Stern Pinball KISS Pro Owner Manual

WARNING

IMPORTANT HEALTH WARNING: PHOTOSENSITIVE SEIZURES - A very small percentage of people may experience a seizure when exposed to certain visual images, including flashing lights or patterns. Even people with no history of seizures of epilepsy may have an undiagnosed condition that can cause “photosensitive epileptic seizures” due to certain visual images, flashing lights or patterns. Symptoms can include light-headedness, altered vision, eye or face twitching, jerking or shaking of arms or legs, disorientation, confusion, momentary loss of awareness, and loss of consciousness or convulsions that can lead to injury from falling down or striking nearby objects.

IMMEDIATELY STOP PLAYING AND CONSULT A DOCTOR IF YOU EXPERIENCE ANY OF THESE SYMPTOMS.

Stern Pinball machines are assembled in Melrose Park, Illinois, USA; each pinball machine has unique characteristics that make it a one-of-a-kind

American-made product. Each machine will have variations in appearance resulting from differences in the machine’s particular wood parts, individual silk screened art and mechanical assemblies. Stern Pinball has inspected each game element to insure it meets our quality standards.

© 2015 KISS Catalog, Ltd. Under License to Epic Rights.

Games configured for North America operate on 60 cycle electricity only. These games will not operate in countries with 50 cycle electricity (Europe

UK, Australia).

1-800-KICKERS - [email protected]

WWW.STERNPINBALL.COM - FACEBOOK.COM/STERNPINBALL

KISS PRO

KISS PRO #500-55H1-01

MANUAL #780-50H1-01

2

TABLE OF CONTENTS

1. Setup and Moving .................................. 3

1.1 First-time Setup Instructions................................ 3

1.2 Transporting the Game ........................................ 6

1.3 Maintenance ........................................................ 7

1.4 Maintenance Kits ................................................. 7

1.5 Common Parts ..................................................... 7

2. SPIKE System and Node Guide ............ 8

2.1 SPIKE System Overview ...................................... 8

2.2 Node Bus Cabling ................................................ 8

2.3 System Power ...................................................... 8

2.4 SPIKE Node addresses ........................................ 8

2.5 SPIKE Node Programming................................... 8

2.6 SPIKE System Terminology ................................. 9

2.7 Common SPIKE Node Boards ............................. 9

3. Light, Switch, and Driver Reference ... 10

3.1 SPIKE Node Boards ........................................... 10

3.2 Driver Reference ................................................ 11

3.3 Switch Reference ............................................... 12

3.4 Light Reference .................................................. 15

4. Electronic Pinouts and Schematics.... 19

4.1 SPIKE CPU Node 0 ............................................ 19

4.2 Node 1 Cabinet .................................................. 21

4.3 Lower Playfield 48V 8-Driver Pinout Node 8 ..... 22

4.4 Node 9 Mid Playfield 8-Driver 48V Pinout ......... 23

4.5 Node 10 Upper Playfield 8-Driver 48V Pinout .. 24

4.6 Node 11 Upper Playfield 32-Light and Switch

Pinout .......................................................................... 25

4.7 Dual Motor Driver ............................................... 27

4.8 Main Power Supply ............................................ 27

4.9 Trough Opto Transmitter .................................... 27

4.10 Trough Opto Receiver ........................................ 27

4.11 Star Lower Playfield Grid LED ........................... 28

4.12 Star Upper Playfield LED ................................... 28

4.13 Power Distribution Board ................................... 29

4.14 Power Plug Wiring.............................................. 29

5. Parts Reference .................................... 30

5.1 Playfield Rubber Parts ....................................... 30

5.2 Rubber Size Chart .............................................. 30

5.3 Playfield assemblies, Top ................................... 31

5.4 Playfield assemblies, Bottom ............................. 32

5.5 Backbox Parts.................................................... 33

5.6 Speaker Panel Parts .......................................... 33

5.7 Cabinet Parts ..................................................... 34

5.8 Auto Launch Assembly ...................................... 35

5.9 Ball Trough Assembly......................................... 35

5.10 Flipper Assembly, Left ........................................ 36

5.11 Flipper Assembly, Right ..................................... 36

5.12 Sling shot Assemblies ........................................ 37

5.13 Slingshot Flash Assy - 02 .................................. 37

5.14 Slingshot Flash Assy- 04 ................................... 37

5.15 Power Scoop ..................................................... 38

5.16 Up-Post Vuk Assembly ...................................... 38

5.17 Pop Bumper Assembly ...................................... 39

5.18 Right Ramp Pro Assy ......................................... 40

SPIKE PINBALL SOFTWARE UP-

DATE INSTRUCTIONS

1. Obtain game software update file (filename ends in “.spk”) from www.sternpinball.com or from authorized Stern distributor.

2. Place game software update file ( “.spk”) in root directory of a blank FAT32-formatted USB flash drive

3. Use backbox power switch to turn off game

4. Plug in USB flash drive to CPU board USB connector (CN20 or CN21). Refer to www.sternpinball.com

5. Turn on game

6. The game will automatically begin software update

7. Select the correct .spk update file from list.

8. Press Enter on the service switches to start update

9. When the display indicates “Update Complete”, turn off game

10. Remove USB flash drive from CPU board

11. Turn game on to complete the update and play pinball!

12. Detailed instructions and troubleshooting tips are available in the game manual, www.sternpinball.com and authorized Stern distributors.

5.19 Amplifier Assembly ............................................ 40

5.20 Left Ramp Assy .................................................. 40

5.21 Paul Assembly, Pro ............................................ 40

5.22 Plastic Flash Assy - 05 ....................................... 41

5.23 Plastic Assy - 06 ................................................ 41

5.24 Plastic Assy - 08 ................................................ 41

5.25 Plastic Assy - 09 ................................................ 41

5.26 Plastic Assembly - 10 ........................................ 41

5.27 Plastic Assembly - 11 ........................................ 42

5.28 Ball Guide Assembly - 03................................... 42

5.29 Plastic Flash Assembly - 28 ............................... 42

5.30 Ball Guide Assembly - 04................................... 42

5.31 Gene Head Assy ................................................ 43

5.32 Spinning Disk Assembly .................................... 43

6. Specifications ....................................... 44

6.1 Game Dimensions .............................................. 44

7. Warranty ................................................ 45

7.1 Warnings, Compliance, and Legal Notices ........ 45

KISS PRO MANUAL #500-55H1-01

© 2015 KISS Catalog, Ltd.

Under License to Epic Rights.

1. SETUP AND MOVING

1.1 FIRST-TIME SETUP

INSTRUCTIONS

Your brand new Stern Pinball Machine is carefully packed for safety and security.

For your safety, exercise caution and use the correct tools and sufficient help when setting up your new game.

2

2

TOOLS REQUIRED

• 5/8” Socket Wrench

• Utility Knife

• Snips

• A helper

5

5

SETUP AND MOVING

7

CAUTION: AT LEAST TWO (2)

PEOPLE ARE REQUIRED TO

MOVE AND MANEUVER THE

GAME. USE PROPER MOVING

EQUIPMENT AND EXTREME

CARE WHILE HANDLING.

STERN PINBALL MACHINES

WEIGH OVER 250LBS BOXED.

7

1

6

1. Locate the side labeled “TRUCK

THIS SIDE ONLY”. The bottom of the game faces this side.

2. Open the top box flaps by pulling hard in an upward motion on each flap. If the flaps are taped, cut the tape first, taking care to avoid the box staples.

8

8

3. Remove the four (4) foam pieces and two (2) narrow box tubes which contain the four (4) identical legs with levelers.

4. DO NOT CUT STRAPPING YET.

Keep backbox secured in the down position.

5. With the utility knife, carefully cut down the left and right corners of the box.

6. Let the face fall forward and remove the entire side by carefully cutting the bottom.

7. With the game still in its folded position, use a ⅝” wrench to loosen and remove the 2 leg bolts on each side of the front cabinet. Ensure the leg levelers are screwed all the way in to the legs.

15

14

9

11

11

14

8. Install front legs using the bolts removed from Step 5. Secure tightly.

9. Use a helper to carefully set the game down on the front legs.



10. Set aside the open box.

11. With the ⅝” socket wrench, loosen and remove the 2 leg bolts on each side of the rear cabinet, 4 total.


12. Using supports or two people, prop the rear of the cabinet up.

13. Ensure the rear leg levelers are screwed all the way into the legs.

14. Install rear legs using the 4 bolts removed from step 11.

3


FIRST-TIME SETUP CONTINUED

21

17

19

15. Cut nylon strapping and remove protective strap corner guards

16. Locate the factory keys, either on the shooter rod or taped to the playfield glass.

17. Using the snips, cut the tie-wrap securing the keys if required. One set of keys is for the front coin door, the other set of keys is for accessing components in the backbox

18. Open the front coin door.

19. Reach into the game and remove the retaining clip at the rear of the cash box.

20. Remove the cash box lid by sliding it toward you.

21. Store the backbox keys, if desired, on the metal hook located in the coin door.

22. Locate and remove the pinballs, plumb bob, and backbox bolts from the cash box.

23. Replace the cash box lid and retaining clip for future use.

25

27

26

4

24. Locate the two (2) backbox bolts in the cash box.

25. Carefully raise backbox to upright position while ensuring that cables are not pinched.

26. Use the ⅝” wrench to Install the two (2) backbox bolts to secure the backbox as indicated on the back of the cabinet.

27. Reach inside the cabinet and move and hold the yellow top molding lock handle to the left.

28. Remove the front top molding and then release the handle.

29. Remove the playfield glass by sliding it toward you and carefully place it in a safe location.

Remove all playfield shipping tie downs, shipping blocks, and packing foam, and follow any game-specific unpacking instructions included in the playfield, if present.

CAUTION: PLAYFIELD GLASS IS MADE FROM HIGH-STRENGTH TEMPERED GLASS.

TEMPERED GLASS IS SENSITIVE TO EXTREME TEMPERATURE SHIFTS AND COR-

NER NICKS, WHICH CAN CAUSE THE GLASS TO FAIL CATASTROPHICALLY. TAKE

CARE TO STORE THE GLASS ON A SOFT, ROOM-TEMPERATURE SURFACE AND

PREVENT THE CORNERS FROM BEING DAMAGED.




FIRST-TIME SETUP CONTINUED

30. If pinballs were already installed into the lower ball trough, remove them before lifting the playfield.

31. Raise the playfield and rest it against the backbox.

32. Grasp the lower arch between the flippers, and firmly but gently pull directly up to raise the playfield 8-12 inches.

33. While holding the playfield up, pull the playfield toward you until the two playfield supports are over the front edge of the cabinet.

34. Rest the playfield on the front edge of the cabinet.

35. Visually inspect all cabinet cables and connector terminations; ensure no wires or cables are pinched and that cable harnesses are not pulled tight.

36. Locate the plumb bob in the parts bag in the cash box

37. Slide plumb bob onto the hanger wire. Note: the vertical position of the plumb bob affects tilt sensitivity - higher makes the game more sensitive to tilting.

38. Tighten the Thumb Screw finger-tight.

39. Install the correct number of pinballs. Refer to the decal on the lock down assembly for the correct number of pinballs.

LOCATING, LEVELING, AND FINAL SETUP

1. Select a location that is indoors, out of direct sunlight, and climate controlled. Excessive moisture/humidity can cause long-term damage to your game.

2. Adjust the front or rear levelers as necessary to position the playfield level bubble, located on the front right of the playfield next to the shooter lane, to float between the two

(2) black lines. This will place the playfield at the recommended 6.5° pitch. Playfield angles greater than 6.5° can be achieved by turning out the rear leg leveler(s) for increased difficulty and faster gameplay.

3. Use a pinball to roll down the center of the playfield for side-to-side leveling, or use an external bubble level, digital level, or smartphone level app.

4. Plug into a grounded outlet and check for proper operation through DIAGNOSTICS.

5. Check the coin door: With the door closed, insert coins to verify proper operation.

6. Play game: Check for satisfactory operation and adjust game volume (push the Red Buttons inside the Coin

Door).

7. If desired, perform any game diagnostics, game adjustments, and pricing settings at this time.




KISS PRO MANUAL #500-55H1-01 5


1.2 TRANSPORTING THE GAME

When transporting the game, such as in the back of a truck or with a hand truck, the game’s backbox must be secured to prevent damage to the side rails.

1. SECURE THE BACKBOX

1. Ensure that the pinballs are removed from the playfield, and secure any free-moving mechanisms that may get damaged in transport

2. Remove the backbox securing

TOOLS REQUIRED

• STRAP (500LB OR GREATER)

• A HELPER

• HAND TRUCK

STAND UP

6. Remove the legs, rear legs first.

Use a stool or a friend to support

3

NEVER TRANSPORT THE GAME IN A

MOVING VEHICLE WITH THE BACK-

BOX RAISED! TWO PEOPLE ARE RE-

QUIRED TO REMOVE THE LEGS!

2

6

4 bolts

3. Carefully lower the backbox onto the side rails. Use a piece of cardboard or suitable padding between the backbox and the game.

4. Securely strap the back box to the game

5. The game may be transported with the legs on. If the legs must be removed, follow the remaining steps.

2. REMOVE THE LEGS AND the rear of the game.

7. Rest the rear of the game on the ground.

8. Stand the game up on its back.

9. Remove the front two legs.

8

9

6

10. Secure all loose parts and transport with a hand truck in the

KISS PRO MANUAL #500-55H1-01 upright position.

CAUTION




1.3 MAINTENANCE

REGULAR MAINTENANCE - (MONTHLY/500

GAMES)

• Remove the playfield glass

• Enter the software diagnostics menu, start lamp test, then clean and wax the playfield.

• While cleaning the playfield, identify and repair malfunctioning lights, loose parts, cracked plastics and worn rubber parts.

• While in diagnostics, enter the switch test (Select the "SW"

Icon, then "TEST" Icon).

• Use a pinball to actuate all switches and verify the correct switch registers with the switch test.

• The game will play a sound to confirm the switch.

• Lift the playfield and inspect all assemblies for loose parts, broken wires or excessive wear. Look at the bottom of the cabinet for any parts that may have worked loose, then find the source.

• Check all coin door mechanisms and bill acceptor (if installed) for proper operation

• Play the game to ensure all coils and features are working

• Check the playfield to ensure it is level and set to the proper pitch using the bubble level on the right side wood rail.

• Check game audits: Replay % and Ball Time and note abnormal values which can indicate problems.

• Ensure game volume is set appropriately for the location.

• Clean both sides of the playfield glass and reinstall.

• Check and clean pinballs and replace if excessively worn or scuffed. Dirty pinballs accelerate game wear.

OVERHAUL MAINTENANCE (5000 GAMES)

• Verify latest game software is installed

• Check flippers for excessive wear. Excessive flipper sloppiness (vertical or horizontal) or weakness indicates a flipper rebuild is required.

• Clean machine inside and out and check leg levelers for free operation.

• Visual check for loose or broken playfield and cabinet parts and repair as necessary.

• Electrical check: Plug into grounded outlet and check for proper operation through DIAGNOSTICS.

• Replace worn or dirty rubbers.

• Replace pinballs.

• Check all playfield switches with a pinball.

• Check all settings (refer to manual for factory settings).

• Check coin door: With door closed, insert coins to verify proper operation.

• Check for proper adjustment of the plumb bob tilt.

• Play game: Check for satisfactory operation.

COMMON PINBALL TOOLS

• Common nut drivers (¼”, 5/16”, 11/32", ⅜”)

• Phillips screw driver

• Standard Allen wrench/Hex key set

• ⅝” Socket with ratchet

• Adjustable wrench (5/8" & 9/16")

• 6" Torpedo Level (or use a pinball

• Flashlight or headlampv

• Soldering Iron (60w with flat tip), lead-free solder

• Wire cutter

• Wire stripper

• Long nose (“needle nose”) pliers

1.4 MAINTENANCE KITS

Description

KISS Pro Maintenance Kit

• 8 oz pinball playfield wax (Novus # 2) (675-0003-01)

• Standard Pinball (260-5000-00)

• Cleaning Cloth

• All Playfield Rubber Rings

• Spare Fuses

KISS Pro Deluxe Maintenance Kit

• All standard kit items, plus:

• Flipper rebuild kits, Left and Right (500-6307-10,-00)

KISS Playfield Plastics Kit

KISS Playfield Decals Kit

KISS Playfield Decals Kit (Germany)

KISS Pro Cabinet Decal Left

KISS Pro Cabinet Decal Left (Germany)

KISS Pro Cabinet Decal Right

KISS Pro Cabinet Decal Right (Germany)

KISS Pro Cabinet Decal Left

KISS Pro Cabinet Decal Left (Germany)

KISS Pro Cabinet Decal Right

KISS Pro Cabinet Decal Right (Germany)

KISS Pro Cabinet Decal Front

KISS Pro Cabinet Decal Front (Germany)

KISS Pro Playfield, Bare

KISS Pro Playfield, Bare (Germany)

KISS Pro Translite

KISS Pro Translite (Germany)

Part Number

502-6002-H1

502-6003-H1

803-5000-H1

802-5000-H1

802-5000-H1-GER

820-66H1-01

820-66H1-01G

820-66H1-02

820-66H1-02G

820-66H1-03

820-66H1-03G

820-66H1-04

820-66H1-04G

820-66H1-05

820-66H1-05G

830-5000-H1

830-5000-H1G

830-52H1-01

830-52H1-GER

1.5 COMMON PARTS

Description

8 oz Pinball Playfield wax (Novus # 2)

Standard Pinball, 1-1/16 in

Flipper Rebuild Kit Left (Standard)

Flipper Base Plate Kit Left

Flipper Rebuild Kit Right

Flipper Base Plate Kit Right

Part Number

675-0003-01

260-5000-00

500-6307-10

515-6617-01

500-6307-00

515-6617-00




8

SPIKE SYSTEM AND NODE GUIDE

2. SPIKE SYSTEM AND NODE GUIDE

2.1 SPIKE SYSTEM OVERVIEW

The SPIKE Pinball system is a rugged, distributed, and embedded platform custom-designed for the rigors of the pinball machine environment. SPIKE takes advantage of modern technologies to deliver an immersive pinball experience that supports modern features, reduces cabling, and increases serviceability and reliability.

A Stern Pinball machine based on the SPIKE system will have at least two nodes networked together with the SPIKE node bus, a custom industrial pinball control bus that is designed around industry standards and optimized for the pinball environment.

The primary CPU node is networked to one or more input/output nodes over standard Category 5 UTP (unshielded twisted pair) ethernet cabling.

There are five primary types of nodes that are found in the game.

• CPU node (Node 0) - The primary node that controls other nodes in the system. Contains the primary game software for the system and provides SPIKE node bus power for other nodes.

• Cabinet 48V node (Node 1) - Specialized node with specific inputs and outputs for coin doors, tilt mechanisms, and other bottom-cabinet devices.

• 48V playfield node - Controls high power devices such as coils and flashers, and also supports a few switch and low-power outputs. Powered by the system 48V power supply.

• Light and switch node - High-density switch and low-power

LED outputs, bus-powered from the node bus. These boards contain as many 32 switch inputs and light outputs.

• Node extensions - These sub-nodes add additional low-power input and outputs to a specific Power or I/O node and are connected with simple serial bus.

2.2 NODE BUS CABLING

The SPIKE node bus utilizes standard Ethernet-style RJ45 8-pin modular jacks, and off-the-shelf Category 5e or better ethernet cabling. The node bus is electrically different from Ethernet and does not not utilize Ethernet or TCP/IP protocols or signaling standards. SPIKE nodes are not compatible with standard computer networking equipment.

CAUTION: Plugging a SPIKE Node or CPU board into a standard

Ethernet port may damage one or both devices and void your warranty.

2.3 SYSTEM POWER

The SPIKE System is powered from an 48V DC power supply bus. Each SPIKE node converts this voltage to lower voltages required by the node and its specific components. A SPIKE 48V node typically controls high-power outputs such as game coil mechanisms and high-brightness LEDs. These powered nodes are supplied directly with 48V system power. SPIKE standard I/O nodes are low-power nodes that read switch inputs and output to standard-brightness LEDs. Standard I/O nodes use the node bus power, which is supplied by the main CPU node over the node bus modular jack connectors.

COIN-DOOR SAFETY INTERLOCK

To protect the system and for user safety, power to the playfield is disabled when the front coin door is opened. 48V system power and 9V node bus power is disabled to all playfield components until the switch is closed.

2.4 SPIKE NODE ADDRESSES

Each SPIKE node has a unique address ranging from 0 to 15. Not all addresses are used in all games. Nodes can be of the same part number, so the address is specified on the DIP switches on each node. When replacing a node, be certain that the correct address is set. Nodes can have 3-position and 4-position DIP switches. Refer to the appropriate table to set the address for each type of Node. The correct address for a node can be found in the SPIKE node reference section of the manual or in the game diagnostic software. Address 0 is reserved for the backbox CPU node, where the game software resides. Address 1 is reserved for the cabinet node, located inside the coin door. These two nodes do not have DIP switches as their address is not configurable.

11

12

13

14

15

Address

8

9

10

1

OFF

OFF

OFF

OFF

ON

ON

ON

ON

2

OFF

OFF

ON

ON

OFF

OFF

ON

ON

3

OFF

ON

OFF

ON

OFF

ON

OFF

ON

Figure 2.4.1. SPIKE node addresses for nodes with 3-position DIP switches. Addresses 0-7 are not used by SPIKE nodes with 3-position DIP switches.

10

11

12

13

Address

8

9

14

15

1

OFF

OFF

OFF

OFF

ON

ON

ON

ON

2

OFF

OFF

ON

ON

OFF

OFF

ON

ON

3

OFF

ON

OFF

ON

OFF

ON

OFF

ON

4

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

Figure 2.4.2. SPIKE node addresses for nodes with 4-position DIP switches. Addresses 0-7 are reserved for fixed-function nodes and do not require configuration.

2.5 SPIKE NODE PROGRAMMING

The SPIKE nodes are smart nodes that have on-board processors and run embedded code. The nodes are programmed




SPIKE SYSTEM AND NODE GUIDE

SPIKE SYSTEM AND NODE GUIDE CONTINUED

automatically by the CPU node whenever software updates are installed to the CPU. When replacing a node, the CPU node will detect and update the node to the latest software with no user intervention. Always replace nodes with the power to the game turned OFF.

2.6 SPIKE SYSTEM TERMINOLOGY

MULTI GENERAL ILLUMINATION LIGHTING

General Illumination Lighting is two or more lights powered by one control source. These are often a number of LEDs connected in parallel and the system controls these as one large LED. A missing LED will not affect these circuits, however a shorted LED can cause the entire string of LEDs to turn off.

SINGLE LIGHTS

Single lights and LEDs are direct-controlled from SPIKE node boards. A common power source is grounded by individual transistors to turn individual LEDs on and off. Groups of LEDs, usually by node connector, share a common power source, so if a group of LEDs is out, check the wiring for the power source.

FLASHERS

SPIKE games treat flashers the same as single LEDs that draw more power. Flashers are controlled from the same circuits that power regular lights.

DRIVERS

A driver is a circuit that controls a high power-device such as a coil, magnet, or motor. Each device has a common 48V power source that is then connected to ground by a dedicated control transistor. Each driver is protected against shorting, static electricity, and over-current conditions. Take caution as 48V is always present on a device even when it is not energized.

OPTOS

Certain types of optical switches (“optos”) require external signal conditioning. For these optos, they will interface to a SPIKE node via an opto signal conditioning board. Other optical switches connect directly to the Spike node board.

System Protections

CAUTION: Unless explicitly directed by an Authorized Stern Repair technician, perform ALL work on your pinball machine with the power disabled!

INPUT/OUTPUT PROTECTIONS

SPIKE features built-in short-circuit, static electricity, and other protections to maximize reliability. If an LED, coil or other device shorts, it will be disabled but will not shut down the entire system in most circumstances. Groups of LEDs, coils, and switches often share common power supplies or other circuits, so it is possible that a bad device will affect the group of related devices and require removal or repair to fix the group. The system diagnostics will inform the technician of shorted or otherwise malfunctioning devices whenever possible. While the system is protected against permanent damage, it is strongly recommended to repair or replace these bad components as soon as possible to minimize downtime and maximize game earnings.

FUSES

Nodes that have 48 V power are fused individually. Fuse voltage ratings are a safety rating and always must be higher than the circuit the fuse is protecting. Never replace a fuse with a lower voltage-rated fuse. Fuse current ratings must be replaced with the same current value. A higher current value fuse could cause catastrophic failures, and a lower-value fuse will cause premature fuse failures.

Common fuses

Fuse Rating (Amps) Type

3/4 A

3 A

Slow Blow MDL

Slow Blow MDL

4 A

5 A

7 A

8 A

Slow Blow MDL

Slow Blow MDL

Slow Blow MDL

Slow Blow MDL

Part Number

200-5000-17

200-5000-08

200-5000-06

200-5000-01

200-5000-03

200-5000-05

CAUTION: Always replace fuses with the exact current specifications.

2.7 COMMON SPIKE NODE BOARDS

Description

SPIKE CPU Node

SPIKE CPU Node w/ Video Out Support (Backward compatible with -00)

Cabinet Node

48V 8-Driver Node

48V 4-Driver Node

SPIKE 32 Light and Switch Node

Trough Serial Opto Receiver Extension

Type

Node

Part Number

520-6936-00

Node

Node

Node

Node

520-6936-10

520-5319-00

520-6935-00

520-5329-00

Node 520-5322-00

Extension 520-5345-00




LIGHT, SWITCH, AND DRIVER REFERENCE

3. LIGHT, SWITCH, AND DRIVER REFERENCE

KISS PRO

NODE 8

CN14

CN3

CN1

PLAYFIELD FRONT

BACKBOX

CN7

D28 D29 D30 D13

1

CN23

CN24

SD CARD

BT1

BATTERY

1

CN25

520-6936-00A

SPIKE CPU

AMPLIFIED AUDIO

OUT

CN4 CN1

CN18

L+ LCPU NODE 0

S1

RESET

TxD NETS

DIP S2

USB CN21

SPIKE NODE BUS

CN3 CN22

NODE 0

NODE 9a

NODE 9

CN2

CN14 CN2

CN3

NODE 10a

CN2

Node Bus Cable (RJ45)

Serial Data Cable

CABINET

1

CN9

TICKET 1 LEDS INPUTS

CABINET LEFT

FLIPPER

1

CN5

CN1 520-5319-00F

Cabinet Node

CN10

1

CN8

CN7

CABINET RIGHT

SHAKER MOTOR

METER 1 METER 2 FLIPPER INPUTS LEDS

1

1 1 1

CABINET NODE 1

1

CN14

1

1

NODE 11

CN10

CN9

CN14

NODE 10

CN2

CN3

When replacing node boards, ensure DIP address switches are set correctly!

PLAYFIELD REAR

ID DIP Address Description Location Part Number

Node 0 n/a

Node 1 n/a

Node 8

Node 9 OFF-OFF-ON-OFF

SPIKE CPU Node

Cabinet Node

3.1 SPIKE NODE BOARDS

Node 10 OFF-ON-OFF-OFF Upper Playfield 48V 8-Driver Node

ID

0

1

8

9

Node 11 OFF-ON-ON

8a

9a

10a

8a n/a n/a n/a n/a n/a n/a

OFF-OFF-ON-OFF

Mid Right Playfield 32 Lighting and Switch

Trough Serial Opto Receiver Extension

ASSY Star Grid LED

ASSY Star LED Board

Trough Serial Opto Receiver Extension

Mid Playfield 48V 8-Driver Node

Backbox

Cabinet

Lower playfield

Mid playfield

Upper playfield

Backbox

Lower playfield

Lower playfield

(ball trough)

Lower playfield

520-6936-00

520-5319-00

520-6935-00

520-6935-00

520-6935-00

520-5322-00

520-5345-01

520-6969-00

520-6970-00

Lower playfield ball trough 520-5345-01

Mid playfield 520-6935-00

9a n/a

10 OFF-ON-OFF-OFF

10a n/a

11 OFF-ON-ON

Star Grid LED Extension

Upper Playfield 48V 8-Driver Node

Star LED Extension

Upper Playfield S/L I/O Node

Lower playfield

Upper playfield

Mid playfield

Upper playfield

520-6969-00

520-6935-00

520-6970-00

520-5322-00

10 KISS PRO MANUAL #500-55H1-01




3.2 DRIVER REFERENCE

.062 DEEP

.062 DEEP

BD.#11

BD.#10

SUPER

JACKPOT white

.070 DEEP

CLEAR

CLEAR

LITE

PASS

COLLECT

INSTRUMENT

ORANGE

WHITE

AMBER

EXTRA BALL

YELLOW

KISS ARMY

AMBER

LITE

BUMPER

SHOT

WHITE

YELLOW

LITE

ARMY

TARGETS

.062 DEEP

CLEAR

CLEAR

WHITE

YELLOW

ARMY

MILLIONS

O

LITE

L

CLEAR

WHITE

COLLECT

COLLECT

INSTRUMENT

ORANGE

RED

WHITE

RED

RED

RED

RED

LITE

L

O

C

ORA

NGE

ADD A

BALL

CLEAR

ROC

K C

ITY

C

K

L

O

GREEN

COLLEC

T

ORANGE

T

KISS

MILLION TARGETS

MULTIBALL

PURPLE

CLEAR

ROUT .070

SUPER

JACKPOT

CLEAR

CLEAR

LITE

CAT

BUMPER

WHITE

LITE

SPACE

BUMPER

WHITE

LITE

STAR

WHITE

LITE

DEMON

BUMPER

WHITE

WHITE

BD.#9

INSTRUMEN

ORA

NGE

T

T

YELLOW

A

YELLOW

R

YELLOW

M

YELLOW

Y

CLEAR CLEAR CLEAR CLEAR

YELLOW YELLOW YELLOW YELLOW

WHITE WHITE WHITE WHITE

.062 DEEP

DOUBLE

KISS

WHITE

ORANGE ORANGE ORANGE ORANGE

RED

.062 DEEP

.062 DEEP

WHITE

WHITE

PURPLE FILTER

BLUE FILTER

WHITE

RED FILTER

WHITE

GREEN FILTER

ROUT .125

color bar

BD.#8

COLOSSAL

BONUS

CLEAR

ROCK

AMBER

AGAIN

Figure 3.2.1. Playfield top component view





DRIVER REFERENCE CONTINUED

ID Name

1 Trough

2 Auto Plunger

6 Up Left Sling

7 Up Right Sling

8 Shaker Motor

9 Left Pop Bumper

10 Right Pop Bumper

11 Bottom Pop Bumper

12 Top Pop Bumper

15 Left Flipper

16 Right Flipper

17 Left Sling

18 Right Sling

20 Left Flipper Hold

21 Right Flipper Hold

22 Eject

23 Vertical Upkicker

24 Scoop

29 Motor-Spin Disc 1

30 Motor-Spin Disc 2

9

9

9

9

8

8

8

9

9

1

8

8

Node Connector

CN8

CN6

5

5

Ret.

Pin

CN5 3

CN7 3

CN2 1

CN6

CN8

CN7

5

5

CN10 5

CN12 5

CN5 3

3

CN12 5

8

8

CN10 5

CN9 3

8 CN11 3

10 CN5 3

10 CN7 3

10 CN9 3

10 10a-

CN9

10 10a-

CN9

1

4

5

CN3 2 31 Meter 1

32 Meter 2

33 Ticket Dispenser

1

1

Figure 3.3.1. Driver reference table.

CN4 2

CN11 3

3.3 SWITCH REFERENCE

Ret. Wire Voltage V+

Pin

ORG-GRY 48V

ORG-WHT 48V

6

6

V+ Color Location Type Address

GRY-ORG Playfield Coil - 27-1500 8-DR-5


YEL-BLU

YEL-GRY

BLU

48V

48V

48V

ORG-BLK 48V

ORG-BRN 48V

ORG-RED

ORG

48V

48V

ORG-YEL 48V

ORG-GRN 48V

ORG-BLU 48V

4 GRY-BLK Playfield Coil - 26-1200 9-DR-0


5 RED Cabinet Motor 1-DR-0

6

6



4

4

6

GRY-BLK

GRY-BLK

Playfield Coil - 26-1200 9-DR-4

Playfield Coil - 26-1200 9-DR-5




ORG-VIO 48V

YEL-ORG 48V

YEL-GRN

YEL-BLK

48V

48V

YEL-BRN

YEL-RED

48V

48V

BLU-ORG 5V

6

4

4

4




GRY-BRN Playfield Coil - 26-1200 10-DR-0

Part Number

090-5004-ND

090-5001-ND

090-5044-ND

090-5044-ND

041-5029-04

090-5044-ND

090-5044-ND

090-5044-ND

090-5044-ND

090-5083-03-ND

090-5083-03-ND

090-5044-ND

090-5044-ND

090-5083-03-ND

090-5083-03-ND

090-5044-ND

4 GRY-BRN Playfield Coil - 23-800 10-DR-1

4 GRY-BRN Playfield Coil - 23-800 10-DR-2

1 RED Playfield Motor

090-5001-ND

090-5001-ND

10-LP-41 511-5190-00

BLU-YEL

BLK

BLK

5V

12V

12V

12V

1 RED

1 RED

1 RED

1

Playfield Motor

Cabinet Digital Out

Cabinet Digital Out

Cabinet Digital Out

10-LP-42 511-5190-00

1-DR-2

1-DR-3

1-DR-4

500-9946-00

500-9946-00

Name

1

2

3

4

5

6

Return Lane L

Return Lane R

Left Outlane

Right Outlane

Left Slingshot

Right Slingshot

10 Flipper Button L

11 Flipper Button R

14 Left Orbit

15 Tournament Start

16 Trough 6

17 Trough 5

18 Trough 4

19 Trough 3

20 Trough 2

21 Trough 1

Node Node

Ext

11 -

11 -

11 -

Conn. Input

Pin

CN7 3

CN1

CN7

6

2

11 -

8

8 -

-

CN1 7

CN12 4

CN10 4

8

8

11 -

1 -

8

-

CN9 2

CN11 2

CN7

CN6

8a CN14 -

5

9

Input Wire

WHT-RED

TAN-GRN

WHT-BRN

TAN-BLU

GRY-BLU

GRY-VIO

-

GRY-BRN

GRY-RED

WHT-YEL

GRY-WHT

8

8

8

8

8

8a CN14 -

8a CN14 -

8a CN14 -

8a CN14 -

8a CN14 -

-

-

-

-

-

-

-

-

-

-

1

1

10

5

10

3

3

GND

Pin

10

10

10

-

-

-

-

-

Ground

Wire

Location

BLK-VIO Playfield

Type

Rollover

BLK-ORG Playfield

BLK-VIO Playfield

BLK-ORG Playfield

BLK-GRN Playfield

BLK-GRN Playfield

-

BLK-GRN Cabinet

BLK-GRN Cabinet

BLK-VIO Playfield

BLK-WHT Cabinet

Playfield

Rollover

Rollover

Rollover

Leaf

Leaf

Leaf

Leaf

Rollover

Micro

Opto

Playfield

Playfield

Playfield

Playfield

Playfield

Opto

Opto

Opto

Opto

Opto

Address Part Number

11-SW-1 500-9935-04

11-SW-28 500-9935-03

11-SW-0 500-9935-04

11-SW-29 500-9935-04

8-SW-7

8-SW-6

180-5231-00

180-5231-00

8-SW-2

8-SW-3

11-SW-3

1-SW-12

500-5160-01

500-5160-01

500-9935-04

180-5174-00

8a-SW-9 520-5344-00 tx

520-5345-01 rx

8a-SW-10 520-5344-00 tx

520-5345-01 rx

8a-SW-11 520-5344-00 tx

520-5345-01 rx

8a-SW-12 520-5344-00 tx

520-5345-01 rx

8a-SW-13 520-5344-00 tx

520-5345-01 rx

8a-SW-14 520-5344-00 tx

520-5345-01 rx

Continued on next page...




SWITCH REFERENCE CONTINUED

.062 DEEP

.062 DEEP

BD.#11


BD.#10

SUPER

JACKPOT white

.070 DEEP

CLEAR

COLLECT

INSTRUMENT

ORANGE

WHITE

AMBER

EXTRA BALL

YELLOW

KISS ARMY

AMBER

LITE

BUMPER

SHOT

WHITE

YELLOW

LITE

TARGETS

.062 DEEP

CLEAR

CLEAR

JACKPOT

CLEAR

CLEAR

WHITE

YELLOW

ARMY

MILLIONS

LITE

L

O

CLEAR

WHITE

COLLECT

INSTRUMENT

ORANGE

COLLECT

INSTRUMENT

ORANGE

RED

RED

WHITE

RED

RED

LITE

L

O

C

K

GREEN

RED

ORANGE

ADD A BALL

CLEAR

ROCK CITY

C

K

L

O

GREEN

COLLECT

INSTRUMENT

ORANGE

CLEAR

KISS

MILLION TARGETS

MULTIBALL

PURPLE

ROUT .070

BD.#9

ORANGE

YELLOW

A

YELLOW

R

YELLOW

M

YELLOW

Y

WHITE

LITE

DEMON

BUMPER

WHITE

LITE

SPACE

BUMPER

WHITE

LITE

STAR

BUMPER

WHITE


LITE

CAT

BUMPER

WHITE

YELLOW YELLOW YELLOW YELLOW

WHITE WHITE WHITE WHITE

.062 DEEP

DOUBLE

KISS

WHITE


RED

.062 DEEP

.062 DEEP

WHITE

WHITE

PURPLE FILTER

BLUE FILTER

WHITE

RED FILTER

WHITE

GREEN FILTER

ROUT .125

color bar

BD.#8

COLOSSAL

BONUS

CLEAR

ROCK

AMBER

AGAIN

Figure 3.3.2. Playfield switch locations (top view).






56 Right Ramp Exit

58 (A)RMY Target

59 A(R)MY Target

60 AR(M)Y Target

61 ARM(Y) Target

62 Start Button

64 Left Ramp Exit

65 Left Flipper EOS

66 Right Flipper EOS

67 Left Coin

68 Right Coin

69 Center Coin

70 Fourth Coin

71 Fifth Coin

72 Tilt Pendulum

73 Launch Button (Reserved)

76 Ticket Notch

77 Slam Tilt

C1 DIP 1

C2 DIP 2

C3 DIP 3

C4 DIP 4

C5 DIP 5

Name

22 Trough Jam

Node Node

Ext

8

Conn. Input

8a CN14 -

Pin

-

Input Wire

23 Shooter Lane

24 Right Orbit

25 (S)TAR Target

26 S(T)AR Target

27 ST(A)R Target

28 STA(R) Target

30 Left Pop Bumper

31 Right Pop Bumper

32 Bottom Pop Bumper

33 Top Pop Bumper

35 Up Left Sling

36 Up Right Sling

38 4 Bank (K)ISS

39 4 Bank K(I)SS

40 4 Bank KI(S)S

41 4 Bank KIS(S)

42 Verticual Upkicker

43 Scoop

44 Left Lock Target

45 Right Lock Target

9

9

9

9

10

10

10

10

10 -

10 -

11 -

11 -

46 Left Return Lane (R)

47 Eject

48 Spinner

11

10

10

49 Demon Entrance Opto 11 -

-

-

-

-

-

-

-

-

-

-

-

8

11 -

11 -

11 -

-

9

9

11 -

11 -

-

-

CN6

CN3

CN7

CN7

CN7

CN7

CN6

CN8

CN10 4

CN12 4

CN5 2

CN7

CN6

2

4

CN8 4

CN10 4

CN12 4

CN7

CN9

CN5

CN5

2

3

2

2

CN7

CN5

CN11 1

4

2

CN5 4

4

9

6

7

4

4

8

9

GRY-WHT

PNK-VIO

WHT-GRN

WHT-BLU

WHT-VIO

WHT-GRY

LGN-BLK

LGN-BRN

LGN-RED

LGN-ORG

LGN-YEL

LGN-BLU

WHT-BRN

WHT-RED

WHT-ORG

WHT-YEL

WHT-BLU

WHT-VIO

LGN-BLK

LGN-BRN

WHT-ORG

WHT-GRN

WHT-GRY

LGN-RED

11 -

11 -

11 -

1

1

1

1

1

1

1

1

11 -

11 -

11 -

8

8 -

-

1

1

0

0

0

0

0

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

CN3

CN1

CN1

CN1

CN1

CN6

CN3

CN5

CN7

CN5

CN5

CN5

CN5

CN5

CN6

CN7

7

2

3

4

5

10

3

2

2

9

8

CN11 5

-

CN5

-

4

-

-

-

-

7

6

5

7

8

PNK-GRN

TAN-BLK

TAN-RED

TAN-ORG

TAN-YEL

GRY

PNK-BRN

GRY-YEL

GRY-GRN

PNK-BRN

PNK-RED

-

PNK-ORG

-

WHT

PNK-BLU

-

-

-

-

-

-

LGN-RED

14

-

3

3

3

10

1

1

-

5

5

10

10

10

10

10

5

-

-

-

-

-

-

3

1

1

10

10

3

3

3

3

3

1

1

3

10

1

1

10

3

10

10

10

3

3

10

10

-

GND

Pin

-

Ground

Wire

Location

Playfield

Type

Opto

BLK-GRN Playfield Rollover

BLK-RED Playfield Rollover

BLK-VIO Playfield Leaf, Target




BLK-BRN Playfield Leaf






BLK-BLU Playfield Leaf, Target




BLK-BLU Playfield Rollover

BLK-BLU Playfield Rollover

BLK-GRY Playfield Leaf, Target

BLK-GRY Playfield Leaf, Target

BLK-VIO Playfield Rollover

BLK-BLU Playfield Micro

BLK-BLU Playfield Micro

BLK-GRY Playfield Opto

-

-

-

-

-

-

BLK-RED Playfield Micro

BLK-ORG Playfield Leaf, Target




BLK-WHT Cabinet

BLK-RED Playfield Micro

BLK-GRN Playfield Leaf

BLK-GRN Playfield Leaf

BLK

BLK

-

BLK

BLK

Cabinet

Cabinet

Cabinet

Cabinet

Cabinet

BLK-WHT Cabinet

BLK Cabinet

Cabinet

Cabinet

CPU Node

CPU Node

CPU Node

CPU Node

CPU Node

-

-

-

-

Micro

Micro

Micro

Micro

Plumb Bob

Micro



8a-SW-15 520-5344-00 tx

520-5345-01 rx

8-SW-4 180-5157-01

11-SW-23 500-9935-03

11-SW-4

11-SW-5

515-9783-00-00

515-9783-00-00

11-SW-6

11-SW-7

9-SW-4

9-SW-5

9-SW-6

9-SW-7

9-SW-0

9-SW-1

10-SW-4

10-SW-5

10-SW-6

10-SW-7

10-SW-1

10-SW-2

11-SW-8

11-SW-9

11-SW-2

10-SW-0

10-SW-3

515-9783-00-00

515-9783-00-00

180-5232-00

180-5232-00

180-5232-00

180-5232-00

180-5231-00

180-5231-00

515-9783-00-00

515-9783-00-00

515-9783-00-00

515-9783-00-00

180-5209-00

180-5057-00

515-9785-00-00

515-9785-00-00

500-9935-04

180-5186-01

180-5010-04

11-SW-10 515-0215-00 tx

515-0215-01 rx

11-SW-21 180-5087-00

11-SW-24 515-9783-00-00

11-SW-25 515-9783-00-00

11-SW-26 515-9783-00-00

11-SW-27 515-9783-00-00

1-SW-11 500-6388-44-

LED

11-SW-17 180-5087-00

8-SW-0

8-SW-1

180-5149-00

180-5149-00

1-SW-16

1-SW-18

1-SW-17

1-SW-19

1-SW-20

1-SW-14

1-SW-2

1-SW-8

1-SW-21

0-SW-0

0-SW-2

0-SW-3

0-SW-4

0-SW-5

-

-

-

-

-






ID Name

1 Start Button

2 Tournament Button

6 Left Outlane

7 Left Return Lane L

8 Left Return Lane R

9 Bonus (K)ISS

10 Bonus K(I)SS

11 Bonus KI(S)S

12 Bonus KIS(S)

13 Bonus (A)RMY

14 Bonus A(R)MY

15 Bonus AR(M)Y

16 Bonus ARM(Y)

17 Bonus Pop Starchild

18 Bonus Pop Spaceman

19 Bonus Pop Demon

20 Bonus Pop Catman

21 Bonus Inst Starchild

22 Bonus Inst Spaceman

23 Bonus Inst Demon

24 Bonus Inst Catman

25 Bonus Starchild

26 Bonus Spaceman

27 Bonus Demon

28 Bonus Catman

29 Bonus 2X

30 Bonus 3X

31 Bonus Colossal

32 Rock Again

33 Right Return Lane

34 Right Outlane

35 (K)ISS

36 K(I)SS

37 KI(S)S

38 KIS(S)

39 Extra Ball

40 KISS Army

41 Backstage Pass LT

42 Backstage Pass RT

Name

C6 DIP 6

C7 DIP 7

C8 DIP 8

C9 Service Select

C10 Service Plus

C11 Service Minus

C12 Service Back 0

C16 Power Interlock Sense 0

0

0

0

0

0

Node Node

Ext

0 -

-

-

-

-

-

-

-

3.4 LIGHT REFERENCE

-

-

-

Conn. Input

Pin

-

-

-

CN25 1

CN25 2

CN25 3

CN25 4

CN7 4

Input Wire

-

-

-

LGN-GRY

LGN-VIO

LGN-BLU

LGN-BLK

GRY-RED

11

11

11

11

1

-

-

-

GND

Pin

-

-

-

Ground

Wire

Location

CPU Node

CPU Node

CPU Node

BLK-WHT Coin Door

BLK-WHT Coin Door

BLK-WHT Coin Door

BLK-WHT Coin Door

BLK Cabinet

Type

Interlock

9

9

9

9

9

10

10

9

9

9

9

9

9

9

9

9

9

11

11

11

11

11

11

11

11

9

9

9

9

9

9

9

9

9

11

11

11

1

1

Node Node

Ext.

-

-

-

-

-

9a

9a

9a

9a

9a

9a

9a

9a

9a

Conn.

Ret.

Pin

CN6

CN6

3

2

CN8

CN8

CN8

CN14

CN14

CN14

CN14

CN14

CN14

CN14

CN14

CN14

-

-

-

-

-

-

-

-

-

8

9

BRN GRN 2/3 RED Playfield

BRN BLU 2/3 RED Playfield

10 BRN VIO 2/3 RED Playfield

-

-

-

-

-

-

-

-

-

Ret. Wire Src.

YEL BRN

YEL RED

-

-

-

-

-

-

-

-

-

Pin

1

1

-

-

-

-

-

-

-

-

-

Src.

Wire

Location

RED Cabinet

RED Cabinet

-

-

-

-

-

-

-

-

9a

9a

9a

9a

9a

9a

9a

9a

9a

9a

CN14

CN14

CN14

CN14

CN14

CN14

CN14

CN14

CN14

CN14

9a

9a

9a

9a

CN14

CN14

CN14

9a-CN3 2

9a 9a-CN3 3

10a 10a-CN8 4

10a 10a-CN8 5

-

-

-

-

-

-

-

-

-

-

-

-

-

CN8

CN8

CN8

CN8

CN6

CN6

CN4

CN4

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

ORG RED 4

ORG YEL 4

BRN YEL 8

BRN GRN 8

6

7

4

5

BRN BLK 2/3 RED Playfield

BRN RED 2/3 RED Playfield

BRN ORG 2/3 RED Playfield

BRN YEL 2/3 RED Playfield

10 ORG BLU 2/3 RED Playfield

11 ORG VIO 2/3 RED Playfield

10 ORG BLK 2/3 RED Playfield

11 ORG BRN 2/3 RED Playfield

-

-

-

-

-

-

-

-

-

-

Playfield

Playfield

Playfield

Playfield

Playfield

Playfield

Playfield

Playfield

Playfield

Playfield

-

Playfield

Playfield

Playfield

RED Playfield

RED Playfield

RED Playfield

RED Playfield

Playfield

Playfield

Playfield

Playfield

Playfield

Playfield

Playfield

Playfield

Playfield




Address

0-SW-6

0-SW-7

0-SW-8

0-SW-9

0-SW-10

0-SW-11

0-SW-12

0-SW-16

Part Number

-

-

-

180-5192-04

180-5192-02

180-5192-02

180-5192-00

180-5136-00

Type

Feature

Feature

Light

Color

White

White

Address

1-LP-2

1-LP-3

Part Number

112-5033-08

112-5033-08

Feature White 11-LP-28 520-5307-00



Feature White 9a-LP-39 520-6969-00



































15


LIGHT REFERENCE CONTINUED

.062 DEEP

.062 DEEP

BD.#11

BD.#10

SUPER

JACKPOT white

.070 DEEP

CLEAR

COLLECT

WHITE

AMBER

EXTRA BALL

YELLOW

KISS ARMY

AMBER

LITE

BUMPER

SHOT

WHITE

YELLOW

LITE

ARMY

.062 DEEP

CLEAR

SUPER

JACKPOT

CLEAR

CLEAR

LITE

CAT

BUMPER

WHITE

CLEAR

WHITE

YELLOW

ARMY

MILLIONS

LITE

O

L

CLEAR

WHITE

COLLECT

INSTRUMENT

ORANGE

COLLECT

INSTRUMENT

ORANGE

RED

RED

WHITE

RED

RED

RED

LITE

L

O

C

ORANGE

ADD A BALL

CLEAR

ROCK CITY

C

K

L

O

GREEN

COLLECT

INSTRUMENT

ORANGE

CLEAR

KISS

MILLION TARGETS

MULTIBALL

PURPLE

ROUT .070

YELLOW

A

ORANGE

WHITE

LITE

BUMPER

WHITE

LITE

STAR

BUMPER

WHITE

LITE

BUMPER

WHITE

YELLOW

R

YELLOW

M

BD.#9

YELLOW

Y


YELLOW

A

WHITE

YELLOW YELLOW

R M

WHITE WHITE

YELLOW

Y

WHITE

.062 DEEP

DOUBLE

KISS

WHITE


RED

.062 DEEP

.062 DEEP

WHITE

WHITE

PURPLE FILTER

BLUE FILTER

WHITE

RED FILTER

WHITE

GREEN FILTER

ROUT .125

color bar

BD.#8

COLOSSAL

BONUS

CLEAR

ROCK

AMBER

AGAIN


Continued on next page





ID Name

43 Rock City

44 New Track

46 BOT Pop bumper-RED

47 BOT Pop bumper-GRN

48 BOT Pop bumper-BLU

49 LT Pop bumper-RED

50 LT Pop bumper-GRN

51 LT Pop bumper-BLU

52 TOP Pop bumper-RED

53 TOP Pop bumper-GRN

54 TOP Pop bumper-BLU

55 RT Pop bumper-RED

56 RT Pop bumper-GRN

57 RT Pop bumper-BLU

58 LT Orbit Arrow-RED

59 LT Orbit Arrow-GRN

60 LT Orbit Arrow-BLU

61 Super Bumpers

62 Collect Catman Inst

64 (S)TAR

65 S(T)AR

66 ST(A)R

67 STA(R)

68 Starchild Arrow-RED

69 Starchild Arrow-GRN

70 Starchild Arrow-BLU

71 Starchild

72 Collect Starchild Inst

73 LT Ramp Arrow-RED

74 LT Ramp Arrow-GRN

75 LT Ramp Arrow-BLU

76 Spaceman

77 ARMY

78 Collect Spaceman Inst

79 Demon Arrow-RED

80 Demon Arrow-GRN

81 Demon Arrow-BLU

82 LT Lock target

83 Demon

84 RT Lock target

85 (D)EMON

86 D(E)MON

87 DE(M)ON

88 DEM(O)N

89 DEMO(N)

90 LOCK

91 Collect Demon Inst.

92 RT Ramp Arrow-RED

93 RT Ramp Arrow-GRN

94 RT Ramp Arrow-BLU

95 Super Targets

10

10

10

10

10

10

10

10

10

10

10

9

10

10

10

10

10

9

9

11

11

9

11

11

11

11

10

10

10

10

10

10

10

10

10

10

10

10

11

11

11

11

11

11

11

10

11

11

11

11

Node Node

Ext.

10 10a

Conn.

Ret.

Pin

CN14 -

-

-

-

-

10a CN14

CN4

CN4

CN4

CN2

5

6

4

-

4

-

-

-

-

-

-

-

CN2

CN2

CN4

CN4

CN4

CN2

CN2

7

8

5

6

9

7

8

-

-

-

-

-

-

-

-

-

10a CN14

10a CN14

10a CN14

10a CN14

10a CN14

10a CN14

10a CN14

10a CN14

10a CN14

10a CN14

10a CN14

10a CN14

CN2

CN6

CN6

CN6

CN6

CN6

CN6

CN8

CN10

CN12

10a 10a-CN7 7

1

10a 10a-CN7 8

10a 10a-CN7 9

10a CN14 -

10a CN14 -

10a 10a-CN7 4

10a 10a-CN7 5

10a 10a-CN7 6

10a CN14 -

10a CN14

10a CN14

10a 10a-CN7 1

10a 10a-CN7 2

-

-

10a 10a-CN7 3

10a CN14

10a CN14 -

-

7

8

1

1

1

5

6

9

4

-

-

-

-

-

-

-

-

-

-

-

-

-

Ret. Wire Src.

Pin

-

Src.

Wire

Location

Playfield

Playfield

RED YEL 2/3 RED Playfield

GRN YEL 2/3 RED Playfield

BLU YEL 2/3 RED Playfield

RED BRN 2/3 RED Playfield

GRN BRN 2/3 RED Playfield

BLU BRN 2/3 RED Playfield

RED GRN 2/3 RED Playfield

GRN 2/3 RED Playfield

BLU GRN 2/3 RED Playfield

RED ORG 2/3 RED Playfield

GRN ORG 2/3 RED Playfield

BLU ORG 2/3 RED Playfield

RED GRY 2/3 RED Playfield

GRN GRY 2/3 RED Playfield

BLU GRY 2/3 RED Playfield

ORG RED 2/3 RED Playfield

ORG YEL 2/3 RED Playfield

ORG BLK 2 YEL Playfield

ORG BRN 2

ORG RED 2

YEL Playfield

YEL Playfield

ORG YEL 2 YEL Playfield

RED BLU 10 RED Playfield

GRN BLU 10 RED Playfield

-

BLU

-

10

-

RED Playfield

Playfield

Playfield

RED VIO 10 RED Playfield

-

GRN VIO 10 RED Playfield

BLU VIO 10 RED Playfield

Playfield

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Playfield

Playfield

RED GRY 10 RED Playfield

GRN GRY 10 RED Playfield

-

-

BLU GRY 10 RED Playfield

-

-

-

-

Playfield

Playfield

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Playfield

Playfield

Playfield

Playfield

Playfield

Playfield

Playfield

Playfield

Playfield

Playfield

Playfield

Playfield




Type Light

Color




Feature Red 11-LP-8 520-6971-00

Feature Green 11-LP-9

Feature Blue

Feature Red

11-LP-10 520-6971-00

11-LP-0

520-6971-00

520-6971-00

Feature

Feature

Green

Blue

11-LP-1

11-LP-2

520-6971-00

520-6971-00

Feature Red 11-LP-11 520-6971-00

Feature Green 11-LP-12 520-6971-00

Feature Blue

Feature Red

Feature Green

11-LP-13 520-6971-00

11-LP-3

11-LP-4

520-6971-00

520-6971-00

Feature Blue

Feature Red

11-LP-5 520-6971-00

11-LP-16 520-5333-00


Feature Blue 11-LP-18 520-5333-00




Feature White 9-LP-1


520-5307-00

520-5307-00


Feature Red 10-LP-49

520-5307-00

520-5333-00


Feature Blue 10-LP-51 520-5333-00



Feature Red 10-LP-46 520-5333-00


Feature Blue 10-LP-48 520-5333-00




Feature Red 10-LP-43 520-5333-00


Feature Blue 10-LP-45 520-5333-00











Feature Red 10-LP-32 520-6970-00


Feature Blue 10-LP-34 520-6970-00


Continued on next page

17

ID Name

96 LOVE GUN

97 Lite Inst. RT ramp

98 RT Orbit Arrow-RED

99 RT Orbit Arrow-GRN

100 RT Orbit Arrow-BLU

101 RT Orbit Catman

102 RT Orbit Spaceman

103 RT Orbit Starchild

104 RT Orbit Demon

105 Catman

106 (A)RMY

107 A(R)MY

108 AR(M)Y

109 ARM(Y)

113 Sling Flash

114 Mid Pfld Flash Left

115 Pop flash

116 STAR Flash

117 Paul Flash

118 Left Ramp Flash

120 Mid Plfd Flash Rt

121 Gene Flash

122 Right Ramp Flash

123 Backpanel Flash 1 L

124 Backpanel Flash 2

125 Backpanel Flash 3

126 Backpanel Flash 4 R

132 Coin Door GI(x2)

133 Pfld GI White Lower

134 Pfld GI White Mid

135 Pfld GI White Upper

136 Coin Enable



1

10

10

1

10

10

10

10

10

10

11

10

10

10

11

11

Node Node

Ext.

10

10

10

10

10

10

10

10

10

10

10

10

10

10a

10a

10a

10a

Conn.

Ret.

Pin

CN14

CN14 -

-

10a-CN6 1

10a 10a-CN6 2

10a 10a-CN6 3

10a-CN6 4

10a 10a-CN6 5

10a CN14 -

10a CN14

10a CN14 -

-

-

-

-

-

Ret. Wire Src.

Pin

-

-

RED WHT 8

GRN WHT 8

BLU WHT 8

ORG GRY 8

ORG WHT 8

-

-

-

-

-

-

Src.

Wire

Location

Playfield

Playfield

RED Playfield

RED Playfield

RED Playfield

RED Playfield

-

RED Playfield

Playfield

Playfield

Playfield

10a CN14 -

10a 10a-CN8 1

10a 10a-CN8 2

-

BRN BLK 8

BRN RED 8

Playfield

RED Playfield

RED Playfield

-

-

10a 10a-CN8 3

10a 10a-CN8 6

CN8

CN6

BRN ORG 8

YEL GRN 8

RED Playfield

RED Playfield

11 YEL BLK 2/3 RED Playfield

9 ORG GRN 2/3 RED Playfield

-

-

-

-

-

10a 10a-CN4 2

10a 10a-CN4 1

10a 10a-CN4 3

10a 10a-CN6 6

CN6

CN8

1

1

YEL BRN 5

YEL RED 5

ORG GRN 5

RED Playfield

RED Playfield

RED Playfield

CN2 11 YEL VIO 2/3 RED Playfield

10a 10a-CN4 4 YEL ORG 5 RED Playfield

ORG BLU 8

YEL BLK 2

YEL BRN 2

RED Playfield

YEL Back Pnl

YEL Back Pnl

CN10

CN12

CN5

1

1

2

YEL RED 2

YEL ORG 2

YEL 1

YEL Back Pnl

YEL Back Pnl

YEL

WHT

Coin Door

8 CN13 1

9

10

-

-

CN13

CN13

CN8 6

1

1

WHT BLK 3

RED BLK 3

BLU BLK 3

YEL

BLK

YEL

RED

YEL

BLU

Playfield

Playfield

Playfield/

Back Pnl

BLK GRY 2 GRY

RED Coin Door

G.I.

G.I.

G.I.

Digital

Out

Flash

Flash

Flash

Flash

Flash

Flash

Flash

Flash

Flash

Flash

G.I.

Type

Feature

Light

Color

White

Address

10-LP-8

Part Number

520-6970-00


Feature Red 10-LP-52 520-5333-00


Feature Blue 10-LP-54 520-5333-00










Flash White 10-LP-63 520-6785-00

Flash

Flash

White 11-LP-31 520-6785-00

White 11-LP-21 520-6785-00

White 10-LP-36 520-6785-00

White 10-LP-35 113-5032-08

White 10-LP-37 520-6785-00

White 11-LP-7

White 10-LP-38 113-5032-08

White 10-LP-57 520-6785-00

White 10-LP-0

White 10-LP-1

520-6785-00

520-6785-00

White 10-LP-2

White 10-LP-3

White 1-LP-1

520-6785-00

520-6785-00

112-5033-08

White 8-LP-4

Red

Blue

9-LP-4

10-LP-4

1-LP-0

112-5034-08

112-5034-08

112-5034-08




ELECTRONIC PINOUTS AND SCHEMATICS

4. ELECTRONIC PINOUTS AND SCHEMATICS

4.1 SPIKE CPU NODE 0

520-6936-00

AUDIO PINOUTS

ID Type

CN18 TRS 3.5mm

Headphone

Jack

CN1 .156" 5-pin

Header

CN4 .156" 2-pin

Header

CN27 .100" 3-pin header

Pin Description Minimum

Impedance

5

1

2

1

2

3

3

4

Tip

1

2

Headphone Left

Ring Headphone Right

Sleeve Audio Ground

Speaker Right Ground

(-)

Speaker Right (+) n/c

Speaker Left Ground

(-)

Speaker Left (+)

Woofer Ground (-)

Woofer Out (+)

Line Out Left (+)

Line Out Ground

Line Out Right (-)

8 Ohms

-

8 Ohms

4 Ohms

4 Ohms

-

4 Ohms -

-

20W

4 Ohms 20W

8 Ohms

8 Ohms

600 Ohms -

-

40W

-

600 Ohms -

-

Max

Power

(RMS)

200mW

-

-

200mW

Figure 3.4.3. Audio Pinouts

1

D28 D29 D30

CN7

D13

1

CN23

CN24

1

SD CARD

BT1

BATTERY

1

CN25

LINE

OUT

520-6936-00A

SPIKE CPU

AMPLIFIED AUDIO

OUT

CN4 CN1

CN18

1

C+ CL+ L-

S1

RESET

TxD NETS

DIP S2

USB CN21

CN20

SPIKE NODE BUS

CN3 CN22

Figure 3.4.1. SPIKE CPU Node connector detail.

CONNECTORS

ID Connector Type

CN1 5-Pin .156” Header

CN3 RJ45

CN4 2-Pin .156”

Description

Backbox 2-channel amplified speaker out

SPIKE node bus - to cabinet node N1

Cabinet 1-channel amplified speaker out

CN7 5-Pin .156” Header 48V supply from main power supply

CN18 3.5mm Stereo TRS jack Headphone Jack

CN20 USB

CN21 USB

CN22 RJ45


USB connector - for software updates, audit dumps, and expansion modules

USB connector - for software updates, audit dumps, and expansion modules

SPIKE node bus - to playfield node, N8

Dot matrix display connector



5V DC and ground out to the LED display

Dedicated switch inputs - service, volume switches

COMPONENTS

ID

S1

S2

Name

Resetv Switch

DIP Switches

SD CARD For system SD card. Note: only to be removed if instructed to by

Stern Service.

BT1 CR232 3V Lithium battery for game clock between power cycles

COUNTRY CODES (DIP S2)

Country

USA

Austria

Australia

Belgium

Canada 1

Canada 2

Croatia

Denmark

Finland

France

Germany

Greece

Italy

Japan

Middle East

Netherlands

New Zealand

Norway

Portugal

Russia

S. Africa

Spain

Sweden

Switzerland

Taiwan

United Kingdom

DIP S2

1 2 3 4 5 6 7 8

OFF OFF OFF OFF OFF OFF OFF OFF

ON OFF OFF OFF OFF OFF OFF OFF

ON OFF ON ON OFF OFF OFF OFF

OFF ON OFF OFF OFF OFF OFF OFF

ON ON OFF OFF OFF OFF OFF OFF

OFF ON OFF ON ON OFF OFF OFF

OFF ON ON OFF ON OFF OFF OFF

ON OFF OFF ON OFF OFF OFF OFF

ON OFF ON OFF OFF OFF OFF OFF

OFF ON ON OFF OFF OFF OFF OFF

ON ON ON OFF OFF OFF OFF OFF

ON ON ON ON OFF OFF OFF OFF

OFF OFF OFF ON OFF OFF OFF OFF

ON OFF ON OFF ON OFF OFF OFF

ON ON ON OFF ON OFF OFF OFF

OFF OFF ON OFF OFF OFF OFF OFF

OFF OFF OFF OFF ON OFF OFF OFF

OFF ON OFF ON OFF OFF OFF OFF

ON OFF OFF OFF OFF ON OFF OFF

ON OFF OFF ON ON OFF OFF OFF

OFF OFF ON OFF ON OFF OFF OFF

OFF ON OFF OFF ON OFF OFF OFF

ON ON OFF ON OFF OFF OFF OFF

OFF OFF ON ON OFF OFF OFF OFF

OFF OFF OFF ON ON OFF OFF OFF

OFF ON ON ON OFF OFF OFF OFF

Figure 3.4.2. Country code DIP switch settings.





SPIKE CPU NODE 0 CONTINUED

STATUS LEDS

LED ID

48V

24V

9V

5V

TxD

RxD

Status

Netstat

Name

+48V Supply In

+24V Audio Power

+9V Node Bus Power

Node bus transmit

Node bus receive

System status

Network status

Color

Red

Red

Red

Red

Red

Red

Red

Red

Description

ON: Main system power is connected, OFF: No 48V system power. Check power supply connections, cables, and fuses.

ON: Audio power supply is good, OFF: Audio power supply off, call tech support.

ON: Node bus power supply is good, OFF: Node bus power supply bad, call tech support.

ON: Logic power supply is good. OFF: Logic power supply bad, call tech support.

Node bus transmit activity

Node bus receive activity

Constant double blink - game software running

Communication bridge activity

DIRECT SWITCH MAPPING (CN25)

The coin-door diagnostic switches are connected directly to the CPU node via the Cabinet Node. Note that both the CPU and

Cabinet nodes are required for diagnostic switch operation.

ID Name

C1 DIP 1

C2 DIP 2

C3 DIP 3

C4 DIP 4

C5 DIP 5

C6 DIP 6

C7 DIP 7

C8 DIP 8

C9 Service Select

C10 Service Plus

C11 Service Minus

C12 Service Back

C16 Playfield Power Interlock

-

-

CN25

CN25

CN25

CN25

CN7

-

-

-

-

-

-

Conn.

Input

Pin

-

-

-

-

-

-

4

4

2

3

-

-

1

-

-

-

-

-

-

Input Wire GND

Pin

-

-

-

-

-

-

-

-

-

LGN-GRY 11

LGN-VIO 11

LGN-BLU 11

LGN-BLK 11

GRY 5

Ground Wire Location

-

-

-

-

-

-

-

-

BLK-WHT

BLK-WHT

BLK-WHT

BLK-WHT

GRY-RED

CPU Node

CPU Node

CPU Node

CPU Node

CPU Node

CPU Node

CPU Node

CPU Node

Coin Door

Coin Door

Coin Door

Coin Door

Cabinet

Type Address Part Number

0-SW-0

0-SW-2

0-SW-3

0-SW-4

0-SW-5

0-SW-6

-

-

-

-

-

-

0-SW-7

0-SW-8

0-SW-9

-

-

180-5192-04

0-SW-10 180-5192-02

0-SW-11 180-5192-02

0-SW-12 180-5192-00

Interlock 0-SW-16 180-5136-00

COIN DOOR SERVICE SWITCH WIRING

Figure 4.1.1. Service switch wiring. Note that the Cabient Node must be present and CN10 and CN12 connected for the Coin Door

Service Switches to function correctly.





4.2 NODE 1 CABINET

520-5319-00

ID Type

CN2 .156" 5-Pin

Header

Shaker Motor

CN3 .100" 3-Pin

Header

Meter 1

CN4 .100" 3-Pin

Header

Meter 2

CN5 .100" 9-Pin

Header

CN6 .100" 14-Pin

Header

Cabinet Left

CN7 .100" 12-Pin

Header

Cabinet Right

CN9 .100" 6-Pin

Header

Dollar Bill Acceptor

4

5

6

7

8

2

3

3

1

1

2

4

5

3

1

2

Pin Description

1

2

3

Shaker Motor (-)

Shaker Motor (-)

Shaker Motor (+)

Key

Shaker Motor (+)

Meter 12V (+)

Meter (-)

N/C

Meter 12V (+)

Meter (-)

N/C

5V Out

Coin LED Out

Ground

Slam Tilt In

Coin 5

Coin 4

Coin 3

Coin 2

5

6

3

4

9

1

2

7

8

9

Coin 1

5V LED Power

Start 2 LED

Start 1 LED

Spare LED

Ground

Spare Left

Tilt Input

Door Open

Start 2 Switch

10 Start 1 Switch

11 N/C

12 N/C

13 N/C

14 N/C

1

2

5V LED Power

Plunge 2 LED

5

6

3

4

Plunge 1 LED

Spare LED 2

Ground

Spare Right In

7

8

9

Plunge 2 Switch

Plunge 1 Switch

N/C

10 N/C

11 N/C

2

3

4

5

6

12 N/C

1 Coin Enable/DBA Inhibit (-)

Coin Enable/DBA Inhibit (+)

Key

DBA 12V

Coin 6 / DBA Credit

Ground -

-

-

-

Key

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

GRY

PNK-BRN*

RED

YEL-RED

-

YEL-BRN

-

BLK-WHT

-

WHT

GRY-WHT

Wire Color

-

-

BLU

Key

RED

RED

BLK

-

RED

BLK

-

YEL-WHT

YEL

BLK

LGN-RED

PNK-GRN*

PNK-YEL*

PNK-ORN*

PNK-RED*



1

CN9

TICKET

1

CN5

1 LEDS INPUTS

CABINET LEFT

FLIPPER

CN13

1

CN1 520-5319-00F

Cabinet Node

CN10

1

1

CN8

METER 1 METER 2

CABINET RIGHT

CN7

FLIPPER INPUTS LEDS

SHAKER MOTOR

1 1 1

1

CN14

1

ID Type

CN10 .100" 6-Pin

Header

Service Switch In

CN11 .100" 5-Pin

Header

Ticket Dispenser

CN12 .100" 10-Pin

Header

CPU Direct

Switches

CN14 .156" 5-Pin Header Power Input

1

2

4

5

1

2

3

3

4

5

2

3

4

5

6

Pin Description

1 Service Back (To Coindoor)

Service Down (To Coindoor)

Service Up (To Coindoor)

LGN-BLU

LGN-VIO

Service Select (To Coindoor) LGN-GRY

Key

Wire Color

LGN-BLK

Key

Service Ground (To Coindoor) BLK

12V

N/C

Ticket Dispenser Enable

Ground

Ticket Dispenser Notch

Service Back (To CPU)

Service Down (To CPU)

Service Up (To CPU)

Service Select (To CPU)

Power Present

-

RED

WHT

BLK

BLU

LGN-BLK

LGN-BLU

LGN-VIO

LGN-GRY

LGN-ORG

3

4

5

8

9

6

7

Service Ground (To CPU)

N-C

N/C

N/C

10 N/C

1

2

Ground

Key

N/C

N/C

48VDC In

*Varies by country model

-

-

-

-

-

-

BLK-WHT

BLK

Key

GRY-YEL



4.3 LOWER PLAYFIELD 48V 8-DRIVER PINOUT NODE 8

520-6935-00

GREEN ORANGE BLACK

CN3

CN13

520-6935-00

8-Driver Node

CN14 CN12

CN1

CN11

ON

1 2 3 4

CN10

CN9

CN8

CN7

CN2

GREEN ORANGE BLACK

NEUTRAL

F1A

CN5

CN6

NEUTRAL

TOP

F1B

ID Type

SW1 Address DIP

CN2

CN3

CN4

CN5

CN6

CN7

CN8

CN9

RJ45

RJ45

.156" 5-Pin

Header Node

Power

.156" 4-Pin

Header (White)

.156" 6-Pin

Header (White)

.156" 4-Pin

Header (Black)

.156" 6-Pin

Header (Black)

.156" 4-Pin

Header (Orange)

6

1

2

3

4

4

5

2

3

1

2

5

6

3

4

1

4

1

2

3

2

3

4

2

3

-

1

4

5

1

-

-

Pin Description

Node 8 - OFF-OFF-OFF-OFF -

SPIKE Node Bus

Wire Color n/a

SPIKE Node Bus

Ground

Key

N/C

N/C

48VDC In

Switch Ground

-

-

Multi

BLK

Key

GRY

BLK-GRN

8-SW-0 Switch Return

8-DR-0 Driver Return

48V Driver Power

8-LP-0 Light Return

LED V+

Switch Ground


-

-

GRY-YEL

ORG-YEL

GRY-ORG

BLK-GRN

GRY-WHT


48V Driver Power

Switch Ground

8-SW-1 Switch


48V Driver Power

8-LP-1 Light Return

LED V+

Switch Ground

8-SW-5


48V Driver Power

Switch Ground

8-SW-2 Switch


48V Driver Power

ORG-WHT

GRY-ORG

BLK-GRN

GRY-GRN

-

ORG-GRN

GRY-ORG

-

-

-

ORG-GRY

GRY-ORG

BLK-GRN

GRY-BRN

-

YEL-ORG

CN10 .156" 6-Pin

Header (Orange)

CN11 .156" 4-Pin

Header (Green)

CN12 .156" 6-Pin

Header (Green)

CN13 .100" 3-Pin

Header

CN14 .100" 6-Pin

F1

Header, Node

Extension Bus

Fuse

3

4

1

2

5

6

1

6

1

4

5

1

2

3

2

3

4

3

4

5

-

6

1

2

2

3

8-LP-2 Light Return

LED V+

Switch Ground



48V Driver Power

Switch Ground

8-SW-3 Switch


48V Driver Power

8-LP-3 Light Return

LED V+

Switch Ground



48V Driver Power

8-LP-4 GI Return (1A Max)

GI Ground

LED V+

Ground

DIN

DOUT

SCK

RCK

V+

7A SB, 125V

-

YEL-BLK

BLK

VIO-BLK

-

VIO-RED

VIO-ORG

RED n/a

-

-

BLK-GRN

GRY-VIO

ORG-VIO

GRY-ORG

BLK-GRN

-

GRY-RED

YEL-GRN

-

-

BLK-GRN

GRY-BLU

ORG-BLU

GRY-ORG

WHT-BLK





4.4 NODE 9 MID PLAYFIELD 8-DRIVER 48V PINOUT

520-6935-00

GREEN ORANGE BLACK NEUTRAL

F1A

CN3

CN13

520-6935-00

8-Driver Node

CN14

CN1

CN11

ON

1 2 3 4

CN10

CN9

CN8

CN7 CN5

CN2

CN12 CN6

TOP

F1B

ID Type

SW1 Address DIP

CN2

CN3

CN4

RJ45

RJ45

.156" 5-Pin Header

Node Power

CN5

CN6

CN7

CN8

CN9

.156" 4-Pin Header

(White)

.156" 6-Pin Header

(White)

.156" 4-Pin Header

(Black)

.156" 6-Pin Header

(Black)

.156" 4-Pin Header

(Orange)

GREEN

6

1

2

3

4

4

5

2

3

1

2

5

6

3

4

1

4

1

2

3

4

5

1

2

3

4

-

-

1

2

3

-

Pin Description

Node 9 - OFF-OFF-ON-

OFF

SPIKE Node Bus

SPIKE Node Bus

Ground

Key

N/C

-

Wire Color

Multi

Multi

BLK

-

Key

N/C

48VDC In

Switch Ground

-

GRY

BLK-BRN

9-SW-0 Switch Return LGN-YEL

9-DR-0 Driver Return YEL-BLU

48V Driver Power

9-LP-0 Light Return

GRY-BLK

ORG-BLK

LED V+

Switch Ground

YEL

BLK-BRN

9-SW-4 Switch Return LGN-BLK


48V Driver Power

Switch Ground

9-SW-1 Switch


48V Driver Power

9-LP-1 Light Return

ORG-BLK

GRY-BLK

BLK-BRN

LGN-BLU

YEL-GRY

GRY-BLK

ORG-BRN

LED V+

Switch Ground

9-SW-5


48V Driver Power

Switch Ground

9-SW-2 Switch


48V Driver Power -

-

-

-

YEL

BLK-BRN

LGN-BRN

ORG-BRN

GRY-BLK

ORANGE BLACK

ID Type

CN10 .156" 6-Pin Header

(Orange)


(Green)


(Green)



Node Extension Bus

F1 Fuse

NEUTRAL

2

3

1

2

3

4

-

5

6

4

1

2

3

4

5

6

1

2

3

6

1

3

4

5

Pin Description

2

1 9-LP-2 Light Return

LED V+

Wire Color

ORG-RED

YEL

Switch Ground BLK-BRN

9-SW-6 Switch Return LGN-RED

9-DR-6 Driver Return ORG-RED

48V Driver Power

Switch Ground

9-SW-3 Switch


48V Driver Power

9-LP-3 Light Return

LED V+

Switch Ground BLK-BRN

9-SW-7 Switch Return LGN-ORG


48V Driver Power

9-LP-4 GI Return (1A

Max)

GI Ground

LED V+

Ground

DIN

DOUT

SCK

RCK

V+

7A SB, 125V

-

-

-

-

-

GRY-BLK

ORG-YEL

YEL

ORG

GRY-BLK

RED-BLK

YEL-RED

BLK

VIO-BLK

VIO-BRN

VIO-RED

VIO-ORG

RED n/a





4.5 NODE 10 UPPER PLAYFIELD 8-DRIVER 48V PINOUT

520-6935-00


F1A

CN3

CN13

520-6935-00

8-Driver Node

CN14

CN1

CN11

ON

1 2 3 4

CN10

CN9

CN8

CN7 CN5

CN12 CN6

CN2

ID Type

SW1

CN2

CN3

CN4

CN5

CN6

CN7

CN8

CN9

Address DIP

RJ45

RJ45

.156" 5-Pin

Header Node

Power

.156" 4-Pin

Header (White)

.156" 6-Pin

Header (White)

.156" 4-Pin

Header (Black)

.156" 6-Pin

Header (Black)

.156" 4-Pin

Header (Orange)

1

2

3

4

5

3

4

1

2

6

1

2

3

4

2

3

4

1

4

5

6

4

5

2

3

1

2

3

-

-

-

1

Pin Description

Node 10- OFF-ON-OFF-OFF

SPIKE Node Bus

SPIKE Node Bus

Ground

Key

N/C

N/C

48VDC In

Switch Ground



48V Driver Power

10-LP-0 Light Return

LED V+

Switch Ground



48V Driver Power

Switch Ground

10-SW-1 Switch


48V Driver Power


LED V+

Switch Ground

10-SW-5


48V Driver Power

Switch Ground

10-SW-2 Switch


48V Driver Power

GREEN

GRY-BRN

YEL-BLK

-

BLK-BLU

-

-

WHT-BRN

BLK-BLU

WHT-BLU

YEL-BRN

GRY-BRN

-

YEL-BRN

BLK-BLU

-

WHT-RED

-

BLK-BLU

WHT-VIO

YEL-RED

GRY-BRN

-

Wire

Color

Multi

Multi

BLK

-

Key

-

GRY

BLK-BLU

WHT-GRN

YEL-BLK

ORANGE BLACK NEUTRAL

ID Type

CN10 .156" 6-Pin

Header (Orange)

CN11 .156" 4-Pin

Header (Green)

CN12 .156" 6-Pin

Header (Green)

CN13 .100" 3-Pin

Header

CN14 .100" 6-Pin

F1

Header, Node

Extension Bus

Fuse

4

1

2

3

2

3

4

3

4

1

2

5

6

1

3

1

2

3

4

-

5

6

1

2

5

6

Pin Description


LED V+

Switch Ground



48V Driver Power

Switch Ground

10-SW-3 Switch


48V Driver Power


LED V+

Switch Ground



48V Driver Power

10-LP-4 GI Return (1A Max)

GI Ground

LED V+

Ground

DIN

DOUT

SCK

RCK

V+

7A SB, 125V

TOP

F1B

Wire

Color

-

YEL-RED

BLK-BLU

WHT-ORG

-

-

BLK-BLU

WHT-GRY

BLU-YEL

GRY-BRN

YEL-ORG

YEL

BLK-BLU

WHT-YEL

-

-

-

BLU-BLK

YEL-BLU

BLK

VIO-BLK

VIO-BRN

VIO-RED

VIO-ORG

RED n/a





4.6 NODE 11 UPPER PLAYFIELD 32-LIGHT AND SWITCH PINOUT

520-5322-00


CN10

CN2

CN7

CN4

520-5322-00

32 SW / 32 LED NODE

CN5 CN3

CN6

CN1

CN8

ON

1 2

SW1

3

CN9

CN11


ID Type

SW1 Address DIP


(White)


(Green)


(Black)

1

2

3

4

5

Pin Description

Node 11- OFF-ON-ON

+5V





-

-

Wire Color

TAN-BLK

TAN-RED

TAN-ORG

TAN-YEL

1

2

6

7

8

11-SW-28 Switch Return TAN-GRN

11-SW-29 Switch Return TAN-BLU

11-SW-30 Switch Return -

9 11-SW-31 Switch Return -

10 Switch Ground BLK-ORG

+8V

+5V

-

RED

3

4

1

2

5

6

7

8

9

6

7

3

4

5

+5V









12 Ground

8

9



10 Switch Ground

-

PNK-VIO

BLK-RED

RED

RED-BRN

GRN-BRN

BLU-BRN

RED-ORG

GRN-ORG

BLU-ORG

-

YEL-BLU

YEL-VIO

+5V


-

11-SW-17 Switch Return PNK-BRN




11-SW-21 Switch Return PNK-GRN

ID Type


(Orange)


(Orange)


(Black)

2

3

4

5

6

Pin Description

1 +8V

+5V

+5V




-

Wire Color

RED

RED

RED-YEL

GRN-YEL

BLU-YEL

7

8

9

2

3

4






12 Ground

1 +5V



-

RED-GRN

GRN

BLU-GRN

ORG-BLK

ORG-BRN

RED

LGN-BLK

LGN-BRN

11-SW-10 Switch Return LGN-RED

4

5

2

3

6

7

8

7

8

5

6





-

-

-

-

9 11-SW-15 Switch Return -

10 Switch Ground

1 +8V -

BLK-GRY

+5V

+5V









12 Ground -

RED

RED

RED-GRY

GRN-GRY

BLU-GRY

ORG-RED

ORG-YEL

ORG-GRN

ORG-BLU

ORG-VIO





NODE 11 UPPER PLAYFIELD 32-LIGHT AND SWITCH PINOUT

ID Type


(Green)


(White)

5

6

7

3

4

8

9

Pin Description

1

2

+5V









7

8

5

6

2

3

4

10 Switch Ground

1 +8V

+5V

+5V









12 Ground

Wire Color

-

WHT-BRN

WHT-RED

WHT-ORG

WHT-YEL

WHT-GRN

WHT-BLU

WHT-VIO

WHT-GRY

-

BLK-VIO

RED

RED

BRN-BLK

BRN-RED

BRN-ORG

BRN-YEL

BRN-GRN

-

BRN-BLU

BRN-VIO

YEL-BLK

ID Type

CN9 RJ45

CN10 RJ45

CN11 -

CN12 .100" 6-Pin Header,

Node Extension Bus 2

3

4

-

1

5

6

-

-

Pin Description

SPIKE Node Bus

SPIKE Node Bus

Not Used

Ground

DIN

DOUT

SCK

RCK

V+

-

-

-

-

-

-

-

Wire Color

Multi

Multi




4.7 DUAL MOTOR DRIVER

520-5338-00


4.9 TROUGH OPTO TRANSMITTER

520-5344-00

CN2

1A 250V

TIME LAG

CN3

1 ID Type


2

3

Pin Description Wire Color

1 Ground BLK

N/C

+5 VDC IN

-

RED

1

1

CN1

ID Type

CN1 .100" 6-Pin Connector

CN2 .156 5-Pin Connector 1

6

2

3

CN3 .156 6-Pin connector 1

4

5

2

3

4

5

6

3

4

5

Pin Description

1

2

Ground

PHB1

PHB0

PHA1

PHA0

V+

GND

KEY

N/C

N/C

+48 VDC IN

DRIVEB-1

Ground

DRIVEB-0

DRIVEA-1

Ground

DRIVEA-0

4.8 MAIN POWER SUPPLY

011-5001-00

ID Type Pin Description

CN1 Screw Terminal 1

2

AC Line Hot In

AC Line Neutral In

5

6

7

3

4

8

9

Earth Ground In

DC Ground

DC Ground

DC Ground

+48 V System Power

+48 V System Power

+48 V System Power

Wire Color

BLK

WHT

GRN

BLK

BLK

BLK

GRY

GRY

GRY

-

-

-

RED

BLK

-

Key

-

GRY

BRN

-

GRY

Wire Color

BLK

BLU-YEL

BLU-ORG

BLU-RED

BLU-BRN

4.10 TROUGH OPTO RECEIVER

520-5345-01

ID Type Pin Description

CN1 .100" 7-Pin Header 1 Ground

4

5

2

3

6

7

MISO Output Data

MOSI Input Data

SCK Serial Clock

RCK Register Clock

N/C

+5 VDC IN

LED

+V ADJ.

9

8

7

6

5

4

3

2

1

CN1

Wire Color

BLK

-

VIO-BLK

VIO-RED

VIO-ORG

-

RED

PINOUT





4.11 STAR LOWER PLAYFIELD GRID

LED

520-6969-00

ID Type


Node Power



7

1

2

3

4

2

3

4

5

1

5

6

2

3

4

Pin Description

1 Ground

Key

N/C

N/C

48VDC In

Ground

MISO Output Data

MOSI Input Data

SCK Serial Clock

RCK Register Clock

N/C

+5 VDC IN

Ground

LED62

LED63

+5 VDC LED Supply

Wire Color

BLK

Key

-

-

GRY

BLK

VIO-BLK

VIO-BRN

VIO-RED

-

VIO-ORG

-

RED

ORG-RED

ORG-YEL

RED

4.12 STAR UPPER PLAYFIELD LED

520-6970-00

ID Type


Node Power







5

6

3

4

7

8

1

4

5

2

3

6

2

3

5

1

5

4

6

2

3

4

Pin Description

1 Ground

Key

N/C

N/C

48VDC In

Ground

MISO Output Data

MOSI Input Data

-

-

Wire Color

BLK

Key

GRY

BLK

VIO-BLK

VIO-BRN

SCK Serial Clock VIO-RED

RCK Register Clock VIO-ORG

N/C -

2

3

7

1

4

5

1

+5 VDC IN

LED35

LED36

LED37

RED

YEL-RED

YEL-BRN

ORG-GRN

LED38 YEL-ORG

+5 VDC LED Supply RED

LED52 RED-WHT

4

5

2

3

6

7

8

1

2

8

9

6

7

3

4

5

LED53

LED54

LED55

LED56

LED57

N/C -

GRN-WHT

BLU-WHT

ORG-GRY

ORG-WHT

ORG-BLU


LED43

LED44

LED45

LED46

LED47

LED48

LED49

LED50

LED51

RED-GRY

GRN-GRY

BLU-GRY

RED-VIO

GRN-VIO

BLU-VIO

RED-BLU

GRN-BLU

BLU

10 +5 VDC LED Supply RED

1

2

LED58

LED59

BRN-BLK

BRN-RED

LED60

LED61

LED62

LED63

BRN-ORG

BRN-YEL

BRN-GRN

YEL-BLU

N/C -



LED39

LED40

LED41

LED42

Ground

BLU-BRN

BLU-RED

BLU-ORG

BLU-YEL

BLK




4.13 POWER DISTRIBUTION BOARD

520-5343-00


4.14 POWER PLUG WIRING

CAUTION

TO MAINTAIN SAFETY, GROUND WIRE FROM LINE FILTER IS

TO BE MOUNTED FIRST ON GROUNDING STUD AND SECURED

WITH NUT. ALL OTHER GROUNDS MAY THEN BE ATTACHED

TO GROUNDING STUD.

NORTH AMERICA

NORTH AMERICA

NEMA 5-15 PREWIRED OUTLET

ID Type

CN1 .156" 7-Pin

Header

CN2 .093" 3-Pin

Header

CN3 .084" 4-Pin

Header

CN4 .084" 6-Pin

Header

CN5 .084" 12-Pin

Header

FUSE

L

1

2

2

3

3

4

1

2

3

4

5

2

3

6

7

1

Pin Description

1 +48 VDC IN

+48 VDC IN

+48 VDC IN

Key

Ground

Ground

Ground

Line In (100-240 VAC)

INTERNATIONAL

Neutral

Earth Ground

+48 VDC to CPU Node

Door Interlock Switch Status

1.

3.

WHT

ALL DISCREET WIRE IS 16AWG 600V, UL 1015, CSA TYPE TEW.

2. NEMA 5-15 OUTLET HAS 14AWG 600V WIRE, UL 1015, CSA TYPE TEW.

GRY

GRY-RED

LINE FILTER

L

GROUND WIRE FROM LINE FILTER IS TO BE MOUNTED FIRST ON GROUNDING STUD

AND SECURED WITH NUT. ALL OTHER GROUNDS MAY THEN BE ATTACHED TO

GROUNDING STUD.

4. CABLE ARE TO BE MANUFACTURED IN A UL CERTIFIED FACILITY. VENDOR IS TO

PROVIDE A SIGNED U.L. CERTIFICATE OF COMPLIANCE WITH FIRST ARTICLE.

Line Voltage Status

Ground

Door Interlock Switch +48V

Wire Color

GRY

GRY

GRY

Key

BLK

BLK

BLK

BLK

*MFG NOTES:

VIO

BLK

GRY

Door Interlock Switch +48V GRY

Switched 48V Out (to Node 1) GRY-YEL

POWER DIST.

POWER DIST.

LINE FILTER

GROUNDING

STUD

POWER SUPPLY

INTERNATIONAL

GROUNDING

STUD

POWER SUPPLY

G

N

ON/OFF SW

FUSE

1.00" 2.00"

4

5

6

5

6

7

1

2

3

4

8

9

Door Interlock Return Ground GRY-RED

Door Interlock Return Ground GRY-RED

Ground (to Node 1)

Switched 48V Node Power






Node Ground

Node Ground

Node Ground

10 Node Ground

11 Node Ground

12 Node Ground

1.

Part Number

2. GROUND WIRE FROM LINE FILTER IS TO BE MOUNTED FIRST ON GROUNDING STUD

3.

BLK

GRY

GRY

GRY

GRY

GRY

BLK

BLK

BLK

BLK

BLK

BLK

LINE CORDS

ALL DISCREET WIRE IS 16AWG 600V, UL 1015, CSA TYPE TEW.

034-6012-02

034-6012-03

034-6012-04

034-6012-05

034-6012-06

034-6012-07

034-6012-08

034-6012-09

LINE FUSES

Description

ON/OFF SW

Line Cord, 3m, CEE77P EUROPE

Line Cord, 3m, AS-NZS4417P Australia

Line Cord, 3m, CEI23-16P Italy

Line Cord, 3m, SEV1011P Switzerland

Line Cord, 3m, JIS8303P Japan

Line Cord, 3m, SI32P Israel

Line Cord, 3m, BS546P S Africa, India

Line Cord, 3m, IS6538P S. India

1.00" 2.00"

Line Cord, 3m, BS1363P United Kingdom

1:1

05/02/14

05/02/14

1:1

AC WIRING DIAGRAM-N. AMERICA

SPIKE BB

SPIKE BB

XXX-XXXX-XX

XXX-XXXX-XX

Figure 4.13.1. Power Distribution Board 520-5343-00 pinout



Line Voltage (Region)

120V (North America)

220/240v (Europe, Australia,

UK)

Fuse

Current

8 A

5 A

Type Part Number

Slow Blow MDL 200-5000-05

Slow Blow MDL 200-5000-01

Figure 4.14.1. Standard fuses for line connections, 120V and

240V


PARTS REFERENCE

5. PARTS REFERENCE

5.1 PLAYFIELD RUBBER PARTS

3

2

2

4

4

5 5

8

5

5

5

5

5

3

5

2

5

1

1

RUBBER O-RINGS

4

5

3

7

8

6

2

ID Qty Size (ID) Size (OD) Durometer Color Part Number

1 4 3/16" 50 Black 545-5348-01

2

3

3

3/8"

7/16"

3/4"

50

50

50

Black 545-5348-03

Black 545-5348-18

Black 545-5348-04

4

9

1

1

1"

1-3/4"

2"

7/16"

50

50

50

50

Black 545-5348-05

Black 545-5348-21

Black 545-5348-08

Black 545-5348-17

Figure 5.1.1. Rubber o-ring part numbers and usage. ID: Inner

Diamter, OD: Outer Diameter, Durometer: Higher number is firmer, less bounce, and more durable.

ID Qty Description

11 3

12 2

Plunger Tip

Flipper Rubber

Color Part Number

Black 545-5276-00

Black 545-5277-00

13 6

15 2

Bumper Pad (Sub assemblies)

Bumper Pad (Flippers)

Black 545-5105-00

Black 545-5428-00

Figure 5.1.4. Other rubber part numbers and usage

5.2 RUBBER SIZE CHART

3-1/2”

3”

2-3/4”

2-1/2”

2”

1-3/4”

1-1/2”

1-1/4”

1”

3/4”

1 1

5

4 4

12 12

Figure 5.1.3. Rubber o-ring part locations

30

11

3/8”

5/16”

3/16”

7/16” OD

7/16” 3/8” OD

Figure 5.1.2. Rubber ring inner diameter sizing tool. Hold ring up to chart and read largest size on inside of ring. Dimensions are Inner Diameter (ID) unless otherwise noted as Outer Diamter (OD).




PARTS REFERENCE

5.3 PLAYFIELD ASSEMBLIES, TOP

17

6/10

6/7

22

6/9

19

6/8

11

18

20

13

14

16

17

22

ID Part Number Description

1 500-6005-H1 Bottom Arch Assembly

2 755-51H1-12-Y Instruction Card

3 755-5400-12-Y Coin Card (USA)

4 515-5133-06-06 Flip Bat -Yellow

5 545-5277-10

6 516-0033-BRD

Flipper Rubber -Black

Pop Top Prime Assembly

7 550-7400-H1-SM Hot-Stamped Bumper Cap -Space Man 1

8 550-7400-H1-DM Hot-Stamped Bumper Cap -Demon 1

9 550-7400-H1-SC Hot-Stamped Bumper Cap -StarChild

10 550-7400-H1-CM Hot-Stamped Bumper Cap -Cataman

1

1

11 500-9954-00

12 535-1164-00

13 535-1182-00

Left Plastic Ramp Assembly

Left Wire Ramp

Vuk Snubber

14 500-9952-00

15 535-1165-00

Right Ramp Assembly

Right Wire Ramp

16 511-7655-00-GE Spinner Assembly Left Hand

17 511-5240-01-SPI Spotlight Flash LED

18 511-7677-00

19 511-7676-00

20 510-7534-01

21 550-5031-02

22 550-5032-07

Gene Head and Plate Assembly

Paul Assembly

Riveted Assembly Head Trough

Mini Mars (Red)

Hat (Orange)

1

1

1

2

2

1

2

1

1

1

1

1

2

2

4

1

1

1

Qty

12 15

21 21

4

5 5

4

2

3

1

Figure 5.3.1. Major playfield assemblies, Top locations.




PARTS REFERENCE

5.4 PLAYFIELD ASSEMBLIES, BOTTOM

3

6

4

3

2

4

5

1

ID

1

2

3

4

5

6

11

12

13

14

15

16

17

7

8

9

10

Part Number Description

500-9818-00 Auto-Plunger

500-9820-4BALL 4-Ball Trough Assembly

500-7172-00 Playfiled Supports

500-9920-01 SlingShot Assembly

500-6543-82-ND Flip Asssembly RT with Coil 090-5083-03-

ND

500-6543-83-ND Flip Asssembly LT with Coil 090-5083-03-

ND

500-9907-00-00 1/2" S/U Target Anti-Sway/ND

500-9904-00-00 1" SQ Target S/U AntiLoft/Light/ND

515-6459-04-ND Pop Bumper Bottom Assy 26-1200

500-9934-01 Pop Bumper SW Assembly -LT

500-6697-00-ND Kicker-Lugs Up Assembly

500-9812-ND Power Scoop Assy with no diode

500-9920-01-RT Slingshot Assembly 26-1200 Right

500-6511-01-ND 30Degree Eject assy 26-1200

500-6520-ND 30Degree Eject Switch

500-9965-00

500-7144-03

Up-Post VUK

Spinning Disk Assembly

2

1

1

1

1

1

1

4

4

2

12

Qty

1

1

1

2

1

1

8

8

8

8

11

8

8

8

8

12

9/10

9/10

9/10

9/10

13

8

8

8

8

13

14/15

7

17

7

16

Figure 5.4.1. Major playfield assemblies, Bottom locations.




PARTS REFERENCE

5.5 BACKBOX PARTS

4

9

3

3

1 2

6

5

1

2

7

3

6

5

4

8

Figure 5.5.1. Backbox external assemblies and components

EXTERNAL

ID Part Number Description

1830-52H1-00 Translite Art

1 830-52H1-GER Translite Art (Germany)

2 660-5038-02 Back Glass

3 545-5018-14

4 545-5018-15

5 545-6313-01

6 500-9854-H1

820-66H1-01

Plastic Extrusion 18-1/8"

Glass Channel 26"

Glass lift Channel 26"

Speaker Panel Assembly

Side Panel Decal 1

820-66H1-01G Side Panel Decal 1 (Germany)

820-66H1-02 Side Panel Decal 2

820-66H1-02G Side Panel Decal 2 (Germany)

1

1

1

2

1

1

1

1

Qty

1

5.6 SPEAKER PANEL PARTS

500-9854-H1

ID PART NUMBER DESCRIPTION

1 515-9763-00

2 031-5004-02

3 040-5000-03

SPEAKER PANEL KISS PRO

SPEAKER

1/4" CABLE CLAMP

4 545-7849-00

5 545-7856-00

6 545-7877-00

7 520-5052-15

8 254-5000-09

DISPLAY LENS

FISCHE PAPER: LED DISPLAY

FISCHE PAPER

LED DISPLAY

NYLON SPACER - BLACK - 3/8 OD X .175 ID

X 1/4"

SPEAKER GRILL 9 535-8081-01

10 240-5008-00

11 242-5001-00

12 820-8369-H1

6-32 KEPS NUT

#6 WASHER

DECAL: SPEAKER PANEL, KISS PRO

2

14

8

1

1

1

1

1

6

QTY.

1

2

3

Figure 5.5.2. Backbox internal assemblies and components

INTERNAL

ID Part Number

1 515-6957-10

2 520-5343-00

3 011-5001-00

4 515-9769-00

5 205-5001-00

6 535-0772-00

7 535-0879-01

8 535-0879-00

9 355-5168-00

10 180-5001-03

034-6012-00

Description

CPU Node Board -10 w/ LCD Adapter

Power Distribution Board

Power Supply 48V/320W

Utility Outlet (USA)

Fuse Holder-Screw in

Cover AC

Power supply bracket

Power supply bracket

Backbox Lock, 5/8 in

Power Switch

Line Cord-3M 5-15P/C13RA*

1

1

1

1

1

Qty

1

1

1

1

1

1

3 5 7 8 4 10 11 6 2 9 1 12




NO. PART NUMBER

1

4

5

2

3

515-9763-00

031-5004-02

8

9

6

7

040-5000-03

545-7849-00

545-7856-00

545-7877-00

520-5052-15

254-5000-09

535-8081-01

10 240-5008-00

11 242-5001-00

12 820-8369-H1

DESCRIPTION

SPEAKER PANEL DINNER TIME PRO & PREMIUM

SPEAKER

1/4" CABLE CLAMP

DISPLAY LENS

FISCHE PAPER: LED DISPLAY

FISCHE PAPER

LED DISPLAY

NYLON SPACER - BLACK - 3/8 OD X .175 ID X 1/4"

SPEAKER GRILL

6-32 KEPS NUT

#6 WASHER

DECAL: SPEAKER PANEL, STAR PRO

QTY.

1

6

1

1

3

1

1

2

2

14

8

1

22

12

ITEM NO. PART NUMBER DESCRIPTION QTY.

ITEM NO. PART NUMBER

29

30

31

32

25

26

27

28

21

22

23

24

17

18

19

20

33

34

35

13

14

15

16

9

10

11

12

7

8

5

6

3

4

1

2

525-5844-00

DESCRIPTION

500-5026-32 FLIPPER BUTTON ASSY (RED)

501-5018-173 COIN DOOR 2-CHUTE NO EMBOSS

180-5160-01 SINGLE FLIPPER SWITCH


180-5160-00 FLIPPER SWITCH, DOUBLE

355-5038-00 DRAW LATCH, OVER CENTER CLAMP

545-5072-03 GRILL - SPEAKER / VENT


031-5007-01 SPEAKER, CABINET 8" ROUND, 4 OHM

545-5090-00 CASH BOX - PLASTIC

535-5013-03 CASH BOX COVER

535-7562-00 CASH BOX LOCK BRACKET

535-7772-00 HAIR PIN CLIP

500-5921-XX LEG ASSEMBLY

535-5221-00 HANGER WIRE BRACKET

535-5319-01 HANGER WIRE 4.3"

535-7563-01 TILT CONTACT WIRE

820-66G1-03 DECAL, CABINET LEFT, DUDES PRO

820-66G1-04 DECAL, CABINET RIGHT, DUDES PRO

820-66G1-05 DECAL, CABINET FRONT, DUDES PRO

660-5001-00 PLAYFIELD GLASS

9

10

7

8

5

6

3

4

1

2

525-5844-00

1

1

1

1

1

1

1

2

2

2

2

1

2

1

1

2

1

1

1

2

1

1

PARTS REFERENCE

5.7 CABINET PARTS

535-5989-00 SLIDE & PIVOT BRACKET - LEFT SIDE

535-0399-00 CABINET BRACKET, PF SUPPORT

535-7999-01 PIVOT HINGE, RIGHT - BLACK

254-5042-00 SPACER NUT, HEX, 1/2"OD, 1/4-20

CABINET, STANDARD FOR SPIKE SYSTEM BACK BOX

(PLUNGER & TWO ILLUMINATED BUTTONS)



535-7999-00 PIVOT HINGE, LEFT - BLACK


254-5042-00 SPACER NUT, HEX, 1/2"OD, 1/4-20

242-5084-00 WASHER, 1/2" I.D., 3/16" THK

231-5014-00 1/4-20 X 7/8" CARRIAGE BOLT

545-5017-00 PLASTIC CHANNEL

545-5038-00 GLASS CHANNEL REAR EXTRUSION

535-7297-02 SIDE ARMOR - BLACK WRINKLE

500-6146-00-07 BALL SHOOTER ASSEMBLY

13

14

15

21

22

23

24

17

18

19

20

25

26

535-5027-01 PLUNGER SUPPORT PLATE, NOTCHED

33

34

35

29

30

31

32

QTY.

13

14

15

16

9

10

11

12

7

8

5

6

3

4

1

2

21

22

23

24

17

18

19

20

DESCRIPTION

29

31

32

525-5844-00

CABINET, STANDARD FOR SPIKE SYSTEM BACK BOX

(PLUNGER & TWO ILLUMINATED BUTTONS)


535-5990-00 SLIDE & PIVOT BRACKET - RIGHT SIDE


500-6882-03-00 FRONT MOLDING ASSEMBLY, LATCHED - BLACK

535-7999-00 PIVOT HINGE, LEFT - BLACK


254-5042-00 SPACER NUT, HEX, 1/2"OD, 1/4-20

242-5084-00 WASHER, 1/2" I.D., 3/16" THK

231-5014-00 1/4-20 X 7/8" CARRIAGE BOLT

545-5017-00 PLASTIC CHANNEL





500-5026-32 FLIPPER BUTTON ASSY (RED)









QTY.

1

1

1

535-5319-01 HANGER WIRE 4.3"

1

1

1







500-6882-03-00 FRONT MOLDING ASSEMBLY, LATCHED - BLACK









535-5013-03 CASH BOX COVER

535-7562-00 CASH BOX LOCK BRACKET

535-7772-00 HAIR PIN CLIP

500-5921-XX LEG ASSEMBLY

535-5221-00 HANGER WIRE BRACKET

535-5319-01 HANGER WIRE 4.3"

535-7563-01 TILT CONTACT WIRE

820-66G1-03 DECAL, CABINET LEFT, DUDES PRO

820-66G1-04 DECAL, CABINET RIGHT, DUDES PRO



1

1

1

1

1

4

1

1

1

1

1

1

1

35

ID Part Number

1

2

3

4

2

10

29

30

27

19

21

525-5844-00

535-5989-00

535-5990-00

535-0399-00

6 535-7999-00

2

1

1

1

1

1

2

1

1

1

2

2

1

2

1

1

1

1

4

1

1

1

1

1

1

1

5

SLIDE & PIVOT BRACKET - RIGHT SIDE

CABINET BRACKET, PF SUPPORT

5 500-6882-03-00 FRONT MOLDING ASSEMBLY - NO HOLE -

Black

22

Description

31

CABINET, KISS

7

12

35

(PLUNGER & TWO BUTTONS)

SLIDE & PIVOT BRACKET - LEFT SIDE

2

29

30

10

23

24

9

27

8

19

26

16

14

34

7 535-7999-01

8 254-5042-00

9 242-5084-00

10 231-5014-00

11 545-5017-00

12 545-9802-00

13 535-7297-02

PIVOT HINGE, RIGHT - Black

SPACER NUT, HEX, 1/2"OD, 1/4-20

WASHER, 1/2" I.D., 3/16" THK

1/4-20 X 7/8" CARRIAGE BOLT

PLASTIC CHANNEL

GLASS REAR EXTRUSION

SIDE ARMOR- BLACK WRINKLE

14 500-6146-00-07 BALL SHOOTER ASSEMBLY

15 535-5027-01

16 500-5026-32

17 501-5018-173

18 180-5160-01

13

PLUNGER SUPPORT PLATE, NOTCHED

FLIPPER BUTTON ASSY (Red)

COIN DOOR 2-CHUTE NO EMBOSS

FLIPPER SWITCH, Single

20 355-5038-00

21 545-5072-03

22 545-5072-02

23 031-5007-01

24 545-5090-00

25 535-5013-03

DRAW LATCH, OVER CENTER CLAMP

GRILL - SPEAKER / VENT

GRILL - SPEAKER / VENT

SPEAKER, CABINET 8" ROUND, 4 OHM

CASH BOX - PLASTIC

CASH BOX COVER

21

3

1

1

1

1

1

4

1

1

1

1

1

1

1

1

1

1

2

1

1

1

2

2

1

2

1

2

2

1

2

1

1

1

1

1

1

1

1

1

1

1

2

2

2

1

1

2

1

1

2

2

1

1

1

1

2

1

1

2

18

Qty

1

33

25

5

13

15

22

31

1

7

34

12

35

4

11

2

29

30

20

10

13

27

19

23

26

16

14

24

9

8

21

3

18

25

33

5

13

15

31

1

6

7

4

28

32

ID Part Number

26 535-7562-00

27 535-7772-00

Description

CASH BOX LOCK BRACKET

HAIR PIN CLIP

28 500-5921-XX

29 516-0007-00

32

LEG ASSEMBLY - BLACK

TILT ASSEMBLYv

DECAL, CABINET LEFT, KISS

820-66H1-03G DECAL, CABINET LEFT, KISS (GERMANY)

33 820-66H1-04 DECAL, CABINET RIGHT, KISS

820-66H1-04G

34 820-66H1-05

DECAL, CABINET RIGHT, KISS (GERMANY)

DECAL, CABINET FRONT, KISS

820-66H1-05G DECAL, CABINET FRONT, KISS (GERMANY)

35 660-5001-00 PLAYFIELD GLASS

11

20

13

4

1

1

Qty

1

1

1

1

1

23

26

16

14

24

9

8

3

18

25

15

6

4

28

32

20

13




4

3

11

10

7

6

8

5.9 BALL TROUGH ASSEMBLY

500-9820-00

PARTS REFERENCE

5.8 AUTO LAUNCH ASSEMBLY

500-9818-00

10 11

1 2

7

1

2

8

2

9

9

9

13

14

12

7

17

12

5

8

3

4

11

5

9

6

13

18

4

10

7

16

3

9

6

2 7

1

1

11

8

2

10

9

14

17

9

13

7

12

17 17

9

ID Part Number

1

4

515-9689-00

2 535-0728-00

3 270-5001-00

4 545-5352-00

5

3

090-5001-ND

6 545-5411-00

7

12

8 530-7834-00

9 232-5300-00

10 530-7835-00

11 545-5423-00

12 237-5937-02

13 535-6539-00

14 180-5157-01

15 545-6268-00

16 535-0762-00

17 515-6304-03

18 545-0762-00

11

10

7

6

Description

MAIN BRKT: AUTO-PLUNGER

KICKER ARM, AUTO-PLUNGER

RETAINING E-RING, 3/16" SHAFT OD

NYLINER, 3/16" SHAFT

COIL - 23-800, NO DIODE

COIL SLEEVE

COMPRESSION SPRING-CONICAL

PIVOT, AUTO-PLUNGER

NYLINER, 1/4" SHAFT, 4L1-FF

SWITCH BODY PROTECT PLATE

FISCHE PAPER

COIL BRACKET-AUTOPLUNGER

4

PLUNGER / LINK ASSEMBLY

FISCHE PAPER: AUTO-LAUNCHER

13

Figure 5.8.1. Auto Launch Assembly 500-9818-00 bill of materials.

9

17

1

4

1

1

1

1

2

1

1

1

Qty

1

1

8

1

1

1

1

1

1



5

ID Part Number

1 515-7811-00

2 515-7812-00

3 237-5975-04

4 266-5020-00

5 535-5203-03

6 3

7 240-5102-00

Description

16

18

MAIN BRKT. BALL TROUGH

COIL BRACKET, BALL TROUGH

SCREW, 8-32 X 1/4" HWH SWAGE SERR


COIL RETAINING BRACKET

COIL SLEEVE

8-32 NYLON LOCK NUT

8

9

545-5105-00

515-7309-01

10 237-5909-00

11 520-5344-00

12 520-5345-00

13 090-5004-ND

98* 605-5006-00

RUBBER BUMPER

PLUNGER ASSEMBLY

SCREW, 4-40 X 1/4" PPH SEMS 4

TROUGH BOARD #1 - ILED TRANSMITTER 1

1

1

TROUGH BOARD #2 - RECEIVER

COIL 27-1500 - NO DIODE

SHRINK TUBING 1/8"

99* 036-5611-11-F5 CABLE TROUGH OPTOS

1

1

.42

FT.

1

1

1

4

2

1

Qty

1

1

Figure 5.9.1. Ball trough assembly - 500-9820-00 bill of materials.


9

7

17

5

1

16

12

13

14

9

18

PARTS REFERENCE

5.10 FLIPPER ASSEMBLY, LEFT

LOWER: 500-6543-83-ND

UPPER: 500-6543-15-ND

2 1

5.11 FLIPPER ASSEMBLY, RIGHT

500-6543-82-ND

1 2

5 5

4 3 3 4

6 6

8 8

7 7

9 9

13 13

13 13

14

10

11

Figure 5.10.1. Left flipper assembly 500-6543-02-ND bottom view.

ID Part Number

1 515-6617-01

2 515-6308-01

3 180-5149-00

Description

FLIPPER BASE PLATE LEFT KIT W/ BRACKET

MOUNT HARDWARE

COIL STOP BRACKET

SWITCH - END OF STROKE N/C

4* 090-5083-03-ND COIL-DUAL WINDING (500-6543-83-ND)

4 090-5062-ND COIL-SINGLE WINDING (500-6543-15-ND)

5 269-5002-00

6 535-7354-00

7 265-5035-00

8 535-7356-00

9 545-5388-00

10 545-5070-00

11 545-5428-00

SPRING WASHER

SWITCH RETURN SPRING BRACKET

SPRING FLIPPER RETURN

COIL SUPPORT BRACKET

COIL SLEEVE, FLIPPER

FLIPPER BAT BUSHING

FLIPPER BUMPER PAD

12 237-6144-00

13 515-7203-01

14 515-5133-06

SET SCREW #10-32 x 3/4" SOCKET

PLUNGER/CRANK ASSEMBLY, LEFT

FLIPPER BAT AND SHAFT (500-6553-83-ND)* 1

1

1

1 14 515-6275-08-01 FLIPPER BAT AND SHAFT RED MINI (500-6543-

15-ND Assy)*

500-6307-10 FLIPPER REBUILD KIT, LEFT

* Refer to game rubber chart for flipper rubber color and part number.

1

1

1

1

1

1

1

1

1

1

1

Qty

1

14

10

11

Figure 5.11.1. Right flipper assembly 500-6543-12-ND bottom view.

ID Part Number

1 515-6617-00

Description

FLIPPER BASE PLATE RIGHT KIT W/ BRACKET

MOUNTING HARDWARE

2 515-6308-01

3 180-5149-00

COIL STOP BRACKET

SWITCH - END OF STROKE N/C

4 090-5083-03-ND COIL-DUAL WINDING

5 269-5002-00

6 535-7354-00

7 265-5035-00

8 535-7356-00

9 545-5388-00

10 545-5070-00

11 545-5428-00

12 237-6144-00

13 515-7203-00

14 515-5133-06

500-6307-00

SPRING WASHER

SWITCH RETURN SPRING BRACKET

SPRING FLIPPER RETURN

COIL SUPPORT BRACKET

COIL SLEEVE, FLIPPER

FLIPPER BAT BUSHING

FLIPPER BUMPER PAD

SET SCREW #10-32 x 3/4" SOCKET

PLUNGER/CRANK ASSEMBLY

FLIPPER BAT AND SHAFT*

FLIPPER REBUILD KIT, RIGHT

* Refer to game rubber chart for flipper rubber color and part number.

Qty

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Figure 5.11.2. Left flipper assembly 500-6543-83-ND BOM

36

Figure 5.11.3. Right flipper assembly 500-6543-82-ND bill of materials.




Figure 5.11.1. Right flipper assembly 500-6543-12-ND bottom view.

5.12 SLING SHOT ASSEMBLIES

500-9920-01-D7

4

3

12

11

10

9

8

5

7

6

2

1

Figure 5.12.1. Sling shot core assembly explosion.

PARTS REFERENCE

5.13 SLINGSHOT FLASH ASSY - 02

511-7641-02

500-9924-00

"RIGHT"

3

500-9924-01

"LEFT"

4

5

2

2

3

4


1 830-7028-02 BUTYRATE SET - 02

5

550-5031-02 MINI MARS W/ EARS - RED SB

520-6785-00 FLASH LAMP PCB

237-5813-00 SCREW, 4-40 X 1/2" PPH SEMS

240-5303-00 4-40 NYLON LOCK NUT

1

5.14 SLINGSHOT FLASH ASSY- 04

511-7641-04

ITEM

NO. PART NUMBER

1 515-5339-01

2 090-5044-ND

3 545-5031-00

4 535-5203-03

5

6

7

8

232-5301-00

180-5231-00

535-5045-00

237-5976-04

DESCRIPTION

ITEM

NO. PART NUMBER

3

4

1

2

5

SLING SHOT BRKT ASSY

COIL - 26-1200, NO DIODE

COIL SLEEVE


SCREW, 8-32 X 3/8" PPH

830-7028-02

550-5031-02

520-6785-00

237-5813-00

240-5303-00

SEMS

SLING SHOT SWITCH - 2 LUG

- STANDARD LUGS

SWITCH PLATE

SCREW, 6-32 X 5/8" HWH

9 515-5340-01

10 270-5002-00

11 515-5338-00

12 266-5020-00

QTY.

SWAGE

ARM & TIP ASSY

2

RETAINING RING - 1/4"

PLUNGER & LINK ASSEMBLY 1

1

2

COMPRESSION SPRING-

CONICAL

1

1

1

1

1

BUTYRATE SET - 02

2

MINI MARS W/ EARS - RED SB

FLASH LAMP PCB

1

QTY.


4-40 NYLON LOCK NUT 2

1

1

1

2

Qty

1

1

1

2

2

6

7

4

1

ITEM

NO. PART NUMBER

1 830-7028-04

2 550-5031-02

3 520-6785-00

4 237-5813-00

5 240-5303-00

6 237-5506-00

7 254-5000-14

8 240-5005-00

DESCRIPTION QTY.

BUTYRATE SET - 04

MINI MARS W/ EARS - RED SB

FLASH LAMP PCB

SCREW, 4-40 X 1/2" PPH SEMS

4-40 NYLON LOCK NUT

SCREW, 6-32 X 1" PPH MS

NYLON SPACER - BLACK - 3/8 OD X .175 ID X 5/8" 1

6-32 NYLON STOP NUT 1

1

2

1

1

2

1

2

Figure 5.12.2. 500-9920-01-D7 sling shot assembly.

ID Part Number

1 515-5339-01-D7 SLING SHOT BRKT ASSY WHOA NELLIE

2 090-5044-ND COIL - 26-1200, NO DIODE

3

4

545-5031-00

535-5203-03

5 232-5301-00

6 180-5231-00

Description

COIL SLEEVE



SLING SHOT SWITCH - 2 LUG - STANDARD

LUGS

7 535-5045-00

8 237-5976-04

9 515-5340-01

10 270-5002-00

11 515-5338-00

12 266-5020-00

SWITCH PLATE

SCREW, 6-32 X 5/8" HWH SWAGE

ARM & TIP ASSY

RETAINING RING - 1/4"

PLUNGER & LINK ASSEMBLY


Figure 5.12.3. Sling shot 500-9924-00, -01 bill of materials.



2

1

1

1

Qty

1

1

1

2

1

2

2

1

3

8

5


1 830-7028-04 BUTYRATE SET - 04

2 550-5031-02 MINI MARS W/ EARS - RED SB

3 520-6785-00 FLASH LAMP PCB

4 237-5813-00 SCREW, 4-40 X 1/2" PPH SEMS

5 240-5303-00 4-40 NYLON LOCK NUT

6 237-5506-00 SCREW, 6-32 X 1" PPH MS

7 254-5000-14 NYLON SPACER - BLACK - 3/8 OD X .175 ID X

5/8"

8 240-5005-00 6-32 NYLON STOP NUT

2

1

1

2

1

Qty

1

1

1


1

ITEM NO. PART NUMBER

1

DESCRIPTION

535-1192-00 BRACKET, UP-POST VUK, STAR

10

11

97*

98*

99*

8

9

6

7

4

5

2

3

090-5001-ND COIL - 23-800, NO DIODE

545-5076-01 COIL SLEEVE

515-9835-00 PLUNGER ASSEMBLY, UP-POST VUK, STAR

266-5047-00 COMPRESSION SPRING, POP BUMPER COIL

535-5203-03 COIL RETAINING BRACKET

232-5300-00

180-5209-00

535-6539-00 SWITCH BODY PROTECT PLATE

237-5937-02 SCREW, 2-56 X 1/2" HWH MS

545-5105-00 RUBBER BUMPER

605-5002-00 SHRINK TUBING 1/8" BLACK

605-5006-00 SHRINK TUBING 1/8"

036-6246-00

PARTS REFERENCE

5.15 POWER SCOOP

500-9812-ND

* ITEM NOT SHOWN

QTY.

1

1

1

1

2

1

1

2

1

1

1

.083 FT.

.083 FT.

1

1

2

8

3

2

500-9965-00

UP-POST VUK ASSEMBLY

8

3

5.16 UP-POST VUK ASSEMBLY

550-9965-00

9

6

3

2

10

8

7

5

1

4

11

4 5

6

4

7

7

2

3

4


1 515-9659-00 POWER SCOOP WELDMENT, PRO

535-6173-00

232-5209-00

180-5057-00

MICRO-SWITCH BRACKET


MICRO-SWITCH

7

8

5

6

535-6539-00

237-5806-00

244-5001-00

240-5301-00

SWITCH BODY PROTECT PLATE

SCREW, 2-56 X 1/2" PPH MS ZINC

#2 LOCK WASHER, SPLIT

2-56 HEX NUT

99* 036-5544-01 3" CABLE GENERIC SWITCH

5

6

1

2

1

Qty

1

2

2

1

2

1

3

4

ID

1

2

5

Part Number Description

535-1192-00 BRACKET, UP-POST VUK, STAR

090-5001-ND COIL - 23-800, NO DIODE

545-5076-01 COIL SLEEVE

515-9835-00 PLUNGER ASSEMBLY, UP-POST VUK,

STAR

266-5047-00 COMPRESSION SPRING, POP BUMPER

COIL

Qty

1

1

1

1

1

6

7

8

535-5203-03 COIL RETAINING BRACKET

232-5300-00 SCREW, 8-32 X 1/4" PPH SEMS

180-5209-00 SUB MINIATURE SWITCH - SIM. ROLLER 1

1

2

9

10

535-6539-00 SWITCH BODY PROTECT PLATE

237-5937-02 SCREW, 2-56 X 1/2" HWH MS

11 545-5105-00 RUBBER BUMPER

97* 605-5002-00 SHRINK TUBING 1/8" BLACK

98* 605-5006-00 SHRINK TUBING 1/8"

99* 036-6246-00 CABLE, GENERIC COIL W/ SWITCH

1

2

1

.083 FT.

.083 FT.

1




PARTS REFERENCE

5.17 POP BUMPER ASSEMBLY

516-6784-XX

1

2

13

13

19

15

3

21

16

4

17

9

10

8

7

5

6

Part Number

515-6459-01L

Description

BUMPER/RING TOP ASSY, W/ LED 1

515-6459-04-ND BUMPER BOTTOM ASSY, NO DIODE

Qty

1

1

Figure 5.17.2. 516-6784-XX Pop bumper assy major subassemblies.

19

ID Part Number

1 520-5307-03

3 545-5197-00

4 515-5085-00

5 266-5048-00

6 545-5195-00

7 545-5607-00

Description

POP BUMPER LED MODULE

BUMPER BODY

RING AND ROD ASSY

BUMPER SKIRT COMP SPRING

BUMPER BASE

BUMPER SKIRT

1

1

1

1

1

Qty

1

Figure 5.17.1. 515-6459-WN Pop bumper assy top bill of materials




8 500-9934-01 POP BUMPER SWITCH ASSY-2 - LUG-LEFT

9 240-5005-00 6-32 NYLON STOP NUT

10 090-5044-ND COIL - 26-1200

11 237-5976-01 #6-32 X 1/4" SHWH SWAGE ZN

12 240-5005-00 #6-32 NYLON STOP NUT

13 535-7347-00 METAL YOKE STOP

14 234-5101-00 * 8 X 1/2 SLT

15 530-5348-00 PLUNGER, POP BUMPER

16 266-5047-00 COMPRESSION SPRING, POP BUMPER

17 545-5031-00 COIL SLEEVE

18 515-5939-00 COIL BRACKET POP BUMPER ASSY

19 545-5609-00 FIBER YOKE

20 535-7346-00 METAL YOKE

21 237-5957-00 #6-32 x 1-3/16" SPIRAL FIN SHANK SCREW

Figure 5.17.3. 515-6549-04-ND Pop bumper bottom bill of materials


9

1

6

1

2

Qty

1

1

1

1

1

1

1

1

3

39

PARTS REFERENCE

5.18 RIGHT RAMP PRO ASSY

500-9952-00

7

5

5

7

4

2 5

5

10

5.20 LEFT RAMP ASSY

500-9954-00

4

6

5

4

3

6 8


1 510-7524-00 RIGHT RAMP RIVETED ASSEMBLY PRO

2 535-1173-00 STAR PRO RAMP BALL GUIDE

3 500-9936-03 GATE ASSEMBLY

4 830-7028-51B BUTYRATE SET - 51B

5 232-5202-00 SCREW, 6-32 X 1/2" PPH MS SEMS

6 240-5005-00 6-32 NYLON STOP NUT

7 242-5001-00 #6 WASHER

8 535-1174-00 RIGHT RAMP, LEFT EDGE PROTECTOR

9 535-1175-00 RIGHT RAMP, RIGHT EDGE PROTECTOR

10 237-5809-00 SCREW, #6 X 1/2" PTH A

5.19 AMPLIFIER ASSEMBLY

511-7674-00

2

9

9

5

5

1

1

Qty

1

1

2

1

1

1

ITEM

NO. PART NUMBER

7

8

5

6

3

4

1

2

2

510-7524-00

535-1173-00

500-9936-03

830-7028-51B

232-5202-00

240-5005-00

242-5001-00

535-1174-00

9 535-1175-00

10 237-5809-00

DESCRIPTION

RIGHT RAMP RIVETED ASSEMBLY PRO

STAR PRO RAMP BALL GUIDE

GATE ASSEMBLY

1

SCREW, 6-32 X 1/2" PPH MS SEMS

6-32 NYLON STOP NUT

#6 WASHER

RIGHT RAMP, LEFT EDGE PROTECTOR

RIGHT RAMP, RIGHT EDGE PROTECTOR

SCREW, #6 X 1/2" PTH A

QTY.

2

1

5

5

1

1

1

1

1

1

3

7

7

8

9

4

5

6

2

3

ID Part Number

1 510-7527-00

500-9936-01

240-5005-00

232-5202-00

242-5001-00

830-7029-50

535-1176-00

535-1177-00

237-5809-00

Description

LEFT RAMP RIVETED ASSEMBLY

GATE ASSEMBLY

6-32 NYLON STOP NUT


#6 WASHER

BUTYRATE SET - 50

LEFT RAMP, LEFT EDGE PROTECTOR

LEFT RAMP, RIGHT EDGE PROTECTOR


5.21 PAUL ASSEMBLY, PRO

511-7676-00

8

1

1

2

4

2

1

1

4

Qty

1

2

3

4

4

3

ITEM

NO. PART NUMBER

3

4

1

2

830-7029-14

880-6175-00

820-8380-33

820-8380-34

5 237-5833-00

DESCRIPTION

BUTYRATE SET - 14

AMPLIFIER MODEL

DECAL SET - 33

DECAL SET - 34

SCREW, #4 X 5/8" PFH -

BLACK

QTY.

1

1

1

1

4

5

1

1

5


1 830-7029-14 BUTYRATE SET - 14

2 880-6175-00 AMPLIFIER MODEL

3 820-8380-33 DECAL SET - 33

4 820-8380-34 DECAL SET - 34

5 237-5833-00 SCREW, #4 X 5/8" PFH - BLACK

40

1

1

4

Qty

1

1

ID

1

2

3

4

5

Part Number Descripton

880-6177-01 PAUL-LEGS

880-6172-01 PAUL-TORSO

265-5078-00 EXTENSION SPRING-NO LOOP

830-7028-35A PAUL GUITAR

237-5840-00 SCREW, #4 X 1/2" PFH AB




1

1

1

Qty

1

1

ITEM

NO. PART NUMBER

1 510-7527-00

2 500-9936-01

3 240-5005-00

4 232-5202-00

5 242-5001-00

6 830-7029-50

7 535-1176-00

8 535-1177-00

9 237-5809-00

DESCRIPTION QTY.

LEFT RAMP RIVETED ASSEMBLY

GATE ASSEMBLY

6-32 NYLON STOP NUT


#6 WASHER

BUTYRATE SET - 50

LEFT RAMP, LEFT EDGE PROTECTOR 1

LEFT RAMP, RIGHT EDGE PROTECTOR 1


2

1

2

4

4

1

1

NO. PART NUMBER

1

2

880-6177-01

880-6172-01

3 265-5078-00

4

5

830-7028-35A

237-5840-00

DESCRIPTION

PAUL-LEGS

PAUL-TORSO

LOOP

PAUL GUITAR

SCREW, #4 X 1/2" PFH AB

QTY.

1

1

1

1

1

5.22 PLASTIC FLASH ASSY - 05

511-7641-05

4

1

PARTS REFERENCE

5.24 PLASTIC ASSY - 08

511-7641-08

2

ITEM

NO. PART NUMBER

1 830-7028-08

2 254-5008-04

3 232-5201-00

DESCRIPTION QTY.

BUTYRATE SET - 08

HEX SPACER - 3/4 "

SCREW, 6-32 X 3/8" PPH MS SEMS 1

1

1

1

ITEM

NO. PART NUMBER

3

4

5

1

2

830-7028-05

550-5032-07

520-6785-00

237-5813-00

240-5303-00

DESCRIPTION

BUTYRATE SET - 05

3

FLASH LAMP PCB


4-40 NYLON LOCK NUT

QTY.

1

2

1

1

2

2

3

5


1 830-7028-05 BUTYRATE SET - 05

2 550-5032-07 HAT - ORANGE SB

3 520-6785-00 FLASH LAMP PCB

4 237-5813-00 SCREW, 4-40 X 1/2" PPH SEMS

5 240-5303-00 4-40 NYLON LOCK NUT


511-7641-06

Qty

1

1

1

2

2


1 830-7028-08 BUTYRATE SET - 08

2 254-5008-04 HEX SPACER - 3/4 "



511-7641-09

4

1

1

Qty

1



1


1 830-7028-06 BUTYRATE SET - 06

2 254-5008-32 HEX SPACER - 2 1/8 "


2

3

ITEM

NO. PART NUMBER

3

4

5

1

2

830-7028-09

254-5008-04

232-5201-00

511-7676-00

237-5833-00

DESCRIPTION

BUTYRATE SET - 09

HEX SPACER - 3/4 "


PAUL ASSEMBLY

SCREW, #4 X 5/8" PFH - BLACK

QTY.

3

1

1

3

4

1

1

Qty

1

1

1

2

3

830-7028-06

254-5008-32

232-5201-00

QTY.

BUTYRATE SET - 06 1

1 830-7028-09 BUTYRATE SET - 09

2 254-5008-04 HEX SPACER - 3/4 "

5.26 PLASTIC ASSEMBLY - 10

511-7641-10

2

1

2

Qty

1

3

3

NO. PART NUMBER

1

2

3

830-7028-10

254-5008-12

232-5200-00

DESCRIPTION

BUTYRATE SET - 10

HEX SPACER - 3/8 "


QTY.

1

1

1

3


1 830-7028-10 BUTYRATE SET - 10

2 254-5008-12 HEX SPACER - 3/8 "

3 232-5200-00 SCREW, 6-32 X 1/4" PPH SEMS


Qty

1

1

1

41

PARTS REFERENCE

5.27 PLASTIC ASSEMBLY - 11

511-7641-11

5.29 PLASTIC FLASH ASSEMBLY -

28

511-7641-28

5

7

4

6

8

1

2

4

ITEM

NO. PART NUMBER

1 830-7028-11

2 254-5008-12

3 232-5200-00

4 550-5059-01

5 237-5510-00

6 240-5005-00

7 545-5348-01

8 550-5052-01

9 234-5000-00

1

DESCRIPTION QTY.

BUTYRATE SET - 11

HEX SPACER - 3/8 "


PLASTIC POST - CLEAR

1

2

2

SCREW, 6-32 X 1-1/2" PPH MS 2

6-32 NYLON STOP NUT

3/16 ID RUBBER RING

MINI POST - CLEAR

SCREW, #6 X 3/8" HWH

1

1

2

2

2

3

7

8

9

3


1 830-7028-11 BUTYRATE SET - 11

2 254-5008-12 HEX SPACER - 3/8 "

3 232-5200-00 SCREW, 6-32 X 1/4" PPH SEMS

4 550-5059-01 PLASTIC POST - CLEAR

5 237-5510-00 SCREW, 6-32 X 1-1/2" PPH MS

6 240-5005-00 6-32 NYLON STOP NUT

7 545-5348-01 3/16 ID RUBBER RING

5.28 BALL GUIDE ASSEMBLY - 03

511-7642-03

2

2

2

2

2

Qty

1

2

1

3

6

5

6

7

4

5

8


1

2

3

830-7028-28 BUTYRATE SET - 28

550-5032-07 HAT - ORANGE SB

520-6785-00 FLASH LAMP PCB

237-5813-00 SCREW, 4-40 X 1/2" PPH SEMS

240-5303-00 4-40 NYLON LOCK NUT

240-5005-00 6-32 NYLON STOP NUT

237-5510-00 SCREW, 6-32 X 1-1/2" PPH MS

254-5000-04 NYLON SPACER - BLACK - 3/8 OD X .175 ID

X 1"

5.30 BALL GUIDE ASSEMBLY - 04

511-7642-04

Qty

1

1

1

1

1

1

1

1

ITEM

3

1 535-1154-03

2 515-0215-00

3 237-5880-02

4 545-9815-00

DESCRIPTION QTY.

STAR BALL GUIDE - 03

LONG RANGE OPTO

EMITTER ASSEMBLY

SCREW, #6 X 1/2 PPH T-25

1

1

2

OPTO SENSOR PROTECTOR 1

1

ITEM

NO. PART NUMBER

1 830-7028-28

2 550-5032-07

3 520-6785-00

4 237-5813-00

5 240-5303-00

6 240-5005-00

7 237-5510-00

8 254-5000-04

DESCRIPTION QTY.

BUTYRATE SET - 28

HAT - ORANGE SB

FLASH LAMP PCB 1


1

1

4-40 NYLON LOCK NUT

6-32 NYLON STOP NUT

SCREW, 6-32 X 1-1/2" PPH MS 1

NYLON SPACER - BLACK - 3/8

OD X .175 ID X 1"

1

1

1

4

2

2


1 535-1154-03 STAR BALL GUIDE - 03

2 515-0215-00 LONG RANGE OPTO EMITTER ASSEMBLY

3 237-5880-02 SCREW, #6 X 1/2 PPH T-25

4 545-9815-00 OPTO SENSOR PROTECTOR

42

2

1

Qty

1

1


1 535-1154-04 STAR BALL GUIDE - 04

2 515-0215-01 LONG RANGE OPTO RECEIVER ASSEMBLY

3 237-5880-02 SCREW, #6 X 1/2 PPH T-25

1

2

Qty

1




ITEM

NO. PART NUMBER

1 535-1154-04

2 515-0215-01

3 237-5880-02

DESCRIPTION

STAR BALL GUIDE - 04

LONG RANGE OPTO

RECEIVER ASSEMBLY

SCREW, #6 X 1/2 PPH T-25

QTY.

1

1

2

ITEM NO. PART NUMBER

1

DESCRIPTION

535-1180-01 MOUNT PLATE, HEAD, STAR PRO

2

3

880-6171-01 MOLDED GENE HEAD, MODIFIED, STAR

237-5840-00 SCREW, #4 X 1/2" PFH AB

QTY.

1

1

5

5.31 GENE HEAD ASSY

500-7144-03

511-7677-00

GENE HEAD ASSEMBLY

KISS PRO

2

PARTS REFERENCE

5.32 SPINNING DISK ASSEMBLY

500-7144-03

8

6

3


1 535-1180-01 MOUNT PLATE, HEAD, STAR PRO

2 880-6171-01 MOLDED GENE HEAD, MODIFIED, STAR

3 237-5840-00 SCREW, #4 X 1/2" PFH AB

7

1

10

9

9

10

4 5

1

1

5

Qty

1

2

3


1 535-0278-02 MOUNTING BRACKET, STAR

2 515-7715-02 MOTOR BRACKET, STAR

3 511-5190-00 SOLDER ASSY SPINNING DISK MOTOR

4 237-6014-00 M5 X 0.8 X 8 PH SELF LOCKING SCREW

5 242-5028-00 WASHER NYLON .265 X .688 X .063

6 515-7714-02 DISK/HUB WELDMENT, STAR

7 237-6092-00 SET SCREW, 10-32 X 5/16, SOCKET CUP PT

8 545-9807-00 ADHESIVE PAD - SPINNING DISK , STAR

9 237-5995-00 #10-32 x 1/2 HWH NO SLOT SERR ZI

10 242-5003-00 #10 FLAT WASHER - 1/2" O.D. X .062 THICK

1

1

1

4

1

2

2

1

1

Qty

1


1

8

9

6

7

10

4

5

2

3

535-0278-02

515-7715-02

511-5190-00

237-6014-00

242-5028-00

515-7714-02

237-6092-00 SET SCREW, 10-32 X 5/16, SOCKET CUP PT

545-9807-00

237-5995-00

DESCRIPTION

MOUNTING BRACKET, STAR

MOTOR BRACKET, STAR

SOLDER ASSY SPINNING DISK MOTOR

M5 X 0.8 X 8 PH SELF LOCKING SCREW

WASHER NYLON .265 X .688 X .063

DISK/HUB WELDMENT, STAR

ADHESIVE PAD - SPINNING DISK , STAR

SCREW, 10-32 X 1/2" HWH N/S SERR ZI

242-5003-00 #10 FLAT WASHER - 1/2" O.D. X .062 THICK

1

1

4

1

QTY.

1

1

1

1

2

2




SPECIFICATIONS

6. SPECIFICATIONS

500-55H1-01

SPECIFICATIONS, MECHANICAL, GAME SETUP

Specification

Weight

Max dimensions, leg levelers extended (h, w, d)

Minimum game dimensions (h, w, d)

Minimum room dimensions per game (h, w, d)

Imperial

210 lbs

78 x 27.75 x 57 in

76 x 27.75 x 57 in

80 x 36 x 84 in

Metric

96 kg

198 x 70.5 x 145 cm

193 x 70.5 x 145 cm

203 x 91 cm x 214 cm

• (h, w, d) = height, width, depth.

SPECIFICATIONS, MECHANICAL, BOXED

Specification

Weight, boxed (without pallet)

Imperial

230 lbs

Box dimensions (h, w, d) 56.5 x 31 x 31 in

Minimum dimensions (h, w, d)

76 x 26 x 57 in

• (h, w, d) = height, width, depth.

SPECIFICATIONS, ELECTRICAL

Metric

105 kg

144 x 79 x 79 cm

193 x 66 x 145 cm

Specification

Line Voltage, Nominal

Line Voltage Range

Line Frequency *

Line Power, Current - attract mode

Line Power, Current - nominal

Line Power, Current - peak, <100 ms

North America -

120VAC

120 VAC

90 VAC - 250 VAC

International - 240VAC

240 VAC

90 VAC - 250 VAC

60 Hz

70 W, 0.6 A @ 120

50 Hz, 60 Hz

70 W, 0.3 A @ 240 VAC

VAC

360 W, 3 A @ 120 VAC 360 W, 1.5 A @ 240 VAC

540 W, 4.5 A @ 120

VAC

540 W, 2.25 A @ 240 VAC

* NOTE: Games designed for 60hz operation (e.g. North America games) will not function correctly on 50hz power and vice versa.

WARNING: Overloading electrical supply circuits is dangerous.

Do not overload circuits. To calculate the maximum number of games for a circuit, check circuit amperage rating and divide by the game Nominal Line Power Current rating for your line voltage. For example, a 15A 120V household circuit, 15/3 A

(nominal current) = 5 games maximum.

SPECIFICATIONS, ENVIRONMENT

Temperature, Operating

Minimum

32 ℉ / 0 ℃

Temperature, Storage 32 ℉ / 0 ℃

Relative Humidity, Operating 5%

Relative Humidity, Storage 5%

Maximum

104℉ / 40 ℃

104℉ / 40 ℃

95% non-condensing

95% non-condensing

• (a) "The appliance has to be placed in a horizontal position."

• (b) "This appliance is not to be cleaned by a Water Jet."

• (i) "Do not locate this appliance in an area where a Water

Jet is used."

• (ii) "Do not clean this appliance with a Water Jet."

• (b) If the supply cord is damaged, it must be replaced in order to avoid a hazard.

6.1 GAME DIMENSIONS




WARRANTY

7. WARRANTY

Stern Pinball machines are assembled in Melrose Park, Illinois, USA; each pinball machine has unique characteristics that make it a one-ofa-kind American-made product. Each machine will have variations in appearance resulting from differences in the machine’s particular wood parts, individual silk screened art and mechanical assemblies. Stern

Pinball has inspected each game element to insure it meets stringent quality and playability standards.

STERN PINBALL INC LIMITED WARRANTY

Stern Pinball Inc (‘SELLER’) warrants only to the initial purchaser of its products that the items listed below are free from defects in material and workmanship under normal use and service for the warranty period specified:

• Printed circuit boards (game logic): 2 months

• Dot Matrix Display boards: 9 months

No other parts of seller’s product are warranted. Warranty periods are effective from the initial date of shipment from seller to its authorized distributors.

Seller’s sole liability shall be, at its option, to repair or replace products which are returned to seller during the warranty periods specified, provided:

1. Seller is notified promptly upon discovery by purchaser that stated products are defective.

2. Such products are properly packaged and then returned freight prepaid, to seller’s plant.

This warranty does not apply to any parts damaged during shipment and/or due to improper handling, or due to improper installation or usage, or alteration. In no event shall the seller be liable for any anticipated profits, loss of profits, loss of use, accidental or consequential damages, or any other losses incurred by the customer in connection with the purchase of a Stern Pinball Inc Product.

WARRANTY DISCLAIMER

Except as specifically provided in a written contract between seller and purchaser, there are no other warranties, express or implied, including any implied warranties of merchantability or fitness for a particular purpose.

7.1 WARNINGS, COMPLIANCE, AND

LEGAL NOTICES

500-55D7-01 Whoa Nellie Big Juicy Melons

For safety and reliability, substitute parts and equipment modifications are not recommended (and may void any warranties).

Use of non-Stern® Pinball Inc. parts or modifications of game circuitry, may adversely affect game play, or may cause injuries. Transport pinball games with hinged backbox in the down position only!

Always take great care when servicing any game. Always read the service manual before replacing or servicing components. SUBSTITUTIONS OF PARTS OR EQUIPMENT

MODIFICATIONS may void FCC Type acceptance.

Always disconnect the line voltage before servicing. Some parts may still hold current when unplugged.

WARNING

This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a class a computing device pursuant to SUBPART J OF PART 15 OF FCC RULES, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference.

RF INTERFERENCE NOTICE: Cable harness placements and ground strap routing on this game have been designed to keep RF radiation and conduction within levels accepted by the FCC rules. To maintain these levels, reposition harnesses and reconnect ground straps to their original placements, if they become disconnected during maintenance.

“The appliance has to be placed in a horizontal position.”

“This appliance is not to be cleaned by a Water Jet.”

603335-7.12.1 (i) “Do not locate this appliance in an area where a Water Jet is used.” (ii) “Do not clean this appliance with a Water Jet.” 60335-7.12.5 (b) If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

IEC 60825-1 2ND EDITION AND WAS ISSUED IN 2007

NOTICES

THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HERE-

WITH IS NOT TO REPRODUCED (EXCEPT WHERE NOTED), USED OR

OTHERWISE DISCLOSED IN WHOLE OR IN PART TO ANYONE WITH-

OUT WRITTEN CONSENT OF STERN® PINBALL, INC. WARNING:

PRODUCTS IN THIS MANUAL, THE COMPANY NAME AND DEVICES

AND THE DESIGN OF THE MANUAL ITSELF, ARE PROTECTED BY

FEDERAL PATENTS (AND PATENTS PENDING), DESIGN REGISTRA-

TIONS, TRADEMARKS AND COPYRIGHTS. ACTION WILL BE TAKEN

IN THE EVENT OF INFRINGEMENT OR IMITATION. THE RIGHT IS

RESERVED TO CHANGE SPECIFICATIONS WITHOUT PRIOR NOTICE.

© 2015 Manufactured by Stern® Pinball. Inc. Icon Designs, ToPS™

Logo, Bump N’ Win™ Logo & all related indicia are trademarks of

Stern® Pinball. Inc. All Rights Reserved. Manufactured in the USA.

“Multiball” is a registered trademark of Williams Electronics Games,

Inc. Used by permission.

PCB Schematics © 1995-2015 by CES (Creative Electronics & Software, Inc,) where noted,




1-800-KICKERS

[email protected]

WWW.STERNPINBALL.COM

FACEBOOK.COM/STERNPINBALL

KISS PRO MODEL #500-55H1-01

MANUAL PART #780-50H1-01

07/07/15 EDITION

*780-50H1-01*

Stern Pinball KISS Pro Owner Manual

Assistant Bot

KISS PRO

TABLE OF CONTENTS

SPIKE PINBALL SOFTWARE UP-

DATE INSTRUCTIONS

1. SETUP AND MOVING

1.1 FIRST-TIME SETUP

INSTRUCTIONS

FIRST-TIME SETUP CONTINUED

FIRST-TIME SETUP CONTINUED

1.2 TRANSPORTING THE GAME

1.3 MAINTENANCE

1.4 MAINTENANCE KITS

1.5 COMMON PARTS

2. SPIKE SYSTEM AND NODE GUIDE

2.1 SPIKE SYSTEM OVERVIEW

2.2 NODE BUS CABLING

2.3 SYSTEM POWER

2.4 SPIKE NODE ADDRESSES

2.5 SPIKE NODE PROGRAMMING

SPIKE SYSTEM AND NODE GUIDE CONTINUED

2.6 SPIKE SYSTEM TERMINOLOGY

2.7 COMMON SPIKE NODE BOARDS

3. LIGHT, SWITCH, AND DRIVER REFERENCE

KISS PRO

NODE 8

NODE 9a

NODE 9

NODE 10a

NODE 11

NODE 10

3.1 SPIKE NODE BOARDS

3.2 DRIVER REFERENCE

DRIVER REFERENCE CONTINUED

3.3 SWITCH REFERENCE

SWITCH REFERENCE CONTINUED

SWITCH REFERENCE CONTINUED

SWITCH REFERENCE CONTINUED

3.4 LIGHT REFERENCE

4. ELECTRONIC PINOUTS AND SCHEMATICS

4.1 SPIKE CPU NODE 0

SPIKE CPU NODE 0 CONTINUED

4.2 NODE 1 CABINET

4.3 LOWER PLAYFIELD 48V 8-DRIVER PINOUT NODE 8

4.4 NODE 9 MID PLAYFIELD 8-DRIVER 48V PINOUT

4.5 NODE 10 UPPER PLAYFIELD 8-DRIVER 48V PINOUT

4.6 NODE 11 UPPER PLAYFIELD 32-LIGHT AND SWITCH PINOUT

NODE 11 UPPER PLAYFIELD 32-LIGHT AND SWITCH PINOUT

4.7 DUAL MOTOR DRIVER

4.9 TROUGH OPTO TRANSMITTER

4.8 MAIN POWER SUPPLY

4.10 TROUGH OPTO RECEIVER

4.11 STAR LOWER PLAYFIELD GRID

LED

4.12 STAR UPPER PLAYFIELD LED

4.13 POWER DISTRIBUTION BOARD

4.14 POWER PLUG WIRING

NORTH AMERICA

INTERNATIONAL

5. PARTS REFERENCE

5.1 PLAYFIELD RUBBER PARTS

5.2 RUBBER SIZE CHART

5.3 PLAYFIELD ASSEMBLIES, TOP

5.4 PLAYFIELD ASSEMBLIES, BOTTOM

5.5 BACKBOX PARTS

5.6 SPEAKER PANEL PARTS

5.7 CABINET PARTS

5.9 BALL TROUGH ASSEMBLY

5.8 AUTO LAUNCH ASSEMBLY

5.10 FLIPPER ASSEMBLY, LEFT

5.11 FLIPPER ASSEMBLY, RIGHT

5.12 SLING SHOT ASSEMBLIES

5.13 SLINGSHOT FLASH ASSY - 02

5.14 SLINGSHOT FLASH ASSY- 04

5.15 POWER SCOOP

5.16 UP-POST VUK ASSEMBLY

5.17 POP BUMPER ASSEMBLY

5.18 RIGHT RAMP PRO ASSY

5.20 LEFT RAMP ASSY