advertisement
Installation Instruction
V1.0
PSFS01
Thank you for choosing our product! We strive to provide the best quality and services for our customers. Would you kindly share your experience on Amazon if you are satisfied? Should you have any issues, please don't hesitate to contact us.
Telephone：800-5566-806 Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email： [email protected] (US/CA/DE/UK/FR/IT/ES/JP/AU)
IMPORTANT SAFETY INFORMATION
WARNING! SEVERE PERSONAL INJURY AND PROPERTY DAMAGE
CAN RESULT FROM IMPROPER INSTALLATION OR ASSEMBLY.
READ FOLLOWING WARNINGS BEFORE BEGINNING.
• If you do not understand the instructions or have any concerns or questions, please contact customer service at [email protected]
• Do not install or assemble if the product or hardware is damaged or missing.
• Not all parts and hardware included will be used. lf you require replacement parts, contact customer service at [email protected]
• This product may contain moving parts. Use with caution.
•Please check www.perlesmith.com for more products and company information.
Supplied Parts List
1
TV Plate
(x1)
M8x35 Bolt
A (x 3 )
Rubber Pad
F (x6)
Support Pillar
2 (x1)
M6x60 Bolt
B (x 4 )
Safety Lock
G (x 2 )
Tempered Glass
3 (x1)
Monitor Bracket
4 (x 2 )
Plastic Socket
5 (x1)
M8X22X2
C (x 3 )
Metal Pad
E (x 2 )
Allen Key
H (x1)
M8X22X2
D (x 3 )
I
Allen Key
(x1) J
Wire Clip
(x 4 )
M6x16 Bolt
TV 1 (x 4 )
M6x30 Bolt
TV2 (x 4 )
M6x50 Bolt
TV3 (x 4 )
M8x16 Bolt
TV4 (x 4 )
M8 x 45 Bolt
TV5 (x 4 )
M8 x 65 Bolt
TV 6 (x 4 ) TV7
SP1
(x8) TV 8
SP2
(x8)
Spacer with 3 holes
TV9 (x 4 )
1
Steel Washer
Plastic Washer
S t ep 1
1.1
C onnec ting the Suppo rt P illar to Tempered Glass
3 Tempered Glass
(Painting Side)
F Rubber Pad
1.2
2 Support Pillar
Plastic Socket 5
D
C
A
H
Allen Key
S tep 2
1
C onnecting the TV P late t o Suppo rt P illar
1 TV Plate
I Allen Key
B M6x60 Bolt
E Metal Pad two choices for height adjustment for the wall plate
2
2
J Wir e Clip
S tep 3 Measure VESA and Check TV screws
Measure the distance between the holes located at the back of your TV (these measures may form the shape of a square, or a rectan-gle) and check that these taken measures are within the
VESA(*) range for this wall mount.(*) VESA: International standard established by the TV manufacturers used to determine if LCD/LED TVs are compatible with wall mounts.
When attaching brackets to the flat screen, be careful not to over tighten screws and be sure that screws do not bottom out in the mounting holes.
Check TV screws
Hand thread screws into the threaded inserts on the back of your TV to determine which screw diameter (M6, or M8) to use.
Too Short
Too Long
Correct Correct
3
Step 4 Mounting the Monitor Bracket to a TV
FLAT BACK TV
(UNIVERSAL MONITOR PLATE)
ROUND BACK TV
(UNIVERSAL MONITOR PLATE) screwdriver(Not included)
TV1,4
TV9
4
4
TV2,3,5,6
TV9
TV7,8
First, make sure the diameter of the bolt(TV1-6) fits your TV. Then, please see the diagram above. You will need to thread the bolt into the TV using the correct washer (TV9) and spacer (TV7 or TV8) if necessary with a screwdriver(Not included). Please make sure the monitor brackets(4) are vertically centered and level with each other.
S t ep 5 Attaching TV to TV Plate and Managing the Wires
G Safety Lock
J Wir e Clip
4
Swivel Adustment
Step 6 Adusting the Height of the TV
Height adjustable vertical bracket(4) first choice third choice second choice
If you find your TV set is too close to the base, please take off the TV from the stand.
Then, change to the second choice or third choice to allow more space between TV and the tempered glass base (3).
First choice Second choice
5
Third choice
advertisement
Related manuals
advertisement