norblast
NORBLAST
ABRASIVE BLASTING EQUIPMENT
®
®
N
T
O
H
R
E
E
W
X
O
C
R
D
O
L
®
O
F
NORBLAST
®
ABRASIVE BLASTING EQUIPMENT
NOREXCO® A LEADING MANUFACTURER
NORBLAST® ABRASIVE BLASTING MACHINES
NORBLAST® SELECTION CHARTS
NORBLAST® KITS AND ACCESSORIES
5
6
7
8
NORBLAST® OPERATING INSTRUCTIONS
NORBLAST® AIR AND ABRASIVE CONSUMPTION CHART
NORBLAST® SPARE PART DRAWINGS
9
9
10
NORBLAST® MANUAL ABRASIVE METERING VALVES
NORBLAST® REMOTE CONTROLS FOR ALL BLASTING MACHINES
11
12-13
NORBLAST® ABRASIVE BLASTING HOSE AND COUPLINGS
NORBLAST® ABRASIVE BLASTING NOZZLE HOLDERS
14
15
NORBLAST® VENTURI ALUMINIUM NOZZLES
NORBLAST® VENTURI SILICON NITRIDE NOZZLES
NORBLAST® PUSH-IN AND ANGLE NOZZLES
16
16
17
NORBLAST® BLASTING HELMETS
NORBLAST® VORTEX AIR CONDITIONING UNIT
NORBLAST® BLASTING SUITS
NORBLAST® AIR FILTER
18
19
19
20
NORFLEX® AIR HOSES AND VENTILATION DUCTING
NORBLAST® RECOVERY HOSE
NORBLAST® AIR OPERATED SHUT OFF VALVES
NORBLAST® ABRASIVE BLASTING ACCESSORIES
21
22
22
23
NORBLAST® PORTABLE DUST FREE BLASTING NOB6
NORBLAST® INTERNAL PIPE CLEANER NOB1 – NOB2
NORBLAST® INTERNAL PIPE CLEANER NOB3
23
24
25
NORBLAST® SOFT SYSTEMS
NORSAB® SOFTGOM BLASTING POWDERS
NORBLAST® MINIMAX
NORBLAST® SOFT 17 L SYSTEM
NORBLAST® SOFT 60 L SYSTEM
26
26
27
28
29
NORCOOL® AIR AFTERCOOLERS
AIRPLUS® COMPRESSORS
30
30
NORBLAST® ALLBLAST PRO+ WETBLASTING SYSTEM
31
NORBLAST® BULK BLASTING AND RECOVERY SYSTEMS
32
Professional
3
Equipment
®
®
NOREXCO
NOREXCO
★
★
★
★
DENMARK - GERMANY - FRANCE - SPAIN
NOREXCO
®
IN EUROPE
®
Professional
4
Equipment
Welcome to the world of NOREXCO® ! With a solid
experience and know-how of the blasting markets and
techniques, NOREXCO® is one of the world-wide leaders
in the manufacturing of Abrasive Blasting Equipment.
NORBLAST® Abrasive Blasting Machines are
manufactured to the highest international standards and
are used on production sites throughout the world for
surface preparation. On shipyards, offshore platforms,
metal industry, wood industry, building sites, ... NORBLAST®
Abrasive Blasting Machines have been developed by
NOREXCO® to withstand the toughest conditions and to
fulfil the most demanding requirements.
All models are equipped with concave head for easy
filling and reserve supply of abrasive, automatic pop-up
valve, heavy gauge pressure vessel tested to the toughest
international standards, conical bottom to ensure an easy
flow of abrasives and inspection trap for access to the
interior of the blasting chamber.
Through the manufacturing process, all components are
clearly identified thanks to a state-of-the-art traceability
system. All weldings are performed with automated robots
and are thoroughly checked and documented. Hydraulic
tests are performed on every tank for pressure control,
in accordance with the latest CE regulations relative to
pressure type equipment, therefore guarantying the highest
possible level of performance and reliability.
Each NORBLAST® Abrasive Blasting Tank is then sandblasted
and powder-coated, offering the best possible finish, the
highest quality and the longest lifetime.
NORBLAST® Abrasive Blasting Equipment : the absolute
choice for QUALITY, RELIABILITY AND SAFETY.
Technical specifications
Temperature range
:
Working pressure
:
Test Pressure
:
Professional
5
-10° / +50° C
0 – 12 bar
17,16 bar
Equipment
®
NORBLAST
ABRASIVE
BLASTING MACHINES
®
NORBLAST® Abrasive Blasting Machines can be mounted in a variety of versions, with various kits and
accessories, in order to meet the exact requirements of the operator. Please refer to the NORBLAST® selection charts on the
following pages in order to compose the NORBLAST® sandblasting system corresponding to your application.
MANUAL ABRASIVE BLASTING MACHINES
NOB17CE
NOB100CE
NOB35CE
NOB60CE
NOB300CE
NOB280CE
NOB200CE
All NORBLAST® Abrasive Blasting Machines are manufactured according to the CE regulations in application and are
delivered with a CE test and conformity certificate.
Please note that the European Regulations impose the use of a remote control on all sandblasting units used within the
European Union. Manual Sandblasting units can therefore only be used outside the E.U., in countries allowing the use of such
equipment.
Further information can be obtained from your local dealer or nearest NOREXCO® Company.
REF.
DESCRIPTION
DIMENSIONS
Ø
HEIGHT
NOB17CE
NOB35CE
NOB60CE
NOB100CE
NOB200CE
NOB280CE
NOB300CE
MANUAL Abrasive Blast Machine 17 ltrs Single chamber
MANUAL Abrasive Blast Machine 35 ltrs Single chamber
MANUAL Abrasive Blast Machine 60 ltrs Single chamber
MANUAL Abrasive Blast Machine 100 ltrs Single chamber
MANUAL Abrasive Blast Machine 200 ltrs Single chamber
MANUAL Abrasive Blast Machine 280 ltrs Single chamber
MANUAL Abrasive Blast Machine 300 ltrs Double chamber/1 outlet
- Two outlets can be supplied on request
260 mm
320 mm
365 mm
510 mm
610 mm
610 mm
610 mm
Professional
6
PIPE
WORK
805 mm 32 kg 1/2”
800 mm 48 kg 1/2"
1140 mm 70 kg 1 1/4”
1130 mm 96 kg 1 1/4”
1445 mm 160 kg 1 1/4”
1740 mm 168 kg 1 1/4”
1800 mm 190 kg 1 1/4”
Above references are for manual NORBLAST® Sandblasting machines.
®
WEIGHT
Equipment
ABRASIVE
BLASTING MACHINES
NORBLAST
®
REMOTE CONTROLLED ABRASIVE BLASTING MACHINES
Each NORBLAST® Abrasive Blasting Machine can be
mounted in several different versions in order to perfectly meet
your needs and requirements. All NORBLAST® machines are
suitable for connection to NORBLAST® pneumatic or electropneumatic remote control systems.
First, please refer to the Sandblasting Unit selection chart
below in order to select the type of metering valve and the type
of remote control which you wish to have mounted on your unit,
choosing between a classic NOB2039 or a split NOB2040, either
in pneumatic or electric version.
Then, select the hose kit and moisture separator kit which you
need.
Finally, select the sandblasting nozzle you would like to use and
the optional accessories : helmet kit, top cover, filter screen, Vortex
air conditioning and separate air filter.
Your NORBLAST® Abrasive Blasting Machine will be mounted
according to your choice and delivered to you ready to operate, in
perfect accordance with your needs.
Please note that all NORBLAST® Abrasive Blasting Machines
delivered within the European Union are delivered in standard
with safety valves, per the E.U. regulations.
NORBLAST® Abrasive Blasting Machines are available
on request as stationary units, as well as skid based
units. Should you at any time have a specific requirement
for a special, non standard blasting unit, please do not
hesitate to contact NOREXCO®. We will be pleased to
develop a unit per your specifications.
METERING VALVES
NOB1003
NOB1005
NOB1007
NOB1530
NOB2039
NOB60CE-1
NOB60CE-2
NOB60CE-3
NOB2040
NOB60CE-4
NOB60CE-5
NOB60CE-6
NOB2039
NOB100CE-1
NOB100CE-2 NOB100CE-3
NOB2040
NOB100CE-4
NOB100CE-5 NOB100CE-6
NOB2039
NOB200CE-1
NOB200CE-2 NOB200CE-3
NOB2040
NOB200CE-4
NOB200CE-5 NOB200CE-6
NOB2039
electric
NOB200CE-7
NOB200CE-8 NOB200CE-9
CAPACITY REMOTE CONTROLS
NOB1004
17l
NOB2039
NOB17CE-2
NOB17CE-1
35l
NOB2039
NOB35CE-2
NOB35CE-1
60l
100l
200l
Professional
7
Equipment
®
NORBLAST
®
KITS AND
ACCESSORIES
MOISTURE SEPARATOR KITS
TOP COVERS AND FILTER SCREENS
17 L
60 L
100 L
200 L
Moisture
separator
Top cover
Filter screen
Type of moisture separator kits
NQ1125
NQ1130
NOB9879
NOB9881
NOB9881
NOB9881
Filter screen
NOB1020
NOB1024
NOB1026
NOB1028
NOB1021
NOB1025
NOB1027
NOB1029
NORFLEX® EXTRA SANDBLASTING HOSE KITS
Sandblasting hose Remote control
diameter
handle
17 L
35 L
13 mm - NS1013
60 L
100 L
200 L
Length
20m
10m
Pneumatic
NOB9919
Without
NOB9918
40m
Pneumatic
NOB9862 NOB9864
Without
NOB9963 NOB9865
25 mm - NS1025
200 L
Complete hose with remote control
handle. Nozzle to be ordered separately.
Top cover
32 mm - NS1032
Pneumatic
NOB9852 NOB9854 NOB9856
Without
NOB9853 NOB9855 NOB9857
Electric
NOB9870 NOB9871 NOB9872
NORBLAST® SANDBLASTING NOZZLES
17 L
35 L
All nozzles with 3/4" thread, serie NY
60 L
All nozzles with 50 mm thread, series AX, OX, SX, NX, UA
100 L
All nozzles with 50 mm thread, series AX, OX, SX, NX, UA
200 L
All nozzles with 50 mm thread, series AX, OX, SX, NX, UA
Choice of NORBLAST®
blasting nozzles
NORBLAST® SANDBLASTING HELMET KITS
Helmet type
Choice of NORBLAST®
blasting helmets
Length
10 m
20 m
40 m
NOB4500
NOB9831
NOB9832
NOB9833
NOB4100
NOB9834
NOB9835
NOB9836
ADDITIONAL ACCESSORIES
Filters
"Vortex" air conditioning
NOB4201, NOB4202
NOB4204
Air filter
®
"Vortex"
air conditioner
Professional
8
Equipment
NOB4180
NORBLAST
OPERATING
INSTRUCTIONS
®
You have chosen NORBLAST®. We would like to congratulate you. Your NORBLAST® equipment
will offer you reliability and performance for years to come. However, it is important that you read
this service manual carefully in order to operate your equipment correctly.
INSTALLATION AND PREPARATION
Compressed air supply is the most critical part of any blasting operation. The results will be obtained in direct proportion to
the volume and pressure passing through the blasting nozzle. To obtain the best results, use pressures of 6-7 bars / 90-105
psi for blasting of steel and 3-4 bars / 45-60 psi for blasting masonry structures. The volume of air is also of the utmost
importance and is directly related to the size of nozzle used. The following Air Flow and Abrasive Consumption Chart can
assist you in ensuring that the compressor to be used is of the correct size.
AIR AND ABRASIVE CONSUMPTION CHART
NOZZLE
NOZZLE PRESSURE BAR / PSI
mm-inch
3.5/50
4.2/60
5.0/70
5.6/80
6.3/90
7.0/100
2.4 - 3/32
0.22/8.2
23
2.5
0.26/9.5
27
2.5
0.3/11
30
2.5
0.34/12
33
3
0.37/13.5
36
3
0.4/14.6
38
3.5
3.2 - 1/8
0.3/11
30
2.5
0.36/13
35
3
0.42/15
40
3.5
0.47/17
46
4
0.51/18.5
51
4.5
0.55/20
56
5
4.8 - 3/16
0.72/26
68
6
0.83/30
78
7
0.92/33
89
8
1.05/38
98
9
1.14/41
108
10
1.25/45
120
10
6.4-1/4
1.3/47
122
10
1.5/54
142
12
1.7/61
161
14
1.9/68
185
15
2.1/74
204
16
2.5/90
239
18
8.0-5/16
2.2/77
213
18
2.5/89
243
20
2.9/101
275
22
3.3/113
305
25
3.6/126
336
28
4.2/150
409
30
9.5-3/8
3.0/108
303
24
3.6/126
348
28
4.0/143
393
32
4.6/161
436
36
5.0/173
478
39
5.6/200
545
44
11.0-7/16
4.1/147
407
33
4.8/170
469
38
5.5/194
535
44
6.1/217
596
49
6.8/240
522
54
7.4/260
750
57
12.7-1/2
5.5/195
527
44
6.3/224
607
50
7.1/252
687
56
7.9/280
764
63
8.8/309
844
69
9.9/350
1000
75
Required air m3 min/cfm
Required abrasive kg/hour
Required h.p.
Required air m3 min/cfm
Required abrasive kg/hour
Required h.p.
Required air m3 min/cfm
Required abrasive kg/hour
Required h.p.
Required air m3 min/cfm
Required abrasive kg/hour
Required h.p.
Required air m3 min/cfm
Required abrasive kg/hour
Required h.p.
Required air m3 min/cfm
Required abrasive kg/hour
Required h.p.
Required air m3 min/cfm
Required abrasive kg/hour
Required h.p.
Required air m3 min/cfm
Required abrasive kg/hour
Required h.p.
Use this Chart as a guide - Individual performance may vary
It is always recommended to place your compressor as close as possible to the blasting machine. This will ensure minimum
pressure loss. Also use large diameter air hose between the compressor and the blasting machine. When placing the
compressor, make sure prevailing winds blow the dust away from the compressor.
OPERATION FOR NORBLAST® UNITS EQUIPPED WITH REMOTE CONTROL
Connect air hose to air inlet.
Connect blasting hose to blast hose inlet.
Connect the air hose of the blasting helmet to the lower valve on the remote control.
Close the upper valve on the remote control (depressurisation valve for the sandblasting unit).
CoĐ
ConĐ.
The blue hose must be connected to the nipple with the biggest inner orifice.
7. Fill the blasting tank with abrasive, using a NORBLAST® strainer to avoid impurities entering the blasting tank.
8. StarĐ.
Air will start flowing out of the orifice of the remote control handle.
If a Đ
continuous air leak during the whole job.
9. Put the nozzle in place on the nozzle holder, using an appropriate gasket.
10. Connect the blasting helmet to the supply hose by using the quick coupling. Put on the helmet and adjust the air flow with the valve
loĐ.
11. Press on the remote control handle. The air leak at the handle will stop and the blasting unit will pressurise.
Adjust tĐ
flow is correctly adjusted. Do not use more abrasives than absolutely necessary, as this will cause excessive dust, higher blasting costs
and a premature wear of the nozzle.
12. To stop blasting, release the remote control handle. The blasting unit will automatically depressurise. It is also possible to depressurise
the blasting unit while the blaster is blasting. To do so, open the upper valve located on the remote control of the blasting unit.
1.
2.
3.
4.
5.
6.
Professional
9
Equipment
®
NORBLAST
®
NORBLAST® CLASSIC
NOB60 - 100 - 200 - 280
SPARE PART
DRAWINGS
NORBLAST® CLASSIC
NOB17
Fig. 1
REP.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
REF
NOB1050
NOB1051
NOB1052
OX1010
NOB1054
NOB1055
NOB1056
NOB1057
NOB1058
NOB1059
NOB1062
NOB1064
NOB1065
NOB1066
NOB1067
NOB1068
NOB1069
NOB1005
NOB1070
NOB1071
NOB1072
NOB1073
NOB1074
NOB1075
NOB1076
NOB1077
NOB1078
NOB1079
NOB1080
NOB1081
NOB1082
NOB1083
NOB1084
NOB1085
NOB1086
NOB1087
NOB1088
NOB1025
NOB1027
NOB1029
NOB1024
NOB1026
NOB1028
®
DESCRIPTION
Elbow 1” MxF
Nipple 1” MxM
Air valve 1” FxF
Quick coupler 1 1/4”
Elbow 1 1/4” MxF
Nipple 1 1/4”x1 1/4” MxM
Air valve 1 1/4” FxF
T-fitting 1 1/4”
Union 1 1/4” MxF
Tube 1 1/4” - 40 mm MxM for NOB 60-100
Tube 1 1/4” - 200 mm MxM for NOB200-280
Elbow 1 1/4” FxF
Tube 1 1/4” - 250 mm MxM for NOB 60
Tube 1 1/4” - 315 mm MxM for NOB100
Tube 1 1/4” - 415 mm MxM for NOB200-280
Elbow 1 1/4” MxF
Nipple 1 1/4” MxM rubber
Abrasive metering valve 1 1/4”
Nipple 1 1/4” MxM rubber
Y-fitting 1 1/4” rubber
Wheel for NOB 60
Wheel for NOB100
Wheel for NOB200-280
Ring
Tube 1 1/4” - 140 mm MxM for NOB 60
Tube 1 1/4” - 215 mm MxM for NOB100
Tube 1 1/4” - 275 mm MxM for NOB200-280
Elbow 1 1/4" x 1" FxF
Nipple 1” - 150 mm for NOB60
Nipple 1” - 230 mm for NOB100
Nipple 1” - 230 mm for NOB200
Nipple 1” - 430 mm for NOB280
Packing
Inspection trap complete
Pop-up valve
O-Ring
Special O-Ring
Filter for NOB 60
Filter for NOB100
Filter for NOB200-280
Cover for NOB 60
Cover for NOB100
Cover for NOB200-280
Professional
10
Fig. 2
REP.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
REF
NOB1031
NOB1032
NOB1033
NOB1034
NOB1035
NOB1036
NOB1037
NOB1038
NOB1040
NOB1041
NOB1003
NOB1043
NOB1044
NOB1045
NOB1046
NOB1047
NOB1053
NOB1021
NOB1023
NOB1020
NOB1022
NOB1048
NOB1049
NOB1089
NOB1090
NOB1091
NOB1092
DESCRIPTION
Elbow 1/2” MxF
Nipple 1/2” MxM
Air valve 1/2” FxF
Quick coupler 1/2”
Elbow 1/2” MxM
T-fitting 1/2”
Union
Tube 1/2” - 200 mm MxM for NOB17
Elbow 1/2” FxF
Tube 1/2” - 100 mm MxM for NOB17
Abrasive metering valve 1/2”
Tube 1/2” MxM
Wheel
Ring
Bolt
O-Ring for NOB25
O-Ring for NOB17
Filter for NOB17
Filter for NOB25
Cover for NOB17
Cover for NOB25
Pop-up valve for NOB25
Pop-up valve for NOB17
Tube 1/2” - 210 mm for NOB17
Tube 1/2” - 210 mm for NOB25
Tube 1/2” - 90 mm for NOB17
Tube 1/2” - 100 mm for NOB25
®
Equipment
MANUAL ABRASIVE
METERING VALVES
NORBLAST
®
NORBLAST® Manual Abrasive Metering Valves can be installed on any existing blasting systems,
regardless of the brand. Mounting kits have been designed to facilitate the installation.
NOB1005
Metering valve 1”1/4.
General purpose for
NOB60-100 200-280-300
NOB1007
NOB1530
Air operated metering
Metering valve
valve 1"1/4
1”1/4
For reusable abrasive on all units except NOB17-35
NOB1003
Metering valve 1/2”
General purpose
for NOB17-25-35
NORBLAST® COMPLETE MOUNTING KITS
Not
delivered
in kit
Not
delivered
in kit
Not
delivered
in kit
Also
available
in 120°
KIT NOB1105
REP. QTY REF.
1 1 OX1010
2 2 NOB1069
3 1 NOB1071
4 1 NOB1070
5 1 NOB1005
6 2 NOB1494
7
DESCRIPTION
Quick coupler
Nipple 1”1/4 MxM rubber
Y-piece 1”1/4 rubber
Nipple 1”1/4 MxM rubber
Metering valve
Hose coupling 1”1/4M
with clamp
1 NOB1094 Hose 1”1/4 - 1M
KIT NOB1106
REP.
1
2
3
4
5
6
7
8
QTY
1
3
1
2
1
1
2
8
REF.
OX1010
NOB1069
NOB1093
NOB1494
NOB1094
NOB1007
NOB1138
NOB1157
DESCRIPTION
Quick coupler
Nipple 1”1/4 MxM rubber
T-union 1”1/4 rubber
Hose coupling 1”1/4M w/clamp
Hose 1”1/4 - 1M
Metering valve
Flange 1”1/4
Bolts
KIT NOB1108
REP.
1
2
3
4
5
6
7
8
QTY
1
2
1
1
1
2
2
1
REF.
NOB1034
NOB1032
NOB1036
NOB1043
NOB1003
NW9146
NOB1096
NOB1097
DESCRIPTION
Quick coupler 1/2”
Nipple 1/2” MxM
T-union 1/2”
Pipe 1/2” MxM
Metering valve 1/2”
Hose coupling 1/2” M
Clamp
Hose 1/2” - 1M
SPARE PARTS FOR NORBLAST® ABRASIVE METERING VALVES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
REF.
NOB1139
NOB1140
NOB1141
NOB1142
NOB1143
NOB1144
NOB1145
NOB1146
NOB1147
NOB1148
NOB1149
NOB1150
NOB1151
NOB1152
NOB1153
NOB1154
NOB1155
DESCRIPTION
Upper body
Valve separation
Gasket
Disc
Lower body
Handle
Pin
Bolt
Spring
Gland
Packing
Gasket
Inspection plate
Nut/Bolt
O-Ring
Pin
Gauge
REP.
1
2
3
4
5
6
7
8
9
10
NOB1530
spares
REP.
Professional
REF.
NOB1129
NOB1110
NOB1130
NOB1131
NOB1132
NOB1133
NOB1134
NOB1135
NOB1137
NOB1138
NOB1157
NOB1103
NOB1138
NOB1228
NAB2695
NOB1110
NOB1129
DESCRIPTION
Rubber liner yellow
Rubber liner red
Housing
Housing
Reducer
Regulating screw
O-Ring
Knob
Nut
Flange 1”1/4
Bolt/nut
Mounting kit for NOB1530
Flange 1 ¼”
Elbow ¼” MxF
Plug ¼” M
Rubber liner red
Rubber liner yellow
11
REP.
1
2
3
4
5
6
7
8
9
REF.
NOB1120
NOB1121
NOB1122
NOB1123
NOB1124
NOB1125
NOB1126
NOB1127
NOB1128
DESCRIPTION
Top casting
Body
Gasket
Plate with stem
Handle
Pin
O-Ring
Spring
Washer
Equipment
®
NORBLAST
®
REMOTE CONTROLS FOR
ALL BLASTING MACHINES
Safety regulations imposed in many countries throughout the world consider manual sand abrasive blasting as
hazardous and impose blasting systems to be equipped with remote controls, giving the operator maximum safety.
NORBLAST® Remote Control Systems are all equipped with so called “deadman handles”.
To start the blasting machine, the operator must press down the “deadman handle”, thereby allowing the air inlet valve to open
and the air outlet to close. This will enable to start blasting. Should the operator, at any time, want to stop blasting, he releases his
hold on the handle, which immediately will close the air inlet valve and open the exhaust valve, thus depressurising the blasting
machine. Should any incident occur to the operator and he releases his grip on the “deadman handle”, the blasting machine will
stop immediately, thus avoiding injuries.
Two types of remote control systems are available :
Pneumatically operated remote control system. To be used when the length of the blasting hose does not exceed 40
meters, as otherwise the delay from releasing the “deadman handle” until the closing of the air valve will be too long.
Electrically operated remote control system. To be used when the length of the blasting hose exceeds 40 meters, or if the
operator prefers the accuracy and speed of these systems. In certain fields, such as refineries or any area where explosive hazards
exist, these systems cannot be used.
IMPORTANT : NORBLAST® Remote Control Systems can be installed on any existing blasting units, regardless
of the brand.
NORBLAST® TRADITIONAL REMOTE CONTROL
2
1
REF.
DESCRIPTION
Remote control
NOB2039
with silencer
NOB2030 Remote control
NOB2035 Silencer
1
2
REP.
6
11
13
15
REPAIR KIT NOB2070
REF.
QTY DESCRIPTION
NOB2049
2
Gasket
NOB2052
1
Diaphragm
NOB1054
2
Piston seal
NOB2056
3
O-Ring
NORBLAST® SPLIT REMOTE CONTROL
2
REP.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
22
23
24
REF.
DESCRIPTION
NOB2045 Nipple 3/4” MxM
NOB2046 Manifold
NOB2047 Top cover
NOB2048 Cylinder
NOB1222 Screw 8x25
NOB2049 Gasket
NM8010
Nipple 1/4” MxM
NOB2050 Valve housing
NOB2051 Bottom cover
NOB1231 Ball valve 1/4”
NOB2052 Diaphragm
NOB2053 Cylinder housing
NOB2054 Piston seal
NOB2055 Piston screw 8x15
NOB2056 O-Ring
NOB2057 Inlet valve
NOB2058 Piston
NOB2065 Union elbow 3/4” FxM
NOB2059 Nipple 3/4” MxM
NR6006
Coupling
TA1003
Air hose*
NOB2035 Silencer with couplings
* Lenght to be specified
1
3
NOB2000 Pneumatic remote control handle
REF.
NOB2040
1 NOB2041
2 NOB2043
3 NOB2035
®
DESCRIPTION
Remote control w/silencer
Inlet valve
Exhaust valve
Silencer
REPAIR KIT NOB2071
REP. REF.
QTY DESCRIPTION
6 NOB2049 2
Gasket
11 NOB2052 1
Diaphragm
Professional
12
NOB2020 Electric remote control handle
Equipment
REMOTE CONTROLS FOR
ALL BLASTING MACHINES
NORBLAST
PNEUMATIC REMOTE CONTROL
®
ELECTRIC 12/24V REMOTE CONTROL
6
2
1
3
3
1
4
6
8
7
5
5
4
2
REP.
1
2
3
4
5
REF.
NOB2030
NOB2035
NOB2000
NR6006
TA1024
DESCRIPTION
Remote control
Silencer with couplings
Remote control handle pneumatic
Couplings 1/4” F
Twin air hose 1/4” - specify length
REP.
1
2
3
4
5
6
7
8
REF.
NOB2030
NOB2035
NOB1275
NOB1276
NOB2020
NOB1262
NOB1263
NOB1264
NOB1265
NOB2000
REP.
1
2
3
4
5
6
7
8
9
10
11
12
13
REF.
DESCRIPTION
NOB2000 Remote control handle pneumatic
NOB2001 Body
NOB2002 Lever
NOB2003 Manifold
NOB2004 Safety lock
NOB2005 Gasket
NOB2006 Rubber insert rounded side downwards
NM8039
Nipple 1/8x1/4 MxM
NOB2007 Spring
NOB2008 Screw 5x40
NOB2009 Screw 4x25
NOB2010 Screw 4x10
NOB2011 Lock nut
NM8040
Nipple 1/8x1/4 MxM 1.5 mm
Professional
DESCRIPTION
Remote control
Silencer with couplings
Control box complete 12 V
Control box complete 24 V
Remote control handle electric
Plug M
Plug F
Electric cable - specify length
Twin air hose - 1 m - Coupled 1/4” F
NOB2020
REP.
1
2
3
4
5
6
7
8
9
10
11
12
13
13
REF.
NOB2020
NOB2001
NOB2002
NOB2007
NOB2004
NOB2008
NOB2011
NOB2012
NOB2006
NOB2014
NOB2015
NOB2016
NOB2010
NOB2017
DESCRIPTION
Remote control handle electric
Body
Lever
Spring
Safety lock
Screw 5x40
Lock nut
Micro switch with cable
Rubber insert rounded side upwards
Hinge
Pin 3-2
Clamp
Screw 4x10
Spring
Equipment
®
NORBLAST
BLASTING HOSE
AND COUPLINGS
®
NORBLAST® ABRASIVE BLASTING HOSE
REFERENCE
Ø INT.
MM / INCH
13 / 1/2”
19 / 3/4”
25 / 1”
32 / 1 1/4”
38 / 1 1/2”
NS1013
NS1019
NS1025
NS1032
NS1038
Ø EXT.
MM
27
32
39
48
56
WORKING PRESSURE
BAR / PSI
17 / 255
16 / 240
14 / 210
13 / 195
10 / 150
MIN. BURST PRESSURE
BAR / PSI
70 / 1050
65 / 975
55 / 825
50 / 750
42 / 630
WEIGHT
G/M
400
650
800
1170
1300
It is recommended to use NORFLEX® Extra 1 ¼” – 32mm blasting hose on the following equipment :
NOB100 – 200 – 280 – 300. On the NOB 60, use 1 ¼” – 32 mm or 1” – 25 mm hose.
On NORBLAST® NOB 17 units, use NORFLEX® Extra hose with an inside diameter of ¾” – 19 mm. However ½” – 13 mm
hose can also be used for smaller jobs where the hose does not exceed 10 to 15 meters.
Please refer to the blasting hose selection chart on page 8 to order the complete hose kit suited for your blasting machine.
Always place your blasting hose in a straight line. Sharp curves will create rapid and premature wear.
NORBLAST® ABRASIVE BLASTING HOSE COUPLINGS
OX1011
OX1014
REF.
HOSE Ø INT.
OX1005
OX1010
OX1011
OX1006
OX1014
OX1015
OX1016
OX1017
OX1020
OX1021
13 mm - 1/2”
19 mm - 3/4”
25 mm - 1”
32 mm - 1 1/4”
38 mm - 1 1/2”
-
OX1005
HOSE Ø
EXT.
27 mm
32 mm
39 mm
48 mm
56 mm
-
OX1006
OX1010
OX1015
OX1016
OX1017
MATERIAL
DESCRIPTION
Cast iron
Cast iron
Polyamide
Aluminium
Polyamide
Cast iron
Cast iron
Cast iron
Rubber
Rubber
Quick coupler 1” F
Quick coupler 1 1/4” F
Quick coupler 1 1/4” (for OX1014)
Coupling for OX1005 - 1”M
Quick coupler (for OX1011)
Quick coupler
Quick coupler
Quick coupler
Gasket for OX1005
Gasket for OX1010 - 1015 - 1016 - 1017
Only externally fitted quick couplings should be used on blasting hose.
These couplings are all externally fitted and held in place with screws penetrating the wall of the hose. Make sure that the
screws do not penetrate the hose completely or this could create air leaks.
All couplings have replaceable gaskets, ensuring complete air seal. Check every day for wear. Replace if needed.
®
Professional
14
Equipment
ABRASIVE BLASTING
NOZZLE HOLDERS
NORBLAST
®
NORBLAST® ABRASIVE BLASTING NOZZLE HOLDERS
OX1030
OX1
OX1034
OX2
OX1031
OX1042
OX3
OX4
REF.
Ø INT. HOSE
OX1030
OX1034
OX1031
OX1042
OX1032
OX1043
OX1
OX2
OX3
OX4
OX5
OX6
OX1019
OX1022
OX1023
NOB1098
13 mm - 1/2”
19 mm - 3/4”
25 mm - 1”
25 mm - 1”
32 mm - 1 1/4”
32 mm - 1 1/4”
13 mm - 1/2”
13 mm - 1/2”
19 mm - 3/4”
25 mm - 1”
32 mm - 1 1/4”
38 mm - 1 1/2”
Gasket for nozzle holders OX1 - OX1030
Gasket for nozzle holders OX1031 - OX1042
Gasket for nozzle holders OX1032 - OX1043 - OX3 - OX4 - OX5 - OX6
Screw for nozzle holder and hose coupling
OX1032
OX1043
OX5
OX6
Ø EXT. HOSE
THREAD SIZE
MATERIAL
27 mm
32 mm
39 mm
39 mm
48 mm
48 mm
27 mm
25 mm
32 mm
39 mm
48 mm
56 mm
3/4”
3/4”
1 1/4”
50 mm coarse
1 1/4”
50 mm coarse
3/4”
28 mm coarse
50 mm coarse
50 mm coarse
50 mm coarse
50 mm coarse
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Aluminium
Polyamide
Polyamide
Polyamide
Polyamide
Polyamide
Polyamide
Always make sure that the hose is square cut to fit properly into the nozzle holder, and the same manner for the hose
couplings.
These nozzle holders are all externally fitted and held in place with screws penetrating the wall of the hose. Make sure that the
screws do not penetrate the hose completely or this could create air leaks.
All nozzle holders have replaceable gaskets, ensuring complete air seal. Check every day for wear. Replace if needed.
Professional
15
Equipment
®
NORBLAST
®
ABRASIVE
BLASTING NOZZLES
AX SERIE Long Venturi Tungsten Carbide Aluminium Nozzles
AX65
AX80
AX95
AX110
AX125
AX190
REF.
Ø INCH / MM
LENGTH
MM
AX 65
AX 80
AX 95
AX110
AX125
AX190
1/4” / 6.3 mm
5/16” / 8.0 mm
3/8” / 9.5 mm
7/16” / 11.0 mm
1/2” / 13.0 mm
3/4” / 19.0 mm
135
145
170
200
230
230
INLET DIAMETER
INCH / MM
THREAD
1/4” / 32 mm
1/4” / 32 mm
1/4” / 32 mm
1/4” / 32 mm
1/4” / 32 mm
1/4” / 32 mm
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
1
1
1
1
1
1
Can be supplied with 1” inlet Ø, flanges and 1 ¼” NPT thread upon request.
OX SERIE Long Venturi Tungsten Carbide Aluminium / Rubber Protected Nozzles
OX65
OX80
OX95 OX110 OX125 OX160 OX190
REF.
Ø INCH / MM
LENGTH
MM
OX65
OX80
OX95
OX110
OX125
OX160
OX190
1/4” / 6.3 mm
5/16” / 8.0 mm
3/8” / 9.5 mm
7/16” / 11.0 mm
1/2” / 13.0 mm
5/8” / 16.0 mm
3/4” / 19.0 mm
135
145
170
200
230
230
230
1
1
1
1
1
1
1
INLET DIAMETER
INCH / MM
THREAD
1/4” / 32 mm
1/4” / 32 mm
1/4” / 32 mm
1/4” / 32 mm
1/4” / 32 mm
1/4” / 32 mm
1/4” / 32 mm
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
Can be supplied with 1” inlet Ø, flanges and 1 ¼” NPT thread upon request.
SX SERIE Long Silicon Nitride Nozzles Special Thermoplastic Jacket
SX40
SX65
SX80
SX95
SX110
SX125
REF.
Ø INCH / MM
SX40
SX60
SX80
SX95
SX110
SX125
3/16” / 4.8 mm
1/4” / 6.3 mm
5/16” / 8.0 mm
3/8” / 9.5 mm
7/16” / 11.0 mm
1/2” / 12.5 mm
LENGTH
MM
INLET DIAMETER
INCH / MM
THREAD
117
143
152
174
203
230
1”
/ 25 mm
1”
/ 25 mm
1 1/4” / 32 mm
1 1/4” / 32 mm
1 1/4” / 32 mm
1 1/4” / 32 mm
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
NX SERIE Short Venturi Tungsten Carbide Aluminium Nozzles
NX40
NX60
NX80
NX95
NX110
NX125
REF.
Ø INCH / MM
NX40
NX60
NX80
NX95
NX110
NX125
3/16” / 4.8 mm
1/4” / 6.3 mm
5/16” / 8.0 mm
3/8” / 9.5 mm
7/16” / 11.0 mm
1/2” / 13.0 mm
LENGTH
MM
INLET DIAMETER
INCH / MM
THREAD
84
84
84
84
84
84
1”
/ 25 mm
1 1/4” / 32 mm
1 1/4” / 32 mm
1 1/4” / 32 mm
1 1/4” / 32 mm
1 1/4” / 32 mm
50 mm
50 mm
50 mm
50 mm
50 mm
50 mm
Can be supplied with 1” inlet Ø, flanges and 1 ¼” NPT thread upon request.
NY SERIE Short Venturi Tungsten Carbide Aluminium Nozzles
NY30
NY40
NY60
NY80
NY95
NY125
REF.
Ø INCH / MM
NY30
NY40
NY60
NY80
NY95
NY125
1/8” / 3.2 mm
3/16” / 4.8 mm
1/4” / 6.3 mm
5/16” / 8.0 mm
3/8” / 9.5 mm
1/2” / 13.0 mm
LENGTH
MM
INLET DIAMETER
INCH / MM
THREAD
45
45
45
45
45
45
1/2” / 13 mm
1/2” / 13 mm
1/2” / 13 mm
1/2” / 13 mm
1/2” / 13 mm
1/2” / 13 mm
3/4” NPT
3/4” NPT
3/4” NPT
3/4” NPT
3/4” NPT
3/4” NPT
Can be supplied upon request with coarse thread.
®
Professional
16
Equipment
ABRASIVE
BLASTING NOZZLES
NORBLAST
®
UX SERIE Push-in Venturi Tungsten Carbide Aluminium Nozzles
REF.
Ø INCH / MM
LENGTH
MM
INLET DIAMETER
MM
HOSE Ø
UX8025 5/16” / 8.0 mm
115
20 mm
25 mm
UX9525 3/8” / 9.5 mm
115
20 mm
25 mm
UX8032 5/16” / 8.0 mm
115
24 mm
32 mm
UX9532 3/8” / 9.5 mm
115
24 mm
32 mm
LENGTH
MM
INLET DIAMETER
MM
THREAD
UA SERIE Tungsten Carbide Angle Nozzles
REF.
Ø INCH / MM
UA401
1x3/16” / 4.8 mm
80
20 mm
50 mm
UA403
3x3/16” / 4.8 mm
80
20 mm
50 mm
UA601
1x1/4” / 6.0 mm
80
20 mm
50 mm
UA603
3x1/4” / 6.0 mm
80
20 mm
50 mm
UA801
1x5/16” / 8.0 mm
80
20 mm
50 mm
UA803
3x5/16” / 8.0 mm
80
20 mm
50 mm
UA951
1x3/8” / 9.5 mm
80
20 mm
50 mm
UA953
3x3/8” / 9.5 mm
80
20 mm
50 mm
Can be supplied with 1 ¼” NPT thread upon request.
Other sizes can also be supplied.
It is the utmost importance to select the right nozzle for the right job. Make sure to consult the Air and Abrasive Consumption
Chart on page 9, in order to ensure that sufficient air supply is available.
Use only Venturi nozzles, which are easily recognisable by their large inlet diameter tapered gradually into the orifice diameter
and then flaring out at the outlet end.
The velocity of the abrasives at the outlet is normally in excess of 700 km / hour and has the highest concentration of impact
of any type of nozzles. All NORBLAST® nozzles are of Venturi type.
Two factors are important when selecting a nozzle :
1. Orifice size : considering that sufficient air volume and pressure are available, one should always select the largest size
nozzle possible. The following example will illustrate the importance of air pressure measured at the nozzle :
Nozzle blasting at 100 psi (7 bar) = 100 % of area
Nozzle blasting at 80 psi (5.6 bar) = 66 % of area
Nozzle blasting at 60 psi (4.2 bar) = 50 % of area
2. Length of nozzles : always use the longest size nozzle available to ensure the highest impact.
Short type nozzles (less than 90 mm) should only be used for smaller, easy to blast surfaces or in very confined areas in
order to give more operator ease.
IMPORTANT : always consult the “Air and Abrasive Consumption Chart” on page 9.
®=
NORBLAST
NORBLAST®
= QUALITY
QUALITY AND
AND SERVICE
SERVICE
Professional
17
Equipment
®
NORBLAST
®
ABRASIVE
BLASTING HELMETS
NOB4500
REP.
1
2
3
4
5
6
8
9
10
11
12
13
14
15
16
17
18
REF.
NOB4500
NOB4010
NOB4011
NOB4012
NOB4013
NOB4514
NOB4515
NOB4017
NOB4018
NOB4019
NOB4020
NOB4521
NOB4522
NOB4023
NOB4024
NOB4025
NOB4538
NOB4541
®
NOB4100
REP.
DESCRIPTION
Helmet complete as illustrated
Wire mesh screen
Glass window
Polyester window
Window gasket
Window frame
Rubber helmet cover
Head band
Neck bib
Cape - black
Waist belt
Adapter
Hose with fittings
Silencer
Regulator
Quick coupler
Airflow indicator
Window clip (hook + hinge)
Professional
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
REF.
NOB4100
NOB4026
NOB4027
NOB4028
NOB4029
NOB4030
NOB4031
NOB4017
NOB4018
NOB4019
NOB4020
NOB4021
NOB4022
NOB4023
NOB4024
NOB4025
NOB4038
DESCRIPTION
Helmet complete as illustrated
Acetate window
Wire mesh screen
Window frame
Polyester window
Window gasket
Rubber Helmet cover
Head-band
Neck bib
Cape - black
Waist-belt
Adapter
Hose with fittings
Silencer
Regulator
Quick coupler
Airflow indicator
Equipment
"VORTEX" UNIT AND
BLASTING SUITS
NORBLAST
®
"VORTEX" AIR CONDITIONING UNIT
The NORBLAST® VORTEX system converts a supply of
compressed air into hot or cold streams. The proportion of hot or
cold air temperature can be adjusted by a control valve and by the
inlet air pressure.
The NORBLAST® VORTEX system is particularly suitable as
personal air conditioning for blasting helmets and air hoods.
REF.
DESCRIPTION
NOB4180
NORBLAST® VORTEX air conditioning system
complete including silencer, control valve and
coupling.
OPERATING INSTRUCTIONS
When the air is cold
Connect the Vortex tube on the airhood (1).
Remove the silencer, control valve and coupling from the breathing air hose
(2) and connect this hose with a hose clip (3) on the socket (9) at the hot outlet
of the Vortex tube.
Maximum volume but minimal heating is obtained when the control valve
(8) is closed.
Minimum volume but maximum heating is obtained when the control valve
(8) is opened.
When the air is hot
Connect the Vortex tube on the airhood (1).
Interchange white cap (10) from the cold to the hot outlet.
ATTENTION : do not interchange the silencer (5) of the cold and hot outlet.
Turn the elbow (7) of the air inlet 180°.
Remove silencer, control valve and coupling (4) from the breathing hose (2)
and connect this hose with a hose clip (3) to the hexagonal part of the Vortex
tube control valve (8).
Cool air temperature : maximum volume but minimum cooling is developed
when the control valve is closed. When the control valve is opened, cooler air
is produced but at a reduced volume.
General
Increasing the inlet pressure increases the performance of the Vortex tube.
After making any control valve adjustments, allow at least one minute for the
temperature change to occur, then re-adjust again if required.
Humid air may cause problems by freezing the silencer on the cold outlet.
An air filter type NOB4200 should be installed at the air supply compressor,
in order to remove objectionable odours, oil vapours, condensed moisture or
any other matter. (Refer to page 20.)
NORBLAST® BLASTING SUITS
NOREXCO® offers a complete range of blasting suits from light
weight reinforced cotton to more resistant and protective leather
suits. Please select your size and fabric from the chart below.
TYPE OF FABRIC
SIZE Leather / Cotton
Nylon / Cotton
Reinforced Cotton
M
NOB7010
NOB7030
NOB7040
L
NOB7011
NOB7031
NOB7041
XL
NOB7012
NOB7032
NOB7042
XXL
NOB7013
NOB7033
NOB7043
NOB7010
Professional
19
NOB7030
Equipment
NOB7040
®
NORBLAST
®
AIR FILTERS
NORBLAST® Airline Filters are designed to remove particle matter as well as oil,
oil mist, odours and excess moisture from compressed air. By the utilisation of a multi-stage filtration
process, the filters effectively trap and remove air impurities with little pressure drop. The special guard
designed by NOREXCO® provides an efficient protection of the filter on all the different job sites.
Warning : the air filter does not remove carbon monoxide (CO) or other toxic
vapours.
The multi-stage filtering process :
Compressor-supplied air enters through the 1” inlet port and starts the filtration process upward
through multiple layers of filtering material. Once filtered, it exits into the adjoining air supply hose.
Stage 1 Vortex action of the incoming air in the outer cylinder removes particles, water and oil.
Stage 2 Oil, vapour and water are absorbed by activated alumina.
Stage 3 Odours are removed by activated charcoal.
Stage 4 Particles are removed by 100% polyester fibre.
Stage 5 Respiratory felt at final stage removes the last particles.
Filter cartridge replacement :
The filter cartridge should be inspected weekly or more often depending on usage and number of
outlets, and replaced if the following signs are noticed :
- Contamination or visible discoloration of the filter cartridge (visible only when the filter is disassembled).
- The presence of moisture at the outlet fitting(s).
- After a period of three months of continued use (based on 40 hours per week).
- NOTE : filters with multiple outlets require more frequent changes.
- The outlet pressure falls below 80 psi – 5.5 bar.
REP. REF.
DESCRIPTION
This model is an in-line air filter with no pressure regulator
or gauge.It delivers 100 CFM (2.83m3/min.) of air at the
NOB4200
maximum recommended pressure of 100 PSI.
An externally mounted regulator can be used with the filter.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
NOB4201
NOB4202
NOB4204
NOB4210
NOB1231
NOB4216
NOB4217
NQ1145
NQ1025
NM8012
NM8409
NM8407
NAB2695
NG5113
NOB4219
NM8043
NOB1232
TA1004
NR6009
SPECIFICATIONS NOB4200
Air flow
NOB4200
Filter complete with 1 outlet - air regulator - gauge
Filter complete with 2 outlets - air regulator - gauge
Filter complete with 4 outlets - air regulator - gauge
Air filter cartridge
Air petcock 1/4” NPT
Manifold cover
Gasket
Air regulator all models 3/8”
Gauge
Nipple 3/8” - 3/8” NPT MxM
T 3/8” MxMxM
Cross 3/8” NPSM MxFxFxF
Plug 1/4” M
Bushing 1” NPT M x 3/8” NPSM F
O-Ring
Nipple 3/8” - 3/8” BSP M
Valve 3/8” FxF
Air hose 3/8” for helmets - specify length
Coupling 3/8” NPSM - for TA1004
100 CFM (2.83
NOB4201 (1 outlet)
m3/min)
0.15 CFM (0-0.42
m3/min)
NOB4201 - 1 outlet
NOB4202 - 2 outlets
NOB4204 - 4 outlets
NOB4202 (2 outlets)
0.30 CFM (0-0.85
m3/min)
NOB4204 (4 outlets)
0.60 CFM (0-1.70 m3/min)
Maximum pressure 100 PSI / 7 bar
100 PSI / 7 bar
100 PSI / 7 bar
100 PSI / 7 bar
Outlet connection
1” NPSM F
3/8” BSP M
3.8” BSP M
3/8” BSP M
Inlet connection
Claw coupling
Claw coupling
Claw coupling
Claw coupling
Tank diameter
140 mm
140 mm
140 mm
140 mm
Height with guard
760 mm
760 mm
760 mm
760 mm
Weight
11,3 kg
12 kg
12,1 kg
12,3 kg
®
Professional
20
Equipment
NORFLEX®
AIR HOSES
NORBLAST
®
NORFLEX® air hoses for the blasting industry are of high quality and meet all safety
standards. NORFLEX® air hoses ensure a long-life under difficult working conditions.
NORFLEX® AIR HOSE FOR HELMETS AND AIR CONTROLS
PVC hose, reinforced and
very flexible. Ideal for
blasting helmets and air
controls.
REF.
Ø MM/INCH
Ø EXT. MM WORKING PRESSURE
PACKING
TA1003
6 / 1/4”
12
18 bar / 270 psi
50 m
TA1004
10 / 3/8”
16
15 bar / 225 psi
50 m
NORFLEX® TWIN AIR HOSE FOR REMOTE CONTROLS
TA1024 - Rubber hose
colour blue / red
TA1025 – Polyurethane
hose colour blue / blue
REF.
Ø MM/INCH
Ø EXT. MM WORKING PRESSURE
PACKING
TA1024
6 / 1/4”
2x11.0
18 bar / 270 psi
40 m
TA1025
6 / 1/4”
2x9.5
20 bar / 300 psi
40 m
NORFLEX® HEAVY DUTY AIR HOSE
REF.
All purpose heavy duty
air hose for paint spray
and blasting equipment.
TA1007
TA1008
TA1009
TA1010
TA1011
TA1012
TA1013
TA1014
TA1015
Ø MM/INCH
10 / 3/8"
13 / 1/2”
19 / 3/4”
25 / 1”
32 / 1 1/4”
38 / 1 1/2”
51 / 2”
76 / 3”
102 / 4”
Ø EXT. MM
WORKING PRESSURE
PACKING
17
21
29
36
46
52
67
96
15 bar / 225 psi
15 bar / 225 psi
15 bar / 225 pai
15 bar / 225 psi
20 bar / 300 psi
20 bar / 300 psi
20 bar / 300 psi
20 bar / 300 psi
40 m
40 m
40 m
40 m
40 m
20 m
20 m
20 m
122
20 bar / 300 psi
20 m
NORFLEX® VENTILATION DUCTING
NORFLEX® ventilation ducting is a multi-function ducting in double faced
heavy duty PVC. Plastic coated wire spirals welded inside all ducting ensure a
maximum flexibility and a long-life. Transport is easy as ducting can be piled
flat. Easily assembled with quick release joints. Suitable for all forced auxiliary
ventilation, dehumidification and suction.
REF.
TA1030
TA1031
TA1032
TA1033
TA1034
TA1035
TA1040
TA1041
- Delivered in 5m, 7.5m and 10m length. TA1042
- Pitch of 150 mm (also available as an
TA1043
option with 75 mm pitch)
TA1044
- Larger diameters upon request
TA1045
- Specifications at 20° C.
TA1058
Professional
Ø EXT.
MM
BEND RAD.
MM
150
105
200
140
250
175
300
210
400
280
500
350
Quick release joint for Ø 150
Quick release joint for Ø 200
Quick release joint for Ø 250
Quick release joint for Ø 300
Quick release joint for Ø 400
Quick release joint for Ø 500
Repair kit
21
PRESSURE
BAR
SUCTION
BAR
WEIGHT
KG/M
0.64
0.55
0.45
0.35
0.25
0.20
0.05
0.05
0.03
0.03
0.03
0.03
1.100
1.200
1.350
1.440
2.050
3.300
Equipment
®
NORBLAST
RECOVERY HOSE / AIR
OPERATED SHUT OFF VALVES
®
NORFLEX® ABRASIVE RECOVERY HOSE
NORFLEX® Abrasive Recovery Hose is a flexible, light-weight hose, specially designed for clean-up systems and for fast
abrasive removal and storage after blast cleaning operations. It is also suitable for handling other abrasive dry materials such
as gravel, sand, cement and plastic pellets...
Manufactured with an inside tube in natural rubber, highly resistant to abrasion, and reinforced with high strength synthetic
helix wires. Two copper wires ensure the discharge of static electricity. Outside cover in black corrugated rubber.
REF.
NA1005
NA1006
NA1007
NA1008
Ø INT. MM/INCH
51 / 2”
76 / 3”
102 / 4”
127 / 5”
WEIGHT KG/M
1.65
2.6
3.6
4.8
TEMPERATURE
— 40°C + 70°C
— 40°C + 70°C
— 40°C + 70°C
— 40°C + 70°C
NA1009
152 / 6”
6.9
— 40°C + 70°C
Other diameters upon request. Also available in ultra-light version.
NORBLAST® PINCH VALVE
REP. REF.
1
2
3
4
5
6
7
8
NA400
NA333
NA334
NA335
NA336
NA337
NA338
NA339
NA340
®
NA100
7
2
8
6
1
1
5
DESCRIPTION
Valve complete
Piston
Housing
Base
Sleeve
Scraper
Bolt
Washer
O-Ring
3
NA400
NORBLAST® Pinch Valve shuts air
and abrasive supply by pinching
abrasive blast hose.
NORBLAST® Pinch Valve are used
extensively around the world on
all Bulk Blasting units.
NORBLAST® METERING VALVE
4
Professional
2
5
REP.
3
7
6
22
1
2
3
4
5
6
7
REF.
NA100
NA104
NA105
NA106
NA107
NA108
NA109
NA110
4
DESCRIPTION
Metering valve complete
Washer
Metering valve base
Cover
Coupling
Washer
Stud ½”
Nut
Equipment
ABRASIVE BLASTING
ACCESSORIES
NORBLAST
WATER INJECTOR
CHECK VALVES
REF.
DESCRIPTION
NOB1402
Check valve 1/2”
NOB1401
NOB1400
Check valve 1 1/4”
Check valve 1 1/2”
All above safety
air relief valves are
delivered with lead
seal, in accordance
with European Safety
Regulations.
REF.
DESCRIPTION
NOB1115
Water injector
MOISTURE SEPARATORS
SAFETY AIR RELIEF VALVES
REF.
NOB1615
NOB1616
NOB1617
NOB1618
NOB1619
NOB1620
NOB1621
NOB1622
NOB1623
NOB1624
NOB1633
®
DESCRIPTION
Air relief valve ¼” – 8 bar
Air relief valve ¼” – 10 bar
Air relief valve 3/8” – 10 bar
Air relief valve 3/8” – 12 bar
Air relief valve 1/2” – 10 bar
Air relief valve 1/2” – 12 bar
Air relief valve 1” – 10 bar
Air relief valve 1” – 12 bar
Air relief valve 1 1/4” – 10 bar
Air relief valve 1 1/4” – 12 bar
Air relief valve 3/8” – 8 bar
REF.
DESCRIPTION
NQ1125
Air filter 1/2”
NQ1227
Air filter 1”
NQ1130
Air filter 1 1/4”
NQ1129
Air filter 1 1/2”
NQ1140
Auto drain
conversion kit
BLASTING LAMPS
REF.
NOB4050
NOB4053
NOB4051
NOB4054
NOB4052
NOB1264
NOB1262
NOB1263
DESCRIPTION
Blast light 20 W / 12 V complete
Blast light 20 W / 24 V complete
Light bulb 20 W for NOB4050
Light bulb 20 W for NOB4053
Antistatic lens
Electric cable 12 V - specify length
Electric plug 12 V male
Electric plug 12 V female
Fully insulated rubber housing and easy to mount
directly on the nozzle holder. Halogen lamp 20 W
- 12 Volt means safe operating. Antistatic plastic
lens and lamp can be changed without tools.
Delivered complete with 3 m cable, light-bulb and
fixing clamp.
NORBLAST® 6
NORBLAST® 6 is a lightweight portable dustfree unit for vacuum
blasting. With no moving parts, NORBLAST® 6 needs only compressed air and reusable abrasives, such as steel shot, grit, aluminium oxide, silicone carbides or glass beads.
NORBLAST® 6 will blast any surface and at the same time evacuate
dust and grindings by means of vacuum suction. Abrasive materials
will be recycled and reused.
NORBLAST® 6 will improve your working environment since the air
will be free from abrasives and dust.
NORBLAST® 6 is a very handy tool under cramped conditions. The
nozzle head is encased in a rubber cowl, which is applied at right
angles to the surface. Specially designed end-fittings are available
for angled surfaces, pipes, edges, welds, bolt heads, etc.
Flexible hose with dust collector and hood available.
TECHNICAL SPECIFICATIONS
Weight
Air pressure
Air consumption
Capacity
Blast pattern
Action mode
REF.
3 kg + 2 kg abrasive
6-7 bar / 90-100 psi
1.5 m3 min. / 50-60 cfm
2-5 m3 / hour - welding seams approx.
5 m per minute
Approximately 1 1/4” - 32 mm wide
360° swivel head, use at any angle
Professional
NOB6
23
DESCRIPTION
NORBLAST® 6 complete delivered
in plywood case.
Supplied with various blast heads
and dust bag, 5 m dust extension
hose and nozzle in tungsten carbide.
Equipment
®
NORBLAST
INTERNAL PIPE
CLEANERS NOB1/NOB2
®
NORBLAST® 1 - INTERNAL PIPE CLEANER 33 mm - 75 mm / 1 1/4” - 3”
The NORBLAST® 1 is used for direct mounting on ½” hose. For use in
pipes with inside diameters from 33 mm to 75 mm / 1 ¼” to 3”.
Move the internal pipe cleaner by pulling the hose. A deflection tip
divides the abrasive into a circular pattern hitting the surface at an
angle of 45°. Ideal for very light duty occasional jobs.
REP.
REF.
DESCRIPTION
-
NOB1
Internal pipe cleaner complete
1
NOB1434
Housing
2
NOB1442
Deflecting tungsten carbide tip
3
NOB1436
Washer
4
NOB1437
Bolt
NORBLAST® 2 - INTERNAL PIPE CLEANER 75 mm - 300 mm / 3” - 12”
The NORBLAST® 2 is used for internal pipe blasting on pipes
varying from 75 mm to 300 mm / 3” to 12”.
Move the internal pipe cleaner by pulling the hose. A deflection tip
divides the abrasive into a circular pattern hitting the surface at an
angle of 45°. Use 1 ¼” I.D. blast hose.
®
Professional
REP.
REF.
DESCRIPTION
-
NOB2
Internal pipe cleaner complete
1
NOB1440
Complete centering collar device
2
NOB1441
Centering carriage
3
NOB1442
Deflection tip tungsten carbide
4
NOB1443
Body
5
NOB1444
Support
6
NOB1445
Sleeve
7
NOB1446
Rod
8
NOB1447
Nut
9
NOB1448
Lock nut
10
NOB1449
Sleeve
11
NOB1450
Washer
12
NOB1451
Gasket
13
NOB1452
O-Ring
14
NOB1453
Bolt
15
NOB1454
Front collar
16
NOB1455
Rear collar
17
NOB1456
Bolt
18
NOB1457
Wheel
19
NOB1458
Nozzle 13 mm
19
NOB1459
Nozzle 16 mm
20
OX1010
Coupling
24
Equipment
INTERNAL PIPE
CLEANER NOB 3
NORBLAST
®
NORBLAST® 3 - INTERNAL PIPE CLEANER 200 mm - 900 mm / 8” - 36”
The NORBLAST® 3 is used for internal pipe blasting on pipes varying from 200 mm to 900 mm / 8” to 36”.
Two specially designed nozzles propel the unit’s rotating head while
blasting abrasive at high velocity into the pipe.
Since cleaning requirements vary, a range of different nozzles is
available.
Use 1 ¼” abrasive blast hose.
Nozzles to be ordered separately.
REP.
REF.
DESCRIPTION
REP.
REF.
DESCRIPTION
-
NOB3
Internal pipe cleaner complete
without nozzle
17
NOB1482
Bolt
18
NOB1483
Bolt
1
NOB1465
Nozzle head
19
NOB1484
Bolt
2
NOB1466
Plug
20
NOB1485
Carriage collar
3
NOB1467
Housing
21
NOB1486
Bolt
4
NOB1468
Pin
22
OX1010
Coupling
5
NOB1469
Brake
23
OX1021
Gasket
6
NOB1470
Tube
24
NOB1487
Leg 580 - 890 mm
7
NOB1471
Ring
25
NOB1488
Leg 380 - 580 mm
8
NOB1472
Bearing
26
NOB1489
Leg 260 - 380 mm
9
NOB1473
Seal
27
NOB1490
Leg 210 - 260 mm
10
NOB1474
Seal leather
28
NOB1491
Arm with wheels
10
NOB1475
Seal Teflon
29
NY60
Nozzle 1/4” - 6 mm length 45 mm
11
NOB1476
Coupling
30
NY80
Nozzle 5/16” - 8 mm length 45 mm
12
NOB1477
Washer TC
31
NY80/80
Nozzle 5/16” - 8 mm length 80 mm
13
NOB1478
Nipple - rubber lined
32
NY95/100
Nozzle 3/8” - 9,5 mm length 100 mm
14
NOB1479
Lock ring
33
NY95
Nozzle 3/8” - 9,5 mm length 45 mm
15
NOB1480
Housing
34
NOB1492
Wheel
16
NOB1481
Bolt
35
NOB1493
Centering carriage complete
Professional
25
Equipment
®
NORBLAST
®
SOFT SYSTEMS
NORSAB® POWDERS
The NORBLAST® SOFT systems have been developed by NOREXCO® in order to respond to the ever
increasing demand for soft blasting and cleaning, especially in urban environments.
This innovating concept enables to ecologically clean all types of surfaces, while fully respecting the integrity of the support.
Dry soft blasting and wet blasting, depending on the models, offer an excellent solution to such problems as graffiti removal,
cleaning of historical monuments, renovation of old buildings, renovation of old wood structures, cleaning of fragile surfaces,
etc... The possibilities offered by the NORBLAST® SOFT systems are almost unlimited !
The NORBLAST® SOFT systems are available in several different versions, with capacities ranging from 17 to 100 L
in order to perfectly meet the requirements of each job. Whether it is for small touch-up jobs or for larger scale cleaning,
NOREXCO® has a NORBLAST® SOFT system for you.
Please consult the following pages for full details.
The NORBLAST® SOFT systems will offer their highest performances when used with soft blasting powders of the NORSAB®
SOFTGOM range. Please refer to the following chart to select the powder for your application.
NORSAB® SOFTGOM BLASTING POWDERS
NORSAB® SOFTGOM is a new range of soft blasting powders developed specifically
by NOREXCO® in order to guaranty an optimum result with the NORBLAST® 17
SOFT, NORBLAST® 60 SOFT and NORBLAST® MINIMAX.
The packaging in 20 kg buckets makes the NORSAB® SOFTGOM powders easy
to use and protects them from humidity. Due to their extremely fine texture, the
NORSAB® SOFTGOM powders should only be used with totally clean and dry air.
The air delivered by the compressor should at least be processed through an air after
cooler before supplying the soft blasting system.
REF.
DESCRIPTION
NORSAB®
SOFTGOM 100
Softgom 201
White, neutral product, environmental-friendly.
Low level of abrasion.
NORSAB® SOFTGOM 200
Dark grey, neutral product, environmental-friendly.
Moderate level of abrasion.
NORSAB® SOFTGOM 201
Light grey, neutral product, environmental-friendly.
Higher level of abrasion.
®
Professional
26
Softgom 200
Equipment
Softgom 100
Minimax
NORBLAST
®
NORBLAST® Minimax is a new generation of sandblasting
systems specially designed for small maintenance jobs.
Thanks to the reduced size and lightweight design, it offers fast
and effective operation in virtually any condition.
NORBLAST® Minimax is fitted with a pressure regulator
for working air pressure adjustment, in order to regulate the
abrasive velocity at the nozzle output, resulting in more or less
aggressiveness on the surface.
The finish is unbeatable, especially with the usage of media
chosen in the NORSAB® Softgom range.
NORBLAST® Minimax must be used with an air compressor
offering a delivery of at least 24m3/h. If the nozzle chosen is
above 3mm, the compressor delivery will have to be higher.
The quality of the air supplied to the unit is critical. Too much
moisture in the compressed air will result in irregular abrasive
flow or abrasive outlet clogging. Refer to the instruction manual
for further information.
NORBLAST® Minimax is the ideal tool for occasional
sandblasting jobs on any kind of surfaces.
Possibilities offered by this unit are extremely wide and everybody
has been, is or will be in need of a NORBLAST® Minimax.
Key advantages of the NORBLAST® Minimax :
MULTI-FUNCTION / EFFICIENCY / SIMPLICITY / LIGHTWEIGHT
se
u
o
t
Easy
REFERENCE
MX9
DESCRIPTION
TECHNICAL SPECIFICATIONS
9 litres powder coated aluminium body fitted
with air pressure regulator, remote control,
moisture separator, abrasive metering valve,
3M complete working hose with gun and 3mm
nozzle. The tank capacity and design allow a
usage without any request of periodical test and
certification.
Professional
27
Capacity
9l
Dimensions : Length
300 mm
Width
300 mm
Height
600 mm
Weight
12 kg
Equipment
®
NORBLAST
NORBLAST® 17 SOFT is a dry cleaning and soft blasting
unit developed to ecologically clean all types of surfaces
while fully respecting the integrity of the support.
The use of the NORSAB® SOFTGOM 100 soft blasting
powder, specially developed by NOREXCO®, will fully
optimise the performances of the NORBLAST® 17 SOFT.
®
Soft 17l. System
NORBLAST® 17 SOFT IS THE BEST SOLUTION FOR
CLEANING SMALL SURFACES WITHOUT DAMAGING
THEM AND WITHOUT USING ANY CHEMICAL
PRODUCTS.
Key advantages :
 Very fine work at low pressure
NORBLAST® 17 SOFT is the ideal system for cleaning
a very wide range of surfaces such as natural stone, brick,
concrete, wood, copper, bronze, aluminium, etc...
 Working hose of small diameter, therefore very flexible
and easy to use
It is particularly recommended to eliminate graffiti and to
remove old paints on almost all types of surfaces found on
small and medium sized job sites.
 Total respect of the surface by using the NORSAB®
SOFTGOM 100 soft blasting powder.
NORBLAST®
 Functions with a compressor delivering 30 m3 / h for
3 bars of effective working pressure.
17 SOFT can operate at pressures from 0.5
to 7 bars, according to the jobs and to the output delivered
by the compressor. At low pressures, NORBLAST® 17 SOFT
offers the possibility of performing very fine work, opening
up a whole new world of possible applications.
 Low air consumption
 Very user-friendly. Very compact and lightweight unit.
 Excellent result with the screw-type compressor
AIRPLUS®APV55 (not included, available as an option).
TECHNICAL SPECIFICATIONS
Blasting unit :
Capacity
Dimensions : Length
Width
Height
Weight
17 l
500 mm
700 mm
800 mm
49 kg
Air after cooler :
Admissible delivery
Delivery ventilator
Diameter in / out
Dimensions : Length
Width
Height
Weight
1 200 l/ min - 72 m3/h
500 m3/h
1" –1/2
650 mm
250 mm
700 mm
19 kg
®
Professional
REFERENCE
DESCRIPTION
17 liter unit, equipped with an
air pressure regulator, remote
control,
moisture
separator,
metering valve, 10 m work hose
complete with a 3 mm nozzle.
NOB17SOFT
28
Pneumatically operated air after
cooler with moisture separator on
the output, 3 m hose to connect
to the blasting unit and 5 m hose
to connect to the compressor.
Equipment
Soft 60l. System
NORBLAST
NORBLAST® 60 SOFT is a cleaning and soft-blasting unit. It can
blast wet and dry and is specially developed to ecologically clean
all types of surfaces, while perfectly respecting the integrity of the
support.
The combined use of an air aftercooler successfully limits the
condensation and formation of humidity inside the tank, therefore
enabling the use of extremely fine soft abrasive powders.
A range of special soft blasting abrasive powders has been
developed by NOREXCO®. Please refer to the NORSAB®
SOFTGOM range in order to optimise the performances of your
NORBLAST® SOFT system.
NORBLAST® 60 SOFT is the ideal system for cleaning and
decontaminating a very wide range of surfaces such as natural
stone, brick, concrete, wood, tiles, copper, bronze, aluminium,
stainless steel, etc...
It is particularly recommended to clean stone, brick or concrete
facades, to remove varnishes on wood, to eliminate graffiti and to
remove old paints on all types of surfaces found on medium sized
job sites.
NORBLAST® 60 SOFT can operate at pressures from 0.5
to 7 bars, according to the jobs and to the output delivered by
the compressor. The compressor (not included) to be used in
conjunction with a NORBLAST® 60 SOFT should have a delivery
of at least 130 m3 / hour (Type AIRPLUS® APV130), the ideal being
at least 180 m3 / h.
®
At low pressures, NORBLAST® 60 SOFT offers the possibility
of performing very fine work, opening up a whole new world of
possible applications.
NORBLAST® 60 SOFT IS THE BEST SOLUTION FOR
CLEANING SURFACES WITHOUT DAMAGING THEM AND
WITHOUT USING ANY CHEMICAL PRODUCTS.
Key advantages :
 Soft Blasting dry or wet
 Simple connection to a standard water supply for wet blasting
 Low water consumption (15 l / h)
 Very simple start-up and operating
 Possibility of very fine work at low pressure
 System including an air aftercooler, enabling the use of very fine soft
blasting powders, while limiting the risks of condensation in the tank.
 Total respect of the surfaces with use of soft blasting powders
selected in the NORSAB® SOFTGOM range
 Very compact and lightweight unit
 Possibility of working with an AIRPLUS® APV130 compressor,
delivering 130 m3/h for 3 bars of effective working pressure.
 Environment-friendly.
TECHNICAL SPECIFICATIONS
Blasting unit :
Capacity
Dimensions : Length
Width
Height
Weight
60 l
700 mm
700 mm
1140 mm
75 kg
Air after cooler :
Admissible delivery
Delivery ventilator
Diameter in / out
Dimensions : Length
Width
Height
Weight
3 000 l/ min - 180 m3/h
2980 m3/h
1" –1/2
750 mm
220 mm
780 mm
30 kg
Professional
REFERENCE
NOB60SOFT
29
DESCRIPTION
60 liter unit, equipped with an air
pressure regulator, remote control,
moisture separator, metering valve,
20 m work hose complete with
a 6mm special water induction
nozzle and water supply hose.
Pneumatically operated air after
cooler with moisture separator on
the output, 5 m hose to connect to
the blasting unit and 10 m hose
to connect to the compressor.
Equipment
®
NORBLAST
®
AIR COOLERS
AND COMPRESSORS
NORCOOL® AIR COOLED AFTERCOOLERS
The compressed air discharged by a compressor contains a considerable quantity of water vapour. If not removed, much of
it will condense in the distribution system, sandblasting tank or air operated equipment.
The NORCOOL® aftercoolers are specially designed to eliminate a significant proportion of the water contained in the
compressed air.
Compressed air flows through the tubes of the heat exchanger in counter-flow of the ambient air stream blown across by the
fan. As the compressed air cools, a part of the water vapour condenses.
The condensed water is precipitated out of the aftercooler in the moisture separator where it is discharged from the system.
Electric or pneumatic driven fans are available on each model.
CAPACITY
REFERENCE
NC100E - NC100P
NC160E - NC160P
NC250E - NC250P
NC360E - NC360P
NC560E - NC560P
NC700E - NC700P
NC750E - NC750P
NC1000E
NC1600E
NC1750E
NC2100E
NC2800E
WEIGHT
m3/H
L/mn
CFM
kg
216
324
510
720
960
1.200
1.500
1.800
2.700
3.000
3.600
4.800
3.600
5.400
8.500
12.000
16.000
20.000
25.000
30.000
45.000
50.000
60.000
80.000
100
160
250
360
560
700
750
1.000
1.600
1.750
2.100
2.800
26
39
40
86
88
90
135
135
135
140
155
165
E=Electric P=Pneumatic / MAXIMUM WORKING PRESSURE : 16 BARS
AIRPLUS® COMPRESSORS
AIRPLUS® APV55 and APV130 are job-site compressors using lubricated screws and a gasoline engine. They offer an
incomparable lifetime and a very high level of efficiency compared to the piston-type compressors that are generally used for
applications requiring compressors with low or medium deliveries.
AIRPLUS® APV55 and APV130 are perfectly suited for the air supply of all the texture coating equipment of the NORTEX®
range, as well as the soft blasting systems of the NORBLAST® SOFT range. The gasoline engine offers full autonomy on all
types of job sites.
AIRPLUS® APV55 and APV130 also offer the following key advantages : mounting on base frame with over-sized wheels,
handling frame and safety guards to fully protect all the sensitive parts of the compressor, high quality components.
AIRPLUS® APV55 and APV130 are the best choice for building companies looking for mobile compressors, easy to move
around and designed to meet their exact requirements.
SPECIFICATIONS
True delivery
Regulation
Back-up tank
Gasoline Engine
Consumption
Electric start-up
Key-type start-up
Start-up battery
Charge alternator
Safety check for lack of oil
Dimensions :
Length
Width
Height
Weight
®
APV55
55 m3/h
6 / 8 bars pneumatic
5l
11 HP HONDA 4-stroke
2.5 l/h
yes
yes
yes
yes
yes
APV130
130 m3/h
6 / 8 bars electric
20 l
24 HP HONDA 4-stroke
6.5 l/h
yes
yes
yes
yes
yes
1000 mm
600 mm
700 mm
110 kg
1000 mm
650 mm
800 mm
160 kg
Professional
30
Equipment
ALLBLAST®
PRO+
NORBLAST
®
The new ALLBLAST® PRO+ developed by NOREXCO®
replaces the old ALLBLAST® range. Based on a solid knowhow in the abrasive blasting market, as well as its experience
acquired with the first generation of ALLBLAST® since 1995,
NOREXCO® has improved and further developed the concept
in an astonishing way.
Highly efficient, the ALLBLAST® PRO+ considerably reduces
the amount of dust generated during blasting.
Very simple to operate and to adjust, the ALLBLAST® PRO+
is extremely reliable and will with no doubt enable you to
successfully accomplish all your blasting jobs.
All types of non soluble abrasives and aggregates can
be used, with a wide range of granulate rates. Weather
conditions are not an issue : work can be done even in rainy
conditions and operating is possible down to 0°C.
Entirely pneumatic, therefore requiring no electrical power
supply, the ALLBLAST® PRO+ can be used on a wide variety
of jobs, including very sensitive jobs such as refineries,
petroleum storage tanks, offshore dwelling platforms,
historical monuments, etc...
Offering an improved adjustment and far more possibilities
than the older generation, together with an extreme
simplification of the handling functions, the ALLBLAST® PRO+
is the on-site solution for the most demanding companies.
Key advantages :
 Fine dusts are reduced by more than 95%.
 Water and abrasive mixed inside the tank.
 Reduced consumption of abrasive.
 Highly reduced water consumption and
possibility of adjustment.
 Reduced operating and maintenance.
 Silent system, with a reduced sound level.
 Reduced maintenance.
 Entirely pneumatic system; no electrical
supply needed.
 Easy disassembly of metering valve and quick
REFERENCE
NABN100CE
access to lower outlet.
DESCRIPTION
 Blasting pot entirely galvanised, inside and
100 liter unit complete, equipped with
top cover, filter screen, two air hoses
Ø 19mm with couplings, valve and
coupling for water supply, air filter,
control box, overflow purge valve,
pressure relief system, metering valve
and piloting switch, 20 m work hose
complete Ø 25mm with control hose
and connecting plug, nozzle SX95,
nozzle holder, visor with ear and eye
protection.
outside, then powder-coated.
TECHNICAL SPECIFICATIONS
Capacity
Dimensions : Length
Width
Height
Weight
100 l
1100 mm
850 mm
1300 mm
158 kg
ASK YOUR DEALER FOR THE COMPLETE SEPARATE ALLBLAST® PRO+ DOCUMENTATION.
Professional
31
Equipment
®
NORBLAST
®
BULK BLASTING
AND RECOVERY
NORBLAST® BULK BLASTING SYSTEMS
NOREXCO® is one of the world leaders in bulk blasting. Mobile trailermounted or stationary units from 4-46 tons, either single or double
chambers, and with 2-8 operators, permit large-scale blasting on big
work sites such as shipyards, the petrochemical industry, oil industry
and any building site which requires a high production rate.
Operation costs can be considerably reduced and the abrasive materials handled in bulk, eliminating numerous shut down periods, thus
increasing the production rate.
NORBLAST® bulk blast systems can be designed to suit your
requirements.
NORBLAST® VACUUM RECOVERY SYSTEMS
NOREXCO® manufactures a wide range of recovery systems with
capacities from 4-12 tons/hour and with efficiency up to 28” of mercury. In conjunction with specially designed collection tanks, even the
toughest job site becomes accessible with ease. All types of spent abrasives can be handled as well as any type of transfer of abrasives from
one point to another. All systems are designed to remove large quantities from even the deepest tanks into collection tanks, always keeping
the job site clean.
ASK NOREXCO® FOR FURTHER DETAILS
YOUR DEALER :
®
NOREXCO S.A.
16, rue des Chasseurs Z.I. Internationale
74100 VILLE-LA-GRAND - FRANCE
Tel. +33 450 38 37 36 - Fax +33 450 92 88 44
www.norexco.com - e-mail : [email protected]
TECHNICAL INFORMATION SUBJECT TO CHANGE WITHOUT NOTICE - COPYRIGHT REPRODUCTION PROHIBITED
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement