OFFICE OF THE DEAN GANDHI MEDICAL COLLEGE BHOPAL

OFFICE OF THE DEAN GANDHI MEDICAL COLLEGE BHOPAL
OFFICE OF THE DEAN
GANDHI MEDICAL COLLEGE BHOPAL
No--------------/M.C./10/2012
Date ---------
To,
The Director of Public Relations.
Jansampark Bhawan,
Banganga Road,
Bhopal.
I am sending herewith 8 copies of Tenders Notice for publication. It may Please be
got published once at least in five all India English Language News papers and three local
News papers. The news paper publishers may be asked to send a copy of the published
advertisement directly to the undersigned.
Encl. :- 8
DEAN
GANDHI MEDICAL COLLEGE BHOPAL
Copy to :1/
The Director General of commercial Intelligence and statistics, kolkatta. A copy
of the tender notice is enclosed herewith which may please be got published in
your trade Journal. A copy of the published advertisement may also be sent to this
office.
2/
The Director of Medical Education, M.P. Bhopal.
DEAN
GANDHI MEDICAL COLLEGE BHOPAL
OFFICE OF THE DEAN
GANDHI MEDICAL COLLEGE BHOPAL
No--------------/M.C./10/2011
Date --------TENDER NOTICE
Sealed tenders are invited up to 1.00 P.M. of 30/3/2012 for the supply instrument
/Equipment . The Tenders will be opened on 30/3/2012 at 3.00 P.M. In the presence of
Intending tenders. A complete set of bidding documents may be purchased from Dean,
Gandhi Medical College, Bhopal.
1/
Tender forms and specifications along with terms and conditions can
be obtained from the office of the undersigned up to 29/3/2012 by giving an
application to the Dean, Gandhi Medical College, Bhopal before 4.00 P.M.
p.m.On any working day dudring office hours after depositing Rs. 1000/- (Rs. One
Thousands only) in the form of Cash / D.D. in favour of Dean Gandhi Medical
College, Bhopal which is not refundable.
Note: Tender can be downloaded from the website www,gmcbhopal.net. The bid form
shall be enclosed with a DD of Rs. 1000/- (Rs. One Thousands Only) in the name
of Dean Gandhi Medical College, Bhopal failing which the tender will be
rejected.
DEAN
GANDHI MEDICAL COLLEGE
BHOPAL
TENDERDOCUMENT
TENDER NO.
:
GMC/Equipment/11-12/---------------
FOR SUPPLY OF EQUIPMENT
:
(MACHINERY, INSTRUMENTS
& OTHER ITEMS)
CONTRACT DOCUMENT CONSISTING OF TENDER NOTICE. TENDER
FORM, RATE SHEET, TENDER CONDITIONS, SPECIFICATIONS AND
TECHNICAL PARTICULARS., FORM OF AGREEMENT ETC.
DEAN
GANDHI MEDICAL COLLEGE
BHOPAL
NATIONAL COMPETITIVE BIDDING FOR THE SUPPLY OF EQUIPMENTS
(MACHINERY, INSTRUMENTS & OTHER ITEMS)
BID DOCUMENT PURCHASE START DATE
: 03/03/2012
LAST DATE AND TIME FOR
SUBMISSION OF BIDS. 30/03/2012
Time up to 1.00 P.M.
: DATE AND TIME OF OPENING OF BIDS
30/03/2012
Time at 3.00 P.M.
-
PLACE OF OPENING OF BIDS
: CONFERENCE HALL
DEAN, GANDHI MEDICAL COLLEGE
BHOPAL
ADDRESS FOR CORRESPONDENCE
: DEAN, GANDHI MEDICAL COLLEGE,
SULTANIA ROAD, BHOPAL (M.P.)
PIN-462001
OFFICE OF THE DEAN
GANDHI MEDICAL COLLEGE BHOPAL
No--------------/M.C./10/2011
Date --------TENDER NOTICE
Sealed tenders are invited up to 1.00 P.M. of 30/3/2012 for the supply instrument /Equipment . The Tenders
will be opened on 30/3/2012 at 3.00 P.M. In the presence of Intending tenders. A complete set of bidding documents
may be purchased from Dean, Gandhi Medical College, Bhopal.
1/
Tender forms and specifications along with terms and conditions can
be obtained from the office of the undersigned up to 29/3/2012 by giving an application to the Dean, Gandhi
Medical College, Bhopal before 4.00 P.M.
p.m.On any working day dudring office hours after depositing
Rs. 1000/- (Rs. One Thousands only) in the form of Cash / D.D. in favour of Dean Gandhi Medical College,
Bhopal which is not refundable.
Note: Tender can be downloaded from the website www,gmcbhopal.net. The bid form shall be enclosed with a
DD of Rs. 1000/- (Rs. One Thousands Only) in the name of Dean Gandhi Medical College, Bhopal
failing which the tender will be rejected.
DEAN
GANDHI MEDICAL COLLEGE
BHOPAL
TERMS AND CONDITIONS
1.
The Dean Gandhi Medical College Bhopal M.P. require Equipments ( Machinery Instruments and other
items) for various Departments of Gandhi Medical College, Bhopal & associated Hospitals Bid is issued
for procurement of equipment (list of equipments enclosed) at competitive rates. After finalization of
the bid the contract will be awarded to successful bidders for supply of the items, during one year or till
further order on rate contract basis on approved rates The Machines / Equipments have to be Supplied
and installed to the various department of Gandhi Medical College Bhopal & associated Hospitals.
2.
The invitation for Bids is open to all eligible bidders.
3.
The Bid prepare by the bidder, as well as all correspondence and documents printed literature and leaflets
relating to the bid exchanged by the Bidder and the the purchaser shall be written and in English/Hindi
language.
4.
Prices (inclusive of excise duty/ custom duty transportation packing, insurance, installation, training,
loading.- Unloading warranty service charge , inspection and any incidental charges, but exclusive of
CST/VAT) should be quoted for each of the required equipments/ machine separately on door delivery basis
according to the unit ordered. Tender for the supply of equipments etc. with cross condition like “AT
CURENT MARKET RATES “ shall not be accepted. Handling, clearing, transport charges etc. shall not be
paid. The delivery should be made as stipulated in the supply order placed with successful bidders
conditional tenders will not be accepted.
5.
6.
Prices shall be quoted in Indian Rupees.
The bidder shall submit the specification's compliance / deviation report duly filled and signed which
clearly bring out the deviation from the specification if any 'given in Annexure-VI.
7.
Documents, if any, to show that the manufacturing unit/importer has been recog11ized, by WHO,
UNICEF, ISO/ or any other Certificate The bidder should also submit national and international
quality certificates like ISI/CE/C" mark/IEC standard or equivalent certificate of quoted product, if
available.
8.
The bidder shall furnish a notarized affidavit in the format given in Annexure-III declaring that the bidder
accepts all terms and conditions of the tender.
9.
In case of imported equipment IEC certificate of importer / bidder shall be submitted.
10.
Concern / Company have not been debarred / blacklisted either by The purchaser or by any State
Government or Central Government Organization for the quoted product or as a whole. Affidavit to this
effect shall be submitted by the concern / company.
11.
The Bidder shall furnish, as part of its bid, the bid security which shall be equal to 3% of the total aggregate
value of Item's of Equipments tendered for, subject to a maximum of Rs 1.00 Lacs. ( Rs ONE Lacs Only)
No concession / exemption shall be allowed F.D.R. should be attached. The aggregate values of items
tendered for and 3% amount of it should be shown separately in Envelop "A.
12.
The bid security shall be in Indian Rupees and shall be in form of Fixed Deposit for 18 months in favour
of Dean, Gandhi. Medical College, Bhopal:,
13.
Bid should be submitted in following system and should furnish the following documents failing which
their bid shall not be accepted:Envelops - D: Main Tender Envelop
(E.M.D. in the form of F.D.R./DD only)
Fixed Deposit for 18 Months 3% of total aggregate value of item or equipments tendered for as E.M.D.
(issued by Nationalized bank in the name of Dean, Gandhi Medical College Bhopal. (Refundable).
(Any other instrument for example like Cheque will not be accepted).
A statement of Aggregate value of total items tendered for and value of 3% (E.M.D. maximum of Rs. one
Lack.)
· Without submission of E.M.D. the. tender will be summarily rejected as per rules.
Tender document fee if uploaded from website Rs 1000.)
· In no case the tender cost fee should be mixed with E.M.D. amount. Fee cost is not
refundable.
Essential Documents as mentioned below.
13.1
13.2
13.3
The bidders have to submit name of the items, its code no. for which they are quoting in the price bid. Such
names and items code of the items should be submitted along with the technical bid falling which the
tendere4' price bid will not be opened. The bidder has to submit name of item and the code number in the
format given below.
Sr. No.
Item Code
Name of Equipment
13.4 Bidders should have the registration under Commercial Tax Authority should be attached.
13.5 Sales Tax VAT Clearance certificate, as on 31.03.2011 (as per form attached in Annexure-I).
(Note: Sales Clearance from sales tax department up to 31.03.2011 must be attached with this annexure)
13.6 Annexure-II (Manufacture Authorization Form)
13.7 Annexure-III (Undertaking Form / Declaration Form)
13.8 Annexure-V (Annual Turnover Statement)
13.9 The bidder should also submit national & international quality certificates like ISI/CE/C ISO-9002, IP/BP
etc" mark / lEC standard or equivalent certificate of quoted product, if available.
13.10 Concern / Company have not been debarred / blacklisted either by the purchaser or by any State Government
or Central Government Organization. this effect shall be submitted by the concern / company. Affidavit that
the firm has no vigilance case / CBI case pending against him / s. Affidavit that the firm has not supplied the
same item at the lower rate than quo-~" tender to any Govt. / Semi Govt. or any other organization.
13.11 Original Bid Form duly signed by authorized signatory as per Section V, duly sealed and
signed by the bidder on each page for acceptance of Terms and Conditions.Please submit Only Annexure V (as whole
tender documents from page No. 1 to 23)as acceptance of all terms and conditions of tender from page No. 1 to 23,
(This Section V page will be considered as acceptance of all tender terms and condition from the bidder)
(Save Paper Save Environment).
13.12
13.13
13.14
13.15
Statement of good financial standing from bankers.
In case of imported equipment IEC certificate of importer / bidder shall be submitted.
Any other document if required.
Technical/Financial bid documents must not be submitted with this envelope.
Envelop - B: (Technical Bid).
(i)
Technical bid for the quoted equipments etc. should be signed and stamped on each page.
The bidder shall submit the specification's compliance / deviation report duly filled and signed which clearly
bring out the deviation from the specification if any given in Annexure-VI.
(ii)
A list of user of quoted equipments by the Principal Manufacturer for last three years. These
list should also contain the supplies related to the Govt. hospital/Medical Colleges / Public
Sector undertaking / Undertaking hospital and other institutions of repute. Bidder should
submit details of installation in Annexure IV
(iii) Literature of original catalogue of the product attached for reference in two copies.
(iv) Quality certificates such as CE/ US FDA product wise compulsory
Envelop - C: (Financial Bid).
i.
Financial bid for the quoted equipments etc. should be signed and stamped on each page (ANNEXURE-X)
ii.
CMC charges as per Annexure Xl.
iii.
Bidder should show recurring expenditure of each equipment separately.
All the three envelops sealed in main envelop i.e. marked ENVELOP-D"TENDERFOR
EQUIPMENTSETC."All the envelopes A, B. C. must be Wax sealed using sealing Wax and official seal,
sealed cello taped, moisture free and strong.
All the enclosures and photocopies should be self certified and stamped. i.
Reference No. of the tender
ii.
Tender regarding
iii.
Due date of submission of tender form
iv.
Due date for opening of the tender
v.
Name of the firm
14
PRICE BIDThe Bidder should furnish the following:
i)
The rate quoted per unit (landed price) in Annexure-X (Suggested sample proforma of price
schedule) shall be inclusive of Excise Duty / Custom Duty, freight, packing, insurance, inspection &
testing charges etc. exclusive of VAT and should be F.O.R. destination.
ii)
The bidder/parent company / comprehensive Maintenance Contract (include free labour, repair,
other services & spare parts) for the next seven years after the expiry of three years warranty period
in Annexure - XI.
(iii) The bidder should quote equipments which will have guarantee / warranty of atleast 3 years,
equipments which have less than 3 years warranty will not be entertainment and so should not be
quoted.
iv)
15
Bidder should show recurring expenditure of each equipment separately.
Bids will not be accepted after the time and date specified in the invitation for Bids (Section I).
16
Bid will be opened on the day, date & place specified by the The purchaser.
17
All bidders are entitled to be present at the date and time & place for opening of
18
Bids will be opened in the presence of Bidder's representatives who choose to attend on the
Bids.
specified date and time fixed for opening the bid. Envelop D containing envelop A, B and C,
E nvelop " A", will be immediately opened. Documents together with contents of envelop A will
be subject to scrutiny, those bidders whose documents and contents are as per tender conditions
will only be deemed qualified for opening of technical bid. The date and time of opening of
technical bid (envelop B) will be made available on website at the earliest of opening of bid and
will be communicated simultaneously to those who qualify for opening of bid. Technical and
Price bid will be submitted separately. Technical Bid will be evaluated as per specification and
NCB terms and conditions by the Technical Committee. Those bidders who qualify for the
technical bid will be invited for· demonstration of equipment on the day, date & place specified
by the purchaser. The bidders will have to demonstrate the equipments on the date, day and place
specified, failing which their bid will be rejected. Thereafter, Price Bid (envelop C) will be opened
only for those bidders whose bid will be found technically responsive after demonstration.
Opening of date of price bid will be communicated separately only to those who qualify and will
be displayed on the specified website.
19
During evaluation of bids, the The purchaser may, at its discretion, ask the Bidder for clarification
of its Bid. Any clarification submitted by a bidder in respect to its bid and that is not in response to
a request by the The purchaser shall not be considered. The request for clarification and the
response shall be in writing and no change in prices or substance of the bid shall be sought, offered
or permitted except to confirm the correction of arithmetic errors discovered by the The purchaser
in the evaluation of the bids.
20
Purchase will also be made from SC / ST firms as per State Government rules.
21.
The purchaser's Right to Accept any Bid and to Reject any or all bids
The purchaser reserves the right to accept or reject the tender for the supply of all items of
equipments or for anyone or more of the items of equipments tendered for in a tender without
assigning any reason, without thereby incurring any liability to the affected Bidder or Bidders or
any obligation to inform the affected Bidder or Bidders of the grounds for the. The purchaser's
action.
22
While quoting the rates of MACHINERY, INSTRUMENTS & OTHER ITEMS etc. as enclosed
list, the name of the manufacturer, must be mentioned otherwise the tender is liable to be rejected.
23
Software and Hardware Upgradation - Free Digital Up-gradation of software (all update &
upgrades) up to 5 years.
24
Voltage stabilizer or UPS & digital technology should be supplied with the equipments required it.
25
Circuit diagram with operator's and service manual must be enclosed along with the equipment.
26
Names of the institution in India, where quoted equipment / work has been supplied / installed and
working satisfactory done during last three years can/should be attached.
TRAINING:
27
28
29
Training of equipments within the stipulated time should be done by the supplier at his cost. The
time & place of training shall be stipulated by purchaser. Training should be of 2 doctors and 2
technicians of user department.
Local agents quoting on behalf of their foreign suppliers must attach authority letter in their favour.
Successful tenderers will have to furnish performance Bank Guarantee for 10% contract value from
any Nationalized Bank valid for the warranty period.SUBJECT TO MAXIMUM OF 2 LAKCS PER
DERARTMENT
30 PAYMENT
30.1 The payment of the claim / bill will be made after deduction of VAT as per rules of M.P. Commercial
Tax Act Section 34 and other taxes from the bill.
30.2
30.4
Supply of equipments means - installation and commissioning and also test running at site. No
separate charges will be paid separately on this account.
Payment will be made after installation, commissioning and successful test running at the site, due
verification and subsequent satisfactory report of the user department.
Recurring expenditure of the machine / equipment should be mentioned.
31.
Termination for insolvency
30.3
The The purchaser may at any time terminate the contract by giving written notice to the Supplier,
if the, Supplier becomes bankrupt or otherwise insolvent. In this event, termination will be without
compensation to the Supplier, provided that such termination will not prejudice or affect any right
of action or remedy which has accrued or will accrue thereafter to the The purchaser.
32.
Jurisdiction
32.1 In respect of all disputes or claims related with Rate Contracts out of or under this
contract, Bhopal
Court alone shall have jurisdiction to entertain the same.
32.2 In respect of all disputes or claims related with Supply, Payments and any other out of or under this
contract, the concerned Court of Purchaser's place shall have jurisdiction to entertain the same.
33.
The inspections shall be carried out by the appointed Technical Committee or Inspection Agency at
the premises of the suppliers / go down or stores of the supplier / at point of delivery / installation.
Inspection and testing charges for the above purpose shall be borne by the supplier.
34.
Comprehensive Maintenance Contract (include free labour, repair, other services & spare
parts) & Training
34.1 Comprehensive (include free labour, repair, other services & spare parts) Maintenance Contract for
the next seven years after the expiry of three years warranty period in Annexure-XII.
34.2
The bidder shall provide operational training to Technician staff / operator for minimum of 3 days
by the expert or as instructed at the time of agreement.
34.3
The bidder should take guarantee of the availability of all spare parts for a minimum period of 10
years from the date of installation.
34.4
Genuine equipments and instruments etc. should be supplied. Tenderers should indicate the source
of supply i.e. name and address of the manufacturers from whom the items are to be imported.
35. PAYMENT
35.1 No advance payments towards cost of equipments etc. will be made to the supplier.
35.2 Payment will be made after completion of supply of goods / service as per supply order,
installation, commissioning and successful test running at the site, due verification and subsequent
satisfactory report of the user department. Payments shall be made by the Purchaser after
submission of the claim by the Supplier. All sincere efforts will be made for payment of due
amount which has been submitted to the purchaser within 30 days unless the situation being out of
control of / unforeseen for the purchaser. Proforma invoice should also be submitted
DEAN
GANDHI MEDICAL COLLEGE
BHOPAL
BIDFORM
SECTION V
Ref. Clause No.
To,
This Bid Form is to be submitted against acceptance o
all terms and conditions of tender from page No. 1 to
(Save Paper Save Environment)
The Dean,
Gandhi . Medical College
Bhopal, (M.P.)
i.
ii..
iii.
iv.
v.
vi.
vii.
viii.
ix.
x.
xi.
xii.
xiii.
I/We, the undersigned, declare that:
I/We have examined the bidding documents the receipt which is hereby acknowledged.
I/We have gone through all terms and conditions of the tender document before submitting the same. I/We hereby
agree to all terms and conditions as stipulated in the tender document and offer to supply and deliver ........ _.. . . . ... . .
. ... (Brief description of equipments) in conformity with the bidding documents in accordance with the schedule of
prices attached herewith and made part of this bid.
I/We undertake, if our bid is accepted, to deliver the goods in accordance with delivery period specified in the supply
order.
I/We agree to abide by this bid for a period of 180 (One Hundred Eighty) days after the date fixed for bid opening and
shall remain binding upon us and may be accepted at any time before the expiration of that date.
If our bid is accepted, we commit to obtain a performance security in accordance with GCC clause 7 & SCC clause 2
for the due performance of the contract.
Until a formal contract is prepared and executed, this bid together with your written acceptance thereof and your
notification of rate contract shall constitute a binding contract between us.
I/We undertake if at any time, it is found that any information furnished by us to the The purchaser, either in our bid or
otherwise, is false, the The purchaser servers the right to terminate the contract without assigning any reasons,
forfeiting the bid security or performance security and blacklisting us for a period of 5 years.
I/We understand that you are not bound to accept the lowest or any bid you may receive.
I/We hereby submit our tender for the
I/We now enclosing herewith the E.M.D. No.
dated
I/We have noted that overwritten entries shall be deleted unless duly cut & re-written and initialed.
Tenders are duly signed (No thumb impression should be affixed).
I/We undertake to sign the contract / agreement, if required, within 15 (fifteen) days from the date of issue of the
letter of acceptance, failing which our/my security money deposited may be forfeited and our/my name may be
removed from the list of suppliers.
Dated this ....................... day of .................... 2011.
(Signature) .................
(in the capacity
of:............................)
Duly authorized to sign for and on behalf of....................
Witness
Witness
ANNEXURE-I
Ref. Clause No.
FORM OF CERTIFICATE OF SALES TAX / V A T VERIFICATION TO BE PRODUCE}) BY
AN APPLICANT FROM THE CONTRACT OR OTHER PATRONAGE AT THE DISPOSAL OF
THE GOVERNMENT OF MADHYA PRADESH
(Tobefilledupbytheapplicant)
01.
02.
03.
04.
.
Name of style in which the applicant is addressed or assessable to sales tax / VAT addresses or
assessment
a.
Name and address of all companies, firms or associations or persons in which the applicant
is
interested in his individual or fiduciary capacity
b.
Places of business of the applicant (all places of business should be mentioned)
The Districts, blocks and division in which the applicant is assessed to sales tax / VAT (all places of
business should be furnished)
a.
Total contract amount or value of patronage received in the preceding three years
2008-09
2009-10
2010-2011
b.
Particular of sales - Tax / VAT for the preceding three years
Year
Reasons for
Total Turnover Total Tax
Total tax
Balance
Assessed
Balance (Rs.)
be assessed
paid (Rs.)
due (Rs.)
(Rs.)
(Rs.)
2008-09
2009-10
2010-2011
c.
If there has been no assessment in any year, whether any returns were submitted? if yes, the
division in which the returns were sent?
d.
Whether any penal action or proceeding for the recovery of Sales tax / VAT is pending?
e.
The name and address of Branches, if any:
f.
sales tax clearance up to 31.03.2011issued by Sales Tax Department must be compalsory
attached with this annexure.
I declare that that the above information is correct and complete to the best of my knowledge and
belief
Signature of Applicant: Address:
Date:
ANNEXURE - II
Ref. Clause No.
MANUFACTURER'SAUTHORIZATIONLETTER
No...................................... Dated. ..................
To,
Dear Sir,
Tender No.:
We
factories at
an established and reputable Manufacturers of having
_ and
required quantity to M/s
do hereby agree to supply confirming to the required specification and
(Bidder) as offered by them to supply against the above stated Tender.
We hereby extend our full guarantee and warranty as per Clause 15 of the General Conditions of
Contract for the supply against this invitation for Bid by the above firm.
Yours faithfully,
(name) for and on behalf of M./s
(Name of manufacturers)
Note: This letter should be signed by a person competent and having authority to sign on behalf of
manufacturer, and should be duly Notarized.
ANNEXURE - III
Ref. Clause No.
DECLARATION/UNDERTAKlNG
I/We/ M/s.
represented by its Proprietor / Managing Partner / Managing Director
having its Registered Office at
and its Factory Premises at
do declare that I/We have
carefully read all the conditions of tender in Ref. No. for supply of equipment, floated by the Purchase
Committee, and accept all conditions of Tender.
I/We agree that the Purchaser has rights of forfeiting the Bid Security and or Performance Security
Deposit and blacklisting me/us for a period of 7 years if any information furnished by us proved to be false
at the time of inspection and not complying to the tender conditions.
Signature of the Bidder
Name & Address in capital letters with Designation
TobeAttestedbyNotary.
Annexure-V
Ref. Clause No.
ANNUAL TURNOVER STATEMENT
The annual Turnover of M/s ........................................................... for the past three years are given
below and certified that the statement is true and correct.
Turnover in Crore (Rs)
Sr. No.
Year
1.
2008-2009
2.
2009-2010
3.
2010-2011
Turnover in Crores (Rs.)
Date :
Seal :
Signature of Auditor / Chartered
Accountant
(Name in Capital)
Annexure-VI
Ref. Clause No.
SPECIFICATIONS OF EQUIPMENTS
Tender No.
Sr.
No.
1.
2.
Item
Code
Name of Item /
Equipment
Specification Compliance /
Deviations
ANNEXURE-IX
Ref. Clause No.
DETAILSOFMANUFACTURINGUNIT/AUTHORIZED DISTRIBUTORS
Name of the Tenderer & Full Address
(Whether manufacturer / authorized distributor)
PAN number Phone Nos. Fax No.
E-mail Address
Date of Inception
Equipments Manufacturing / Distribution License No & Date
Issued by
Valid upto
CST / VAT Registration No.
If bidder is authorized distributor then name, address, telephone, fax of authorized manufacturer.
Name & Designation of Authorized Signatory
Signature of the Authorized Signatory
The details of manufacturing unit I authorized distributor shall be for the premises where items
QuotedareactuallymanufacturedIstoked.
ANNEXURE- X
Ref. Clause.
PRICESCHEDULE
Sr. Code
No.
(1)
(2)
Name of
Name of
Make
the
Manufacturer
&
Model
Equipment
No.
/ Item
(3)
(4)
(5)
Rate per unit
Rate of
Rate of
(Landed
Excise /
CST /
Price)
Custom
VAT as
(Inclusive of
Duty
applicabl
excise /
(included
e
custom duty, in quoted
transportation, rate per
unit)
insurance, and
any incidental
charges etc.)
(6)
(7)
(8)
Place :
Date :
Signature
Name in Capital Letters
Designation
Note : This format of price schedule is a sample for the Bidder's Price schedule should not be
submitted in Technical Bid, otherwise tender shall be rejected.
ANNEXURE- XI
Ref. Clause No.
PRICESCHEDULEFORANNUAL)
/COMPREHENSIVE(INCLUDEFREELABOUR,REPAIR,OTHERSERVICES&SPAE
PARTS)MAINTENNACECONTRACT(. /C.M.C.)AFTEREXPIRYOFWARRANTY
(RATESSHOULDBEQUOTEDINPERCENTAGEOFTHEVALUEOFTHEMACHINE)
Sr.
No.
Code
No.
(1)
(2)
Name of For first
the
year
Equipment
with
spare
parts
and
labour
(3)
(4)
For
second
year
with
spare
parts
and
labour
(5)
For
third
year
with
spare
parts
and
labour
(6)
For
For fifth
fourthyear
year
with spare
with
parts and
spare
labour
parts
and
labour
(7)
(8)
For
sixth
year
with
spare
parts
and
labour
(9)
For
seventh
year with
spare
parts and
labour
Place :
Date :
S
ignature Name
in Capital
Letters
Designation
Note : This format of price schedule is a sample for the Bidder's Price schedule should
not be submitted in Technical Bid, otherwise tender shall be rejected.
Prefer of CMC Separate perform Guarantee Three Years
(10)
CHECK LIST FOR ENVELOPE A (Must Be Submitted as Page-1)
Check list for Terms and Conditions (To be filled by the bidder and submitted along with E n v e l o p - A )
Page No. must be mentioned against each serial.
S.No. Particulars
1.
2.
Check List Page One.
Covering Letter of company/ bidder
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13
14.
15.
EMD and Tender document fee.
The Bidder Should submit list of quoted item as per format given
16.
Registration Certificate of Bidder (Such As Proprietor Ship, Partner, Article of Memo. etc )
Bidders registration under Commercial Tax Authority.
Annexure - I (Sales Tax Clearance Certificate)
Annexure-II (Manufacture Authorization Form)
Annexure - III (Declaration / Undertaking Form)
Annexure - V (Annual Turnover Statement)
Annexure - VI (Specification of Equipments)
Annexure - IX (Details of Manufacturing Unit)
Annexure - X (Price Schedule)
Annexure – XI (Details of CMC )
The bidder should also submit national & international quality certificates like ISI/CE/C
ISO-9002, .X, IP/BP etc" mark / IEC standard or equivalent certificate of quoted product,
if available, products passing USFDA criteria shall be preferred.
Concern / Company have not been debarred / blacklisted either by The purchaser or by
any State Government or Central Government Organization. Affidavit to this effect shall
be submitted by the concern / company Affidavit that the firm has no vigilance case / CBI
case pending against him / supplier. Affidavit that the firm is not supply the same item at
the lower rate quoted in the tender to any Govt./ Semi Govt. or any other organization
17.
Original Bid Form duly signed by authorized signatory as per Section V, duly sealed and
signed by the bidder on each page for acceptance of Terms and Conditions.Please submit
Only Annexure V (as whole tender documents from page No. 1 to 23)as acceptance of all
terms and conditions of tender from page No. 1 to 23, (This Section V page will be
considered as acceptance of all tender terms and condition from the bidder)
(Save Paper Save Environment)
18.
19.
Statement of good financial standing from bankers
In case of imported equipment IEC certificate of importer / bidder shall be submitted.
20.
Equipment mentioned as a set will only be considered of all the equipments are quailed
and price will be calculate to gather
21.
Any other document required as per tender document or tendered wants to submit for
support stander.
22.
Technical/Financial bid documents must not be submitted with this envelope.
Yes
No
Enclosure
No.
CHECK LIST FOR ENVELOPE B (TECHNICAL BID) (Must Be Submitted as Page-1)
Check list for Terms and Conditions (To be filled by the bidder and submitted along with E n v e l o p - B )
Page No. must be mentioned against each serial. This envelop must be submitted department wise.
S.No. Particulars
Yes
No
Enclosure
No.
1.
Check List Submitted as page No.1
2.
Technical bid for the quoted equipments etc. should be signed and stamped on each
page. The bidder shall submit the specification's compliance / deviation report duly
filled and signed which clearly bring out the deviation from the specification if any
given in Annexure-VI.
A list of user of quoted equipments by the Principal Manufacturer for last three years. These list should also
contain the supplies related to the Govt. hospital/Medical Colleges / Public Sector undertaking / Undertaking
hospital and other institutions of repute. Bidder should submit details of installation in Annexure IV
3.
4.
5.
Literature of original catalogue of the product attached for reference in two copies
Quality certificates such as CE/ US FDA product wise
CHECK LIST FOR ENVELOPE C (FINANCIAL BID) (Must Be Submitted as Page-1)
Check list for Terms and Conditions (To be filled by the bidder and submitted along with E n v e l o p - c )
Page No. must be mentioned against each serial. This envelop must be submitted department wise.
S.No. Particulars
1.
Yes
No
Check List Submitted as page No.1
Enclosure
No.
1
2.
Financial bid for the quoted equipments etc. should be signed and stamped on each
page (ANNEXURE-X)
3.
CMC charges as per Annexure XI.
4.
Bidder should show recurring expenditure of each equipment separately.
DEAN,
GANDHI MEDICAL COLLEGE BHOPAL
NAME OF EQUIPMENT AND SPECIFICATION
S.No Item
.
Name of Equipment
Specification
Code
DARMATOLOGY
RADIOFREQUENCY UNIT
Frequency 3.8 Mhz
Power output 140 walts
Tungsten wire electodes
Autoclavable hand piece and neutral Plate
Finger switch and foot switch activated
HYFREQUATOR
Frequency 3.5 Mhz
Power 140W
WOODS LAMP
DERMASCOPE
ELECTIC DEMA BRADER
Output-40 V A, Speed foot control
IONTOPHORESIS UNIT
Hand and Foot Plate
Comp
Devi
CAUSELTY UP GRADATION
OPERATION THEATER
MONITOR
DEFIBRILLATOR
Amotating Recorder: Documents ime, date and energey selection
MONITOR
Heart rate Monitoring Continuous display
Three Leads Select paddle monitoring for rapid patient ECG assessment
Individual Batteries for greater reliability
Synchronizer : Reverts to a synchronizer mode
Mine Energy Setting Five to 360 joules
ECG MACHINE
LEAD SELECTION
Leads 12-lead selection
Selector positions : I, II, III, aVR, aVL aVL, V, ImV
FREQUENCY RESPONSE
Frequency response: 0 05Hz to 100 Hz (-3dB)
PATIENT SAFETY
Isolation Floating input isolation
Patient leakeage current: Less than 10 UA (220V/50Hz)
SENSITIVITY
SENSITIVITY
Sensitivity: 5mm/mV, 10mm/mV, 20mm/mVPush button selectable
Auxiliary Input: 10mm deflection for 30 nmV Input
Scope Output : Output voltage 500m V at 1m Vinput voltage gain 1
Calibration: 1m V push button, effective at input amplifier
CMRR:Better Than 10 dB
INSTRUMENT STERILIZER
Dimensions: 430x200x150mm
Capacity: 2000w
IS No: IS 5022-1979-220/250V single phase 50 cycles
BOILER
Small
Big
PLASTER SAW
Electrically OPerated
OXYGEN CYLINDERS
(JUMBO SIZE)
OXYGEN CYLINDER
(SMALL SIZE)
LARYNGOSCOPE
Adult
Paediatrics
AMBU BAG
Adult
Paediatrics
WEIGHING MACHINE
Adult
Paediatrics
WATER BED
Standard
REFSRIGERATOR
265 liters
CARDIO THEROSIC SURGERY
MANNUAL BED
The bed should have following features.
Split slide rails should have a clocking movement, tuck away to allow
zero gap transfer for safe any easy patient transfers, Hi low, head knee,
gatch function.
One step head board removal for access tp patient head. Blow - molded
removal head and foot boards. Instant CPR
12 trend and reverse trend for emergency situations with angle
indicator.
Corner roller bumpers
Four position IV pole mounts.
Should be supplied with septate cranks for each function.
To be supplied with pressure reduction / shear reduction mattress and
IV pole :
IPX4 standard for fluid ingress.
Should be FDA compalint.
SYRINGE INFUSION PUMP
Should have KVO rate can be selectable according to concrente
requirement from 0.1 ml /h to 0.fml/h.
Should have excellent injection operation, the accuracy will be ensured
even at small volume injection.
Should have accept all standard syringes of 5 ml 10 ml 30 ml and 50 ml.
It will self diagnose and display the syringe size and set parameter
automatically in the form of menu.
Should have alarm is given when there is malfunction or operation
errorand the machine stops running automatically.
Should have accuracy +2%
Should have injection increment 0.1 ML/H
Should have electrical safety : comply with the stipulation of
IEC 6061-1:1996
CRASH CART
Frame work made of stainless steel tubes.
Overall approx. size 800 mm (L)x 600 mm (w) xl 400 mm (H)
One drawer and 4 shelves
Oxygen cylinder cage and I.V. rod
mounted on 125 mm dia casters.
Switch and socket panel for medical equipment.
Pre-treated and expoxy power coated.
VACCUM CLEANER
Domestic Vaccum Cleaner for OT/ ICU
DEPARTMENT ORTHOPAEDIC
ECG MACHINE
SPINE INSTRUMENT SET
Segmental spinal system implants
SVR type mono satrel screw
Dia - 6.5 mm, 5.5 mm (4.5 mm)
Length : 25 mm to 50 m (diff 5 mm)
SVR type poly sacral screw
dia length
SVR type mono reduction screw
dia
length
Transverse connection
Slaple
Rod 5 mm
length 75 mm to 300 mm (diff. 5 mm)
Rod 3 mm
Length 60 mm to 150 mm (diff 5 mm)
Hook Implants and Instruments system
Laminar hook wide blade
Laminar hook narrow blade
Laminar hook angle blade
Transverse process hook left / right
Insert for line hoo holder
Compact hook holder
Laminar Elevator
Pedicle elevator
In line hook holder
Theroc faced finder
Expansive cage implants and instruments system
Cage - dia - 12 mm to 20 mm (diff 2 mm)
Length - 30 mm to 90 mm (diff 5 mm)
Expand upto 30-40 mm 40-65 mm
50-75, 60-90 mm
- dia - 10 mm to 20 mm (diff 2mm)
-length - 10 mm to 100 mm (diff 5mm)
Expandable rotater straight
Expandable rotater curved
Expandable Pusher straight
Expandable pusher curved
Expandable case holder straight
Expandable case holder curved
Expander locked screw driver
Spine Implants
SVP type mono sacred screw
SVP type poly sacred screw
SVP type mono sacred screw
SVP type poly sacred screw
SVP type poly sacred screw
Dia - 4.5 mm, 5.5 m, 6.5 mm, 7 mm
Length - 25 mm to 50 m (diff 5 mm)
Spinal instruments system
Staple driver
Probe flat
Depth Gauge
Statue Awl
Probe curve
Mono axial screw driver
State awl (mass)
Pedial sounder
Poly Axial screw driver
Pedical centralizer
Tap 4.5 m
Mono screw find tightener
90 degree and
Tap 5.5 mm
Rod holder regular
Probe round
Tap 6.5 mm
Open rod pusher
Closed rod pusher
Sagittal rod approximate
Wice clip
Inner screw translator
Rod stablier
Compressor
Rod bender
Inner scrw tightener
Spreader
Poly arial screw lightener
Rod bender right and left
Spondylolishthesis reduction
Screw holder
Smell rod fork
Spodylothesis reduction screw breaker
Large rod fork
Wice grip
Rod bender
Self Retaining retractor - Small
- Medium
- Large
Cobbs retractor
Distractor
Nibbler - Small
- Curved
- Straight
Laminectomy forceps
Rib cutter
Nerve elevation
Hammer
Dissecting forceps - Straight - Angle
Bur
Probe
Sound - Straight - Angled
Kasper Distractor
Rangle - Up - down
PUBLIC ADRESS SYSTEM
BONR HOOK
WIRE CUTTER
BONE CURETTE
PERIOSTEUM ELEVATOR
RING CURETTER
PULSE LAVAGE PUMP
METZENBAUM SCISSOR
MAYO SCISSOR
LITTAUER LIGATURE
SCISSOR
STANDARD DISSECTING
FORCEPS
GILLIES DISSECTING
FORCEPS
BACKHAUS TOWEL CLIPS
ALLIES TISSUE FORCEPS
SPONGE HOLDING
FORCEPS
KOCHERS FORCEPS
HALSTEAD MOSQUITO
FORCEPS
MORRIS RETRACTOR
LANGENBECK
RETRACTOR
SINGLE SKING HOOK
RETRACTOR
BP HANDLE
ADSON'S BABY
RETACTOR
LIGHT SYSTEM
VOLUME INFUSION PUMP
ELECTRIC DRILL SYSTEM
MANUAL DRILLS
ELECTRONIC PNEUMATIC
TOURNIQUET
ELECTRIC PLASTER
CUTTER
INTERLOCKING NAIL
INSTRUMENT SET
UNIVERSAL FOR TIBIA
AND FEMUR
GLUCOMETER
DIGITAL B.P.INSTRUMENT
SET
LED VIEW BOX
SHORT WAVE
DIATHERMY
Output 500 Watts, Floor Model, LED Display, Timer with audible
alarm, one pair of Both disc and rubber electrodes and one neon tester
lamp.
OPHTHALMOLOGY
DIRECT
OPHTHALMOSCOPE
1. Dust proof newing aperture, lens wheel = 20 to 35 D
complete with handle, run on dry cells two of 1.5 V
2. For the examination of narrow and dilated pupils silt and
fluoprescene opthalmoscony and the fixation test changes at the front of
the eye and to the occular 1 undus become visible.
3. Bayonet fitting for fast and secure attachment to the handle.
4. Glass fibre reinforced casing, particulary, sturdy, light weight and
durable.
5. Simple excharge of the lamp at the base of the instrument head.
6. The product shall comform to the all international standard /CE mark
certificate to his effect shall be provided by the tendered.
Additional features, if any.
Name of the manufacture.
Model No.
STERAK RETINOSCOPE -
1. Retinoscope, self luminous type halogen lamp 2.5 V. generated
WITH DRY CELL BATTERY streatk long enough to intersedt the axis scale of trial frame (or
refractor)
2. Provision should exist to smooth and stepless rotation of streak
throughout 360 Deg. Dust proof aperture.
3. Focusing movement should permit planeand concave mirror
vergences with parallel and converging beam (adjustable beam)
4. Powered by two dry cells accomodated in large handle. Three extra
bulbs in original padde case.
Additional features, if any. Name of the manufacturer.
TONOMETER (SCHIOTZ)
1. Stainless steel indentation. Tonometer in steel body with additional
weights, zero test block and pull through with calibration chart as
certified by original manufacture calibrated to standard tension
conversion with 5.5, 7.5 and 10 gm weights.
Generally conform to Indian standard specification IS 12947L1990
specifically type.
Additional features, if any.
Name of the manufacture
Model No.
KERATO METER
Professional instrument for precision measurement of radius of
(OPHTHALMOMETER)
curvature of the anterior comeal surface in millimeters and dioptenic
power of the comera. Also capableof measuring comeal astigmatism
with axis and convex and concave surface of contact lenses. Equipment
shall have following features.
1. Measuring range : Diopteric power 36-O. O52.0 diopters in 0.25 D
steps (or closer) Radius of curvature 5.0 to 10 mm in 0.05 mm steps (or
closer)
2. Axis of comela / stigmatism 0-1800 in 5 steps.
3. Eye pieces : 15 x with adjustable diopteric power of +5 Diopter or
more.
4. Objective lens : Precision achromatic lens.
5. Electric supply : 220V-240V,50Hz
6. Illumination 6 watt with transformer
7. Calibrating steel balls
8. Essential spare
a) Bulb : 6 Nos. (b) Bulb : 4 Nos.
Equipment shall K-CE marked
Additional feature - if any.
Name of the manufacturer
Model No.
TRIAL SET
Trial set spherical, cylindrical, convex and concave lenses set in
superior quality box with occulder, pinhole, red-green glasses, stenopis,
slit, prism etc. Adjustable PD and nasal bridge trial frame and paediatric
size (superior quality and heavy duty)
ISHIHARA COLOR VISION
CHART
Ishihara color vision book for checking color vision, original on good
quality paper.
SNELL'S TEST TYPE
CHART (ROTATING TEST
DRUM)
Option no. - 1 Vision Chart (illuminated) with remote control base on
snellens test type, must have Hindi, English, E-Chart and Landots
broken ring (should have capability for use as direct and reversible
chart) with worth 4 dots and Duochrome test. Power supply 220-240V0
Option no. 2 vision chart (illuminaed), rotating drum having 4 panels
having snellens test type hindi, English, E-chart & Landots broken ring
(shoudl have capabilty for use as direct and reversible chart) with worth
4 dots and duochrome test. Power supply 220-240V.
LENS FOR EXAMINATION
OF POSTERIOR SEGMENT
90D
Antiglare coated, utilizable lenses for exam of posterior segment
MICROBIOLOGY
DISTILLATION PLANT
Double distillation plant with stand not wall mounted and approx 5-10
litres / hour output.
With instant distilled water flow.
Easy to operate, durable, safe for routine use.
Quart distiller, Demountable boiler.
Panel box and stand to accomodate regulator and electrical supply,
clamps etc.
Quality of distillate - pyrogen free, pH 6.9-7.0 High purity low
conductivity.
Distilled water should be free from heavy metal, salts pyrogen and iron.
Specific conductivity at 25 deg C less than 0.4 x 10-6S/cm
Glass material (or chemical inert material).
Equipment should be thermal shock proof.
Gas vent should be there to remove volatile impurities leaving the
condensate free from gaseous impurities.
Automatic low water cut off.
Turbing should be made up of good quality rubber (heat resistant).
Wiring of the equipment should be enclosed in case.
It should be deconcentrator a bleeder device on the evaporation that
constantly removes a part of the boiling water from it so that the
cumulative concentration of non volatile impurities in the water is
prevented.
All consumables required for installation and standardization of system
to be given free of cost.
The unit shall be capable of being stored continuously in ambient
temperature of 0-50 deg C and relative humidity of 15-90%.
The unit shall be capable of operating continuously in ambient
temperature of 10-40 deg C and relative humidity of 15-90%.
Power input to be 220-240 VAC, 50 Hz fitted with Indian plug.
Suitable voltage corrector / stabilizer.
Three years warranty, 5 years comprehensive AMC should be available
with service centres in close proximity.
Should be compilant to ISO 13485 : Quality systems - Medical devices Particular requirements for the application of ISO 9001 applicable to
manufactures and service providers that perform their own design
activities.
BIOLOGICAL SAFETY
CABINET
Class 100 Bio safety Cabinet
Size - 4x 2 x 2
stainless steel top
2 ft x 20 watt tubelight
Re-circulation of air.
Sliding Sash
Filtered exhaust
supplementary air barrier
Glove ports and gaultlets
Fumigation Tray
Built in U.V. Germicidal light
Cock for gas
static pressure manometer
virus burnout unit
Exhaust system of 6 ft duet and 10 runnning ft of exhaust ducting.
INOCULATION HOOD
Stainless steel
Size 4x 2 x 2 ft
Stainless steel top
Glass / fibre Front door
1 Ft. x 20 watt tubelight
UV germicidical tube
Should have glove ports
Cock for Gas
ANAEROBIC SYSTEM
Transparent Polycarbonate,
1.5 ltr, capacity sturdy jar
with aluminium lid clamp and
sealing ring with build in sfety features and
pressure valve with sfety valve and 2 way, pressure gauge.
INSPISSATOR
Stainless steel (50 tube) digital temp. display timer
CENTRIFUGE MACHINE
Square Design
Swing out x Fixed head
Multistage tube speed Regulator
Speed 5000 RPM, Sixteen tubes with timer, 220-240 Volt.
REFRIGERATOR
2 - 8°C - 450 liter
SEANNER
ANATOMY
CADAVERIC INJECTION
MACHINE (EMBALING
MACHINE)
For injecting formaldehyde solutions in cadavers and much higher
speed than normal gravity process. Unit to be covered and mounted on a
portable trollery having four castor wheel for easy movement. Unit
consisting of one air compressor filled with half HP motor which is
connected with stainless steel tank of 10 liters capacity ment for storage
and injecting the solution. Tank to be fitted with safety valve, pressure
gauge and rubber tubing having provision for injection. Supplied with
complete electric cord plug suitable to work 220 volts 50 hz AC supply.
DIGITAL VIDEO IMAGING
Color corrected with din plan optics.
SYSTEM
Resolution more than 400000 pixels high resolution chip, RCA, SVideo, USG 2.0 output, high resolution built kin digital camera to
produce brilliant image. Video and digital signals can be obtained at the
microscope base and displayed on TV set and PC monitor at same time
by high resolution CCP chip. Built in Mock / digit converter.
40x to 1000x standard magnification range optionally up to 2000x with
additional eye piece.
A versatile software for image depturing, processing and editing.
DISCO TORSO 15 SILCES
Horizontally sectioned in to 15 silces showing topographical relations.
MICROSCOPE COMPOUND
With 3 objectives compound light microscopes 30x, 40x and 100x fitted
with mechanical stage and vernier scale resolutions of lenses
comparable grids.
BIOCHEMISTRY
BALANCE SEMIMICRO
CENTRIFUGE MACHINE
Semimicro balance should have the following feature
Type
Analytical Balance
Capacity--g
100
Repeatability-g
Linearity-g
0.00003/0.0001/0.0002g
pan size
Weighing units
Stabilization time
20/50/100
Power- VAC
Auto shutoff
Calibration
Output
Housing dimensions
13-1/2"D
115
Yes
Internal
Rs-232
8-1/2" Wx13-1/2" Hx
2.5"-5"
gm, mg, microgram
2sec
(2-simple)- 5---RPM
(1-Rotafix)
Technical specification
Centrifuge Machine should have the following feature
1. Tube Capacity: No. 24-36
Size 5-15-15ml
2. RPM:
Up tp 6500-7000
3. Should have a digital timer
4. Aerodynamic compact construcion for vibration free
performance
5. Body should be made of strong fabricated steel & corrosion
resistance.
6. Body should be made of strong fabricated steel & corrosion
resistance
7. Separate control panel for start/stop switch dynamic brakesm step
less
speed regulator with zero start & speed incicator timer and protective
fuses.
8. Door interlock.
9. Appropriate voltage stabilizer
10. 2 year warranty with 5 years comprehensive maintenance contract.
CALORIMETER
Colorimeter should have the following feature range : 0 to 100%
transmittance
Wavelengths : REd (660mm) orange (610 nm)
Accuracy : +0.5% transmittance
Resolution : +0.1% transmittance
Default sample rate 1 sample /see
Maximum sample rate : 5 sample / sec
Temp. Range .5-400C (Recommended)
ELECTRONIC WEIGHING
MACHINE
Weighing capacity from micro gm to 220 grams, LED display accuracy
0.01/0.1 mg.
DENTIST
APICAL ELEVATOR
STRAIGHT (S.S)
APICAL ELEVATOR
CURVED
STRAIGHT ELEVATOR
NEEDLE HOLDER ALL
SIZE
BONE NIBBLES
FILLING MATERIAL S
GLASS ISOMER
SILVER ALLOY SOLLIA
CLOVE OIL
FORM CRESOL
IMPRESSION COMPOUND
ARTICULATOR PLAIW
PROTAPER SET FOR RCT
PROTAPE WANDPRICE
MICROMOTER
MOUNTED DENTAL XRAY VIEWER
EXTRACTION FORCEPS
(A) UPPER RIGHT & LEFT
SS
IMPORTED STAINLESSS STEEL, GERMAN MADE
(B) HOWER RIGHT & LEFT
SS
ROOT CUTTING FORCEPS
(A) UPPER RIGHT & LEFT
SS
(B) HOWER RIGHT & LEFT
SS
EXTRACTION FORCEPS
(A) LOWER INCISOR
(B) UPPER INCISOR
EXTRACTION FORCEPS
(A) UPPER PREMOLAR
(B) LOWER PREMOLAR
GRYESS (RIGHT & LEFT)
WIRE CUTTER
(IMPORTED)
ROOT CANAL PLUGGED
CU-RATES & 0 &
(ASSOSTED)
NUMIT XYLOCAINE
ERICH ARCH BAR
GANZE & SOFT WIRE
ROLE (INTRADENTAL)
SUTURE CUTTING
FORCEPS
AUTOCLAVE-(10 LITER
FOR OPD)
BIPOLAR UNIPOLAR
ELECTRO QUTARY
STANDING 05 LIGHT
MOBILE SUCTION
MACHINE
MINI PLATE 2MM
TITANIUM
MINI PLATE 2-5MM
TITANIUM SCREWS
2X6MM, 2X8MM
TITANIUM SCREWS
2.5MMX10MM
TITANIUM
RECONSTRUCTION
PLATE (2.5MM)
L-SHAPE & STRAIGHT
SCREW DRIVER
2.5MMX2MM
SCREW HOLDER
PLATE CUTTER
PLATE BENDER
PLATE HOLDER
OSCULATING
QESTOTOMY SAW
HAY TONS WILLIAM'S
FORCEPS
BONE HOLDING FORCEPS
ROCHES AND CANOLA
ROWE S DIGINPACTION
FORCEPS
AESHI SEPTAL FORCEPS
WELSHMAN'S FORCEPS
BRISTOL S ELEVATOR
(ZYGOMATIC)
ROVE'S ZYGOMATIC
ELEVATOR ARCH
CHISELS
OSTEMOES
KILLERS RETRACTOR
ARTERY FORCEPS ALL
SIZES STRAIGHT CURVED
RIGHT ANGLE
RETRACTOR
AUSTIN'S RETRACTOR
META ZBSIM SCISSOR
DISSECTING SCISSOR
(SMALL)
PERSISTED ELEVATOR
DOUBLE ENDED
PERIOSTEDAL ELEVATOR
RAND BUN FOR HAND
PIECE
PHYSIOLOGY
HAIR AESTHESIOMETER
compass aesthesometer for two point discrimination, thermal
aesthometer with hot and cold points, von freys aestesiometer for tactile
sensation
DYNAMOMETER
Hand writing (grip) of dynamometer
ERGOGRAPH
MOSSO'S Combination of advantageous feature of both the Dubiois and Mossos
WITH WRITING LEVER
ergograph. The recording unit with the automatic ratchet recording
system follows the dubois design and arm rest, finger holder and straps
follow Mossos' design complete with one set of 5 kg weight.
SIMPLE SPIROMETER
Spirometer 6 liter capacity, stainless steel chamber with chain
compensated counter baalnce to float pulley calibrated to denote
volume, inlet and outlet tubes, complete wtih corregulated rubber tube,
mouth piece and recording lever.
STETHOSCOPE
Stethoscope with a single chest piece and multiple ear pieces for
DEMONSTRATION WITH demonstration purposes.
MULTIPLE EAR PIECE
PREISTLEY
SMITH Preistley Smith Table model brass with arrangement to fix perimeter
PERIMETER
chart attachment with scale and pointer rotating arc fitted with movable
HAEMOCYTOMETER
disc with arrangement for different objects with 100 charts and table.
COMPLETE SET WITH
IMPROVED
CHAMBER
NEUBAUR'S Hemocytometer complete with improve chamber german make
HAEMOGLOBINOMETER
HELIGE (COMPLETE SET)
Helige with rectangular tube germen make
CENTRIFUGE MACHINE
filled with digital speed meter and digital 12 x 15 ml swing out angle
head
STETHOGRAPH
WITH Corrugated rubber tube with side clips open chain for use in any
MAREYS THAMBOUR
tambour
AUDIOVISUAL REACTION Recording device amounted on wooden base
TIME RECORDER
PATHOLOGY
LABORATORY
CENTRIFUGE
(RESEARCH)
Table top model with swing out rotor head 16 tubes of 15ml.glass tubes.
Digital speed indicator with 60 min. Count down timer.
Speed 4500 rpm & RCF3485 with rotor head.
Dynamic breaks, Imbalance detector, cut-off in case of uneven load.
Brushless induction motor with frequency drive.
Step less speed regulator & safety lid interlock to prevent lid opening
during operation.
7segement LED display of speed.
220-240 volts, 50 Hz.
LABORATORY
CENTRIFUGE
Table top model with swing out rotor head 16 tubes of 15 ml. glass
tubes.
Digital speed indicator with 60 min. Count down timer.
Speed 4000rpm & RCF2750 with rotor head.
Dynamic breaks, Imbalance detector, cut-off in case of uneven load.
Step less speed regulator & safety lid interlock to prevent lid opening
during operation.
220-240 volts, 50 Hz.
ROTARY MICROTOME
(SPENCER TYPE)
Manual Rotary microtome with knife holder and specimen holder and
all accessories.
With imported heavy duty knives 200 &240 mm
Range of thickness 0.5 um to 60um, increment 1um to 10um
Horizontal advance of specimen 30mm and vertical stroke 60mm.
Universal knife holder base for different knives along with disposable
knife holder with safety finger protection guard.
Maximum specimen size 50x60x40mm
BONE DECALCIFIER
DIGITAL
Suitable for use in histology for decalcification of bone tissue by
electrolytic action.
Through the combination of heat and fluid agitation.
Basket movement provided by an electric motor to raise and lower
the basket as well as rotate it.
Digital temperature control and display along with timer.
KNIFE SHARPENER
AUTOMATIC
Automatic Knife Sharpener A.O. Spencer Type for manual knives.
To permit perfect cutting edge at an equal bevel angle on both sides.
Constant rotation of ground glass plate.
Can hold Knife up to 300mm and should have metal scale 0-25o
with 1o divisions.
Unit should be powder coated.
TUBIDOMETER
Semi automated analyser with end point, kinetic, fix time MSD and
absorbance modes.
90 open location for open MSD
Atleast has 6 programmes in MSD
Should have automated flagging of outline results.
Measuring system with cuvette mode.
Filter range Biomatic filter 340,405,505,546,578,630
Temp. 37C with temperature lock
Measuring range -200 to +2000 OD
PARAFFIN DISPENSERS
DIGITAL
Specially designed equipment to dispense wax for embedding.
Capacity 3litres/ 5litres
Thermostatically controlled tem. With Tap having Temp. Control at 56 o
COAGULOMETER
4 channel optics
Low reagent volume 25µl assay range 50 – 8.000 ngm/ml
Can be used for clotting based chromogenic method.
PC interface option
Should be provided with electronic pipette of 25 - 200µl
Open sustem facility for reagents and automatic INR calculations
Machine to be installed by the company personnel, operational with all
tests running.
Starter kits to be provided
Training of operators by experts
JAMSHEDI NEEDLE :
For Bone Marrow Biopsy , Pure stainless steel (impetrated)
HEMOGLOBIN
Horizontal Tank
ELECTROPHORISIS
EQUIPMENT WITH
POWER PACK
MICROWAVE OVEN
WITH CONVECTOR –
20LTS
NEPHLOMETER
PAEDITRICS SURGERY
Radiant Warmer
Miscellaneous
operating instruments
(Froceps, Scissors etc.)
Needed for paediatric Surgery NICU and for use in
infants.
Needed for routine use in Paed. Surgery O.T. All
operating instruments must be of Standard Company.
NEURO SURGERY
1
2
3
4
5
6
7
8
9
10
11
12
Surgicel small 2x3
Surgicel fibrillar
Gelfoam
Haemolok
Botroclot
Bonewax
G patch ( artificial
dura)
G- graft (artificial
7mm *8mm)
V-P Shunt
(low/med/high pres.)
Fogarty catheter no.
3,4,5
Ventricular system
with closed collecting
system
Ventricular cathter
with Y-Connector
G.I. SURGERY
1. 1
2
2.
3.
4.
5.
6.
7.
8.
Intensive Spirometer
Abdominal binder- small
Abdominal bindermedium
abdominal binder- large
PTBD Set
Abdominal binder- Extra
large
Disposable Linear Cutter –
55mm
linear cutter of 55 mm with
inbuilt selectable staple height.
Disposable Linear Cutter
Reloads – 55mm
Universal black reload
compatible with the 55mm
linear cutter with inbuilt
selectable staple height.
Disposable Linear Cutter –
75mm
linear cutter of 75 mm with
inbuilt selectable staple height.
Disposable Linear Cutter
Reloads – 75mm
Universal black reload
compatible with the 75mm
linear cutter with inbuilt
selectable staple height.
9.
Curved Circular stapler 21,25,
29, 33 mm with controlled
tissue compression.
10.
Feeding jejunostomy
bag/tube
Stoma bag- Disposable
single plate Adhesive type
small/medium size
stoma bag- disposable
double plate Adhesive
type small/medium /large
size
Stoma bag- Disposable
wound manager
Stoma Adhesive/ paste
Skin barrier powder
Wash proof dressing
15*6cm
Hemmorhoidal Circular stapler
33mm with controlled tissue
compression, Leg length of
4mm.
11.
12.
13.
14.
15.
16.
17.
18.
Disposable Endoscopic cutting
and stapling devices 60mm
60 mm endoscopic cutter and stapler with cambered
anvil and C shaped knife with a knife blade indicator ,
22mm distal jaw opening and 8 mm proximal, shaft
length of 340mm
Disposable Reloads for Endoscopic cutting and stapling
devices 60mm
Reload – 1mm
Endoscopic cutting and stapling devices 60mm Reload
with cut line of 57mm and a staple line of 60 mm with
closed staple height of 1 mm and open staple leg length
of 2.5mm.
Reload – (1.5mm)
Endoscopic cutting and stapling devices 60mm Reload
with cut line of 57mm and a staple line of 60 mm with
closed staple height of 1.5mm and open staple leg length
of 3.5mm.
Reload – (1.8mm)
Endoscopic cutting and stapling devices 60mm Reload
with cut line of 57mm and a staple line of 60 mm with
closed staple height of 1.8 mm and open staple leg length
of 3.8mm
Reload – (2.0mm)
Endoscopic cutting and stapling devices 60mm Reload
with cut line of 57mm and a staple line of 60 mm with
closed staple height of 2 mm and open staple leg length
of 4.1 mm
URO SURGERY
1)
Crytoscopy Bridge single channel
2)
Working element passive cutting
used for 26tr. Sheath (Imported)
3)
Outer sheath for resectoscope (26fr)
(Imported)
4)
Inner Sheeth for resectoscope (26fr)
(Imported
5)
Sach’s cold knife (Urothrotome
knife)
6)
20 fr Sheath for urethrotome
7)
Visual obturator for TURP
8)
TURP Cutting loop Double stem
9)
Collin’s knife
10)
Uretheral Catheter open end 6Fr.
11)
UretheralCatheter open end 5 Fr.
12)
Uretheral Catheter Open end 4 Fr.
13)
Guide wire (Hydroplilic)Terumma
0.035’
14)
Guide wire Straight tip 0.-35’ 150
CMs
15)
Guide wire 150 CM J.tip 0.038
16)
Fascial dilator set
17)
Pigtail PCN Catheter 12 fr. & 10 fr.
18)
19)
20)
21)
Initial Puncture needle 16 Gauge
22)
23)
D.J. Stent 6/26 Fr.open end
D.J. Stent 4.5/22 fr. End
Trucut Biopsy needle 16 Guage for
prudent Biopsy
Supra pubic Trucar with Cannula
Malecut PCN Catheter 10 & 12 fr.
ENT
1
Rigid nasal endoscope
2
Fiber optic source
3
4
Mastoid set
Electric Cautery with all
accessories
5
Micromotor Drill
6
7
8
Shea Microear Surgery set
Biopsy forceps cupped tip/
crocodile tip of different size
of scopes
Sickle knife
9
Blaksley’s forceps
Hopkins rods, Storz/Hawks with accessories for the
same 4 mm, 45o, 75o.
2.8 mm, 30o.
Halogen bulb with mirror 15v, 150W,
size 186(w)x151(h)x270(d).
Required 1 each in number
1. Heating voltage : 0-3 V (no load).
2. Heating current : 5.5 A - 13.5 A.
3. Spotlight Voltage : 0-2.5 V.
4. Supply Voltage : 220/110, 50 Hz.
5. Power Consumption : 80 W.
With hand piece.
Korean/Japnese40,000 rpm.
Set of 11 instruments
40cm long tubular action
Pointed 19cm
Blunt 19cm
D/ edge. Pointed 19cm
3mm/ str WL 13cm
3mm/ 45 degree
3mm/ 90 degree
3mm/ 120 degree
10
Antral puncture
4.5mm up cutting WL 11cm
4.5mm Dn cutting
4.5mm rt cutting
4.5 lt cutting
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising