Shark BDE 505009B, BDE 505009C, MPE5 50024B, 50024C, HD 5.0/50 Eb CAGE, HD 5.5/50 Ec CAGE, BRE 505007B, BRE 505007C Pressure Washer Service manual
Below you will find brief product information for BDE 505009B, BDE 505009C, MPE5 50024B, MPE5 50024C, HD 5.0/50 Eb CAGE, HD 5.5/50 Ec CAGE, BRE 505007B, BRE 505007C. The Shark Pressure Washers is designed to make cleaning easier for the tough jobs around your home, from cleaning your car, deck, or driveway to general maintenance around the house and yard. This pressure washer is capable of moving water at high pressure to remove dirt, grime, and other debris from a variety of surfaces.
PDF
Download
Document
Advertisement
Advertisement
SERVICE MANUAL LIS T E D MODEL # BDE-505009B BDE-505009C MPE5-50024B MPE5-50024C HD 5.0/50 Eb CAGE HD 5.5/50 Ec CAGE BRE-505007B BRE-505007C ® ORDER # 1.107-085.0 1.107-086.0 1.106-001.0 1.106-002.0 1.107-084.0 1.107-087.0 1.106-060.0 1.106-059.0 9.800-415.0 CONTENTS Exploded View ..............................................................................................4 Exploded View, Parts List ..........................................................................5-6 Electrical Box Exploded View andParts List .................................................7 VBA Unloader ...............................................................................................8 Hose & Spray Gun AssemblyTroubleshooting ..............................................9 H Series Pump Exploded View and Parts List .......................................10-11 Troubleshooting ..........................................................................................12 230 VCA Electric Diagram ..........................................................................13 460 VCA Electric Diagram ..........................................................................14 Model Number ______________________________ Serial Number ______________________________ Date of Purchase ___________________________ The model and serial numbers will be found on a decal attached to the pressure washer. You should record both serial number and date of purchase and keep in a safe place for future reference. 3 9.800-415.0 • Rev. 04/13 PRESSURE WASHER Troubleshooting Guide EXPLODED VIEW 6 46 53 53 46 38 35 9 1 37 32 39 18 22 83 84 36 11 50 29 71 53 46 64 76 49 26 33 55 53 54 46 13 25 14 63 62 41 61 72 20 22 12,15 20 80 74 77 34 50 23 21 19 55 79 47 10 73 58 82 72 24 44 3 40 28 5 49 85 4 52 48 16 86 59 17 43 87 88 31 27 69 78 8 30 70 54 54 2 7 30 45 55 81 55 44 56 50 51 67 57 52 65 75 42 48 66 68 60 42 48 4 9.800-415.0 • Rev. 04/13 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION 1 8.932-965.0 2 Label, Warning-Exposed Pulleys 1 31 9.803-810.0 9.803-842.0 Label, Operating Instr. (Lexan) 1 3 9.803-993.0 Label, Relieve Pressure 1 4 9.803-994.0 Label, Equipment Operated 1 by Trained 9.803-813.0 5 8.932-967.0 Label, Nozzle, 0, 15, 25, 40, 1 & Soap 9.802-311.0 Nozzle, SAQCMEG 0004.5, Red Nozzle, SAQCMEG 15045, Yellow Nozzle, SAQCMEG 25045, Green Nozzle, SAQCMEG 4004.5, White Nozzle Compl, QCEM-6540 Brass 6 8.750-465.0 8.901-144.0 9.800-047.0 8.900-870.0 Label, MVC Frame, Logo Label, Logo, Belt Guard, BD Label, Belt Guard, HD Label, Logo, BR 1 1 1 1 9.800-013.0 Label, Intended For Indoor Use 1 7 9.803-811.0 9.803-812.0 32 9.800-040.0 9.802-487.0 33 8 9.800-034.0 Label, Clear Lexan, 2-1/4" x 4-1/2" 1 9 9.800-036.0 Label, Warning, Pictorial, Small 1 10 9.802-011.0 Nipple, 3/8" Hex Steel 1 11 9.802-030.0 Elbow, 3/8" Street, Female 1 12 9.802-036.0 Nipple, 1/2" JIC, 3/8" Pipe 13 14 15 8.751-012.0 8.749-518.0 8.749-519.0 9.804-491.0 QTY 1 1 1 1 1 Motor, 20HP, 3Ph, 230/460V 1 1800 Rpm, EM251 ▲ Label, Ground (Motor) 1 ▲ Wire Nut, Brown 6 (230V/3PH) Pump, Landa LH5050/R , 5@5000, 1650 RPM Pump, Hotsy, HH5050/R, 5@5000, 1650 RPM Pump, Kärcher KH5050/R 5@5000, 1650 RPM 1 1 1 34 9.802-360.0 Unloader, PA 10.5 GPM @ 5100PSI, VB350/4 1 1 35 9.802-394.0 Pulley, 3TB40 1 9.802-037.0 Nipple, 1/2" JIC, 3/8" Female 1 36 9.803-979.0 Pulley, 3BK 50 H 1 9.802-039.0 Elbow, 1/2" JIC, 3/8", 90° 1 37 9.802-403.0 Bushing, H x 25MM 1 9.802-048.0 Swivel, 1/2" JIC Fem, 3/8" Male 1 38 9.803-980.0 Bushing, P1 x 1-5/8" 1 39 8.749-965.0 Belt, 3/BX 42 1 40 9.803-992.0 Cord,Service,SO,4/4 (230V/3PH) Cord, Serv, SEO 10/4, Coleman (460V) 16 9.802-064.0 Grommet, Rubber, Nozzle Holder 5 17 9.802-070.0 Grip, 1" Sqr, Handle, 2 18 9.802-126.0 Plug 1/2" JIC 1 19 9.802-118.0 Tee, 1/2" Branch Male 1 20 9.802-131.0 Elbow, 1/2" JIC x 1/2", 90° 2 21 9.802-146.0 Swivel, 1/2" MP x 3/4" GHF 1 w/Strainer 22 9.802-151.0 Swivel, 1/2" JIC Fem, Push-On 2 23 9.802-163.0 Strainer, 1/2" PA, Inline Plastic 1 24 9.802-168.0 Nipple, 3/8" Fem, 11,000 Psi 1 25 9.802-182.0 Pump Protector, 1/2" Ptp 26 9.803-843.0 Valve, Safety Relief, 6000 Psi1 47 27 9.802-204.0 9.802-206.0 Clamp, Hose (460V) Clamp, Hose (230V) 48 28 9.802-071.0 Trim, 750 x 1/16", Black 1.66 ft. 49 29 8.918-421.0 Hose, 3/8" x 14", 2 Wire, Pressure Loop 1 30 9.802-271.0 Wheel & Tire Assy, 6" Steel Rim w/Tube 4 1 1 1 9.802-437.0 41 9.804-052.0 9.803-279.0 9.803-280.0 42 9.802-705.0 PRESSURE WASHER SERVICE MANUAL EXPLODED VIEW PARTS LIST 15 ft 15 ft Connector, 1" Cord, 50 Amp 1 (230V/3PH) Strain Relief, 1", 460V 1 Locknut, 1" 1 Bolt, Carriage, Zinc, 1/4-20 x 1.0 PLT 4 43 9.802-722.0 Bolt, 5/16" x 1", NC HH 4 44 9.802-720.0 Bolt, 3/8" x 1", NC HH 8 45 9.803-845.0 Bolt, 1/2" x 5" NC HH TAP, All Thread 1 46 9.802-765.0 Screw, 1/4" x 1/2" BH SOC 5 9.802-770.0 Screw, 1/4" x 1", BH SOC 4 9.802-773.0 Nut, 1/4" ESNA, NC 8 9.802-776.0 Nut, 5/16", ESNA, NC 8 50 9.197-003.0 Nut, 3/8", ESNA, NC 10 51 9.802-782.0 Collar, 5/8" Bore Shaft 8 52 9.802-802.0 Washer, 1/4" Flat, SAE 16 ▲ Not Shown 5 9.800-415.0 • Rev. 04/13 PRESSURE WASHER SERVICE MANUAL EXPLODED VIEW PARTS LIST QTY ITEM PART NO. DESCRIPTION Washer, 1/4" Flat, SAE, Black Zinc 5 71 9.802-259.0 Hose, 1/2" Push-On 15" 72 9.803-992.0 Washer, 5/16" Flat, SAE 12 55 9.802-807.0 Washer, 3/8" SAE, Flat 16 Cord, Service 4/4 (230V/3PH) Cord, Service 10/4 (460V/3PH) 37" 9.802-804.0 56 9.802-810.0 Washer, 5/8" Flat, SAE 8 57 9.802-820.0 Washer, Nylon Spacer, 0.656 x 1.25 x 0.65 4 ITEM PART NO. DESCRIPTION 53 9.802-803.0 54 9.802-437.0 QTY 37" 73 9.802-124.0 Plug, 1/4" Countersunk 1 74 9.802-728.0 Bolt, 3/8" x 2" 2 75 8.932-969.0 Label, Warning, Service Cord 1 76 9.802-765.0 Screw, 1/4" x 1/2" BH SOC CS 2 77 9.802-148.0 Adaptor, 1/2" x 1/2" 1 78 9.800-049.0 Label, Manufacturer’s Cleaning Solution 1 58 9.802-870.0 Block, Unloader, 3/8" x 3/8", 1 1.25, Steel 59 9.802-964.0 8.912-486.0 Assy, Weld, Cage, CW Black 1 Assy, Weld, Cage, CW Red 1 60 9.802-966.0 Handle, Brake, CW Cage, Black Handle, Brake, CW Cage Red 1 79 9.802-744.0 Bolt, 10mm x 20mm, HH 4 Assy, Weld, Motor Rail, Elec, CW Large, Black Assy, Weld, Motor Rail, Elec, CW Large, Red 1 80 9.802-816.0 Washer, 7/16", Lock Split Ring 4 1 81 9.802-809.0 Washer, 1/2" 1 82 9.802-226.0 Assy, Downstream Injector 1 83 9.802-259.0 Hose, 1/2" Push-On 8.912-495.0 61 9.804-008.0 8.917-411.0 1 62 9.804-009.0 Assy, Weld, Elec, Guard Rear, CW Large 1 63 9.804-010.0 Assy, Weld, Slider, Elec, CW Large, Black Assy, Weld, Slider, Elec, CW Large, Red 1 8.917-412.0 1 64 9.804-011.0 Guard, Belt, Front, Elec, CW Large 1 65 9.802-996.0 8.912-019.0 Bracket, Brake Pad, Black Bracket, Brake Pad, Red 1 1 66 9.802-997.0 8.912-020.0 Linkage, Brake, Black Linkage, Brake, Red 1 1 67 8.918-839.0 Axle, Lrg, Cw Cage 31.25" 2 68 9.804-012.0 Bracket, E-Box, CW Cage, Large, Black Bracket, E-Box, CW Cage Large, Red 1 8.917-493.0 69 9.802-759.0 9.802-770.0 70 9.802-695.0 9.802-773.0 20" 84 9.802-156.0 Push-On 1/2" x 3/8" 1 85 9.802-771.0 Screw 10/32" 1 86 9.802-203.0 Clamp 1/2" 1 87 9.802-802.0 Washer 1 88 9.804-567.0 Nut 10/32" 1 1 Screw, 10/32" x 1/2" Bhsoc 1 (460V/3PH) Screw, 1/4" x 1", Bh Soc Cs 1 (230V/3PH) Nut, 10/32" Keps 460V/3Ph 1 Nut, 1/4" ESNA, Nc 1 (230V/3PH) 6 9.800-415.0 • Rev. 04/13 PRESSURE WASHER SERVICE MANUAL EXPLODED VIEW - ELECTRICAL BOX 16 4 13 5 12 14 18 2 3 17 19 15 15 16 20 7 8 1 9 11 9.800-415.0-3 6 10 ELECTRICAL BOX PARTS LIST ITEM PART NO. DESCRIPTION 1 8.900-315.0 Label, On/Off, PE Push Buttons 1 Label, Disconnect Power Supply 1 1 2 9.800-016.0 QTY ITEM PART NO. DESCRIPTION 10 9.803-974.0 Switch, Green PB, CH E22PB3 QTY 1 11 9.803-973.0 Switch, Red PB, CH E22EB2 1 12 8.724-284.0 8.724-281.0 Contactor 1 (230V/3PH) Contactor (460V/3PH) 1 1 1 1 3 9.800-040.0 Label, Ground 4 8.933-007.0 Fuse, KTK-R1 600V Midget Fuse (230V/3PH) 2 Fuse, KTK-R-1/2 600V Midget Fuse (460V/3PH) 2 13 8.724-307.0 8.724-305.0 Overload (230V/3PH) Overload (460V/3PH) 14 9.802-551.0 Transformer, Micron, 240/480V120V,50/60HZ,.050KVA 1 15 9.802-695.0 Nut, 10/32" Keps 16 9.802-750.0 Screw, 8-32 x 1/2" M TPG PH PNH, Black 7 17 9.802-759.0 Screw, 10/32" x 1/2" BHSOC Black 4 18 9.802-762.0 Screw, 10/32" x 11/4" RH, SL, Black 1 19 9.803-990.0 Standoff, CW Cage, Lrg. MPE1 20 9.802-457.0 Din Rail, 35mm 9.802-462.0 5 9.802-463.0 Fuse, Paper, Buss FNM-1/2, 250V Midget TD 1 6 9.803-976.0 Box, Plastic, 10X8X6.19, RVJ1008W 7 9.804-052.0 9.803-280.0 9.802-518.0 9.802-526.0 1 Connector, 1" Cord, 50 Amp (5-50024B) 2 Locknut, 1" Cond. (230V/3PH) 2 Strain Relief, 3/4" (460V/3PH) 2 Locknut, 3/4" Conduit (460V/3PH) 2 8 9.802-534.0 Block, Contact, N/C, CH E22B1 1 9 9.802-535.0 Block, Contact, N/O, CH E22B2 1 9.800-415.0 • Rev. 04/13 7 3" 7 9.802-360.0 VB350/4 10.5 GPM at 5100 PSI SERVICE MANUAL PRESSURE WASHER VB UNLOADER EXPLODED VIEW VB UNLOADER EXPLODED VIEW PARTS LIST ITEM PART # 1 2 * DESCRIPTION QTY ITEM PART # 3/8 Bsp F Nipple 1 16 O-Ring, 1.78 x 15.6 mm 2 17 * QTY VB280-350 Val. Pist. Seal 1 M8 Piston 1 3 Spring 1 18 Sst 11/32" Ball 1 4 SST Check Valve 1 19 Spring Guide 1 * O-Ring, 3 x 6mm 1 20 4.5 x 47 mm Spring (60.1700.00) 1 VB280-350 Brass Body 1 21 Brass Cap 1 7 * Seat 1 22 8 * M 8 Shutter 1 VB350.4 Red Plastic Knob (60.1700.00) 1 9 * O-Ring, 1.78 x 17.17 mm 1 Spacer 1 5 6 10 11 * VB280-350 Val. Pist. Seal 1 12 * O-Ring, 1.78 x 20.35 mm 1 13 Piston Housing (60.1700.00) 1 14 M 4 x 4 mm Dowel 1 15 Lock Nut 1 * DESCRIPTION * Available in Repair Kit : K1 9.800-106.0 VB350 Repair Kit 8 9.800-415.0 • Rev. 04/13 PRESSURE WASHER SERVICE MANUAL HOSE & SPRAY GUN ASSEMBLY 1 3 2 9 6 6 7 4 8 5 9.800-415.0-4 HOSE & SPRAY GUN ASSEMBLY PARTS LIST ITEM PART NO. DESCRIPTION 1 9.802-228.0 Gun w/Wand (5000 PSI), w/Coupler 2 8.739-346.0 8.918-088.0 8.739-322.0 3 9.803-810.0 9.803-811.0 9.803-812.0 9.803-813.0 9.802-311.0 QTY ITEM PART NO. DESCRIPTION QTY 4 9.802-251.0 Hose, 1/4" x 1/2" Clear Vinyl 6 ft. 1 Hose, 3/8" x 50', 2 Wire, TS KA, SO-SW HP CP (BRE, HD) 1 Hose, 3/8" x 50', 2W,TS,SO-SW HIGH PRESS CP (MPE) 1 Hose, 3/8" x 50' 2W TS, HO, SO-SW, HP CP (BDE) 1 Nozzle, SAQCMEG 0004.5, Red 1 Nozzle, SAQCMEG 15045, Yellow 1 Nozzle, SAQCMEG 25045, Green 1 Nozzle, SAQCMEG 4004.5, White 1 Nozzle COMPL, QCEM-6540 Brass 1 5 9.802-160.0 Strainer, Plastic, 1/4" Hose Barb 6 9.802-167.0 Coupler, 3/8" Fem, 11,000 PSI, Snap-Tite 1 7 9.802-168.0 Nipple, 3/8" Fem, 11,000 PSI 1 8 6.390-126.0 Clamp, Hose, .46-.54 ST 2 9 9.802-167.0 Injector, SS, Non Adj, 2.0-4.0 GPM, 5500 PSI 1 1 9 9.800-415.0 • Rev. 04/13 PRESSURE WASHER SERVICE MANUAL H-SERIES PUMP EXPLODED VIEW TORQUE SPECS ITEM # FT. LBS. 15 135 16 60 25 18 35 4.5 46 30 51 7.6 H-SERIES PUMP EXPLODED VIEW PARTS LIST ITEM PART NO. DESCRIPTION QTY 1 9.803-163.0 ITEM PART NO. DESCRIPTION Crankcase 1 17 9.802-890.0 Lock Washer 2 8 9.803-195.0 Plunger Guide 3 18 9.803-198.0 Copper Washer 3/8 1 3* See Kit Below Plunger Oil Seal 3 19 9.802-925.0 Brass Plug 3/8 2 4* See Kits Below O-Ring Ø1.78 x 37.82 3 24 9.802-884.0 Washer 8 5* See Kits Below Pressure Ring 18mm 3 25 9.802-944.0 Hex Screw 8 6* See Kit Below U Seal, Dia. 18 x 28mm 3 26 9.804-501.0 Closed Bearing Housing 1 7* See Kits Below Support Ring 18mm 3 27 9.803-186.0 O-Ring Ø2.62 x 71.12 2 8* See Kits Below U Seal, Dia 18 x 28mm 3 28 9.804-502.0 Roller Bearing 2 9 9.802-926.0 Brass Plug, 1/2 1 29 9.803-289.0 Crankshaft 1 10 9.803-199.0 Copper Washer 1/2 1 30 9.803-293.0 Crankshaft Key 1 11 8.717-516.0 Manifold Housing 1 31 9.802-923.0 Oil Dip Stick 1 12* 9.804-498.0 O-Ring Ø2.62 x 17.13 12 32 9.803-139.0 Crankshaft Seal 1 13* See Kit Below Valve Assembly 6 33 9.803-177.0 Shim 2 14* 9.804-500.0 Teflon Ring 6 34 9.804-503.0 Bearing Housing 1 15 9.803-292.0 Valve Plug 6 35* 9.802-936.0 Plunger Bolt 3 16 9.802-942.0 Manifold Stud Bolt 8 36* 9.802-885.0 Copper Spacer 3 10 9.800-415.0 • Rev. 04/13 QTY PRESSURE WASHER SERVICE MANUAL H-SERIES PUMP EXPLODED VIEW PARTS LIST ITEM PART NO. DESCRIPTION QTY 37* 9.803-188.0 O-Ring Ø1.78x7.66 3 38* 9.803-155.0 Teflon Ring 3 39* See Kit Below Plunger 18mm 3 40* 9.802-888.0 Copper Spacer 3 41 9.803-294.0 Plunger Rod 3 42 9.803-157.0 Connecting Rod 3 43 9.802-912.0 Snap Ring 6 44 9.802-915.0 Connecting Rod Pin 3 45 9.802-889.0 Spring Washer 6 46 9.802-937.0 Connecting Rod Screw 6 47 9.803-194.0 O-Ring Ø2.62 x 152.07 1 48 9.803-166.0 Crankcase Cover 1 49 9.803-197.0 Gasket, G3/8 1 50 9.803-202.0 Sight Glass G3/4 1 51 9.802-939.0 Cover Screw 5 * Available in kit (See below) KIT NUMBERS 9.804-492.0 9.804-493.0 9.802-629.0 9.802-604.0 9.802-606.0 KIT DESCRIPTION Plunger Seal 18 mm Seal Packing 18 mm Plunger 18 mm Complete Valve Plunger Oil Seals ITEMS NUMBERS INCLUDED 4, 6, 8 4, 5, 6, 7, 8 35, 36, 37, 38, 39, 40 12, 13, 14 3 3 1 1 6 3 NUMBER OF CYLINDERS KIT WILL SERVICE 11 9.800-415.0 • Rev. 04/13 PRESSURE WASHER Troubleshooting Guide TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION PUMP RUNNING NORMALLY BUT PRESSURE LOW ON INSTALLATION Pump sucking air Check water supply and possibility of air seepage. Check valves sticking Check and clean or replace if necessary. Unloader valve seat faulty Check and replace if necessary. Nozzle incorrectly sized Check and replace if necessary. Worn piston packing Check and replace if necessary. Valves worn Check and replace if necessary. Blockage in valve Check and clean out if necessary. Faulty or misadjusted unloader valve Tampering with the factory setting may cause personal injury and/or property damage, and will void the manufacturer's warranty. Pump sucking air Check water supply connections. Worn piston packing Check and replace if necessary. Insufficient water Check filter and hose for breakage. Nozzle worn Check and replace if necessary. Suction or delivery valves worn Check and replace if necessary. Suction or delivery valves blocked Check and clean if necessary. Unloader valve seat worn Check and replace if necessary. Worn piston package Check and replace if necessary. Air in suction line Check water supply and connections on suction line. Broken or weak suction or delivery valve spring Check and replace if necessary. Foreign matter in valves Check and clean if necessary. Worn bearings Check and replace if necessary. Excessive temperature of water Reduce to below 140°F. Oil seal worn Check and replace if necessary. High humidity in air Check and change oil twice as often. Piston packing worn Check and replace if necessary. Piston packing worn Check and replace if necessary. O-Ring plunger retainer worn Check and replace if necessary. WATER DRIPPING FROM PUMP PROTECTOR Water supply pressure too high (over 90 psi) Lower water supply pressure using a regulator. Spray gun is in the off position for over 1-2 minutes Turn machine off if not in use for over 1-2 minutes. OIL DRIPPING Oil seal worn Check and replace if necessary. FLUCTUATING PRESSURE PRESSURE LOW AFTER PERIOD OF NORMAL USE PUMP NOISY PRESENCE OF WATER IN PUMP OIL WATER DRIPPING FROM UNDER PUMP EXCESSIVE VIBRATION Irregular functioning of the pump IN HIGH-PRESSURE valves HOSE 12 9.800-415.0 • Rev. 04/13 Check and replace if necessary PRESSURE WASHER SERVICE MANUAL 230 VCA ELECTRIC DIAGRAM 13 9.800-415.0 • Rev. 04/13 PRESSURE WASHER SERVICE MANUAL 460 VCA ELECTRIC DIAGRAM 14 9.800-415.0 • Rev. 04/13 Form #9.800-415.0 • Revised 04/13 • Printed in U.S.A. or Mexico ">

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- High Pressure Cleaning
- Powerful 20 HP Motor
- Convenient Cage Design
- Built-in Unloader Valve
- Adjustable Nozzle
- Easy-to-use Controls
- Durable Construction
- Wide Range of Applications
Frequently asked questions
The pressure rating will vary depending on the specific model. Please refer to the specifications of the model you purchased.
The nozzle is typically located on the end of the hose. Twist the nozzle counter-clockwise to remove it and twist a new nozzle clockwise to attach it.
We recommend using a detergent that is specifically designed for pressure washers to avoid damaging your machine.