LUMEL N13 power network parameter meter Service manual

Below you will find brief information for power network parameter meter N13. This meter measures all basic parameters in three-phase three-wire or three-phase four-wire, balanced or unbalanced electrical power networks. It displays measured quantities and transmits their values digitally. It can be used in data acquisition networks or as a single meter for various electrical parameters, optimizing power electronic devices, systems, and industrial installations.

PDF Download
Document
Power Network Parameter Meter N13 Service Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Measures all basic parameters in three-phase electrical power networks
  • Displays measured quantities
  • Transmits values digitally
  • Can be used in data acquisition networks
  • Optimizes power electronic devices, systems, and industrial installations
  • Measures RMS voltage & current, active, reactive & apparent power, active, reactive & apparent energy
  • Measures power factors, frequency, relative harmonics content of voltage & current
  • Provides 15-minute mean active power
  • Has RS-485 interface for communication with master systems
  • Can convert chosen quantities to a standard analog current signal

Frequently asked questions

It can measure three-phase three-wire and three-phase four-wire networks, both balanced and unbalanced.

It measures and displays RMS voltage and current, active, reactive, and apparent power, active, reactive, and apparent energy, power factors, frequency, and relative harmonics content of voltage and current. It also provides 15-minute mean active power.

It has an RS-485 interface that allows communication with master systems using the MODBUS transmission protocol.

Yes, it can be used as a single meter to replace multiple individual meters such as ammeters, voltmeters, wattmeters, and others.
Preparing document for printing…
0%