Whac A Mole SE Manual

Add to my manuals
29 Pages

advertisement

Whac A Mole SE Manual | Manualzz

SPECIAL EDITION (SE)

OPERATION MANUAL

Version 3

©2011 Bob’s Space Racers Incorporated

427 15 th

Street, Daytona Beach, Florida 32117

Tel: (386) 677-0761 Fax: (386) 677-0794

Table of Contents (for online viewers click

Back to TOC” at anytime to return to this list)

MODEL VIEW ............................ 2

SPECIFICATIONS ..................... 3

Rated power supply: .............. 3

Power consumption: ............... 3

Dimensions:............................ 3

Weight: ................................... 3

INTRODUCTION ....................... 4

Overview ................................ 4

Features: ................................ 4

GAME PLAY .............................. 4

IMPORTANT SAFETY

INFORMATION.......................... 5

SET UP ...................................... 5

PACKAGE CONTENTS ............ 6

INSTALLATION......................... 7

Play zone (Operation Zone): .. 7

Locations to avoid: ................. 7

GAME LEVELING ..................... 8

CONNECTING THE POWER

CORD ........................................ 9

INSTRUCTION FOR PLAY ..... 10

PROGRAMMING OPTIONS ... 10

Steps for Programming ........ 10

Programming Chart .............. 11

MAINTENANCE AND

INSPECTION ........................... 12

Maintenance ........................ 12

Cleaning ............................... 13

TEST MODE ............................ 13

ERROR CODES ...................... 13

COIL BED SERVICING........... 14

SHAFT CLEANING .............. 14

TROUBLESHOOTING ............ 19

Quick Reference

Troubleshooting Chart ......... 20

ELECTRONIC / ELECTRICAL

REPAIR ................................... 21

Power Supply Servicing ....... 21

Main PCB, Sound Board, Fuse and Relay Servicing ............. 21

Score Sensor Replacement .. 22

Solenoid Replacement ......... 22

MARQUEE DISPLAY AND

FLORESCENT BULB /

BALLAST REPLACEMENT .... 23

Score Display Removal ........ 23

Florescent Bulb Replacement

.............................................. 23

Florescent Ballast

Replacement......................... 24

PARTS LIST ............................ 24

WARRANTY ............................ 28

WHEN CALLING FOR SERVICE

................................................. 29

www.bobsspaceracers.com

MAY 2011

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

MODEL VIEW

Back to TOC

Whac-A-Mole® SE Version 3

2

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

SPECIFICATIONS

Back to TOC

Rated power supply:

110VAC ±5%, 60 Hz.

(Note: As for the actual voltage, please refer to the label on the game).

Power consumption:

Minimum 125W (1.14 Amps)

Dimensions:

28

” W x 30” D x 57” H

Weight:

317 lbs

NOTE: Game parameters are subject to change without notice.

3

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

INTRODUCTION

Back to TOC

Overview

Thank you for purchasing the new Whac-A-Mole® SE from Bob's space Racers. Built on a long tradition of value, the new "SE" version Whac-A-Mole® retains all of the great game play of the original game yet is specifically designed for today's Arcade environment. The new game uses technology specifically developed for this application.

Features:

New Solenoid Operation

The new solenoid design uses a heavy duty steel encapsulated high temperature bobbin developed specifically for this game. The "free floating" mounting system assures long life for the integral brass sleeve as well as the Annealed Chrome mole (solenoid) shafts. This design eliminates the air compressor, pistons and associated parts of the original design. This results in a lower cost, simpler and quieter design that is specifically tailored to the Arcade environment.

Cabinet Design

The new cabinet is designed to be lighter to make it easier to handle. It also incorporates a new marquee design that is fully back lit to attract players from across the room. New exciting graphics including a cute looking updated mole design to complete the package.

Electronics

The game utilizes all solid state circuitry for the ultimate in reliability.

Programming

The game has extensive programming options available to customize the game to your location.

Self Diagnostics

The game checks itself at power up to be sure that all of the solenoids and associated sensors and switches are functioning properly. If a failure is discovered, the game will display the problem on the score LED's.

GAME PLAY

Back to TOC

The game play is the same great play that generations have been entertained by. Hit those moles when they pop out of the holes. The faster you get, the faster they get. There is a special reward for getting the high score.

The score, high score of the day and bonus ticket amounts are indicated on the scoreboard.

The game plays until time runs out.

4

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

IMPORTANT SAFETY INFORMATION

Back to TOC

WARNING: Unplug the game from the AC wall receptacle when servicing this product. Failure to do so could result in serious injury to yourself or others.

Use only a GROUNDED AC receptacle. Failure to do so could result in improper operation or damage to the game and could void your warranty. If you are unsure that your

AC receptacle is properly grounded, have a qualified electrician perform this check for you.

Always be sure power to the game is turned off when doing even routine maintenance. Otherwise moving parts could activate unexpectedly and cause injury.

This product is heavy as necessitated by the design.

When moving this game, be sure you have adequate help. Use a suitable dolly or hand truck where practical.

Use back support when needed.

POWER

SWITCH

AND

PLUG

REAR VIEW

IF YOU WISH TO SET YOUR GAME UP

DIFFERENTLY FROM THE FACTORY

SETTINGS, PLEASE REFER TO THE

PROGRAMMING SECTION OF THE

MANUAL.

SET UP

Back to TOC

1

. Be sure that the game is on a level surface. If the game is rocking on the floor use suitable shims to remove the rocking of the game.

2. Be sure to plug the game into the proper A.C. GROUNDED receptacle. Do not use long extension cords unless absolutely necessary and if so, be sure it is a heavy duty cord of at least

16 Ga. and no longer than 20 ft. Check the label on the back of the game to make sure the power requirements of the game match that of your location.

3. Turn the game on and check to be sure there are no unusual sounds and that everything appears to be working correctly. When you first turn the game on, you will notice all of the moles taking turns popping up out of their holes. This is part of the diagnostic self test.

5

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

PACKAGE CONTENTS

Back to TOC

Be sure to check that you have received all packages indicated below.

(1) Game Unit

(2) Accessories

NO NAME SPECIFICATION QTY ILLUSTRATION NOTE

1 Power cord

10A/250V, 10 feet

(Part # E0027145)

1

Wrapped up inside coin box.

2

Manual on

CD

(M0013000) English 1

In a bag in the games ticket holder.

3 Keys 2111 8

5 Keys 2112 6

Coin Box

Deltronic

Coin

Mechanism

6

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

INSTALLATION

Back to TOC

Check the parts list before installation. Verify that all parts that have been received and are in good condition.

ATTENTION

●For indoor use only!

Play zone (Operation Zone):

This machine requires space for playing the game. Be sure to leave enough space when installing the machine.

WARNING

Be sure to check the Electrical Specifications. Ensure that this product is compatible with your location’s power supply, voltage and frequency requirement.

A plate describing Electrical Specifications is attached to the product. Non- compliance with the Electrical Specifications can cause a fire and electric shock.

● Putting many loads on one electrical outlet can cause generation of heat and a fire resulting from overload.

Locations to avoid:

WARNING

The machine is designed for indoor use only. Never install this machine outdoors or in any of the following:

● Locations exposed to direct sunlight

● Locations subject to rain or water leakage.

● Unstable locations or locations subject to vibration.

● Dusty, hot, or damp locations.

7

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

GAME LEVELING

Back to TOC

Install this machine on a flat surface. Adjust levelers to lift the legs and level game.

Make sure that the machine is level with the floor. If the machine is not level, the game may not play well.

WARNING

● Disconnect game power before moving

● When moving the game, DO NOT slide the game across the floor

● Ensure the game is level before connecting the power

8

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

CONNECTING THE POWER CORD

Back to TOC

1. Insert the socket end of power cord into the power input of the game.

2. Insert the power cord plug into a service outlet.

WARNING

Do not put heavy items on power cord.

Hold the power plug instead of the wire to draw the power cord out of the socket.

Do not touch the power plug with wet hands.

Do not draw or twist the cord or near a heat source.

Do not place the cord where the player can easily trip over or come in contact with it.

● Operate this game with the correct power and fuse configuration. (The machine’s

operating supply Voltage is 110VAC, please refer to the label on the machine. Improper voltage hookup may damage the machine, and may cause an electrical shock to an operator.

9

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

INSTRUCTION FOR PLAY

Back to TOC

1. Insert coin(s), the game starts.

2. The object of the game is to hit the moles heads with the hammer as soon as the mole sticks its head out of the hole.

3. Beat the high score to receive bonus tickets.

4. Progressive speed modes have been added to increase the level of skill that it takes to achieve a higher score.

PROGRAMMING OPTIONS

Back to TOC

The game option settings are readable only by the game operator for the purpose of customizing the game to suit their location.

Steps for Programming

The Programming Console is located inside the front coin door assembly.

Program

Start / End

Option

Select

Option

Set

Programming

Console

1. Press the "PROGRAMMING" button once to enter the programming mode. The game display will show the first program option and setting as shown below.

Normal Start Up

Program Start

Button

Program Mode

1 st

Program Option and Setting

10

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

2. Press the "SELECT" button to scroll through the various options (see

Programming Chart” below).

Option Select

Button

3. Press the "STEP" button to scroll through the various settings for each option.

Programming Chart

Back to TOC

Options with Default Settings ( )

P0

– P12

Game Volume:

[P00] 1-6 (3)

Coins Per Play:

[P01] 1-4 (2)

Plays Per Credit:

Beacon Light Time:

[P11] 0-10 (8)

Beacon / Bell Settings:

[P12] (2)

PA

– PF, PR

Bonus Adder:

[P02] 0-9 (1)

Game Time (secs):

[P03] 15-60 (20)

Bonus Time:

[P04] 0-10 (0)

Minimum Tickets:

[P0A] 0-5 (1)

High Score Default:

[P0B] 250-800 (250)

Maximum Bonus

Tickets:

[P05] 0-4 (1)

Points Per Ticket:

[P06] 0-150 (20)

Attract Interval:

[P07] 0-5 (1)

Attract Sound:

[P08] 0-1 (1)

Bonus Minimum:

[P0C] 0-250 (100)

Mole Up Time Limit:

[P0D] 1-5 (3)

Attract Head Movement:

[P0E] 0-1 (1)

Progressive Speed Up:

[P0F] 0-3 (1)

Reset Defaults:

[Pr] 0-1 (0)

[P09] 0-100 (25)

Bell Time:

[P10] 0-5 (3)

11

Option Settings

Button

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

4. Press the "PROGRAMMING" button once again to EXIT the programming mode. The display will show the revision screen first, followed by the Mole heads moving up and down, before returning to normal mode as shown below. You are now ready to play the game.

Revision Code Display

Normal Mode

MAINTENANCE AND INSPECTION

Back to TOC

Maintenance

Due to the design of the machine, very little periodic maintenance is required.

Start the game and verify the correct operation before putting the game into everyday operations.

Clean the surface of the game as needed.

After about a month of game operation, check to be sure all parts are secure and in proper working order.

1. Remove power before servicing game.

To avoid a short circuit, the power must be removed before touching the inside of the game.

2. Choose the appropriate replacement parts.

Using the wrong parts could lead to malfunction or damage to the game and components.

3. Do not substitute or change equipment, without authorization.

Doing so could lead to a short circuit and machine malfunction, or fire.

4. Do not put containers of water, cups or soda cans on the machine. In addition,

chemicals or heavy items should not be allowed around the game.

The spill could cause a short circuit. Falling items could injure people or destroy the machine.

12

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

Cleaning

CLEANING - Clean the outer surfaces of the game with a commercial spray type cleaner. DO

NOT however, use glass cleaner or commercial sprays on the marquee graphic panel. Use a good quality spray type furniture polish to keep the game looking good.

Vacuum the inside of the game occasionally to help keep the dust and ticket debris off of all the optical sensors.

Clean Mole Shafts Regularly

TEST MODE

Back to TOC

Sensor and Coin Test Mode:

With the game power on, press the

“Program” button on the Programming Console. This will take you into programming mode.

While in programming mode:

Manually pull up the mole heads and if you hear the mole sounds then the sensor is working correctly.

Manually press the coin switch and if you hear a coin sound then the switch is working correctly.

After the desired changes are made to the programming options, press and hold the

“Program” button on the unit. This will restart the game in game play mode with the desired changes updated into the game play.

ERROR CODES

Back to TOC

If

E1

is displayed on the center display, there are no tickets in the ticket dispenser.

If the codes

810, 820, 830, 840,

or

850

are displayed on the center display there is a sensor failure.

13

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

COIL BED SERVICING

Back to TOC

The coil bed is the assembly that houses the solenoids, score sensors and Whac-A-Mole® heads.

This unit is built as an assembly to make servicing and repair easy. The entire unit removes from the game as a sub-assembly in just a couple of minutes.

SHAFT CLEANING

Procedure 1

A quick fix for a Shaft that is sluggish

Procedure 2

Cleaning Shafts without removing them from the game unit

This procedure should be performed every 2 weeks

Procedure 3

Removing Whac-A-Mole® Heads for cleaning

This procedure should be performed every 3 months or less if required

Procedure 1 Instructions

Back to TOC

A quick fix for a Shaft that is sluggish

Spray the Shaft with an all purpose Silicone Lubricant.

Note: Do not use graphite spray. It is conductive and you could short out the electrical wiring

and/or the Printed Circuit Board (PCB).

14

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

Procedure 2 Instructions

Back to TOC

Cleaning Mole Head Shafts without removing them from the game unit

1

. Open the front of the game unit for access

3. Remove the clip using a short flathead screwdriver.

3. Remove the washers from the shaft.

4. Lift the Mole Head out of the unit. 5. Remove the 3 washers from the top of the shaft.

5. Clean the shaft using a soft cloth.

Use an electrical contact / anti corrosion cleaner such as ElectriCorr VPCL

– 239 or equivalent.Polish the shaft with Scotch bright.Remove any rust spots with an emery

cloth.

7. Reassemble the shaft in the reverse order.

15

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

Procedure 3 Instructions

Back to TOC

Removing Mole Heads for cleaning

1. Turn off the A.C. power to the game.

2. Remove the 2 bolts that attach the playfield to the top of the main cabinet.

3. Lift the playfield up and pull forward to remove it from the unit.

4. Remove the 4 bolts and washers (7/16”) that secure the coil bed to the cabinet.

5. Remove the coil bed assembly by carefully lifting it up.

16

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

6. Disconnect the two Molex connectors that are connected to the coil bed assembly.

WARNING!

REMOVE WITH CARE. SENSORS

ARE EASILY BROKEN!!!!!

7. Remove the clip using needle nose pliers or a small screwdriver.

* Make note of the order of the washers on the

top and bottom of the shaft.

8. Remove Mole Head from the Assembly by pulling it out and then remove the 3 washers from the shaft.

9. Spray the shaft with Dry Graphite Lubricant.

Clean the shaft using a soft cloth and an electrical contact / anti corrosion cleaner such as ElectriCorr

VPCL

– 239 or equivalent.

Polish the shaft with Scotch bright

Remove any rust spots with an emery cloth.

10. Clean the bore in the assembly with a gun cleaning kit. *Gun cleaning kits can be purchased at a local

Wal-Mart store.

17

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

11. Reassemble the washers on the top part of the 12. Insert the shaft into the assembly. shaft. *Note the correct order

13. Reassembly the washers. Note the correct order

Snap the clip back in place.

Repeat these steps for each of the Mole Head shafts

14. Return the coil bed assembly to the game

Plug in the Molex plug connectors.

15. Secure the coil bed assembly to the unit using the 4 bolts and washers.

16. Return the playfield area to the unit and attach the 2 bolts.

18

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

TROUBLESHOOTING

Back to TOC

WARNING

For your safety, and to reduce risk of damage to your game read the Important Safety

Information on page 5 before attempting any troubleshooting procedure.

TROUBLESHOOTING PHILOSOPHY

When troubleshooting any product, certain general guidelines should be followed.

1. Always check to be sure that your game is turned on. Be sure that all of the fuses in the game are functional and check to see that the AC voltage is in the proper operating range for your game.

2. Check to be sure that all of the game harnessing is plugged in properly and that all of the pins are firmly seated in the connectors. It is always possible that a harness can be damaged by rough shipping or moving.

3. Check game harnessing to be sure that none of the wires have become or are damaged. Using a handheld multi-meter, check continuity of the wires to make sure they are not broken.

4. Check for obvious damage to the P.C. Boards or electrical components.

5. If you have multiple games or multiple parts on a game, change or exchange the parts and see if the problem goes away or moves to another location. This way you can quickly eliminate certain parts as being the problem with the game.

6. When changing electronic or electrical components, ALWAYS turn off and unplug the game.

7. Check to see that all power supplies are delivering the specified voltages to the P.C. Boards and components as shown in the manual.

19

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

Quick Reference Troubleshooting Chart

Back to TOC

Symptom

Sound Problems

-No sound

-Low Sound

-Intermittent Sound

Possible Problem

1) Power

Low Volume

Faulty speaker harnessing

Faulty speaker

Faulty sound board or sound board harnessing

Faulty Main P.C. Board

Solution

(ii) Power

Check Volume Control and adjust as necessary

Check connections and/or repair harnessing

Check and/or replace speaker

Check connections or Replace Sound Board

(See “Description C” below)

Check and/or repair or replace Main P.C.

Board

Game does not take or add money correctly

Coin switch out of adjustment

Coin mech dirty or improperly adjusted

Faulty Coin switch

Faulty coin switch harness or connector

Improperly programmed electronic mech

Game improperly programmed

Faulty Front Panel Board

Faulty Main P.C. Board or component

Re-bend coin switch wire

Clean and adjust mech as necessary

Check and/or replace switch

Check and/or repair harnessing

Reprogram or replace electronic mech

Check programming options and adjust

Repair and/or replace Front Panel Board

Repair and/or replace Main P.C. board

Ticket Dispenser not working properly, or no tickets being dispensed

No tickets in the game Refill ticket dispenser and press the reset button

Tickets jammed in dispenser Clear ticket jam

Ticket dispenser sensor blocked with debris Clean off sensor

Poor connection on the ticket dispenser

Game improperly programmed

Faulty ticket dispenser

Faulty ticket dispenser harnessing

Faulty Front Panel Board

Faulty main PC board

Check and/or replace connectors

Check ticket programming options

Replace dispenser

Check and/or repair harnessing

Repair and/or replace Front Panel Board

Replace or repair Main P.C. Board

(iii)

Game will not start

Game power off

Faulty or unplugged sensor pair

Main fuse blown

Ground wire broken or loose

Moles not working properly

Faulty 12 volt power supply

Faulty Front Panel Board

Faulty Main P.C. Board or component

Check on/off switch and power cord

Repair and/or replace sensor pair

(See

“Description B” below)

Check and/or replace fuse as necessary

Replace or tighten faulty ground wire

See “moles won’t pop up” below

Check and/or replace the 12VDC power supply

Repair and/or replace Front Panel Board

Repair and/or replace Main P.C. Board

Game stops or is stopped with nothing displayed

Mole heads won’t pop up

The power connector is disconnected.

The game could have a bad connection or short circuit.

Excessive dirt or debris on solenoid shaft

Reconnect the connector securely.

Check all circuitry for bad connection or short circuits.

Solenoid shaft alignment

Faulty sensor pair

The current is too low.

Faulty 36 volt power supply

Remove shaft and clean shaft and solenoid

(See “Description A” below)

Check that the bearing is evenly tightened

Check and/or replace sensors

Check and/or replace the 36VDC power supply

Check and/or replace the 36VDC power supply

20

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

Faulty solenoid coil Check coil resistance and replace solenoid coil

Faulty main P.C. board or component Repair or replace main P.C. board

Mole head will not score

Disconnected sensor

Faulty Connector or Connections

Dirty Sensor

Faulty Sensor.

Check connections.

Check and/or replace Sensor

Clean Sensor,

(See “Description B” below)

Check and/or replace Sensor,

“Description B” below)

(See

Noisy mole heads when they move up and down

The shaft has loosened and needs tighten.

The mole shaft could be bent.

Tighten parts.

(See “Description A” below)

Check and/or replace mole shaft.

(See “Description A” below)

Light bulbs are out

Lamps are burnt out

Possible faulty socket connection

Faulty ticket dispenser harnessing

Faulty main PC board

Replace the lamps.

Check connections and connectors

Check and/or repair harnessing

Replace or repair main PC board

ELECTRONIC / ELECTRICAL REPAIR

Back to TOC

WARNING: Unplug the game from the AC wall receptacle when servicing this product. Failure to do so could result in serious injury to yourself or others.

Power Supply Servicing

1. Turn off A.C. power to the game and unplug the game from the A.C. receptacle.

2. Remove coil bed as indicated above in the "coil bed removal and installation" section.

3. Remove whichever power supply is faulty and replace.

4. Assemble in reverse order.

Main PCB, Sound Board, Fuse and Relay Servicing

1. Turn off A.C. power to the game and unplug the game from the A.C. receptacle.

2. Remove the (2) bolts that attach the playfield to the top of the main cabinet.

3. Lift out and remove the playfield support frame from on top of the coil bed.

4. Replace the damaged board or bad fuse.

5. Assemble in reverse order.

NOTE: IF THE SOLENOID IS INSTALLED UPSIDE A LARGE LOSS OF SOLENOID STRENGTH WILL BE NOTED.

INSTALLING THE SOLENOID UPSIDE DOWN MAY ALSO RESULT IN SOLENOID WIRE DAMAGE.

21

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

6. Re-install the solenoid plunger bearing making sure that the anti-rotation roll pin engages the notch in the top of the solenoid.

7. Re-install the bearing retaining bolts.

NOTE: INSTALL THE BOLTS EVENLY AND DO NOT OVERTIGHTEN. IF THE BOLTS ARE TIGHTENED

UNEVENLY, SOLENOID PLUNGER SHAFT BINDING MAY OCCUR.

8. Re-assemble the rest of the game in reverse order. Refer to the specific sections of the manual if necessary.

9. Plug the game in and test for smooth solenoid operation.

Score Sensor Replacement

1. Remove coil bed as indicated above in the "coil bed removal and installation" section.

2. Unplug and unscrew the defective sensor pair and replace.

3. Assemble in the reverse order.

SCORE

SENSORS

Solenoid Replacement

1. Remove coil bed as indicated above in the "coil bed removal and installation" section.

COIL BED

(FRONT VIEW)

2. Remove the associated Mole head as indicated in the "mole head removal" section.

3. Remove the (2) 1/4-20 hex head bolts that hold the solenoid plunger bearing into the top of the coil bed assembly.

4. Unplug the bad solenoid and remove from the coil bed assembly.

5. Install the new solenoid making sure that the wires come out of the TOP of the solenoid and feed back down into the coil bed. There is a clearance notch in the top of the coil bed assembly for the solenoid wires.

COIL BED

(SECTION VIEW)

22

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

MARQUEE DISPLAY AND FLORESCENT

BULB / BALLAST REPLACEMENT

Back to TOC

1. Turn off A.C. power to the game and unplug the game from the A.C. receptacle.

2. Remove the (8) screws that hold the marquee cover graphics to the marquee.

3. Remove the graphics panel.

MARQUEE

GRAPHICS

PANEL

SCREWS

SCORE

DISPLAY

Score Display Removal

1. Remove the (4) hex nuts from the back of the score display.

2. Remove the score display from the marquee.

3. Remove the ribbon cable from the bad display.

4. Remove the (12) screws and the plastic back from the back of the score display.

3. Remove the (4) hex standoffs that hold the board to the mounting bracket.

SCREWS

STANDOFFS

DISPLAY

RIBBON CABLE

PLUG

4. Assemble in reverse order.

NOTE: BE CAREFUL TO PLUG THE RIBBON CABLE IN PROPERLY TO ASSURE

PROPER FUNCTION AND TO AVOID DAMAGE TO THE BOARD.

Florescent Bulb Replacement

1. Remove the retaining clip that secures the bulb to the standoff.

2. Press the RED lock button of the fixture to release the bulb.

BULB

RED LOCK

BUTTON

RETAINING

CLIP

SCORE DISPLAY

(SIDE VIEW)

3. Replace the bulb in reverse order.

NOTE: BE SURE THAT THE NEW BULB IS PROPERLY SNAPPED INTO THE HOUSING

TO AVOID IT COMING OUT FROM THE VIBRATION OF NORMAL GAME PLAY. ALSO,

BE SURE THAT THE RETAINING CLIP IS SECURELY SNAPPED TO THE STANDOFF.

23

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

Florescent Ballast Replacement

FRONT VIEW

(MARQUEE NOT SHOWN)

1. Remove the florescent bulb and the retaining clip.

2. Unscrew the bulb socket from the rear of the cabinet by removing the

(2) screws.

3. Unplug the ballast and remove the (2) screws that hold it to the rear of the cabinet.

4. Carefully remove the wires from the bulb socket.

5. Assemble in reverse order.

BULB

SOCKET

BALLAST

RETAINING

CLIP

PARTS LIST

Back to TOC

Part Number Description Photo

A0800005 Decal Set

TBD Decal, Top

TBD Decal, Speaker Area

TBD Decal, Front Bottom

TBD Decal, Play Area

24

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

TBD Decal, Left Side

TBD Decal, Right Side

CX800207 Panel Playfield

CX800235 Playfield Support Box Assembly

E0023750 5 amp, 250 volt fuse

E0800913

E0025100

Electrical Wire Box

12VDC Mech Counter

E0800005 Solenoid, 175 Stator

E0800040 Ballast 120v Fluorescent

E0800041

E0800042

E0800070

Fluorescent Compact Bulb

Fluorescent Socket Bulb

Speaker 6" x 9" Oval

25

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

E0800154 Sensor Tube Receiver

E0800165 Sensor Tube Transmitter

EX033609 3 Digit

– 7 Segment Display

W0800002 Shaft Whac-A-Mole Head Plunger

W0800004 Shaft Elect Whac-A-Mole Plunger

E0800450

5VDC/12VDC/110VAC/

200 W PSU

E0022860 27 VDC 11.7 Amp PSU

W0800207 Bracket Score Sensor Mtg

TBD

TBD

E0007276

TBD

Washer/Spacers

For Mole Plungers

Main Logic Board

Station IO Board

System Programming Module

26

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

TBD

All Unit Wiring Harnesses with Plugs

TBD

Mole Box Assembly

(Does not include Mole Plungers, coils or cables)

27

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

WARRANTY

Back to TOC

BOB’S SPACE RACERS INC.

90 DAY COIN-OPERATED GAME WARRANTY

1.

INCLUDED IN THIS WARANTY Bob’s Space Racers

®

, Inc. warrants to the original purchaser only that the equipment that is the subject of this sale conforms to its specifications, and is free from defects under normal service for a 90 day period from the original date of deliver. This warranty does not include any damages resulting from occurrences listed in paragraph 2 below. This warranty is not transferable under any circumstance.

Any claims under this warranty must be received in writing by Bob’s Space Racers ®

, Inc. within

120 days from date of delivery. Within a reasonable time of such written notification Bob’s Space Racers

®

, Inc. will replace or repair any defective component of the equipment or part thereof which fails for reasons other than normal service, use, or wear. Bob’s Space

Racers

®

, Inc. reserves the right to request dated proof of purchase by the end user (original purchaser) at any time. Light bulbs are specifica lly excluded from this warranty and shall be the sole responsibility of the purchaser. Bob’s Space Racers ®

, Inc., within its sole discretion, makes the final determination as to whether to repair or replace any component and whether any such repair or replacement shall be performed where the equipment is located or at it’s home facility in Volusia County, Florida, or another facility of its sole choice.

Any and all freight charges for the purposes of repair or replacement shall be paid by the original purchaser. All defective parts shall be returned to Bob’s Space Racers

®

, Inc. if requested. Bob’s Space Racers

®

, Inc. does not warrant that the equipment will meet any original purchaser’s specific requirements or that the operation of the equipment will be uninterrupted. These remedies are the original purchaser’s exclusive remedies for breach of warranty.

2.

EXCLUDED BY THIS WARRANTY Bob’s Space Racers

®

, Inc. does not warrant (a) any product, components or parts not manufactured by Bob’s Space Racers

®

, Inc.; (b) damages caused by use of the equipment for purposes other than those for which it was designed; (c) defects caused by failure to provide a suitable installation environment for the equipment; (d) damage caused by unauthorized attachments, modification, or service; (e) damage caused by normal wear and tear or improper power supply; (f) damage caused by accident or disaster such as fires, flood, lightning, and wind; or (g) any other abuse or misuse of the equipment.

3. EXCLUSIVE WARRANTY. THE FORGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR

REMEDIES, WHETHER WRITTEN, ORAL OR IMPLIED. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE

DESCRIPTION ON THE FACE HEREOF. ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE, COURSE OF DEALING OR USAGE OF TRADE ARE HEREBY EXPRESSLY DISCLAIMED AND

EXCLUDED.

4. REMEDIES LIMITED. UNDER NO CIRCUMSTANCES, EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, SHALL

BOB’S SPACE RACERS ®

, INC. BE LIABLE FOR ANY LOSS OR DAMAGE, DIRECT OR INDIRECT, SPECIAL INCIDENTAL OR

CONSEQUENTIAL ARISING OUT OF THE USE OR INABILITY TO USE THIS EQUIPMENT INCLUDING BUT NOT LIMITED TO ANY

CLAIM FOR LOSS OR PROFITS, LOSS OF SAVINGS OR REVENUE, LOSS OF USE OF THE EQUIPMENT, OR ANY ASSOCIATED

EQUIPMENT, FACILITIES OR SERVICE, DOWNTIME, THE CLAIMS OR COSTS OF THIRD PARTIES INCLUDING CUSTOMERS

AND INJURY TO PROPERTY. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

5. NO OTHER WARRANTIES. Unless modified in writing and signed by both parties, this agreement is understood to be the complete and exclusive agreement between the parties, superseding all prior agreements, oral or written, and all other communications between the parties relating to the subject matter of this agreement. No em ployee or representative of Bob’s Space Racers ®

, Inc. or any other party is authorized to make any other warranty or to assume any other liability in connection with the sale of its equipment.

6. TIME LIMIT FOR CLAIMS. Any claim for breach of warranty or cl aims under this warranty must be received in writing by Bob’s Space

Racers

®

, Inc. within 120 days following delivery of the equipment.

7.

FUTURE CHANGES. Bob’s Space Racers ®

, Inc. reserves the right to reserve, change or modify the construction and design of its equipment or any component part or parts thereof without incurring the obligations to make such changes or modifications in present equipment.

8.

ALLOCATION OF RISKS. This agreement allocates the risks of equipment failure between Bob’s Space Racers ®

, Inc. and the original purchaser. This allocation is recognized by both parties and is reflected in the price of the goods. THE PURCHASER

ACKNOWLEDGES THAT HE HAS READ THIS AGREEMENT, UNDERSTANDS IT, AND IS BOUND BY ITS TERMS.

9. TO OBTAIN WARRANTY SERVICE. The original purchaser must, at his/her own expense, bring or ship the equipment to an authorized location for service. Additionally, the original purchaser must pay all freight, shipping or transportation charges for the return of the equipment from Bo b’s Space Racers

®

, Inc. to the original purchaser. Telephone or write:

Bob’s Space Racers

®

, Inc.

427 15 th

Street

Daytona Beach, FL 32117

Telephone number: 386/677-0761

FAX: 386/677-0794

28

DOWN

UP

BOB’S SPACE RACERS

®

WHAC-A-MOLE® SE ARCADE MANUAL BSR V3.0

WHEN CALLING FOR SERVICE

Back to TOC

1. When calling for service, please check the service manual first. Many times the answer to your problem has been addressed in this documentation.

2. Please make sure you have the serial number of the game ready when you call.

3. If this is a repeat call, please tell the service technician that you have made a previous call regarding this problem.

This way we will be able to retrieve the history on your game allowing us to serve you better and save you time.

4. Please retain proof of purchase for your product. This might be requested for warranty repairs.

5. Please call from the game if possible since we might need you to check certain things on the game while we are on the telephone with you.

IF YOU HAVE ANY QUESTIONS OR COMMENTS, PLEASE CALL OUR SERVICE

DEPARTMENT AT

(386) 677-0761

(MONDAY

– FRIDAY, 8:30AM – 5:00PM EST, EXCLUDING HOLIDAYS)

(or)

EMAIL QUESTIONS TO:

[email protected]

(or)

VISIT THE “CUSTOMER SUPPORT” SECTION ON OUR WEBSITE:

WWW.BOBSSPACERACERS.COM

29

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals