Advertisement
Advertisement
Opening Detector, 5m, 2-core (white)
Art. no. MK2000W
Page 1 of 1
• For reliable perimeter protection
• For protecting doors and windows
The opening detector is a magnetic contact for protecting doors and windows. Unauthorised opening is detected and reported to the alarm panel. The opening detector consists of a magnetic contact (reed) and a magnet. These are fitted parallel, in front of, or at right angles to each other at a minimum distance of 13 mm apart. The electric circuit of this NO opening detector is normally open (NO). If the distance between reed and magnet increases by ca. 2 cm, the circuit is closed and an alarm reported. The optimum installation location is the middle of the door or window frame. It can also be fitted to the bottom of the window frame if a particular window with a magnetic contact is to be tilted open. The detector is suitable for both flush and surface-mounted installation.
The opening detector is available in white and brown.
Technical Data:
VdS class
Dimensions
Connections
Width
Type of detection
Stray-field protection
Housing material none
(WxHxD) 11x12x48 mm
NO, max. contact capacity
100 V / 5 W / 0.05 A
11 mm
Magnetic field measurement
No
ABS
Height
Cable type
Cable length
Length
Installation location
Sensor type
12 mm
2-core
5 m
48 mm
Integration / surface mounting
Reed contact
Powered by TCPDF (www.tcpdf.org)
Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 01/2022

Public link updated
The public link to your chat has been updated.
Advertisement