Siemens WT48Y7W9II/16 iQ800 Tumble dryer Instruction manual

Add to My manuals
44 Pages

advertisement

Siemens WT48Y7W9II/16 iQ800 Tumble dryer Instruction manual | Manualzz

Tumble dryer

WT48Y7W9II

siemens-home.com/welcome

en

,QVWDOODWLRQDQGRSHUDWLQJLQVWUXFWLRQV

ens-home.com/welcome

Register your product online

Your new tumble dryer

You have opted for a tumble dryer manufactured by Siemens.

Please take a few minutes to read and become familiar with the advantages of your tumble dryer.

To meet the high quality demands required by Siemens, every tumble dryer that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition.

For more information on our products, accessories, replacement parts and services, see our website www.siemenshome.com or contact our Customer

Service centres.

If the operating and installation instructions describe different models, any differences will be pointed out at the relevant points in the text.

Read these operating and installation instructions before operating the tumble dryer.

Display rules

: Warning!

This combination of symbol and signal word indicates a possibly dangerous situation. Not heeding the warning can cause death or injuries.

Caution!

This signal word indicates a possibly dangerous situation. Not heeding the caution can cause property and/or environmental damage.

Note/tip

Information about the optimum use of the appliance/any other useful information.

1. 2. 3. / a) b) c)

The steps are represented by numbers or letters.

/ -

Lists are represented by a small box or a dash.

2

en

Contents

en Installation and operating instructions

8

Intended use. . . . . . . . . . . . . . . . .4

(

Safety instructions . . . . . . . . . . .4

Children/people/pets . . . . . . . . . . . . . 4

Installation. . . . . . . . . . . . . . . . . . . . . . 6

Operation . . . . . . . . . . . . . . . . . . . . . . 7

Cleaning/Maintenance . . . . . . . . . . . 10

7

Environmental protection . . . . .11

Packaging/old appliance . . . . . . . . . 11

Coolant . . . . . . . . . . . . . . . . . . . . . . . 11

Energy-saving tips. . . . . . . . . . . . . . . 12

5

Installation and connection . . .12

Scope of delivery . . . . . . . . . . . . . . . 12

Installing and connecting the dryer. . 12

Changing the condensation drain. . . 13

Changing the side

on which the door is hinged . . . . . . . 15

Optional accessories . . . . . . . . . . . . 19

Transport and frost protection . . . . . 19

Y

The main points in brief . . . . . .20

*

Getting to know

your appliance . . . . . . . . . . . . . .21

Dryer. . . . . . . . . . . . . . . . . . . . . . . . . 21

Control panel . . . . . . . . . . . . . . . . . . 22

Display panel . . . . . . . . . . . . . . . . . . 23

Z

Laundry . . . . . . . . . . . . . . . . . . .24

Preparing the laundry . . . . . . . . . . . . 24

Sorting washing according to: . . . . . 24

/

Programmes and buttons . . . . .25

Programmes . . . . . . . . . . . . . . . . . . . 25

Buttons . . . . . . . . . . . . . . . . . . . . . . . 26

1

Operating the appliance . . . . . . 28

Loading laundry

and switching on the dryer . . . . . . . .28

The basket for woollens . . . . . . . . . .28

Drying with the basket for woollens. .29

Setting a programme. . . . . . . . . . . . .30

Starting the programme . . . . . . . . . .30

Programme sequence . . . . . . . . . . . .31

Changing the programme

or adding laundry . . . . . . . . . . . . . . .31

Cancelling the programme . . . . . . . .31

Programme end . . . . . . . . . . . . . . . .31

Removing laundry

and switching off the dryer . . . . . . . .31

Clean the fluff filter . . . . . . . . . . . . . .31

Emptying the condensate container .33

>

Noises . . . . . . . . . . . . . . . . . . . . 34

D

Cleaning . . . . . . . . . . . . . . . . . . . 35

Cleaning the dryer

and the control panel . . . . . . . . . . . .35

Cleaning the moisture sensor . . . . . .35

Cleaning the filter

in the condensate container . . . . . . .36

3

Faults and what

to do about them . . . . . . . . . . . . 37

J

After-sales service . . . . . . . . . . 39

[

Consumption values . . . . . . . . . 40

Consumption values table . . . . . . . . .40

Most efficient programme

for cotton fabrics . . . . . . . . . . . . . . . .40

J

Technical data . . . . . . . . . . . . . . 41

3

en Intended use

8

Intended use

This appliance is intended for private domestic use only.

Do not install or operate this appliance anywhere that is liable to experience frost and/or outdoor conditions. There is a risk that the appliance will be damaged if residual water in it freezes. If hoses freeze up, they may crack/burst.

This appliance must only be used for drying and freshening up domestic laundry, consisting of items that have been washed with water and are suitable for tumble drying (see label on item). Using the appliance for any other purpose is outside of the scope of its intended application and is forbidden.

This appliance is intended for use up to a maximum height of

4000 metres above sea level.

Before you switch on the appliance:

Check that there is no visible damage to the appliance. Do not operate the appliance if it is damaged. Should you have any problems, please contact your specialist dealer or our customer service.

Read and follow the operating and installation instructions and all other information provided with this appliance.

Retain the documents for subsequent use or for subsequent owners.

(

Safety instructions

The following safety information and warnings are provided to protect you from injury and to prevent material damage to your surroundings.

It is nevertheless important to take the necessary precautions and to proceed with care when installing, maintaining, cleaning and operating the appliance.

Children/people/pets

: Warning

Risk of death!

Children and other people who are unable to assess the risks involved when using the appliance may injure themselves or may find themselves in life-threatening situations. Therefore please note:

The appliance may be used by children over the age of 8 years and by persons with reduced physical, sensory or mental capacity or by persons with a lack of experience or knowledge as long as they are supervised or have received instruction on how to use the appliance safely and they have understood the potential risks of using the appliance.

Children must not play with this appliance.

4

Do not allow children to clean or maintain this appliance unsupervised.

Keep children under 3 years and pets away from this appliance.

Do not leave the appliance unattended when children or other people who are unable to assess the risks are in the vicinity.

: Warning

Risk of death!

Children may lock themselves inside appliances and find themselves in a life-threatening situation.

Do not position the appliance behind a door, as this may obstruct the appliance door or prevent it from opening completely.

Once an appliance has reached the end of its life, pull the mains plug from the socket before severing the mains cable, and then destroy the lock on the appliance door.

: Warning

Risk of suffocation!

If allowed to play with the packaging/plastic film or packing components, children may become caught in these or pull them over their heads and suffocate.

Safety instructions en

Keep packaging, plastic film and packing components away from children.

: Warning

Risk of poisoning!

Detergents and care products may result in poisoning if consumed.

If accidentally swallowed, seek medical advice. Keep detergents and care products out of the reach of children.

: Warning

Eye/skin irritation!

Contact with detergents or care products may cause eye/skin irritation.

Rinse eyes/skin thoroughly if they/it come(s) into contact with detergents or care products. Keep detergents and care products out of the reach of children.

5

en Safety instructions

Installation

: Warning

Risk of electric shock/fire/ material damage/damage to the appliance!

If the appliance is not installed properly, this may lead to a dangerous situation. Make sure that:

The mains voltage on your power socket matches the rated voltage specified on the appliance (identification plate). The connected loads and the required fuse protection are specified on the identification plate.

The appliance is only connected to a source of alternating current via a nationally recognized and grounded outlet that has been correctly installed.

The mains plug and the grounded socket match and the earthing system has been correctly installed.

The cross section of the cable is sufficiently large enough.

The mains plug is accessible at all times.

If using a residual current circuit breaker, only use one that bears the following mark: z

. The presence of this mark is the only way to be sure that it fulfils all the applicable regulations.

: Warning

Risk of electric shock/fire/ material damage/damage to the appliance!

If the appliance's mains cable is altered or damaged, this may result in electric shock, short circuiting or fire due to overheating.

The mains cable must not be kinked, crushed or altered, and must not come into contact with any heat sources.

: Warning

Risk of fire/material damage/ damage to the appliance!

The use of extension cords or power strips may result in fire due to overheating or short circuiting.

Connect the appliance directly to an earthed socket that has been correctly installed. Do not use extension cords, power strips or multi-way couplers.

: Warning

Risk of injury/material damage/damage to the appliance!

The appliance may vibrate or move when in operation, potentially resulting in injury or material damage.

Place the appliance on a clean, even, solid surface and, using a spirit level to guide you, level it with the screw-in feet.

Risk of injury/material damage/damage to the appliance!

6

Incorrectly placing (stacking) this appliance on top of a washing machine may result in injury, material damage and/or damage to the appliance.

If this appliance is to be placed on top of a washing machine, the washing machine must be of at least the same depth and width as the appliance, and it must be secured in place with the appropriate connection set if available.

~ Page 19

The appliance MUST be secured with this connection set.

Stacking the appliance in any other way is forbidden.

If you take hold of any of the appliance's protruding parts

(e.g. the appliance door) in order to lift or move it, these parts may break off and cause injury.

Do not take hold of any of the appliance's protruding parts in order to move the appliance.

Safety instructions en

: Warning

Risk of injury!

The appliance is very heavy.

Lifting it may result in injury.

Do not lift the appliance on your own.

The appliance has sharp edges on which you could cut your hands.

Do not take hold of the appliance by its sharp edges. Wear protective gloves to lift it.

If the hoses and mains cables are not correctly routed, they may constitute a tripping hazard, which may result in injury.

Route hoses and cables such that they do not constitute a tripping hazard.

Operation

: Warning

Risk of explosions/fire!

Laundry that has come into contact with solvents, oil, wax, wax remover, paint, grease or stain remover may ignite when dried in the machine, or even cause the appliance to explode.

Therefore please note:

Rinse the laundry thoroughly with warm water and detergent before drying it in the machine.

Do not place laundry in this appliance to be dried if the laundry has not been washed first.

7

en Safety instructions

Do not use the appliance if industrial chemicals have been used to clean the laundry.

: Warning

Risk of explosions/fire!

If there is any residual material left in the fluff filter, this may ignite when drying is in progress, or even cause the appliance to catch fire or explode.

Clean out the fluff filter each time the appliance is used to dry laundry.

Certain objects may ignite when drying is in progress, or even cause the appliance to catch fire or explode.

Remove any lighters or matches from pockets on items of clothing.

If there is coal dust or flour in the air around the appliance, this may cause an explosion.

Make sure that the area around the appliance is kept clean when it is in operation.

: Warning

Risk of fire/material damage/ damage to the appliance!

If a program is terminated before the drying cycle has finished, this prevents the laundry from cooling down sufficiently and may cause the laundry to ignite, or may result in material damage or damage to the appliance.

During the last part of the drying cycle, the laundry in the drum is not heated

(cooling cycle). This is to ensure that it remains at a temperature at which it will not be damaged.

Do not switch off the appliance before the drying cycle has finished unless you remove all items of laundry from the drum immediately and spread them out (to dissipate the heat).

: Warning

Risk of poisoning/material damage!

Condensation water is not suitable for drinking and may be contaminated with lint.

Contaminated condensation water may be hazardous to health and may cause material damage.

Do not drink or reuse.

: Warning

Risk of poisoning!

Poisonous fumes may be given off by cleaning agents that contain solvents, e.g. cleaning solvent.

Do not use cleaning agents that contain solvents.

8

: Warning

Risk of injury!

If you support your weight/sit on the appliance door when it is open, the appliance may tip over, which may result in injury.

Do not support your weight on the appliance door when it is open.

If you climb onto the appliance, the worktop may break, which may result in injury.

Do not climb onto the appliance.

If you reach into the drum while it is still rotating, you risk injuring your hands.

Wait until the drum has stopped rotating.

Caution!

Material damage/damage to the appliance

If the amount of laundry in the appliance exceeds its maximum load capacity, it may not be able to operate properly, or this may result in material damage or damage to the appliance.

Do not exceed the maximum load capacity of dry laundry.

Make sure you comply with the maximum load capacities specified for each of the programs.

~ Page 25

Material damage/damage to the appliance

Safety instructions en

If you operate the appliance without a fluff filter, or if the fluff filter is defective, this may result in damage to the appliance.

Do not operate the appliance without a fluff filter, or with a fluff filter that is defective.

Light objects such as hair and lint may be sucked into the air inlet when the appliance is in operation.

Keep these away from the appliance.

Foam and foam rubber may deform or melt if dried in the appliance.

Do not dry laundry items that contain foam or foam rubber in the appliance.

If you pour the wrong quantity of detergent or cleaning agent into the appliance, this may result in material damage or damage to the appliance.

Use detergents/care products/cleaning agents and softeners in accordance with the manufacturers' instructions.

Material damage/damage to the appliance

9

en Safety instructions

If the appliance overheats, it may not be able to operate properly, or this may result in material damage or damage to the appliance.

Make sure that the appliance's air inlet is never obstructed when the appliance is in operation, and that the area around the appliance is adequately ventilated.

Cleaning/Maintenance

: Warning

Danger of death!

The appliance is powered by electricity. There is a risk of electric shock if you come into contact with live components.

Therefore please note:

Switch off the appliance.

Disconnect the appliance from the power supply (pull out the plug).

Never take hold of the mains plug with wet hands.

When removing the mains plug from the socket, always take hold of the plug itself and never the mains cable, otherwise this may damage the mains cable.

Do not make any technical modifications to the appliance or its features.

Repairs and any other work on the appliance must only be conducted by our customer service or by an electrician. The same applies for replacing the mains cable

(when necessary).

Spare mains cables can be ordered from our customer service.

: Warning

Risk of poisoning!

Poisonous fumes may be given off by cleaning agents that contain solvents, e.g. cleaning solvent.

Do not use cleaning agents that contain solvents.

: Warning

Risk of electric shock/material damage/damage to the appliance!

If moisture penetrates the appliance, this may cause it to short circuit.

Do not use a pressure washer or steam cleaner to clean your appliance.

10

: Warning

Risk of injury/material damage/damage to the appliance!

The use of spare parts and accessories supplied by other brands is dangerous and may result in injury, material damage or damage to the appliance.

For safety reasons, use genuine spare parts and accessories only.

Caution!

Material damage/damage to the appliance

Cleaning agents and agents for pretreating laundry (e.g. stain removers, prewash sprays, etc.) may cause damage if they come into contact with the surfaces of the appliance.

Therefore please note:

Do not allow these agents to come into contact with the surfaces of the appliance.

Clean the appliance with nothing but water and a soft, damp cloth.

Remove any detergent, spray or other residues immediately.

Environmental protection en

7

Environmental protection

Packaging/old appliance

) Dispose of packaging in an environmentally-responsible manner.

This appliance is labelled in accordance with European

Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment - WEEE).

The guideline determines the framework for the return and recycling of used appliances as applicable throughout the

EU.

Coolant

The dryer's heat exchanger contains fluorinated greenhouse gas in a hermetically sealed unit.

Greenhouse gas:

Filling quantity (kg):

Total GWP (tCO

2

):

R134a

0,280

0,400

Dispose of the dryer properly.

11

en Installation and connection

Energy-saving tips

Spin the laundry before drying.

The drier the laundry, the shorter the drying time will be, thus consuming less energy.

Load the dryer with the maximum load.

Note: Do not exceed the maximum load for the programs, as this prolongs the drying time and increases energy consumption.

Ventilate the room and keep the air inlet on the dryer free to ensure air exchange.

Clean the fluff filter after each drying cycle. If the fluff filter is dirty, the drying time is prolonged and energy consumption is increased.

Energy saving mode : If the dryer is not operated for a prolonged period, it automatically switches off before the program starts and when the program has ended to save energy. The display panel and indicator lamps go off after a few minutes and the Start button flashes. To activate the lighting, press any button, open or close the dryer door or turn the program selector.

5

Installation and connection

Scope of delivery

Dryer

Installation and operating instructions

Basket for woollens *

Condensation drain*

Installing and connecting the dryer

:

Warning

Risk of death!

There is a risk of electric shock as the dryer is operated with electricity.

Check the dryer for visible damage.

You must not operate the dryer if it is damaged.

Before connecting the dryer to the power supply, ensure that the electric voltage specified on the rating plate matches the voltage of your socket.

Only use residual current circuit

■ breakers with the following symbol: z

.

Ensure that the mains cable is not kinked or trapped and that it does not come into contact with heat sources or sharp edges.

:

Warning

Children could lock themselves in the dryer, putting their lives at risk!

Do not set up the dryer behind a door or sliding door as this may obstruct the dryer door or prevent it from opening.

Caution!

Risk of injury

As the dryer is heavy, you could injure yourself by trying to lift it.

Do not lift the dryer on your own.

* Depending on the model

12

You could cut your hands on the sharp edges of the dryer. Do not hold the dryer by the sharp edges.

Protruding parts on the dryer may break off when it is lifted or pushed.

Do not move the dryer by holding on to protruding parts.

Caution!

Risk of material damage to the dryer or fabrics

Check the dryer for damage caused

■ during transportation. Never operate a dryer if it is damaged.

Any residual water in the dryer may freeze and damage the dryer. Do not install the dryer in rooms that are at risk of frost.

During installation ensure that:

The dryer is placed on a clean, level and firm surface,

The mains plug can be accessed at all times,

The air inlet on the dryer is kept clear and there is sufficient ventilation,

The area around the dryer is kept clean and

The dryer is levelled using the threaded feet.

Note: Check the alignment of the appliance with a spirit level and correct if necessary. Change the height by turning the appliance feet.

All appliance feet must stand firmly on the ground.

Changing the condensation drain

Notes

The condensation from the dryer can

Installation and connection en either be discharged into the condensation container or drained off via a connection to the wastewater system. By default, the condensation from the dryer is discharged into the condensation container.

If the condensation drain is installed, residual water remains in the condensation container due to the dryer's self-cleaning function.

Proceed as follows to change the condensation drain:

1.

Remove the accessories from the dryer drum.

2.

When the dryer is delivered from the factory, the hose for discharging the condensation into the condensation container is fastened to the connecting piece.

3.

Disconnect the hose from the connecting piece and put it in the

"parked" position.

Incorrect alignment may cause high noise levels, vibrations and improper movement of the drum.

Note: If in doubt, have the appliance connected by a specialist.

13

en Installation and connection

4.

Take the drain hose from the accessories and secure it to the free connecting piece.

5.

Fasten the other end of the drain hose with the remaining accessories, depending on the connection situation (A, B or C).

&

$

$

$

&

&

%

Caution!

Accumulated water can be drawn back into the dryer and may cause material damage.

Check that the water drains away from the wash basin quickly. The drain must not be sealed or blocked.

Caution!

Material damage due to leaks or draining water.

Secure the drain hose so that it cannot slip out.Do not kink the drain hose.

Ensure that a height difference of max. 100 cm and min. 80 cm between the installation surface and the drain is maintained for drainage into a siphon.

14

6.

Pull out the condensation container fully.

Installation and connection en

9.

Slide in the condensation container until it clicks into place.

7.

Turn the condensation container

180° onto its underside and remove the stopper that is fitted.Turn the condensation container back over and insert the stopper into the recess in the top of the condensation container.

8.

Pull the filter out of the lock-in slot and place it into the recess in the top of the condensation container.

The condensation is now discharged via the drain hose into the waste-water system or into a wash basin

Note: If you want to change the condensation drain back to the condensation container, carry out all these steps in reverse order.

Changing the side on which the door is hinged

Proceed as follows to change the side on which the door is hinged:

1.

Set the programme selector to the

"Off" position, disconnect the dryer from the mains and open the door.

15

en Installation and connection

2.

Remove the screws from the dryer and then remove the dryer door.

Note: Use a T20 (Torx) screwdriver only. Do not use any other tools to change the side on which the door is hinged.

5.

Remove the screws from the door handle on the dryer door and remove the door handle.

6.

Unlock the door ring.

3.

Carefully place the dryer door onto a flat surface, and place a hand towel or other such item between the door and the surface to avoid scratching or damaging the door.

7.

Now lift the dryer door from the door ring. Rotate the dryer door and place it back onto the door ring in the corresponding place.

4.

Now remove the screws from the door hinge, and remove the hinge from the dryer door.

8.

Remove the screws from the top and bottom of the dryer door.

16

9.

Remove the rings from the dryer door.

Installation and connection en

14.

Put the door hinge and door handle in place as shown in the picture, and screw them back onto the dryer door.

10.

Swap the rings around.

11.

Press the rings onto the dryer door.

12.

Screw the rings tightly back onto the dryer door.

15.

Remove the cover from the door lock on the dryer and place it to one side.

13.

Lock the door ring back in place.

16.

Remove the door lock.

17

en Installation and connection

17.

Insert the door lock (1.) on the other side of the dryer and screw the cover (2.) back on.

18.

Now also screw the dryer door back on.

19.

You can now reconnect the dryer, close the door and start a programme.

18

Optional accessories

Order optional accessories * from the after-sales service:

Washer-dryer stack connection set:

To save space, the dryer can be placed on top of a suitable washing machine of the same width and depth.

The dryer must be secured to the washing machine using this connection set.

Order number with pull-out worktop:

WZ20400 ;

Order number without pull-out worktop: WZ11410 .

Platform:

For easier loading and unloading, raise your dryer with a platform.

Transport laundry with the clothes basket integrated into the platform drawer.

Order number: WZ20500 .

Installation and connection en

Transport and frost protection

1.

Empty the condensate container.

2.

Select any programme using the programme selector.

3.

Press the Start button.

4.

Wait for 5 minutes.

Note: The condensation is drained.

5.

Empty the condensate container again.

6.

Switch off the dryer.

Note: Despite draining, there will always be some residual water in the dryer.

Caution!

Any residual water may leak out and cause material damage.

Transport the dryer in an upright position.

Caution!

The dryer contains coolant and may be damaged.

Allow the dryer to rest for two hours before initial use.

* Depending on the model

19

en The main points in brief

Y

The main points in brief

1 @ @

-------2

Load the laundry and close the door.

@

Switch the dryer on.

@

Select a programme, and adjust the programme presettings as needed.

-------3

Select the start button Ü .

@

Dry.

@

Unload the laundry.

--------

Switch the dryer off.

Empty the condensation container.

Clean the fluff filter.

20

Getting to know your appliance en

*

Getting to know your appliance

Dryer

#

+

3

( Condensate container

0 Control and display panel

8 Drum interior light (depending on the model)

@ Dryer door

H Air inlet

P Fluff filter

21

en Getting to know your appliance

Control panel

+

( Programmes

~ Page 25 .

0 Programme selector and On/Off button .

8 Display panel with buttons

~ Page 22 .

@ Start button for starting, interrupting or cancelling the programme.

H Buttons

~ Page 26 .

#

22

Getting to know your appliance en

Display panel

# +

Button

Button Description

( Select the dryness level .

Display

Ø Iron Dry e Cupboard Dry e

+ Cupboard Dry Plus

0

8

Select

Select

Anti-Crease

Ready in .

.

120

Anti-Crease function in minutes

1:40

Expected programme duration in hours and minutes or timed programme selected

3 h

Programme delay in hours when "Ready in" time is selected

@

H

Select

Select

Settings 3 sec

Options .

.

End signal

Button signal

Automatic switch-off

Language

Ú Spin class

Û Fine adjustment of the dryness level

Ù Low heat

For a detailed description of all buttons, see

~ Page 26 onwards.

Other displays

Display

Heat exchanger is being rinsed

Please empty the condensate container

Please clean the fluff filters w

Pause , Ready/Anti-Crease

Description

The heat exchanger is cleaned automatically.

Empties the condensate container;

~ Page 33

.

Cleans the fluff filters;

~ Page 31 .

Childproof lock; ~ Page 26 .

Programme progress: Anti-Crease; End and Pause

23

en Laundry

Z

Laundry

Preparing the laundry

:

Warning

Risk of explosion/fire!

Remove any cigarette lighters and matches from pockets.

Caution!

The dryer drum and fabrics could be damaged.

Remove all objects from pockets and observe the following information:

Tie cloth belts, apron strings, etc.

■ together or use a laundry bag.

Close zips, hooks and eyelets and buttons. Button up large items of laundry, such as covers.

Remove any metal objects, such as paper clips, from pockets.

To ensure a consistent drying result, sort laundry by fabric type and

■ drying programme.

Always dry very small items of laundry, e.g. babies' socks, together with large items such as towels.

Knitted fabrics such as T-shirts and jerseys often shrink the first time they are tumble-dried. Use a gentle programme.

Do not overdry easy-care laundry.

This increases creasing of the laundry.

Use timed programmes for single garments.

Some detergents and care products, e.g. starch or softeners, contain particles which may be deposited on the moisture sensor. This may impair the sensor function and in consequence the drying result.

Notes

– When washing laundry to be tumble-dried, use the correct amount of detergent and care products as specified in the manufacturer's instructions.

– Clean the moisture sensor

regularly ~ Page 35 .

Sorting washing according to: c

Suitable for tumble drying a

Dry at normal temperature

`

Dry at low temperature b

Do not tumble-dry

Note: Do not load laundry from the washing machine directly into the tumble dryer. Sort the spun laundry before placing it in the dryer drum.

If you dry thin, thick and multi-layer fabrics together, they will dry to differing degrees. To achieve an even drying result, you should therefore only dry together laundry of the same type of fabric and structure. If you feel that the laundry is still too damp, you can select a timed programme for subsequent drying

~ Page 25 .

Caution!

Possibility of material damage to the dryer or laundry.

Do not tumble-dry the following fabrics:

Laundry contaminated with oil.

Unwashed fabrics.

Non-breathable fabrics (e.g. rubbercoated).

Easily damaged fabrics such as silk, synthetic curtains.

24

Programmes and buttons en

/

Programmes and buttons

Programmes

Programme and fabrics

Name of the programme

Which fabrics is the programme suitable for?

Cotone (Cottons)

Hard-wearing fabrics, heat-resistant fabrics made of cotton or linen.

Sintetici (Easy-Care)

Synthetic or blended fabrics.

Mix

Mixed load consisting of cotton and synthetic fabrics.

Scarpe con cestello (Shoes in the basket)

Shoes

Note: Only dry the fabrics using the basket for woollens

~ Page 28 .

Lana con cestello (Woollens in the basket)

Fabrics made from wool or a wool blend that are suitable for tumble drying.

Note: Only dry the fabrics using the basket for woollens

~ Page 28 .

Asciugamani (Towels)

Hard-wearing towels made of cotton.

Prog. a tempo caldo (Time programme warm)

All types of fabric; time programme.

Suitable for pre-dried or slightly damp laundry and for drying off multi-layered, thick laundry.

Camicie (Shirts)

Non-iron shirts or blouses made of cotton, linen, synthetic fibres or blended fabrics.

Piumini (Down)

Fabrics, pillows, bedspreads or eiderdowns filled with down.

Dry large items individually.

Outdoor

Weatherproof and outdoor clothing with a membrane coating and water-repellent fabrics.

Maximum load and programme settings/info

The maximum load is based on the dry weight of the fabrics

Possible programme settings

9 kg

3.5 kg

3 kg

1 pair

1.5 kg

6 kg

3 kg

You can adjust the programme length using the Dryness level button.

1.5 kg

1.5 kg

1.5 kg

25

en Programmes and buttons

-------speed 40’ (Rapid 40)

Synthetics and light cottons.

capiScuri (Jeans/Dark Laundry)

Dark fabrics made of cotton and dark, easy-care fabrics.

Turn laundry inside-out before drying.

Coperte (Quilts)

Fabrics, pillows, quilts or bedspreads filled with synthetic fibres.

Dry large items individually. Observe the care label.

Lingerie

For delicate, washable underwear, e.g. made of velvet, lace, Lycra, silk or satin.

Buttons

2 kg

6 kg

2.5 kg

1 kg

Buttons Explanations and notes

Note: Not all buttons and their functions can be selected in all programmes.

Tipo di asciugatura

(Dryness level) :

Ò Cupboard dry plus

Select the dryness level (e.g. Cupboard Dry) or the drying time (20 mins up to 3 hrs

30 mins, depending on the model and programme).

Select the dryness level according to the laundry to be dried.

If you have selected a dryness level, this is stored for all programmes, except for Cottons, even after the dryer has been switched off.

For multi-layered, thick laundry which is difficult to dry.

± Cupboard dry

Ø Iron dry

Normal, single-layered laundry.

Normal, single-layered laundry, which should still be damp after drying and is suitable for ironing or hanging up.

stiroFacile

(Anti-Crease)

The drum moves the laundry at regular intervals for 60 to 120 minutes after drying, in any programme, to prevent creasing.

Fine fra (Ready in) The programme will end in between 1 h and 24 h. Set the "Ready in" time in increments of one hour to delay the start of the programme. The required number of hours after the programme ends is displayed on the display panel.

w Childproof lock You can activate or deactivate the childproof lock by pressing and holding the

"Ready in" button for five seconds.

26

Programmes and buttons en

--------

× Opzioni

(Options)

ø

Û

Ù

Spin class

Fine adjustment of the dryness level

Low heat

Memory 1/2

Select the button and the menu will be displayed in the display panel.

For the spin class, set the spin speed at which the laundry has been spun in the washing machine. This permits the expected drying time to be indicated more precisely. Speeds of between 600 and 1800 rpm can be selected. Default setting:

1000 rpm

If the laundry is too damp after drying, you can finely adjust the dryness levels e.g.

Cupboard Dry. The dryness level can be increased in three stages, from +1 to +3.

If you have adjusted the dryness level, the setting for all programmes with a selectable dryness level is retained even after the dryer is switched off.

Reduced temperature for delicate fabrics, e.g. polyacrylic or elastane, may increase the drying time.

You can save individual programme settings under Memory 1 and 2.

Select the required programme settings and press the Memory 1 or Memory 2 button for 3 seconds until the display panel shows that Memory programme 1 or 2 is saved. Your selected programme settings are retained even after the dryer is switched off.

Default setting: No Memory programme saved.

Press both buttons at the same time and hold them for 3 seconds. The menu will be displayed in the display panel.

Impostazioni

3 sec.

(Settings 3 sec.)

End signal, button signal

Select the button signal volume: off - quiet - normal - loud - very loud.

Default setting: loud

Automatic switch-off Automatically switching off the dryer after 15, 30 or 60 minutes, or never automatically switching off. Default setting: 15 minutes

Language

Avvio/Pausa

(Start/Pause) Ü

Select the desired language in the display panel.

Starts or pauses the programme.

27

en Operating the appliance

1

Operating the appliance

Loading laundry and switching on the dryer

Note: The dryer must be correctly positioned and connected,

~ Page 12

.

The basket for woollens

Note: The basket for woollens is supplied with your dryer * or it can be purchased as an accessory from the after-sales service.

Caution!

Risk of material damage to the dryer and fabrics.

Never operate the dryer if the basket for woollens is damaged.

#

1.

Place the laundry in the drum.

2.

Press the # buttnon to switch the dryer on.

3.

Close the dryer door.

Caution!

Possibility of material damage to the dryer or laundry.

Take care not to trap any laundry in the door.

Note: The dryer drum is lit up after the door is opened and closed and once the programme has started. The drum interior light goes out on its own.

( Basket for woollens

0 Insert for the basket for woollens

8 Recesses for mounting the basket for woollens

@ Notch for the basket for woollens

* Depending on the model

28

Drying with the basket for woollens

1.

Insert the feet of the basket for woollens into the holes on the fluff filter.

Operating the appliance en b) Pullover

2.

Lean the basket for woollens against the upper notch.

c) Sports shoes

Place sports shoes in the basket for woollens without the insert.

Pull out the tongues of the shoes and remove the insoles or heel cushions.

Roll up a towel and place it under the sports shoes to create an inclined surface. Place the shoes so that the heels are on the towel.

The basket for woollens should now be firmly inserted in the drum.

3.

Place the required fabric in the insert of the basket for woollens

Notes

– Spin the fabrics before placing them in the insert.

– Place the laundry loosely in the insert. Do not squash the fabrics.

Application examples : a) Trousers or skirt d) Soft toys

Dry soft toys in the basket for woollens without the insert.

Only place as many soft toys in the basket for woollens as is possible without any falling out.

29

en Operating the appliance

4.

Place the insert or the sports shoes in the basket for woollens.

Caution!

Risk of material damage to the fabrics.

Place the fabrics in the insert of the basket for woollens so that they do not come into contact with the drum.

Setting a programme

Note: If you have activated the childproof lock, you must deactivate it before you can set a programme, see

~ Page 26 .

1.

Select the required programme; detailed information on the programmes can be found from

~ Page 25 onwards.

5.

Use the programme selector to select the programme for the basket for woollens or a time programme.

6.

Set the drying time.

Thin woollen pullover:

Approx. 1:20 hrs

Thick woollen pullover:

Approx. 1:30 hrs - 3:00 hrs

Skirt: Approx. 1:00 hr - 1:30 hrs

Trousers: Approx. 1:00 hrs -

1:30 hrs

Gloves: Approx. 30 min

Sports shoes: Approx. 1:30 hrs/ with airing max. 2:00 hrs

Note: For thicker or multi-layered fabrics, you must extend the drying time, as required, to achieve the required level of dryness.

7.

Start the programme.

8.

Remove the fabrics and switch off the dryer.

2.

Use the programme selector to set the required programme. The default programme settings for the selected programme appear in the display panel.

Note: Default programme settings are standard settings that are already defined when a programme is selected. After selecting a programme, you can see the default programme settings in the display panel.

3.

If required, adjust the default programme settings. You can find detailed information on this from

~ Page 25 onwards.

Starting the programme

Press the Start button.

Note: If you want to lock the programme to prevent it from being adjusted inadvertently, you can select the childproof lock, see

~ Page 26 .

30

Programme sequence

The programme status is indicated in the display field.

Changing the programme or adding laundry

You can remove or add laundry and change or alter the programme at any time during drying.

1.

To pause the programme, open the dryer door or press the Start button.

2.

Add or remove laundry.

3.

Select another programme or an additional function, if required.

4.

Close the dryer door.

5.

Press the Start button.

Note: The programme duration in the display panel is updated depending on the load and residual moisture in the laundry. The values displayed may change after the programme is changed or the load is adapted.

Cancelling the programme

The programme can be interrupted at any time; to pause, open the dryer door or press the Start button.

Caution!

Risk of fire. Laundry may catch fire.

If you cancel the programme, you must remove the laundry items and spread them out so that the heat can disperse.

Programme end

FERTIG. WAESCHE ENTNEHMEN. appears in the display panel.

Operating the appliance en

Removing laundry and switching off the dryer

1.

Remove the laundry.

2.

Press the # button to switch the dryer off.

Clean the fluff filter

Note: During drying, fluff and hair from the laundry is trapped by the fluff filter. If the fluff filter is blocked or dirty, this reduces the flow of air, which prevents the dryer from achieving its maximum performance. Clean fluff filters also reduce energy consumption and the drying time.

Clean the fluff filter after each drying cycle:

1.

Open the dryer door and remove all fluff from the door.

2.

Pull out the two-part fluff filter.

31

en Operating the appliance

3.

Remove the fluff from the recess in the fluff filter.

6.

Rinse away the fluff under warm, running water.

Note: Ensure that no fluff falls into the open shaft.

4.

Pull apart the two-part fluff filter.

7.

Dry the fluff filter, close it and reinsert the two-part fluff filter.

5.

Open both filters and remove all the fluff.

Caution!

The dryer may be damaged.

Do not operate the dryer without a fluff filter or if the fluff filter is defective.

32

Emptying the condensate container

Notes

You can drain off the condensation

■ into the waste-water system using an optional condensation drain * . For installation, see

~ Page 13 .

If you drain the condensation using an optional condensation drain, you do not have to empty the condensate container.

Note: After each drying cycle, empty the condensate container; otherwise the next drying programme may be cancelled as a result of the condensate container being full.

1.

Pull out the condensate container horizontally.

Operating the appliance en

2.

Pour out the condensation water.

Caution!

Dirty condensation water may be harmful to your health and cause material damage.

Condensation water is not suitable for drinking and may be contaminated with fluff. Do not drink the condensation water or reuse it.

3.

Push in the condensate container until you feel it lock back into place in the dryer.

Note: The filter in the condensate container filters the condensation which is used during the dryer's automatic cleaning cycle. The filter is cleaned by emptying the condensation.

Nevertheless, you should check the filter regularly for remaining deposits and remove them. See

~ Page 36

.

* Depending on the model

33

en Noises

>

Noises

Note: During drying, particularly in the initial phase, operation of the appliance results in noise from the compressor and pump. This is perfectly normal and does not impair proper functioning of the appliance.

From time to time, the compressor in the dryer generates a humming noise.

However, the volume may vary depending on the programme and progress of the drying process.

The condensation is pumped into the condensate container by a pump.

This generates pumping noises.

Every now and then, the compressor is ventilated. This creates a whirring noise.

The automatic cleaning of the dryer causes a clicking sound.

34

D

Cleaning

Cleaning the dryer and the control panel

:

Warning

Risk of death!

There is a risk of electric shock as the dryer is operated with electricity.

Disconnect the dryer from the mains before cleaning.

Clean the dryer using only water and a soft, damp cloth.

Remove all detergent residue, spray residue or other residues immediately.

Do not use cleaning agents or agents for pre-treating laundry (e.g. prewash sprays, stain removers). Do not use high-pressure cleaners or steam jet cleaners to clean your appliance.

Cleaning en

Cleaning the moisture sensor

Note: The dryer is equipped with a stainless-steel moisture sensor. The moisture sensor measures how damp the laundry is.

After long periods of usage the moisture sensor may become covered by a fine layer of limescale or residues of detergents and care products. Such residues must be removed regularly as the sensor function and in consequence the drying result may be impaired.

Open the door and clean the moisture sensor with a coarse sponge.

Caution!

Moisture sensor may be damaged.

Do not clean moisture sensors with abrasives and steel wool.

35

en Cleaning

Cleaning the filter in the condensate container

Note: The filter in the condensate container cleans the condensation water that is used during the dryer's automatic cleaning cycle.

1.

Pull out the condensate container horizontally.

2.

Pour out the condensation water.

3.

Remove the filter.

4.

Clean the filter under warm, running water or in the dishwasher.

5.

Push in the filter until you feel it lock into place.

Caution!

The dryer may be contaminated with fluff and thus become damaged.

Only operate the dryer with the filter inserted.

6.

Push in the condensate container until you feel it lock into place.

36

Faults and what to do about them en

3

Faults and what to do about them

Faults Cause/remedy

Please empty the condensate container on the display panel and the drying cycle is interrupted.

Please clean the fluff filters on the display panel.

Heat exchanger is being rinsed on the display panel.

Dryer does not start.

Empty the condensate container; and the dryer; .

If the optional condensation drain* is installed, the drain hose may be blocked or kinked. Check the hose for deposits and rinse the hose. Lay the hose without any kinks.

Clean the fluff filter and press the Start button ~

Not a fault. The heat exchanger is cleaned automatically. Do not pull out the condensate container while this is displayed.

Page 31

.

Creasing.

Mains plug plugged in or fuse checked?

Programme selected? Select a programme.

Dryer door open? Close the door.

Childproof lock activated? Deactivate the childproof lock.

"Ready in" time selected? Programme starts after a delay ~ Page 26 .

Creasing occurs when you have exceeded the maximum load or selected the wrong programme for the type of fabric. All the required information

can be found in the programme table ~ Page 25 .

Remove clothes immediately after drying; creasing may occur if they are left in the drum.

Water is leaking out.

Change in the programme duration displayed during drying.

* Depending on the model

Not a fault; the dryer may be positioned on an incline. Level the dryer.

Not a fault. The moisture sensors detect the remaining moisture in the load and adjust the programme length (except timed programmes).

37

en Faults and what to do about them

Faults

Laundry is not dried correctly or is still too damp.

Cause/remedy

After the end of the programme, warm laundry feels damper than it actually is. Spread the laundry out and allow the heat to disperse.

Finely adjust the dryness level – this extends the drying time but does not

increase the temperature. Your laundry will become drier ~ Page 26 .

Select a programme with a longer drying time or increase the drying level.

This does not increase the temperature.

Select a timed programme for subsequent drying of laundry that is still damp

~ Page 25 .

If you have exceeded the maximum load for the programme, the laundry may not be dried properly.

Clean the moisture sensor in the drum. The sensor may become covered by a fine layer of limescale or residues of detergents and care products which then impair its function. Your laundry is not being dried correctly

~ Page 35

.

Drying has been interrupted as a result of a power cut, because the condensate container is full or because the maximum drying time has been exceeded.

Note: See also the laundry tips

~ Page 24 .

Drying time too long?

The fluff filter may be dirty and cause a longer drying time. Clean the fluff filter.

If the air inlet on the dryer is blocked or not freely accessible, this may increase the drying time. Make sure that the air inlet remains unobstructed.

The optimum ambient temperature for drying is between 15 °C and 30 °C.

Outside of this range, the drying time may increase.

Insufficient air circulation in the room may increase the drying time. Ventilate the room.

Not a fault. Energy saving mode is active

~ Page 12 .

Display panel goes off and Start button flashes.

Residual water in the condensate container despite the dryer being connected to the condensation drain*.

Not a fault. If the condensation drain is installed, residual water remains in the condensate container due to the dryer's self-cleaning function.

Humidity in the room increases.

Power cut.

Unusual noises when drying.

The dryer feels cold despite drying.

* Depending on the model

Not a fault. Make sure the room is sufficiently ventilated.

The drying programme is interrupted. Remove the laundry and spread it out, or restart the programme.

Not a fault. Noises are produced by the automatic cleaning of the heat exchanger

~ Page 34 .

Not a fault. The dryer can dry efficiently at low temperatures using a heat pump.

Note: If you cannot rectify the fault yourself by turning the dryer off and on, please contact our after-sales service.

38

J

After-sales service

After-sales service

If you cannot rectify the fault yourself

(faults, what to do?), please contact our after-sales service. We will always find an appropriate solution to avoid unnecessary visits by engineers.

The contact information for your nearest after-sales service can be found here or in the enclosed after-sales service directory.

Please provide after-sales service with the dryer's product number (E-no.) and production number (FD).

(1U )'

You can find this information on the inside of the dryer door or on the rear of the dryer.

Trust the expertise of the manufacturer.

Contact us. You can therefore be sure that the repair is carried out by trained service technicians who carry original spare parts.

After-sales service en

39

en Consumption values

[

Consumption values

Consumption values table

Programme

Spin speed which is used for spinning the laundry

Duration** Energy consumption**

Cottons

Cupboard Dry* 1400 rpm

1000 rpm

800 rpm

9 kg 4,5 kg

214 min 136 min

240 min 152 min

268 min 170 min

9 kg

1,27 kWh

1,42 kWh

1,59 kWh

4,5 kg

0,74 kWh

0,83 kWh

0,93 kWh

Iron Dry* 1400 rpm

1000 rpm

800 rpm

142 min 89 min

164 min 103 min

186 min 117 min

3,5 kg

0,76 kWh

0,95 kWh

0,99 kWh

3,5 kg

0,48 kWh

0,56 kWh

0,64 kWh

Easy-Care

Cupboard Dry* 800 rpm

600 rpm

60 min

73 min

0,40 kWh

0,46 kWh

For testing in accordance with applicable standard EN61121 the dryer shall be used with external drain set.

* Programme setting for testing in accordance with the applicable EN 61121 standard.

** The values may differ from those specified, depending on the type of fabric, composition of laundry to be dried, residual moisture in the fabric, the degree of dryness that has been set, the amount of laundry being loaded and the environmental conditions.

Most efficient programme for cotton fabrics

The following "standard cottons programme" (identified with ü ) is suitable for drying normal, wet cotton laundry and is most efficient in terms of its combined energy consumption for drying wet cotton laundry.

Standard programme for cottons in accordance with current EU regulation 932/2012

Programme + Drying level

ü Cottons + Cupboard Dry

Load

9 kg/4,5 kg

Energy consumption

1,42 kWh/0,83 kWh

Programme duration

240 min/152 min

Programme setting for testing and energy labelling in accordance with Directive 2010/30/EU

40

J

Technical data

Dimensions :

85 x 60 x 60 cm

Height x width x depth

Weight :

Approx. 57 kg

Maximum load :

9 kg

Condensate container :

4,6 l

Connected voltage :

220 - 240 V

Connected load :

Max. 700 W

Fuse :

10 A

Drum interior light *

Ambient temperature :

5 - 35 °C

Power consumption when switched off :

0,13 W

Power consumption when ready for use (left-on mode) :

0,13 W

* Depending on the model

Technical data en

41

6

6

Repair order and advice in the event of faults

GB 0344 892 8999 (Calls charged at local or mobile rate.)

IE 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.)

You can find the contact information for all countries in the attached after-sales service directory.

BSH Hausgeräte GmbH

Carl-Wery-Straße 34

81739 München

GERMANY siemens-home.com

0DQXIDFWXUHGE\%6++DXVJHUlWH*PE+XQGHU7UDGHPDUN/LFHQVHRI6LHPHQV$*

*9001115911*

9001115911

(9604)

advertisement