JBL Bar 5.1 Surround Owner's Manual
JBL Bar 5.1 SURROUND adds an extra dimension to your home entertainment system, boosting your TV’s sound and transforming movies, sports, and music into immersive experiences that will thrill your senses. With 5.1 channels of real surround sound, a powerful 10-inch subwoofer, and two detachable, battery-powered surround speakers, you'll hear every detail, from the roar of the crowd at a football game to the whisper of dialogue in a movie.
Advertisement
Advertisement
JBL Bar 5.1
OWNER’S MANUAL
2
TABLE OF CONTENTS
1. INTRODUCTION
3
2. WHAT’S IN THE BOX
3
3. PLACE YOUR SOUNDBAR
PLACE THE SOUNDBAR ON THE TABLE
WALL MOUNT THE SOUNDBAR
WALL MOUNTING THE SURROUND SPEAKER
(OPTIONAL)
4. CONNECT YOUR SOUNDBAR
CONNECTING THE SOUNDBAR TO YOUR TV
CONNECTING THE SOUNDBAR TO OTHER DEVICES
4
4
4
5. POWER ON YOUR SYSTEM
PAIR WITH THE SUBWOOFER
5
5
3
3
4
4
6. USE YOUR SOUNDBAR SYSTEM
USING THE WIRELESS SPEAKERS
HOW TO USE BLUETOOTH
HOW TO USE SOUNDSHIFT WITH BLUETOOTH
HOW TO USE USB AUDIO
7. SOUND
BEFORE YOU START
ADJUST THE VOLUME
CHOOSE SOUND EFFECT
2. SOUND MODE
3. NIGHT MODE
SYNCHRONIZE VIDEO AND SOUND
8. AUDIO
8
TO CONTROL THE SOUNDBAR
FOR MOST SAMSUNG, LG, SONY AND VIZIO TVS
FOR OTHER TVS, DO IR REMOTE LEARNING
10. SYSTEM
1. AUTO STANDBY
2. AUTO WAKE UP
3. SET DISPLAY BRIGHTNESS
4. APPLY FACTORY SETTINGS
5. CHECK SOFTWARE VERSION
6. SOFTWARE UPDATE
11. PRODUCT SPECIFICATIONS
10
GENERAL 10
INPUT AND OUTPUT
PRODUCT DIMENSION AND WEIGHT
WIRELESS TRANSMITTER/RECEIVER SECTION
10
10
10
10
10
9
9
9
9
9
9
9
9
9
9
6
6
5
5
7
7
8
8
8
8
8
8
8
8
12. TROUBLESHOOTING
10
SYSTEM 10
SOUND
VIDEO
BLUETOOTH
10
11
11
11
1. INTRODUCTION
Thank you for purchasing the JBL Bar 5.1. The JBL Bar 5.1 is designed to bring an extraordinary sound experience to your home entertainment system. We urge you to take a few minutes to read through this manual, which describes the product and includes step-by-step instructions to help you set up and get started.
CONTACT US: If you have any questions about JBL Bar 5.1, its installation or its operation, please contact your retailer or custom installer, or visit our website at www.JBL.com.
2. WHAT’S IN THE BOX
Soundbar
HDMI Cable (4ft, 1200mm)
AUX Cable (4ft, 1200mm)
Optical Cable (4ft, 1200mm)
Calibration Microphone
x1
Subwoofer
Wall-Mount Brackets x1 x1 x1 x1 x1 x1
Remote Control and Batteries
Product Information & Wall-mounted guide x1 x1
Wireless Surround Speakers
3. PLACE YOUR SOUNDBAR
3a. Place the soundbar on the table
x1
Power Cables* (4ft, 1200mm)
*Power cable numbers varied by regions x1 www.jbl.com
3
4
3b. Wall mount the Soundbar
Use tape to stick the wall-mounted paper guide on the wall, push a pen tip through the center of each mounting hole to mark the wall-mounted bracket location and remove the paper.
TV
HDMI cable
HDMI (ARC)
Note: #NBNMjQLSG@SSGD'#,("$"ETMBSHNMNMXNTQ35HRSTQMDCNM
Connect to TV through Optical
Screw the L-shaped wall mount brackets on the pen mark; screw the threaded mounting post into the back of the soundbar; then hook the soundbar on the wall.
1
3
2
PP
0.31"
PP "
PP
3c. Wall mounting the Surround Speaker (optional)
1. Choose a location to mount the surround speakers. In a
RS@MC@QCRTQQNTMCRNTMCBNMjFTQ@SHNMSGDADRSKNB@SHNMR@QD the sides or behind the main seating area.
2. Screw the small wall mount brackets to the wall in the desired location
3. Hook the surround speakers to the bracket
3
1
OPTICAL cable
An Optical connection supports digital audio and is an alternative to an HDMI audio connection. An optical audio connection can typically be used if all of your video devices are connected directly to the television--not through the soundbar HDMI inputs.
Note: "NMjQLSNRDSXNTQ35@TCHNRDSSHMFRSNRTOONQSfDWSDQM@K speakers” and disable the built-in TV speakers.
Connecting the soundbar to other devices
Option 1: Connect digital devices through HDMI
HDMI OUT (ARC) HDMI IN
2
4. CONNECT YOUR SOUNDBAR
This section helps you connect your soundbar to a TV and other devices, and set up the whole system.
Connecting the Soundbar to your TV
Connect your soundbar to a TV. You can listen to audio from TV programs through your soundbar.
Connecting to TV through HDMI (ARC)
An HDMI connection supports digital audio and is the best option to connect to your soundbar. If your TV supports HDMI ARC, you can hear the TV audio through your soundbar by using a single HDMI cable. This HDMI connection is required if you intend to connect other video devices to the soundbar inputs to display on your TV.
HDMI IN / HDMI (ARC) HDMI OUT
Connect a digital device such as a set-top box, DVD/Blu-ray player, or games console to your soundbar through a single HDMI connection. When you connect the devices in this way and play
@jKDNQF@LDSGD
• video is automatically displayed on your TV, and
• audio is automatically played on your soundbar.
Using a High Speed HDMI cable, connect the HDMI OUT connector on your digital device to the HDMI IN on your soundbar. Connect your soundbar to TV through HDMI
OUT (ARC).
Option 2: Connect devices through analog audio cables
AUX-IN
AUX cable
AUX-OUT
1. Some devices may not feature a digital audio connection. If your device features both digital and analog audio connections, a digital connection is preferred--do not connect both digital and analog at the same time. Using an analog cable, connect the
AUX IN (3.5mm jack) on your SoundBar to the AUX IN/ 3.5mm connectors on your portable devices.
2. Press repeatedly SOURCE button on the remote control until
AUX is displayed on the display panel.
5. POWER ON YOUR SYSTEM
The wireless subwoofer automatically connects with the soundbar when both units are powered on. If the subwoofer is on and connected, the LED lights white continuously.
If no audio from the wireless subwoofer can be heard, manually pair the subwoofer:
1. Turn on the soundbar and the subwoofer. If the connection is lost, the LED indicator on the subwoofer blinks slowly.
2. Press the CONNECT button on the subwoofer to enter pairing mode. The LED indicator on the subwoofer blinks quickly.
3. Press and hold DIM DISPLAY button on remote control for
5 seconds, followed by short press on BASS+, and BASS-
ATSSNMHMRDPTDMBD/@MDKCHROK@XVHKKRGNVf/ (1(-&t
If the pairing succeeds, the LED indicator on the subwoofer
KHFGSRTO@MCSGDRNTMCA@QCHROK@XVHKKRGNVf#.-$t
If the pairing fails, the indicator on the subwoofer blinks slowly.
4. If the pairing fails, repeat the steps above.
6. USE YOUR SOUNDBAR SYSTEM
1. How to control your soundbar
a. Top panel
1
2
4
3
Pairing with the subwoofer
1
3
13
15
4
8
9
17
19
21
Power Volume
Down
Volume
Up
Source
b. Remote Control
2
5
7
6
1) Power
2) Source*
3) Play / Pause
4) Volume -
5) Volume +
6) Previous
7) Next
8) Wireless Surround Level+
9) Wireless Surround Level-
10) Mute
10
11
12
14
16
14) Soundshift On / off
2GTEkD1DOD@S
18
20
17) Night mode On / off
19) Bluetooth
20) Audio Sync +
21) Audio Sync -
* Switch between HDMI ARC/ HDMI 1/ HDMI 2/ HDMI 3/ Optical/ AUX/ Bluetooth/
USB
** Switch between Standard/ music/voice/ movie/ sports sound mode or press and hold 5 seconds to reset default audio setting
%NQ42!OK@XA@BJNMKXRVHSBGADSVDDMRGTEkDQDOD@S@KKQDOD@SNMDNEE www.jbl.com
5
6
2. Using the Wireless Speakers
The JBL Bar 5.1 features two wireless surround speakers that transform the soundbar to a full 5.1 surround sound experience.
The soundbar system will reproduce the experience you hear in the movie theater and create an immersive music experience.
How to use your wireless surround speakers:
1. Detach the speakers from the main soundbar and freely place them to the sides or behind the main seating area.
2. Note that the narrow side of the speaker emits the sound. Point this side towards the listening location.
Speaker charging
Standby Mode
1. The wireless surround speakers feature standby mode. In this condition the speakers should automatically reconnect to the main soundbar without any other action.
2. The wireless surround speakers automatically enter standby for
a total of 10 minutes if one presses POWER OFF on the remote
control or the soundbar top-panel buttons.
3. The wireless surround speakers automatically switch to standby after 10 minutes of button inactivity and no audio/video play from a connected device.
4. The wireless surround speakers automatically power off after
20 minutes of button inactivity and no audio/video play from a connected device.
Reconnecting to the Main Soundbar
To re-connect the wireless surround speakers to the soundbar, jQRS BNMjQL SGD L@HM RNTMCA@Q HR /.6$1 .- SGDM OQDRR SGD
RECONNECT button on the wireless surround speaker.
Reconnect to soundbar /
Power Off
3. The wireless surround speaker volume level is set to a default setting. Press the WIRELESS SURROUND +/- buttons on the remote control to adjust the surround speaker volume level
1DUHDVSGDf TCHN"@KHAQ@SHNMtRDBSHNMSNB@KHAQ@SDSGDVHQDKDRR
ROD@JDQ RXRSDL SN XNTQ RODBHjB ROD@JDQ OK@BDLDMS @MC QNNL orientation.
Surround Speaker LED Lighting Indication
• WHITE (Solid) : Connected
• WHITE (Slow Blinking) : Lost connection
• WHITE (Fast Blinking) : Searching for soundbar
• RED (Solid)
• RED (Blinking)
: Charging
: Low battery
Battery and Charging
• Each wireless surround speaker features 10 hours of playtime.
3 hours of charging.
soundbar and the system is in STANDBY mode. The surround speakers will stop charging when the soundbar is power ON.
USB connector, located on the bottom of the speaker.
3. How to use Bluetooth
to start Bluetooth pairing
PAIRING
CONNECTED
Settings Bluetooth
Bluetooth
DEVICES
JBL Bar 5.1
Now Discoverable
Connected
Remark: Press and hold Bluetooth (BT) button on your remote control for 3 seconds if you want to pair another mobile device.
NOTES enter <0000>.
be lost if the distance between the Soundbar and the Bluetooth device exceeds 32.8 ft/10m.
Ready state.
that generate electromagnetic waves must be kept away from the Soundbar main unit - e.g., microwaves, wireless
LAN devices, etc.
3. How to use Soundshift with Bluetooth
By default, Soundshift is OFF, Bluetooth music cannot break in your current source.
Press SOUNDSHIFT button on your remote control to enable Soundshift feature.
While Soundshift is on, play and pause your music source to enjoy auto-switch between your mobile devices - Bluetooth source (A) and TV - Previous source (B).
(A)
(B)
4. How to use USB Audio
/K@XLTRHBjKDRKNB@SDCNM42!RSNQ@FDCDUHBDRSGQNTFGSGD soundbar.
1. Connect a 2.0 USB drive to this product. until USB is displayed on the display panel.
If USB is detected, display will show LOADING and music start playing automatically.
2NMFR VHKK @OOD@Q HM SGD NQCDQ NE SGD K@RS jKD @CCDC SN SGD
USB drive.
How to Control USB playback
4RD/K@X/@TRD/QDUHNTR-DWS2GTEkDSNBNMSQNK42!OK@XA@BJ
Mode
Off
Description
Play songs on USB device on order
Display
OFF
Play songs randomly SHUFFLE
2GTEkD
Play a same song repeatedly
ONE
Repeat once
Repeat all
Play all songs on USB ., ALL repeatedly by order of the folder logic
Before you connect a USB device, be aware of the following: q3GHR RNTMCA@Q B@M CHROK@X jKD NQ ENKCDQ M@LDR SG@S BNMS@HM numbers or English characters only. Other languages and symbol is not supported.
q(ESGDjKDM@LDNE@jKDNM@42!CDUHBDDWBDDCRBG@Q@BSDQR it is not displayed on the Soundbar’s display.
q#NMNSQDLNUDSGD42!CDUHBDVGHKDHSHRSQ@MREDQQHMFjKDR q#1,OQNSDBSDCLTRHBjKDR,/6, EQNLBNLLDQBH@KVDA sites cannot be played.
Compatible USB devices
• MP3 Player : Flash type MP3 player.
• USB Flash Drive : Devices that support USB 2.0.
• Some USB devices may not be supported.
USB device requirement
• Devices which require additional program installation connected to a computer, are not supported.
• Do not extract the USB device while in operation.
• For a large capacity USB, it may take longer than a few minutes to be searched.This unit is not supported when the total number
NEjKDRHRNQLNQD
• The Soundbar USB Port cannot be connected to PC and it cannot be used as a storage device.
q3GDDW% 3@MC-3%2jKDRXRSDLHRMNSRTOONQSDCNMSGHRTMHS
(FAT16/FAT32 systems are available.)
• Depending on some devices, it may not available to recognize the followings on this unit.
-- External HDD
-- Card readers
-- Locked devices
-- Hard type USB devices
-- USB hub
-- Using USB extension cable
-- Android device www.jbl.com
7
8
7. SOUND SETTING
This section helps you choose the ideal sound for your video or music.
Before you start
• On the soundbar, switch to corresponding source for other
devices.
Adjust the volume
level.
• To mute sound, press MUTE button.
VOLUME +/- button
Choose sound effect
1. Bass
• Press BASS +/- to change the subwoofer volume level.
2. Sound mode
q 2DKDBSOQDCDjMDCRNTMCLNCDRSNRTHSXNTQUHCDNNQLTRHB display panel.
• STANDARD mode if you want to enjoy the original sound.
• MUSIC, MOVIE, VOICE, SPORT mode depending on the content you want to listen to.
SGDL@HMA@QRNTMCLNCDRED@STQDRODBHjBADG@UHNQR
Sound Mode What you hear in the detached wireless surround speakers
Ambience and special effects Standard
Music
Movie
Voice
Sports
Ambience and special effects
Ambience and special effects
3. Night mode loud sounds when audio is played.
soundtracks.
• Press NIGHT MODE button to turn night mode on or off.
Press and hold 5 seconds SOUND button to reset default
Synchronize video and sound
to match the video.
with the video.
8. AUDIO CALIBRATION
Audio Calibration will optimize the wireless speaker sound settings for a better surround sound experience.
Remove the wireless surround speakers from the soundbar.
Connect the microphone into the connector on the right side of the soundbar.
Place the microphone at ear-level at the listening position. For best surround sound effect, position the wireless surround speakers to the sides and slightly behind the listening area.
Be sure to point the narrow side of the surround speaker towards the listening area, and remove any obstruction between the microphone and the wireless surround speakers.
Press and hold the calibration button for 3 seconds. The calibration sequence will begin with a countdown.
1
>3 s
2
DONE 3
NOTE: any ambient noise or sounds may disrupt the calibration sequence. Step out of the way and remain silent during the calibration.
After the calibration is complete, unplug the microphone and save for later.
-.3$ TCHN B@KHAQ@SHNM RDSSHMFR @QD R@UDC ENQ RODBHjB VHQDKDRR speaker locations. If the wireless speakers are moved to different locations, then the audio calibration settings should be re-measured.
9. HOW TO USE YOUR TV REMOTE
CONTROL TO CONTROL THE
SOUNDBAR
Use your own TV remote control to control your soundbar
7a. For most Samsung, LG, Sony and Vizio TVs*
The soundbar responds to your TV remote control automatically.
Controllable functions are volume up/down and mute. Press and hold SHUFFLE button on soundbar remote control if you want to disable this function.
2
TV
SOURCE
3 DONE
Follow the same procedure for VOLUME - and
VOLUME + . For mute, press both VOLUME + and VOLUME - button on soundbar and press
MUTE button on TV remote control. Press and hold VOLUME+ and SOURCE button on soundbar again and now your soundbar responds to your TV remote control.
10. SYSTEM
1. Auto standby
This soundbar automatically switches to standby after 10
TV REMOTE ON
>3 s
Note: l ,@JDRTQDSG@SSGDRNTMCNTSOTSNEXNTQ35HRRDSSNf$WSDQM@K speaker”.
– Depending on the remote control, this function may not work
well.
control.
– This function may not work well when HDMI CEC is ON. the volume button.
– If your TV remote control is not supported, follow section 7b and do IR remote learning.
7b. For other TVs, do IR remote learning
To program the soundbar to respond to your TV remote control, follow these steps. First, press and hold VOLUME+ and SOURCE button to enter learning mode.
1
>5 s
LEARNING
Then, press POWER button on the soundbar and press POWER button on the TV remote control
2. Auto wake up
The soundbar is powered on whenever a sound signal is received. This is most useful when connecting to the TV using the optical cable, as most HDMI™ ARC connections enable this feature by default.
3. Set display brightness
Press DIM button on remote control repeatedly to select a different brightness level of the display panel on this product
4. Apply factory settings
the factory. and SOURCE button on soundbar top panel until text display shows RESET.
automatically switches off and restarts.
5. Check Software version
source, Hold and press DIM DISPLAY button for 5 seconds, followed by SOUND MODE and NIGHT MODE button. subwoofer to soundbar via a 3.5mm AUX in cable and follow the above procedure.
6. Software Update
)!+L@XNEEDQTOC@SDRENQ2NTMCA@QRRXRSDLjQLV@QDHMSGD
ETSTQD(E@MTOC@SDHRNEEDQDCXNTB@MTOC@SDSGDjQLV@QDAX
BNMMDBSHMF@42!CDUHBDVHSGSGDjQLV@QDTOC@SDRSNQDCNM it to the USB port on your soundbar.
Please visit www.JBL.com or contact JBL call center to
QDBDHUDLNQDHMENQL@SHNM@ANTSCNVMKN@CHMFTOC@SDjKDR www.jbl.com
9
10
11. PRODUCT SPECIFICATIONS
General
• Total Maximun Power : 510W
• Soundbar Maximum Power : 150W
• Subwoofer Maximum Power : 300W
• Surround Speaker Maximum
Power : 30W x 2
• Surround Speaker Play Time : 10 hours
• Battery charge time : <3 hours
• Soundbar Transducer Size : 6 x 2.25” racetrack drivers
3 x 1.25” tweeter
• Subwoofer Transducer Size : 10”
• Max SPL
• Frequency Response
• Operating Temperature
: 104db
: 35Hz to 20KHz
: 0°C - 45°C
Input and Output
• Audio inputs
• HDMI Video Inputs : 3
• HDMI Video Output
(with Audio Return Channel) : 1
• HDMI HDCP Version : 2.2
%OXHWRRWKVSHFLðFDWLRQ
• Bluetooth Version q !KTDSNNSG/QNjKD
86%VSHFLðFDWLRQ
(USB) port: Type A
File Format Type Compatibility list:
: 4.2
#/5 51"/5
Extension Codec
Sampling
Rate
MPEG 1
Layer2
16KHz ~
48KHz
MPEG 1
Layer3
16KHz ~
48KHz
*.mp3
MPEG 2
Layer3
MPEG 2.5
Layer3
16KHz ~
48KHz
16KHz ~
48KHz
*.wav -
16KHz ~
48KHz
Bitrate
80kbps~320kbps
80kbps~320kbps
80kbps~320kbps
80kbps~320kbps up to 3000kbps
Product dimension and weight
• Soundbar Dimensions (W x H x D) : 1148 x 58 x 93 (mm) \
45" x 2.3" x 3.7"
• Soundbar Weight : 3.9kg \ 8.6 lbs
• Subwoofer Dimensions (W x H x D) : 440 x 305 x 305 (mm) \
16" x 12" x 12"
• Subwoofer Weight
• Surround Speaker Dimensions
(W x H x D)
• Surround Speaker Weight
: 13kg \ 28.7 lbs
: 165 x 59 x 93 (mm) \
6.5" x 2.3" x 3.7"
: 0.6kg \ 1.3 lbs
• Packaging Dimensions (W x H x D) : 1008 x 379 x 455 (mm) \
39.7" x 14.9" x 17.9"
• Packaging Weight (Gross) : 20.95kg \ 46.1 lbs
Wireless transmitter/receiver section
• Bluetooth Frequency Range : 2402MHz-2480MHz
• Bluetooth Max Transmitting : 9dbm (EIRP)
power
• Bluetooth Transmitter : GFSK, /4 DQPSK, 8DPSK
modulation
• 5.8G Wireless Frequency Range : 5725MHz- 5875MHz
• 5.8G Max Transmitting power : 9dBm (EIRP)
12. TROUBLESHOOTING
If you have problems using this product, check the following points before you request service.
System
The unit will not turn on.
• Check if power cord is plugged into the outlet and the soundbar
Sound
No sound from soundbar.
• Make sure that the soundbar is not muted.
• On the remote control, select the correct audio input source devices.
when:
– the soundbar and TV are connected through HDMI ARC connection, or
– a device is connected to the HDMI IN connector on your soundbar.
VOLUME -, VOLUME+ and SOURCE button on soundbar top panel
Sound is strange after sound setting adjustment control for 5 seconds
No sound from the wireless subwoofer.
is blinking, connection is lost. Pls manually pair the Subwoofer to soundbar (see ‘Pair with the subwoofer’ on page 4).
Distorted sound or echo.
that the TV is muted.
Audio and video are not synchronized.
Error message is displayed on the display panel.
q 6GDM f$11.1t HR CHROK@XDC HS HMCHB@SDR SG@S @M HMOTS @TCHN format is not supported.
q 6GDMf$11.1tHRCHROK@XDCHM42!RNTQBDHSHMCHB@SDRSG@SSGD
BNMMDBSDC42!CDUHBDNQ TCHNjKDHRMNSRTOONQSDC
Video
If there is no picture on the TV Screen
ON, and the input is set correctly on the soundbar.
Bluetooth
A device cannot connect with the soundbar.
the user manual of the device on how to enable the function.
device. Press and hold BT button on remote control to disconnect the connected device, then try again.
correctly.
Quality of audio play from a connected Bluetooth device is poor.
soundbar, or remove any obstacle between the device and the soundbar.
The connected Bluetooth device connects and disconnects constantly.
soundbar, or remove any obstacle between the device and the soundbar.
deactivated automatically to save power. This does not indicate any malfunction of the soundbar.
Remote Control
The remote control does not work. is too far, move it closer to the unit.
www.jbl.com
11
12
͜ͺͭͬͪΉͶͪͺʹͪ
͗ͪͱͷͪͯͷͲͯͼͬͪͺͪ
͒ͱͭͼͬͲͼͯ͵Ά
+#-
͊ʹͼͲͬͷͪΉͪʹͽͻͼͲͯͻʹͪΉͻͲͻͼͯͶͪ
ͪ͟ͺͶͪͷ͒ͷͼͯͺͷͯͷ͵͒ͷͮͪͻͼͺͲͱ͒ͷʹͺͺͯͳͼ͔ͯͮ͛͊͢ͷͷͯʹͼͲʹͽͼͭ͛ͼ·Ͷ;ͺͮ
͊ͼ͵ͪͷͼͲʹ͛ͼͺͲͼ;Ͳͻ
͛ͼͺͪͷͪͺͲͻͿͰͮͯͷͲΉ
͒Ͷͺͼͯͺ͚ͬͻͻͲΈ
͔Ͳͼͪͳ
000i͚͖͚͊͊͗͛͛͟͝Ͳ͊ͳͧͻi͚ͻͻͲΉ͖ͭͻʹͬͪͽ͵͎ͬͲͷͯͬͮʹ
͍ͪͺͪͷͼͲͳͷ΅ͳͯͺͲͮ ͭͮ
͒ͷ;ͺͶͪͲΉͻͯͺͬͲͻͷ΅ͿͯͷͼͺͪͿ XXXIBSNBODPNSVͼͯ͵
͛ͺʹͻ͵ͽͰͫ΅ ͵ͯͼ
ͬͪ͜ͺͻͯͺͼͲ;ͲͲͺͬͪͷ
͎ͪͼͪͺͲͱͬͮͻͼͬͪ ͎ͪͼͪͲͱͭͼͬ͵ͯͷͲΉͽͻͼͺͳͻͼͬͪͺͯͮͯ͵ΉͯͼͻΉͮͬͽͶͫͽʹͬͯͷͷ΅ͶͫͱͷͪͯͷͲΉͶͲͱͬͼͺͳͭͺͽ΅
ͻͲͶͬ͵ͬͻͯͺͲͳͷͭͷͶͯͺͪͲͱͮͯ͵ͲΉͻ͵ͯͮͽΈͲͿͻ͵ͯͺͪͱͮͯ͵Ͳͼͯ͵Άͷͭͱͷͪʹͪjx͔ͮͲͺͬʹͪ
ͻͼͬͯͼͻͼͬͽͯͼͺΉͮʹͽͫͽʹͬ͵ͪͼͲͷͻʹͭͪ͵;ͪͬͲͼͪͷͪͲͷͪΉͻΉͷͬͪͺΉͭͮͪ.:
ͭͮͯj.xͶͯͻΉͺͲͱͬͮͻͼͬͪ ͊ΉͷͬͪͺΆ#;ͯͬͺͪ͵Ά$ͶͪͺͼͲͼͮͲj:xͭͮͺͲͱͬͮͻͼͬͪ
"#$Ͳͼͮ
HARMAN International Industries,
Incorporated 8500 Balboa
Boulevard, Northridge, CA 91329
USA www.jbl.com
© 2017 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated, registered in the United
2S@SDR@MCNQNSGDQBNTMSQHDR%D@STQDRRODBHjB@SHNMR@MC@OOD@Q@MBD@QDRTAIDBSSN change without notice. The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International
Industries, Incorporated is under license. Other trademarks and trade names are
SGNRDNESGDHQQDRODBSHUDNVMDQR3GDSDQLR'#,(SGD'#,(KNFN@MC'HFG#DjMHSHNM
Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Dolby, Dolby Audio, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.
TR04336_A
5.1-Channel 4K Ultra HD Soundbar with True Wireless Surround Speakers
Your ultimate all-wireless movie experience.
The JBL Bar 5.1 transforms from a soundbar into a true wireless 5.1 home theater system for an epic movie and music-listening experience. The soundbar features two detachable batterypowered wireless surround speakers with 10-hours of playtime, 510W of total system power, a 10” wireless subwoofer, three HDMI ™ inputs to connect 4K devices and Bluetooth ™ . With
Dolby ® Digital, Dolby Pro Logic II and DTS, your movies, music and video games will never sound more incredible. The soundbar features JBL SoundShift ® , which allows you to instantly switch between the sound from your TV and the Bluetooth sound from your mobile phone or tablet. The soundbar is programmed to respond to your TV remote, so you can control everything with your existing TV remote control. The JBL Bar 5.1 re-defines the soundbar experience.
Features
JBL 5.1 Surround Sound with 510W of power
Detachable, battery-powered wireless
Thrilling bass from a 10 " (250mm) wireless
subwoofer
True 4K connectivity with 3 HDMI In/ HDMI
Wireless music streaming with Bluetooth
Works with your TV Remote Control
JBL SoundShift ®
5.1-Channel 4K Ultra HD Soundbar with True Wireless Surround Speakers
Features and Benefits
JBL 5.1 Surround Sound with 510W of power
Ensures a high-quality audio performance for your movies and music.
Detachable, battery-powered wireless surround speakers
Enjoy true wireless surround sound in cinematic 5.1 with 10 hours of playing time.
Thrilling bass from a 10 " (250mm) wireless subwoofer
Enjoy rich and thrilling bass with the convenience of flexible placement without the hassle of wires.
True 4K connectivity with 3 HDMI In/ HDMI Out (ARC)
Easily connect all your 4K devices and upgrade your home entertainment to Ultra HD.
Wireless music streaming with Bluetooth
Stream all of your music wirelessly from any mobile device.
Works with your TV Remote Control
This JBL soundbar is designed to work with many of today’s top TV remote controls, so you can use your existing TV remote control for both TV and soundbar.
JBL SoundShift ®
Allows you to instantly switch between sound from your TV and sound from your phone or tablet.
What’s in the box:
Soundbar
Wireless subwoofer
Wireless surround sound speakers (2)
Remote control with battery
Power cables (up to 5pcs depending on region SKUs)
HDMI cable
AUX cable
Optical cable
Calibration microphone
Wall mount bracket kit
Quick start guide
Warranty card
Safety sheet
HARMAN International Industries, Incorporated
8500 Balboa Boulevard, Northridge, CA 91329 USA www.jbl.com
Technical Specifications:
Total Maximum Power: 510W
Soundbar Transducer Size: 6 x 2.25
" racetrack drivers, 3 x 1.25
"
tweeter
Subwoofer Transducer Size: 10
"
Max SPL: 104dB
Surround Speaker Play Time: 10 hours
Battery Charge Time: < 3 hours
Frequency Response: 35Hz to 20kHz
HDMI Video Inputs: 3
HDMI Video Output (with Audio Return
Channel): 1
HDMI HDCP Version: 2.2
Audio inputs: 1 Analog, 1 Optical,
Bluetooth, USB
Bluetooth Version: 4.2
Soundbar Dimensions (W x H x D):
1148 x 58 x 93 (mm)\ 45
"
x 2.3
"
x 3.7
"
Soundbar Weight: 3.9 kg \ 8.6 lbs
Subwoofer Dimensions (W x H x D):
440 x 305 x 305 (mm) \ 16 " x 12 " x 12 "
Subwoofer Weight: 13 kg \ 28.7 lbs
Surround Speaker Dimensions
(W x H x D): 165 x 59 x 93 (mm)\
6.5
" x 2.3
" x 3.7
"
Surround Speaker Weight:
0.6 kg \ 1.3 lbs
© 2017 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries,
Incorporated, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice. The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
The terms HDMI , the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries. Les termes HDMI, le logo HDMI et High-Definition Multimedia Interface sont des marques commerciales ou des marques commerciales déposées de HDMI Licensing LLC aux États-Unis et dans d’autres pays.
Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories. Dolby, Dolby Audio et le symbole du double D sont des marques commerciales de Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS
Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Digital Surround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. Features, specifications and appearance are subject to change without notice.

Public link updated
The public link to your chat has been updated.
Advertisement