Honeywell Portable Air Conditioner User Manual

Honeywell Portable Air Conditioner User Manual

Honeywell PORTABLE AIR CONDITIONER is a versatile climate control solution for your home, featuring air conditioning, dehumidifying, and fan functions. It offers customizable cooling and dehumidifying options, with adjustable fan speeds and temperature settings, allowing you to tailor the environment to your comfort level. The portable design with casters makes it easy to move from room to room, providing targeted cooling or dehumidification wherever you need it.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Manual
Honeywell Portable Air Conditioner User Manual | Manualzz

Portable Air Conditioner

User Manual

Read and save these instructions before use

Customer Support:

Web: www.jmatek.com

USA: 1-800-474-2147 | [email protected]

CANADA^: 1-888-209-0999 | [email protected]

^ Canada Customer Support service available for models sold in Canada only.

Model:

MN10CCS / MN10CHCS

MN12CCS / MN12CHCS

MN14CCS / MN14CHCS

Series

SAFETY

READ AND SAVE THESE INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY AND

KEEP FOR FUTURE REFERENCE. IN CASE THERE IS ANY

INCONSISTENCY OR CONFLICT BETWEEN THE ENGLISH

VERSION AND ANY OTHER LANGUAGE VERSION OF THE

CONTENT OF THIS MATERIAL, THE ENGLISH VERSION

SHALL PREVAIL.

WARNING:

• DO NOT operate the unit with a damaged plug or loose wall outlet. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

DO NOT cover the air intake and exhaust when in use.

DO NOT place objects on or sit on the unit.

Always turn off and unplug the unit when cleaning or servicing.

DO NOT use the appliance if it is damaged.

If service is needed contact an authorized service agent.

Unplug the unit when stored or not in use.

DO NOT pull or carry the appliance by the power cord.

DO NOT pinch the power cord in the door and DO NOT pull it along edges or sharp corners.

DO NOT run the power cord under carpeting and rugs.

Use caution to prevent tripping on cord.

DO NOT use the device in the following cases:

- Near a fire source

- In areas where gasoline, paint or other flammable

goods are stored

- In an area where the water can be projected

DO NOT touch the plug or the device with wet hands.

Basic safety precautions should always be followed when using electrical appliances.

EN

SAFETY (CONTINUED)

This appliance has been manufactured for use in domestic environments and should not be used for other purposes.

Only use the installation kit provided to install this unit.

DO NOT attempt to extend the Exhaust Hose or install this unit using other methods other than that shown in this manual. Improper installation will void any existing warranties.

DO NOT use an extension cord with this unit.

This appliance can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by children without supervision.

Never insert your fingers or rods into the air outlet. Take special care to warn children of these dangers.

The manufacturer is not liable for injury caused to persons or property damage due to non-compliance with maintenance instructions and improper use of the appliance.

The appliance shall be installed in accordance with national wiring regulations.

The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.

Children should be supervised to ensure that they do not play with the appliance.

EN

THANK YOU

Congratulations on your purchase of this Honeywell Portable Air Conditioner.

Regarding the information pertaining to the installation, handling, servicing, cleaning and disposal of the appliance, please refer to the below paragraph of the manual.

USER TIPS

Portable Air Conditioners are ideal for spot cooling. The compressor, condenser and evaporator are housed in a compact unit. The air is dehumidified and cooled while a flexible Exhaust Hose sends heat outside. The air conditioner includes a window venting kit.

No permanent installation is needed. The unit is easy to move from room to room and offers a truly flexible air conditioning solution.

Auto Evaporation System - The unit automatically evaporates the condensate through the Exhaust

Hose. There is no need to empty the drainage tank except in humid conditions. Read and follow the instructions carefully.

To ensure optimal efficiency of the product, keep doors and windows closed when it is used as an air conditioner or dehumidifier. If the product is being used with the fan function only, an open window could improve air circulation.

Cooling, Heating* and Dehumidifying

Operation

Fan Operation

Important:

Before installing the unit, place it UPRIGHT for 1 hour before use to allow the refrigerant to stabilize.

Manually adjust the air vent located at the top of the unit to adjust the direction of air flow.

Follow installation instructions to set up the unit.

Plug the unit into a properly grounded circuit. DO NOT plug into an extension cord.

EN 1

*Applicable for models with Heating feature only.

PARTS DESCRIPTION

4

1) Control Panel

(Incl. Signal Receptor)

2) Air Outlet

3) Handle

4) Casters

5) Upper Dust Filter

6) Upper Grill

7) Exhaust Hose Connector

2

1

3

9

10

8

5

6

8) Power Supply Cord

9) Remote Control

10) Lower Drain Plug with Plastic Cap

(Air Conditioning Mode)

11) Upper Drain Plug

(De-humidifier Mode)

12) Lower Dust Filter

13) Lower Grill

11

7

13

12

EN 2

INSTALLATION

It is important that the installation instructions below are followed for successful installation of this

Portable Air Conditioner. Please call Customer Support if you have any difficulties or queries regarding these installation procedures.

1 2 3 x1 x1

4 5 x1 x1

Installation Kit:

1. Window Bracket Kit (1 Set)

2. Window Bracket Panel Adapter (1 Piece)

3. Exhaust Hose Connector (1 Piece)

4. Hole Cover

5. Exhaust Hose x1

(1 Piece)

(1 Piece)

Installation Steps:

1.

Exhaust Hose Connector, Exhaust Hose and window bracket panel adapter are pre-assembled inside the package.

Hose:

Length: 12" to 47" (30 cm to 120 cm)

EN 3

INSTALLATION (CONTINUED)

2. The Window Brackets allow you to install to windows and balcony doors of different heights or width.

19.7" (50 cm)

1 part

19.7" (50 cm) to

38.2" (97 cm)

2 parts

Adjustable Knobs

47.2" (1.2 m)

3 parts

To install the window bracket to the window frame, you need to adjust the height or width of the window bracket by extending the length according to the height or width of the window. When the length is set, tighten the Adjustable Knobs (preinstalled on the window bracket) to ensure the window bracket is secured in the desired position. Use one or all three pieces of window bracket as needed.

Note: After setting the window bracket to the size of your window, please remove it from the window and follow the instructions below.

3. Connect the Exhaust Hose to the rear exhaust outlet on the back of the unit. Rotate clockwise to ensure the knob mechanism is locked in place. Anticlockwise to unlock the knob mechanism.

EN 4

INSTALLATION (CONTINUED)

4. Connect the window bracket to the window bracket panel adapter. Slide-in the window bracket panel adapter then rotate clockwise until it is locked in place.

5. Connect the window bracket to the window.

6. The Portable Air Conditioner is now ready to use.

EN 5

INSTALLATION (CONTINUED)

IMPORTANT: Do not replace or lengthen the Exhaust Hose as this could cause the unit to malfunction.

20" (50 cm)

NOT RECOMMENDED RECOMMENDED

WARNING: Any warranties included with this product will be voided if an extra extension hose is added to the originally provided installation kit or if the installation is performed differently than the manufacturer's instructions, without proper consultation. Please contact Customer Support for help with installation procedures if needed.

The supplied Exhaust Hose has a diameter of 5" (12.7 cm) and can be extended from

12" to 47" (30 cm to 120 cm).

Do not bend (to the extent shown below) the Exhaust Hose. A bent hose will block exhaust air and cause the unit to malfunction or shut-off.

Make sure the back of the unit is at least 20" (50 cm) away from the wall. Do not place the unit in front of curtains or drapes as this could obstruct the airflow.

EN 6

USE & OPERATION

CONTROL PANEL

(6) (5) (4) (4) (3) (1),(2)

STOP

1) Power Control / Standby Mode

2) Warning Light (when flashing)

3) Mode Control

4) Timer / Temperature Set Controls

5) Fan Speed Control

FUNCTION BUTTONS

POWER CONTROL

The Power Control turns the unit on and off. When the unit is plugged in, this button lights up indicating it is in a Standby Mode ready to be switched on anytime.

WARNING LIGHT

Condensation may accumulate in the unit.

If the internal tank becomes full, the Power Control light will flash and the unit will not operate until the unit has been drained (refer to Water Condensation Drainage).

After switching the air conditioner off, you must wait 3 minutes before switching it back on again.

MODE CONTROL

Settings: Air Conditioning, Heating*, Dehumidifying, Fan.

The corresponding indicator light will illuminate to indicate the current mode setting.

• Air Conditioning Mode

Adjust fan speed and air temperature to suit your desired comfort level.

Temperature setting range is 16°C - 32°C (61°F - 89°F).

EN 7

*Applicable for models with Heating feature only.

USE & OPERATION (CONTINUED)

FUNCTION BUTTONS (CONTINUED)

• Dehumidifying Mode

Air is dehumidified as it passes through the unit, without being in full cooling mode.

If room temperature is higher than 25°C (77°F) fan speed can be adjusted; otherwise fan speed is preset to LOW.

Note: If the unit will be used mainly as a dehumidifier, do not connect the Exhaust Hose.

Continuous drainage is then necessary (refer to Continuous Draining for Dehumidifier Mode).

IMPORTANT: The Dehumidifier mode is used to support moisture reduction but should not be expected to dehumidify to the same degree as a standard dehumidifier-only appliance. The built-in dehumidifier automatically adjusts dehumidification based on ambient room temperatures.

It is not possible to adjust to a desired humidity percentage. The front display only shows the current AND desired temperatures. It does not show humidity levels.

• Fan Mode

For air circulation without air conditioner cooling.

• Heating Mode*

This unit uses Heat-Pump technology which reverses the air conditioning cooling cycle by transferring heat from the outside into the room – this is more energy efficient than traditional electric heaters that generate heat instead of transferring heat into the room. These properties make this heater ideal for use in autumn or spring when outdoor temperatures are not severely cold, or as supplemental heating in colder rooms of your home.

When heating mode is selected the indicator light will shine. Heating is activated only when the ambient temperature is below 25°C (77°F). In this mode, the desired temperature can be set between 16°C- 25°C (61°F - 77°F).

Note: The Exhaust Hoses must vent outside the room when using heating mode.

IMPORTANT: The Heat pump draws moisture from the air which then condenses into the internal water tank. The unit will pause operation when the tank is full and will restart when the tank has been emptied. It is recommended to use the heating mode in a room with 50% humidity or lower. Avoid operating moisture-producing products or appliances such as a humidifier or a kettle when using the unit in heating mode.

See the “Draining Water Condensation in Heat Mode” section for more information on draining the water tank.

EN 8

*Applicable for models with Heating feature only.

USE & OPERATION (CONTINUED)

FUNCTION BUTTONS (CONTINUED)

TEMPERATURE / TIMER SET CONTROLS

Used for adjusting the timer and thermostat.

The default display is setting temperature.

In cooling mode, when ▼ or ▲ button is pressed, the set temperature is displayed and may be adjusted. After 10 seconds the display will revert back to room temperature. Temperature is only adjustable in cool mode. The time is adjustable between 1 - 24 hours.

Note: By pressing both ▼ or ▲ buttons at the same time, the display will toggle between

Celsius(°C) and Fahrenheit(°F).

FAN SPEED CONTROL

3 Settings: High, Medium and Low.

TIMER CONTROL

While the unit is turned on, press the timer button then press the ▼ or ▲ to select the number of hours you would like the unit to continue to run. The unit will turn off automatically.

AUTO TURN OFF:

While unit is running, press the ▼ or ▲ button to select the number of hours you want the unit to run in air conditioning mode.

AUTO TURN ON:

When unit is in a standby mode (plugged in with power light on), then press the ▼ or ▲ button to select the number of hours until you want the unit to automatically start running.

EN 9

USE & OPERATION (CONTINUED)

REMOTE CONTROL

The functions work the same as the Portable Air Conditioner's Control Panel.

All key functions can be accessed from the remote control.

Power Control

ON / OFF

Fan Speed Control

• HIGH • MID • LOW

Temperature / Timer Set

Used for adjusting the timer and temperature.

When the ▼ or ▲ key is pressed, the set temperature is displayed and may be adjusted

Timer setting is available from 1 - 24 hours by pressing the key ▼ or ▲ .

Timer Control

In running mode: Auto switch off

In stand-by mode: Auto switch on

Press ▼ or ▲ button to adjust the time setting for 1 hour intervals.

Mode Control

Press this button to change the operation mode in the order of:

Air Conditioning Dehumidifying

Heating * Fan

*Applicable for models with Heating feature only.

Note:

• Battery Installation: Remove the cover on the back of the remote control and insert two AAA batteries with + and - pointing in the proper direction according to the polarity markings.

Caution:

• Use only two AAA or IEC R03 1.5V batteries.

Remove the batteries if the remote control is not in use for a month or longer.

All batteries should be replaced at the same time, do not mix with old batteries.

Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

Properly dispose of used batteries.

This device complies with part 15 of the FCC Rules. Operation is subject to following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment info an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

EN 10

CLEANING & MAINTENANCE

Appliance Maintenance:

1.

Turn off the appliance before disconnecting the power supply.

2.

Only clean the appliance with a soft dry cloth.

Dust Filter Maintenance:

The dust filter is to be cleaned every two weeks to maintain air cooling efficiency. Please follow the below instructions for cleaning the dust filter:

1.

2.

3.

4.

Switch off and unplug the air conditioner from the electrical outlet.

Remove the Upper Dust Filter and the Lower Dust Filter.

Gently wash using water and/ or diluted liquid dishwashing detergent.

Rinse thoroughly and gently shake excess water from the filters. Make sure the filters are dry before reinstalling.

Note : You may use a vacuum cleaner to remove dust.

Replace the Upper Grill and the Lower Grill onto the unit.

Upper

Dust Filter

Rear Grill

WARNING : DO NOT power or operate the Air Conditioner when cleaning or when the Dust Filter is removed from the unit, or if there is a loose-fitting Dust Filter. DO NOT attempt to handle or touch any of the parts or wiring inside the Rear Grill after the Dust Filter has been removed from the unit.

Doing so can cause serious injury or electrical shock.

End of Season Storage & Maintenance:

If the appliance will not be used for a long time, follow these steps:

1.

2.

3.

4.

Be sure to drain the left-over water condensation. Remove the lower drain plug and use a shallow pan to collect the water (make sure to replace the drain plug when finished).

To dry excess moisture, run the unit in Fan only mode for 30 minutes before storing.

Turn off and unplug the air conditioner from the power supply.

Remove the dust filter and clean with water. Dry the dust filter and then reinstall.

EN 11

CLEANING & MAINTENANCE (CONTINUED)

5.

Disconnecting the Window Installation Kit:

Remove the Exhaust Hose from the unit by rotating anti-clockwise to unlock the knob mechanism then sliding out.

Remove the window bracket panel adapter from the window bracket by rotating anti-clockwise then pulling away.

It is recommended to store the Window Kit parts in a bag together with the Remote Control and placing them together with the air conditioner unit.

If needed, you can clean the Window Kit with a damp cloth and water before storing.

Make sure all parts of the Window Kit are dry before storage.

6.

7.

8.

Cover the air conditioner with a cloth/ plastic bag before storage, to protect from dust and scratches collecting on the surface of the unit.

It is recommended to coil the power cord before storing to ensure the cord is protected from bents and creases.

Store the air conditioner in a cool, dry place, away from direct sunlight.

EN 12

WATER CONDENSATION DRAINAGE

When there is excess water condensation inside the unit, the air conditioner stops running and shows a warning light (the Power Control button flashes with a red light). This warning light indicates that the water condensation needs to be drained using the following procedures:

Manual Draining in Cooling, Dehumidifying and Heating* Modes

Water may need to be drained in high humidity areas.

1.

2.

3.

4.

5.

6.

Unplug the unit from power source.

Place a shallow pan under the lower rubber drain plug.

See diagram.

Remove the lower rubber drain plug.

Water will drain out and collect in the shallow pan.

After the water is drained, replace the lower rubber drain plug firmly.

You can now turn on the unit.

Plastic Cap and Lower

Drain Plug

Shallow Pan

(Not included)

If you find that there is a high volume of condensation and a shallow pan is not enough for your use, you can use a large pan to drain. Follow the below instructions carefully:

1.

2.

3.

Find a flat, stable board that is up to 1" thick. The base could be a wooden board purchased from your local hardware store, with a minimum base dimension of 20"

(length) x 17" (width) x 1" (thick).

The base should be large and sturdy enough to fit the

Portable Air Conditioner on top. The air conditioner must be stable and not rock or move when positioned on this base and not easy to topple over.

Drain the water from the lower drain plug as needed, into a larger pan or through a drain tube. If using a drain tube, you can purchase vinyl tubing which has an outside diameter of 5/8" and an inside diameter of ½".

Remember the drain tube must be positioned lower than the drain plug so the water condensation does not flow backwards back into the air conditioner.

Wooden Board

Height: up to 1"

Plastic Cap and Lower

Drain Plug

Large Pan

(Not included)

WARNING: For safety reasons, the Portable Air Conditioner must NOT be positioned on a base that is higher than 1" from the floor. This is only recommended if you have a stable, flat base to position the

Portable Air Conditioner on safely.

EN 13

*Applicable for models with Heating feature only.

WATER CONDENSATION DRAINAGE (CONTINUED)

Continuous Draining for Dehumidifier Mode

While using the unit in dehumidifier mode, continuous drainage is recommended.

1.

2.

3.

4.

5.

6.

Unplug the unit from power source.

Remove the upper rubber drain plug.

Some residual water may spill so please have a pan to collect the water. See diagram.

Connect the drain connector to a ¾" hose or standard garden hose (not included).

The water can be continuously drained through the drain tube into a floor drain or bucket.

Replace the drain plug.

You can now turn on the unit.

Upper Rubber

Drain Plug

Drain Tube

IMPORTANT: It is NOT recommended to connect the drain hose for continuous drainage while the unit is switched ON in air conditioning cooling mode. Doing so can reduce the cooling efficiency of the Portable Air Conditioner. Only drain the water condensation when the unit is switched off.

Continuous drainage is only suitable when the unit is set up in Dehumidifier mode.

IMPORTANT: The water cannot be drained using the continuous drain option in heating* mode.

In Heating mode, the internal water tank collects condensation faster and may require more frequent emptying of the tank in more humid rooms. It is recommended to use the heating mode in a room with 50 % humidity or lower. Avoid operating moisture-creating products or appliances such as a humidifier or a kettle when using the unit in heating mode.

14

*Applicable for models with Heating feature only.

TROUBLESHOOTING GUIDE

The following troubleshooting guide addresses the most common problems. If problems persist, call customer support. Unplug and disconnect the appliance from the power source before attempting to troubleshoot.

PROBLEM POSSIBLE CAUSE SOLUTION

No electricity.

Check for power.

The air conditioning unit does not start

Batteries in the remote control need to be replaced.

The power cord is not properly plugged in.

Change remote control batteries.

Remove and reconnect the power cord.

The safety LCDI plug has tripped (USA / Canada /

Mexico only).

Reset the safety LCDI plug, if problem persists contact our customer support

(USA / Canada / Mexico only).

The thermostat temperature setting is too close to room temperature.

Lower the set temperature.

Runs a short while only

Air outlet is blocked.

Make sure the Exhaust Hose is properly connected.

There are tight bends in the air Exhaust Hose.

Connect Exhaust Hose as per instructions on page 3.

In Heating

Mode*,the unit keeps switching off frequently

The room is too humid.

Water Tank needs to be emptied.

In heating mode, the heat pump condenses moisture from the air into the internal water tank. In more humid rooms, it will collect faster and need to be emptied out more frequently. It is recommended to use the heating mode in 50% humidity or less.

Switch off any appliances such as a humidifier or kettle to avoid extra moisture build up in the room when operating in heating mode.

*Applicable for models with Heating feature only.

EN 15

TROUBLESHOOTING GUIDE (CONTINUED)

PROBLEM POSSIBLE CAUSE SOLUTION

A door or window is open. Make sure the window or door is closed.

The dust filter is dirty.

Clean the dust filter.

The Exhaust Hose is detached.

Reinstall Exhaust Hose properly

(refer to Installation section).

Runs but not cooling

Temperature setting is too high.

Reduce temperature setting on control panel.

Air outlet or intake is blocked.

Remove blockage.

Room exceeds recommended size.

Move unit to smaller room.

Large size or number of windows are decreasing cooling effectiveness.

Cover windows with curtains or blinds.

Will not run and

Power button is blinking

(water full indicator)

Excess water condensation inside the tank.

Drain the water (refer to Water Condensation

Drainage).

EN 16

TROUBLESHOOTING GUIDE (CONTINUED)

PROBLEM POSSIBLE CAUSE SOLUTION

Heating function not activated yet.

The ambient temperature is too high.

Check that the Heating function has been activated.

will be illuminated when the

Heater is switched ON.

Heater* is not switching ON.

Heating is activated only when the ambient temperature is below

25°C (77°F).

Switch on the Heating function when the ambient temperature reaches below 25°C (77°F).

*Applicable for models with Heating feature only.

17

JMATEK North America LLC

Mahwah, New Jersey 07495 USA

Email: [email protected]

Web: www.jmatek.com

Made in China

© 2019 JMATEK Limited. All rights reserved.

The Honeywell Trademark is used under license from Honeywell International Inc.

Honeywell International Inc. makes no representations or warranties with respect to this product.

This product is manufactured by Airtek Int'l Corp. Ltd.

(subsidiary of JMATEK Ltd.).

advertisement

Related manuals

Download PDF

advertisement