ABUS BW8060 Wall/Ceiling Mount Technical data

Wall/Ceiling Mount

Art. no. BW8060

Page 1 of 1

• Flexible installation options for walls, ceilings and corners

• For ABUS motion detectors BW8000, BW8010, BW8020

The wall/ceiling mount set is an accessory for motion detectors. It ensures safe installation. Installed at a height of 2.5 m, the motion detectors cover an area of up to 15 m x 15 m. The wall and ceiling mounting set gives you installation flexibility. Whether fitted to wall, ceiling, or in a corner: This set can be fitted easily anywhere. The maximum angle setting is ±45° horizontally and +6°-17.5° vertically. The wall/ceiling mounting set is suitable for the following motion detectors: motion detector ECO, motion detector PROFI VdS, motion detector DUPLEX VdS, motion detector DUPLEX MW VdS, and motion detector TRIPLEX MW VdS.

Technical Data:

Width

Height

120 mm

60 mm

Length

Installation location

230 mm

Wall, ceiling, corner installation

Powered by TCPDF (www.tcpdf.org)

Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 01/2022