ITW Dynatec DYNAMELT M DM M35 DCL adhesive supply unit OPERATIONS & SERVICE MANUAL

The DYNAMELT M DM M35 DCL is a computer-controlled hot-melt supply unit designed on metric standards for accurate, proportionate temperature control for the hopper, hoses and applicators. The Dynamelt M Series ASUs are available in three cabinet sizes and offer four hopper sizes, and are designed to closely control the temperature of hot-melt adhesive for up to 4 hoses and 4 heads. Temperature setpoints are operator-selected for up to 16 zones and the system automatically provides warnings and alarms for operator errors and system malfunctions.

PDF Download
Document
ITW Dynatec DYNAMELT M DM M35 DCL Operations & Service Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Computer-controlled
  • Metric standards
  • Up to 4 hoses and 4 heads
  • Temperature setpoints for up to 16 zones
  • Warnings and alarms for operator errors and system malfunctions
  • Automatic startup and shutdown
  • Seven-day scheduler

Frequently asked questions

The DYNAMELT M DM M35 DCL is a computer-controlled hot-melt supply unit designed to control the temperature of hot-melt adhesive for up to 4 hoses and 4 heads.

The DYNAMELT M DM M35 DCL allows the user to program temperature setpoints for up to 16 zones.

The Dynamelt M Series ASUs are available in three cabinet sizes and offer four hopper sizes.

The DYNAMELT M DM M35 DCL can accomodate air-actuated automatic applicators (heads), electric applicators, hand-held applicators and/or special applicators.

Options available include pressure gauge, drop-in grid, pendant control, adhesive level control, digital pressure readout and electric clutch.
Preparing document for printing…
0%