INOXPA PROLAC HP Centrifugal Pump Installation, Service and Maintenance Instructions

The PROLAC HP is a robust close-coupled centrifugal pump designed for high-pressure operations up to 40 bar. It features a shrouded motor, axial suction, radial delivery, and hygienic-type connections. The impeller is available in open or half-open designs depending on the model, and is manufactured in a single piece. The balanced mechanical seal, specially designed for high-pressure applications, ensures complete hygiene. The PROLAC HP pump is ideal for use in demanding applications like filtering and reverse osmosis processes in the food and pharmaceutical industries.

PDF Download
Document
INOXPA PROLAC HP Centrifugal Pump Installation and Maintenance Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • High-pressure operation (up to 40 bar)
  • Robust close-coupled design
  • Shrouded motor
  • Axial suction, radial delivery
  • Hygienic-type connections
  • Open or half-open impeller design
  • Balanced mechanical seal
  • AISI 316L stainless steel construction
  • Ra 0.8 internal finish
  • CIP (Clean-in-Place) compatible

Frequently asked questions

The PROLAC HP pump can handle a maximum operating pressure of 40 bar (580 PSI).

The parts in contact with the product are made of AISI 316L stainless steel. Other parts are made of AISI 304 stainless steel. The standard gasket material is EPDM.

The PROLAC HP pump can handle temperatures from -10°C to +120°C (14°F to 248°F) with EPDM gaskets. For higher temperatures, consult your supplier about alternative gasket materials like PTFE.

The PROLAC HP pump can be cleaned using a CIP (Clean-in-Place) process or by disassembling the pump and cleaning individual parts.

The PROLAC HP pump uses a balanced single mechanical seal with graphite stationary parts, SiC rotary parts, and EPDM seals.
Preparing document for printing…
0%