Daewoo FLR00043 Cyclone Digi One 29.6V Cordless Vacuum Cleaner User Manual
Daewoo FLR00043 is a cordless vacuum cleaner designed for versatile cleaning of various surfaces. Featuring a motorized floor tool with interchangeable Carpet and Hard Floor brushes, it adapts to different flooring types. Its crevice and upholstery tool tackles hard-to-reach areas, while the long reach crevice tool is ideal for cleaning narrow spaces. The intelligent AUTO mode adjusts suction power based on conditions, and the information screen displays speed, suction level, and error notifications.
advertisement
Assistant Bot
Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
1
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be followed. These instructions should be saved for future reference:
•
•
Read and familiarise yourself with all operating instructions before using this Vacuum Cleaner.
Before plugging your unit into the mains, visually check that the unit is intact and has not suffered any transit damage.
•
•
Check that the voltage indicated on the data plate corresponds with that of the local network before connecting the appliance to the mains power supply.
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
•
•
•
•
•
•
•
•
•
•
•
•
•
Children shall not play with the appliance.
Keep the appliance and its cord out of reach of children less than 8 years when it is energised or cooling down.
Do not immerse the appliance or its cord in water or any other liquids.
Do not leave the appliance unattended during use.
Do not leave the appliance unattended whilst connected to the mains supply.
Do not use this appliance outdoors.
It is imperative to unplug the power cord after the appliance has been used, before it is cleaned and whilst being repaired.
Repairs to electrical appliances should only be performed by a qualified electrician. Improper repairs may place user at serious risk.
Do not operate this appliance with a damaged plug or cord, after a malfunction or after being dropped or damaged in any way.
Regular, periodic checks should be carried out on the mains cable to ensure no damage is evident. Should there be any signs of damage the appliance should not be used.
If the power cable is damaged, it should only be replaced by the manufacturer or a suitable qualified after-sales-service in order to avoid a hazard
Do not allow the mains cable to hang over sharp edges or come in contact with hot surfaces.
•
•
Allow the unit to cool before storage.
Before cleaning, disconnect the appliance from the mains supply and
2
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
•
•
•
•
•
•
User Manual allow to cool.
This appliance is intended for household use only and should not be used for industrial purposes.
Do not use any accessories or attachments with this appliance other than those supplied or recommended by supplier.
Do not use this appliance for anything other than its intended use.
Do not push objects into any openings as damage to the appliance and/or electric shock may occur.
Unplug after each use. Grasp the plug, not the cord.
Do not pull or carry the Vacuum Cleaner by the electrical cord, use the
•
•
•
•
•
•
•
•
•
• handle provided.
Ensure fingers and other objects are never placed in any part of the vacuum cleaner. Clothing or hair may become trapped if the vacuum is used improperly.
Keep hair, loose clothing, jewellery, fingers and all parts of the body away from openings and moving parts.
Keep all air vents clear and free of dust, lint, hair and anything else that may reduce airflow.
Avoid directing the appliance towards naked flames as the air discharged may extinguish gas fires or pilot lights and may disturb ashes in open fires.
Do not Vacuum water or any other liquids with this vacuum.
Do not Vacuum hot ashes or lit cigarettes, etc.
Never use the appliance without the filter in place.
Do not use the Vacuum without the Dust Compartment attached.
Do not vacuum any large or broken objects such as glass.
Do not vacuum anything that is burning or smoking such as cigarettes, matches or hot ashes.
Waste batteries should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
3
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Description of Parts
1 2
15
14
13
16
12
3 4 5
11
Description of Parts – Accessories
17
6
10
7
8
9
18
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
1.
Dust Release Catch
2.
Hepa & Cyclonic Filters
3.
Dust Compartment
4.
Dust Compartment Catch
5.
Air Outlet
6.
Motor Housing
7.
Display Panel
8.
On/Off Trigger Switch
9.
Handle
10.
Battery Compartment
11.
Charging Socket
12.
Battery Compartment Catch
13.
Air Intake
14.
Attachment Release Catch
15.
Dust Compartment Cover
16.
Motorise Floor Tool
17.
Crevice & Upholstery Tool
18.
Small Power Plug
19.
Mains Charger
20.
Wall Mount Bracket
21.
Aluminium Flexi-Tube
22.
Carpet Brush
23.
Hard Floor Roller
24.
Long Reach Crevice Tool
19
20
21
22
30
31
32
33
34
25
26
27
28
29
23
24
22.
Carpet Brush
23.Hard Floor Brush
24.Long Reach Crevice Tool
25.Information Screen
26.Battery Charge Display
27.Dust Sensor Failure
28.High Speed
29.Intelligent AUTO Mode
30.Battery Indicator
31.Brush Blockage Indicator
32.Air Intake Blockage Indicator
33.Eco Speed
34.Speed/Suction Indicator
4
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
35 36
37
38
35.
36.
37.
38.
Pet Brush Tool
Floor Polisher Tool
Polishing Pads (x2)
Motorised Stair Tool
Before the first time you use your Cordless Vacuum Cleaner
Please read these operating instructions thoroughly and keep them in a safe place for future reference.
Remove all packing materials and discard responsibly.
Charging the internal Battery
Before use, please ensure that the internal rechargeable battery is fully charged as follows :
1.
Insert the Small Power Plug (18) of the Mains Charger (19) into the Charging Socket (11).
2.
Plug the Mains Charger (19) into the nearest mains socket.
3.
The Battery Indicator (30) will flash green and the Battery Charge Display (26) will count up to 100% as the internal battery charges.
4.
Once the battery is fully charged (after approximately 5 hours), the Battery Charge Display
(26) will display 100 (arrowed below) showing that the internal battery is 100% fully charged and the Mains Charger (19) can now be removed.
NB Left: The internal battery will need recharging when the Battery
Indicator (30) flashes red and the
Battery Charge Display (26) reads a low value (less than 10%). Follow the above procedure (1 – 4) to recharge the internal battery.
5
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
Attaching the Accessories
CAUTION Ensure that the vacuum cleaner is not connected to the mains charger before use.
The Floor Attachment
1.
Push the Aluminium Flexi Tube (21) onto the Air Intake (13) until it clicks home as shown below:
2.
Push the Motorised Floor Tool (16) onto the other end of the Aluminium Flexi Tube (21) again until it clicks home.
Selecting the Correct Brush for the Motorised Floor Tool (16)
1.
Before using the Motorised Floor Tool
(16), first choose the appropriate brush type for the floor type being cleaned:
Select the Carpet Brush (22) for vacuum cleaning carpets, rugs, etc.
Select the Hard Floor Brush (23) for cleaning vinyl, laminate, tiled floors, etc.
1
2 b. c.
2.
To change the brush attachment, slide the catch (a) to the left and lift up the brush bearing retaining clip (b) on the underside of the Motorised
Floor Tool (16) as shown left.
NB the Carpet Brush (22) is currently fitted in this example.
Lift out the Carpet Brush (22) and the brush bearing (c). Remove the brush bearing from the Carpet Brush (22). a.
6
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
2
33
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
3 c. c. c.
3.
Place the brush bearing (c.) onto the end of the Hard Floor Brush (23) as shown above left.
Once in place, insert the Hard Floor Brush (23) into the Motorised Floor Tool (16) as shown above right. d.
4 e.
4.
Finally, hook the brush bearing retaining clip at the front edge (d) and push down into until it clicks into place (e) as shown left.
The vacuum is now ready to clean hard floors.
Using Your Cyclone Digi-Flex Vacuum Cleaner
1.
Right: Grasp the vacuum cleaner firmly by the Handle (9) and press the On/off Trigger
Switch (8) to power up the cleaner.
1
28
2. Left: During use, refer to the Information
Screen (25), press the Eco Speed (33) to lower the vacuum speed/suction or High
Speed (28) to increase speed/suction. The
Speed/Suction Indicator (34) will move to show the current speed/suction level (low to high) selected.
Alternatively press the ‘AUTO’ mode so that the vacuum will automatically vary the speed/suction power for the conditions.
7
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
3
3. Right: Place your foot gently on the
Motorised Floor Tool (16) and pull the cleaner back by the Handle (9) and start vacuum cleaning.
Press the On/off Trigger Switch (8) again at the end of cleaning to switch the cleaner off.
Far Right : Press the catch on the Flexi joint
(arrowed right) to release the Aluminium
Flexi Tube (21) so that the tube can ‘flex’ in order to clean under furniture and other close to the ground objects.
4
4. Left: If the Aluminium Flexi Tube (21) is not required, the Motorised Floor Tool (16) can be attached directly to the vacuum as shown left for cleaning hard to get at areas such as stairs, car seats, etc.
Using the Crevice & Upholstery Tool (17)
1.
Attach the Crevice Tool & Upholstery Tool (17) onto the Aluminium Flexi Tube (21) to clean carpet edges and hard to get at areas:
Left : Slide the brush back on the tool to reveal the crevice tool to clean carpet edges, etc. Alternatively use the
Long Reach Crevice Tool
(24).
Right : Pull the brush down on the tool to clean curtains, upholstery, etc.
8
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
2.
If the Aluminium Flexi Tube (21) is not required, attach the Crevice Tool & Upholstery
Tool (17) directly to the cleaner, this useful for cleaning soft furnishings, car seats, stairs, etc.:
Above: Using the Crevice Tool &
Upholstery Tool (17) on Upholstery.
Above: Using the
Upholstery Tool
Crevice Tool &
(17) to clean the car.
Using the Floor Polishing Tool (36)
1.
Before using the Floor Polishing Tool (36), turn the unit upside down and attach the two
Polishing Pads (37) by pressing them onto the rotating plates as shown below:
1
1.
Left: Attach the Polishing Pads (37) by pushing the pads against the Velcro pads on the underside of the polisher.
2.
Right: Apply polish (not supplied) to the floor surface.
WARNING do not use the polishing tool without polish otherwise damage may occur to the appliance and/or the floor surface.
2
9
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
3
3. Left: Place your foot gently on the Floor Polishing
Tool (36) and pull the cleaner back by the Handle
(9).
Press the On/off Trigger Switch (8) to start the polishing action, move the polisher gently along the floor as shown left.
Press the switch again at the end of polishing to switch the cleaner off.
Using the Pet Brush Tool (35)
1.
Connect the Pet Brush Tool (35) to the cleaner as shown below:
1
2
2. Squeeze the trigger on the Pet Brush Tool (35) to reveal the brush teeth and brush the pets coat as shown below:
Trigger button
10
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
3. Once the brush is full of hair: a.
Press the On/off Trigger Switch (8) to power up the cleaner. b.
Release the trigger button (arrowed right) on the
Pet Brush Tool (35) and the hair will then be removed by the vacuum:
Repeat the above process to continue grooming your pet.
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
3 a. b.
Using the Motorised Stair Tool (38)
Attach the Motorised Stair Tool (38) to the cleaner, this useful for cleaning the stairs as below:
11
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
Emptying and Cleaning Your Cyclone Digi-Flex Vacuum Cleaner
WARNING Always disconnect the cleaner from the mains charger before cleaning.
1
1.
Once the dust level reaches the ‘MAX’ mark (arrowed left) on the Dust
Compartment (3) it will need emptying and the filters cleaned.
WARNING do not continue to use your vacuum cleaner once the ‘MAX’ mark has been reached as permanent damage may occur to the appliance.
2
2.
Right: To empty the cleaner, hold the Dust
Compartment (3) over a dust bin as shown right and press the Dust Release Catch (1) (arrowed right) and the Dust Compartment Cover (15) of the dust compartment will swing open and allow the collected dust to fall out into the dust bin.
3
2.
Hold the Dust Compartment (3) and press the Dust Compartment Catch
(4) arrowed left and lift up the dust compartment and remove.
12
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
4.
Remove the Hepa & Cyclonic Filters (2) from the Dust Compartment (3) as shown right:
5
4
5.
Above: Wash the Hepa & Cyclonic Filters (2) in warm running water until clean. Allow the filters to dry thoroughly for 24 hours before reuse.
Replacing the Filters in Your Cordless Vacuum Cleaner
6
6.
Left: First replace the Hepa Filter inside the
Cyclonic Filter, rotate the Hepa filter clockwise to lock it onto the Cyclonic Filter as shown.
13
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
7
7.
Right: Replace the Hepa & Cyclonic Filters (2) into the Dust Compartment (3) as shown.
8
8.
Left: Replace the Dust Compartment
(3) onto the vacuum by hooking the dust compartment on (arrowed left) and pushing it down until it clicks home as shown.
Care and Use of your Cordless Vacuum Cleaner
•
Always disconnect the cleaner from the mains charger before cleaning.
•
Clean outside of the cleaner with a clean damp cloth. Never clean with harsh or abrasive cleaners.
•
Do not submerge the cleaner or its charger in water or any other liquids.
•
Empty the Dust Compartment (3) as soon as the ‘MAX’ mark has been reached.*
•
Wash the Hepa & Cyclonic Filters (2) regularly – see table below.
•
Allow the filters to thoroughly dry out for 24 hours before reassembly and use.
*WARNING do not continue to use your vacuum cleaner once the ‘MAX’ mark has been reached as permanent damage may occur to the appliance.
14
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
Recommended filter cleaning intervals
Filter Type
Hepa Filter
Cyclonic Filter
Recommended cleaning period
•
Shake out debris when you empty the dust container
•
Rinse under warm water once a month
•
Allow to dry thoroughly for 24 hours before reuse.
•
Shake out debris once a month
• Rinse under warm water once a month.
•
Allow to dry thoroughly for 24 hours before reuse.
WARNING Ensure the filters are cleaned periodically according to the table above, failure to clean the filters regularly will severely impair the performance and permanent damage may occur to the appliance and may invalidate your warranty.
Technical Specification
Model Number
Mains Charger
Rated Power
Battery
Unpacked Weight (approx.)
Dimensions (approx.)
Vacuum (max)
Noise Level (approx.)
Dust Compartment Capacity
FLR00043
Input: AC 100-240V ~ 50/60Hz Output: 36V DC 500mA
250W
29.6V 2500mAh Li-Ion (8 cells)
2.2 Kgs
328mm (l) x 110mm (w) x 220mm (h)
≥ 24kpa
72dB
0.8L
15
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
Troubleshooting Guide
Problem
Unit fails to turn on.
Possible Cause
Internal battery not charged.
The charger is not plugged into the mains socket.
User Manual
Solution
Charge the internal battery.
Ensure the charger is fully inserted into the socket and the socket is switched on.
Low suction or poor pick-up. Dust Compartment is full.
The vacuum is making a
“hissing” sound.
Filters are clogged.
Low Power Selected
Empty the cylinder.
Check and clean the filters.
Press the Min/Max Power
Button (8)
The airflow is restricted Empty the Dust Compartment.
Check and clean the filters.
Clear any blockages if necessary.
The Carpet Brush (22) or
Hard Floor Roller (23) is obstructed and/or tangled with hair and debris
Switch off the vacuum cleaner and remove obstruction from the Carpet Brush (22) or Hard
Floor Roller (23). Brush Blockage Indicator
(31) not lit
Air Intake Blockage Indicator
(32) not lit
Dust Sensor Failure (27)
Indicator not lit
The Aluminium Flexi-Tube
(21) and/or vacuum Air
Inlet (5) are blocked.
The vacuum is very dirty and/or blocked and the
Dust Compartment full.
Switch off the vacuum cleaner and remove obstruction from the Aluminium Flexi-Tube (21) and/or vacuum Air Inlet (5)
Switch off the vacuum cleaner and empty and clean the Dust
Compartment (3), Filters (2),
Aluminium Flexi-Tube (21) and/or vacuum Air Inlet (5)
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
16
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Cyclone Digi One 29.6V Cordless Vacuum
FLR00043
User Manual
IMPORTANT – RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
17
advertisement
Key Features
- 29.6V motor provides up to 40 minutes of powerful suction
- Intelligent AUTO mode automatically adjusts suction power to suit the surface being cleaned
- Digital display panel provides real-time information on battery charge, suction power, and maintenance alerts
- Lightweight and ergonomic design for easy maneuverability
- Includes a variety of accessories for cleaning upholstery, stairs, and hard-to-reach areas