EVA9100_IG.fm Page 1 Sunday, August 9, 2009 2:43 PM

)NSTALLATION'UIDE

Digital Entertainer Express Model EVA9100

Start Here

This guide explains how to install the Digital Entertainer Express using the basic setup; wired Ethernet LAN; and video cable and audio cable included in the package, HDMI, or

SCART.

For wireless setup (using the optional USB Wi-Fi adapter), custom setup, or component video connections, a User Manual is provided on your NETGEAR Resource CD , or download the latest documentation at http://www.NETGEAR.com/support .

Install your Digital Entertainer Express in this order:

1. Connect the Digital Entertainer Express.

2. Set up the Digital Entertainer Express.

3. Install software on your computer with the NETGEAR Resource CD .

4. Configure your media library to work with the Digital Entertainer Express.

Connecting the Digital Entertainer

Express

The figure below shows the rear view of the Digital Entertainer Express Model EVA9100.

HDMI

S/PDIF coaxial

(audio)

Component video

USB port

Ethernet port with LEDs

Power

On/off switch

SCART

S-Video

Composite video

Stereo audio

To connect the Digital Entertainer Express:

S/PDIF optical

(audio)

1. Connect the Digital Entertainer Express to your TV set and audio equipment. If you use a digital audio/visual (a/v) receiver, use an S/PDIF coaxial or optical cable to connect it.

2. Connect the Digital Entertainer Express to the router with an Ethernet cable.

3. Connect the Digital Entertainer Express power cord, and plug it into an outlet. Make sure the on/off switch is set to on.

The LED on the front of the Digital Entertainer Express lights up to show that it is powered on.

4. Install the two AA batteries into the remote control that shipped with the product.

Setting Up the Digital Entertainer

Express

To set up the Digital Entertainer Express:

1. Turn on the TV.

2. Set the video source selector on your TV to match the connection from your Digital

Entertainer Express. For example, if you used HDMI, set the TV to use Digital HD or

HDMI input.

Note: If your TV has multiple inputs of a specific type (such as HDMI1 or HDMI2), make sure that you have selected the correctly numbered input.

3. Check the TV display. If it is not clear, aim the remote control at the Digital

Entertainer Express, and press TV Mode . You can cycle through the TV modes to get the best display. It can take 3 or 4 seconds for each TV mode change.

4. As part of the initial setup, you are prompted to select a language.

5. When you hear the audio welcome message, press OK .

If you do not hear the audio welcome message, check the connections to the Digital

Entertainer Express.

6. Select Basic Setup , and then set up the TV resolution.

7. Depending on where you bought your Digital Entertainer Express, you might be prompted to enter your zip code or to choose your country and nearest city.

If you want to receive weather information, enter your zip code. Press the down arrow when you are finished, and then press OK .

8. When prompted to install software, go to the computer where your media files are stored.

Installing the NETGEAR Digital

Entertainer Express for Windows

Software

After connecting the Digital Entertainer Express and completing basic setup, follow these steps to install the software:

1. Power on your computer, and log in as needed.

2. Insert the NETGEAR Resource CD into the CD drive on the computer.

The Welcome screen opens. If you do not see the Welcome screen, browse the files on your CD, and then click Setup .

3. Select Install the NETGEAR Digital Entertainer for Windows software .

The Setup Wizard starts.

4. Follow the Setup Wizard steps to accept the licence and install the software.

EVA9100_IG.fm Page 2 Sunday, August 9, 2009 2:43 PM

5. After the Setup Wizard steps are finished, click Configure to use the Configuration

Wizard.

Configuring Your Media Library

Use the Configuration Wizard to set up your media library to work with the Digital Entertainer

Express. Follow these steps:

1. Click Next to begin.

The Configuration Wizard prompts you to select media folders to be shared. This will allow the Digital Entertainer Express to access these files.

2. Browse and select the folders that you want, and then click Next .

The Configuration Wizard is ready to configure your Digital Entertainer Express and displays this screen:

3. For some firewalls, specific ports must be opened so that the Digital Entertainer Express can access media files on your computer. If prompted, select Allow or Unblock to allow the access.

4. Click Next , and follow the onscreen instructions to select your media folders.

5. When you are finished, go to your TV.

Your Digital Entertainer Express is ready to use. The main menu displays. For more information about using the Digital Entertainer Express, a User Manual is provided on your NETGEAR Resource CD , or download the latest documentation at http:// www.NETGEAR.com/support .

Safety Information

Please read and follow this important information, especially those instructions related to the risk of electric shock or injury to persons.

Warning: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside.

Warning: This device can display static images, which can cause “burn-in” of certain displays. Avoid leaving static images (such as photos or paused videos) onscreen for long periods of time.

Warning: There are no user-serviceable fuses. To avoid fire hazard, use only the specified fuses with the correct type number, voltage, and current ratings as referenced in the service instructions or on the equipment. Fuses should be replaced only by qualified service personnel.

Warning: This device should be used only indoors in well-ventilated areas. To reduce the risk of fire, electric shock, or interference, do not expose this appliance to moisture or rain, and use only the recommended accessories.

Technical Support

Thank you for selecting NETGEAR products. For more information and to access the online Digital Entertainer Express User Manual, see the Resource CD that came with your product.

After installing your device, locate the serial number on the label of your product and use it to register your product at http://www.NETGEAR.com/register . Registration is required before you can use our telephone support service. Registration via our website is strongly recommended.

Go to http://kbserver.netgear.com for product updates and Web support . For Warranty and

Regional Customer Support information, see the Resource CD .

This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste

Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, this product should be treated and recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive.

© 2009 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice.

August 9, 2009