Open Tender for Equipments - Employee`s State Insurance

Open Tender for Equipments - Employee`s State Insurance
ESIC MEDICAL COLLEGE & PGIMSR
EMPLOYEES STATE INSURANCE CORPORATION
K.K. NAGAR ASHOK PILLAR ROAD, CHENNAI-78.
E-mail: deanesipgimsr@gmail.com
Website: www.esipgimsrchennai.org
Fax: 044 – 24742825
Office: 044 – 24748959
512-U/11/18/2013/UG/Equipments
Dated: 16.12.2013
TENDER NOTICE No: 005
Sealed and super scribed tenders are invited by The Medical Superintendent, ESIC Hospital, K.K.Nagar, Chennai-78 for
the supply of Equipments & Instruments from reputed manufacturers / or their authorized dealers / distributors in the
prescribed tender forms for ‘SUPPLY, INSTALLATION, COMMISSIONING & MAINTENANCE OF THE FOLLOWING
EQUIPMENTS’
Annexure I-Application Form, Annexure II-Terms & Conditions, Annexure III-Company Profile, Annexure IV-Declaration
Form and specifications can be downloaded from the website www.esipgimsrchennai.org / www.esic.nic.in /
www.esichennai.org .
The application fee and EMD drawn in favor of The Medical Superintendent, ESIC Hospital, K.K.Nagar, Chennai78 should be enclosed in the Techno - commercial bid.
Sl.No
Item Name
Quantity
EMD
(`
`)
Cost of Application
(`
`)
DOUBLE BID SYSTEM
Group A
PHARMACOLOGY DEPARTMENT
1
2
1
2
3
Spectrophotometer (UV Visible range)
1
5550
250
Physiographs with Transducers and other relevant
accessories (may substitute kymographs)
1
3250
250
1
1
1
30000
9000
9000
250
250
250
1
1
1
16200
7500
3300
250
250
250
Group B
PATHOLOGY DEPARTMENT
Research Microscope
Rotary microtome
Autopsy Tables
Group C
MICROBIOLOGY DEPARTMENT
1
2
3
Sl.No
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
U.V.Transilluminator with photography
CO2 Incubator
Electrophoresis complete set
Item Name
Qty
SINGLE BID SYSTEM
Group D
PATHOLOGY DEPARTMENT
Microscopes Monocular
Binocular Microscope
Hemocytometer with red and white pipettes with Improved
Neubauers counting chamber
Chemical balance with weights
Hot air oven
Demonstration eye pieces
Sahlis hemoglobinometer
Electric vacuum embedding bath
Hot Plates electric
Paraffin embedding bath
Centrifuge machine
Slide cabinet for 1000 slides
Paper electrophoretic apparatus
Polarizing attachment for microscopes
Water bath 57 degree Celsius
Photoelectric colorimeter
Incubator
Distilled water still
pH meter electric
Waterbath rectangular
Electric Band Saw
Laboratory Stirrer
Balance for weighing organs
X ray viewing box
Box weight analytical
Ultraviolet lamp
1
EMD(`
`)
Cost of
Application(`
`)
60
11
32400
8250
250
250
60
6300
250
2
2
6
60
2
2
2
1
6
1
1
1
1
1
1
2
1
1
1
1
2
2
1
2100
1800
1800
1800
1500
1200
1200
900
900
900
750
600
600
600
600
450
300
300
300
300
300
300
300
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
Group E
PATHOLOGY DEPARTMENT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Qty
Micrometer Stage
Drill for boring glass (standard)
Blow piece with bellows for bending glass (standard regular)
Saws, Wire for cutting bones
Surgical instruments for grossing standard
1. Brain knife(2no’s)
2.
Enderotome(1no)
3. SS knife for cutting organs(2no’s)
Weighing machines for cadaver
Double demonstration eye piece
Sternal puncture needle adult size
Sternal puncture needle child size
Liver biopsy needle
Staining racks in stainless steel
Micrometer ocular
Automatic timer
Magnifying lens (Regular)
Group F
MICRO BIOLOGY DEPARTMENT
1
2
3
4
5
6
7
8
9
10
11
12
13
Microscope Students Type
B.O.D incubator
Serum inspissators
Autoclave
Balance, Chemical
Distilled water plant all glass
Hot air steriliser
Memmert incubator
Anaerobic apparatus
Distilled water plant
PH Determination apparatus (digital pH meter)
Micrometer eye pieces
Micrometer stage
Group G
COMMUNITY MEDICINE DEPARTMENT
1
2
3
4
5
6
Dissecting Microscope
Ice Lined Refrigerator (I.L.R.)
Microscope oil immeresion
Autoclave
Incubator, electric
Balance Analytical 200 gm
Comparator, Nessler
Centrifuge clinical , high speed with telcometer
Still for distilled water
Extraction Apparatus, fat, complete
Hydrometres, Spirit
Salters baby weighing machine
Weighing machine adult
Filter, Pasteur chamberland, complete set
Filter, berke fed
Harpenders Callipers (for skinfold thickness)
Sterilizers, electric (Medium size)
Height measuring stand
Barometer, Fortin’s
Balance for weighing food stuff Capacity 2 Kg
Hydrometres, milk
Hydrometers: (1) wet BULB
(2) dry BULB
Group I
PHARMACOLOGY DEPARTMENT
1
2
3
4
5
6
7
8
9
10
Digital Kymograph
Animal trolley with 12 cages
Starling’s long extension kymographs with time markers.
The ideal Respiration Pump (500 cc. CAP.)
Flame photometer
Electrical kymograph with Electrodes, Ordinary and non
polarisable, Insulated wires, time markers, electric signals,
Mercury manometer, perfusion apparatus, myograph
lever, small pulley’s upright stands and chemicals etc.,
Metabolic Cages (Dieuretic Study)
Metal mincing machine
Stimulator Electronic Arthus Thomas
Chemical Balance - Sensitive
Autoclave electric
2
Cost of
Application(`
`)
2
2
2
1
1 set
1
2
2
2
2
6
1
2
6
Nil
250/-
Qty
EMD(`
`)
Cost of
Application(`
`)
55
1
2
1
2
1
1
1
1
1
1
2
2
33000
2250
1800
1500
1200
1200
900
750
700
300
Nil
Nil
Nil
250
250
250
250
250
250
250
250
250
250
250
250
250
Qty
EMD(`
`)
Cost of
Application(`
`)
30
1
2
1
1
3
Group H
COMMUNITY MEDICINE DEPARTMENT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
EMD(`
`)
9000
1900
1200
650
550
350
250
250
250
250
250
250
Qty
EMD(`
`)
Cost of
Application(`
`)
1
1
1
1
3
2
4
1
1
1
1
1
1
1
3
1
1
Nil
250/-
Qty
EMD(`
`)
Cost of
Application(`
`)
10
4
5250
3600
1
2800
1
1650
5 sets
1500
4
1
1
1
1
1500
1200
1000
1000
1000
250
250
250
250
250
250
250
250
250
250
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
Copper Trays
Oxygen Cylinders with Trolleys 20 cu.ft
Carbon-di-oxide cylinder
Deionizer
Assembly for mammalian classes
Microscopes ordinary
Brodi’s operation tables
Assembly for perfusion apparatus for mammalian heart
Electrocardiograph
All glass distillation apparatus cap.2 litres
Bell jars Assorted
Holder for platinum wireloop
Dissection instrument
Cook’s Pole Climbing Apparatus
Vacuum & Pressure Pump Cenco
Automatic electric recording drums
Electro-Convulsiometer
Incubators
Incubator Electric
Museum drugs specimen jars
Rotarod Assembly
Four Unit isolated organ bath palmer F.67
Frog Boards Palmer c. 120
Balance Semi micro
Specimen jars Acrylic 250x165x140 mm.
B.P. Apparatus
Specimen jars Acrylic 220x150x100 mm.
Postmortem instruments sets complete
Actophotometer
Hot air oven size 14”x14”x14”
Suction pumps
Specimen jars Acrylic 220x195x80 mm.
Antihistamine Chamber with manometer
Manometers mercury Palmer C-200
Cautery machine, electric Blendsone
Animal Balance Triple Beam.
Filtering apparatus sietz filter and Millipore filter
Group J
PHARMACOLOGY DEPARTMENT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
20
2
2
1
1
4
1
1
1
1
4
100
6
1
2
1
1
1
1
30
1
1
20
1
16
8
20
2
1
1
1
16
1
6
1
2
1 each
Qty
Colorimeters
Analgesiometer
Plain stand
Chemical Balance-ordinary
Water bath, metal
Dispensing Balance with metric system weights
Digital pH meter
Long Extension for paper palmer A-130
Temperature controlled water bath 37°C
Vortex mixer
Machine for big animals like dogs (>5 Kgs)
Apparatus for isolated rabbit intestine etc.
Instruments Sterilliser Electric size 12” x 8”x6”
CENTRIFUGE(2000-3000 rpm)
Microscope students type with mechanical stage and oil
immersion.
Hook grip rods
Plethysmograph assorted
Magnetic stirrer B.T.L.
Machine for small animals like rats and gunea pig ( upto
5kg’s)
Jacquets graphic chronometer
Tablet Disintegration Machine Glass tubing (length of 6
ft.)
Pestle and Mortar
Water bath 4 hole electrically heated
Stethescope
Varnishing Tray with foot lever
Distillation apparatus
Distilled water still Manesty Electrical Cap. 2 gallo per
hour
Skin and Rectal Thermometer
Waring Blender M.S.E.
Centrifuge Electric international R.P.M. 3000
Electric Hot Plate
Hair Aesthesiometer-Palmer W.290
Jackson’s Enterograph
Smoking Burners Palmer A-291 and A-265
Tetanus Set Palmer H2O
Standard X Block
3
900
900
900
800
750
700
650
650
650
650
600
600
550
550
550
500
500
500
500
450
450
450
450
450
450
450
400
400
400
400
400
400
350
350
300
300
300
EMD(`
`)
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
Cost of
Application(`
`)
1
1
20
2
2
10
1
2
1
2
1
2
1
2
1
20
1
1
1
1
1
15
1
8
1
1
1
1
1
1
2
2
1
1
1
10
S.no: 1 to 54
Nil
Application
Fee : 250/-
37
38
39
40
41
42
43
44
45
46
47
48
Mechanical Stromhur
Metronome Palmer B-5
Cork borer set of 12
Tambours mareys Palmer C.5 & C.11
Piston Recorder Palmer C.51
Condons Drop Recorder – Palmer B-75
Crucibles with tongs
Pneumograph Palmer E
Oncometer Kidney
Oncometer Heart
Iron Spatula
Glass mortar and pestles capacity of 500 and 200 cc
Cannulas Differrterial Cannulae
a)Arterial Cannulae
b)Venous Cannulae
c)Syms Cannulae
Suppository moulds
Razor Hone
Prof.Inchleys Drop Recorder-Palmer B.78
Multimeter
Tracheal Canula Metal Palmer E.76
49
50
51
52
53
54
1
1
1 set
2
1
1
10
1
1
1
50
1 Each
S.no: 1 to 54
Nil
Application
Fee : 250/-
16
16
16
10
2
1
1
1
Pre - bid Conference for Group - A Equipments: 27.12.2013 – 11.00 A.M in DMS Chamber
Pre - bid Conference for Group - B Equipments: 30.12.2013 – 11.00 A.M in DMS Chamber
Pre - bid Conference for Group - C Equipments: 31.12.2013 – 11.00 A.M in DMS Chamber
GROUP
LAST DATE FOR
RECEIPT OF TENDER
TIME OF CLOSING
TENDER
DATE OF OPENING
TENDER
TIME OF OPENING
TENDER
A,B,C
06.01.2014
10.30 A.M.
06.01.2014
11.00 A.M.
D&E
07.01.2014
10.30 A.M.
07.01.2014
11.00 A.M.
F,G & H
08.01.2014
10.30 A.M.
08.01.2014
11.00 A.M.
I
09.01.2014
10.30 A.M.
09.01.2014
11.00 A.M.
J
10.01.2014
10.30 A.M.
10.01.2014
11.00 A.M.
If the date of opening of tender happens to be a holiday, the tender will be opened on the next working day.
Tender documents duly completed in all respects should be dropped in the Tender Box kept in the First floor of the
hospital on or before the date and time mentioned above.
Medical Superintendent
4
SPECIFICATIONS FOR GROUP – A
EQUIPMENTS
1. SPECTROPHOTOMETER (UV VISIBLE RANGE)
•
•
•
•
It is a single beam, accurate, reliable and versatile instrument for spectrophotometric analysis of any
concentration.
Range 340 to 960nm with facility of automatic concentration, transmission and
absorbance measurements.
Data display & LED display for wavelength in nm.
And equipped with extra sets of test tubes.
2. PHYSIOGRAPHS WITH TRANSDUCERS AND OTHER RELEVANT
ACCESSORIES (MAY SUBSTITUTE KYMOGRAPHS)
• Digital Physiograph two channel for recording strain gage parameter in one channel and EKG in the
other channel with Force transducer and standard accessories.
• Complete set without computer.
SPECIFICATIONS FOR GROUP – B
EQUIPMENTS
1. RESEARCH MICROSCOPE
Research Microscope for Transmitted Light Bright field studies and Reflected light
Fluorescence attachment
Stand
Rugged and sturdy stand with the following features
Optics
Power supply external for Transmitted light and Reflected Light Long life
LED Illumination system
Co-axial coarse and fine harmonic drive focusing knobs, low positioned for
convenient operation.
Built-in filter 6 position filter wheel and grey filter set containing 3 grey
filters 0.015, 0.06 and 0.25.
4 position reflector turret for fluorescence filter sets and upgradable for LED
fluorescence.
Built-in variable field diaphragm for transmitted light illumination.
Suitable for transmitted light studies viz., bright field, dark field, simple
polarization and Reflected light Fluorescence and should be upgradable for
TL Phase contrast studies.
With Anti-fungus treatment
Infinity Colour Corrected System optics
Binocular Photo
tube
Binocular photo tube with an Upright image and 20° inclination and suitable
for 23mm Field of view and above eyepieces and 100:0/0:100 ratio for
observation and documentation. Inter pupillary distance adjustment from 5575mm. It should have ‘Siodentopf’ design by which we can have two
different viewing heights.
Eyepieces
10x with field of view of not less than 23. Both the eyepieces should have
diopter adjustment of =/-5. It should capable of accepting reticules.
Eyepieces with eyecups
Nose peice
6x revolving nosepiece (capable of accommodating upto 6 objectives)
mounted on ball bearing with highly precise click stops and should have slots
for up gradation for DIC.
5
Mechanical Stage
Dual layered with hard coat anodized surface with a stage plate of
220x170mm and mechanical stage of 75x50 with right and drive. Specimen
holder for one hand operation, spring lever left
Illumination
Powerful Long Life LED illumination with minimum 10,000 hours of life
time should be quoted
Condenser
The illumination control knob and ON/OFF switch should be low positioned
for convenient operation.
Condenser 0.9/1.25H
Objectives
Planachromatic A-Plan Objectives of 2.5x,5x/0.12,10x/0.25,
40x/0.65,100x/1.25 oil.
Fluorescence
attachment
Fluorescence light attachment with Powerful LED illumination for
fluorescence excitation should be offered
Live Streaming of
slide images
Provision for
multiple person
viewing
Simple polarizer
Phase contrast
imaging
Darkfield imaging
Suitable LED illumination should automatically come in the light path, the
moment a specification Fluorescence filter set is swung in
Provision for slide imaging and real time viewing for demonstration purposes
Provision suitable for ive persons viewing at the same time
Provision should be available
Provision should be available
Provision for darkfield condenser should be available
2. ROTARY MICROTOME
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Heavy duty base to provide absolute support for mechanism and knife holder.
Aluminium covering to protect the parts.
Total feed excursion – 28mm.
Feed adjustment - 1 to 50 microns in steps of 1 micron.
Opening of object clamp – ball and flange type – 37mmx27mm.
Total feed excursion – 28mm.
Overall size – appx. 16x10x9 inches.
Surface grinding on base, horizontal, vertical and inclined slide for smooth and accurate
motion.
Ratchet wheel, CAM, and CAM weight are made of gun metal.
Axel and Catcher made from special steel.
120mm razor fabricated from highest quality fine grain tool steel.
Object hold, knife holder, tightening key.
Dust cover and oil for lubrication.
Safety razor attachment.
Honing stone ten inch size.
Leather strap with clamping device.
Razor 120 mm /140mm/160mm with back handle in case.
Full instrument with accessories to be packed in card board box.
3. AUTOPSY TABLE
•
•
•
•
•
•
•
•
•
Made of good, heavy gauge stainless steel
Body supports 2 in number made of stainless steel 6 inches wide removable type.
Six position head rest
Crusher for disposal
Provision for hot and cold water with swings spout.
Lever handles for waste / drain
Deep and large SS sink with overflow
Provision for hot and cold water
Self cleaning / washing sprinkler on sides
6
•
•
Dimension 2600 mm (W) x 850mm (D) x850mm (H)
Carrying capacity around 200kg
SPECIFICATIONS FOR GROUP – C
EQUIPMENTS
1. U.V.TRANSILLUMINATOR WITH PHOTOGRAPHY
• 12 BIT SCIENTIFIC GRADE CCD CAMERA (2/3" format), with Anti-reflective coating and
Micro Lens which should give true 12-bit optical images, not through extension of the dynamic
range.
• Should have MEGAPIXEL RESOLUTION (atleast 1.4 megapixels)
• Should have auto image capture for single button click to automatically control camara zoom,
focus and iris as well as exposure time
• Wide dynamic range of 0-4.0 OD, Greater than 70 db signal to noise
• Full screen refresh rate of atleast 30 frames per second for real time
• Viewing 8-48 mm motorized zoom lens
• Image acquisition in 4 unique resolution/sensitivity modes for maximized flexibility
• Darkroom should be chemiluminescence imaging ready
• Darkroom with touch panel for turning on/off all light sources & changing filters
• Auto shut-off of lights after taking image
• All lights & filters should be controlled through software too
• Should have 5-Position Motorized Filter Wheel for multiplex imaging
• Dual wavelength with dual intensity
• UV Transilluminator (302 and 365 nm) with EVENSCAN for even excitation & faster image
acquisition & imaging area of atleast 21 x 26 cm.
• Independent source for Transilluminated While Light (Fold-Down Fiber-optic WHITE LIGHT
TABLE) with imaging area of atleast 21 x 31 cm
• Dual Epi-White Lights
• Dual Epi-UV Lights (Dual wave length 254 & 365 nm)
• Software for acquisition, enhancement, editing, annotation, archiving & analysis for proteins &
nucleic acids gel electrophoresis.
• Equipment should be supplied with a Laptop compatible with the above software ( Intel Pentium
i3 , OS - Windows 7, 80GB HDD, 1GB RAM, DVD Read/Write, 14" Screen)
2. CO2 INCUBATOR - With sterilization cycle
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Microprocessor controlled Co2 incubator with Ultraviolet contamination control
Temp. range : 5º C above ambient up to 50ºC
Fan free inner chamber to avoid cross contamination.
Inner chamber capacity of - approx 100-150 litre
Air - jacketed system with thick insulation for better temperature retention in case of power
failure.
Single piece seamless and weld less stainless steel interior for smooth cleaning & disinfection.
Exterior – 18 gauge, steel, powder coated.
Outer door safety sensor
Shelves – perforated stainless steel, @ four in no.
Temperature recovery ≤ 3 minutes in case of door opening for 30 sec at 37ºC.
Spatial Temp. accuracy ≤ 0.3ºC & Temp. fluctuation ≤ 0.1ºC
Drift free infrared sensor for measurement of CO2.
Constant humidity ≥ 95% RH.
Condensation free interior to prevent growth of contaminants during culture
Display of set & achieved parameters like Temp. , % of CO2 & humidity.
Electronic audio-diagnosis system with potential-free alarm audio & visual.
7
•
•
•
•
Power supply 230V ± 15%, 52Hz ± 3%
It should be UL/CE/FDA approved
Training to laboratory personal
Operating and detailed service manual should be supplied.
3. ELECTROPHORESIS COMPLETE SET
•
•
•
•
•
•
Horizontal gel electrophoresis apparatus
UV transparent Gel tray provided with stable silicon gaskets
7x10 cm gel, two comb slots, includes 8-and 15-well combs and gel.
Safety cover with attached sheathed power chords
Color coded power supply leads .
Power supply –
o power supply – 200-230V/50Hz
o Output – 0-250 V
Gel specification
o Gel sizes, cm (W× L):7 × 10
o Sample Throughput: 8-30
o Base Buffer Volume, L: ~0.27
o Cell size, cm (W × L × H) : 9.2 × 25.5 × 5.6
o Distance to Electrode, cm : 14.5
o Bromophenol blue dye migration rates: ~4.5cm/hr (at 75V)
LED digital display
Auto shut-off safety feature
Voltage-stabilizer
•
•
•
•
SPECIFICATIONS FOR GROUP – D
EQUIPMENTS
MONOCULAR STUDENT MICROSCOPE
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Body-Sturdy anti rust body with critical movements based on ball –bearing & wire guides so
that smooth precise manipulation is ensured.
Mechanical stage Coaxial low drive mechanical stage
Focusing system Coaxial coarse & fine focusing control with focus adjustment s & fine
adjustment knobs
Condenser holder Rack and pinion mounted condenser holder
Built in illumination base with precentered 6V20 W halogen light source along with a
efficient collector lens system. A led light source is preferable.
POWER SUPPLY Vac 50 Hz single phase
Nose piece Quadruple nose piece based on precision ball bearing mechanism enables smooth
objective change
Condenser Abbe condenser with aperture iris diaphragm. NA1.25 provided with a filter
holder and blue holder.
Objectives Achromatic objectives
Antifungal treated
Made from exceptionally high quality optical glass
Precision engineered for parfocal and centered viewing
Achromatic objectives 4x, 10x, 40x, spring loaded 100x oil spring loaded
Monocular inclined observation head 45degree inclined
Rotatable thro 360 degree
Anti reflection optical coatings of prisms to enhance the brightness o f the image
Wide field eye piece
WF 10 x compatible with an optionally available eyepiece micrometer.
BINOCULAR MICROSCOPE
•
•
•
•
45° inclined with 360 degree rotatable binocular tube
Co – axial built in Mechanical stage with fine vernier graduation
Designed with convenient coaxial adjustment for Jerk free smooth slide manipulation through
50x75mm
Dust proof quadruple / quintuple ball bearing revolving nose piece with positive click stops
8
•
•
•
Co-axial coarse & fine focusing adjustment knobs. Fine motion, graduated to 0.002mm
Sub stage Abbe type N.A. 1.25 condenser with rack and pinion, continuously variable iris
diaphgram with built in swing out filter holder.
With built-in illumination 6V – 20W halogen lamp
• Mechanical Tube length 160mm , with battery backup.
HEMOCYTOMETER WITH RED AND WHITE PIPETTES WITH IMPROVED
NEUBAUERS COUNTING CHAMBER
•
•
•
Inside cell of chamber: an area of 9sq.mm (3X3 Sq.mm) divided in to 9 squares of 01mm side
by means of triple lines. The central small square is further divided by triple lines into 5X5 =
25 smaller squares each with side 1/5 of a mm.
Each of the square is further divided in to 4X4=16 smallest squares with side equal to one
twentieth of a mm.
Thus dimension of individual cell of 0.05X0.05X0.0025mm
CHEMICAL BALANCE WITH WEIGHTS
• Capacity : 0 – 1 kg
• Sensitivity of 1mg.
HOT AIR OVEN
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Lab model with three side heating elements
Construction with double walled construction.
Inner chamber made of Aluminium or stainless steel sheet.
Outer chamber is made of mild steel sheet, finished with powder coated paint.
The gap between the walls is filled up with special grade glass wool for proper insulation to
avoid heat losses.
Inner chamber has ribs for placing the shelves at convenient levels.
Supplied with 2 or 3 removable shelves.
It is fitted with heavy hinges with a ball catcher, spring loaded door closing device.
Door is duly insulated.
Elements: heating elements are made of high quality nickel/chrome plated nichrome wire
which are put inside beads and placed at the bottom and in both the side ribs for uniform
temperature all over the work space.
Temperature Control: temperature is controlled by imported capillary type thermostat from
50°C to 250°C +/- 1°C.
Temperature control knob is graduated in centigrade degrees.
Ovens are supplied without thermometer.
Ventilation: air ventilators are placed near the top of the both sides to remove hot gasses and
fumes if any.
Control Panel: comprising of switch to ON/OFF the power, switch to select high or low rates
of heating, thermostat control knob and indicators for mains and thermostats. Supplied with
cord and plug.
Suitable to operate on 220 volts, 1ph, 50Hz, AC Supply.
Optional Accessories: Air circulating pan, digital display temp indicator, digital display temp
controller cum indicator in lieu of thermostat., microprocessor based PID temp. controller
cum indicator in lieu of thermostat., L shaped thermometer (Mercury) or straight type.
Timer :Size of inner chamber WXHXD = 455X455X455mm,
No. shelves=2.
DEMONSTRATION EYE PIECES
• Eye piece with a pointer
SAHLIS HEMOGLOBINOMETER
• 1 set Consists of comparator, hemoglobin tube, hemoglobin pipette, stirrer, Pasteur pipette
etc.,
9
ELECTRIC VACUUM EMBEDDING BATH
•
•
•
•
•
•
•
•
•
•
Stainless steel body
Minimum two pots
Pot depth – 160 mm, pot diameter 150 mm
External diameter – LxWxD – 670x380x270 mm
Gauge – vacuum
Temperature control – digital PID controller
Minimum temperature – Ambient + 5 oC
Maximum temperature – 100 oC
Temperature setting accuracy 0.1 oC
Power- 2000 W
HOT PLATES ELECTRIC
•
•
•
•
•
Rectangular or round Hot plate
Cast Iron top 200mm, with Energy regulator
Sizes: 250X400X150mm, digitally controlled (optional)
S.S. Top
Works on 220V AC
PARAFFIN EMBEDDING BATH
•
•
•
•
•
Inner Wall with S.S. sheets
Slide drying chamber at bottom
Copper cups and tubes with lids and handle
Temperature range: ambient +/- 5 to 65°C
Works on 220V AC.
CENTRIFUGE MACHINE
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Laboratory equipment centrifuge machine high speed
Heavy duty Sturdy MS Body,
Well painted finish,
Maximum speed of 6000RPM at 10/12 tube of 15ml total square body,
Lid lock manual type,
Speed control by analogue know,
Digital display of timer,
Timer time 0-60 minutes speed display is digital,
Speed setting with help of knob,
Auto off if lid is open,
Lid breaking system provided,
Power consumption 500Watt,
Power requirement 220V and 50 to 60Hz,
Weight approx. 15Kgs,
Total noiseless operation,
Non vibration,
Complete with head and power lead.
SLIDE CABINET FOR 1000 SLIDES
•
•
Stainless steel, 1000 capacity Wrap proof, break proof for storage of prepared microscopic
slides.
Have slots to accommodate 1000 slides with lid. Wooden with hinged lid, slides are held in
numbered slots and there is an index inside the lid.
PAPER ELECTROPHORETIC APPARATUS
•
•
•
To be used in horizontal and vertical electrophoresis
Agarose gel based electrophoresis
Should be compatible with clinical electrophoresis gel analysis software
10
•
•
•
•
•
•
•
•
•
•
•
•
•
Should have an optional I E F chamber for isoelectric for using
Standard chamber should have a heat shield for use in high resolution application
Should have option for future upgradation
More efficient data storage/quality coated
Widest menu with proteins, lipoprotein, hemoglobin, immunofixation & isoenzymes
Precise antisera application for IFE with reproducible lane coverage
Continuous loading of different assays
Sample application technology to ensure full protein application
Should have safety features
Integral electrodes to be supplied
Warranty for 2 years
Service engineers to be based in Chennai
Integrated cooling by Aluminium Block
POLARIZING ATTACHMENT FOR MICROSCOPES
•
Standard type
WATER BATH 57 DEGREE CELSIUS
•
•
•
•
Double walled, inner stainless steel and outer mild steel sheet and glass window fixed on the
front for visibility of sample.
Heating mechanism should comprise of set of heat us corresponding to faster and lower
heating
Should have stirrer and speed regulator, should operate on 220/230 volts AC/DC.
Digital temperature controller cum indicator from 5 oC to 80 oC with an accuracy of +/- 1 oC.
PHOTOELECTRIC COLORIMETER
•
•
•
•
•
•
•
•
•
•
Wavelength Range: 400-700nm with 8 optional filters
Filter’s peak: 420nm, 440nm.
Wavelength(Typical): 490nm, 520nm, 540nm, 570nm, 600nm, 700nm
Measuring Modes: % T, ABS, CONC and K Factor
Photometric resolution: 0.1%T, 0.01 ABS up to 1.99 ABS (O.D.)
Display: 3 – Digit LCD
Concentration Setting Limit: absorbance read out (with decimal point removed)
Sample value (Min.): 1ml in 4ml cuvet/test tubes
Director: hermetically sealed photodiode
Power: 230V+/-10%, 50Hz.
INCUBATOR
•
•
•
•
•
•
Double walled chamber
Two doors inner plexi doors
Three side heating elements on three side of equipment.
Digital temperature controller cum indicator with forced air circulation fan
Inner size: 24”x24” X36” (approximate)
No. of shelves: 03
DISTILLED WATER STILL
•
•
•
•
•
•
Automatic sensors made available to keep the system in standby mode, when system is not in
operation
Output Ltrs/Hr: 10 lt /hr double distilled
Quality of distillate: grade 1
Conductivity us/cm: < 0.2 us/cm, On line conductivity provided to monitor quality of output
water.
Cooling water input for condemnation: 2ltrs/min X 2 inputs ,Water recycling available, no
wastage of water
Power: 230v, 50/60Hz, 2 phase, 12KW approximately
PH METER ELECTRIC
•
•
•
Digital Electronic (Table/ hand held model)
Comprehensive range of PH meters which includes digital PH meter,
Hand held PH meter,
11
•
•
•
•
•
•
•
•
•
PH testing meter etc. PH meters are made up using best quality parts and equipments. PH
Range: 0-14PH.
Mill Volt range: 0 to 1999mv.
Resolution: 0.01ph, 1mv.
Repeatability: +/- 0.01PH +/- 1mV.
Accuracy: 0.01 PH+/- 1 digit, 1mV +/- 1 digit.
Temperature compensation: 0 to 100deg C.
Operating temperature: 10 Deg C to 50 Deg C.
Display: 3.5 digit LED display.
Supplied accessories: Electrode, Stand, dust cover and instruction manual.
WATERBATH RECTANGULAR
•
•
•
•
•
•
•
Thermostatic Control/; Boiling water baths with lids having 8 – 12 holes
Temperature range from ambient to 95°C.
Thermostatic control with an accuracy of +/- 1C.
Double walled with inner wall of stainless steel and outer of MS powder coated, with Lids of
SS.
The unit is provided with immersion type heaters top work on 220VAC.
The unit is supplied with indicating lamps, main chord and Plug.
Size of the inner chamber-approx. 355x405x100mm;15kw
ELECTRIC BAND SAW
•
•
•
•
•
•
•
•
•
•
•
For cutting bones, Manual Band Sawing Machine
Technical Specifications:
Max. Job Height in mm 200
Max. Throat in mm 200
Table Size (L x W in mm) 600 x 600
Blade Speed in mtr /min. 20 - 100
Blade Size (L x W x T in mm) 3505 x 27 x 0.9
Saw Motor Capacity in HP 3
Coolant Motor Capacity in HP 0.16
Overall Size (L x W x H in mm) 900 x 700 x 2100
Approx weight in Kg 400
LABORATORY STIRRER
•
Standard Type
BALANCE FOR WEIGHING ORGANS
•
•
•
•
•
•
•
•
•
Sealed stainless steel surface, should be robust and easy to clean.
Platform size approximately 235x5x170 mm.
Display should be protected against soiling by fluids.
Sealed battery compartment.
One gram graduation.
Automatic switch off, HOLD function, pre-TARE function.
With a capacity of upto 10 kgs.
To weigh in Kg only.
Batteries to be included.
ULTRAVIOLET LAMP
• Features: high turbulence; non wetting surface; high reliability low maintenance.
X RAY VIEWING BOX
•
•
•
Regular size, 4 panel side by side X – Ray View box illuminator
Standard features: 2 lamps (F15IT8/D) per panel,
Roller gravity film holding systems,
12
•
•
•
•
•
•
•
•
•
•
•
•
Durable steel construction,
Thin 3” profile,
Chip Resistant hospital white finish,
Continuous bottom film ledge,
Even vue reflective system,
UL and cUL listed,
Centralized cluster on/off switching;
FAS – film activated switching,
MS – Master Switch,
Hospital Grade Plug Specs: surface wall mount 4 panel side by side 56”X17” viewing area
overall Dimensions: 56” L 21” H3 3/8 D.
Illumination: 2000cd/m2.
Approximate weight 84lbs
SPECIFICATIONS FOR GROUP – E
EQUIPMENTS
MICROMETER STAGE
•
Standard Type
WEIGHING MACHINES FOR CADAVER
•
Bathroom type Digital weighing scale upto 130kg
STAINING RACKS IN STAINLESS STEEL
•
To hold the slides in vertical position before and after staining to hold 10 to 20 slides.
AUTOMATIC TIMER
•
Standard Type
SPECIFICATIONS FOR GROUP – F
EQUIPMENTS
MICROSCOPE STUDENTS TYPE
•
•
•
•
•
•
•
•
•
•
•
•
•
45 degree inclined monocular head, rotatable through 360 degree fitted with fungus resistant,
anti-reflection coated prism and Locked-in Eyepiece.
Magnification: - 40X ~ 1000X.
Plain Stage: with Clips and Stain Resistant Finish.
Stage size 125m X 145mm with traverse area 50 X 70 mm. True co-axial low drive
mechanical stage.
Quadruple revolving nosepiece
Focusing by co-axial coarse and fine focusing controls, with a focus adjustment range of 25
mm
Compensating wide field single eyepiece WF10x (F.N.18).
Objective lenses: Anti-fungus achromatic objectives 4x, 10x, 40x (spring) and 100x (spring, oil
immersion).
Fully Coated Optical System
Abbe condenser 1.25 N.A. focusable with rack & pinion through 20 mm and a continuously
variable iris diaphragm with removable blue filter.
Built-In Illumination System with halogen light (6V20 W) illuminator. Detachable power cord
with 3pin plug.
Durable acid resistant epoxy coated finish.
Supplied with Nylon/ Vinyl Cover.
13
B.O.D INCUBATOR
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Double walled incubator with Capacity: 3.5 cu.ft (650 x 400 x 400mm -H X W X D)
Temperature Range: 5 OC to 60OC ( accuracy of +0.5 0C)
Microprocessor based Temperature Controller with Sensor: + 0.20C.
Refrigeration system with hermetically sealed compressor.
Fin & Tube type air-cooled condenser.
Castor wheels for easy movement
Polished 304 Grade Stainless Steel inner Chamber.
Outer made of Mild Steel with powder coated.
Magnetic gasket, handle, lock for door.
Facility for viewing inner chamber through sub doors
Sub doors made of acrylic
Adjustable ventilation rate from 10 to 100%
Stainless Steel meshed trays.
Fully automatic operation.
Illumination by low wattage lamp.
Should be supplied with Voltage Stabilizer
SERUM INSPISSATORS
•
•
•
•
•
•
•
•
•
•
•
•
Inspissator Tank –made of rust-proof stainless steel sheet. Tank capacity – 50 -70 liters.
Tray also made of stainless steel.
Tray size: 31” x 24” (80x60cm). Outer body: 41” x 26” x 16” (104x65x40cm), having a set of
slopes to provide an angle of 8-10 degree to the media containers
A constant water level setup ensuring compensation of evaporation losses.
The total heat up time – 2- 2.5 hours.
Digital controller, with an LED/LCD display to indicate set and actual temperature.
Resolution - 0.1C, uniformity - 0.5-1C and standard working temperature - 85C
Operating temperature range for the inspissator controller - 0C to 100C.
Provision of spare heaters, optional
It should be CE/FDA approved
Training to laboratory personal
Operating and detailed service manual should be supplied.
AUTOCLAVE
•
•
•
•
•
•
o
o
o
o
o
•
•
•
•
•
•
•
•
•
•
•
Double walled vertical autoclave with wing out nut locking system.
Vertical type
Inner Chamber Size : 550-650 x 350-450 x 350-450mm
Electrical Power : Power input to be 220-240VAC, 50Hz,/440 V 3 Phase as appropriate fitted with
Indian plug
Working pressure and Temperature : 5-30 Psi up to 135 degree C
Material of construction -Inner chamber , Jacket, Door : SS
Outer Chamber : SS (insulated properly)
Steam generator : Non corrosive SS /Chromium plated Brass
Heater Plate : Brass/Stainless steel
Pipe Line : Complete with SS
Stand : Stainless Steel/High quality non corrosive steel
Instrumentation Temperature , Pressure and vacuum gauges
Stainless steel Steam jacket insulated with high grade glasswool
Water level indicator with automatic low water level cut off device
Joint less gasket
Pressure switch and safety valve, self-locking of door when chamber is under pressure : vacuum breaker for jacket .
Supplied with one pressure gauge, two safety valves, one pressure release valve, one SS basket, one wing out opener
and suitable heating element.
User manual in English
Service manual in English
Certificate of calibration and inspection from factory.
Log book with instructions for daily, weekly, monthly and quarterly maintenance checklist.
Should be supplied with SS perforated drum one in number.
14
•
Requirements at installation:
Necessary Pipeline works for water inlet and steam outlet should be done by the provider. Cable for connecting to
wall socket should also be provided.
BALANCE, CHEMICAL
•
•
•
•
•
•
•
•
•
Weighing capacity – upto 200gms
Accuracy – 10 µgms
Pan size 80-120 mm
Linearity - ± 0.002 gm
Repeatability - ± 0.002 gm
Level indicator to be provided
Glass shield, dust cover to be provided
Durable and strong control keys
Easy to clean design
DISTILLED WATER PLANT ALL GLASS
• All glass – double distillation unit, Horizontal type
• Capacity – 1.5 litre
• With Borosilicate boiler, borosilicate condenser & quartz heater.
• Automatic low level water cut off device.
HOT AIR STERILISER
•
•
•
•
•
•
•
•
•
•
•
•
Inner Chamber -Stainless Steel Size 450mm(w) x 450mm (H) x 450mm (D) approx
The Dimensions can vary within 2.5 cms on any side
Out Chamber –Mild Steel with white enamel
No. of Shelves -3 (Adjustable) stainless steel
Timer -5-120 minutes
Temperature range and accuracy - 50ºC to 250ºC ± 1ºC
Temperature control knob –graduated in centigrade
Digital indicator cum controller ( electronic)
Auto-cut temperature mode on higher and lower side with alarm
Air circulation Fan
Operable at 220 Volts and 50 Hz.
Supplied with original manufacturers service manual
MEMMERT INCUBATOR - (Bacteriological digital incubator)
• Double walled, inner chamber made of 18 SWG stainless steel and outer body made of mild
steel, finished in powder coating.
• Inner chamber dimensions : 350-450 mm(H) X 350-450 mm(W) X 350-450 mm(L)
• Double door facility with inner door of glass.
• Heating elements on all three sides provided with three heat control switch.
• Temperature range from ambient to 70 OC
• Temperature uniformity ± 0.5 OC
• Temperature control ± 0.2 OC
• Digital temperature display.
• Power supply 230V ± 15%, 52Hz ± 3%
• Supplied with @ 3 perforated shelves and cord plug connector.
ANAEROBIC APPARATUS
•
•
•
•
Transparent unbreakable jar with 3.5 Liters capacity
Sturdy lid, clamp and sealing ring with built in safety features.
System with compound gauge.
Supplied with Stainless steel Petri-plate carrier, stainless steel test tube carrier and gas pack pkt.
15
DISTILLED WATER PLANT
•
•
•
•
•
Heavy gauge stainless steel-inside and outside - distillation unit, Vertical type
Capacity – 5 litre
With immersion type heater.
Brackets for wall mounting.
Automatic low level water cut off device.
pH DETERMINATION APPARATUS (DIGITAL PH METER)
•
•
•
•
•
Digital with LCD display
PH range from 4-14
Combined electrode
Resolution 0.1
Accuracy ± 0.01
MICROMETER EYE PIECES
•
•
•
•
•
•
•
•
Glass diameter: φ24
Material: Blue plate glass
Plate thickness: 1mm
Vapor deposition: Top surface
Diopter Adjustment Range: ±5 dpt
Stationary Scale: 8mm/8div
Movable Scale : 1mm/100div
Accuracy of Measurement: 0.01mm
MICROMETER STAGE
•
•
•
•
•
•
•
•
•
•
Mounted on stainless steel slide mount
With cover-glass
Supplied with protective cover
Graduated Scale of length 1-20 mm, subdivided giving smallest graduation of 10 micrometer
Thickness (mm) – 1.1-1.5
Thickness tolerance (mm) – ±0.1
Line width (mm) – 0.001
Line width tolerance (mm) – 0.001-0.005
Accuracy – 1-2
With Internationally traceable certificates of calibration
SPECIFICATIONS FOR GROUP – G
EQUIPMENTS
DISSECTING MICROSCOPE
•
•
•
•
Eye piece 10 x
Adjustable mirror
All brass chrome plated parts like pipe, knobs & lens holding arm. Magnification 10x and 20x
Optical lens binoculars, Wide glass stage having two stage clips & detachable hand rests
Wooden storing carrying case with fitting for lens
ICE LINED REFRIGERATOR (I.L.R.)
•
•
Temperature controlled by microprocessor controller.
CFC-free polythylene insulation course ·Superior refrigeration effect with an optimized
evaporator and condenser design.
16
•
•
•
•
•
Dual interior layer design features built-in ice packs to keep the chamber temperature at a range
of 2 to 8°C for up to 24 hours at an ambient of no warmer than 43 °C without power, presuming
the ice-packs are fully charged,
Meet WHO/UNICEF standards.·Ambient rating from 10~ 43 °C.
Temperature Control. Digital temperature display. Power on/off indicator. Cabinet temperature
range 2 °C to 8 °C.
Ergonomic Design. Safety lock to prevent unauthorized access. Stainless steel interior for
cleanliness and ease of use.
Drainage system for easy cabinet cleaning.
MICROSCOPE OIL IMMERESION
•
Hinged type horse shoe base inclinable from 1-90 degree Mechanical tube length: 160+1mm
triple revolving nose piece with click stop
•
•
•
•
•
•
•
•
•
Focusing by separate course & fine adjustment with graduated scale
Fixed square stage 120X120 mm with detachable mechanical stage
Sub stage Abbe's condenser NA 1.25 with iris diaphragm Swing out filter holder movable by
rack & pinion Illumination Built-in 12v 20 watt halogen with rheostat intensity control.
Base mounted on/off switch, heavy-duty 3-wire grounded electrical system and plug.
Adjustable down stopper to prevent accidental breakage of the specimen slide optical
combination
Eye piece objective magnification: 5X,10X,15X10X45X & 100X oil 100X-1500X
Huygenian (any two) achromatic Accessories: sub stage pin type lamp 20 W - 220V
Eye piece 10X WF Interchangeable Monocular Inclined tube inclined at 45 degree
Draw tube ; Co-axial Mechanical stage ; wooden cabinet with Lock & Key.
AUTOCLAVE
•
•
•
•
•
Electric vertical minimum size of 250X 450 and load 1.5 KW Should be double wall
Microprocessor based electricaly heated vertical steam sterilizer Pressure range 15-20 psi
adjustable Pressure control switch with digital display
Outer & inner chamber of stainless steel Inner chamber made of atleast 18SWG SS sheet Inner
chamber size 400X400X600mm or cylindrical with a Dia of 400mm and a height of 600 mm
Stainless steel steam jacket insulated with high grade glass wool
Water level indicator with automatic low water level cut off device Joint less gasket Water inlet
& drain valves with standard safety features Supplied with standard accessories
Power input 220-240 V/50 Hz AC Single phase 380-400 V AC 50 Hz Three phase fitted with
appropriate Indian plugs & sockets Certificate of calibration & inspection.
INCUBATOR, ELECTRIC
•
•
•
•
•
•
•
•
•
•
•
Width 45 cm, Diameter 45cm, Height 60 cm, Volume 125 lit. Microprocessor controlled
Temperature range: +5° C to 80°C
Interior chamber: Stainless steel for easy cleaning and decontamination
Digital display for temperature and time.
Timer: 1 min. to 100 hours and hold position.
Heating by natural convection for homogenous temperature distribution. Minimum turbulence
and no cross contamination.
Adjustable safety thermostat for temp set at 10C increment.
Temp Accuracy + 10C
Internal glass door for the observation
With minimum two adjustable shelfs.
Power 220-240 V; 50/60 Hz
BALANCE ANALYTICAL 200 GM
•
•
•
Analytical Balance, Capacity 200 Grams, Readability 0.0001 Gram Overall Length 8.4 In,
Overall Width 12.6 In, Overall Height 11.9 In Weighing Surface Width 3.3 In, Weighing
Surface Depth 3.3 In
Max 200 Grams, Application Modes Counting and Percent Weighing
Metal Housing Material, AC Power Unit, UL, cUL, CE Standards, Includes In-use Cover
17
SPECIFICATIONS FOR GROUP – H
EQUIPMENTS
COMPARATOR, NESSLER
•
•
•
•
•
•
•
•
A system for visual colorimetric chemical analysis suitable for both laboratories & field use
Features an adjustable base unit allowing it to be used directly with the comparator or with
nessleriser.
Day light cabinet Provides a constant & stable light source corrected to CIE standard Illuminant
C using a tungesten halogen lamp & a calibrated colour temperature correction filter.
Nessleriser attachment :accepts 2 Nesslers Cylinders, either 113 or 250 mm path length .
Nesslers cylinder glass 113mm & 250mm path length Matched pair Nessler cylinder stand
hardwood with opal glass base plate to hold 6 Nesslers cylinders.
Cells for comparator: Test tubes square 13.5 mm, 10ml plastic with stopper, Pack of 5 Optical
glass cell, rectangular, path length 5mm,25mm & 40mm.
Accessory glass colour standard & appropriate reagents.
Colour discs for comparator: ammonia, chlorine, hardness, nitrite, dissolved oxygen.
Colour disc for Nessleriser: Chlorine, Fluoride, dissolved oxygen.
CENTRIFUGE CLINICAL , HIGH SPEED WITH TELCOMETER
•
•
•
With max speed of 6000 RPM at 10/12 tube of 15 ml total square body
With lid lock manual type, speed control by analogue know, digital display of timer, power
consumption 500 watt, power requirement 220 V & 50 to 60 Hz, wt. approx 15 kgs
Total noiseless operation, non-vibration, complete with head & power lead
STILL FOR DISTILLED WATER
•
•
•
Casted aluminum, electrically operated wall mounting, body and condenser jointless.
Specially meant for pyrogen free distilled water. Fitted with automatic ejection heater.
Condenser and baffle cups are made of stainless steel.
EXTRACTION APPARATUS, FAT, COMPLETE
•
For determination of fat content of milk & milk products and common food items including
junk foods
HYDROMETRES, SPIRIT
•
270mm long, covering a range span of 0.050°, sub-divided in 0.001°
SALTERS BABY WEIGHING MACHINE
•
Capacity 25 Kg. + 100 gm ,material: metal
WEIGHING MACHINE ADULT
•
•
•
Capacity 150 kg + 0.5 kg
Size: 320mm X 62mm
Net weight 2.5 kg approx
FILTER, PASTEUR CHAMBERLAND, COMPLETE SET
•
Made of porcelain tube that contains a ring of enameled porcelain through which inflow pipe
fits the core of a porcelain pipe made up of metal pipe with holes through which water flows
out and is collected
18
FILTER, BERKE FED
•
•
Container capacity: 8 lit. Typical output per day : 80 lit.
CandleTwo in no. 2.75"x5" Imperial Supersterasyl ATC ceramic candle4, empty weight: 2.7
kg
HARPENDERS CALLIPERS (FOR SKINFOLD THICKNESS)
•
•
•
Dial graduation: 0 mm - 20 mm,Measuring range 0 mm – 80 mm measuring preasure
10gms/mm2
Repeatability 0 mm - 20 mm Accuracy 99%
Accessories - carrying case
STERILIZERS, ELECTRIC (MEDIUM SIZE)
•
300X150X100mm
HEIGHT MEASURING STAND
•
•
•
•
Frame work with metal material.
Fully folding stand with light weight.
100% accuracy with inches, millimeter and in centimeters measuring.
Maximum height measuring capacity is 210cm. Suitable for research purpose.
BAROMETER, FORTIN’S
•
•
•
•
Entire construction of metal.
The metric and English system scales read from 25” to 32” and 64 to 81 cms respectively with
reflector behind scale and cistern.
The Vernier is worked by a milled head of the side operating with rack and pinion and reads
0.1” 0.1 cm.
Mounted on wood with Aluminium pipes and Aluminium fitting with soda glass tube but w/o
thermometer.
BALANCE FOR WEIGHING FOOD STUFF CAPACITY 2 KG
•
•
•
Capacity: 2Kg. + 10g.
Size: 16cm x 14cm x 12cm
Unit Weight: 750gms. approx
HYDROMETRES, MILK
•
•
160mm long.
Scale calibrated in °SG, sub-divided every 0.001 and adjusted
at 15.6°C (60°F).
HYDROMETERS: (1) WET BULB (2) DRY BULB
•
•
•
Wooden Thermometer easy to use, read fast
270 x 80 x 10 mm; range:-10-50° C; Accuracy:1°C
Material: wood
SPECIFICATIONS FOR GROUP – I
EQUIPMENTS
DIGITAL KYMOGRAPH
•
•
•
•
Microprocessor controlled 10 speed variations.
Speed range 0.12 to 2.5mm per sec.
Presetable programs.
Time preset or rotation preset facility.
19
•
•
•
Soft touch controls.
Back lit LCD Display.
Memory function, supplied with 150 x 150 mm cylinder.
ANIMAL TROLLEY WITH 12 CAGES
•
•
•
Fabricated from 1 square hollow pipe & angle of S.S 304 quality material.
The racks are mounted on four heavy duty 4, dia castors for easy handling and quiet
transportation.
Complete with argon arc joints and mirror finish.
* Available to hold 24 animal cages of size: 29 x 22 x 14 cms. (LxBxH). Rack size: 39 x 12 x
60 (LxBxH).
STARLING’S LONG EXTENSION KYMOGRAPHS WITH TIME MARKERS. THE
IDEAL RESPIRATION PUMP (500 CC. CAP.)
•
•
•
Super Speed Kymograph.
Respiration Pump. 500cc. capacity geared motor coupled.
All Main’s A.C. Time
FLAME PHOTOMETER
•
•
•
•
•
•
•
•
Microprocessor Control with Filters, Na, K, Li, Ca,-Double display Filters-Narrow band-pass
interference filters for sodium, Potassium, Calcium and Lithium
available.
Power supply – Regulated Power Supply to take care of mains variation of voltages between
200 to 250 V Amplifier- Highly stable, High Gain all IC amplifier.
Display- large, Bright Seven Segment LED Panel meter to display 0-100 scale with negative
and over range indication.
Compressor- with built in regulator and Air Filter to deliver stable and moisture/oil free air
supplier.
Ignition System- Auto lgnition.
Atomiser- Non-corroding, easily accessible and can be cleaned without
putting out the flame.
Sample Take up rate- 5ml/min approximately.
Nominal Input Voltage- 220V, 50HZ
METABOLIC CAGES (DIEURETIC STUDY)
•
•
•
•
Classic metabolism cages with electronics to monitor the receptacles for food & water.
Each may be removed without disturbing the animal.
Optional infrared beam arrays can be mounted on either side of the cage to monitor coordinate
activity and rearing behavior.
Each cage is comprised of interchangeable parts which can be cleaned in a standard vivarium
wash station.
METAL MINCING MACHINE
•
Featured with noise free motor, and light weight body, fast cutting, corrosion resistance and
high tensile strength.
STIMULATOR ELECTRONIC ARTHUS THOMAS
•
Thomas Selectable pulse per second in different steps and pulse width, continuous variable volt
in multiple of 1 & 10 with Internal, External and Single pulse mode.
CHEMICAL BALANCE - SENSITIVE
•
•
•
•
(Micro) digital.
Balance beam scale, Capacity: 120g/0.01g; 220g/0.01g; 320g/0.01g ;
620g/0.01g ; 1200g/0.01g ; 2200g/0.01g; 3200g/0.01g.
Power: AC/DC with lithium battery.
Display: LCD/LED with back light, Pan Size: diameter 130mm
20
AUTOCLAVE ELECTRIC
•
•
Size 550x750 mm Seamless made of thick aluminum provided with safety valve, pressure
gauge for the pressure inside the unit, steam releasing valve, electric heater running on 220v,
50hz, the electric heater 3kw capacity, bakelite handle to carry the unit, unit based on heavy
metal three leg stand, supplies with power cable and one spare gasket and one spare heating
element.
To be provided with pressure gauge, steam release cock, spring to any required point from 10
psi to 20 psi with accuracy, a drain cock, a double safety valve along with water inlet.
COPPER TRAYS
•
Size: 10” x 8” x 1”
DEIONIZER
• Two of capacity 20 litres per hour and 6 litres per hour (mixed bed type) connected in series
ASSEMBLY FOR MAMMALIAN CLASSES
•
•
A versatile assembly serving both for heart perfusion and as on all-purpose thermostatic organ bath.
•
•
Thermostatic sensitivity 2C.
•
A perspex connection box is fitted to the bath frame, and carries all the electric leads and
connections.
•
•
Two pilot lamps indicate the thermostat and stirrer operation.
The transparent perspex bath is 12"x9"x8" and rests on a metal stand: A 1"x3/8" thick edge at the
top makes clamps etc. carrying the uprights and Temperature of the bath is regulated
(CONSTANT).
The stirrer unit is completely independent, and dips into the bath in one corner, and fixes on its
special stainless steel upright.
Extra accessories to enable the unit to be used as an all-purpose organ bath (2 unit) are:
1.
2.
3.
4.
5.
6.
Double set of glass inner vessels.
Oxygen tubes.
Warming coils.
Levers with stainless steel capillary.
Four uprights with boss heads.
X blocks.
Complete assembly with upright stand, double reservoir, mercury manometer.
MICROSCOPES ORDINARY
•
Laboratory Microscopes, tube length 160 mm with smooth rack and pinion coarse adj.
graduated fine motion, with 2 Huy. eyepieces x10 and x15 (or x5) Achromatic objectives x10,
x45 (SL) and x100 Oil Immersion objective with imported capsule mounted by us; built in
graduated Mechanical Stage, NA 1.25 condenser with iris with rack and Pinion adj. filter
holder with day light filter plano concave reflecting mirror moving in gimbals.
BRODI’S OPERATION TABLES
• Modern Experimental Operating Table.
• Now with all steel frame designed for greater stability.
• Stainless steel top 127x45 cm. in two halves slopping towards the central drain, warming chamber,
castors, moving handles, with animal holder, stainless steel tray and two uprights.
ASSEMBLY FOR PERFUSION APPARATUS FOR MAMMALIAN HEART
• With double thick organ bath system and complete set of glasswares and accessories.
ALL GLASS DISTILLATION APPARATUS CAP.2 LITRES
•
•
Automatic Electrically Heated, all Borosil glass distillation apparatus with heavy metallic
stand, plug and cord operable on 220V AC.
Auto cut device & double stage.
21
DISSECTION INSTRUMENT
•
•
Sets containing Surgical Standard Scissors-2,Curved Scissors-2,Pointed Scissors-2, Artery
forceps-2, Mosquito Artery forceps-2, Scalpel handle-2, Plain forceps-2, Toothed forceps-2,
Small retractors-2 etc.Probes-2,hooks-2.
To be supplied with proper cover and box.
COOK’S POLE CLIMBING APPARATUS
•
•
•
•
Should be having 2(two) chambers, an outer chamber made of thick plywood sheet with an
observation window and inner animal chamber made of clear acrylic sheet with a brass bar at
the bottom.
A built in shock of 200V AC ,50 Hz single phase with min of 0.2mA and is to be controlled by
min of 11 position solid state timer up to 30 seconds.
Should be having output terminal for kymograph/recorder.
Animal dropping tray to be provided to keep the equipment clean.
VACUUM & PRESSURE PUMP CENCO
•
Single stage oil sealed air cooler V-belt and mounted on a base plate with belt guard etc. with a
suitable HP motor operable on 220V AC. Displacement lit. /minut.
AUTOMATIC ELECTRIC RECORDING DRUMS
•
New Super Ten Electrical Kymograph: For Pharmacology and Drug Assay; close mesh gear
train; 10 speeds; 1 rev. in 1 min. to 1 rev. in 12 hours 30 minutes.
•
•
•
•
•
Speed selection through a convenient dial knob.
Special heavy duty motor.
No backlash no slow starting on slow speeds.
Jerk free movement.
Stainless steel spindle with screw lift 15x15 cm cylinder with leveling screws, pilot lamp, plug
and cord.
ELECTRO-CONVULSIOMETER
•
•
•
•
Should be able to use for producing minimal and supra minimal seizures required
for assaying of anti-epileptic and anticonvulsant drugs.
Should provide minimum 50Hz stimulus current which can be adjusted 0.15mA to 330mA in steps,
with one pair corneal electrode 4,6 or 8mm cups.
And one pair of ear clips work on 220 A.C.
Should contain electronic timer device from 0.1 to 3 seconds in steps to control the stimulus current
and LED indicator for duration of stimulus.
INCUBATORS
•
•
•
•
•
•
Single door with glass window.
S.S. inner chamber.
Sleeves from stainless steel mesh.
Heaters on three sides.
Temperature upto 80 degree C with Prismatic Glass Thermometer L shaped.
Inner Chamber size 40x40x40 cm. (16”X16”X16”)
INCUBATOR ELECTRIC
•
•
•
•
Size 14” x 14” x 14”.
These are controlled by thermostat of hydraulic cabinet to sensitivity of 800c with 10c beaded
heating elements which are placed at sides and bottom in the ribs.
These incubators are doubled walled, inside wall with stainless steel or aluminium and outside
wall with enamel painted mild sheet and door with double viewing glass.
Apart from these, incubators are built in l shape horizontally consist tow pilot lamps, shelves,
with on/off switch working on 220/230 volts a. C, equipped with digital temperature control
indicators
22
ROTAROD ASSEMBLY
•
•
•
•
•
With 3 digit counter
Should have 5 chambers, 75mm width each with a rotating rod of 25mm diameter having
speeds of 5,10 15,20 and 25 r.p.m.
Digital rpm indicator and digital time counters.
Each counter runs from the beginning of the test until the animal falls from the drum to the
lane.
Electronic change of speed from 4 -120 rpm.
FOUR UNIT ISOLATED ORGAN BATH PALMER F.67
•
•
•
•
•
•
•
•
Organ bath tube.
Reservoir coils.
Tissue holders.
Water circulation pump - for maintaining uniform temperature.
Gas diffusers (aerator controllers)
Temperature controllers: analogue or digital (as per model)
Frontal writing lever.
Couplers set four sets of glass inner vessels. Oxygen tubes, warning coils, fixit levers and holders.
BALANCE SEMI MICRO
•
•
•
•
•
•
•
•
Easy access doors, PAN SIZE 2.5 TO 5 INCH, CAPACITY 100 GM.
Advanced stabilization software.
System Diagnostic.
Underhook capability.
LCD (Liquid Crystal Display) Display.
0.01mg Semi-Micro Resolution.
Splash Proof Keyboard & Display.
GLP/GMP/ISO Compliance.
B.P. APPARATUS
•
Aneroid Sphygmomanometer Apparatus with wheels Mercury-free Square shape dial approx.
145mm x 145mm Adjustable height of stand Adjustable gradient for easy reading Five (5)
wheels equipped with stopper for anti-slip mechanism Standard cotton cuff 2 tube adult latex
bladder Standard latex bulb Air release valve with spring Standard end valve Spiral PVC tubing
(1.8m).
ACTOPHOTOMETER
•
•
•
•
Actophotometer with 3 digit display
The frame is equipped with 32 infrared photocells, 16 placed in axis X and 16 placed in axis Y.
The Photocell work at a wavelength of 950 nm and its information is multiplexed at a rate of
40Hz.
Hole board plate is provided with 16 holes of diameter and detection depth 1, Should contain
incorporated electric shock facility (variable) 0 to 100 volts for activating rats and indicating on
meter. cm.
HOT AIR OVEN
•
•
•
•
•
•
•
•
•
•
Size 14”x14”x14”
Lab model with three side heating elements
Construction: with double walled construction.
Inner chamber made of Aluminium or stainless steel sheet.
Outer chamber is made of mild steel sheet, finished with powder coated paint.
The gap between the walls is filled up with special grade glass wool for proper insulation to
avoid heat losses.
Inner chamber has ribs for placing the shelves at convenient levels.
Supplied with 2 or 3 removable shelves.
It is fitted with heavy hinges with a ball catcher, spring loaded door closing device.
Door is duly insulated.
23
•
•
•
•
•
•
•
•
Elements: heating elements are made of high quality nickel/chrome plated nichrome wire
which are put inside beads and placed at the bottom and in both the side ribs for uniform
temperature all over the work space.
Temperature Control: temperature is controlled by imported capillary type thermostat from
50°C to 250°C +/- 1°C.
Temperature control knob is graduated in centigrade degrees.
Ovens are supplied without thermometer.
Ventilation: air ventilators are placed near the top of the both sides to remove hot gasses and
fumes if any.
Control Panel: comprising of switch to ON/OFF the power, switch to select high or low rates
of heating, thermostat control knob and indicators for mains and thermostats.
Supplied with cord and plug. Suitable to operate on 220 volts, 1ph, 50Hz, AC Supply.
Optional Accessories: Air circulating pan, digital display temp indicator, digital display temp
controller cum indicator in lieu of thermostat., microprocessor based PID temp. controller cum
indicator in lieu of thermostat., L shaped thermometer (Mercury) or straight type.
SUCTION PUMPS
•
•
•
•
•
•
•
1 / 4 hp heavy duty motor fitted to oil immersed vacuum pump.
Two wide mouth glass bottles of approx. 1600 ml each.
Synthetic airtight rubber lids.
Non-collapsible pvc tubing.
Two separate vacuum gauge for each system.
Vacuum of electric suction 700 mm + 10mm hg.
Complete vacuum of vertical foot suction 600 mm hg.
ANTIHISTAMINE CHAMBER WITH MANOMETER
•
Should be a complete Histamine aerosol apparatus having a Acrylic box with nebulizer
Sphygmomanometer and Chloroform bellows for assay of antihistamine drugs on Guinea-pig
etc.
MANOMETERS MERCURY PALMER C-200
•
•
All Manometers are fabricated from true-bore Borosilicate glass, floats are perfectly lapped to
eliminate leakage and are fitted with feather weight Stainless Steel capillary.
Standard Mercury Manometers : Without stopcock, with adjustable scale.
CAUTERY MACHINE, ELECTRIC BLENDSONE
•
•
•
•
Constructed on heavy cast iron angles covered with thick gauge mild steel sheet duly powder
coated.
Electrically operated. Stainless Steel Top.
Adjustment of the cutter for upward & downward position.
Total unit on casters for easy mobility.
ANIMAL BALANCE TRIPLE BEAM
• This Balance provides sensitivity and long service by use of covered, self-aligning agate
•
bearings and precision hardened knife edges.
Magnetic damping speeds weighing by quickly arresting beam oscillation without affecting
sensitivity or accuracy.
FILTERING APPARATUS SIETZ FILTER AND MILLIPORE FILTER
• Made from solid S.S. bar for effective filtration of all types of liquids.
• Capacity min of 14cm to take 140mmfilter pad cap.500ml.
• To be supplied with filter pads 50 nos.
SPECIFICATIONS FOR GROUP – J
EQUIPMENTS
COLORIMETERS
•
•
Filter photo Colorimeter Digital Photo.
Colorimeter with 8 filters, mains operated.
24
ANALGESIOMETER
•
•
Radiant heat type with digital timer
•
•
Plate temperature can be held at a set point between above ambient to 70°C (+/- 0.2ºC).
•
•
Remote foot-switch controls the test start/stop allowing rapid Hands-free experiments.
Thick pure aluminum plate (12mm) provides a very high temperature stability and even surface
distribution.
A built-in timer activated by an external foot switch allows the precise measurement of the reaction
time (0.1 sec resolution).
Provided with the calibration certificate of the temperature indicator.
PLAIN STAND
•
•
Plain stand : 38cms.
High Stainless upright.
CHEMICAL BALANCE-ORDINARY
•
•
•
(Analytical) with weight box.
Best quality with divided doors show case, capacity 250 gms.
Sensitivity 1-2 mgm having all stone agates fitted in open graduated beam.
WATER BATH, METAL
•
3 inch diameter, Thermostatically controlled double walled, complete with contact thermometer
and stirrer.
DISPENSING BALANCE WITH METRIC SYSTEM WEIGHTS
•
•
50 gms with s.s pans, Single Brass beam equal arm double Pan with extended support balance
with metric system weights Should be in Teakwood case on wooden/formica base.
Capacity 250gms.,sensitivity 1mg.
DIGITAL PH METER
•
•
•
•
•
•
•
•
•
•
•
Digital Electronic (Table/ hand held model); comprehensive range of PH meters which includes
digital PH meter, Hand held PH meter, PH testing meter etc.
PH meters are made up using best quality parts and equipments.
PH Range: 0-14PH.
Mill Volt range: 0 to 1999mv.
Resolution: 0.01ph, 1mv.
Repeatability: +/- 0.01PH +/- 1mV.
Accuracy: 0.01 PH+/- 1 digit, 1mV +/- 1 digit.
Temperature compensation: 0 to 100deg C.
Operating temperature: 10 Deg C to 50 Deg C.
Display: 3.5 digit LED display.
Accessories: Electrode, Stand, dust cover and instruction manual.
LONG EXTENSION FOR PAPER PALMER A-130
•
•
•
Should be able to take paper min. of 2 meters length and consists of a bar upon which one
cylinder can slide.
The arm should be forked to be slided over the drum and leg fixed in position.
Levelling screws should be provided for accurate alignment with drum.
TEMPERATURE CONTROLLED WATER BATH 37°C
•
•
•
•
Thermostatically controlled, double walled.
Glass window on two opposite sides contact thermometer with relay.
Complete with stirrer.
Size not less than 450 x 375 x 375(18” x 15” x 15”)
25
VORTEX MIXER
•
•
•
•
Designed with a heavy cast aluminum body to provide optimum bench-top stability.
The mixer has two modes of operation: Continuous operation when you need to mix a quantity
of tubes in sequence; intermittent operation is activated by touching the cup attachment with a
test tube.
Equipped with a single tube mixing cup for single tube mixing and a soft foam pad and mixing
platform for mixing 1 - 4 test tubes simultaneously.
To be supplied with a fractional workable motor on 220V AC completed with indicator, plug &
cord
MACHINE FOR BIG ANIMALS LIKE DOGS (>5 KGS)
•
•
Animal weighing scale; livestock scale: Slipproof -pan, waterproof-design, with railing and door.
High legs for rough ground.
APPARATUS FOR ISOLATED RABBIT INTESTINE ETC.
•
•
A cylindrical copper bath with heating element controlled by thermostat.
•
Fitted on teak base board.
Complete unit with uprights, glass inner vessel & Oxygen tube with platinum tip frontal lever from
SS capillary tubing.
INSTRUMENTS STERILLISER ELECTRIC
•
•
•
Size 12” x 8” x 6”.
Provided with timer from 1 to 60 Min with double safety valve, steam releasing valve, pressure
gauge for the pressure inside the chamber, and one pressure gauge to show the pressure of outer
chamber both the chamber made of stainless steel lid of the unit made of heavy duty gun metal
piece for extra safety, gasket, water level indicator to see the water inside, heavy duty power
plug with socket provided with the unit.
Should be able to sterilize day to day Blunt Surgical Laboratory Instruments.
MICROSCOPE STUDENTS TYPE WITH MECHANICAL STAGE AND OIL
IMMERSION.
•
•
•
Laboratory Microscopes, tube length 160 mm with smooth rack and pinion coarse adj.
graduated fine motion, with 2 Huy.
eyepieces x10 and x15 (or x5) Achromatic objectives x10, x45 (SL) and x100 Oil Immersion
objective with imported capsule mounted by us; built in graduated Mechanical Stage, NA
1.25 condenser with iris with rack and Pinion adj.
filter holder with day light filter plano concave reflecting mirror moving in gimbals.
HOOK GRIP RODS
•
•
Muscle Grip with 6mm Dia.
Stem to fit boss heads.
PLETHYSMOGRAPH ASSORTED
•
•
•
•
•
High Resolution Volume.
Resolution:0.01ML, Accuracy+/-0.01ml.
Easy to use Pedal switch.
LCD Graphic Display.
Connectivity to computer.
MAGNETIC STIRRER B.T.L.
•
•
•
•
•
•
The stirrer with a hot plate is made of metal sheet with stainless steel top which serves as a hot
plate.
Its stirring and heating units are thermally insulated with asbestos sheet laminated with asbestos
cement.
It is fitted with an electronic regulator to control the speed of the stirrer.
A energy regulator adjust the heating of the hot plate.
The apparatus work on 220/230v ac.
Laboratory magnetic stirrer is finished in oven baked paint.
26
MACHINE FOR SMALL ANIMALS LIKE RATS AND GUNEA PIG ( UPTO 5KG’S)
•
•
Animal weighing scale; livestock scale: Slipproof -pan, waterproof-design, with railing and door.
High legs for rough ground.
JACQUETS GRAPHIC CHRONOMETER
•
To record the timelines for respiration in animals etc.
TABLET DISINTEGRATION MACHINE GLASS TUBING (LENGTH OF 6 FT.)
•
•
•
•
Hooper diameter of minimum 2”.
Should be fitted with min 4 steel hammers fixed to a disc and Shaft being revolved at the speed of
3000 RPM.
Rotation in vertical manner is made by FHP Motor which carries a specially designed Basket to hold
6 Nos. of Tablets/Capsules under specified weight, moving vertically in temperature controlled glass
vessels/Beakers placed on Hot Plate.
having special type of starter facility operatable on 220 Volts AC supply.
WATER BATH 4 HOLE ELECTRICALLY HEATED
•
3 inch diameter, Thermostatically controlled double walled, complete with contact thermometer
and stirrer.
VARNISHING TRAY WITH FOOT LEVER
•
Size 14 inch x 20 inch, Should be able to use for varnishing purposes of smoked papers
DISTILLATION APPARATUS
•
Manesty type with spare heater.
DISTILLED WATER STILL MANESTY ELECTRICAL
•
•
•
•
Cap. 2 gallo per hour
Manesty type, stainless steel construction.
Electrically operated capacity 4 lit./hr.
Heater of 4 KW capacity.
WARING BLENDER M.S.E.
•
•
•
•
•
•
Double con, Warings sealed, precision, hi-tech ball bearing system Easy to clean electronic
membrane control panel with Pulse Mode provides precision operation.
The Standard in Quiet Operation.
Waring encases its industry-leading 3.75-HP motor for quiet operation.
The Standard in Stability.
Deeper, wider, full traction rubber non-skid feet keep the blender stable.
Container Stainless steel with stainless steel blades - stainless steel clamp-on lid with rubber
gasket and stopper.
CENTRIFUGE ELECTRIC INTERNATIONAL R.P.M. 3000
•
•
•
•
•
•
•
Digital speed indicator
Step less speed regulator with zero start switch.
Digital automatic timer 0-99 mts.
Dynamic brake.
Unbalance cutout switch.
Brush wears indicator
Castors for full mobility
27
•
•
•
•
•
•
Lid-interlock.
Digital temperature indicator-cum controller.
Hermetically sealed refrigeration unit.
Key operated mains switch.
The centrifuge lid should have electrical interlock.
Lowest temperature 00 C, 3.2 KVA.
TETANUS SET PALMER H2O
•
Complete unit on two stands with mercury cup and magnet.
STANDARD X BLOCK
•
•
Machined from solid brass rod.
To hold 9mm and 6mm dia rods.
MECHANICAL STROMHUR
•
Ludwig's "Stromuhr" consists of a XJ- shaped glass tube dilated at a and a', the ends of which, h and
i, are of known calibre.
•
•
The bulbs can be filled by a common opening at k.
The instrument is so contrived that at b and b', the glass part is firmly fixed into metal cylinders,
attached to a circular horizontal table.
CONDONS DROP RECORDER – PALMER B-75
•
Three Silver spirals
PNEUMOGRAPH PALMER E
•
ECorrugated rubber tube with side clips, open link chain
ONCOMETER KIDNEY
•
Kidney oncometer, for measuring blood flow through the kidney.
RAZOR HONE
•
Razor Hone double sided (Coarse & Fine) motorized
TRACHEAL CANULA METAL PALMER E.76
•
•
Made of Brass with adjustable Air-vent.
Should be able to use for endo-tracheal intubation of big animals like Dog & Cats.
28
ANNEXURE-I
TENDER FOR THE SUPPLY OF EQUIPMENTS & INSTRUMENTS REQUIRED FOR
USE IN THE ESIC MEDICAL COLLEGE & PGIMSR, K.K NAGAR, CHENNAI-78
To
The Medical Superintendent
ESIC Hospital
KK Nagar
Chennai-78.
Sir,
Sub: Forwarding of Tender documents for Equipments & Instruments. Reg
********************************
We have pleasure in submitting our tender for __________________________________
We enclose herewith a Demand Draft No._________Dt__________for Rs.__________
drawn in favour of the Medical Superintendent, ESIC Hospital, K.K Nagar, Chennai-78 towards
Earnest money Deposit.
We bind ourselves to the conditions prescribed in the Tender Notification.
We agree to have the Earnest money forfeited in case of failure in full or part to undertake
the contract upon the acceptance of this tender.
OFFICE SEAL:
SIGNATURE:
DESIGNATION:
NAME & ADDRESS:
29
Annexure II
TERMS AND CONDITIONS FOR THE SUPPLY OF EQUIPMENTS & INSTRUMENTS
1. Sealed tenders will be received up to and including the date stipulated by the Medical Superintendent,
ESIC Hospital, K.K Nagar, Chennai -78 for the purchase of Equipments & Instruments.
2. FOR SINGLE BID SYSTEM.
The sealed envelope containing the completed tender super scribed as “SINGLE BID TENDER
FOR THE SUPPLY OF EQUIPMENTS & INSTRUMENTS GROUP _________(Group
name)____________________
(Name
of
Equipment)
for
the
Department
of
_____________________(Name of the department) Due on _______________ (Last date of
submission) “ should be addressed to The Medical Superintendent, ESIC Hospital, K.K Nagar,
Chennai-78.
3. FOR DOUBLE BID SYSTEM.
The sealed envelope containing the completed tender super scribed as
“TECHNICAL BID FOR THE SUPPLY OF EQUIPMENTS & INSTRUMENTS GROUP
_________(Group name) ____________________ (Name of Equipment) for the Department of
_______________________(Name of the department) Due on ______________(Last date of
submission)” on first envelope and
“PRICE BID FOR THE SUPPLY OF EQUIPMENTS & INSTRUMENTS GROUP
_________(Group name) ____________________ (Name of Equipment) for the Department of
_______________________(Name of the department) Due on _______________(Last date of
submission)” on the second envelope.
Both the envelopes are again to be sealed and put in a single envelope super scribing
“TENDER FOR GROUP_________(Group name) ____________________ (Name of
Equipment) for the Department of _______________________(Name of the department) Due on
______________(Last date of submission) should be addressed to The Medical Superintendent,
ESIC Hospital, K.K Nagar, Chennai-78.
4. Postal delays if any, will not be condoned.
5. Tenders will be opened at the office of the Medical Superintendent, ESIC Hospital, K.K Nagar,
Chennai-78 on the stipulated date & time in the presence of the tenderers/representatives who choose
to be present.
6. The two part bids i.e. Techno-commercial and price bid prepared by the Bidder shall comprise the
following:
A. Techno-commercial Bid (Unpriced Bid): This should include the following:
• Bid security (EMD) should be furnished in accordance with instructions.
• Detailed technical specification of items quoted along with the catalogue/literature, make and
model of the equipments offered without indicating price.
• Statements of Deviations from tendered Commercial conditions, if any.
• Statements of Deviations parameter wise from tendered specifications, if any.
• Authority letter from manufacturer in case bid is submitted by agents.
• Bidders have to indicate the name and address of the bankers.
• Documentary evidence that the goods and ancillary to be supplied by the bidder are eligible
goods and services and conform to the bidding documents.
B. Price bid:
• The information given at Techno commercial bid should be reproduced in price bid with
prices indicated. Any deviation in this regard will render the bid liable for rejection.
• Rates should be typed in words as well as in figures, free from erasing, cutting and
overwriting.
• Price quoted should match with the items quoted in technical bid.
• Each and every page of the quotation should be separately numbered and duly signed.
• In case the price quoted cannot be matched with the item/s quoted in technical bid, the bid
shall be liable to be rejected.
• Rates and Sales Tax/ VAT must be quoted separately. The price should be all inclusive
lump sum price offered for each item including cost of the equipment, freight, Insurance,
transit insurance, packing forwarding etc. and including charges for installation and
commissioning with all men and material required for the same and including charges for the
quoted warranty period.
• The rates quoted should be F.O.R ESIC Medical College & PGIMSR, K.K Nagar, Chennai 78. No other charges in addition will be payable on any account over and above the lump sum
30
•
•
•
•
•
price quoted in the price bid. The rates quoted in ambiguous terms such as “Freight on actual
basis” or “Taxes as applicable extra” or “Packing forwarding extra” will render the bid liable
to rejection.
In the two-bid system, only Techno-commercial bid (un-priced bid) will be opened first on
the date mentioned in the presence of bidders who choose to be present. The price bid of the
firm whose equipment is technically viable fulfilling the specifications and all other
conditions alone will be considered for evaluation.
For goods offered from abroad, the prices in the corresponding price schedule shall be
entered separately in the following manner:
a) the price of goods quoted FOB port of shipment
b) the amount of freight and insurance and price of goods quoted CIP port of entry in
India
c) the price of goods quoted should be on DDP basis at consignee site in India as
indicated in the Price Schedule and Consignee List;
d) wherever applicable, the amount of custom duty with CDEC applicable on CIP value
on the goods to be imported; ESIC will issue Customs Duty Exemption Certificate
(CDEC) where applicable.
e) the charges for Loading/Unloading, Inland transportation, Insurance and other local
costs, Incidental cost to delivery of the goods from the port of entry in India to
Consignee Site shall be borne by the tenderer.
A Certificate that the quoted items have not been supplied to any other
organization/institution at a rate, lower than quoted here should be enclosed.
For imported goods, the price quoted shall not be higher than the lowest price charged by the
tenderer for the goods of the same nature, class or description to a purchaser, domestic or
foreign or to any organisation or department of Govt. of India.
If it is found at any stage that the goods as stated have been supplied at a lower price, then
that price, with due allowance for elapsed time will be applicable to the present case and the
difference in cost would be refunded by the supplier to the purchaser, if the contract has
already been concluded.
7. Tender currencies
•
8.
9.
10.
11.
12.
13.
14.
The tenderer supplying indigenous goods or already imported goods shall quote only in
Indian Rupees.
• For imported goods if supplied directly from abroad, prices shall be quoted in any freely
convertible currencies say USD, Euro, GBP or Yen. As regards price(s) for allied
services, if any required with the goods, the same shall be quoted in Indian Rupees only
if such services are to be performed /undertaken in India.
• Tenders, where prices are quoted in any other way shall be treated as non-responsive and
rejected.
Bid Security (EMD)
The tender must be accompanied by EMD as mentioned against the equipment in the form of
Demand Draft only drawn in favour of The Medical Superintendent, ESIC Hospital. K.K Nagar,
Chennai-78, payable at Chennai. The tenders not accompanied by EMD is liable for rejection. For
EMD exemption, if any, necessary documents for exemption should be submitted, otherwise tender
will be liable for rejection. Advance stamp receipt for the refund of EMD should be enclosed with the
tender documents.
The tender should be type written and every correction in the tender should invariably be attested by
full signature by the tenderer with date before submission of the tenders to the authorities concerned
failing which the tender is liable for rejection.
Either the authorized Indian agent on behalf of the principal/OEM or principal/OEM itself can bid but
both cannot bid simultaneously for the same item/product in the same tender.
If an agent submits bid on behalf of the principal/OEM, the same agent shall not submit a bid on
behalf of another principal/OEM in the same tender for same item/product.
Copies of purchase order for having supplied to Government Hospitals / reputed institutions should
be enclosed. The rates quoted in the purchase order should not be deleted or made illegible. A
certificate duly authenticated from any other users of the equipment about satisfactory performance
should also be enclosed.
Firms should also give a certificate that spares/ consumables/ reagents of the equipment quoted will
be freely available at least for five years after warranty period.
The rates quoted should be valid for one year from the date of approval of the tender by the
competent authority.
31
15. Only the item/s of manufacturers or their authorized distributor/stockist would be considered.
16. Successful bidder shall not be entitled to any rate revision of price for any reason except that allowed
by Government of India.
17. For the equipment where reagents, cartridge, consumables, etc. are required. The price bid must
include: A) Rate list indicating the prices and packing prevalent on date of tendering. B) List
indicating cost and life of consumables C) The rate for reagents, consumables etc. should remain
constant during the warranty period.
18. The equipments should be Guaranteed/ Warranted (Comprehensive) for a minimum period of
three years from the date of satisfactory installation and inspection.
19. Tenderer should be able to demonstrate the product quoted by him to the Technical Evaluation
Committee in Chennai within the stipulated period as and when asked for.
20. The company will get only one chance for demo. In case the company fails to arrange the demo the
tender shall liable to be cancelled.
21. The date for demonstration shall be fixed with mutual consent on telephone/e-mail and the same shall
be confirmed in writing or by fax. In any case not more than two weeks time shall be given to arrange
for demo.
22. The successful bidder should furnish Performance Security Deposit @ 10% of the value of the
contract.
23. Photocopy of latest ITR/ PAN No. should be enclosed with the completed tender.
24. Firm should undertake to enter into Annual Maintenance Contract (AMC/CMC) for equipment as
well as for accessories attached, for minimum period of five years after completion of warranty
period and accordingly quote the rates of AMC/CMC for five years. The rates for AMC (Labour)
should not exceed 3% and for CMC should not exceed 10% of the unit cost and should remain
fixed for five years. Firm should undertake to keep the equipment in running order throughout the
year and in case of equipment going out of order during warranty/AMC/CMC the fault will be
attended within 24 hours and rectified within 7 days of lodging the complaint.
25. If the equipment needs calibration, the firm shall be responsible for calibration as part of CMC/AMC.
26. The Medical Superintendent, ESIC Hospital, K.K. Nagar, Chennai-78, will be at liberty to terminate
the tender proceedings without assigning any reasons thereof. The bidder will not be entitled for any
compensation whatsoever in respect of such termination.
27. One copy containing terms and conditions and schedule of this tender should be signed by the
tenderer at the bottom of each page with the office seal duly affixed and returned along with the
tender.
28. Declaration form and Company profile formats enclosed must be filled in and signed by the tenderers
and enclosed along with the tender. Tenders received without the Declaration form shall not be
considered.
29. No articles shall be supplied to the Hospital except on requisition in writing signed by the Medical
Superintendent or by an officer authorized by him/her in writing to do so.
30. The contract should not be sublet without the prior written permission of the Medical Superintendent.
31. For imported items, Customs duty exemption certificate, wherever applicable, will be issued by the
Medical College & PGIMSR and the price to be quoted accordingly. The tenderer will assist in
opening of Letter of credit for an amount of 90% of the cost of the instruments and undertake all the
activities related to release of equipments from customs in the presence of an official of ESI
CORPORATION and deliver the same at central stores on the same day of release from the customs.
Any demurrages on account of delayed clearance from the customs will be borne by the tenderer. The
Medical College & PGIMSR will provide all the documents necessary for clearance from the customs
and the same should be indicated by the tenderer.
32. BIDDERS ARE FREE TO QUOTE FOR ONE OR MORE EQUIPMENTS BUT SEPARATE
ENVELOPE FOR EACH EQUIPMENT SHOULD BE USED AND SEPARATE DEMAND
DRAFT TOWARDS EMD FOR EACH EQUIPMENT SHOULD BE ENCLOSED, FAILING
WHICH THE QUOTATION FOR THAT EQUIPMENT WILL BE TREATED AS
UNRESPONSIVE AND SUMMARILY REJECTED. QUOTATIONS FOR SEPARATE
EQUIPMENT BY THE SAME BIDDER SHOULD BE SUBMITTED IN SEPARATE
ENVELOPE AND SHOULD NOT BE PUT IN A COMMON COVER.
33. TENDER DOCUMENTS THAT ARE BEING SUBMITTED IN PERSON ARE TO BE DROPPED
IN THE TENDER BOX KEPT IN THE FIRST FLOOR OF ESIC HOSPITAL.
32
34. Bidders in their own interest shall ascertain the eligibility of whatsoever concessions and exemptions
are eligible and applicable to the Medical College & PGIMSR and shall advise the purchaser and
quote accordingly.
35. Delivery Schedule.
Within 60 days after placement of supply order. The delivery should be at the place shown by
the receiving officer within the premises of the Medical College at the cost of the supplier. For
imported items an enhanced delivery period, if required can be agreed and the same should be
indicated clearly. If the successful tenderer fails to execute the supply within the stipulated period,
penalty of 2 % of the value of the order will be levied for a delay of one week or part of the week
subject to a maximum of up to 10%. Failure to execute the supply will lead to cancellation of supply
order and the Performance security will stand forfeited.
36. The payment towards the supply is subject to receipt of inspection note/performance certificate to the
effect that the items supplied are conforming to the supply order placed.
MEDICAL SUPERINTENDENT
33
Annexure III
COMPANY PROFILE
1. Name of the firm
2. Full address
3. Telegraphic Address
4. Telephone no.
5. Tele/Fax no.
6. Date of establishment of firm
7. Is your firm registered under
•
The Indian Factories Act
•
Companies Act
•
Any other Act
8. Name & address of your Bankers.
Stating the name in which the
Account stands
9. Are you on the list of approved
Contractors of any other authority
(if so please give details)
10. Give details of any Govt. contract
Executesd during the last 12 months
11. Are you a Manufacturer If so
Please furnish the items you
Manufacture
12. Are you a small scale industry
Registered with appropriate
Authority.
13. Are your products certified by ISI?
If so furnish details
14. Any other information which you
Consider necessary to furnish
DATE
SIGNATURE:
NAME & ADDRESS:
34
Annexure IV
DECLARATION FORM
We_________________________________________________________ having our office
at _____________________________________________________________ do declare that we have
carefully read all the conditions of Tender for the supply of ___________________________________ and
abide by all the conditions set forth therein by the Medical Superintendent, ESIC Hospital, K.K Nagar,
Chennai-78.
We further declare that we ______________________________possesses valid license bearing
No ____________________________________________Valid upto _______________
DATE:
SIGNATURE:
SEAL:
NAME & ADDRESS:
35
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising