Advertisement
Advertisement
Wired NC Opening Detector (white)
Art. no. FU7350W
Page 1 of 1
• For reliable protection of windows and doors (perimeter protection)
• Magnetic contact suitable for wall mounting and flush mounting
• Opening detector consisting of magnetic contact and magnet
• Incl. 2 m cable (2-wire), mounting enclosure, shims and fixing screws
• NC switching contact
The opening detector is a magnetic contact for protecting doors and windows. Unauthorised opening is detected and reported to the alarm center. The opening detector consists of a magnetic contact (reed) and a magnet.
These are fitted parallel, in front of, or at right angles to each other at a maximum distance of 13 mm apart. The electric circuit of this NC opening detector is normally closed (NC). If the distance between the reed and the magnet increases, the circuit is broken and an alarm reported. The optimum installation location is the middle of the door or window frame. It can also be fitted to the bottom of the window frame if a particular window with a magnetic contact is to be tilted open. The detector is suitable for both flush and surface-mounted installation.
The opening detector is available in white and brown.
Technical Data:
VdS class
Dimensions
Connections
Width
Type of detection
Stray-field protection
Housing material none
(WxHxD) 11x12x48 mm
NC, max. contact capacity
100 V/5 W/0.05 A
11 mm
Magnetic field measurement
No
ABS
Height
Cable type
Cable length
Length
Installation location
Sensor type
12 mm
2-core
2 m
48 mm
Integration / surface mounting
Read contact
Powered by TCPDF (www.tcpdf.org)
Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 01/2022

Public link updated
The public link to your chat has been updated.
Advertisement