Featured Products Catalog
Featured products
Highlights from the Fluke
Biomedical digital catalog
2009/2010
riešenia na presné meranie™
Elso Philips Service; tel: +421 32 6582410
email: [email protected]; web: www.elso.sk
Radiation Oncology
Product Catalog
Radiation Safety
Diagnostic Imaging
Product Catalog
Biomedical Test
Product Catalog
2009 2010
Product Catalog
2009 2010
2009/2010
4 1P P e su zed R I n
Ch mber u vey M t r
TNT 12 00 X Ray
Te t D v ce
E A620 E e t cal
a e y Ana y er
19 N Po t b e Neu on
ur ey Me er
3 080M 1 9XR Y Vp D v der
nd Med al S o eMe er
ES 612 l c r cal
a e y Ana y er
ASM 90 Ad an ed
S r ey Me er ASM)
07 CRXW Wi e e s CR RAD HEX
CR QC P od c i i y De i e
mpu e 700 DP De br l t r/
ra s ut ne us P c m ke Ana y er
2009/2010
7600 D ub e C eck P o
D i y Ch ck D v ce
3 040 Ad an ed T er py
D s me er AT )
5 33 PR MAL RT 0
e e he apy R d a i n Mon t r
Fluke B omedical
Be ter produc s More choices One company
37 705 V r D se
PDM C Sy t m
Fluke Biomed cal
Bet er products More choices One company
5 43 PR MAL RT
i i al r a M n t rs
Fluke Biomed cal
Bet er products More choices One company
6 24 156 es ed CT
ose han om K t or
P d a r c Ad lt ead nd Bo y
F uke B omedical
Better produc s Mo e cho ces One company
VT MO I E
G s F ow An ly er
Fluke Biomedical.
Better products. More choices. One company.
Featured Products Catalog
2009/2010
Providing solutions, not just products
Today, biomeds, physicists, RSO’s, other medical personnel must
meet increasing regulatory pressures, higher quality standards,
and rapid technological growth, while performing their work
faster and more efficiently than ever. Fluke Biomedical provides
a diverse range of software and hardware tools to meet today’s
challenges.
Service
Fluke Biomedical is dedicated to providing the best service
within the healthcare industry. Equipped with the bestcredentialed facilities, onsite experts, and full asset-management
capabilities, Fluke Biomedical’s service team is always on call
to take care of its customers. Fluke Biomedical’s world-class
staff leads the industry in post- and pre-sale support, including
helping customers choose the best products and accessories for
their needs, technical support, product calibration, and repairs.
Regulatory compliance
Fluke Biomedical’s benchmark quality operates to the most
rigorous standards in the industry, including compliance with
ISO 9001:2000, ISO 13485:2003, FDA/QSR as applicable,
and NRC/Part 50, Appendix B/Part 21 and adheres to ISO
17025:2005, ANSI Z540, Mammography MQSA and CNSC.
Many of the Fluke Biomedical products are CE-marked and
CSA-certified. In addition, the Global Calibration Laboratory holds
its NVLAP Lab Code 200566-0 certification and is traceable to
both the NIST & PTB.
About Fluke
Biomedical
Fluke
Biomedical leads the
world in the manufacture
of biomedical test and simulation products, including
standalone
electrical safety
testers to fully integrated
and
automated performance
testing and documentation
systems. Fluke Biomedical
also provides some of the
most trusted and accurate
radiation safety, medical
imaging, and oncology
quality-assurance
solutions
for regulatory compliance.
About Fluke
Corporation
Fluke Biomedical is a division
of Fluke Corporation. Fluke
Corporation is the world
leader in the manufacture,
distribution, and service
of electronic test tools and
software and is a wholly
owned subsidiary of
Danaher Corporation
(NYSE:DHR).
Legacy
You may be familiar with some of our legacy brand names,
including:
• Victoreen®
• Metron
• Nuclear Associates
• DNI Nevada
• Keithley
• Bio-Tek Instruments
Fluke Biomedical has taken the best elements and products of
these former brands and has incorporated them into the Fluke
Biomedical culture and product line available today.
Our newest catalogs
Our four comprehensive digital catalogs are available on
CD-ROM and are also available electronically on the Fluke
Biomedical website. For more information about any of
Fluke Biomedical's products and services, visit our website at
www.flukebiomedical.com.
Comprehensive digital catalogs are available for the
following product lines:
• Biomedical Test
• Radiation Safety
Diagnostic
Imaging
QA
•
• Radiation Oncology QA
riešenia na presné meranie™
Elso Philips Service; tel: +421 32 6582410
email: [email protected]; web: www.elso.sk
2
Featured Products Catalog
Featured Products Catalog
Contents
Browse our featured products in this selection:
Biomedical Test
Automation Solutions
Ansur Test Automation Software..............................................................................................4
Defibrillator/Transcutaneous Pacer Analyzers
Impulse 6000D/7000DP Defibrillator/Transcutaneous Pacemaker Analyzer.................6
Electrosurgery Analyzer
QA-ES Series II Electrosurgery Analyzer..............................................................................10
Infusion Device Analyzer
IDA 4 Plus Infusion Device Analyzer.....................................................................................12
Electrical Safety Analyzers
ESA612 Electrical Safety Analyzer.........................................................................................14
ESA620 Electrical Safety Analyzer........................................................................................16
Miscellaneous Simulators
BP Pump 2 Non-Invasive Blood Pressure Simulator...........................................................18
MPS450 Patient Simulator...................................................................................................... 20
PS320 + MFH Fetal Simulator................................................................................................ 22
Index 2 Patient Oximeter Simulator...................................................................................... 24
Gas Flow Analyzers
VT PLUS HF Gas Flow Analyzer..............................................................................................25
Pressure Meters
DPM4 Parameter Tester............................................................................................................27
Diagnostic Imaging
Diagnostic X-Ray Quality Assurance Instruments
TNT 12000 X-Ray Test Device............................................................................................... 29
35080M/199XRAY Non-Invasive kVp Divider and Medical Scopemeter........................32
07-CRXW and 07-QRX Wireless CR RADCHEX and QA RADCHEX................................ 35
Film Processor Quality Assurance
76-424-4156 Nested CT Dose Phantom Kit.........................................................................37
Mammography Quality Assurance
18-220 Mammographic Accreditation Phantom................................................................. 38
Fluke Biomedical
6045 Cochran Road
Cleveland, OH 44139-3303 U.S.A.
Fluke Biomedical Europe
Science Park Eindhoven 5110
5692EC Son, The Netherlands
For more information, contact us
In the U.S.A. (800) 850-4608 or
Fax (440) 349-2307
In Europe/M-East/Africa
+31 40 267 5435 or
Fax +31 40 267 5436
From other countries
+1 (440) 248-9300 or
Fax +1 (440) 349-2307
Email:
[email protected]
Web access:
www.flukebiomedical.com
Service Center/Repair/
Calibration US
Fluke Biomedical
6045 Cochran Road
Cleveland OH 44139-3303
Tel: 440-498-2560
Toll free: 800-850-4608 ext 2564
Email:
[email protected]
Service Center/Repair/
Calibration Europe
Fluke Biomedical Europe
Science Park Eindhoven 5110
5692EC Son, The Netherlands
Tel: +31 (40) 267 5435
Fax: +31 (40) 267 5436
Email: [email protected]
Radiation Safety
Miscellaneous Survey Meters
451B Ion Chamber Survey Meter with Beta Slide.............................................................. 39
451P Pressurized µR Ion Chamber Survey Meter...............................................................41
ASM-990 Series Advanced Survey Meter............................................................................ 43
Area Monitors
05-437 PRIMALERT® 35 Area Radiation Monitor.............................................................. 46
Radiation Oncology
Linear Acclerator Quality Assurance Instruments
7600 Double Check® Pro Daily Check Device.....................................................................47
7020/7040 THEBES® II Therapy Beam Evaluation System............................................. 48
35040 Advanced Therapy Dosimeter................................................................................... 50
Service and Calibration
Service Info.................................................................................................................................51
Calibration Info..........................................................................................................................51
For a complete listing of Fluke Biomedical products and services, please
view our four digital catalogs on the attached CD-ROM. See pages 53-55
for a complete listing of each catalog's table of contents.
Featured Products Catalog
3
Ansur
Test Automation Software
Key features
• General framework software
for performing all types of
tests and inspections
• Remote control of Fluke
Biomedical testers, and
acquisition of test results
via RS-232
• Manual/visual tests,
performance tests, and
electrical-safety tests all
executed in one procedure
• Test-procedure and
test-result files stored in
industry-standard XML format
• Interface capability with
some equipment management
systems and computerized
maintenance management
systems
• Ready-to-use or customized
test templates make creating
standard work easy
• Compatible with a variety
of test instruments by
Fluke Biomedical for easy
standardization
How well do your PM Inspection and postrepair performance-testing processes eliminate
sources of human error?
Wish that all technicians woulddocument
results the same way?
Do you have enough time to complete all PM
Inspection and repair work on your shelf?
Ansur offers a solution:
Repeatability—Creates standard work since
everyone tests the same way every time
Quality—Can automatically configure and collect data from the compatible test devices to
minimize human error and save time
Productivity—Ensure that the amountof time
required to perform testing is uniform and
therefore predictable
Ansur test automation system collects all the
observe-and-record manual entries as well as
automated measurements from compatible simulators and performance analyzers from Fluke
Biomedical.
Automate with Ansur
Look for this logo in the Fluke
Biomedical product catalog to see
where test automation can benefit you.
Specifications
PC requirements
64 MB RAM
50 MB unused hard drive space for software
IBM PC/XT compatible Pentium 266 MHz or faster processor
Hard drive space for result and template files
32-bit Microsoft Windows® operating system (2000/XP/Vista)
RS-232 ports or USB-RS-232 adapter
Other requirements
License key for each Fluke Biomedical or Metron simulator/analyzer
plug-in (accesses full functionality of Ansur and its plug-ins)
One or more Ansur-compatible Fluke Biomedical or Metron simulators/
analyzers (ensures best results for minimizing human error and
opportunity for best productivity)
4
Biomedical Test Products
Ansur
Test Automation Software
“We used Ansur to create test sequences that match service manual
procedures so every inspection is done the same way every time.
We improved quality and uniformity by creating standard work.”
-Robert Dorrian, TBS U.K. Telematic & Biomedical Services Ltd. Hope Hospital
Ordering information
2462982 Ansur Test Executive
Plug-ins available:
Purchase the modules you need,
and then add modules as you
acquire new Fluke Biomedical
analyzers and simulators.
2755836 BP Pump 2
2556755 ESA601
3454829 ESA612
3116463 ESA620
2817641 Impulse 4000
3091370 Impulse 6000D/7000DP
2461775 QA-40M/45
2463016 QA-90
2462644 QA-1290
2461802 QA-ES
2461979 QA-IDS/lagu
2463002 QA-ST
2462024 QA-VTM
2817226 QED 6
3337356 TNT 12000
Test Automation Bundles
available: Purchase modules
along with the Fluke Biomedical
instrument of choice
3334821 BP Pump 2L NIBP, US
120V w/Test Automation
3334839 BP Pump 2l NIBP, AUS
250V w/Test Automation
3334842 BP Pump 2L NIBP, DEN
250V w/Test Automation
3334856 BP Pump 2L NIBP, SHK
250V w/Test Automation
3334863 BP Pump 2L NIBP, ISR
250V w/Test Automation
3334874 BP Pump 2L NIBP, ITAL
250V w/Test Automation
3334888 BP Pump 2L NIBP, IND
250V w/Test Automation
3334895 BP Pump 2L NIBP, SWZ
250V w/Test Automation
3334901 BP Pump 2L NIBP, UK
250V w/Test Automation
3334912 BP Pump 2M NIBP, US
120V w/Test Automation
Biomedical Test Products
3334920 BP Pump 2M NIBP, AUS
250V w/Test Automation
3334935 BP Pump 2M NIBP, DEN
250V w/Test Automation
3334947 BP Pump 2M NIBP, SHK
250V w/Test Automation
3334958 BP Pump 2M NIBP, ISR
250V w/Test Automation
3334964 BP Pump 2M NIBP, ITAL
250V w/Test Automation
3334973 BP Pump 2M NIBP, IND
250V w/Test Automation
3334986 BP Pump 2M NIBP,
SWZ 250V w/Test Automation
3334999 BP Pump 2M NIBP, UK
250V w/Test Automation
3334732 ESA601, 230V AUS w/
Test Automation
3334744 ESA601, DEU 230V
SHK w/Test Automation
3334759 ESA601, FRA 230V
SHK w/Test Automation
3334767 ESA601, ITA 230V SHK
w/Test Automation
3334771 ESA601, ISR 230V w/
Test Automation
3334780 ESA601, 230V SHK w/
Test Automation
3334798 ESA601, 230V UK w/
Test Automation
3334800 ESA601, 115V IEC w/
Test Automation
3334817 ESA601, 115 AAMI w/
Test Automation
3460932 ESA612, US 115 V w/
Test Automation
3460959 ESA612, EUR 230 V w/
Test Automation
3460944 ESA612, FR 230 V w/
Test Automation
3460967 ESA612, ISR 230 V w/
Test Automation
3460971 ESA612, AUS 230V w/
Test Automation
3460980 ESA612, UK 230 V w/
Test Automation
3460998 ESA612, SWI 230V w/
Test Automation
3461001 ESA612, THAI 230V w/
Test Automation
3462285 ESA612, JPN 230V w/
Test Automation
3326935 ESA620, US 115V 20A
w/Test Automation
3326947 ESA620, EUR 230V w/
Test Automation
3326958 ESA620, FR 230V w/
Test Automation
3326964 ESA620, ISR 230V w/
Test Automation
3326986 ESA620, AUS 230V w/
Test Automation
3326999 ESA620, SWI 230V w/
Test Automation
3327002 ESA620, UK 230V w/
Test Automation
3326874 Impulse 7KDP, US 120V
w/Test Automation
3326888 Impulse 7KDP, SHK w/
Test Automation
3326895 Impulse 7KDP, UK w/
Test Automation
3326901 Impulse 7KDP, JPN w/
Test Automation
3326912 Impulse 7KDP, AUS w/
Test Automation
3326920 Impulse 7KDP, IN w/
Test Automation
3319736 QA-ES, US 115V w/
Test Automation
3319749 QA-ES, SHK 230V w/
Test Automation
3319751 QA-ES, UK 230V w/
Test Automation
3319760 QA-ES, AUS 230V w/
Test Automation
3319772 QA-ES, JPN 100V w/
Test Automation
3327016 Kit, TA-LAGU, 1
Channel Lagu, with Test
Automation
3327025 Kit, TA-LAGU,
2 Channel Lagu with Test
Automation
3335538 TNT 12000, w/Test
Automation
3340639 TNT 12000WD, w/Test
Automation
5
Impulse 6000D/7000DP
Defibrillator/Transcutaneous
Pacemaker Analyzer
N10140
The Impulse 6000D
Defibrillator Analyzer and
Impulse 7000DP Defibrillator/
Transcutaneous Pacemaker
Analyzer Test Systems are
rugged, portable precision test
instruments that ensure proper
operation and ultimate performance of critical life-support
cardiac-resuscitation equipment. The Impulse 6000D and
Impulse 7000DP test capabilities encompass the spectrum
of worldwide-established pulse shapes, showcase breakthrough
AED technology compatibility, and outperform in accuracy and
standards. Additionally, the Impulse 7000DP incorporates the tests
and the extensive range of test loads and measurement algorithms
needed to test external transcutaneous pacemakers.
In conjuntion with an Impulse 7000DP, the Impulse 7010
Defibrillator Selectable Load Accessory provides multiple loads of
25 Ω, 50 Ω, 75 Ω, 100 Ω, 125 Ω, 150 Ω, 175 Ω, and 200 Ω for
defibrillator performance testing. A standard USB interface enables
computer control and data transfer, and optional Ansur PC-based
automation software increases productivity by outfitting users with
an easy-to-use method to standardize testing procedures and capture, print and document data.
Product comparison chart
Model
QED 6
Impulse 6000D
Impulse 7000DP
Monophasic and dc
biphasic energy capability
Yes
Yes
Yes
Pulsed biphasic engery
capability
No
Yes
Yes
Output energy
Output energy
Output energy
Cardioversion
Cardioversion
Cardioversion
Peak measurements
Max energy/charge-time
overshoot
Max energy/charge-time
overshoot
—
Peak and average current
Peak and average current
—
Voltage measurement
Voltage measurement
Normal ECG/performance
waves
No
Yes
Yes
Transcutaneous pacer tests
No
No
Yes
Defibrillator tests
6
Biomedical Test Products
Key features
• Impulse 7010 Defibrillator
Selectable Load Accessory
provides multiple loads of
25 Ω, 50 Ω, 75 Ω, 100 Ω,
125 Ω, 150 Ω, 175 Ω, and
200 Ω to comply with
IEC 60601-2-4 standard
(optional)
• Lown, Edmark, trapezoidal,
biphasic and pulsed
biphasic defibrillation
technology compatibility
• AED technology compatibility
• First-class measurement
accuracy: ± 1 % of reading
0.1 J
• Intuitive user interface and
backlight, easy-to-ready
display
• Portable, rugged, easy to carry
• Long-lasting, rechargeable
battery
• Internal pacer brand
selections
• Pacer input protected against
defibrillator output (7000DP
only)
• 10 isolated ECG electrodes
that provide 12 combinations for standardized clinical
signals
• Flexible heart-rate settings
(1 BPM step) facilitate rate
meter accuracy and alarm
testing
• DSP-based measurements
enable future firmware and
waveforms upgrade
• Unique integrated posts for
secure connections
• Optional Ansur test automation software to standardize
testing procedures, capture
waveforms, and print and
document test result
Impulse 6000D/7000DP
Defibrillator/Transcutaneous
Pacemaker Analyzer
Specifications
Defibrillator Analyzer
Energy output measurement Compatible defibrillator waveshapes: Lown, Edmark, trapezoidal, dc
bi-phasic, and ac pulsed bi-phasic
Autoranged measurement
0.1 J to 600 J
Accuracy
0.1 J to 360 J: ± 1 % of reading +0.1 J
360 J to 600 J: ± 1 % of reading +0.1 J, typical
Note: For pulsed bi-phasic defibrillator, specified accuracy is
± (1.5 % of reading + 0.3 J) on both ranges
Load resistance
Resistence: 50 Ω
Accuracy
1 %, non-inductive (< 2 μH)
Charge time measurement
Range: 0.1 s to 100 s
Accuracy: ± 0.05 s, typical
Synchronization test
(cardioversion)
Delay time measurement
• Timing window: ECG R-wave peak to the defib pulse peak
• Range: -120 ms to 380 ms; measures timing from 120 ms prior
to the R-wave peak to up to 380 ms following the R-wave peak
Automated defibrillator test ECG waves
• Normal sinus: 10 BPM to 300 BPM in 1 BPM steps
• Ventricular fibrilation: Coarse and fine
• Monomorphic ventricular tachycardia: 120 BPM to 300 BPM
in 1 BPM steps
• Polymorphic ventricular tachycardia: 5 types
• Asystole
ECG waves
ECG general
Lead configuration: 12-lead simulation; RA, LL, LA, RL, V1-6 with
independent outputs
Lead to lead impedance
1000 Ω
Rate accuracy
± 1 % nominal
ECG amplitudes
Reference lead: Lead II (default) or Lead I
Settings: 0.05 mV to 0.45 mV by 0.05 mV and 0.5 mV to 5 mV
by 0.05 mV
Accuracy: ± 2 % of setting (Lead II), ± 5 % for all other leads and
defib paddles
ECG normal sinus
Rates: 10 BPM to 360 BPM in 1 BPM steps
ECG on defibrillator
input load
Same as the Lead II amplitude but limited to ± 4 mV
ECG performance waves
Square wave: 2 Hz and 0.125 Hz
Triangular wave: 2 Hz and 2.5 Hz
Sine waves: 0.05 Hz, 0.5 Hz, 5 Hz, 10 Hz, 40 Hz, 50 Hz, 60 Hz,
100 Hz, 150 Hz, and 200 Hz
Pulse: 30 BPM and 60 BPM, 60 ms pulse width
R-wave detection
Waveform: Haver-triangle
Rate: 30 BPM, 60 BPM, 80 BPM, 120 BPM, 200 BPM, and 250 BPM
Widths: 8 ms, 10 ms, 12 ms, and 20 ms to 200 ms in 10 ms steps
Accuracy: ± 1 % setting 0.2 mV
Noise immunity
Wave sine
Line frequency: 50 Hz or 60 Hz (± 0.5 Hz)
Amplitude: 0 mV to 10 mV (by 0.5 mV ± 5 %)
Arrhythmia selections
Biomedical Test Products
Pacer interactive (Impulse 7000DP only)
Supraventricular
Premature
Ventricular
Conduction
Transveneous paced with selectable pacer spike amplitudes
and widths
7
Impulse 6000D/7000DP
Defibrillator/Transcutaneous
Pacemaker Analyzer
Optional accessories
Specifications
Transcutaneous Pacemaker Analyzer (Impulse 7000DP only)
Defibrillator input
Fixed load: 50 Ω
Accuracy: ± 1 %, non-inductive (< 2 μH)
Pacemaker input
Variable load: 50 Ω to 1500 Ω by 50 Ω
Accuracy: ± 1 %, non-inductive (< 2 μH)
Manufacturer specific
algorithms
•
•
•
•
•
•
•
Current
Range: 4 mA to 250 mA
Accuracy: ± 1 % of reading +0.02 mA
Pulse rate
Range: 5 PPM to 800 PPM
Accuracy: ± 0.5 % of reading +0.1 PPM
Pulse width
Range: 1 ms to 100 ms
Accuracy: ± 0.5 % of reading +0.01 ms
Demand and asynchronous
mode test
Underdrive rate: 10 BPM minimum
Overdrive rate: 300 BPM maximum
Sensitivity test
Automatic interactive threshold detection
Medtronic/Physio Control LIFEPAK
Philips/Agilent/HP
ZOLL Medical
GE Responder (1500 and 1700)
MRL/Welch Allyn
Schiller Medical
MDE300 (Medical Data Electronics), plus a general purpose
default algorithm selection
Compatible pacer rates: 30 PPM to 120 PPM
ECG R wave
Waveforms: Square, triangle, sine
Widths: 1 ms to 19 ms (by 1 ms), 20 ms to 95 ms (by 5 ms),
100 ms to 300 ms (by 25 ms)
Accuracy: ± 5 % of setting
Amplitude: 0.05 mV to 0.95 mV (by 0.05 mV), 1 mV to 5 mV
(by 0.5 mV)
Accuracy: ± 5 % of setting
Refractory period tests
Paced refractory period 20 ms to 500 ms
Sensed refractory period 15 ms to 500 ms
Accuracy: ± 1 ms
General information
Dimensions (LxWxH)
32 cm x 24 cm x 13 cm (13 in x 9.5 in x 5 in)
Weight
3.02 kg (6.6 lb)
Standards
Safety standards
8
Biomedical Test Products
CE: IEC/EN61010-1 2nd Edition; Pollution degree 2; CSA:
CAN/CSA-C22.2 NO,61010-1, UL61010-1; C-Tick: Australian EMC
3091370 Ansur Impulse
6000D/7000DP Plug-In
3065489 MedtronicERS/PhysioControl (FAST PATCH) (set of
two): 4 mm defibrillator adapters
3065450 Kimberly Clark/R2
Darox MRL/MDE/NK: 4 mm
defibrillator adapters
3065438 Internal discharge
paddle contacts (set of two)
3065477 Medtronic ERS/PhysioControl (QUIK PACE) (set of two):
4 mm pacer adapters
3065527 Zoll Medical NTP/
PD1400: 4 mm pacer adapters
3065461 Medtronic ERS/PhysioControl (QUIK COMBO): 4 mm
defib/pacer adapters
3065492 Philips/Agilent/HP
(CODEMASTER Series-Round):
4 mm defib/pacer adapters
3065509 Philips/Agilent
HEARTSTART FR2/MRX: 4 mm
defib/pacer adapters
3065511 Zoll PD-2200
Multi-Function PD-Series,
M-Series, M-Series CCT, AED
PRO® and AED Plus™ defib/pacer
adapters
3065423 GE Marquette
(RESPONDER 1500/1700 Series)
(set of two): 4 mm defib/pacer
adapters
3158544 Impulse 7010
Defibrillator Selectable Load
Accessory
Impulse 6000D/7000DP
Defibrillator/Transcutaneous
Pacemaker Analyzer
Included accessories
Specifications
Impulse 7010 Defibrillator Selectable Load Accessory
Maximum voltage
5000 V
Maximum continuous power 12 W, equivalent to 10 defib pulses of 360 J every 5 minutes
Inductance
<
<
<
<
<
<
<
2
3
4
5
6
7
8
µH,
µH,
µH,
µH,
µH,
µH,
µH,
@25 Ω
@50 Ω
@75 Ω and 100 Ω
@125 Ω
@150 Ω
@175 Ω
@200 Ω
3028681 Users Manual CD
3028662Getting Started Guide
XXXXXXX Battery Eliminator
(country specific)
2814980Carrying Case
2795773 Defibrillator Paddle
Contact Plates
1626219 USB Computer
Communication Cable
Ordering information
Temperature
Operating: 10 °C to 40 °C (50 °F to 104 °F)
Storage: -20 °C to 60 °C (-4 °F to 140 °F)
Humidity
10 % to 90 % non-condensing
Dimensions (WxDxH)
154 mm x 272 mm x 138.7 mm (6.07 in x 10.71 in x 5.46 in)
Weight (net)
1.54 kg (3 lb 6.2 oz)
Safety class
Complies with EN61010-1 2nd Edition, Class II product
Safety standards
CE: IEC/EN61010-1 2nd Edition; Pollution degree 2;
CSA: CAN/CSA-C22.2 NO,61010-1, UL61010-1; C-Tick: Australian EMC
Warranty
Two-year extended warranty (no-cost extended warranty available
after first-year calibration at any Fluke Biomedical authorized service
center)
Calibration interval
One-year
Electrical specifications (for load accessory and analyzer together)
Load settings
25 Ω, 50 Ω, 75 Ω, 100 Ω, 125 Ω, 150 Ω, 175 Ω, and 200 Ω ± 1 %
Accuracy
Energy (all except pulsed biphasic): 2 % of reading + 0.1 J
with 25 Ω, 75 Ω though 200 Ω loads, 1 % of reading + 0.1 J with
50 Ω load
Energy (pulsed biphasic): 2.5 % of reading + 0.3 J with 25 Ω, 75 Ω
though 200 Ω loads, 1.5 % of reading + 0.3 J with 50 Ω load
Voltage: 1 % of reading + 2 V with 25 Ω and 50 Ω loads, 2 % of
reading + 2 V with 75 Ω through 200 Ω loads
Current: 2 % of reading + 0.1 A with 25 Ω load, 1 % of reading
+ 0.1 A with 50 Ω through 200 Ω loads
Impulse 6000D
Defibrillator Analyzer
2811928 United States, 120 V
3077031 Schuko
3077046 United Kingdom
3077054 Japan
3085270 Australia
3085281 India
Impulse 7000DP
Defibrillator/Transcutaneous
Pacemaker Analyzer
2811919 United States, 120 V
3077005 Schuko
3077010 United Kingdom
3077022 Japan
3085296 Australia
3085308 India
Impulse 7000DP Defibrillator/
Transcutaneous Pacemaker
Analyzer with test automation
3326874 United States, 120 V
3326888 Schuko
3326895 United Kingdom
3326901 Japan
3326912 Australia
3326920 India
N10140
Discharge curve at 25 Ohms using Ansur and the 7010 load box.
Biomedical Test Products
Discharge curve at 175 Ohms using Ansur and the 7010 load box.
Note the differences in the shape, the peak currents and the time of the
discharges.
9
QA-ES Series II
Electrosurgery Analyzer
Key features
• Automatic power
distribution measurement,
including power, current,
peak-to-peak voltage (closed
load only), and crest factor
• Oscilloscope output
• High-frequency leakage
measurements with accuracy
of ± 2 % of reading
• 128 internal user-selectable
test loads from 10 Ω to 5200 Ω
• Foot-switch output for
triggering the ESU under test
• Ansur QA-ES software plug-in
for automated test protocols
• Large display
• RS-232 and Centronic-Printer
interface
QA-ES Series II analyzes electrosurgical units quickly and
accurately.
A wide load-resistance range provides 128 user-selectable
loads, including very low loads for testing many of today’s ESUs.
An accuracy of ± 2 % of reading down to 20 mA guarantees
reliable high-frequency leakage results. With capability to run
an automatic-power-distribution test in as little as 1 minute, the
QA-ES works fast so technicians save time.
An Ansur QA-ES software plug-in allows users to create and
automatically run tests, capture data, and produce easy-to-read
reports with a PC.
Specifications
Modes of operation
10
Continuous operation
Continuous measurement of power, current, peak-to-peak voltage
(closed load only), and crest factor
Single operation
Single measurement after the set delay time of the ESU output of power,
current, peak-to-peak voltage (closed load only), and crest factor
Power distribution
Automatic measurement of power, current, peak-to-peak voltage (closed
load only), and crest factor through a user-selectable load range
RF leakage current
Provides connections and load configurations to measure HF leakage
from both grounded and isolated equipment
RECQM
Test the “return electrode control quality monitoring
using the QA-ES internal loads
Manual/remote
via Ansur test automation software
Biomedical Test Products
QA-ES Series II
Electrosurgery Analyzer
Specifications
Optional accessories
Generator output
Load resistance
(128 loads)
10 Ω to 2500 Ω in step of 25 Ω
2500 Ω to 5200 Ω in step of 100 Ω
Measurement
True-rms value of applied waveform
RMS bandwidth
30 Hz to 10 MHz (-3 dB) for instrumentation only
30 Hz to 2.5 MHz (-3 dB) with loads
Low frequency filter
100 Hz filter to avoid low-frequency disturbance or interference
Current
20 mA to 2200 mA
Current accuracy
± 2 % of reading
Additional fixed load
200 Ω 400 W for 30 s; max 15 % duty cycle
Crest factor
The higher of the two peak voltage measurements is used for computation
Range: 1.4 to 16 (V peak/V rms).
Foot-switch output
The foot switch output can be used to trigger the electrosurgical unit.
Peak-to-peak voltage
0 kV to 10 kV (closed load only) accuracy: ± 10 %
Note: Measurement is taken between the active and dispersive electrodes
with closed load only.
Oscilloscope output
5 V/A uncalibrated, 100 mA RF current minimum input
Ansur QA-ES plug-In
remote control
All functions and tests in QA-ES may be performed from the PC
User-programmable test sequences
Allows unlimited numbers of test sequences with user-programmable
templates and test limits. These tests include power distribution test,
output test, HF leakage, and RECQM verification.
Storage and recall
Protocol formats and data may be stored, recalled, printed out,
or transferred.
General information
Display
LCD graphic display
Alphanumeric format
8 lines x 40 characters
Graphic mode
240 x 64 pixel matrix
Display control
Five f-keys, enter, cancel, control knob, and an encoder
Data input/outputs
Parallel printer port and bidirectional RS-232
Power
115/230 V ac; 48 Hz to 66 Hz, 35 VA
Housing
Metal case
Dimensions (LxWxH)
39.5 cm x 34.2 cm x 13.2 cm (15.6 in x 13.5 in x 5.2 in)
Weight
9.8 kg (21.6 lb)
2461794 Carrying Case
2461802 Ansur Test Software,
QA-ES plug-in license
2461993 Data Transfer Cable,
RS-232
2716059 QA-ES II Calibration
Manual
2523266 Clamp, crocodile style,
grip C, black
2523275 Clamp, crocodile style,
grip C, red
Included accessories
2716044 QA-ES Series II Users
Manual (electronic, CD)
2716032 QA-ES Series II Users
Manual (printed)
2772171 ESU-Dispersive
Safety Lead
2772180 ESU-CQM Safety Lead
2772209 ESU-Jumper Safety
Lead
2826194 Test Lead with
stackable plugs
1903307 Test Lead Set with
retractable sheaths
1610159 Sure-Grip Large
Alligator Clip Set
XXXXXXX Power Cord (country
specific)
Ordering information
QA-ES Series II
Electrosurgery Analyzer
2649769 United States, 115 V
2651725 Schuko, 230 V
2770445 United Kingdom, 230 V
2770450 Australia, 230 V
3096390 Japan, 100 V
3319736 QA-ES, US 115V w/Test
Automation
3319749 QA-ES, SHK 230V w/
Test Automation
3319751 QA-ES, UK 230V w/
Test Automation
3319760 QA-ES, AUS 230V w/
Test Automation
3319772 QA-ES, JPN 100V w/
Test Automation
Example of a power
distribution curve created
in 30 seconds with the
Ansur QA-ES plug-in.
Biomedical Test Products
11
IDA 4 Plus
Multi-Channel
Infusion Device Analyzer
Key features
• Tests up to four infusion
pumps simultaneously
N10140
IDA 4 Plus Multi-Channel Infusion
Device Analyzer maximizes productivity with multiple, independent
channels for testing upto four infusion
pumps at once.
The device measures instantaneous
flow, average flow, occlusion pressure,
and analyzes patient-control analgesia
(PCA) units. An optional PCA trigger
box provides automated PCA pump
control, allowing technicians to set
up tests and walk away.
An autostart feature simplifies
syringe pump testing or other tests
that have long startup times.
With built-in memory, the IDA 4 Plus
records test results internally and
provides easy-to-read test-result
graphs right on the analyzer’s screen.
The display is so large numbers can
be read from across the room
Additionally, the IDA 4 Plus comes with Hydrograph PC software for creating full-color graphs and reports. For automated
testing, the IDA 4 Plus is compatible with Fluke Biomedical’s
medTester 5000C (US only).
• Compatible with virtually any
type of infusion device
• Instantaneous and average
flow measurement
Occlusion
pressure
•
measurements to 45 psi
• Single- and dual-flow
(piggyback) testing
• Full PCA testing (bolus volume,
lockout time, and automated
external triggering)
• Autostart mode enables unit
to begin testing only when
fluid is detected
On-board
graphing of
•
pressure and flow
• Built-in memory to save test
results for printing or
downloading to computer
• Hydrograph graphical
software to control unit
and display results via PC
• Automated testing through
Fluke Biomedical medTester
5000C (US only)
• RS-232 ports
• Optional keyboard, printer,
and alarm/PCA
Specifications
Flow-rate measurement
Technique
Calculated by measuring a volume over time
Range
0.5 ml/hr to 1000 ml/hr
Accuracy
1 % of reading ± 1 LSD for flows of 16 ml/hr to 200 ml/hr for
volumes over 20 ml; otherwise, 2 % of reading ± 1 LSD after
delivery of 10 ml
Volume measurement
Technique
Volume measured directly by the transducer in minimum sample
sizes of 60 µl
Range
0.06 ml to 9999 ml
Accuracy
1 % of reading ± 1 LSD for flows of 16 ml/hr to 200 ml/hr for
volumes over 20 ml; otherwise, 2 % of reading ± 1 LSD after
delivery of 10 ml
PCA bolus measurement
Technique
Volume is measured directly by the transducer in minimum bolus
volumes of 0.5 ml. The measurement is made with a continuous rate
between 0 ml/hr and 30 ml/hr. The bolus flow rate should be at
least four times the basal flow rate for reliable detection of boluses
Minimum bolus volume
0.5 ml
Accuracy
See volume measurement
Pressure measurement
12
Technique
Direct occlusion of the infusion line and measurement of pressure
prior to the glass transducer
Range
0 psi to 45 psi and equivalents in mmHg and kPa
Accuracy
1 % of full scale ± 1 LSD
Back pressure
-100 mmHg to 300 mmHg
Biomedical Test Products
Optional PCA Trigger Box
IDA 4 Plus
Multi-Channel
Infusion Device Analyzer
Ordering information
Specifications
Electrical specifications
Supply voltage
Autoswitching 90 V ac to 260 V ac
Supply frequency
50 Hz to 60 Hz
Supply power
< 30 VA
Fuse
20 mm 250 V, 1 A (T) (slow blow)
Earth leakage current
< 1 mA in single fault condition
Environmental conditions
Operating temperature
15 °C to 30 °C (59 °F to 86 °F)
Storage temperature
0 °C to 40 °C (32 °F to 104 °F) at 85 % RH or less for storage
(Do not leave for more than 48 hours at -20 °C/-4 °F)
General information
Dimensions (LxWxH)
19.05 cm x 18.11 cm x 30.18 cm (7.5 in x 7.2 in x 11.9 in)
Weight
5 kg (11 lb)
Optional accessories
HydroGraph™
Graphics Software
Use the moving color
visual advantage
of HydroGraph to
troubleshoot up to four
infusion pumps at once.
Data is taken directly
off the transducer and
transmitted to HygroGraph.
The flowing graphs
provide an electronic
means to display, store,
and recall flow patterns
for comparison at a later
date. Each test window
can display instantaneous
and average flow rates,
cumulative, and bolus
volumes; and occlusion
pressure.
Biomedical Test Products
2245061 External mini-keyboard, 83-key
with PS/2 connector and AT adapter
2238072 Parallel Printer Cable (D25M-36M)
2209703 PCA Trigger/Nurse Call Box
2248899 Printer, Seiko DPU-414-30B
(120 V power supply) (additional
purchase required: parallel printer
cable, p/n 2238072)
2399531 Printer, Seiko DPU-414-30B
(220 V power supply) (additional purchase required: parallel printer cable,
p/n 2238072)
2235375 Printer (120 V power supply)
2235382 Printer (220 V power supply)
2200102 Interface Cable, medTester to
IDA 4 Plus (without wedge adapter) (RS232; female DB25 to female DB9)
2201042 Interface Cable, medTester to IDA
4 Plus (with or without wedge adapter)
(RS-232; female DB9 to female DB25)
2245092 Barcode Scanner (with
long-reach coil cable with Y connector
for keyboard attachment)
2238626 Null Modem Cable (female DB9
to female DB9)
Included accessories
2213506 Electronic Users Manual
and HydroGraph software
2217231 20 ml Priming Syringe
2391750 Luerlock-3 way (one for each
channel)
2238909 5-foot Plastic Drain Line
2238626 Null Modem Cable (female DB9
to female DB9)
XXXXXXX Detachable Power Cord
(country specific)
IDA 4 Plus One-Channel
Infusion Device Analyzer
2250063 United States, 120 V
2394575 Australia, 250 V
2394582 Denmark, 250 V
2394594 Shuko, 250 V
2394608 Israel, 250 V
2394613 Italy, 250 V
2394624 India, 250 V
2394636 Switzerland, 250 V
2394649 United Kingdom, 250 V
IDA 4 Plus Two-Channel Infusion
Device Analyzer
Full testing for up to two infusion
pumps simultaneously
2250088 United States, 120 V
2394651 Australia, 250 V
2394660 Denmark, 250 V
2394672 Shuko, 250 V
2394685 Israel, 250 V
2394697 Italy, 250 V
2394703 India, 250 V
2394715 Switzerland, 250 V
2394726 United Kingdom, 250 V
IDA 4 Plus Three-Channel Infusion
Device Analyzer
Full testing capability for up to three
infusion pumps simultaneously
2250109 United States, 120 V
2394732 Australia, 250 V
2394744 Denmark, 250 V
2394759 Shuko, 250 V
2394767 Israel, 250 V
2394771 Italy, 250 V
2394780 India, 250 V
2394798 Switzerland, 250 V
2394800 United Kingdom, 250 V
IDA 4 Plus Four-Channel Infusion
Device Analyzer
Full testing capability for up to four
infusion pumps simultaneously
2250127 United States, 120 V
2394817 Australia, 250 V
2394821 Denmark, 250 V
2394839 Shuko, 250 V
2394842 Israel, 250 V
2394856 Italy, 250 V
2394863 India, 250 V
2394874 Switzerland, 250 V
2394888 United Kingdom, 250 V
13
ESA612
Electrical Safety Analyzer
Key features
• Portable, ergonomic, lightweight and easy to use
The ESA612 Electrical Safety Analyzer represents the next generation in testers for
biomedical professionals that perform field
service on medical equipment throughout their
facilities, in clinics, and anywhere onsite service
is required. Portable, lightweight, and designed
for operation in tight spaces, the ESA612 offers
the functionality of a simulator, multimeter and
electrical-safety analyzer in a single test tool.
With selection of two test loads, this versatile product can be used worldwide to test
to preventative maintenance electrical safety
standards of choice: ANSI/AAMI ES1:1993
(NFPA-99), IEC62353 (VDE 751), and AN/NZS
3551.
The versatility of the multifaceted ESA612
is further expanded with optional automation
software, which speeds and simplifies testing
and provides high-end-analyzer productivity
at software-level investment. Ansur-automated
ESA612 standardizes test procedures, compares
results to standards limits, and generates and
stores reports for total digital data management.
Specifications
Voltage
Range (mains voltage)
90 V ac to 132 V ac rms, 180 V ac to 264 V ac rms
Range (accessible voltage)
0 V ac to 300 V ac rms
Accuracy
± (2 % of reading + 0.2 V)
Voltage tests
Mains and point-to-point
Earth resistance
Mode
Two terminal
Test current
> 200 mA ac
Range
0 W to 2 W
Accuracy
± (2 % of reading + 0.015 W)
Resistance tests
Earth resistance and point-to-point
• Large, easy-to-read display
with adjustable contrast
• Human-factors-designed user
interface
Tilt
• stand design for stand-up
testing in field environments
• Five applied parts jacks and
easy ECG snap connection
with optional expander box
ECG
waveform tests and dual•
lead measurements combine
the functionality of a simulator, multimeter and electricalsafety analyzer in a single
test tool
• Replaceable mains fuses keep
the device in the field and out
of the repair shop
• Internal memory for 100 test
records
• 20 A at 120 V current
capability
USB
connection for use with
•
Ansur and Data Viewer software (for memory download
to PC)
Two-year
extended warranty
•
(no-cost, available after firstyear calibration at the Fluke
Biomedical Cleveland Service
Center)
• Optional Ansur automation
software standardizes test
procedures, compares results
to standards limits, generates/
stores reports and provides
total digital data management
• Rigorously tested for rugged
field applications, with CE
and CSA in addition to the
Fluke-quality-design stamp of
approval
Equipment current
Mode
AC rms
Range
0 A to 20 A
Accuracy
± 5 % of reading + (2 counts or 0.2 A, whichever is greater)
Duty cycle
15 A to 20 A, 5 min on/5 min off, 10 A to 15 A, 7 min on/3 min off,
0 A to 10 A continuous
Leakage current
Modes*
AC + DC (true-rms)
Optional accessories
AC only
1903307 Retractable Test Leads
2242165 Ground Pin Adapter (US
receptacle testing ground lug)
3392119 1210 Adapter Box
Assembly
3454829 Ansur ESA612 Plug-In
License Key
DC only
*Modes are available in all leakage tests with the exception of MAP leakages that are available only in true-rms.
14
Patient load selection
(input impedance)
AAMI ES1-1993 Fig. 1, IEC 60601: Fig 15
Crest factor
≤3
Biomedical Test Products
ESA612
Electrical Safety Analyzer
Included accessories
Specifications
Ranges
0 μA to 199.9 μA, 200 μA to 1999 μA, 2 mA to 10 mA
Frequency response/
accuracy
DC to 1 kHz
± (1 % of reading + (1 μA or 1 LSD,
whichever is greater))
1 kHz to 100 kHz
± (2 % of reading + (1 μA or 1 LSD,
whichever is greater))
1 kHz to 5 kHz
(current > 1.6 mA)
± (4 % of reading + (1 µA or 1 LSD,
whichever is greater))
100 kHz to 1 MHz
± (5 % of reading + (1 μA or 1 LSD,
whichever is greater))
Note: Accuracy for Isolation, MAP, Direct AP, Alternative AP, and Alternative Equipment leakage tests all ranges are
+ (2.5 µA or 1 LSD, whichever is greater)
Leakage tests
Ground wire (earth), Chassis (enclosure), Lead to ground (patient),
Lead to lead (patient auxiliary), Lead isolation (mains on applied
part), Direct equipment , Direct applied part, Alternative equipment,
Alternative applied part, Point to point
Mains on applied part
test voltage
100 % of mains
Differential leakage
Ranges
10 µA to 199 µA, 200 µA to 2000 µA, 2 mA to 20 mA
Accuracy
± 10 % of reading + (2 counts or 20 µA, whichever is greater)
Insulation resistance
Ranges
0.5 MW to 20 MW, 20 MW to 100 MW
Accuracy
± (2 % of reading + 0.2 MW), ± (7.5 % of reading + 0.2 MW)
Source test voltage
500 V dc , 250 V dc
Insulation resistance tests
Mains-PE, AP-PE, Mains- PE, Mains-NE (non-earthed accessible
conductive part) and AP- NE (non-earthed accessible conductive
part)
ECG performance waveforms
Accuracy
±2%
± 5 % for amplitude of 2 Hz square wave only, fixed at 1 mV
Lead II configuration
Waveforms: rates
ECG complex (BPM): 30, 60, 120, 180, and 240
Square wave (50 % duty cycle) (Hz): 0.125 and 2
Ventricular fibrillation
Sine wave (Hz): 10, 40, 50, 60, and 100
Triangle wave (Hz): 2
Pulse (63 ms pulse width): 30 BPM and 60 BPM
Power ratings
Mains voltage outlet
120 V ac or 230 V ac
Mains voltage inlet
power range
90 to 132 V ac rms
180 to 264 V ac rms
Maximum current
20 A
16 A
Hz
50 or 60
50 or 60
Physical case
Dimensions (L x W x H)
17.63 cm x 8.38 cm x 28.45 cm (6.94 in x 3.30 in x 11.20 in)
Weight
1.6 kg (3.5 lb)
Environmental specifications
Operating temperature
10 °C to 40 °C (50 °F to 104 °F)
Storage temperature
-20 °C to 60 °C (-4 °F to 140 °F)
Operating humidity
10 % to 90 % non-condensing
Altitude
120 V ac mains supply voltage up to 5,000 m,
230 V ac mains supply voltage up to 2,000 m
General
Warranty
Biomedical Test Products
Two-year extended warranty (no-cost, available after first-year calibration at the Fluke Biomedical Cleveland Service Center, otherwise
standard one-year warranty applies)
3334509 Operator’s Manual (multilingual CD)
3334511 Getting-Started Guide
(hard copy, multilingual)
2795488 Ansur ESA612 Plug-In,
CD with demo version
1626219 Data Transfer Cable
ESA612 Accessory Kit
(country specific)
2195732 15 A to 20 A Adapter
(US only)
3326842 Null Post Adapter
3359538 5-to-5 Banana Jack to
ECG (BJ2ECG) Adapter
2248650 Carry Case
XXXXXXX Detachable Power Cord
(country specific)
Test Lead Set
Ordering information
3367232 ESA612 Electrical Safety
Analyzer (US), 115 V 20 A
3367259 ESA612 Electrical Safety
Analyzer (Europe), 230 V
3367244 ESA612 Electrical Safety
Analyzer (France), 230 V
3367267 ESA612 Electrical Safety
Analyzer (Israel), 230 V
3367271 ESA612 Electrical Safety
Analyzer (Australia), 230 V
3367280 ESA612 Electrical Safety
Analyzer (UK), 230 V
3367298 ESA612 Electrical Safety
Analyzer (Switzerland), 230 V
3454793 ESA612 Electrical Safety
Analyzer (Thailand), 230 V
3461965 ESA612 Electrical Safety
Analyzer (Japan), 100 V
3460932 ESA612 Electrical
Safety Analyzer (US), 115 V 20 A
w/Test Automation
3460959 ESA612 Electrical
Safety Analyzer (Europe), 230 V
w/Test Automation
3460944 ESA612 Electrical
Safety Analyzer (France), 230 V
w/Test Automation
3460967 ESA612 Electrical
Safety Analyzer (Israel), 230 V w/
Test Automation
3460971 ESA612 Electrical Safety
Analyzer (Australia), 230 V w/
Test Automation
3460980 ESA612 Electrical
Safety Analyzer (UK), 230 V w/
Test Automation
3460998 ESA612 Electrical
Safety Analyzer (Switzerland),
230 V w/Test Automation
3461001 ESA612 Electrical Safety
Analyzer (Thailand), 230 V w/
Test Automation
3462285 ESA612 Electrical
Safety Analyzer (Japan), 100 V w/
Test Automation
15
ESA620
Electrical Safety Analyzer
N10140
The ESA620 Electrical
Safety Analyzer
represents the next
generation in manual,
portable electrical
safety testers. With
selections of three test
loads, two protective
earth test currents,
and two insulation test
voltages this versatile
product can be used
worldwide to enhance
productivity and test to
standards of choice.
New DSP technology offers better accuracy of leakage
measurements throughout the ranges specified in the standards.
Equipped with ten safety-enhanced ECG posts, the ESA620
offers simulation of ECG and performance waveforms so both
electrical safety and basic tests on patient monitors can be
performed with a single connection. When used with optional
Ansur computer-based software plug-in, the ESA620 becomes
automated. This allows for standardization of test procedures,
capturing and storage of results, comparison to standard limits,
and printing of reports thus enabling the sophisticated
performance of the high-end electrical safety analyzers.
Specifications
Voltage
Range (mains voltage)
90 V ac to 132 V ac rms, 180 V ac to 264 V ac rms
Range (accessible voltage)
0 V ac to 300 V ac rms
Accuracy
± (2 % of reading +2 LSD)
Earth resistance
Modes
Two terminal or four terminal
Test current
> 200 mA ac or 10 A ac to 25 A ac
Ranges
0 Ω to 2 Ω
Accuracy
± (2 % of reading 0.015 Ω)
Equipment current
Mode
AC rms
Range
0 A to 20 A
Accuracy
± 5 % of reading ± (2 counts or 0.2 A, whichever is greater)
Leakage current
16
Patient load selection
(input impedance)
AAMI ES1-1993 Fig 1
IEC 60601: Fig 15
IEC 61010: Fig A-1
Crest factor
≤3
Ranges
0 μA to 199.9 μA
200 μA to 1999 μA
2.0 μA to 10.0 mA
Frequency response
DC to 1 kHz
1 kHz to 100 kHz
100 kHz to 1 MHz
Accuracy
± (1 % of reading + 1 μA)
± (2 % of reading + 1 μA)
± (5 % of reading + 1 μA)
Biomedical Test Products
Key features
• Superior compliance with
multiple standards: IEC60601,
IEC62353, VDE 751, ANSI/
AAMI ES1:1993, NFPA-99, AN/
NZS 3551, IEC61010
• Three test loads
• Expanded leakage ranges
through 10,000 µA
• Dual-lead resistance, leakage,
and voltage tests
• AC only, dc only and true-rms
leakage readings
• 100 % and 110 % mains
voltage for mains on applied
part (lead isolation) test
• 200 mA and 25 A AC PE test
current
• DSP filter technology for
improved accuracy in
leakage measurements
• 20 A equipment current
• More applied parts
selections
• ECG and performance
waveforms
• Intuitive user interface
• Easy-to-use applied parts
(ECG) connections
• Insulation posts on applied
parts connections
• Five different insulation tests
• Varying insulation test voltage
500 V dc and 250 V dc
• 2- or (optional) 4-wire ground
wire resistance
• Large display with adjustable
contrast
• Ergonomic design
• Optional Ansur plug-in
software
• USB connection
• CE, C-TICK and CSA for USA
and Canada
• RoHS compliance
• Optional Ansur test automation software to standardize
testing procedures, capture
waveforms, and print and
document test result
ESA620
Electrical Safety Analyzer
Specifications
Leakage current (continued)
Mains on applied part
test voltage
110 % of mains @ 230 V for IEC 60601
100 % of mains @ 115 V per AAMI
100 % of mains @ 230 V per 62353
Differential leakage
Ranges
10 µA to 199 µA
200 µA to 1999 µA
2 mA to 20 mA
Accuracy
± 10 % of reading ± (2 counts or .2 µA, whichever is greater)
Optional accessories
3116463 Ansur ESA620 Plug-In
1903307 Retractable Test Leads
2242165 Ground Pin Adapter
2067864 Kelvin Cable Set for
4-wire Measurement
Insulation resistance
Ranges
0.5 MΩ to 20 MΩ
20 MΩ to 100 MΩ
Accuracy
± (2 % of reading + 2 counts)
± (7.5 % of reading + 2 counts)
Source test voltage
500 V dc
250 V dc
ECG performance waveforms
Accuracy
±2%
± 5 % for amplitude of 2 Hz square wave only, fixed @ 1 mV Lead II
configuration
Waveforms
Rates
ECG complex (BPM): 30, 60, 120, 180, and 240
Ventricular fibrillation
Square wave (50 % duty cycle) (Hz): 0.125 and 2
Sine wave (Hz): 10, 40, 50, 60, and 100
Triangle wave (Hz): 2
Pulse (63 ms pulse width): 30 and 60
Power ratings
Mains voltage outlet
120 V ac
230 V ac
Mains voltage inlet
power range
90 V ac to 132 V ac rms
180 V ac to 264 V ac rms
Maximum current
20 A @ 120 V ac
16 A @ 230 V ac
Hz
50 or 60
Physical case
Dimensions (LxWxH)
31 cm x 23 cm x 10 cm (12.2 in x 9 in x 2.9 in)
Weight
4.7 kg (10.25 lb)
Certifications
Certifications
CE: IEC/EN61010-1 2nd Edition; Pollution degree 2
CSA: CAN/CSA-C22.2 No 61010-1; UL61010-1
C-Tick: Australian EMC
Environmental
Operating temperature
10 °C to 40 °C (50 °F to 104 °F)
Storage temperature
-20 °C to 60 °C (-4 °F to 140 °F)
Operating humidity
10 % to 90 % non-condensing
Altitude
To 2,000 meters @ 230 V ac (main supply voltage)
To 5,000 meters @ 120 V ac (mains supply voltage)
Biomedical Test Products
Included accessories
2814967 Operator’s Manual CD
2814971 Multilingual Getting
Started Guide
ESA620 Accessory Kit
(country specific)
2195732 15 A to 20 A adapter
(US only)
2814980 Carry case
1626219 Data Transfer cable
3326842 Null Post assembly
XXXXXXX Detachable Power
Cord (country specific)
Test Lead Set
Ordering information
ESA620 Electrical
Safety Analyzer
2785725 United States,
115 V, 20 A
3051408 Europe, 230 V
3051390 France, 230 V
3051413 Israel, 230 V
3051436 Australia, 230 V
3051449 United Kingdom,
230 V
3051451 Switzerland, 230 V
3326935 ESA620, US 115V
20A w/Test Automation
3326947 ESA620, EUR 230V
w/Test Automation
3326958 ESA620, FR 230V w/
Test Automation
3326964 ESA620, ISR 230V
w/Test Automation
3326986 ESA620, AUS 230V
w/Test Automation
3326999 ESA620, SWI 230V
w/Test Automation
3327002 ESA620, UK 230V w/
Test Automation
17
BP Pump 2
Key features
Non-Invasive Blood Pressure Simulator
• Dynamic BP simulators for
arm- and wrist-cuff monitors
The BP Pump 2 is a secondgeneration non-invasive blood
pressure (NIBP) monitor analyzer
that efficiently verifies oscillometric adult and neonatal NIBP.
The BP Pump 2’s unique feature set
includes tests to accurately interrogate wrist-cuff
monitors, internal
cuff volumes, and
optional 5-lead
synchronized ECG
simulations for
spot checks on the monitor. The simulated peripheral pulse is
synchronized with this electrical ECG signal for testing NIBP
monitors utilizing gated measurement for noise/artifact rejection.
• ECG and arrhythmia simulation
synchronizedwith BP (optional)
• Internal pump for high- and
low-pressure release verification, leak testing, and pressure
sourcing
• Internal adult/neonatal cuffs
elimates need for external cuffs
• Four respiratory artifacts,
including spontaneous breathing and controlled ventilation
• Multiple arrhythmia simulations, including premature
atrial contractions #1 and #2,
atrial fibrillation, and PVCs
• Optional Ansur test automation
software to standardize testing
procedures, capture waveforms, and print and document
test result
Specifications
Pressure generation/
measurement
Static-pressure range: 0 mmHg to 400 mmHg (53 kPa)
Difference between target pressure and actual pressure: -5 mmHg
Internal leak rate: < 2 mmHg per minute with minimum volume of 300 cc
Four respiratory
artifacts
3 spontaneous breathing; controlled ventilation
Three adult wrist-cuff
simulations
Normal, Hyper, Hypo
Pressure source
Specified pressure generated from 50 mmHg to 400 mmHg in selectable increments of 1 mmHg
Pressure gauge
Static pressure measured from 0 mmHg to 400 mmHg at the pressure port
Pressure relief test
Test for the NIBPM pressure relief valve (0 mmHg to 400 mmHg) with display of peak pressure
Neonate internal cuff
simulations
Internal neonate cuff; four standard neonate pressures
Neonate simulations
Cuff
Cuff
Cuff
Cuff
Irregular pulse
BP and ECG: Premature atrial contractions # 1, premature atrial contractions # 2, premature ventricular
contractions, atrial fibrillation and PVCs
User-definable
simulations
User-definable systolic and diastolic values, along with heart rate and pulse volume
Ranges:
Systolic pressure range Diastolic pressure range Heart rate
Pulse volume
20 mmHG to 250 mmHG 10 mmHG to 200 mmHG 30 BPM to 250 BPM 0.1 cc to 2.4 cc in increments of 0.1 cc
Simulation parameters
performance
Max pulse volume: 2.4 cc
#1:
#2:
#3:
#4:
Blood
Blood
Blood
Blood
pressure:
pressure:
pressure:
pressure:
35/15 60/30
80/50 100/70
Heart
Heart
Heart
Heart
rate:
rate:
rate:
rate:
120
120
120
120
BPM
BPM
BPM
BPM
Pulse
Pulse
Pulse
Pulse
volume:
volume:
volume:
volume:
Max heart rate: 200 BPM at 2.4 cc pulse volume; 250 BPM at 1.2 cc pulse volume
Internal neonatal cuff volume: 20 cc
Internal adult cuff volume (including NN volume): 310 cc
Heart rate setting accuracy: ± 1 BPM
Simulation units: kPa and mmHg (user selectable)
Pressure leak test
The pressure port is pressurized from 0 mmHg to 400 mmHg and keeps track of the pressure loss over time.
Peak pressure and present pressure are displayed at all times; leak rate is displayed when it is available.
Autosequences
Nine autosequences are provided for four tests and up to five simulations
Electrical ECG
(optional)
Signals: RA, LA, RL, LL, V
Waveform: Lead II
Amplitude: 1 mV peak (± 10 %) NIBP peripheral pulse synchronized with ECG signal
Connections: Optional external ECG adapter, physiological synchronization with NIBP
Heart rate for NIBP
simulations
18
Heart rate accuracy: + 1 BPM
Except for the following:
Patient condition weak pulse, tachycardia, obese, geriatric: + 1 % + 1 BPM
Patient condition mild exercise: + 1.5 % + 1 BPM
Patient condition strenuous exercise: + 3 % + 1 BPM
Biomedical Test Products
0.3
0.3
0.3
0.3
BP Pump 2
Non-Invasive Blood Pressure Simulator
Serial port
Bidirectional RS-232 port; baud rate of 9600 with no parity, one stop bit, and eight data bits
Pressure measurement Pressure-measurement units: kPa, mmHg, cmH20, cmH2O and psi (user selectable)
Range: 0 mmHg to 400 mmHg
Accuracy
Basic model (BP Pump 2L): 0 mmHg to 300 mmHg: + 0.5 % of reading + 1 mmHg;
301 mmHg to 400 mmHg: + 2 % of reading
High-accuracy version (BP Pump 2M): < 0.8 mmHg (0.1 kPa) throughout range
Parallel port
25-pin female connector, with D-subminiature style and pinouts conforming to IBM PC printer port (unidirectional), HP
and ASCII printers
Sample adult arm-cuff
simulation (standard
parameters)
Standard set of blood pressures:
BP #1:
Blood pressure:
BP #2:
Blood pressure:
BP #3:
Blood pressure:
BP #4:
Blood pressure:
BP #5:
Blood pressure:
BP #6:
Blood pressure:
BP #7:
Blood Pressure:
Patient condition
simulations
Healthy heart, weak pulse, mild exercise #1, strenuous exercise #2, obese subject, geriatric subject,
tachycardia, bradycardia
120/80 (93)
150/100 (116)
200/150 (166)
255/195 (215)
60/30 (40)
80/50 (60)
100/65 (76)
Heart
Heart
Heart
Heart
Heart
Heart
Heart
rate:
rate:
rate:
rate:
rate:
rate:
rate:
80
80 80
80
80
80
80
Pulse
Pulse
Pulse
Pulse
Pulse
Pulse
Pulse
volume:
volume:
volume:
volume:
volume:
volume:
volume:
0.68 cc
0.65 cc
0.6 cc
0.55 cc
0.75 cc
0.7 cc
0.69 cc
Arrhythmia simulations Premature atrial cont. #1, premature atrial cont. #2, premature ventricular cont., atrial fib and PVCs
Wrist simulations
Simulation #1:
Simulation #2:
Simulation #3:
Temperature
Operating: 15 °C to 40 °C (59 °F to 104 °F)
Storage: -20 °C to 65 °C (-4 °F to 149 °F)
Display
Bright, large 4-line x 40-character alphanumeric display with backlighting
Dimensions (WxDxH)
25.4 cm x 25.4 cm x 12.7 cm (10 in x 10 in x 5 in)
Weight
3.4 kg (7.5 lb)
Optional accessories
2755836 Ansur BP Pump 2 Plug-in
2222822 Soft-sided Vinyl
Carrying Case
2391894 ECG Adapter Block
(allows simulation of 5-lead ECG
waveforms)
2248899 Printer, Seiko DPU-41430 B, 120 V power supply
2399531 Printer, Seiko
DPU-414-30B, 200 V power supply
2238659 Serial Cable, D9M-D9F
2392328 Neonatal/external cuff
mandrel (truncated plastic cylinder
diameters: 7.6, 10, and 14 cm)
2391875 Wrist cuff mandrel (adult)
Biomedical Test Products
Blood pressure 120/80 (93)
Blood pressure 160/100 (120)
Blood pressure: 80/55 (63) Heart rate: 80 BPM
Heart rate: 80 BPM
Heart rate: 80 BPM
Included accessories
2391882 Accessory Kit (tubings
and fittings)
Users Manual
XXXXXXX Power Cord (country
specific)
Ordering information
BP Pump 2L (standard pressure
transducer)
2249036 United States, 120 V
2394895 Australia, 250 V
2394901 Denmark, 250 V
2394912 Schuko, 250 V
2394920 Israel, 250 V
2394935 Italy, 250 V
2394947 India, 250 V
2394958 Switzerland, 250 V
2394964 United Kingdom, 250 V
3334821 US 120V w/Test
Automation
3334839 AUS w/Test Automation
3334842 DEN w/Test Automation
3334856 SHK w/Test Automation
3334863 ISR w/Test Automation
3334874 ITAL w/Test Automation
3334888 IND w/Test Automation
3334895 SWZ w/Test Automation
3334901 UK w/Test Automation
Pulse volume: 0.5 cc
Pulse volume: 0.5 cc
Pulse volume: 0.5 cc
BP Pump 2M (high-accuracy
pressure transducer)
2249049 United States, 120 V
2394973 Australia, 250 V
2394986 Denmark, 250 V
2394999 Schuko, 250 V
2395003 Israel, 250 V
2395015 Italy, 250 V
2395026 India, 250 V
2395032 Switzerland, 250 V
2395044 United Kingdom, 250 V
3334912 US w/Test Automation
3334920 AUS w/Test Automation
3334935 DEN w/Test Automation
3334947 SHK w/Test Automation
3334958 ISR w/Test Automation
3334964 ITAL w/Test Automation
3334973 IND w/Test Automation
3334986 SWZ w/Test Automation
3334999 UK w/Test Automation
19
MPS450
Key features
Patient Simulator
• 12-lead ECG simulation with
independent outputs
• 43 arrhythmia selections
•Four invasive BP channels,
The MPS450 is Fluke
Biomedical’s next-generation,
portable, multiparameter
patient simulator for your
comprehensive testing and
training needs. Whether it’s
a quick check on a bedside
monitor, arrhythmia
recognition training, or pe
forming a complete PM on
the latest patient-monitoring
systems, this simulator is a
clear choice with its broad
range of physiological waveforms, easy-to-use interface,
and compact, portable size.
including Swan-Ganz
simulation
•Respiration and temperature
simulations
•ECG performance testing,
including R-Wave detection
•Large, bright 4-line x
20-character display
•RS-232 serial port
•Expansion port
•Compact and lightweight
Specifications
ECG normal sinus
rhythm
12-lead configuration with independent outputs
Amplitude: 0.05 mV to 5.5 mV
Rates: 30 BPM to 300 BPM
ECG waveform selections: Adult or pediatric
MPS450 optional accessories
Superimposed artifact: 50 Hz and 60 Hz, muscle, baseline wander,
respiration
ECG performance
Amplitude: 0.05 mV to 5.5 mV
Square wave: 2 Hz , 0.125 Hz
Pulse: 30 BPM, 60 BPM, 60 ms pulse width
Sine waves: 0.5 Hz to 100 Hz
Triangle wave: 2 Hz, 2.5 Hz
ST segments
Elevated/depressed: -0.8 mV to 0.8 mV in 0.1 mV steps; plus -0.05 mV
and 0.05 mV steps
Accuracy
All amplitudes ± 2 % of setting Lead II
All rates ± 1 %
All widths ± 1 %
Arrhythmia selections
(43 Total)
Premature rhythms
Supraventricular rhythms
Ventricular rhythms
Conduction defects
Pacemaker
Respiration
Baseline impedance: 500 Ω to 2000 Ω, leads I, II, III
Impedance variations: 3 Ω, 1 Ω, 0.5 Ω, 0.2 Ω
Rates: 15 BrPM to 120 BrPM and APNEA
Apnea periods: 12 seconds, 22 seconds, 32 seconds, and continuous
Product comparison chart
Model
medSim 300B
PS420
PS415
Arrhythmia selections
43
32
35
14
Respiration
Yes
Yes
Yes
Yes
BP channels
Yes, four
Yes, four
Yes, two
Yes, two
Yes
Yes
Yes
Yes
Swan-Ganz procedure
Temperature channels
User-programmable auto-sequences
Cardiac output
20
MPS450
Biomedical Test Products
Yes, one
Yes, two
Yes, one
Yes, one
Yes (with HHC3)
Yes, internal feature plus
HHC3 capability
No
Yes
Optional
Optional
Standard
No
MPS450
Patient Simulator
Specifications
Blood pressure
channels
Channels
4; synchronized with normal sinus rhythm rates; tracks arrhythmia activity
Transducer
Exciter voltages: ac and dc compatible
Sensitivity: 5 μV/V/mmHg and 40 μV/V/mmHg
Calibrated Rate: 80 BPM
Available selections
Static pressure
Dynamic pressure: Art (120/80), Radial Art (120/80), LV (120/0), RA/CVP
(15/10), RV (25/0), PA (25/10), PAW (10/2), and LA (14/4)
Swan-Ganz procedure: automated and manual control
Temperatures
0 °C, 24 °C, 37 °C, and 40 °C
Cardiac output
(optional)
Faulty-injectate curve
Left-to-right shunt curve
C.O. for 0°: 2.5 l/min, 5 l/min, and 10 l/min
C.O. for 24°: 2.5 l/min, 5 l/min, and 10 l/min
Cal Pulse: 1.5° for 1 second
Fetal/Maternal ECG
and IUP
simulations
(optional)
Fixed fetal heart rates: 60 BPM to 240 BPM
Dynamic fetal heart activity: Uniform deceleration, uniform acceleration,
early deceleration, late deceleration
Maternal heart rate: 80 BPM
Dynamic intrauterine pressure (IUP)
Waveform: positive bell-shaped pressure curve
Peak pressure: 90 mmHg, ± 4 mmHg (max)
Contraction interval: 2 minutes, 3 minutes, and 5 minutes (manual)
Duration: 90 seconds
Included accessories
Dimensions (WxDxH) 18.4 cm x 19 cm x 5 cm (7.3 in x 7.5 in x 2 in)
Weight
2720054 AC Battery Eliminator
2243350 Users Manual
0.6 kg (1.4 lb)
Ordering information
Model
Arrhythmia selections
PS410
PS400
DataSim 6100
35
12
34
Respiration
No
No
Yes
BP channels
No
No
Yes, three
Swan-Ganz procedure
No
No
Yes
Temperature channels
No
No
No
User-programmable auto-sequences
No
No
Yes
Cardiac output
No
No
Optional
Optional
accessories
2248623 Soft-Sided Vinyl
Carrying Case
2238659 Serial Cable
D9M-D9F
2226608 Cardiac-Output
Adapter Box
2645641 HHC3 Handheld
Controller
Cardiac output adapters
2227025 Gould/Spectramed
1465 Injectate Temperature
2392285 GE Medical/
Adapter (phone jack)
Marquette Cardiac Output
2226973 HP Injectate
Cable (interface cable for
Temperature Adapter (1/4 in
GE Medical/Marquette plus
phone plug)
monitors, including in-line
switch box to select injec2391990 Universal Injectate
tate temperature)
Temperature Adapter Pigtail
2227016 Gould/Spectramed (unterminated)
1445 Injectate Temperature 2392158 General Purpose
Adapter (4 pin)
Connector
2251364MPS450 (ECG 12-lead
simulation; invasive BP;
respiration; temperature; BP in
sync with ECG; large, bright
4-line x 20-character display;
R-wave-detection test; RS-232
port for computer control;
soft-key navigation; universal
ECG connectors; and flash
memory for easy program
upgrade)
2251373MPS450-CO (base
model plus cardiac-output
simulation)
2251399MPS450-FET (base
model plus direct fetal/maternal
ECG simulations with maternal
heart rate, selectable fetal heart
rate, and dynamic intrauterine
pressure waveform [IUP])
2251386MPS450-CO/FET (base
model plus cardiac-output
simulation and direct fetal/
maternal ECG simulations with
maternal heart rate, selectable
fetal heart rate, and dynamic
intrauterine pressure waveform
[IUP])
For a complete list of temperature and blood-pressure cables, contact us.
Biomedical Test Products
21
PS320
Fetal Simulator
Key features
• Mechanical heart for ultrasound simulation
The PS320 simulates fetal
and maternal ECG as well as
uterine activity to test and
troubleshoot fetal electronic
monitors and to train
clinical staff.
The unit is battery operated
and small enough to fit in a
pocket so mobile technicians
and clinical instructors can
take it anywhere.
The PS320 simulates several
fetal parameters, including
twins, as well as a wide range
of clinical scenarios for training
labor-and-delivery staff in how to recognize normal and abnormal
responses. An optional mechanical heart creates fetal heart sounds for
testing fetal monitor ultrasound cables and transducers.
PS320 offers an easy user
interface, providing a 2 x 16-character LCD display with adjustable contrast. The unit operates on a 9 V battery with low-battery
monitoring or functions with the supplied battery eliminator.
Specifications
Fetal ECG
Static rates
30 BPM, 60 BPM, 90 BPM, 120 BPM, 150 BPM, 180 BPM, 210 BPM,
and 240 BPM
ECG sensitivity
50 µV, 100 µV, 200 µV, 0.5 mV, 1 mV, and 2 mV
US-1 tracks primary fetal ECG rates
US-2 tracks secondary fetal activity for either independent “normal
or “twins
simulation, US-2 rate fixed at 140 BPM
22
Fetal patterns
Trend #1: Twin fetal patterns
Note: US-1 and fetal ECG track
these selections. US-2 is in
normal pattern, except during
TREND #1 selection.
Normal: Normal pattern
Tachycardia: Tachycardia pattern
Bradycardia: Bradycardia pattern
Arrhythmias: Arrhythmia pattern
Late deceler.: Late deceler.
Early deceler.: Early deceler.
Moderate deceler.: Moderate variable deceler.
Acceler.: #1: Acceler. wave #1
Acceler.: #2: Acceler. wave #2
Sinusoidal (high): Sinusoidal pattern, large change
Sinusoidal (low): Sinusoidal pattern, small change
Severe var. deceler.: #1: Severe deceler. wave #2
Severe var. deceler.: #2: Severe variable deceler
Prolonged deceler.: Prolonged deceler
Biphasic deceler.: Biphasic deceler
Exaggerated deceler.: Exaggerated deceler
Non-uniform deceler.: Non-uniform deceler
Var. deceler. (u): Variable deceler, “U shaped
Var. deceler. Tach: Variable deceler. with high-rate BPM
Var. deceler. (v): Variable deceler. “V shaped
Var. deceler. (post): Variable deceler. post exaggerated
Var. deceler.: Variable deceler.
Deceler. (position): Variable deceler. with position changes
Long deceler.: Long deceler.
Compensatory acceler.: Compensatory acceler
Biomedical Test Products
• TOCO simulation (External or
IUP)
• Ultrasound simulation
(including twins)
Maternal
ECG simulation
•
Fetal
ECG
(tracks ultrasound #1)
•
• Internal (DECG) and external
fetal ECG
• Uterine-activity selections
• Fetal beat-to-beat variability
• Periodic and non-periodic
fetal ECG changes
• Arrhythmia selections
• Compact, lightweight,
pocket-size plastic housing
• Battery operated with status
indications
• Special kits available with
all required accessories and
cables to test fetal monitors
for specified manufacturers
Optional accessories
2647372 Battery Eliminator
100 V ac to 240 V ac
2462177 Carrying Case,
Double Pocket
2462478 Philips 50 Series—
Ultrasound Cable
2462491 Agilent 50 Series
TOCO—External Cable
2462528 Agilent 50 and 8040
Series TOCO—IUP Cable
2462469 Corometrics TOCO—
External Cable
2462484 Corometrics—
Ultrasound Cable
2462519 Corometrics TOCO—IUP
Cable
2462528 HP/AG/PHILIPS IUP
TOCO Simulation Cable
2462537 HP (8040 Series)
Ultrasound Simulation Cable
2462543 HP (8040 Series) Ext
TOCO Simulation Cable
2462555 2462562 Oxford
Ultrasound Simulation Cable
2.0 MHz (blue)
2462570 Oxford IUP Simulation
Cable
2462217 RS-232 Cable
2651757 Mechanical Fetal Heart
Probe
2462123 Mechanical Fetal Heart
Cable
PS320
Fetal Simulator
Specifications
Fetal ECG (continued)
Variability selections
(added to fetal ECG)
Absent variability, low variability, mild variability, high
variability severe variability, long-term variability
Note: These patterns repeat and toco channel will perform toco wave
selected.
Optional mechanical
heart
Provides a mechanical interface to the ultrasound transducer; can be connected to either ultrasound channels.
This option, due to its power consumption, requires an
ac adapter to be connected.
Maternal ECG
ECG static rates: 60 BPM, 80 BPM, 100 BPM, 120 BPM,
140 BPM, and 160 BPM
ECG sensitivity: 0.5 mV, 1 mV, and 2 mV
Pattern selected during Trend #1 selection
Uterine activity
Execute waveform: Start toco waveform
Uterine wave Off: Stop toco waveform
Analog 0 V TO 1 V: Analog range 0 V to 1 V
(1 V = 100 mmHg)
Uterine wave 0 to 25: Range of toco waveform
Uterine wave 0 to 50: Range of toco waveform
Uterine wave 0 to 100: Range of toco waveform
Short duration: Toco waveform of short duration
Normal duration: Normal duration of toco waveform
Increased duration: Long duration of toco waveform
Uterine level = Zero: Zero toco channel
(automatic on power up)
Uterine static +20: Increase toco static level by
20 mmHg
(0 mmHg to 100 mmHg)
Incr. resting tone: Resting tone increases
Couping: 2 close toco waves
Tripling: 3 close toco waves
Uterine pressure sensitivity: 5 µV or 40 µV on power up
Note: Toco waveform selection
not available during Trend #1.
Important notes
• US-1 tracks the fetal ECG rates
• US-2 is the second ultrasound channel with a normal
fetal ECG pattern
• On the fetal and maternal ECG, the fetal ECG is 1/4
the size of the maternal ECG
The PS320 turns on in
the following state:
• Fetal ECG static rate @ 150 BPM
• US-1 tracks @ 150 BPM
• US-2 normal pattern
• Pressure sensitivity @ 5 µV/mmHg
• Pressure/Toco set to zero
• Maternal ECG rate @ 80 BPM
• ECG sensitivity @ 1 mV
• Toco wave is normal duration @ 0 to 50 divisions
(i.e. 0 mmHg to 50 mmHg)
Temperature
Operating
15 °C to 35 °C (59 °F to 95 °F)
Storage
0 °C to 50 °C (32 °F to 122 °F)
General information
Display
2-line x 16-character LCD with keypad
RS-232
Bidirectional interface, 9600 baud
Power
9 V battery/battery eliminator; low battery indication
set at 6 V
Housing
Plastic case
Dimensions
15.6 cm x 9.4 cm x 3.4 cm (6.1 in x 3.7 in x 1.3 in)
Weight
0.4 kg (0.9 lb)
Biomedical Test Products
Ordering information
2583030 PS320 Fetal Simulator
Kit #1: GE Corometrics
2794057 PS320 Fetal Monitoring Kit, GE
Corometrics, includes:
2583030 PS320 Fetal Simulator (includes
Operator Manual (2631693), Battery
Eliminator (2647372), 9 V Battery)
2651757 MFH-1 Mechanical Fetal Heart
Probe [includes Fetal Heart Cable (2462123)]
2397628 Soft-Sided Carrying Case for kit
2462217 17291 RS-232 Cable, PS320/420
2462484 Corometrics Ultrasound Simulation
Cable
2462469 Corometrics EXT. TOCO Simulation
Cable
2462519 Corometrics IUP TOCO Simulation
Cable
Kit #2: Hewlett-Packard, Agilent, Philips
Medical
2794069 PS320 Fetal Monitoring Kit, Series
50/8040 Philips Medical, Hewlett-Packard,
Agilent, includes:
2583030 PS320 Fetal Simulator (includes
Operator Manual (2631693), Battery
Eliminator (2647372), 9 V Battery)
2651757 MFH-1 Mechanical Fetal Heart
Probe [includes: Fetal Heart Cable (2462123)]
2397628 Soft-Sided Carrying Case for kit
2462217 RS-232 Cable, PS320/420
2462478 HP/AG/PHILIPS (50 Series)
Ultrasound Simulation Cable PS320
2462491 HP/AG/PHILIPS (50 Series) EXT
TOCO Simulation Cable PS320
2462528 HP/AG/PHILIPS (50 & 8040 Series)
IUP TOCO Simulation Cable PS320
2462537 HP (8040 Series) Ultrasound
Simulation Cable PS320
2462543 HP (8040 Series) EXT TOCO
Simulation Cable PS320
Kit #3: Oxford Medical
2794078 PS320 Fetal Monitoring Kit, Oxford
Medical, includes:
2583030 PS320 Fetal Simulator (includes
Operator Manual (2631693), Battery
Eliminator (2647372), 9 V Battery)
2651757 MFH-1 Mechanical Fetal Heart
Probe [includes: Fetal Heart Cable (2462123)]
2397628 Soft-Sided Carrying Case for kit
2462217 RS-232 Cable, PS320/420
2462570 Oxford TOCO IUP Simulation Cable
PS320
2462562 Oxford Ultrasound Simulation Cable
2 MHz (blue) PS320
2462555 Oxford Ultrasound Simulation Cable
1.5 MHz (yellow) PS320
Kit #4: Spacelabs Medical
2794040 PS320 Fetal Monitoring Kit,
Spacelabs Medical, includes:
2583030 PS320 Fetal Simulator (includes
Operator Manual 2631693), Battery Eliminator
(2647372), 9 V Battery)
2651757 MFH-1 Mechanical Fetal Heart
Probe [includes Fetal Heart Cable (2462123)]
2397628 Soft-Sided Carrying Case for kit
2462217 17291 RS-232 Cable, PS320/420
2462581 Spacelabs Ultrasound Simulation
Cable PS320
2462596 Spacelabs TOCO Simulation Cable
PS320
23
Index 2
Pulse Oximeter Simulator
The Index 2 is the most
versatile optical simulator for
oximeters on the market today.
This lightweight, portable tool
includes preloaded manufacturers’ R-curves and the ability
to define other “makes
for most pulse oximeters.
Motion presets, player mode,
transmission level control (TLC),
and computer commands boost
testing ability. The Index 2 can
also be configured to include
an optional electrical simulation feature with probe test. Optical and electrical simulations
allow technicians to isolate problems quickly. The probe test
identifies defective probes with quantitative test results.
Specifications
O2
Range: 35 % to 100 %
Resolution: 1 %
Accuracy: 100 % to 75 %: ± 1 % ± accuracy of the pulse oximeter under
test; 74 % to 50 %: ± 3 % ± the accuracy of the pulse oximeter under
test; < 50 % unspecified
Repeatability: ± 1 standard deviation
Rate
Range: 30 BPM to 250 BPM
Key features
• Portable
• 10 preloaded manufacturers’
R-curves
• User-definable “makes
for most other manufacturers
• New R-curves for
Masimo, Nonin and Philips
Medical Systems (formerly
Agilent/H-P) oximeters
• Six downloadable R-curve
spaces available
• Simultaneous simulation of
motion and arterial-oxygen
levels
• Arterial wave-amplitude
scale, calibrated in units of
perfusion
• Tap/shiver motion simulations
to explore the impact of motion
• RS-232 port for computer
control
• Physiological finger for
complete SpO2 tests
• Electrical simulations with
probe testing (optional)
Optional accessories
2204282 Soft Vinyl Carrying Case
2200102 Interface Cable,
medTester to Index 2 (RS-232;
female DB25 to female DB9)
For a complete list of electrical simulation
and probe test cables, contact us.
Resolution: 1 BPM
Accuracy: 1 % ± 1 BPM
Pulse amplitude
Probe test
Range: 0 % to 100 % of nominal pleth amplitude
Resolution: 1 %
Included accessories
Pulse amplitude is 20 % of maximum pass-through brightness
2226196 Operator’s Manual
2521465 Battery Charger
Nellcor and Ohmeda Electrical
Simulation and Probe Test Cable
(for Index2XLFE only)
Continuity/resistance test matrix: Measures all combinations of possible
interconnections in an XX point matrix
Range: 250 Ω to 150 kΩ
Accuracy: ± 5 % of reading
LED/detector
voltage test
Test format: Measures the voltage drop across Red LED, infrared LED, and
the photo detector when the internally generated test signal is applied
Test signal: Constant current source @ 1 mA
Open circuit: 2.5 V max
Measurement/display range: 0 V to 4 V
Accuracy: ± 5 % of reading, 0.4 V to 4 V
Dynamic test
Test format: Photodetector/diode response to both the red and infrared
light generated by the probe when pulsed by an internal test signal
Test signal: Pulsed between the two LEDs; constant current level @ 1 mA
Test results: Nominal range of 0 to 2000
Checksum
Sum of all locations in the program chip; for service use only
General information
24
Display
2-line x 24-character super twist LCD
Battery life
At least four hours of continuous use
Dimensions (LxWxH)
45.7 cm x 40.6 cm x 22.9 cm (18 in x 16 in x 9 in)
Weight
4.5 kg (10 lb)
Biomedical Test Products
Ordering information
Index 2XLF Pulse Oximeter
Simulator – Optical Finger
Simulation
2250232 United States, 120 V
2395290 Shuko, 250 V
2399900 Australia, 250 V
2399917 United Kingdom, 250 V
2447476 Japan, 100 V
Index 2XLFE Pulse Oximeter
Simulator – Optical Finger
and Electrical Simulation with
Probe Test
2250244 United States, 120 V
2395309 Shuko, 250 V
2399921 Australia, 250 V
2399939 United Kingdom, 250 V
2447465 Japan, 100 V
VT PLUS HF
Gas Flow Analyzer
The VT PLUS HF is Fluke
Biomedical’s premier
general-purpose gas flow
analyzer. In addition,
special display modes and
bidirectional flow make it
perfect for fully and efficiently
testing both conventional
mechanical ventilators and
high-frequency ventilators.
EC.6.20 now requires 100 %
completion of scheduled
life-support device preventive
maintenance every year, and
VT PLUS HF can help meet
those requirements. Multiple special-function tests make
troubleshooting quick and efficient.
Learning to use the VT PLUS HF is simple. Technicians control
the unit using the VT PLUS HF user-friendly command system,
or, if they’re familiar with the RT-200, they can switch to a
special control mode that uses RT-200-style commands.
Specifications
Low-pressure
High-pressure
Airway-pressure
Range
± 500 mmHg (10 psi)
± 100 psi
± 120 cmH 2O
Accuracy
± 0.5 % of reading or
± 1.5 mmHg, whichever is greater
± 1 % of reading or
± 0.1 psig, whichever
is greater
± 0.75 % of reading or ± 0.5 cmH 2O,
whichever is greater
Note
Fluid pressure may be
applied to the positive port;
however, fluids should
be kept from entering the
pressure port by using a
suitable length of connection tubing.
High-flow
Flow range
-25 lpm to 25 lpm
-300 lpm to 300 lpm
Accuracy
± 2 % of reading or ± 1 % of range, ± 2 % of reading or ± 2 % of
whichever is greater
range, whichever is greater
Low-flow dropout
0.01 lpm
—
High-flow dropout
—
25 lpm
Volume range
> ± 60 l
> ± 60 l
Notes
•
•
•
•
•
• Bidirectional flow,
pressure, volume, and oxygen
concentration, and pressure
measurements
• Low- and high-pressure, and
flow measurement capability
• Special HF mode—up
to 900 BPM (15 Hz)
• RS-232 and printer ports
• Included Windows-compatible
graphics software
• All 21 ventilator parameters
displayed at once on one
screen
• Operation by user-friendly
VT PLUS HF command mode
or special RT-200 command
mode
• Minimum, maximum, average,
absolute, and graph for all
parameters
• Multiple special-function tests
for efficient troubleshooting
Optional features
• Operation with a variety
of precision test lungs
available from Fluke Biomedical
to complete a fully NISTtraceable ventilator testing
system
Airway pressure is
internally tapped off the
proximal-flow sensor port,
which is the port closest
to the exhaust port on the
VT PLUS HF
Low-flow
Tidal-volume accuracy: ± 3 % of reading
or ± 2 ml, whichever is greater
Volume accuracy tested to 1 liter
Flow accuracy is specified for dry air
or oxygen
Below 3.0 lpm, measurement
accuracy is obtained by allowing the VT
PLUS HF to fully warm up or manually
zeroing before reading or documenting
measurement.
Key features
•
•
VT PLUS HF standard accessories
Tidal-volume accuracy: ± 3 % of
reading or ± 10 ml, whichever is
greater
Volume accuracy tested to 7 liters
Flow accuracy is specified for dry air
or oxygen
VT for Windows PC Software
(PC not included)
General
Dimensions (LxWxH)
25.4 cm x 25.4 cm x 12.7 cm (10 in x 10 in x 5 in )
Weight
4.53 kg (10 lb)
Biomedical Test Products
25
VT PLUS HF
Gas Flow Analyzer
Specifications
Ventilator parameter
Resolution
Inspiratory and expiratory tidal volume
0.1 ml
Range
Accuracy
As specified in high-flow/low-flow specification
Expiratory minute volume
0.001 lpm
0 L to 60 L
±3%
Breath rate
0.1 BPM
0.5 BPM to 150 BPM
±1%
Inspiratory-to expiratory time ratio (I:E ratio)
0.01
1:200 to 200:1
± 2 % or ± 0.1 s
Inspiratory time
0.01 s
0 s to 60 s
± 1 % or ± 0.02 s
Expiratory time
0.01 s
0 s to 90 s
± 1 % or ± 0.01 s
Peak inspiratory pressure
0.1 cmH 20
± 120 cmH 2O
± 3 % or ± 1 cmH 2O
Inspiratory pause pressure
0.1 cmH 20
± 120 cmH 2O
± 3 % or ± 1 cmH 2O
Mean airway pressure
0.1 cmH 20
± 80 cmH 2O
± 3 % or ± 0.5 cmH 2O
Positive end-expiratory pressure (PEEP)
0.1 cmH 20
-5 cmH 2O to 40 cmH 2O
± 3 % or ± 0.5 cmH 2O
Inspiratory hold time
0.01 s
0 s to 60 s
± 1 % or ± 0.1 s
Expiratory hold time
0.01 s
0 s to 90 s
± 1 % or ± 0.1 s
Peak expiratory flow
0.01 lpm
0 lpm to 300 lpm
± 3 % or ± 2 lpm
± 3 % or ± 2 lpm
Peak inspiratory flow
0.01 lpm
0 lpm to 300 lpm
Lung compliance
0.1 ml/cmH 20
0 ml/cmH2O to 150 ml/cmH 2O ± 5 % or ± 5 ml/cmH 2O
Flow bias
0.01 lpm
Inspiratory pause time: > 0.5 s
0 lpm to 30 lpm
± 2 % or ± 0.5 lpm
Expiratory pause time: > 0.5 s
Optional accessories
2222822 Soft Vinyl Carrying Case for
VT PLUS HF
2248587 Hard-sided Protective Carrying
Case for VT PLUS HF (limited to stock on
hand)
2397628 Soft-sided Carrying Case for
ACCU LUNG
Test Lungs
2387318 ACCU LUNG Portable Precision
Test Lung (with Soft-sided carrying case
for ACCU LUNG, model 2397628)
2251049 Michigan Instruments
Non-instrumented Single-adult Test Lung
2251008 Michigan Instruments
Non-instrumented Dual-adult Test Lung
2251013 Michigan Instruments
Non-instrumented Adult/Infant Test Lung
2213774 Siemens 190 Test Lung
Parabolic Airway Resistors (for use
with Michigan Instruments test lungs)
2212830 Parabolic Airway Resistor: RP5
2212934 Parabolic Airway Resistor: RP10
2212848 Parabolic Airway Resistor: RP20
2212853 Parabolic Airway Resistor: RP50
2212918 Parabolic Airway Resistor: RP200
2213140 Parabolic Airway Resistor: RP500
Printers
2248762 Printer 110 V, Citizen IDP 3110
2719653 Printer 220 V, Citizen IDP 3110
2238072 Parallel Printer Cable, D25M-C36M
26
Biomedical Test Products
Accessory Kit Parts
2133712 Filter, External
(bacterial), 1 each
2391777 Adapter, DISS 02 nut and
nipple with 1/4 in I.D. hose barb, 1 each
2133310 Tubing Adapter, Directional
(15 mm OD x 15 mm OD), 2 each
2133305 Tubing Adapter
(22 mm OD x 22 mm ID), 2 each
2133291 Tubing Adapter
(22 mm OD x 22 mm OD), 2 each
2133269 Tubing Adapter
(15 mm OD x 22 mm OD), 2 each
2133278 Tubing Adapter
(15 mm OD x 15 mm OD), 2 each
2133284 Tubing Adapter
(15 mm ID x 15 mm OD), 2 each
2133322 Tubing Adapter, Narrow Bore,
2 each
2213679 Barb (luer lock – male to 1/89
in ID tubing), 2 each
2133240 Tubing Adapter (1/4 in NPT
male to 1/8 in ID tubing barb fitting),
2 each
2133202Tubing Adapter (luer lock
1/16 in to bulkhead connection), 2 each
Included accessories
2137275 Operator’s Manual
2392054 VT for Windows® PC
Software
2238659 Serial Cable
2133387Tilt Stand
Power cord (country specific)
2131367 Accessory Kit (includes
16 accessories)
Ordering information
VT PLUS HF Gas Flow Analyzer
2128272 United States, 120 V
2399376 Australia, 250 V
2399383 Schuko, 250 V
2399390 United Kingdom, 250 V
Premium Precision Ventilator Test
Kit
(VT PLUS HF Gas Flow Analyzer; and
ACCU LUNG portable precision test
lung)
2387329 United States, 120 V
2425682 Australia, 250 V
2425694 Schuko, 250 V
2425701 United Kingdom, 250 V
VT-Plus Upgrades
(adds HF capability and RT-200
mode)
2240945 VT PLUS HF hardware
and firmware factory service
upgrade (for units lower than
hardware v1.01.01; additional flatrate charge required for factory
service/calibration)
DPM4
Parameter Tester
The versatile DPM4 tests and calibrates
flow and pressure generators used in many
medical devices. With several measurements
combined in a single, handheld device, the
DPM4 provides a cost-effective solution,
eliminating the need for multiple test meters.
The DPM4 features a menu-driven
interface for simple operation and an
easy-to-read screen that displays multiple
parameter measurements simultaneously.
N10140
Key features
All models
• Palm size
• High accuracy
• Differential pressure,
vacuum, and temperature
measurements
• Multiple user-selectable units
of measurement
• Simultaneous display of
multiple parameter
measurements
• Leak-detection/leak-rate
calculation
• Peak test function to capture
peak pressure
• RS-232 for computer control
Model 1G
• Pressure measurements in
-700 mmHg to 5000 mmHg
range
Specifications
Model 1H or 2H
Pressure measurement
Operating range
-350 mmHg to 350 mmHg
Accuracy
± 0.3 % of range
Units of measure
mmHg, mBar, cmH2O, psi, inHg, inH2O, kg/cm2, and kPa
Model 1G or 2G
Pressure measurement
Operating range
-700 mmHg to +5000 mmHg
Accuracy
± 0.3 % of range for temperatures from 21 °C to 25 °C and relative
humidity from 30 % to 70 % ± 0.3 % of range;
± 0.02 % of range per degree °C for temperatures < 21 °C or > 25 °C
with relative humidity from 30 % to 70 %
Units of measure
mmHg, mBar, cmH2O, psi, inHg, inH2O, kg/cm2, and kPa
Model 1H
• Pressure measurements in
-350 mmHg to 350 mmHg
range
Model 2G
• Barometric pressure, gas flow,
and humidity measurements
• Pressure measurements in
-700 mmHg to 5000 mmHg
range
Model 2H
• Barometric pressure, gas flow,
and humidity measurements
• Pressure measurements in
-350 mmHg to 350 mmHg
range
Temperature measurement (with optional temperature probe)
Operating range
-40 °C to 200 °C (-40 °F to 392 °F)
Accuracy
± (2 % of reading, + 0.5 °C)
Temperature units
°C, °F
Biomedical Test Products
27
DPM4
Parameter Tester
Specifications
Temperature Probe PT-100 and PT-1000
PT-100 Operating range
-200 °C to 750 °C (-328 °F to 1382 °F)
Accuracy
± 0.13 °C @ 100 °C (0.23 °F at 212 °F)
± 0.1 °C @ 0 °C (0.18 °F @ 32 °F)
± 0.2 °C @ 100 °C (0.36 °F @ 212 °F)
PT-1000 operating range
-200 °C to 750 °C (-328 °F to 1382 °F)
Accuracy
0.3 °C (0.5 °F)
Model 2G or 2H
Note: It is possible to compensate for the sea level and calibrate for offsets.
Optional accessories
2462177 Soft-Sided Carrying
Case
2461910 PT-100 Temperature
Probe
2461922 PT-1000 Temperature
Probe
2461905 Expansion Chamber
2461946 Tubing Kit with
Inflation Bulb
2462335 RS-232 Cable
Pressure measurement
Operating range
380 mmHg to 825 mmHg
Accuracy
± 2 % of reading
mmHg, mBar, cmH2O, psi, inHg, inH2O, kg/cm2, and kPa
Units of measure
Relative humidity
Note: An integrated sensor in the instrument determines relative humidity measurements.
Operating range
12 % RH to 95 % RH
Accuracy
± 3.5 % of reading ± 2 % @ 25 °C (77 °F)
Gas flow
Note: Gas flow measures with an embedded sensor with 11 calibration points to compensate non-linearity:
calibration constants are stored in firmware.
Gas compatibility
Air, N2, O2, CO, NO, CO2, N2O, NO2
Operating range
-750 ml/min to 750 ml/min
Accuracy
± 1 % of range or ± 5 % of reading
Gas flow units
ml/min or sccm (Standard Cubic Centimeter per Minute)
Peak flow test
Peak flow is captured in the unit selected for flow.
A reset key allows to restart the test.
Model 1G, 1H, 2G and 2H
Leak test and peak test
Leak test
Leak rate is computed in the unit selected for pressure over 15, 30, 45
or 60 seconds
Peak test
Peak pressure is captured in the unit selected for pressure.
A reset key allows to restart the test.
Temperature
Operating
15 °C to 35 °C (59 °F to 95 °F)
Storage
0 °C to 50 °C (32 °F to 122 °F)
General information
Power
9 V alkaline battery RG9 or battery eliminator
Battery life
> 7 hours
Dimensions (LxWxH)
156 mm x 94 mm x 34 mm (6.1 in x 3.7 in x 1.3 in)
Weight
0.4 kg (0.9 lb) with battery
Included accessories
2572323 Users Manual
2647372 Battery Eliminator
XXXXXXX Power Cord (country
specific)
XXXXXXX One 9 Volt Alkaline
Battery
Ordering information
DPM4 Parameter Tester
2583121 Model 1H (± 350 mmHg)
2631330 Model 1G (-700 to
5000 mmHg)
2637760 Model 2H (± 350 mmHg,
Press, Temp, Flow, RH)
2637772 Model 2G (-700 to
5000 mmHg, Press, Temp,
Flow, RH)
28
Biomedical Test Products
TNT 12000
X-Ray Test Device
The TNT 12000 X-Ray Test
Device is the newest and most
versatile instrument available
for measuring key x-ray imaging
parameters. It sets up in seconds
and measures kVp, dose, dose
rate, time, and half value layer
(HVL) in a single exposure. A
totally-wireless ZigBee® interface enables quick and easy
setup and the wireless detector
can be used with the companion
wireless display or a laptop computer.
X-ray imaging QA, calibration, and maintenance in today’s
demanding digital environment
require very high productivity
and compliance with local and
regional regulations. The TNT
12000 delivers high productivity
through 100 % wireless connectivity to either a display, which
instantly responds with all values
in a single exposure, or a laptop, where measured values are displayed and categorized in organized templates. Instant HVL with
just a single exposure further enhances productivity.
Featuring all-in-one-exposure measurements and ZigBee wireless communication combined with the rugged, reliable, and
accurate design that is a Fluke trademark, the TNT 12000 is truly
a new breed of non-invasive x-ray test tool. TNT 12000 is ideal
for use by OEM factory and field service engineers, independent
service organizations, physicists, biomedical and clinical engineers, and local and regional field inspectors of x-ray imaging
equipment. Its small, lightweight design enhances portability and
100 % wireless operation ensures setup can be accomplished in
seconds. Because the TNT 12000 measures all parameters with
every exposure, there is no need for complicated menu selection,
further enhancing user productivity. TNT 12000 always defaults
to the last use when powered on, so when used often for repetitive procedures it is truly a one-button (power-on) solution. The
TNT 12000 has the expanded functionality needed for modern
applications and can be managed with minimum keystrokes.
Users can identify and select custom measurement protocols and
save them for future use. Full test automation and documentation software is available for TNT 12000, creating the advantage
of accurate, repeatable testing processes. Ansur Test Automation
Software is only available from Fluke Biomedical.
Key features
•100 % ZigBee wireless operation between detector and
hand-held display or laptop
• Compact hand-held design
for maximum portability and
ease-of-use
• Simple user interface with
minimum menu routines
means setup in seconds
• Fluke Biomedical ruggedness
provides reliable operation.
It’s tough!
• 40 kHz sampling rate to
ensure accuracy with the
most difficult applications
• Global support network
delivering prompt service
and peace-of-mind to Fluke
Biomedical customers
worldwide
are instantly available on the
hand-held display or on the
user’s laptop. The latter application places measured values
into templates that are standard with the Excel software
provided with TNT 12000.
Because the TNT 12000 Excel
package is a spreadsheet, users
can customize their templates
and create their own reports
to send to others. Accuracy,
reproducibility, and reliability
are also critically important
and Fluke Biomedical is the
industry standard customers
count on to deliver uncompromised performance.
Primary end benefit
Productivity and accuracy are central goals when performing any
maintenance or QA process on diagnostic imaging equipment
because image system uptime is critical to patient care objectives.
TNT 12000 is small, portable, and wireless. It is easily transported to the imaging room, set up in seconds, and all results
Diagnostic Imaging Products
29
TNT 12000
X-Ray Test Device
Specifications
kVp measurements
Units
kVp Average (average of peaks during a specified interval) kVp
Max (highest peak during a specified interval) PPV (peak practical
voltage)
Ranges
Radio/Fluoro modes
40 kV to 150 kV
Mammo modes
Mo/Mo: 22 kV to 35 kV (standard calibration)
Rh/Rh: 25 kV to 49 kV (optional calibration)
Mo/Rh: 22 kV to 40 kV (optional calibration)
Mo/Al: 22 kV to 49 kV (optional calibration)
Rh/Al: 25 kV to 49 kV (optional calibration)
W/Rh: (optional calibration)
W/Ag: (optional calibration)
Resolution
0.1 kV
Optional accessories
Accuracy
Radio/Fluoro modes: ± 2 % or ± 1 kV, whichever is greater
35035 mA/mAs Meter
TNT 12000 Ansur Test
Automation Software Plug-in
Mammo modes: ± 2 % or ± 0.7 kV, whichever is greater
Reproducibility
± 1 % (std of 5 readings)
Filtration correction range
Radio/Fluoro modes: 1 mm Al to 10 mm Al or equivalent
Mammo mode: 0 mm Al to 0.4 mm Al added filtration
Dose/exposure measurements
Units
Roentgens, grays
Range
0.5 mR to 999 R
5 µGy to 999 Gy
Resolution
1 µR 0.01 µGy
Accuracy
±5%
Reproducibility
± 0.5 % (std % of five readings)
Filtration correction range
Radio/Fluoro modes: 1 mm Al to 10 mm Al or equivalent
Mammo mode: 0 mm Al to 0.4 mm Al added filtration
kV correction ranges
Radio/Fluoro modes: 40 kV to 150 kV
Mammo mode: Mo/Mo: 22 kV to 35 kV
Dose/exposure rate measurements
Units
Roentgens or grays per hour, minute, second, pulse
Range
8 mR/s to 10 R/s
70 µGy/s to 100 mGy/s
130 µR/pulse to 160 mR/pulse (@ 60 PPS)
12 µGy/pulse to 1.4 mGy/pulse (@ 60 PPS)
Resolution
1 µR/s
0.01 µGy/s
0.02 µR/pulse (@ 60 PPS)
0.2 nGy/pulse (@ 60 PPS)
Accuracy
±5%
Filtration correction range
Radio/Fluoro modes: 1 mm Al to 10 mm Al or equivalent
Mammo mode: 0 mm Al to 0.4 mm Al added filtration
kV correction range
Radio/Fluoro modes: 40 kV to 150 kV
Mammo mode: Mo/Mo: 22 kV to 35 kV
Exposure time—radiographic modes
Units
Milliseconds, pulses
Range (@ stated accuracy)
Milliseconds: 10 ms to 9999 ms
Pulses: 1 pulse to 999 pulses
Resolution
Milliseconds: 0.1 ms
Pulses: 1 pulse
30
Diagnostic Imaging Products
TNT 12000
X-Ray Test Device
Specifications
Accuracy
Optional accessories
Milliseconds: 1 % or 0.5 ms
Pulses: ± 1 pulse
Reproducibility
Milliseconds: 1 % or 0.5 ms
Pulses: ± 1 pulse
3335538 TA-TNT12K,
TNT 12000 with Test
Automation
3340639 TA-TNT12KWD,
TNT 12000 Wireless Detector
with Test Automation
Elapsed time—fluoro modes
Range
10 sec to 9999 sec
Resolution
0.1 second
Accuracy
1 % or 0.5 sec
Average pulse rate—pulsed fluoro
Range
1 pps to 999 pps (pulses per second)
Resolution
1 pps
Accuracy
1 pps
Average pulse width— pulsed fluoro
Range
10 ms to 999 ms
Resolution
0.1 ms
Accuracy
1 % or 0.5 ms
HVL
Range
Radio/Fluoro modes: 1.2 mm Al to 10 mm Al (equivalent)
Mammo mode: 0.2 mm Al to 0.6 mm Al (equivalent)
Resolution
Radio/Fluoro modes: 0.1 mm Al (equivalent)
Mammo mode: 0.01 mm Al (equivalent)
Accuracy
Radio/Fluoro modes: ± 10 % or 0.2 mm Al (equivalent)
Mammo mode: ± 5 % or 0.05 mm Al (equivalent)
Electrical specifications
Battery
Battery type: Lithium-ion, 3.7 V, 4000 mAh
Battery charge time: Approx. 5 hr
Battery discharge time: Approx. 8 hr
Battery cutoff voltage: 2.75 V
AC adapter
Input voltage: 100 V ac to 240 V ac
Input frequency: 50/60 Hz
Input current: 0.5 A (rms)
Output voltage: 6 V dc
Environmental specifications
Operating temperature
0 °C to 35 °C (32 °F to 95 °F)
Storage temperature
-35 °C to 50 °C (-31 °F to 122 °F)
Operating humidity
20 % to 80 % RH (non-condensing)
Physical specifications
Display
320 × 240 Color LCD
Size (WxDxH)
Display: 15.2 cm x 11.4 cm x 4.45 cm (6 in × 4.5 in × 1.75 in)
Detector: 15.2 cm x 11.4 cm x 4.45 cm (6 in × 4.5 in × 1.75 in)
Weight
Ordering information
Kit #1
TNT 12000 X-Ray Test Device
Included accessories
1320005000 TNT 12000WD
Wireless Detector
1330005000 TNT 12000D
Wireless Display
14-445 (2) AC Adapters/Chargers
50-197 Cable, Type A to Mini B
USB
50-198 Cable, Mini A to Mini B
USB
1320003000 Excel Software/
User Manual on CD
1320033000 Carrying Case
90-183 ZigBee® USB Dongle
TNT12QRG Quick Start Reference
Guide
Kit #2
3335774 TNT 12000WD Wireless
Detector
Included accessories
1320005000 TNT 12000WD
Wireless Detector
14-445 (1) AC Adapter/Charger
50-197 Cable, Type A to Mini B
USB
1320003000 Excel Software/
User Manual on CD
1320033000 Carrying Case
90-183 ZigBee® USB Dongle
TNT12QRG Quick Start Reference
Guide
Kit #3
Display: 0.422 kg (0.93 lb)
3335795 TNT 12000D Wireless
Display
Detector: 0.68 kg (1.5 lb)
Included accessories
1330005000 TNT 12000D
Wireless Display
14-445 (1) AC Adapter/Charger
50-197 Cable, Type A to Mini B
USB
50-198 Cable, Mini A to Mini B
USB
1320003000 Excel Software/
User Manual on CD
TNT12QRG Quick Start Reference
Guide
Diagnostic Imaging Products
31
35080M/199XRAY
Non-Invasive kVp Divider
and Medical ScopeMeter
The winning combination.
The 35080M and 199XRAY
are commonly used x-ray
tools unmatched by traditional
meters. This winning combination allows busy service
engineers and biomedical personnel the ability to perform
fast and accurate verification of
kVp values for calibration or QA
assessment. Fluke Biomedical
offers this combination in a
convenient kit with all the
accessories you need to get
started.
35080M Non-Invasive kVp
Divider
The 35080M Non-Invasive kVp
Divider quickly and accurately
measures kVp for all modalities. The unit checks both
above and below table tubes
and displays the direct kVp
values on either the 35050AT
Dosimeter, the 199XRAY Medical ScopeMeter, or optional Excel
Add-in software. The 35080M is highly portable and eliminates
the need for bulky and heavy high-voltage divider tanks. In fact,
it’s so compact in size that it fits into a shirt pocket.
A patented* wide-range filter pack is included with the
35080M and provides accurate readings for the range of 50 kVp
to 150 kVp. Four optional filter packs are available for use with
the 35080M for CT, mammographic, and mobile applications.
199XRAY Medical Scopemeter
The 199XRAY Medical ScopeMeter has all the normal oscilloscope
functions, as well as the speed, performance, and analysis power
for more-demanding applications. This high-performance oscilloscope offers the functionality of top-end bench instruments. With
up to 200 MHz bandwidth, 2.5 GS/s real-time sampling, and a
deep memory of 27,500 points per input, the 199XRAY is ideal for
engineers who need the full capabilities of a high-performance
oscilloscope in a handheld, battery-powered instrument.
In addition, the 199XRAY is specially designed for use with
x-ray systems. This ScopeMeter displays kVp waveforms and
direct kVp values simultaneously on an easy-to-read screen,
eliminating time-wasting calculations of scope traces to derive
kVp values.
32
Diagnostic Imaging Products
Key features
35080M
• New miniaturized configuration for convenient transport
to the job site
• Fast/easy non-invasive kVp
values for calibration/QA
• Non-invasive technology
eliminates the hazards of
high-voltage cables and the
need for bulky divider tanks
• Auto ON/OFF when
connected/disconnected
• Optional filter packs enable
testing in all modalities
• Rh/Rh measurement
capability when 35080M
is used with Cadmium
K-Edge and Linear Mammo
Filter Pack Pair
• Convenient storage/
carrying case
199XRAY
• ScopeMeter displays kVp
wave forms and direct
kVp values simultaneously
on an easy-to-read screen
• No more time spent
calculating scope traces
to derive kVp values
• Full medical oscilloscope
scope functionality with
color display
• ScopeMeter triggers on
standard interlaced and
high-resolution, noninterlaced video systems.
Triggers on all lines nonselectively or select an individual video line—up
to 2800 lines per frame
• mAs measurement calculates
current over time
• Smart averaging capabilities
• Extended vertical offset
• Selectable persistence mode
• Extended video triggering
• FlukeView® for Windows®
for documenting, enhancing, waveform analysis, and
archiving results
35080M/199XRAY
Non-Invasive kVp Divider
and Medical ScopeMeter
Specifications
35080M
Range
50 kVp to 150 kVp, using only the wide-range radiographic
filter pack (37617). Range and versatility are extended with the use
of special optional filter packs.
Accuracy
± 2 % of reading in the range of 50 kVp to 150 kVp, exclusive
of linearity, filtration, and gain effects. Linearity corrections
automatically applied when using 35080M with either 35050AT
Dosimeter or 199XRAY.
Response time
150 µs (10 % to 90 %)
Calibration
Internally generated signal provides a calibration check
Minimum time
for valid reading
1 ms, three-phase; one line cycle, single-phase
Tube current
Wide dynamic range from 4 mA to 3000 mA (three-phase),
2 mA to 1500 mA (single phase). Generator settings will vary in
waveform and distance. Less than ± 1 kVp effect for wide-range
radiographic filter pack covering 50 kVp to 150 kVp. Specialty filter
packs may have different characteristics.
Environmental
Temperature range: 0 °C to 35 °C
Relative humidity: 20 % to 80 %
Storage temperature: -35 °C to 50 °C
Orientation
Long axis of the Model 35080M Non-invasive kVp Divider oriented
perpendicular to axis of x-ray tube to eliminate
heel effect.
Power requirements
9 V battery, 60 hours operation
Dimensions (LxWxH)
6 cm x 9 cm x 21 cm (2.38 in x 3.5 in x 8.25 in)
Weight
0.68 kg (1.5 lb)
MA190 Accessory Kit
The MA190 accessory set enables interconnection of the 199XRAY for use in the field
of medical imaging and video systems. The
kit is included with the 199XRAY as a standard
accessory. The accessory kit includes the
following:
•FlukeView for Windows software
•50 Ω BNC feedthrough terminator, in insulated
enclosure, to maintain proper termination of test
connections during measurement
•50 Ω BNC terminator with 10:1 signal attenuation, to keep test terminal properly loaded while
getting optimum signal amplitude to benefit
from the instrument’s extended offset range
•1 Ω current shunt for current measurements, in
insulated enclosure
•Safety-designed BNC cable, 1.5 m (5 ft), with
plastic connectors for safe connection to test
terminals even when not at ground potential
•Insulated BNC (f) to 4 mm banana-plug adapter
•Dual 4 mm banana receptacles (1 red, 1 black)
Diagnostic Imaging Products
33
35080M/199XRAY
Non-Invasive kVp Divider
and Medical ScopeMeter
Specifications
Optional accessories
199XRAY
Field applications
Bandwidth
Dual input: 200, 100 or 60 MHz
Real-time sampling rate
Up to 2.5 GS/s
Trigger types
Connect-and-View ™ automatic triggering and a full range of manual
trigger modes
Extended video triggering
Along with its triggering capability for standard, interlaced TV
signals, the instrument also triggers on high-resolution, noninterlaced video systems. The ScopeMeter 199XRAY will trigger on
all lines (nonselective), or can select an individual video line from
systems with up to 2800 lines per frame.
Persistence
Digital persistence for analyzing complex dynamic waveforms,
similar to an analog scope.
Selectable persistence
Persistence mode with selectable decay time helps to find
anomalies in the wave shape and optimizes the display for color
information when working with composite color video.
Display
Fast-display update rate for seeing dynamic behavior
instantaneously
33551 CT filter pack
37351 Linear mammo filter pack
37355 Cadmium K-Edge
filter pack
37946 Mobile filter pack
38237 Low range filter pack
Automatic capture and replay of 100 screens
Maximum record length
27,500 points-per-input record length using ScopeRecord mode
Trend analysis
TrendPlot paperless chart recorder for trend analysis up to 22 days
Independently floating isolated inputs
Up to 1,000 V
Waveform compare
Waveform reference for visual comparisons and automatic pass/fail
testing of waveforms
Vpwm
Vpwm function for motor drive and frequency inverter applications
mA
mAs measurement calculates current over time. Using the cursors,
you can now measure directly the amount of radiation produced by
x-ray systems, or the total amount of charge applied to a system.
Smart averaging
Smart averaging gives the averaged waveform over successive
acquisitions, reducing noise in the displayed waveform. Thanks
to smart averaging, you can now also see an incidental curve of a
different wave shape with no effect on the averaged curve. This
allows you to see the averaged curve of a sequence of video lines,
for example, while still seeing the incidental flyback line flash by.
The oscilloscope gives an immediate response when the signal
makes large changes.
Extended offset
Vertical offset is now extended to a maximum of 16 divisions,
allowing vertical zoom-in for study of small details of the signal.
Electrical safety
1000 V CAT II and 600 V CAT III safety certified
Power requirements
Rechargeable NiMH battery pack, four hours operation
Dimensions (LxWxH)
25.6 cm x 16.9 cm x 6.4 cm (10.1 in x 6.6 in x 2.5 in)
Weight
2.0 kg (4.4 lb)
Documenting
Transfer waveforms, screens, and measurement data from the
ScopeMeter to a PC. Print or import the data into your report.
Enhancing
Add user text to individual ScopeMeter settings, providing guidance
to the operator when recalling a setup.
Archiving
Create a library of waveforms with your comments for easy
reference and comparison. Store complete replay cycles for
analysis of waveform changes. Store complete memory content
of the ScopeMeter on your PC for backup purposes.
Waveform comparison
Store reference waveforms, add operator instructions, and
send both to the ScopeMeter for waveform comparison and
“Pass/Fail” testing.
Analysis
Use cursors, perform spectrum analysis, or export data to other
analysis programs.
Diagnostic Imaging Products
35080M Non-Invasive kVp
Divider
199XRAY Medical ScopeMeter
MA190 Medical ScopeMeter
Accessory Kit
37617 Wide-range filter pack
121002900 Carrying Case
199XRAY
FlukeView® for Windows®
34
Included accessories
35080M/199XRAY
MA190 Medical ScopeMeter
Accessory Kit
35080M
37617 Wide-range filter pack
1210029000 Carrying case
Ordering information
35080M/199XRAY kVp Divider
and Medical ScopeMeter Kit
199XRAY Medical ScopeMeter
with kVp capabilities
35080M Non-Invasive kVp
Divider
07-CRXW and 07-QRX
Wireless CR RADCHEX and
QA RADCHEX
The wireless 07-CRXW CR
RADCHEX and 07-QRX QA
RADCHEX are factory radiationcalibrated, NISTtraceable light
meters that can be used to
calibrate (balance) CR plate
readers (also radiation-calibrated light meters) in the field.
The CR plate reader in the field
will be calibrated and traceable to the Fluke Biomedical
factory radiation-calibrated and
traceable x-ray-produced light
exposure.
Both 07-CRXW and 07-QRX have the same x-ray energy response as a
CR system (x-ray-to-light conversion efficiency is the same for various
beam conditions). This enables them to be used as accurate and precise replacements for the plate reader’s light measurement value (exposure index value).
Most importantly, the 07-CRXW and 07-QRX can save valuable time when calibrating or accessing CR readers and AEC used with multiple x-ray systems. These
x-ray systems may have different filtration and beam characteristics even when
located in the same department or imaging center. Balancing system performance
and dose is an important QA requirement best satisfied with either the 07-CRXW
or 07-QRX.
Applications
The wireless 07-CRXW is ideal for use by service engineers to initially calibrate and troubleshoot the CR plate reader, AEC, and density selector settings.
Physicists use 07-CRXW to assess the performance of CR-AEC for compliance to
clinical system speed objectives and patient dose. Radiology managers can use
07-CRXW to assist in the establishment of technique charts and training to determine ALARA techniques for various exam types. QA personnel can use 07-CRXW
to periodically document the performance of the CR system and to compare CR
to film/screen systems regarding desired ALARA objectives. The 07-CRXW uses
Bluetooth® to communicate with a laptop computer so that the CRLU (CR Light
Units), EI (Exposure Index) and estimated mR values measured by the electronic
cassette are automatically recorded and displayed on the laptop screen.
Key features
•Calibrates computed radiog-
raphy (CR) plate readers and
automatic exposure control
(AEC)
•Assesses ongoing performance of CR plate reader,
AEC, and automatic
programmed radiography
(APR)
•Sets and maintains desired
clinical system speed (dose)
of the CR system
•Calibrates CR plate readers
in the field to be traceable to
a factory radiation-produced
light condition
•Links radiation exposure
(mR) to the front of the plate
accurately and predictably to
a CR light measurement value
(CRLU)
•Provides a reliable and
reproducible method of
accurately maintaining a
CR manufacturers’ specific
factory calibration
•Provides three different
tube-head filtration choices
for users who desire a nonfiltered beam condition for
field plate reader calibration
•Software selections of
multiple beam conditions for
different CR manufacturers
•Ideal tools for service engineers, physicists, and quality
assurance personnel
Benefits
Using the 07-CRXW to calibrate x-ray system AEC and CR plate readers instead of
a dosimeter can improve productivity significantly. A full system AEC and CR plate
reader calibration process can take as much as six hours. Employing the 07-CRXW
the process can be completed in under two hours. A substantial productivity gain
for service, biomedical or physics professionals.
Essentially, the wireless 07-QRX performs all of the functions of the 07-CRXW,
however CRLU and speed numbers (representing the relative system speed of
the CR system compared to a film/screen system) are displayed on a LCD readout
built into the electronic cassette. A pressure sensitive On/Off switch activates the
07-QRX and is used to reset the meter between exposures. The values may be
manually entered into the software program on a laptop or PC if desired but a
laptop is not required to use the 07-QRX. The 07-CRXW and 07-QRX are designed
to work with all major brands of CR equipment.
The 07-QRX QA RADCHEX is ideally suited for fast and easy daily checks of AEC
and CR system exposure continuity. Data obtained from daily checks can be used
for trend analysis of individual systems as well as a way to monitor the balanced
performance of CR systems throughout the healthcare enterprise.
Diagnostic Imaging Products
35
07-CRXW
Wireless CR RADCHEX
Specifications
X-ray energy dependence
Simulates relative light output of photostimulatable phosphor
plate (PSP) within ± 3 % over kVp range of 60 kVp to 120 kVp
and a patient equivalent thickness range of 5 cm to 35 cm
(within specified operating rates)
Digital range
Computed radiography light units:
CRLU (AEC#); 0 to 500
CRLU (AEC#); 0 to 5000 (07-QRX)
Minimum CRLU rate
1.5/sec (approx. 0.15 mR/sec entrance exposure rate),
7/sec (approx. 0.7 mR/sec entrance exposure rate) (07-QRX)
Maximum CRLU rate
2500/sec (approx. 250 mR/sec entrance exposure rate), 25000/sec
(approx. 2500 mR/sec entrance exposure rate) (07-QRX)
Power on/off
Manual switch
Controls
Wireless communications with computer software; Bluetooth
wireless communications (07-CRX only)
Functions
Measures CRLU (AEC#); converts CRLU to CR manufacturers
specific CR plate reader light exposure index value (EI); user
selectable; calculates cassette input exposure values for various
x-ray beam conditions (exposure in mR plus backscatter)
Power requirements
Built-in NiMH rechargeable battery pack (9.6 V)
Typical battery life
between charging
5 hours, 20 hours (07-QRX)
X-ray beam filter
1.5 mm copper (B152-110); 6 in x 6 in complete with velcro straps
to attach to x-ray tube collimator housing
Environmental
requirements
Operating temperature: 15 ºC to 35 ºC (59 ºF to 95 °F)
General information
Electronic cassette
dimensions (WxDxH)
30 cm x 24 cm x 1.3 cm (12 in x 10 in x 0.5 in)
Weight
1.8 kg (3.9 lb)
Computer software
CD-ROM containing Microsoft® Excel program
Computer requirements
Computer capable of running Windows® 98 or higher with
Microsoft Excel, Computer not required to operate (07-QRX).
Software is provided with (07-QRX) to manually enter values if
desired
Optional accessories
07-AEC6 For film/screen applications to assess and calibrate
automatic exposure control (AEC)
– radiographic and mammographic systems
07-AEC6M For film/screen
applications to assess and calibrate automatic exposure control
(AEC) – mammographic systems
Ordering information
07-CRXW Wireless CR
RADCHEX, including PC-based
Excel documentation software
07-QRX Wireless QA RADCHEX,
including PC-based Excel documentation software
36
Diagnostic Imaging Products
76-424-4156
Nested CT Dose Phantom Kit for
Pediatric/Adult Head and Body
The innovative nested CT Dose
Phantom can be used with
any computed tomography
(CT) system designed to image
pediatric and adult head and
body. Each phantom segment
can provide separate dose
information. When performing
dose profile measurements,
the dose phantoms allow the
user to collect information for
the maximum, minimum, and
mid-range value of the nominal
tomographic section thickness.
This essential phantom kit
consists of three parts: an
adult body phantom, an adult
head phantom that doubles
as a pediatric body phantom,
and the new pediatric head
phantom, nested together
for easy storage and convenient transport. All are made of solid
acrylic with diameters of 32 cm, 16 cm and 10 cm, respectively.
Each part contains four probe holes around the perimeter, 90°
apart and 1 cm from the edge and the pediatric head (center
insert) has one probe hole in its center. The inside diameter of
the holes is 1.31 cm. Each part includes five acrylic rods for plugging all the holes in the phantom. A sturdy storage and carrying
case with wheels and pull handle that holds all three phantoms is
included. An optional smaller case without wheels is available.
The CT Dose Phantoms were designed in accordance with
the Food and Drug Administration’s performance standard for
diagnostic x-ray systems, which includes regulations specifically
applicable to CT systems (21 CFR 1020.33).
76-424-4156
Dimensions: (LxØ): 15.5 cm x 32 cm
Weight: 11.3 kg (25 lb)
Adult head/pediatric body
phantom
Dimensions: (LxØ) 15.5 cm x 16 cm
Pediatric head phantom
Dimensions: (LxØ) 15 cm x 10 cm
Weight: 2.3 kg (5 lb)
Weight: 1.3 kg (3 lb)
3 nested phantoms
Weight: 15 kg (33 lb)
76-419-4150
Weight
Body phantom: 14.5 kg (32 lb)
Head phantom: 3.6 kg (8 lb)
76-414-4150
Weight
Body phantom: 14.5 kg (32 lb)
Head phantom: 3.6 kg (8 lb)
Pediatric head phantom: 1.3 kg (2.85 lb)
Diagnostic Imaging Products
•Uniquely designed for pedi-
atric and adult computed
tomography dose index (CTDI)
in a lightweight 20 kg (44 lb)
total package
•Can be used with new multidetector (MDCT) units
•Meets requirements of FDA
performance standards
•All new carrying case with
wheels and pull handle
•Case includes space for CT
Ion Chambers (purchased
separately)
76-424-4156 Kit: Adult body phantom, adult head phantom, pediatric
head phantom, and acrylic rods
Optional accessories
89-419 Carrying Case with
wheels and pull handle for
76-419-4150
89-414 Carrying Case for
76-414-4150
Ordering information
Specifications
Adult body phantom
Key features
76-424-4156 Nested CT Dose
Phantom Kit for Pediatric/Adult
Head and Body including
carrying case with wheels and
pull handle
76-424-4150 Nested CT Dose
Phantom Kit for Pediatric/Adult
Head and Body including
carrying case without wheels
and pull handle
76-414-4150 CT Dose Phantom
Kit for Adult Head and Body
including carrying case
76-419-4150 CT Dose Phantom
Kit for Pediatric/Adult Head and
Body including carrying case
with wheels and pull handle
76-419 CT Pediatric Head Dose
Phantom with five plugs
76-414 CT Head Dose Phantom
with five plugs
76-415 CT Body Dose Phantom
with five plugs
37
18-220
Mammographic Accreditation Phantom
The 18-220 Mammographic Accreditation
Phantom will assist you in complying
with MQSA and the American College of
Radiology (ACR) Quality Control Programs.
This phantom is intended for use as
an integral part of the Mammographic
Quality Control Program, and when
used to perform routine mammographic
QC, it will help you quickly, easily, and
accurately evaluate the overall imaging
performance of your mammographic
system. This phantom will detect imaging
changes so you can make the necessary
corrections in order to maintain your
system at peak performance.
The 18-220 Mammographic
Accreditation Phantom was designed to
test the performance of a mammographic
system by a quantitative evaluation of the
system’s ability to image small structures similar to those found
clinically. Objects within the phantom simulate calcifications,
fibrous calcifications in ducts, and tumor masses.
The phantom is also designed to determine if a mammographic system can detect small structures that are important
in the early detection of breast cancer. Test objects within the
phantom range in size from those that should be visible on any
system, to objects that will be difficult to see even on the best
mammographic system.
Specifications
Key features
•Helps ensure optimum
image quality and peak
performance of the
mammographic system
•Essential for MQSA
compliance
•Complies with ACR
phantom specifications
and QC requirements
•Contains test objects to
simulate indications of breast
cancer; punctuate calcifications, tissue fibrillar extensions in adipose tissue, and
tumor like masses
•Ideal for monitoring the
overall performance of your
mammographic imaging
system, x-ray generator,
film processor, and screenfilm combination
•Equivalent in x-ray attenuation to a 4.5 cm compressed
“average” breast
Optional are two 2 cm acrylic
plates. The addition of these two
plates, when combined with the
overall 4.4 cm thickness of the
phantom,
will allow the system image quality
to be checked in varying thicknesses of 2 cm to 8.5 cm. Both of
these items are recommended by
ACR in their Mammography Quality
Control Procedure.
Optional accessories
Phantom body
Material
Acrylic
Dimensions
Overall (WxDxH): 10.15 cm x 10.8 cm x 4.4 cm (4 in x 4.25 in x 1.75 in)
18-237 Acrylic Plates, 10 cm x
10 cm x 2 cm thick, set of 2
18-205 Acrylic Contrast Test
Disc, 1 cm Ø x 4 mm
89-220 Carrying Case
Acrylic base: 3.4 cm in thick (1.375 in)
Cover: 3 mm thick (0.128 in)
Acrylic contrast test disk: 1 cm Ø x 4 mm
Weight
0.55 kg (1.2 lb)
Wax insert
Nylon fibers
Al2O3 Specks
1) 1.56 mm
7) 0.54 mm
12) 2 mm
2) 1.12 mm
8) 0.4 mm
13) 1 mm
3) 0.89 mm
9) 0.32 mm
14) 0.75 mm
4) 0.75 mm
10) 0.24 mm
15) 0.5 mm
5) 0.54 mm
11) 0.16 mm
6) 0.4 mm
38
Masses (thickness)
Diagnostic Imaging Products
Included accessories
Acrylic contrast test disk,
faxitron x-ray image, and
magnifying glass
Ordering information
18-220 Mammographic
Accreditation Phantom
451B
Ion Chamber Survey
Meter with Beta Slide
The auto-ranging 451B measures
radiation rate and accumulated dose
from beta, gamma and x-ray radiation sources. The 451B’s site surveying
capabilities make it well suited for a
wide range of end users, including:
police and fire departments, x-ray
manufacturers, government agencies,
state inspectors, emergency response
and HAZMAT teams, nuclear medicine
labs, hospital radiation safety officers,
and nuclear power workers.
The ion-chamber detector allows for
a fast response time to radiation from
leakage, scatter beams and pinholes.
Additionally, the low-noise chamber
bias supply provides for fast background settling time. A sliding beta
shield serves as an equilibrium thickness for photon
measurements and enables beta discrimination.
The digital display features an analog bar graph,
2.5 digit digital readout, low battery and freeze
(“peak hold”) mode indicators, and an automatic
backlight function. User controls consist of an
ON/OFF button and a MODE button. The case is constructed of lightweight, high-strength materials and
is sealed against moisture. The RS-232 interface can
be connected directly to a computer for use with the
Excel add-in for Windows® (451EXL), enhancing the
functionality of the instrument. This software allows
for data retrieval, user parameter selection and
provides a virtual instrument display with audible
(requires sound card) and visual alarm indication.
Key features
• High sensitivity measurement
of rate and dose simultaneously, with the capability to
record peak rate
• Auto-ranging and autozeroing
• RS-232 communications
interface with optional
Windows-based Excel add-in
for data logging
• Ergonomic, anti-fatigue
handle with replaceable grip,
wrist strap and tripod mount
• Programmable flashing LCD
display and audible alarm
• Easily-accessible battery door
(operated by two 9-volt alkaline batteries) on the outside
of the bottom case
• Available with dose equivalent energy response (SI units)
• Shoulder strap and handle
which can be easily decontaminated (Nuclear Power
plant specific unit)
451B typical energy dependence
1.2
1.1
1
Indicated/Actual
0.9
Side
Slide - Closed
0.8
Slide - Open
0.7
0.6
0.5
0.4
0.3
0.2
10
Radiation Safety Products
100
Effective (keV)
1000
10000
39
451B
Ion Chamber Survey
Meter with Beta Slide
Optional accessories
Specifications
Radiation detected
451EXL 451 Assistant for Excel,
includes RS-232 interface cable
Alpha above 7.5 MeV, Beta above 100 keV, and Gamma above
7 keV
Operating ranges
190HPS Single Unit Carrying
Case
450UCS Check Source,
238
Uranium, 0.064 µCi,
impregnated 2 x 2 in yellow
card
0 to 5 mR/h or 0 to 50 µSv/h
0 to 50 mR/h or 0 to 500 µSv/h
0 to 500 mR/h or 0 to 5 mSv/h
0 to 5 R/h or 0 to 50 mSv/h
0 to 50 R/h or 0 to 500 mSv/h
Accuracy
Within 10 % of reading between 10 % and 100 % of full
scale indication on any range, exclusive of energy response.
Calibration source is 137Cs.
Detector
Chamber
349 cc volume air ionization
Chamber wall
246 mg/cm2 thick phenolic
Chamber window
6.6 mg/cm2 mylar, protected by steel mesh, 46 cm 2 detection
area
Beta slide
440 mg/cm2
451B-DE-SI
In order to achieve energy response consistent with
measurements of H*(10) as required by ICR4-47, aluminum
has been added to the back wall, 38 % of the side wall area,
and to the beta slide. With the Beta Shield open, the 451B
can measure skin dose at 10*(0.07), and Deep Dose H*(10)
with Beta Shield closed.
Controls
ON/OFF and MODE
Automatic features
Auto-zeroing, auto-ranging, and auto-backlight
Response time
Range
Response
0 to 5 mR/h (0 to 50 µSv/h)
8s
0 to 50 mR/h (0 to 500 µSv/h)
2.5 s
0 to 500 mR/h (0 to 5 mSv/h)
2s
0 to 5 R/h (0 to 50 mSv/h)
2s
0 to 50 R/h (0 to 500 mSv/h)
2s
Display LCD analog/digital with backlight
Analog
100 element bar graph 6.4 cm long. Bar graph is divided into
5 major segments, each labeled with the appropriate value
for the range of the instrument.
Digital
2.5 digit display is followed by a significant zero digit
depending on the operating range of the instrument. The
units of measurement are indicated on the display at all
times. Digits are 6.4 mm (0.25 in) high. Low battery and
freeze indicators are also provided on the display.
Modes
Integrate mode
Operates continuously 30 seconds after the instrument
has been turned on. Integration is performed even if the
instrument is displaying in mR/h or R/h.
Freeze mode
Will place a tick mark on the bar graph display to hold on
the peak displayed value. The unit will continue to read and
display current radiation values.
Environmental
40
Power requirements
Two 9 V alkaline, 200 hours operation
Warm-up time
One minute
Temperature range
-20 °C to 70 °C (-4 °F to 158 °F)
Relative humidity
0 to 100 %, @ 60 °C
Geotropism
Less than 1 %
Dimensions (WxDxH)
10 cm x 20 cm x 15 cm (4 in x 8 in x 6 in)
Weight
1.11 kg (2.5 lb)
Radiation Safety Products
Ordering information
451B-RYR Ion Chamber Survey
Meter with Beta Slide and
standard chamber
451B-DE-SI-RYR Ion Chamber
Survey Meter with Beta Slide
and dose equivalent chamber
451P
Pressurized µR Ion Chamber
Survey Meter
Key features
• High sensitivity µR meas-
urements of rate and dose
simultaneously, with the
capability to record peak rate
• Ergonomic, anti-fatigue
handle with replaceable grip,
wrist strap and tripod mount
• Programmable flashing LCD
display and audible alarm
• Easily-accessible battery
door (operated by two 9-volt
alkaline batteries) on the
outside of the bottom case
• RS-232 communications
interface with optional
Windows-based Excel add-in
for data logging
• Available with dose equivalent energy response (SI units)
• Shoulder strap and handle
which can be easily decontaminated (Nuclear Power
plant specific unit)
The auto-ranging 451P features
a pressurized ion chamber,
providing enhanced sensitivity
(µR resolution) and improved
energy response to measure
radiation rate and dose from
x-ray and gamma sources.
Originally designed to measure
leakage and scatter around
diagnostic x-ray and radiation
therapy suites, the 451P’s site
surveying capabilities make it
well-suited for a wide range
of end users, including: x-ray
manufacturers, government
agencies, state inspectors,
biomedical technicians, and
maintenance technicians for
airport baggage scanners.
The ion chamber detector allows for a fast response time to
radiation from leakage, scatter beams and pinholes. Additionally,
the low noise chamber bias supply provides for fast background
settling time.
The digital display features an analog bar graph, 2.5 digit
digital readout, low battery and freeze (“peak hold”) mode indicators, and an automatic backlight function. User controls consist
of an ON/OFF button and a MODE button. The case is constructed
of lightweight, high strength materials and is sealed against
moisture. The RS-232 interface can be connected directly to a
computer for use with the Excel add-in for Windows (451EXL),
enhancing the functionality of the instrument. This software
allows for data retrieval, user-parameter selection and provides a
virtual instrument display with audible (requires sound card) and
visual alarm indication.
451P typical energy dependence
1.2
Typical energy
dependence
1.1
Nitrogen gamma rays are
110 % to 120 % of indicated
readings as determined at the
University of Lowell
16
1
Indicated/Actual
0.9
Side
0.8
Face
0.7
Front
0.6
0.5
0.4
0.3
0.2
10
Radiation Safety Products
100
Effective (keV)
1000
10000
41
451P
Pressurized µR Ion Chamber
Survey Meter
Optional accessories
Specifications
Radiation detected
Operating ranges
Accuracy
Beta above 1 MeV, Gamma and x-rays above 25 keV
0 to 500 µR/h or 0 to 5 µSv/h
0 to 5 mR/h or 0 to 50 µSv/h
0 to 50 mR/h or 0 to 500 µSv/h
0 to 500 mR/h or 0 to 5 mSv/h
0 to 5 R/h or 0 to 50 mSv/h
Within 10 % of reading between 10 % and 100 % of full
scale indication on any range, exclusive of energy response.
Calibration source is 137Cs
451EXL 451 Assistant for Excel,
includes RS-232 interface cable
190HPS Single Unit Carrying
Case
62-103 Check Source, 137Cs,
10 µCi. Flat disc, 1 inch diameter
Due to recent international airline
shipping policies/restrictions,
radioactive “Check Source” will not
be shipped with the main unit
outside US.
Detector
Chamber
230 cc volume pressurized air ionization chamber to 8
atmospheres or 125 psi
Controls
ON/OFF and MODE
Automatic features
Auto-zeroing, auto-ranging, and auto-backlight
Step increase, background to
Time to reach 90 % of final
Response time
value
Analog response time from
10 % to 90 % of reading for
400 μR/h
4.8 s
a full scale step increase is
4 mR/h
3.3 s
dependent on operating range.
10 mR/h
4.3 s
Response time for a step
increase in radiation exposure 40 mR/h
4.5 s
rate from background:
100 mR/h
2.7 s
1 R/h
2s
4 R/h
2.7 s
10 % to 90 %
This table shows time measured Range
from 10 % to 90 % of final value 0 to 500 μR/h (5 μSv/h)
5s
for a step increase or decrease
0 to 5 mR/h (50 μSv/h)
2s
in exposure rate such that a
0 to 50 mR/h (500 μSv/h)
1.8 s
range change does not occur.
These values are the response
0 to 500 mR/h (5 mSv/h)
1.8 s
times for the various ranges:
0 to 5 R/h (50 mSv/h)
1.8 s
Analog/Digital display LCD with backlight
Analog
100 element bar graph 6.4 cm (2.5 in) long. Bar graph is divided
into five major segments, each labeled with the appropriate value
for the range of the instrument.
Digital
2.5 digit display is followed by a significant zero digit depending
on the operating range of the instrument. The units of
measurement are indicated on the display at all times. Digits are
0.25 inches
(6.4 mm) high. Low battery and freeze indicators are also
provided on the display.
Modes
Integrate mode
Operates continuously 30 seconds after the instrument has been
turned on. Integration is performed even if the instrument is
displaying in mR/h or R/h.
Freeze mode
Will place a tick mark on the bar graph display to hold on the
peak displayed value. The unit will continue to read and display
current radiation values.
Environmental
Power requirements
Two 9 V alkaline, 200 hours operation
Warm-up time
Less than two minutes for initial operation when the instrument
is in equilibrium with ambient temperature.
Temperature range
-20 °C to 50 °C (-4 °F to 122 °F)
Relative humidity
0 to 100 %
Geotropism
Negligible
Dimensions (WxDxH)
10 cm x 20 cm x 15 cm (4 in x 8 in x 6 in)
Weight
1.07 kg (2.4 lb)
42
Radiation Safety Products
Ordering information
451P-RYR Pressurized µR Ion
Chamber Survey Meter with
standard chamber
451P-DE-SI-RYR Pressurized µR
Ion Chamber Survey Meter with
dose equivalent chamber
Note: Due to the pressurized ion
chamber, the 451P is considered
U.S. Department of Transportation
(DOT) “Dangerous Goods” and must
be shipped via IAW DOT special
permit DOT-SP 13187.
ASM-990 Series
Key features
Advanced Survey Meter
• Simultaneous auto-scaling
measurement of rate and dose
with the capability to record
peak rate
• Up to five different probes can
be calibrated with one unit
• Data-logging survey mode
feature allows user to store
up to five separate survey
sequences
• Saved data can be uploaded
to a PC via included Infrared
Data (IrDA) transmitter
• Easy-to-use multifunction
keypad for intuitive menu
navigation
• Backlit analog/digital LCD
display with full-range audio
output capability
• Barcode scanner (optional)
• Auto power-down feature
extends battery life
The ASM-990 Series Advanced
Survey Meter can detect alpha,
beta, gamma, or x-ray radiation within an operating range
of 1 µR/hr to 1 R/hr (1 to
5,000,000 CPM), depending
on the selected probe (GeigerMueller, neutron, proportional
counter, scintillation). With the
proper probe combination, this
meter can be used as a general
survey meter, an area monitor,
a wipe-test counter, and a contamination monitor.
Designed to meet the hightechnology requirements
of health physics, medical
physics, and nondestructive testing applications, the ASM-990 Series is wellsuited for a wide range of end users, including: radiation safety officers, nuclear
medicine laboratories, diagnostic x-ray and hospital emergency-room technicians, environmental-health physicists, and emergency responders.
The unit, with purchased probe, is shipped calibrated and ready-to-use and
includes a MHV connector to ensure compatibility with all Fluke Biomedical
probes. The 992 includes a fully-calibrated internal energy-compensated
1 R/hr GM detector. The 993 features a fully-calibrated internal pancake
detector as well as an internal energy-compensated 1 R/hr GM detector.
Specifications
ASM-990 and ASM-992
Operating modes
Operating rate ranges
(dependent on selected
probe)
• Rate
• Scaler (dual option: “based on
• Integrate measurement” or “based on time”)
• Timed Peak Hold
• Data Logging
µR/hr
mR/hr
µrem/hr
mrem/hr
rem/hr
µSv/hr
CPM
mSv/hr
CPS
Sv/hr
DPM 99mTc
DPS 131I
kBq 123I
MBq 201Tl
µCi 67Ga
mCi 18F
Ci 57Co
µR
mR
R
µrem
mrem
rem
Complementary units in the
integrate mode with the
integrated time value in
seconds
µSv
mSv
Sv
C (counts)
kC
MC
D (distintigrations)
kD 99mTc
MC 131I
Accuracy (dependent on
selected probe)
Within 10 % of reading between 10 % to 100 % of full scale indication on any range, exclusive of typical
energy dependence
Detector
Accepts GM detectors and scintillation probes operating at high voltages between 500 volts and 1300 volts
Temperature range
-10 °C to 50 °C (14 °F to 122 °F)
Relative humidity
0 % to 95 %, non-condensing
Warm up time
5 second diagnostic check
Check source
Natural uranium, mounted on the case
Power requirements
Two “D” cells, 150 hours operation, automatically indicates when battery is low
Housing material
Proprietary polycarbonate, splash-proof case
Display
Liquid crystal display, 5.6 cm x 5.6 cm (2.2 in x 2.2 in)
Bq
Radiation Safety Products
125
I
R/hr
43
ASM-990 Series
Advanced Survey Meter
Data logging modes
The ASM-990 Series Log Data
feature can easily be accessed
via the setup sub-menu. The
unit can log/save a maximum
of 500 data points in any of
three separate modes (manual
and survey modes can utilize
the optional barcode scanner.)
Manual: Individual rate
data points can be saved by
pressing the Start/Stop/Rst/
Save button.
Timed: Data points automatically saved at user-selectable
time intervals in the range of
1 second to 255 seconds.
Survey: Programmed sequences
accessed via the menu system.
Pressing the Start/Stop/Rst/Save
button saves the current reading
and displays the next survey
location.
Programming of survey
sequences, as well as retrieval
of logged data, is accomplished
via the built-in IrDA port.
Label names up to 20
characters can be programmed
into the unit to identify the
individual survey locations.
Probe connector: The unit
is available with a MHV connector. The unit can be used
with multiple probes (5 total)
by selecting the appropriate
probe from the main menu. All
calibration data for each probe
is stored in the unit’s EEPROM.
Specifications
ASM-992 and ASM-993
Range
0.1 mR/hr to 1 R/hr
Radiation detected
Gamma above 60 keV
Accuracy
± 10 % of reading between 10 % and 100 %
of full scale on any range, exclusive of energy
dependence
Weight (without probe)
ASM 990, 992: 0.95 kg (2.1 lb)
ASM 993: 1.09 kg (2.4 lb)
Dimensions (WxDxH)
10.47 cm x 27.71 cm x 6.35 cm
(4.125 in x 10.91 in x 2.5 in)
Typical energy dependence
Internal energy compensated 1 R GM detector
1.4000
1.2000
Indicated/Actual
1.0000
0.8000
0.6000
0.4000
0.2000
0.0000
10
100
1000
Energy (keV)
44
Radiation Safety Products
10000
ASM-990 Series
Advanced Survey Meter
Optional accessories
Specifications
ASM-993
Radiation detected
Alpha above 3.5 MeV, beta above 35 keV and gamma above 6 keV
Range
Background to 80 mR/hr
Window
15 cm2 (1.75 in Ø) mica, 1.4 mg/cm 2 to 2.0 mg/cm2
Typical background
30 CPM
Protective screen
Stainless steel, hexagonal pattern providing 86 % open area
Accuracy
± 10 % of reading between 10 % and 100 % of full scale on any range,
exclusive of energy dependence (protective cover open)
Efficiency
The internal pancake
detector efficiency is
shown below. In a recent
performance check, the
numbers shown represent
typical results obtained:
Isotope
%Efficiency
C
5%
Tc
12 %
Cs
24 %
90
Sr
59 %
36
Cl
26 %
Am
8%
14
99
137
241
Note: The efficiency
formula used to calculate
the %Efficiency is:
Eff. % = (CPM x 100)/DPM
I
2%
230
Th
15 %
239
Pu
12 %
129
990-IR-USB USB Port IrDA
Adapter
990CC Carrying Case
990WM Wall Mounting Bracket
990PH Probe Holder for
489-110D
990UPH Universal Probe Holder
990SH Soft-Sided Holster
990SA Shoulder Strap Assembly
Note: The shoulder strap assembly
is only available for the ASM-993
and must be ordered with the
instrument and factory installed.
Note: The ASM-990 Series, with
the customer-selected probe is
calibrated to NIST standards. The
ASM-990 series with GM probe
standard calibration is in R, Sv, and
rems. Scintillation detectors are
calibrated in counts. Radionuclidespecific efficiency calibrations are
available upon request. For probe
selection and calibration services,
see next page.
Due to recent international airline
shipping policies/restrictions,
radioactive “Check Source” will
not be shipped with the main unit
outside US.
Typical energy dependence
Internal pancake detector
5
4.5
4
Indicated/Actual
3.5
3
2.5
2
1.5
Ordering information
1
0.5
0
100
10
1000
125
137
Cs
10000
60
Co
Energy (keV)
Model comparison
Model
Advanced survey
meter
990
•
990BC
•
992
•
992BC
•
993
•
993BC
•
Radiation Safety Products
Barcode reader
Internal energy
compensated
1 R/hr GM detector
Internal pancake
detector
•
990 Advanced Survey Meter
990BC Advanced Survey Meter
with barcode reader
992 Advanced Survey Meter with
an internal 1 R GM detector
992BC Advanced Survey Meter
with an internal 1 R GM detector
and barcode reader
993 Advanced Survey Meter with
an internal 1 R GM detector and
internal pancake detector
993BC Advanced Survey Meter
with an internal 1 R GM detector,
internal pancake detector, and
barcode reader
•
•
•
•
•
•
•
•
45
05-437
PRIMALERT® 35 Area
Radiation Monitor
The PRIMALERT 35 Area Radiation Monitor contains an energy-compensated GM detector and has
six range indicators (1, 2, 4, 8, 16, and 32 mR/hr)
that can clearly display an increase or decrease
in radiation levels. The visible and audible alarms
can be set at any of the six levels by a front-panel,
screwdriver-adjustable control. When each preset
radiation level is exceeded, personnel are alerted
by bright flashing red lights (visible over a 180°
field) and a loud intermittent audio signal. The
alarms stop automatically when the radiation level
falls below each of the preset values. This permits
instant radiation-level recognition not readily distinguishable on meter-type instruments.
Fail-safe operation is assured by a light which continuously
indicates background radiation and provides visual proof that
the unit is functioning. The monitor will not jam or show false
readings in high radiation fields. A mounting bracket and a
110 V ac adapter/power converter are also included.
Key features
•Provides continuous visual
indication of radiation levels
and produces audible and/
or visual alarms at any of six
programmable radiation levels
•Assures reliable, continuous
monitoring wherever radioactive materials are present
•Displays the radiation level in
bright color-coded lights
•Optional Primalarm Remote
Alarm, which functions up to
100 feet from monitor
Specifications
Power requirements
105 V to 125 V/60 Hz/8 W
Dimensions (WxHxT)
9 cm x 15 cm x 4 cm (3.5 in x 6 in x 1.5 in)
Weight
0.9 kg (2 lb)
Optional accessories
62-103 Check Source, 137Cs,
10 µCi. Flat disc, 1 in diameter
Included accessories
AC adapters, specify with order
14-314 110 V ac 12 V dc
500 mA (USA, Japan)
14-400 230 V ac 12 V dc
500 mA (Europe)
14-417 230 V ac 12 V dc
580 mA (UK)
14-436 230 V ac 12 V dc
580 mA (Australia)
Ordering information
05-437 Primalert 35 Area
Radiation Monitor
46
Radiation Safety Products
7600
Double Check® Pro
Daily Check Device
Key features
•Daily check device including
10 air-vented ion chambers
The 7600 Double Check Pro is a
portable, easy-to-use daily check
device for therapy beam quality
assurance. Ten ion chambers are
positioned to simultaneously check
beam constancy, symmetry, flatness, and energy constancy. Nine
ion chambers are used for verification of flatness, symmetry, and dose
constancy while a special filtered
ion chamber provides energy constancy information. A brightly-colored LCD touch-screen display
and intuitive user interface make the unit easy to use. Internal and
external Flash memory along with several different computer interfaces allow flexible measurement storage, comparison and archival
record keeping.
The Double Check Pro consists of a detector array and software
for performing linear accelerator quality assurance using physicistpreferred air ion chamber technology for dose measurement, avoiding
the radiation damage issues of diode detectors. Windows® CE based
software acquires beam profile data from the detector array. The beam
profile is displayed numerically or graphically. Beam profile analysis
such as flatness and symmetry is performed and saved in a database
resident on the unit, facilitating daily, weekly, yearly checks to follow
the guidelines in TG-40. The data is also available for correlation to
TG-51 data.
Specifications
Display
Dot pixels
320 x 3 [RGB] (w) x 240
Dot size (WxH)
0.10 mm x 0.34 mm
Dot pitch (WxH)
0.12 mm x 0.36 mm
Viewing area (WxH)
122.0 mm x 92.0 mm
LCD type
F-STN/color-mode/transmissive
Backlight
Cold cathode fluorescent lamp
Detector
Material
Acrylic
Standard field size
20 cm x 20 cm or 10 cm x 10 cm
External chamber cavity
Side cavity provided for farmer-type ion chamber (0.6 cc), allowing
central axis calibration
Ion chamber buildup
(all chambers)
5 mm acrylic, 0.28 mm polycarbonate; 0.8 mm polyethylene
Ion chambers
Ten air vented
Ion chamber configuration
One central axis; four 4 cm off-axis; four 8 cm off-axis; energy
constancy chamber for external filters @ 9 cm off-axis
Ion chamber nominal bias
voltage
300 V dc
Ion chamber diameter/volume 1.27 cm/0.65 cc
System
Dose range
50 to 1000 rad/min; 0.50 Gy to 10 Gy/min
Beam type energy
Photons: 2 mV to 25 mV
Electrons: 2 MeV to 25 MeV
Operating temperature
Minimum 10 ºC, maximum 40 ºC
Dimensions (wxdxh)
23 cm x 47.9 cm x 5.8 cm (9 in x 18.9 in x 2.3 in)
Weight
2.88 kg (6.34 lb)
Radiation Oncology Products
•Efficient workload planning
•Wireless state-of-the-art
communications (optional—
wireless feature not available
with Argus Argus software
does not support wireless
communications with the
Double Check Pro)
•Limitless data storage
•User-friendly interface
•Thorough data analysis
•Automatic atmospheric beam
corrections
•Flexible weekly scheduling
•User created protocols
•Tabular or graphical data
presentation
•Large, bright, easy-to-use
color touch screen
Optional accessories
7600KBD Compact Keyboard,
USB
7600CAB 23 m (75 ft)
Communications Cable includes
ethernet crossover RJ-45
7600WCF Wireless Compact
Flash Card, 802.11b
7600CFM Compact Flash
Memory Card, 256 MB
7600WR Wireless Router,
802.11b
7600WLS Victoreen Double
Check Pro Wireless Kit. Includes
Wireless Compact Flash Card,
802.11b; Wireless Router,
802.11b; and 23 m (75 ft)
Communications Cable
Included accessories
7600USB USB Cable, 6 ft
7200-50 Stainless Steel Filter
Set: 0.46, 0.61, 0.76, 0.91, 1.5,
1.9, 3.0, 3.6, 5.0, 10, 15, 30 mm
171063 Buildup Plates, 1 cm,
3 each
7600AC Universal 6 V dc ac
Adapter
Ordering information
7600 Double Check Pro Daily
Check Device
47
7020 and 7040
THEBES® II Therapy
Beam Evaluation System
Key features
•Linear array of 47
air ion chambers
The THEBES II* (THErapy Beam
Evaluation System) consists
of a linear ion chamber array,
electrometer, communicator,
THEBES II Contour Manager
software, wall mount power
supply, interconnecting cable,
and carrying case. An acrylic
base plate that holds the ion
chamber array and build up
plates are also provided. The
linear ion chamber array is
permanently connected to
the electrometer by a 1.5 m
shielded multiconductor
cable to eliminate radiation
damage to the electrometer.
The THEBES II linear ion
chamber array is a waterproof,
linear array of 47 ion chambers on 0.5 cm centers. The total
active length of the array is 23.42 cm. The THEBES II communicator provides power and the communication interface for the
THEBES II electrometer. THEBES II Contour Manager Software is a
Windows based application that acquires beam contour data from
the detector array and displays it graphically.
The THEBES II is used to perform linear accelerator quality
assurance using physicist-preferred air ion chamber technology
for dose measurement, avoiding the ion transport issue of the
competing liquid chamber technology and radiation damage
issues of diode detectors. The detector array consists of 47 waterproof air ion chambers in a linear array. Two detector arrays
are being offered: 7020 with 47 ion chambers on a 0.5 cm pitch
(23.42 cm total active length) and 7040 with 47 ion chambers
on a 1 cm pitch (46.88 cm total active length). The software
performs beam contour analysis such as flatness and symmetry.
Beam contour data is saved in an Access compatible database,
facilitating daily, weekly, and yearly checks, aiding in following
the guidelines in TG-40 and TG-51.
•0.5 cm spacing for 7020
•1.0 cm spacing for 7040
•Central axis chamber
•Waterproof and vented
•Simultaneously checks
symmetry, flatness, light
field vs. radiation field
coincidence, field size,
beam center, penumbra,
constancy, and integrated
•Real-time dose maps for
service and setup
•No electronics in or
near the beam
•Windows® applications
software
*US Patent No. 6,885,007.
60 degree dynamic wedge
48
Radiation Oncology Products
7020 and 7040
THEBES® II Therapy
Beam Evaluation System
Optional accessories
Specifications
Linear ion chamber array
Detector type
Number of detectors
Dimensions (wxdxh)
Active area
Detector spacing
Inherent buildup
Inherent backscatter
Radiation detected
Beam limits
Ion chamber dimensions
(wxdxh)
Ion chamber nominal volume
Ion chamber alignment
Nominal bias voltage
Weight
Ionization chambers, waterproof and vented
47
7020: 6.2 cm x 30.2 cm x 3.7 cm
7040: 6.2 cm x 53.5 cm x 3.7 cm
7020: 1.0 cm x 23.42 cm (23 cm center to center)
7040: 0.88 cm x 46.88 cm (46 cm center to center)
7020: 0.5 cm
7040: 1.0 cm
0.5 cm polystyrene, .02 cm polycarbonate
Without mounting plate: 0.3 cm acrylic
With mounting plate: 0.3 cm acrylic, 1.0 cm acrylic
Photons: 60Co to 25 MV
Electrons: 6 to 25 MeV
Maximum dose/pulse: 12.5 mGy per pulse
Maximum pulse rate: 1000 pulses per second
Maximum continuous dose rate: 500 cGy/min
7020: 0.42 cm x 0.95 cm x 0.50 cm
7040: 0.88 cm x 0.88 cm x 0.50 cm
7020: 0.17 cm3
7040: 0.36 cm3
± 0.3 mm chamber outline on top of array in all axes
-300 V
0.34 kg (0.75 lb)
Electrometer
Number of channels
Amplifiers
Array scan time
Frame rate
Status indicators
Dimensions (wxdxh)
Communicator
Computer interface
Power requirements
Communication interface
Dimensions (wxdxh)
48
Non-multiplexed, low leakage, mosfet operational amplifier
1.1 ms
5 frames/sec
4
10.9 cm x 21.6 cm x 3.2 cm
RS-232, DB-9 connector
12 V dc, 1 A
Connector: RJ-45
Baud rate: 57.6 K
4.2 cm x 8.8 cm x 2 cm
System
Power requirements
Computer requirements
Operating system
Hard disk space
Mounting plate dimensions
(wxdxt)
Calibration
Environmental
Weight
Radiation Oncology Products
Input: 120 V ac, 60 Hz, 22 W
Output: 12 V dc, 1 A
Computer IBM® compatible PC, Intel® Pentium® 90 or higher
with at least one unused COM port
Microsoft Windows XP®, 2000
64 MB of available space
7020: 22.8 cm x 30.5 cm x 2.5 cm
7040: 22.8 cm x 53.8 cm x 2.5 cm
Accuracy: 2 %
Reproducibility: 1 %
Long term stability: 1 %
Linearity: 1 %
Operating temperature: 10 °C to 40 °C (50 ºF to 104 ºF)
Storage temperature: -25 °C to +65 °C (-13 ºF to +149 ºF)
Relative humidity: 20 % to 75 %, non-condensing
10 kg (21 lb)
57-051 Lead Foil for TG-51,
1 mm x 20 cm2
7020
7020BP95 9.5 cm Buildup Plates
7020AA ARM 3D Watertank
Adapter
7020MA Multidata Watertank
Adapter
7020WDA Wellhöfer (Dovetail)
Watertank Adapter
7020WPA Wellhöfer Blue (Pin)
Watertank Adapter
7020VA Tray Adapter Kit, Varian
Type 3
7020EA Tray Adapter Kit, Elekta
7020SA Tray Adapter Kit,
Siemens
7040
7040BP95 9.5 cm Buildup Plates
7040VA Tray Adapter Kit,
Varian Type 3
7040EA Tray Adapter Kit, Elekta
7040SA Tray Adapter Kit, Siemens
Included accessories
AC adapters, specify with order
14-328 110 V ac 12 V dc
1000 mA USA, Japan
14-401 230 V ac 12 V dc
1000 mA, Europe
14-414 230 V ac 12 V dc
1000 mA, UK
14-414 and 14-416 adapter
230 V ac 12 V dc 1000 mA,
Australia
7020
7020CBL Communication Cable,
23 m (75 ft)
7020TER Terminator, 120
7020COM Communicator
7020BP10 1 cm Buildup Plate
7020BP25 2.5 cm Buildup Plate
7040
7040CBL Communication Cable,
23 m (75 ft)
7040TER Terminator, 120
7040COM Communicator
7040BP10 1 cm Buildup Plate
7040BP25 2.5 cm Buildup Plate
Ordering information
7020 THEBES II 20 cm Field
Size Array
7040 THEBES II 40 cm Field
Size Array
49
35040
Advanced Therapy
Dosimeter
Optional accessories
Specifications
Charge full scale
Charge sensitivity
Current* full scale
Current* sensitivity
200.00 pC
0.01 pC
200.0 pA
0.1 pA
2.0000 nC
0.0001 nC
2.000 nA
0.001 nA
20.000 nC
0.001 nC
20.00 nA
0.01 nA
200.00 nC
0.01 nC
200.0 nA
0.1 nA
2.0000 µC
0.0001 µC
1.000 µA
0.001 µA
20.000 µC
0.001 µC
200.00 µC
0.01 µC
2.0000 mC
0.0001 mC
20.000 mC
0.001 mC
*Average current is displayed with ten times greater resolution.
86120 Extension Cable, 20 ft,
Triax BNC to BNC
30-356 BNC to TNC Converter
External chamber accessories
30-344 Semiflex™ Ionization
Chamber, 0.125 cm3, Waterproof
30-316 Semiflex™ Ionization
Chamber, 0.3 cm3, Waterproof
30-353 PinPoint™ Ionization
Chamber, 0.015 cm3, Waterproof
30-332 Roos™ Electron
Ionization Chamber, 0.35 cm3,
Waterproof
30-353 Advanced Markus™
Electron Ionization Chamber,
0.02 cm3, Waterproof
Effective exposure time ranges
Full scale range
Display resolution
59.99 s
0.01 s
5 hr 33 min 19.9 s
0.1 s
Stability
Designed for ultra long-term stability error of approximately
0.1 % per five years
Leakage
Virtually removes effects of total system leakage during
measurement. Uncorrected leakage < 10 fA over temperature
range
Linearity
Maximum non-linearity variation from straight line of 0.1 % of
all charge and current ranges
Resolution
0.005 % of range (4.5 digits) for charge, dose, average rate and
average current; 0.05 % of range (3.5 digits) for current and rate
Warm-up
Fully meets specifications within five minutes of applying power
Measurement accuracy
18 °C to 28 °C (64 ºF to 82 ºF); charge ± (0.20 % reading plus
two counts); current ± (0.20 % reading plus two counts)
Bias
Eleven user-programmable steps from -500 to +500 V in
0.1 volt increments; accuracy ± 0.3 V for loads < 0.2 mA;
front panel selectable
Ion chamber calibration
factors
Thirty-two user-programmable calibration factors; front panel
selectable
Display units
All practical radiation and electrical units
RS-232 computer
configuration
For customizing and data transfer
Power requirements
Internal lead acid battery; integral charger operates
100 V ac to 240 V ac (47 Hz to 63 Hz)
Connectors
Triax BNC front/rear 35040; Triax TNC front/rear 35040TNC
Dimensions (wxdxh)
21.6 cm x 26 cm x 8.9 cm (9.4 in x 10 in x 4 in)
Weight
4.6 kg (10 lb)
Ordering information
35040 Advanced Therapy
Dosimeter
35040TNC Advanced Therapy
Dosimeter, TNC option
50
Radiation Oncology Products
Service and Calibration
World-class facility. World-class service.
Fluke Biomedical’s Global
Calibration Lab is NVLAP Lab Code
200566-0 accredited, adheres
to ISO 17025:2005, ANSI Z540,
Mammography MQSA, and CNSC, and
is traceable to national and international standards.
Fluke Biomedical offers one-stop,
bulk contracts for managing larger
instrument pools, including various
asset-management
alternatives for pools larger than
150 units. Fluke Biomedical’s assetmanagement program takes over your
grueling task of
instrument tracking and allows you to
use your time more
productively.
If you have a large number of
instruments that require service, you
can greatly benefit from this quality service. Proper protocols are strictly followed, eliminating the problems with inspectors and audits that can result when
other less-qualified labs perform the calibrations. Instrumentation includes Fluke
Biomedical as well as other industry models.
Calibration Beam Specifications
Fluke Biomedical’s Global
Calibration Laboratory is
equipped to calibrate and
repair the following types of
instruments:
•Area Monitors
•Barometers
•Blood Pressure Simulators
•Defibrillators/External Pace
Maker Analyzers
•Densitometers
•Diode Detectors
•Dosimeters
•Electrical Safety Analyzers
•Incubator Analyzers
•Ion Chambers
•IV Pump Analyzers
•kVp Meters
•mAs Meters
•Electrical Multimeters
•Oscilloscopes
•Patient Simulators
•Pressure Meters/Parameter
Testers
•Radiation Multimeters
•Sensitometers
•SpO2 Simulators/Analyzers
•Thermometers
•Test Lungs
•Ultra Sound Analyzers
•Velometers
•Ventilators/Gas flow
Analyzers
Tungsten Anode
PTB-Traceable Techinques
NIST-Traceable Techniques
Equivalent
Beam Code
Potential
(kV)
Filtration
mm
Al
mm
Cu
mm
Sn
mm
Pb
HVL
mm
Al
Equivalent
Beam Code
Potential
(kV)
Filtration
mm
Al
mm
Cu
mm
Sn
mm
Pb
HVL
mm
Al
L20
20
0.07
DV30
30
2.5
0.98
L100
100
1.98
2.75
DV40
40
2.5
1.44
M30
30
0.50
0.33
DV50
50
2.5
1.81
M50
50
1.00
0.98
DV60
60
2.5
2.13
M60
60
1.50
1.68
DV70
70
2.5
2.45
M80
80
2.6
2.98
DV80
80
2.5
2.78
M100
100
5.0
5.1
DV90
90
2.5
3.1
M150
150
5.0
0.25
10.2
DV100
100
2.5
3.48
M200
200
4.1
1.12
14.9
DV120
120
2.5
4.15
M250
250
5.0
3.2
18.5
DV150
150
2.5
5.36
H50
50
4.0
4.4
DH40
40
4
2.2
H60
60
4.0
6
DH50
50
10
3.75
0.12
0.6
H100
100
4.0
5
H150
150
4.0
4
1.5
H200
200
4
0.6
4
H250
250
4
0.6
1
Service and Calibration
13.5
DH60
60
16
5.35
16.8
DH70
70
21
6.77
0.7
19.5
DH80
80
26.0
8.12
2.7
21.5
DH90
90
30.0
9.26
DH100
100
34.0
10.15
DH120
120
40.0
11.67
DH150
150
45.0
13.36
51
Service and Calibration
World-class facility. World-class service.
Calibration Beam Specifications
Molybdenum/Rhodium Anode
NIST-Traceable Techniques
Filtration
Equivalent
Beam Code
Potential
(kV)
mm Mo
Mo/Mo 28
28
0.032
0.33
Mo/Mo 35
35
0.032
0.39
Mo/Rh 28
28
0.029
Rh/Rh 25
25
Rh/Rh 40
40
Mo/Mo28x
28
Rh/Rh/35x
35
mm Rh
mm Al
HVL
mm Al
0.41
0.029
0.35
0.029
0.030
0.029
0.56
2
0.63
2
0.898
mm Al
HVL
mm Al
PTB-Traceable Techinques
Filtration
Equivalent
Beam Code
Potential
(kV)
mm Mo
MV20
20
0.030
0.223
MV25
25
0.030
0.282
MV30
30
0.030
0.337
MV35
35
0.030
0.374
MV40
40
0.030
0.402
MV50
50
0.030
MV20
20
0.030
2
0.450
MV25
25
0.030
2
0.580
MV30
30
0.030
2
0.670
MV35
35
0.030
2
0.749
MV40
40
0.030
2
0.825
MV50
50
0.030
2
0.968
mm Rh
0.440
Service Center/Repair/Calibration US
Fluke Biomedical
6045 Cochran Road
Cleveland OH 44139-3303
Tel: 440-498-2560
Toll free: 800-850-4608 ext 2564
Email: [email protected]
Service Center/Repair/Calibration Europe
Fluke Biomedical Europe
Science Park Eindhoven 5110
5692EC Son, The Netherlands
Tel: +31 (40) 267 5435
Fax: +31 (40) 267 5436
Email: [email protected]
www.flukebiomedical.com/service
52
Service and Calibration
Biomedical Test
CD-ROM Catalog
Table of Contents
For comprehensive information about the complete line of Biomedical Test products
and services, view the entire product selection on the attached CD-ROM.
Defibrillator/Transcutaneous Paceer Analyzers Controller
Impulse 6000D/7000DP Defibrillator/Transcutaneous
Pacemaker Analyzer.................................................................... 4
QED 6 Defibrillator Analyzer..................................................... 8
HHC3 Hand Held Controller.....................................................48
Pacemaker Analyzer
Pulse Oximeter Simulator
SigmaPace 1000 External Pacemaker Analyzer................ 10
Electrosurgery Analyzers
QA-ES Series II Electrosurgery Analyzer............................. 12
RF303RS Electrosurgery Analyzer.......................................... 14
Infusion Devise Analyzer
IDA 4 Plus Infusion Devise Analyzer.................................... 16
Electrical Safety Analyzers
ESA620 Electrical Safety Analyzer........................................ 18
ESA612 Electrical Safety Analyzer........................................20
ESA601 Electrical Safety Analyzer........................................22
601 Pro SeriesXL Electrical Safety Analyzer........................24
QA-90 MKII Electrical Safety Analyzer.................................26
180 Electrical Safety Analyzer...............................................28
175 Electrical Safety Analyzer................................................29
LT544DLITE Digital Safety Tester..........................................30
LT544DPLUS Digital Safety Tester......................................... 31
Fetal Simulator
PS320 Fetal Simulator..............................................................49
Index 2 Patient Oximeter Simulator....................................... 51
Gas Flow Analyzers
ACCU LUNG Portable Precision Test Lung............................52
VT MOBILE Portable Gas Flow Analyzer..............................53
VT PLUS HF Gas Flow Analyzer.............................................55
Pressure Meters
DPM4 Parameter Tester............................................................57
DPM1B Pneumatic Transducer Tester....................................59
DPM2Plus Pressure Tester.......................................................60
Automation Solutions
Ansur Test Automation Software........................................... 61
medTester 5000C Automated Biomedical
Equipment Test System............................................................63
Incubator Analyzer
INCU Incubator Analyzer..........................................................65
Ultrasound Transducer Leakage Tester
Oxygen Analyzer
Non-Invasive Blood Pressure Simulator
Service and Calibration
ULT800 Ultrasound Transducer Leakage Tester.................32
BP Pump 2 Non-Invasive Blood Pressure Simulator..........33
CuffLink Non-Invasive Blood Pressure Simulator..............35
max02 PLUS AE Oxygen Analyzer.........................................66
Service and Calibration Info................................................67
Patient Simulators
MPS450 Patient Simulator.......................................................37
medSim 300B Patient Simulator............................................39
PS420 Patient Simulator.......................................................... 41
PS415 Patient Simulator...........................................................44
PS410 Patient Simulator...........................................................45
PS400 Patient Simulator..........................................................46
DataSim 6100 Patient Simulator............................................ 47
Featured Products Catalog
53
Diagnostic Imaging
CD-ROM Catalog
Table of Contents
For comprehensive information about the complete line of Biomedical Test products
and services, view the entire product selection on the attached CD-ROM.
Diagnostic X-Ray Quality Assurance Instruments
TNT 12000 X-Ray Test Device...............................................................3
35080M/199XRAY Non-Invasive kVp Divider and Medical
Scopemeter.................................................................................................6
10100AT, 10500AT, and 10500AMT TRIAD™ TnT X-Ray Field
Service/Calibration/QA Kit......................................................................9
10500EXL TRIAD Toolkit for Excel..................................................... 15
8000 NERO® mAx X-Ray Test Device.................................................17
8000mAx NERO mAx Toolkit for Excel .............................................21
4000M+ X-Ray Test Device................................................................. 23
4000EXL 4000 Toolkit for Excel......................................................... 25
10970 Crescent X-Ray Leakage Detection System ....................... 27
07-CRXW and 07-QRX Wireless CR RADCHEX and
QA RADCHEX........................................................................................... 29
07-MAS5 mAs-5 Meter......................................................................... 31
660 X-Ray and CT Exposure Measurement Instrument................. 32
06-526 RAD-CHECK® Plus Dosimeter .............................................. 34
06-526-5240 RAD-CHECK MICRO-R................................................ 35
07-494/07-492/07-479 Wide-Range, Mammographic, and
Dental kVp Meters . ............................................................................... 36
18-526 Series Service and Quality Control Kits............................. 37
07-453 Digital X-Ray Pulse Counter/Timer..................................... 38
07-487 Dual-Range Digital mAs Meter............................................. 39
07-469 Wave Precision High-Voltage Divider ................................ 40
18-116 VeriLUM® Color Dual Mode Pod.............................................41
07-621 Precision Photometer ............................................................ 42
07-661-7662 Collimator/Beam Alignment Test Tool ................... 43
07-644 Grid Alignment Test Tool ..................................................... 43
07-591 Focal Spot Test Tool................................................................ 44
07-501 to 07-555 Test Patterns........................................................ 45
07-503 to 07-551 Star Patterns......................................................... 46
07-456 High-Purity Aluminum Step Wedges.................................. 46
07-450 PACS Test Patterns in Digital Format.................................. 47
07-451 X-Ray Output Detector .......................................................... 48
07-608 Screen/Film Contact Mesh ................................................... 48
07-706 Patient Phantom/Penetrometer System.............................. 48
07-894 Computer Monitor Tester ...................................................... 49
07-622 Multipurpose Focal Spot/HVL Test Stand.......................... 50
07-623 Mammography Focal Spot Measurement Test Stand ..... 50
07-533 Radiopaque Rulers.................................................................. 50
07-611 to 07-633 X-Ray Pinhole Assemblies................................ 51
07-620/07-635 High-Quality Comparators..................................... 51
Radiography/Fluoroscopy Phantoms and Acc.
57-4 Series CLEAR-Pb® Compensation Filters................................ 52
07-600QC/07-600QCN Quality Control Kit . .................................... 55
07-680 NEMA® Cardiology/Fluoroscopy Phantom ........................ 56
07-649 CDRH Fluoroscopic Phantom................................................. 60
07-601 Fluoroscopic System Resolution Test Tools ...................... 61
07-800 Series Flex Film Cassettes .................................................. 61
07-600 Fluoroscopic Beam Alignment Device ............................... 62
07-678+ DXR Direct X-Ray Ruler ..................................................... 62
76-710 Digital Subtraction Angiography (DSA) Phantom ........... 63
07-652 CDRAD Contrast Detail Digital and Conventional
Radiography Phantom........................................................................... 65
07-605-7777 CR/DR DIN Test Tool .................................................. 67
07-647 R/F QC Phantom ..................................................................... 68
07-643 Contrast Imaging Phantom.................................................... 69
07-653 Fluoroscopic Imaging Test Phantom .................................. 70
76-2 Series Diagnostic X-Ray Phantoms ........................................ 71
76-025 CDRH Dental Image Quality Test Tool................................ 73
76-606DX ATOM MAX Diagnostic Head Phantom ......................... 75
07-656 Cardiac Digital Imaging/Cine-Video Quality Control
Phantom and Patient Identifier............................................................ 76
07-434 Ultra-High Purity HVL Attenuators .................................... 76
07-645 Fluoro-Test ™ Tool.................................................................... 77
54
Featured Products Catalog
07-101-2000 RADCOMP X-Ray Entrance Skin Exposure
Software................................................................................................... 78
07-638 Fluoro Contrast Test Disks .................................................. .79
07-614-8080 Adult Cine Attenuator................................................. 79
Film Processor Quality Assurance
07-444
07-443
07-417
07-402
07-424
“The Little Genius” Scanning Densitometer...................... 80
Handheld Deluxe Digital Clamshell Densitometer........... 81
Handheld Dual-Color Sensitometer ................................... 82
Portable Digital Thermometer............................................... 83
Digital Densitometer............................................................... 84
Film Handling and Storage
77-201TR/TS MAXANT TECHLINE Illuminators............................. 85
77-101HL MAXANT High Intenstiy Hot Lamp................................. 88
77-201VR/VS MAXANT MVP Illuminators....................................... 89
18-231-2350 Fixer Retention QC Test Kit for Radiographic Film.91
Mammography Quality Assurance
18-220 Mammographic Accreditation Phantom............................. 92
18-250 Digital Stereotactic Breast Biopsy
Accreditation Phantom.......................................................................... 93
18-251-2000 Contrast and Resolution Mammography Phantom.94
18-252 Contrast Detail Phantom for Mammography .................... 95
18-227 CDMAM Phantom..................................................................... 96
18-222 Tissue-Equivalent Mammography Phantom .................... 98
18-216 Single-Exposure High Contrast Resolution Phantom...... 99
18-228 Stereotactic Needle Biopsy Tissue-Equivalent
Training Phantom.................................................................................100
18-229-1313 Mammo-Cube Stereotactic Core
Biopsy Phantom....................................................................................100
18-229 Triple-Modality Biopsy Training Phantom...................... 101
18-230 Series GRID-VIEW™ Breast Biopsy Transport and
Imaging System.................................................................................... 102
18-203 Mammography Phototimer Consistency Test Tool .......103
18-224 Mammography Phantom Material ....................................103
18-303 Mammography Collimation Assessment Test Tool .......104
18-210-8000 View Markers for Mammography ......................... 105
CT Quality Assurance
76-410-4130 AAPM CT Performance Phantom............................106
76-409 Spiral/Helical CT Lesion Detectability Phantom............. 108
76-424-4156 Nested CT Dose Phantom Kit for
Pediatric/Adult Head and Body . ......................................................109
76-419-4150 CT Dose Phantom Kit for Pediatric/Adult
Head and Body......................................................................................109
76-414-4150 CT Dose Phantom Kit for Adult Head and Body..109
CT Ion Chambers ................................................................................ 110
76-430 Mini CT QC Phantom ............................................................111
76-432 CT Spiral Phantom................................................................ 112
84-357 Interventional Triple-Modality 3D
Abdominal Phantom............................................................................ 113
MRI Quality Assurance
76-907 MR Uniformity/Linearity Phantom (AAPM).......................114
76-908 MR 3D Slice Thickness/High Contrast
Resolution Phantom (AAPM) ..............................................................114
76-904 MRI Surface Coil Phantom....................................................115
76-903 MRI Multipurpose Phantom ................................................117
Ultrasound Quality Assurance
84-555 Ultrasound Phantoms Set for 2D and 3D Evaluation ... 119
84-347 Gray Scale Ultrasound Phantom......................................... 121
84-349 Ultrasound Elasticity QA Phantom..................................... 122
84-317 Multipurpose Tissue/Cyst Ultrasound Phantom............. 123
84-340 General Purpose Multi-Tissue Ultrasound Phantom .... 124
84-342 General Purpose Urethane Ultrasound Phantom............ 125
Service and Calibration
Service and Calibration Info..............................................126
Radiation Safety and
Oncology CD-ROM Catalogs
Table of Contents
For comprehensive information about the complete line of Biomedical Test products
and services, view the entire product selection on the attached CD-ROM.
Radiation Safety Catalog
Radiation Oncology Catalog
Ion Chamber Survey Meters
Linear Accelerator Quality Assurance
Instruments
451B Ion Chamber Survey Meter with Beta Slide................ 4
451P Pressurized μR Ion Chamber Survey Meter................. 6
451EXL 451 Assistant for Excel................................................ 8
440RF/D Low Energy RF Shielded Survey Meter................. 9
Other Survey Meters and Probes
ASM-990 Series Advanced Survey Meter........................... 10
489-200WTF Wipe Test Fixture for Advanced Survey
Meter............................................................................................ 13
489-110D GM Pancake Probe................................................. 14
Geiger-Mueller and Scintillation Probe
Selection Guide........................................................................ 15
190N Portable Neutron Survey Meter.................................... 18
Area Monitors
190F Area Monitor/Frisker Count Rate Meter...................... 19
1060AM Digital Smart Detector Area Monitor.....................20
05-437 PRIMALERT® 35 Area Radiation Monitor.............. 21
05-443/444 PRIMALERT Digital Area Monitors.................22
05-450 PRIMALERT Digital Doorway Monitor....................23
Personal Dosimetry
05-106 Bleeper mR Radiation Monitor.................................24
06-007 Direct Reading Pocket Dosimeters..........................25
Service and Calibration
Service and Calibration Info................................................27
7600 Double Check® Pro Daily Check Device........................ 4
35040 Advanced Therapy Dosimeter...................................... 5
7020/7040 THEBES® II Therapy Beam
Evaluation System....................................................................... 7
7020SW THEBES® II Level II Software
(Contour Manager Version 2.0)................................................. 9
37-705 VeriDose® PDMQC System......................................... 11
30-471 VeriDose® Solid-State Diode Detectors................... 12
37-720 Dual-Diode Dosimeter Patient Dose Monitor.......... 13
37-105 mobileMOSFET Wireless Dose
Verification System.................................................................... 14
05-433 PRIMALERT® 10 Teletherapy
Radiation Monitor...................................................................... 16
37-731 Precision Isocentric QC Beam-Checker II............... 17
37-001 TEL-ALIGN™ Teletherapy Alignment Gauge.......... 18
37-013 GARD™ Geometric Accuracy
Radiotherapy Device................................................................. 19
Radiation Oncology Chambers
30-331 Advanced Markus™ Electron Ionization
Chamber, 0.02 cm3, waterproof..............................................20
30-351 Farmer-Type Ionization Chamber, 0.6 cm3,
waterproof................................................................................... 21
30-344 Semiflex™ Ionization Chamber, 0.125 cm3,
waterproof...................................................................................23
30-316 Semiflex™ Ionization Chamber, 0.3 cm3,
waterproof...................................................................................25
30-353 PinPoint™ Ionization Chamber, 0.015 cm3,
waterproof...................................................................................27
30-332 Roos™ Electron Ionization Chamber,
0.35 cm3, waterproof................................................................29
30-329 Markus™ Electron Ionization Chamber,
0.055 cm3, waterproof.............................................................. 31
30-355 Extension Cable Reel for Ionization Chambers....33
Phantoms and Accessories
74-6 Series Plastic Water™....................................................34
74-0 Series IMRT Phantoms: Thorax, Homogeneous,
Advanced Pelvic 3D, and Head and Neck ...........................35
76-417 CT Simulation Phantom.............................................40
76-462 Electron Density Phantom........................................ 41
37-020 Oakton® Temperature Compensated Barometers.42
07-405 NIST Traceable Digital Thermometer.....................42
Service and Calibration
Service and Calibration Info................................................43
Featured Products Catalog
55
Publications
For a complete listing of Fluke Biomedical
products and services, please view our four
digital catalogs on the attached CD-ROM.
Your authorized Fluke Biomedical distributor
Fluke Biomedical Test
The Biomedical Test catalog emphasizes the complete line of
biomedical test and simulation products for Biomedical/Clinical Engineers and Technicians. The catalog contains information
about Fluke Biomedical’s test and simulation products, including standalone electrical safety testers, patient simulators, and
performance analyzers, as well as fully integrated and automated
performance-testing and documentation systems.
riešenia na presné meranie™
Elso Philips Service; tel: +421 32 6582410
email: [email protected]; web: www.elso.sk
For more information, contact [email protected]
Fluke Biomedical Diagnostic Imaging QA
The Diagnostic Imaging QA catalog is a comprehensive source
book of solutions for the Imaging QA Technologist, Physicist,
Biomedical/Clinical Engineer, or Service Engineer. The catalog
contains information about the test devices, phantoms, and
accessories needed to manage diagnostic imaging QA and
maintain regulatory-compliance.
For more information, contact [email protected]
Fluke Biomedical Radiation Safety
The Radiation Safety catalog highlights devices used to measure
radiation levels, manage regulatory QA requirements, and aide in
radiation emergencies. These devices are intended for Radiation
Safety Officers (RSOs), Health Physicists, Emergency Responders
and other radiation-minded professionals. The catalog contains
information about a variety of survey meters and probes, area
monitors, and other radiation-monitoring accessories.
For more information, contact [email protected]
Fluke Biomedical.
Better products. More choices. One company.
Fluke Biomedical Radiation Oncology QA
The Fluke The Radiation Oncology QA catalog provides a full
range of QA solutions for the Radiation Oncology Physicist,
Therapist, and Dosimetrist. The catalog contains information
about the linear accelerator QA instruments, radiation oncology chambers, phantoms, and accessories needed to manage
radiation oncology QA and maintain a safe, regulatory-compliant
facility.
For more information, contact [email protected]
Fluke Biomedical
6045 Cochran Road
Cleveland, OH 44139-3303 U.S.A.
Fluke Biomedical Europe
Science Park Eindhoven 5110
5692EC Son, The Netherlands
For more information, contact us:
In the U.S.A. (800) 850-4608 or
Fax (440) 349-2307
In Europe/M-East/Africa +31 40 267 5435 or
Fax +31 40 267 5436
From other countries +1 (440) 248-9300 or
Fax +1 (440) 349-2307
Email: [email protected]
Web access: www.flukebiomedical.com
©2009 Fluke Biomedical. Specifications subject
to change without notice. All OEM company trademarks are
implied. Printed in U.S.A. 7/2009 3500217A C-EN-N
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement