Sansui HDLCDVD265, HDLCDVD265A Owner's Manual

Add to my manuals
43 Pages

advertisement

Sansui HDLCDVD265, HDLCDVD265A Owner's Manual | Manualzz

OWNER'S MANUAL

GUIDE D'UTILISATION

IJSANSUI

26" TFT LCD DIGITAL TV WITH DVD PLAYER

TI_LI_VISEUR NUMI_RIQUE AVEC I_CRAN TFT .&,CRISTAUX

LIQUlDES DE 26 PC ET LECTEUR DVD

HDLCDVD265

HDLCDVD265A

,f4 v" H rn|

HIG_O_FlmlFION [_ _VISlON HIGH-DEFINITION MULTIMEDIA

TM

INTERFACE

DiGiTAL ]

I

ATTENTION

If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code.

Si vous utilisez avec cet appareil une tetecommande universelle (autre que celle vendue avec ce teteviseur), consultez ta documentation accompagnant Ia telecommande universelle afin de connaTtre le code num6rique cor-

1 respondant au televiseur.

I

SELECTION DU MODE AIR/CABLE

When shipped from the factory, tile Signal Type option is set to the "Cable" (Cable Television) mode.

If not using Cable TV, set this menu option to the "Air" position.

Lorsque rappareil AIR/CABLE MODE SELECTION Si vous n'utilisez pas la c&blodistribution, selectionnez I'option ,, Air _.

f

IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED

PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL

S'IL FAUT CONTACTER LE SERVICE CLIENTC:LE, PRENEZ SOIN D'I_TRE MUNI

DU NUM¢:RO DE MODELE AVANT D'APPELER.

CUSTOMER SERVICE - 1-800-289-0980

SERVICE/SERVICE CLIENTELE: 1-800-289-0980

ORLON WEBSlTE

SITE WEB ORLON

FOR INFORMATION ON OUR OTHER PRODUCTS, PLEASE VISIT OUR WEBSITE AT

POUR OBTENIR DES INFORMATIONS SUR NOS AUTRES PRODUITS, VEUILLEZ VISITER NOTRE SITE WEB: www.orionsalesinc.oom

1

Before operating the unit, please read this manual thoroughly.

Avant de faire fonctionner I'appareil, veuillez lire le present guide attentivement.

I=I_ [_ lq(,.")-"

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER

(OR BACK).

NO USER-SERVICEABLE

PARTS INSIDE.

REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

/k The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY

FROM THIS PRODUCT AT TIMES.

CAUTION:

TO PREVENT ELECTRIC SHOCK DO NOT USETHIS POLARIZED PLUG WITH AN EX-

TENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE

FULLY INSERTED TO PREVENT BLADE EXPOSURE.

WARNING:

CAUTION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference energy and, in a residential installation.

This equipment if not installed radio communications.

and used in accordance generates, uses and can radiate radio frequency with the instructions, may cause harmful interference to

However, there is no guarantee that interference cause harmful interference to radio or television wilt not occur reception, in a particular which installation.

can be determined

If this equipment does by turning the equipment by one or more of the following measures: off and on, the user is encouraged to try to correct the interference

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radioFFV technician for help.

Changes or modifications not expressly approved by the partly could void the user's authority to operate this equipment.

responsible for compliance with the FCC Rules

CAUTION:

THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.

TO ENSURE PROPER USE OFTHIS PRODUCT, PLEASE

READ THIS OWNER'S MANUAL CAREFULLY AND RETAIN

FOR FUTURE REFERENCE.

SHOULD THE UNIT REQUIRE

MAINTENANCE, CONTACT AN AUTHORIZED SERVICE

LOCATION-SEE SERVICE PROCEDURE.

USE OF CONTROLS, ADJUSTMENTS ORTHE

PERFORMANCE OF PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS

RADIATION EXPOSURE.

TO PREVENT DIRECT EXPOSURE TO THE LASER BEAM,

DO NOTTRY TO OPEN THE ENCLOSURE.

RADIATION MAY

BE PRESENTWHEN THE ENCLOSURE IS OPENED.

DO

NOT STARE INTO THE BEAM.

Location of the required Marking

The rating sheet and the safety caution are on the rear of the unit.

CERTIFICATION: COMPLIES WITH FDA

RADIATION PERFORMANCE STANDARDS, 21

CFR SUBCHAPTER J.

Complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice No. 50, dated

June 24, 2007.

The lamp(s) within this product contain mercury.

Disposal should be in compliance with local, state or federal laws.

I

Record the model number and serial number.

Model number Serial number

iMPORTANT SAFETY iNSTRUCTiONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Cmeanonly with dry cloth.

7) Do not block any ventimation openings.

Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsomete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus.

16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.

17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

18) Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

CODE

19) If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some /

NATIONAL

-__

ELECTRICAL protection against voltage surges and built-up static charges, Section 81 0 of the National

Electrical Code, ANSl/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding _

/J

EQUIPMENT _ of the lead-in wire to an antenna discharge unit, size of grounding conductors, location

NEC-NATION_ $_

ELECTRICALCODE of antenna discharge unit, connection to $2898A grounding electrodes, and requirements for the grounding electrode.

ELECTRODESYSTEM

20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part.

Unauthorized substitutions may result in fire, electric shock or other hazards.

21 ) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

22) Keep your fingers clear of the disc slot as it is closing. It may cause injury.

IMPORTANTSAFETY INSTRUCTIONS(continued)

23) When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet.

Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections.

24) Reduce the volume to the minimum level before you turn on the product.

Otherwise, sudden high volume sound may cause hearing or speaker damage.

25) Do not allow the product to output distorted sound for an extended period of time. It may cause speaker overheating and fire.

26) When you use the headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage.

27) Do not look into the opening of the disc slot or ventilation opening of the product to see the source of the laser beam. It may cause eye damage.

28) Do not use a cracked, deformed, or repaired disc.These

discs are easily broken and may cause serious personal injury and product malfunction.

29) This reminder is provided to call the cable TV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

30) The socket-outlet must be installed near the unit and easily accessible.

CONDENSATION

Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, player's performance will be impaired.

To prevent this, let the player stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually.

Condensation may also form during the summer if the player is exposed to the breeze from an air conditioner.

In such cases, change the location of the player.

HOWTO HANDLE THE LCD PANEL

• Do not press hard or jolt the LCD panel.

It may cause the LCD panel glass to break and injury may occur.

• If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation.

If the liquid gets in your mouth, immediately gargle and consult with your doctor.

Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.

CHILD SAFETY:

It Makes A Difference How and Where You Use Your Flat Panel Display

Congratulations on your purchase!

As you enjoy your new product, please keep these safety tips in mind:

THE ISSUE

The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases.

However, flat panel displays are not always supported on the proper stands or installed according to the manufacturer's recommendations.

Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and cause injury.

THIS MANUFACTURER CARES!

The consumer electronics industry is committed to making home entertainment enjoyable and safe.

TUNE INTO SAFETY

One size does NOT fit all. Follow the manufacturer's recommendations for the safe installation and use of your flat panel display.

Carefully read and understand all enclosed instructions for proper use of this product.

Don't allow children to climb on or play with furniture and television sets.

Don't place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.

Remember that children can become excited while watching a program, especially on a "larger than life" flat panel display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down.

Care should be taken to route all cords and cables connected to the flat panel display so that they cannot be pulled or grabbed by curious children.

WALL MOUNTING: IFYOU DECIDE TO WALL MOUNTYOUR FLAT PANEL DISPLAY, ALWAYS:

Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL).

Follow all instructions supplied by the display and wall mount manufacturers.

If you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional installation.

Make sure that the wall where you are mounting the display is appropriate to support the weight of the unit/ product and wall mount.

If you are unsure, contact a professional installer.

A minimum of two people are required for installation.

Flat panel displays can be heavy.

SAFETY PRECAUTIONS

The unit emits heat when in operation.

Do not place any covers or blankets on the unit, this may cause overheating.

Do not block ventilation holes, or set up near radiators.

Do not place in direct sunshine.

When placing on a shelf leave 10 cm (4 inches) free space around the entire unit.

A

10cm

Notes when mounting the LCD TV/DVD on a wall

If the unit is to be mounted on the wall, contact the retailer where you purchased the LCD TV/DVD for advice, and have the equipment professionally installed.

Incomplete or improper installation may cause injury to you, and/or damage to the LCD TV/DVD.

IMPORTANT NOTICE

Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for long periods of time, the image can become permanently engrained in the LCD Panel and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY.

Never leave your

LCD Panel on for long periods of time while it is displaying the following formats or images:

• Fixed Images, such as stock tickers, video game patterns, TV station Iogos, and websites.

• Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (black bars on left and right sides of screen).

The following symptoms are not signs of malfunction but technical limitation.

Therefore we disclaim any responsibility for these symptoms.

• LCD Panels are manufactured using an extremely high level of precision technology, however sometimes parts of the screen may be missing picture elements or have luminous spots.

This is not a sign of a malfunction.

• Do not install the LCD Panel near electronic equipment that is susceptible to electromagnetic waves.

Some equipment placed too near this unit may cause interference.

• Effect on infrared devices -There may be interference while using infrared devices such as infrared cordless headphones.

Featu res

LCD color TV With DVD/CD player

Unique space saving design combines a 26" LCD color TV and a DVD/CD player.

A DVD disc has much more capacity, but is the same size as an audio CD disc.The

Picture/Audio quality of a

DVD exceeds other software.

The picture quality is higher than Super VHS video cassettes.

The audio quality is higher than an audio CD. The DVD also has special options; audio language selection, subtitle language selection, or multi-angle, etc.

The DVD PLAYER can play back both audio CDs and MP3/WMA/JPEG CDs.

Compatible with a wide range of DVD audio outputs

Digital Audio Jack (Coaxial)

When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the effect of being in a movie theater or a concert hall.

• Surround standard is different from Dolby Digital. This format is already in use in many theaters.

By connecting this unit to a DTS decoder or an AV amplifier with a built-in DTS decoder, the DTS audio of DVD discs recorded in this format can be enjoyed.

However, audio will not be output from the analog audio output jacks.

• By connecting this unit to an AV amplifier with a built-in MPEG decoder, the MPEG audio of DVD discs recorded in this format can be enjoyed.

• The Linear PCM sound of a 48 kHz/24 bit through 96 kHz/24 bit exceeds audio CD sound.

Convenience Features

Direct selection of your desired scenes using Title/Chapter/TimePl'rack desired scene.

- You can play back from the

Recalling Up to 3 Scenes - You can program up to 3 scenes in memory and recall the marked scenes.

Frame Advance - The PAUSE/STILL moves one frame at a time.

Slow Motion - The SLOW moves you back and forth through the program by 4 steps of 1/7-1/2 times.

Repeat Playback -You can repeat chapter, track, title, sides or material between two selected points.

Program Playback (Audio CD/MP3/WMA CD) - You can play back tracks in programmed sequences.

Zoom -You can zoom in the selected subject on the screen during playback.

Note: Make sure that discs are suitable for the following functions.

Multi-Language - Maximum 32 language subtitles and maximum 8 language soundtracks can be played back for movies or programs.

Multi-Angle - Pictures of Sports or a Live Concert are recorded with many cameras.

When you play such a disc, you can change the angles during playback.

Parental Control - You can limit the play back of scenes or sounds of DVD discs that have a rating level encoded on the disc.

Video Aspect Ratio - You can change the aspect ratio of the screen for your monitor.

TV Features

Integrated Digital Tuner -You can view digital broadcasts without using a Digital TV Set-Top Box.

Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers.

Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.

Programmable TV Sleep Timer - Operable from the remote control, the TV can be programmed for up to 120 minutes to turn off automatically.

On-Screen 3 Language Display - You can select one of 3 languages, English, Spanish or French for onscreen programming.

V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is encoded with this information.

V-chip will allow you to set a restriction level.

* _ is a trademark of DVD Format/Logo Licensing Corporation.

* Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of

Dolby Laboratories.

* Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending.

DTS and DTS Digital Out are registered trademarks and the DTS Iogos and Symbol are trademarks of DTS, Inc.@ 1996-2008 DTS, Inc. All Rights Reserved.

* HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of

HDMI Licensing LLC.

Contents

IMPORTANT SAFETY INSTRUCTIONS ........... 3

SAFETY PRECAUTIONS .................................

5

IMPORTANT NOTICE .......................................

5

Features ............................................................

6

Contents ...........................................................

Disc ...................................................................

Location of controls ...........................................

Remote control ...............................................

Power source ..................................................

9

11

7

8

12

Antenna connections ......................................

13

Cable TV connections .....................................

14

Starting setup .................................................

15

Setting the on-screen language ......................

15

Memorizing channels ......................................

15

TV operation ...................................................

17

Labeling channels ...........................................

18

Labeling video inputs ......................................

18

Setting the V-Chip ...........................................

Closed Caption ...............................................

CC advanced ..................................................

18

20

21

Adjusting the picture preference .....................

21

Picture control adjustment ..............................

21

Selecting the color temperature ......................

22

Setting the picture size ....................................

22

Film mode .......................................................

23

Picture control adjustment in the PC mode ...........23

DNR ................................................................

23

Sound control adjustment ...............................

24

Selecting Stereo/

Second Audio Program (SAP) ........................

24

Selecting the audio language ..........................

24

Selecting the HDMI audio input source ........... 25

Turning off the built-in speakers ......................

25

Adjusting the back lighting ..............................

25

Checking the digital-signal strength ................ 25

Setting the auto shut off ..................................

25

Resetting your settings ...................................

26

Preparation .....................................................

26

Status display of disc ......................................

26

Playback procedure ........................................

Special playback .............................................

26

27

MP3/WMA/JPEG and Audio CD playback ...... 27

Setting the JPEG interval ................................

29

Program playback (CD) ..................................

29

Repeat playback (CD) .....................................

30

Random playback (CD) ..................................

30

Zooming ..........................................................

30

Locating desired scene ...................................

30

Repeat playback .............................................

30

Marking desired scenes ..................................

31

Changing soundtrack language ......................

31

Subtitles ..........................................................

32

Changing angles .............................................

Title selection ..................................................

DVD menu ......................................................

32

32

32

Setting the language .......................................

32

Setting the aspect ratio of TV screen .............. 33

Setting on screen display ................................

33

Setting the picture mode .................................

33

Night mode .....................................................

Digital out ........................................................

Parental control ...............................................

34

34

34

Temporary disabling of rating level by DVD disc ....................................................

35

Language

Connections code list ..........................................

to other equipment .....................

36

37

Reception disturbances ..................................

40

Problems and troubleshooting ........................

41

Specifications ................................................

43

Disc

Playable discs

Disc type and logo mark

DVD Video

CD-DA v =o E o

DIGITAL AUDIO

The following discs are also available.

• DVD-R/RW discs of DVD video format.

• CD-R/RW discs of MP3/WMA/JPEG.

content

Video

(moving pictures)

Audio

CAUTION:

• Only the left types of discs can be played on this unit. DVD-ROM, CD-ROM, SVCD, CVD, VCD, etc.

cannot be played.

• 8cm discs can be played directly.

If an 8cm disc adapter is used it will cause errors.

• If you insert an irregular shaped disc, it may get stuck and cause a malfunction.

• The use of a ring protector or other disc accessories will cause errors.

• This unit is to be used exclusively with the NTSC color system.

PAL and SECAM system discs cannot be used with this unit.

• Some CD-R/RWs and DVD-R/RW can not be played back depending on the recording conditions.

Region Number

Region number (Regional restriction code)is built-in to the unit and DVD video discs.

Region number "1" or "ALl/' of DVD video discs can be used on this unit.

_

Title

When two or more movies are recorded on a disc, the disc is divided into two or more sections. Each section is called a "TITLE".

<CHAPTERq TITLEI CHAPTER1 _2

_cDVDHAPTERDISC_

2 CHAPTER D,_3

Chapter

The titles can be subdivided into many sections.

Each section is called a "CHAPTER".

Track

An Audio CD can contain several items.

These are assigned to the tracks.

_RACK 1 TRACK 2

Audio - CD

TRACK 3 TRACK 4 TRACK 5 _

Removing Disc from Case

Be sure to hold the edge of disc. Do not touch the surface of the disc.

Pick up the disc gently from the case.

• Do not scratch the disc.

• Do not get dirt on the surface of the disc.

• Do not stick a label or adhesive tape on the disc.

• Do not drop or bend the disc.

Storing Disc

• Store the disc in the case to avoid risk of scratches, dirt or damage.

• Do not leave disc exposed to direct sunlight or in hot or humid places,

Cleaning Disc

Wipe the disc with a clean, dry cloth from center to edge.

• Do not wipe the disc in a circular motion.

• Do not use liquid or aerosol cleaners.

Location of controls

Front

POWER indicator

Left side

DISC slot --

/

\

-EJECT button

+

(G)--t--

(G_-_-:

-VOLUME +/- buttons

.(0)-4-

CHAPELI u_u i

((3)4-

INpUT/B,r_J_

@--

--

_OWER e-

--

--

-CHANNEL A/I_ (PLAY)button

(STOP) button CHANNELV/N

MENU button

INPUT/ENTER button

POWER button

To display the menu screen.

Press MENU button to display the menu screen.

CHANNEL ^/V buttons, VOLUME +/- buttons and INPUT/ENTER button can be used to select the desired setting during the menu screen operations.

Location of controls

Rear side

(continued)

IIlll VAR (VARIABLE) AUDIO OUT jack

COAXIAL DIGITAL AUDIO OUT jack

RF (ANT) IN jack

AC INPUT jack HDMI 1/DVI IN jack COMPONENT IN jacks

HDMI 2 IN jack

PC/DVI AUDIO IN jack

LINE 2 VIDEO IN jack

LINE 1 IN jacks (VIDEO/S-VIDEO/AUDIO

AUDIO (L/R) jacks

(for COMPONENT IN and LINE2 VIDEO IN)

(L/R))

Remote control

POWER

DISPLAY/-

TV/DVD

__ (EJECT)

0-9

TV/DVD

VOL

@@@0*

®®®o !

MUTE

®@@0

SLEEP

SETOP ®Oovo

_MENU MENU

CH/X O

EXIT_

CANC

0 c,v %

P MENU

PLAY

SKIP SUBTITLE STOP SKIP

VOL +/-

MUTE

SLEEP

SETUP

TV MENU

DVD MENU

CH ,,K/V

• • • _

ENTER

EXIT

CANCEL

TOP MENU

SEARCH

PLAY

SKIP

SUBTITLE

STOP

SLOW

PAUSE/STILL

SLOW PAUSE/STILL PLAYMODE SLOW

AUDIO

0000

RETURN REPEATA-B ANGLE

CCD/

JUMP

RECALL/

ZOOM SCREENSIZE MARKER

0000

INPUT

SELECT

PLAY MODE

AUDIO

RETURN

REPEAT A-B

ANGLE

SCREEN SIZE

MARKER

CCD

JUMP

RECALL

ZOOM

INPUT SELECT

Power On/Off

Call TV information

Call DVD information

Input "-" for digital channels

Switch between TV/AV and DVD

Eject a disc

Direct channel selection of TV

Input setting

Enter a password

Adjust volume of TV

Switch off the sound

Sleep timer

TV mode - Display menu of TV

DVD mode - Call up initial setup mode

Display DVD menu

Select channel of TV

Cursor buttons

Enter information in the menu

Exit from On-Screen menu

Reset information in the menu

Select title

Fast Forward/Review playback

Playback

Skip chapter to forward or reverse direction

Set subtitle

Stop

Forward/Reverseslow motion

Pause CD sound

Still picture of DVD

Select playback mode

Change sound track language

Remove DVD setup menu

Repeat playback between A and B

Change playback angle

Display PICTURE SIZE menu

Index

Closed Caption

Locating desired scene

Switch between present/last channel

Zoom

Display source selection menu

ATTENTION

If you purchase a universal remote from a local retailer, please contact the remote manufacturer for the correct programming code,

11

Remote control

Inserting Batteries

1

Open the battery compartment .I

Install two "AAA" batteries, cover in the direction of the arrow, paying attention to the polarity diagram in the battery compartment.

(continued)

Replace the compartment cover.

Operation

• Aim the remote control at the remote sensor and press control buttons to operate.

• Operate the remote control within a 30 ° angle on either side of the remote sensor, up to a distance of approximately 15 feet.

Approximately 15 feet

,/ 30 I 30 \\

NOTE:

• Do not leave the remote control unit exposed to direct sunlight or in hot or humid places.

• The remote control unit uses infrared beams to transmit signals, so sunlight or fluorescent light on the remote sensor may shorten operating distance.

• Incorrect use of batteries may cause them to leak or burst. Read the battery warnings and use the batteries properly.

• Do not mix old and new batteries.

• Remove batteries if the remote control will not be operated for an extended period of time.

Power source

TO USE AC POWER

1. Connect the AC cord plug into this unit's AC IN jack.

2. Connect the AC cord into an AC outlet.

Vider Hole

AC Outtet nd_ JI

AC cord (supplied)

NOTE:

• Please make sure to insert the cord securely at both the LCD TV/DVD and the wall outlet.

• The AC Cord has a polarized type AC line plug. If the supplied AC cord does not match your AC outlet, contact a qualified electrician.

WARNING:

• DO NOT CONNECTTHIS UNITTO THE POWER USING ANY DEVICE OTHERTHAN THE SUPPLIED AC

CORD.THIS

COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE.

• DO NOT USE WITH A VOLTAGE OTHER THAN THE POWER VOLTAGE SPECIFIED.

THIS COULD CAUSE

FIRE, ELECTRICAL SHOCK, OR DAMAGE.

CAUTION:

• WHEN THIS UNIT IS NOT USED FOR A LONG TIME, (E.G., AWAY ON A TRIP) IN THE INTEREST OF

SAFETY, BE SURE TO UNPLUG IT FROM THE AC OUTLET.

• DO NOT PLUG/UNPLUG THE AC CORD WHEN YOUR HANDS ARE WET. THIS MAY CAUSE ELECTRICAL

SHOCK.

• IF YOU NEED TO REPLACE THE SUPPLIED AC ADAPTER OR AC CORD, THE SPECIFIED ONE IS

RECOMMENDED.

CONTACT CUSTOMER SERVICE AT 1-800-289-0980.

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system.

If you are using a Cable TV service, see page 14 for Cable TV connections.

Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)

Connect the 75 ohm cable from the combination

VHF/UHF antenna to the antenna jack.

Antenna Antenna

Jack Jack

® ®

If your combination VHF/UHF antenna has a 300 ohm twin-lead wire, the use of the 300-75 ohm matching transformer may be necessary.

!

t

750hm 300-750hm

Coaxial _ Matching _

Cable _ Transformer

Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)

Antenna @

Connect the UHF 300 ohm twin-lead wire to the Combiner (not supplied).

Connect the VHF

300 ohm twin-lead wire to the 300-75 ohm

Matching Transformer.

Attach the Transformer to the Combiner, then attach the Combiner to the

Antenna Jack.

C°mbiner __=_

UHF300o I I HF300ohm

300-75 ohm Matching Transformer

Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)

@

Connect theVHF 75 ohm cable and UHF 300 ohm twin-lead wire tothe Combiner (not supplied).

Attach the Combiner to the Antenna Jack.

!

Combiner oHF300o 11"r

_ _j---VHF 75 ohm

13

Cable TV connections

This TV has an extended tuning range and can tune most cable channels without using a Cable TV

Converter box, Some cable companies offer "premium pay channels" where the signal is scrambled.

Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.

For subscribers to basic Cable TV service

For basic Cable TV service not requiring a Converter/

Descrambler box, connect the 75 ohm Coaxial Cable directly to the Antenna Jack on the back of the TV.

Jack

I _

75 ohm

Cable ........

t

Antenna 1

For subscribers to scrambled Cable TV service

If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler box, connect the incoming 75 ohm Coaxial Cable to the Converter/Descrambler

Cable, connect the output jack of the Converter/Descrambler box. Using another 75 ohm Coaxial box to the Antenna Jack on the TV. Follow the connections shown below. Set the TV to the output channel

3 or 4) and use the Converter/Descrambler of the Converter/Descrambler box to select channels.

box (usually channel

Incoming

75 ohm

Cable TV

Cable

D

I

Converter/

Descrambler I 75 ohm Cable to TV

Antenna

Jack

D

@

For subscribers to unscrambled Cable TV service with scrambled premium channels

If you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels require the use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available from the Cable TV company or an electronics supply store). Follow the connections shown below. With the switch in the "B" position, you can directly tune any nonscrambled channels on your TV. With the switch in the

"A" position, tune your TV to the output of the Converter/Descrambler

Converter/Descrambler box to tune scrambled channels.

box (usually channel 3 or 4) and use the

75 ohm

Cable TV

Cable

Incoming

:-

_Sp litter

DescrambIer Antenna

Jack

Converter/

A/B Switch | ,_/_ | 75 ohm Cable to TV p,

I__ @

Starting setup

The Starting Setup menu appears the first time you turn on the TV, and assists you to select the menu language, specify the Air/Cable setting, and program your channels automatically.

IMPORTANT: Make sure that the antenna or cable

TV system connection is made!

1

To turn on the TV, press POWER (POWER indicator on the front of the unit changes green.

It may take approx. 10 seconds for a picture to appear on screen.). The starting setup function begins. Press < or • to select your desired language.

4

Press • or • to select"Setup", then press • or

ENTER.

5 Press • or • to select"Language".

t_

,_ Press • or to select"Signal Type", then press

< or _,-to select "Cable" or "Air".

3

Press • or • to select"Automatic Search", then press ENTER or •.

4

Now the "Auto Setup" starts. After the starting setup is completed, the TV channel appears on the screen.

• Depending on the reception condition, it may take from 15 minutes to 30 minutes to complete memorizing digital cable channels. Please be patient.

NOTE:

• If you press EXIT/CANCEL in the process of "Auto

Setup", the Starting Setup stops and changes to the normal screen.

• When you make a menu selection, your changes occur immediately.You

do not have to press EXIT/

CANCEL to see your changes.

• When you are finished programming the menus, press EXIT/CANCEL

Setting the on-screen language

You can choose from three different languages

(English, French and Spanish) for the on-screen displays.

Select the language you prefer first, then proceed with the other menu options.

1 Press POWER.

2

Press TV/DVD to select TV mode.

3

Press SETUP/TV MENU.TheTV

menu screen will appear.

6

Press < or • to select the desired language:

English, French (Frangais) or Spanish (EspaSol).

7

Press EXIT/CANCEL to return to the normal screen.

NOTE:

• If no buttons are pressed for more than about 60 seconds, the menu screen will return to normal operation automatically.

Memorizing channels

This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels.

Before selecting channels, they must be programmed into the

TV's memory.To

use this TV with an antenna, set the Signal Type option to the Air mode. When shipped from the factory, this menu option is in the Cable mode.

Air/Cable selection

1

Press SETUP/TV MENU in the TV mode.The

TV menu screen will appear.

2

Press • or • to select "Channel", then press • or ENTER.

3

Press • or • to select"Auto Ch Memory", then press • or ENTER.

4

Press • or • to select"Signal Type".

5 Press < or • to select "Air" or"Cable".

O Press EXIT/CANCEL to return to the normal screen.

15

CABLE CHART

The chart below is typical of many cable system channel allocations.

't '_ _ _ _8 7 _ _ 2,2

23 24 25 26 27 28 29 30 31

60 61 62 65 66

51

OO _

52 53

QQ

54

RR

55

SS

56

TT

57

UU

58

VV

...

._ _ #_K_L M_...

ooop_,p

77 7B 79 80 81 82 83 84 85 86 87 88_ 89 90 91 92 93

9s 96 9_ 98 9_ _oo_o__o__o3 _o4 lO6 _o8_0__o _

Numbe,o_mJsw

113

A-4

132

A-3

133

A-2

134

114 115 116

113 114 115 116

A-I

135

11/

117

100

118

118

101 102 I03

119 120 121

119 120 121

104 105

122 123

122 123

106

124

124

107 108

125 126

125 126

109

AA

12/

12Z

110

BB

128

128

111

CO

129

129

131 I3_ 133 134 135

94

NOTE:

• It may take a few seconds for a digital channel picture to appear on screen after being selected.

Automatic search

/

-4

Press SETUP/'rv MENU in the TV mode.The

TV menu screen will appear.

2

Press • or • to select"Channel", then press • or

ENTER.

3

Press • or • to select"Auto Ch Memory", then press • or ENTER.

4

Press • or • to select"Automatic Search", then press • or ENTER.

3

Press • or • to select "Channel", then press • or

ENTER.

4

Press • or • to select "Add/Delete", then press • or ENTER.

5 Press • or • to select"Adding Channel", then press • or ENTER.The

new channel will be added into the channel memory.

Press EXIT/CANCEL screen.

to return to the normal

Add/Delete channel

You can select the channel that you want to skip.

1

Press SETUP/TV MENU in the TV mode.The

TV menu screen will appear.

Press • or • to select "Channel", then press • or

ENTER.

3

Press • or • to select"Add/Delete", then press

• or ENTER.

4

Press • or • to select"Add/Delete", then press

• or ENTER.

5 Press • or • to select the channel that you want to skip.

5 The TV will begin memorizing all the channels available in your area.

• It may take from 15 minutes to 30 minutes to complete memorizing digital cable channels.

Depending on the reception condition, a bar display may not advance for several minutes, please be patient.

NOTE:

• Memorizing channels is best accomplished during evening "PRIMETIME" hours, as more stations are broadcasting digital signals.

Memorizing channels can only be accomplished while a station is broadcasting a digital signal to set that channel into memory.

• If you are unsure of the digital channels available in your area, you may visit www.antennaweb.org

receive a list based on your address or zip code.

to

Should you require further assistance you may call our toll-free customer service line at 1-800-289-0980.

• New digital channels may be added to your area periodically, it is recommended to perform the

"Automatic Search" procedure regularly.

Adding Channel

If you find a new channel unregistered, you can add the new channel into the channel memory.

1

Tune in the new channel.

2

Press SETUP/'rv MENU in theTV mode.TheTV

menu screen will appear.

6

7

Press • or • to select "Add" or "Delete", whichever function you want to perform.

Repeat steps 5 - 6 for other channels you want to add or delete.

8

Press EXIT/CANCEL screen.

to return to the normal

Clear All

All channels are deleted from the channel memory.

1 Press SETUP/TV MENU in the TV mode.The

TV menu screen will appear.

2

Press • or • to select "Channel", then press • or

ENTER.

3

Press • or • to select "Add/Delete", then press • or ENTER.

4

Press • or • to select "Clear All", then press • or

ENTER.

,_ Press EXIT/CANCEL screen.

to return to the normal

TV operation

To turn on the TV, press POWER.

(POWER indicator on the front of the unit changes green.

It may take approx.

10 seconds for a picture to appear on screen.)

2

Adjust the volume level by pressing VOL + or -.

The volume level will be indicated on the screen by blue bars. As the volume level increases, so do the number of bars. If the volume decreases, the number of blue bars also decreases.

3

Set the Signal Type option to the appropriate position (see "Air/Cable selection" on page 15).

4" Press the Direct Channel Selection (0-9, -) buttons to select the channel.

(If you press only channel number, channel selection will be delayed for a few seconds.)

TO SELECT ANALOG CHANNELS

1-9: Press 1-9 as needed.

Example, to select channel 2, press 2, then press

ENTER.

10-99: Press the 2 digits in order. Example, to select channel 12, press 1,2, then press ENTER.

100-125: Press the 3 digits in order. Example, to select channel 120, press 1,2, 0, then press ENTER.

TO SELECT DIGITAL CHANNELS

Press the first 3 digits, then press the - button, followed by the remaining number.

Example, to select channel 015-001, press 0, 1,

5, -, 0, 0, 1, then press ENTER.

• If a channel is selected with only audio content,

"Audio only" will be displayed on the screen.

• If a channel is selected with a weak digital signal, "Digital channel signal strength is low" will be displayed on the screen.

The same program may be available on either an analog channel or a digital channel.You

may choose to watch either format.

• If a channel is selected to which you have not subscribed, "Digital channel is encrypted" will be displayed on the screen.

VHF/UHF/CABLE

Air

CHANNELS

Cable

VHF

2-13

UHF

14-69

VHF

2-13

STD/HRC/IRC

14-36

37-59

60-85

(A) (W)

(AA) (WW)

(AAA) (ZZZ)

86-94

95-99

100-135

01

(86) (94)

(A-5) (A-l)

(100) (135)

(5A)

NOTE:

• If a channel with no broadcast is selected, the sound will automatically be muted.

• It may take a few seconds for a digital channel picture to appear on screen after being selected.

To select the video input source

To view a signal from another device connected to your LCD TV, such as aVCR player, press INPUT

SELECT, then press A/v or corresponding Number buttons (0-7), then press ENTER. You can select TV,

Video 1, Video 2, Component, HDMI1, HDMI2, PC or DVD depending on which input jacks you used to connect your devices.

CHA/V

Press and release CH A/v.

The channel automatically stops at the next channel set into memory.

For proper operation, before selecting channels, they should be set into the memory.

See "Memorizing channels" on pages 15 and 16.

DISPLAY

Press DISPLAY to display the current information on the screen.

When theTV receives a digital signal, the digital information will appear.

• Channel number • Station name

• Channel label (if preset) • Broadcast program name

• V-Chip rating • Signal type

• Sleep timer

• Program guide

• Resolution

• Audio language

• Picture size

When theTV receives a analog signal, the analog information will appear.

• Channel number

• V-Chip rating

• Sleep timer

• Audio information

(Stereo, SAP or Mono)

• Channel label (if preset)

• Signal type

• Picture size

• Resolution

Press DISPLAY again to clear the call display.

NOTE:

• After a few seconds, DISPLAY screen will return to normal TV-operation automatically.

RECALL

This button allows you to go back to the last channel selected by pressing RECALL.

Press RECALL again to return to the last channel you were watching.

17

MUTE

Press MUTE to switch off the sound. The TV's sound will be silenced and "Mute" will appear on the screen.

The sound can be switched back on by pressing this button again or the VOL + or -.

SLEEP

To set the TV to turn off after a preset amount of time, press SLEEP on the remote control.The

clock will count up 10 minutes for each press of the SLEEP button (Off, Oh 10m, Oh 20m, ..., 2h 0m). After the sleep time is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating.

To confirm the sleep timer setting, press

SLEEP and the remaining time will be displayed for a few seconds.To

cancel the sleep timer, press SLEEP repeatedly until the display turns to Off.

ol, ,ore

Labeling channels

Channel label appear with the channel number display each time you turn on the TV, select a channel, or press DISPLAY.

You can choose any four characters to identify a channel.

To create channel labels

|

4

Press SETUP/TV MENU in the TV mode.The

TV menu screen will appear.

2

Press • or to select"Channel", then press • or

ENTER.

3

Press • or • to select"Ch Label", then press • or ENTER.

The "Ch Label" menu will appear.

4

Press • or • to select a channel you want to label, then press •.

If the character which you desire appears, press

ENTER.

Repeat this step to enter the rest of the characters.

If you would like a blank space in the label name, you must choose the empty space from the list of characters.

O When you finish inputting the label name, press

EXIT/CANCEL to return to the normal screen.

7 Repeat steps 4-5 for other channel.You

can assign a label to each channel.

To clear a Ch Label

After step 4 above, press • or • to select "Label

Clear", then press • or ENTER.

NOTE:

• The channel labels will be reset after "Automatic

Search" on page 16.

Labeling video inputs

The Video Label feature allows you to label each input source for your TV.

1 Press SETUP/TV MENU in the TV mode.The

TV menu screen will appear.

2

Press • or • to select "Setup", then press • or

ENTER.

3

Press • or • to select "Video Label", then press

• or ENTER.

4

Press • or • to select an input which you want to label.

5

Press • or • to select the desired label for that input source.

5 Press • or • repeatedly until the character you want appears in the first space.

The characters rotation as follows:

6

-

VCR

DVD

DTV

SAT

CBL

HD

: Uses the default label name

:Video cassette recorder

: DVD video

: Digital TV set-top box

: Satellite box

: Cable box

: HDMI device (only for HDMI inputs)

Press EXIT/CANCEL to return to the normal screen.

Setting

the V-Chip

An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that you may choose to exclude.

The restriction applies to "TV Rating" and "Movie

Rating" if this data is transmitted.

You may set this restriction separately.

To use the V-Chip function, you must register a password.

r 0 "'9 <-_AI';ZPI_E _ ' '() @/+=q

1

Press SETUP/TV MENU in the TV mode.The

TV menu screen will appear.

2

Press • or to select"Lock", then press • or

ENTER.

3

Select and enter your password (4 digits) using

Number buttons (0-9), then press ENTER.

Genre:

ALL

D

L

S

V

FV

Movie Rating

: All

: Dialogue

: Language

: Sex

:Violence

: Fantasy Violence

[]

"_<" appears instead of the number.

4

Enter the same password again to confirm, then press ENTER.

The password is now registered.

NOTE:

• If you forget the password, contact Customer

Service at 1-800-289-0980 for assistance.

Your original remote control will be required.

• To avoid forgetting the password, write it down and keep in a safe place.

To set the V-Chip

1

Press SETUP/TV MENU in the TV mode.The

TV menu screen will appear.

2

Press • or • to select "Lock" menu, then press

• or ENTER.

3

Use Number buttons (0-9) to enter your password, then press ENTER. Then Lock menu will appear.

4

Press • or • to select"V-Chip", then press

4 or • to select "On".

5 Press • or • to select"V-Chip Set", then press

• or ENTER.

The V-Chip Set Menu appears.

6 Press • or • to select which rating will be used, then press • or ENTER. Each rating below will appear.

TV Rating

You can set the rating using age level and genre.

Age:

TV-Y

TV-Y7

TV-G

: All children

: 7 years old and above

: General audience

TV-PG :Parental guidance

TV-14 : 14 years old and above

TV-MA : 17 years old and above

8

G

PG

: All ages

: Parental guidance

PG-13 : Parental guidance less than 13 years old

R : Under 17 years old parental guidance suggested

NC-17 : 17 years old and above

X : Adult only

7

Press •/•/,/• press ENTER.

to select the desired rating, then

Press EXIT/CANCEL to return to the normal screen.

V-Chip function is activated now.

To use the TV after the TV is protected,

When a program is received that is blocked by the V-

Chip, press MUTE, then enter your password.

The protection will be temporarily overridden.

If the

TV is turned off or the channel is changed, the V-Chip restriction will be reactivated.

NOTE:

• The V-Chip function is activated only on programs and input sources that include a rating signal.

To change the password

1

Press SETUP/TV MENU in the TV mode.The

TV menu screen will appear.

2

Press • or • to select "Lock", then press • or

ENTER.

3

Use Number buttons (0-9) to enter your password, then press ENTER.

The Lock menu will appear.

4

Press • or • to select "Change Password", then press • or ENTER.

The Change Password screen will appear.

5

Enter a new password using Number buttons

(0-9), then press ENTER.

6

Enter the same password again to confirm, then press ENTER.

The password is now registered.

Downloading the additional V-Chip rating system

As a supplement to the standard V-Chip rating system, your television will be able to download an additional rating system, if such a system becomes available in the future.

19

To download the additional V-Chip rating system

(when available)

1 Press SETUP/TV MENU while on a digital channel.

2

Press • or vtoselect"Lock",then

ENTER.

press • or

3

Use Number buttons (0-9) to enter your password, then press ENTER. The Lock menu will appear.

4

Press • or to select "V-Chip Set (DTV)", then press • or ENTER,

5

If the TV is not storing the additional rating system, the TV will begin downloading it, which may take some time to be completed.

6

Set your preferred content rating limits for the additional rating system.

7

You also need "Update" procedure to update rating information.

NOTE:

• You can only download the additional V-Chip rating system when your TV is receiving a digital signal.

• When you download the additional rating system, it may take some time for the download to occur.

• The V-Chip rating information and system are not determined or controlled by the TV.

• The standard V-Chip rating system is available whether your TV is receiving a digital signal or not, and will block both analog and digital programs.To

set the restriction level using the standard V-Chip rating system, select V-Chip Set in step 4.

• The downloadable V-Chip rating system is an evolving technology, and availability, content, and format may vary.

• You cannot select this feature if theTV is not receiving a digital signal for the current station.

To clear the all V-Chip settings

1

Press SETUP/TV MENU in the TV mode.The

TV menu screen will appear.

2

Press • or • to select "Lock", then press • or

ENTER.

3

Use Number buttons (0-9) to enter your password, then press ENTER.

The Lock menu will appear.

4

Press • or • to select "V-Chip Clear", then press

• or ENTER.

The Password screen will appear.

5

Use Number buttons (0-9) to enter your password, then press ENTER.

All your settings return ro the factory settings.

Closed Caption

WHAT IS CLOSED CAPTIONING?

This television has the capability to decode and display Closed Captioned television programs.

Closed

Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in another language.

Captions: This Closed Caption Mode will display text on the screen in English or another language.

Generally, Closed Captions in English are transmitted on C1 and Closed Captions in other languages are transmitted on C2.

Text: The Text Closed Caption Mode will usually fill

1/2 of the screen with a programming schedule or other information.

1

Press SETUP/TV MENU in the TV mode.The TV menu screen will appear.

2

Press • or • to select "Setup", then press • or

ENTER.

3

Press • or • to select "Closed Caption", then press • or ENTER.

The Closed Caption menu will appear.

4

Press • or • to set "CC Setting" to "On".

On: Captions will be displayed on the screen.

Off: Captions will not be displayed on the screen.

5

Press • or • to select "Analog Caption" or "Digital

Caption".

When you select "Analog Caption", you can choose C1, C2, C3, C4, T1, T2, T3 and T4.

When you select "Digital Caption", you can choose from CS1, CS2, CS3, CS4, CS5 and CS6.

6

Press • or • to select the desired Closed

Caption mode for both Digital and Analog

Caption.

7

Press • or • to select "CC Priority", then press

4 or • to select "Digital CC" or "Analog CC".

NOTE:

• Depending on the broadcast signal, some

Analog Captions will function with a Digital broadcast signal. This step prevent that two kind of captions are overlapping.

8

Press EXIT/CANCEL to return to the normal screen.

NOTE:

• If the program or video you selected is not closedcaptioned, no captions will display on-screen.

• If text is not available in your viewing area, a black rectangle may appear on-screen.

If this happens, set the CC Setting to "Off".

• When selecting Closed Captions, the captioning will be delayed approx.

10 seconds.

• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.

• Misspellings or unusual characters may occasionally appear during Closed Captioning.

isnormal with programs, transmissions

• When displays, butmay with and entered

Closed

These

Captions.

protection theClosed anindoor theClosed

Captioned orifTVreception

Decoder not ormay misspelled forbetter

CC advanced

When you have selected Custom as the display method, you can adjust the various setting listed below as follows:

This feature is designed to customize Digital Captions only.

1

Press SETUP/TV MENU in the digital channel.

The TV menu screen will appear.

2

Press • or to select"Setup", then press • or

ENTER.

3

Press • or • to select"CIosed Caption", then press • or ENTER.

The Closed Caption menu will appear.

4

Press • or • to select"Digital CC Preset", then press • or • to select "Custom".

5 Press • or • to select "CC Advanced", then press • or ENTER.

The CC Advanced menu will appear.

6

Press • or • to select the desired item, then press • or • to change the setting.

/ Press EXIT/CANCEL screen.

to return to the normal

NOTE:

• You cannot set both "Text Color" and "Background

Color" as a same color.

• You cannot set both "Text Opacity" and "Background

Opacity" to "Transparent".

Adjusting the picture preference

You can select four picture modes--Sports,

Standard, Movie and Memory--as described in the following table:

1

Press SETUP/TV MENU in the TV mode.The

TV menu screen will appear.

2

Press • or • to select"Picture", then press • or

ENTER.

3

Press • or • to select"Picture Preference".

4

Press 4 or • to select a mode you want to adjust.

Mode

Sports

Standard

Movie

Memory

Picture Quality

Bright and dynamic picture (factory-set)

Standard picture quality (factory-set)

Movie-like picture setting (factory-set)

Your personal preferences (set by you; see "Picture control adjustment" below).

5

After your desired setting, press EXIT/CANCEL to return to the normal screen.

You can select from among the following items and parameters.

Text Size:

Text Type:

Text Edge:

Auto, Small, Standard, Large

Auto, Style1, Style2, Style3, Style4,

Style5, Style& Style7

Auto, None, Raised, Depressed,

Uniform, Left Shadow, Right

Shadow

Text Color: Auto, Black, White, Red, Green,

Blue, Yellow, Magenta, Cyan

Text Opacity: Auto, Solid, Transparent,

Translucent, Flashing

Background

Color:

Auto, Black, White, Red, Green,

Blue, Yellow, Magenta, Cyan

Background

Opacity:

Auto, Solid, Transparent,

Translucent, Flashing

Picture control adjustment

1

Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.

2

Press • or • to select "Picture", then press • or

ENTER.

3

Press • or • to select "Picture Setting", then press • or ENTER.

The Picture Setting menu will appear.

4

Press • or • to select the item you want to adjust.

Press 4 or • to adjust the setting.

21

,_ After adjusting, press ENTER to return to the

Picture Setting menu. Then continue to adjust the other items.

Selecting the picture size

1

Press SETUP/TV MENU in the TV mode.The

TV menu screen will appear.

2

Press • or • to select "Picture", then press • or

ENTER.

3

Press • or • to select "Picture Size", then press

• or ENTER to display Picture Size menu. Press

/• or corresponding Number buttons (0-4) to select the desired picture size, as described below.

Brightness

Contrast

Sharpness

Color

Tint decrease brightness decrease contrast makes picture softer increase brightness increase contrast makes picture clearer be pale color be brilliant color be reddish color be greenish color

O After your desired setting, press EXIT/CANCEL to return to the normal screen.

NOTE:

• The Contrast default setting is set to maximum at the factory.

Selecting

the color temperature

1

Press SETUP/TV MENU in the TV mode. The TV menu screen will appear.

2

Press • or to select "Picture", then press • or

ENTER.

3

Press • or • to select "Picture Setting", then press • or ENTER.

The Picture Setting menu will appear.

4

Press • or • to select "Color Temperature", then press • or • to change the setting.

NOTE:

• Selectable picture sizes may vary depending on the input source or broadcast signal.

• Picture Size menu also can be displayed by pressing SCREEN SIZE on the remote control.

4

Press EXIT/CANCEL to return to the normal screen.

Natural

In some cases, this image will display the size of standard 4:3 with a black side bar.

Cinema Wide1 (for 4:3 format programs)

To fill the screen, the right and left edges are extended, however; the center of the picture remains near its former ratio.

The top and bottom edges of the picture may be hidden.

_

Bluish

Neutral icture Quality

Reddish

5 Press EXIT/CANCEL screen.

to return to the normal

Setting the picture size

You can view 480i and 480p format programs in a variety of picture sizes-Natural, Cinema Wide1,

Cinema Wide2, Cinema Wide 3, Full and Native.

Cinema Wide2 (for letter box programs with subtitles)

To fill the width of the screen, it is extended horizontally.

However; it is only slightly extended at the top and the bottom.

The top and bottom edges of the picture may be hidden.

Cinema Wide3 (for letter box programs with subtitles)

To fill the width of the screen, it is extended horizontally.

However; it is only slightly extended at the top and the bottom.

The top and bottom edges of the picture may be hidden.

,I Press SETUP/TV MENU.

The TV menu screen will appear.

3

Press • or • to select"Picture", then press • or

ENTER.

4

Press • or • to select"PC Setting", then press • or ENTER.

The PC Setting menu will appear.

Full (for 16:9 source programs)

Full will display the picture at the maximum size.

Native (for PC mode only)

Detects the resolution of the signal of the image and it will be shown on the screen with same amount of pixels.

NOTE:

• Some High Definition and/or Digital broadcasts may not allow you to change the picture size.

• In HDMI or COMPONENT mode with a scanning rate of 720p or 1080i, only the Cinema Wide2 and

Full picture size feature is available.

• In PC Mode, only the Natural, Full and Native picture size features are available.

In PC Mode

(WXGA), only the Full and Native picture size features are available.

Film mode

A smoother motion may be obtained by setting

the Film Mode to "On" when you view a DVD.

|

=4

Press SETUP/TV MENU in the TV mode.The

TV menu screen will appear.

2

Press • or to select"Picture", then press • or

ENTER.

3

Press • or • to select"Film Mode".

Press < or • to select "On" or "Off".

4

Press EXIT/CANCEL to return to the normal screen.

Picture control adjustment in the PC mode

You can adjust to optimize the performance

the TV in the PC mode.

1

Press INPUT SELECT, then press •/• or

Number button (6) to select the PC mode.

of

Press•or• to adjust.

to select the desired item you want

Press<or• to adjust the setting.

Hor

Position:

Vet

Position:

Clock:

To adjust the horizontal position of the image on the PC mode.

To adjust the vertical position of the image on the PC mode.

To minimize any vertical bars or stripes visible on the screen background.

Phase: This must be adjusted after the frequency of the PC mode has been set to 60Hz to optimize picture quality (page 39).

Auto Adjust:To adjust the all PC settings automatically

7

After adjusting, press ENTER to return to the PC

Setting menu. Then continue to adjust the other items.

8

Press EXIT/CANCEL to return to the normal screen.

NOTE:

• Auto Adjust feature is available only for 16:9 or 4:3 format.

• If no buttons are pressed for more than approx. 60 seconds, the Menu-screen will return to normal

Monitor-screen automatically.

• The PC settings are not effective for other input modes.

DNR

DNR (Digital Noise Reduction) can reduce the roughness of the picture.

1

Press SETUP/TV MENU in the TV mode.The

TV menu screen will appear.

2

Press • or • to select"Picture", then press • or

ENTER.

Press • or • to select"DNR".

Press • or • to select "On" or "Off".

4

Press EXIT/CANCEL to return to the normal screen.

23

Sound control adjustment

1

2

Press SETUP/'rv MENU in the TV mode. The TV menu screen will appear.

Press • or to select"Audio", then press • or

ENTER.

3

Press • or • to select the item you want to adjust.

Bass:

Treble:

Press • or • to adjust the bass sound.

Press • or • to adjust the treble sound.

Balance: Press • or • to obtain an equal sound level from both speakers.

Surround:

Press • or • to select "On" or "Off".

On: The dynamic presence and sound created offers a thoroughly enjoyable listening experience.

Off: Normal sound.

¢-I" After you desired setting, press EXIT/CANCEL return to the normal screen.

to

Selecting Stereo/Second

Audio Program (SAP)

The multi-channel TV sound (MTS) feature provides high-fidelity stereo sound.

MTS also can transmit a second audio program (SAP) containing a second language or other audio information.

When the TV receives a stereo or SAP broadcast, the word "Stereo" or "SAP" displays on-screen every time you press DISPLAY.

1

Press SETUP/TV MENU in the TV mode.The

TV menu screen will appear.

2

Press • or • to select"Audio", then press • or

ENTER.

3

Press • or • to select"MTS", then press 4 or • to select "Stereo".

Press EXIT/CANCEL to return to the normal screen.

NOTE:

• Generally you can leave your TV in stereo mode because the TV automatically outputs the type of sound being broadcast (stereo or mono).

• If the stereo sound is noisy, select "Mono" to reduce the noise.

To listen to a second audio program (SAP)

Press • or • to select "SAP" in step 3 above.The

TV speakers will output the second audio program instead of normal audio.

Selecting

the audio language

When two or more audio languages are included

in a digital signal, you can select one of the audio languages.

(This function is available only for digital broadcast.)

1

Press SETUP/TV MENU in the digital channel.

The TV menu screen will appear.

2

Press • or • to select"Audio", then press • or

ENTER.

3

Press • or • to select"Audio Language", then press • or ENTER to display the Audio Language menu.

4

Press •/v or Number buttons (0-6) to select your desired language.

•._

Press EXIT/CANCEL to return to the normal screen.

Selecting the HDMI audio input source

When you use PC/DVI AUDIO IN jack with HDMI or DVI device, you must select HDMI audio input source from "HDMI" or "DVI'.

|

4

Press SETUP/TV MENU menu screen will appear.

in the TV mode.The

TV

Press • or to select "Audio", then press • or

ENTER.

3

Press • or • to select"HDMI 1 Audio".

Press < or • to select "HDMr' or "DVI".

HDMh When you connect the HDMI device to the TV, select this setting.

DVh When you connect the DVI device to the

TV with analog audio cords, select this setting.

4

Press EXIT/CANCEL to return to the normal screen.

Turning off the built-in speakers

Use this feature to turn the TV speakers off when you connect an audio system (see pages 39).

1

Press SETUP/TV MENU.The

menu screen will appear.

2

Press • or • to select"Audio", then press • or

ENTER.

Press • or • to select "Speakers".

Press < or • to select "Off".

4.

Press EXIT/CANCEL screen.

to return to the normal

NOTE:

If "Off" is selected, "Speakers Off" will be displayed on the screen when the volume is changed.

To turn on the built-in speakers:

Select "On" in step 3 above.

Adjusting the back lighting

The Backlight feature adjusts the screen brightness for improved picture clarity.

1

Press SETUP/TV MENU in the TV mode.The

TV menu screen will appear.

Press • or • to select "Picture", then press • or

ENTER.

3

Press • or • to select"Picture Setting", then press

• or ENTER.The Picture Setting menu will appear.

4

Press • or • to select"Backlight".

5 Press < or • to adjust the setting.

6

Press EXIT/CANCEL to return to the normal screen.

Checking the digitalsignal strength

This TV will allow you to view the digital signal meter for digital channels.

1

Press SETUPFrV MENU in the TV mode.The

TV menu screen will appear.

2

Press • or • to select"Channel", then press • or

ENTER.

3

Press • or • to select"DTV Signal".

4

Press ENTER to check the Digital-signal strength.

•._

Press EXIT/CANCEL to return to the normal screen.

NOTE:

• Signal meter feature is not available for analog channels.

• After 240 seconds, Signal Meter screen will return to normal TV-operation automatically.

Setting the auto shut off

If the Auto Shut Off feature is On, a station being viewed stops broadcasting and the TV is not operated, the TV will automatically shut itself off after 15 minutes.

/

4

Press SETUP/TV MENU menu screen will appear.

in the TV mode.The

TV

Press • or • to select "Setup", then press • or

ENTER.

3

Press • or • to select"Auto Shut Off".

Press < or • to select "On" or "Off".

4Press EXIT/CANCEL screen.

to return to the normal

25

Resetting your settings

The Reset function returns your settings to the factory settings.

1

Press SETUP/TV MENU in the TV mode.The

TV menu screen will appear.

then press _,- or Press • or to select"Setup",

ENTER.

3 Press • or • to select"Reset".

¢--I" Press _,-or ENTER to return your settings to the factory settings.

,_ "Reset" will appear on the screen approx.

3 seconds, then it returns to the normal screen.

Preparation

The following pages describe the setup/ operation in DVD mode.

Preparation

Before DVD/CD operation, please make the following preparations.

1 Insert the AC cord plug into a standard 120V

60Hz polarized AC outlet.

• If the AC cord plug is plugged in for the first time, wait for about 5 seconds before pressing

POWER.

NOTE:

• When connecting to other equipment, unplug the unit from the AC outlet.

2 Press POWER on the unit or on the remote control to turn on the unit.The

POWER indicator will change to green.

• Each time you turn the unit ON, the TV/DVD starts from the TV mode.

• When using an amplifier, switch on the amplifier.

Press TV/DVD to select DVD mode.

The DVD startup screen will appear on the screen.

NOTE:

• "Picture Size" in Picture menu cannot be reset by this function.

• "MTS", "Audio Language" and "HDMI 1 Audio" in

Audio menu cannot be reset by this function.

NOTE:

If the unit does not operate properly:

Static electricity, etc., may affect the player's operation.

Disconnect the AC power cord once, then connect it again.

Status

display of disc

Press DISPLAY. The status display of the disc will appear on the screen.

ELAPSED TOTAL

DiSC OPERATION TiME TiME

AUDIO LANGUAGE A KiND OF AUDIO

To make the status display screen disappear, press

DISPLAY again.

Playback procedure

1

2

Press TV/DVD to select DVD mode.

Place the disc in the disc slot with the label side facing forward.

(If the disc has a label.)

Hold the disc without touching either of its surfaces, align it with the guides, and place it in position.

Onthescreen, then

• Amenu press screen ifthedisc

A,v,4,_,feature.

4

Press STOP to end playback.

• The unit memorizes the stopped point, depending on the disc. "IW" appears on the screen.

Press PLAY to resume playback (from the scene point).

• If you press STOP again ("1" appears on the screen) or unload the disc, the unit will clear the stopped point.

_3 Press __(EJECT).

Remove the disc and then press POWER.

The unit turns off.

When you eject the disc, you may hear mechanism noise, but it is not malfunction.

NOTE:

• If a non-compatible disc is loaded, "Incorrect Disc",

"Region Code Error" or "Parental Error" will appear on theTV screen according to the type of loaded disc. If these appear, check your disc again (see pages 8 and 34,35).

• Some discs may take a minute or so to start playback.

• If an 8 cm disc is placed into the disc slot and picture playback or menu display does not begin automatically, press PLAY.

• A "Prohibition" symbol "X" may appear at the upper right of the screen. This symbol means either the feature you tried is not available on the disc, or the unit cannot access the feature at this time. This does not indicate a problem with the unit.

• If you place a single-faced disc label backwards (i.e.

the wrong way) "Reading" will appear in the display and then "Incorrect Disc" will be displayed.

• Some playback operations of DVDs may be intentionally fixed by software producers.

Since this unit plays DVDs according to the disc content recorded, some playback features may not be available.

Also refer to the instructions supplied with the DVDs.

Special playback

Fast Forward Playback

Press SEARCH I_" during normal playback.

Each press of SEARCH I_ will increase the speed of the search I1_ (x 2), _

15).

(CD: _ (x 2), _ (x 4), _

(x 4), _ (x 8), _

(x 8), _ (x 20))

(x

• To resume normal playback, press PLAY.

Review Playback

Press SEARCH _ during normal playback.

Each press of SEARCH _ will increase the speed of the search _

(x 15).

(x 2), _ (x 4), _ (x 8),

(CD: _ (x 2), _ (x 4), _ (x 8), _ (x 20))

• To resume normal playback, press PLAY.

Still Playback

Press PAUSE/STILL during normal playback to pause playback.

To resume normal playback, press PLAY.

Frame Advance

Press PAUSE/STILL during still playback.

One frame is advanced each time you press PAUSE/

STILL.

• To resume normal playback, press PLAY.

Slow-motion Playback

Press SLOW 41 Reverse or SLOW I_ Forward during normal playback or still playback.

Each press of SLOW will change the speed of the slow xl/2, xl/4, xl/6, xl/7.

• To resume normal playback, press PLAY.

• To resume the still playback, press PAUSE/STILL

Locating a chapter or track

Press SKIP _ Forward or SKIP _ Reverse during playback to locate a chapter that you want to watch.

Each time you press the button, a chapter or track is skipped.

NOTE:

• The unit is capable of holding a still video image or

On screen display image on your television screen indefinitely.

If you leave the still video image or On screen display image displayed on your TV for an extended period of time, you risk permanent damage to your television screen.

• There may be a slight delay between when you press the button and the function activating.

MP3/WMA/JPEG and

Audio CD playback

This player can play back MP3/WMA/JPEG-data which has been recorded on CD-R or CD-RW.

To produce MP3/WMA/JPEG-data, you need a

Windows-PC with CD-ROM drive and MP3/WMA/

JPEG-encoding software (not supplied).

The Apple-HFS-System cannot be played.

MP3/WMA/JPEG CD information

Limitations on MP3/WMA/JPEG

• MP3/WMA/JPEG

CD playback

CD is the disc that is standardized by ISO9660, its file name must include 3-digit extension letters, "mp3", "wma", "jpg".

• The directory and file names of MP3!WMA/JPEG

CD must correspond to ISO standardized files.

• This unit can read 2000 files per disc. If one directory has more than 2000 files, it reads up to

2000 files, the remaining files will be omitted.

• MP3!WMA

CDs cannot be used for playback for the purpose of recording.

• It may take more than one minute for this unit to read MP3/WMA/JPEG structure.

files depending on its

27

Music recorded by'Uoliet Recording Specification" can be played back.

• The music files recorded by "Hierarchical File

System" (HFS) cannot be played.

• The unit can play back baseline and progressive

JPEG files.

Limitations on display

• The maximum number for display is 15 characters.

Long file names will be condensed.

• Available letters for display are the following: capital or lowercase letters A through Z, numbers 0 through 9, and (underscore).

• Other letters than those above are replaced by a hyphen.

Notes on MP3/WMA/JPEG files

To play back MP3/WMA/JPEG order,

1. Use MP3!WMA/JPEG

CD in the recorded software that records data alphabetically or numerically.

2. Name each file including a two-digit or three-digit number (e.g. "01" "02" or "001" "002").

3. Refrain from making too many sub-folders.

CAUTION:

• Some MP3/WMA/JPEG CDs cannot be played back depending on the recording conditions.

• The CD-R/RW that has no music data or non-MP3/

WMA/JPEG files cannot be played back.

MP3/WMA/JPEG CD and Audio CD playback:

1

Load a MP3/WMA/JPEG CD or an Audio CD in the disc slot.

2

"Reading" will appear on the TV screen. Reading time will depend on the number of files on the disc.

_._

A file browser screen will appear on the TV screen.

Operation status File number Elapsed time Selected file name

4

Press • or • to select the desired file.

When PLAY is pressed after displaying file browser displayed, playback begins automatically starting from the first file.

In this case, if the first file is an MP3!WMA

file, only MP3/WMA files are played back in order. If the first file is a JPEG file, the first JPEG file is played back. If there is no file at a root directory, playback does not begin automatically.

5

Press ENTER.

The selected file starts playing back.

6

Press STOP to end playback.

• The unit records the stopped point. "IU" appears on the screen.

Press PLAY to resume playback (from the scene point).

• If you press STOP again or unload the disc, the unit will clear the stopped point.

NOTE:

• During MP3/WMA/JPEG-Playback, use JUMP and A-B Repeat functions.

you cannot

• You can use Program playback, Repeat (Track or All) and Random functions fer MP3/WMA/

JPEG and Audio CD Playback (see pages 29 and 30).

JPEG playback:

In the file browser, press•/•

JPEG file.

to select the desired

To display a thumbnail list, press DVD MENU.

Press •/v/_l/, to select the desired file.

(To return to the file browser, press TOP MENU.)

File list

Cursor i ,

Preview window i

File type

,,b : Indicates Music file (Audio CD/MP3/WMA)

[] : Indicates Picture file (JPEG)

• In case the current directory includes 9 files or more, press • or to scroll in the file list.

• To see contents in folder, select the folder and then press ENTER.

To return to the parent directory, select "i_ Go Up ..." then press

ENTER.

• In case of a CD containing a mixture of MP3,

WMA and JPEG files, the files are played back by selecting them from the file browser.

2

Press ENTER or PLAY.

The selected picture appears on the TV screen.

Rotating an image

You can rotate an image by 90 degrees.

Press ANGLE during playback of the image.

"lJ-", "ill=", "'_11" or "_" appears on the screen.

Zooming an image

Zoom function also can be used in viewing JPEG files.

Press ZOOM (See "Zooming" on page 30).

3

Press STOP to end playback.

The file browser appears on the TV screen.

If you want to watch the other file, repeat steps 1-2.

A

Select Files

The file type to make it display in the file browser can be chosen.

1

Press 41/=,-to select "Select Files" at right column in the file browser.

• Press ENTER, then press •/v to select file type from the list (Music or Picture).

Press ENTER to add/remove check mark.

Checked file type will be displayed in the file browser.

Press RETURN to save the setting.

Setting the JPEG interval

play back all JPEG files You can continuously automatically.

1

Press SETUP/'I'V MENU in the stop mode.

Press • or to select [] option, then press </_,- or ENTER.

2 Press • or • to select'UPEG Interval", then press

_,- or ENTER.

3

Press • or • to select your desired time, then press ENTER.

2

Press •/•/_1/I,to select the file you want to add into the program list.

Press ENTER. Selected file was marked.

Repeat this procedure to select the other files.

3

Press •/•/_I/D,to select "Add To Program".

Then press ENTER. All marked files are added into the program list.

When you finish storing the files you want into the

Program list, select "Edit Mode" again and press

ENTER to release edit mode.

Display

Picture Mode

: On

:Auto

TV Screen : 16:9

Off:

Plays back one file at a time.

5 Seconds:

Plays back images in the form of a slide show at 5 second intervals.

10 Seconds:

Plays back images in the form of a slide show at

10 second intervals.

15 Seconds:

Plays back images in the form of a slide show in

15 second intervals.

4

Press SETUP/TV MENU to remove the menu screen.

Program playback (CD)

You can arrange the order of tracks on the disc.

1

In the file browser, press •/•/,/D, to select"Edit

Mode", then press ENTER.

When "Edit Mode" is black color, you can mark the files which you want to add into Program list.

4

Press •/• to select"Program View", then press ENTER.

Program View shows only the programmed files that you have added in Step 2.

Browser View Program View

,_ In the Program View, press PLAY. The files start to playback in programmed order that were added by you.

To remove file from program list in stop mode

In the Edit Mode, switch to Program View. Select the files you want to remove, then press ENTER.

Select

"Clear Program" and press ENTER.

Marked file is removed from program list.

NOTE:

• The program is cancelled when you eject the disc or turn the power off.

29

Repeat playback (CD)

1

In the file browser, press A/v/_l/_ to select

"Repeat".

2

Press ENTER repeatedly to select"Track" or"All".

,I Press •/v/_l/_ frame.

to view a different part of the

You may move the frame from the center position

UP, DOWN, LEFT or RIGHT.

In the zoom mode press ZOOM repeatedly to return to a 1:1 view (O_ Off).

NOTE:

• You can select the Pause, Slow or Search playback in the zoom mode.

• Some discs may not respond to zoom feature.

Locating desired scene

Use the title, chapter and time recorded on the disc to locate the desired point to play back.

1

Press JUMP during playback or stop mode.

3

Press PLAY.

The unit automatically starts repeat playback after finishing the current track.

To resume normal playback, select Repeat :"Off" in step 2.

NOTE:

• The repeat or random function is canceled when you eject the disc or turn the power off.

• The track repeat function is canceled when SKIP or I,.I,.I is pressed.

• In case of Audio CD, the function of A-B Repeat also can be used (See "A-B Repeat playback" on page 31 ).

Random playback (CD)

1

In the file browser, press A/v/_l/_ to select

"Mode".

2

Press ENTER to select"Random".

[

Title

Chapter

Time

Jump

---

---

--:--:--

]

2

Press • or to select the "Title", "Chapter" or

"Time".

3

4

Press Number buttons (0-9) to input the number.

• If you input a wrong number, press CANCEL.

• Refer to the package supplied with the disc to check the numbers.

Press ENTER.

• Playback starts.

• When you change the title, playback starts from

Chapter 1 of the selected title.

• Some discs may not work in the above operation.

3

Press PLAY.

The Random playback will start.

To resume normal playback, select Mode :"Off" in step 2.

Zooming

This unit will allow you to zoom in on the frame image.You

can then make selections by switching the position of the frame.

1

Press ZOOM during playback.

The center part of the image will be zoomed in.

Each press of ZOOM will change the ZOOM magnification O,,1 (x 1.3), 0,,2 (x 1.5) and Q, 3

(x 2.0).

Repeat playback

Title, Chapter Playback:

1

Press PLAY MODE during playback or stop mode.

2 Press ENTER repeatedly to select"Chapter"

"Title".

The unit automatically starts repeat playback or after finishing the current title or chapter.

• If you set the repeat mode during stop mode, press PLAY to start Repeat playback.

3

Press PLAY MODE again to make the screen disappear.

• In stop mode, press PLAY to start Repeat playback.

• To resume normal playback, select Repeat

"Off" in step 2.

A-BRepeat

A-B playback twoselected

1

Press REPEAT A-B during playback.

The start point is selected.

Returning to the scenes:

1

Press MARKER during playback or stop mode.

2

Press • or to select the Marker 1-3.

2

Press REPEAT A-B again.

The end point is selected.

Playback starts at the point that you selected.

Playback stops at the end point, returns to Point A automatically, then starts again.

3

To resume normal playback press REPEAT A-B again.

",.._..,

appears on the screen.

NOTE:

• Some discs may not work with the repeat operation.

• In A-B repeat mode, subtitles near point A or B may not appear.

• During the A-B Repeat Playback the ANGLE feature will not operate.

• You may not be able to set A-B Repeat, depending on the scenes of the DVD.

• A-B Repeat does not work with an interactive DVD,

MP3/WMA/JPEG-CD.

Marking desired scenes

The TV/DVD stores the points that you want to watch again,You can resume playback from that scene,

Marking the scenes:

1

Press MARKER during playback.

2

Select the blank Marker using • or v, then press

ENTER at the desired scene.

Marker2 : :

]

01:16:25] [ Marker 2

I Marker1 ]

3

Press ENTER.

Playback starts from the marked scene.

To cancel the mark:

1

Press MARKER during playback or stop mode.

2

Press • or • to select the Marker 1-3.

3

Press CANCEL.

Press MARKER to remove this display.

NOTE:

• The marking is canceled when you eject the disc or turn the power off.

• Some subtitles recorded around the marker may fail to appear.

[DVD]

Changing soundtrack language

You can select the language when you play a multilingual disc.

1

Press AUDIO during playback.

The current soundtrack language will appear.

2

Press AUDIO repeatedly until the desired language is selected.

The on-screen display will disappear after a few seconds.

NOTE:

• If the desired language is not heard after pressing

AUDIO several times, the language is not recorded on the disc.

• Changing soundtrack language is cancelled when you eject the disc.

The initial default language or available language will be heard if the disc is played back again.

• Up to 3 scenes can be selected.

• Repeat this procedure to set the other 2 scenes.

3

Press MARKER to remove this display.

31

Subtitles

Turning the subtitles on and off

When playing back a disc recorded with subtitles, you can turn the subtitles on or off.

Press SUBTITLE during playback until "Off" appears.

Changing the subtitle language

You can select the language when playing back a disc recorded with multilingual subtitles.

1

Press SUBTITLE repeatedly during playback until your desired language appears.

/ The on-screen display will disappear after a few seconds.

NOTE:

• Changing subtitle language is cancelled when you eject the disc.

• Some functions may not work on some DVDs.You

may not be able to turn subtitles on or off or change subtitles.

While playing the DVD, the subtitle may change when:

- you eject the disc.

- you change the title.

• In some cases, the subtitle language is not changed to the selected one immediately.

Changing angles

When playing back a disc recorded with multiangle facility, you can change the view angle.

1

Press ANGLE during playback.

The current angle will appear.

Title selection

2

3

Two or more titles are recorded on some discs.

If the title menu is recorded on the disc, you can select the desired title.

1

Press TOP MENU during playback.

Title menu appears on the screen.

Press •/v or </D, to select the desired title.

Press ENTER or PLAY.

The playback of the selected title will start.

NOTE:

Depending on the DVD, you may not be able to select the title. Depending on the DVD, a "title menu" may simply be called a "menu" or "title" in the instructions supplied with the disc.

DVD menu

Some DVDs allow you to select the disc contents using the menu.

When you playback these DVDs, you can select the subtitle language and soundtrack language,

etc. using the DVD menu.

1

Press DVD MENU during playback.

The DVD menu appears on the screen.

• Press DVD MENU again to resume playback at the scene when you pressed DVD MENU.

2

Press •/v or 4/_, to select the desired item.

3

Press ENTER.

The menu continues to another screen.

Repeat steps 2 and 3 to set additional items if any.

Setting

the language

You can select the language of "Menu", "Subtitle" and "Audio" if more than recorded onto the disc.

one languages are

1

Press SETUP/TV MENU in the stop mode.

Press • or to select [] option, then press </, or ENTER.

2

Press • or • to select desired option, then press or ENTER.

3

Press • or • to select your desired language

(e.g. English), then press ENTER.

/ Press ANGLE repeatedly until the desired angle is selected.

NOTE:

• Depending on the DVD, you may not be able to change the angles even if multi-angles are recorded on the DVD.

English, Francais, Espanol :

The selected language will be heard or seen.

Other:

Other language can be selected (see the

"Language code list" on page 36).

Original (Audio):

The unit will select the first priority language of each disc.

Off (Subtitle):

Subtitles do not appear.

4

Press SETUP/TV MENU to remove the menu screen.

NOTE:

• If the selected language is not recorded on the disc, the first priority language is selected.

Setting

the aspect ratio of TV screen

You can select the aspect ratio of the picture,

1

Press SETUP/TV MENU in the stop mode or No

Disc.

Press • or to select [] option, then press _l/• or ENTER.

2 Press • or • to select"TV Screen", then press • or ENTER.

3 Press • or • to select your desired screen type, then press ENTER.

You have the following screen sizes to choose from:

4:3 r'-I Letterbox

When playing back a wide screen DVD disc, it displays the wide picture with black bands at the top and bottom of screen.

4:3 E1 Panscan

It displays the wide picture on the whole screen with left and right edges automatically cut off.

16:9 _ Wide

A wide screen picture is displayed full size.

4

Press SETUP/TV MENU to remove the menu screen.

NOTE:

• It is not always possible for the DVD disc to display the picture as per your preferred picture setting - for example, if you select "4:3 Panscan", the disc may not offer this option.

In this case the picture would display the format the disc is capable of playing back.

Setting

on screen display

On screen display can be switched on or off when you press the any button.

1

Press SETUP/TV MENU in the stop mode or No

Disc.

Press • or • to select [] option, then press _l/• or ENTER.

2

Press • or • to select "Display", then press • or

ENTER.

3

Press • or • to select "On" or "Off", then press

ENTER.

JPEG Interval

TV Screen

:Off

16:9_

On: On screen displays appear when you press the buttons (factory setting).

Off: On screen displays do not appear when you press any buttons except SUBTITLE, PLAY

MODE, MARKER, DISPLAY, AUDIO and

JUMP.

4

Press SETUP/TV MENU to remove the menu screen.

Setting

the picture mode

There are two types of source content in pictures recorded in DVD video discs: film content

(pictures recorded from films at 24 frames per second) and video content (video signals recorded at 30 frames per second).

Make this selection according to the type of content being viewed,

Press SETUP/TV MENU in the stop mode or No

Disc.

Press • or • to select [] option, then press ,/• or ENTER.

2

Press • or • to select "Picture Mode", then press

• or ENTER.

3

Press • or • to select your desired picture mode, then press ENTER.

Display

TV Screen

:On

:16:9_

33

Auto:

Select this position normally.

The DVD player automatically detects source content, film or video, of playback source.

Film:

Suitable for playback of film content pictures.

Video:

Suitable for playback of video content pictures.

4

Press SETUP/TV MENU to remove the menu screen.

NOTE:

• Depending on the disc, pictures may be cut off or doubled.

In this case, select "Video".

Night mode

Night Mode enables you to control the dynamic range so as to achieve a suitable sound for your equipment.

1

Press SETUP/TV MENU in the stop mode or No

Disc.

Press • or to select !j5

option, then press

4/• or ENTER.

2

Press • or • to select "Night Mode", then press

• or ENTER.

3

Press • or • to select "On" or "Off", then press

ENTER.

On : Loud sounds such as explosions are toned down slightly when played.

Off : The unit will play the disc as recorded.

/I t-I.

Press SETUP/TV MENU to remove the menu screen.

4

Off:

PCM:

Bitstream:

There is no sound output from

DIGITAL AUDIO OUT jack.

Change Dolby Digital to PCM for the output.

Select when connected to a 2 channel digital stereo amplifier.

Disc audio bitstream data will be output.

Press SETUP/TV MENU to remove the menu screen.

NOTE:

• This function works only during playback of Dolby

Digital recorded discs.

• The level of Dynamic Range Reduction may differ depending on DVD video disc.

• Even if you select "Bitstream", MPEG audio will be output in PCM format.

Parental control

Some discs are specified not suitable for children.

Such discs can be limited not to play back with the unit.

Password and setting:

Press SETUP/TV MENU in the stop mode or No

Disc.

Press • or • to select $_t option, then press

4/• or ENTER.

,I Press • or • to select"Parental",

ENTER.

then press

"Enter Password" screen will appear.

• or

Press "0000" using Number buttons (0-9).

(This is pre-setting password of this unit). Then press

ENTER.

• If you input a wrong number, press CANCEL.

Digital out

You can select the digital output sound format corresponding to your system connection.

1

Press SETUP/TV MENU in the stop mode or No

Disc.

Press • or • to select {ij5 option, then press

4/• or ENTER.

2

Press • or • to select "Digital Out", then press • or ENTER.

3

Press • or • to select "Off", "PCM" or "Bitstream", then press ENTER.

./i

¢-'1" The parental level list will appear.

Press • or • to select the level 1 to level 8. The limitation will be more severe as the level number is lowered. Then press ENTER.

parental notfunction.

• Level allDVD played software played level back.

severe

8.The

asthelevel

SETUP/TV screen.

NOTE:

If each setup (P.32~35) has been completed, the unit will use these settings during DVD playback.

Each setup will be retained in memory.

• Depending on the discs, the unit may not be able to limit playback.

• Some discs may not be encoded with specific rating level information though its disc jacket says "adult".

For those discs, the age restriction will not work.

• After the rating is locked, the setting cannot be changed unless you enter the correct password.

Setting the new password:

"1 Press SETUP/TV MENU in the stop mode or No

Disc.

Press • or to select _j option, then press

4/I, or ENTER.

2 Press • or • to select"Password", or ENTER.

then press

"Enter Current Password" screen will appear.

Press Number buttons (0-9) to enter the password you have stored.

• If you input a wrong number, press CANCEL.

4" Then press ENTER.

"Enter New Password" screen will appear.

Press Number buttons (0-9) to input the new password.

Temporary disabling of

rating level by DVD disc

Some pre-recorded DVD discs may attempt to temporarily cancel the rating level that you have set.You

will be given the option to allow or not allow the override.

1

Load a DVD disc (see page 26).

2

If the DVD disc has been designed to temporarily cancel the Rating level, the screen which follows the "Reading" screen will change, depending on which disc is played.

If you select "YES" with

ENTER key, password input screen will then appear.

3

Enter the password with Number buttons (0-9).

Then press ENTER.

• If you interrupt the entering, press RETURN.

,4

¢-'1" Playback will commence if the entered password was correct.

NOTE:

• This temporary cancellation of the rating level will be kept until the disc is ejected.

When the disc is ejected, the original rating level will be set again automatically.

5 Press ENTER.

Now your new password has been set.

Be sure to remember this number!

NOTE:

• Do not forget the password.

If you forget the password, contact Customer Service at 1-800-289-

0980. The original remote control will be required.

35

Language code list

Enter the appropriate code number for the initial settings "Menu", "Subtitle" and/or "Audio" (see page 32).

Language Name

Abkhazian

Afar

Afrikaans

Albanian

Amharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Basque

Bengali;Bangla

Bhutani

Bihari

Breton

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Chinese

Corsican

Croatian

Czech

Danish

Dutch

English

Esperanto

Estonian

Faroese

Code Language Name

1112 Fiji

1111 Finnish

1116 French

2927 Frisian

1123 Galician

1128 Georgian

1835 German

1129 Greek

1135 Greenlandic

1136 Guarani

1211 Gujarati

1531 Hausa

1224 Hebrew

1436 Hindi

1218 Hungarian

1228 Icelandic

1217 Indonesian

2335 Interlingua

1215 Irish

2123 Italian

1311 Japanese

3618 Javanese

1325 Kannada

1828 Kashmiri

1329 Kazakh

1411 Kirghiz

2422 Korean

1524 Kurdish

1525 Laothian

1530 Latin

1625 Latvian, Lettish

Code Language Name

1620 Lingala

1619 Lithuanian

1628 Macedonian

1635 Malagasy

1722 Malay

2111 Malayalam

1415 Maltese

1522 Maori

2122 Marathi

1724 Moldavian

1731 Mongolian

1811 Nauru

1933 Nepali

1819 Norwegian

1831 Oriya

1929 Panjabi

1924 Pashto, Pushto

1911 Persian

1711 Polish

1930 Portuguese

2011 Quechua

2033 Rhaeto-Romance

2124 Romanian

2129 Russian

2121 Samoan

2135 Sanskrit

2125 Scots Gaelic

2131 Serbian

2225 Serbo-Croatian

2211 Shona

2232 Sindhi

Code Language Name

2224 Singhalese

2230 SIovak

2321 Slovenian

2317 Somali

2329 Spanish

2322 Sundanese

2330 Swahili

2319 Swedish

2328 Tagalog

2325 Tajik

2324 Tamil

2411 Tatar

2415 Telugu

2425 Thai

2528 Tibetan

2611 Tigrinya

2629 Tonga

1611 Turkish

2622 Turkmen

2630 Twi

2731 Ukrainian

2823 Urdu

2825 Uzbek

2831 Vietnamese

2923 VolapQk

2911 Welsh

1714 Wolof

2928 Xhosa

2918 Yiddish

2924 Yoruba

2914 Zulu

3022

3017

3011

3030

3015

3018

1225

3019

3025

3028

3021

3033

3121

3128

3136

3219

3225

1335

3325

Code

2919

2921

2922

2925

1529

2931

2933

2932

3418

2019

3525

3631

Connections to other equipment

The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component.

Check the Owner's Manual provided with each component for the location of video and audio inputs and outputs.

To connect the LCD TV/DVD to a VCR

Rear of the unit VCR

_,,_l To Audio/Video OUT K _=_:_

_====_

L=, i r J

©

_ To VIDEO/AUDIO IN

Audio/Video cord (not supplied)

To connect the LCD TV/DVD to a VCR with an S-Video cord

If you connect a VCR with a S-Video cable to the S-VIDEO IN jack on the rear side of the unit, you must also connect the audio cables to the AUDIO IN jacks on the rear side of the unit.

The S-Video cable only carries the video signal.The

audio signal is separate.

NOTE:

• When the S-Video cable and the standard video cable are connected at the same time, the S-Video cable takes precedence.

Rear of the unit

VCR i _4_#r_

@

0_ To Audio OUT J

/

To PI _ To AUDIO IN

S-VIDEO"1" T To S-Video OUT

S-Video cord (not supplied)

To connect to a DVD player with Component Video Input

You can enjoy a high quality picture by connecting the unit's COMPONENT VIDEO OUT jacks of your DVD player with the COMPONENT video cables (not supplied).

Rear of the unit

Component video cord (not supplied)

To COMPONENT IN

I To Component OUT

PB DVD

A qP

L(M@N@) _#E@

©

IUl

-cS

To Audio OUT t,_

]

To LINE 2 AUDIO IN

Audio cord (not supplied)

NOTE:

• Component Video input of the unit are for use with a device which output 480i/1080i interlaced signals and

480p/720p progressive signals.

37

Connections to other equipment (continued)

To connect a HDMI or a DVI device to the unit

The HDMI 1 input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device.

When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal.

Separate analog audio cords required.

Rear of the unit

To DVI output

DVI device

_J = _

; %NToPOJDV'

_#_o I AUDIO IN Audiocord (not supplied)

HDMI device

Ii;ii

_-

To

HDMI/DVl

HDMI - to - DVI adapter cable

(HDMI type A connector)

(not supplied)

ToHDMIout

(not supplied)

NOTE:

When using HDMI I/DVI to connect your HDMI or DVI devices, you must select the corresponding audio input source (HDMI or DVI) on the menu screen (see "Selecting the HDMI audio input source" on page 25). Otherwise you will only see the image with no sound.

• If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cable or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To receive the picture you must change the output resolution on the external component.

Should you require further instruction, please contact the manufacturer of the external component.

Using an AV Amplifier with built-in digital surround

If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including

Dolby Digital Surround audio that sounds just like the movie.

Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, or MPEG decoder etc. as shown below.

Rear of the unit

Subwoofer

Front

I Speaker

I (Right)

Q

Speaker_

Fr°nt

_

/---L--_

/ \

( l

TV/DVD __ '

Coaxial digital cable / ]r

(not supplied) /

To Coaxial \ _

Digital Audio Input q /._.,.

I Icoo _ 00 O [Z I |

H

AV Amplifier with built-in digital surround decoder as listed above

I I

_

J

Surround

Speaker (Left) _

(Right)

NOTE:

• When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio.

There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder.

Connections to other equipment (continued)

To connect an audio system

This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the

TV's remote control.

To control the audio, turn on the TV and the stereo amplifier, and turn off the TV's built-in speakers (see "Turning off the built-in speakers" on page 25).

; ,,

Left side of the TV i w

Amplifier i I

ooo 0 ooo

To Audio (L) Input _y_'--To Audio (R)

Audio cord (not supplied)

T

Input

NOTE:

To hear sound when using an external audio amplifier, the volume of both theTV and the amplifier must be set above 0 (zero).

For example, if the volume of the TV is set to 0, you will not be able to hear any sound, even if the volume of the amplifier is at its highest level.

To connect the TV/DVD to a camcorder, or a TV Game

To playback from a camcorder, connect the camcorder to the unit as shown.

This unit can also be used as a display device for many video games.

However, due to the wide variety of signals generated by these devices and subsequent hook-up variations required, they have not all been included in the suggested connection diagrams.

You'll need to consult each component's Owner's Manual for additional information.

Rear of the unit t t t TO Audio/Video OUT

!_To

VIDEO/AUDIO IN cord

(not supplied)

[_

_ or I TV GAME ]

To connect the TV/DVD to a PC (Personal Computer)

Before you connect this TV/DVD to your PC, change the adjustment of your PC's Resolution and Refresh rate

(60Hz).

Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR on the rear of the TV/DVD.

Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to the AUDIO connector of the PC/DVI AUDIO IN jack of the TV/DVD. You can also connect the PC with HDMI cable. If you use HDMI cable, you don't have to connect the audio cord. If you use DVI-to-HDMI cable, please connect audio cord as same way as VGA cable.

Press INPUT SELECT on the remote control to select PC mode.

Switch on the computer.

The TV/DVD can operate as the computer monitor.

Rear of the unit Monitor Display modes

PC

MODE

640x480 60/72/75 Hz

VGA 720x400

SVGA 800x600

70Hz

56/60/72/75 Hz 1" _'

IN i

Audio cord

(not supplied) "

(not supplied)

VGA cable

IJ

_ XGA 1024x768

I

WXGA 1280x768 60Hz 60/70/75 Hz

WXGA 1280x720

To return to normal mode

NOTE:

HDMI cable (not supplied) Press INPUT

• The on-screen displays will have a different appearance in PC mode than in TV mode.

SELECT again.

• If there is no video signal from the PC when the unit is in PC mode, "No signal" will appear on the TV-screen.

39

Reception disturbances

Most types of television interference can be remedied by adjusting the height and position of the VHF/

UHF antenna.

Outdoor antennas are recommended for best results.

The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast.

IGNITION

Black spots or horizontal streaks may appear, the picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps or AC powered tools and appliances such as drills or hair dryers.

GHOSTS

Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected by tall buildings, hills or other large objects. Changing the direction or position of the antenna may improve the reception.

1

If the TV is located far from the TV station, in a fringe reception area where the signal is weak, small dots may appear in the picture.

If the signal is extremely weak, the installation of a larger external antenna may be necessary.

I

NOW

RADIO FREQUENCY INTERFERENCE

(RFI)

Caused by two-way radios, this type of interference produces moving ripples or diagonal streaks in the picture. Some cases may cause a loss of contrast in the picture. Changing the direction and position of the antenna or installing an RFI filter may improve the picture.

.i

r

PICTURE SIZE VARIATION

A slight picture size variation is normal when you adjust the CONTRAST or

BRIGHTNESS settings.

CARE AND MAINTENANCE

To prevent fire or shock hazard, disconnect the TV from the power source before cleaning.

The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.

Use caution when cleaning or wiping the plastic parts.

Problems and troubleshooting

Use the following check list for troubleshooting when you have problems with your TV/DVD. Consult your local dealer or service outlet if problems persist.

Be sure all connections are properly made when using with other units.

POWER

SYMPTOMS I POSSIBLE SOLUTIONS

TV/DVD does not operate.

TV BROADCAST RECEPTION

• Make sure the power cord is plugged in.

• Power is off, check fuse or circuit breaker.

• Unplug unit, then plug it back in.

Poor sound

Poor picture or no sound.

or no picture.

• Station or Cable TV experiencing problems, tune to another station.

• Check Volume adjustments or muting.

• Check for sources of possible interference.

• Station or Cable TV experiencing problems, tune to another station.

• Check antenna or Cable TV connections, reorient antenna.

• Check for sources of possible interference.

• Check picture control adjustments.

I PAGE_

12

17

17, 18

40

17

13, 14

40

21,22

Poor reception channels.

on some

Poor color or no color.

Picture wobbles or drifts.

No Cable TV reception.

Horizontal bars on screen.

No reception channel

TV shuts

Closed activated.

13.

or diagonal off.

above

- Caption is not

• Station or Cable TV experiencing problems, tune to another station.

• Station signal is weak, reorient antenna to receive stronger station.

• Check for sources of possible interference.

• Station or Cable TV experiencing problems, tune to another station.

• Make sure channels are set into memory.

• Check picture control adjustments.

• Check antenna or Cable TV connections, reorient antenna.

• Check for sources of possible interference.

• Station or Cable TV experiencing problems, tune to another station.

• Make sure channels are set into memory.

• CableTV company is scrambling signal.

• Check antenna orientation.

• Check all CableTV connections.

• Set Signal Type option to the "Cable" mode.

• Station or Cable TV system problems, try another station.

• Check antenna connections, reorient antenna.

• Check for sources of possible interference.

• Make sure Signal Type option is in the appropriate mode.

• If using antenna, check UHF antenna connections.

• No broadcast on station tuned.

• Sleep Timer is set.

• Power interrupted.

• TV station experiencing problems or program tuned is not closed captioned.

Try another channel.

• Check CableTV connection or VHF/UHF antenna, reposition or rotate antenna.

• Set Closed caption in the menu.

17

13

40

17

15

21,22

13, 14

40

17

15

17

13, 14

20, 21

Display is not shown in

_our language.

• Select proper language in the menu options.

15 .,_

• The LCD panel is a very high technology product, giving you fine picture details. Occasionally, a few nonactive pixels may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance of your product.

13

14

15

17

13

40

15

13

17

18

41

Problems and troubleshooting (continued)

POSS,BLE •

DVD

Playback doesn't start.

No picture.

No sound.

Picture is distorted during

CUE or REVIEW.

Stopping playback, search, slow-motion play, repeat play, or program play, etc. cannot be performed.

No on-screen display.

No surround sound.

The unit or remote operation key is not functioning.

Playback does not start when the title is selected.

Audio soundtrack and/or subtitle language is not changed when you play back a DVD.

No subtitle.

Angle cannot be changed.

"X" appears on the screen.

REMOTE CONTROL

• No disc is inserted.

• The disc may be dirty. Clean up the disc.

• The unit cannot play CD-ROMs, etc.

• TV/DVD selector is not set correctly.

• Checkthe input selector of the amplifier is set properly.

• The unit is in the Special playback mode.

• Select the correct Audio Output position on AV amplifier.

• The picture will be distorted occasionally.

• Some discs may not allow some functions.

• Select Display On.

• The setup does not match your stereo system.

• Turn off the unit and unplug the AC power cord for several minutes, then replug it.

• Check the Parental setup.

• Multilingual language is not recorded on the DVD disc.

• Some discs have no subtitles.

• Subtitles are cleared.

Press SUBTITLE.

• Multi-angles are not recorded on the DVD disc.

• The function is prohibited with the unit or the disc.

32

31

27

26

8

8

26

27

39

33

39

12

35

31, 32

The remote control does not function.

• Aim at the remote control at the remote sensor.

• Operate within Approx.

15 feet or reduce the light in the room,

• Clear the path of the beam.

• The batteries are weak. Replace the batteries.

• Check the batteries are inserted correctly.

12 r l,,lrSANSU I®

FOR CUSTOMER SERVICE, ADDITIONAL SETUP AND OPERATING ASSISTANCE, OR TO ORDER ACCESSORIES PLEASE CALL:

1-800-289-0980

WHEN CALLING CUSTOMER SERVICE - PLEASE HAVE YOUR MODEL NUMBER

OR WRITE TO:

ORION SALES, INC.

3471 N. UNION DR.

OLNEY, ILLINOIS 62450

READY

FOR INFORMATION ON OUR OTHER PRODUCTS, OR TO ORDER ACCESSORIES ONLINE, PLEASE VISIT OUR WEBSITE AT www.orionsalesinc.com

,#

Specifications

Model

GENERAL

Power supply:

Power consumption:

Weight:

Dimensions:

HDLCDVD265

AC 120V 60Hz

Operation: 102W

Stand by: 0.7W

8.8 kg (19,4 Ibs)

Width: 663 mm (26-1/8 inches)

Height: 498 mm (19-5/8 inches)

Depth: 214 mm (8-7/16 inches)

5oc _ 40°C

Less than 80%

HDLCDVD265A

I 8.3kg

(18.31bs)

Operating temperature:

Operating humidity:

TELEVISION

Type:

Display method:

Number of Pixels:

Tuner type:

Receiving channels:

Inputs:

26.01 inches (660.5 mm diagonal)

Transmission TFT color LCD panel

1366 (H) x 768 (V)

NTSC standard

ATSC standard (8VSB), QAM

VHF

UHF

CATV

2-13

14-69

14-36 (A)-(W)

37-59 (AA)-(WW)

60-85 (AAA)-(ZZZ)

86-94 (86)-(94)

95-99(A-5)-(A-1)

100-135 (100)-(135)

01 (4A)

S-Video: Y-Input:1.0V

(p-p), 75 ohms

Video:

Audio:

C-Input:0.3

V (p-p), 75 ohms

(RCA) 1 V p-p/75 ohms

(RCA) -8 dBm/50K ohms

Component video: (Y) 1 V (p-p), 75 ohms

HDMI:

(Pb)/(Pr) 0.7 V (p-p), 75 ohms

HDMI compliant (type A connector)

HDCP compliant

E-EDID compliant

Suggested scan rates: 480p, 480i, 720p, 1080i, 1080p

HDMI Audio: 2-channel PCM

PC Monitor:

Antenna:

32/44.1/48 kHz sampling frequency

16/20/24 bits per sample

Mini-Dsub 15pin x 1

VHF/UHF In 75 ohms coaxial

Digital audio out: 0.5 Vp-p 75 ohms terminated

40.6 mm x 121.9 mm (1-5/8 inches x 4-13/16 inches), 8 ohms x 2

5.0W + 5.0W

Outputs:

Speaker:

Audio output power:

DVD/CD player

Signal system:

Applicable disc:

Pickup:

ACCESSORIES

NTSC

1 .DVD (12 cm, 8 cm)

2.CD (12 cm, 8 cm)

CD: Wavelength:790 nm

Maximum output power: 7 mW

DVD: Wavelength: 655 nm

Maximum output power: 5 mW

Remote control

Batteries (UM-4) x 2

AC Cord

Designs and specifications are subject to change without notice.

43

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement