Siemens WM14Q462DN/15 iQ500 Washing machine SIWAMAT Instruction manual

Add to My manuals
8 Pages

advertisement

Siemens WM14Q462DN/15 iQ500 Washing machine SIWAMAT Instruction manual | Manualzz

Your washing machine

Congratulations on having opted for a modern, high-quality domestic appliance manufactured by Siemens. This washing machine is distinguished by its economical energy consumption.

Each machine that leaves our factory has been inspected thoroughly to ensure that it functions properly and is in perfect condition.

For further information on our products, accessories, spares and services, consult our website www.siemens-home.com or contact any of our customer service centres.

You can find the contact details for your nearest after-sales service here or in the aftersales service directory (depending on model).

– GB 0844 8928999 (calls from a BT landline will be charged at up to 3 pence per minute. A call set-up fee of up to 6 pence may apply)

– IE 01450 2655 ( 0.03 € per minute at peak. Off peak 0.0088 € per minute )

Environmentally friendly waste disposal

All packaging must be disposed of in accordance with environmental guidelines.

This appliance is certified in accordance with European Directive 2002/96/CE on the waste electrical and electronic equipment (WEEE).

This directive provides the framework for the EU-wide collection and reuse of used appliances.

Contents

Page ʋ

Intended use .......................................................................................1

ʋ

Programmes ........................................................................................1

ʋ

Setting and adjusting the programme ...........................................3

ʋ

Washing ...........................................................................................3/4 ʋ

After washing ......................................................................................4

ʋ

Individual settings ..........................................................................5/6 ʋ

Important information ...................................................................... 6 ʋ

Overview of programmes ................................................................7

ʋ

Safety instructions .............................................................................8

ʋ

Consumption values .........................................................................8

ʋ

Care and cleaning .............................................................................9

ʋ

Information on the display panel ....................................................9

ʋ

Maintenance .................................................................................... 10 ʋ

What to do if ... ................................................................................ 11

Protection of the environment/Conservation tips

– Always fill the washing machine with a maximum amount of laundry for the relevant programme.

– Wash normally soiled laundry without a pre-wash.

– Measure the detergent according to the manufacturer's instructions and water hardness.

– If the laundry is then dried in the tumble dryer, select spin speed according to instructions of dryer manufacturer.

Intended use

.

ʋ for domestic use only, ʋ for washing machine-washable fabrics and hand-washable wool in detergent solution, ʋ to be operated with cold or cold and hot (max. 60 ºC) drinking water, depending on model, and commercially available detergents and care products which are suitable for use in washing machines.

– Do not leave children unattended near the washing machine.

– The washing machine is not to be used by children or persons not familiar with the operating instructions.

– Keep pets away from the washing machine.

Preparation

Correct installation according to the separate installations actions.

Checking the machine

– Never use a damaged machine!

– Contact customer service!

Connecting the mains plug

Make sure your hands are dry!

Handle the plug only!

Turning on the tap

Before the first wash,

run a wash cycle with no laundry in the machine a Page 9.

Sorting and loading laundry

Follow the manufacturer's care information!

Sort laundry according to the label's indications.

And according to type, colour, soiling and temperature.

Do not exceed the maximum load a Page 7 .

Observe important information!

a Page 6

Wash laundry of different sizes in the same wash programme.

Close the door. Take care not to trap items of laundry between the washing machine door and seal.

Add detergent and care products

Measure detergent according: amount of laundry, soiling, water hardness (ask your water supply company) and manufacturer's instructions.

For models without insert for liquid detergent:

Pour liquid detergent into the appropriate dispenser and place in the drum.

Programmes

Detailed overview of programmes a page 7 .

Temperature and spin speed can be selected individually, irrespective of the selected programme and programme progress.

Insert for liquid detergent (depending on model) a page 6

Compartment II : detergent for the main wash, water softener, bleach, stain remover

Compartment ~ : Fabric softener, bleach

Compartment I : Detergent for prewash

Bomuld (Cottons) hard-wearing fabrics

+ Forvask (Prewash) hard-wearing fabrics, prewash

Strygelet (Easy-Care) synthetic fabrics

+ Forvask (Prewash) synthetic fabrics, prewash

Mix Different types of laundry

Finvask/Silke

(Delicate/Silk)

ÿ

Uld-/håndvask

(Wool)

Delicate washable fabrics

Hand/machine washable wool

Skyl/Centrifugering

(Rinse/Spin)

Laundry washed by hand, h

(Extra rinse) button activated; if only using the spin cycle, deactivate the button

Udpumpning (Empty) Drain rinsing water with c (without final spin)

Skånecentri fugering

(Gentle spin)

Laundry washed by hand with a reduced spin speed

Short programme superLyn 15’

(Super Quick)

Strygelet Special

(Easy-Care)

Lingerie (Lingery)

Skjorter/Business

(Shirts)

Outdoor

Hard-wearing fabrics

Lingery programme

No-iron shirts

All-weather, sports and outdoor fabrics a page 6

Programme selector

Programme selector for switching the machine on and off and for selecting the programme. Can be turned in either direction.

Display panel / option buttons

: - 90 ºC ºC (temp.)

- 1400* c (rpm)

1 - 24 h

Status displays

1 üü 2 üü c ü ¯ s r

(Ready in)

Dilute viscous fabric softener and fabric conditioner with water.

This prevents blockages.

Setting** and adjusting programmes

Additional functions Start /

Reload

**If the s

symbol flashes in the display panel, the childproof lock is active a Deactivate childproof lock, page 5 .

Additional functions and option buttons a Individual settings, page 5 .

Press (Start/Reload)

All buttons are sensitive and need only to be touched lightly. Press and hold the (Ready in) option button for an automatic run through all setting options.

Select the temperature ( : = cold)

Select the spin speed (* depending on the model) or c (without final spin, laundry soaks in the last rinsing water, display panel - - - )

End of programme after ...

Programme sequence displays:

Wash, rinse, spin, programme duration or end (-0-)

Childproof lock a page 5

Open the washing machine door, reload laundry a pages 4, 5

1

2

Washing

Detergent drawer with compartments I , II , ~

Drum

Control panel

Door

Service door

Washing

3

Removing the washing

Open the washing machine door and remove the washing.

If (without final spin) is active: turn the programme selector to

Udpumpning (Empty) or select the spin speed.

Choose ( Start/ Reload).

– Remove any foreign objects. Risk of rusting.

– Leave the washing machine door and detergent door open so that any residual water can evaporate.

Turn the tap off

Not required for Aqua-Stop models a Refer to Installation instructions .

Switching off

Turn the programme selector to Fra (Off) .

End of programme when ...

...

(Start/Reload) flashes and ¯ appears on the display panel.

Note : If display panel lighting is switched off, press any button a Energy saving mode, page 5 .

Interrupting the programme

Programmes at high temperatures:

– Cool washing: Select Skyl/ Centrifugering ( Rinse /Spin).

– Press ( Start/ Reload).

Programmes at lower temperatures:

– Select Skyl /Centrifugering (Rinse /Spin ) (deactivate h

(Extra rinse) button) or Udpumpning (Empty) .

– Press ( Start/ Reload).

Changing the programme if ...

... you have selected the wrong programme by mistake:

– Reselect the programme.

– Press ( Start/ Reload). The new programme starts from the beginning.

Reloading laundry if ...

a page 5

... Press (Start/ Reload ); both the symbols „§‚ + r

are displayed on the display panel. If ǯ is lit, the washing machine door cannot be opened.

Press ( Start/ Reload).

Individual settings

ʑ

Option buttons

You can change the spin speed and the temperature before the selected programme starts and while it is running. The effects depend on the programme progress.

ʑ

°

C

(Temperature )

You can change the displayed washing temperature. The maximum selectable temperature depends on the current programme.

ʑ

(spin speed in rpm/ (without final spin))

You can change the displayed spin speed. The maximum selectable spin speed depends on the model and which programme is currently selected. ʑ

(Ready in)

When you select the programme, the relevant programme duration is displayed. You can delay the end of the ʑ programme before it begins. The ready in-time can be set in increments of one hour up to a maximum of 24 hours.

Press the (Ready in) button until the required number of hours is displayed (h = hour). Choose ( Start/ Reload).

Additional functions

speedPerfect i a Overview of programmes , page 7

For washing in a shorter time with a washing outcome comparable to that of the standard programme. Maximum load a Overview of programmes, page 7.

ecoPerfect

¢

For saving energy with a washing performance comparable to that of the standard programme.

â

(Reduced Ironing)

Special spin sequence with subsequent fluffing. Gentle final spin: residual moisture in the laundry slightly increased.

h

(Extra rinse)

Additional rinse cycle. For areas with very soft water or for further enhancing the spin result.

ʑ

Childproof lock

s in the display panel You can lock the washing machine to prevent the functions you have set from being changed inadvertently.

ON/OFF: after the start/end of the programme, press and hold (Start/Reload) for approx. 5 seconds.

Note: The childlock can remain activated until you wish to start the next programme, even after switching off the machine.

Then you can deactivate the childlock before starting the programme and activate it again as necessary once the programme has started.

Note:

– The s

symbol is lit: Childlock active.

– The s

symbol flashes: Childlock active and then the programme selector is altered. To prevent the programme from stopping, move the programme selector back to the original programme, the s

symbol is lit again.

ʑ

Reloading

„§‚ + o r in the display panel

Press (Start/ Reload ) if you want to add additional items of laundry after the programme has started. The machine checks whether reloading is possible.

„§‚ + r

are lit: reloading is possible.

ǯ flashes: wait until „§‚ + r

are lit.

Note : do not open the door until both the „§‚ + r

symbols are lit.

ǯ : it is not possible to reload.

Note : for safety reasons, the washing machine door remains locked when the water level and/or temperature is high, or during spinning.

To continue the programme, press the ( Start/ Reload) button.

ʑ

Energy saving mode

The display panel lighting goes out after a few minutes, ( Start/Reload ) flashes. Press any button to switch on the lighting.

ʑ

(Start/Reload)

To start the programme or to subsequently load additional laundry, and to activate/deactivate the childproof lock .

Individual settings

ʑ

Signal

1.

Activating the mode for setting the signal volume j

Set to o

Button signals

1 step, the display panel lights up press and hold

Information signals

2.

Setting the volume for...

+ 1 step, release j

* if necessary, select the function several times direct setting the volume* 1 step setting the volume* set to o

Important information

Protecting the laundry and the machine

– When determining the dosage of all washing powders, additives and cleaning agents, you must follow the manufacturer's instructions..

– Empty all pockets

– Check for metal items (paper-clips, etc.).

– Wash delicates in a laundry bag (tights, curtains, underwired bras).

– Fasten zips, do up any buttons.

– Brush sand out of pockets and collars.

– Remove curtain fittings or place in the laundry bag.

Laundry with varying degrees of soiling

light

Wash new items of clothing separately.

Do not prewash. If required, choose the additional function speedPerfect .

i intense wash

Soaking

Pre-treat any stains as necessary.

Load less laundry. Choose a programme with a prewash.

Load laundry of the same colour.

Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions. Turn the programme selector to Bomuld (Cottons) 30 °C and press ( Start/ Reload). After approx. 10 minutes, press

(Start/ Reload ) to pause the programme. Once the required soaking time has elapsed, press ( Start/ Reload) again to continue the programme, or select a different programme.

Starch

Laundry should not be treated with fabric softener.

Starching is possible in all wash programmes if liquid starch is used. Pour the starch in accordance with the manufacturer's instructions into fabric softener compartment ~ (rinse first if necessary).

Dyeing / Bleaching

Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye manufacturer's instructions. Do not use the washing machine for bleaching clothes.

Outdoor

Laundry must not be treated with fabric softener.

Special detergent is available for machine washing, particularly in sports shops. Dosage according to the manufacturer's instructions. Place the special detergent for outdoor clothing in compartment II

Turn the programme selector to Outdoor . Press Temperature and ( Start/ Reload).

Insert for liquid detergent

depending on model

Position the insert for dispensing liquid detergent:

– Remove the detergent drawer completely a page 9

– Slide the insert forwards and click into place.

Do not use the insert (slide upwards): for gel detergents and washing powder, for programmes with + Forvask (Prewash) and End time option.

7

Safety instructions

– Carefully read the instruction manual and the information enclosed, and act accordingly.

– Keep the machine's documentation for future reference.

Risk of electric shock!

Danger to life!

Danger of suffocation!

Risk of poisoning!

– Never pull the cable to disconnect the mains plug!

– Never insert/disconnect the mains plug with damp hands.

For worn-out appliances:

– Disconnect the mains plug.

– Sever the mains cable and discard along with the plug.

– Destroy the lock on the washing machine door. This will prevent children from locking themselves in and risking their lives.

– Keep packaging, film and packaging parts out of the reach of children.

Risk of explosion!

Risk of injury!

– Keep detergents and care products out of the reach of children.

– Items of laundry pretreated with cleaning agents containing solvents, e.g. stain remover/cleaning solvent may lead to an explosion after being loaded into the washing machine.

Rinse items of laundry thoroughly by hand beforehand.

– The washing machine door may become very hot.

– Be careful when draining hot detergent solution.

– Do not climb onto the washing machine.

– Do not lean on the open washing machine door.

– Do not reach into the drum if it is still rotating.

– Be careful when opening the detergent drawer while the machine is in operation.

Consumption values

depending on model

Programme Load Electricity *** Water ***

Programme duration ***

Bomuld 20 °C 8 kg 0.37 kWh 68 l 2 ½ h

Bomuld 30 °C

Bomuld 40 °C*

Bomuld

Bomuld

60 °C

90 °C

8 kg

8 kg

8 kg

8 kg

0.40 kWh

1.05 kWh

1.15 kWh

2.30 kWh

68 l

68 l

68 l

80 l

Strygelet 40 °C*

Mix 40 °C

3.5 kg

3.5 kg

0.64 kWh

0.54 kWh

55 l

47 l

Finvask/Silke 30 °C

Uld-/håndvask 30 °C

2 kg

2 kg

0.19 kWh

0.17 kWh

34 l

39 l

B h

B h

* Programme setting for testing in accordance with valid standard EN60456.

Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.

2 ½ h

2 B h

2 B h

2 B h

1 B h

1 h

Programme

Additional function

Load

Annual energy consumption

Annual water consumption

Bomuld 40/60 °C ecoPerfect ¢ ** 8/4 kg 179 kWh 8700 l

** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).

*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient temperature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional functions.

8

Care and cleaning

– Risk of electric shock!

Disconnect the mains plug.

– Risk of explosion!

Do not use solvents.

Before the first wash

Do not put laundry in the machine! Turn on the tap. Put into compartment II:

– approx. 2 litres of water

– detergent (measure according to the manufacturer's instructions for lightly soiled laundry and water hardness)

Turn the programme selector to Strygelet (Easy-Care) 60 °C and press turn the programme selector to Fra (Off) .

( Start/ Reload) . At the end of the programme,

Machine housing, control panel

– Remove detergent and cleaning agent residue.

– Wipe with a soft, damp cloth.

– Do not wash the machine with a jet of water!

Cleaning the detergent drawer ...

... if it contains detergent or fabric softener residues.

1.

Pull out, press insert down and remove drawer completely.

2.

To remove the insert: press upwards from below with your finger.

3.

For models with insert for liquid detergent:Slide the insert upwards and remove it from the back.

4.

Clean the detergent dispenser tray and inserts with water and a brush and dry them.

5.

Attach the insert and engage (connect the cylinder to the guide pin).

6.

Push in the detergent drawer.

Leave the detergent drawer open so that any residual water can evaporate.

Drum

Leave the washing machine door open so that the drum can dry out.

For rust stains, use chlorine-free cleaning agent, not steel wool.

Descaling

Ensure there is no laundry in the machine!

This will not be necessary if the correct dosage of detergent is used. If it is, descale the appliance according to the manufacturer's instructions. Descaling products can be acquired on the website or from customer services a Installation instructions .

Emergency release

e.g. in the event of a power cut

The programme continues to run when the power has been restored. However, if the laundry has to be removed, the washing machine door can be opened as follows:

Risk of scalding!

The detergent solution and laundry may be hot. Let it cool.

Do not reach into the drum if it is still rotating.

Do not open the washing machine door if water can be seen through the glass.

1.

Turn the programme selector to Fra (Off) and disconnect the mains plug.

2.

Drain the detergent solution a page 10 .

3.

Pull the emergency release downwards with a tool and release.

The washing machine door can then be opened.

Information on the display panel

depending on model r flashes Close the washing machine door properly; laundry may be caught.

§ : ³Å ,

§ : ›É

§

:

³µ

Turn on the (cold water) tap fully, supply hose kinked or trapped;

Clean the filter a page 10 , water pressure too low.

– Detergent solution pump blocked; Clean the detergent solution pump a page 10.

– Drainage hose / waste pipe blocked; Clean the drainage hose at the siphon a page 10 .

– Heavy foam build-up a page 11 , status indicator

1

flashes.

§ : ›´ Water in the base tub, appliance leaking. Call customer services!

© : ³¯ s

– Open the (hot water) tap fully.

– Inlet hose kinked/trapped.

– Water pressure too low. Clean the filter a page 10 .

– Hot water hose not connected; appliance will operate using cold water only. Ignore information, only for first wash cycle.

Childproof lock activated: to deactivate a page 5 .

Maintenance

– Risk of burning!

Allow the detergent solution to cool.

– Turn off the tap.

Detergent solution pump

Turn the programme selector to Fra (Off) and disconnect the mains plug.

1.

Using a screwdriver or the insert for liquid detergent

(depending on model), open and remove the service flap.

2.

Remove the folding gutter and place a large enough container underneath .

3.

For models with a drainage hose: Remove the drainage hose from the retainer and pull it from the housing.

Remove the sealing cap, allow the detergent solution to flow out into the container. Replace the sealing cap and place the drainage hose in the retainer.

3* For models without a drainage hose: Carefully unscrew the pump cover 180° or until the detergent solution begins to flow out on the folding gutter. When the container is full, close the pump cover and empty the container. Repeat the above steps until all the detergent solution has completely drained out.

4.

Carefully unscrew the pump cover (there may be residual water).

5.

Clean the interior, pump cover thread and pump housing (the impeller in the detergent solution pump must rotate).

6.

Replace the pump cover and screw it tightly.

7.

Return the drainage hose (depending on model) and the folding gutter to their start position.

8.

Place the service flap back on and close.

To prevent unused detergent from flowing straight into the drain during the next wash:

Pour 2 litres of water into compartment II and then start the Udpumpning (Empty) programme.

Drainage hose at the siphon

Turn the programme selector to Fra (Off) and disconnect the mains plug.

1.

Loosen the hose clamp, carefully remove the drainage hose (residual water).

2.

Clean the drainage hose and siphon connecting piece.

3.

Reattach the drainage hose and secure the connection with the hose clamp.

Filter in the water supply

Risk of electric shock!

Do not immerse the Aqua-Stop safety device in water (contains an electric valve).

Reduce the water pressure in the supply hose:

1.

Turn off the tap.

2.

Select any programme (except Skyl/Centrifugering (Rinse/Spin) // Udpumpning

(Empty) ).

3.

Choose ( Start/ Reload). Let the programme run for approximately 40 seconds.

4.

Turn the programme selector to Fra (Off) . Disconnect the mains plug.

Clean the filter:

5.

D isconnect the hose from the tap.

Clean the filter using a small brush. and/or for Standard and Aqua-Secure models:

Remove the hose on the rear of the appliance.

Remove the filter with pliers and clean.

6.

Connect the hose and check for leaks.

10

What to do if...

ʑ

Water is leaking out ʑ

No water supply.

Detergent not dispensed.

– Attach/replace the drainage hose correctly.

– Tighten the screw connection of the supply hose.

– ( Start/Reload ) not selected?

– Tap not turned on?

– Filter blocked? Clean the filter a page 10 .

– Supply hose kinked or trapped?

ʑ

The appliance door will not open.

– Safety function active. Programme stopped? a page 4 .

– (without final spin) selected? a page 3, 4 .

– Can be opened by emergency release only? a page 9 .

– Door locked after the washing machine is switched off: Switch on the washing machine and wait for 5 seconds.

ʑ

The selected programme does not start.

– ( Start/Reload ) or (Ready in) time selected?

– Washing machine door closed?

– Childproof lock active? Deactivate a page 5 .

ʑ

Detergent solution is not drained.

– (without final spin) selected? a page 3, 4 .

– Clean the detergent solution pump a page 10 .

– Clean the waste pipe and/or drainage hose.

ʑ

No water can be seen in the drum.

ʑ

Spin result not satisfactory.

Laundry wet/too damp.

– Not a fault. Water remains inside below the visible area.

– Not a fault. Spin control system has stopped the spin cycle. Uneven distribution of laundry.

Distribute large and small items of laundry evenly in the drum.

â

(Reduced Ironing) selected? a page 5 .

– Selected speed too low? a page 5 .

ʑ

Programme duration changes suddenly during operation.

– Not a fault. The program time can vary according to the distribution of laundry, with it therefore being possible for the display panel to show adjustments in the duration.

ʑ

Spin cycle performed several times.

ʑ

Residual water in the compartment for care products.

ʑ

Odour formation in the washing machine.

ʑ

Status display

1

flashing.

Appliance has detected a detergent overload.

– Not a fault. The balance control system has detected an imbalance and is attempting to redress this by repeating the spin.

– Not a fault: the action of the care product is not affected.

– Clean the compartment if necessary a page 9 .

– Run programme Bomuld (Cottons) 90 °C without laundry. Use standard detergent.

– Too much detergent used?

If foam is escaping from the detergent drawer: mix 1 tablespoon of fabric softener with ½ litre of water and pour into compartment II (not with outdoor or down fabrics) .

– Reduce the detergent dosage for the next wash cycle.

ʑ

Intense noise formation, vibrations and "wandering" during the spin cycle.

– Are the appliance feet fixed?

Secure the appliance feet a Installation instructions .

– Transportation safety devices removed?

Remove transportation safety devices a Installation instructions .

ʑ

Display panel/indicator lamps remain turned off while the machine is working.

– Energy-saving mode a page 5 .

– Power cut?

– Fuses triggered? Reset/change the fuse.

– If the fault occurs repeatedly, call customer services.

ʑ

Programme sequence longer than usual.

– Not a fault. Unbalanced load detection system adjusts imbalance by repeatedly distributing the laundry.

– Not a fault: foam detection system active; adds an additional rinse cycle.

ʑ

Detergent residues on the laundry.

– Occasionally, phosphate-free detergents contain water-insoluble residues.

– Select Skyl/Centrifugering (Rinse/Spin) or brush out the laundry after washing.

If you cannot correct a fault yourself or if a repair is necessary:

– Turn the programme selector to Fra (Off) and remove the mains plug from the socket.

– Turn off the water supply and call customer services a Installation instructions.

11

Observe the safety instructions on page 8!

Washing

Machine

Instructions for use

Read these instructions and the separate installation instructions before operating the washing machine.

en

Your washing machine

Congratulations on having opted for a modern, high-quality domestic appliance manufactured by Siemens. This washing machine is distinguished by its economical energy consumption.

Each machine that leaves our factory has been inspected thoroughly to ensure that it functions properly and is in perfect condition.

For further information on our products, accessories, spares and services, consult our website www.siemens-home.com or contact any of our customer service centres.

You can find the contact details for your nearest after-sales service here or in the aftersales service directory (depending on model).

– GB 0844 8928999 (calls from a BT landline will be charged at up to 3 pence per minute. A call set-up fee of up to 6 pence may apply)

– IE 01450 2655 ( 0.03 € per minute at peak. Off peak 0.0088 € per minute )

Environmentally friendly waste disposal

All packaging must be disposed of in accordance with environmental guidelines.

This appliance is certified in accordance with European Directive 2002/96/CE on the waste electrical and electronic equipment (WEEE).

This directive provides the framework for the EU-wide collection and reuse of used appliances.

Contents

Page ʋ Intended use .......................................................................................1

ʋ Programmes ........................................................................................1

ʋ Setting and adjusting the programme ...........................................3

ʋ Washing ...........................................................................................3/4 ʋ After washing ......................................................................................4

ʋ Individual settings ..........................................................................5/6 ʋ Important information ...................................................................... 6 ʋ Overview of programmes ................................................................7

ʋ Safety instructions .............................................................................8

ʋ Consumption values .........................................................................8

ʋ Care and cleaning .............................................................................9

ʋ Information on the display panel ....................................................9

ʋ Maintenance .................................................................................... 10 ʋ What to do if ... ................................................................................ 11

Protection of the environment/Conservation tips

– Always fill the washing machine with a maximum amount of laundry for the relevant programme.

– Wash normally soiled laundry without a pre-wash.

– Measure the detergent according to the manufacturer's instructions and water hardness.

– If the laundry is then dried in the tumble dryer, select spin speed according to instructions of dryer manufacturer.

Intended use

.

ʋ for domestic use only, ʋ for washing machine-washable fabrics and hand-washable wool in detergent solution, ʋ to be operated with cold or cold and hot (max. 60 ºC) drinking water, depending on model, and commercially available detergents and care products which are suitable for use in washing machines.

– Do not leave children unattended near the washing machine.

– The washing machine is not to be used by children or persons not familiar with the operating instructions.

– Keep pets away from the washing machine.

Preparation

Correct installation according to the separate installations actions.

Checking the machine

– Never use a damaged machine!

– Contact customer service!

Connecting the mains plug

Make sure your hands are dry!

Handle the plug only!

Turning on the tap

Close the door. Take care not to trap items of laundry b

Programmes

Detailed overview of programmes a page 7 .

Temperature and spin speed can be selected individually, irrespective of the selected programme and programme progress.

Insert for liquid detergent (depending on model) a page 6

Compartment II : detergent for the main wash, water softener, bleach, stain remover

Compartment ~ : Fabric softener, bleach

Compartment I : Detergent for prewash

Bomuld (Cottons) hard-wearing fabrics

+ Forvask (Prewash) hard-wearing fabrics, prewash

Strygelet (Easy-Care) synthetic fabrics

+ Forvask (Prewash) synthetic fabrics, prewash

Different types of laundry Mix

Finvask/Silke

(Delicate/Silk)

ÿ Uld-/håndvask

(Wool)

Delicate washable fabrics

Hand/machine washable wool

Skyl/Centrifugering

(Rinse/Spin)

Laundry washed by hand, h

(Extra rinse) button activated; if only using the spin cycle, deactivate the button

Udpumpning (Empty) Drain rinsing water with c (without final spin)

Skånecentri fugering

(Gentle spin)

Laundry washed by hand with a reduced spin speed superLyn 15’

(Super Quick)

Strygelet Special

(Easy-Care)

Lingerie (Lingery)

Skjorter/Business

(Shirts)

Outdoor

Short programme

Hard-wearing fabrics

Lingery programme

No-iron shirts

All-weather, sports and outdoor fabrics a page 6

Programme selector

Programme selector for switching the machine on and off and for selecting the programme. Can be turned in either direction.

Display panel / option buttons

: - 90 ºC ºC (temp.)

- 1400* c (rpm)

1 - 24 h

Status displays

1 üü 2 üü c ü ¯ s r

(Ready in)

Additional functions

Select the temperature ( :

Select the spin speed (* depending on the model) c spin, laundry soaks in the last rinsing water, display

End of programme after ...

Programme sequence displays:

Wash, rinse, spin, programme duration or end (-0-)

Childproof lock a

Open the washing machine door, reload laundry a s a a a a a

~

ǯ

¯ a a

„§‚ r h a ʑ ʑ ʑ ʑ ʑ

¢ i

â h ʑ s a ʑ

„§‚ o r a s s s

„§‚ r

ǯ

ǯ

„§‚ r

„§‚ r ʑ ʑ ʑ a

~ j j i

ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ

ÿ a c h a

Before the first wash,

run a wash cycle with no laundry in the machine a Page 9.

Sorting and loading laundry

Follow the manufacturer's care information!

Sort laundry according to the label's indications.

And according to type, colour, soiling and temperature.

Do not exceed the maximum load a Page 7 .

Observe important information!

a Page 6

Wash laundry of different sizes in the same wash programme.

Close the door. Take care not to trap items of laundry between the washing machine door and seal.

Add detergent and care products

Measure detergent according: amount of laundry, soiling, water hardness (ask your water supply company) and manufacturer's instructions.

For models without insert for liquid detergent:

Pour liquid detergent into the appropriate dispenser and place in the drum.

a

~

Dilute viscous fabric softener and fabric conditioner with water.

This prevents blockages.

: ºC (temp.) c (rpm)

Status displays

1 üü 2 üü c ü ¯ s r

(Ready in)

Setting** and adjusting programmes

Additional functions Start /

Reload

**If the s symbol flashes in the display panel, the childproof lock is active a Deactivate childproof lock, page 5 .

Additional functions and option buttons a Individual settings, page 5 .

Press (Start/Reload)

All buttons are sensitive and need only to be touched lightly. Press and hold the (Ready in) option button for an automatic run through all setting options.

Select the temperature ( : = cold)

Select the spin speed (* depending on the model) or c (without final spin, laundry soaks in the last rinsing water, display panel - - - )

End of programme after ...

Programme sequence displays:

Wash, rinse, spin, programme duration or end (-0-)

Childproof lock a page 5

Open the washing machine door, reload laundry a pages 4, 5

1

2

Washing

Detergent drawer with compartments I , II , ~

Drum

Control panel

Door

Service door

Washing

Removing the washing

Open the washing machine door and remove the washing.

If (without final spin) is active: turn the programme selector to

Udpumpning (Empty) or select the spin speed.

Choose ( Start/ Reload).

– Remove any foreign objects. Risk of rusting.

– Leave the washing machine door and detergent door open so that any residual water can evaporate.

Turn the tap off

Not required for Aqua-Stop models a Refer to Installation instructions .

ʑ ʑ ʑ ʑ

Switching off

Turn the programme selector to Fra (Off) .

ʑ

3

End of programme when ...

...

(Start/Reload) flashes and ¯ appears on the display panel.

Note : If display panel lighting is switched off, press any button a Energy saving mode, page 5 .

Interrupting the programme

Programmes at high temperatures:

– Cool washing: Select Skyl/ Centrifugering ( Rinse /Spin).

– Press ( Start/ Reload).

Programmes at lower temperatures:

– Select Skyl /Centrifugering (Rinse /Spin ) (deactivate h

(Extra rinse) button) or Udpumpning (Empty) .

– Press ( Start/ Reload).

Changing the programme if ...

... you have selected the wrong programme by mistake:

– Reselect the programme.

– Press ( Start/ Reload). The new programme starts from the beginning.

Reloading laundry if ...

a page 5

... Press (Start/ Reload ); both the symbols „§‚ + r are displayed on the display panel. If ǯ is lit, the washing machine door cannot be opened.

Press ( Start/ Reload).

â h ʑ s ʑ

„§‚ o r ʑ ʑ

¢ i a a s s s

„§‚ r

ǯ

ǯ

„§‚ r

„§‚ r ʑ a

~ j j i

ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ ʋ

ÿ a c h a

~ a

: c

1 üü 2 üü c ü ¯ s r a

: a c s a a a a a

~ a

¯ h a Energy a

„§‚ r are displayed on

ǯ is lit, the washing machine door cannot be opened.

Individual settings

ʑ ʑ

Option buttons

You can change the spin speed and the temperature before the selected programme starts and while it is running. The effects depend on the programme progress.

°

C

(Temperature )

You can change the displayed washing temperature. The maximum selectable temperature depends on the current programme.

(spin speed in rpm/ (without final spin))

ʑ ʑ ʑ

You can change the displayed spin speed. The maximum selectable spin speed depends on the model and which programme is currently selected.

(Ready in)

When you select the programme, the relevant programme duration is displayed. You can delay the end of the programme before it begins. The ready in-time can be set in increments of one hour up to a maximum of 24 hours.

Press the (Ready in) button until the required number of hours is displayed (h = hour). Choose ( Start/ Reload).

Additional functions

a Overview of programmes , page 7 speedPerfect i For washing in a shorter time with a washing outcome comparable to that of the standard programme. Maximum load a Overview of programmes, page 7.

ecoPerfect ¢ For saving energy with a washing performance comparable to that of the standard programme.

â

(Reduced Ironing)

Special spin sequence with subsequent fluffing. Gentle final spin: residual moisture in the laundry slightly increased.

h

(Extra rinse)

Additional rinse cycle. For areas with very soft water or for further enhancing the spin result.

ʑ

Childproof lock

s in the display panel You can lock the washing machine to prevent the functions you have set from being changed inadvertently.

ON/OFF: after the start/end of the programme, press and hold (Start/Reload) for approx. 5 seconds.

Note: The childlock can remain activated until you wish to start the next programme, even after switching off the machine.

Then you can deactivate the childlock before starting the programme and activate it again as necessary once the programme has started.

Note:

– The s symbol is lit: Childlock active.

– The s symbol flashes: Childlock active and then the programme selector is altered. To prevent the programme from stopping, move the programme selector back to the original programme, the s symbol is lit again.

ʑ

Reloading

„§‚ + o r in the display panel

Press (Start/ Reload ) if you want to add additional items of laundry after the programme has started. The machine checks whether reloading is possible.

„§‚ + r are lit: reloading is possible.

ǯ flashes: wait until „§‚ + r are lit.

Note : do not open the door until both the „§‚ + r symbols are lit.

ǯ : it is not possible to reload.

Note : for safety reasons, the washing machine door remains locked when the water level and/or temperature is high, or during spinning.

To continue the programme, press the ( Start/ Reload) button.

ʑ

Energy saving mode

The display panel lighting goes out after a few minutes, ( Start/Reload ) flashes. Press any button to switch on the lighting.

ʑ

(Start/Reload)

To start the programme or to subsequently load additional laundry, and to activate/deactivate the childproof lock .

Individual settings

ʑ

Signal

1.

Activating the mode for setting the signal volume j

Set to o

Button signals

1 step, the display panel lights up press and hold

Information signals

2.

Setting the volume for...

+ 1 step, release j

* if necessary, select the function several times direct setting the volume* 1 step setting the volume* set to o

Important information

Protecting the laundry and the machine

– When determining the dosage of all washing powders, additives and cleaning agents, you must follow the manufacturer's instructions..

– Empty all pockets

– Check for metal items (paper-clips, etc.).

– Wash delicates in a laundry bag (tights, curtains, underwired bras).

– Fasten zips, do up any buttons.

– Brush sand out of pockets and collars.

– Remove curtain fittings or place in the laundry bag.

Laundry with varying degrees of soiling

light

Wash new items of clothing separately.

Do not prewash. If required, choose the additional function speedPerfect .

i

Pre-treat any stains as necessary. intense wash

Soaking

Load less laundry. Choose a programme with a prewash.

Load laundry of the same colour.

Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions. Turn the programme selector to Bomuld (Cottons) 30 °C and press ( Start/ Reload). After approx. 10 minutes, press

(Start/ Reload ) to pause the programme. Once the required soaking time has elapsed, press ( Start/ Reload) again to continue the programme, or select a different programme.

Starch

Laundry should not be treated with fabric softener.

Starching is possible in all wash programmes if liquid starch is used. Pour the starch in accordance with the manufacturer's instructions into fabric softener compartment ~ (rinse first if necessary).

Dyeing / Bleaching

Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye manufacturer's instructions. Do not use the washing machine for bleaching clothes.

Outdoor

Laundry must not be treated with fabric softener.

Special detergent is available for machine washing, particularly in sports shops. Dosage according to the manufacturer's instructions. Place the special detergent for outdoor clothing in compartment II

Turn the programme selector to Outdoor . Press Temperature and ( Start/ Reload).

Insert for liquid detergent

depending on model

Position the insert for dispensing liquid detergent:

– Remove the detergent drawer completely a page 9

– Slide the insert forwards and click into place.

Do not use the insert (slide upwards): for gel detergents and washing powder, for programmes with + Forvask (Prewash) and End time option.

7

Safety instructions

– Carefully read the instruction manual and the information enclosed, and act accordingly.

– Keep the machine's documentation for future reference.

Risk of electric shock!

– Never pull the cable to disconnect the mains plug!

– Never insert/disconnect the mains plug with damp hands.

Danger to life!

Danger of suffocation!

Risk of poisoning!

Risk of explosion!

For worn-out appliances:

– Disconnect the mains plug.

– Sever the mains cable and discard along with the plug.

– Destroy the lock on the washing machine door. This will prevent children from locking themselves in and risking their lives.

– Keep packaging, film and packaging parts out of the reach of children.

– Keep detergents and care products out of the reach of children.

Risk of injury!

– Items of laundry pretreated with cleaning agents containing solvents, e.g. stain remover/cleaning solvent may lead to an explosion after being loaded into the washing machine.

Rinse items of laundry thoroughly by hand beforehand.

– The washing machine door may become very hot.

– Be careful when draining hot detergent solution.

– Do not climb onto the washing machine.

– Do not lean on the open washing machine door.

– Do not reach into the drum if it is still rotating.

– Be careful when opening the detergent drawer while the machine is in operation.

Consumption values

depending on model

Programme

Bomuld 20 °C

Bomuld 30 °C

Bomuld 40 °C*

Bomuld 60 °C

Load

8 kg

8 kg

8 kg

8 kg

Electricity ***

0.37 kWh

0.40 kWh

1.05 kWh

1.15 kWh

Water ***

68 l

68 l

68 l

68 l

Programme duration ***

2 ½ h

2 ½ h

2 B h

2 B h

2 B h

1 B h

Bomuld 90 °C

Strygelet 40 °C*

8 kg

3.5 kg

2.30 kWh

0.64 kWh

80 l

55 l

Mix 40 °C

Finvask/Silke 30 °C

3.5 kg

2 kg

0.54 kWh

0.19 kWh

47 l

34 l

1 h

B h

B h Uld-/håndvask 30 °C 2 kg 0.17 kWh 39 l

* Programme setting for testing in accordance with valid standard EN60456.

Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.

Programme

Additional function

Load

Annual energy consumption

Annual water consumption

Bomuld 40/60 °C ecoPerfect ¢ ** 8/4 kg 179 kWh 8700 l

** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).

*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient temperature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional functions.

8 r

§ ³Å

§ ›É

§ ³µ

§ ›´

© ³¯ s a a a a a

1 a a a ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ

1

â a a a a a a a a a a a a a a

¢

B

B

B

B

B

B

Care and cleaning

– Risk of electric shock!

Disconnect the mains plug.

– Risk of explosion!

Do not use solvents.

Before the first wash

Do not put laundry in the machine! Turn on the tap. Put into compartment II:

– approx. 2 litres of water

– detergent (measure according to the manufacturer's instructions for lightly soiled laundry and water hardness)

Turn the programme selector to Strygelet (Easy-Care) 60 °C and press turn the programme selector to Fra (Off) .

( Start/ Reload) . At the end of the programme,

Machine housing, control panel

– Remove detergent and cleaning agent residue.

– Wipe with a soft, damp cloth.

– Do not wash the machine with a jet of water!

Cleaning the detergent drawer ...

... if it contains detergent or fabric softener residues.

1.

Pull out, press insert down and remove drawer completely.

2.

To remove the insert: press upwards from below with your finger.

3.

For models with insert for liquid detergent:Slide the insert upwards and remove it from the back.

4.

Clean the detergent dispenser tray and inserts with water and a brush and dry them.

5.

Attach the insert and engage (connect the cylinder to the guide pin).

6.

Push in the detergent drawer.

Leave the detergent drawer open so that any residual water can evaporate.

Drum

Leave the washing machine door open so that the drum can dry out.

For rust stains, use chlorine-free cleaning agent, not steel wool.

Descaling

Ensure there is no laundry in the machine!

This will not be necessary if the correct dosage of detergent is used. If it is, descale the appliance according to the manufacturer's instructions. Descaling products can be acquired on the website or from customer services a Installation instructions .

Emergency release

e.g. in the event of a power cut

The programme continues to run when the power has been restored. However, if the laundry has to be removed, the washing machine door can be opened as follows:

Risk of scalding!

The detergent solution and laundry may be hot. Let it cool.

Do not reach into the drum if it is still rotating.

Do not open the washing machine door if water can be seen through the glass.

1.

Turn the programme selector to Fra (Off) and disconnect the mains plug.

2.

Drain the detergent solution a page 10 .

3.

Pull the emergency release downwards with a tool and release.

The washing machine door can then be opened.

Information on the display panel

depending on model r flashes Close the washing machine door properly; laundry may be caught.

§ : ³Å ,

§ : ›É

Turn on the (cold water) tap fully, supply hose kinked or trapped;

Clean the filter a page 10 , water pressure too low.

§ : ³µ – Detergent solution pump blocked; Clean the detergent solution pump a page 10.

– Drainage hose / waste pipe blocked; Clean the drainage hose at the siphon a page 10 .

– Heavy foam build-up a page 11 , status indicator 1 flashes.

§ : ›´

© : ³¯

Water in the base tub, appliance leaking. Call customer services!

– Open the (hot water) tap fully.

– Inlet hose kinked/trapped.

– Water pressure too low. Clean the filter a page 10 .

– Hot water hose not connected; appliance will operate using cold water only. Ignore information, only for first wash cycle.

s Childproof lock activated: to deactivate a page 5 .

Maintenance

– Risk of burning!

Allow the detergent solution to cool.

– Turn off the tap.

Detergent solution pump

Turn the programme selector to Fra (Off) and disconnect the mains plug.

1.

Using a screwdriver or the insert for liquid detergent

(depending on model), open and remove the service flap.

2.

Remove the folding gutter and place a large enough container underneath .

3.

For models with a drainage hose: Remove the drainage hose from the retainer and pull it from the housing.

Remove the sealing cap, allow the detergent solution to flow out into the container. Replace the sealing cap and place the drainage hose in the retainer.

3* For models without a drainage hose: Carefully unscrew the pump cover 180° or until the detergent solution begins to flow out on the folding gutter. When the container is full, close the pump cover and empty the container. Repeat the above steps until all the detergent solution has completely drained out.

4.

Carefully unscrew the pump cover (there may be residual water).

5.

Clean the interior, pump cover thread and pump housing (the impeller in the detergent solution pump must rotate).

6.

Replace the pump cover and screw it tightly.

7.

Return the drainage hose (depending on model) and the folding gutter to their start position.

8.

Place the service flap back on and close.

To prevent unused detergent from flowing straight into the drain during the next wash:

Pour 2 litres of water into compartment II and then start the Udpumpning (Empty) programme.

Drainage hose at the siphon

Turn the programme selector to Fra (Off) and disconnect the mains plug.

1.

Loosen the hose clamp, carefully remove the drainage hose (residual water).

2.

Clean the drainage hose and siphon connecting piece.

3.

Reattach the drainage hose and secure the connection with the hose clamp.

Filter in the water supply

Risk of electric shock!

Do not immerse the Aqua-Stop safety device in water (contains an electric valve).

Reduce the water pressure in the supply hose:

1.

Turn off the tap.

2.

Select any programme (except Skyl/Centrifugering (Rinse/Spin) // Udpumpning

(Empty) ).

3.

Choose ( Start/ Reload). Let the programme run for approximately 40 seconds.

4.

Turn the programme selector to Fra (Off) . Disconnect the mains plug.

Clean the filter:

5.

D isconnect the hose from the tap.

Clean the filter using a small brush. and/or for Standard and Aqua-Secure models:

Remove the hose on the rear of the appliance.

Remove the filter with pliers and clean.

6.

Connect the hose and check for leaks.

10 ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ 1

â a a a a a a a a a a a a a a

¢

B

B

B

B

B

B r

§ ³Å

§ ›É

§ ³µ

§ ›´

© ³¯ s a a a a a

1 a a a

What to do if...

ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ ʑ

Water is leaking out

No water supply.

Detergent not dispensed.

The appliance door will not open.

The selected programme does not start.

Detergent solution is not drained.

– Attach/replace the drainage hose correctly.

– Tighten the screw connection of the supply hose.

– ( Start/Reload ) not selected?

– Tap not turned on?

– Filter blocked? Clean the filter a page 10 .

– Supply hose kinked or trapped?

– Safety function active. Programme stopped? a page 4 .

– (without final spin) selected? a page 3, 4 .

– Can be opened by emergency release only? a page 9 .

– Door locked after the washing machine is switched off: Switch on the washing machine and wait for 5 seconds.

– ( Start/Reload ) or (Ready in) time selected?

– Washing machine door closed?

– Childproof lock active? Deactivate a page 5 .

– (without final spin) selected? a page 3, 4 .

– Clean the detergent solution pump a page 10 .

– Clean the waste pipe and/or drainage hose.

– Not a fault. Water remains inside below the visible area.

No water can be seen in the drum.

Spin result not satisfactory.

Laundry wet/too damp.

– Not a fault. Spin control system has stopped the spin cycle. Uneven distribution of laundry.

Distribute large and small items of laundry evenly in the drum.

â

(Reduced Ironing) selected? a page 5 .

– Selected speed too low? a page 5 .

Programme duration changes suddenly during operation.

Spin cycle performed several times.

– Not a fault. The program time can vary according to the distribution of laundry, with it therefore being possible for the display panel to show adjustments in the duration.

– Not a fault. The balance control system has detected an imbalance and is attempting to redress this by repeating the spin.

Residual water in the compartment for care products.

– Not a fault: the action of the care product is not affected.

– Clean the compartment if necessary a page 9 .

Odour formation in the washing machine.

– Run programme Bomuld (Cottons) 90 °C without laundry. Use standard detergent.

Status display 1 flashing.

Appliance has detected a detergent overload.

– Too much detergent used?

If foam is escaping from the detergent drawer: mix 1 tablespoon of fabric softener with ½ litre of water and pour into compartment fabrics) .

II (not with outdoor or down

– Reduce the detergent dosage for the next wash cycle.

Intense noise formation, vibrations and "wandering" during the spin cycle.

Display panel/indicator lamps remain turned off while the machine is working.

– Are the appliance feet fixed?

Secure the appliance feet a Installation instructions .

– Transportation safety devices removed?

Remove transportation safety devices a Installation instructions .

– Energy-saving mode a page 5 .

– Power cut?

– Fuses triggered? Reset/change the fuse.

– If the fault occurs repeatedly, call customer services.

Programme sequence longer than usual.

Detergent residues on the laundry.

– Not a fault. Unbalanced load detection system adjusts imbalance by repeatedly distributing the laundry.

– Not a fault: foam detection system active; adds an additional rinse cycle.

– Occasionally, phosphate-free detergents contain water-insoluble residues.

– Select Skyl/Centrifugering (Rinse/Spin) or brush out the laundry after washing.

If you cannot correct a fault yourself or if a repair is necessary:

– Turn the programme selector to Fra (Off) and remove the mains plug from the socket.

– Turn off the water supply and call customer services a Installation instructions.

11

Observe the safety instructions on page 8!

Washing

Machine

Instructions for use

Read these instructions and the separate installation instructions before operating the washing machine.

en

advertisement

Related manuals