-547817 Elevator Assy, Atomx 080-613 Battery, Lithium, SIZE 2032

-547817 Elevator Assy, Atomx

080-613 Battery, Lithium, SIZE 2032

080-863 Union, 1/4"-1/4", SS, goes on side arm of glassware

110-240 4-port base mounting screw, 6-32 x 1-375 flat head

12-0041-016 Ferrule, teflon, 1/4", glassware

12-0042-016 Union, 1/16" - 1/8" tube stub, brass

12-0043-016 Ferrule set, 1/8", PTFE, 2 pieces (top of needle)

12-0044-016 Ferrule set, 1/8", brass, set

12-0062-016 Ferrules, 1/16", brass

12-0064-016 Bulkhead, 1/8" - 1/8" Tube stub, Brass

12-0069-016 Nut, 1/8", brass

12-0070-016 Tee, 1/8", Brass

12-0073-016 Union, 1/8" brass

12-0074-016 Union, bulkhead, 1/8" brass

12-0075-016 Conn, Male, 1/8" Tube to 1/8" NPT

12-0076-016 Cap, 1/8", brass

12-0083-003 Trap, Tenax (#1)

12-0084-003 Trap, Tenax/Silica gel (#2)



12-0084-403 Trap, Tenax/SG, 12" LG, Stamp "2", U Shape

12-0089-052 10ul calibration syringe

12-0323-001 Screw, 6-32 x3/8" 100 flat HD

12-0323-E01 Screw, 6-32 x 3/4, SS

12-0323-V01 Screw, 100 Deg. flat head (priced each, pkg. of 10)

12-0338-016 Union, bulkhead, 1/8", SS

12-0362-000 Back clip

12-0405-016 Nut, 1/8", SS for bottom of trap

12-0408-016 Ferrule set, 1/8", SS

14-0036-050 Sample valve, 3-port



14-0050-016 Union, 1/8" - 1/16", SS

14-0050-016 Union, 1/8" - 1/16", SS

14-0051-016 Union, 1/16-1/16 SS

14-0051-016 Union, 1/16-1/16 SS

14-0051-016 Union, 1/16-1/16 SS

14-0051-016 Union, 1/16-1/16 SS

14-0051-016 Union, 1/16-1/16 SS

14-0051-016 Union, 1/16-1/16 SS

14-0053-016 Elbow, male, 1/8", NPT, brass




14-0056-000 1/8" NPT to 1/8" Compression

14-0067-027 Allen wrench for sample valve

14-0069-052 5ml gastight syringe w/luer connector





14-0114-050 Syringe valve, 2-port, with luer connector

14-0114-050 Syringe valve, 2-port, with luer connector

14-0122-016 Male luer fitting for syringe valve

14-0122-016 Male luer fitting for syringe valve

14-0124-003 Trap, Tenax/Silica gel/charcoal, 12" x 1/8" (#3)

14-0124-003 Trap, Tenax/Silica gel/charcoal, 12" x 1/8" (#3)

14-0124-303 Trap, Tenax/Silica gel/charcoal (#3)

14-0124-403 Trap, Tenax/SG/Char 1/8" Stamp "3", U Shape

14-0124-403 Trap, Tenax/SG/Char 1/8" Stamp "3", U Shape

14-0140-034 Fuse, 2.0 amp

14-0158-016 Ferrule, 1/16", SS, Set

14-0158-016 Ferrule, 1/16", SS, Set

14-0158-016 Ferrule, 1/16", SS, Set

14-0158-016 Ferrule, 1/16", SS, Set

14-0158-016 Ferrule, 1/16", SS, Set

14-0158-016 Ferrule, 1/16", SS, Set

14-0158-016 Ferrule, 1/16", SS, Set

14-0158-016 Ferrule, 1/16", SS, Set

14-0159-016 Nut, 1/16", SS, Swagelok

14-0159-016 Nut, 1/16", SS, Swagelok

14-0216-016 Female luer connector for sample valve



14-0241-016 Ferrule, 1/16", SS

14-0241-016 Ferrule, 1/16", SS

14-0241-016 Ferrule, 1/16", SS

14-0241-016 Ferrule, 1/16", SS

14-0241-016 Ferrule, 1/16", SS

14-0241-016 Ferrule, 1/16", SS

14-0241-016 Ferrule, 1/16", SS

14-0241-016 Ferrule, 1/16", SS

14-0241-016 Ferrule, 1/16", SS

14-0242-016 Nut, long, for 1/16" tube, Valco

14-0242-016 Nut, long, for 1/16" tube, Valco

14-0243-016 Nut, 1/16", short, SS, Valco







14-0243-116 Nut, 1/16", Short Gold plated




14-0264-016 Union, bulkhead, 1/16", SS, Upchurch




14-0298-039 Cord, power, universal, 115V








14-0356-016 Union, bulkhead, 1/8", filter assembly

14-0440-002 Tubing, 1/16" OD, .04ID, NATL, FEP VAC BAKE

14-0440-002 Tubing, 1/16" OD, .04ID, NATL, FEP VAC BAKE

14-0518-050 Relief valve



14-0521-016 Ferrule, graphitized vespel .4mm ID for 1/16" bulkhead conn.

14-0539-002 Tubing, fused silica, 0.32mm ID, (price/3 meters), 3 meter lengths



14-0540-016 Ferrule, 0.5mm ID, graphite/vespel

14-0540-016 Ferrule, 0.5mm ID, graphite/vespel

14-0546-002 Tubing, copper, 1/8" (per foot, min. 5 ft.)

14-0583-002 Tubing, 1/8" OD, .062" ID, Natural FEP (per foot)




14-0722-009 Washer, no. 6 flat zinc

14-0798-016 Nut, 1/16", SS, Upchurch

14-0798-016 Nut, 1/16", SS, Upchurch

14-0799-016 Ferrule, 1/16", SS, Upchurch

14-0799-016 Ferrule, 1/16", SS, Upchurch

14-1168-003 Trap, blank, 12" x 1/8" (#0)

14-1168-103 Blank 1/8" x 12" Silcosteel lined trap (XPT)

14-1168-303 Trap, blank (#O)

14-1197-039 Cord, Power, 115V 15 A, European Recept






14-1282-034 Fuse holder (panel mount)

14-1301-016 Ferrule, 1/2" Set, Teflon



14-1313-002 Tubing, copper, 1/4" (priced/foot) 5 ft. minimum

14-1313-002 Tubing, copper, 1/4" (priced/foot) 5 ft. minimum

14-1356-016 Union, bulkhead, 1/4", brass

14-1362-000 Hydrocarbon trap





14-1418-016 Ferrule set, 1/4", brass, Swagelok



14-1442-016 Tee, 1/16", zero dead volume, Valco

14-1457-003 Trap, Tenax/charcoal, 12" x 1/8" (#4)

14-1457-003 Trap, Tenax/charcoal, 12" x 1/8" (#4)

14-1457-303 Trap, Tenax/charcoal (#4)

14-1590-016 Nut, plug, Valco

14-1590-016 Nut, plug, Valco

14-1590-116 Nut, Male Plug, 1/16" Gold Plated



14-1591-110 Septum nut, Varian 1040/1041 injection port

14-1591-110 Septum nut, Varian 1040/1041 injection port

14-1591-410 Septum nut, Varian SPI 1075/1077 and Tracor 540 injection ports

14-1591-410 Septum nut, Varian SPI 1075/1077 and Tracor 540 injection ports

14-1591-510 Septum nut, Perkin-Elmer, all Sigma/8000 Series, & Autosystem ports

14-1591-510 Septum nut, Perkin-Elmer, all Sigma/8000 Series, & Autosystem ports

14-1591-610 Septum nut, Shimadzu 9A, 14A and 17A packed injection ports

14-1652-004 Insulation, pipe, 3/8" ID, 6' length

14-1652-004 Insulation, pipe, 3/8" ID, 6' length

14-1668-000 LN(2) transfer line assembly to capillary interface, insulated



14-1719-050 Valve board assembly for 2 position valve, 110V

14-1719-050 Valve board assembly for 2 position valve, 110V

14-1755-003 Trap, OV-1/Tenax/Silica gel, 12" x 1/8" (#6)

14-1755-003 Trap, OV-1/Tenax/Silica gel, 12" x 1/8" (#6)

14-1755-303 Trap, OV-1/Tenax/Silica gel (#6)

14-1758-116 Tee, with graphite ferrules

14-1787-016 Nut, 1/4", brass, Swagelok



14-1812-000 Cryo-2 vent assembly



14-1967-016 Cap plug, 1/8"

14-2052-024 Sparger, 5mL needle, 1/2" (glassware only)






14-2072-002 Tubing, fused silica, 0.53mm ID, (price/meter)




14-2074-016 Ferrule, granite vespel, 0.8mm I.D.



14-2261-016 Union, 1/4 -1/16 Reducing, SS, W/ Teflon Fer



14-2261-116 Union, reducing, 1/4" - 1/16", w/o ferrules

14-2333-024 Sparger, 25mL fritless, 1/2" (glassware only)






14-2334-024 Frit Sparger, 25mL, 1/2" neck, Tekmar






14-2336-024 Fritless Sparger, 5mL, 1/2" Tekmar






14-2337-024 Frit Sparger, 5mL, 1/2" Neck Tekmar






14-2366-003 Trap, OV-1/Tenax/Silica gel/charcoal, 12" x 1/8" (#5)

14-2366-003 Trap, OV-1/Tenax/Silica gel/charcoal, 12" x 1/8" (#5)

14-2366-303 Trap, OV-1/Tenax/Silica gel/charcoal (#5)

14-2366-403 Trap, Char-SC-TNX-OV1 12X1/8, "#5" U Shape

14-2366-403 Trap, Char-SC-TNX-OV1 12X1/8, "#5" U Shape

14-2440-006 Ceramic Standoff for valve oven plate

14-2440-006 Ceramic Standoff for valve oven plate

14-2454-010 Thumb nut #6-32

14-2454-010 Thumb nut #6-32

14-2470-019 Fan, low profile, plumbing cooling

14-2531-800 Cryo valve assembly, 12 VDC



14-2531-900 Dual Cryo valve assembly

14-2535-016 Fitting, Tube 1/8" NPT 1/4", Brass



14-2549-016 Elbow, 90 degree, tube, 1/8 NPT to 1/16

14-2549-016 Elbow, 90 degree, tube, 1/8 NPT to 1/16

14-2658-050 Valve slider, 6-port, T Type

14-2682-000 Tenax TA, 60/80 mesh, 15g

14-2755-028 Power switch

14-2767-000 Cable, Cryo module to controlling instrument



14-2776-050 Cryogenic valve



14-2792-016 Nut, Plug, 1/16", Brass

14-2792-016 Nut, Plug, 1/16", Brass

14-2792-016 Nut, Plug, 1/16", Brass

14-2792-016 Nut, Plug, 1/16", Brass

14-2792-016 Nut, Plug, 1/16", Brass

14-2887-016 Assembly, sample mount, 1/2"x 1/16"

14-2931-016 Ferrule, 1/16", graphite/vespel

14-2950-016 Nut, 1/16", male, 1" long, SS

14-2950-116 Nut, Valco, 1" Long Gold Plated

14-2976-000

Interface, HP 5700 Series 5710/30/90 GC w/5970 MSD with Chemstation using

Quicksilver Software

14-2977-000 Sparger, 5ml fritted kit, 16 sets, for 1/2" mounts. Does not include purge lines.

14-2977-100 Sparger, 5ml fritted kit, 16 sets, for 3/4" mounts. Includes purge lines.

14-2978-000 Sparger, 25ml fritted kit, 16 sets, for 1/2" mounts. Does not include purge lines.

14-2978-100 Sparger, 25ml fritted kit, 16 sets, for 3/4" mounts. Includes purge lines.

14-2979-000 Sparger, 5ml fritless kit, 16 sets, for 1/2" mounts. Does not include purge lines.

14-2979-100 Sparger, 5ml fritless kit, 16 sets, for 3/4" mounts. Includes purge lines.

14-2980-000 Sparger, 25ml fritless kit, 16 sets, for 1/2" mounts. Does not include purge lines.

14-2980-100 Sparger, 25ml fritless kit, 16 sets, for 3/4" mounts. Includes purge lines.

14-2987-000 Tool, phillips screwdriver

14-2991-000 Interface, HP 5890 GC

14-2991-000 Interface, HP 5890 GC

14-2991-000 Interface, HP 5890 GC

14-2991-000 Interface, HP 5890 GC

14-2991-000 Interface, HP 5890 GC

14-2991-000 Interface, HP 5890 GC

14-2991-000 Interface, HP 5890 GC

14-2991-000 Interface, HP 5890 GC

14-2991-000 Interface, HP 5890 GC

14-2991-000 Interface, HP 5890 GC

14-2993-000 Interface, HP 5995/96/85/87/88/92 GC/MS with HP-1000/RTE GC/MS Software.








14-3027-000 6-port actuator, cable

14-3043-034 Fuse, 8.0 Amp (rectifier)

14-3071-016 Union, 1/16" gold-plated, Valco

14-3093-100 Sparger, 25ml fritless, kit

14-3094-100 Sparger, 5ml fritless, kit

14-3095-100 Sparger, 25ml fritted, kit

14-3096-100 Sparger, 5ml fritted, kit (included with 3100)

14-3098-016 Ferrule, 1/2", Teflon, Valco

14-3099-016 Reducing adapture 1/4 NPT-1/8 MPT

14-3100-016 Tee, 1/8 NPT

14-3100-074 3100 user manual

14-3100-KIT Kit box, 3100

14-3101-016 Hex, 1/8 NPT brass nipple

14-3101-016 Hex, 1/8 NPT brass nipple

14-3105-000 Power cord, Cryogenic valve



14-3105-186 Cryo valve cable assembly

14-3119-010 Nut, male, 1/16" for standard mount

14-3123-016 Ferrule, 1/16, Upchurch ETFE (081-042)







14-3124-016 Nut, Short, Blk, 1/16 Upchurch




14-3147-000

14-3147-000

14-3147-000

Interface, general purpose/HNU 301/321/421 (Valve driver option necessary from HNU.)



14-3147-000

14-3147-000

14-3147-000




Interface, general purpose/HNU 301/321/421 (Valve driver option necessary from HNU.) 14-3147-000

14-3147-000


Interface, general purpose/HNU 301/321/421 (Valve driver option necessary from HNU.) 14-3147-000

14-3147-000


14-3149-050 6-port valve body with rotor

14-3149-050 6-port valve body with rotor

14-3196-053 PEEK needle, sample, 25 ml, 9 1/8" long

14-3196-053 PEEK needle, sample, 25 ml, 9 1/8" long

14-3228-001 Screw, Thumb, 6-32 X 3/8 LG

14-3228-001 Screw, Thumb, 6-32 X 3/8 LG

14-3231-000 Power cord assembly

14-3233-000 Interface, Perkin-Elmer 8000 Series/Autosystem, Clarus.










14-3233-200 PE Clarus 500 Interface Cable







14-3295-016 Nut, 1/16", male, SS, Swagelok





14-3296-016 Nut, 1/16", SS, Swagelok, plug

14-3296-016 Nut, 1/16", SS, Swagelok, plug

14-3347-003 Trap, OV-1/Tenax, 12" x 1/8" (#7)

14-3347-003 Trap, OV-1/Tenax, 12" x 1/8" (#7)

14-3347-303 Trap, OV-1/Tenax (#7)

14-3347-403 Trap, OV-1. Tenax, #7 U Shape

14-3347-403 Trap, OV-1. Tenax, #7 U Shape

14-3354-016 Nut, 1/2" Knurled Swagelok



14-3404-016 Union, 1/16", SS w/o ferrules

14-3581-220 Mount heater, cartridge, 1/4", 120V (from S/N 88200001)

14-3595-053 Sample needle, 7.75", for 5ml frit/fritless sparger

14-3595-053 Sample needle, 7.75", for 5ml frit/fritless sparger

14-3595-253 Sample needle, 8.25", for 5ml frit/fritless sparger with a sample mount heater

14-3599-100 Sparger, 5ml needle, kit

14-3600-100 Sparger, 25ml needle, kit

14-3601-000 Sparger, 5ml needle kit, 16 sets, for 1/2" mounts

14-3602-000 Sparger, 25ml needle kit, 16 sets, for 1/2" mounts

14-3646-000 Thermocouple clip

14-3741-000

Set-up and familiarization of above equipment if installed at the same time.

Price determined by proximity to nearest service center.

14-3823-000 Septa, Low Bleed, 40ML, Sample Vial, 72/PK

14-3916-024 Vial kit, 40ml, pre-cleaned, 72 vials (including cap and septa)

14-3916-024 Vial kit, 40ml, pre-cleaned, 72 vials (including cap and septa)

14-3928-003 Trap, Carbo B/Carbo S (#8)



14-3928-403 Strat-Trap, Carbo B/Carbo S, (#8)

14-3928-403 Strat-Trap, Carbo B/Carbo S, (#8)

14-3938-000

External regulator assembly. Required when interfacing to any type of Mass

Selective Detector and a cryofocusing module. (Must bypass flow controller when using MSD) when flow rates are under 1ml/min.

14-3938-000

14-3938-000





14-3938-000



14-3938-000



14-3940-000 Pressure gauge, 0-30 psi


14-3979-016 Ferrule, reducing, 1/4"-1/16", teflon

14-4006-024 Sparger, 5mL frit w/ side arm (glassware only)





14-4006-124 Sparger kit, 5ml frit w/ side-arm, for 3100/3000/2000/HP7695

14-4006-224 Sparger kit, 5 ml frit w/ side-arm, Velocity XPT






14-4007-124 Sparger kit, 25ml frit w/ side-arm, for 3100/3000/2000/HP7695

14-4007-224 Sparger kit, 25 mL frit w/ side-arm, Velocity XPT



14-4024-010 Nut, 4-40 nylon locking

14-4045-003 Trap, GLT, Tenax (G1)

14-4045-003 Trap, GLT, Tenax (G1)

14-4045-303 Trap, glass-lined, Tenax (G1)

14-4046-003 Trap, GLT, Tenax/Silica gel (G2)

14-4046-003 Trap, GLT, Tenax/Silica gel (G2)

14-4046-303 Trap, glass-lined, Tenax/Silica gel(G2)

14-4047-003 Trap, GLT, Tenax/Silica gel/charcoal (G3)

14-4047-003 Trap, GLT, Tenax/Silica gel/charcoal (G3)

14-4047-303 Trap, glass-lined, Tenax/Silica gel/Charcoal (G3)

14-4048-079 Replacement inserts for 9 or 12ml vials (ea)

14-4048-079 Replacement inserts for 9 or 12ml vials (ea)

14-4050-016 Ferrule, 1/8 Fitt 1/8 Tube GVF





14-4083-026 Thermo couple probe (platen heater)

14-4092-000 6mm purge tube kit, 150mm long, 16 sets, for 3/4" mounts

14-4094-000 Disposable soil kit, 150mm long, 16 sets, for 3/4" mounts

14-4164-003 Trap, GLT, blank

14-4164-303 Trap, glass-lined blank (G0)

14-4188-086

Interface, HP 5890 w/5970 MSD and Unix or Pascal based software. Note:

This cable requires the HP A111 (HP P/N 05990-60111) or A211 (HP P/N

05990-60211) accessory card and internal accessory cable (HP P/N 05987-

60158) if using the Pascal software. If using Unix software the internal accessory cable (HP P/N 05987-60158) only is necessary.

14-4188-086

14-4188-086

14-4188-086













14-4188-086

14-4188-086

14-4188-086








60158) if using the Pascal software. If





14-4188-086




60158) if using the Pascal software. If If using Unix software the internal accessory cable (HP P/N 05987-60158) only is necessary.





14-4188-086

14-4188-086





14-4261-016 Cross, 1/8" Union Brass Aps.

14-4261-016 Cross, 1/8" Union Brass Aps.

14-4262-080 Clip, transfer line

14-4306-150 Valve, 6-port, actuator with boards

14-4311-120 Heater, 3/8" x 3" lg Assy, for platen

14-4314-200 Valve oven cover assembly

14-4323-000 Platen drive motor assembly, requires Rev E or newer motor control board

14-4323-200 Platen drive motor assembly with motor control board Rev D or older

14-4333-000 Instruction manual

14-4362-000 Installation kit for 2050W water bath

14-4362-000 Installation kit for 2050W water bath

14-4365-027 Insert removal tool for 9ml or 12ml insert

14-4366-001 Screw, 1/4" - 20 x 5, round head

14-4377-019 Fan, Assy (12 VDC) platen heater exchanger

14-4378-019 Fan, Assy (12 VDC) rear panel

14-4380-150 Valve, assy 2-port, vent, (12 VDC)

14-4381-050 Valve, pressure, 2-port, (12 VDC)

14-4383-028 Switch, Power, 10 AMP Filtered use Delta









14-4385-043

14-4385-043

Butyl rubber septa without teflon face. For 20mm top headspace vials, 125 per pack. Recommended for temperatures up to 100 degrees C. Color coded grey.


14-4385-043


14-4386-027 Jaw set, 20mm, crimp station



14-4400-074 7000 Headspace Service Manual

14-4400-217 Shipping carton with foam, 7000

14-4417-200 Shipping container, carrousel, 7000

14-4425-000 Index motor assembly, 7050, requires Rev E or newer motor control board

14-4425-200 Index motor assembly, 7050, with motor control board Rev D or older

14-4426-000 Rotational motor assembly, 7050, requires Rev E or newer motor control board

14-4426-200 Rotational motor assembly, 7050, with motor board Rev D or older

14-4436-000

Crimp Cap. For headspace septa and 20mm top headspace vials, 125 per pack.

14-4436-000

14-4436-000



14-4438-024 Vials, 9ml headspace, w/20mm top, 100 per pack. ** Requires insert for use**






14-4440-024 Vials, 22ml headspace, w/20mm top, 125 per pack.



14-4440-324

Vials, 22ml headspace, w/20mm top, for high temperature use (over 225C), 125 per pack. Included with instrument shipment.


14-4440-324

14-4440-324


14-4522-079 Carrousel collar for 9ml or 12ml vials

14-4568-079 Platen spacer, hold down

14-4570-000 Gauge, Assy pressure 0-30 PSI, 1/16" tube

14-4570-000 Gauge, Assy pressure 0-30 PSI, 1/16" tube

14-4572-000 Sample transfer line sheath, 60", replacement

14-4572-100 Transfer line, heater, 60" with nickel tubing

14-4576-019 Fan, box, 12 VDC, lower unit cooling

14-4602-016 Nut, 1/8", SS, Valco, for top of trap

14-4602-116 Nut, 1/8", SS, Valco Gold Plated

14-4602-116 Nut, 1/8", SS, Valco Gold Plated

14-4610-086

14-4610-086

14-4610-086

14-4610-086

14-4610-086

14-4610-086

Interface, Shimadzu GC 14A/15A/17A GC 14A w/QP 1000 EX MSD and GC

14A w/QP 2000 MSD, also includes 1/16" to 2mm unions, needs Shimadzu P/N

221-34280-91



221-34280-91



221-34280-91



221-34280-91



221-34280-91



221-34280-91

14-4610-086

14-4610-086

14-4610-086

14-4610-086

14-4610-186



221-34280-91



221-34280-91



221-34280-91



221-34280-91

Interface, Shimadzu GC 14A/15A/17A GC 14A wQP 1000 EX MSD and GC 14A w/QP 2000 MSD, needs Shimadzu P/N 221-34280-91

14-4610-186

14-4610-186

14-4610-186




Interface, Shimadzu GC 14A/15A/17A GC 14A wQP 1000 EX MSD and GC 14A w/QP 2000 MSD, needs Shimadzu P/N 221-34280-91 14-4610-186

14-4610-186


Interface, Shimadzu GC 14A/15A/17A GC 14A wQP 1000 EX MSD and GC 14A w/QP 2000 MSD, needs Shimadzu P/N 221-34280-91 14-4610-186

14-4610-186


14-4612-090 PCB, logic board

14-4613-090 PCB, motor control

14-4614-090 PCB, interface board

14-4615-090 PCB, power supply board

14-4616-090 PCB, mother board assembly

14-4617-090 Logic board assembly

14-4618-090 PCB, thermo couple cond.

14-4619-090 PCB, int. conn.board

14-4620-090 PCB, loader board

14-4621-090 PCB, mixer board

14-4622-090 PCB, sample board

14-4623-090 PCB, encoder

14-4625-090 PCB, carrousel index board (7050)

14-4632-000 Solenoid 12 VDC

14-4652-086

14-4652-086

14-4652-086

14-4652-086

14-4652-086

14-4652-086

Interface, HP 5890 w/5970 MSD and Unix-B or MS-DOS software, HP

5890/5971/5972 MSD and Unix-B or MS-DOS software and HP 5890/5989 MS

Engine



Engine



Engine



Engine



Engine



Engine

14-4652-086

14-4652-086

14-4652-086

14-4652-086



Engine



Engine



Engine



Engine

14-4661-079 Carrousel collar, 22ml vials

14-4674-080 Bracket, expansion slot cover

14-4695-016 Tee, 1/16" Brass

14-4695-016 Tee, 1/16" Brass

14-4695-016 Tee, 1/16" Brass

14-4695-016 Tee, 1/16" Brass

14-4738-028 Switch, interlock safety for trays

14-4793-029 Cable, 25 Cond. M/F (external cable)

14-4793-186 Interface cable, AQUATek 70 to 3000/3100

14-4814-000 LN(2) tank adapter kit




14-4815-026 TC, .06 x 6" Probe, 27.5

14-4824-116 Union, reducing 3/4" x 1/2"

14-4825-024 Sparger, 5ml fritless, for 3000/2000/HP7695 (glassware only)


14-4825-124 Sparger kit, 5ml fritless w/ side-arm, for 3100/3000/2000/HP7695

14-4825-224 Sparger kit, 5 ml fritless w/ side-arm, Velocity XPT



14-4826-124 Sparger kit, 25ml fritless w/ side-arm, for 3100/3000/2000/HP7695

14-4826-224 Sparger kit, 25 mL fritless w/ side-arm, Velocity XPT



14-4830-086 Interface, 2 HT3 to one HP 5890 (GC only).

14-4840-086 Cable, platen encoder board

14-4844-086 Cable, microprocessor

14-4845-027 Tool, wrench 1/4"-5/16"

14-4846-027 Tool, wrench 7/16"-1/2"

14-4847-027 Tool, 5/16" blade screwdriver

14-4863-027 Hand crimper for 20mm top headspace vials



14-4864-027 Tool, decapper 20mm neck



14-4865-027 Crimp station, 20mm top headspace vials. Includes 20mm jaw set



14-4866-027 Rack holder, vial, for 10 headspace vials



14-4869-067 Loop, sample, 500ul

14-4870-067 Loop, sample, 250ul

14-4871-027 Tool, nut driver

14-4872-075 ROM, with program 7000, Version 1.32

14-4883-067 Loop, sample, 100ul

14-4884-086 Cable, carrousel (internal ribbon cable)

14-4891-000 Dust cover assembly, 7050

14-4896-031 Knob, clamp (for 50 position deck 7050)

14-4897-050 Regulator, Pressure, with 1/8" Elbow Fittings, 100 psi max

14-4900-000 Vent restrictor assembly

14-4900-167 Internal vent restrictor assembly

14-4913-153 Septum needle adapter kit, Varian 1040/1041 packed injection port

14-4913-153 Septum needle adapter kit, Varian 1040/1041 packed injection port

14-4913-253 Septum needle adapter kit, HP 5890A, 6890, capillary injection port

14-4913-253 Septum needle adapter kit, HP 5890A, 6890, capillary injection port

14-4913-353 Septum needle adapter kit, HP 5880A, 5890A and 6890 packed injection port

14-4913-453 Septum needle adapter kit, Varian SPI 1075/1077 and Tracor 540 injection ports

14-4913-453 Septum needle adapter kit, Varian SPI 1075/1077 and Tracor 540 injection ports

14-4913-553

Septum needle adapter kit, Perkin Elmer, all Sigma Series, all 8000 Series, and autosystem injection ports

14-4913-553

Septum needle adapter kit, Perkin Elmer, all Sigma Series, all 8000 Series, and autosystem injection ports

14-4913-653 Septum needle adaptor kit, Shimadzu 9A, 14A and 17A packed injection ports

14-4919-267 Silco coated sample loop, 2 ml

14-4924-067 Loop, sample, 1ml

14-4924-267 Silco coated sample loop, 1 ml

14-4925-050

Flow element, 1-10 cc/min. For precise regulation of .1-.32 I.D. Capillary column flow rates. Installed in instrument vial needle flow controller. Color coded blue. (Recommended for use with septum needle adapter operated in the capillary splitless mode or cap-on-column mode.)

14-4926-050

Flow element, 6-60 cc/min. For precise regulation of 1/8" - 1/4" packed column flow rates. Installed in transfer line flow controller. Color coded red.

(Recommended for use with septum needle adapter operations with packed inlet port and packed injectors with mega bore column.)

Flow element, 40-400 cc/min. Color coded black. (Recommended for use in applications with high (>100 cc/min) standby flows.) 14-4928-050

14-4936-050

Flow element, 0-25 cc/min. For precise regulation of .53-.75 I.D. Capillary column flow rates. Color coded red with silver dot.

14-4938-086 Interface, Carlo Erba Mega and Vega Series/Fisons 8000










14-4939-303 Trap, glass-lined, 1/8" Tenax/Charcoal


14-4944-167 Polar sample loop, 2ml



14-4957-138 Transformer Assy (220V)

14-4957-238 Transformer assy, 220V-110V

14-4958-086 Cable, power module to interconnect board

14-4960-034 8 amp fuse, 250V, GDB, 5 x 20 mm

14-4961-034 4.0 amp fuse, 5 x 20 mm, 230V

14-4961-034 4.0 amp fuse, 5 x 20 mm, 230V

14-4966-090 PCB, BCD interface board

14-4974-050 Flow controller, 0-60cc/min.

14-4983-253 Needle, 19 GA, 2.527 Lg, Silco coated

14-5009-043 Septum replacement, septum needle adapter, 5 ea

14-5019-100 Disposable soil kit, 150mm long, 16 sets, 1/2" to 3/4" adapter for 1/2" mount

14-5020-027 Crimp station, air powered



14-5026-050 Pressure regulator valve, 1/16" fitting, 0-60 psi



14-5028-039 220V Power Cable

14-5028-039 220V Power Cable

14-5028-039 220V Power Cable

14-5028-039 220V Power Cable

14-5028-039 220V Power Cable

14-5036-010 Septum nut, HP 5890A capillary injection port

14-5036-110 Septum nut, HP 5890A packed injection port

14-5045-000

14-5083-000

14-5092-100

14-5092-200

Variable Injection Pressure Regulator (VIPR). Controls injection pressure for enhanced sensitivity.

Insert kit for using 9 or 12ml vials. Includes 12 inserts, carrousel collar and insert removal tool.

Installation kit, Tekmar 3100/3000. Includes 5ml syringe with luer, 10ul syringe, and a 3/8" wrench.

Installation Kit, Includes 5ml syringe with luer, 10 ul syringe and sample mount wrench.

14-5093-000

Installation kit. Includes 40-400cc/min flow element, 1/8" - 1/16" reducing union, five feet 1/16" nickel tubing, nine feet 1/8" copper tubing, 1/16" stainless steel union, 1/8" brass tee, 1/8" brass union, vial crimper, five 1/2" wire ties, and special tools for installation.

14-5107-086 RS232 Cable Assembly (included with unit)









14-5107-186 RS232 interface cable, 12 ft. (9 pin to 9 pin) for 7000

14-5118-100 Solvent flush kit, 3000/3100

14-5119-100 Test tube adapter, soil sampler kit, 1/2" - 3/4", single position, 1/2"

14-5162-000 Mixer elevator assembly, requires Rev E or newer motor control board

14-5162-200 Mixer elevator assembly with motor control board Rev D or older

14-5167-000 Elevator sampler assembly, requires Rev E or newer motor control board

14-5167-200 Elevator sampler assembly with motor control board Rev D or older

14-5175-000 Elevator loader assembly, requires Rev E or newer motor control board

14-5175-200 Elevator loader assembly with motor control board Rev D or older

14-5177-138 Transformer assembly (100v)

14-5177-238 Transformer assy, 100V-110V

14-5180-034 Fuse, 10A, 250V, 5x20mm, Slow Blow





14-5186-053 Soil needle, 7.75", for 5ml needle sparger

14-5186-353

Soil needle, 9.50", for 20/25ml needle sparger on 2016 and for disposable sample tubes configured with 1/2" mounts and 3/4" adapters.

14-5186-453 Soil needle, 10.25", for 20/25ml needle sparger

14-5194-016 Bulkhead, 1/8"-1/8", tube stub, SS

14-5229-002 Tubing, 1/16", nickel, large bore, (price/foot), 10ft lengths (purge side)



14-5233-090 Micro controller

14-5233-090 Micro controller

14-5235-090 Communications/interface board

14-5235-090 Communications/interface board

14-5258-016 Ferrule, 0.6-0.8mm O.D. adapter, fused silica

14-5258-016 Ferrule, 0.6-0.8mm O.D. adapter, fused silica

14-5259-016 Ferrule, 0.5mm O.D., adapter, fused silica

14-5259-016 Ferrule, 0.5mm O.D., adapter, fused silica

14-5260-700 Terminal kit, soft key hand-held, Via RS232

14-5270-000

Sparger, 20ml needle kit, 16 sets, for use with silicone tube heater, for 1/2" mounts

14-5284-290 Memory board

14-5285-367 Loop, MCS, 600-650ul SilcoSteel

14-5291-038 Transformer, 115V

14-5293-020 Cryotrap heater assembly, internal

14-5297-191 Panel display, front, LCD

14-5298-050 Valve assembly w/actuator, 6-port

14-5298-150 Actuator 6-port valve 3000/3100/6000

14-5299-120 Heater assembly, bottom

14-5302-016 Bulkhead elbow, 1/8" - 1/16", SS

14-5302-016 Bulkhead elbow, 1/8" - 1/16", SS

14-5302-116 Bulkhead, 1/8" - 1/16" Silcosteel®

14-5307-120 Transfer line assembly, heated, (72")

14-5311-080 Expansion slot cover

14-5312-090 Interconnect board

14-5315-090 Thermocouple board

14-5315-190 Thermocouple board

14-5329-090

PCB, Autosampler Logic Board for 3000/3100/6000. This card is required if a

3000/3100/6000 unit is going to be interfaced to a 2016/2032/6016/6032

Autosampler that was previously installed to a 2000 system.

14-5329-090

14-5330-090

14-5330-090

14-5330-090

PCB, Autosampler Logic Board for 3000/3100/6000. This card is required if a

3000/3100/6000 unit is going to be interfaced to a 2016/2032/6016/6032

Autosampler that was previously installed to a 2000 system.

PCB, Cryofocusing Logic Board for 3000/3100/6000/ACAN. This card is required if a 3000/3100/6000 unit is going to be interfaced to a Cryofocusing

Module (NOTE: If the Cryofocusing Module is prior to serial number 91046014 contact Technical Support to confirm proper configuration) that was previously installed to a 2000/7000 system.





14-5330-190 PC board assy, Cryo card w/split valve (for 14-ACAN-000 and 14-ACAN-200)

14-5386-016 Fitting, sample mount, unheated 1/2"

14-5386-016 Fitting, sample mount, unheated 1/2"

14-5389-019 Fan guard

14-5393-490

3100 Memory Card required for 3100 (with ROM Version 5.16 or less) for

SOLATek 72/AQUATek 70 Installations

14-5397-086 Interface, two Tekmars on one Perkin-Elmer 8000 Series/Autosystem







14-5408-050

0-144 cc/min flow element. Color coded silver w/red dot. (Recommended for use when GC pneumatics are regulating carrier flow to the column or with septum needle adapter in the capillary split mode.)

14-5439-080 Display cover, front panel

14-5484-034 Fuse, 8 amp, 5 x 20mm, 250 V, Type T

14-5484-034 Fuse, 8 amp, 5 x 20mm, 250 V, Type T

14-5514-080 Tee locater bracket

14-5522-050 Flow controller, 0-100 cc/min.

14-5522-150 Flow controller, 1/8" fittings, 0-100 mL/min

14-5524-219 Fan assembly

14-5524-319 Fan assembly, 3 1/8" SQ 11" leads

14-5525-019 Blower assembly

14-5526-150 Valve assembly drain, 12VDC, 1/8" fittings

14-5527-050 Bypass valve, sample

14-5528-086 Cable for hand-held controller

14-5529-050 Gas valve, sweep

14-5530-050 Vent valve

14-5531-000

E-form option kit. Recommended for VOCs in water/soil analysis. Includes tubing and fittings for transfer line, sample pathway, 1ml E-form sample loop and E-slider for six port valve.

14-5540-002 Electroform tubing, 0.06" OD, 0.04" ID (per foot)

14-5541-167 E-form sample loop 1ml

14-5542-167 E-form sample loop 2ml

14-5544-167 E-form sample loop 250ul

14-5545-167 E-form sample loop kit, 500ul

14-5555-026 Thermocouple, type K 16" (oven)

14-5558-086 Cable, 6 pin modular, coiled

14-5573-050 Rotor, E-type, for 6-port valve

14-5606-167

E-form sample loop kit, 250ul, 500ul, 2ml. For use with pharmaceutical & environmental samples.

14-5624-016 Ferrule, 1/4" to 1/8" reducing

14-5624-016 Ferrule, 1/4" to 1/8" reducing

14-5634-100 TC extension, trap 25"

14-5634-200 TC extension, BOT 13"

14-5634-300 TC extension, trap 25"

14-5634-500 Cable display, 21"

14-5634-600 Wiring kit, main, 110V

14-5634-700 Power lead, trap 25"

14-5653-367 Loop, MCS, 450-500ml, SilcoSteel

14-5654-120 MCS heater assembly

14-5654-220 MCS heater assembly(220V)

14-5661-016 Pencil Filter, Filter Flow Module



14-5663-016 Ferrule, 1/16", teflon, 1 piece (for needle in mount)

14-5663-016 Ferrule, 1/16", teflon, 1 piece (for needle in mount)

14-5665-034 Fuse, Slow Blow, 5AMP, 250V, 5 X 20 MM





14-5675-150 Assembly, pressure regulator, 3100

14-5681-102 Purge line assembly

14-5682-202 Drain line assembly, 3100

14-5684-000 Sample valve, 3-port assembly

14-5685-016 Union, 1/16" brass

14-5686-016 Bulkhead, 1/8"-1/16" SS, with filter

14-5686-116 Top of trap fitting, nickel plated

14-5686-216 Top of trap fitting, silcosteel® coated

14-5687-020 Cartridge heater, valve oven

14-5687-020 Cartridge heater, valve oven

14-5691-079 Valve oven plate

14-5716-050 Valve, assembly, HRP 12 VDC

14-5717-020 Heater assembly, trap

14-5717-120 Heater assembly, TURBOCool trap, 3000/3100

14-5718-020 Heater assembly, bottom of trap

14-5731-076

14-5732-076

TekLink 7000 Instrument Control Software w/o ROM. Includes TekLink 7000 software, (1) 3.5" diskette, 12 ft. (9 pin to 9 pin) RS232 cable, 9 pin to 25 pin cable adapter and instruction manual.

TekLink 7000 Instrument Control Software with ROM upgrade. Includes

TekLink 7000 software, (1) 3.5" diskette and (1) 5.25" floppy, 12 ft. (9 pin to 9 pin) RS232 cable, 9 pin to 25 pin cable adapter, latest version 7000 ROM and instruction manual.

14-5736-000 Heater, pocket, automatic assembly, 1 pos. (for 3100/3000)

14-5736-100 Heater, tube, automatic assembly, 1 pos. (for 3100/3000)

14-5737-020 Pocket heater (spare part)

14-5737-120 Tube heater (spare part)

14-5740-058 Output module

14-5745-090

14-5745-090

Serial port expansion board for PC (required if your computer has no available serial ports)


14-5745-090


14-5745-090


14-5747-035 Gender adapter, 9 pin male to 25 pin female

14-5747-035 Gender adapter, 9 pin male to 25 pin female

14-5749-090 Output board/power (must have ROM 2.0 or greater)

14-5757-034 Fuse, 4amp, sub-min, fast for output module

14-5757-034 Fuse, 4amp, sub-min, fast for output module

14-5773-016 Ferrule, 1/8", Gold Plated for Top of Trap

14-5773-016 Ferrule, 1/8", Gold Plated for Top of Trap

14-5778-050 Valve, needle (TPC) 1/16" tube

14-5779-026 Oven thermocouple, .062 DIA x 38" long

14-5779-026 Oven thermocouple, .062 DIA x 38" long

14-5803-090 Power supply board, 70W

14-5813-234 Fuse, 10 amp

14-5818-043

Silicon rubber/teflon face septa. For 20mm top headspace vials, 125 per pack.

Included with instrument shipment. (Recommended for temperatures over 100 degrees C. Color coded tan.)


Included with instrument shipment. (Recommended for temperatures over 100 degrees C. Color coded tan.) 14-5818-043

14-5818-043


Included with instrument shipment. (Recommended for temperatures over 100 degrees C. Color coded tan.)

14-5833-190 Pressure transducer assembly

14-5864-003 Trap, VOCARB 3000

14-5864-003 Trap, VOCARB 3000

14-5864-303 Trap, VOCARB 3000™

14-5864-403 Strat-Trap, Vocarb 3000


14-5865-003 Trap, VOCARB 4000

14-5865-003 Trap, VOCARB 4000

14-5865-303 Trap, VOCARB 4000™



14-5866-003 Trap, BTEX

14-5866-003 Trap, BTEX

14-5866-303 Trap, BTEX™

14-5866-403 Strat-Trap, BTEX

14-5866-403 Strat-Trap, BTEX

14-5869-002 Support tube, fused silica transfer line 2.5"lg

14-5882-034 Fuse, 2 pico amp

14-5957-050 Mass flow controller assembly

14-5959-100

3100 desorber kit, 7" x 1/4", for stainless steel traps 7" long by 1/4" O.D.

stainless steel traps. Includes trap heater, two blank traps, and adapters for installation in Tekmar 3100. (See AEROTrap 6000 spare parts price list for additional 1/4" sample tubes). Need (2) additional 6mm ferrules

(P/N 14-4482-016) to work with 6mm O.D. sample tubes.

14-5977-086 Cable, mass flow controller to data acquisition system

14-6000-217 Shipping carton with foam, M3000/3100/6000

14-6011-102 MCS jumper, Silcosteel®, with fittings, 3000

14-6011-302 MCS jumper, Silcosteel®, with fittings, 3100

14-6058-002

14-6058-102

Polar option kit with 1ml loop. Recommended for alcohol, sulfur, nitrogen and phosphorous compounds only. Includes loop, sample path tubing, fittings, transfer line tubing, E-valve rotor.

Polar option kit with 1/2ml loop. Recommended for alcohol, sulfur, nitrogen and phosphorous compounds only. Includes loop, sample path tubing, fittings, transfer line tubing, E-valve rotor.

Silcosteel option kit with 1 ml loop. Recommended for polar and nonpolar compounds. Includes loop, sample path tubing, fittings, large bore transfer line tubing, and E-valve rotor.

14-6058-702

14-6058-802

Silcosteel option kit with 2 ml loop. Recommended for polar and nonpolar compounds. Includes loop, sample path tubing, fittings, large bore transfer line tubing, and E-valve rotor.

14-6085-002

14-6085-002

Silco Steel .02" ID transfer line (price/foot) (Requires also (2) of P/N 14-0241-

016.)

Silco Steel .02" ID transfer line (price/foot) (Requires also (2) of P/N 14-0241-

016.)

14-6104-002 Tubing, transfer line, Silcosteel (per foot), .040 x 1/16"





14-6106-090 Power board assembly, 120V



14-6107-090 Control board, Cryo

14-6107-090 Control board, Cryo

14-6108-100 Sample mount heater kit

14-6108-120 Heated Silcosteel® sample mount

14-6108-120 Heated Silcosteel® sample mount

14-6150-024 Standard vessel with UV coating, 0.330" ID

14-6150-024 Standard vessel with UV coating, 0.330" ID

14-6154-350 6 port control box only

14-6216-016 Fitting, Union, 1/16", 4-way

14-6216-216 Union, 5 way

14-6216-316 Fitting, union, 1/16", Silcosteel® 4-way



14-6255-100 Power supply, single output, 24VDC, 4A, after S/N US01214008

14-6255-200 Power supply, single output, 24 VDC, 4A, after S/N US01214008

14-6292-350 Controller Box, Valve, 6 Port, Velocity

14-6292-350 Controller Box, Valve, 6 Port, Velocity

14-6412-016 Nut, male, stainless steel, 1/16", 1.5" long, SS

14-6412-016 Nut, male, stainless steel, 1/16", 1.5" long, SS

14-6417-002 Tygon tubing, 5/16" OD, 3/16" ID (per foot)

14-6453-034 Fuse 4.0A, 5X20 MM T-4.0

14-6520-074 Cryofocusing Module instruction manual

14-6520-074 Cryofocusing Module instruction manual

14-6520-600 Cryofocusing Module, 115V

14-6544-019 Fan guard

14-6545-019 Fan, 12 VDC, 5.4 CFM

14-6551-006 Standoff, nylon, 6-32 - snap on

14-6555-020

14-6555-020

Union heater assembly, does not include nuts & ferrules for transfer line or column.

Union heater assembly, does not include nuts & ferrules for transfer line or column.

14-6556-004 Insulation, union base and cover

14-6558-028 Switch, 6 amp circuit breaker

14-6560-000 Power entry module with EMI filter

14-6566-082 HP 5890 GC mounting bracket

14-6567-001 Screw, M4 x 0.7 x 8 mm

14-6577-002 Pressure gauge tubing, 0.062" OD, 0.040" ID, 6" long

14-6577-002 Pressure gauge tubing, 0.062" OD, 0.040" ID, 6" long

14-6578-010 Nut

14-6579-043 O-ring .250OD

14-6650-220 Transfer Line heater, 100-115 VAC, 72" long

14-6650-320 Transferline heater Assy, 72" long, 230V

14-6689-086 Interface, HP 6850, 6890, 7890 GC

14-6689-086 Interface, HP 6850, 6890, 7890 GC

14-6689-086 Interface, HP 6850, 6890, 7890 GC

14-6689-086 Interface, HP 6850, 6890, 7890 GC

14-6689-086 Interface, HP 6850, 6890, 7890 GC

14-6689-086 Interface, HP 6850, 6890, 7890 GC

14-6689-086 Interface, HP 6850, 6890, 7890 GC

14-6689-086 Interface, HP 6850, 6890, 7890 GC

14-6689-086 Interface, HP 6850, 6890, 7890 GC

14-6689-186

Interface, HP 6890 GC connected to MSD (Please note that all dip switches need to be up)

14-6712-016 Union, bulkhead, brass, 1/8"-1/6"

14-6747-050 Valco valve, 16-port

14-6747-150 Motor, 16 pos, Valco, AUTOCan

14-6747-250 Valve body & rotor, 16 port

14-6747-350 Rotor, 16 port valve, AUTOCan

14-6748-050 Valco valve, 8-port

14-6748-150 Motor, 8 pos, Valco, AUTOCan

14-6748-250 Valve body with slider 8 port


14-6750-050 Valve, 6-port, .030 ports, 24V

14-6750-150 6-port Valve Actuator

14-6750-250 6 port valve body with slider


14-6751-020 Heated transfer line assembly

14-6752-020 Manifold assembly, left

14-6752-120 Manifold assembly, right

14-6752-420 Manifold, Lft, Siltek Before SN US06332

14-6752-520 Manifold, Rt, Siltek before SN US06332

14-6754-016 Union, bulkhead, 1/16" tower

14-6755-120 Cartridge heater oven assembly

14-6760-080 Canister support rack

14-6762-011 Leg leveler

14-6764-016 Fitting, 1/4"-1/16"

14-6765-003 Trap, 6", Carbopack B, 1/8"

14-6765-103 Tenax, 6" trap

14-6765-203 Carbo pack B trap, Carbosieve S III 1/8" x 6"

14-6765-303 Blank, 6" trap

14-6766-090 Output control board

14-6767-090 PCB assembly, Thermocouple

14-6780-000 Power supply assembly

14-6783-050 Pressure lock valve assembly

14-6783-050 Pressure lock valve assembly

14-6784-050 Line sweep valve assembly

14-6785-050 Line backflush valve assembly

14-6795-094 Molded cap tower

14-6805-090 Indicator panel assembly

14-6805-190 Status panel assembly

14-6810-002 Connection line assembly

14-6810-302 Assy, Line, After S/N US06332009

14-6811-094 End cap

14-6826-086 Cable assembly, indicator panel

14-6826-086 Cable assembly, indicator panel

14-6827-086 Cable assembly, pressure transducer

14-6828-086 Internal Cryo bracket to board cable assembly

14-6829-086 Cable assembly, mass flow controller

14-6855-000 Screw cap for 40ml vial, pkg of 24

14-6893-302 IS Restrictor loop w/ fittings (Solatek)

14-6893-402 IS flow restrictor, with fittings, Aquatek 70's after s/n US01312002

14-6893-502 IS flow restrictor, with fittings, Aquatek 70's before s/n US01312002

14-6916-020 Sample transfer heater

14-6924-019 Cooling fan assembly

14-6925-019 MCS fan assembly

14-6929-002 ISTD Can lines

14-6929-202 Lines, ISTD, Siltek After S/N US06332009

14-6929-302 Lines, ISTD, Siltek After S/N US06332009

14-6934-002 PEEK Tubing, 1/16" OD, Natural (per foot)







14-6938-020 Trap heater assembly

14-6938-085 6-Port oven cover

14-6940-019 Fan guard

14-6945-085 Multiport valve, oven cover

14-7037-016 1/8" Flangless nut

14-7037-016 1/8" Flangless nut

14-7038-016 Bushing, Exit, 1/8" Tefzel, Short




14-7081-050 Backflush valve

14-7105-086 Cable, host, RS 232

14-7200-074 User Manual, SOLATek 72

14-7200-217 Shipping container-SOLATek 72

14-7200-kit SOLATek kit box

14-7201-009 Washer, TEFLON

14-7201-009 Washer, TEFLON

14-7293-052 25ml sample syringe

14-7333-150 Assy, 3-way, drain valve

14-7333-250 Assy, 3-way, sample valve

14-7333-350 Assy, 3-way pressurize valve

14-7333-450 Assy, 3-way, transfer valve




14-7344-450 4-Port Syringe Valve, Ceramic w/ Fittings

14-7396-086 Interface, Varian 3800/3900









14-7397-086 Trace 2000/Trace GC Ultra Interface cable w/ 1/16" to 2mm unions










14-7397-186 Trace 2000/Trace GC Ultra Interface cable










14-7410-002

Small O.D. Silcosteel Tubing for transfer line, 0.021 x 0.029, (requires 14-7511-

016 graphite vespel ferrules for installation)

14-7418-080 Foil backing, septa (pack of 125), required for high temperature vials.



14-7433-090 Assy, valve control board

14-7433-190 Assy, valve control board, 220V

14-7434-090 AQUATek 70 interface board. Required for all 3000's and 3100's

14-7482-053 AQUATek 70 Needle

14-7483-050 Valve, 4-port Hamilton valve (2ul)

14-7483-128 Assy, wiring harness, switch control

14-7483-150 Assy, 4-port Hamilton valve, 100V

14-7483-250 Assy, 4-port Hamilton valve, 220V

14-7486-086 Assy, wiring harness (AC)

14-7486-186 Assy, wiring harness (DC)

14-7487-086 Assy, wiring harness, heat control board

14-7487-090 Assy, heat control board

14-7488-120 Assy, water resv/htrs, 100/120Volts

14-7488-220 Assy, water resv/htrs, 220 volts

14-7491-067 5 ml sample loop, Teflon, AQUATek 70

14-7491-167 25 ml sample loop,Teflon, AQUATek 70



14-7494-157 Assy, LED, square .370 x .270, yellow

14-7500-016 1/8"-1/16" Teflon reducing ferrule

14-7510-102 Pre-column, Glass bead packed

14-7511-016

14-7511-016

1.25 mm, 1/16" body graphite vespel ferrule, (ferrule used with the 14-7410-002 tubing)

1.25 mm, 1/16" body graphite vespel ferrule, (ferrule used with the 14-7410-002 tubing)

14-7514-001 Plug, Flat Point Nylon, 1/4-28 X 1/4" LG

14-7518-016 Union, 1/16-1/16, flow restrictor, 500cc

14-7520-128 Assy, pressure switch, 1/8 NPT, 10-100psi, hot water tank

14-7520-128 Assy, pressure switch, 1/8 NPT, 10-100psi, hot water tank

14-7533-086 Assy, cable 25 pin, female

14-7534-086 Assy, cable, 9 pin, male

14-7558-034 Fuse, 1.0A, 5x20mm, time display

14-7603-050 Valve, 3-way toggle

14-7630-002 Tubing, 1/8" OD, Red, Translucent (per inch)




14-7633-002 Tubing, 1/8" OD, Yellow, Translucent (per inch)

14-7634-002 Tubing, 1/8" OD, Blue, Translucent (per inch)





14-7644-000

SOLATek 72/AQUATek 70 external tap rinse kit. Includes activated carbon filter, fittings, copper tubing, saddle valve and pressure regulator assembly.

14-7645-000

SOLATek 72/AQUATek 70 rinse water reservoir kit. Includes 5 liter reservoir, activated carbon filter, copper tubing and fittings.

14-7656-000 Activated carbon filter assembly, blank water

14-7664-100 Pressurized Reservoir

14-7671-016 Ferrule, Super Flangeless, 1/16", PEEK





14-7682-051 Solid State Relay, 240 VAC, 25A, 0 Volt

14-7685-016 1/16" to 1/16" Valco, zero dead volume union

14-7686-016 1/16" to 1/32" adapter fitting for 1/32" tubing installation to the 6-port

14-7695-016 Nut, PEEK, Natural for 1/16" OD Tubing





14-7715-024 Amber vial kit 40 ml, precleaned 72 vials (including cap and septa).

14-7748-086 RS232 interface cable, 25 pin to 9 pin

14-7806-000 Assy, RTD (24") Temp Sensor for Soil Valve, Mount





14-7806-026 RTD assy, 1000 ohms, 0.125 X 1 LG., 24" leads (no connector) for cup

14-7806-100 Assy, RTD (28") Temp Sensor for Sample Heater

14-7806-200 Assy, RTD (34") Temp Sensor for Heated Water Resovoir

14-7824-280 Needle guard

14-7835-090 Temperature Control Board




14-7836-190 Motor Control Board

14-7837-090 Microprocessor (CPU) Board

14-7837-190 Microprocessor (CPU) Board

14-7837-590 Microprocessor (CPU) Board for Stratum

14-7837-690 CPU Board (for use with Stratum)



14-7838-190 Valve Control Board

14-7877-200 Robotic Arm Assembly w/ US Digital Encoders, s/n before US06349001

14-7882-179 Needle Mount Block

14-7887-279 Vial Tray 1-36

14-7888-279 Vial Tray 37-72

14-7890-053 Stainless steel needle, 3 stage

14-7916-000 Assy, Chiller, SOLATek 72 (does not include recirculating bath)

14-7946-179 Needle Gasket (rubber boot for needle)

14-7956-000 Geared elevator belt

14-7957-179 Calibration pad, tray

14-7958-179 Calibration pod, gripper

14-7977-000 Stepper motor assembly, mixer with screws

14-8001-086 AC input power cable

14-8002-086 DC power cable

14-8002-186 Cable, Assembly, DC Power Harness

14-8002-186 Cable, Assembly, DC Power Harness

14-8003-086 24 VDC power cable

14-8003-186 Cable, Assembly, 24 VDC.

14-8004-086 Modular CPU to Valve cable

14-8004-186 CPU to Valve Board cable, 24"

14-8004-286 CPU to Valve board cable, 10"

14-8004-386 Cable, Assembly, 6 lead Telephone line.

14-8005-086 IS valve ribbon cable, 20 pin

14-8006-086 IS valve ribbon cable, 30 pin

14-8007-186 Pumper power and signal cable (blue pumper)

14-8010-086 Cable assy, elevator sensors

14-8011-086 X encoder cable, for Red Encoder

14-8013-086 X motor cable

14-8014-086 Elevator motor cable

14-8017-086 AC to Solid State relay board cable

14-8018-086 Motor harness cable

14-8019-086 Elevator coil cable

14-8020-086 Temp to Solid State relay board cable

14-8020-086 Temp to Solid State relay board cable

14-8020-186 Cable Assy, Temp to SS relay ribbon

14-8021-086 Display cable

14-8031-090 Internal Standard Interconnect Board

14-8080-079 Calibration disk, elevator cup

14-8081-079 Flag, gripper sensor

14-8084-100 Elevator assembly (includes mixer motor)

14-8089-000 CPU display board (w/ ROM), Ver. 2.2

14-8089-075 ROM, with program 7000, Ver. 2.2

14-8089-090 CPU display board (w/o ROM)

14-8094-005 Gripper Liner

14-8094-200 Gripper Assembly

14-8105-120 Assy, Water reservoir/heaters, 110 V

14-8105-320 Assy, Water Reservoir/Heater 110V

14-8105-420 Assy, Water Reservoir/Heater 220V

14-8129-300 Sample Cup, Vial Mixing Assembly

14-8131-054 Spring, SS, 2.375 x .380 x .031TH (for stripper tab)

14-8142-026 Switch, cutout, elevator sideswitch

14-8143-000 X drive timing belt 75 pitch

14-8144-000 Belt, 4"ID, mixing hub

14-8147-000 IS assy, (including motors and valves)

14-8149-179 Sensor Flag, IS Assembly

14-8155-043 O-ring, Encoder (Dynapar)

14-8159-000 Assy, fan, 24 VDC

14-8163-000 Assy, IS motor (motor and connector only)

14-8191-000 Assy, lighted display

14-8191-000 Assy, lighted display

14-8196-079 Gripper shroud

14-8197-016 Fitting, Bulkhead, barbed, 0.25 ID tube

14-8235-000 Assy, cartridge heater, 115 VAC

14-8238-000 Assy, cartridge heater, 220V

14-8239-000 24 VDC, Gripper Motor Assembly (motor and connector only)

14-8240-000 Gripper, optical sensor

14-8241-000 Elevator, optical sensor

14-8250-000 Elevator motor assembly, 24 VDC, (motor and connector only)

14-8254-043 O-ring, 3-stage needle

14-8279-000 Assy, cartridge heater, mixing cup, 115 VAC

14-8280-000 Assy, cartridge heater, mixing cup, 220V

14-8311-050 Valve, 4-way IS, (Hamilton), 5 µL

14-8312-090 Power Supply, triple out, +5/+15/-15 VDC



14-8313-190 Power Supply, 24 VDC, 300W-Solatek Only

14-8313-190 Power Supply, 24 VDC, 300W-Solatek Only

14-8317-000 Valve, high-temperature 3-port, 24 VDC, soil valve

14-8317-100 Solid Valve Assy, Atomx

14-8318-150 3-port Series 66 Valve, 24 VDC

14-8318-150 3-port Series 66 Valve, 24 VDC

14-8319-052 250 µL dilution syringe

14-8354-000 Cryofocus trap heater assembly

14-8354-000 Cryofocus trap heater assembly

14-8389-157 Power/error LED assy (red square)

14-8390-086 Cable assy, SOLATek 72 to 3000/3100/XPT/Stratum

14-8391-000 Thermal fuse assembly

14-8391-000 Thermal fuse assembly

14-8414-016 Quick disconnect body (reservoir lid side)

14-8415-016 Quick disconnect STE ( tubing side)

14-8417-000

14-8417-000

Duet™ High Throughput Interface. Interfaces two Teledyne Tekmar VOC systems with any GC or GC/MS system.


14-8417-000


Duet High Throughput Interface. Interfaces two Teledyne Tekmar PTCs with any GC or GC/MS system.

14-8417-200

14-8417-200

Duet High Throughput Interface. Interfaces two Teledyne Tekmar PTCs with any GC or GC/MS system.

14-8425-086 Cable assy, Series 66 3-way valve, vent

14-8425-186 Cable assy, Series 66 3-way valve, transfer

14-8425-286 Cable assy, Series 66 3-way valve, water

14-8425-386 Cable assy, Series 66 3-way valve, sweep

14-8429-000 Sample tray (1-36), before US02315001, for All units w/ chillers

14-8430-000 Sample tray (37-72), before US02315001, for all units w/ chillers

14-8439-179 5-port Syringe Stem

14-8440-179 4-port syringe stem

14-8455-047 Timing Belt, syringe drive pumper

14-8465-002 Tubing, PEEK, 1/8" OD, interconnect 4-port to 250 µL syringe

14-8465-102 Tubing, PEEK, 1/8" OD, interconnect 5-port to Needle

14-8466-086 Assy, cup ground wire

14-8470-016 Plug Nut, 1/4-28, Tefzel, Flat Bottom





14-8477-086 Cable assy, SOLATek 72 to 2000

14-8477-186 Cable assy, SOLATek 72 to "Other concentrator"

14-8477-286 Cable, Archon-Tekmar Interface



14-8505-086 Encoder cable assembly, syringe drive pumper

14-8541-000 Pumper bracket retrofit kit when replacing old style "black" pumper

Soil line w/ fittings, SOLATek, spare part only, 1/16" Silcosteel, needle to soil

14-8542-000 valve

14-8558-000 Drain Line Kit, SOLATek 72

14-8558-002 Drain Tubing (per foot)

14-8562-016 Nylon tube fitting (for bottom of sample cup)

14-8563-005 O-Ring for Rinse Reservoir

14-8580-067 5 ml sample loop, Peek, AQUATek 70




14-8588-100 4-port syringe drive assembly, pumper only

14-8589-100 5-port syringe drive assembly, pumper only

14-8595-002 Tubing, 1/8", Peek, (per foot)

14-8595-002 Tubing, 1/8", Peek, (per foot)

14-8596-079 Vial Mixing Cup Assembly

14-8610-101 Syringe plunger mounting screw, 8-32 shoulder screw, 5-port

14-8632-073 Clamp, Water Heater

14-8641-067 Loop, 5ml, Silcosteel

14-8659-016 Nut, Flangless, Short, 1/8, Peek

14-8659-016 Nut, Flangless, Short, 1/8, Peek

14-8671-000 4-way union, Silcosteel, includes fittings and capnut

14-8674-000 Mount assembly, Silcosteel w/ fittings (no heaters)

14-8675-002 Mount Sample Tubing Assembly w/ Fittings

14-8711-086 Gripper harness adapter

14-8712-086 Motor harness adapter

14-8714-086 Gripper flat flex harness

14-8715-086 Motor flat flex harness

14-8748-094 Sparger Shield, plastic

X Encoder Assy, US Digital Encoder, requires 14-8833-086 if replacing red

14-8763-300 encoder

14-8780-090 AC Output Board

14-8781-190 PCB, DC Control





14-8782-090 Power Supply

14-8785-000 Oven RTD assembly

14-8785-000 Oven RTD assembly

14-8785-100 Assy RTD, Oven, Atomx

14-8788-000 Oven Cartridge Heater 110v (XPT)

14-8788-200 Oven Cartridge Heater 240V (XPT)

14-8788-200 Oven Cartridge Heater 240V (XPT)

14-8788-300 Assy, Oven Heater, 115V

14-8788-300 Assy, Oven Heater, 115V

14-8789-000 Mount Cartridge Heater 110v (XPT)

14-8789-100 Mount Cartridge Heater 230v (XPT)

14-8789-200 Assy, Mount HTR 115V

14-8789-200 Assy, Mount HTR 115V

14-8789-300 Mount Cartridge Heater 230V (Stratum)

14-8789-400 Soil Valve Heater, Atomx 115V

14-8789-500 Soil Valve Heater, Atomx 230V

14-8790-120 Transferline Heater assembly, 72", 115v

14-8790-420 Transferline Heater assembly, 72", 220V

14-8790-820 Transfer line assy; 230V

14-8790-920 Transfer line assy, 115V

14-8790-C20 Transfer Line Heater Assy, 72", 115V

14-8790-D20 Transfer Line Heater Assy, 72", 230V

14-8790-E20 Assy, Transfer Line Heater 115V

14-8790-F20 Assy, Transfer Line Heater 230V

14-8791-100 Trap Heater assembly, 110V




14-8793-086 AC Power Cable

14-8794-086 DC Power Cable

14-8796-086 Cable Assembly, IRDA to CPU

14-8796-186 Short LNET Cable

14-8796-186 Short LNET Cable

14-8797-086 Cable, Assembly, CPU to SPI Interface.

14-8797-086 Cable, Assembly, CPU to SPI Interface.

14-8797-286 Cable Assy, CPU SPI Interface, StratUm

14-8797-386 Cable Assy, CPU to SPI Interface

14-8798-086 25 PIN DC board to Back Panel

14-8798-186 Cable, Assembly, GCIO Interface.

14-8798-286 Cable Assy, AA70 to Concentrator

14-8798-386 Cable Assy, GC/IO Interface

14-8800-086 Temperature Board DC Cable Assembly

14-8803-000 Stepper motor assembly, X,Y, Z

14-8813-000 Flex cable replacement kit

14-8814-009 Washer, Kalrez for 4-port and 5-port valves

14-8820-016 Nut, 1/16", Short, PEEK

14-8820-016 Nut, 1/16", Short, PEEK

14-8820-016 Nut, 1/16", Short, PEEK

14-8829-055 Encoder, x, y, and z (Dynapar)

14-8831-000 Y & Z encoder replacement kit

14-8833-086 X encoder cable assembly, black encoder

14-8834-000 Guardian Foam Sensor option



14-8834-100 Guardian Foam Sensor and Eliminator Retrofit Kit

14-8834-100 Guardian Foam Sensor and Eliminator Retrofit Kit

14-8834-155 Foam Module, All Units, Green

14-8834-300 Foam Sensor/Eliminator, Stratum

14-8834-500 Kit, Atomx Foam Sensor

14-8834-500 Kit, Atomx Foam Sensor

14-8834-600 Kit, Atomx Eliminator Upgrade

14-8834-600 Kit, Atomx Eliminator Upgrade

14-8836-100 3000/3100 Guardian foam sensor retrofit kit.

14-8838-057 AC Troubleshooting LED

14-8856-000 Assy, 10mL Antifoam 1520

14-8856-000 Assy, 10mL Antifoam 1520

14-8856-000 Assy, 10mL Antifoam 1520

14-8856-000 Assy, 10mL Antifoam 1520

14-8856-000 Assy, 10mL Antifoam 1520

14-8876-086 Mass Flow Controller Cable



14-8876-186 Cable, Assembly, MFC Comm.

14-8876-386 Cable Assy, Mass Flow Controller Comm/Power

14-8898-075

VOC Teklink Control Software capable of controlling Velocity XPT Purge and

Trap Concentrators with AQUATek 70/SOLATek 72 autosampler systems.

14-8898-075

VOC Teklink Control Software capable of controlling Velocity XPT Purge and

Trap Concentrators with AQUATek 70/SOLATek 72 autosampler systems.

14-8900-074 User Manual, Velocity XPT

14-8900-117 Shipping Carton, Velocity XPT

14-8900-PRT Velocity Refurb Kit, parts only

14-8900-PTLV Velocity refurb kit, w/out 6-port valve

14-8900-RFB Velocity Refurb Kit, with labor

14-8901-450 LED Cable, Drain Valve

14-8901-450 LED Cable, Drain Valve

14-8901-550 Valve LED Power Cable, W/3" LED Ext.

14-8901-550 Valve LED Power Cable, W/3" LED Ext.

14-8901-600 Valve Manifold Assembly w/ 3-port Soleniod Valves, Fittings, and Cables

14-8901-650 Solenoid Valve Manifold Assy, LQX

14-8901-750 3-port solenoid valve for manifold

14-8901-750 3-port solenoid valve for manifold

14-8902-000 Discrete 3-port Solenoid Valve Assembly, w/ fittings (Drain or Eliminator Valves)

14-8904-586 Assembly, valve LED power cable

14-8905-116 1/8" to 1/16" Union Silcosteel Coated w/ ferrules (No 1/8" ferrule)

14-8906-050 Mass Flow Controller Assy


14-8907-000 Mass Flow Controller Assy, HT3

14-8908-000 Trap Injection Port w/ septa (XPT)

14-8909-043 Thermal Green Septa for Trap Injection Port

14-8909-043 Thermal Green Septa for Trap Injection Port

14-8911-003 DryFlow Moisture Trap (W)

14-8914-016 Nut, 1/8 Black Delrin Upchurch



14-8915-016 1/8" Manifold Bushing, Delrin

14-8915-016 1/8" Manifold Bushing, Delrin

14-8916-016 Nut, Black ,Upchurch, 1/16 Long

14-8916-016 Nut, Black ,Upchurch, 1/16 Long

14-8918-016 1/8" TO 1/8" Bulkhead union silcosteel coated

14-8919-016 1/8" TO 1/16" Graphite Vespel Reducing Ferrule

14-8920-000 Sample Heater Assembly for all glassware types, 110V




14-8920-300 Assy, Heater, Sample 5/25mL 230VAC



14-8920-500 Atomx, Sample Heater Kit (115V)






14-8921-000 Sparger kit, 5mL fritted





14-8922-000 Sparger kit, 25 mL fritted





14-8922-100 25mL frit Sparge Glassware Kit Atomx

14-8922-100 25mL frit Sparge Glassware Kit Atomx

14-8923-000 Sparger kit, 5 mL fritless










14-8924-100 25mL fritless Sparge Glassware Kit Atomx

14-8924-100 25mL fritless Sparge Glassware Kit Atomx

14-8925-000 Sparger kit, 5 mL needle

14-8925-100 kit, 5mL needle sparge, Stratum


14-8926-000 Sparger kit, 25 mL needle



14-8927-002 PEEK Tubing, 1/16" OD, Green (per foot)





14-8928-002 PEEK Tubing, 1/16" OD, Orange (per foot)




14-8938-002 Tubing, Silcosteel, 1/16"OD x .04" ID (no siloxane)





14-8962-101 Syringe plunger mounting screw, 8-32 shoulder screw, 4-port

14-8981-350 5-port syringe valve, w/ nuts, ferrules, & washers

14-8993-000

Cryofocusing Module for StratUm PTC, 11OV. Cryofocusing trap for use with capillary columns from 0.53 to 0.20mm ID (non-split applications). Instruction manual and interface to StratUm PTC included. Requires StratUm PTC for operation. If connecting to an Agilent 6890 you must order a 6890 bracket kit

P/N 14-7341-280. (For backpressure regulated systems you must purchase an external regulator assembly P/N 14-3938-000)

14-8993-000

Cryofocusing Module for StratUm PTC, 11OV. Cryofocusing trap for use with capillary columns from 0.53 to 0.20mm ID (non-split applications). Instruction manual and interface to StratUm PTC included. Requires StratUm PTC for operation. If connecting to an Agilent 6890 you must order a 6890 bracket kit P/N 14-7341-280. (For backpressure regulated systems you must purchase an external regulator assembly P/N 14-3938-

000)

14-8993-100

Cryofocusing Module for StratUm PTC, 230V. Cryofocusing trap for use with capillary columns from 0.53mm to 0.20mm ID (non-split applications). instruction manual and interface to StratUm PTC included. Requires StratUm PTC for operation. If connecting an Agilent 6890 you must order a 6890 bracket kit P/N

14-7341-280. (For backpressure regulated systems you must purchase an external regulator assembly P/N 14-3938-000)

14-8993-100

Cryofocusing Module for StratUm PTC, 230V. Cryofocusing trap for use with capillary columns from 0.53mm to 0.20mm ID (non-split applications).

Instruction manual and interface to StratUm PTC included. Requires StratUm

PTC for operation. If connecting an

Agilent 6890 you must order a 6890 bracket kit P/N 14-7341-280. (For backpressure regulated systems you must purchase an external regulator assembly P/N 14-3938-000)

14-8997-000 Forward Focusing Chamber Assembly w/ Fittings

14-9001-077 Electronic Crimper for 12x32 mm vials.(115V)

14-9001-077 Electronic Crimper for 12x32 mm vials.(115V)

14-9001-177 Electronic Crimper for 12x32mm vials. (230V)

14-9001-177 Electronic Crimper for 12x32mm vials. (230V)

14-9024-016 Manifold Frit, stainless steel, to vent valve

14-9025-000 1/16" PEEK tubing retrofit kit for units before SN US02315001

14-9035-000 FFC Cartridge Heater 120V

14-9035-100 FFC Cartridge Heater 230V

14-9042-016 Sample Mount needle ferrule, 1/16"

14-9043-016 Sample mount needle nut, 1/16"

14-9053-080 Side Latch, snap-in for top lid

14-9085-120 TRL heater assy, 115V

14-9085-220 TRL heater assy, 230V

14-9108-034 Fuse, 8 pico amp

14-9123-000 Needle stripper assy

14-9126-050

6-port Valve Assembly, small body, 24 VDC includes Valve, fittings, actuator, controller and cable

14-9126-050

6-port Valve Assembly, small body, 24 VDC includes Valve, fittings, actuator, controller and cable

14-9126-150 6-port Valve small body w/ slider.

14-9126-150 6-port Valve small body w/ slider.

14-9126-250 6 port actuator only, SM body valve

14-9126-250 6 port actuator only, SM body valve

14-9126-350 Rotor, 6-port valve, small body after SN US04119002

14-9126-350 Rotor, 6-port valve, small body after SN US04119002

14-9131-000 Vial loader motor assy

14-9133-079 Vial insert for 9ml and 12ml vials. (1 insert required per carrousel position)

14-9133-179 Vial insert for 11ml vials. 10pk (1 insert required per carrousel position)

14-9139-000 Dual Optical Sensor Assy

14-9145-050 8-Port Valve Assembly

14-9145-150 8-port valve only

14-9145-250 8-port valve rotor

14-9145-350 8-port valve and actuator

14-9145-450 8-port valve control box

14-9155-000 Sample/mixer motor assy

14-9172-067 HT3 1ml loop, Silco coated.

14-9172-067 HT3 1ml loop, Silco coated.

14-9180-090 PCBA, Processor, Motor

14-9181-086 Cable, Assembly, CPU to Display Cable.

14-9182-086 Cable Assy, RJ45 Ethernet

14-9182-086 Cable Assy, RJ45 Ethernet

14-9183-000 Oven heater cartridge assy, 115V

14-9183-100 Oven heater cartridge assy, 230V

14-9185-090 PCBA, AC Output Board



14-9240-100 Platen heater assembly, 115 VAC

14-9240-200 Platen heater assembly, 230V

14-9258-000 Platen worm assembly

14-9266-000 Carrousel drive assy

14-9266-400 Carousel, Drive Assy, AQUATek 100

14-9300-000

Teledyne Tekmar HT3 Headspace Autosampler. This static headspace autosampler comes with our 60 position autosampler, 10 position platen heater, integrated Optimix equilibrium system, and completely heated Silcosteel sample pathway. Entire system can be heated from ambient up to 300C in increments of 1C. Valve and loop configuration includes

1ml standard loop. System's gas flows and pressure are electronically monitored and controlled. Windows XP or 2000 is required to operated the included HT3 TekLink software. Power requirements are 115V,

50/60 Hz, 10A. Make sure to order the appropriate GC interface cable to ensure proper installation.

14-9300-00S

Teledyne Tekmar HT3 Dynamic Headspace Autosampler. This dynamic headspace autosampler comes with our 60 position autosampler, 10 position platen heater, integrated Optimix equilibrium system, and completely heated

Silcosteel sample pathway. Entire system, including trap, can be heated from ambient up to 300C in increments of 1C. Valve and loop configuration includes 1ml standard loop. Dynamic mode includes 12" x 1/8" Tenax/Silica Gel and Charcoal (#3) trap and Vocarb

3000 (K) trap. Static and Dynamic modes may be used interchangeably throughout the same schedule. System's gas flows and pressure are electronically monitored and controlled. Windows XP or 2000 is required to operate the included HT3 TekLink software. Power requirements are

115V, 50/60 Hz, 10A. Make sure to order the appropriate GC interface cable to ensure proper installation.

14-9300-075 HT3 TekLink Software.

14-9300-100 HT3 Static 230V version.

14-9300-10S HT3 Dynamic, 230V version.

14-9300-1UPG Dynamic(Trap) Upgrade Kit, 115V. This does not include labor.

14-9300-2UPG Dynamic(Trap) Upgrade Kit, 230V. This does not include labor.

14-9300-IQL Loop Documentation Only

14-9300-IQLF Loop Full IQ/OQ with Labor and Docs

14-9300-IQLL Loop Installation Qualification with Labor and Docs

14-9300-IQT Trap Documentation Only

14-9300-IQTF Trap Full IQ/OQ with Labor and Docs

14-9300-IQTL Trap Installation Qualification with Labor and Docs

14-9300-OQLL Loop Operation Qualification with Labor and Docs

14-9300-OQTL Trap Operation Qualification with Labor and Docs

14-9333-003 Trap, BTEX + MTBE

14-9333-403 Strat-Trap, BTEX + MTBE

14-9333-403 Strat-Trap, BTEX + MTBE

14-9338-000 Elevator Mechanical Stop for Vextra PK stir motor, prior to SNUS04162009

14-9338-100 Elevator Mechanical Stop for SKC SST stir motor, after SNUS04162009

14-9363-100 Assy, Cooling Fan, Velocity

14-9384-002 PEEK Tubing, restrictive, 0.010 ID x 1/16" OD, Blue (per foot)

14-9396-086 Cable, Assembly, Valco/MFC Power.

14-9397-100 Optical Sensor Assy, 24"

14-9401-000 Stepper motor Assy

14-9401-000 Stepper motor Assy

14-9403-086 Cable, Assembly, Main AC Harness.

14-9404-000 Oven RTD Assy, High Temp Leads

14-9404-100 Platen RTD Assy

14-9407-086 Cable, Assembly, Valco Control.

14-9410-016 Quick Disconnect, 1/16".

14-9414-067 HT3 100ul loop, Silco coated.




14-9415-167 HT3 300ul loop, Silco coated

14-9415-167 HT3 300ul loop, Silco coated



14-9417-067 HT3 2 ml loop, Silco coated.



14-9428-035 Ferrite filter assy

14-9432-034 CAP Fuse, 2A

14-9433-034 CAP Fuse, 3.15A

14-9434-034 CAP Fuse, 5A

14-9437-000 Cooling fan, front and rear

14-9477-000 RTD Jumper

14-9525-300 Rinse Station

14-9571-022 Latch, Front Cover

14-9577-090 PCB, LED Banner Control Assembly

14-9577-090 PCB, LED Banner Control Assembly

14-9593-090 Power Supply, 24 VDC

14-9593-090 Power Supply, 24 VDC

14-9602-055 Encoder, x,y, and z (US Digital)

14-9620-294 Drain Tray

14-9622-002 Tubing, Siltek, 1/16" OD x 0.040" ID (per foot)


14-9623-002 Tubing, Transfer Line, Siltek (per foot), 0.021 ID x .029 OD

14-9623-002 Tubing, Transfer Line, Siltek (per foot), 0.021 ID x .029 OD

14-9639-090 Power Supply 25W

14-9639-090 Power Supply 25W

14-9640-090 Power Supply, 65 W, 12VDC

14-9642-002 Tubing, Wire Reinforced (Clear), ea= 1ft

14-9654-086 LED Banner cable assy

14-9661-055 Encoder

14-9719-000 Pumper, Kloehn, V6

14-9754-086 Shimadzu 2010-2014 Interface Cable







14-9778-016 Nut 1/8", 1/4 - 28, PEEK, Long

14-9778-016 Nut 1/8", 1/4 - 28, PEEK, Long

14-9784-250 7-Port Valve for Syringe Pumper

14-9786-079 Vial Stripper Adapter

14-9790-000 Carriage Assembly w/US Digital Encoders

14-9790-100 Carriage Assembly w/out Encoders


14-9800-075

14-9800-075

VOC Teklink Control Software capable of controlling the StratUm PTC with

AQUATek 70 / SOLATek 72 autosampler systems

VOC Teklink Control Software capable of controlling the StratUm PTC with

AQUATek 70 / SOLATek 72 autosampler systems

14-9800-100

StratUm PTC Sample Concentrator 110V. Includes 60" Siltek heated transferline, Siltek tubing and Siltek treated fittings throughout the sample pathway, heated sample mount, water removal system, U-Trap technology, glassware bypass injection port, 5 ml frit sample sparger,

Vocarb 3000 trap, #9 trap, spare fuses, instruction manual, and RS-232 interface capability. Includes VOC Teklink software. Requires for operation a PC with CD-ROM drive running Microsoft Windows XP

Only. Also requires the appropriate GC or GC/MS interface cable.

14-9800-1e0

StratUm PTC Sample Concentrator 110V with Guardian Foam Sensor / Foam

Eliminator. Includes 60" Siltek heated transferline, Siltek tubing and Siltek treated fittings throughout the sample pathway, heated sample mount, water removal system, U-Trap technology, glassware bypass injeciton port, 5 ml frit sample sparger, Vocarb 3000 trap, #9 trap, spare fuses, instruction manual, and RS-232 interface capability.

Includes VOC Teklink software. Requires for operation a PC with CDROM drive running Microsoft Windows XP Only. Also requires the appropriate GC or GC/MS interface cable. If operating the StratUm PTC without an autosampler a rinse reservoir or rinse tap kit is required.

14-9800-200

StratUm PTC Sample Concentrator 230V. Includes 60" Siltek heated transferline, Siltek tubing and Siltek treated fittings throughout the sample pathway, heated sample mount, water removal system, U-Trap technology, glassware bypass injection port, 5 ml frit sample sparger,

Vocarb 3000 trap, #9 trap, spare fuses, instruction manual, and RS-232 interface capability. Includes VOC Teklink software. Requires for operation a PC with CD-ROM drive running Microsoft Windows XP only.

Also requires the appropriate GC or GC/MS interface cable.

14-9800-2e0

StratUm PTC Sample Concentrator 230V with Guardian Foam Sensor / Foam

Eliminator. Includes 60" Siltek heated transferline, Siltek tubing and Siltek treated fittings throughout the sample pathway, heated sample mount, water removal system, U-Trap technology, glassware bypass injection port, 5 ml frit sample sparger, Vocarb 3000 trap, #9 trap, spare fuses, instruction manual, and RS-232 interface capability.

Includes VOC Teklink software. Requires for operation a PC with CDROM drive running Microsoft Windows XP only. Also requires the appropriate GC or GC/MS interface cable. If operating the StratUm PTC without an autosampler a rinse reservoir or rinse tap kit is required.

14-9800-KIT Kit box, Stratum

14-9800-PRT StratUm PTC Refurb Kit, parts only

14-9800-PTLV Refurb Kit, Stratum, Parts Only, W/O 6-Port

14-9800-RFB StratUm PTC Refurb Kit, with labor

14-9801-016 Mount/Tee Assy, Siltek w/ Fittings (no heaters)

14-9809-054 65lb Gas Shock

14-9828-120 Trap Heater, Nichrome Wire, 115V




14-9840-100 Trap Blower Fan Assy

14-9841-028 Switch, Limit, Miniature

14-9845-016 Trap Manifold Assy w/ Fittings

14-9845-016 Trap Manifold Assy w/ Fittings

14-9847-000 Cooling Fan Assy, Low CFM

14-9849-000 Top of Trap Injection Port Assy (StratUm)

14-9852-090 Power Supply, +24V, 65W

14-9857-086 DC power harness cable assy

14-9858-086 AC power harness cable assy

14-9879-086 Trap AC extension cable, 115V

14-9880-086 Trap Heater RTD extension cable assy

14-9895-120 Heater, Condensate Trap, 115V




14-9908-003 #9 Trap, straight (XPT)

14-9908-003 #9 Trap, straight (XPT)

14-9908-403 Strat-Trap, #9 (U-shaped)

14-9908-403 Strat-Trap, #9 (U-shaped)

14-9909-403 Strat-Trap, Tenax/Silica Gel/Carbo Sieve III (#10)

14-9909-403 Strat-Trap, Tenax/Silica Gel/Carbo Sieve III (#10)

14-9924-016 Fitting, 1/4-28 to Barb



14-ACAN-017 Packaging, AUTOCan

14-ACAN-074 AUTOCan manual

14-ACAN-KIT Kit box

15-0000-017 Box and Foam, Atomx

15-0000-017 Box and Foam, Atomx

15-0000-075 Atomx Teklink, CD

15-0000-075 Atomx Teklink, CD

15-0000-100

Atomx automated sample prep system for solids and liquids 110VAC. 80 vial position autosampler and built in Purge and Trap module with automated methanol extraction capability. System includes 3 standard spiking valves, mass flow controller, and a #9 analytical trap. Package includes Atomx Teklink, RS-

232 cable, 5mL fritted glassware, water reservoir, installation kit box, and 1 year warranty.

15-0000-10C

Atomx automated sample prep system for solids and liquids with chiller tray

110VAC. 80 vial position autosampler and built in Purge and Trap module with automated methanol extraction capability. System includes 3 standard spiking valves, mass flow controller, and a #9 analytical trap. Package includes Atomx

Teklink, RS-232 cable, 5mL fritted glassware, water reservoir, installation kit box, and 1 year warranty. System also requires a re-circulating bath pn 21-

0700-000 for cooling operation.

15-0000-1E0

Atomx automated sample prep system for solids and liquids with Eliminator foam prevention 110VAC. 80 vial position autosampler and built in Purge and

Trap module with automated methanol extraction capability. System includes 3 standard spiking valves, mass flow controller, and a #9 analytical trap. Package includes Atomx Teklink, RS-232 cable, 5mL fritted glassware, water reservoir, installation kit box, and 1 year warranty.

15-0000-1EC

Atomx automated sample prep system for solids and liquids with chiller tray and

Eliminator foam prevention 110VAC. 80 vial position autosampler and built in

Purge and Trap module with automated methanol extraction capability. System includes 3 standard spiking valves, mass flow controller, and a #9 analytical trap. Package includes Atomx Teklink, RS-232 cable, 5mL fritted glassware, water reservoir, installation kit box, and 1 year warranty. System also requires a recirculating bath pn 21-0700-000 for cooling operation.

15-0000-200

Atomx automated sample prep system for solids and liquids 230VAC. 80 vial position autosampler and built in Purge and Trap module with automated methanol extraction capability. System includes 3 standard spiking valves, mass flow controller, and a #9 analytical trap. Package includes Atomx Teklink, RS-

232 cable, 5mL fritted glassware, water reservoir, installation kit box, and 1 year warranty.

15-0000-20C

Atomx automated sample prep system for solids and liquids with chiller tray

230VAC. 80 vial position autosampler and built in Purge and Trap module with automated methanol extraction capability. System includes 3 standard spiking valves, mass flow controller, and a #9 analytical trap. Package includes Atomx

Teklink, RS-232 cable, 5mL fritted glassware, water reservoir, installation kit box, and 1 year warranty. System also requires a re-circulating bath pn 21-

0701-000 for cooling operation.

15-0000-2E0

Atomx automated sample prep system for solids and liquids with Eliminator foam prevention 230VAC. 80 vial position autosampler and built in Purge and

Trap module with automated methanol extraction capability. System includes 3 standard spiking valves, mass flow controller, and a #9 analytical trap. Package includes Atomx Teklink, RS-232 cable, 5mL fritted glassware, water reservoir, installation kit box, and 1 year warranty.

15-0000-2EC

Atomx automated sample prep system for solids and liquids with chiller tray and

Eliminator foam prevention 230VAC. 80 vial position autosampler and built in

Purge and Trap module with automated methanol extraction capability. System includes 3 standard spiking valves, mass flow controller, and a #9 analytical trap. Package includes Atomx Teklink, RS-232 cable, 5mL fritted glassware, water reservoir, installation kit box, and 1 year warranty. System also requires a recirculating bath pn 21-0701-000 for cooling operation.

15-0000-KIT Installation Kit Box

15-0076-280 Tray, Carousel, 80 Position Atomx

15-0086-090 PCB, Temp Control

15-0087-002 Tubing, Drain, Self Retracting (per foot)

15-0088-016 Union, 1/4" Brass

15-0100-100 Heater Assy, Sample Vial

15-0100-200 Heater Assy, Sample Vial, 55W, 230VAC

15-0110-000 Belt, Mixer Drive, Atomx

15-0112-000 Manifold, Is Valve Atomx

15-0112-100 3 POS Manifold (w/ 1-plug), Internal Standard Valve AQUATek 100

15-0129-053 Needle, 3 Stage, Atomx

15-0136-002 Tubing, 1/4" OD Blue Polyurethane (per foot)

15-0171-016 Sample Mount Assy, w/o Fittings Atomx

15-0180-300 Vial Retraction Assy Atomx

15-0185-079 Bearing Guide, Carousel Tray Atomx

15-0197-090 PCB, Aux DC Board

15-0201-024 Vessel, 15mL Amber IS

15-0201-024 Vessel, 15mL Amber IS

15-0202-079 Bushing, Peek W/ O-Ring, IS Vessel

15-0202-079 Bushing, Peek W/ O-Ring, IS Vessel

15-0216-000 Assy, Elevator Sample Motor, Atomx

15-0233-031 Knob, Carousel Tray Atomx

15-0236-050 Valve, Is Atomx

15-0236-050 Valve, Is Atomx

15-0255-000 Carousel, Drive Assy, Atomx

15-0258-000 Stir Bar, Polygon 0.25 x 0.75"

15-0258-000 Stir Bar, Polygon 0.25 x 0.75"

15-0259-000 Guard, Assy Mount Plastic, Atomx

15-0270-052 Syringe, 27 mL With Side Port

15-0271-000 Mounting Kit, IS Valve

15-0271-000 Mounting Kit, IS Valve

15-0272-002 Line Assy, I.S., w/ Minstac Connector

15-0272-002 Line Assy, I.S., w/ Minstac Connector

15-0273-000 Screen, 12 UM, Inline, IS Assembly

15-0274-050 6-Port Valve Assy .030 Port W Conn

15-0275-250 6-Port Valve Actuator Assembly

15-0277-000 Clamp, Ring Valco Valve Heavy

15-0278-050 Check Valve (CV-3322)

15-0279-000 Blank Water Reservoir, 10 Liters

15-0280-050 Valve, 24VDC, LQX 12

15-0285-016 1/8" Vespel ferrule

15-0290-086 USB to RS232 Converter Cable

15-0290-086 USB to RS232 Converter Cable

15-0291-000 Chiller, Atomx

15-0291-000 Chiller, Atomx

15-0293-000 Lubricant, Dupont Krytok #GPL206

15-0380-090 PCB, Motor Control

15-0380-190 PCBA, Motor Control, A100

15-0408-100 Oven Heater Assy, Atomx 115V

15-0408-200 Oven Heater Assy, Atomx 230V

15-0439-000 External Pressure Regulator

15-0439-000 External Pressure Regulator

15-0457-053 2-Stage Sample Needle

15-0463-180 Carousel, 100 Position, 40ml Vial

15-0485-000 Drain/Foam 24VDC Solenoid Valve Kit

15-0485-050 Valve 24VDC, SMC

15-0500-000

AQUATek 100 Liquid Autosampler, universal voltage with 5mL PEEK sample loop. Including 100 vial (40mL) capacity, 2 position variable dosing standard valves. Includes chiller tray, blank water reservoir, start up kit, required software for Stratum and Velocity operation, and 1 year warranty. If installing to a Velocity

XPT with serial number US07320009 or earlier p/n 14-8781-190 D.C. Output board will be required for proper operation. Pricing available on Velocity XPT spare parts list.

15-0500-017 Box and Foam

15-0500-075 A-100 Software & Manual CD

15-0500-KIT Kit Box

15-0503-000 Pull Handle

15-0504-090 PCB, AT-100 Temp Board

15-0507-000 Service Loop Tubing Assy

15-0528-100 Upgraded Kit, A100 pH Sensor

15-0545-067 Sample Loop, PEEK, 5ml A-100




15-0551-000 Concentrator Adapter Cable 25 to 9 pin

15-0554-073 Clamp - Cable, Adjustable

15-0561-020 Assy, Water Reservoir/Heater Universal Voltage

15-0650-000 Pressure Regulator Assy, Atomx-after US10313001

15-0650-200 Pressure Regulator Upgrade Kit, Atomx - Before US10313001

15-0806-200 Regulating, Self Relieving, 0-15psi

152-104 Tube TFE, IND, 1/4 D x 3/16 ID

21-0700-000

Recirculating bath, refrigerated, Model 2050W. 120V, 60Hz, 11 amps, compact size - 12-1/2" x 8-3/4" footprint

21-0700-000


Recirculating bath, refrigerated, Model 2050W. 220V, 60Hz, 11 amps, compact size - 12-1/2" x 8-3/4" footprint 21-0701-000

21-0701-000


885-291 Check valve 1/8"




BR-8900-RFB Velocity Refurb Kit with labor, in house

Item No.

Description

Item No.

Description

Item No.

Description

-547817 Elevator Assy, Atomx 080-613 Battery, Lithium, SIZE 2032

Related manuals

Samsung

AP-8020

YSI

WaterLOG H-3123 Submersible Pressure Transducer

Agilent Technologies

19239A

Agilent Technologies

6850 Series II

Novus

723+0069+000

DURA

9503526

Cisco Systems

MCS7890C1BE8K9

YSI

Eclipse4660 Operators

Metrohm

863 Compact IC Autosampler