General Accessories

General Accessories
General Accessories
Balance Arms
Screwdriver balance arms
absorb torque, support weight
and improve productivity.
Cleco balance arms are engineered to deliver
longer service life using durable components,
rugged design and operator-sensitive features.
These arms absorb the torque produced by the
screwdriver, eliminating torque reaction to the
operator. Balanced by springs or air cylinders,
the arm and not the operator supports the weight
of the tool. By reducing the fatigue factors, the
operator productivity is improved.
Tool movement and placement over the fastener is
virtually effortless since most moving parts of the
balance arm are mounted on ball bearings. Access
to the tool is easily changeable by adjusting the
springs or cylinder supporting the forearm.
Arm components and materials are selected for
strength and rigidity. Precision aluminum sand
castings used in the articulating arm section are
light but sturdy.
Over 25 models of the Cleco screwdriver balance
arms are available. Air cylinder models are capable
of supporting tools weighing up to 10 lbs. (4.5 kg.).
Spring models will support tools weighing up to 5
lbs. (2.3 kg.). Both styles have torque capacities of
10 ft. lbs. (13.5 Nm). Arms can be post mounted,
wall mounted or mounted on an adjustable height
post. Tool holders for all models will accommodate
most major brands of air tools...straight and pistol.
Tool Holders
Selecting the proper tool holder for the tool used
on Cleco balance arms enhances the ergonomic
benefits of the arm. Tool holders allow the tool to
swing, swivel and rotate, enabling the operator to
work more comfortably and productively.
Standard and extended tool holders are available
for parallel balance arms. Both models hold the
tool perpendicular to the work, and are ideal for
self-tapping and thread forming applications. Tool
diameter capacity is up to 1 3/4 inch (45mm).
Manifold tool holders used on SBA and CSBA
balance arms suspend the tool from the air inlet.
They allow the tool to swing (or swivel when
equipped with the optional swivel assembly) for
ease of tool movement.
58
General Accessories
Balancers
200427
Ergonomic Tool Balancers
Capacity:
0.5 - 20.5 kg
1.0 - 45 Lbs.
PL-12A
External tension adjustment
■360° Swivel
■ Retracting in-line cable
zBL-6A
BM-13A
Model
Number
Lock Feature
Capacity
lbs.
“A”
“B”
“C”
Weight
kg
in.
mm
in.
mm
in.
mm
lbs.
kg
5.5-0.5
6.8
171
5.1
130
2.3
58
–
–
.9-0
1.8-.9
2.3-1.4
10.9
10.9
10.9
277
277
277
4.4
4.4
4.4
112
112
112
1.6
1.6
1.6
41
41
41
1.3
1.3
1.3
0.6
0.6
0.6
0.9-0.5
1.8-0.9
10.4
10.4
263
263
4.0
4.0
102
102
2.2
2.2
56
56
1.1
1.1
0.5
0.5
2.7-1.8
2.7-1.8
3.6-2.7
3.6-2.7
12.9
12.9
12.9
12.9
327
327
327
327
5.5
5.5
5.5
5.5
140
140
140
140
3.1
3.1
3.1
3.1
79
79
79
79
3.3
3.3
3.3
3.3
1.5
1.5
1.5
1.5
13.8
13.8
13.8
350
350
350
6.9
6.9
6.9
175
175
175
4.5
4.5
4.5
114
114
114
9.0
9.0
9.0
4.1
4.1
4.1
20.7
20.7
20.7
527
527
527
7.8
7.8
7.8
197
197
197
6.6
6.6
6.6
169
169
169
19
19
19
8.6
8.6
8.6
Light Duty – 4.6 ft. (1.4m) Cable Travel
PL-12A
–
12.0-1.0
Light Duty – 5.0 ft. (1.5m) Cable Travel
200427
200428
200429
–
–
–
2.0-0
4.0-2.0
5.0-3.0
Light Duty – 5.2 ft. (1.6m) Cable Travel
BL-2A
BL-4A
–
–
2.0-1.0
4.0-20
Light Duty – 6.7 ft. (2.0m) Cable Travel
BL-6A
BLL-6A
BL-8A
BLL-8A
–
Ratchet
–
Ratchet
6.0-4.0
6.0-4.0
8.0-6.0
8.0-6.0
Medium Duty – 6.6ft. (2.0m) Cable Travel
BM-13A
BML-13A
BM-18A
Automatic
Automatic/Ratchet
Automatic
13-9.0
13-9.0
18-13
5.9-4.1
5.9-4.1
8.2-5.9
Medium Duty – 6.0ft. (1.8m) Cable Travel
BM-25A
BM-35A
BM-45A
Automatic
Automatic
Automatic
25-18
35-25
45-35
11.4-8.2
15.9-11.4
20.5-15.9
59
General Accessories
Air Cylinder & Spring Balance Arms
■ Ball bearing construction
■ Supports tools weighing up to
5 lbs. (spring models) or up to
10 lbs. (air cylinder models).
Air Cylinder
Single Arm Post
cpba-18
■ Post, wall, or adjustable height
post mounting
■ Single or parallel arms
Air Cylinder
Parallel Arm
Adjustable Height
cpba-18-ah
Spring
Parallel Arm Post
pba-18
Post mounting template
Spring
Single Arm
Adjustable Height
sba-18-ah
Tools not included
60
Single Arms
Model No.
Ordering No.
Parallel Arms
Model No.
Ordering No.
Dimensions
A
B
C
D
in.
mm
in.
mm
in.
mm
in.
mm
12
12
12
12
12
12
12
305
305
305
305
305
305
305
18
24
30
12
18
30
30
457
610
762
305
457
762
762
18
18
18
-
457
457
457
-
30
30
30
-
762
762
762
-
Air Cylinder Models
CSBA18
CSBA-24
CSBA-30
CSBA-12-AH
CSBA-18-AH
CSBA-30-AH
520160
520200
520201
520165
520162
520167
CPBA-18
520170
CPBA-30
CPBA-12-AH
CPBA-18-AH
CPBA-30-AH
CPBA-30-WM
520203
520178
520172
520175
520207
Standard Equipment
Operating Instructions and Service Manual.
Regulator for Air Cylinders.
Threaded Nipples for CSBA Models
1/4 NPT Hex Nipple: 204032
1/4 NPT x 1/8 NPT Hex Reducer
Nipple: 204137
AH = Adjustable Height
WM = Wall Mounted
Tool weight capacity: 10 lbs. (4.6 kg)
Torque capacity: 10 ft. lbs. (13.5 Nm)
Single Arms
Model No.
Ordering No.
Optional Equipment
Additional accessories: See page 62.
Parallel Arms
Model No.
Ordering No.
Dimensions
A
B
C
D
in.
mm
in.
mm
in.
mm
in.
mm
12
12
12
12
12
12
12
18
12
12
305
305
305
305
305
305
305
457
305
305
12
18
24
12
18
24
30
18
12
30
305
457
610
305
457
610
762
305
305
762
18
18
18
-
457
457
457
-
30
30
30
30
30
-
762
762
762
762
762
-
Spring Models
SBA-12
SBA-18
520001
520004
SBA-12-AH
SBA-18-AH
SBA-24-AH
SBA-30-AH
520003
520006
520110
520044
SBA-30-WM
520043
AH = Adjustable Height
WM = Wall Mounted
Tool weight capacity: 5 lbs. (2.3 kg)
Torque capacity: 10 ft. lbs. (13.5 Nm)
PBA-12
PBA-18
PBA-24
PBA-12-AH
PBA-18-AH
PBA-24-AH
PBA-30-AH
PBA-18-18-AH
PBA-12-WM
520007
520010
520045
520009
520012
520047
520050
520036
520008
Standard Equipment
Operating Instructions and Service Manual.
Threaded Nipples for SBA Models
1/4 NPT Hex Nipple: 204032
1/4 NPT x 1/8 NPT Hex Reducer
Nipple: 204137
Optional Equipment
Additional accessories: See page 62.
Balance Arm Operating Envelope
R1 MAX R1 MIN R2 MAX R2 MIN H MAX H MIN
MODEL
in. mm in.mm in. mm in.mm in. mm in.mm
SBA-12 24 610 2 51 18 457 8 203 15381 6 152
SBA-18 30 762 6 152 20 508 7 178 15381 0 0
PBA-12 26 660 3 76 20 508 7 178 17432 8 203
PBA-18 32 813 8 203 22 559 6 152 17432 2 51
R1 MAX
XXBA-XX-XX-XX
Series
CS – Air cylinder,
single arm
S – Spring,
single arm
CP – Air cylinder,
parallel arm
P – Spring,
parallel arm
Tool Type
BA – Balance Arm
Arm Extension
12”24”
18”30”
(12” unless specified)
R1 MIN
Mount
-
–Post
AH – Adjustable Height
WM – Wall Mount
Adjustable Arm Extension
12”24”
18”30”
H MAX
H MIN
R2 MAX
R2 MIN
61
General Accessories
Air Cylinder & Spring Balance Arm Accessories
Single Arm Tool Holders
Part Number
Description
201690*
201601*
Manifold tool holder
Swivel manifold tool holder
201601
201690
*Use of 201601 requires 201690.
Tools not
included.
Parallel Arm Tool Holders
Part Number
Description
201675
204167
201607
201608
Parallel tool holder
Extended parallel tool holder
Swivel tool holder (small)
Swivel tool holder (large)
204167
201675
204120
201607
201608
Tools not included.
204119
204122
204014
Articulating Arm Extensions
Part Number
Length (inches)
204014
204122
204119
204120
12
18
24
30
Conversion Kits for Cleco
Screwdriver Balance Arms
To Convert Balance Arms
From
To
SBA-12
SBA-18
Spring
SBA or PBA
Standard Duty
PBA-12*
PBA-18*
Cylinder
SBA or PBA
Heavy Duty**
Part No.
521041
521042
201606
521060
* Conversion kits for -24 and -30 models are available upon request.
** Has four springs to support heavier tools or longer arms.
62
General Accessories
Air Hoses
Part
Number
a139856
45-1307
45-1408
45-1409
45-1508
45-1610
45-1810
45-1812
45-1825
Quick Disconnect Fittings
Hose I.D.
Fittings (NPT)
Length
in.
mm
in.
mm
ft.
m
3/16
3/16
1/4
1/4
5/16
3/8
1/2
1/2
1/2
4.7
4.7
6.4
6.4
7.9
9,5
12.7
12.7
12.7
1/8
1/8
1/4
1/8
1/4
3/8
3/8
1/2
1/2
1/8
1/4
1/4
1/4
1/4
3/8
1/2
1/2
1/2
6.0
7.0
8.0
8.0
8.0
10
10
12
25
1.8
2.1
2.4
2.4
2.4
3.0
3.0
3.7
7.6
Fitting Type*
Nominal Size
3/8”
1/2”
45-0710
–
–
45-0711
45-0713
–
3/8
45-0712
–
–
1/2
–
–
45-0717
NPT
in.
1/4”
1/8
1/4
Coupler (male NPT)
Coupler (female NPT)
1/4
–
–
–
3/8
45-0732
45-0734
45-0736
1/8
45-0720
–
–
1/4
–
45-0724
–
3/8
45-0722
45-0725
45-0726
1/2
–
–
45-0727
Nipple (male NPT)
General: 3/16” & 1/4” hoses have braided covers, all others have neoprene covers.
*Note: 3/8”-24 is a straight thread
Nipple (female NPT)
1/4
–
45-0744
–
3/8
45-0742
45-0745
45-0746
1/2
–
–
45-0747
1/4**
45-0748
–
–
1/2**
–
–
45-0753
Nipple (with hose barbs)
Activeswivel
Part No.
SW-102
SW-103
SW-104
SWR-102*
NPT
in.
1/4
3/8
1/2
1/4
Air Flow
SCFM
m3/min
25
45
65
25
7.1
12.7
18.4
7.1
Max. Pressure
psig
bar
150
150
150
150
10.4
10.4
10.4
10.4
Weight
lbs.
kg
0.20
0.40
0.80
0.25
0.09
0.18
0.36
0.11
* NOTE: Nipples of one size will not fit couplers of another size.
** NOTE: Indicates inside diameter of hose.
NOTE: 1/4” nominal will pass 49 cfm free air @ 90 psi, but pressure drop
exceeds 10 psi with air flow over 30 cfm.
3/8” nominal will pass 90 cfm free air @ 90 psi, but pressure drop exceeds 10 psi
with air flow over 53 cfm.
1/2” nominal will pass 168 cfm free air @ 90 psi, but pressure drop exceeds 10
psi with air flow over 109 cfm.
* NOTE: Equipped with built-in flow regulator.
Lubricants
Part Number
Size
Description
M.S.D.S. No.
540397
533485
536333
45-0918
45-0919
539317
1 qt. plastic
1 gal. metal
1 gal. metal
1 qt. plastic
1 gal metal
1 qt. plastic
Air line oil
Air line oil
High film strength
Air line oil (Dotco)
Air line oil (Dotco)
Hydraulic oil (Pulse)
cpt-153
cpt-153
cpt-154
cpt-155
cpt-155
cpt-157
513156
540394
45-0983
45-0980
18 oz. can
2.8 oz. tube
2 oz. tube
2 oz. tube
Teflon grease
Teflon grease
Dotco gear grease
Dotco gear lube
cpt-145
cpt-145
CPT-147
CPT-148
Oils
Greases
NOTE: Under normal conditions of use, lubrication products sold separately
for or used within these tools should not cause an exposure hazard.
Refer to the Material Safety Data Sheet (M.S.D.S.) for Safety and Disposal
information. M.S.D.S. sheets shown in the chart are available upon request
from Cooper Tools.
Push Type Grease Gun
Part Number: 45-1982
63
General Accessories
Apex Fastener Tools
Quality Fastener Tools
For more than half a century Apex has maintained the position of world leader in industrial
fastening tools. Many power and insert bits,
socket combinations and other drivers/adapters
pioneered by Apex have today become industry standards, while Apex quality, service and
selection give you unsurpassed value.
■ More Quality For Your Money
Apex quality starts with the selection of raw
materials. Only carefully chosen, high grade
tool steel is used to make Apex industrial
fastener tools. Next, each tool is precision
machined from solid bar stock to exacting
standards of accuracy. You always get a
snug, secure fit – a fit that is not possible from
stamped tools.
Finally, each Apex fastener tool is tempered
with our exclusive heat treating process. During
this step the degree of hardness is determined
based upon the application.
■ Fast Delivery
All Apex standard catalog items are available
off-the-shelf for immediate delivery. If you need
special assistance with your order, your Apex
manufacturer’s representative can handle any
questions your may have.
■ Special Orders
Apex offers the broadest selection of screw
driver and nut runner tools available, from
bits, sockets and universal wrenches to
extensions, adapters and nut setters. If you
have a special application, contact your Apex
representative. We may have what you need
in stock, or can design and produce special
fastener tools for almost any application.
POZIDRIV®
®
SQUARE
TORQ-SET
RECESS
ACR®
TRI-WING®
CLUTCH HEAD
SLOTTED
SOCKET HEAD
SEL-O-FIT®
PHILLIPS ACR®
TORQ-SET®
FREARSON
TORX®
®
PHILLIPS
HI-TORQUE®
■ Ordering Information
Apex products are distributed world-wide.
For a catalog of the complete line of Apex
quality fastener tools or to locate your
nearest Apex distributor, visit our website at
www.apex-tools.com.
Registered Trade Marks: HI-TORQUE, Voi-Shan; TORX, Camcar Division of Textron; ACR, POZIDRIV, TORQ-SET and TRI-WING, Phillips International Co.; SUPADRIV, EIS (Fasteners) LTD.; SEL-OFIT, FLIP-TIP, and Apex, Apex Tool Group, LLC.
64
Insert Bits
Insert Bits
(1/4” hex for socket head cap screws and set screws)
Used with Bit Holders
(all bits are 1.0” (25.4 mm) long)
A
Point
Size
“A”
Part
Number
Hex Size
(in.)
in.
mm
Cap
Screw
Set
Screw
185-00
185-0
185-1
185-9
185-2
185-10
185-3
185-4
185-5
185-6
185-7
185-8
1/16
5/64
3/32
7/64
1/8
9/64
5/32
3/16
7/32
1/4
5/16
3/8
1.00
1.00
1.00
1.00
1.00
1.00
1.31
1.31
1.31
1.31
1.25
1.25
25.4
25.4
25.4
25.4
25.4
25.4
33.3
33.3
33.3
33.3
31.8
31.8
1
2.3
4.5
6
8
8
10
1/4
—
5/16
3/8
7/16, 1/2
5.6
8
10
—
1/4
—
5/16
3/8
7/16
1/2
5/8
3/4
Square Drive Adapter
B
(1/4” hex drive sockets) Use with
Quick Change and Bit & Finder
Models, except as noted.
Part
Number
EX250-2
EX250-3
EX250-4
EX250-6
EX370
EX370-3
EX500-2
EX500-3
A
“B”
“A”
Sq. Drive
in.
mm
Bushing
Number
1/4
1/4
1/4
1/4
3/8
3/8
1/2
1/2
2.00
3.00
4.00
6.00
1.63
3.00
2.00
3.00
50.8
76.2
101.6
152.4
41.3
76.2
50.8
76.2
–
847295*
–
–
–
847295*
–
–
*Note: Required for bit and finder models.
Hex Extensions
Part
Number
Hex
Drive (in.)
Type of
Lock
Overall Length
in.
mm
Male Hex Drive with 1/2” Male Square
EX-501-3
EX-501-4
EX-501-6
7/16
7/16
7/16
Pin
Pin
Pin
3
4
6
76
102
152
Male Hex Drive with 3/8” Male Square
EX-371-3
EX-371-4
EX-371-6
7/16
7/16
7/16
Pin
Pin
Pin
3
4
6
76
102
152
Hex Drive Nutsetters
Part
Number
Size
(in.)
Overall
Length (in.)
Socket Nose
Diameter (in.)
1/2
1/2
9/16
9/16
5/8
5/8
3
4
3
4
3
6
13/16
13/16
7/8
7/8
1
1
7/16” 6 Point
6N-1416-3
6N-1416-4
6N-1418-3
6N-1418-4
6N-1420-3
6N-1420-6
0
1
2
3
Part Number
Phillips
Pozi-Drive
446-0 446-1P2D
HPL-1 440-1PZD
HPI-2 440-2PZD
HPI-3 440-3PZD
Wood
Flat & Oval
Round
0.1
0.1
2-4
2-4
5-8
5-10
10-16 12-16
Machine & Self-Tapping
Flat, Oval & Pan
0.1
2-4
5-10
12-16
Fillister
Truss
Binding
0.1
0.1
0.1
2-4
2-4
2-4
5-10 6-10 5-10
12-5/16 12-16 12-1/4
6 Point Sockets
Part No.
Hex
Opening
Overall
Length
Nose End Drive End
Diameter Diameter
3/8” Square Drive Sockets, SAE
3112
3/8
1 1/4
19/32
3114
7/16
1 1/2
11/16
3116
7/16
1/2
1 1/2
3118
7/16
9/16
1-1/2
1/2” Square Drive Sockets, SAE
5112
3/8
1 1/2
5/8
5114
7/16
1 1/2
11/16
5116
1/2
1 1/2
13/16
5120
5/8
1 1/2
1
5122
11/16
1 1/2
1 1/8
5124
3/4
1 1/2
1 1/8
3/4” Square Drive Sockets, SAE
7128
7/8
2
1 1/2
7132
1
2
1 5/8
7136
1 1/8
2 1/8
1 3/4
7140
1 1/4
2 1/8
2
7144
1 3/8
2 1/8
2 1/8
7148
1 1/2
2 1/4
2 1/4
1” Square Drive Sockets, SAE
8132
1
2 1/8
1 5/8
8140
1 1/4
2 1/8
2 1/8
8144
1 3/8
2 1/8
2 1/8
8148
1 1/2
2 1/4
2 1/4
8156
1 3/4
2 3/8
2 5/8
8164
2
2 5/8
3
1 1/2” Square Drive Sockets, SAE
9156
1 3/4
2 7/8
2 7/8
9160
1 7/8
3
3 1/8
9164
2
3 1/8
3 1/4
9172
2 1/4
3 1/4
3 3//8
3/8” Square Drive Sockets, Metric
12mm13
12
38.1
19.1
14mm13
14
38.1
22.2
16mm13
16
38.1
23.8
1/2” Square Drive Sockets, Metric
16mm15
16
38.1
25.4
18mm15
18
38.1
28.6
20mm15
20
38.1
31.7
22mm15
22
38.1
33.3
5/8” Square Drive Sockets, Metric
24mm16
24
51
38.1
3/4” Square Drive Sockets, Metric
28mm17
28
54
44.4
30mm17
30
54
47.6
32mm17
32
54
50.8
34mm17
34
54
54.0
36mm17
36
57
57.1
1” Square Drive Sockets, Metric
32mm18
32
54
54.0
34mm18
34
54
54.0
36mm18
36
57
57.1
38mm18
38
57
57.1
42mm18
42
60
63.5
46mm18
46
64
69.8
Opening
Depth
3/4
3/4
13/16
7/8
1/4
9/32
11/32
7/16
15/16
15/16
15/16
1
1 1/8
1 1/8
1/4
9/32
11/32
7/16
7/16
15/32
1 1/2
1 5/8
1 3/4
1 3/4
2 1/8
2 1/8
9/16
5/8
3/4
13/16
13/16
1
2
2 1/8
2 1/8
2 1/8
2 5/8
2 5/8
13/16
13/16
13/16
15/16
11/16
1 3/16
3
3
3 1/4
3 1/4
1 1/8
1 1/4
1 3/8
1 1/2
19.1
22.2
23.8
7.2
11.1
11.1
25.4
28.6
31.7
33.3
11.1
11.1
11.9
14.3
38.1
15.9
44.4
44.4
44.4
54.0
54.0
19.1
19.1
20.6
20.6
23.8
54.0
54.0
54.0
54.0
54.0
66.7
20.6
20.6
23.9
23.9
23.9
26.9
65
General Accessories
Apex µ-Guard
Quality Anti-Mar Fastener Tools
Begin With Quality Fastener Tools.
Prevents Side Impact Damage
Apex µ-Guard™ provides a protective barrier
between genuine Apex fastener tools and your finely
finished workpiece. The free-spinning patent-pending
design provides maximum protection for polished and
highly sensitive surfaces.
Apex µ-Guard™ covering is made of a thermo plastic
urethane (TPU elastomer) which cushions against
costly incidental side impacts. It offers the lowest
coefficient of friction for maximum tool efficiency. It is
also non-removable for tamper resistance.
With Apex µ-Guard™ you get the proven Apex
fastener tool fit and performance plus the best
protection available against marring and in-system
damage.
Free-Spinning Design
µ-Guard™ is your guard against the potential hazards
caused by rotational friction.
Virtually Damage Free
If it doesn’t say Apex
on the outside, how can
you be sure of what’s
on the inside?
66
µ-Guard Sockets
(Includes socket and cover)
Part Number
UGS-AB710
UGS-AB710-01
UGS-AB710-02
UGS-BA610
UGS-BA610-01
UGS-BB710
UGS-BB710-01
UGS-BB710-02
UGS-BB713
UGS-BB713-01
UGS-BB713-02
UGS-CB713
UGS-CB713-03
UGS-CB715
UGS-CB715-03
UGS-CB718
UGS-CB718-03
Socket
10MM21
M-10MM21
MB-10MM21
10MM13
M-10MM13
10MM23
M-10MM23
MB-10MM23
13MM23
M-13MM23
MB-13MM23
13MM25
SF-13MM25
15MM25
SF-15MM25
18MM25
SF-18MM25
Size
Drive End
Type
Sex
Socket
Length
Size
Fastener End
Type
Sex
Assembly
Features
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
standard
standard
standard
standard
standard
long
long
long
long
long
long
long
long
long
long
long
long
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
10 mm
13 mm
13 mm
13 mm
13 mm
13 mm
15 mm
15 mm
18 mm
18 mm
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
F
FS
FS, M
FS, M, B
FS
FS, M
FS
FS, M
FS, M, B
FS
FS, M
FS, M, B
FS
FS, SF
FS
FS, SF
FS
FS, SF
If your tool is not shown in the table of representative products above, please contact your Apex representative.
µ-Guard Extensions
(Includes extension and cover)
Part Number
UGE-A2A
UGE-A4A
UGE-A6A
UGE-B2A
UGE-B4A
UGE-B6A
UGE-B3C
UGE-B6C
UGE-B12C
UGE-C4C
UGE-C8C
UGE-C12C
Extension
EX-250-2
EX-250-4
EX-250-6
EX-370-2
EX-370-4
EX-370-6
EX-376-3
EX-376-6
EX-376-12
EX-508-4
EX-508-8
EX-508-12
Size
Drive End
Type
Sex
Extension
Length
Size
Socket End
Type
Sex
Assembly
Features*
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
Hex
Hex
Hex
Hex
Hex
Hex
Square
Square
Square
Square
Square
Square
M
M
M
M
M
M
F
F
F
F
F
F
2
4
6
2
4
6
3
6
12
4
8
12
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
M
M
M
M
M
M
M
M
M
M
M
M
FS
FS
FS
FS
FS
FS
FS
FS
FS
FS
FS
FS
If your tool is not shown in the table of representative products above, please contact your Apex representative.
µ-Guard Bit Holders
(Includes bit holder and cover)
Part Number
UGH-1NAA
UGH-1AAA
UGH-2NBG
UGH-1NBG
UGH-2NBC
UGH-1NBC
UGH-2NBD
UGH-1NBD
UGH-2NCK
UGH-2NCF
UGH-2NCJ
UGH-2NCL
Bit Holder
M-490
M-490-2
838
M-838
835
M-835
855
M-855
QR-308
QR-508
QR-314
QR-514
Size
Drive End
Type
Sex
Socket
Length
Size
Fastener End
Type
Sex
Assembly
Features
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
3/8
1/2
3/8
1/2
Hex
Hex
Square
Square
Square
Square
Square
Square
Square
Square
Square
Square
M
M
F
F
F
F
F
F
F
F
F
F
2 31/32
2
1 1/2
2 5/8
1 1/2
2 3/4
1 1/2
2 3/4
1 3/4
2 1/8
2
2 1/8
1/4
1/4
1/4
1/4
5/16
5/16
5/16
5/16
1/4
1/4
7/16
7/16
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
Hex
F
F
F
F
F
F
F
F
F
F
F
F
FS, M, ET
FS, M, ET
FS, ET
FS, M, ET
FS, ET
FS, M, ET
FS, ET
FS, M, ET
FS, QR
FS, QR
FS, QR
FS, QR
If your tool is not shown in the table of representative products above, please contact your Apex representative.
*Features Abbreviations
FS Free Spinning Tool is able to rotate independently of Cover
M Magnetic
Tool includes magnet to hold the position of the fastener during
fastening operation
B Bolt Clearance Tool is spring-loaded to allow bolt or nut to retract into the socket body
SF Surface Drive Tool has radiused corners to allow easier alignment and engagement
of fastener
ET Exposed Tip
Cover extends beyond end of Bit Holder to shield the majority of a
standard 1 inch long Insert Bit.
Tip of Insert Bit will not be covered to allow easier fastener engagement.
QRQuick Release Tool has tension feature to allow quick & easy change between bits
Cover will not extend beyond end of Bit Holder
Notes:
Reported lengths are based on uncovered tool length only for reference. Cover may extend
beyond end of tool by 2 mm unless otherwise noted.
67
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising