
2778
lbs.
Max. Tire Load And Pressure
Dual psi kg.
kPa
2470
2470
2470
2470
80
80
80
80
1120
1120
1120
1120
550
550
550
550
80
80
80
80
80
80
80
1120
1120
1120
1260
1260
1260
1260
550
550
550
550
550
550
550
1260
1260
1260
1400
1400
1285
1250
1250
1320
1320
1320
550
550
550
550
550
550
550
550
550
550
550
18
LIGHT TRUCK TIRE WARRANTY
STANDARD LIMITED WARRANTY
WHAT’S COVERED
All MICHELIN
®
Light Truck Tires have a Standard
Manufacturer’s Limited Warranty, which covers defects in workmanship and materials for the life of the original usable tread, or for 6 years from date of purchase, whichever occurs first. See Tire Dealer for details.
The owner’s manual/limited warranty booklet also includes an additional limited warranty for tread life or mileage.
NOTES AND WARNING
NOTE: All comparisons are between MICHELIN tires within this category.
(1) Sizes listed do not include P-metric and floatation dimensions. For full range of products refer to
“MICHELIN ® Data Book” No. MDL41080.
(2) Exceeding the lawful speed limit is neither recommended nor endorsed.
(3) Tire section widths and overall widths will change 0.1
inch (2.5 mm) for each 1⁄4 inch change in wheel width.
Minimum dual spacing should be adjusted accordingly.
(4) Range of approved wheel widths. For specific wheel
DANGER: Never mount a 16" diameter tire on a 16.5" wheel.
profiles and measuring wheel, refer to “MICHELIN
®
Data Book” No. MDL41080.
WARNING: Serious or fatal injury may result from tire failure due to underinflation/overinflation/overloading.
To ensure correct pressure and vehicle load, refer to vehicle owner’s manual or tire information placard in the vehicle. Serious injury or death may result from explosion of tire/wheel assembly due to improper mounting. Only tire professionals should mount tires, and they should never inflate beyond 40 psi to seat the beads. See Tire
Dealer for proper mounting. Before mixing types of tires in any configuration on any vehicle, be sure to check the vehicle owner’s manual for recommendations.
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc.
reserves the right to change product specifications at any time without notice or obligation.
LTX
®
A/S
COMMERCIAL TIRE – ALL-SEASON
MICHELIN
®
LTX
®
A/S tires offer exceptional fuel efficiency
(3)
and a lasting tread life
• EnergySaver Construction provides a fuel-efficient (3) tire shape and tread compounds that help reduce unnecessary friction when the tire rolls
• MaxTouch Construction ™ features a unique contact patch shape that evenly distributes the forces of acceleration, braking, and cornering
• Three-steel-belt in load provides incredible durability and strength to handle loads up to 13,500 lbs (2)
Size
(1)
LT245/70R17
LT265/70R17
Load
Range
E
Catalog
Number
Tread
Depth
32nds
90771 15
E 83116 15
Overall Width
(1)
Load/
Speed
Rating
Overall
Diameter
Wheel Width
Range
(1)
Min. Dual
Spacing in mm wheel in mm in mm
9.5
241 7.5" 119/116/R 30.6
777 6.5" - 7.5" 11.5
293
10.4
264 8.0" 121/118/R 31.4
798 7.0" - 8.5" 12.4
316
(1) See Warranty, Notes and Warning on Page 18.
(2) Using four LT265/75R16/E tires inflated at 80 psi.
(3) Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
Revs Per
Mile
(at 45 mph)
675
Max. Tire Load
Single
Max. Tire Load
Dual lbs.
psi kg.
kPa lbs.
psi kg.
kPa
3000 80 1360 550 2755 80 1250 550
657 3195 80 1450 550 2910 80 1320 550
LTX
®
M/S
COMMERCIAL TIRE – ALL-SEASON
MICHELIN
®
LTX
®
M/S tires offer long tread life and true all-season traction capabilities
• Straight sipes help deliver optimal grip in almost any kind of weather
• Three-steel-belt in load provides incredible durability and strength to handle loads up to 13,500 lbs (2)
• MaxTouch Construction ™ features a unique contact patch shape that evenly distributes the forces of acceleration, braking, and cornering
Size
(1)
LT225/75R16
LT245/75R16
Load
Range
E
Catalog
Number
Tread
Depth
32nds
25516 15
E 22606 15
Overall Width
(1)
9.8
249
(1) See Warranty, Notes and Warning on Page 18.
(2) Using four LT265/75R16/E tires inflated at 80 psi.
7.0"
Load/
Speed
Rating
120/116/R
Overall
Diameter
30.7
780
Wheel Width
Range
(1)
6.5" - 7.5"
Min. Dual
Spacing in mm wheel in mm in mm
8.8
224 6.0" 115/112/R 29.4
747 6.0" - 7.0" 10.2
259
11.3
288
Revs Per
Mile
(at 45 mph)
709
Max. Tire Load
Single
Max. Tire Load
Dual lbs.
psi kg.
kPa lbs.
psi kg.
kPa
2680 80 1215 550 2470 80 1120 550
681 3042 80 1380 550 2778 80 1260 550
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
19
LTX
®
M/S2
COMMERCIAL TIRE – ALL-SEASON
MICHELIN
®
LTX
®
M/S2 tires offer an exceptional combination of enhanced performances in wet and snow traction, as well as durability
• New silica tread compounds and better lateral water evacuation to help you stop shorter
• Better snow traction than the legendary MICHELIN
®
LTX
®
M/S tire. Greater density of full-depth 3D Active Sipes allow 8% more biting edges than the
MICHELIN ® LTX ® M/S tire
• The new 3D Active Sipes and optimized contact patch of MaxTouch
Construction ™ combine to deliver more miles
Size
(1)
LT215/85R16
LT235/85R16
LT265/75R16
LT235/80R17
LT245/70R17
LT245/75R17
LT265/70R17
Load
Range
E
Catalog
Number
Tread
Depth
32nds
02397 14
E
E
E
E
E
E
27679
14157
00644
31733
14
14
14
14
Overall Width
(1)
in mm wheel in mm in mm
8.5
216 6.0" 115/112/R 30.4
772 5.5" - 7.0" 9.9
251
9.3
236 6.5" 120/116/R 31.7
805 6.0" - 7.5" 10.8
274
23388 14 10.5
267 7.5" 123/120R 31.7
805 7.0" - 8.0" 12.4
315
9.3
9.8
9.8
236
249
249
(1) See Warranty, Notes and Warning on Page 18.
6.5"
7.0"
7.0"
Load/
Speed
Rating
120/117R
119/116R
121/118R
Overall
Diameter
31.8
30.6
31.5
808
776
800
Wheel Width
Range
(1)
6.0" - 7.5"
6.5" - 8.0"
6.0" - 7.5"
Min. Dual
Spacing
10.8
11.3
11.3
273
288
288
14221 14 10.7
272 8.0" 121/118R 31.7
804 7.0" - 8.5" 12.4
316
Revs Per
Mile
(at 45 mph)
684
Max. Tire Load
Single
Max. Tire Load
Dual lbs.
psi kg.
kPa lbs.
psi kg.
kPa
2680 80 1215 550 2470 80 1120 550
656
657
654
681
660
657
3042
3415
3085
3000
3195
3195
80
80
80
80
80
80
1380
1550
1400
1360
1450
1450
550
550
550
550
550
550
2778
3085
2835
2755
2910
2910
80
80
80
80
80
80
1260
1400
1285
1250
1320
1320
550
550
550
550
550
550
LTX
®
A/T2
COMMERCIAL TIRE – OFF-ROAD TRACTION, ON-ROAD COMFORT
MICHELIN
®
LTX
®
A/T2 tires provide excellent off-road traction and durability with uncompromising on-road comfort and handling
• Superior Off-Road Traction – MICHELIN Biting Edges ™ - notched blocks in the tread pattern - dig into nearly any surface for better off-road traction on dirt, mud, gravel, and wet grass
• MICHELIN ® Comfort Control Technology uses computer-optimized design and precision manufacturing to offer greatly reduced vibrations and road noise
• The optimized contact patch shape, provided by MaxTouch Construction ™ , helps deliver exceptionally long tire life under the toughest conditions
Size
(1)
LT215/85R16
LT225/75R16
LT235/85R16
LT245/75R16
LT265/75R16
E
E
E
Load
Range
E
Catalog
Number
Tread
Depth
Overall Width
(1)
Load/
Speed
Rating
Overall
Diameter
Wheel Width
Range
(1)
Min. Dual
Spacing
32nds in
03321 17 8.5
mm wheel
216 6.0" 115/112/R
in
30.4
mm
772 5.5" - 7.0"
in
10.3
mm
262
E 33371 17 8.8
223 6.0" 115/112/R 29.3
744 6.0" - 7.0" 10.2
259
Revs Per
Mile
(at 45 mph)
684
Max. Tire Load
Single
Max. Tire Load
Dual lbs.
psi kg.
kPa lbs.
psi kg.
kPa
2680 80 1215 550 2470 80 1120 550
710 2680 80 1215 550 2470 80 1120 550
03287 17 9.3
236 6.5" 120/116/R 31.7
806 6.0" - 7.5" 10.8
273
38953 17 9.8
248 7.0" 120/116/R 30.5
774 6.5" - 8.0" 11.3
288
26117 17 10.5
267 7.5" 123/120/R 31.7
804 7.0" - 8.0" 12.4
315
656
683
657
3042 80 1380 550 2778 80 1260 550
3042 80 1380 550 2778 80 1260 550
3415 80 1550 550 3085 80 1400 550
(1) See Warranty, Notes and Warning on Page 18.
20
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
XPS RIB
®
COMMERCIAL TIRE – LONG-LASTING, RETREADABLE
MICHELIN
®
XPS Rib
®
tires offer long wear life with steel casing strength and retreadability
• Tread compounds specifically developed for commercial applications help tires last longer so your business dollars go farther
• Added strength and the ability to retread are just two advantages of steel casing
— a feature that keeps trucks where they belong: on the job
Size
(1)
LT215/85R16
LT225/75R16
LT235/85R16
LT245/75R16
Load
Range
E
Catalog
Number
Tread
Depth
32nds
39510 15
E
E
E
08404
13080
26848
14
15
14
Overall Width
(1)
Load/
Speed
Rating
Overall
Diameter
Wheel Width
Range
(1)
Min. Dual
Spacing in mm wheel in mm in mm
8.6
218 6.0" 115/112/Q 30.7
780 5.5" - 7.0" 9.9
251
Revs Per
Mile
(at 45 mph)
681
Max. Tire Load
Single
Max. Tire Load
Dual lbs.
psi kg.
kPa lbs.
psi kg.
kPa
2680 80 1215 550 2470 80 1120 550
8.7
221 6.0" 115/112/Q 29.4
747 6.0" - 7.0" 10.2
259
9.7
246 7.0" 120/116/Q 32.0
813 6.0" - 7.0" 11.0
279
9.6
244 7.0" 120/116/Q 30.6
777 6.5" - 8.0" 11.3
288
706
655
676
2680
3042
3042
80
80
80
1215
1380
1380
550
550
550
2470
2778
2778
80
80
80
1120
1260
1260
550
550
550
(1) See Warranty, Notes and Warning on Page 18.
XPS TRACTION
COMMERCIAL TIRE – OFF-ROAD CONFIDENCE
MICHELIN
®
XPS Traction tires offer extreme off-road traction with steel casing puncture resistance and retreadability
• An aggressive tread design and anti-chip compound help provide the off-road traction needed on gravel and rocky terrain
• Added strength and the ability to retread are just two advantages of steel casing — a feature that keeps trucks where they belong: on the job
Size
(1)
LT215/85R16
LT235/85R16
Load
Range
E
Catalog
Number
Tread
Depth
32nds
35260 17
E 36496 15
Overall Width
(1)
Load/
Speed
Rating
Overall
Diameter
Wheel Width
Range
(1)
Min. Dual
Spacing in mm wheel in mm in mm
8.8
224 6.0" 115/112/Q 30.7
780 5.5" - 7.0" 9.9
251
Revs Per
Mile
(at 45 mph)
681
Max. Tire Load
Single
Max. Tire Load
Dual lbs.
psi kg.
kPa lbs.
psi kg.
kPa
2680 80 1215 550 2470 80 1120 550
9.6
244 6.5" 120/116/Q 32.0
813 6.0" - 7.0" 10.8
273 655 3042 80 1380 550 2778 80 1260 550
(1) See Warranty, Notes and Warning on Page 18.
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
21
22
MICHELIN INFLATION CHARTS FOR LIGHT TRUCK TIRES
To select the proper load and inflation table, locate your tire size in the following pages, then match your tire's sidewall markings to the table with the same sidewall markings. If your tire's sidewall markings do not match any table listed, please contact your MICHELIN ® dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of change, and Michelin continually updates its product information to reflect these changes. Printed material may not reflect the latest load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s maximum pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
Loads are indicated per axle.
WHEEL DIAMETER
16"
LT215/85R16 LRE
PSI kPa
LBS SINGLE
LTX A/T2, LTX M/S2,
XPS RIB,
XPS TRACTION
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LT225/75R16 LRE
LTX A/T2, LTX M/S,
XPS RIB
LBS DUAL
KG SINGLE
KG DUAL
LT235/85R16 LRE
LTX A/T2, LTX M/S2,
XPS RIB,
XPS TRACTION
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LT245/75R16 LRE
LBS DUAL
LTX A/T2, LTX M/S,
XPS RIB
KG SINGLE
KG DUAL
LT265/75R16 LRE
LTX A/T2, LTX M/S2
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
35
5460
1400
2540
3400
6180
1580
250
2990
5440
1990
2520
3000
2880
3400
6180
1580
2880
3820
6960
1780
3240
40
6000
1500
2720
3740
6800
1696
280
3280
5960
1488
2703
3300
3084
3730
6780
1690
33075
4200
7640
1905
3465
45
6520
1625
2960
4060
7380
1842
310
3570
6500
1619
2948
3580
3348
4060
7380
1840
3350
4560
8300
2070
3765
50
7060
1760
3200
4410
8024
2000
350
3880
7060
1760
3200
3880
3640
4410
8024
2000
3640
4940
9080
2240
4120
55
7500
1870
3400
4670
8500
2118
380
4100
7460
1860
3384
4120
3856
4670
8500
2120
3855
5250
9560
2380
4340
65
8600
2120
3900
5246
9524
2380
450
4670
8600
2120
3900
4670
4320
5250
9525
2380
4320
6000
11020
2720
5000
60
7980
1990
3620
4970
9040
2254
410
4360
7940
1978
3602
4380
4100
4960
9020
2250
4090
5580
10160
2530
4610
75
9320
2320
4230
5810
10580
2635
520
5100
9280
2313
4209
5120
4799
5800
10560
2630
4790
6520
11860
2960
5380
70
8880
2215
4030
5530
10060
2508
480
4860
8840
2205
4010
4880
4563
5530
10060
2510
4560
6210
11300
2815
5125
80
9880
2430
4480
6084
11112
2760
550
5360
9880
2430
4480
5360
5040
6084
11112
2760
5040
6830
12340
3100
5600
MAX LOAD & PRESSURE
ON SIDEWALL
S 2680 LBS AT 80 PSI
D 2470 LBS AT 80 PSI
S 1215 KG AT 550 KPA
D 1120 KG AT 550 KPA
S 2680 LBS AT 80 PSI
D 2470 LBS AT 80 PSI
S 1215 KG AT 550 KPA
D 1120 KG AT 550 KPA
S 3042 LBS AT 80 PSI
D 2778 LBS AT 80 PSI
S 1380 KG AT 550 KPA
D 1260 KG AT 550 KPA
S 3042 LBS AT 80 PSI
D 2778 LBS AT 80 PSI
S 1380 KG AT 550 KPA
D 1260 KG AT 550 KPA
S 3415 LBS AT 80 PSI
D 3085 LBS AT 80 PSI
S 1550 KG AT 550 KPA
D 1400 KG AT 550 KPA
WHEEL DIAMETER
17"
LT235/80R17 LRE
LTX M/S2
LT245/70R17 LRE
LTX A/S
LT245/75R17 LRE
LTX M/S2
LT265/70R17 LRE
LTX A/S, LTX M/S2
PSI kPa
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
3380
6160
1570
2860
3540
6440
35
250
3450
6280
1600
2920
1650
3000
3780
6880
1760
3200
4020
7320
1825
3320
4220
7680
45
310
4110
7480
1865
3390
1915
3485
4510
8200
2044
3720
3710
6760
1685
3065
3890
7080
40
280
3790
6900
1720
3130
1765
3210
4150
7560
1880
3440
4410
7940
2000
3600
4540
8160
50
350
4540
8160
2060
3700
2060
3700
4940
9080
2240
4120
4630
8420
2100
3820
4860
8840
55
380
4740
8620
2150
3910
2205
4010
5190
9440
2360
4280
5200
9340
2360
4240
5510
10140
65
450
5360
9880
2430
4480
2500
4600
5820
10720
2640
4860
4920
8960
2230
4065
5160
9400
60
410
5030
9160
2281
4155
2340
4265
5520
10040
2500
4560
5750
10460
2610
4745
6040
11000
75
520
5880
10700
2670
4855
2740
4990
6200
11280
2800
5120
5480
9980
2485
4525
5750
10460
70
480
5610
10220
2545
4635
2608
4745
6010
10940
2730
4960
6000
11020
2720
5000
6170
11340
80
550
6170
11340
2800
5140
2900
5280
6390
11640
2900
5280
MAX LOAD & PRESSURE
ON SIDEWALL
S 3085 LBS AT 80 PSI
D 2835 LBS AT 80 PSI
S 1400 KG AT 550 KPA
D 1285 KG AT 550 KPA
S 3000 LBS AT 80 PSI
D 2755 LBS AT 80 PSI
S 1360 KG AT 550 KPA
D 1250 KG AT 550 KPA
S 3195 LBS AT 80 PSI
D 2910 LBS AT 80 PSI
S 1450 KG AT 550 KPA
D 1320 KG AT 550 KPA
S 3195 LBS AT 80 PSI
D 2910 LBS AT 80 PSI
S 1450 KG AT 550 KPA
D 1320 KG AT 550 KPA
Truck Tires
23
24
TREAD PATTERN DESIGNATIONS
Michelin uses specific numbers or letters to identify different types of tread patterns or casing construction.
®
®
X O n e X Z Y 3
Prefix
For example:
MICHELIN
®
Radial
X
= MICHELIN
®
Radial
MICHELIN
®
Radial
Application
Position
Index
(Used to denote product evolution or attributes)
Prefix
Position
Application
Index
X One
®
X COACH
X MULTI
X WORKS
= Wide Single Tire Replacing 2 Traditional Duals
= Highway Coach
= Regional
= On/Off Road
D
= Drive
T
= Trailer
Z
= All Position
F
= Front (Steer)
A
= Highway Applications
E
= Regional Applications
U
= Urban
Y
= 80% On-Road Use, 20% Off-Road Use
L
= 80% Off-Road Use, 20% On-Road Use
= Anti-chip / Cut-resistant Compound
HT
= High Torque
ENERGY
= Fuel Efficient
M/S
S
= Mud and Snow
= Severe Service
TIRE APPLICATIONS
The specific tread design used should only be considered after the vehicle type and user vocation has been examined.
There are several categories of tire service applications:
A
HIGHWAY
Heavy loads and high speeds for extended periods of time.
Primarily interstate or divided highway.
REGIONAL
E
Medium to heavy loads, frequently on 2-lane roads.
Vehicles generally return to home base at night.
URBAN
U
Stop-and-go delivery ... service within a limited radius – metro and suburban.
ON/OFF ROAD
Y
Heavy loads and slower speeds, operating on a mixture of improved secondary and aggressive road surface.
OFF ROAD
L
Very heavy loads normally on poor or unimproved surfaces.
PRODUCT SEGMENTATION
MICHELIN
SEGMENTS
VOCATIONS
A Long Haul • Truckload Carrier
• Public Utilities
• School Bus
E Regional
• Food Distribution
• Petroleum Delivery
• Courier and Delivery Service
U Urban
• Manufacturing
• Auto Carriers
• Urban Buses
• Sanitation and Refuse
Y On/Off Road • Construction and Mining
• Forestry and Logging
L Off Road
• Oil Field
–
U
A
Urban
Application Stress
+
Long Haul
E
Regional
–
L
Off Road
Y
On/Off Road
+
Surface Aggression
25
MICHELIN
®
TRUCK TIRE REFERENCE CHART
STEER / ALL-POSITION TIRES
XZA3
®
+ EVERTREAD
™
XZA
®
(365/70R22.5)
XZA2
®
Energy
***
• Ultra-fuel-efficient tire
(1) that delivers our longest mileage in line haul steer applications
• Dual Compound Tread delivers more mileage without compromising ultrafuel-efficiency and retreadability
• Directional tread with enhanced shoulder rib designed to deliver even wear to the end
• 3-Retread Limited Warranty
**
LH R O/O U
XZA
®
-1+
• Advanced Technology ™ compounding offers excellent fuel economy*
• Engineered for irregular wear resistance
• Over 7,000 trapezoidal micro sipes on groove edges help break water surface tension to promote traction on wet and slippery road surfaces
• Original shoulder groove design offers enhanced resistance to uneven shoulder wear
LH R O/O U
XZA
®
1
***
• Optimized channel design allows for long tread life and minimized irregular wear
• Low rolling resistance compounds for fuel economy* in highway service
• Optimized for steer axle service
LH R
XZE
®
O/O U
• Decoupling groove built for resistance to irregular wear
• Optimized for steer axle highway service
• Groove wall sipes help inhibit onset of irregular wear and improve wet traction
• Optimized for all-position heavy axle loads
• Variable groove angles help reduce irregular wear and improve overall performance
LH R
XZE2
™
O/O U LH R O/O
XZE
®
2 /XZE
®
2+
U
• Solid shoulders to help resist scrub
• Curb guards on sidewalls
• Deep, wide tread
• Full depth siping for efficient traction
• Compounds for scrub resistance
• Groove bottom protectors help defend against stone drilling
LH R
XRV
®
O/O U
• Enhanced application specific compound to promote resistance to aggression and longer tread life
• Matrix ™ Siping technology and micro sipes protect against irregular wear
• Zig-zag grooves and sipes help increase traction in new and worn tire conditions
• North American design
• Buttressed shoulder helps resist wear in high scrub applications
• Full-depth sipes offer exceptional traction throughout the usable life of the tire
• European design
• Exclusively for motorhome use
• Cool running tread design
• Excellent ozone resistance sidewalls
• Stable tread with cool running compound engineered to reduce squirm and lower heat for improved handling and durability
26
LH R O/O U LH R O/O U LH R O/O U
*
Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
**
7/7/3 Manufacturer's Limited Casing Warranty: 700,000 miles, 7 years, or 3 retreads for MICHELIN
®
XZA3
®
, XZA3
®
Antisplash
™
, XDA3
®
, and XDA
®
Energy tires only.
See limited warranty for details.
***
“No bus shall be operated with regrooved, recapped or retreaded tires on the front wheels.” US Code of Federal Regulations: Title 49, Transportation; Part 393.75.
Exceeding the legal speed limit is neither recommended nor endorsed.
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
XZA
®
MICHELIN
®
TRUCK TIRE REFERENCE CHART
STEER / ALL-POSITION TIRES
X One
®
XZY
®
3
XZY
®
3
• Excellent steer tire for regional operation
• Designed for long mileage and even tread wear
• Zig-zag design for true all-position use
LH R O/O
XZY
®
3
WIDE BASE
U
• Long treadlife and outstanding chip and cut resistance in on/off road service
• Flat, stable contact area for long, even wear provided by Infini-Coil
™ Technology
• Enhanced protection against stone drilling from variable pitch groove walls and groove bottom protectors in center grooves
LH R O/O U
X One
®
XZU
®
S
• Tread compound offers excellent protection against aggression, chipping and scaling
• Extra robust casing construction for excellent retreadability
• Maximized soft soil and mud traction throughout the tire life
LH R O/O
XZU
®
S2
U
• Casing durability and protection from increased shoulder and sidewall thickness
• Improved traction and floatation in soft soil and mud
• Great resistance to shocks, bruising and penetrations
• Optimized for weight savings in urban and regional operation
• Enhanced protection against stone drilling from variable pitch groove walls and groove bottom protectors in all grooves
• Reinforced bead package for resistance to heat
• 23 ⁄ 32nds original tread depth
• Infini-Coil Technology
™
LH R O/O U
• Up to 20% increase in removal mileage (1) due to new 4-rib tread design
• Improved retreadability robust tread design
• Increased resistance (1)
(1) due to a more to high brake temperatures common in urban stop/start service due to updated bead design
(1) When compared to the MICHELIN ® XZU ® S tire.
LH R O/O U LH R O/O
XZU
®
S
WIDE BASE
U
• Significant increase in tread life with new tread compounds and increased tread volume
• 65 mph* rating with optimized scrub resistance and reduced operating temperatures in the crown area
• Fosters reduced mounting and dismounting damages with Michelin's rounded bead toe design
LH R O/O U
* Exceeding the legal speed limit is neither recommended nor endorsed.
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
27
XZU
®
3
*
MICHELIN
®
TRUCK TIRE REFERENCE CHART
STEER / ALL-POSITION TIRES
XZU
®
2
*
X COACH XZ
*
• Optimized for urban operation with frequent starts and stops
• Extended retreadability with extra robust casing and bead design
• Matrix ™ sipes help provide excellent traction and even wear throughout life of tire
• Helps improve bead durability from extra long metallic chafer
LH R O/O
XFE
WIDE BASE STEER
U
• Built-up sidewall protectors provide protection against most curb damage
• Sidewall wear indicators promote timely tire rotation for long casing life and enhanced retreadability
• Wide, deep circumferential grooves and full-depth sipes help promote excellent traction throughout the life of the tire
LH R O/O U
• Charter bus tire designed for mileage safety and comfort
• New tread design helps deliver up to
15% higher mileage, while maintaining superior performance (1)
• Central zig-zag tread grooves help deliver improved grip for a shorter braking distance on wet or icy roads (1)
(1) When compared to the MICHELIN ® XZA2 ® Energy tire.
LH R O/O U
• Dual compound tread rubber helps ensure cool operating temperatures and helps keep tire wear rate low
• Deep, wide channels help provide excellent water evacuation throughout the life of the tire
• Lateral siping enhance traction and braking
LH R O/O U
28
*
“No bus shall be operated with regrooved, recapped or retreaded tires on the front wheels.” US Code of Federal Regulations: Title 49, Transportation; Part 393.75.
Exceeding the legal speed limit is neither recommended nor endorsed.
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
MICHELIN
®
TRUCK TIRE REFERENCE CHART
DRIVE TIRES
X One
®
XDA
®
Energy
X One
®
XDN
®
2
XDA
®
5
• The most fuel efficient* drive tire available for North American long haul trucks
• Matrix
™
Siping technology helps provide exceptional traction on dry and slippery surfaces. The 3D Matrix
™ sipes lock together for the stability normally associated with solid tread blocks
• Engineered to replace duals
• Directional tread design
LH R O/O U
XDA3
®
/XD2
®
• Multiple tread compounds to keep the casing cooler and optimize retreadability
• Infini-Coil Technology ™ incorporates 1⁄4 mile of steel cable
• Extra wide tread width for excellent stability and long wearlife
• Weight savings of approximately 371 lbs per tractor, when compared to the
MICHELIN ® XDN ® 2 tire
LH R O/O U
XDA
®
Energy
• Regenerating tread features from
MICHELIN
®
Durable Technologies for excellent traction throughout the life of the tire
• Matrix
™
Siping technology helps provide exceptional traction on dry and slippery surfaces
• Extra-wide tread width and solid shoulders give excellent stability, handling, and long wear life
LH R O/O U
XDN
®
2/XDN
®
2 Grip
• Ultra-fuel efficient* drive-axle tire designed for long wear and quiet ride
• 7/7/3** manufacturer’s limited casing warranty
• Efficient stone rejection from variable groove wall angles
• 26 ⁄ 32nds original tread depth
LH R O/O
X MultiWay XD
U
• Advanced Technology
™ tread compounds for outstanding fuel efficiency*
• Alternating groove wall angles help resist stone retention and promote improved traction throughout the life of the tire
• 7/7/3** manufacturer’s limited casing warranty
• All-weather highway drive tire
• Matrix
™ sipes help deliver exceptional traction and excellent wear
• 27 ⁄ 32nds original tread depth
• XDN
®
2 Grip is directional tread
• Wide open shoulder grooves deliver additional traction balanced with tread life
LH U LH R O/O
XDE
®
M/S
U R O/O
XDE
®
2+
• Excellent durability and a new tread pattern that reduces stone retention
• Improved grip on wet and slippery roads due to double wave and raindrop sipe technologies.
• Increased mileage
Technologies.
(1) from a deeper, wider tread with MICHELIN ® Durable
(1) When compared to the MICHELIN ® XDE ® 2+ tire.
LH R O/O U
• All-purpose drive tire for regional/P&D
• applications
• Open shoulder design offers excellent traction, especially in loose soil and mud
Versions feature chip/cut resistant compound
• Tread block design featuring five longitudinal sipes for optimized grip and traction
• New damage resistant rubber compound for improved removal mileage
• Tread designed to minimize irregular wear
• Directional tread pattern to minimize stone retention
LH R O/O U LH R O/O U
* Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
**
7/7/3 Manufacturer's Limited Casing Warranty: 700,000 miles, 7 years, or 3 retreads for MICHELIN ® XZA3 ® , XZA3 ® Antisplash ™ , XDA3 ® , and XDA ® Energy tires only.
See limited warranty for details.
Exceeding the legal speed limit is neither recommended nor endorsed.
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
29
MICHELIN
®
TRUCK TIRE REFERENCE CHART
DRIVE TIRES
X Works XDY
®
XDY
®
3 XDY-2
™
• Improved durability (1) due to a more robust center region of the tread
• 10% improved removal mileage (1) to the wider tread width
• More efficient mud evacuation (1) due due to directional tread
• Excellent protection from shocks, snags and impacts due to extra-thick sidewall
(1) When compared to the MICHELIN ® XDY ® 3 tire.
LH R O/O U
XDY-EX2
™
• Tread compound offers excellent protection against aggression, chipping and scaling in mixed service
• Groove bottom protectors help guard against stone penetrations
• Massive open shoulder design helps provide maximized traction
• 31 ⁄ 32nds original tread depth
LH R O/O U
XDS
®
/ XDS
®
2
(Standard Sizes)
• Deep directional tread optimized for traction and mileage in severe, on/off road service
• Chip and cut resistant compound
• Excellent casing protection
• Sidewall protection to help minimize damage
LH R O/O
XDS
®
2
(19.5" Wheel)
U
• Improved off-road and mud traction due to a more aggressive tread redesign with more void area
• Excellent crown durability and retreadability due significantly reduced stone retention
• Excellent protection from shocks, snags and impacts due to extra-thick sidewall
LH R O/O U
• Rugged directional tread design helps boost snow and ice traction
• 3D Matrix
™
Siping helps provide exceptional traction on dry and slippery surfaces
• Over 450 full-depth, zig-zag sipes enhance block stability and provide extra bite, especially in deep snow
LH R O/O U
• Outstanding traction on wet and slippery surfaces from over 700 3D Matrix ™ sipes
• Optimized for stone rejection with variable angled groove walls and groove bottom protectors
• 19.5" sizes
• 18 ⁄ 32nds original tread depth
• Non-directional tread
LH R O/O U
30
Exceeding the legal speed limit is neither recommended nor endorsed.
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
MICHELIN
®
TRUCK TIRE REFERENCE CHART
TRAILER TIRES
X One
®
XTA
®
X One
®
XTE
®
XT-1
®
• Ultra-fuel efficient* with Infini-Coil
Technology ™
• Engineered to replace duals in fuel and weight sensitive long haul trailer applications
• 13 ⁄ 32nds original tread depth
• Four decoupling grooves to resist irregular wear
LH U R
XTA
®
O/O
• Trailer tire designed to replace duals in high scrub applications
• Helps deliver substantial weight savings versus comparable dual assembly
• Infini-Coil Technology ™ belt promotes excellent vehicle stability
• Deep, 16 ⁄ 32nds original tread depth
• Fuel efficient* line haul trailer tires
• 12 ⁄ 32nds original tread depth
• Tread groove design helps against irregular wear and provides good wet weather performance
LH R O/O
XTA
®
Energy
U
LH R O/O
XTA
®
2 Energy/
XTA ® 2
WIDE BASE
U
• Optimized for low bed trailer application
• 15" and 17.5" sizes
LH R
XTE
®
O/O U
• Ultra-fuel efficient* long haul trailer tire
• Available in low profile 22.5"
• Designed for long, smooth wear
• 13 ⁄ 32nds original tread depth
• Four circumferential grooves for excellent wet weather performance
LH R
XTE2
®
O/O U
• Advanced Technology
™ compounding offers excellent fuel economy*
• Designed to help provide even wear and cool running casing in high cube storage service
• 17.5" and 19.5" sizes
• Tread groove design helps against irregular wear and provides good wet weather performance
LH R O/O U
XTY
®
2
• Long tread life from scrub resistant compound
• Extra thick casing protection from sidewall and curb guards
• Robust Michelin quality casing
• 16 ⁄ 32nds original tread depth
• Optimized for low platform and specialty trailer applications
• Solid shoulders help resist lateral scrub
• Compound for cut resistance and cool operating temperatures
• Deep channels and lateral siping enhance traction and braking in adverse weather
• Open tread design to help resist stone retention
• Cut and chip resistant compound
• Reinforced belt package for added retreadability
LH R O/O U LH R O/O
* Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
Exceeding the legal speed limit is neither recommended nor endorsed.
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
U LH R O/O U
31
XZA
®
4
MICHELIN
®
TRUCK TIRE REFERENCE CHART
SPECIAL APPLICATION TIRES
XZY
®
XZL
™
/XZL+
™
/
XZL
™
WIDE BASE
• Optimized for mobile crane applications
• 50 mph* speed rating
• Offset block shoulder design promotes soft soil mobility
• Application specific compound to help resist aggression from chipping and cutting
• Zig-zag groove angles help resist stone retention and drilling
LH R
XML
™
O/O U LH R
XDL
®
O/O U
• High traction and floatation capability
• Excellent sidewall protection
• Long, even tread wear
• Anti-chip compound
• All-wheel positions
LH U R
XS
™
O/O
• All-Terrain non-directional computer enhanced tread design delivers exceptional soft soil mobility, through enhanced self-cleaning capabilities
• Offset shoulder designed for increased traction in soft soil
LH R O/O U
• Off-road drive tire
• Designed for excellent mileage and protection
• Chip and cut resistant compounding
• 12.00R24 size
• Restricted to 50 mph*
• Deep 38 ⁄ 32nds original tread depth
LH R O/O U
• Soft soil, all-position radial for special service such as Emergency Response vehicles
• Tread design optimized to minimize sandy surface disturbance
• Efficient grip with exceptional floatation capabilities
LH R O/O U
32
* Exceeding the legal speed limit is neither recommended nor endorsed.
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
SIZE
10.00R15
215/75R17.5
245/70R17.5
225/70R19.5
245/70R19.5
265/70R19.5
445/45R19.5
11R22.5
12R22.5
235/80R22.5
255/70R22.5
255/80R22.5
275/70R22.5
275/80R22.5
295/60R22.5
295/80R22.5
305/70R22.5
315/80R22.5
445/50R22.5
455/55R22.5
11R24.5
275/80R24.5
305/75R24.5
LOAD
RANGE
TREAD NAME
J
J
XTA
XTA
J
XTA2 ENERGY
F
XRV
F
XRV
70667
82636
78370
58916
67140
J
XTA2 ENERGY
83728
M
XTA2 ENERGY (wb)
69910
G
G
G
XD4
XDA3
XDA5
G
XDN2
G
XT-1
G
XZA-1+
G
XZA3
+
EVERTREAD
H
XDN2
H
XZA3
+
H
XDN2
EVERTREAD
G
XRV
H
XD2
87033
96666
73154
72805
02078
06032
25041
64321
38479
51753
87511
74493
G
J
G
G
G
XRV
XZA2 ENERGY
XD4
XDA ENERGY
XDA3
G
XDA5
G
XDN2
G
XT-1
G
XTA ENERGY
G
XZA-1+
G
XZA3
+
H
XZA3
+
J
H
J
EVERTREAD
EVERTREAD
XZA2 ENERGY
XZA2 ENERGY
X Coach XZ
26413
39174
33215
76807
28798
L
XRV
L
XDN2 GRIP
L
XZA1
93499
04355
47056
L
XZA2 ENERGY
76184
L
X One XDA ENERGY
21881
L
X One XDN2
L
X One XTA
36587
49694
59634
90059
82292
42564
73095
76747
63465
19518
73176
18678
L
X One XTE
59070
L
X One XDA ENERGY
57105
L
X One XDN2
31535
L
X One XTE
G
XDA5
30574
73177
G
G
H
XDN2
XT-1
G
XZA-1+
G
XZA3
+
XDA3
H
XDA5
H
XDN2
G
XDA3
EVERTREAD
87459
22754
10274
27983
71551
G
G
G
J
XDA5
XDN2
XT-1
G
XZA-1+
G
XZA3
+
XDA5
EVERTREAD
03713
87129
68934
73166
75684
29684
30968
28791
30987
PRODUCT AVAILABILITY
CATALOG
NUMBER
17
24
27
13
16
28
18
19
19
16
16
19
30
27
12
13
18
16
18
30
26
26
30
26
30
27
12
14
15
13
13
14
15
18
19
27
16
25
18
19
27
27
12
18
19
26
16
24
27
16
30
30
27
12
18
30
27
26
19
30
LONG HAUL
TREAD
DEPTH
32ND
AWP
WHEEL POSITION
STEER DRIVE TRAILER
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
DIREC-
TIONAL
䡲
䡲
䡲
䡲
䡲
䡲
䡲
RV
USE
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
COMMENTS
Cut & chip resistant tread compound
33
34
SIZE
10R17.5
215/75R17.5
235/75R17.5
8R19.5
225/70R19.5
245/70R19.5
265/70R19.5
285/70R19.5
305/70R19.5
10.00R20
9R22.5
10R22.5
11R22.5
12R22.5
235/80R22.5
255/70R22.5
255/80R22.5
275/70R22.5
275/80R22.5
295/60R22.5
295/80R22.5
365/70R22.5
11R24.5
275/80R24.5
305/75R24.5
LOAD
RANGE
TREAD NAME
G
XZA
G
XZE2
J
XTE2
F
F
XZA
XDS2
F
XZE
G
XDS2
G
XZE
G
XZE
H
XDS2
H
XZE
G
XDE2+
G
XZE2+
H
XDE2+
J
J
H
XZA
H
XZE2+
XTE2
XZA
H
XZE2
F
F
XZE
XZE
G
XDE M/S
G
XZE
G
XDE M/S
G
XTE
G
XZE2
H
XDE2+
H
XDE M/S
H
XDS2
H
XZE2
H
XDS
H
XZE
G
XZE
H
XZE
G
XZE
J
XZE2+
G
XDE M/S
G
G
H
XTE
XZE2
XZE
17706
55895
01637
H
XDE2+
J
X MULTIWAY XD
36993
06376
H
XZE2+
L
XZA
81993
71842
62208
85335
68749
61737
94390
78395
61426
73493
21307
78390
37332
73927
05359
67042
13346
68419
37840
50505
01889
75473
79883
87357
99141
G
XDE M/S
G
XTE
G
XZE2
H
XDE M/S
H
XDS2
H
XZE2
G
XTE
G
XZE2
J
XZE2
51273
07025
91867
46695
06613
88507
33965
75519
67251
91043
66338
05797
75997
95319
46194
79456
05008
19502
01963
60893
91423
81473
00691
PRODUCT AVAILABILITY
CATALOG
NUMBER
26
16
22
28
23
20
19
16
22
22
18
20
19
26
28
25
22
16
22
22
26
22
19
25
28
26
22
26
16
22
18
21
23
21
16
18
18
18
18
18
20
17
21
17
18
17
18
19
15
16
18
TREAD
DEPTH
32ND
REGIONAL
WHEEL POSITION
AWP STEER DRIVE TRAILER
16
16
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
DIREC-
TIONAL
䡲
䡲
䡲
䡲
䡲
䡲
RV
USE
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
COMMENTS
Cut & chip resistant tread compound
Cut & chip resistant tread compound
Cut & chip resistant tread compound
Cut & chip resistant tread compound
SIZE
325/85R16
G20 (14.00R20)
14.00R20
16.00R20
395/85R20
475/80R20
24R20.5
24R21
11R22.5
12R22.5
275/70R22.5
315/80R22.5
385/65R22.5
425/65R22.5
445/65R22.5
455/55R22.5
12.00R24
11R24.5
12R24.5
PRODUCT AVAILABILITY
LOAD
RANGE
ON / OFF ROAD AND SPECIALTY TIRES
TREAD NAME
CATALOG
NUMBER
TREAD
DEPTH
32ND
AWP
WHEEL POSITION
STEER DRIVE TRAILER
DIREC-
TIONAL
RV
USE
D
XML
37984 21
䡲
M
XZA4
M
XZL
M
XZL
70870
59177
06306
18
29
34
䡲
䡲
䡲
䡲
J
J
G
XML
J
XZL
XZL+
XML
H
XS
H
XZL
G
XZY3
H
X WORKS XDY
H
XDY-2
99131
54331
94675
80341
23002
76025
84455
89725
77416
21
31
24
30
30
30
33
26
30
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
H
XDY3
H
XZY3
H
XZY3
J
XTY2
L
XDY3
L
XZY3
J
XZY3 (wb)
L
XFE (wb) (Steer)
L
XFE (wb) (Steer)
L
XZL (wb)
97079
80927
47947
42407
40302
40200
53779
36991
11829
53254
31
23
22
21
31
24
24
21
21
26
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
L
XZY3 (wb)
L
XZL (wb)
L
XZY3 (wb)
M
XFE (wb) (Steer)
M
X One XZY3
H
XZY
J
XDL
G
XZY3
H
XDY-2
40321
84103
83691
10805
11629
29163
30049
47945
76789
23
23
38
24
30
23
27
23
21
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲
䡲 䡲
H
X WORKS XDY
H
XDY3
H
XDY-EX2
H
XZY3
H
XDY3
H
XZY3
90022
47962
23274
79250
47966
47951
30
31
32
24
31
24
䡲
䡲
䡲
䡲
䡲
COMMENTS
35
36
SIZE
11R22.5
12R22.5
275/70R22.5
305/70R22.5
305/85R22.5
315/80R22.5
425/65R22.5
455/55R22.5
305/75R24.5
LOAD
RANGE
TREAD NAME
J
L
H
XZU3
J
XZU2
XZU2
XZU2
J
L
XZU3
XZU S2
L
XZU S wb
M
X One XZU S
J
XZU3
PRODUCT AVAILABILITY
CATALOG
NUMBER
TREAD
DEPTH
32ND
URBAN
WHEEL POSITION
AWP STEER DRIVE TRAILER
25
䡲
32873
43714
57317
95623
24
21
22
䡲
䡲
䡲
DIREC-
TIONAL
56332
77510
03785
28513
60143
26
23
23
23
22
䡲
䡲
䡲
䡲
䡲
RV
USE
COMMENTS
XZA3
®
+
Evertread
™
HIGHWAY APPLICATIONS
Directional tread
Next generation ultra-fuel-efficient
(2)
radial that delivers our longest original tread life in long haul steer service.
• Even wear to the end of tread life due to directional miniature sipes in the groove walls (directional to half life)
• Get more mileage without compromising fuel efficiency
(2) with the patent-pending
Dual Compound Tread
• Maximum retreadability backed up with a 3-Retread Manufacturing Limited Casing
Warranty: 3 retreads or 700,000 miles or 7 years for XZA3 ®
+
EVERTREAD ™ when retreaded by an authorized Michelin Retread Technologies (MRT) Dealer only
• Approved for use on EPA SmartWay
SM certified equipment and meets California’s
CARB requirements
• Optimum handling and responsiveness due to a wide, flat tread
• Excellent casing protection from bruising and penetrations with a full-width, elastic protector ply
Size
11R22.5
(1)
11R22.5
(1)
275/80R22.5
(1)
275/80R22.5
11R24.5
(1)
275/80R24.5
(1)
(1)
H
G
H
Load
Range
G
Catalog
Number
73162
Tread
Depth
Max.
Speed
(*)
32nds mph
19
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
75 19.3
489 41.3
1048 11.1
282
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
8.25, 7.50
12.5
318 502 6175 105 2800 720 5840 105 2650 720
G
G
47488
73146
69192
73181
73173
19
19
19
19
19
75
75
75
75
75
19.1
18.6
18.7
20.2
19.3
485
473
474
513
491
41.3
40.1
40.1
43.3
41.3
1049
1018
1018
1099
1049
11.2
10.9
10.9
11.1
10.7
284
277
278
282
272
8.25, 7.50
8.25, 7.50
8.25, 7.50
8.25, 7.50
8.25, 7.50
12.5
12.2
12.2
12.5
12.2
318
311
311
318
311
503
518
518
479
501
6610
6175
7160
6610
6175
120
110
120
105
110
3000
2800
3250
3000
2800
830
760
830
720
760
6005
5675
6610
6005
5675
120
110
120
105
110
2725
2575
3000
2725
2575
830
760
830
720
760
(1) Directional tread design.
(2) Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
XZA
®
HIGHWAY APPLICATIONS
Fuel-efficient
(1)
, all-position radial designed for long life in highway steer axle service
• Advanced Technology ™ compounding helps reduce rolling resistance promoting low fuel consumption (1) in balance with mileage, durability and casing endurance
• Over 7,000 trapezoidal micro sipes on groove edges help break water surface tension to promote traction on wet and slippery surfaces
• Original shoulder groove design offers enhanced resistance to uneven shoulder wear
Size
365/70R22.5
Load
Range
L
Catalog
Number
71842
Tread
Depth
32nds
19
Max.
Speed (*) mph
75
Loaded Radius in.
19.6
mm
497
Overall Diameter Overall Width (‡) in.
42.5
mm
1080
in.
14.3
(1) Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
mm
363
Approved Wheel
10.50
Revs
Per Mile
490
lbs.
Max. Load and Pressure
Single psi kg.
kPa
10500 125 4750 860
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
37
XZA2
®
ENERGY
HIGHWAY APPLICATIONS
Fuel-efficient
(3)
, all-position radial designed for long life in highway steer axle service
(6)
• Unique intermediate rib design helps combat the onset of irregular wear in highway service
• Exceptional handling and responsiveness through optimized shoulder design
• Traction and lateral control offered by miniature sipes and variable groove angles
• The 295/60R22.5 is an ultra-low profile and a full 4"shorter than the 275/80R22.5 with over 1,100 lbs of additional carrying capacity in single fitment
1 2
- 295/60R22.5
Size
275/70R22.5
(1)
295/60R22.5
(2)
295/80R22.5
(1)
Load
Range
J
J
Catalog
Number
90059
Tread
Depth
Max.
Speed
(*)
32nds mph
18
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
75 17.6
448 38.0
966 10.9
277 7.50, 8.25
11.9
303 545 6940 130 3150 900 6395 120 2900 830
33215 16 65 16.7
424 36.1
918 11.4
290 9.00
(4)
13.0
329 575 7390 130 3350 900 6780 130 3075 900
H 76807 16 75 19.1
486 41.3
1048 11.8
299 9.00, 8.25
13.2
335 503 7830 120 3550 830 6940 120 3150 830
315/80R22.5
(1) L 76184 17 75 19.5
496 42.3
1074 12.5
318 9.00, 8.25
(5) 13.8
351 492 9090 130 4125 900 8270 130 3750 900
(1, 2) Tread design as indicated above the tire picture.
(3) Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
(4) For further instructions on proper usage of the 295/60R22.5, see Page 95.
(5) For use with 8.25 x 22.5 wheels, see Page 93.
(6) “No bus shall be operated with regrooved, recapped or retreaded tires on the front wheels.” US Code of Federal Regulations: Title 49, Transportation; Part 393.75.
XZA
®
-1+
HIGHWAY APPLICATIONS
All-position radial optimized for steer axles in highway and limited regional service
• The “original” shoulder decoupling groove helps resist irregular wear in slow wear rate applications
• Miniature groove wall sipes help inhibit the onset of irregular wear while helping to improve traction on wet surfaces
Size
11R22.5
275/80R22.5
11R24.5
275/80R24.5
G
G
G
Load
Range
G
Catalog
Number
Tread
Depth
Max.
Speed
(*)
32nds mph
06032 18
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
75 19.3
489 41.3
1049 11.1
281
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
8.25, 7.50
12.5
318 501 6175 105 2800 720 5840 105 2650 720
18678
10274
30968
18
18
18
75
75
75
18.7
20.2
19.3
474
513
489
40.1
43.3
41.3
1019
1099
1049
10.9
11.1
10.7
276
282
271
8.25, 7.50
8.25, 7.50
8.25, 7.50
12.2
12.5
12.2
311
318
311
516
479
501
6175
6610
6175
110
105
110
2800
3000
2800
760
720
760
5675
6005
5675
110
105
110
2575
2725
2575
760
720
760
38
Note: Wheel listed first is the measuring wheel.
(†) Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN
® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
XZA
®
1
HIGHWAY APPLICATIONS
Even-wearing, all-position tire optimized for heavy axle loads in highway and limited regional service
(1)
• Miniature sipes in groove walls and variable groove angles help reduce irregular wear and improve overall performance
• Full-width elastic protector ply helps protect the working plies from bruising and penetrations
• Flat crown radius helps enhance wear and treadlife
Size
Load
Range
L
Catalog
Number
Tread
Depth
Max.
Speed
(*)
32nds mph
47056 18 75
Loaded
Radius in.
19.6
mm
499
Overall
Diameter in.
42.5
mm
1079
Overall Width
(‡) in.
12.5
mm
317
Approved
Wheels
(Measuring wheel listed first.)
9.00, 8.25
(2)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
13.8
351 489 9090 130 4125 900 8270 130 3750 900 315/80R22.5
(1) “No bus shall be operated with regrooved, recapped or retreaded tires on the front wheels.” US Code of Federal Regulations: Title 49, Transportation; Part 393.75.
(2) For use with 8.25 x 22.5 wheels, see Page 93.
XZE
®
HIGHWAY & REGIONAL APPLICATIONS
Exceptional all-position radial with extra-wide, extra-deep tread designed to help deliver our best wear in high scrub applications
• Beefy, buttressed shoulders help resist tearing and accelerated wear in high scrub applications
• Extra strong curb guards help protect sidewalls against most impacts and abrasions for long casing life
• Groove bottom protectors help deliver additional defense against stone drilling
• Application specific high scrub compound (chip and cut resistance in LRH versions with designation) make the MICHELIN ® XZE ® tire our longest wearing regional steer tire
• Deep, wide tread and optimized footprint shape help deliver long, even tread wear
Size
225/70R19.5
225/70R19.5
245/70R19.5
245/70R19.5
9R22.5
10R22.5
10R22.5
12R22.5
235/80R22.5
255/70R22.5
255/80R22.5
275/80R22.5
Load
Range
F
H
G
H
G
H
F
F
G
G
G
H
Catalog
Number
81473
Tread
Depth
Max.
Speed
(*)
32nds mph
17
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
75 14.9
378 32.2
819 8.9
227
91043
66338
75997
75473
79883
99141
85335
68749
61737
94390
01637
17
18
18
18
21
21
22
19
18
20
22
75
75
75
75 17.8
452 38.2
970 8.9
226 6.00, 6.75, 7.50
10 254 543 4540 105 2060 720 4300 105 1950 720
75 18.7
475 40.1 1018 10.2
259 6.75, 7.50, 8.25
11.1
282 517 5205 100 2360 690 4940 100 2240 690
75 18.7
475 40.1 1018 10.2
259 6.75, 7.50, 8.25
11.1
282 517 5675 115 2575 790 5355 115 2430 790
75
75
75
75
75
With chip and cut resistant tread compound.
14.9
15.6
15.6
19.8
17.4
17.2
17.9
18.7
378
395
396
503
443
437
455
475
32.2
33.6
33.6
819
853
853
8.9
9.7
9.7
42.6 1082 11.4
37.4
36.7
38.5
949
932
979
9.3
10.2
10
40.2 1022 11.1
227
247
247
290
236
260
254
282
Approved
Wheels
(Measuring wheel listed first.)
6.00, 6.75
6.00, 6.75
6.75, 7.50
6.75, 7.50
8.25, 9.00
6.75, 7.50
8.25, 7.50
7.50, 8.25
8.25, 7.50
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
9.7
246 646 3640 95 1650 660 3415 95 1550 660
9.7
246 646 3970 110 1800 760 3750 110 1700 760
10.7
272 619 4540 110 2060 760 4300 110 1950 760
10.7
272 619 4940 120 2240 830 4675 120 2120 830
13.2
10.3
11.6
11.3
12.2
335
262
295
287
311
486
555
563
538
516
7390
4675
5510
5205
7160
120
110
120
110
120
3350
2120
2500
2360
3250
830
760
830
760
830
6780
4410
5070
4805
6610
120
110
120
110
120
3075
2000
2300
2180
3000
830
760
830
760
830
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
39
XZE2
™
HIGHWAY & REGIONAL APPLICATIONS
Exceptional regional, all-position radial with extra-wide, extra-deep tread designed to help deliver our best wear in high scrub applications
• Enhanced application specific compound to promote resistance to aggression and longer tread life
• 6% wider tread for improved wear and handling
(1)
• Matrix ™ Siping technology and micro sipes protect against irregular wear
• Zig-zag grooves and sipes help increase traction in new and worn tire conditions
• North American design
Size
11R22.5
11R22.5
275/80R22.5
11R24.5
11R24.5
275/80R24.5
Load
Range
G
H
G
G
H
G
Catalog
Number
78390
Tread
Depth
Max.
Speed
(*)
32nds mph
22
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
75 19.3
491 41.3
1050 11.2
285
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
8.25, 7.50
12.5
318 501 6175 105 2800 720 5840 105 2650 720
67042 22
55895
91867 22
88507 22
75519
22
22
75 19.2
488 41.4
1051 11.3
286
75
75
(1) When compared to the MICHELIN ® XZE ® tire.
18.6
19.3
473
490
40.2
41.3
1021
1050
11.1
10.8
282
75 20.3
516 43.5
1104 11.1
281
75 20.3
516 43.5
1104 11.1
281
274
8.25, 7.50
12.5
318 501 6610 120 3000 830 6005 120 2725 830
8.25, 7.50
12.2
311 517 6175 110 2800 760 5675 110 2575 760
8.25, 7.50
12.5
318 476 6610 105 3000 720 6005 105 2725 720
8.25, 7.50
12.5
318 476 7160 120 3250 830 6610 120 3000 830
8.25, 7.50
12.2
311 501 6175 110 2800 760 5675 110 2575 760
40
XZE
®
2 / XZE
®
2+
HIGHWAY & REGIONAL APPLICATIONS
1
All-position radial optimized for steer axles in regional and limited highway service
• Buttressed shoulder helps resist wear in high scrub applications
• Full depth sipes offer enhanced traction throughout the usable tire life
• Full-width protector ply helps protect the working plies from bruises and penetrations
• European design
2
Size
Load
Range
XZE2 (European design)
Catalog
Number
Tread
Depth
Max.
Speed
(*)
32nds mph
215/75R17.5 (4) G 19502 16
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
Approved
Wheels
(Measuring wheel listed first.)
75 14.1
357 30.5
774 8.5
217 6.00, 6.75
10.00R20 (2,3)
305/75R24.5
(1)
H
J
01889
67251
18
22
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
9.4
239 684 3750 100 1700 690 3525 100 1600 690
65 19.5
488 41.3
1049 11.1
281 7.5, 6.5, 7.0
12.5
318 503 6780 115 3075 790 6005 115 2725 790
65 19.8
504 42.7
1084 11.6
294 8.25 13.1
334 486 8270 120 3750 830 7160 120 3250 830
XZE2+
265/70R19.5
285/70R19.5
275/70R22.5
295/80R22.5
(2)
(2)
(2)
(2)
J
H
G
H
46194
68419
78395
81993
17
18
19
20
75
75
75
75
15.8
16.2
17.6
19.3
402
412
448
489
(1, 2) Tread design as indicated above the tire pictures.
(3) Please refer to the Tubes and Flaps Table on Page 86.
(4) Tread design not shown.
34.3
35.2
38.0
41.5
870
895
966
1055
10.4
11.1
10.9
11.7
263
283
276
298
7.50, 6.75, 8.25 11.6
7.50, 8.25, 9.00 12.2
7.50, 8.25
8.25, 9.00
11.9
12.8
295
311
303
326
607
592
545
500
5510
6395
6940
7830
110
120
130
120
2500
2900
3150
3550
760
830
900
830
5205
6005
6395
6940
110
120
120
120
2360
2725
2900
3150
760
830
830
830
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN
® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
XZA
®
HIGHWAY & REGIONAL APPLICATIONS
All-position radial with proven versatility
• Massive shoulders and application specific compound help resist scrub and abrasion, promoting extended tread life
• Zig-zag groove design for true all-position use
1 2
- 305/70R19.5
Size
10R17.5
(1)
8R19.5
(1)
305/70R19.5
(2)
Load
Range
G
F
Catalog
Number
05008
Tread
Depth
Max.
Speed
(*)
32nds mph
16
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
65 15.6
397 33.9
861 9.5
241
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
6.75, 7.50
11.1
282 615 4805 115 2180 790 4540 115 2060 790
60893 16 75 15.6
395 33.6
854 8.1
206 5.25, 6.00
8.8
224 616 3525 110 1600 760 3305 110 1500 760
J 50505 18 75 16.7
424 36.3
922 11.8
300 8.25, 9.00
13.1
334 575 6940 120 3150 830 6395 120 2900 830
(1, 2) Tread design as indicated above the tire picture.
X ONE
®
XZY
®
3
ON/OFF ROAD APPLICATIONS
MICHELIN
®
all-position radial innovation designed for significant weight and fuel savings
(1)
in on/off road operations
• Long tread life and outstanding chip and cut resistance in on/off road service with 23 ⁄ 32nds original tread depth of application specific compound
• Flat, stable contact area for long, even wear provided by Michelin’s
Infini-Coil Technology ™ , featuring a 1⁄ 4 mile of steel cable to help eliminate casing growth
• Enhanced protection against stone drilling from variable pitch groove walls and groove bottom protectors in center grooves
• Great bead durability and resistance to heat from reinforced bead package featuring a wide metallic chafer
Size
Load
Range
Catalog
Number
Tread
Depth
32nds
23
Max.
Speed (*) mph
75
Loaded Radius in.
19.4
mm
492
Overall Diameter in.
41.9
mm
1065
Overall Width (‡) in.
17.8
mm
452 455/55R22.5
M 11629
(1) Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
(2) For use on 13" wheel, see Page 93.
Approved
Wheel
Revs
Per Mile
14.00
(2) 496
lbs.
11700
Max. Load and Pressure
Single psi kg.
130 5300
kPa
900
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
41
XZY
®
3
ON/OFF ROAD APPLICATIONS
All-position radial designed for exceptional wear and traction in mixed on/off road service
• 24 ⁄ 32nd tread depth for long life (315/80R22.5 has 23 ⁄ 32nd’s)
• +11% increase in tread volume for increased mileage and improved durability, +5% in tread width, +4% in tread depth,
+2% in net contact area
(3)
• New tread compound formulation offers excellent protection against aggression, chipping and scaling
• Maximized soft soil and mud traction throughout the tire life as ribs and shoulder edges retain their aggressive notches
• Rounded bead toe for easy mount and demount as well as help in reducing bead damage
• Extra-robust four steel belt construction for excellent retreadability (315/80R22.5 has three steel belts)
1 2
- 315/80R22.5
Size
11R22.5
(1)
11R22.5
(1)
12R22.5
(1)
315/80R22.5
(2)
11R24.5
(1)
11R24.5
(1)
12R24.5
(1)
H
L
G
Load
Range
G
H
Catalog
Number
84455
Tread
Depth
Max.
Speed
(*)
32nds mph
24
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
65 19.6
498 41.8
1061 11.3
288
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
8.25, 7.50
12.5
318 496 6175 105 2800 720 5840 105 2650 720
80927 24 65 19.6
498 41.8
1061 11.3
288 8.25, 7.50
12.5
318 496 6610 120 3000 830 6005 120 2725 830
H
H
47947
79250
47951
24
40200 23
47945 24
24
24
65
65
65
65
65
20.1
19.8
20.5
20.5
21.0
509
502
520
520
533
42.9
42.9
43.7
43.7
44.9
1089
1088
1110
1111
1140
11.4
12.5
11.3
11.4
11.5
290
318
288
289
291
8.25, 9.00
9.00, 8.25
(4)
13.2
335 483 7390 120 3350 830 6780 120 3075 830
13.8
351 486 9090 130 4125 900 8270 130 3750 900
8.25, 7.50
12.5
318 473 6610 105 3000 720 6005 105 2725 720
8.25, 7.50
8.25, 9.00
12.5
13.2
318
335
473
461
7160
7830
120
120
3250
3550
830
830
6610
7160
120
120
3000
3250
830
830
(1, 2) Tread design as indicated above the tire picture.
(3) When compared to MICHELIN ® XZY-2 ™ tire.
(4) For use with 8.25 x 22.5 wheels, see Page 93.
XZY
®
3
WIDE BASE
ON/OFF ROAD APPLICATIONS
Exceptional all-position wide base radial designed for heavy front axle service in mixed service applications
• Improved traction in soft soil and mud promoted by aggressive new tread design
(1)
• Improved floatation offered by wider tread (almost 1 inch wider than
MICHELIN
®
XZY
®
Wide Base tire)
• Great resistance to shocks, bruising and penetrations fostered by new four-belt design featuring full-width elastic protector ply
• Added sidewall and shoulder protection from thicker rubber and new aggressive shoulder design
• Improved wet traction throughout the tread life cultivated by deep, wide circumferential grooves and minimized bridging between tread elements
Size
385/65R22.5
425/65R22.5
445/65R22.5
Load
Range
L
L
J
Catalog
Number
53779
40321
83691
Tread
Depth
32nds
22
23
23
Max.
Speed (*) mph
65
65
65
(1) When compared to the MICHELIN ® XZY ® Wide Base tire.
Loaded Radius in.
19.6
20.6
21.1
mm
499
524
536
Overall Diameter Overall Width (‡) in.
42.4
44.7
45.8
mm
1078
1137
1164
in.
14.9
16.6
17.8
mm
379
421
451
Approved Wheels
(Measuring wheel listed first.)
11.75, 12.25
13.00, 12.25
14.00, 13.00
Revs
Per
Mile
491
465
455
lbs.
Max. Load and Pressure
Single psi kg.
kPa
9370 120 4250 830
11400 120 5150 830
12800 130 5800 900
42
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN
® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
X ONE
®
XZU
®
S
URBAN APPLICATIONS
Michelin’s all-position radial innovation designed for significant weight and fuel savings
(1)
in urban regional operations
• Long tread life and outstanding scrub resistance in urban/regional service with 23 ⁄ 32nd original tread depth of application specific compound
• Flat, stable contact area for long, even wear provide by Michelin’s
Infini-Coil Technology
™
, featuring a 1⁄ 4 mile of steel cable to help eliminate casing growth
• Enhanced protection against stone drilling from variable pitch groove walls and groove bottom protectors in all grooves
• Great bead durability and resistance to heat from reinforced bead package featuring a wide metallic chafer
Size
455/55R22.5
Load
Range
M
Catalog
Number
28513
Tread
Depth
32nds
23
Max. Speed
(*) mph
75
Loaded Radius in.
19.4
mm
492
Overall Diameter in.
41.9
mm
1065
Overall Width (‡) in.
17.8
(1) Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
mm
452
Approved
Wheel
14.00
Revs
Per Mile
496
lbs.
Max. Load and Pressure
Single psi kg.
kPa
11700 130 5300 900
XZU
®
S2
URBAN APPLICATIONS
Next generation all-position tire with high carrying capacity designed for exceptional treadlife in high scrub urban applications such as waste vehicles
• Up to 20% increase in removal mileage
(1) due to new 4-rib tread design
• Improved retreadability
(1) due to a more robust tread design
• Increased resistance
(1) to high brake temperatures common in urban stop/start service due to updated bead design
Size
315/80R22.5
Load
Range
L
Catalog
Number
Tread
Depth
Max.
Speed
(*)
32nds mph
77510 23
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
65 19.7
501 42.8
1087 12.5
318
(1) When compared with MICHELIN ® XZU ® S tire.
Approved
Wheel
9.00
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
13.8
351 486 10000 130 4535 900 8270 130 3750 900
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
43
XZU
®
S
WIDE BASE
URBAN APPLICATIONS
All-position radial with high carrying capacity designed for exceptional tread life in high scrub urban applications, such as waste vehicles
• Significant increase in tread life with new scrub-resistant, applicationspecific tread compounds and increased tread volume
• 65 mph* rating with optimized scrub resistance and reduced operating temperatures in the crown area
• Fosters reduced mounting and dismounting damages with Michelin's rounded bead toe design
Size
425/65R22.5
Load
Range
L
Catalog
Number
03785
Tread
Depth
32nds
23
Max.
Speed (*) mph
65
Loaded Radius in.
20.6
mm
524
Overall Diameter Overall Width (‡) in.
44.7
mm
1137
in.
16.6
mm
421
Approved Wheels
(Measuring wheel listed first.)
13.00, 12.25
Revs
Per Mile
465
lbs.
Max. Load and Pressure
Single psi kg.
kPa
11400 120 5150 830
XZU
®
3
URBAN APPLICATIONS
All-wheel-position radial for urban operations involving frequent stopping and starting
(5)
• Significant increase in mileage with deeper, wider tread and application specific compounds
• Exceptional traction on wet and slippery surfaces through Matrix
™
Siping technology
(4)
• Outstanding resistance to high scrub applications from large solid shoulder
• Reduced damage from mount/dismount with Michelin's rounded bead toe design
(4)
1
- 11R22.5
2
- 305/85R22.5
• Extended retreadability with extra robust casing design and special elongated metallic chaffer in bead
• Extra thick sidewalls with depth indicators resist the curb scrub in urban service and allow for timely tire rotation ensuring maximum casing utilization
(4)
3
- 305/75R24.5
Size
11R22.5
(1)
305/85R22.5
(2)
305/75R24.5
(3)
Load
Range
H
Catalog
Number
Tread
Depth
Max.
Speed
(*)
32nds mph
32873 25
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
62 19.5
494 41.9
1065 10.8
275
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
7.50, 8.25
12.2
311 499 6940 120 3150 830 6395 120 2900 830
J
J 56332
60143
26
22
65
65
20.0
19.9
508
504
43.0
42.7
1093
1084
11.6
11.6
294
294
8.25, 9.00
8.25
13.2
13.1
335
334
482
486
7830
8270
120
120
3550
3750
830
830
7160
7160
120
120
3250
3250
(1, 2, 3) Tread design as indicated above the tire picture.
(4) Does not apply to 305/75R24.5.
(5) “No bus shall be operated with regrooved, recapped or retreaded tires on the front wheels.” US Code of Federal Regulations: Title 49, Transportation; Part 393.75.
830
830
44
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in rim width. Minimum dual spacing should be adjusted accordingly.
MICHELIN
® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult rim manufacturer’s load and inflation limits. Never exceed rim manufacturer’s limits without permission of component manufacturer.
XZU
®
2
URBAN APPLICATIONS
All-wheel-position radial optimized for urban operations involving frequent stopping and starting, e.g., transit buses, delivery vehicles and sanitation trucks
• Built-up sidewall protectors provide protection against most curb damage
• Sidewall wear indicators promote timely tire rotation for long casing life and enhanced retreadability
• Thick undertread with regrooving depth indicators allows efficient regrooving for extended original tread life (1)
• Wide, deep circumferential grooves and full-depth sipes help promote excellent traction throughout the life of the tire
Size
12R22.5
275/70R22.5
305/70R22.5
Load
Range
J
Catalog
Number
Tread
Depth
Max.
Speed
(*)
32nds mph
43714 24
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
62 19.9
506 42.9
1089 11.4
289
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
8.25, 9.00
13.2
335 485 7830 120 3550 830 6940 120 3150 830
L
J 57317
95623
21
22
62
65
17.6
18.3
448
465
38.0
39.4
966
1001
11.3
11.9
288
303
7.50, 8.25
8.25, 9.00
11.9
13.5
303
343
545
526
6940
7830
130
120
3150
3550
900
830
6395
6940
120
120
2900
3150
(1) “No bus shall be operated with regrooved, recapped or retreaded tires on the front wheels.” US Code of Federal Regulations: Title 49, Transportation; Part 393.75.
See Page 99 for regrooving instructions.
830
830
X COACH XZ
LONG HAUL APPLICATIONS
The new, all-position, long haul charter bus tire designed for mileage, safety and comfort
(1)
• New tread design helps deliver up to 15% higher mileage by 2 ⁄ 32nds deeper tread depth and a 0.4" wider tread, while maintaining superior performance (2)
• Central zig-zag tread grooves help deliver improved grip for a shorter braking distance on wet or icy roads (2)
• Lined profile and closed shoulder help deliver a quieter ride
(2)
Size
Load
Range
J
Catalog
Number
Tread
Depth
Max.
Speed
(*)
32nds mph
28798 19
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
75 19.2
488 41.3
1050 12.0
306 9.00, 8.25
13.3
338 500 7830 123 3550 850 6940 123 3150 850 295/80R22.5
(1) “No bus shall be operated with regrooved, recapped or retreaded tires on the front wheels.” US Code of Federal Regulations: Title 49, Transportation; Part 393.75.
(2) When compared to the MICHELIN ® XZA2 ® Energy tire.
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
45
XFE
WIDE BASE STEER
HIGHWAY & REGIONAL APPLICATIONS
The wide-base radial designed to deliver high mileage and a quiet ride on heavy front axle in regional and highway applications
• Dual-compound tread rubber helps ensure cool operating temperatures, while abrasion-resistant rubber compound helps keep tire wear rate low
• Deep, wide channels help provide excellent water evacuation throughout the life of the tire
• Lateral siping along rib edges help enhance traction and braking in adverse weather conditions
• Robust crown design with four-steel belt package
Size
385/65R22.5
425/65R22.5
445/65R22.5
Load
Range
L
L
M
Catalog
Number
36991
11829
10805
Tread
Depth
32nds
21
21
Max.
Speed (*) mph
65
65
21 65
Loaded Radius in.
19.6
20.6
21.0
mm
499
522
534
Overall Diameter Overall Width (‡) in.
42.2
44.5
45.6
mm
1072
1130
1158
in.
14.9
16.6
17.8
mm
379
421
451
Approved Wheels
(Measuring wheel listed first.)
Revs
Per Mile
11.75, 12.25
13.00, 12.25
14.00, 13.00
492
468
457
lbs.
Max. Load and Pressure
Single psi kg.
kPa
9920 130 4500 900
11400 120 5150 825
12800 130 5800 900
46
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN
® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
X ONE
®
XDA
®
ENERGY
HIGHWAY APPLICATIONS
Directional tread
The most fuel efficient
(1)
drive tire available for North
American long haul trucks
• Engineered to replace duals
• Innovative belt design and Advanced Technology ™ compounds deliver industry leading fuel-efficiency
(1) and long tread life
• Features Infini-Coil Technology ™ , incorporating a 1⁄ 4 mile of steel cable to help eliminate casing growth
• Matrix ™ Siping technology helps provide exceptional traction on dry and slippery surfaces. The 3D Matrix
™ sipes lock together for the stability normally associated with solid tread blocks.
• Directional tread design
Size
445/50R22.5
455/55R22.5
(2)
(2)
Load
Range
L
L
Catalog
Number
21881
57105
Tread
Depth
32nds
24
24
Max.
Speed (*) mph
75
75
Loaded Radius in.
18.5
19.3
mm
471
490
Overall Diameter in.
40.1
41.8
mm
1019
1062
Overall Width (‡) in.
17.2
17.6
(1) Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
(2) Directional tread design.
mm
436
448
Approved
Wheel
Revs
Per Mile
14.00
14.00
518
498
lbs.
10200
Max. Load and Pressure
Single psi kg.
120 4625
11000 120 5000
kPa
830
830
X ONE
®
XDN
®
2
HIGHWAY & REGIONAL APPLICATIONS
Michelin's longest-wearing, best traction X One
®
drive tire for highway and regional operations
• Engineered to replace duals
• Weight savings of approximately 371 lb. per tractor, when compared to the MICHELIN ® XDN ® 2 tire
• Multiple tread compounds to keep the casing cooler and optimize retreadability
• Infini-Coil Technology ™ incorporates 1⁄ 4 mile of steel cable to stabilize the footprint and minimize casing growth
• Extra wide tread width for excellent stability and long wearlife
• Open shoulder design helps provide exceptional traction on dry, wet and snow covered surfaces
Size
445/50R22.5
455/55R22.5
Load
Range
Catalog
Number
L
L
36587
31535
Tread
Depth
32nds
27
27
Max.
Speed (*) mph
75
75
Loaded Radius in.
18.7
19.5
mm
474
495
Overall Diameter in.
40.4
42.3
mm
1026
1076
Overall Width (‡) in.
17.1
17.6
mm
435
446
Approved
Wheel
Revs
Per Mile
14.00
14.00
515
492
lbs.
10200
Max. Load and Pressure
Single psi kg.
120 4625
11000 120 5000
kPa
830
830
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
47
XDA
®
5
HIGHWAY & REGIONAL APPLICATIONS
Our longest wearing long haul drive tire featuring regenerating tread features that deliver excellent traction late in life
• Extra wide tread width for excellent stability and long wearlife
• Regenerating tread features from MICHELIN ® Durable Technologies for excellent traction throughout the life of the tire
• MICHELIN ®
Matrix
™ Siping technology helps provide exceptional traction on dry and slippery surfaces. The 3D Matrix
™ sipes lock together for the stability normally associated with solid tread blocks
• Full 30 ⁄ 32nds tread depth helps provide unmatched original treadlife
• Strong, solid shoulders give excellent stability and handling
Size
11R22.5
275/80R22.5
11R24.5
11R24.5
275/80R24.5
305/75R24.5
G
H
G
J
Load
Range
G
G
Catalog
Number
73154
Tread
Depth
Max.
Speed
(*)
32nds mph
30
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
75 19.5
495 41.7
1058 11.3
287
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
8.25, 7.50
12.5
318 497 6175 105 2800 720 5840 105 2650 720
76747 30 75 19.0
483 40.6
1031 11.1
281 8.25, 7.50
12.2
311 510 6175 110 2800 760 5675 110 2575 760
73177
03713 30
73166 30
30987
30
30
75
75
20.5
20.1
521
510
43.8
43.3
1112
1100
11.2
11.5
284
75 20.6
523 43.8
1113 11.3
286
75 19.7
499 41.8
1062 10.8
273
293
8.25, 7.50
12.5
318 472 6610 105 3000 720 6005 105 2725 720
8.25, 7.50
12.5
318 471 7160 120 3250 830 6610 120 3000 830
8.25, 7.50
12.2
311 494 6175 110 2800 760 5675 110 2575 760
8.25, 9.00
13.5
343 480 8270 120 3750 830 7160 120 3250 830
XDA3
®
/ XD2
®
HIGHWAY APPLICATIONS
Fuel-efficient
(3)
, standard drive tire that helps deliver long, even tread wear and a smooth quiet ride
• Our newest compound formulation combines low rolling resistance (3) with long original treadlife
• Alternating groove wall angles help resist stone retention and improve traction throughout the life of the tire
• Wide circumferential grooves quickly evacuate water
• 7 Year / 700,000 Mile / 3-Retread Manufacturer’s Limited
Casing Warranty (4)
1
- 255/70R22.5 XD2
2
48
7 YEAR 700,000-MILE
3-RETREAD LIMITED WARRANTY (4)
Size
11R22.5
(2)
255/70R22.5
(1)
275/80R22.5
(2)
11R24.5
(2)
275/80R24.5
(2)
H
G
G
G
Load
Range
G
Catalog
Number
96666
Tread
Depth
Max.
Speed
(*)
32nds mph
26
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
75 19.5
496 41.9
1063 11.1
283 8.25, 7.50
12.5
318 495 6175 105 2800 720 5840 105 2650 720
74493
68934
25
73095 26
71551 26
26
75 17.4
442 37.2
944 10.2
258 8.25, 7.50
11.6
295 558 5510 120 2500 830 5070 120 2300 830
75 18.8
478 40.5
1028 10.9
278 8.25, 7.50
12.2
311 513 6175 110 2800 760 5675 110 2575 760
75 20.5
521 43.8
1113 11.1
283 8.25, 7.50
12.5
318 473 6610 105 3000 720 6005 105 2725 720
75 19.5
496 41.9
1063 10.7
271 8.25, 7.50
12.2
311 495 6175 110 2800 760 5675 110 2575 760
(1, 2) Tread design as indicated above the tire picture.
(1) MICHELIN ® XD2 ® tread design.
(3) Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
(4) 7/7/3 Manufacturer's Limited Casing Warranty: 700,000 miles, 7 years, or 3 retreads for MICHELIN ®
See limited warranty for details.
XZA3 ® , XZA3 ® Antisplash ™ , XDA3 ® , and XDA ® Energy tires only.
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN
® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
XDA
®
ENERGY
HIGHWAY APPLICATIONS
Ground-breaking, fuel-efficient
(1)
, ultra-low profile drive axle radial truck tire especially designed for long even wear, good traction, and a quiet ride for long-haul 6x4s
• Latest Advanced Technology
™ tread compounds for outstanding fuel efficiency
(1)
• Alternating groove wall angles help resist stone retention and improve traction throughout the life of the tire
• Wide circumferential grooves quickly evacuate water
• 7 Year / 700,000 Mile / 3-Retread Manufacturer’s Limited Casing Warranty (2)
7 YEAR 700,000-MILE
3-RETREAD LIMITED WARRANTY
(2)
Size
Load
Range
G
Catalog
Number
42564
Tread
Depth
Max.
Speed
(*)
32nds mph
26
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
75 18.9
481 40.5
1028 10.9
278
Approved
Wheels
(Measuring wheel listed first.)
8.25, 7.50
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
12.2
311 511 6175 110 2800 760 5675 110 2575 760 275/80R22.5
(1) Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
(2) 7/7/3 Manufacturer's Limited Casing Warranty: 700,000 miles, 7 years, or 3 retreads for MICHELIN ®
See limited warranty for details.
XZA3 ® , XZA3 ® Antisplash ™ , XDA3 ® , and XDA ® Energy tires only.
XDN
®
2 / XDN
®
2 GRIP
HIGHWAY & REGIONAL APPLICATIONS
1 2 -
Directional tread, 315/80R22.5
All weather premium drive tire optimized for exceptional traction and mileage
• Matrix ™ Siping technology helps provide exceptional traction on dry and slippery surfaces. Over 1,300 biting edges combine to help provide excellent levels of traction while the
3 dimensional Matrix ™ sipes lock together for the stability normally associated with solid tread blocks
• Extra wide tread helps provide stability while helping to improve handling and mileage
• Full 27 ⁄ 32nds tread depth helps provide long original tread life
(MICHELIN ® XDN ® 2 Grip tire has 28 ⁄ 32nds original tread depth)
• Wide, open shoulder grooves help deliver additional traction balanced with tread life
Size
11R22.5
(1)
11R22.5
(1)
12R22.5
(1)
275/80R22.5
(1)
315/80R22.5
(2)
11R24.5
(1)
11R24.5
(1)
275/80R24.5
(1)
Load
Range
G
H
H
G
L
G
H
G
Catalog
Number
72805
Tread
Depth
Max.
Speed
(*)
32nds mph
27
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
75 19.5
495 41.7
1060 11.2
284
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
8.25, 7.50
12.5
318 496 6175 105 2800 720 5840 105 2650 720
64321 27
51753 27
63465 27
04355 28
87459 27
87129 27
75684 27
75 19.5
495 41.7
1060 11.2
284
75
75
75
20.0
18.9
20.0
(1) MICHELIN ®
(2) MICHELIN ®
XDN
XDN
®
®
2 tread design (non-directional).
2 Grip tread design (directional).
(3) For use with 8.25 x 22.5 wheels, see Page 93.
508
481
507
42.9
40.6
43.1
1089
1030
1094
11.3
11.0
12.5
287
279
317
75 20.4
519 43.7
1111 11.2
284
75 20.5
522 43.8
1112 11.2
284
75 19.6
497 41.8
1061 10.6
270
8.25, 7.50
12.5
318 496 6610 120 3000 830 6005 120 2725 830
8.25, 9.00
9.00, 8.25
(3)
13.2
335 483 7390 120 3350 830 6780 120 3075 830
8.25, 7.50
12.2
311 511 6175 110 2800 760 5675 110 2575 760
13.8
351 486 9090 130 4125 900 8270 130 3750 900
8.25, 7.50
12.5
318 473 6610 105 3000 720 6005 105 2725 720
8.25, 7.50
12.5
318 473 7160 120 3250 830 6610 120 3000 830
8.25, 7.50
12.2
311 495 6175 110 2800 760 5675 110 2575 760
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
49
X MultiWay XD
HIGHWAY & REGIONAL APPLICATIONS
The versatile, all-season drive tire for all types of roads
• Excellent durability due to a new damage-resistant rubber and a new directional tread pattern that reduces stone retention
• Up to 19% more grip on wet and slippery roads and improved braking distance after 2/3 worn (1) , due to double wave and raindrop sipe technologies
• Up to 30% increased mileage (1) from a deeper, wider tread with
MICHELIN ® Durable Technologies
Directional tread
Size
Load
Range
J
Catalog
Number
Tread
Depth
Max.
Speed
(*)
32nds mph
06376 23 68
Loaded
Radius in.
16.9
mm
430
Overall
Diameter in.
36.5
mm
927
Overall Width
(‡) in.
11.4
mm
289
Approved
Wheels
(Measuring wheel listed first.)
9.00, 9.75
(2)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
13.0
330 569 7390 130 3350 900 6780 130 3075 900 295/60R22.5
(1) When compared to the MICHELIN
®
XDE
®
2+ tire.
(2) For further instructions on proper usage of the 295/60R22.5, see Page 95.
XDE
®
M/S
REGIONAL APPLICATIONS
Open shoulder drive axle radial engineered for excellent mileage and traction across a wide range of applications
• Aggressive open shoulder design with deep tapered lateral grooves help provide outstanding year round traction and excellent water and mud dispersion
• Application specific compounds help resist the effects of scrubbing in standard LRG sizes. LRH sizes with a designation feature for chip and cut resistant compound.
• Full depth sipes help provide additional traction on wet and slippery surfaces in LRG sizes
• Offset shoulder blocks for excellent traction in mud and soft soil conditions
Size
10R22.5
11R22.5
11R22.5
275/80R22.5
11R24.5
11R24.5
Load
Range
G
G
Catalog
Number
87357
73493
Tread
Depth
Max.
Speed
(*)
32nds mph
23
26
75
Loaded
Radius in.
mm
18.8
477
Overall
Diameter in.
mm
40.2
1022
Overall Width
(‡) in.
mm
10.2
259
Approved
Wheels
(Measuring wheel listed first.)
6.75,
7.50, 8.25
Min. Dual
Spacing (‡) in mm
11.1
282
Revs
Per
Mile
515
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
5675 115 2575 790 5355 115 2430 790
75 19.4
492 41.6
1057 11.2
285 8.25, 7.50
12.5
318 498 6175 105 2800 720 5840 105 2650 720
H
G
G
H
73927
46695
28
61426 26
51273 26
28
75
With chip and cut resistant tread compound.
19.4
493 41.7
1060 11.2
285 8.25, 7.50
12.5
318 497 6610 120 3000 830 6005 120 2725 830
75 18.7
476 40.5
1028 11.1
282 8.25, 7.50
12.2
311 513 6175 110 2800 760 5675 110 2575 760
75 20.4
518 43.8
1112 11.1
281 8.25, 7.50
12.5
318 475 6610 105 3000 720 6005 105 2725 720
75 20.4
519 43.9
1115 11.1
281 8.25, 7.50
12.5
318 474 7160 120 3250 830 6610 120 3000 830
50
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN
® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
XDE
®
2+
REGIONAL APPLICATIONS
Open shoulder drive axle radial designed for regional/highway service (directional tread)
• Tread block design featuring five longitudinal sipes for optimized grip and traction
• New damage resistant rubber compound for improved removal mileage
• Tread designed to minimize irregular wear
• Directional tread pattern to minimize stone retention
Directional tread
Size
265/70R19.5
285/70R19.5
11R22.5
(1)
275/80R22.5
(1)
(1)
(1)
Load
Range
G
H
Catalog
Number
95319
Tread
Depth
Max.
Speed
(*)
32nds mph
20
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
75 15.9
404 34.4
875 10.3
262 7.50, 6.75, 8.25
11.6
295 605 5510 110 2500 760 5205 110 2360 760
79456 21 75 16.3
414 35.4
899 10.8
274 7.50, 8.25, 9.00
12.2
311 587 6395 120 2900 830 6005 120 2725 830
H
H
37332
36993
25
28
75
75
19.4
19.0
492
482
41.8 1061 10.5
40.8 1036 11.0
266
280
7.50, 8.25
7.50, 8.25
11.9
12.5
301
317
497
509
6940
7160
120
120
3150
3250
830
830
6395
6610
120
120
2900
3000
830
830
(1) Directional tread design.
X Works XDY
®
ON/OFF ROAD APPLICATIONS
Next generation on/off road drive tire optimized for exceptional traction and wear in mixed and severe on/off road service
• Improved durability (1) due to a more robust center region of the tread
• 10% improved removal mileage
(1) due to the wider tread width
• More efficient mud evacuation (1) due to directional tread
• Excellent protection from shocks, snags and impacts due to extra-thick sidewall
Directional tread
Size
11R22.5
11R24.5
Load
Range
H
Catalog
Number
Tread
Depth
Max.
Speed
(*)
32nds mph
89725 30
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
65 19.7
499 41.9
1065 11.3
287 8.25, 7.50
12.5
318 493 6610 120 3000 830 6005 120 2725 830
H 90022 30 65 20.7
(1) When compared to the MICHELIN ® XDY ® 3 tire.
525 44.0
1118 11.3
288 8.25, 7.50
12.5
318 469 7160 120 3250 830 6610 120 3000 830
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
51
XDY
®
3
ON/OFF ROAD APPLICATIONS
On/off road drive tire optimized for exceptional traction and wear in mixed and severe on/off road service
• Long original tread life offered from 31 ⁄ 32nds tread depth
• 12% increase in tread volume for increased mileage and durability, + 5% tread width
(3)
, + 3% tread depth
(3)
• Maximized traction in soft soil and mud through massive, open lateral shoulder grooves
• Extra robust four-belt crown package with extra wide working plies helps deliver exceptional casing life
(4)
1 2 -
Directional tread, 315/80R22.5
Size
11R22.5
(1)
315/80R22.5
(2, 4)
Load
Range
H
L
Catalog
Number
97079
Tread
Depth
Max.
Speed
(*)
32nds mph
31
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
65 19.8
503 42.2
1072 11.3
287 8.25, 7.50
12.5
318 490 6610 120 3000 830 6005 120 2725 830
40302 31 65 20.0
508 43.3
1099 12.5
318 9.00, 8.25
(4)
13.8
351 480 9090 130 4125 900 8270 130 3750 900
11R24.5
12R24.5
(1)
(1)
H
H
47962
47966
31
31
65
65
20.8
21.3
528
542
44.4
45.6
1127
1157
11.3
11.3
287
287
8.25, 7.50
8.25, 9.00
12.5
13.2
318
335
467
454
7160
7830
120
120
3250
3550
830
830
6610
7160
120
120
3000
3250
830
830
(1, 2) Tread design as indicated above the tire picture.
(3) When compared to the MICHELIN ® XDY-2 ™ tire.
(4) The 315/80R22.5 has a directional tread design with three belt construction. For use with 8.25 x 22.5 wheels, see Page 93.
XDY-2
™
ON/OFF ROAD APPLICATIONS
Aggressive radial truck tire designed for on/off service in severe conditions
• Rugged directional tread with application specific compounds helps provide outstanding self-cleaning capability combined with resistance to aggressions
• Deep lateral shoulder grooves aid water and mud dispersion to help enhance traction
• Extra robust four-belt crown package with extra wide working plies help deliver exceptional casing life
• Extra thick sidewalls, designed to increase protection from shocks, snags and impacts
• Full-width elastic protector ply and extra thick rubber under the tread help protect the working plies from shocks, bruises and impacts
Directional tread
Size
11R22.5
(1)
11R24.5
(1)
Load
Range
H
H
Catalog
Number
77416
Tread
Depth
Max.
Speed
(*)
32nds mph
30
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
65 19.7
500 42.1
1069 11.0
279 8.25, 7.50
12.5
318 493 6610 120 3000 830 6005 120 2725 830
76789 30
(1) Directional tread design.
65 20.6
524 44.1
1120 11.0
279 8.25, 7.50
12.5
318 469 7160 120 3250 830 6610 120 3000 830
52
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN
® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
XDY-EX2
™
ON/OFF ROAD APPLICATIONS
Our most aggressive drive axle tire designed for commercial vehicles operating in extreme conditions where maximum traction is the priority
• Improved off-road and mud traction due to a more aggressive tread redesign with more void area
(2)
• Excellent crown durability and retreadability due to significantly reduced stone retention
• Excellent protection from shocks, snags and impacts due to extra-thick sidewall
(3)
Size
Load
Range
H
Catalog
Number
23274
Tread
Depth
Max.
Speed
(*)
32nds mph
32
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
65 20.7
527 44.3
1125 11.3
287 8.25, 7.50
12.5
318 467 7160 120 3250 830 6610 120 3000 830 11R24.5
(1)
(1) Coming 3rd Quarter 2011, preliminary specs.
(2) When compared to the MICHELIN ®
(3) Preliminary photograph.
XDY-EX ™ .
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
53
XDS
®
/XDS
®
2
(Standard Sizes) REGIONAL & ON/OFF ROAD APPLICATIONS
Directional tread
Drive axle radial for year-round traction and optimized for severe winter conditions
• Rugged, directional tread design helps boost snow and ice traction and helps reduce heel/toe wear typically associated with open shoulder designs
• MICHELIN ® Durable Technology 3D Matrix ™ Siping helps provide exceptional traction on dry and slippery surfaces
(1)
• Over 450 full-depth, zig-zag sipes interlock to enhance block stability under torque while providing extra bite, especially in deep snow
• Extra-robust, four-belt crown package with extra-wide working plies help deliver exceptional casing life
• Full-width, elastic protector ply and extra-thick rubber under the tread help protect the working plies from shocks, bruises and impacts
• Application-specific compound designed to provide maximum snow traction
Size
Load
Range
Catalog
Number
Tread
Depth
Max.
Speed
(*)
32nds mph
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
XDS ® 2
11R22.5
(1,2)
11R24.5
(1,2)
XDS ®
12R22.5
(3)
H
H
05359
06613
26
26
65
65
19.5
20.5
496
521
41.8
43.9
1062
1114
11.0
11.0
279
279
H 62208 26 65 19.9
506 42.8
1087 11.8
300
(1) Only MICHELIN ® XDS ® 2 standard sizes carry the MICHELIN ® Durable Technology logo.
(2) Directional tread design.
(3) Tread design is slightly different from the picture.
8.25, 7.50
8.25, 7.50
8.25, 9.00
12.5
12.5
13.2
318
318
335
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
496
472
484
6610
7160
7390
120
120
120
3000
3250
3350
830
830
830
6005
6610
6780
120
120
120
2725
3000
3075
830
830
830
XDS
®
2
(19.5" Wheel) REGIONAL & ON/OFF ROAD APPLICATIONS
The drive axle radial for year-round traction, optimized for winter conditions and limited all-position service
• Outstanding traction on wet and slippery surfaces from over 700 3D Matrix ™ sipes
• Optimized for stone rejection with variable angled groove walls and groove bottom protectors
• Traction in demanding surface conditions from open shoulder design
• Protection from impacts through robust curb guard features and sidewall scallops
• Self-cleaning tread pattern through zig-zag groove angles and wide, open shoulder grooves
Size
225/70R19.5
225/70R19.5
245/70R19.5
Load
Range
F
G
Catalog
Number
91423
Tread
Depth
Max.
Speed
(*)
32nds mph
18
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
75 15.2
386 32.4
824 9.2
234 6.75, 6.00
10.0
254 638 3640 95 1650 660 3415 95 1550 660
00691 18 75 15.2
386 32.4
824 9.2
234 6.75, 6.00
10.0
254 637 3970 110 1800 760 3750 110 1700 760
H 05797 19 75 15.6
395 33.6
854 9.7
247 6.75, 7.50
10.7
272 615 4940 120 2240 830 4675 120 2120 830
54
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN
® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
X ONE
®
XTA
®
HIGHWAY APPLICATIONS
The MICHELIN
®
trailer axle innovation that helps deliver exceptional fuel efficiency
(1)
and significant weight savings in long haul operations
• Engineered to replace duals on long haul trailer axle fitments
• Advanced Technology ™ compounds offer remarkable fuel savings (1) balanced with wet traction, mileage and even wear
• Four unique decoupling ribs help provide excellent resistance to irregular wear
• Features Infini-Coil Technology ™ , incorporating 1⁄ 4 mile of steel cable to help eliminate casing growth and ensure a consistent footprint
Size
Load
Range
Catalog
Number
Tread
Depth
32nds
13
Max.
Speed (*) mph
75
Loaded Radius in.
18.2
mm
463
Overall Diameter in.
39.5
mm
1003
Overall Width (‡) in.
17.1
mm
435 445/50R22.5
(2) L 49694
(1) Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
(2) Equivalent overall diameter to Michelin 275/80R22.5 trailer tire offering.
Approved
Wheel
Revs
Per Mile
14.00
527
lbs.
10200
Max. Load and Pressure
Single psi kg.
120 4625
kPa
830
X ONE
®
XTE
®
HIGHWAY & REGIONAL APPLICATIONS
The MICHELIN
®
trailer axle innovation that helps deliver exceptional weight savings and significant fuel efficiency
(1)
in highway and regional operations
• Engineered to replace duals on highway and regional trailer axle fitments
• Michelin's best scrub resistant (chip and cut resistant in designated version) compounds offer remarkable resistance to scrub balanced with wet traction or mileage
• Unique nine rib design helps deliver stability and excellent resistance to uneven wear
• Features Infini-Coil Technology ™ , incorporating 1⁄ 4 mile of steel cable to help eliminate casing growth and ensure a consistent footprint
Size
445/50R22.5
(2)
455/55R22.5 (3)
Load
Range
Catalog
Number
L
L
59070
30574
Tread
Depth
32nds
16
16
Max.
Speed (*) mph
75
75
Loaded Radius in.
18.3
19.2
mm
464
488
Overall Diameter in.
39.7
41.7
mm
1008
1059
Overall Width (‡) in.
17.1
17.6
mm
435
448
With chip and cut resistant tread compound.
(1) Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
(2) Equivalent overall diameter to Michelin 275/80R22.5 trailer tire offering.
(3) Equivalent overall diameter to Michelin 11R22.5 or 275/80R24.5 trailer tire offering.
Approved
Wheel
Revs
Per Mile
14.00
14.00
525
499
lbs.
10200
Max. Load and Pressure
Single psi kg.
120 4625
11000 120 5000
kPa
830
830
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
55
XT-1
®
HIGHWAY APPLICATIONS
Fuel-efficient
(1)
, standard trailer tire that helps deliver long, even tread wear in long haul service
• Standardized casing dimensions help ensure interchangeability with MICHELIN ® long haul steer and drive casings for efficient casing management
• Curb guard ribs help provide added defense against injuries from curbing
• Unique shoulder groove design helps provide excellent resistance to uneven shoulder wear
• Four see-through circumferential grooves aid water evacuation for good wet weather performance
Size
11R22.5
275/80R22.5
11R24.5
275/80R24.5
Load
Range
G
G
G
G
Catalog
Number
02078
Tread
Depth
Max.
Speed
(*)
32nds mph
12
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
75 19.1
485 40.8
1036 11.2
285 8.25, 7.50
12.5
318 501 6175 105 2800 720 5840 105 2650 720
19518 12
22754
29684
12
12
75 18.4
467 39.7
1008 11.1
281 8.25, 7.50
12.2
311 524 6175 110 2800 760 5675 110 2575 760
75
75
20.0
19.1
508
485
43.0
40.8
1092
1036
11.1
10.8
283
274
8.25, 7.50
8.25, 7.50
(1) Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
12.5
12.2
318
311
483
507
6610
6175
105
110
3000
2800
720
760
6005
5675
105
110
2725
2575
720
760
XTA
®
HIGHWAY & REGIONAL APPLICATIONS
The highway trailer radial optimized for low bed, high cube trailers operations
• Application specific compound
• Significant groove angles to help resist stone retention drilling
Size
10.00R15
(1)
215/75R17.5
Load
Range
J
Catalog
Number
Tread
Depth
Max.
Speed
(*)
32nds mph
70667 14
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
55 16.5
419 36.0
914 10.6
269 7.50, 7.00
12.5
318 579 6940 120 3150 830 6395 120 2900 830
J 82636 15 62 14.1
(1) Please refer to the Tubes and Flaps Table on Page 86.
359 30.7
779 8.7
221 6.00, 6.75
9.4
239 679 4805 120 2180 830 4540 120 2060 830
56
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN
® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
XTA
®
ENERGY
HIGHWAY APPLICATIONS
Most fuel-efficient
(1)
and quiet, standard trailer tire for long haul service
• Latest Advanced Technology ™ tread compounds for outstanding fuel efficiency (1)
• 13 ⁄ 32nds tread depth to help resist irregular wear
• Four see-through circumferential grooves aid water evacuation for excellent wet weather performance
Size
275/80R22.5
Load
Range
G
Catalog
Number
73176
Tread
Depth
Max.
Speed
(*)
32nds mph
13
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
75 18.4
467 39.6
1007 11.0
280 8.25, 7.50
12.2
311 524 6175 110 2800 760 5675 110 2575 760
(1) Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
XTA
®
2 ENERGY
HIGHWAY APPLICATIONS
Fuel-efficient
(4)
, small diameter trailer tire that helps deliver long, even tread wear in high cube highway service
• Advanced Technology ™ compounds formulated to help provide low rolling resistance (4) and cool operating temperatures
• See-through circumferential grooves promote efficient water evacuation for good wet braking and traction throughout the life
• Improved retreadability from a stronger, more curable crown package (compared to the MICHELIN ® Energy XTA ® tire)
• The 445/45R19.5 is an ultra low-profile, wide base tire optimized to replace duals
1 2
- 265/70R19.5
Size
245/70R17.5
(1)
265/70R19.5
(2)
445/45R19.5
(3)
Load
Range
J
J
M
Catalog
Number
78370 13
83728
69910
Tread
Depth
Max.
Speed
(*)
32nds mph
15
18
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
62 14.2
361 31.2
792 9.5
241
Approved
Wheels
(Measuring wheel listed first.)
6.75, 7.50
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
10.6
270 670 6005 125 2725 860 5675 125 2575 860
62 15.7
400 34.1
865 10.4
265 7.50, 6.75, 8.25 11.6
295 612 6005 120 2725 830 5675 120 2575 830
62 16.3
414 35.7
906 17.1
434 14.00
— — 585 9920 130 4500 900 — — — —
(1, 2) Tread design as indicated above the tire pictures.
(3) Tread design not shown.
(4) Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
57
XTE
®
HIGHWAY & REGIONAL APPLICATIONS
The robust highway trailer radial designed to withstand the demands of high scrub and spread axle service
• Long tread life from 16 ⁄ 32nds of application specific compounds
• Smooth, even wear in high-scrub service from beefy, solid shoulders and trailer optimized design
• Protection from impacts and curbing promoted by sidewall scallops and curb guard features
• Standardized casing dimensions help ensure interchangeability with MICHELIN ® long haul steer and drive casings for efficient casing management
Size
11R22.5
275/80R22.5
11R24.5
275/80R24.5
Load
Range
G
G
Catalog
Number
21307
Tread
Depth
Max.
Speed
(*)
32nds mph
16
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
75 19.1
484 41.0
1041 11.3
288 8.25, 7.50
12.5
318 506 6175 105 2800 720 5840 105 2650 720
17706 16 75 18.6
472 39.8
1012 11.0
280 8.25, 7.50
12.2
311 520 6175 110 2800 760 5675 110 2575 760
G
G
07025
33965
16
16
75
75
20.0
19.2
509
488
43.0
41.1
1093
1043
11.3
10.7
286
272
8.25, 7.50
8.25, 7.50
12.5
12.2
318
311
482
504
6610
6175
105
110
3000
2800
720
760
6005
5675
105
110
2725
2575
720
760
XTE2
®
HIGHWAY & REGIONAL APPLICATIONS
Robust small diameter trailer tire designed to withstand the demands of high scrub and spread axle service on low platform and specialty trailers
• Dual compound rubber helps ensure cool operating temperatures while upper tread abrasion resistance helps keep wear rates low
• Deep, wide channels help provide excellent water evacuation throughout the life of the tire
• Lateral siping along rib edges help enhance traction and braking in adverse weather conditions
• Robust crown design with 5 steel belt package
Size
235/75R17.5
285/70R19.5
Load
Range
J
Catalog
Number
01963
Tread
Depth
Max.
Speed
(*)
32nds mph
15
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
62 14.3
363 31.3
796 9.5
241 6.75, 7.50
10.3
262 668 6005 125 2725 860 5675 125 2575 860
J 37840 18 62 16.1
409 35.2
894 11.2
285 8.25, 9.00
12.7
323 594 7390 130 3350 900 6940 130 3150 900
58
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN
® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
XTY
®
2
ON/OFF ROAD APPLICATIONS
Low profile radial designed for rugged, mixed trailer service
• Compound for chip and cut resistance to help resist the abusive conditions of on/off road applications
• Four steel belt construction helps deliver extra casing protection and added stability
• Extra wide protector ply extends under all major grooves and helps protect the working plies from most bruising and penetrations
Size
275/70R22.5
Load
Range
J
Catalog
Number
42407
Tread
Depth
Max.
Speed
(*)
32nds mph
21
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
62 17.7
450 38.2
970 10.9
276
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
7.50, 8.25
11.9
303 544 6940 120 3150 830 6395 120 2900 830
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
59
XZA
®
4
REGIONAL APPLICATIONS
High capacity tube type all-position tire designed for heavy axle applications such as mobile cranes
• Five deep circumferential grooves for excellent water evacuation and wet traction
• Full-width working plies help provide a flat footprint for exceptional stability
• Extra high load carrying capacity for the tough requirements of special applications
• Maximum speed 50 mph*
Size
G20 (14.00R20) (1)
Load
Range
M
Catalog
Number
70870
Tread
Depth
Max.
Speed
(*)
32nds mph
18
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
50 22.4
568 48.8
1239 15.0
380
(1) Please refer to the Tubes and Flaps Table on Page 86.
Approved
Wheel
10.00
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
16.8
426 428 11000 115 5000 790 10200 115 4625 790
XZY
®
ON/OFF ROAD APPLICATIONS
All-position radial for on/off road service
• Offset block shoulder design promotes soft soil mobility
• Application specific compound to help resist aggressions from chipping and cutting
• Zig-zag groove angles help resist stone retention and drilling
Size
12.00R24
(1)
Load
Range
H
Catalog
Number
29163
Tread
Depth
Max.
Speed
(*)
32nds mph
23
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
65 22.4
568 48.1
1222 12.3
313
(1) Please refer to the Tubes and Flaps Table on Page 86.
Approved
Wheel
8.50
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
14.1
358 431 8820 110 4000 760 8050 110 3650 760
60
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN
® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
XZL
™
OFF ROAD APPLICATIONS
All-terrain, all-position radial for special service such as
Emergency Response vehicles
• Self-cleaning, open shoulder tread design features offset elements to help enhance traction and floatation capabilities on varied terrains including snow, sand, mud and highway
• Non-directional design for versatility
• Full-width steel belts and elastic protector ply help provide added casing protection against most off road hazards
• Tubeless construction compatible with Automated Tire Inflation System (ATIS) and bead locks
Size
14.00R20
(1)
16.00R20
(1)
395/85R20 (1)
24R21
Load
Range
M
M
Catalog
Number
59177
Tread
Depth
Max.
Speed
(*)
32nds mph
29
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
55 22.8
578 49.5
1258 15.1
384
06306 34
Approved
Wheels
(Measuring wheel listed first.)
10.00V
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
17.1
434 421 11000 110 5000 760 9920 110 4500 760
55 23.9
607 52.9
1343 17.2
438 10.00W, 10.00V, 10.00 19.5
495 397 14540 110 6595 760
J
H
54331
76025
33
31
55
55
21.3
24.8
542
631
46.8
54.6
1189
1388
15.3
23.9
388
608
10.00V
18.00
447 12300 120
383 15700 85
5600
7100
830
590
(1) May be used with tube; please refer to the Tubes and Flaps Table on Page 86.
XZL
™
WIDE BASE
ON/OFF ROAD APPLICATIONS
All-position wide base radial designed for optimized on/off road traction
• Self-cleaning, open-shoulder tread design features offset elements to help enhance traction and floatation capabilities
• Stable block design helps ensure a consistent footprint, even in free rolling positions, to help deliver smooth even wear and a quiet ride
• Deep, application specific compounds help provide resistance to aggressions and abrasion common in off road service
• Full-width steel belts and elastic protector ply help protect the casing against shocks, bruising and penetrations
• Conventional 22.5" commercial sizes
Size
425/65R22.5
445/65R22.5
Load
Range
L
L
Catalog
Number
53254
84103
Tread
Depth
32nds
26
27
Max.
Speed (*) mph
60
60
Loaded Radius in.
20.6
21.2
mm
524
538
Overall Diameter Overall Width (‡) in.
44.8
46.0
mm
1139
1168
in.
16.6
17.6
mm
421
448
Approved Wheels
(Measuring wheel listed first.)
Revs
Per Mile
13.00, 12.25
14.00, 13.00
467
453
lbs.
Max. Load and Pressure
Single psi kg.
kPa
11400 120 5150 830
12300 120 5600 830
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
61
XZL+
™
OFF ROAD APPLICATIONS
All-terrain, all-position radial for special service in extremely demanding applications
• Self-cleaning, open shoulder tread design features offset elements to help enhance traction and floatation capabilities on varied terrains including snow, sand, mud and highway
• Non-directional design for versatility
• Tread pattern designed for cooler operation and robust performance
• Tubeless construction compatible with Automated Tire Inflation System (ATIS) and bead locks
Size
Load
Range
Catalog
Number
Tread
Depth
32nds
26
Max.
Speed (*) mph
55
Loaded Radius in.
21.1
mm
537
Overall Diameter Overall Width (‡) in.
46.3
mm
1176
in.
15.4
Approved Wheels
(Measuring wheel listed first.)
Revs
Per Mile mm
391 10.00W, 10.00, 10.00V
451
lbs.
Max. Load and Pressure
Single psi kg.
kPa
12300 120 5600 830 395/85R20 (1) J 94675
(1) May be used with tube; please refer to the Tubes and Flaps Table on Page 86.
XML
™
ON/OFF ROAD APPLICATIONS
All-terrain, all-position radial optimized for softsoil/mud mobility
• All-terrain non-directional computer enhanced tread design delivers exceptional soft soil mobility, through enhanced self-cleaning capabilities
• Full-width belt protection and elastic protector ply helps protect the casing from bruising and penetrations
• Offset shoulder designed for increased traction in soft soil
• Radial casing design optimized to operate at lower pressures to offer exceptional mobility and enhanced enveloping capabilities to resist impacts
Size
325/85R16
395/85R20 (1)
475/80R20
(1)
Load
Range
D
G
J
Catalog
Number
37984
99131
80341
Tread
Depth
32nds
21
Max.
Speed (*) mph
62
30
30
60
55
Loaded Radius in.
17.7
21.3
22.9
mm
450
541
582
(1) May be used with tube; please refer to the Tubes and Flaps Table on Page 86.
Overall Diameter Overall Width (‡) in.
38.7
46.7
50.1
mm
984
1187
1272
in.
12.9
15.4
18.9
mm
327
390
480
Approved Wheels
(Measuring wheel listed first.)
9.00
10.0W, 10.00, 10.00V
14.00V, 14.00
Revs
Per Mile
540
448
417
lbs.
Max. Load and Pressure
Single psi kg.
kPa
5070 70 2300 480
10200
11700
100
90
4625
5300
690
620
62
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN
® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
XDL
®
ON/OFF ROAD APPLICATIONS
High capacity tube-type drive tire designed for mostly off road application such as logging and mining
• Open shoulder design for enhanced self-cleaning capability and soft soil mobility
• Massive tread elements offer exceptional resistance to cuts and penetrations
• Application specific compound helps resist cutting, chipping and chunking common in severe off road service
• Maximum speed 50 mph*
20% Highway / 80% Off road
Size
Load
Range
J
Catalog
Number
30049
Tread
Depth
Max.
Speed
(*)
32nds mph
38
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(‡) in.
mm
50 23.1
586 49.4
1255 12.7
323
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (‡) in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
Max. Load and Pressure kPa lbs.
psi
Dual kg.
kPa
8.50, 8.00
14.1
358 422 9370 120 4250 830 8540 120 3875 830 12.00R24
(1)
(1) Please refer to the Tubes and Flaps Table on Page 86.
XS
™
EMERGENCY, CRASH, RESCUE VEHICLE
Soft soil, all-position radial for special service such as Emergency Response vehicles
• Tread design optimized to minimize sandy surface disturbance
• Efficient grip with exceptional floatation capabilities
24R20.5
Size
Load
Range
H
Catalog
Number
23002
Tread
Depth
32nds
21
Max.
Speed
(*) mph
50
Loaded Radius in.
24.4
mm
620
Overall Diameter Overall Width (‡) in.
54.1
mm
1374
in.
23.7
mm
602
Approved
Wheel
18.00
Revs
Per
Mile
388
lbs.
Max. Load and Pressure
Single psi kg.
kPa
15700 85 7100 590
Note: Wheel listed first is the measuring wheel.
(*) Exceeding the lawful speed limit is neither recommended nor endorsed.
(‡) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
MICHELIN
® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
Please consult wheel manufacturer’s load and inflation limits. Never exceed wheel manufacturer’s limits without permission of component manufacturer.
63
64
MICHELIN INFLATION CHARTS FOR TRUCK TIRES
To select the proper load and inflation table, locate your tire size in the following pages, then match your tire's sidewall markings to the table with the same sidewall markings. If your tire's sidewall markings do not match any table listed, please contact your Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of change, and Michelin continually updates its product information to reflect these changes. Printed material may not reflect the latest load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s maximum pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
Loads are indicated per axle.
WHEEL DIAMETER
15"
10.00R15 LRJ
XTA
PSI 75 kPa 520
LBS SINGLE 9530
LBS DUAL
KG SINGLE
KG DUAL
17560
4320
7970
80
550
10030
18500
4550
8390
85
590
10530
19420
4780
8810
90
620
11030
20320
5000
9220
95
660
11510
21220
5220
9630
100
690
12000
22100
5440
10020
105
720
12470
22980
5660
10420
110
760
12950
23860
5870
10820
115
790
13420
24720
6090
11210
120
830
13880
25580
6300
11600
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL
S 6940 LBS AT 120 PSI
D 6395 LBS AT 120 PSI
S 3150 KG AT 830 kPa
D 2900 KG AT 830 kPa
WHEEL DIAMETER
16"
325/85R16 LRD
XML
PSI kPa
25
170
LBS SINGLE 4450
KG SINGLE 2020
30
210
5150
2340
35
45
5820
2640
40
50
6480
2940
45
310
7120
3230
50
340
7750
3520
55
380
8360
3790
60
410
8960
4060
65
450
9560
4340
70
480
10140
4600
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL
S 5070 LBS AT 70 PSI
S 2300 KG AT 480 kPa
WHEEL DIAMETER
17.5"
10R17.5 LRG
XZA
215/75R17.5 LRG
XZE2
215/75R17.5 LRJ
XTA
235/75R17.5 LRJ
XTE2
245/70R17.5 LRJ
XTA2 ENERGY
PSI 65 70 75 80 85 90 95 100 105 110 115
590 620 660 690 720 760 790
7720 8010 8300 8600 8940 9280 9610
14560 15140 15720 16320 16940 17560 18160
3500 3640 3780 3900 4060 4220 4360
6600 6880 7160 7400 7680 7960 8240
120 125
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL kPa
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
450 480 520
12460
2990
5650
550
13120
3150
5950
13780
3310
6250
14420
3460
6540
15060
3620
6830
15700
3770
7120
16320
3920
7400
16940
4060
7680
17560
4210
7970
830
LBS SINGLE 5310 5640 5960 6270 6590 6890 7200 7500
LBS DUAL 9980 10600 11200 11800 12380 12960 13540 14100
KG SINGLE 2410 2560 2700 2840 2990 3130 3270 3400
KG DUAL 4530 4810 5080 5350 5620 5880 6140 6400
LBS SINGLE 6600 6950 7290 7630 7970 8310 8640 8960 9290 9610
18160
4360
8240
860
S 4805 LBS AT 115 PSI
D 4540 LBS AT 115 PSI
S 2180 KG AT 790 kPa
D 2060 KG AT 790 kPa
S
D
S
D
S
3750 LBS AT 100 PSI
3525 LBS AT 100 PSI
1700 KG AT 690 kPa
1600 KG AT 690 kPa
4805 LBS AT 120 PSI
D 4540 LBS AT 120 PSI
S 2180 KG AT 830 kPa
D 2060 KG AT 830 kPa
8400 8820 9230 9640 10050 10450 10840 11240 11620 12010 S 6005 LBS AT 125 PSI
15880 16680 17460 18220 18980 19740 20500 21240 21980 22700 D 5675 LBS AT 125 PSI
3810 4000 4190 4370 4560 4740 4920 5100 5270 5450 S 2725 KG AT 860 kPa
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
7200
8400
15880
3810
7200
7570
8820
16680
4000
7570
7920
9230
17460
4190
7920
8260
9640
18220
4370
8260
8610
10050
18980
4560
8610
8950
10450
19740
4740
8950
9300
10840
20500
4920
9300
9630
11240
21240
5100
9630
9970
11620
21980
5270
9970
10300
12010
22700
5450
10300
D
S
D
S
D
2575 KG AT 860 kPa
6005 LBS AT 125 PSI
5675 LBS AT 125 PSI
2725 KG AT 860 kPa
2575 KG AT 860 kPa
MICHELIN INFLATION CHARTS FOR TRUCK TIRES
To select the proper load and inflation table, locate your tire size in the following pages, then match your tire's sidewall markings to the table with the same sidewall markings. If your tire's sidewall markings do not match any table listed, please contact your Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of change, and Michelin continually updates its product information to reflect these changes. Printed material may not reflect the latest load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s maximum pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
Loads are indicated per axle.
WHEEL DIAMETER
19.5"
8R19.5 LRF
XZA
225/70R19.5 LRF
XDS2, XZE
225/70R19.5 LRG
XDS2, XZE
245/70R19.5 LRF
XZE
245/70R19.5 LRG
XZE
245/70R19.5 LRH
XDS2, XZE
265/70R19.5 LRG
XDE2+, XZE2+
265/70R19.5 LRJ
XTA2 ENERGY
285/70R19.5 LRH
XZA, XDE2+,
XZE2+
PSI 65 70 75 80 85 90 95 100 105 110 115 120
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL kPa
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
450 480
5080
520
5360
550
5670
590
5910
620
6150
660
6390
690
6610
720
6830
760
7050
9840 10280 10720 11140 11560 12000 12400 12800 13220
2300 2440 2570 2680 2800 2900 3000 3100 3200
4480 4680 4860 5040 5240 5440 5640 5840 6000
LBS SINGLE 5510
LBS DUAL 10400
5790
10880
6080
11440
6390
12000
6630
12460
6900
12980
7280
13660
KG SINGLE
KG DUAL
2500
4720
LBS SINGLE 5510
2620
4920
5790
2760
5200
6080
2900
5440
6390
3000
5640
6630
3140
5880
6900
3300
6200
7280
LBS DUAL
KG SINGLE
KG DUAL
7430 7690 7940
10400 10880 11440 12000 12460 12980 13660 13960 14460 15000
2500 2620 2760 2900 3000 3140 3300 3380 3480 3600
4720 4920 5200 5440 5640 5880 6200 6320 6560 6800
LBS SINGLE
LBS DUAL
KG SINGLE
7280
13660
3300
7480
14060
3400
7780
14620
3540
8160
15440
3700
790 830
S 3525 LBS AT 110 PSI
D 3305 LBS AT 110 PSI
S 1600 KG AT 760 kPa
D 1500 KG AT 760 kPa
S 3640 LBS AT 95 PSI
D 3415 LBS AT 95 PSI
S 1650 KG AT 660 kPa
D 1550 KG AT 660 kPa
S 3970 LBS AT 110 PSI
D 3750 LBS AT 110 PSI
S 1800 KG AT 760 kPa
D 1700 KG AT 760 kPa
S 4080 LBS AT 95 PSI
D 3860 LBS AT 95 PSI
S 1850 KG AT 660 kPa
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
6780
12840 13520 14200 14860 15520 16160 16800 17440 18080 18700 D 4675 LBS AT 120 PSI
3080
5820
6200
7280
6360
7480
6640
7780
7000
8160 8380 8670 9080
13660 14060 14620 15440 15760 16300 17200
3300
6200
7140
3240
6130
3400
6360
7500
3400
6440
3540
6640
7850
3560
6740
3700
7000
8200
3720
7040
3800
7160
8540
3870
7330
3940
7400
8880
4030
7620
4120
7800
9220
4180
7910
9550
4330
8200
9880
4480
8480
D 1750 KG AT 660 kPa
S 4540 LBS AT 110 PSI
D 4300 LBS AT 110 PSI
S 2060 KG AT 760 kPa
D 1950 KG AT 760 kPa
S 4940 LBS AT 120 PSI
S
D
2240 KG AT 830 kPa
2120 KG AT 830 kPa
LBS SINGLE 7230
LBS DUAL 13660
7680
14500
8110
15320
8540
16140
8970
16940
9390
17740
9800
18520
10210
19300
10620
20060
11020
20820
KG SINGLE
KG DUAL
LBS SINGLE
3280
6200
3480
6580
3680
6950
8250
3870
7320
8680
4070
7680
9110
4260
8050
9540
4450
8400
9960
4630
8750
10380
4820
9100
10790
5000
9440
11200 11610 12010
S
D
S
D
S
5510 LBS AT 110 PSI
5205 LBS AT 110 PSI
2500 KG AT 760 kPa
2360 KG AT 760 kPa
6005 LBS AT 120 PSI
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
15580 16420 17220 18040 18840 19620 20400 21180 21940 22700 D 5675 LBS AT 120 PSI
3740
7070
8780
3980
7480
3940
7450
9250
16500 17360 18220 19080 19920 20760 21580 22400 23220 24020 D 6005 LBS AT 120 PSI
4200
7870
4130
7810
9710 10160 10610 11050 11490 11930 12360 12790 S 6395 LBS AT 120 PSI
4400
8260
4330
8180
4610
8650
4520
8550
4810
9040
4710
8900
5010
9420
4890
9250
5210
9790
5080
9610
5410
10160
5270
9950
5610
10530
5450
10300
5800
10900
S
D
S
D
2725 KG AT 830 kPa
2575 KG AT 830 kPa
2900 KG AT 830 kPa
2725 KG AT 830 kPa
More Wheel Diameter 19.5" continues on the next page.
65
66
MICHELIN INFLATION CHARTS FOR TRUCK TIRES
To select the proper load and inflation table, locate your tire size in the following pages, then match your tire's sidewall markings to the table with the same sidewall markings. If your tire's sidewall markings do not match any table listed, please contact your Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of change, and Michelin continually updates its product information to reflect these changes. Printed material may not reflect the latest load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s maximum pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
Loads are indicated per axle.
WHEEL DIAMETER
19.5"
285/70R19.5 LRJ
XTE2
305/70R19.5 LRJ
XZA
PSI kPa
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
445/45R19.5 LRM
XTA2 ENERGY
LBS SINGLE
KG SINGLE
65
450
70
480
75
520
80
550
85 90 95 100 105 110 115 120 125 130
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL
590 620 660 690 720 760 790 830 860 900
10520 11010 11500 11980 12460 12930 13400 13860 14320 14780 S 7390 LBS AT 130 PSI
19760 20680 21600 22500 23400 24280 25160 26040 26920 27760 D 6940 LBS AT 130 PSI
4770 4990 5220 5430 5650 5860 6080 6290 6500 6700 S 3350 KG AT 900 kPa
8960 9380 9800 10210 10610 11010 11410 11810 12210 12600 D 3150 KG AT 900 kPa
9530 10030 10530 11030 11510 12000 12470 12950 13420 13880
17560 18500 19420 20320 21220 22100 22980 23860 24720 25580
4320 4550 4780 5000 5220 5440 5660 5870 6090 6300
7970 8390 8810 9220 9630 10020 10420 10820 11210 11600
S 6940 LBS AT 120 PSI
D 6395 LBS AT 120 PSI
S 3150 KG AT 830 kPa
D 2900 KG AT 830 kPa
14120 14780 15440 16080 16720 17360 17980 18600 19220 19840 S 9920 LBS AT 130 PSI
6400 6700 7000 7290 7580 7870 8160 8440 8720 9000 S 4500 KG AT 900 kPa
WHEEL DIAMETER
20"
10.00R20 LRH
XZE2
G20 (14.00R20)
LRM
XZA4
14.00R20 LRM
XZL
16.00R20 LRM
XZL
395/85R20 LRG
XML, XZL
395/85R20 LRJ
XZL, XZL+
PSI kPa
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
65
450
70 75 80 85 90 95 100 105 110 115
480 520 550 590 620 660 690 720 760 790
9120 9630 10140 10650 11150 11640 12130 12610 13090 13560
16140 17060 17960 18860 19740 20620 21480 22340 23180 24020
4140
7320
4370
7740
4600
8150
4830
8550
5060
8950
5280
9350
5500 5720 5940 6150
9740 10130 10510 10900
15660 16500 17200 18180 18920 19660 20400 20940 21480 22000
28640 30120 31600 33080 34560 36040 37480 38600 39720 40800
7100 7480 7860 8250 8580 8920 9250 9500 9760 10000
13000 13680 14360 15000 15680 16360 17000 29520 18040 18500
LBS SINGLE 14440 15320 16200 17060 17900 18740 19560 20400 21200 22000
LBS DUAL 26040 27640 29200 30760 32280 33800 35280 36760 38240 39680
KG SINGLE 6550
KG DUAL 11810
6950
12540
7350
13240
7740
13950
8120
14640
8500
15330
8870
16000
9250
16670
9620
17350
10000
18000
LBS SINGLE 19100 20200 21400 22600 23600 24800 25800 27000 28000 29080
KG SINGLE 8660
LBS SINGLE
KG SINGLE
LBS SINGLE
KG SINGLE
9160 9710 10250 10700 11250 11700 12250 12700 13190
120
830
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL
S 6780 LBS AT 115 PSI
D 6005 LBS AT 115 PSI
S 3075 KG AT 790 kPa
D 2725 KG AT 790 kPa
S 11000 LBS AT 115 PSI
D 10200 LBS AT 115 PSI
S 5000 KG AT 790 kPa
D 4625 KG AT 790 kPa
S 11000 LBS AT 110 PSI
D 9920 LBS AT 110 PSI
S 5000 KG AT 760 kPa
D 4500 KG AT 760 kPa
S 12300 LBS AT 125 PSI
S 5600 KG AT 860 kPa
16820
7640
17560
7960
18280
8280
18740
8500
S 9370 LBS AT 95 PSI
S 4250 KG AT 660 kPa
16900 17780 18660 19540 20400 21200 22200 23000 23800 24600 S 12300 LBS AT 125 PSI
7670 8060 8460 8860 9250 9620 10070 10430 10800 11200 S 5600 KG AT 860 kPa
MICHELIN INFLATION CHARTS FOR TRUCK TIRES
To select the proper load and inflation table, locate your tire size in the following pages, then match your tire's sidewall markings to the table with the same sidewall markings. If your tire's sidewall markings do not match any table listed, please contact your Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of change, and Michelin continually updates its product information to reflect these changes. Printed material may not reflect the latest load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s maximum pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
Loads are indicated per axle.
WHEEL DIAMETER
20"
PSI kPa
LBS SINGLE
475/80R20 LRJ
XML
KG SINGLE
45
310
13440
6100
50
340
14620
6630
55
380
15780
7160
60
410
16920
7670
65
450
18040
8180
70
480
19140
8680
75
520
20200
9160
80
550
21200
9620
85
590
22400
10160
90
620
23400
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL
S 12300 LBS AT 125 PSI
10600 S 5600 KG AT 860 kPa
WHEEL DIAMETER
20.5"
24R20.5 LRH
XS
PSI kPa
LBS SINGLE
KG SINGLE
40
280
17180
7790
45
310
18880
8560
50
340
20600
9340
55
380
22200
10070
60
410
23800
10800
65
450
25400
11520
70
480
26800
12160
75
520
28400
12880
80
550
30000
13610
85
590
31400
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL
S 15700 LBS AT 85 PSI
14200 S 7100 KG AT 590 kPa
WHEEL DIAMETER
21"
24R21 LRH
XZL
PSI kPa
LBS SINGLE
KG SINGLE
40
280
17180
7790
45
310
18880
8560
50
340
20600
9340
55
380
22200
10070
60
410
23800
10800
65
450
25400
11520
70
480
26800
12160
75
520
28400
12880
80
550
30000
13610
85
590
31400
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL
S 15700 LBS AT 85 PSI
14200 S 7100 KG AT 590 kPa
67
68
MICHELIN INFLATION CHARTS FOR TRUCK TIRES
To select the proper load and inflation table, locate your tire size in the following pages, then match your tire's sidewall markings to the table with the same sidewall markings. If your tire's sidewall markings do not match any table listed, please contact your Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of change, and Michelin continually updates its product information to reflect these changes. Printed material may not reflect the latest load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s maximum pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
Loads are indicated per axle.
WHEEL DIAMETER
22.5"
9R22.5 LRF
XZE
10R22.5 LRF
XZE
10R22.5 LRG
XDE M/S, XZE
PSI kPa
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
70
480
6740
13080
3060
5920
8160
15440
3700
7000
8160
15440
3700
7000
11R22.5 LRG
LBS SINGLE 9060 9540 9980
XD4, XDA3,
XDA5, XDE M/S,
XDN2,
XT-1, XTE,
XZA-1+,
XZA3
+
Evertread,
XZE2, XZY3
11R22.5 LRH
LBS DUAL
KG SINGLE
KG DUAL
17520
4100
7960
18320
4320
8320
19040
4520
8640
LBS SINGLE 9540 9980
X Works XDY
XDE M/S ,
XDN2, XDS2,
XDY-2, XDY3,
XZA3
+
Evertread,
XZE2, XZY3
LBS DUAL
KG SINGLE
KG DUAL
18320
4320
8320
11R22.5 LRH
XZU 3, XDE2+
12R22.5 LRH
XDS, XDN2,
XZE , XZY3
12R22.5 LRJ
XZU2
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
9040
10750
19060
4880
8650
9530
17560
4320
7970
10400
19960
4720
With chip and cut resistant tread compound.
More Wheel Diameter 22.5" continues on the next page.
19040
4520
8640
9400
11320
20060
5130
9100
10030
18500
4550
8390
10900
20760
4940
75
520
7120
13640
3230
6200
8560
16180
3880
7320
8560
16180
3880
7320
80
550
7460
14200
3380
6440
8960
16920
4060
7640
8960
16920
4060
7640
85
590
7780
14760
3520
6680
9350
17640
4240
8000
9350
17640
4240
8000
90
620
95
660
8160 8470
15440 16020
3700
7000
9700
3840
7280
10050
18340 19040
4400 4560
8320 8640
9700 10050
18340 19040
4400
8320
4560
8640
100
690
8780
16600
3980
7560
10410
19760
4720
8960
10410
19760
4720
8960
105
720
9080
17200
4120
7800
10720
20300
4860
9200
110
760
11030
20840
5000
9440
115
790
11350
21420
5150
9720
10440 11020 11460 11900 12350
19800 20820 21660 22500 23360
4740
9000
4740
5000
9440
5000
5200
9840
5200
5400
5400
5600
10240 10600
5600 5740 5880
120
830
6000
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL
S 4540 LBS AT 105 PSI
D 4300 LBS AT 105 PSI
S 2060 KG AT 720 kPa
D 1950 KG AT 720 kPa
S 5205 LBS AT 100 PSI
D 4940 LBS AT 100 PSI
S 2360 KG AT 690 kPa
D 2240 KG AT 690 kPa
S 5675 LBS AT 115 PSI
D 5355 LBS AT 115 PSI
S 2575 KG AT 790 kPa
D 2430 KG AT 790 kPa
S 6175 LBS AT 105 PSI
D 5840 LBS AT 105 PSI
S 2800 KG AT 720 kPa
D 2650 KG AT 720 kPa
10440 11020 11460 11900 12350 12640 12930 13220 S 6610 LBS AT 120 PSI
19800 20820 21660 22500 23360 23580 23800 24020 D 6005 LBS AT 120 PSI
S 3000 KG AT 830 kPa
9000
9760
11880
21060
5390
9550
10530
19420
4780
8810
11380
21560
5160
9440 9840
11030 11510
20320 21220
5000 5220
9220 9630
12010 12410
22700 23140
5450 5640
10300 10520
12440 12990
22060 23020
5640 5890
10010 10440
10600
10900
14080
24940
6390
11310
12470
22980
5660
10420
13220
24020
6000
10240
10720
13540
24000
6140
10890
12000
22100
5440
10020
12810
23580
5820
10840
11840
15140
26840
6870
12170
13420
24720
6090
11210
14260
26100
6480
10720
11360
14600
25900
6620
11750
12950
23860
5870
10820
13740
25060
6240
10900 D 2725 KG AT 830 kPa
13880 S 6940 LBS AT 120 PSI
25580 D 6395 LBS AT 120 PSI
6300 S 3150 KG AT 830 kPa
11600 D 2900 KG AT 830 kPa
14780 S 7390 LBS AT 120 PSI
27120 D 6780 LBS AT 120 PSI
6700 S 3350 KG AT 830 kPa
12300 D 3075 KG AT 830 kPa
15660 S 7830 LBS AT 120 PSI
27760 D 6940 LBS AT 120 PSI
7100 S 3550 KG AT 830 kPa
12600 D 3150 KG AT 830 kPa
MICHELIN INFLATION CHARTS FOR TRUCK TIRES
To select the proper load and inflation table, locate your tire size in the following pages, then match your tire's sidewall markings to the table with the same sidewall markings. If your tire's sidewall markings do not match any table listed, please contact your Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of change, and Michelin continually updates its product information to reflect these changes. Printed material may not reflect the latest load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s maximum pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
Loads are indicated per axle.
WHEEL DIAMETER
22.5"
235/80R22.5 LRG
XZE
255/70R22.5 LRH
XD2, XZE
255/80R22.5 LRG
XDE M/S, XZE
275/70R22.5 LRJ
XTY2
275/70R22.5 LRJ
XZA2 ENERGY,
XZE2+, XZU2
PSI
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
70 75 80 85 90 95 100 105 110 115 120 125 130
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL kPa
LBS SINGLE
LBS DUAL
KG SINGLE 2950 3120 3290 3450 3610 3770 3930 4090 4240
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
8380
15880
3800
7200
8740
16440
3960
7440
9100
17100
4120
7760
9350
17640
4240
8000
9790
17820
4440
8080
10130
18440
4600
8360
10410
18700
4720
8480
LBS SINGLE 7750 8140 8600 8880 9240 9610 9950 10300 10410
10800
19660
4900
8920
11020
20280
5000
9200
LBS DUAL
KG DUAL
480
6510
12280 12980 13680 14360 15020 15680 16340 17000 17640
5570
14100
6400
520
6880
5890
14820
6720
550
7250
6210
15440
7000
590
7610
6510
16160
7320
620
7960
6810
16820
7640
660
8320
7110
17640
8000
690
8660
7410
18100
8200
720
9010
7710
18740
8520
760
9350
8000
19220
KG SINGLE 3520 3700 3900 4020 4200 4360 4520 4680 4720
8720
790 830
9530 10030 10530 11030 11510 12000 12470 12950 13420 13880
17560 18500 19420 20320 21220 22100 22980 23860 24720 25580
4340 4540 4800 4980 5240 5440 5620 5880 6060 6300
860 900
S 4675 LBS AT 110 PSI
D 4410 LBS AT 110 PSI
S 2120 KG AT 760 kPa
D 2000 KG AT 760 kPa
S
D
S
D
S
5510 LBS AT 120 PSI
5070 LBS AT 120 PSI
2500 KG AT 830 kPa
2300 KG AT 830 kPa
5205 LBS AT 110 PSI
D 4805 LBS AT 110 PSI
S 2360 KG AT 760 kPa
D 2180 KG AT 760 kPa
S
D
S
6940 LBS AT 120 PSI
6395 LBS AT 120 PSI
3150 KG AT 830 kPa
7960 8360 8840 9200 9640 10000 10360 10800 11160 11600 D 2900 KG AT 830 kPa
9880 10340 10800 11250 11700 12140 12580 13020 13460 13880 S 6940 LBS AT 130 PSI
19420 20320 21220 22100 22980 23860 24720 25580 D 6395 LBS AT 120 PSI
4480 4690 4900 5100 5310 5510 5710 5910 6110 6300 S 3150 KG AT 900 kPa
8810 9220 9630 10020 10420 10820 11210 11600 D 2900 KG AT 830 kPa
275/80R22.5 LRG
LBS SINGLE 9000 9450 9880 10310 10740 11020 11560 11960 12350
XDA ENERGY,
XDA3, XDA5,
XDE M/S, XDE2+
XDN2,
XTA ENERGY,
XT-1, XTE,
XZA-1+, XZA3
+
Evertread, XZE2
LBS DUAL 16380 17200 18160 18760 19540 20280 21040 21760 22700
KG SINGLE 4080 4280 4480 4680 4880 5000 5240 5420 5600
KG DUAL
275/80R22.5 LRH
XDE2+,
XZA3
+
Evertread,
XZE
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
7440 7800 8240 8520 8880 9200 9560 9880 10300
9830 10350 10870 11380 11880 12380 12870 13360 13840 14320
18160 19120 20060 21000 21940 22860 23760 24660 25560 26440
4480 4680 4940 5140 5420 5600 5800 6060 6240 6500
8240 8640 9120 9520 10000 10360 10720 11200 11520 12000
With chip and cut resistant tread compound.
More Wheel Diameter 22.5" continues on the next page.
S 6175 LBS AT 110 PSI
D 5675 LBS AT 110 PSI
S 2800 KG AT 760 kPa
D 2575 KG AT 760 kPa
S 7160 LBS AT 120 PSI
D 6610 LBS AT 120 PSI
S 3250 KG AT 830 kPa
D 3000 KG AT 830 kPa
69
70
MICHELIN INFLATION CHARTS FOR TRUCK TIRES
To select the proper load and inflation table, locate your tire size in the following pages, then match your tire's sidewall markings to the table with the same sidewall markings. If your tire's sidewall markings do not match any table listed, please contact your Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of change, and Michelin continually updates its product information to reflect these changes. Printed material may not reflect the latest load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s maximum pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
Loads are indicated per axle.
WHEEL DIAMETER
22.5"
295/60R22.5 LRJ
X MultiWay XD,
XZA2 ENERGY
295/80R22.5 LRH
XZA2 ENERGY,
XZE2+
295/80R22.5 LRJ
X Coach XZ
305/70R22.5 LRL
XZU2
305/85R22.5 LRJ
XZU 3
315/80R22.5 LRL
XDN2 GRIP,
XDY3, XZA1,
XZA2 ENERGY,
XZY3
315/80R22.5 LRL
XZU S2
PSI 75 80 85 90 95 100 105 110 115 120 123 kPa
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
520 550 590 620 660 690 720 760 790 830
10520 11010 11500 11980 12460 12930 13400 13860
19300 20200 21100 21980 22860 23720 24580 25440
4770 4990 5220 5430 5650 5860 6080 6290
8750 9160 9570 9970 10370 10760 11150 11540
850
LBS SINGLE 10750 11320 11880 12440 12990 13540 14080 14600 15140 15660
LBS DUAL 19060 20060 21060 22060 23020 24000 24940 25900 26840 27760
KG SINGLE 4880 5130 5390 5640 5890 6140 6390 6620 6870 7100
KG DUAL 8650 9100 9550 10010 10440 10890 11310 11750 12170 12600
LBS SINGLE 10750 11320 11880 12440 12990 13540 14080 14600 15140 15660 15660
LBS DUAL 19060 20060 21060 22060 23020 24000 24940 25900 26840 27760 27760
KG SINGLE 4880 5130 5390 5640 5890 6140 6390 6620 6870 7100 7100
KG DUAL 8650 9100 9550 10010 10440 10890 11310 11750 12170 12600 12600
LBS SINGLE 10750 11320 11880 12440 12990 13540 14080 14600 15140 15660
LBS DUAL 19060 20060 21060 22060 23020 24000 24940 25900 26840 27760
KG SINGLE 4880 5130 5390 5640 5890 6140 6390 6620 6870 7100
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
8650 9100
11680
21420
5300
9720
9550
12200
22200
5540
10080
10010
12700
23120
5760
10480
10440
13220
24020
6000
10900
10890
13660
24860
6200
11280
11310
14140
25740
6420
11680
11750
14780
27120
6700
12300
12170
15140
27680
6820
12480
12600
15660
28640
7100
13000
LBS SINGLE 12830 13340 13880 14380 14880 15220 15840 16540
125 130
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL
860 900
14320 14780 S 7390 LBS AT 130 PSI
26280 27120 D 6780 LBS AT 130 PSI
6460 6700 S 3350 KG AT 900 kPa
11880 12300 D 3075 KG AT 900 kPa
S 7830 LBS AT 120 PSI
D 6940 LBS AT 120 PSI
S 3550 KG AT 830 kPa
D 3150 KG AT 830 kPa
S 7830 LBS AT 123 PSI
D 6940 LBS AT 123 PSI
S 3550 KG AT 850 kPa
D 3150 KG AT 850 kPa
S 7830 LBS AT 120 PSI
D 6940 LBS AT 120 PSI
S 3550 KG AT 830 kPa
D 3150 KG AT 830 kPa
S 7830 LBS AT 120 PSI
D 7160 LBS AT 120 PSI
S 3550 KG AT 830 kPa
D 3250 KG AT 830 kPa
17620 18180 S 9090 LBS AT 130 PSI
LBS DUAL
KG SINGLE
KG DUAL
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
23360
5820
10600
24280
6060
11000
25580
6300
11600
26180
6520
11880
27080
6740
12280
27760
6900
12600
28840
7180
13080
30440
7500
13800
14240 14900 15560 16220 16860 17500 18140 18760
23540 24640 25740 26800 27880 28960 30000 31040
6460 6760 7060 7360 7650 7940 8230 8510
10680 11180 11680 12160 12650 13140 13610 14080
32040
7960
14480
33080
8250
15000
D
S
D
8270 LBS AT 130 PSI
4125 KG AT 900 kPa
3750 KG AT 900 kPa
19380 20000 S 10000 LBS AT 130 PSI
32040 33080 D 8270 LBS AT 130 PSI
8790 9070 S 4535 KG AT 900 kPa
14530 15000 D 3750 KG AT 900 kPa
365/70R22.5 LRL
LBS SINGLE 14700 15420 16140 16860 17560 18260 18960 19640 20400 21000 S 10500 LBS AT 125 PSI
XZA
KG SINGLE 6670 6990 7320 7650 7970 8280 8600 8910 9240 9500 S 4750 KG AT 860 kPa
More Wheel Diameter 22.5" continues on the next page.
MICHELIN INFLATION CHARTS FOR TRUCK TIRES
To select the proper load and inflation table, locate your tire size in the following pages, then match your tire's sidewall markings to the table with the same sidewall markings. If your tire's sidewall markings do not match any table listed, please contact your Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of change, and Michelin continually updates its product information to reflect these changes. Printed material may not reflect the latest load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s maximum pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
Loads are indicated per axle.
WHEEL DIAMETER
22.5"
385/65R22.5 LRJ
XZY3
385/65R22.5 LRL
XFE
425/65R22.5 LRL
XZL, XZU S, XZY3
425/65R22.5 LRL
XFE
PSI kPa
75
520
80
550
85
590
90
620
95
660
100
690
105
720
110
760
115
790
120
825
LBS SINGLE 13440 13880 14700 15300 16100 16460 17020 17640 18100 18740
120
830
KG SINGLE
LBS SINGLE
6120 6300 6700
14120
6940
14780
7300
15440
7480
16080
7700
16720
8000
17360
8200
17980
8500
18600
125
860
130
900
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL
S 9370 LBS AT 120 PSI
S 4250 KG AT 830 kPa
19220 19840 S 9920 LBS AT 130 PSI
KG SINGLE 6400 6700 7000 7290 7580 7870 8160 8440
LBS SINGLE 15660 16480 17300 18120 18920 19700 20400 21200 22000 22800
8720 9000 S 4500 KG AT 900 kPa
S 11400 LBS AT 120 PSI
KG SINGLE 7100 7480 7850 8220 8580 8940 9250 9620 9980
LBS SINGLE 15660 16480 17300 18120 18920 19700 20400 21200 22000 22800
10300
KG SINGLE 7080 7420 7850 8220 8580 8940 9250 9620 9980 10300
S
S
S
5150 KG AT 830 kPa
11400 LBS AT 120 PSI
5150 KG AT 825 kPa
445/50R22.5 LRL
X One XDA Energy,
X One XDN2,
X One XTA,
X One XTE
LBS SINGLE 13880 14620 15360 16060 16780 17480 18180 18740 19560
KG SINGLE 6300 6640 6960 7280 7620 7940 8240 8500 8860
445/65R22.5 LRL
XZL
445/65R22.5 LRL
XZY3
LBS SINGLE 17320 18180 18960 19740 20400 21200 22000 22800 23400
KG SINGLE 7900 8250 8640 8940 9250 9640 9920 10300 10580
LBS SINGLE 18220 19080 19920 20800 21600 22400 23200
KG SINGLE 8260 8650 9040 9430 9800 10160 10520
445/65R22.5 LRM
LBS SINGLE 18220 19080 19920 20800 21600 22400 23200
XFE
455/55R22.5 LRL
KG SINGLE 8260 8650 9040 9430 9800 10160 10520
LBS SINGLE 15000 15800 16580 17360 18120 18880 19640 20400 21200
X One XDA Energy,
X One XDN2,
X One XTE
455/55R22.5 LRM
KG SINGLE 6800 7160 7520 7880 8220 8560 8900 9250 9580
LBS SINGLE
X One XZU S,
X One XZY3
KG SINGLE
With chip and cut resistant tread compound.
16580 17360 18120 18880 19640 20400 21200
7520 7880 8220 8560 8900 9250 9580
20400
9250
24600 S 12300 LBS AT 120 PSI
11200 S 5600 KG AT 830 kPa
24000 24800 25600 S 12800 LBS AT 130 PSI
10890 11180 11600 S 5800 KG AT 900 kPa
24000 24800 25600 S 12800 LBS AT 130 PSI
10890 11180 11600 S 5800 KG AT 900 kPa
22000
10000
S 10200 LBS AT 120 PSI
S 4625 KG AT 830 kPa
S 11000 LBS AT 120 PSI
S 5000 KG AT 830 kPa
22000 22600 23400 S 11700 LBS AT 130 PSI
10000 10240 10600 S 5300 KG AT 900 kPa
71
72
MICHELIN INFLATION CHARTS FOR TRUCK TIRES
To select the proper load and inflation table, locate your tire size in the following pages, then match your tire's sidewall markings to the table with the same sidewall markings. If your tire's sidewall markings do not match any table listed, please contact your Michelin dealer for the applicable load and inflation table.
Industry load and inflation standards are in a constant state of change, and Michelin continually updates its product information to reflect these changes. Printed material may not reflect the latest load and inflation standards.
NOTE: Never exceed the wheel manufacturer’s maximum pressure limitation.
S = Single configuration, or 2 tires per axle.
D = Dual configuration, or 4 tires per axle.
Loads are indicated per axle.
WHEEL DIAMETER
24"
12.00R24 LRH
XZY
12.00R24 LRJ
XDL
PSI kPa 480 520 550 590 620 660 690 720 760
LBS SINGLE 12660 13320 13960 14560 15160 16100 16620 17140 17640
LBS DUAL 24480 25560 26600 27640 28640 29560 30440 31320 32200
KG SINGLE
KG DUAL
LBS SINGLE
70
5740
11120
75
6040
11440
80
6340
12080
85
6600
12560
90
6880
13000
95
7300
13400
100
7540
13800
105
7780
14200
110
8000
14600
115
790
120
830
S
D
S
D
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL
8820 LBS AT 110 PSI
8050 LBS AT 110 PSI
4000 KG AT 760 kPa
3650 KG AT 760 kPa
13320 13960 14560 15160 16100 16620 17140 17640 18200 18740 S 9370 LBS AT 120 PSI
LBS DUAL
KG SINGLE
KG DUAL
25560 26600 27640 28640 29560 30440 31320 32200 33200 34160 D 8540 LBS AT 120 PSI
6040 6340 6600 6880 7300 7540 7780 8000 8260 8500 S 4250 KG AT 830 kPa
11440 12080 12560 13000 13400 13800 14200 14600 15040 15500 D 3875 KG AT 830 kPa
WHEEL DIAMETER
24.5"
11R24.5 LRG
PSI kPa
70
480
LBS SINGLE 9640
75
520
80
550
85
590
90
620
95
660
100
690
105
720
10140 10620 11100 11680 12190 12700 13220
XDA3, XDA5,
XDE M/S, XDN2,
XT-1, XTE,
XZA-1+,
XZA3
+
Evertread,
XZE2, XZY3
LBS DUAL
KG SINGLE
KG DUAL
18640 19480 20280 21040 22040 22700 23360 24020
4380
8440
4600
8840
4820
9200
5040
9560
5300 5540 5780 6000
10000 10320 10640 10900
110
760
115
790
120
830
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL
S 6610 LBS AT 105 PSI
D 6005 LBS AT 105 PSI
S 3000 KG AT 720 kPa
D 2725 KG AT 720 kPa
11R24.5 LRH
LBS SINGLE 10140 10620 11100 11680 12190 12700 13220 13580 13940 14320 S 7160 LBS AT 120 PSI
X Works XDY,
XDA5, XDE M/S ,
XDN2, XDS2,
XDY-2, XDY3,
XDY-EX2, XZE2,
XZY3
LBS DUAL
KG SINGLE
KG DUAL
12R24.5 LRH
XDY3, XZY3
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
19480 20280 21040 22040 22700 23360 24020 24820 25620 26440 D 6610 LBS AT 120 PSI
4600
8840
4820
9200
5040
9560
5300 5540 5780 6000 6160 6320 6500 S 3250 KG AT 830 kPa
10000 10320 10640 10900 11280 11640 12000 D 3000 KG AT 830 kPa
11040 11580 12080 12790 13300 13820 14320 14760 15200 15660 S 7830 LBS AT 120 PSI
21200 22080 22920 23360 24380 25400 26440 27160 27880 28640 D 7160 LBS AT 120 PSI
5000
9600
5260
10000
5480
10400
5800
10600
6040
11080
6280
11560
6500
12000
6700
12320
6900
12640
7100
13000
S
D
3550 KG AT 830 kPa
3250 KG AT 830 kPa
S 6175 LBS AT 110 PSI
275/80R24.5 LRG
LBS SINGLE 9090 9540 9880 10420 10840 11350 11670 12080 12350
16540 17360 18160 18960 19720 20820 21240 21980 22700
XDA3, XDA5,
XDN2, XT-1,
XTE, XZA-1+,
XZA3
+
Evertread,
XZE2
LBS DUAL
KG SINGLE
KG DUAL
4120
7480
4320
7880
4480
8240
4720
8600
4920
8960
5150
9440
5300
9640
5480
9960
5600
10300
D 5675 LBS AT 110 PSI
S 2800 KG AT 760 kPa
D 2575 KG AT 760 kPa
305/75R24.5 LRJ
XDA5, XZE2,
XZU 3
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
With chip and cut resistant tread compound.
11360 11960 12550 13140 13720 14300 14860 15420 15980 16540 S 8270 LBS AT 120 PSI
19660 20700 21740 22760 23760 24760 25740 26720 27680 28640 D 7160 LBS AT 120 PSI
5150 5420 5690 5960 6220 6490 6740 6990 7250 7500 S 3750 KG AT 830 kPa
8920 9390 9860 10320 10780 11230 11680 12120 12560 13000 D 3250 KG AT 830 kPa
Retread
Products
73
74
MICHELIN
®
RETREADS QUICK REFERENCE TREAD GUIDE
Product Availability
(Tread Depth in Shaded Boxes)
STANDARD SIZES
Tread Size
Size \ # DIE
140
Spread Axle Sizes
(1)
XDU ® S
XDY ®
XDY-1
™
XZA ® (2)
XZE ® (2)
XZE2
™
XZE ® SA
XZU ® 2
XZU
®
S
XZY ®
XZY-1 ™
XZY-2 ™
XT-1 ® AT* (2)
XTA ® -1 (2)
XTA ®
XTY ® SA
XDA2 ® 23 AT*
XDA2 ® 19 AT*
XDA-HT
™
High Torque
XDA ®
XD4 ®
XDN ® 2
XDN ®
XDHT ® (2)
XDC ® LL
XDC ® 22
XDC ® 18
XM+S4 ®
XDE ® M/S
XDS
®
13
150
13
160 170 180 190 200 210 220 230 240 250
162\#4 168\#5 177\#6 194\#7 203\#8 211\#8.5N 219\#9 225\#9.5 232\#10 238\#10.5 252 \#12
185/225 195/235 205/245
23
28 28
23
19
28
215/255
23
19
28
225/265 245/285
23
28 28 28
260
28
25
13
21
18
13
16
19
21
18
13
18
23
22
21
20
15
18
23
22
21
20
26
15
18
28
26
23
14
22
21
22
25
26
30
15
18
26
30
15
18
28
27
26
23
14
23
22
18
21
22
18
21
22
25
32
26
30
15
18
28
27
26
23
22
25
32
26
30
26
27
23
26
32
30
32
20
25
26
25
32
32
18
11
18
18
12
11
18
18
20
26
12
11
18
26
18
20
26
12
11
18
20
12
11
18
24
26
18
20
26
20
18
24
26
18
20
26
11
16
20
24
26
20
26
26
11
20
16
22 22 22
270
32
26
280
26
WIDE BASE AND MICHELIN
®
X ONE
®
RETREAD SIZES
320/365 (1) 350/395 (1) 375/425 (1) 385/435 (1) Tread Size
XTE2 ® Wide Base
XZA
®
Wide Base
XZH ™ Wide Base
XZL ™ Wide Base
XZY
®
Wide Base
X One ® XDA ®
X One ® XDA-HT ™
X One
®
XTA
®
X One ® XTE ®
X One ® XZU ® S
290/345 (1)
20
19 19
20
19
20
30
13
16 16
390
24
26
390/430 (1) 400
26
23
For up-to-date product information please visit www.michelintruck.com
* AT designated Advanced Technology ™ compounds for fuel savings.
(1) Tread widths with two measurements have wings. The first number is tread base width in mm. The second number is the overall width, wing tip to tip.
(2) Available siped. Consult Michelin Retread Technologies dealers for availability.
Federal Motor Carrier Safety Regulations, 9 C.F.R. § 395.75 (d), specify that “no bus shall be operated with regrooved, recapped or retreaded tires on the front wheels.”
CUSTOM MOLD
™
TREAD GUIDE
Size
XDA2 ® 23 AT*
XD4 ®
XDN ®
XDHT ®
XDS ®
XZA ®
XZE ®
XT-1
®
AT
XTA
®
-1
XZY
®
Wide Base
X One
®
XTA
®
X One
®
XTE
®
245/70R19.5
–
–
18
–
–
–
–
–
–
–
–
–
11R22.5
25
15
18
12
23
–
25
23
11
–
–
–
11R24.5
25
15
18
12
23
–
–
23
–
–
11
–
275/80R22.5
–
15
18
12
23
28
–
23
11
–
–
–
* AT designated Advanced Technology ™ compounds for fuel savings.
Please contact your local MICHELIN representative or MRT franchise locations for size and tread design availability.
275/80R24.5
–
15
18
12
23
28
–
23
–
–
11
–
425/65R22.5
–
–
–
–
–
–
–
–
–
20
–
–
445/50R22.5
–
–
–
–
–
–
–
–
–
–
13
16
CASING FITMENT GUIDE
THIS DOCUMENT IS DESIGNED FOR USE AS A SALES TOOL ONLY AND SHOULD NOT BE USED AS OR CONSIDERED TO BE A TECHNICAL RECOMMENDATION.
MRT plant will use the normal MRT production processes, which is to measure the width of the crown and apply the widest tread that will fit to most closely meet the original tire architecture, to determine the final tread size needed for each individual tire. This publication should be used as a general guide during the sales process to help select the MRT tread width that could optimally be used for a particular casing size.
Tread Width
140 150 160 170 180 190 200 210 220 230 240
2 3/152 4/162 5/168 6/177 7/194 8/203 8.5N/211 9/219 9.5/225 10/232 10.5/238
Standard
7.50R16
7.50R17
9R17.5
8R19.5
9R22.5
7.50R16
7.50R17
9R17.5
8R19.5
9R22.5
7.50R16
8.75R16.5
8.75R16.5
8.75R16.5
10R17.5
8.75R16.5
9R17.5
9.50R16.5
9.50R16.5
11R17.5
9.50R16.5
10R17.5
9R17.5
11R17.5
10R17.5
8R19.5
7.50R20
9R22.5
8R19.5
8.25R20
9R22.5
10R22.5
9.50R17.5
9R17.5
10R17.5
11R17.5
8R19.5
7.50R20
10R17.5
11R17.5
8R19.5
9.00R20
10.00R20
9R22.5
9.00R20
10.00R20
10R22.5
11.00R24
12.00R24
10R22.5
8.25R20
9R22.5
10R22.5
10.00R20
10.00R22
10R22.5
11R22.5
12R22.5
13R22.5
11.00R24
12.00R24
11R24.5
12R24.5
10.00R20
11.00R20
10R22.5
11R22.5
12R22.5
13R22.5
11.00R24
12.00R24
11R24.5
12R24.5
10.00R20
10.00R22
11R22.5
12R22.5
11.00R24
12.00R24
11R24.5
12R24.5
12.00R20
11.00R22
11R22.5
12R22.5
11.00R24
12.00R24
11R24.5
12R24.5
11.00R20
12.00R20
11.00R22
11R22.5
12R22.5
12/80R22.5
11.00R24
12.00R24
11R24.5
12R24.5
Low Profile
215/85R16 215/85R16 215/85R16 215/85R16 215/85R16 215/85R16 225/75R16 225/75R16 235/85R16 285/70R19.5 275/80R22.5 275/80R22.5
225/75R16 225/75R16 225/75R16 225/75R16 235/85R16 235/85R16 235/75R17.5 275/80R22.5 275/80R24.5 295/80R22.5
235/85R16 235/85R16 245/75R16
215/75R17.5 245/75R16.5 235/85R16
235/85R16
245/75R16
245/75R16 245/75R16 245/75R17.5 295/80R22.5
215/75R17.5 235/75R17.5 245/70R19.5 275/80R24.5
235/75R17.5 215/75R17.5 245/75R16.5 245/75R16.5 235/75R17.5 245/75R17.5 265/70R19.5
235/75R17.5 215/75R17.5 215/75R17.5 245/75R17.5 225/70R19.5 285/70R19.5
305/70R22.5
315/80R22.5
275/80R24.5
225/70R19.5 235/75R17.5 235/75R17.5 225/70R19.5 245/70R19.5 255/70R22.5
235/80R22.5 225/70R19.5 225/70R19.5 245/70R19.5 265/70R19.5 255/80R22.5
245/70R19.5 245/70R19.5 265/70R19.5 285/70R19.5 275/70R22.5
235/80R22.5 265/70R19.5 235/80R22.5 235/80R22.5 275/80R22.5
255/70R22.5 235/80R22.5 255/70R22.5 255/70R22.5 295/80R22.5
255/70R22.5 255/80R22.5 255/80R22.5 275/80R24.5
255/80R22.5
275/70R22.5
275/80R22.5
275/80R24.5
Tread Width
250 260 270 280 290 320 350 375 380 385 390 395 400
12/252 13 14 15 16.5
18
Standard
13.00R20
14.00R20
12.00R24
15R22.5
16.5R19.5
18R19.5
15R22.5
18R22.5
16.5R22.5
Low Profile
335/80R20 315/80R22.5 315/80R22.5 315/80R22.5 365/80R20 365/80R20 445/65R22.5 445/50R22.5 445/50R22.5 445/50R22.5* 445/50R22.5 445/50R22.5 445/50R22.5
455/55R22.5 455/55R22.5 455/55R22.5 455/55R22.5
365/80R20 305/75R24.5 305/75R24.5
305/70R22.5
315/80R22.5
385/65R22.5 385/65R22.5 445/65R19.5
425/65R22.5 445/50R22.5
425/65R22.5
* Bridgestone ® Greatec ®
75
SCULP SIZE
X ® Coach XZ
X One ® XDA ®
295/80R22.5
445/50R22.5
X One ® XDA ® ENERGY 445/50R22.5
X One
X One
X One
®
®
®
XDA-HT
XDN ®
XTA ®
2
™
445/50R22.5
455/55R22.5
445/50R22.5
445/50R22.5
X One
X One
XD2
XD4
XDA
®
®
®
XDA3
®
®
X One ®
XCA ®
®
XTE
XZU
®
®
XZY ® 3
ENERGY
S
445/50R22.5
455/55R22.5
455/55R22.5
455/55R22.5
7.5R17
285/70R19.5
255/70R22.5
11R22.5
275/80R22.5
275/80R24.5
275/80R22.5
11R22.5
275/80R22.5
XDA ® 5
XDA-HT
XDE
XDE
®
®
™
A/T
M/S
11R24.5
11R22.5
11R22.5
12R22.5
275/80R22.5
11R24.5
11R24.5
275/80R24.5
305/75R24.5
11R22.5
275/80R22.5
275/80R24.5
11R22.5
12R22.5
11R24.5
225/70R19.5
225/70R19.5
245/70R19.5
9R22.5
10R22.5
10R22.5
11R22.5
11R22.5
235/80R22.5
255/80R22.5
275/80R22.5
11R24.5
11R24.5
RECOMMENDED BUFFING SPECIFICATIONS
LR
BUFF
RADIUS mm
(1)
500
1000
550
675
675
675
675
550
600
675
675
675
1000
675
675
675
675
675
675
500
675
675
675
675
675
675
675
675
1700
1700
1700
300
750
850
675
675
675
1700
1700
1700
1700
1700
1700
1700
675
675
675
675
BUFF
WIDTH mm
(2)
225
211
230
230
390
390
390
140
230
230
230
230
390
380
380
380
230
380
380
380
240
230
230
240
230
240
240
252
230
230
194
203
212
168
203
203
230
225
194
194
230
230
230
230
230
230
230
OPT BUFF
WIDTH
225
225
225
177
194
203
152
194
194
225
219
177
177
225
225
225
225
225
225
225
225
225
225
225
225
225
225
250
225
225
225
225
219
203
225
225
H
G
G
G
F
F
G
H
G
H
G
G
H
F
H
H
G
G
J
G
H
G
G
G
H
H
G
G
G
G
H
H
M
D
L
M
G
G
G
G
L
L
L
L
L
L
J
L
SCULP SIZE
XDE
XDE
XDN
XDN
XDS
XDS
XDY
XDY-EX
XFE ®
(Wide Base) (Steer)
XRV
XT-1
XTA
®
®
XDHT
XDL
XDN ®
XDY-2
XTA
XTA
®
®
®
®
®
®
®
®
®
®
®
1
2+
2
™
2
GRIP
2 GRIP
3
™
™
ENERGY
2 ENERGY
315/80R22.5
11R22.5
12R22.5
11R24.5
225/70R19.5
225/70R19.5
245/70R19.5
11R22.5
11R24.5
11R22.5
315/80R22.5
11R24.5
12R24.5
11R22.5
11R24.5
11R24.5
215/75R17.5
265/70R19.5
285/70R19.5
11R22.5
275/80R22.5
11R24.5
275/80R24.5
12.00R24
315/80R22.5
11R22.5
11R22.5
12R22.5
275/80R22.5
11R24.5
11R24.5
275/80R24.5
385/65R22.5
425/65R22.5
445/65R22.5
225/70R19.5
245/70R19.5
235/80R22.5
255/80R22.5
11R22.5
275/80R22.5
11R24.5
275/80R24.5
10.00R15
7.50R15
8.25R15
215/75R17.5
275/80R22.5
245/70R17.5
265/70R19.5
LR
BUFF
RADIUS mm
(1)
675
675
700
675
1000
675
675
675
700
675
675
675
500
500
1000
675
675
675
675
675
700
675
675
675
675
675
675
675
525
550
750
675
450
450
525
675
675
675
675
450
650
500
1400
1400
1000
500
1000
550
600
675
BUFF
WIDTH mm
(2)
230
230
230
225
177
194
225
230
OPT BUFF
WIDTH
225
225
225
219
168
177
219
225
225
225
225
194
203
230
230
230
230
230
194
230
230
230
240
240
240
252
240
230
240
230
177
194
225
225
225
225
225
177
225
225
225
238
225
225
250
225
225
238
225
140
168
225
194
177
225
225
168
140
177
194
225
225
290
320
177
177
230
230
230
152
152
177
230
230
230
230
177
203
194
193
194
203
230
286
318
340
194
H
H
H
H
L
H
H
G
H
H
F
G
H
H
L
H
H
G
G
G
H
H
L
G
G
J
G
G
H
G
F
G
J
G
H
H
J
J
G
J
G
G
G
G
F
G
M
F
L
L
76
(1) Buff radius compliance does not automatically yield correct undertread amounts. Undertread should be controlled and measured.
(2) Buff width and tread base width are not necessarily the same. Tread base width markings in even 10 mm increments will measure the marked width. Tread base width classic markings with die sizes, e.g. 225 \ 9.5 will be slightly narrower then the mm number marked as it is the mold width, not the finished base width.
With tread compound for chip and cut resistance.
RECOMMENDED BUFFING SPECIFICATIONS
XTE
XTE2 ®
XTE2 ® (Wide Base)
XTY
XZ2
XZA
XZA
XZA
XZA
XZE
®
®
®
®
®
®
®
XZA2
XZA2
XZA3
XZA4
®
2
1
SCULP
-1+
-1B
®
®
®
®
Energy
SIZE LR
BUFF
RADIUS (1) mm
550
850
600
675
675
675
675
1000
550
675
675
675
675
675
675
675
675
675
500
500
1000
1000
850
675
700
675
675
675
675
675
675
675
675
675
675
300
700
675
675
675
675
675
1400
1000
850
675
500
750
950
675
675
675
675
750
1400
BUFF
WIDTH mm
(2)
230
219
230
230
230
230
152
240
230
230
230
230
230
225
225
318
340
225
230
168
225
238
230
230
230
230
225
286
194
211
203
230
230
230
230
211
168
203
203
230
230
230
230
230
230
273
194
194
210
210
230
230
230
230
245/70R19.5
9R22.5
10R22.5
10R22.5
11R22.5
11R22.5
12R22.5
235/80R22.5
255/70R22.5
255/80R22.5
275/80R22.5
275/80R22.5
11R24.5
11R24.5
275/80R24.5
275/70R22.5
295/80R22.5
315/80R22.5
11R22.5
11R22.5
275/80R22.5
275/80R22.5
11R24.5
275/80R24.5
G20 (14.00R20) M
225/70R19.5
F
G
G
225/70R19.5
245/70R19.5
245/70R19.5
G
F
G
H
G
H
L
G
J
H
H
G
H
G
G
G
H
G
H
H
F
G
H
F
G
8R19.5
315/80R22.5
11R22.5
275/80R22.5
11R24.5
275/80R24.5
275/80R22.5
11R24.5
275/80R24.5
11R22.5
275/80R22.5
11R24.5
275/80R24.5
11R22.5
275/80R22.5
11R24.5
275/80R24.5
285/70R19.5
385/65R22.5
425/65R22.5
445/65R22.5
275/70R22.5
12R22.5
10R17.5
285/70R19.5
305/70R19.5
G
G
G
G
G
G
G
G
G
G
G
F
L
G
H
J
J
H
L
L
G
G
G
G
J
L
OPT BUFF
WIDTH
225
225
225
225
219
225
225
225
225
225
225
225
211
225
225
225
225
219
219
140
238
225
225
225
225
225
290
320
219
225
152
219
232
177
194
194
225
225
225
225
225
203
152
194
194
225
225
225
177
177
203
203
SCULP SIZE
XZE ® 1 215/75R17.5
11R22.5
11R22.5
XZE2 ™
(North American design)
XZE ® 2
(European design)
275/80R22.5
11R24.5
11R24.5
275/80R24.5
215/75R17.5
9.00R20
10.00R20
11.00R20
XZE ® 2+
12.00R20
265/70R19.5
285/70R19.5
275/70R22.5
295/80R22.5
425/65R22.5
XZL ®
(Wide Base)
XZU ® S
445/65R22.5
315/80R22.5
XZU ® S (Wide Base) 425/65R22.5
XZU
XZU
XZY
XZY
XZY
XZY-2
XZY
®
®
®
®
®
®
2
3
3
3
3
™
(Wide Base)
12R22.5
275/70R22.5
11R22.5
12.00R24
12R22.5
385/65R22.5
425/65R22.5
445/65R22.5
11R22.5
11R24.5
11R22.5
11R22.5
315/80R22.5
11R24.5
11R24.5
LR
BUFF
WIDTH mm
(2)
177
230
230
230
240
230
230
340
230
230
230
225
230
286
318
318
230
225
230
225
318
365
240
230
194
225
225
177
177
219
219
230
230
230
230
BUFF
RADIUS (1) mm
525
675
675
675
700
675
675
1200
675
675
675
1400
675
850
675
675
675
1300
1300
675
550
750
850
675
1300
1200
700
525
600
600
600
675
675
675
675
OPT BUFF
WIDTH
168
225
225
219
290
320
238
225
177
219
219
168
168
216
216
225
225
225
225
290
225
219
220
219
225
225
225
238
225
225
290
320
225
225
G
H
H
L
H
G
L
H
J
L
J
H
J
H
J
L
L
L
H
L
H
J
J
G
H
H
G
G
H
G
G
G
F
G
H
(1) Buff radius compliance does not automatically yield correct undertread amounts. Undertread should be controlled and measured.
(2) Buff width and tread base width are not necessarily the same. Tread base width markings in even 10 mm increments will measure the marked width. Tread base width classic markings with die sizes, e.g. 225 \ 9.5 will be slightly narrower then the mm number marked as it is the mold width, not the finished base width.
With tread compound for chip and cut resistance.
77
X One
®
XDA
®
Pre-Mold
™
Retread
• Unique fuel efficient* compound, to help contribute to greater fuel savings
• Deep tread depth offering long tread life and excellent all-weather traction
• 24 ⁄ 32nds tread depth
RETREAD TREAD DESIGNS
X ONE
®
RETREADS
X One
®
XDA-HT
™
Pre-Mold
™
Retread
• Aggressive lug-type tread design
• Increased traction
• Increased tread wear
• Optimized for Regional and Line Haul operations
• Cool running compound
• Deep 26 ⁄ 32nds tread depth
X One
®
XTA
®
Pre-Mold
™
Retread
• Tread design optimized to promote stability and resistance to uneven wear
• Fuel-efficient* Advanced Technology ™ compound
• Tapered tread extensions to help withstand the stress of long haul trailer use
• Also available as a Custom Mold
• 13 ⁄ 32nds tread depth
™ retread
LH
Width
390 mm
R O/O U
Tread Depth
24 ⁄ 32"
LH
Width
390 mm
400 mm
R O/O U
Tread Depth
26 ⁄ 32"
26 ⁄ 32"
LH
Width
375/425 mm
(1)
R O/O U
Tread Depth
13 ⁄ 32
X One ® XTE ®
Pre-Mold ™ Retread
• Tread design optimized to promote stability and resistance to uneven wear
• Scrub-resistant compound for regional operations
• Tapered tread extensions to help withstand the stress of regional trailer use
• Also available as a Custom Mold
• 16 ⁄ 32nds tread depth
™ retread
X One ® XZU ® S
Pre-Mold ™ Retread
• Co-Ex technology, unique two layer compound designed to minimize casing temperature for longer casing life
• Enhanced protection against stone drilling from variable pitch groove walls and groove bottom protectors in all grooves
• Tread design optimized for all weather traction; 23 ⁄ 32nds tread depth
LH
Width
375/425 mm
(1)
385/435 mm
(1)
R O/O U
Tread Depth
16 ⁄ 32"
16 ⁄ 32"
LH
Width
390/430 mm
(1)
R O/O U
Tread Depth
23 ⁄ 32"
78
* Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
(1) Tread widths with two measurements have wings. The first number is tread base width in mm. The second number is the overall width, wing tip to tip.
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
XDA2 ® 19 and XDA2 ® 23
Pre-Mold ™ Retread
• Fuel-efficient* Advanced Technology ™ compound
• No compromise performance
• Modified tread block design optimized for long, even wear
• XDA2 ®
XDA2 ®
• XDA2 ®
Mold ™
19 - 19 ⁄ 32nds tread depth and
23 - 23 ⁄ 32nds tread depth
23 - also available as a Custom retread
RETREAD TREAD DESIGNS
DRIVE POSITION RETREADS
XDA-HT ™
High Torque
™
Pre-Mold ™ Retread
• Unique two compound design to help deliver long mileage and to help minimize internal casing temperatures
• Solid shoulder design optimized for long, smooth wear
• Open lug design helps provide excellent traction in adverse conditions
• 28 ⁄32nds tread depth
XD4 ®
Pre-Mold ™ Retread
• Extra deep tread design optimized for high torque applications e.g. 4x2’s
• Open shoulder design helps deliver exceptional traction
• Unique scrub resistant compound
• Also available as a Custom Mold ™
• 28 ⁄ 32nds tread depth
LH R O/O U
Width mm\inch
211 \ 8.5
219 \ 9.0
225 \ 9.5
232 \ 10.0
XDA2 19
Tread Depth
—
19 ⁄ 32"
19 ⁄ 32"
—
XDA2 23
Tread Depth
23 ⁄ 32"
23 ⁄ 32"
23 ⁄ 32"
23 ⁄ 32"
XDN ® 2
Pre-Mold ™ Retread
• Exclusive, unique two-layer compound designed to minimize internal casing temperatures for longer tread & casing life
• Outstanding winter and wet traction utilizing Matrix ™ Siping technology
• Wide open shoulder grooves help deliver traction without compromising tread life
• 27 ⁄ 32nds tread depth
LH R O/O U
Width
200 mm
210 mm
220 mm
230 mm
240 mm
250 mm
260 mm
Tread Depth
28 ⁄ 32"
28 ⁄ 32"
28 ⁄ 32"
28 ⁄ 32"
28 ⁄ 32"
28 ⁄ 32"
28 ⁄ 32"
LH R O/O U
Width
210 mm
220 mm
230 mm
Tread Depth
28 ⁄ 32"
28 ⁄ 32"
28 ⁄ 32"
XDN ®
Pre-Mold ™ Retread
• Excellent traction levels in snow and ice conditions
• Sipes and lateral inter-locking grooves for rain and snow evacuation
• Excellent mileage
• Square shoulder for stability
• Also available as a Custom Mold ™
• 17⁄ 32nds or 26⁄ 32nds tread depth, depending on tread width retread
XDHT ®
Pre-Mold ™ Retread
• Solid shoulder design optimized for high scrub applications
• Block design optimized for high torque applications
• Available siped
• Also available as a Custom Mold ™ depending on tread width retread
• 19 ⁄ 32nds or 23 ⁄ 32nds tread depth,
LH R O/O U
Width
220 mm
230 mm
240 mm
Tread Depth
27 ⁄ 32"
27 ⁄ 32"
27 ⁄ 32"
LH R O/O U
Width
210 mm
220 mm
230 mm
250 mm
Tread Depth
26 ⁄ 32"
26 ⁄ 32"
26 ⁄ 32"
26 ⁄ 32"
* Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
LH R O/O U
Width – mm\inch
180 mm
194 \ 7.0
203 \ 8.0
211 \ 8.5
219 \ 9.0
225 \ 9.5
232 \ 10.0
240
Tread Depth
19 ⁄ 32"
23 ⁄ 32"
23 ⁄ 32"
23 ⁄ 32"
23 ⁄ 32"
23 ⁄ 32"
23 ⁄ 32"
23 ⁄ 32"
79
XDA ®
Pre-Mold ™ Retread
• Square shoulder for stability
• Slow, even wear
• Excellent mileage
• 25 ⁄ 32nds tread depth
RETREAD TREAD DESIGNS
DRIVE POSITION RETREADS
XDC ® 18 & XDC ® 22
Pre-Mold ™ Retread
• Open shoulder design optimized for exceptional traction
• Solid center rib promotes long, even wear
• Classic drive axle design helps deliver excellent wear and traction
• XDC
®
18 – 18 ⁄ 32nds tread depth and
XDC
®
22 – 22 ⁄ 32nds tread depth
XDC ® LL
Pre-Mold ™ Retread
• Designed for trade-in vehicles
• Meets truck manufacturers trade-in requirements
• 14 ⁄ 32nds tread depth
LH R O/O U
Width
260 mm
Tread Depth
25 ⁄32"
Width mm\inch
194 \ 7.0
203 \ 8.0
211 \ 8.5
219 \ 9.0
225 \ 9.5
LH R O/O U
XDC 18
Tread Depth
—
—
—
18 ⁄ 32"
18 ⁄ 32"
XDC 22
Tread Depth
22 ⁄ 32"
22 ⁄ 32"
22 ⁄ 32"
22 ⁄ 32"
22 ⁄ 32"
LH R O/O U
Width
210 mm
220 mm
Tread Depth
14 ⁄ 32"
14 ⁄ 32"
XM+S4 ®
Pre-Mold ™ Retread
• Standard highway compound
• Open lug tread design promotes self-cleaning of lugs and helps maximize mud and snow traction
• Chevron block design for high traction and low noise
• 21 ⁄ 32nds tread depth
XDE ® M/S
Pre-Mold ™ Retread
• Open shoulder tread design optimized to help deliver high traction while providing excellent treadwear
• Offset shoulder blocks help provide added traction in mud and soft soil conditions
• 18 ⁄ 32nds, 20 ⁄ 32nds, 22 ⁄ 32nds, or
26 ⁄ 32nds tread depth depending on tread width
XDS ®
Pre-Mold ™ Retread
• Unique MICHELIN
® compounding and tread siping to help deliver outstanding traction in severe snow conditions
• Extensive full-width sipes and lateral grooves for effective rain and snow evacuation
• Directional tread optimized for traction
• Also available as a Custom Mold
™ retread
• 25 ⁄ 32nds tread depth
LH R O/O U
Width mm\inch
168 \ 5.0
177 \ 6.0
194 \ 7.0
203 \ 8.0
Tread Depth
21 ⁄ 32"
21 ⁄ 32"
21 ⁄ 32"
21 ⁄ 32"
Width mm\inch
211 \ 8.5
219 \ 9.0
225 \ 9.5
Tread Depth
21 ⁄ 32"
21 ⁄ 32"
21 ⁄ 32"
LH R O/O U
Width
170 mm
180 mm
190 mm
200 mm
210 mm
Tread Depth
18 ⁄ 32"
18 ⁄ 32"
20 ⁄ 32"
20 ⁄ 32"
20 ⁄ 32"
Width
220 mm
230 mm
240 mm
250 mm
Tread Depth
22 ⁄ 32"
22 ⁄ 32"
26 ⁄ 32"
26 ⁄ 32"
80
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
LH R O/O U
Width
210 mm
220 mm
230 mm
250 mm
Tread Depth
25 ⁄ 32"
25 ⁄ 32"
25 ⁄ 32"
25 ⁄ 32"
XDU ® S
Pre-Mold ™ Retread
• More rubber mass to aid in scrub resistance
• Exclusive, unique two-layer compound designed to minimize internal casing temperatures for long tread & casing life
• Proprietary compound specifically formulated for demanding, high scrub operations
• Lug design optimized for high scrub, high traction operations
• 32 ⁄ 32nds tread depth
RETREAD TREAD DESIGNS
DRIVE POSITION RETREADS
XDY ®
Pre-Mold ™ Retread
• Compound for chip and cut resistance
• Deep tread for traction and mileage
• 26 ⁄ 32nds or 32 ⁄ 32nds tread depth, depending on tread width
XDY-1 ™
Pre-Mold ™ Retread
• Compound for chip and cut resistance
• Directional tread optimized for traction
• Extra deep tread for extra protection and mileage
• 30 ⁄ 32nds tread depth
LH R O/O U
Width
220 mm
230 mm
240 mm
250 mm
270 mm
Tread Depth
32 ⁄ 32"
32 ⁄ 32"
32 ⁄ 32"
32 ⁄ 32"
32 ⁄ 32"
LH R O/O U
Width mm\inch
203 \ 8.0
211 \ 8.5
219 \ 9.0
225 \ 9.5
232 \ 10.0
Tread Depth
26 ⁄ 32"
26 ⁄ 32"
26 ⁄ 32"
26 ⁄ 32"
26 ⁄ 32"
Width mm\inch
238 \ 10.5
240 mm
252 \ 12.0
Tread Depth
26 ⁄ 32"
32 ⁄ 32"
32 ⁄ 32"
LH R O/O U
Width – mm\inch
211 \ 8.5
219 \ 9.0
225 \ 9.5
232 \ 10.0
238 \ 10.5
Tread Depth
30 ⁄ 32"
30 ⁄ 32"
30 ⁄ 32"
30 ⁄ 32"
30 ⁄ 32"
ALL-WHEEL POSITION RETREADS
XZA ®
Pre-Mold ™ Retread
• Solid shoulder to help withstand scrub and abrasion
• Designed for long mileage and even wear
• Available siped
• Also available as a Custom Mold
™ retread
• 13 ⁄ 32nds, 15 ⁄ 32nds or 20 ⁄ 32nds tread depth, depending on tread width
XZE ® SA
Pre-Mold ™ Retread
• Rounded shoulders to help minimize scrub effects typical of spread axle applications
• Tapered tread extensions to help withstand shifting footprint stress typical of spread axle applications while helping to maintain casing durability
• 18 ⁄ 32nds tread depth
XZE ®
Pre-Mold ™ Retread
• Solid shoulders to help withstand scrub and abrasion
• Deep siping for optimized traction
• Deep tread depth designed for long mileage
• Available siped
• Also available as a Custom Mold
™ retread
• 16 ⁄ 32nds or 18 ⁄ 32nds tread depth, depending on tread width
* Tread design below available in the
240 mm - 20⁄32" width only.
LH R O/O U LH R O/O U LH R O/O U
Width
140 mm
150 mm
160 mm
170 mm
180 mm
*240 mm
Tread Depth
13 ⁄ 32"
13 ⁄ 32"
13 ⁄ 32"
13 ⁄ 32"
13 ⁄ 32"
20 ⁄ 32"
Width mm\inch
194 \ 7.0
203 \ 8.0
211 \ 8.5
219 \ 9.0
225 \ 9.5
Tread Depth
15 ⁄ 32"
15 ⁄ 32"
15 ⁄ 32"
15 ⁄ 32"
15 ⁄ 32"
Width
185/225 mm
(1)
195/235 mm
(1)
205/245 mm
(1)
215/255 mm
(1)
225/265 mm
(1)
245/285 mm
(1)
Tread Depth
18 ⁄ 32"
18 ⁄ 32"
18 ⁄ 32"
18 ⁄ 32"
18 ⁄ 32"
18 ⁄ 32"
Width mm\inch
168 \ 5.0
177 \ 6.0
194 \ 7.0
203 \ 8.0
Tread Depth
16 ⁄ 32"
18 ⁄ 32"
18 ⁄ 32"
18 ⁄ 32"
Width mm\inch
211 \ 8.5
219 \ 9.0
225 \ 9.5
(1) Tread widths with two measurements have wings. The first number is tread base width in mm. The second number is the overall width, wing tip to tip.
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
Tread Depth
18 ⁄ 32"
18 ⁄ 32"
18 ⁄ 32"
81
RETREAD TREAD DESIGNS
ALL-WHEEL POSITION RETREADS
XZE2 ™
Pre-Mold ™ Retread
• Good traction
• Compound optimized for regional and over-the-road operations
• Center grooves for good water evacuation
• Performs well in both high scrub and low scrub conditions
• 20 ⁄ 32nds tread depth
XZU ® 2
Pre-Mold ™ Retread
• Unique two compound design to help deliver long mileage and to help minimize internal casing temperatures
• Solid shoulder design optimized for long, smooth wear
• Fuel efficient compound to help contribute to greater fuel savings*
• 24 ⁄ 32nds tread depth
XZU
®
S
Pre-Mold
™
Retread
• More rubber mass to aid in scrub resistance
• Exclusive, unique two-layer compound designed to minimize internal casing temperatures for long tread & casing life
• Proprietary compound specifically formulated for demanding, high scrub operations
• Rib design optimized for high scrub, medium traction operations
• 26 ⁄ 32nds tread depth
LH R O/O U
Width
240 mm
250 mm
260 mm
Tread Depth
20 ⁄ 32"
20 ⁄ 32"
20 ⁄ 32"
LH R O/O U
Width
230 mm
240 mm
250 mm
Tread Depth
24 ⁄ 32"
24 ⁄ 32"
24 ⁄ 32"
XZY ®
Pre-Mold ™ Retread
• Compound for chip and cut resistance
• Rib design optimized for quiet running and even wear
• All wheel position capable
• Shoulder scallops help provide additional traction
• 18 ⁄ 32nds or 20 ⁄ 32nds tread depth depending on tread width
XZY-1
™
Pre-Mold
™
Retread
• Compound for chip and cut resistance
• Square shoulder helps increase ground contact
• All-wheel-position capable
• 20 ⁄ 32nds or 26 ⁄ 32nds tread depth depending on tread width
LH R O/O U
Width
220 mm
230 mm
240 mm
250 mm
270 mm
280 mm
Tread Depth
26 ⁄ 32"
26 ⁄ 32"
26 ⁄ 32"
26 ⁄ 32"
26 ⁄ 32"
26 ⁄ 32"
XZY-2
™
Pre-Mold
™
Retread
• Compound for chip and cut resistance
• Square buttressed shoulder helps provide impact protection from road hazards
• Zig-zag tread grooves and shoulder traction scallops help enhance traction in virtually all weather conditions
• 26 ⁄ 32nds tread depth
LH R O/O U
Width mm\inch
203 \ 8.0
211 \ 8.5
219 \ 9.0
225 \ 9.5
Tread Depth
18 ⁄ 32"
18 ⁄ 32"
18 ⁄ 32"
18 ⁄ 32"
Width mm\inch
232 \ 10.0
238 \ 10.5
250 mm
Tread Depth
18 ⁄ 32"
18 ⁄ 32"
20 ⁄ 32"
LH R O/O U
Width – mm\inch
211 \ 8.5
219 \ 9.0
225 \ 9.5
232 \ 10.0
238 \ 10.5
252 \ 12.0
Tread Depth
20 ⁄ 32"
20 ⁄ 32"
20 ⁄ 32"
20 ⁄ 32"
20 ⁄ 32"
26 ⁄ 32"
82
* Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
LH R O/O U
Width
210 mm
220 mm
230 mm
240 mm
250 mm
Tread Depth
26 ⁄ 32"
26 ⁄ 32"
26 ⁄ 32"
26 ⁄ 32"
26 ⁄ 32"
RETREAD TREAD DESIGNS
TRAILER POSITION RETREADS
XT-1 ® AT
Pre-Mold ™ Retread
• Fuel efficient* Advanced Technology ™ compound
• No compromise performance
• Available siped
• Also available as a Custom Mold
• 12 ⁄ 32nds tread depth
™ retread
XTA ® -1
Pre-Mold ™ Retread
• Solid shoulder to withstand most scrub and abrasion
• No compromise performance
• Available siped
• Also available as a Custom Mold
• 11 ⁄ 32nds tread depth
™ retread
XTA ®
Pre-Mold ™ Retread
• Excellent stability
• Good resistance in high scrub operations
• 16 ⁄ 32nds tread depth
LH R O/O U
Width – mm\inch
203 \ 8.0
211 \ 8.5
219 \ 9.0
225 \ 9.5
Tread Depth
12 ⁄ 32"
12 ⁄ 32"
12 ⁄ 32"
12 ⁄ 32"
XTY ® SA
Pre-Mold ™ Retread
• Application specific compound for chip and cut resistance
• Tapered tread extensions to help withstand shifting footprint stress typical of spread axle and multi-axle applications
• Aggressive tread design for demanding regional and on/off road trailer operations
• 22 ⁄ 32nds tread depth
LH R O/O U
Width – mm\inch
194 \ 7.0
203 \ 8.0
211 \ 8.5
219 \ 9.0
225 \ 9.5
240 \ 10.5
Tread Depth
11 ⁄ 32"
11 ⁄ 32"
11 ⁄ 32"
11 ⁄ 32"
11 ⁄ 32"
11 ⁄ 32"
LH R O/O U
Width
240 mm
260 mm
Tread Depth
16 ⁄ 32"
16 ⁄ 32"
LH R O/O U
Width
195/235 mm
(1)
205/245 mm
(1)
215/255 mm
(1)
Tread Depth
22 ⁄ 32"
22 ⁄ 32"
22 ⁄ 32"
* Fuel savings are estimates based on comparative rolling resistance. Actual on-road savings may vary.
(1) Tread widths with two measurements have wings. The first number is tread base width in mm. The second number is the overall width, wing tip to tip.
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
83
XTE2 ®
WIDE BASE
Pre-Mold ™ Retread
• Wide grooves help provide exceptional water evacuation
• Wide shoulder rib to help resist scrub and abrasion
• Tapered tread extensions to help withstand shifting footprint stress typical of wide base service
• 20 ⁄ 32nds tread depth
RETREAD TREAD DESIGNS
WIDE BASE RETREADS
XZA ®
WIDE BASE
Pre-Mold ™ Retread
• Wide shoulder rib to help withstand scrub and abrasion
• Tapered tread extensions to help withstand shifting footprint stress typical of wide base service
• 19 ⁄ 32nds tread depth
XZH ®
WIDE BASE
Pre-Mold ™ Retread
• Compound for abrasion-resistance
• Self-cleaning lugs, open shoulder design for exceptional traction and excellent floatation
• Tapered tread extensions to help withstand shifting footprint stress typical of wide base service
• 20 ⁄ 32nds tread depth
LH R O/O U
Width
290/345 mm
(1)
Tread Depth
20 ⁄ 32"
LH R O/O U
Width
290/345 mm
(1)
320/365 mm
(1)
350/395 mm
(1)
Tread Depth
19 ⁄ 32"
19 ⁄ 32"
19 ⁄ 32"
LH R O/O U
Width
350/395 mm
(1)
Tread Depth
20 ⁄ 32"
XZL ™
WIDE BASE
Pre-Mold ™ Retread
• Co-Ex technology, unique two-layer compound designed to minimize internal casing temperature for longer tread and casing life
• Wing tread design for added protection on the shoulders for high scrub applications
• 30⁄ 32nds tread depth
XZY ®
WIDE BASE
Pre-Mold ™ Retread
• Compound for abrasion-resistance to promote long casing and tread life
• Tapered tread extensions to help withstand shifting footprint stress typical of wide base service
• 20 ⁄ 32nds tread depth
LH R O/O U
Width
350/395 mm
(1)
Tread Depth
30 ⁄ 32"
LH R O/O U
Width
320/365 mm
(1)
Tread Depth
20 ⁄ 32"
84
(1) Tread widths with two measurements have wings. The first number is tread base width in mm. The second number is the overall width, wing tip to tip.
LH – Long Haul, R – Regional, O/O – On/Off Road, U – Urban
Appendix
85
86
TUBE-TYPE TUBES, FLAPS AND VALVES
A tire cannot perform properly unless it is mounted properly on the correct size wheel. The following are general instructions for demounting and mounting MICHELIN
® tube-type tires. For detailed instructions on mounting and demounting truck tires on particular types of wheels, refer to the instructions of the wheel manufacturer or the RMA
(Rubber Manufacturers Association) wall charts. l7.50R15
8.25R15
10.00R15
9.00R16
7.50R17
335/80R20
275/80R20
365/80R20
15.5/80R20
14.00R20
14.5R20
395/85R20
365/85R20
16.00R20
10.00R20
11.00R20
12.00R20
12.00R24
SIZE
Do not reinflate any tires that have been run underinflated or flat without careful inspection for damage. If run-flat damage is detected, scrap the tire. A tire is considered run-flat if it is found to be less than 80% of normal recommended operating pressure. This can result in serious injury or death.
The tire may be damaged on the inside and can explode during inflation. The wheel parts may be worn, damaged, or dislodged and can explosively separate.
20S
20S
20V
20N
20P
20Q
24Q
TUBE
TUBES AND FLAPS FOR COMMERCIAL TRUCK TIRES
TUBE MSPN FLAP
15/16J
15/16J
15P
73993
73993
04560
15x6.00
15x6.00
15x7.50
16N
17K
20P
20P
20Q
20S
20S
20S
17786
26362
06934
06934
39144
32420
32420
32420
16x6.00D
17X6.00D
20x10.00
20x10.00
20x10.00
20x10.00
20x10.00
20x10.00
32420
32420
32961
17078
06934
39144
11708
20x10.00
20x10.00
20x10.00
20x7.50
20x8.50
20x8.50
24/25x8.50
FLAP MSPN
62152
62152
58753
94605
45608
47501
47501
47501
47501
47501
47501
47501
47501
47501
44274
49781
49781
48842
Product
T igre grease
MOUNTING LUBRICANT
Size
4 Kg
Product code
25817
SELECTION OF PROPER COMPONENTS
AND MATERIALS
a. All tires must be mounted with the proper
MICHELIN ® tube and flap (if required) and wheel
as indicated in the specification tables on
Page 84.
Rim
Nylon Plate
Flap
Valve
b. Make certain that wheel components are properly
matched and of the correct dimensions for the tire.
c. Always fit a new MICHELIN
® tube in a new
mounting. Since a tube will exhibit growth in size through normal use, an old tube used in a new mounting increases the possibility of tube creasing and chafing, possibly resulting in failure.
Tube
f. Always use a safety device such as an inflation cage or other restraining device that will constrain all wheel components during an explosive separation of a multipiece wheel, or during the sudden release of the contained air of a single piece wheel that is in compliance with OSHA (Occupational Safety and
Health Administration) standards. Do not bolt restraining device to the floor. Never stand over a tire or in front of a tire when inflating. Always use a clip-on valve chuck with an in-line valve with a pressure gauge or a presettable regulator. Additionally, ensure there is a sufficient length of hose between the clip-on chuck and the in line valve (if one is used) to allow the service technician to stand outside the trajectory path when inflating. Trajectory zone means any potential path or route that a wheel component may travel during an explosive separation, or the sudden release of the pressurized air, or an area at which an blast from a single piece wheel may be released.
The trajectory may deviate from paths that are perpendicular to the assembled position of the wheel at the time of separation or explosion.
Pinched tube
d. Always install a new flap in a new mounting. A flap, through extended use, becomes hard and brittle.
After a limited time, it will develop a set to match the tire and wheel in which it is fitted. Therefore, it will not exactly match a new tire and wheel combination.
e. Always install new valve cores and metal valve caps
containing plastic or rubber seals. For tires requiring
O-rings, be sure to properly install a new silicone
O-ring at every tire change.
NEVER WELD OR APPLY HEAT TO A WHEEL ON
WHICH A TIRE IS MOUNTED.
87
88
GENERAL INFORMATION
UNITS OF MEASUREMENT
Quantity S.I. Units Other Units
Length m
(meter)
1 inch (") = 0.0254 m or 25.4 mm
1 mile = 1609 m (1.609 km)
1 kilometer = 0.621 mile
Mass kg
(Kilogram)
1 pound (lb) = 0.4536 kg
1 kilogram (kg) = 2.205 lbs.
Pressure kPa
(Pascal)
1 bar* = 100 kPa
1 psi = 6.895 kPa
1 pound per square inch
1 kg/cm2 - 98.066 kPa
Speed m/s
(meter per second)
1 kilometer per hour (kph)* =
0.27778 m/s
1 mile per hour (mph) =
0.4470 m/s (or 1.60935 kph)
* Non S.I. unit to be retained for use in specialized fields.
PRESSURE UNIT CONVERSION TABLE
3.5
4.0
4.5
5.0
5.5
6.0
bar
1.0
1.5
2.0
2.5
3.0
6.5
7.0
7.5
8.0
8.5
9.0
9.5
10.0
10.5
350
400
450
500
550
600
kPa
100
150
200
250
300
650
700
750
800
850
900
950
1000
1050
73
80
87
51
58
65
lb/in 2 *
15
22
29
36
44
94
102
109
116
123
131
138
145
152
3.6
4.1
4.6
5.1
5.6
6.1
kg/cm 2 *
1.0
1.5
2.0
2.5
3.1
6.6
7.1
7.7
8.2
8.7
9.2
9.7
10.2
10.7
SPEED SYMBOL
The ISO* SPEED SYMBOL indicates the speed at which the tire can carry a load corresponding to its Load Index under service conditions specified by the tire manufacturer.**
Speed
Speed Symbol
C
D
E
F
G
A7
A8
B
A1
A2
A3
A4
A5
A6
J
K
L
M
N
60
65
70
80
90
35
40
50
(kph)
5
10
15
20
25
30
100
110
120
130
140
22.5
25
30
35
40
43
50
56
mph
2.5
5
10
12.5
15
20
62
68
75
81
87
* International Standardization Organization
** Exceeding the legal speed limit is neither recommended nor endorsed.
LOAD RANGE/PLY RATING
B – 4
C – 6
D – 8
E – 10
F – 12
G – 14
H – 16
J – 18
L – 20
M – 22
LOAD INDEX
The ISO LOAD INDEX is a numerical code associated with the maximum load a tire can carry at the speed indicated by its SPEED* SYMBOL under service conditions specified by the tire manufacturer. (1 kg = 2.205 lbs.)
1,650
1,700
1,750
1,800
1,850
1,900
1,950
2,000
2,060
1,400
1,450
1,500
1,550
1,600
1,215
1,250
1,285
1,320
1,360
1,000
1,030
1,060
1,090
1,120
1,150
1,180
875
900
925
950
975
kg
800
825
850
9,650
9,920
10,200
10,500
10,700
11,000
11,400
11,700
12,000
8,270
8,540
8,820
9,090
9,370
7,160
7,390
7,610
7,830
8,050
5,840
6,005
6,175
6,395
6,610
6,780
6,940
lbs
4,675
4,805
4,940
5,070
5,205
5,355
5,510
5,675
4,375
4,500
4,625
4,750
4,875
5,000
5,150
5,300
5,450
3,750
3,875
4,000
4,125
4,250
3,250
3,350
3,450
3,550
3,650
2,650
2,725
2,800
2,900
3,000
3,075
3,150
kg
2,120
2,180
2,240
2,300
2,360
2,430
2,500
2,575
3,640
3,750
3,860
3,970
4,080
4,190
4,300
4,410
4,540
3,085
3,195
3,305
3,415
3,525
2,680
2,755
2,835
2,910
3,000
2,205
2,270
2,335
2,405
2470
2,535
2,600
lbs
1,765
1,820
1,875
1,930
1,985
2,040
2,095
2,150
125
126
127
128
129
130
131
132
133
120
121
122
123
124
115
116
117
118
119
108
109
110
111
112
113
114
Load Index
100
101
102
103
104
105
106
107
159
160
161
162
163
164
165
166
167
154
155
156
157
158
149
150
151
152
153
142
143
144
145
146
147
148
Load Index
134
135
136
137
138
139
140
141
25,360
26,020
26,800
27,565
28,355
29,110
30,000
30,870
31,980
19,295
19,845
20,400
21,000
21,500
22,050
22,720
23,400
24,040
24,700
15,700
16,100
16,500
17,100
17,600
18,195
18,745
lbs
12,300
12,800
13,200
13,600
13,900
14,300
14,800
15,200
11,500
11,800
12,150
12,500
12,850
13,200
13,600
14,000
14,500
8,750
9,000
9,250
9,500
9,750
10,000
10,300
10,600
10,900
11,200
7,100
7,300
7,500
7,750
8,000
8,250
8,500
kg
5,600
5,800
6,000
6,150
6,300
6,500
6,700
6,900
193
194
195
196
197
198
199
200
201
188
189
190
191
192
183
184
185
186
187
176
177
178
179
180
181
182
Load Index
168
169
170
171
172
173
174
175
89
90
STATIC AND LOW SPEED LOAD AND PRESSURE COEFFICIENTS
STATIC AND LOW SPEED LOAD AND PRESSURE COEFFICIENTS
Do not exceed loads or pressure limits of the wheel without permission of the component manufacturer. Exceeding the legal speed limit is neither recommended nor endorsed.
TRA (THE TIRE AND RIM ASSOCIATION, INC.) STANDARDS
(These Tables apply to tires only. Consult wheel manufacturer for wheel load and inflation capacities.)
Load limits at various speeds for radial ply truck-bus tires used on improved surfaces.
(1)
A. METRIC AND WIDE BASE TIRES
The service load and minimum (cold) inflation must comply with the following limitations unless a speed restriction is indicated on the tire.*
B. CONVENTIONAL TIRES
The service load and minimum (cold) inflation must comply with the following limitations unless a speed restriction is indicated on the tire.*
Speed Range
(mph)
41 thru 50
31 thru 40
21 thru 30
11 thru 20
6 thru 10
2.6 thru 5
Creep thru 2.5
Creep
(2)
Stationary
% Load Change
+7%
+9%
+12%
+17%
+25%
+45%
+55%
+75%
+105%
Inflation
Pressure Change
No increase
No increase
+10 psi
+15 psi
+20 psi
+20 psi
+20 psi
+30 psi
+30 psi
Note: For bias ply tires please consult the TRA Year Book.
Speed Range
(mph)
41 thru 50
31 thru 40
21 thru 30
11 thru 20
6 thru 10 (2)
2.6 thru 5 (2)
Creep thru 2.5
(2)
Creep
(2) (3)
Stationary (2)
% Load Change
+9%
+16%
+24%
+32%
+60%
+85%
+115%
+140%
+185%
Inflation
Pressure Change
No increase
No increase
+10 psi
+15 psi
+30 psi
+30 psi
+30 psi
+40 psi
+40 psi
Load limits at various speeds for radial ply truck-bus tires, rated at 75 mph or above, used on improved surfaces.
(1)
C. METRIC AND WIDE BASE TIRES D. CONVENTIONAL TIRES
Speed Range
(mph)
41 thru 50
31 thru 40
21 thru 30
11 thru 20
6 thru 10
2.6 thru 5
Creep thru 2.5
Creep (2)
Stationary
% Load Change
+7%
+9%
+12%
+17%
+25%
+45%
+55%
+75%
+105%
Inflation
Pressure Change
No increase
No increase
+10 psi
+15 psi
+20 psi
+20 psi
+20 psi
+30 psi
+30 psi
Speed Range
(mph)
41 thru 50
31 thru 40
21 thru 30
11 thru 20
6 thru 10 (3)
2.6 thru 5 (3)
Creep thru 2.5 (3)
Creep (2)(3)
Stationary (3)
% Load Change
+9%
+16%
+24%
+32%
+60%
+85%
+115%
+140%
+185%
Inflation
Pressure Change
No increase
No increase
+10 psi
+15 psi
+30 psi
+30 psi
+30 psi
+40 psi
+40 psi
(1) These load and inflation changes are only required when exceeding the tire manufacturer’s rated speed for the tire.
(2) Apply these increases to Dual Loads and Inflation Pressures.
(3) Creep – Motion for not over 200 feet in a 30-minute period.
Note 1:
The inflation pressures shown in the referenced tables are minimum cold pressures for the various loads listed.
Higher pressures should be used as follows:
A. When required by the above speed/load table.
B. When higher pressures are desirable to obtain improved operating performance.
For speeds above 20 mph, the combined increases of A and B should not exceed 20 psi above the inflation specified for the
Note 2:
maximum load of the tire.
Load limits at various speeds for:
Tires used in highway service at restricted speed.
Mining and logging tires used in intermittent highway service
*Exceeding the legal speed limit is neither recommended or endorsed.
PROPER APPLICATION OF ON/OFF ROAD (Y AND L) TIRES*
The tires with “Y” or “L” (see Page 25) as the third character in the tread designations are designed and optimized for on/off road applications and are speed restricted. These tires should not be used in applications that operate the tires continuously on highway over an extended period of time or at speeds that exceed the speed rating of the tire. This could lead to heat build up and cause premature or sudden tire failure.
Tires with the “Y” designation are for applications expected to be 80% On-road use and 20% Off-road use.
They have a maximum speed of 65 mph.
Tires with the “L” designation are for applications expected to be 20% On-road use and 80% Off-road use.
Some of the “L” designated tires have a maximum speed of 50 mph while others have maximum speeds of 55, 60 and of 70 mph.
The Tire and Rim Association (TRA) permits operating a 65 mph rated tire at higher speeds with a reduced load and increased inflation. No such permission is granted by TRA for tires with speed rating rated below 65 mph.
Always refer to this MICHELIN Truck Tire Data Book on Page 25 and match the tire to the application when making tire selections.
COLD CLIMATE PRESSURE CORRECTION DATA
Because the pressure inside a tire will decrease when the vehicle is taken from a warm environment to a cold one, some adjustments may be necessary when adjusting the tire pressures of a vehicle to be operated in very cold temperatures.
These adjustments are only necessary if the pressures are verified and adjusted inside a heated garage with an air supply that is also at the higher room temperature.
(No adjustment necessary if done outside.)
In extreme cases, the following table should be used to ensure that the operating pressure and deflection of tires are adequate at the outside ambient temperature.
Using the load and pressure charts below, determine the appropriate “Recommended Pressure” required for the axle load. Then find the same pressure down the left column of the table to the right. Going across to the relevant outside ambient temperature you will find the corrected inflation pressure to be used.
For example:
• A log truck in Alaska has a front axle loaded weight of
12,000 lbs.
• The truck is equipped with 11R24.5 MICHELIN ®
XZY
®
3 tires.
• The recommended pressure for this fitment is 105.
• The truck is parked overnight in a heated garage.
• The outside high forecasted for today is -20ºF.
• The tire pressures are checked and adjusted prior to leaving the heated garage.
According the chart below, the tires should be adjusted to 128.
Adjusted Inflation Pressure (psi)
(when inflating indoors at 65°F [18°C])
Recommended
Pressure
(psi)
95
100
105
110
75
80
85
90
115
120
125
130
119
124
129
134
98
103
109
114
F° 50°
C° 10°
78
83
88
93
127
133
138
144
105
111
116
122
20°
-7°
83
89
94
100
124
130
135
140
103
108
114
119
30°
-1°
81
87
92
98
122
127
132
137
101
106
111
116
40°
4°
80
85
90
95
130
136
141
147
108
113
119
125
Outside Ambient Temperature
10° 0° -10°
-12° -18° -23°
86
91
97
102
88
93
99
105
90
96
102
108
111
116
122
128
133
139
145
150
137
143
148
154
113
119
125
131
140
146
152
158
116
122
128
134
-20°
-29°
92
98
104
110
148
154
160
166
123
129
135
141
-40°
-40°
98
104
110
116
144
150
156
162
119
125
132
138
-30°
-34°
95
101
107
113
151
158
164
171
126
132
139
145
-50°
-46°
100
107
113
119
91
92
CHANGES IN TOP SPEED
WHEN TIRE REVOLUTIONS PER MILE CHANGES
GEAR RATIO
A change in tire dimension will result in a change in engine RPM at a set cruise speed* that will result in a change in speed and fuel economy. The effect of tire size change on gear ratio should be considered in individual operations.
A decrease in tire radius will increase tractive torque and increase indicated top speed. An increase in tire radius will reduce tractive torque and decrease indicated speed.
Tire Revs./Mile – Speed – Size: These factors can affect engine RPM if corresponding changes are not made to engine ratios.
Example: Going from larger diameter tire to smaller diameter tire.
If you currently run a 275/80R22.5 MICHELIN XDN ® 2 tire (511 Tire Revs./Mile) and change to a 445/50R22.5 MICHELIN X One ® XDN ® 2 tire (515 Tire Revs./Mile), the speedometer will indicate a slightly higher speed than the actual speed the vehicle is traveling.
Final Tire Revs./Mile – Initial Tire Revs./Mile =
Initial Tire Revs./Mile
515 - 511 = 0.0078 or .78% (< 1% change)
511
So when your actual speed is 60 mph, your speedometer will read 60.47 mph.
MICHELIN X One Tire Size
445/50R22.5
Dual Size
275/80R22.5
MICHELIN X One Tire
Tire Revs./Mile
515 (X One XDN2)
Dual Tire Revs./Mile
511 (XDN2)
MICHELIN X One Tire Size
455/55R22.5
Dual Size
11R22.5 or 275/80R24.5
MICHELIN X One Tire
Tire Revs./Mile
492 (X One XDN2)
Dual Tire Revs./Mile
496 (XDN2)
Rule of Thumb: When going from a lower Tire Revs./Mile to a higher Tire Revs./Mile, the actual vehicle speed is less than the speedometer reading. When going from a higher Tire Revs./Mile to a lower Tire Revs./Mile, the actual vehicle speed is greater than the speedometer reading.
* Exceeding the legal speed limit is neither recommended nor endorsed.
To determine the proper load/inflation table, always comply with to the markings on the tire sidewall for maximum load at cold pressure.
Load and inflation industry standards are in a constant state of change. Michelin continually updates its product information to reflect these changes.
Therefore, printed material may not reflect the current load and inflation information.
NOTE: Never exceed the wheel manufacturer’s maximum pressure limitation.
S = Single configuration – 2 tires per axle. D = Dual configuration – 4 tires per axle. Loads are indicated per axle.
LOAD / INFLATION TABLE FOR MICHELIN 315/80R22.5 LRL
The following table applies to LRL use with 8.25x22.5 Wheels.
8.25" Wheel –
Michelin recommendation (loads per axle): Minimum dual spacing 13.5" (343 mm)
Dimension
315/80R22.5
8.25" Wheel
Load
Range
L
PSI kPa
lbs. per axle kg. per axle
75
520
80
550
85
590
90
620
95
660
100
690
105
720
110
760
115
790
120*
830
S
D
S 10990 11570 12140 12710 13280 13820 14380 14920 15460 16000
D 20900 22000 23100 24180 25260 26300 27360 28400 29440 30440
4980
9480
5250
9980
5510
10480
5770
10970
6020
11460
6270
11930
6520
12410
6770
12880
7010
13350
7260
13810
Note: Never exceed the wheel manufacturer's maximum cold pressure limitation and/or load rating.
* When used on an 8.25” wheel, the max load and pressure is lower than that indicated on the sidewall.
TECHNICAL SPECIFICATIONS FOR MICHELIN 455/55R22.5 LRM
ON 13.00x22.5 WHEELS STEER AXLE, FIRST LIFE ONLY
Dimension
Load
Range
455/55R22.5
LRM
Loaded Radius in.
19.5
mm.
496
Max. Load Single*
RPM lbs.
psi
493 10000 120
kg.
4535
kPa
830
Dimension
455/55R22.5
13.00" Wheel
Load
Range
LRM
psi 75 80 85 90 95 100 105 110 115 120 kPa 520 550 590 620 660 690 720 760 790 830
lbs. per axle 13740 14460 15180 15880 16600 17280 17980 18660 19340 20000 kg. per axle 6240 6520 6900 7180 7560 7820 8100 8460 8720 9070
* Note: When used on a 13.00" wheel the max load and pressure is lower than that indicated on the sidewall.
93
FRONT AXLE OVERLOAD ON AUTO HAULERS
Recent studies by Michelin’s Customer Engineering Support have shown that Auto Haulers may sometimes exceed the designed load capacity of the front axle tires either across the axle or at one of the two axle ends. Improper positioning of the top front loaded vehicle or positioning of heavier than intended vehicles in the top front position contribute to overload conditions.
275/70R22.5 LRJ
MICHELIN ® 275/70R22.5 XZE ® 2+ and MICHELIN ® XZA2 ® Energy LRJ truck tires have a maximum single tire load of 6,940 lbs at 130 psi with a maximum speed rating of 75 mph
(1)
. See Load and Inflation table below.
(3)
Overloading the 275/70R22.5 LRJ tires (or any highway tire) and/or exceeding the speed rating of the tire is dangerous and may lead to tire failure.
Specifications for 275/70R22.5 MICHELIN
®
XZE
®
2+ and MICHELIN
®
XZA2
®
ENERGY LRJ
(3)
Size
Load
Range
Catalog
Number
Tread
Depth
Max.
Speed
(1)
32nds mph
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall Width
(2)
in.
mm
Approved
Wheels
(Measuring wheel listed first.)
Min. Dual
Spacing (2)
in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
kPa
275/70R22.5
XZE2+
275/70R22.5
XZA2 ENERGY
J
78395 19
75
17.6
448 38.0
966 10.9
276 7.50, 8.25 11.9
303 545 6940 130 3150 900
J
90059 18
75
17.6
448 38.0
966 10.9
277 7.50, 8.25
11.9
303 545 6940 130 3150 900
Load and Inflation Table for 275/70R22.5 MICHELIN
®
XZE
®
2+ and MICHELIN
®
XZA2
®
ENERGY LRJ
7.50", 8.25" Wheel,
Max Speed 75 mph
(1)
PSI kPa
85
590
90
620
95
660
100
690
105
720
110
760
115
790
120
830
125
860
130
900
MAXIMUM LOAD AND
PRESSURE ON SIDEWALL
13460
275/70R22.5 LRJ
XZE2+,
XZA2 ENERGY
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
9880
19420
4480
8810
10340 10800 11250 11700 12140
20320 21220 22100 22980 23860
4690 4900 5100 5310 5510
9220 9630 10020 10420 10820
12580 13020
24720 25580
5710 5900
11210 11600
6080
13880 S 6940 LBS AT 130 PSI
6300
D 6395 LBS AT 120 PSI
S 3150 KG AT 900 kPa
D 2900 KG AT 830 kPa
(3)
If an Auto Hauler cannot ensure that the front axle ends were loaded within the limit of the 275/70R22.5 LRJ, the tires should be assumed to have been overloaded, and must be removed and scrapped.
295/60R22.5 LRJ
The recommended alternative fitment for the 275/70R22.5 LRJ is the 295/60R22.5 MICHELIN
®
XZA2
®
Energy LRJ tire MSPN 33215.
Specifications for 295/60R22.5 MICHELIN
®
XZA2
®
ENERGY
Size
295/60R22.5
XZA2 ENERGY
Load
Range
J
Catalog
Number
Tread
Depth
Max.
Speed
(1)
32nds mph
33215 16
65
(5)
Loaded
Radius in.
mm
Overall
Diameter in.
mm
Overall
Width (2)
in.
mm
16.7
424 36.1
918 11.4
290
Approved
Wheels
(Measuring wheel listed first.)
9.00
(4)
Min. Dual
Spacing (2)
in mm
Revs
Per
Mile
Max. Load and Pressure
Single lbs.
psi kg.
kPa
13.0
329 575 7390 130 3350 900
94
(1) Exceeding the legal speed limit is neither recommended nor endorsed.
(2) Overall widths will change 0.1 inch (2.5 mm) for each 1/4 inch change in wheel width. Minimum dual spacing should be adjusted accordingly.
(3) If used on wheels with 120 psi cold ratings the maximum load/tire in single mount is limited to 6,510 lb/tire.
(4) See Page 93 for use on 8.25 x 22.5" wheel.
(5) See Page 93 for use at 75 mph maximum speed.
295/60R22.5 MICHELIN
®
XZA2 ENERGY LRJ AND
295/60R22.5 MICHELIN
®
X MULTIWAY XD LRJ,
ADJUSTED LOAD AND PRESSURE TABLES
FOR USE ON 8.25” WHEEL, OR AT 75 MPH
(1)
295/60R22.5 LRJ – 9.00" Wheel, Max Speed 65 mph
(1)
The 295/60R22.5 MICHELIN ® XZA2 ® Energy and MICHELIN ® X MultiWay XD LRJ are designed to be used on a 9.00 x 22.5" wheel and at a maximum speed of 65 mph.
(1)
(Note that the maximum load and pressure under these conditions match those indicated on the sidewall.)
9.00" Wheel,
Max Speed 65 mph
(1)
295/60R22.5 LRJ
XZA2 ENERGY,
X MULTIWAY XD
PSI kPa
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
85
590
10520
19300
4770
8750
90
620
11010
20200
4990
9160
95
660
11500
21100
5220
9570
100
690
11980
21980
5430
9970
105
720
12460
22860
5650
10370
110
760
12930
23720
5860
10760
115
790
13400
24580
6080
11150
120
830
13860
25440
6290
11540
125
860
14320
26280
6460
11880
DESIGN
MAXIMUM LOAD
AND PRESSURE
PER AXLE
DESIGN
MAXIMUM LOAD
AND PRESSURE
PER TIRE
130 130
900
14780
27120
6700
12300
900
7390
6780
3350
3075
295/60R22.5 LRJ – 9.00" Wheel, Max Speed 75 mph
(1)
The maximum speed of the 295/60R22.5 MICHELIN ® XZA2 ® Energy LRJ and MICHELIN ®
X MultiWay XD LRJ on a 9.00 x 22.5" wheel may be increased to 75 mph (1) by applying the following reduced load and pressure table.
(Note that the maximum load under these conditions is less than that indicated on the sidewall.)
9.00" Wheel,
Max Speed 75 mph
(1)
295/60R22.5 LRJ
XZA2 ENERGY,
X MULTIWAY XD
PSI kPa
LBS SINGLE
LBS DUAL
KG SINGLE
KG DUAL
90
620
10520
19300
4770
8750
95
660
11010
20200
4990
9160
100
690
11500
21100
5220
9570
105
720
11980
21980
5430
9970
110
760
12460
22860
5650
10370
115
790
12930
23720
5860
10760
120
830
13400
24580
6080
11150
125
860
13860
25440
6290
11540
ADJUSTED
MAXIMUM LOAD
AND PRESSURE
PER AXLE
130
ADJUSTED
MAXIMUM LOAD
AND PRESSURE
PER TIRE
130
900
14320
26280
6460
11880
900
7160
6570
3230
2970
295/60R22.5 LRJ – 8.25" Wheel, Max Speed 75 mph
(1)
In addition to running at 75 mph (1) , the 295/60R22.5 MICHELIN ® XZA2 ® Energy LRJ and
MICHELIN
®
X MultiWay XD LRJ may be mounted on an 8.25 x 22.5" wheel by applying the following further reduced load and pressure table.
(Note that the maximum load and pressure under these conditions are less than that indicated on the sidewall.)
8.25" Wheel
Max Speed 75 mph
(1)
295/60R22.5 LRJ
XZA2 ENERGY,
X MULTIWAY XD
PSI 70 75 80 85 90 95 100 105 110 115 kPa 480 520 550 590 620 660 690 720 760 790
LBS SINGLE 8600
LBS DUAL 16160
9030
16980
9350
17640
9850
17920
10250
18660
10710
19760
11040
20100
11420
20780
11680
21420
12170
22140
KG SINGLE
KG DUAL
3900
7320
4100
7720
4240
8000
4460
8120
4660
8480
4860
8960
5000
9120
5180
9440
5300
9720
5520
10040
ADJUSTED
MAXIMUM LOAD
AND PRESSURE
PER AXLE
120
ADJUSTED
MAXIMUM LOAD
AND PRESSURE
PER TIRE
120
830
12350
22700
5600
10300
830
6175
5675
2800
2575
(1) Exceeding the legal speed limit is neither recommended nor endorsed.
Load and inflation industry standards are in a constant state of change. Michelin continually updates its product information to reflect these changes. Therefore, printed material may not reflect the current load and inflation information.
NOTE: The actual load and inflation pressure used must not exceed the wheel manufacturer's maximum conditions.
Never exceed a wheel manufacturer's limits without permission of the component manufacturer.
Single configuration = 2 tires per axle. Dual configuration = 4 tires per axle.
Loads are indicated per axle.
Always refer to the MICHELIN
®
Truck Tire Data Book (MWL40731) and MICHELIN
®
Truck Tire Service Manual (MWL40732) for proper tire selection, inflation and maintenance.
95
96
BALANCE AND RUNOUT
Current Technology & Maintenance Council (TMC) limits from TMC RP 214C, Tire/Wheel End Balance and Runout, are listed in the tables below.
TABLE A:
RECOMMENDED BALANCE AND RUNOUT VALUES FOR DISC WHEELS AND DEMOUNTABLE RIMS
Tubeless Steel Disc Wheels
Balance
(See Note 2)
6 oz. max
Radial Runout
(See Note 3)
0.070 inch max
Lateral Runout
(See Note 3)
0.070 inch max
Tubeless Aluminum Disc Wheels
Tubeless Demountable Rims
Wide Base Wheels
Steel
Aluminum
4 oz. max
N/A
See Note 1
See Note 1
0.030 inch max
0.070 inch max
0.075 inch max
0.030 inch max
0.030 inch max
0.070 inch max
0.075 inch max
0.030 inch max
Note 1: Refer to the manufacturer’s specifications for balance and runout values.
Note 2: Amount of weight applied to wheel to balance individual wheel component.
Note 3: For steel wheels, the area adjacent to the rim butt weld is not considered in runout measurements.
TABLE B:
TIRE/WHEEL ASSEMBLY BALANCE AND RUNOUT LIMITS
Tire Position
Steer
19.5
Tire/Wheel
14 oz.
Maximum total weight correction expressed in ounces of weight required to correct at wheel diameter per rotating assembly
Drive/Trailer 18 oz.
Steer 0.095"
Lateral runout for rotating assembly
Radial runout for rotating assembly
Drive/Trailer
Steer
Drive/Trailer
0.125"
0.095"
0.125"
Over The Road
Applications
16 oz.
20 oz.
0.095"
0.125"
0.095"
0.125"
On/Off-Road
Applications
18 oz.
22 oz.
0.110"
0.125"
0.110"
0.125"
Wide Base
Tire/Wheel
24 oz.
28 oz.
0.125"
0.125"
0.125"
0.125"
Note: If tire and wheel assembly is within these limits and ride problem still exists, refer to TMC RP 648, Troubleshooting
Ride Complaints.
TRUCK TIRE BRANDING
1.
The following limits apply when branding MICHELIN ® truck tires using equipment without accurate temperature control or which may exceed 465 degrees fahrenheit (240°C). (Hand held equipment is typically
used for this “HOT BRANDING.”)
a. Brand Temperature
570°F (300°C)
480°F (250°C)
Maximum Depth
1⁄ 64 inch (0.4 mm)
1⁄ 32 inch (0.8 mm) b. Only brand in the “BRAND TIRE HERE” area.
2.
For equipment capable of “COLD BRANDING” i.e. controlled temperatures below 465°F (240°C), the following restrictions apply: a. Temperature b. Contact pressure c. Time of contact d. Character Height e. Character Depth f. Location:
Circumferentially
Radially
—
—
Maximum 465°F (240°C)
Maximum 100 psi
Maximum 1 Minute
Maximum 1 Inch
Maximum 0.040 Inch (1.0 mm) in the “BRAND TIRE HERE” area, or centered above it.
in the “BRAND TIRE HERE” area with no portion of any character extending more than 1” above the outline of the area.
TREAD DEPTH MEASUREMENT ON TIRES RETREADED
WITH THE MRT XDU
®
S PRE-MOLD
™
RETREAD
The MRT XDU ® S Pre-Mold ™ Retread has a lug design optimized for high scrub, high traction operations as well as 32 ⁄ 32nds original tread depth. The tread design incorporates bridges between the lugs in order to stabilize the lugs. See photo below.
Care must be taken when taking tread depth measurements in order to get an accurate determination of the remaining tread depth.
Do not take measurements on top of the bridges! This will give a false reading and may lead to the tire being pulled from service earlier than necessary. There may be as much as 4 ⁄ 32nds difference in the measurements taken on top of the bridge as opposed to taking it at the bottom of the groove.
Bridges
FMVSS -119 Section (c) and The Federal Motor
Carrier Safety Regulation Part 393.75 state that
(non – steer axle) “tires shall have a tread groove pattern depth of at least 2 ⁄ 32nds of an inch when measured in a major tread groove.
The measurement shall not be made where tie bars, humps or fillets are located.”
97
98
PROPER APPLICATION OF URBAN (“U”) TIRES
The tires with the “U” designation are designed and optimized for urban applications and should not be used in nonurban applications including but not limited to, long haul and RV/motorhomes/coaches. These aforementioned applications may subject the tires to continuous use over an extended period of time. This could lead to heat build up and may cause the tire to fail prematurely and/or suddenly. See information below.
ALWAYS REFER TO THE MICHELIN ® DATA BOOK AND MATCH THE TIRE TO THE APPLICATION WHEN MAKING TIRE
SELECTIONS.
TREAD PATTERN DESIGNATIONS
Tire manufacturers will use specific numbers or letters to identify different types of tread patterns or casing construction.
Michelin uses letters to denote specific qualities and/or applications for its tires.
TIRE APPLICATIONS
The specific tread design used should only be considered after the vehicle type and user vocation has been examined.
There are several categories of tire service applications:
X Z
MICHELIN ®
Radial
Position
U
Application
2
Index
(Used to denote product evolution)
HIGHWAY
REGIONAL
A Heavy loads and high speeds for extended periods of time. Primarily interstate or divided highway.
E
Medium to heavy loads, frequently on 2-lane roads. Vehicles generally return to home base at night.
URBAN
U
Stop-and-go delivery ... service within a limited radius – metro and suburban.
ON/OFF ROAD
Y
Heavy loads and slower speeds, operating on a mixture of improved secondary and aggressive road surfaces.
OFF ROAD
L
Very heavy loads normally on poor or unimproved surfaces.
REGROOVING THE MICHELIN
®
XZU
®
2 TIRE
Only MICHELIN ® truck tires that are marked
“REGROOVABLE” on the sidewall may be regrooved.
After regrooving, you must have at least 3 ⁄ 32nds of under tread covering the top ply. If steel is exposed, the tire must be scrapped or retreaded. In addition, some tread designs will have a regrooving depth indicator as shown below. Do not regroove below the depth of the indicator.
Regrooving depth indicators are holes (of 4 mm depth) situated on the treadwear indicator to indicate the recommended regrooving depth for these tires.
It is the responsibility of the regroover to assure that all
Federal Regulations are met. See US Code of Federal
Regulations: Title 49, Transportation; Parts 569 and
393.75.
One of the regulations governing regrooving tires requires that a regrooved tire must have a minimum of
90 linear inches of tread edge per linear foot of the circumference.
The MICHELIN ® XZU ® 2 tire has only 3 circumferential tread grooves. To meet the 569.7 (iii) requirement, additional lateral grooves must be added as shown below.
U. S. CODE OF FEDERAL REGULATIONS:
TITLE 49, TRANSPORTATION; PARTS 569.7 AND 393.75
(EXTRACTS)
For complete regulations, go to: ecfr.gpoaccess.gov
PART 393.75, SECTION D
“(d) No bus shall be operated with regrooved, recapped or retreaded tires on the front wheels.”
99
100
NOTES
Truck Tires RV Tires Commercial Light Truck Tires Retreads
MICHELIN
®
Truck Tire Data Book
RV Tires • Commercial Light Truck Tires • Truck Tires • Retreads
To learn more please contact your MICHELIN Sales Representative or visit
www.michelintruck.com
To order more books, please call Promotional Fulfillment Center
1-800-677-3322, Option #2
Monday through Friday, 9 a.m. to 5 p.m. Eastern Time
United States
Michelin North America, Inc.
One Parkway South
Greenville, SC • 29615
1-888-622-2306
Canada
Michelin North America (Canada), Inc.
2500 Daniel Johnson, Suite 500
Laval, Quebec H7T 2P6
1-888-871-4444
Mexico
Industrias Michelin, S.A. de C.V.
Av. 5 de febrero No. 2113-A
Fracc. Industrial Benito Juarez
7 6120, Querétaro, Qro. Mexico
011 52 442 296 1600
An Equal Opportunity Employer
Copyright © 2011 Michelin North America, Inc. All rights reserved.
The Michelin Man is a registered trademark owned by Michelin North America, Inc.
MICHELIN ® tires and tubes are subject to a continuous development program. Michelin North America, Inc. reserves the right to change product specifications at any time without notice or obligations.
MWL40731 (09/11)
MICHELIN
®
Data Book
Truck Tire
September 2011
14th Edition
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 1 MICHELIN TRUCK TIRE DATA BOOK
- 2 Table of Contents
- 4 Mounting and Safety Instructions
- 5 Part 1: Safety - Mounting the Tire
- 6 Part 2: Mounting and Demounting Tubeless Tires
- 9 Part 3: Mounting and Demounting Tube-Type Tires
- 12 RV Tires
- 13 MICHELIN® RV Tire Reference Chart
- 14 XRV
- 14 MICHELIN® Inflation Charts for RV Usage
- 15 Wheel Diameter - 16"
- 15 Wheel Diameter - 17.5"
- 15 Wheel Diameter - 19.5"
- 16 Wheel Diameter - 22.5"
- 17 Wheel Diameter - 24.5"
- 18 RV Front Axle Overload
- 19 Commercial Light Truck Tires
- 20 MICHELIN® Commercial Light Truck Tire Reference Chart
- 21 MICHELIN® Commercial Light Truck Tire Warranty
- 22 LTX A/S
- 22 LTX M/S
- 23 LTX M/S2
- 23 LTX A/T2
- 24 XPS RIB
- 24 XPS TRACTION
- 25 MICHELIN® Inflation Charts for Light Truck Tires
- 25 Wheel Diameter - 16"
- 25 Wheel Diameter - 17"
- 26 Truck Tires
- 27 Tread Pattern Designations
- 28 Tire Applications
- 28 Product Segmentation
- 29 MICHELIN® Truck Tire Reference Chart
- 36 MICHELIN® Product Availability
- 36 Long Haul
- 37 Regional
- 38 On/Off Road and Specialty Tires
- 39 Urban
- 40 Steer/All-Position Tires
- 40 XZA3+ Evertread
- 40 XZA (365/70R22.5)
- 41 XZA2 Energy
- 41 XZA-1+
- 42 XZA 1
- 42 XZE
- 43 XZE2
- 43 XZE2 / XZE2+
- 44 XZA
- 44 X ONE XZY 3
- 45 XZY 3
- 45 XZY 3 Wide Base
- 46 X ONE XZU S
- 46 XZU S2
- 47 XZU S Wide Base
- 47 XZU 3
- 48 XZU 2
- 48 X Coach XZ
- 49 XFE Wide Base Steer
- 50 Drive Tires
- 50 X ONE XDA ENERGY
- 50 X ONE XDN2
- 51 XDA 5
- 51 XDA3 / XD2
- 52 XDA ENERGY
- 52 XDN2 / XDN2 GRIP
- 53 X MultiWay XD
- 53 XDE M/S
- 54 XDE 2+
- 54 X Works XDY
- 55 XDY 3
- 55 XDY-2
- 56 XDY-EX2
- 57 XDS / XDS 2 (Standard Size)
- 57 XDS 2 (19.5" Wheel)
- 58 Trailer Tires
- 58 X ONE XTA
- 58 X ONE XTE
- 59 XT-1
- 59 XTA
- 60 XTA ENERGY
- 60 XTA 2 ENERGY
- 61 XTE
- 61 XTE2
- 62 XTY 2
- 63 Specialty Tires
- 63 XZA 4
- 63 XZY
- 64 XZL
- 64 XZL Wide Base
- 65 XZL+
- 65 XML
- 66 XDL
- 66 XS
- 67 MICHELIN Inflation Charts for Truck Tires
- 67 Wheel Diameter - 15"
- 67 Wheel Diameter - 16"
- 67 Wheel Diameter - 17.5"
- 68 Wheel Diameter - 19.5"
- 69 Wheel Diameter - 20"
- 70 Wheel Diameter - 20.5"
- 70 Wheel Diameter - 21"
- 71 Wheel Diameter - 22.5"
- 75 Wheel Diameter - 24"
- 75 Wheel Diameter - 24.5"
- 76 Retread Products
- 77 MICHELIN Retreads Quick Reference Tread Guide
- 78 Custom Mold Tread Guide
- 78 Casing Fitment Guide
- 79 Recommended Buffing Specifications
- 81 Retread Tread Designs
- 81 X One Retreads
- 81 X One XDA Pre-Mold Retread
- 81 X One XDA-HT Pre-Mold Retread
- 81 X One XTA Pre-Mold Retread
- 81 X One XTE Pre-Mold Retread
- 81 X One XZU S Pre-Mold Retread
- 82 Drive Position Retreads
- 82 XDA2 19/23 Pre-Mold Retread
- 82 XDA-HT High Torque Pre-Mold Retread
- 82 XD4 Pre-Mold Retread
- 82 XDN2 Pre-Mold Retread
- 82 XDN Pre-Mold Retread
- 82 XDHT Pre-Mold Retread
- 83 XDA Pre-Mold Retread
- 83 XDC 18/22 Pre-Mold Retread
- 83 XDC LL Pre-Mold Retread
- 83 XM+S4 Pre-Mold Retread
- 83 XDE M/S Pre-Mold Retread
- 83 XDS Pre-Mold Retread
- 84 XDU S Pre-Mold Retread
- 84 XDY Pre-Mold Retread
- 84 XDY-1 Pre-Mold Retread
- 84 All-Wheel Position Retreads
- 84 XZA Pre-Mold Retread
- 84 XZE SA Pre-Mold Retread
- 84 XZE Pre-Mold Retread
- 85 XZE 2 Pre-Mold Retread
- 85 XZU 2 Pre-Mold Retread
- 85 XZU S Pre-Mold Retread
- 85 XZY Pre-Mold Retread
- 85 XZY-1 Pre-Mold Retread
- 85 XZY-2 Pre-Mold Retread
- 86 Trailer Position Retreads
- 86 XT-1 Pre-Mold Retread
- 86 XTA-1 Pre-Mold Retread
- 86 XTA Pre-Mold Retread
- 86 XTY SA Pre-Mold Retread
- 87 Wide Base Retreads
- 87 XTE2 Wide Base Pre-Mold Retread
- 87 XZA Wide Base Pre-Mold Retread
- 87 XZH Wide Base Pre-Mold Retread
- 87 XZL Wide Base Pre-Mold Retread
- 87 XZY Wide Base Pre-Mold Retread
- 88 Appendix
- 89 Tubes, Flaps and Valves
- 91 Units of Measurement
- 91 Pressure Unit Conversion Table
- 91 Load Range / Ply Rating
- 91 Speed Symbol
- 92 Load Index
- 93 Static and Low Speed Load and Pressure Coefficients
- 94 Proper Application of On/Off Road (Y and L) Tires
- 94 Cold Climate Pressure Correction Data
- 95 Changes in Top Speed When Tire’s Rev./Mile Changes
- 96 Load / Inflation Table for 315/80R22.5 LRL on 8.25" Wheel
- 96 Technical Specifications for Michelin 455/55R22.5 LRM on 13.00" Wheel Steer Axle, First Life Only
- 97 Front Axle Overload on Auto Haulers
- 98 295/60R22.5 LRJ Adjusted for 8.25" Wheel and 75 mph Max Speed
- 99 Balance and Runout
- 100 Truck Tire Branding
- 100 Tread Depth Measurement on Tires Retreaded with the XDU S Pre-Mold™ Retread
- 101 Proper Application of Urban (“U”) Tires
- 102 Regrooving the Michelin XZU 2
- 104 Back Cover - Contact Information