LEAKO AKW-WD Water Leakage Sensor User Guide

LEAKO AKW-WD is a water damage prevention system that utilizes sensors to detect water leaks and alert you via the web platform. The sensors can be easily programmed with the controller and placed near water sources such as sinks, dishwashers, and washing machines. If a leak is detected, the system will notify you immediately so that you can take action to prevent water damage. It's a reliable solution for protecting your home from costly water damage.

PDF

Document

USER GUIDE

1. Insert battery into the AKWAtek sensors

Unscrew the sensor (small phillips)

Insert AAA battery as in the picture

2. Programming the sensor with the controller

The technian will pair the sensor with the controller

The technician will assign the acurate information about the sensor assignment to the web platform

3. Sensor failure

When a sensor failure occurs, try the following:

Check the location of the sensor

Check if there any physical damage to the sensor

Move the sensor closer to the controller

Replace the battery of the sensor if the controller does not respond when the sensor is activated within short range

Health Canada RF Exposure Warning Statement:

This device complies with Health Canada’s Safety Code. The installer of this device should ensure that RF radiation is not emitted in excess of the Health Canada’s requirement. Information can be obtained at: http://www.hc-sc.gc.ca/ewh-semt/pubs/radiation/radio_guide-lignes_direct/index-eng.php”

FCC statements:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

IC Statements:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Three years warranty

This product is guaranteed to be free of defects in materials and workmanship for 3 years from the date of purchase. If this product is defective, call 1.833.995.6400 for repair or replacement. Guarantee does not include normal wear and tear or batteries.

If you have any questions, problems or missing parts, please call LEAKO customer support at 1.833.995.6400 or e-mail us at : [email protected] www.leako.ca

Hello! I am an AI chatbot specifically trained to assist you with the LEAKO AKW-WD User Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!