Petroleum and Petrochemical testers

Petroleum and Petrochemical testers
Petroleum and Petrochemical testers
0RUHWKDQ$670,62',1&(1,3
PHWKRGVFRYHUHGIURP0DQXDOWR)XOO\DXWRPDWLF
RSHUDWLRQ$QDO\VLVGHYHORSPHQWDQGVXSSRUW
Edition 2013
The unique source of Petroleum testing
instrumentation for more than 40 years
GECIL Process established in 1967 in Lyon by a team of scientists and engineers to manufacture and develop
electronic control boards under the name of limited partnership “Gecil” ( Groupe d’Etude et de Circuits
Imprimes de Lyon Sarl) manufactured and developed several automation projects for several major industries
such as SNCF Railways , Metro , Banks networking , Pharmaceutical Plants , Petroleum refineries , Chemical
plants , Etc..
In the 70’s Gecil starts its collaboration with the petroleum industry and more specifically with TOTAL to
introduce the first fully automatic distillation TBP D2892 2L . This has been the starting point of a full line of
distillation units in accordance with the ASTM methods D86-D1160-D2892-D5236 from 125ml to 200 Liters .
In 1981 Gecil became GECIL Process SA and starts the distribution and service center for North and South
America GT instruments in 1984. GT instruments introduced on the US Market the product line of GECIL
process but also the instruments from several European manufacturers such as ISL France ,HAAGE Germany,
Analis Belgium .
In the 90’s GECIL Process participated to Normalab Sarl the manufacturing and development center of
automatic instruments for Normandie Labo SA. Since this period GT instruments is distributing and servicing
the petroleum products line Normalab.
In 1995 GECIL Process has been appointed by IFP The French Petroleum Institute as a licensor of Carburane
DHA GC analysis software and applications . This has been the starting point of the development of several
Gas Chromatography applications and software’s in collaboration with IFP or others petroleum companies to
deliver technical solutions or Turnkey systems in the GC’s analytical labs or On line.
Also during the same period GECIL Process entered in the capital of GR Scientific UK to complete the
introduction of a new line of Karl Fischer Coulometric Titrators for laboratory use and field portable testing
unit .
In this Petroleum and Petrochemical Testers Catalog 2013 , you will find a selection of ASTM testers by
method number .This list is non exhaustive and additional instruments are available .
Several catalogs are available ,contact our Customer Sales Department :
- Crude Oil Evaluation distillation Catalog .
- Custom Analytical Solutions GC catalog
- KF Titrators , TAN TBN Titrators catalog
- Catalyst Mechanical physical testers
- ASTM automatic and Semi automatic analyzers
- All individual brochures on request
Our continuous feedback from our users and participation to several standardization organizations such as
ASTM keep us on top of the latest modifications and improvements for the instruments made by our company.
Petroleum and Petrochemical testers Catalog 2013
AUTOMATED
AUTOMATEDATMOSPHERIC
ATMOSPHERICDISTILLATION
DISTILLATION
OF
OFPETROLEUM
PETROLEUMPRODUCTS
PRODUCTS--NDI
NDI450
450
Performs Distillations in
accordance with:
ASTM D86, D189, D850, and D1078
PC Supervisor controls up to 16 distillation units
All Glass
Receiver
• Stand Alone configuration &
• XP Pro / W7 Supervisor linked
Multiple distillation curves display to compare several samples
• Unlimited Product and Data Files Storage
• Multiple Calibration of Probes and Receivers
• LIMS Ready and fully W CE system
• All Steel Casing for Sturdiness and Safety
• A Peltier heating and cooling system no
more AC system
Synoptic screen allows real time viewing
of all distillation parameters
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
http://www.gecil.com
http://www.gecil.com
AUTOMATIC DISTILLATION OF PETROLEUM PRODUCTS
NDI 450 - Available Features and Specifications
Instrument Description:
„ With this fifth generation, the NDI 450 has been developed using the latest evolutions and technology available for atmospheric
distillation. This allows for higher accuracy for increased repeatability and a user friendliness never attained until now.
„ The NDI 450 complies with all 5 groups of sample types defined in the ASTM methods. It can operate as a stand alone
unit with its own keyboard and 14” color display in Windows CE environment . It can also be linked together to an external Pentium
PC W7 or XP Pro . Up to 16 distillation units can be connected to a single PC Supervisor. Each unit is independent and may be
disconnected or stopped without disrupting other units.
„ The NDI 450 standard configuration includes a fast cooling system with Peltier system no more AC compressor , a
thermostated condenser and receiver compartment, an optional automatic fire extinguishing detection system with Nitrogen
injection in-built, temperature range is 0 to 450°C, measure of ambient temperature and pressure, auto-diagnostic function, Color
touch screen 10 “ display and touch pad, and 3 USB Ports—1 RS232 serial port and 1 Ethernet RJ45 port , VGA port to connect
external monitor, Connectors for calibration of temperature and pressure analog inputs.
„
The NDI 450 is delivered with the following standard accessories:
Flasks and CERAN plates for all methods mentioned above including drypoint, 100ml all glass receiver, a 5ml graduated cylinder to
quantify residue, PT 100 probe, Automatic dry point kit, an operating and service manual.
Available Features & Specifications
• Heating system: 1000W conforms to ASTM
• Heating system: 1000W conforms to ASTM
• Condenser bath: 0 - 60°C
• Condenser bath: 0 - 60°C
• Receiver compartment: 0 - 40°C
• Receiver compartment: 0 - 40°C
• Flask temperature range: 0 - 450°C
• Flask temperature range: 0 - 450°C
• Resolution flask Temperature: 0.05°C
• Resolution flask Temperature: 0.05°C
• Resolution level follower: 0.02ml
• Resolution level follower: 0.02ml
• Resolution atmospheric pressure: 0.07 bars
• Resolution atmospheric pressure: 0.07 bars
• Distillation rate: 0 - 10ml/mn
• Distillation rate: 0 - 10ml/mn
• Calibration level follower: 5 & 100 ml
• Calibration level follower: 5 & 100 ml
• Ambient temperature: Yes
• Ambient temperature: Yes
• Cooling system: Sealed, Peltier system
• Cooling system: Sealed, Peltier system
•Cooling at end of test: By ventilation
•Cooling at end of test: By ventilation
• Condenser start-up time: Immediate
• Condenser start-up time: Immediate
• Fire extinguisher: Both optical and Nitrogen injection
• Fire extinguisher: Both optical and Nitrogen injection
• Display: 10” color screen
• Display: 10” color screen
• Keyboard: touch screen pad
• Keyboard: touch screen pad
• 3 USB ports
• 3 USB ports
• Ethernet Port
• Ethernet Port
• Dimensions: 69 x54x50 cm 27 x 21 x 20 inches
• Dimensions: 69 x54x50 cm 27 x 21 x 20 inches
• Weight:80 Kgs 176 Lbs
• Weight:80 Kgs 176 Lbs
• Power requirement: 230V/3KW 50/60Hz
• Power requirement: 230V/3KW 50/60Hz
• Number of programs: greater than 1000
• Number of programs: greater than 1000
• Data Storage: greater than 500000 tests
• Data Storage: greater than 500000 tests
• Create/ Modify/ Delete files and data: Yes
• Create/ Modify/ Delete files and data: Yes
• Safety management: Yes
• Safety management: Yes
• Detection of heating range by algorithm: Yes
• Detection of heating range by algorithm: Yes
• Optimization of heating rates: Yes
• Optimization of heating rates: Yes
• Synoptic screen: To follow test in progress
• Synoptic screen: To follow test in progress
• Numerical & Graphical display of data during test
• Numerical & Graphical display of data during test
• Repeatability and reproducibility calculation: Yes
• Repeatability and reproducibility calculation: Yes
• Data transfer to a LIMS: Yes
• Data transfer to a LIMS: Yes
• Maintenance and diagnostic functions: Yes
• Maintenance and diagnostic functions: Yes
• Automatic calibration: Yes
• Automatic calibration: Yes
• Historical data of calibration and alarms: Yes
• Historical data of calibration and alarms: Yes
• Data entry of correction table: Yes
• Data entry of correction table: Yes
• Dry point detection: Automatic
• Dry point detection: Automatic
• Receiver auto-detect: Yes
• Receiver auto-detect: Yes
• Door closure auto-detect: Yes
• Door closure auto-detect: Yes
• Heating rates: 3 programmable
• Heating rates: 3 programmable
• Local mode and PC supervisor: Yes – W7 – XP pro
• Local mode and PC supervisor: Yes – W7 – XP pro
• Numerical & Graphical comparison of data: Yes
• Numerical & Graphical comparison of data: Yes
• Cetane index: Yes
• Cetane index: Yes
For additional information please contact:
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
http://www.gtinstruments.com
http://www.gtinstruments.com
Serving
ServingNorth
North&&South
SouthAmerica
America
Ordering information:
M8600-450-A110V: Complete automatic distillation D86
M8600-450-A110V:unit
Complete
distillation D86
without automatic
Fire extinguisher
unit without Fire extinguisher
M8600-450-B110V: Complete automatic distillation D86
M8600-450-B110V:unit
Complete
distillation D86
with Fireautomatic
extinguisher
unit with Fire extinguisher
AUTOMATIC
AUTOMATICVACUUM
VACUUMDISTILLATION
DISTILLATION
OF
OFPETROLEUM
PETROLEUMPRODUCTS
PRODUCTS––MINIDIST
MINIDIST1160
1160
Version
Version6.0
6.0
Method ASTM D1160
Our new MINIDIST 1160 version V6.0 is the result of more
than 25 years manufacturing fully automatic vacuum
D1160 distillation apparatus . GECIL process has been the
first company to design a PC control D1160 in the 80’s .
The new version includes a truly embedded industrial PC
inside the process cabinet .
The operator can control the unit in local mode with all
necessary functions ; programming , storage of results ,
synoptic color display , curves display , diagnostic mode ,
data transfer and more .
This unit has been design to reduce the foot print of such
instrument on the bench with no need of a supervisor PC
next to it . Great care has been taken for easy maintenance
access for all elements of the unit.
Truly embedded PC Pentium Control unit with color display
Of course the new version V6.0 benefits of all our
improvements since 20 years allowing to run heavy and
light oil, residues , difficult samples , atmospheric runs ,
custom design program parameters accessible at any
moment . All the above without compromising on the
safety issue of such distillation method.
Real alphanumeric industrial keyboard
• Stand Alone MINIDIST 1160 Version 6.0
• Truly embedded PC Pentium built in .
• Windows supervisor software W7 / XP Pro controls
several distillation units
Manual switches
• Product and Data Files Storage
• Synoptic and curves display in real time
Hot air thermostated
receiver chamber
• Diagnostic maintenance display
• Automatic cleaning and results print or transfer .
• Compact and easy to use
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
Large glass trap and light
ends recovery recipient.
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
Phone:(281)
(281)334
334--5015
5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
Email::[email protected]
[email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com or
orwww.gtinstruments.com
www.gtinstruments.com
AUTOMATIC
AUTOMATICVACUUM
VACUUMDISTILLATION
DISTILLATION
BASIC
BASIC––GECDIST
GECDIST1160
1160Version
Version6.0
6.0
ASTM D1160 method for Asphalts , Biofuels ,
Oils , lubricants , HVGO , LVGO etc ..
• Stand Alone GECDIST 1160 Version 6.0
• Truly embedded PC Pentium built in .
Of course the new version V6.0 benefits of all
our improvements since 25 years allowing to run
heavy and light oil, residues , difficult samples ,
atmospheric runs , custom design program
parameters accessible at any moment . All the
above without compromising on the safety issue
of such distillation method.
Our new GECDIST 1160 version V6.0 is a respond to
the increase demand of small laboratories with low
through-put of samples and looking at an affordable
automatic distillation unit .With our experience of
more than 25 years manufacturing fully automatic
vacuum D1160 distillation apparatus we introduce
GECDIST 1160 V6 unit.
This configuration has all capabilities of our more
flexible unit MINIDIST 1160 V6 but without the
capability to communicate with an external PC W7
supervisor .
In addition the unit can be delivered without vacuum
pump , heating circulating bath , heating mantle and
flask as generally these components are already used
in most laboratories . Making GECDIST 1160 V6 the
best affordable automatic unit on the market .
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com
FULLY
FULLY AUTOMATIC
AUTOMATIC DISTILLATION
DISTILLATION
MINIDIST
MINIDIST PLUS
PLUS type
type RTBP
RTBP Version
Version V6
V6
As per ASTM D2892 and D5236
„ The MINIDIST PLUS type RTBP unit includes all
ASTM D2892 glassware, Head and flask probes,
electronic pressure sensor 100 mmHg,level follower
system to control volume and distillation rate, automatic
fraction collector for 8 positions , automatic embedded
PC104 with vacuum control , vacuum pump , condenser
cooling bath, Ethernet link to a PC Windows XP Pro
Supervisor GECDIST Net.
„ A comprehensive user friendly software allows the
operator to access several graphic screens with synoptic
display , curves display , distillation and calibration
parameters files , maintenance and diagnostic screens.
Automatic 2L D2892 distillation unit MINIDIST PLUS type
RTBP 02L with option D5236 500ml
Models from 2L or 3L flasks
Automatic debutanisation step
„ Select a distillation program from the library and press
the key START. The MINIDIST PLUS program will
automatically control the initial heating, debutanisation,
equilibrium time , IBP detection , distillation control up to
the final boiling point with automatic preparation of the
fractions in temperature AET or Volume . The only
operator intervention is when changing pressure set
point , he has to recover the fractions from the previous
step. The program will memorized all analog and digital
data every 0.1% volume and every 60s .
„ Automatic print out of final report with customer
configuration . Conversion of results in format Excel .
Automatic fractions collector 8
receivers
„ Several options are available such as differential
pressure drop control , heating column jacket,
Cryoplunger for vacuum trap , cooling circulating bath
for distillate lines, electronic balance .
Automatic cleaning program.
„ Optional D5236 setting with 500 ml flask to prepare
fractions up to 575 C AET
Automatic control from IBP to FBP.
Run in °C or °F , in mmHg or mBar.
Extensive library of distillation
programs.
Data storage of distillation runs
Built in Ethernet interface for
remote control by supervisor PC
For information please contact:
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
Phone:(281)
(281)334
334--5015
5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
Email::[email protected]
[email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com
FULLY
FULLY AUTOMATIC
AUTOMATIC DISTILLATION
DISTILLATION
MINIDIST
MINIDIST PLUS
PLUS type
type EE Version
Version V6
V6
As per ASTM D2892
„ The MINIDIST PLUS type E unit includes all ASTM
D2892 glassware, Head and flask probes, electronic
pressure sensor 10 and 1000 mmHg,level follower
system to control volume and distillation rate, automatic
fraction collector for 12 positions , automatic embedded
PC104 with vacuum control , vacuum pump , condenser
cooling bath, Ethernet link to a PC Windows XP Pro
Supervisor GECDIST Net.
„ A comprehensive user friendly software allows the
operator to access several graphic screens with synoptic
display , curves display , distillation and calibration
parameters files , maintenance and diagnostic screens.
Automatic D2892 distillation unit MINIDIST PLUS type E
Models from 2L up to 22L flasks
Automatic debutanisation step
Automatic control from IBP to FBP.
Automatic fractions collector
Automatic cleaning program.
„ Select a distillation program from the library and press
the key START. The MINIDIST PLUS program will
automatically control the initial heating, debutanisation,
equilibrium time , IBP detection , distillation control up to
the final boiling point with automatic preparation of the
fractions in temperature AET or Volume . The only
operator intervention is when changing pressure set
point , he has to recover the fractions from the previous
step. The program will memorized all analog and digital
data every 0.1% volume and every 60s .
„ Automatic print out of final report with customer
configuration . Conversion of results in format Excel .
„ Several options are available such as differential
pressure drop control , heating column jacket,
Cryoplunger for vacuum trap , cooling circulating bath
for distillate lines, electronic balance .
Run in °C or °F , in mmHg or mBar.
Extensive library of distillation
programs.
Data storage of distillation runs
Built in Ethernet interface for
remote control by supervisor PC
For information please contact:
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com or
orwww.gtinstruments.com
www.gtinstruments.com
FULLY
FULLY AUTOMATIC
AUTOMATIC DISTILLATION
DISTILLATION
MINIDIST
MINIDIST PLUS
PLUS type
type MVD
MVD version
version V6
V6
As per ASTM D2892
„ The MINIDIST PLUS type MVD unit includes all
ASTM D2892 glassware, Heating column jacket , Head
and flask probes, electronic pressure sensor 10 and
1000 mmHg,level follower system to control volume and
distillation rate, automatic pressure drop control,
automatic fraction carrousel for 36 positions , automatic
weighing , automatic capping of the collecting receivers,
automatic embedded PC104 with vacuum control ,
vacuum pump , condenser and distillate lines cooling
baths, Cryoplunger for traps , Ethernet link to a PC
Windows XP Pro Supervisor GECDIST Net.
„A comprehensive user friendly software allows the
operator to access several graphic screens with synoptic
display , curves display , distillation and calibration
parameters files , maintenance and diagnostic screens.
Automatic D2892 distillation unit MINIDIST PLUS type MVD
Models from 2L up to 200L flasks
Absolutely no operator intervention
from start to FBP 375/420 °C AET
Automatic debutanisation step
„ Select a distillation program from the library and press
the key START. The MINIDIST PLUS program will
automatically control the initial heating, debutanisation,
equilibrium time , IBP detection , distillation control up to
the final boiling point with automatic preparation of the
fractions in temperature AET or Volume . The only
operator intervention is to load the crude and recover the
fractions after vacuum step at 350 to 420C AET . The
program will memorized all analog and digital data every
0.1% volume and every 60s .
„ Automatic print out of final report with customer
configuration . Conversion of results in format Excel .
Automatic control from IBP to FBP.
Automatic fractions collector
Automatic cleaning program.
Extensive library of distillation
programs.
Data storage of distillation runs
Built in Ethernet interface for
remote control by supervisor PC
For information please contact:
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com or
orwww.gtinstruments.com
www.gtinstruments.com
FULLY
FULLY AUTOMATIC
AUTOMATIC DISTILLATION
DISTILLATION
MINIDIST
MINIDIST PLUS
PLUS type
type FF version
version V6
V6
As per ASTM D2892
„ The MINIDIST PLUS type F unit includes all ASTM
D2892 glassware, Head and flask probes, electronic
pressure sensor 10 and 1000 mmHg,level follower
system to control volume and distillation rate, automatic
fraction collector for 12 positions , automatic embedded
PC104 with vacuum control , vacuum pump , condenser
cooling bath, Ethernet link to a PC Windows XP Pro
Supervisor GECDIST Net.
„A comprehensive user friendly software allows the
operator to access several graphic screens with synoptic
display , curves display , distillation and calibration
parameters files , maintenance and diagnostic screens.
Automatic D2892 distillation unit MINIDIST PLUS type F
Models from 36L up to 100L flasks
Automatic debutanisation step
Automatic control from IBP to FBP.
Automatic fractions collector
Automatic cleaning program.
Run in °C or °F , in mmHg or mBar.
Extensive library of distillation
programs.
„ Select a distillation program from the library and press
the key START. The MINIDIST PLUS program will
automatically control the initial heating, debutanisation,
equilibrium time , IBP detection , distillation control up to
the final boiling point with automatic preparation of the
fractions in temperature AET or Volume . The only
operator intervention is when changing pressure set
point , he has to recover the fractions from the previous
step. The program will memorized all analog and digital
data every 0.1% volume and every 60s .
„ Automatic print out of final report with customer
configuration . Conversion of results in format Excel .
„ Several options are available such as differential
pressure drop control , heating column jacket,
Cryoplunger for vacuum trap , cooling circulating bath
for distillate lines, electronic balance .
Data storage of distillation runs
Built in Ethernet interface for
remote control by supervisor PC
For information please contact:
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
Phone:(281)
(281)334
334--5015
5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
Email::[email protected]
[email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com
FULLY
FULLY AUTOMATIC
AUTOMATIC POTSTILL
POTSTILL DISTILLATION
DISTILLATION
MINIDIST
MINIDIST PLUS
PLUS type
type A
A Version
Version V6
V6
As per ASTM D5236
„ The MINIDIST PLUS type A unit includes all ASTM
D5236 glassware, Head and flask probes, electronic
pressure sensor 10 and 1000 mmHg,level follower
system to control volume and distillation rate, automatic
fraction collector for 12 positions , automatic embedded
PC104 with vacuum control , vacuum pump , condenser
cooling bath, Ethernet link to a PC Windows XP Pro
Supervisor GECDIST Net.
„A comprehensive user friendly software allows the
operator to access several graphic screens with synoptic
display , curves display , distillation and calibration
parameters files , maintenance and diagnostic screens.
Automatic D5236 distillation unit MINIDIST PLUS type A
Models from 2L up to 22L flasks
Automatic first drop detection
Automatic control from IBP to FBP.
Automatic fractions collector
Automatic cleaning program.
Run in °C or °F , in mmHg or mBar.
„ Select a distillation program from the library and press
the key START. The MINIDIST PLUS program will
automatically control the initial heating, IBP detection,
first drop detection , distillation control up to the final
boiling point with automatic preparation of the fractions
in temperature AET or Volume . The only operator
intervention is when changing pressure set point , he
has to recover the fractions from the previous step. The
program will memorized all analog and digital data every
0.1% volume and every 60s .
„ Automatic print out of final report with customer
configuration . Conversion of results in format Excel .
„ Several options are available such as heating column
jacket, Cryoplunger for vacuum trap , electronic balance.
Extensive library of distillation
programs.
Data storage of distillation runs
Built in Ethernet interface for
remote control by supervisor PC
For information please contact:
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
Phone:(281)
(281)334
334--5015
5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com
AUTOMATIC
AUTOMATIC POTSTILL
POTSTILL DISTILLATION
DISTILLATION
GECDIST
GECDIST type
type A
A Version
Version V6
V6
As per ASTM D5236
External PC104 Controller
GECDIST type A V6
„ GECDIST type A unit includes all
ASTM D5236 glassware, Head and
flask probes, electronic pressure
sensor 100 mmHg,level follower
system to control volume and
distillation rate, automatic fraction
collector for 12 positions , external
embedded PC104 with vacuum control
, vacuum pump , condenser cooling
bath,
A comprehensive user friendly software allows the
operator to access several graphic screens with synoptic
display , curves display , distillation and calibration
parameters files , maintenance and diagnostic screens.
Automatic D5236 distillation unit GECDIST type A V6
From 2L up to 10L Glass flasks
„ Select a distillation program from the library and press
the key START. The GECDIST V6 program will
automatically control the initial heating, IBP detection, first
drop detection , distillation control up to the final boiling
point with automatic preparation of the fractions in
temperature AET or Volume . The only operator
intervention is when changing pressure set point , he has
to recover the fractions from the previous step. The
program will memorized all analog and digital data.
Automatic first drop detection
„ Automatic print out of final report with customer
configuration .
Automatic control from IBP to FBP.
„Several options are available such as heating column
jacket, Cryoplunger for vacuum trap
Automatic fractions collector
Automatic cleaning program.
Run in °C or °F , in mmHg or mBar.
Extensive library of distillation
programs up to 50 .
Data storage of distillation runs up
to 50
For information please contact:
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
Phone:(281)
(281)334
334--5015
5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com
AUTOMATIC
AUTOMATIC TBP
TBP DISTILLATION
DISTILLATION
GECDIST
GECDIST type
type EE Version
Version V6
V6
As per ASTM D2892
External PC104 Controller
GECDIST type E V6
„ GECDIST type E unit includes all
ASTM D2892 glassware, Head and
flask probes, electronic pressure
sensor 100 mmHg,level follower
system to control volume and
distillation rate, automatic fraction
collector for 12 positions , external
embedded PC104 with vacuum control
, vacuum pump , condenser cooling
bath,
A comprehensive user friendly software allows the
operator to access several graphic screens with synoptic
display , curves display , distillation and calibration
parameters files , maintenance and diagnostic screens.
Automatic D5236 distillation unit GECDIST type E V6
From 2L up to 10L Glass flasks
„ Select a distillation program from the library and press
the key START. The GECDIST V6 program will
automatically control the initial heating, IBP detection, first
drop detection , distillation control up to the final boiling
point with automatic preparation of the fractions in
temperature AET or Volume . The only operator
intervention is when changing pressure set point , he has
to recover the fractions from the previous step. The
program will memorized all analog and digital data.
Automatic debutanisation step
„ Automatic print out of final report with customer
configuration .
Automatic control from IBP to FBP.
„Several options are available such as heating column
jacket, Cryoplunger for vacuum trap
Automatic fractions collector
Automatic cleaning program.
Run in °C or °F , in mmHg or mBar.
Extensive library of distillation
programs up to 50 .
Data storage of distillation runs up
to 50
For information please contact:
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
Phone:(281)
(281)334
334--5015
5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com
AUTOMATIC
AUTOMATIC CRUDE
CRUDE OIL
OIL
DEHYDRATION
DEHYDRATION UNIT
UNIT –– DH87
DH87
ASTM D2892 , D5236 methods
crude samples to be dehydrated
„ The DH87 unit is specially designed for
crude evaluation laboratories to remove water
from raw crude prior to performing D2892
distillation with quantification of water content
and safe operation without any operator
intervention .
„ Upon the type of crude and water content
the DH87 allows to run between 600ml to
1500ml per Hour. Or even twice this capacity
with the DH87-TWIN model
„ After setting the parameters , load the
sample to be dehydrated into the sample
vessel, record the weight and start the dosing
pump. During the process run , more sample
can be introduced for dehydration .
DH87 Mono reactor unit
Performs continuous automatic
dehydration of crude oil samples.
Dehydrate to less than 0.1% content ,
petroleum crude oil with up to 42 %
Continuous automated operation
Protect your TBP D2892 glassware
investment
We are also offering a model DH87
TWIN for higher capacity .
„At the completion of the run record the
weight of all fractions recovered for weight
balance report .
„The light ends will be trap in a
debutanisation traps . An optional
cryoplunger can be delivered to avoid using
dry ice in such traps.
ORDERING INFORMATION:
Cat # 3DH87
Automatic Dehydration unit complete with baths
OPTION
Cryoplunger –90C FT900
For information please contact:
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com
GC
GC SIMULATED
SIMULATED DISTILLATION
DISTILLATION SOFTWARE
SOFTWARE
As per ASTM D2887,D3710,D5307,
D6352 and all Simdist methods
CHOICE TO USE :
- Any ASTM Simdist methods or your
own
- Suitable for Simdist method
development
- Standard IFP methods :
- CSD from 35 to 650°C
- HTSD from 174 to 720°C
INTUITIVE and EASY TO USE
- Quantitative Mode with internal or
external standards or without
standard.
- Two modes of processing data:
Post Run Mode or Reprocessing
Mode .
- On screen viewing of results ,
calibration graphs, and Simulated
distillation graphs.
- GLP compliance
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
Phone:(281)
(281)334
334--5015
5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
Email::[email protected]
[email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com or
orwww.gtinstruments.com
www.gtinstruments.com
Full catalog and Demo
CD available upon
request we can install
Chromdis on your
current GC hardware or
we will offer a complete
turnkey GC system with
the methods of your
choice . Chromdis the
only universal GC
software for Simulated
Distillation
GC
GC DETAILED
DETAILED HYDROCARBON
HYDROCARBON ANALYSIS
ANALYSIS
SOFTWARE
SOFTWARE
As per ASTM D6730 , 6733
- Detailed Hydrocarbon Analysis.
- Analysis by hydrocarbon groups
(PONA, PIONA,…) by carbon number.
- Quantification:Weigh,Volume ,Mole%.
- Simulation of fractions.
- Simulated distillation report.
- Physical Properties determination
such as RON,MON , RVP,Sg, Etc..
- Determination of carbon,hydrogen,
oxygen,sulfur and nitrogen content.
- Graphic validation and comparaison
of chromatograms.
- Simulation of blending of several
gasoline effluents .
- Carburane can be used on any GC
hardware and integration PC
workstation .
- Only one GC to analyze all gasoline
refinery bases such as Naphta, Straight
run , Reformates,, FCC, Isomerisation ,
finished motor gasoline and more ….
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com or
orwww.gtinstruments.com
www.gtinstruments.com
Full catalog and Demo
CD available upon
request we can install
CARBURANE on your
current GC hardware or
we will offer a complete
turnkey GC system with
the IFP methods of your
choice . CARBURANE
the only universal GC
software for DHA
analysis.
More than 10 databases
from IFP result of 10
years research .
For information please contact:
GECGEC-TAN
TAN Total
TotalAcid
AcidNumber
NumberTitrator
Titrator
ASTM D664 with Micro method capability
Background
The GEC - TAN total acid number titrator has been
designed to offer maximum specifications and
features whilst being priced at a very competitive
level. This titrator conforms to ASTM D664 for
determination of acidic constituents in petroleum
products, lubricants and transformer insulating oils.
Optional kit for Micro sample method allowing to
reduce the amount of reagents used and keeping the
accuracy of the ASTM method
• User-frendly instrument.
• Easy to use. Provides precise results even for non
specialized users.
• Specific titration programs depending on the
expected TAN of the sample.
• Results in mg KOH/g.
• Data Logger for the last 50 titration results.
• Transmission of results to printer or PC.
• High precision 10ml syringe.
• Resolution 1/40,000 of syringe volume.
• 5 year warranty.
For information please contact:
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com
GEC-TAN
GEC-TANTotal
TotalAcid
AcidNumber
Numberautomatic
automaticTitrator
Titrator
Specifications & Features
Non-volatile memory
operators
Languages
Display
Keypad
Syringe volume
Resolution
Dispensing accuracy
Dispensing reproducibility
Liquid contact materials
Inputs and outputs
connector.
Power supply
Electrical safety
EMC
Permitted temperatures
Enclosure
Physical parameters
3 titration programs depending on TAN content,
Blank titration, Clock/calendar.
Header texts:2 lines x 40 characters. Name of up to 4
Up to 50 results stored in Data Logger
English, Spanish, French, Italian
Graphic backlit LCD, 128 x 64 dots
Membrane, 7 keys, guaranteed up to 6 million
strokes per key
Material: PET with protective treatment
Standard syringe 10 ml
1/40000 of syringe volume
(as relative error) ” 0.2 % for volumes higher than
10 % of syringe
± 0.1 % for volumes higher than 10 % of the syringe
Syringe: borosilicate glass and PTFE
Electrovalve: PTFE and KEL-F. Tubes: PTFE
Differential measurement: 2 BNC connectors.
For external keyboard, miniDIN connector.
RS232C bidirectional for PC or printer, telephone
RS232C for balance, telephone connector
Stirrer control: On/Off and speed, RCA connector
110 – 240 V AC, 50-60 Hz
Meets EC, EN 61010
Meets EC, EN 50081-2 and EN 50082-2
Operating: 10 – 40 ºC. Storage: 10 – 50 ºC
” 80 %, relative humidity, non condensing
ABS and enamelled steel
Weight: 4 kg approx. Dim : 130 x 160 x 300mm
GECGEC-KFV
KFVKarl
KarlFischer
Fischervolumetric
volumetricAuto
AutoTitrator
Titrator
ASTM D1364 D3401 D4377 D4672 E203
D5460 D5530 E180
Background
The GEC-KFV Volumetric Karl Fischer titrator has
been designed to offer maximum specifications and
features whilst being priced at a very competitive
level. This fully programmable titrator offers several
user programs for titration and standardisation.
•2 x 5ml syringes – one to be used for the
KF reagent and the other for automatic
dosing of a standard for the titre. The second
syringe can also be used for a different factor
reagent or possibly special reagents for
ketone / amine samples.
• 2 x built-in peristaltic pumps – one for
dispensing the solvent into the titration
vessel and the other for emptying the vessel.
• Automatic air bubble elimination.
• Automatic rest cycle (standby mode) if not
used for 10 minutes.
• Intelligent control of drift value.
• Results in ppm, mg/L, %, etc.
• 5 year warranty
For information please contact:
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com
GEC-KFV
GEC-KFVKarl
KarlFischer
FischerVolumetric
VolumetricTitrator
Titrator
Specifications & Features
Non-volatile memory
Languages
Display
Keypad
Measuring ranges
Syringe volume
Resolution
Dispensing accuracy
Dispensing reproducibility
Liquid contact materials
Inputs and outputs
connector.
Power supply
Electrical safety
EMC
Permitted temperatures
Enclosure
Physical parameters
Up to 10 titration programs, Clock/calendar,
Header texts: 2 lines x 40 characters. Name of up to
4 operators
Program comments: 8 lines x 40 characters
Up to 50 results stored in Data Logger
English, Spanish, French, Italian
Graphic backlit LCD, 128 x 64 dots
Membrane, 7 keys, guaranteed up to 6 million
strokes per key,
From 0.1 mg up to 100% water
Standard syringe 5 ml
1/40000 of syringe volume
(as relative error)
” 0.2 % for volumes higher than 10 % of syringe
± 0.1 % for volumes higher than 10 % of the syringe
Syringe: borosilicate glass and PTFE
Electrovalve: PTFE and KEL-F. Tubes: PTFE
Polarised electrode, BNC connector.
For external keyboard, miniDIN connector.
RS232C bidirectional for PC or printer, telephone
RS232C for balance, telephone connector
Stirrer control: On/Off and speed, RCA connector
110 – 240 V AC, 50-60 Hz
Meets EC, EN 61010
Meets EC, EN 50081-2 and EN 50082-2
Operating: 10 – 40 ºC. Storage: 10 – 50 ºC
” 80 %, relative humidity, non condensing
ABS and enamelled steel
Weight: 4 kg approx. Dim : 130 x 160 x 300mm
GECGEC-Aquamax
AquamaxCoulometric
CoulometricKarl
KarlFischer
FischerTitrator
Titrator
ASTM D1533 , D4928 , D6304, IP386,
API MPMS Chapter 10.9, BS 60814 ,
and user defined methods
Background The GEC-Aquamax has been developed in
response to many suggestions and comments from our
customers in laboratories, off-shore and in the field. The
built-in battery and optional carry case, provide the
versatility required by the laboratory and also the ease of
use and portability required by the field engineer.
Easy to Use Simple to programme so that only a single
button needs to be pressed for a titration, everything else is
automatic.
The unique Low Drift Cell glassware design is by far the
easiest to use and also the most robust. The “O” ring
system allows the joints to seal completely without the use
of grease or Teflon sleeves. Hassle free assembly and
disassembly.
Results & Records The built-in high speed printer
provides hard copy of results and even allows duplicate
print outs if required. Results can also be downloaded via
the Results Manager software package onto a pc
spreadsheet format.
Spares & Accessories The GEC- Aquamax is supplied
ready for operation. A comprehensive glassware pack
including electrodes, vessel, leads, syringe, printer paper,
etc, is supplied as standard. A calibration certificate and 24
month warranty are also provided.
Reagents Specially formulated to provide optimum
performance with all makes and models of coulometric Karl
Fischer titrators, our unique reagents provide improved
sample miscibility and solubility. Cou-Lo Formula reagents
are packaged in single-shot screw top bottles containing
100ml anode reagent and 5ml easy-snap ampoules of
cathode reagent. Standard carton contains 8 anode
charges, 8 cathode charges and 2 water standards.
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com
Cou-Lo
Cou-LoAquamax
AquamaxKarl
KarlFischer
FischerTitrator
Titrator
Specifications & Features
„ Titration method
Coulometric Karl Fischer titration
„ Electrolysis control
Patented “ACE” control system
„ End point detection
AC polarisation
„ End point indication
Visual display/print out/acoustic beep
„ Display
40 character alphanumeric backlit LCD
„ Measuring range (possible)
1µg – 100mg water
„Measuring range (typical)
1µg – 10mg water
„Moisture range
1 ppm – 100% water
„Max. sensitivity
0.1 µg
„Max. titration speed
2.0 mg per minute
„Max. current
400 ma
„Drift compensation
Automatically controlled
„Start delay time
0 – 30 minutes, user selectable
„End delay time
0 – 30 minutes, user selectable
„Power supply
90-264V AC, 47-63 Hz. 12V DC car adapter/intern.battery
„Precision
10-100µg ±3µg, 100µg-1mg ±5µg, above 1mg ±0.5%
„Calculation modes
Weight/weight, user programmable Weight/dilution ratio,
user programmable , Volume/density, user programmable
Volume/volume, user programmable
„Display format
µg, mg/kg, ppm, %
„Print format
µg, mg/kg, ppm, %
„Statistics
max, mean, min values upto 99 runs
„Method storage
10 user programmable methods
„Sample ID number
User programmable
„Printer
42 character high speed thermal printer
„Stirrer speed
Microprocessor controlled
„Dimensions
250 x 245 x 120 mm
„Weight
3 kg
„Calendar/clock
Analysis time & date print out
„Battery low indicator
Display & print out indication
For information please contact:
VISCO
VISCO TUBES
TUBES WASHER
WASHER
Model
Model VISCO
VISCO WASH
WASH
For all type of capillary viscosity method
tubes
„ The VISCO WASH includes a heating rate controller
for the heating reactor mantle , a timer , a glass reactor
and viscometer tubes holder, and a top condenser
cover. The utilities required are a power supply 110V or
220V and a tap water supply .
„ The VISCO WASH will clean up 6 capillary viscometer
tubes in 5 to 20 minutes even the dirtiest ones such as :
polymerized products , tar , resins , asphalt, ……
„ Only 1 liter of solvent non aromatic and non
flammable is necessary per week .
„ The very gentle cleaning process allows to reduce the
calibration frequency of the viscometer tubes.
„ The instrument is a closed system which drastically
reduces operator exposure to the solvent .
„ The VISCO WASH is easy to operate. We
recommend to install such unit under a hood as a built in
valve allows to drain the dirty solvent .
Automatic Viscosity Tubes Washer
Cleans up to 6 viscometer tubes at
a time such as Cannon, Fenske,
Ubbelohde,Zeitfuchs,Asphalt ….
Saves operating time
Reduces solvent disposal
Reduces calibration turn over
Environmentally safe
„ With the VISCO WASH you can use any kind of
solvent with boiling point from 65°C to 130°C . Our
customer service department will provide the
specifications of a non aromatic and non flammable
solvent with high cleaning power . All parts in contact
with the solvent are made of glass , PTFE or Stainless
Steel .
„ Hundreds of units have been used worldwide for
several years , join the group and keep your operators
happy .
For information please contact:
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com
BULK
BULKDENSITY
DENSITYTESTER
TESTER
as per ASTM D4164
Description/Overview DENSI-TAP is designed to measure the bulk
density of both powders and formed particles (maximum size about 5
mm).
It complies with ASTM standard D4164. The sample is poured into a
graduated cylinder (usually 250 ml) hinged on a tapping device.
A four-digit taps counter is included, programmable to the required
number of taps (usually 1000).
When tapping is completed, the tapped volume is read on the cylinder
graduation.
USE DENSITAP TO ASSESS POWDER FLOWABILITY
The flow properties of powders are important not only in the
pharmaceutical and catalyst industries, but also whenever powder
movement is necessary.
Many methods have been proposed to estimate the flow properties of
powders. Most conveniently, the powder flowability can be determined
through the Hausner Ratio, is the ratio between the tapped and the
loose-packed densities of the powder.
DENSI-TAP is a bench instrument
and is compliant with CE
specifications. .
DENSI-TAP is the best choice for such measurements.
Technical data
Power Supply
DENSI-TAP control
panel
220V 50HZ 1 A
Weight
25 kg
Size (Width x Height x Depth)
320 x 400 x 550 mm
Sample particle size
5 mm max
Reproducibility
1.5%
Compliant with ASTM standard D4164
110V/60Hz version available on request
For information please contact:
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com
DENSIPRESS
DENSIPRESSSeries
Series
Bulk
BulkDensity
Densityand
andElectrical
Electricalresistance
resistanceunder
underpressure
pressure
as per custom built methods
Description/Overview
The determination of the relationship between powder bulk
density and applied pressure provides relevant information for
the optimization of tableted materials like carbons, ceramics and
catalysts.
DENSIPRESS is an appliance to measure the bulk density of a
powder as function of the applied pressure.
DENSIPRESS/R also measures the electrical resistance. Both
instruments are equipped with a cylindrical sample container
(diameter 20 mm, length 250 mm), where the powder is loaded.
Copper cylinders with different lengths allow to change the
sample volume.
The sample container, Teflon-lined in DENSIPRESS/R, can be
detached from the basement for easier removal of the powder.
In DENSIPRESS/R two wired copper disks placed at the
bottom of the piston and of the sample container allow to
measure the electrical resistance of the powder through an
ohmmeter.
Technical data
Power Supply
Battery operated
Weight
50 kgs 110 Lbs
Size (W x H x D ) 200 x 820 x 250 mm 7.9 x 32.3 x 10.0 Inches
DENSIPRESS and DENSIPRESSR are compliant
with CE specifications
Color
Blue and Black
Maximum load
150 Kgs ( other range upon request )
Typical max applied pressure : 45-50 Bar 650 –750 psi
Maximum useful sample : 6 to 7 ml
RS232 PC connection : included
Rechargeable battery
110V/60Hz version available on request
DENSIPRESS
DENSIPRESSSeries
Series
Bulk
BulkDensity
Densityand
andElectrical
Electricalresistance
resistanceunder
underpressure
pressure
Application note
Control
Whells
Digital
display and
controller
Teflon
cylinder
and copper
disk
Before testing, the bulk density of the powder shall
be measured in a glass cylinder with the same
diameter of the sample container, using exactly the
same procedure to be used for loading it. The height
of the powder in the sample container can thus be
calculated from the previously measured bulk density.
Then the piston is shifted up to the upper level of the
powder, readable on the graduated bar. By means of
two wheels (coarse and fine) the piston is displaced
down at suitable intervals and each time the piston
level (graduated bar) and of the applied load (digital
display) are noted. It is advisable to wait a few
minutes before reading the value of the applied load
to allow any compressed air to get out of the sample
container.
The relation between the bulk density (from the
volume occupied step by step by the powder and its
weight) and the applied pressure (from the load and
the section of the sample container) can be
determined by this method .
For the measurement of the electrical resistance, an
ohmmeter (included in the equipment) is connected to
the two copper disks terminals.
We are available to discuss any problem related to the
above-described measurements.
For information please contact:
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
Phone:(281)
(281)334
334--5015
5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
Email::[email protected]
[email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com
ROTAB
ROTABSeries
SeriesABRASION
ABRASIONIN
INROTATING
ROTATINGDRUM
DRUM
as per ASTM D4058
Description/Overview Abrasion in solid materials occurs because of
the rubbing of solid pieces against each other (or any mechanical
component). The rubbing typically takes place during transportation, in
vessels or pneumatic, while loading and during any handling of the
material. Abrasion leads to the formation of finer dust and to the
consequent loss of precious material or valuable features.
Therefore, abrasion resistance is a property of the utmost importance for
industrial catalysts. It also provides meaningful information for other
industrial products (pharmaceutical tablets, fertilizers, sugar and
ceramics).
ROTAB is a rotating cylinder abrasimeter measuring the abrasion
resistance of solid materials (granules, pellets, etc.).
Features :
AISI 304 watertight rotating cylinder with
bending drum for fast cleaning
Easy loading and discharge of the tested material
Rotating Speed : 60 rpm for ROTAB-AS
In the ROTAB-AS/S the rotation rate of the vessel can be set in the
range 30-90 rpm. The constant-rotation version of the instrument
(ROTAB-AS) features a fixed rotation rate of 60 rpm.
Both instruments were designed according to the ASTM standard
method D4058, covering the particle size range 0.85-20 mm.
Measurements can also be performed on larger size materials.
30 to 90 rpm adjustable for ROTAB-AS/S
Thermal magnetic safety switch
Technical data
Start – Stop- Manual Switches .
Power Supply
Programmable revolution counter
Weight
Safety Grid cage enclosing the rotating drum.
Size (Width x Height x Depth)
Color
Rotation rate
220V 50HZ 3A
68 kg
550 x 850 x 600 mm
white and black
30-90 rpm (ROTAB-AS/S)
60 rpm (ROTAB-AS)
Rotating drum
AISI 304
Safety cage
PMMA
Revolution counter
up to 9999
(automatic stop at preset number of revolutions)
Reproducibility
5%
Compliant with ASTM D4058 (particle size range 0.85-20 mm)
110V/60Hz version available on request
Optionals (supplied on request)
No.20 ASTM sieve with pan and cover
Analytical balance to 0.01 g
ROTAB
ROTABSeries
SeriesABRASION
ABRASIONIN
INROTATING
ROTATINGDRUM
DRUM
DETAILS of ROTAB units
as per ASTM D4058
Application note
Rotab AS-S Rotation rate regulator
The ASTM standard method D4058 has been designed for catalysts, but
can be conveniently applied, as it is highly consolidated and very
precise (about +/- 1%), to other solid materials, preferably within the
0.85-20 mm size range. The standard amount of material to be tested is
100 g, but correct results can be obtained with smaller samples. The
standard rotation rate is 60 +/- 5 rpm, but it has a small influence on the
abrasion data, except for magnetic materials. The total number of
revolutions is 1800. The percentage of fines formed after such
revolutions, sieved below 0.85 mm, gives the measurement of the
material’s abrasion resistance.
The official text of the method can be found at www.astm.org
Catalyst pretreatment
The catalyst sample may require desiccation before testing.
Some practical examples are:
a) Fines formation during catalyst loading in the reactor.
The catalyst should not be dried.
Rotab Control panel
b) Fines formation during reactor operation.
When the catalyst is activated in the reactor, the abrasion test has to be
conducted on the activated sample.
When the catalyst is not activated, it should be dried at approximately
reaction temperature.
Problems arising from low abrasion resistance of catalysts
Rotab – Safety Lock system
a)
Environmental problems during reactor loading.
b)
Pressure drop increase in axial reactors.
c)
Bypass formation in radial reactors.
d)
Product contamination, in particular when solid.
Abrasion resistance specifications for some industrial catalysts
For information please contact:
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com
Abrasion resistance must be measured for any catalyst used in fixed-bed
and trickle-bed reactors. For such catalysts, a maximum value of fines
formed in the ASTM D4058-96 test is usually specified. Catalyst users
should check this value for each batch of catalyst they purchase. The
usual specifications of abrasion resistance for several industrial catalysts
are reported hereunder.
PTA
1.5% max
Ammonia (prereduced)
2.0% max
Hydrotreating
2.0% max
Formaldehyde
3.0% max
Methanol
3.0% max
Styrene
3.0% max
LTS
5.0% max
HTS
8.0% max
CRUSH
CRUSHSeries
SeriesCRUSHING
CRUSHINGSTRENGTH
STRENGTHTESTERS
TESTERS
as per ASTM D4179 D 6175 D7084
Description/Overview The crush strength is the resistance of a solid to
compression, a property of paramount importance not only for industrial
catalysts, but also for ceramics, pharmaceutical tablets and many other
solid materials. In the case of catalysts it is noteworthy that many plant
shutdowns occur due to mechanical failure of the catalyst (and not due
to its loss of activity).
Technical data
Power Supply
220V 50HZ 2 A
Weight
35 kg
Size (Width x Height x Depth)
310 x 650 x 460 mm
Color
Maximum load
white and black
CRUSH-BK
300 kg or 500 kgs
CRUSH-SP
50 kgs
(different loads available on request)
Piston advancement rate
10 mm/min
Speed of measurement
single pellet
40-50 tests/hour
bulk (CRUSH-BK only)
10-15 tests/hour
Sample size range
1-20 mm
Reproducibility
Single pellet (average of 50 pellets)
5%
Bulk (average of 5 measurements)
5%
Compliant with ASTM standards D4179 and D6175
110V/60Hz version available on request
Data interface
USB 2.0 PC connection for models
(CRUSHBK/PC, CRUSH-SP/PC)
30 mV recorder output for models
(CRUSH-BK, CRUSH-SP)
CRUSH-BK, fully compliant with ASTM standards D4179 and D6175,
is an instrument for measuring the crush strength of solid materials
having regular, or almost regular, geometrical shape (like spheres,
cylinders, rings and similar). Their size can vary in the range 1 - 20mm.
CRUSH-BK is based on a dynamometer measuring the force
progressively applied to the solid sample during the advancement of a
piston. The force applied increases until the solid breaks and collapses
into small pieces and, eventually, powder. The corresponding value of
the collapsing force is defined as crush strength. When the material is
composed of irregular particles, the measurement of the so-called 'single
pellet' crush strength cannot be performed, but the 'bulk' crush strength
must be determined instead.
CRUSH-BK allows to make both single pellet and bulk
measurements with the same instrument and features a maximum
load in the range 300-500Kg.
CRUSH-SP, applying much lower loads (30 kg max), is recommended
when bulk measurements are not required and the pellets under
examination are not very resistant. Both CRUSH-BK and CRUSH-SP
feature a digital display, providing the crush strength in Newton, and an
exit for a 30 mV recorder, where the shape of the crush peak can be
observed.
The maximum load applicable of CRUSH-BK and CRUSH SP can vary
according to customer's requirements (Our specialists can assist
customers in the selection of the most suitable instrument).
CRUSH-BK/PC and CRUSH-SP/PC are the most advanced
configurations of the Crush series instruments, equipped with a USB 2.0
PC connection and a data-treatment software.
CRUSH
CRUSHSeries
SeriesCRUSHING
CRUSHINGSTRENGTH
STRENGTHTEST
TEST
as per ASTM D4179 D 6175 D7084
Application note
CRUSH-BK and CRUSH-SP are dynamometers of general use for compression
measurements. As far as catalysts are concerned, the ASTM standard methods D4179
and D6175 are recommended. D4179 refers to tableted pellets, which can be measured
in either axial or radial way. As the axial crush strength is much higher, it is not
representative of the catalyst behavior in the reactor, therefore the radial crush strength
must be measured for industrial purposes (the type of crush strength measured must
always be specified).
Crush Piston cell
D6175-98 procedure refers to extrudates (the radial measurement can be only
performed in this case). The radial crush strength is usually expressed in kg/mm or
Newton/mm The official text of the two methods can be found at www.astm.org
A new ASTM method for bulk crush strength measurements (D7084-04) has become
available in 2004. A standard faster simplified procedure developed is available to our
customers.
Catalyst pretreatment The crush strength of a catalyst is not appreciably dependent on
reactor loading, but mainly on reactor operation. When the catalyst does not require
activation, the crush test should be conducted on fresh dried samples. When the catalyst
has to be activated in the reactor, only measurements on activated samples are significant.
Problems arising from low crush strength of catalysts Pressure drop increase in axial
reactors or Bypass formation in radial reactors.
Crush strength specifications for some industrial catalysts
CRUSH SW software screen
For information please contact:
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain
69450
ST
69450 STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Phone: +33 (0)4 72532393
Fax:
Fax:+33(0)4
+33(0)478472803
78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
Phone:(281)
(281)334
334--5015
5015
Fax:
Fax:(281)
(281)538
538––3622
3622
Email
Email::[email protected]
[email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com
Single-pellet radial or, for irregularly shaped particles, bulk crush strength must be
measured for any catalyst used in fixed bed and trickle-bed reactors. A minimum value of
the force required to break the pellets is usually specified for single-pellet crush strength
(such value should not refer to axial measurements).
For bulk crush strength, either the minimum pressure giving 1% fines (ASTM D7804-04),
or the maximum percentage of fines formed under the pressure of 23 bar (our procedure)
are specified.
Examples of currently used crush strength specifications of some industrial catalysts:
Single-pellet radial
Bulk**
Alumina spheres
7 kg min
Alumina spheres
LTS pellets*
5 kg min
Hydrotreating extrudates
HTS pellets*
10 kg min
Alumina extrudates 20% max
Methanol pellets*
8 kg min
Active carbon granules
Formaldehyde rings 2 kg min
Hydrotreating extrudates 3 kg/mm min
Styrene extrudates
2 kg/mm min
10% max
5% max
1% max
15% max
ATTRI
ATTRISeries
SeriesATTRITION
ATTRITIONRESISTANCE
RESISTANCEof
ofPOWDERS
POWDERS
as per ASTM D5757
Any powder, when moved, is subjected to the attrition phenomena,
leading to the undesirable formation of fines. The measurement of
attrition resistance is therefore indispensable, especially for powder
catalysts in both fluid bed and slurry reactors.
ATTRI-AS is an instrument measuring the attrition resistance of any
type of powder. It is based on the air jet principle and strictly follows
ASTM standard method D5757. Nonetheless, it can also be used
according to different procedures. Typical powders to be measured by
this technique range between 10 and 180 micrometers in size.
Attri - Glass Tube ATTRI-AS is composed of a special stainless steel
attrition tube, where the powder is stressed by high-speed air jets,
coming from precision-drilled sub-millimeter nozzles. They provide an
accelerated simulation of the attrition phenomenon occurring in reality
during a period of months. Ahead of the attrition tube a glass-made
settling chamber allows to look at the powder during the treatment. Both
the air pressure and the flow rate measurement instruments are located
before the attrition tube. Finally, an assembly for fines collection is
located ahead of the settling chamber. The air flow can be humidified
through a water saturator. The percent loss of fines after a specified time
of treatment gives a measurement of the attrition resistance.
The new ATTRI-AS also comes in an advanced configuration (ATTRIAS/MFC), featuring a mass flow controller (MFC), allowing an even
more accurate measurement of the air flow.
Technical data
Power Supply
220V 50HZ 1A
Weight
50 kgs 110 Lbs
Size (W x H x D ) 450 x 1900 x 500 mm 17.8 x 74.8 x 19.7 Inches
ATTRI-AS and ATTRI-ASMFC are compliant with
CE specifications
Color
white
Timer with alarm
included
Sample size range 10-180 micrometers
Compliant with ASTM standard D5757
Flow rate meter
Rotameter (for model ATTRI-AS)
Mass flow controller (for model ATTRI-AS/MFC)
110V/60Hz version available on request
ATTRI
ATTRISeries
SeriesATTRITION
ATTRITIONRESISTANCE
RESISTANCEof
ofPOWDERS
POWDERS
as per ASTM D5757
Application note
Attri Glass
Tube
The ASTM procedure The ASTM standard method D5757-00 has been
primarily designed for catalysts, but can be effectively applied also to
other powdered materials in the 10-180 micrometers size range. The
standard amount of material to be tested is 50 grams and the standard air
flow rate to be used is 600 l/h. The official text of the method can be
found at www.astm.org
Alternative testing procedures can be supplied by our specialists.
Attri Attrition
Tube Air
Inlet
Catalyst pretreatment
For FCC catalysts the standard method D5757 recommends pre treating
at 565°C and subsequent addition of 10% water by weight. For other
types of powder the pretreatment should be chosen case by case. our
specialists will provide full assistance on the issue.
Problems arising from low attrition resistance of catalysts
Attri - Mass
Flow
Controller
Attri Manometer
·
Excessive catalyst consumption in fluid bed reactors.
·
Difficult catalyst filtration in slurry reactors.
·
Loss of powder after pneumatic conveying (any type of powder).
Attrition resistance specifications
Due to the relatively recent introduction of this standard method, no
widely agreed specifications for fluid bed or slurry catalysts are
presently known. Suggestions can be given by our specialists.
For information please contact:
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com
AUTOMATIC
AUTOMATICCENTRIFUGE
CENTRIFUGEfor
forCRUDE
CRUDE&&OIL
OILTESTS
TESTS
As per ASTM D91 ,D96, D1796,
D2273,D2709, D2711, D4007
„DESCRIPTION The centrifuge NCP Tech main
applications are the determination of water and
sediment on mineral oils, as well as the
characterization of lubricants by centrifugation. Fitting
different adapters it allows to perform up to 10 different
standards.
Automatic Centrifuge NCP TECH model
ORDERING INFORMATION
Cat # 29408 • Complete equipment without
accessories
Supply: 230V – 50Hz or 115V – 60Hz
Dim.: 540 x 650 x 400 mm Weight: 55 Kg
NECESSARY ACCESSORIES
29405 Rotor 4 x 100mL, 3000 RPM max, 2113
RCF max, with 4 buckets
29407 Adapters for rotor 29405 for pear-shaped
tubes
19438 Pear-shaped tube 100mL with 1,5mL
graduated tip
19437 Pear-shaped tube 100mL with 3mL
graduated tip
29406 Adapters for rotor 29405 for 6’’ coneshaped tubes
19321 6’’ cone-shaped tube 100mL (167 mm)
29404 Rotor 4 x 100mL, 3000 RPM max, 2425
RCF max, with 4 buckets
19319 8’’ cone-shaped tube 100mL (203 mm)
For information please contact:
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email:
[email protected]
Email: [email protected]
http://www.gtinstruments.com
http://www.gtinstruments.com
Serving
ServingNorth
North&&South
SouthAmerica
America
„FEATURES Induction motor maintenance free Controlled by microprocessor - Noise level <60dB Automatic rotor recognition, it shows on screen max.
R.P.M., max. R.C.F. and max. capacity avoiding
overspeed- Temperature regulation from ambient +5°C
to +70°C - Open selectable : automatic at the end of
the cycle or manual pressing keypad - Temperature
selectable on °C/°F - RPM / RCF adjustable along run
„ USER FRIENDLY TFT touch screen - RPM
regulation on steps of 100, RCF on 10 x g, time 1 to 99
and hold position - Up to 16 memories - Time starts at
set RPM / RCF or from 0 RPM / RCF selectable Buttons lid, start, stop and short cycles - Braking ramps
5 to 180 seconds - Motorized double lid lock - Preheating program with selectable temperature - Along
the run shown a graphic visible from long distances,
not required stay close to the unit -Rotor and adapters
list on memory with max working values „ SAFETY FEATURES Hazard reduction system
(optional) - Continuous checking and follow up device
and accessories -Chamber of centrifugation in
stainless steel, guard ring around - Temperature
sensor inside the chamber - Lid dropping protection,
and emergency overriding - Unbalance switch off Rotor does not run until the lid is closed, and lid cannot
be open until the rotor stops.- Safety system against
overheating .
AUTOMATIC
AUTOMATIC FLASH
FLASH POINT
POINT
CLEVELAND
CLEVELAND OPEN
OPEN CUP
CUP –– NCL
NCL 440
440
As per ASTM D92, ISO 2592, IP 36
„ The NCL 440 flash point opened-cup is strictly in
accordance with the above-mentioned standards. It is
equipped with two ignitors: electric and gas. The gas
flame is monitored by a thermocouple for improved
safety.
„ The NCL 440 is built with the state of the art
technology and the large digital display allows test in
progress to be viewed at distance.
Automatic Cleveland Open
Cup NCL 440
First instrument
fully upgradeable to
new standards via
a PC
„ The flash point and the fire point are detected
automatically using a flame ionization detector. A
optional sample changer with 6 cups is available for
unattended operation. A new sample may be inserted at
any time during a test. A priority analysis function is
provided to allow for an urgent test to start.
„ The NCL 440 temperature range is from ambient to
+400°C.
„ The NCL 440 can be connected to a network via an
RS232C output to send data. 100 results are stored in
the instrument’s memory.
ORDERING INFORMATION:
Cat # 40400
Automatic NCL 440 Cleveland
Open Cup with Ticket Printer
OPTION
Cat # 40440
6 Cups Auto-Sample-Changer
Outside measurement (mm) Weight (Kg)
(W) 320 x (D) 580 x (H) 360
Approx. 17
Voltage and frequency 230 V –50/60 HZ
(115 V -60 HZ on request)
„ A comprehensive user friendly software allows the
operator to access menu and enter parameters for
calibration, maintenance and diagnostic via the
keyboard.
For information please contact:
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email:
[email protected]
Email: [email protected]
http://www.gtinstruments.com
http://www.gtinstruments.com
Serving
ServingNorth
North&&South
SouthAmerica
America
AUTOMATIC
AUTOMATICPENSKY
PENSKYFLASH
FLASHPOINTPOINT-NPM
NPM440
440
As per ASTM D93
„ Strictly in accordance with the above mentioned
standard this unit benefits from the latest technology
improvements. For instance, the testing process can
be supervised at distance thanks to a large graphic
display. The instrument can also be used with a
portable C02 gas cartridge kit.
„ Aside the method required by the standard, a
quick search method is available in order to find out
the flash point of unknown samples. The dual
detection system - thermal and ionization - allows to
test all type of products.
„ The NPM 440 is delivered with a flame tip
detector as well as an automatic gas cut-off at the
end of the test process
„ Changing the safety and operating parameters,
calibrating through keyboard, modifying language
and units, performing maintenance have become
easy thanks to the new user-friendly software which
also memorizes the previous test results
„ This instrument also provides :
- display of stirring speed,
Automatic Pensky Flash
Point NPM 440
- temperature curve follow up and print out,
- quick cool down between tests thanks to air
ventilation or external water connection,
- an operating range between 0° and 400 °C.
„ Safety features of the instrument consist of a
flame detector, an automatic gas cut-off in case of
emergency and a connection to a CO2 gas
cartridge..
ORDERING INFORMATION:
Cat # 40300
Automatic Pensky Flash Point with
Ticket Printer and Software
OPTION
• CO2 Cartridge Connection Kit
Outside measurement (mm)
Weight (Kg)
(W) 260 x (D)535 x (H) 500
Approx. 20
Power Supply 230 V 50 HZ Or 115 V -60 HZ
For information please contact:
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
http://www.gtinstruments.com
http://www.gtinstruments.com
Serving
ServingNorth
North&&South
SouthAmerica
America
FULLY
FULLY AUTOMATIC
AUTOMATIC CLOUD
CLOUD and
and POUR
POUR POINT
POINT
NTE
NTE 450
450
As per ASTM D97, D2500
The Pour point describes a procedure for testing the fluidity of a
petroleum product at a specified temperature. The Cloud point is
defined as the temperature of a liquid specimen when the smallest
observable cluster of wax crystals first appears upon cooling under
prescribed conditions.
Products Lubricating oils, distillate and residual oils, Biodiesels.
General Description Display of the detection level ,
Programmable bath temperature in stand by mode, Pt 100 sample
temperature ,Jacket temperature, Display of the cooling set point
levels ,Apparatus and sensors status ,Easy access to the service
parameters ,Storage of the 200 last tests results ,Sample ID,
Operator’s name, Maintenance and calibration protected by
password, Method files: 15 (5 standards and 10 custom built)
„ Pour Point Detection by ultrasonic sensor ,Temperature range
from -75°C to 51°C (Lowest temperature achieved upon external
cryostat bath) ,Temperature measurement resolution : 1°C ,Tilting
intervals : every 3°C or 1°C.
Automatic Cloud and
Pour Point NTE 450
Main Characteristics
„ Mimics the standard methods
„ Detection by specific optical fibre for Cloud Point
„ Detection by ultra sonic sensor for Pour Point
„ Visualisation of the different cooling steps –
detection every 3°C or every 1°C
„ Programmable cooling slope
„ Quick set up of sample jar on measuring head
„ Stand alone or multiple units networking
„ Easy access to maintenance parameters by
software
„ Cloud Point Detection by optical fiber ,Test Intervals of 1°C,
Temperature measurement resolution : 0,1°C, Temperature range
from -75°C to 49°C (Lowest temperature achieved upon external
cryostat bath.
„ Software Computer interface through a user friendly software
accessible by touch screen, Connexion of external PC by Ethernet
cable,Storage of 200 results in stand alone mode, Stand alone or
network multiple units configuration
ORDERING INFORMATION:
Cat Nbr 60300: NTE 450 CPP for determination of CLOUD AND
POUR POINT is delivered complete with Printer, 1 cloud and 1
Pour point tube, instruction manual. CRYOSTAT to be ordered
separately
Cat Nbr 60301: NTE 450 PP For determination of POUR POINT
only 230V - 50 Hz
Cat Nbr 60302: NTE 450 CP For determination of CLOUD POINT
only 230V - 50 Hz
for 115V / 60Hz add 115V to Cat Nbr
„ Easy access to hardware maintenance
„ Option
„ Dimensions 27x50x60 cm Weight :Approx 25 kg
Cat Nbr 23205 Cryostat TLC 80 11 liters (-80°c / +20°C)
For information please contact:
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
http://www.gtinstruments.com
http://www.gtinstruments.com
Serving
ServingNorth
North&&South
SouthAmerica
America
ASTM D 5 - D 217 - D 937 - D 1321 & D 1403 - IP 49 - IP 50 - IP 179 & IP 310
- DIN 51579 - DIN 51580 & DIN 52010 - ISO EN 1426 - ISO 2137 - ISO 3992 & ISO 6298
SCOPE
APPLICATIONS
This test method covers determination of the penetration
of semi-solid and solid bituminous materials.
Semi-solid and solid bituminous materials
“NEW” FULLY AUTOMATIC MODEL OF PENETRATION VALUE DETERMINATION
NPN TECH - REF. 942734 MAIN FEATURES
Built-in user friendly software
Full automatic approach on conductive products & hard bitumen
Four programmable reference positions for the cone holder assembly
Stepper motor for penetration depth as low as 0.01 mm
Programmable Penetration time between 0 and 999 min
Temperature measurement : -10 to 150°C
Range : 0 to 75 mm
Results : in 1/10 mm on full range
Displayed resolution : in 1/100 mm
Position recall for routine tests can be set
Optoelectronic detection of depth penetration
Optional automatic level detection device for bitumen
Three last tests displayed with calculated average
Language : English or French
Connection : 2 USB ports - 1 for printer or keyboard and 1 for PC
Anodized base plate with sample centring device
Adjustable led lamp & magnifying glass
Main keyboard with protective polyester sheet cover
SCOPE OF DELIVERY
REF. 942734 - NPN TECH
NPN TECH delivered with magnifying lens, low voltage illuminator, centring
guide, screw & nut and power cord.
For use on AC 230 V, 50/60Hz - 1 A
DIMENSIONS
(W) 720 x (D) 250 x (H) 330 mm (±16kg)
ADITIONAL ACCESSORIES AND OPTIONS
REF. 27674
Transfer bath, made of glass - to be connected to a water bath
REF. 27673
Transfer bath support with holes dia. 165 x 35 mm for 5 containers
REF. 27794
Constant temperature water bath (range : -30 to +150°C) - Model RE 112 -
REF. 941732
Calibration kit for automatic penetrometer
REF. 9417371
Bitumen automatic level detection device
REF. 11504
ASTM 17C thermometer, range from +19 to +27°C
REF. 11532
ASTM 63C thermometer, range from -8 to +32°C
REF. 11533
ASTM 64C thermometer, range from +25 to +65°C
GREASE MODE
Set of accessories for auto level detection of conductive sample comprising :
REF. 92-035890 Probe cable (dia.2mm / 50 cm length)
REF. 92-033490 Mini grip
REF. 92-033510 Test probe
GT instruments
GECIL Process S.A.S.
PO Box 846 Kemah TX 77565 USA
14, rte de st romain FR-69450 ST CYR au Mont d’or
Phone : +1 281 334 5015 – Fax : +1 281 538 3622 Phone : +33 4 72 53 23 93 – Fax : +33 4 78 47 28 03
[email protected]
www.gecil.com
info @gecil.com
ACCESSORIES AND CONSUMABLES for Bitumen (ASTM D5)
REF. 518063
Standard needle 2.5 g (up to 350 units)
REF. 941737
Needle holder 47.5 g (1 supplier with main equipment)
REF. 941810
Outfit for penetration of bituminous material
including : needle, holder, 50 g weight and 2 containers
REF. 941812
Additional weight 100 g
REF. 941815
Additional weight 50 g
REF. 9418140 Long needle 2.5 g (up to 500 units)
REF. 21712
Pack of 300 Sample containers only one use, 55x35 mm
REF. 518066
Aluminium container, 55 X 35 mm
REF. 9418181 Aluminium container, 55x70 mm (>200 units)
REF. 9418191 Aluminium container, 55x57 mm (up to 500 units)
ACCESSORIES (for lubricating greases - ASTM D 217)
REF. 941739
Grease cutter with blade (210x140x170 mm) ±2 kg
REF. 941736
Outfit for consistency of lubricating grease
including : cone, holder & container
REF. 941737
Cone holder, nickel-plated brass, movable, 47.5 g
REF. 941738
Standard cone 102.5 g
REF. 9417411 Sample container, 76x63 mm
REF. 27322
Spatula 30x200 mm
ACCESSORIES (for consistency of petroleum - ASTM D 937)
REF. 941735
Outfit for consistency of petroleum
including : cone, container & holder
REF. 941737
Cone holder, nickel-plated brass, movable, 47.5 g
REF. 941738
Standard cone 102.5 g
REF. 9417412 Sample container 100 x 65 mm with cover
ACCESSORIES (for consistency of petroleum waxes - ASTM D 1321)
REF. 941737
Cone holder, nickel-plated brass, movable, 47.5 g
REF. 941811
Outfit for consistency of petroleum waxe
including : shouldered needle, container, weight & holder
REF. 941815
Additional weight 50 g
REF. 941816
Needle with shoulder 2.5 g, stainless steel
REF. 941820
Sample container with base plate
REF. 40-881605 Needle 2,5g with certificate
REF. 941810
REF. 941739
REF. 941736
REF. 941735
ACCESSORIES (Penetration tests using one-quarter or one-half scale cone
equipment - ASTM D 1403)
REF. 941742
REF. 941743
REF. 27322
1/4 scale cone (9.38 g)
1/2 scale cone (37.5 g)
Spatula 30 x 200 mm
REF. 941811
SPARE PARTS
Light bulb for REF. 942734
Flexible light for REF.942734
REF. 9417343 Magnifying glass for REF. 942734
REF. 9417341
REF. 9417342
ALTERNATIVE
PENETROMETER - MANUAL MODEL
MANUAL penetrometer including a large table on levelling feet with spirit level,
manual release mechanism and dial indicator in µ0.01 mm. Outfit comprising needle,
holder, sample containers & 50 g weight to be ordered separately.
This manual version is compatible with accessories listed above.
DIMENSIONS
(W) 180 x (D) 180 x (H) 560 mm (±6kg)
REF. 941731
GT instruments
GECIL Process S.A.S.
PO Box 846 Kemah TX 77565 USA
14, rte de st romain FR-69450 ST CYR au Mont d’or
Phone : +1 281 334 5015 – Fax : +1 281 538 3622 Phone : +33 4 72 53 23 93 – Fax : +33 4 78 47 28 03
[email protected]
www.gecil.com
info @gecil.com
EXISTENT
EXISTENTGUM
GUMIN
INFUELS
FUELS
BY
BYJET
JETEVAPORATION
EVAPORATION––P303
P303
As per ASTM D381, IP 131, ISO 6246
The model P303 features:
Exclusive triple digital controllers
ƒ for air temperature (155 ± 0,5°C)
ƒ for steam temperature (232 ± 2°C)
ƒ for both air and steam flows (1000 mI/sec ± 15%).
The two temperature controllers are connected to the
Pt 100 sensor.
Alternative model P302:
Same as above apparatus but for air jet test only,
without superheater
ORDERING INFORMATION:
Five evaporation test sites
recessed in aluminum block
Aluminum block bath is
uniformally heated by several
electrical heating elements
Model P303 has steam
superheater built into the base
Cat # P303
Existent gum bath in fuels by steam-jet
and air-jet evaporation
Cat # P302
Existent gum bath in fuels by air-jet
evaporation only
OPTIONS
Cat # P308
Steam generator 40 lbs per hour, 2KW,
triphase supply only 230/380/416/440V.
Supplied with factory adjusted constant
level device for continuous stable steam
distribution during testing and heat
resistant flexible tubing for connecting to
P303.
Cat # P3081
Air compressor 150/230/240 V single
phase supply, to deliver suitable air
quantity to the five outlets when
performing air jet tests, complete with
flexible tubing for connection to P302
and P303. Reservoir capacity: 250L
Outside measurement (mm)
Weight (Kg)
P303 (W) 770 x (D) 380 x (H) 570
Approx. 60
P302 (W) 770 x (D) 380 x (H) 570
Approx. 45
P308 (W) 750 x (D) 530 x (H) 920 approx
.Approx. 75
P3081 (W) 1200 x (D) 700 x (H) 1050 approx
.Approx. 65
P303/302 Voltage and frequency 230 V - 50 HZ
For information please contact:
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]gtinstruments.com
http://www.gtinstruments.com
http://www.gtinstruments.com
Serving
ServingNorth
North&&South
SouthAmerica
America
PO Box 846 KEMAH TX 77565 USA
Phone : +1 281 334 5015 Fax +1 281 538
3622 email : [email protected]
SCOPE
This test method covers the determination of
kinematic viscosity of transparent and opaque liquid
such as fresh and used engine oils using and
automated Houillon viscometer. In accordance with
ASTM Method D7279
APPLICATIONS
Fresh and used oils, Research and development labs,
Lubricating oil blending, metal industry.
AUTOMATIC HOUILLON VISCOMETER - MODEL NVH 450
MAIN CHARACTERISTICS
- 4 simultaneous tests .Viscosity range : 0,2 to 5000 cSt
- Bath working temperature range: from ambient up to
120°C Bath temperature accuracy: 0.015°C
Accuracy of flow measurement: 0.0 1S.
Solvent tanks included (1 or 2 solvents)
Automatic tube cleaning one by one
Easy calibration (12 tubes can be stored) by reference
fluid . Possibility to calculate the VI from 2 different
tests or between 2 connected
- Easy tube replacement and adjustment
- Electro Valve resisting to hard solvent in standard
-
- All parameters accessible by touch screen .Unique
cleaning system .2 calibration procedure steps
-
QUICK: 50 to 200 seconds per run
LOW COST ANALYSIS
- Small volume samples between 100µL and 400µL
injected by micro pipette
- Small solvent consumption to clean the tubes (between 5
and 10mL).
SCOPE OF DELIVERY
NVH 450 –
reference 60100 -cleaning system and
pump included. Si l ic o n e o il , t ub e s a nd pi pe t t e s t o b e
ord e red separately
Bath features
Capacity
: 11 liters
Medium type : silicon oil 200-10 or water Temperature range
: 40 to 120°C Stability : ± 0.02°C
B a t h r e f r i g e r a t i o n : b y b u i l t - i n c o o l i n g c o i l Nature
of coolant : WATER or external chiller Temperature rising
time from ambient to 120°C : 1h30 Temperature lowering time
from 120°C to ambient with coolant : ± 2 h
CLEAR AND DARK PRODUCTS WITH THE SAME TUBES
Stand alone or network multiple units via ETHERNET
connection WINDOWS® Platform
Electrical features
Frequency : 50/60 Hz
Power supply : 115/230 V
Power consumption : 2 kW
Série
50
75
100
150
200
300
350
400
450
Approximative
Tube Constant
0,016
0,032
0,06
0,14
0,4
1
2
4,8
10
Dimensions
Length : 540 mm
Depth : 340 mm
Height: 762 mm
Weight : ±75 kg
Viscosity in cSt
Mini
Maxi
0,8
3,2
1,6
6,4
3
12
7
28
20
80
50
200
100
400
240
960
500
2000
HOUILLON VISCOMETER TUBES TABLE
ASTM D 445 - ISO 3104 - IP 71 - DIN 51366
SCOPE
This test method specifies a procedure for the determination of the kinematic viscosity of liquid petroleum
products, both transparent and opaque, by measuring the time for a volume of liquid to flow under gravity through
a calibrated glass capillary viscometer.
TV 2000 VISCOMETER BATH
MAIN CHARACTERISTICS
Bath can be operated from ambient +5 up to +230 °C
(41..446 °F). With the use of the built-in cooling coil, span
lies 5°K above the temperature of the cooling liquid. Bath
volume 20 liters. The TV 2000 offers two rows of 3 and 2
lids. These openings of 50 mm dia. will accommodate glass
capillary in holders.
Range
Reading
Used materials inside bath
Setting ±
Offset
Stability* ±
..230°C/..482°F
Standard °C, °F on request
Stainless Steel 304, PTFE
0.1°C
0.01°C
0.01°K
Heating
Heaters
Bath volume
Number of lids
Window
Opening lid
Opening bath
2800 W
3
20 L
3L
140 * 285 mm
51(dia) mm
130*165 mm
SCOPE OF DELIVERY
TV 2000 – Ref.23202
For use on AC 230 V, 50/60Hz – 12ADimensions (wxdxh) 465x300x585 mm
Weight : ±40 kg
MAIN CHARACTERISTICS
TV 4000 VISCOMETER BATH
Bath can be operated fro m ambient +5 up to +230 °C
(41..446 °F). With the use of the built-in cooling coil,
span lies 5°K above the temperature of the cooling
liquid. Bath volume 40 liters. In the stainless steel bath
cover 7 openings with lids. These openings of 50 mm
dia. will accommodate glass capillary in holders.
Range
Reading
Used materials inside bath
Setting ±
Offset
Stability* ±
..230°C/..482°F
Standard °C, °F on request
Stainless Steel 304, PTFE
0.1°C
0.01°C
0.01°K
Heating
Heaters
Bath volume
Number of lids
Window
Opening lid
Opening bath
2800 W
3
40 L
4 + 3 or 4 + 4 L
270 * 285 mm
51(dia) mm
260 * 240 mm
GT instruments
SCOPE OF DELIVERY
TV 4000 – Ref.23200
For use on AC 230 V, 50/60Hz – 12A(wxdxh) 590x300x585 mm W : 41 Kgs.
PO Box 846
KEMAH TX 77565 USA
Phone : +1 281 334 5015 Fax +1 281 538 3622 email : [email protected]
RAMSBOTTOM
CARBON RESIDUE APPARATUS
Model RCD 98000
As per ASTM D524, IP 14, ISO 4262
Metal coking furnace of solid metal constructed of a
cast iron block, accurately machined to accommodate
5 borosilicate glass bulbs, encased in a heavily
insulated shell and electrically heated, 115V volt 60 Hz
to a uniform temperature of 550°C (1020°F). The
instrument is provided with a control bulb made
entirely of stainless steel containing a thermocouple
and compensating lead for connection to electronic
controller with temperature digital display and setting,
with reverse-switch for temperature checking of the
coking bulbs and the control bulb.
ACCESSORIES
LAB-100-994 Coking bulb filling device. ASTM D 524 Apparatus consists of a metal stand to support the
Pyrex coking bulbs and syringes used to fill in the
coking bulbs. All parts are in perfect alignment for
filing. Five-unit, complete but without syringes or
coking bulbs
RAMSBOTTOM
metal furnace
Model RCR 98000
LAB-100-985 Control bulb assembly, stainless steel,
complete with iron-constantan thermocouple, for use in
determining compliance of furnace characteristics with
the performance requirements.
LAB-100-982 Syringe 10 ml capacity, with needle to
fill up the bulbs.
LAB-100-981 — Coking bulbs ramsbottom,
borosilicate glass: with capillary neck, 1,5 to 2 mm
inside diameter set of 10
For information please contact:
GT Instruments
P.O. Box 846 - Kemah, TX 77565-0846
Phone: (281) 334 - 5015 Fax: (281) 538 – 3622
Email : [email protected]
http://www.gtinstruments.com
Serving North & South America
ORDERING INFORMATION:
LT-RCR-98000-M Ramsbottom carbon residue
apparatus, complete with automatic electronic
indicating controller with iron constant
thermocouple, compensating lead, range 50 to
600°C, within the limits specified by ASTM
D524, but without accessories
Voltage and frequency 115 V - 60 HZ
AUTOMATIC
AUTOMATICPOTENTIAL
POTENTIALGUMS
GUMS&&INDUCTION
INDUCTION
PERIOD
PERIODTESTER
TESTER
LIQUID and DRY OXIDATION BATHS
9INDUCTION PERIOD and POTENTIAL RESIDUE
per ASTM D525, D873, D942, D5304 , ISO 7536, IP 40, IP 138, IP 142,
NFM 07013
This instrument is dedicated to the testing of
gasoline, aviation fuels, gas or grease stability in
oxidizing environments.
‹ The bath temperature must be set for 100 °C and
maintained between 98 °C and 102 °C. At test end, a
powerful software computes the induction period.
‹ The pressure probes located on top of the test
cylinders provide accurate measurements during the
test process and are sealed to prevent from leakage.
GEC-OX model NPI 442
(4 place metal bath in picture)
ƒ SAFE
ƒ ACCURATE
‹ The automatic detection is provided by a
sophisticated software associated to electronic high
resolution probes. This user friendly software allows to
operate each test place individually, to set
maintenance functions and to assess safety device
parameters dedicated to overheating prevention.
‹• Test results, time/pressure curve as well as
pressure derivative curve can be graphically or
numerically printed.
‹• Type of test to be carried for each pressure cylinder
must be specified. Each StSt pressure cylinder
assembly is delivered with a glassware set and an
adjusted burst disk to prevent overpressure .
ƒ COMPACT
ƒ VERSATILE
For information please contact:
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
http://www.gtinstruments.com
http://www.gtinstruments.com
Serving
ServingNorth
North&&South
SouthAmerica
America
ORDERING INFORMATION:
Cat #40900 • 2 Unit automatic instrument with liquid bath.
Cat #40925 • 4 Unit automatic instrument with metallic bath.
Cat #40903 • Testing pressure stainless steel cylinder with cover,
glassware and pressure rupture disk
OPTION
Cat #40930 • Oxygen filling and decompression valve adapter
Outside measurement (mm)
Weight (Kg)
(W) 560 x (D) 560 x (H) 550
60
Voltage and frequency 230 V - 50 HZ (115 V - 60 HZ on request)
FOAMING
FOAMINGCHARACTERISTICS
CHARACTERISTICSOF
OF
LUBRICATING
LUBRICATINGOILS
OILS––P643
P643
As per ASTM D892 and D6082
IP 146, ISO 6247
The models P643 features:
„ The instrument performs two tests at 24°C and two tests
at 93.5°C . Also can run Sequence 4 at 150 C .
„ The equipment comes complete with 2 heat resistant
glass jars.Each jar has its own control module including an
electronic temperature controller with digital display and
control knob, two factory calibrated flow meters, two
1000ml test cylinders, two certified diffuser stones,
immersion heater with over-temperature protection,
efficient stirring system with adjustable speed, air delivery
tubing and thermometer.
„ Cold bath with built-in coils for air and cooling water or
refrigerant circulations.
Dual twin tester, small foot
print for easy installation in a
standard fume hood
For information please contact:
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
http://www.gtinstruments.com
http://www.gtinstruments.com
Serving
ServingNorth
North&&South
SouthAmerica
America
ORDERING INFORMATION:
Cat # 9416431 Automatic time sequencer for monitoring
soaking, blowing and settling periods for
four samples.
Cat # 941640
Single Test bath for both 24 C and 93.5 C.
Delivered complete with certified stone ,
glassware, flow meters and thermometers
Cat # 941643
Twin Test baths for both 24 C and 93.5 C.
Delivered complete with certified stone ,
glassware, flow meters and thermometers
Cat # 9416432 Twin Test baths for sequence 1,2,3 at 24
and 93.5 C and sequence 4 at 150°C .
Delivered complete with two test cylinders
, calibrated flow meters and diffuser stones
and with same upper controller than model
941643.
Outside measurement (mm)
Weight (Kg)
643 (W) 680 x (D) 340 x (H) 770
Approx. 36
6431 (W) 380 x (D) 380 x (H) 780 Approx. 45
Voltage and frequency 230 V - 50 HZ
(115 V -60 HZ on request)
OXIDATION
OXIDATIONCHARACTERISTICS
CHARACTERISTICS(TOST)
(TOST)––P623
P623
As per ASTM D943, D2274, D2893
IP 157, DIN 5187
The model P623 features:
„ Exclusive turntable bringing each sample tube in front of
operator for easy checking without disturbance of the other
tubes and without being forced to remove it from the bath.
„ Air or oxygen supply to each cell is measured and
adjusted by easy readable set of eight accurate individual
flow meters.
„ Flow meter choice is flexible: from one to eight for air or
oxygen with every combination of both or, an optional
second easy exchangeable supporting panel with eight
flow meters of the other type. A set of eight large scales,
accurate flow meters are to order separately with
instrument. Please precise quantities and types.
„ Interior of the bath may be illuminated and the front
viewing window is covered with removable magnetic
metallic opaque panel for short runs in total darkness.
The instrument consists of an
8-position constant
temperature bath with an
electronic controller and
digital display.
Temperature range is between
50 and 130°C controlled to a
uniform ± 0.1°C by an
adjustable external stirring
mechanism .
For information please contact:
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
http://www.gtinstruments.com
http://www.gtinstruments.com
Serving
ServingNorth
North&&South
SouthAmerica
America
ORDERING INFORMATION:
Cat # P623
Basic unit without flow-meters
Flow-meters quantities and type
to be specified and ordered
separately.
ACCESSORIES:
6241
Complete set of 8 glassware assemblies
6242
Additional accessories including copper and
iron catalysts, winding mandrel and
thermometer bracket
6243
Kit ASTM D943 including 8 syringes, 8
needles and syringe supports
Outside measurement (mm)
Weight (Kg)
(W) 610 x (D) 450 x (H) 1100
Approx. 40
Voltage and frequency 230 V - 50 HZ
(115 V-60 HZ on request)
WATER
WATERSEPARABILITY
SEPARABILITYOF
OFPETROLEUM
PETROLEUMOILS
OILSAND
AND
SYNTHETIC
FLUIDS
SYNTHETIC FLUIDS
as per ASTM D1401 - ISO 6614
Model P545
n Reference 941545n Reference 941545eility.
• Three-test tube positions model.
• Electronic temperature controller between ambient and
95°C to 0,1°C with digital display and setting.
• Electronic stirring speed controller between 1200 and
1800rpm by 1 rpm step.
• Inside illumination.
• Easy movable stirring head with paddle for rapid and
correct positioning in each of the three sample tubes.
• 20-Way keyboard with interactive software and audible
alarm every 5 minutes to call operator for layers recording
as per standard.
• Auto-memorization of the various parameters recorded in
non volatile memory.
• Electrical safety : 300 mA circuit breaker.
Demulsibility
microprocessor
controlled tester with
highest reproducibility
• Overtemperature protection by separate thermostate
adjusted in factory and coupled to circuit breaker.
• Removable paddle for easy cleaning.
• Water bath capacity : 30 liters.
.
and repeatability.
ORDERING INFORMATION:
Cat # 941545 • Demulsibility bath
Outside measurement (mm) Weight (Kg)
(W) 530 x (D) 380 x (H) 900
43
Voltage and frequency
230 V, 50 / 60 Hz, 2200 W.
For information please contact:
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
http://www.gtinstruments.com
http://www.gtinstruments.com
Serving
ServingNorth
North&&South
SouthAmerica
America
AUTOMATIC
AUTOMATICFBT
FBTDETERMINATION
DETERMINATION--NBF
NBF210
210
As per ASTM D2068, IP387
Filter Blocking Tendency
of distillate fuel oils
ORDERING INFORMATION:
Portable Model
Cat # 41800
Bench Top Model
Cat # 41801
Measurement (mm)
Weight (Kg)
(W) 260 x (D) 535 x (H) 500
Approx.. 20
Voltage and frequency 230 V - 50 HZ
(115 V - 60 HZ on request)
For information please contact:
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
http://www.gtinstruments.com
http://www.gtinstruments.com
Serving
ServingNorth
North&&South
SouthAmerica
America
„ The NBF 210 automatically determines Filter
Blocking Tendency (FBT) of distillate fuel oils where
the end use demands an exceptional degree of
cleanliness.The NBF 210 automatically determines
FBT by integrating filtered flow and pressure during the
test. The pressure/flow curve is automatically printed at
the end of the test as well as the calculation method
and results.
„ The instrument consist of the following elements:
Š a pump system which maintains a constant
flow,
Š a pressure sensor set behind the filter,
Š two 400ml beakers,
Š an automatic follow up system of the filtered
volume during the test.
„ The temperature, pressure, time and eventually FBT
are displayed on a LCD screen.
„ Two models are available, portable or bench top.
Both delivered with an 80 column printer and ready for
use.
OXIDATION
OXIDATIONSTABILITY
STABILITYTEST
TEST––P650
P650
As per ASTM D2440
IP 48, IP 280, IP 306, IP 307, IP 335
DIN 51352
The model P650 features:
„ Electronic controller with Platinum 100 sensor and digital
temperature display between 50°C and 210°C to ± 0.1°C.
„ Flow meter choice is flexible: from one to twelve for air or
oxygen with every combination of both or, an optional
second easy exchangeable supporting panel with twelve
flow meters of the other type. A set of twelve large scale,
accurate flow meters are to be ordered separately. Please
precise quantities and types.
The P650 Oxidation Stability
Tester features an all
aluminum bath block that can
accommodate twelve sample
tubes and corresponding
flow meters
„ The block bath also includes a thirteenth recess for
occasional temperature check as per standards
requirements and aluminum alloy temperature measuring
block for thermometer.
„ A choice of glassware and catalyst metals are available
to complete the test equipment and are offered separately.
ORDERING INFORMATION:
Cat # P650
Basic equipment without flow
meters
Flow meters and accessories to
be ordered separately (refer to
quotation)
Outside measurement (mm) Weight (Kg)
(W) 650 x (D) 620 x (H) 850
Approx. 55
Voltage and frequency 230 V - 50 HZ
(115 V -60 HZ on request)
For information please contact:
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
http://www.gtinstruments.com
http://www.gtinstruments.com
Serving
ServingNorth
North&&South
SouthAmerica
America
EFFECT
EFFECTOF
OFHEAT
HEAT&&AIR
AIRON
ON
AAMOVING
MOVINGFILM
FILMOF
OFASPHALT
ASPHALT––model
model7572
7572
As per ASTM D2872
(Rolling thin film oven test-RTFOT)
The model 7572 features:
„ Double wall convection oven with 90 Liters capacity.
„ The door has a viewing window made of two sheets of
heat resistant glass separated by an air layer.
„ The oven is vented at the top and bottom. Bottom
symmetric vents have 15cm2 opening area and top vents
have 9.5cm2 Opening area.
„ This oven has an air plenum as described in ASTM
D2872 specification. It is also provided with squirrel type
fan for better heat uniformity.
Constructed strictly in
accordance with the ASTM
specifications
„ The control panel includes electronic temperature
regulator with digital display and can be set from 155 to
170°C ± 0.5°C and a factory calibrated flow meter for
adjusting airflow at 4000 mI/mm. ( 50-600 Nl / h )
„ The oven has a built in 305 mm diameter vertical
carousel to hold 8 glass sample containers rotating at 15 ±
0.2 rpm.
„ It is equipped with an air jet for blowing heated air into
each bottle at its lowest point of travel.
„ Outlet orifice has a 1 mm diameter and is connected to a
7.6 m length copper tubing to heat up air. The apparatus is
supplied with 8 glass containers and one thermometer
ASTM 13C.
„ The instrument has an over-heat protection.
Outside measurement (mm)
(W) 840 x (D) 620 x (H) 850
For information please contact:
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
http://www.gtinstruments.com
http://www.gtinstruments.com
Serving
ServingNorth
North&&South
SouthAmerica
America
Weight (Kg)
Approx. 70
SALT-IN-CRUDE
SALT-IN-CRUDEANALYZER
ANALYZER––NSB
NSB210
210
As per ASTM D3230
The model NSB 210 features:
„ Digital readout of both current and voltage for easy
checking.
„ Continuous adjustment of test voltage between 0 and
300 VAC.
„ Very easy to operate through a single selection switch
for calibration, standby and measurement.
The Salt-in-Crude Analyzer
fully complies with the ASTM
method and specifications for
construction and the 25000
ohms (±0.5%) non-inductive
resistor for calibration.
For information please contact:
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
http://www.gtinstruments.com
http://www.gtinstruments.com
Serving
ServingNorth
North&&South
SouthAmerica
America
ORDERING INFORMATION:
Cat # 942287 Salt-in-Crude analyzer with
electrodes
Outside measurement (mm) Weight (Kg)
(W) 300 x (D) 350 x (H) 150
Approx. 8
Voltage and frequency 230 V - 50 HZ
(115 V -60 HZ on request)
AIR
AIRRELEASE
RELEASEVALUE
VALUE––P688
P688
As per ASTM D3427, IP 313,
DIN1381
The model P688 features:
„ The test unit with one set of glass-ware,
„ A thermostated circulation bath for the jacketed test
vessel,
„ An oven (not illustrated) for pre-heating,
„ Necessary tubing, glass plunger with platinum wire for
density measurement.
The Air Release Tester is
designed to accommodate two
samples
The tester is equipped with an electronic temperature
controller and digital display and control knob, one
pressure gauge, one valve for heated air delivery, a plate
for installing the density balance (to be ordered separately),
two moving attachments for installing up to two glass
vessels (one for bubbling while the density is being
recorded in the other), the air preheating vessel is installed
behind the front panel, one thermometer ASTM 12C and
one stop watch.
ORDERING INFORMATION:
Cat # P688
Air release test rig
Cat # 213
Analytical balance, 110g (to 0.1mg)
capacity with special attachment for
plunger, RS232 interface
OPTIONS:
6881 Printer for density recording
6882 Dedicated PC software
Outside measurement (mm) Weight (Kg)
(W) 590 x (D) 340 x (H) 590
Approx. 105
Voltage and frequency 230 V - 50 HZ
(115 V -60 HZ on request)
For information please contact:
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
http://www.gtinstruments.com
http://www.gtinstruments.com
Serving
ServingNorth
North&&South
SouthAmerica
America
AUTOMATIC
AUTOMATICMICRO
MICROCONRADSON
CONRADSON
CARBON
CARBONRESIDUE
RESIDUEDETERMINATION
DETERMINATION––MICRO
MICROCONRADSON
CONRADSON
as per ASTM D4530
„ This test method covers the determination of the amount
of carbon residue formed after evaporation and pyrolysis of
petroleum materials under certain conditions and is
intended to provide some indication of the relative coke
forming tendency of such materials.
New micro carbon residue tester - model NMC 210
includes following features :
„Ambient temperature use : 15 to 30°C
„Ambient relative humidity : max. 85% (non condensing)
„Furnace temperature range : from ambient to 550°C
„Temperature measurement resolution : 1°C
„Furnace cooling : by compressed air injection
NMC 210 Model
„Maximum load of samples : 12 small vials
„The double insulated oven is ventilated with an inert gas
or air and can perform the micro conradson test at 500°C
„ A pressure gauge located on instrument front panel
displays the gas delivery pressure to oven and a flowmeter
indicates the amount of gas entering the oven area..
ORDERING INFORMATION:
NMC 210 • Micro conradson tester.
Cat Nb 941670
Outside measurement (mm)
Weight (Kg)
(W)250x(D)300x(H)600
± 15
Voltage and frequency 230 V - 50 HZ
(115 V- 60HZ on request)
For information please contact:
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
http://www.gtinstruments.com
http://www.gtinstruments.com
Serving
ServingNorth
North&&South
SouthAmerica
America
AUTOMATIC
AUTOMATICASH
ASHTESTER
TESTER
MICRO
MICROCARBON
CARBONRESIDUE
RESIDUE ––MICRO
MICROCONRADSON
CONRADSON
Custom built Ash methods and also
as per ASTM D4530, D482, D189
EN 7, 13, IP 398, ISO 10370, 6615, 6245,
„ The NMC 440 provides 2 preset methods and also 18
additional research ones with 4 heating segments each.
„ The double insulated oven is ventilated with an inert gas
or air and can perform the micro conradson test at 500°C
or the ash test at 775°C.
„ A pressure gauge located on instrument front panel
displays the gas delivery pressure to oven and a flowmeter
indicates the amount of gas entering the oven area.
Solenoid valves can be either manually or automatically
activated.
NMC 440 Model
„ Initial and final weights are entered by using the keypad
so that carbon residue percentage of each sample can be
computed and included on test reports.
„ A detailed test report including weights, results and
temperature curve during the test can be printed when the
NMC 440 is connected to the optional thermal printer. The
instrument can also be connected to a PC which not only
keeps track of previous test results but also displays during
tests the temperature curve. A zoom on the critical part of it
can be easily performed.
„ The instrument is equipped with preset and
programmable cuts-off for safety. The heating element is
especially protected against overheating.
For information please contact:
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
http://www.gtinstruments.com
http://www.gtinstruments.com
Serving
ServingNorth
North&&South
SouthAmerica
America
ORDERING INFORMATION:
NMC 440 • Micro carbon residue & ash tester.
OPTION
• Vials and crucibles for samples
• Printer
• Gas connection kit
Outside measurement (mm)
Weight (Kg)
(W)285x(D)510x(H)450
± 18
Voltage and frequency 230 V - 50 HZ
(115 V- 60HZ on request)
COLD BEHAVIOR
FULLY AUTOMATED COLD FILTER PLUGGING POINT
- Model NTL 450 Standards : ASTM D 6371 – IP 309 – ISO EN 116 –
Applications : Diesels and heating fuels
Scope : This test method covers the determination of the cold
filter plugging point (CFPP) of diesel and domestic heating fuels
using automated equipment.
The results express an estimation of the lowest temperature at
which a fuel will freely flow within a fuel system
MAIN FEATURES
Reference 60200
9Detection by special optical cells
9Real time Display of the method cooling
steps and curves
9Possibility to use a programmed linear
cooling slope
9Quick and easy set up on testing head
9Stand alone or networking configuration
9Display of sucking up time & release
time of the sample
9Easy access to maintenance paramaters
by software
9Easy access to hardware maintenance
9Electronic vacuum regulation with 15 l/h
TOUCHSCREEN interface
Storage : 200 results in stand alone or
network multiple units through ETHERNET
connexion (unlimited storage !!)
WINDOWS Platform
GT instruments
.
P.O BOX 846 KEMAH TX 77565-0846 USA
TEL. 1 281 334 5015 FAX 1 281 538 3622
Email : [email protected]
- EXTERNAL COOLING CRYOSTAT
REQUIRED CONTACT US
www.gtinstruments.com
ASPHALTENES
ASPHALTENESDETERMINATION
DETERMINATIONin
inCRUDE
CRUDEand
and
PETROLEUM
PETROLEUMPRODUCTS
PRODUCTS
As per ASTM D6560, IP143
The ASPHAN 02 features:
The semi automatic ASPHAN 02 apparatus offers several
benefits to the chemist and operator :
a compact design easy to operate , it can be install in a
fume hood.
an increase in repeatability and reproducibility ,
an increase in the yields of the standard method ,
a decrease in solvent consumption as solvents can be
recovered ,
an increase in safety level as the filtration step of the
method is automatic without operator intervention or
contact with solvents .
The titration of asphaltenes content of petroleum products in
accordance with ASTM D6560 is generally determined by
precipitation with n-heptane.Determinations below 0.5% are
very difficult or impossible and repeatability or reproducibilty
for concentration above 0.5% are very poor.
The ASPHAN 02 designed by ELF Research comply and
exceed the characteristics of the methods D6560 , IP143 in
respect to :
-Repeatability around 5% concentration is less than 2% Wt
of the result.
„Test performed with fewer operator
interventions
„ Apparatus completely sealed ( no
toxic exhaust )
„ Low concentration determinations
„ Test performed quickly and
accurately
- Low range of determination level down to 0.2 / 0.3 % Wt
For information please contact:
GECIL
GECILProcess
Process
14
14Rte
RteST
STRomain
Romain-69450
-69450ST
STCyr
Cyrau
auMont
Montd’or
d’orFRANCE
FRANCE
Phone:
+33
(0)4
72532393
Fax:
+33(0)4
78472803
Phone: +33 (0)4 72532393 Fax: +33(0)4 78472803
Email
Email::[email protected]
[email protected]
GT
GTInstruments
Instruments
P.O.
P.O.Box
Box846
846--Kemah,
Kemah,TX
TX77565-0846
77565-0846
Phone:
(281)
334
5015
Phone: (281) 334 - 5015 Fax:
Fax:(281)
(281)538
538––3622
3622
Email
:
[email protected]
Email : [email protected]
Serving
ServingNorth
North&&South
SouthAmerica
America
http://www.gecil.com
http://www.gecil.com or
orwww.gtinstruments.com
www.gtinstruments.com
ORDERING INFORMATION:
Cat # 3ASPH02
Asphan 02 asphaltenes
extractor complete
GECIL Process
GT instruments
14 route de Saint Romain
69450 Saint Cyr au mont d’or
France
P.O Box 846
Kemah, TX 77565-0846
USA
Phone: +33 (0)4 72532393
Fax: +33 (0)4 78472803
Email: [email protected]
Phone : 1 281 334 5015
Fax : 1 2815383622
Email: [email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement