User manual | Otis A6164BP Complete, 7058B Slim Line Relay, B6754A & B Heavy-Duty, A6754Y Heavy-Duty, E6754A, B, C, D & Y Heavy-Duty, E6830A, B & D Line Starter Switch Index
Add to My manuals84 Pages
Otis A6164BP, 7058B, B6754A, A6754Y, E6754A, B6754B, E6754B, E6754C, E6754D, E6754Y, and C6754 are components for elevator systems. This document provides specifications for replacement relays and parts for these models. These relays are used in elevator control systems to provide switching and timing functions. They are manufactured to specific electrical and mechanical standards. The document contains diagrams, part numbers and descriptions of components. It also lists replacement parts and repair paks available from Adams Elevator.
advertisement
▼
Scroll to page 2
of
84
Otis Index for Pages 226-308 Bearings ................................................................................ 274 Insulators ............................................................................... 302 Brush holders ........................................................ 282, 284, 287 Interlocks ........................................................................288-291 Brushes ..........................................................................285-286 Lamps ................................................................................... 269 Bumpers ............................................................................... 279 Magnet switches ................................................................... 226 Bushings ............................................................................... 272 Mechanical pushbutton switches ................................... 265, 270 Buttons ..........................................................................260-269 Mechanical switches.......................................................292-294 Cam & clamp assembly ................................................. 252, 291 Motor bearings ...................................................................... 283 Capacitors/timers .......................................................... 275, 278 Motor brushes (carbon) ..................................................285-286 Carbon contacts.................................................................... 300 Packing, machine .................................................................. 283 Carbon holders...................................................... 282, 287, 301 PI lenses ................................................................................ 267 Chain, door closer ................................................................. 291 Pile-up assemblies................................................................. 232 Coils ...................................... 228, 229, 232, 236, 237, 246, 247 Printed circuit boards......................................................305-307 Contacts ...................................... 228, 229, 230, 236, 241, 244, ...................................................... 245, 254, 287, 298, 299, 300 Rail gibs ........................................................................ 302, 303 Copper contacts ............................................................298-299 Relay repair paks ........................................... 229, 230, 238, 241 Door edge sight guards/shields ............................................. 295 Relays ............................................................................226-247 Door gibs ...................................................................... 291, 304 Resistors ....................................................................... 278, 279 Door hanger rollers ................................................................ 256 Rheostat................................................................................ 271 Door interlocks ...............................................................288-291 Rollers ............................................................................255-259 Door keys .............................................................................. 297 Selector Parts .................................................................248-253 Door motors .......................................................................... 271 Selector tape ......................................................................... 250 Door parts ......................................................................288-291 Sheaves ................................................................................ 272 European switch assembly .................................................... 269 Shunts ........................................................... 237, 238, 242, 282 Fixture components ........................................................260-270 Spirator ................................................................................. 291 Gaskets ..........................................................................279-281 Springs .................................................. 237, 291, 295, 296, 301 Gibs ...............................................................................302-304 STOP switches ...................................................... 268, 270, 276 Gongs ................................................................................... 279 Switch arms, replacements.................................................... 294 Guide rollers .......................................................................... 258 Switches ............................................................... 251, 253, 271 Guide shoes .................................................................. 303, 304 Touch tubes........................................................................... 264 Hall stations ................................................... 262, 263, 265, 267 Transformers ......................................................................... 271 Hanger rollers ........................................................................ 256 Upthrust rollers ...................................................................... 257 Hardware .......................................................272-275, 301, 302 Washers ........................................................................ 301, 302 Rectifiers ............................................................................... 277 Hydraulic packing ...........................................................280-281 www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 225 Otis Replacement Relays/A6164BP Complete Replacement Otis switch, model no. O21A32Y1 Adams O2100-Series Replacement Magnet Switches for Otis Type A6164BP Adams tests every single switch/relay. Our complete replacement switches (O2100 series) for the Otis Type A6164BP Magnet Switch are shipped with a coil. COMPLETE REPLACEMENT A6164 RELAYS If you are unsure of the Otis part no. for the switch you are replacing, you can still determine the proper Adams part number by following the guide below. You will need to know: 1) Switch arrangement 2) Number of MAKING contacts 3) Number of BREAKING contacts 4) Type of coil SAMPLE PART NO.: O21 A 3 2 Y1 Switch type (A6164BP) B=General Purpose, 4-lead coil C=Self-Holding, 3-lead coil Type of coil This number will appear on Otis coils preceded by 222C (Example: 222CY1) No. of BREAKING contacts No. of MAKING contacts D=Self-Holding, 4-lead coil NOTE: For condensor-timed switches, order A or B plus suitable condensor Adams Make/Break* part no. General Purpose, 2- & 3-Lead Coil O21A02Y1 2B O21A04Y1 4B O21A04Y2 4B O21A11Y1 1M 1B O21A13Y1 1M 3B O21A14Y1 1M 4B O21A14Y2 1M 4B O21A20Y10 2M O21A20Y3 2M O21A20Y1 2M O21A22Y2 2M 2B O21A22Y1 2M 2B O21A23Y1 2M 3B O21A23Y2 2M 3B O21A31Y3 3M 1B O21A31Y1 3M 1B O21A32X1 3M 2B O21A32Y10 3M 2B O21A32Y2 3M 2B O21A32Y1 3M 2B O21A40Y1 4M O21A41X1 4M 1B O21A41Y10 4M 1B O21A41Y1 4M 1B O21A50Y1 5M O21A50Y2 5M General Purpose, 4-Lead Coil O21B23Z1 2M 3B O21B23Z5 2M 3B O21B32Z1 3M 2B O21B32Z5 3M 2B O21B41Z1 4M 1B O21B50Z1 5M Self-Holding, 3-Lead Coil O21C20X1 2M O21C23X1 2M 3B O21C31X1 3M 1B O21C32X1 3M 2B O21C40X1 4M O21C41X1 4M 1B O21C50X1 5M Self-Holding, 4-Lead Coil O21D14Z1 1M 4B O21D23Z3 2M 3B O21D32Z1 3M 2B O21D32Z3 3M 2B O21D41Z1 4M 1B Adams coil no. H5317 H5317 H5318 H5317 H5317 H5317 H5318 H7587 H5319 H5317 H5318 H5317 H5317 H5318 H5319 H5317 H5328 H7587 H5318 H5317 H5317 H5328 H7587 H5317 H5317 H5318 Fax: 1-847-581-2949 • US: 1-800-929-9247 • 102CY1 104CY1 104CY2 111CY1 113CY1 114CY1 114CY2 120CY10 120CY3 120CY1 122CY2 122CY1 123CY1 123CY2 131CY3 131CY1 132CX1 132CY10 132CY2 132CY1 140CY1 141CX1 141CY10 141CY1 150CY1 150CY2 H7501 H7555 H7501 H7555 H7501 H7501 623CZ1 623CZ5 632CZ1 632CZ5 641CZ1 650CZ1 H5328 H5328 H5328 H5328 H5328 H5328 H5328 320CX1 323CX1 331CX1 332CX1 340CX1 341CX1 350CX1 H7501 H7500 H7501 H7500 H7501 714CZ1 723CZ3 732CZ1 732CZ3 741CZ1 *MAKING contacts are normally open [NO]; BREAKING contacts are normally closed [NC]. 226 Otis part no. (A6164BP-) www.adamselevator.com Replacement Relays/A616BP Components Otis TYPE A6164BP DC MAGNET SWITCH SCHEMATIC REPLACEMENT PARTS FOR A6164BP RELAYS Key no. 1 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 For more info., see page 228 Adams part no. Replaces Otis no. Description O21C1 150P25 Stationary "L" contact O21C2 150P26 Stationary contact, 25/8" L, make O21C3 150P27 Stationary contact, 3 3/32" L, make O21C4 150P4 Movable contact O21C5 93D2 Leaf spring O21B1 306CN1 Contact base O21B2 306CZ1 Contact base O21B3 306EF1 Contact base O21A1 B374FV1 Magnet frame O21A2 245Z2 Armature 2/A477BH1 stop O21A3 384FN1 Brass guard for armature O21A4 400AY1 Magnet core w/o groove O21A5 129BR1 Incl. 1 brass, 1 phenolic shim O21S1 90LA4 Compression spring O21S2 90TA6 Compression spring O22S2 90VA16 Compression spring O21P1 433AG1 Switch panel O21B4 298BV1 Phenolic base, 7/8" x 15/8" O21P2 99G1 Terminal stud O21B5 137E5 Base bushing O21A6 131BH1 Magnet core washer O21A7 A477BJ1 Formed steel pivet stop Hxxxx 222-xx Coil (see p. xxx) O521B 175J89 Shunt, 43/4" L O21T1 102DA1 I.D. tag O521C 175J90 Shunt, 53/4" O520F 175J6 Shunt, 33/4" COMPONENTS FOR SELF-HOLDING RELAYS (NOT SHOWN) O21A8 400AY2 Magnet core w/groove O21A9 245Z1 Armature O21K1 A79AN1 Kickoff assembly pin O21K2 316BCA1 Kickoff assembly bracket O21S2 90TA6 Main compression spring O21S4 90KA3 Kickoff spring www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 227 Otis Replacement Relays/A6164BP Components O21S1 O21A9 O521C O21A2 O21A8 O21S2 O21S4 O21B3 O21B2 O21K2 O21K1 O520F O21T1 O21B1 SHUNTS & SPRINGS SELF-HOLDING SWITCH COMPONENTS Adams part no. Adams part no. Otis part no. Description O21A8 O21A9 O21K1 O21K2 400AY2 245Z1 A79AN1 316BCA1 Magnet core w/groove Armature Kickoff assembly pin Kickoff assembly bracket 3 O521A O521B O521C O521D Otis part no. O521F O520F O21T1 O21S1 175J88 175J89 175J90 175J122 175J150 175J93 175J6 102DA1 90LA4 O21S2 90TA6 O21S4 90KA3 BAKELITE BASES/ARMATURE Description 3 Shunt, 3 /4”L Shunt, 4 3/4”L Shunt, 53/4”L Shunt, 7 5/8”L Shunt, 4 3/4”L Shunt, 6 1/2”L Shunt, 3 3/4”L I.D. tag Compression spring, 1”L Main compression spring, 2 7/32”L Kickoff spring, 9/16”L Adams part no. Otis part no. O21B1 306CN1 O21B2 306CZ1 O21B3 306EF1 O21A2 1245Z2 Description Bakelite base for O21C1 “L” contact (2 required) Bakelite base for O21C4 contact Bakelite base, mates with O21B2 Armature for A6164BP general-purpose relays (cad-chromate plated) 2 Shunts, Springs and Replacement Coils are also available. 1 Replacement Coils for A6164BP Relays 4 6 Identical to their Otis counterparts, the coils listed here are the models used most frequently on A6164-BP Controller switches. O2100-SERIES CONTACTS Adams part no. Otis part no. 1 O21C1 150P25 2 O21C2 150P26 3 O21C3 150P27 4 O21C4 150P4 5 6 O21C5 O27C6 93D2 150H10 228 Description Steel “L” contact w/ 1/4”-dia. silver tip; 13/4”L x 5/8” Making contact w/ 1/4”-dia. silver tip; 2 5/8”L Breaking contact w/ 1/4”-dia. silver tip; 3 3/32”L Movable contact w/ 1/4”-dia. silver tip; 21/8”L Leaf spring, 15/8”L x 5/16”W Movable contact w/ 1/4” double silver tip, 15/8”L x 7/16”W; use on A6164 definite voltage switch Fax: 1-847-581-2949 H7500 Adams replacement coils are wound on glass-filled bobbins molded from green Lexan®. 5 Key no. H5317 Lexan—Reg TM General Electric Company • US: 1-800-929-9247 • H5328 ADAMS REPLACEMENT COILS Adams part no. H5317 H5318 H5319 H5320 H7582 H7505 H7507 H7585 H7587 Otis part no. 222CY1 222CY2 222CY3 222CY4 222CY5 222CY6 222CY7 222CY8 222CY10 www.adamselevator.com Adams part no. H7588 H5328 H5329 H7500 H7501 H7503 H7504 H7555 Otis part no. 222CY11 222CX1 222CX2 222CZ3 222CZ1 222CZ2 222CZ4 222CZ5 Otis Replacement Relays/A6164BP Repair Paks 17 16 15 14 8 11 9 13 10 6 2 1 7 5 4 3 REPAIR PAKS FOR A-6164BP SWITCHES Best use: Keep one or more Repair Pak at every job site...to eliminate trips back to the warehouse. Paks available with or without replacement coils. OK2101 Repair Pak. Contains items 1 thru 12. Item 12 not shown. Coils not included. OK2102 Repair Pak. Contains items 1 thru 17. Item 12 not shown. Coils included. EACH OK2101/2102 REPAIR PAK INCLUDES: Photo key 1 2 3 4 5 6 7 8 9 10 11 12 Adams part no. O21A2 O21A3 O21C1 O21C2 O21C3 O21C4 O21C5 O521C O521B O520F O21T1 — Otis part no. Description 245Z2 384FN1 150P25 150P26 150P27 150P4 93D2 175J90 175J89 175J6 102DA1 — Armature Guard, brass “L” contact, stationary “Make” contact, stationary “Break” contact, stationary Contact, movable Leaf spring Shunt, 53/4”L Shunt, 43/4”L Shunt, 33/4”L I.D. tag (gray) Assorted hardware & springs Quantity 1 2 2 12 12 36 30 2 10 2 6 1 pkg. OK2102 ALSO INCLUDES: 13 14 15 16 17 H5317 H5318 H5328 H7501 H7503 222CY1 222CY2 222CX1 222CZ1 222CZ2 Coil Coil Coil Coil Coil www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 2 2 2 1 1 229 Otis Replacement Relays/A6164BP Value Paks Value Paks for A6164BP Switches Each of the Paks described below features 20-250 each of the movable contacts, stationary contacts and shunts you need most to repair Otis A6164BP switches. OVP2110 VALUE PAK Adams part no. Otis part no. Quantity O21C4 O21C5 150P4 93D2 250 50 MOVABLE CONTACT VALUE PAK Stock a Repair Pak for convenience. STATIONARY CONTACTS VALUE PAK Adams part no. OVP2111 Value Pak. Contains 225 stationary contacts. Adams part no. OVP2110 Value Pak. Contains 250 movable contacts + 50 leaf springs. O21C4 movable contact, both sides shown OVP2111 VALUE PAK Adams part no. O21C2 O21C3 O21C1 Otis part no. Quantity 150P26 150P27 150P25 100 100 25 O21C2 O21C1 O21C3 O21C5 leaf spring SHUNTS VALUE PAK Adams part no. OVP2112 Value Pak. Contains 160 shunts. OVP2112 VALUE PAK Adams part no. Otis part no. Length Quantity O521A O521B O521C O521D 175J88 175J89 175J90 175J122 3 3/4” 4 3/4” 53/4” 75/8” 20 100 20 20 O521D O521B O521C O521A 230 Fax: 1-847-581-2949 • US: 1-800-929-9247 • www.adamselevator.com Otis Replacement Relays/7058B Complete Adams Complete Replacement Relays for Otis “Slim Line” Our complete replacement relay, Otis Type 7058B-series “Slim Line”, is only available WITH a coil. Order complete relay from the chart below or use the method described below left. COMPLETE 7058B “SLIM LINE” RELAYS Complete “Slim Line” relay, part no. O29A62D7 Adams part no. If you are unsure of the Otis part no. for the relay you are replacing, you can still determine the proper Adams part number by following the guide below. Adams part # = O - 2 9 A 2 6 F 7 Type of relay (7058B) Type of coil This number will appear on Otis coils preceded by 222F (Example: 222FF7) Magnet arrangement A = control or timing relay C = self-holding relay No. of BREAKING contacts No. of MAKING contacts Detail of “Slim Line” make/break contacts Includes Adams coil no. Make/ Break* Replaces Otis part no. Control or Timing Relay O29A08F7 0M 8B O29A17F7 1M 7B O29A26F7 2M 6B O29A26F8 2M 6B O29A35F7 3M 5B O29A35F8 3M 5B O29A44F7 4M 4B H2107 H2107 H2107 H2108 H2107 H2108 H2107 7058B108FF7 7058B117FF7 7058B126FF7 7058B126FF8 7058B135FF7 7058B135FF8 7058B144FF7 O29A44F8 4M 4B H2108 7058B144FF8 O29A44F9 4M O29A44F11 4M O29A44F12 4M O29A44D7 4M O29A53F7 5M O29A53F11 5M O29A53F12 5M O29A62F7 6M O29A62D7 6M O29A71F7 7M O29A80F7 8M Self-Holding Relay O29C08D8 0M O29C17D8 1M O29C26D8 2M O29C35D8 3M O29C44D4 4M O29C44D8 4M 4B 4B 4B 4B 3B 3B 3B 2B 2B 1B 0B H2109 H2111 H2112 H2157 H2107 H2111 H2112 H2107 H2157 H2107 H2107 7058B144FF9 7058B144FF11 7058B144FF12 7058B144FD7 7058B153FF7 7058B153FF11 7058B153FF12 7058B162FF7 7058B162FD7 7058B171FF7 7058B180FF7 8B 7B 6B 5B 4B 4B H2158 7058B208FD8 7058B217FD8 7058B226FD8 7058B235FD8 7058B244FD4 7058B244FD8 O29C53D4 O29C53D8 O29C62D4 O29C62D8 O29C71D8 O29C80D8 3B 3B 2B 2B 1B 0B H2154 H2158 H2154 H2158 5M 5M 6M 6M 7M 8M H2158 H2154 H2158 7058B253FD4 7058B253FD8 7058B262FD4 7058B262FD8 7058B271FD8 7058B280FD8 Supercedes Otis no. 7058B124FF7 7058B120FF7 7058B122FF7 7058B140FF7 7058B142FF7 7058B120FF8 7058B122FF8 7058B142FF8 7058B120FF11 7058B120FF12 7058B142FD7 7058B160FF7 7058B222FD4 7058B220FD8 7058B222FD8 7058B240FD8 7058B242FD8 7058B260FD8 *MAKING contacts are normally open and BREAKING contacts are normally closed. www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 231 Otis Replacement Relays/7058B Components O295C1 O295C2 O295C3 O295C4 Pile-up assembly, part no. O295P9 CONTACT ARMS WITH 5/32” SILVER CONTACTS* 7055C PILE-UP ASSEMBLIES Adams part no. O295P1 O295P2 O295P3 O295P4 O295P5 O295P6 O295P7 O295P8 O295P9 O292 O293S1 Used on relay 7058B 0M 8B 108, 208 1M 7B 117, 217 2M 6B 126, 226 3M 5B 135, 235 4M 4B 120, 220 124, 224 140, 240 142, 242 122, 222 144, 244 5M 3B 153, 253 6M 2B 160, 260 162, 262 7M 1B 171, 271 8M 0B 180, 280 Plug-in base; incl. nut Compression spring, 11/4”L; see listing & photo on page 234 Make/ Break Replaces Otis part no. 7055C081 7055C171 7055C261 7055C351 7055C441 7055C531 7055C621 Supercedes Otis no. Adams part no. O295C1 O295C2 O295C3 O295C4 Otis part no. 179CH2 179CH4 179CG2 179CG4 *Sold only in packages of 10. 7055C205 7055C227 7055C241 7055C244 7055C406 7055C243 7055C602 7055C711 7055C801 306JL4 Plug-in base, part no. O292 (two shown) 90XA14 7058B REPLACEMENT COILS REPLACEMENT COILS FOR 7058B “SLIM LINE” RELAYS H2101 2-lead coil 232 Description Stationary, 411/64”L Stationary, 411/64”L Movable, 327/32”L Movable, 327/32”L Adams part no. Two-Lead Coils H2101 222FF1 H2105 222FF5 H2106 222FF6 H2107 222FF7 H2108 222FF8 H2109 222FF9 H2111 222FF11 H2112 222FF12 H2113 222FF13 Four-Lead Coils H2154 222FD4 H2158 4-lead coil Fax: 1-847-581-2949 • US: 1-800-929-9247 Replaces Otis no. • H2157 222FD7 H2158 222FD8 No. of turns/ wire size 10,940/41 2,736/35 860/29 12,432/40 6,420/37 9,345/39 3,192/34 4,136/36 780/28 Inner: 1,776/40 Outer: 10,064/40 Inner: 3,204/39 Outer: 6,942/39 Inner: 644/41 Outer: 9,078/39 www.adamselevator.com Otis Replacement Relays/Heavy Duty, Complete Adams Replacements for Otis Heavy-Duty Switches Adams manufactures and stocks the DC magnet switches that replace Otis Type B6754A & B, A6754Y, and E6754A, B, C, D & Y switches, as shown below. These switches/relays are replaced by Adams O2200-Series relays, illustrated on this page; replacement parts follow on the next pages. Our complete heavy duty replacment switches are only available WITH COILS. To order a complete switch: Identify the Adams part no. on the accompanying cross-reference chart. You can find the corresponding Otis switch number in the Otis Service Manual and on the back of the switch/relay being replaced. Or, use the chart below to identify the switch required and order by using the appropriate Adams part no. The chart also specifies type and number of main & auxiliary contacts, and whether the switch uses arc barriers or arc deflectors. O2201CD2 Magnet Switch COMPLETE REPLACEMENTS FOR B6754A & B, AND A6754Y RELAYS Main contacts Center Contact Outside Stationary Movable Stationary Movable Adams part no. Otis part no. Adams coil no. Description† O2200CD1 O2200CD2 O2200CD3 O2200CD4 O2201CD1 O2201CD2 O2201CD4 O2201CD5 O2202CD1 O2203CD3 B6754A121CD1 B6754A121CD2 B6754A121CD3 B6754A121CD4 B6754A122CD1 B6754A122CD2 B6754A122CD4 B6754A122CD5 B6754B120CD1 A6754Y162CD3 H6992 H6993 H6994 H7502 H6992 H6993 H7502 H6995 H6992 H6994 O22D1 O22D1 3 O22D1 main O22D1 making O22D1 O22D1 O22D1 O22D1 2 main making O22D1 1M, 2M/B O22D1 O2210EB1 O2210EB2 O2210EB3 O2210EB4 O2211EB1 O2211EB2 O2211EB4 O2211EB5 O2211EB6 O2212EB1 O2220EB1 O2221EB1 O2222EB1 O2230EB1 E6754A121EB1 E6754A121EB2 E6754A121EB3 E6754A121EB4 E6754A122EB1 E6754A122EB2 E6754A122EB4 E6754A122EB5 E6754A122EB6 E6754A222EB1 E6754B120EB1 E6754B121EB1 E6754B161EB1 E6754C121EB1 H7601 H7602 H7603 H7604 H7601 H7602 H7604 H7605 H7606 H7601 H7601 H7601 H7601 H7601 O2230EB2 E6754C121EB2 H7602 O2231EB2 E6754C122EB2 H7602 O2231EB4 E6754C122EB4 H7604 O2232EB2 E6754C162EB2 H7602 O2233EB2 O2234EB6 E6754D200EB2 E6754Y162EB6 H7602 H7606 O22C1 O22C1 O22C1 O22C1 O22C1 O22C1 O22C1 O22C1 O22C1 O22C9 O22D1 O22D1 O22D1 O22D1 O22D1 O22D1 O22D1 O22D1 none O22D1 O22C1 O22C1 O22C1 O22C1 O22C1 O22C1 O22C1 O22C1 none O22C7 Make/Break auxiliary contacts L&R L&R L&R L&R L&R L&R L&R L&R L&R L&R* Arc defl. ✓ ✓ ✓ ✓ Arc barrier ✓ ✓ ✓ ✓ ✓ ✓ COMPLETE REPLACEMENTS FOR E6754A, B, C, D & Y RELAYS 3 main making 2 main making 2M 1M/B 2M 1M/B 2M 1M/B 2M 1M/B 2M 1M/B 2 break 1M 2M/B O22D1 O22D1 O22D1 O22D1 O22D1 O22D1 O22D1 O22D1 O22D1 O22D3 O22D1 O22D1 O22D1 O22D1 O22C7 O22C7 O22C7 O22C7 O22C7 O22C7 O22C7 O22C7 O22C7 O22C3 O22C7 O22C7 O22C7 O22C7 O22D1 O22C7 O22D1 O22C7 O22D1 O22C7 O22D1 O22C7 O22D4 O22D4 O22D1 O22C3 O22C9 † MAKING contacts are normally open and BREAKING contacts are normally closed. O22D1 O22D1 O22D1 O22D1 O22D1 O22D1 O22D1 O22D1 O22D1 O22D3 O22C7 O22C7 O22C7 O22C7 O22C7 O22C7 O22C7 O22C7 O22C7 O22C3 ✓ ✓ ✓ ✓ ✓ O22D1 O22D4 O22D1 O22D4 O22D1 O22D4 O22D1 O22D4 O22D1 O22D4 O22C9 L&R L&R L&R L&R L&R L&R L&R L&R L&R L&R L&R L&R L&R* L&R O22C9 L&R O22C9 L&R ✓ O22C9 L&R ✓ O22C9 L&R* ✓ O22D1 O22C7 none L&R* ✓ none ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ none *Left-hand with reduced air gap. www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 233 Otis Replacement Relays/A & B, 6754 Components TYPE 6754, A6754 & B6754 DC MAGNET SCHEMATICS 39 O22S9 spring goes here 1 38 O22S5 spring goes here 32 2 30 36 33 31 REPLACEMENT PARTS FOR OTIS TYPE 6754, A6754 & B6754 RELAYS Adams part no. O22D1 O22D2 O22D3 Otis part no. 154AB1 154AB2 150AL3 O22K1 O22K2 O22H1 O22H2 O22C1 O22C3 A179AK3 A336BR1 276H1 6534B1 153Z1 150Y4/Y8 O22C6 153AE8 O22C11 153AE10 10 11 12 13 O22B1 O22R1 O22S1 O22S6 O22W1 O21C4 O21C5 O22C4 14 O22C5 15 16 17 O22W2 O22B2 O546B 306BR1 141Y1 90TA3 90YA25 133A6 150P4 93D2 150C13, 152AN1 150C14, 152AN2 128H1 306CJ1 176KA13 Key no. 1 2 3 4 5 6 7 8 9 234 Key no. Description Carbon contact Graphite contact Copper contact with 3/8” dia. silver tip Carbon holder with screw Carbon clamp Bakelite arc barrier Arc deflector Movable contact w/o tip Movable contact with 3/8” dia. silver tip Movable contact with 7/16” sq. silver tip Movable contact with 3/8” dia. silver tip and 7/16” sq. silver tip on reverse Base for movable contacts 1”L rivet with cotter pin Compression spring (making) Compression spring (break) Spring seat washer Movable contact for auxiliary Support blade for auxiliary Auxiliary stationary contact 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 Auxiliary stationary contact 38 Washer Auxiliary contact base Copper braid connector Fax: 1-847-581-2949 39 • US: 1-800-929-9247 Adams part no. O521A O22T1 O22A2 O22A3 O22A4 O22A1 Otis Description part no. 3 175J88 3 /4”L insulated connector 464BJ2 Fiber separator, 31/8” x 5/8” A245AE1 Magnet armature 384FS1 Brass guard 384EW2 Phenolic guard A374CP1 Frame assembly with magnet core and washer O22A5 A477BL1 Stop O22S2 90VA16 Kickoff spring O22S3 90EB5 Kickoff spring for 6754Y switch O22S7 90KB14 Kickoff spring (breaking contact) O22S8 90VA15 Kickoff spring (for 2M/1B switch) O21P2 99G1 Terminal stud, 13/8”L O22P3 99G2 Terminal stud, 2”L O22P1 A433Z1 Panel Hxxxx 222xxx Coil (see pages 216-217) O22K3 179AM1 Stationary contact holder O22C3 150Y4 Movable contact with 3/8” dia. silver tip O22J1 6543C Interlock (“airplane”) O22K3B 306CP1 Insulator O22A6 129BR2 Phenolic washer for coil O21T1 102DA1 I.D. tag O22D4 150W6 Threaded contact with 3/8” dia. silver tip and jamb nut O22BA1 6810A1 Auxiliary contact assembly w/o coil spring O22BA2 6810A3 Auxiliary contact assembly with coil spring O22S5 90LA11 Compression spring for auxiliary contact assembly O22S9 90PA4 Compression spring for arc deflector • www.adamselevator.com Otis Replacement Relays/C & E, 6754 Components 39 TYPE C6754 & E6754 DC MAGNET SWITCH SCHEMATICS O22S9 spring goes here 1 2 30 38 O22S5 spring goes here 36 31 REPLACEMENT PARTS FOR OTIS TYPE C6754 AND E6754 RELAYS 1 Adams part no. O22D1 O22D2 O22D3 Otis part no. 154AB1 154AB2 150AL3 2 3 4 5 6 O22K1 O22K2 O22H1 O22H2 O22C2 A179AK3 A336BR1 276H1 6534B1 — O22C3 150Y4/Y8 O22C6 153AE8 O22C7 153Z4 O22C8 150Y6 O22C9 150Y7 7 O22B3 306BR2 8 9 10 11 12 13 O22R1 O22S4 O22W1 O21C4 O21C5 O22C4 14 O22C5 15 O22W2 141Y1 90BB19 133A6 150P4 93D2 150C13, 152AN1 150C14, 152AN2 128H1 Key no. Description Carbon contact Graphite contact Copper contact with 3/8” dia . silver tip Carbon holder with screw Clamp for carbon Bakelite arc barrier Arc deflector Movable contact, offset, with 3 /8” square copper tip; 2 3/4”L Movable contact with 3/8” dia. silver tip Movable contact with 7/16” square silver contact; 23/4”L Movable contact, offset, without contact; 23/4”L Movable contact, offset, with 3 /8” dia silver tip; 23/4”L Same as O22C8 with silver contact on reverse Red phenolic base for movable contacts 1”L rivet with cotter pin Compression spring (make) Spring seat washer Movable contact for auxiliary Support blade for auxiliary Auxiliary stationary contact Adams part no. Otis part no. 16 17 18 19 20 21 22 23 O22B2 O546B O521A O22T1 O22AM2 O22AM3 O22AM4 O22AM1 306CJ1 176KA13 175J88 464BJ2 B245AE1 A384FS1 384EW3 B374CP1 24 25 26 27 28 29 30 31 O22A5 O22S2 O21P2 O22P3 O22P1 Hxxxx O22K3 O22C3 A477BL1 90VA16 99G1 99G2 A433Z1 222xxx 179AM1 150Y4 32 33 34 35 36 O22J1 O22K3B O22AM5 O21T1 O22D4 6543C 306CP1 129BR4 102DA1 150W6 37 O22BA1 6810A1 O22BA2 6810A3 38 O22S5 90LA11 39 O22S9 90PA4 Key no. 33 Description Auxiliary contact base Copper braid connector 33/4”L insulated connector Fiber separator, 31/8”x5/8” Magnet armature Brass guard Phenolic guard Frame assembly with magnet core & washer Stop Kickoff spring for make switches Terminal stud, 13/8”L Terminal stud, 2”L Panel Coil (see page 216-217) Stationary contact holder Movable contact with 3/8” dia silver tip; 23/4”L Interlock (“airplane”) Insulator Phenolic washer for coil I.D. tag Threaded contact with 3/8”-dia. silver tip and jamb nut Auxiliary contact assembly without compression spring Auxiliary contact assembly with O22S5 compression spring Compression spring for auxiliary contact assembly Comp. spring for arc deflector Auxiliary stationary contact Washer www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 235 Otis Replacement Relays/6754 Components O22C6 O22C1 O22C2 O22C3 O22C4 O22C5 O22C7 O22C8 O22C9 O22C10 MOVABLE & AUXILIARY CONTACT ARMS Adams Otis part no. part no. O22C1 153Z1 O22C2 O22C3 O22C4 150Y4, Y8 150C13, O22C5 150C14, 152AN2 Description Movable contact arm, 23/4”L Movable contact arm, 23/4”L; offset 3/32”; 3 /8” x 3/8” x 3/32” contact tip Movable contact arm, 23/4”L; 3/8”dia. silver contact Auxiliary contact, 7/16” x 13/16”; 1/4” dia. silver tip on 152AN1 outside surface of “L” Same as O22C4 with tip on inside surface of “L” 8 10 6 O22C12 O22C11 MOVABLE CONTACT ARMS, 2 3/4”L Adams part no. Otis part no. O22C6 O22C7 O22C8 O22C9 O22C10 O22C11 O22C12 153AE8 153Z4 150Y6 150Y7 153AE9 153AE10 153AE11 Silver contacts Side A Side B 7 /16” sq. silver none none 3 /8” dia. silver none 3 /8” dia. silver 3 /8” dia. silver 3 /32” offset none none 3 /8” dia. silver none 7 /16” sq. silver 7 /16” sq. silver 7 /16” sq. silver N Y Y Y Y N Y 9 7 1 2 O22B3 3 4 5 O22B1 CONTACTS, HOLDERS, CLAMPS Adams part no. O22D1 Otis part no. 154AB1 2 3 O22D2 O22D3 154AB2 150AL3 4 O22D5 153AE6 5 O22D4 150W6 6 7 8 9 10 O22K1 O22K2 O22K3 O22K3B O22K3X A179AK3 A336BR1 179AM1 306CP1 179AL2 Photo key 1 O22B2 Description Carbon contact w/5/32” mounting hole; 7 /16”x7/16”x29/32” Metal/graphite contact; same as above Copper contact w/ 3/8” dia. silver tip; 7 /16”x7/16”x13/16” Stationary copper contact w/7/16” sq. silver tip; 13/16”L Threaded contact w/silver tip; 3/8” dia. x 24 threads, 13/16”L Carbon holder for O22D1 & D2 Carbon clamp for O22K1 Stationary contact holder Insulator Holder for O22D4 threaded contact Fax: 1-847-581-2949 O22BA2 BASES & AUXILIARY CONTACT ASSEMBLIES Adams part no. O22B1 Otis part no. 306BR1 O22B2 O22B3 306CJ1 306BR2 O22BA1 O22BA2 6810A1 6810A3 • Description Bakelite base for O22C-series contacts; 1” x 7/16” x 31/16” Bakelite base for auxiliary contacts Red phenolic base for O22C-series offset contacts, O2210 relay Auxiliary contact assembly w/o compression spring Auxiliary contact assembly w/compression spring REPLACEMENT COILS H7606 H7602 236 O22BA1 US: 1-800-929-9247 • C6754 & E6754 COILS Adams part no. H7601 H7602 H7603 H7604 H7605 H7606 H7607 www.adamselevator.com Otis part no. 222EB1 222EB2 222EB3 222EB4 222EB5 222EB6 222EB7 Description 12890-36 10818-35 8820-34 6864-33 5546-32 4301-31 3595-30 Otis Replacement Relays/6754 Components 10 9 O22P1 11 8 5 4 6 7 O21P2 3 O22P3 2 O22J1 1 SPRINGS & CONNECTORS Photo key 1 2 3 4 5 6 7 8 9 10 11 Otis part no. Adams part no. O546B O521A O22S1 O22S2 O22S3 O22S4 O22S5 O22S6 O22S7 O22S8 O22S9 176KA13 175J88 90TA3 90VA16 90EB5 90BB19 90LA11 90YA25 90KB14 90VA15 90PA4 MISCELLANEOUS REPLACEMENT RELAY PARTS Spring O.D. Description Copper braid connector, 7”L 3 3/4”L silicone connector Compression spring Kickoff spring Compression spring Compression spring (make) Compression spring Compression spring Compression spring Compression spring Arc deflector spring 5 /16” /64” 15 /32” 5 /16” 1 /4” 21 /64” 1 /2” 5 /16” 17 /64” 21 Adams part no. O22P1 O21P2 O22P3 O22J1 Otis part no. A433Z1 99G1 99G2 6543C Description Panel Terminal stud, 13/8”L Terminal stud, 2”L Interlock 8 7 10 9 11 O22T1 O22W1 O22R1 O22W2 O21T1 2 1 3 4 5 6 MISCELLANEOUS REPLACEMENT RELAY PARTS Adams part no. O22R1 O22W1 O22W2 O21T1 O22T1 Otis part no. 141Y1 133A6 128H1 102DA1 464BJ2 MISCELLANEOUS REPLACEMENT RELAY PARTS Description 1”L rivet with cotter pin (not shown) Spring seat washer Washer I.D. tag Fiber separator, 31/8” x 5/8” 6754 COILS Photo key 1 2 Adams part no. O22H1 O22A2 Otis part no. 276H1 A245AE1 3 4 5 6 7 O22H2 O22A3 O22A4 O22A5 O22AM1 6534B1 384FS1 384EW2 A477BL1 B374CP1 Adams part no. Otis part no. Description 8 O22AM2 B245AE1 H6992 H6993 H6994 H6995 H7502 222CD1 222CD2 222CD3 222CD5 222CD4 13025-36 18025-35 4870-32 3675-30 7000-33 9 10 11 — O22AM3 O22AM4 O22AM5 O22N1 A384FS1 384EW3 129BR4 — H6993 Description Bakelite arc barrier Magnet armature; clapper dim.: 11/2” x 21/4” x 5/32” thick Arc deflector, complete Brass guard Fiber guard Stop Magnet core frame with 131AY1 magnet core washer Magnet armature; clapper dim.: 19/16” x 27/16” x 3/16” thick Brass guard Fiber guard Fiber washer for coil Nut for auxiliary contact (not shown) www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 237 Otis Replacement Relays/02200 Repair, Value Paks REPAIR PAK FOR ADAMS O2200 SWITCHES 16 13 11 12 14 4 5 10 9 6 3 1 8 7 2 15 Best use: Keep one or more Repair Pak at every job site ...and eliminate trips back to the warehouse. Adams part no. OK2220 Repair Pak. Contains items (1) thru (16). Photo key Adams part no. Otis part no. 1 2 3 4 5 6 O22A2 O22A3 O22B1 O22BA1 O22C1 O22C3 A245AE1 384FS1 306BR1 6810A1 153Z1 150Y4, Y8 7 8 9 10 O22C4 O22C5 O22D1 O22D4 150C13 150C14 154AB1 150W6 11 12 13 14 15 16 O22H1 O22H2 O22K1 O22K2 O546B OVP2205* 276H1 6534B1 179AK2 A336BR1 176KA13 — Description Quantity Armature Brass guard Movable contact base Auxiliary contact assembly Movable copper contact Movable copper contact with 3/8” dia. silver tip Stationary auxiliary contact Stationary auxiliary contact Stationary carbon contact Stationary threaded contact with 3/8” dia. silver tip Arc barrier Arc deflector Carbon holder Carbon clamp Connector, 63/8”L Assorted hardware & springs* 1 2 1 2 15 6 2 2 15 6 2 1 1 1 3 1 pkg *See below for description. VALUE PAKS FOR ADAMS O2200 SWITCHES O22D1 Each of the Paks described below features 10-250 each of the contacts and hardware you need most to repair Otis 6754-series switches. OVP2205 Hardware Pak. Incl. All parts listed to the right. Adams part no. O21P2 O22P3 O22R1 O22S1 O22S2 O22T1 O22W2 — Otis part no. 99G1 99G2 141Y1 90TA3 90VA16 464BJ2 128H1 — Description Qty. Terminal stud, 13/8”L Terminal stud, 2”L Rivet for O22S1, 11/8”L Compression spring Compression spring Fiber separator Washer #8-32 nuts 20 20 10 50 20 50 50 100 O22C1 Each Value Pak consists of 100 or 250 ea. of the following contacts: Adams Otis part no. part no. Description O22C1 O22D1 Movable copper, 2 3/4”L Stationary carbon 153Z1 154AB1 OVP2201 Value Pak. 100 of each. OVP2202 Value Pak. 250 of each. 238 Fax: 1-847-581-2949 • US: 1-800-929-9247 • www.adamselevator.com Otis Replacement Relays/Type 6830, Complete Adams Replacement Heavy-Duty O2300-Series Line Starter Switches O2301CV1 O2300CV1 Adams stocks DC magnet switches to replace the popular Otis E6830A, B & D models listed below. All switches are pre-fitted with coils. O2304CV1 To order, identify the Adams part no. on the cross-reference chart below. (You will find corresponding Otis part nos. in your Otis Service Manual and on the back of the Otis switch being replaced.) The chart also shows type and number of main contacts, auxiliary contacts, and whether the switch uses arc barriers or deflectors. E6830A, B & D RELAYS Adams part no. O2300CV1 O2300CV3 O2300CV4 O2301CV1 O2302CV1 O2302CV4 O2303CV1 O2304CV1 Otis part no. E6830A141CV1 E6830A141CV3 E6830A141CV4 E6830A142CV1 E6830A241CV1 E6830A241CV4 E6830B181CV1 E6830D200CV1 Adams coil no. H6989 H6991 H6997 H6989 H6989 H6997 H6989 H6989 Description† Main contacts Stationary 3 main MAKING 3 MAKING 2 BREAKING 2 BREAKING O23D1 O23D1 O23D1 O23D1 O23E1 O23E1 O23D1 O27C15 Movable O23C1 O23C1 O23C1 O23C1 O23C6 O23C6 O23C1 O23C4 Make/Break auxiliary contacts L&R L&R L&R L&R L&R L&R L&R* none Arc defl. Arc barrier ✓ ✓ ✓ ✓ ✓ ✓ ✓ † MAKING contacts are normally open and BREAKING contacts are normally closed. *Left side with reduced air gap. www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 239 Otis Replacement Relays/Type 6830 Components Type 6830 Magnet Switch Schematic 36 4 3 30 5 6 8 7 9 10 1 21 2 33 11 18 24 23 31 22 29 25 28 15 16 14 17 12 13 34 32 35 20 19 26 REPLACEMENT PARTS FOR OTIS TYPE 6830 RELAYS Adams part no. O23D1 O23D2 O23E1 Otis part no. 154C1 154C2 150AK3 O23E2 150AE5 2 O23K1X 179P2 3 4 5 6 O23K1 O23K2 O23H1 O23C1 O23C2 179P3 A336Z1 6313A1 153B1 — 7 O23C3 — 8 O23C4 150Y2, Y5 9 O23C5 153AE7 10 153AG6 O23C6 153AG6 150AK2 11 12 13 14 O23B1 O24C3 O23C7 O22C4 306CL1 93A2 93AD1 150C13 Key no. 1 240 37 27 Key no. Description Carbon contact Metal/graphite contact Copper contact with 1/2”-dia. silver contact (not shown) Copper contact with 5/8”-sq. silver contact (not shown) Carbon holder w/o screw, for blowout Carbon holder w/mounting screw Carbon clamp Arc deflector Contact arm w/o contact, 43/16”L Contact arm with 1/2”-sq. silver contact; 4 3/16”L Contact arm with 1/2”-dia. silver contact; 4 3/16”L Contact arm with 3/8”-dia. silver contact; 4 3/16”L Contact arm, 1/8” offset; 4 3/16”L; includes 5/8”-sq. copper contact Same as O23C5, w/o offset Contact arm with 1/2”-dia. silver contact, 1/8” offset; 4 3/16”L Base, 1” x 9/16” x 4 1/16”L Movable auxiliary contact arm Contact backing spring Stationary auxiliary contact Fax: 1-847-581-2949 • 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 US: 1-800-929-9247 O23A2 O23A3 O23A4 O23A1 Otis part no. 150C14 133A1 90DB4 141Y2 176KA10 175H1 175J150 A245AA1 384FX1 384EW1 A374FM2 O23A5 O23S3 O21P2 O22P3 O23P1 Hxxxx O21T1 O23A6 O22B2 O23T1 O23H2 O23BA1 A477BP1 90BB8 99G1 99G2 433AB1 222--102DA1 129BR3 306CJ1 464BJ3 276B1 6810A2 O23BA2 6810A5 Adams part no. O22C5 O23W1 O23S1 O23R1 O545B O530 • Description Stationary auxiliary contact Spring seat washer Compression spring Rivet, 11/8”L Copper braid connector, 7”L Connector (alternate), 71/2”L Silicone connector, 41/4”L Armature magnet Brass guard Fiber guard Magnet frame w/core plus 131BD1 washer Stop Compression spring Terminal stud, 13/8”L Terminal stud, 2”L Switch panel Coil (see coils, p. 226-227) I.D. tag Phenolic washer for coil Base for auxiliary contact Fiber separator Arc barrier Auxiliary contact assembly without coil spring Auxiliary contact assembly with coil spring (not shown) www.adamselevator.com Otis Replacement Relays/02300 Components VALUE PAKS FOR ADAMS O2300 MAGNET SWITCHES Each of the Paks described below features 100 or 250 each of the contacts needed most to repair Otis 6830-series switches. O23D1 Each Value Pak consists of 100 or 250 ea. of the following: Adams part no. Otis part no. 153B1 154C1 O23C1 O23D1 Description Movable contact arm Stationary carbon contact OVP2301 Value Pak, 100 pcs. of each. O23C1 OVP2302 Value Pak, 250 pcs. of each. O2300 COPPER CONTACTS (43/16”L) 7 1 2 3 4 5 Adams part no. O23C1 O23C2 O23C3 O23C4 O23C5 Otis part no. 153B1 — — 150Y2, 150Y5 153AE7 6 O23C6 150AK2 7 O23B1 306CL1 1 Adams part no. O23D1 Otis part no. 154C1 2 3 O23D2 O23E1 154C2 150AK3 4 O23E2 150AE5 5 6 O23K1X O23K1 179P2 179P3 7 O23K2 A336Z1 Key no. 1 2 3 4 5 6 Description Contact arm Contact arm w/1/2”-sq. silver contact Contact arm w/1/2”-dia. silver contact Contact arm w/ 3/8”-dia. silver contact Contact arm (1/8” offset) with 5/8”-sq. copper contact Contact arm (1/8” offset) with 1/2”-dia. silver contact Bakelite base for O23C-series contact arms; 1” x 9/16” x 41/16” CONTACTS, HOLDERS 5 Key no. 6 1 2 3 4 7 O23H1 Description Carbon contact with 3/16”-dia. mounting hole; 5/8” x 5/8” x 11/32”L Metal/graphite contact; 5/8” x 5/8” x 11/32”L Copper contact with 1/2”-dia. silver face; 5 /8” x 5/8” x 1”L Copper contact with 5/8”-sq. silver face; 5 /8” x 5/8” x 1”L Carbon holder w/o screw, for blowout Carbon holder with screw for O23D1, D2; 5/8” inside width for carbon/contact Carbon clamp for O23K1 AUXILIARY CONTACT ASSEMBLIES O22B2 O23H2 O23BA1 Adams part no. O23BA1 Otis part no. 6810A2 O23BA2 6810A5 O22B2 O23H1 O23H2 306CJ1 6313A1 276B1 Description Auxiliary contact assembly without coil spring Auxiliary contact assembly with coil spring (not shown) Bakelite base only for O23BA1 & BA2 Arc deflector, complete Arc barrier www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 241 Otis Replacement Relays/02300 Components MISCELLANEOUS O2300 REPLACEMENT PARTS O23A6 O23A5 O23A1 O23A2 Adams part no. O23A1 O23A2 O23A3 O23A4 O23A5 O23A6 O23P2 Otis part no. 374FM2 A245AA1 384FX1 384EW1 A477BP1 129BR3 — Description Magnet frame with core Magnet armature Brass guard Phenolic guard Stop Phenolic washer for coil Threaded stud, 23/8”L (not shown) O23A4 O23A3 CONTACTS FOR 6830 RELAYS Adams part no. O24C3 Otis part no. 93A2 O23C7 O22C4 93AD1 150C13 O22C5 150C14 O27C15 150W7 O27C15 O22C5 O22C4 O24C3 O23C7 O530 O23S1 O23S2 O23S3 O545B O23W1 Description Movable spring blade aux. contact arm; 23/4”L w/ 1/4” dia. silver contact Contact backing spring Stationary auxiliary contact with silver contact on outside of “L” Stationary auxiliary contact with silver contact on inside of “L” Contact holder assembly, 43/8”L. Includes 3 /8-16 x 2” threaded O22D4 silver contact (Otis no. 150W6); also use with O23E1 contact (Otis no. 150AK3); for E6830D magnet switch SHUNTS & SPRINGS FOR 6830 RELAYS Adams part no. O23W1 O23S1 O23S2 O23S3 O545B O530 Otis part no. 133A1 90DB4 90YA13 90BB8 176KA10 175H1 Description Spring seat washer Compression spring, 11/8”L x 1/2”OD Compression spring, 13/16”L x 1/2”OD Compression spring, 15/8”L x 9/16”OD Copper braid connector, 7”L Connector (alternate), 7 1/2”L MISC. PARTS FOR 6830 RELAYS O23P1 O22P3 O21P2 Adams part no. Otis part no. Description O21P2 O21T1 O22P3 O23P1 O23R1 O23T1 99G1 102DA1 99G2 433AB1 141Y2 464BJ3 Terminal stud, 13/8”L I.D. tag Terminal stud, 2”L Switch panel, 9 15/16”H x 5”W Rivet, 11/8”L Fiber separator, 3 3/4”L x 5/8”W O23R1 O23T1 O21T1 242 Fax: 1-847-581-2949 • US: 1-800-929-9247 • www.adamselevator.com Otis Replacement Relays/Other Relay Components TYPE 6164 RELAY* Key no. Adams part no. Otis part no. 4 5 6 7 See page 246 O24B1 O24B2 O520A O520B O521B O24C1 — 306LA1 306W1 175J1 175J2 175J89 150P7 8 O24C2 150P8 9 10 O24C3 O24S1 93A2 91B1 1 3 Description Magnet coil Base, 4 contacts Base, 2 contacts Fabric shunt, 4 3/4”L Fabric shunt, 2 1/2”L Silicone shunt, 43/4”L Stationary contact, 2 1/4”L Stationary contact, 3 1/64”L Movable aux. contact Extension spring 5 TYPE 6744A & B RELAY* Key no. 1 2 5 6 7 8 9 10 13 15 Adams Otis Description part no. part no. Magnet coil not available from Adams O544D 176KA8 Braided copper connector, 93/4”L O24C3 93A2 Movable auxiliary contact O23C7 93AD1 Leaf spring contact O22C4 150C13 Stationary auxiliary contact O22C5 150C14 Stationary auxiliary contact O26C1 153T1 Movable copper contact O26D1 154AA1 Carbon contact O26H1 6743A1 Arc deflector O23BA1 6810A2 Auxiliary contact ass’y. w/o coil spring TYPE 6163 RELAY* Key no. Adams part no. Otis part no. 1 2 3 See page 247 O530 O24C3 — 175H1 93A2 4 5 O23C1 O21C4 153B1 150P4 6 7 8 O23D1 O23H2 O23K1 154C1 276B1 179P3 Description Magnet coil Conductor, 71/2”L Movable auxiliary contact Copper contact Movable auxiliary contact Carbon contact Arc barrier Carbon holder TYPE 6520 RELAY* Key no. 1 2 3 4 5 6 8 Adams Otis part no. part no. Description Magnet coil not available from Adams O544B 175KA3 Copper shunt, 131/2”L O24C3 151A2 Movable auxiliary contact O21C4 150P4 Movable auxiliary contact O25D1 154G1 Carbon contact O25C1 153D1 Movable copper contact O25K1 179AD1 Carbon holder * These magnet switches are not available as complete units because the Otis configuration mounted these relays directly to a large slate panel. www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 243 Otis Replacement Relays/Miscellaneous O24C5 O671S O671B O24C4 O24C3 O669 O651 O24C2 O650 O24C1 6164 RELAY CONTACTS Adams part no. Otis part no. O24C1 150P7 O24C2 150P8 O24C3 151A2 O24C4 150P13 O24C5 150P14 CAR SWITCH CONTROLLER CONTACTS Description Adams part no. Otis part no. Description Contact arm with 1/4” dia. silver contact; 21/4”L Contact arm with 1/4” dia. silver contact; 31/64”L Spring blade with 1/4” dia. silver tip; 23/4”L Contact arm with 1/4” dia. silver contact; 23/4”L Contact arm with 1/4” dia. silver contact; 319/32”L O650 O651 O669 O671B O671S 1338 103243 1682 1763 1763 Type K car switch finger, 1/2” x 17/8”L Type G car switch finger, 1/2” x 2 1/2”L Brass contact, 1” x 2 5/8”L Door lock contact, brass; 1/2” x 2 1/8”L Door lock contact, steel; 1/2” x 2 1/8”L O26H1 O25K1 O26D1 O22C4 O25D1 O22C5 O26C1 O25C1 O2600 RELAY PARTS* O2500 RELAY PARTS* Adams part no. O25C1 O25D1 Otis part no. 153D1 154G1 O25K1 179AD1 Description Adams part no. Otis part no. Movable contact arm, 6 1/2”L Carbon contact with 5/16” dia. hole; 11/2” x 11/4” x 11/4” Carbon holder for O25D1; 17/16” x 17/16” x 5” O26C1 O22C4 O22C5 O26D1 153T1 150C13 150C14 154AA1 O26H1 6743A1 * These parts are for relays that are not pictured. 244 Fax: 1-847-581-2949 • Description Movable contact arm, 5 1/2”L Stationary auxiliary contact Stationary auxiliary contact Carbon/graphite contact, 5 /16” dia. hole; 11/4” x 1” x 1” Arc deflector US: 1-800-929-9247 • www.adamselevator.com Otis Replacement Relays/Miscellaneous O2700 RELAY COMPONENTS O27C14 O27C11 O27C6 O27C4 O27C4X O27C5 O27C12 O27C9 O27C1 O27C2 O27C8 O27C7 O27B1 O27C3 O27C10 O2700 RELAY PARTS Adams part no. O27C6 O27C7 O27B1 O27C8 O27C9 O27C10 O27C11 O27C12 Otis part no. 150H10 150P22 306CE1 150P23 150BA3 150BA4 150H4 150H6 O27C14 O27C1 O27C2 O27C3 O27C4 O27C4X 150W3 150C7 150C3 150C2 150HA2 150H2 O27C5 150HA3 Description Contact with double silver tip Contact for lower base “G” and “GA” contacts Base for upper contacts for “G” and “GA” contacts Contacts for O27B1 base; base w/contacts = Otis part no. 6759B1 assembly Contact arm with silver contact, 3/4”L; 10-32 thread Contact arm with silver contact, 9/32”L; 10-32 thread Stationary contact arm w/double 1/4” dia. silver contact; used on 6098 mechanical switch Double blade contact arm w/twin 1/4”-dia. silver contacts; 2 13/16”L x 5/16”W; used on 6401 throw-over switch Contact arm with 3/8-24 threaded silver contact (part no. O22D4); 5 1/4”L; used on 6163 magnet switch 1 /4”-dia. hex contact with silver contact; 31/4”L 5 /16”-dia. hex contact with silver contact; 11/8”L 5 /16”-dia. hex contact with silver contact; 3/4”L Leaf spring contact with 1/8”-dia. 2-sided silver contact; 23/4”L Same as O27C4, with 1/4”-dia. 2-sided silver contact used on 6098 mechanical switch and 6401 throw-over switch Leaf spring contact with 1/4”-dia. 2-sided silver contact and 1/8”-dia. contact on 1 side 15/16” from tip; 2 3/4”L www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 245 Otis Replacement Coils Adams Replacement Coils Adams stocks a large line of direct replacement coils for OEM models. Our stock consists of replacement coils for new Otis installations as well as coils for older Otis equipment. All 222 series Otis Coils are DC. H3303 H3302 H2154 H2112 H2158 A: SLIM LINE RELAYS Adams Otis part no. part no. 2-lead coils H2101 222FF1 H2105 222FF5 H2106 222FF6 H2107 222FF7 H2108 222FF8 H2109 222FF9 H2111 222FF11 H2112 222FF12 H2113 222FF13 4-lead coils H2154 222FD4 H2157 222FD7 H2158 222FD8 Description C: A6164 RELAYS Ω 10940-41 2736-35 860-29 12432-40 6420-37 9345-39 3192-34 4136-36 780-28 3379 200 15.8 3163 796 1849 194 394 11.5 Inner: 1776-40 Outer: 10064-40 Inner: 3204-39 Outer: 6942-39 Inner: 644-41 Outer: 9078-39 392 2800 575 1513 177 1915 B: 6204C1 REV. PHASE RELAYS Adams part no. H3301 H3302 H3303 246 Otis part no. 222CC1 222CC2 222CC3 Ω Description 1520-26, 110V/60Hz 1680-26, 110V/60Hz 1930-27, 110V/50Hz 21.25 24.9 34.5 Adams part no. H3754 H3756 H3757 H3759 Otis part no. 222DF4 222DF6 222DF7 222DF9 E: 6164 DC MAGNET SWITCHES Ω Description 1 24 /2-14 551/2-14 150 1/2-18 90 1/2-16 0.0139 0.0358 — 0.0937 D: A6164BP RELAYS (3-LEAD COILS) Adams Otis Description part no. part no. H5328 222CX1 15320-39; Tap at 14800 H5329 222CX2 15320-39; Tap at 8980 6164 Relays H5371 222Z1 10335-37; Tap at 8090 H5373 222Z3 8115-36; Tap at 7410 H5374 222Z4 6360-35; Tap at 6065 H5375 222Z5 12750-38; Tap at 11960 H5378 222Z8 10515-37; Tap at 10165 6164BP Relays (2-lead coils) H5317 222CY1 15310-39 H5318 222CY2 10664-37 H5319 222CY3 3996-33 H5320 222CY4 1890-29 H7582 222CY5 884-26 H7505 222CY6 94-18E H7507 222CY7 5470-38 H7585 222CY8 430-23 H7587 222CY10 5576-34 H7588 222CY11 8352-37 Fax: 1-847-581-2949 • US: 1-800-929-9247 • Adams part no. H4615 H4620 H4622 H4623 H4624 H4629 H4631 H4632 H4633 H4634 H4635 H4751 H4753 H4755 H7101 H7104 H7108 H7109 H7110 H7111 H7112 H7114 H7115 H7116 H7117 H7118 H7119 Otis part no. 222E15 222E20 222E22 222E23 222E24 222E29 222E30 222E31 222E17 222E16 222E32 222FA1 222FA3 222FA5 222W1 222W4 222W8 222W9 222W10 222W11 222W12 222W14 222W15 222W16 222W17 222W18 222W19 www.adamselevator.com Description 950-27 1700-29 2150-30 2350-31 2600-31 4500-34 5000-34 5600-35 1190-28 1050-27 6200-35 70-15 100-17 170-19 244-20 474-23 1090-27 1446-28 1785-29 2188-30 2806-31 4120-33 5256-34 6685-35 8140-36 9600-37 12830-38 Ω 11.6 34.1 54.0 73.0 83.0 278.0 320.0 437.0 18.3 13.2 500.0 0.0545 0.123 0.337 — 2.36 13.74 23.0 35.8 55.4 89.50 209.3 336.5 539 826 1329 2070 Otis Replacement Coils ADAMS QUALITY BOBBIN-WOUND COILS Adams stocks 2-, 3-, and 4-lead bobbin-wound replacement coils. Bobbins are green-colored glass-filled Lexan®, and conform faithfully to the appearance and physical dimensions of the Otis originals. Generally used in the Otis Type A6164BP DC Magnet Switches. (Coil no. H5317 is also used with Otis Type 6993D3 and D4 safety edges.) Shown below are some of the bobbin-wound coils we carry. Order from charts below. J: 6164 RELAYS Adams Otis part no. part no. H7704 222T4 H7705 222T5 H7708 222T8 A6164 Relays H7500 222CZ3 H7501 222CZ1 H7503 222CZ2 H7504 222CZ4 H4639 H4638 H7555 H6017 222CZ5 Description 4830-34 tap 4100 11875-38 tap 10025 12037-38 tap 5775 15320-39 tap 14800 15320-39 tap 8980 10490-37 tap 7560 Inner 8000-37 Outer 70-21 10200-37 tap 5100 K: 6850 BL PAWL MAGNET F: 6163 DC MAGNET SWITCHES Adams part no. H4708 H4710 H4711 H4712 H4713 H4714 H4715 H4717 Otis part no. 222F8 222F10 222F11 222F12 222F13 222F14 222F15 222F17 Description Ω 2745-27 4020-29 5240-30 6255-31 7995-32 9905-33 12785-34 19150-36 51.35 115.3 196 310 476 745 1210 2885 Otis part no. 222CD1 222CD2 222CD3 222CD5 222CD4 Ω Description 13025-36 10825-35 4870-32 3675-30 7000-33 1690 1118 241.5 119 455 OTIS 20S LATCHING/RESET RELAY (NOT SHOWN) Adams part no. H7506 Otis part no. 178721 Description 1700-31 Lexan—Reg. TM General Electric Company Adams part no. H7601 H7602 H7603 H7604 H7605 H7606 H7607 Otis part no. 222EB1 222EB2 222EB3 222EB4 222EB5 222EB6 222EB7 Description 12890-36 10818-35 8820-34 6864-33 5546-32 4301-31 3595-30 Ω 1860 1230 800 495 316 201 129 I: E6830 DC MAGNET SWITCHES G: 6754, A6754 & B6754 DC MAGNET SWITCHES Adams part no. H6992 H6993 H6994 H6995 H7502 H: E6754 DC MAGNET SWITCHES Adams part no. H6989 H6990 H6991 H6996 H6997 Other H4011 H7515 H7517 H7519 H7520 H7521 H7531 Otis part no. 222CV1 222CV2 222CV3 222CV6 222CV4 222AA11 222G15 222G17 222G19 222G20 222G21 222G31 Description 13725-34 5670-30 11020-33 7300-31 7200-31 6555-30 1520-26 1930-27 2480-28 2770-28 3060-29 9220-34 Ω 1410 231 900 375 375 21.25 34.5 55.0 65.2 86 826 Adams part no. H3701 Otis part no. 222DE1 Description Inner 7660-32, 477Ω Outer 1350-32, 108Ω L: 0-S MAGNET SWITCHES BOBBIN SIZE: 1 7/8” OD X 111/16”L) Adams part no. H4638 H4639 H4640 H4643 H4644 H6017 H7061 H7351 H8130 Otis part no. 103590 103593 103594 103588 150071 114536 146123 103596 103601 Description 450-22 600-23 660-24 375-21 2430-30 3000-32 4520-33 800-25 1290-27 M: 1-S MAGNET SWITCHES (BOBBIN SIZE: 21/2” OD X 21/4”L) Adams part no. H4641 H5666 H7305 H8453 Otis part no. 13475 13474 13470 136228 Description 2180-27 1980-26 1350-24 6450-29 N: 2-S/2-SA MAGNET SWITCHES (BOBBIN SIZE: 3 1/2” OD X 31/4”L) Adams part no. H6283 H6286 H6287 www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 Otis part no. 12941 12948 12934 Description 1366-20 2660-24 700-17 247 Otis Selector Parts Replacement Parts for Otis Selectors Adams stocks hundreds of replacement parts for Otis selectors. Our product line includes selector tape (perforated & unperforated), brush switches, rotary cams, advancer panel contacts (movable & stationary), relays, contacts, shunts, coils, rectifiers, and more. The illustrations on these two pages show Type 140-M Selector Type 6104AY Selector Description O24C3 O27C2 O27C3 O301 Movable spring contact Contact (see page 225) Contact (see page 225) Selector tape, unperforated O339A O339B O339C O340 O342 O520C O520D O520E O520F Selector brush Selector brush Brush bracket Contact Floor bar contact Fabric shunt, 7 1/4”L Fabric shunt, 2 1/2”L Fabric shunt, 3 1/2”L Fabric shunt, 3 3/4”L 248 Type 6850DK Selector TYPE 6850DK SELECTOR TYPE 6104AY SELECTOR TYPE 140-M SELECTOR Adams part no. principal types of Otis selectors and a list of replacement parts available for each. Otis part no. 93A2 150C3 150C2 297B2/ plain 181893 181894 181892 181874 A152H2 175J3 175J4 175J5 175J6 Adams part no. O23S2 O24C3 O27C2 O27C3 O300 Description Compression spring Movable spring contact Contact (see page 225) Contact (see page 225) Selector tape, perforated Brush switch Double brush switch Brush switch Brush switch Contact brush Contact brush Contact brush Switch brush Switch brush Floor bar contact Floor bar contact Contact base Contact w/fiber cam Contact blade U-form cam, 5/8”W U-form cam, 7/16”W Door zone switch Auxiliary stopping switch Fabric shunt, 7 1/4”L Fabric shunt, 2 1/2”L Fabric shunt, 3 1/2”L Fabric shunt, 3 3/4”L Carbon brush O325A O325J O325W O329 O330 O331 O333 O334 O335 O343 O344 O344B O350 O351 O354A O354B O370 O375 O520C O520D O520E O520F O763 Fax: 1-847-581-2949 • Otis part no. 90YA13 92A2 150C3 150C2 297B1/ perf. 6839B3 6839J1 6839W1 177AH1 A6839F3 A6839F4 A6839F2 6839Y1, Y3 6839Y2, Y4 156E1, 2, 3 156G4 306GD1 150P31 150P32 152AX4 152AX2 6809C1 6104AR1 175J3 175J4 175J5 175J6 186142 US: 1-800-929-9247 • Adams part no. O23S2 O23W1 O29A-series* O29C-series* O295P-series** O300 O320B O321B O322A O322B O325C O326 O327 O327A O327B O329 O331 O335 O343 O344B O345 O346 H2100*** H2150*** H6996 Description Compression spring Spring seat washer Normal relay Self-holding relay Pile-up, Make/Break Selector tape, perf. Long-blade brush Long-arm door zone contact Short-arm level. sw. Long-arm level. sw. Brush switch Plunger brush Cam/clamp ass’y. Sel. switch cam Sel. switch clamp Brush switch Contact brush Switch brush Floor bar contact Base Carbon-tipped contact Contact Coil Coil Coil *Specify Normal/Self-hold, MAKE/BREAK **Specify MAKE/BREAK combination(s). ***See Slim Line Relay coils (2-lead and 4-lead) for complete part numbers for these coils. www.adamselevator.com Otis part no. 90YA13 133A1 7058B 7058B 7055C 297B1 6839D2 A6839E2 A6839G1 A6938G3 6839B4 6482C2 6827C1 327FT2 336CM1 177AH1 A6839F4 6849Y4 156E3 306GD1 A151C2 156AV2 222FF 222FD 222CV6 Otis Selector Parts Type 6850BJ Selector Type 6850CA Selector TYPE 6850CA SELECTOR† Adams part no. O2100-series** O23S2 O23W1 O300 O320A O320B O320C O321A O321B O322A O322B O323 O324 O325A O325B O325C O326 O327 O327A O327B O328 O330 O331 O332 O333 O344 O344B O362 O801C1 H5328 Description Self-holding relay Compress. spring Spring seat washer Selector tape, perf. Short-blade brush Long-blade brush Copper finger indicator Door zone cont., sh. Door zone cont., l. Level. sw., short Level. sw., long Selector contact Selector contact Switch, silver cont. Switch, graph. cont. Switch, fiber cam Plunger Cam/clamp ass’y. Cam Clamp Cam Brush w/carbon Brush w/graphite Brush w/fiber Brush w/carbon Floor bar contact Base Cam on bracket Retaining ring (10pk) Coil †Also used on models CK, C, BV **Specify MAKE/BREAK combination(s). TYPE 6850BJ SELECTOR Otis part no. Adams part no. Description Otis part no. A6164BP 90YA13 133A1 297B1 6839D1 6839D2 O2100-series O21C4 O21C5 O23C7 O23S2 O23W1 O24C3 O24S1 O300 O320A O320B O321A O321B O322A O322B O325B O325W O327 O327A O327B O330 O333 O333CY O333Y O334 O335 O343 O344 O344B O350 O351 O352 Self-holding relay** Movable contact Leaf spring contact Contact back. spring Compression spring Spring seat washer Movable contact Extension spring Selector tape, perf. Cont. brush, short Cont. brush, long Door zone cont., sh. Door zone cont., long Level. switch, short Level. switch, long Brush switch, graph. Brush switch Cam/clamp ass’y. Cam Clamp Contact brush Contact brush, carb. Cam w/silver contact Rocking contact Switch brush, fiber Switch brush, carbon Floor bar contact Floor bar contact Base Contact w/fibre Contact blade Spring blade A6164BP 150P4 93D2 93AD1 90YA13 133A1 93A2 91B1 297B1 6839D1 6839D2 A6839E1 A6839E2 A6839G1 A6839G3 6839B2 6839W1 6827C1 327FT2 336CM1 A6839F3 A6839F2 327JE2 6839AB1 6839Y3 6839Y4 156E3 156G4 306GD1 150P31 150P32 93CC1 269R1 A6839E1 A6839E2 A6839G1 A6839G3 6850F1 6850F2 6839B3 6839B2 6839B4 6482C2 6827C1 327FT2 336CM1 327DE2 A6839F3 A6839F4 A6839F5 A6839F2 156G4 306GD1 327GS1 172DE9 222CX1 TYPE 6850BJ SELECTOR (CONT.) Adams part no. O354B O355 O357 O358 O361 O363 O364 O763 O807 O833 H3701 H5328 R065 Description U-form cam, 7/16”W Toggle p.i. switch Magnet pawl contact Magnet pawl contact Toggle cam Down stop contact Up stop contact Carbon brush Compression spring 2-pc. cam/clamp Coil Coil Rectifier www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 Otis part no. 152AX2 7042A1 150P33 150P34 327GJ1 156H1 156H2 186142 90HB9 327DJ2C 222DE1 222CX1 230AY3 249 Otis Selector Parts/Selector Tape Adams selector tape: an industry standard Adams raw stock is mill certified to these specifications: 12 pe SELECTOR TAPE ORDERING INFO rfora • Steel must be tempered, polished, and blued Adams part no. O300 O301 O302 tion p • Tape edges must be round and smooth • Width must be held to ±0.005" and thickness to ±0.0005" of specs er ft. O300 • Flatness and straightness shall be guaranteed by the mill O301 Adams Selector Tape Product Specifications: O300 SERIES AVAILABLE IN PRE-CUT STOCKED LENGTHS • Perf progression (over 27 teeth) shall not deviate more than ±0.0045" • Length of perforation: ±0.002" Description 1"-wide spring steel, perforated 1"-wide spring steel, unperforated 3 /4"-wide spring steel, unperforated Adams 1” wide spring steel, perforated part no. O300-250 250’ per Spool O300-300 300’ per Spool O300-400 400’ per Spool O300-500 500’ per Spool O300-800 800’ per Spool O300-1000 1000’ per Spool O300-1500 1500’ per Spool O300-3500 3500’ per Spool Other sizes available on special order only. O302 • Width of perforation: ±0.005" • Perf centers: ±0.005" • Distance between perfs: ±0.002" • Radius of perf: ±0.001° (typical) • Contours of perforations must be smooth, continuous, and free from cuts and nicks • Pitch: ±0.0002" ALSO AVAILABLE... 385NN1 Otis Tape Guide, Hoistway, 14” x 1.25” x .75” (3) .2215” holes, (4) grooves 250 385PD1 Otis Tape Guide Fax: 1-847-581-2949 • 6199H1 Otis Selector Tape Hitch Assy US: 1-800-929-9247 • www.adamselevator.com Otis Selector Parts/Miscellaneous FLOOR SELECTOR PARTS Adams part no. O310G O310C O311 O310G O311 O310C Otis part no. Description Floor selector roller, metal/ graphite; 1/2" x 1/2", 0.251" ID Floor selector roller, copper; 1/2" x 1/2", 0.251" ID Floor selector finger; use with O310G & O310C 1659 15387 102990 CONTACTS, CONTACT BRUSHES, INDICATOR Adams part no. O312 O320B O320A O313 O320C O320A O320B O313 O312 O320C Otis part no. Short contact arm, 3/8" x 2"; 154AD2, for O320A brushes AD7 Long contact arm, 3/8" x 21/2" 154AD4, for O320B brushes AD8 Contact brush (incl. O312 6839D1, short contact arm) D3 Contact brush (incl. O313 6839D2, long contact arm D4 Indicator with finger 269R1 Description DOOR ZONE ASSEMBLIES O321A O314 Adams part no. O314 O321B O315 O321A O315 O321B Otis part no. Description Movable contact for 6839E door zone assembly; incl. short cam arm, 2 1/4"L Movable contact for 6839E door zone assembly; incl. long cam arm, 2 3/4"L Door zone assembly with O314 short cam arm Door zone assembly with O315 long cam arm 150P37 150P41 A6839E1 A6839E2 SWITCHES & CONTACT ARMS O375 O370 O355 Adams part no. O355 O363 O370S1 Adams part no. O370 O370S1 O375 Description Door zone switch for 6104AY selector Compression spring for O370 Auxiliary stopping switch for 6104AY selector Otis part no. 6809C1 90GA2 O364 O365 O363 O364 Description Toggle switch for position indicator Upper stop control contact arm for 6851B stop control switch Lower stop control contact arm for 6851B stop control switch Contact finger and spring guide O365 Otis part no. 7042A1 156H1 156H2 156AB2 ML6101AR1 www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 251 Otis Selector Parts/Contacts SWITCHES & CONTACTS 2 1 Photo Adams key no. part no. 1 O342 4 3 5 2 O344B 3 4 O346 O347 5 O350 6 7 8 O351 O352 O353 7 8 6 Otis part no. Description Contact for floor bar ass'y.; head = 3/8" x 5/8"; 2 11/32"L, #10-32 thread Contact base for floor bar ass'y.; accommodates 3 contacts Selector contact, 11/2"L, round hex nut Selector contact, 2 1/2"L; 3/8" x 3/4" contact face with 3/4" radius Contact for selector stopping switch, with fiber cam; 3/8" x 3 1/8" blade, 1/4" tip; also used on 6970A door operator Contact blade, makes with O350 Spring blade for O330-type contact brush Selector contact B152H2 306GD1 156AV2 — 150P31 150P32 93CC1 156A6 SWITCHES & CONTACTS Photo Adams key no. part no. 9 O354A 10 O354B 11 O357 12 O358 13 14 O361 O362 9 Otis part no. Description U-form selector cam for rocking contact; 5/8" inside width U-form selector cam for rocking contact; 7 /16" inside width Pawl magnet contact for crosshead panel, 15/8"L Pawl magnet contact for crosshead panel, 11/2"L Toggle cam for advancer panel Bracket/cam assembly; used at end of crosshead panel 10 11 152AX4 152AX2 13 12 150P33 150P34 327GJ1 14 327GS1 CAM & CLAMP ASSEMBLIES O327A O833A O327 O328 O833 O327B O833B Adams part no. O833 O833A O833B 252 Otis part no. Description Cam & clamp ass'y. for power door operator switches and 6850 selector; replaces 327DJ2 one-piece unit Plastic cam for O833; upper surface radius = 11/8"; lower surface radius = 15/16" Die cast cam clamp Adams part no. O327 O327A O327B 327DJ2C Otis part no. 6827C1 327FT2 Description Cam/clamp assembly Cam only Cam clamp (also used on O328 cam) Adams part no. O328 Description Cam for selector switches; use O327B clamp 336CM1 — — Fax: 1-847-581-2949 • US: 1-800-929-9247 • www.adamselevator.com Otis part no. 327DE2 Otis Selector Parts/Switches & Contacts SWITCHES & CONTACTS 2 Photo key no. 1 2 3 4 1 8 7 5 3 Adams part no. O322A O322B O323 O343 5 6 O324 O344 7 8 O326 O345 6 4 Description Leveling switch with 2 1/4" contact arm Leveling switch with 23/4" contact arm Selector contact Contact only for O323 assembly; 111/32"L, #8-32 threads Selector contact, cadmium plated Floor bar contact for O324 group; 11/2"L, #8-32 threads Plunger brush Carbon-tipped contact for O326 assembly; 23/4"L, #8-32 threads Otis part no. A6839G1 A6839G3 6850F1 156E1, 2, 3 6850F2 156G4 6482C2 A151C2 SWITCHES & CONTACTS 9 10 12 11 16 13 Photo key no. 9 10 Adams part no. O325H O325J 11 12 13 14 15 16 O520B O325W O325A O325B O325C O329 Description Brush switch Double brush switch assembly with fiber cams and connecting shunt Shunt for O325J, 2 1/2" long Brush switch Brush switch w/silver contact Brush switch w/graphite contact Brush switch w/fiber insulator tip Brush switch Otis part no. 6839H1 6839J1 175J2 6839W1 6839B3 6839B2 6839B4 177AH1 15 14 SWITCHES & CONTACTS Photo Adams key no. part no. 17 O330 18 O331 19 O332 O330C2 20 21 O333 20 22 23 24 22 21 18 19 17 23 27 Photo Adams key no. part no. 25 O334 29 28 31 32 Contact brush w/carbon contact, 7/16"L Metal graphite contact, 7/16"L Contact brush w/fiber contact, 7/16"L Carbon & clip assembly Contact brush for crosshead panel; 7 /8"L carbon contact (#156D2) Carbon & clip assembly Rocking contact brush assembly, complete Cam with silver contact for O333Y ass’y. Otis part no. A6839F3 A6839F4 A6839F5 156J2 A6839F2 156D2 6839AB1 327JE2 24 26 25 O333C5 O333Y O333CY Description 26 O335 27 28 O336 O339A 29 O339B 30 31 O339C O340 30 32 O341 Description Brush switch for crosshead and advancer panels; includes 7/16"L fiber insulated tip Brush switch for crosshead and advancer panels; 7/16"L carbon contact Stationary contact for brush switch Selector brush for ML6104 crosshead and brush advancer panels, and 140M selector; 5/8"L graphite contact Same as no. O339A, but with 15/16"L graphite contact Bracket only for O339A & O339B Selector contact for floor bar ass'y.; 5 /16" dia. hex head with 3/16" dia. silver contact; 2 5/16"L with #10-32 thread Selector contact for floor bar ass'y.; 3 /8" dia. hex head with 3/16" dia. silver contact; 15/16"L with #10-32 thread www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 Otis part no. 6839Y1, Y3 6839Y2, Y4 150BA7 181893 181894 181892 150R1, 181874 150C10 253 Otis Contacts/Miscellaneous ....MORE CONTACTS AVAILABLE FOR OTIS EQUIPMENT. 126391 Otis Contact 106580 Otis Contact Assy. 109731 Otis Contact Assy. 120671 Otis Contact Assy. 12143 Otis Contact Holder 6825B3 Otis Contact 129912 Otis Contact Assy. 130409 Otis Contact Holder 1329 Otis Contact, Brass 13418 Otis Contact, Assy. 156AX1 Otis Contact, U form 145706 Otis Contact 146088 Otis Contact 130190 Otis Contact 150AY1 Otis Contact, Stationary 1338 Otis Contact 150C4 Otis Contact 153H1 Otis Contact 153Y1 Otis Contact 156AA2 Otis Contact 153AG6 Otis Paddle Contact 169941 Otis Carbon Contact 6850F3 Otis Contact 12171 Otis Contact Assy LH 12170 Otis Contact 254 Fax: 1-847-581-2949 • US: 1-800-929-9247 • www.adamselevator.com Otis Rollers/Introduction Three types of polyurethane guide rollers to choose from • SPx80™ Quiet Soft Poly gives you the quiet ride of rubber, PLUS: • Tougher resistance to chemicals & ozone • Longer life • HDx95™ Heavy-Duty poly outlasts conventional guide rollers where noise reduction is not a major concern • LFx70™ Low-Friction, super-hard poly • Adams guide rollers address rigid elevator operating requirements • Get the quality ride you demand • Minimize roller-related call-back’s…add perceived value to your service • Adams Durabond® polyurethane is the industry's toughest • Precision-machined and balanced hubs promote wobble-free ride • Every batch is tested for proper composition • Temperatures are recorded at all steps in the manufacturing process • Machined rollers have 100% inspection of bore • Concentricity and final dimensions are held tightly • Final durometer is checked in each batch COLOR KEY FOR ADAMS POLY O401 Red = LFx80 Low Friction Black = SPx80 Soft Clear = HDx95 Heavy Duty www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 255 Otis Hanger Rollers O401A1 Adams’ unique convex polyurethane contour on our O401 rollers gives superior performance over conventional concave designs O403XCM O404 O404P O403XFM O403x O401 Adams part no. O401 O401HP O401A1 O401X O402 O402HP O403 O403X O403XCM O403XFM O404 O404HP O404P 256 O401X O402 Roller dimensions Description Hanger roller with convex surface; for type AU & 6178A flat track hangers Same as O401, with low-friction hard poly Teeter-bar hanger w/2 O401 rollers and 1 O410 up-thrust roller; for heavy doors Hanger roller with convex tire surface; for Type “A” (6178A) hangers Hanger roller for AU & 6178A hangers; concave roller surface Same as O402, with low-friction hard poly 11 Hanger roller with /32" radius on concave surface Hanger roller w/eccentric axle stud, steel hub Hanger roller, projection welded; eccentric axle has 1/2"-20 thread and 3/16" socket, machined hub Hanger roller, projection welded; eccentric axle has 1/2"-20 thread and 3/16" socket, machined hub All-steel hanger roller for integral hoistway hanger Same as O404, with low-friction hard poly tire Same as O404, with heavy-duty poly tire Fax: 1-847-581-2949 • O403 Materials Diam. Thick. 3 1/4" 11 /16" 3 1/4" 11 /16" 3 1/4" 11 /16" Bearing I.D. 0.500" (bushed) 0.500" (bushed) 0.500" (bushed) 3 1/4" 11 /16" 0.9843" 3 1/4" 11 /16" 0.500" 3 1/4" 3 3/8" 33/8" 33/8" 11 /16" /16" 13 /16" 13 /16" 0.500" 0.7874" n/a n/a Hub Solid steel Solid steel Solid steel Solid steel Solid steel Solid steel Sol. steel Sol. steel machined 3 3/8" 2 3/4" 23/4" 23/4" 3 n/a 0.785" 0.785" 0.785" machined Steel Steel Steel 13 /4" /16" 11 /16" 11 /16" 11 US: 1-800-929-9247 • Tire HDx95™ poly LFx70™ poly HDx95™ poly HDx95™ poly HDx95™ poly LFx70™ poly HDx95™ HDx95™ HDx95™ poly HDx95™ poly Steel LFx70™ HDx95™ www.adamselevator.com Otis part no. A456W1 A456W1 368203907 456W1 A456EA1 A456EA1 456CX4 456DH1 456DH2 456EW1 456CC1 456CC1 456CC1 Otis Upthrust Rollers O419 O417 O408X Adams part no. O408X Description O418 O409 O410 Dimensions Diam. Thick. O417 Upthrust roller with all-steel roller surface for integral hanger & track; eccentric axle has 1/2" shoulder; includes hex jamb nut Upthrust roller with steel roller surface for integral track; eccentric axle has 1/4" shoulder; includes hex jamb nut Upthrust roller with steel roller surface; eccentric axle has 1/8" shoulder; incl. nut Roller guide wheel with convex poly tire O418 Roller guide wheel with 5/16" flat poly tire face 2.200" 7 O419 Roller guide wheel with 3/8" flat poly face; 11/4"L eccentric axle has 1/2-13 thread; can be used for Otis and Dover hydros 3" 13 O409 O410 Materials Bearing I.D. Hub Tire Otis part no. 13/8" 1 n/a Steel Steel 456CP1 13/8" 1 n/a Steel Steel 456CP2 13/8" 2.200" 7 n/a 0.370" Steel Steel 0.370 Steel Steel HDx95™ poly HDx95™ poly 207Z4 6263A1 456CA1A 6263A2 456CA2B n/a Steel HDx95™ poly 456DN1 /2" /2" /16" /8" 7 /8" /16" www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 257 Otis Guide Roller “S” in part nos. is your key to the quietestrunning polyurethane guide rollers around! O420S O420 O425 O421S O421 Permanent Lube! O423 O423S Permanent Lube! NOTE: O421 and O423 are same size. Perspective of picture has distorted size. O422S Adams part no. O420S O420 O421S O421 O422S O422 O423S O423 O424S O424P O425 O421X bolt & bushing Dimensions Dia. Width Description Roller guide wheel with axle shaft for 6261A roller guide assembly Roller guide wheel for 6261C roller guide assembly, 1941 thru 1962; permanent lube Guide roller with axle shaft, for 6261P roller guide assembly; w/pump shaft bearing Roller guide wheel w/axle shaft; used on 6261C guide assy, after Dec 62; perm. lube Roller guide wheel with axle shaft enclosed by pump shaft bearing; used for 6261H roller guide assembly Roller guide wheel with axle shaft enclosed by pump shaft bearing; used on 6261T roller guide assembly Fax: 1-847-581-2949 • Tire SPx80™ HDx95™ SPx80™ HDx95™ SPx80™ HDx95™ SPx80™ HDx95™ SPx80™ Rubber HDx95™ 456AK2-SV 456AK2 456AJ2 -SV 456AJ2 456CN4-SV 456CN4 456CL4-SV 456CL4 456CM4-SV 456CM4 456CM4 Rubber 456CV4 11/8" Aluminum 77/8" 11/2" 33/4" 1" 77/8" 11/2" 47/8" 11/8" Die-cast aluminum Die-cast aluminum Die-cast aluminum Die-cast aluminum 10" 11/2" Die-cast aluminum US: 1-800-929-9247 Otis part no. Hub 33/4" O421X. Lever arm bolt & bushing for O421 and O423 guide rollers; hardened steel bushing with hardened cold-rolled steel pin. 3" long, with shaft diameter of 3/4" See photo inset, above. Replaces Otis part nos. 59P1 and 335H1. Bushing has an Outside Diameter of 1.002". 258 Materials COLOR KEY FOR ADAMS POLY Red = LFx80 Low Friction Black = SPx80 Soft Clear = HDx95 Heavy Duty • www.adamselevator.com Otis Rollers QUIET POLY: AN ADAMS EXCLUSIVE O441 They give you the quiet ride you enjoy with rubber PLUS these added advantages: O426 • Quiet Poly guide rollers last longer than rubber (SPx80™ Quiet Poly) • Stand up to petroleum products that invade hoistway and reduce roller life • Resist ozone degradation Try a Quiet Poly alternative next time you are replacing a guide roller. O443 O822R1 O822R2 COLOR KEY FOR ADAMS POLY O444 Adams part no. . O426 Red = LFx80 Low Friction Black = SPx80 Soft Clear = HDx95 Heavy Duty Dimensions Description Diam. Chain pulley roller for A6037E1, E2 hangers O443 O444 O822R1 O822R2 Roller for “N1” and “N2” hatchway limit switch; 3/4" tire face Roller for 6072A stopping switch, heavy duty; stamped steel hub, poly tire, precision ball bearing Door guide roller; add 1/16" to diam. for elastomer ring; 1/16" extension with 6-32 tapped hole; 9/16"L. Fits 7593B door guide. Rubber roller, 0.593" wide Same as O822R1 with 335D4 bushing 23/8" 3" 31 /64" 1.22" 1.22" Tire Otis part no. Steel Steel 290B1 /2" Steel Rubber 101876 n/a Steel SPx80™ A6037D1 6-32 tapped hole 0.337" 0.337" n/a n/a Bronze n/a Rubber Rubber 456DD1 456AA1 456AA2 19 /32"; /8" bushing I.D. 1 456EW2 Otis Hanger Roller 456AK4 Otis Soft Rubber Roller includes Pin, Ball Bearings and Ring 456C5 Otis Soft Rubber Roller 456CE4 Otis Door Operator Roller 456By1 Otis Limit Switch Roller 31/2" Hub Bearing ID 3 O441 Materials MISC. OTIS ROLLERS Part No. 456AK4 456C5 456CE4 456EW2 456BY1 O.D. 3.75” 1.49” 2.00” 3.00” 1.62” Width .97” 1.28” 0.56” .89” .78” www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 Where Used w/6261A Roller Guides A7116B, 7078B, A7078B A6970F1 & A6970F2 Hanger Roller 6098FH, 6098B Limit Switch 259 Otis Survivor O®/Crossfire/Car. Survivor O® Mechanical Alternative to Touch Buttons INSTALLATION WHITE Module 2040 Main Car Panel Floor Call Button #1 SCHEMATIC FROM TERMINAL 3 TO CB+ COMMON OF OTHER SWITCHES BLACK BLUE RED 24CSB BULB (A-487L9), OR 24-28V LED [A-494LR3 (red) & A-494LW3 (white)] 3300Ω5W FLOOR WIRE FROM TERMINAL C (USE AS TERMINAL ONLY) CB0 COMMON TO RESISTORS (TERMINAL 4) Adams O-486E Modules and mechanical buttons are suitable replacements for Otis 2040 tubes and Touch Buttons. A wiring modification is required to retain cross-firing in main and auxiliary car panels. For cross-firing with an auxiliary panel, you must connect together the blue wires of the corresponding buttons, Main Fl. #1 button to Aux. Fl. #1, etc. (see schematic diagram at left). 1) Wires on terminal 5 are no longer used. 2) ALL car switches must be replaced at the time of change. 3) It may be necessary to stud existing panels. 4) Use terminal 4 as a terminal only, not as part of switch; no bridging contact inside switch at this position. See illustration below. 5) Use 3300 OHM resistor from old car station; it was connected from terminal 4 to terminal C. Or, use a new 3300 OHM/3-5W resistor. WHITE Module 2040 Aux Panel Floor Call Button #1 6) Terminal for 3300 OHM resistor is for car unit only. FROM TERMINAL 3 TO CB+ COMMON OF OTHER SWITCHES BLACK CONNECTION BETWEEN BLUE WIRES OF CORRESPONDING BUTTONS FOR CROSS-FIRING BLUE RED 24CSB BULB (A-487L9), OR 24-28V LED [A-494LR3 (red) & A-494LW3 (white)] 3300Ω5W FLOOR WIRE FROM TERMINAL C (USE AS TERMINAL ONLY) CB0 COMMON TO RESISTORS (TERMINAL 4) FROM TERM. 3 TO CB+ COMMON OF OTHER SWITCHES JUMPER BLACK TERMINAL 4 FLOOR WIRE FROM TERMINAL C Note: In a COP, all buttons must be changed out at the same time for proper operation. Hall stations can be replaced floor by floor. However, Survivor/O® replacements will not cross fire like Otis original equipment. If cross firing is a requirement, rewire between hall stations at each floor. 3300Ω/5W RED BLUE Survivor pushbutton base (for reference) Survivor/O—Reg. TM Adams Elevator Equipment Company 260 Fax: 1-847-581-2949 Rev. 6/98 • US: 1-800-929-9247 • www.adamselevator.com Otis Survivor/O® Crossfire/Hall Survivor/O® Mechanical Alternative to Touch Buttons SCHEMATIC Module 2040 1st Riser WHITE INSTALLATION B+ COMMON TO OTHER BUTTON BLACK BLUE 24CSB BULB (A-487L9), OR 24-28V LED [A-494LR3 (red) & A-494LW3 (white)] RED WHITE Module 2040 2 nd, 3rd, etc. Riser DH OR UH FLOOR WIRE (USED AS A TERMINAL ONLY, NOT A BUTTON) B+ COMMON TO OTHER BUTTON CONNECTION BETWEEN BLUE WIRES OF CORRESPONDING BUTTONS FOR CROSS-FIRING BLACK BLUE 24CSB BULB (A-487L9), OR 24-28V LED [A-494LR3 (red) & A-494LW3 (white)] RED DH OR UH FLOOR WIRE (USED AS A TERMINAL ONLY, NOT A BUTTON) NOTE: The B+ or COMMON to other button is the field wire that goes to the shield(s); it is normally installed on terminal #3 of the Otis assembly, which is jumped to #5. The DH or UH floor terminal wire is #2 of the Otis assembly for terminal floors and DOWN calls. It is #1 for UP calls, except the bottom terminal. The #4 wire removed from the Otis assembly is not used. Tape it and make sure it does not contact anything. Adams O-486E Modules and mechanical buttons are suitable replacements for Otis 2040 tubes and Touch Buttons. A wiring modification is required to retain cross-firing in existing multiple-riser Otis installations. For cross-firing with more than one riser, you must connect together the blue wires of the corresponding hall buttons, Up to Up and Down to Down (see schematic diagram at left). On a two-riser job, for example, you would make the following connections: 1) One wire between the two hall stations on both terminal floors; and 2) Two wires between the two hall stations on each intermediate floor. In this manner, a 10-floor double-riser job would require 18 cross connections. TO B+ COMMON TO OTHER BUTTON JUMPER DH OR UH FLOOR WIRE USED AS TERMINAL ONLY, NOT A BUTTON RED DO NOT USE MODULE BLUE WHITE BLACK Survivor pushbutton base (for reference) Survivor/O® pushbutton: preferred alternative to Otis Touch Buttons Mechanical Base is unaffected by humidity. Self-cleaning silver-clad contacts for maintenance-free service (under normal use) Round or square halos and Otis-style coverplates match existing installations Compatible with Otis stud coonfigurations Note: In a COP, all buttons must be changed out at the same time for proper operation. Hall stations can be replaced floor by floor. However, Survivor/O® replacements will not cross fire like Otis original equipment. If cross firing is a requirement, rewire between hall stations at each floor. Electronic module replaces obsolete Otis drop tubes, reducing inventory problems. Each Survivor/O® comes with the Adams Survivor button switch Survivor/O—Reg. TM Adams Elevator Equipment Company www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 261 Otis Pushbuttons/Survivor/O® HALL STATIONS WITH ROUND OR SQUARE BUTTONS Survivor/O pushbutton assemblies are available mounted on hall station cover plates that match existing Otis plates. Choose O486A-series round halos or O487A-series square halos; bronze or stainless finishes; formed or flat contours; terminal and intermediate configurations. HALL STATION SELECTION TABLE Round halos (11/2" dia.) Adams part no.* O486A1 O486A2 O486A3 O486A4 O486A5 O486A6 O486A7 O486A8 O486A-A O486E A487L9 No. of buttons Cover plate material Square halos (13/4" x 13/4") Plate contour Adams part no.* No. of buttons Cover plate material Plate contour 1 Stainless Formed† O487A1 1 Stainless Formed† 2 Stainless Formed† O487A2 2 Stainless Formed† 1 Bronze Formed† O487A3 1 Bronze Formed† 2 Bronze Formed† O487A4 2 Bronze Formed† 1 Stainless Flat O487A5 1 Stainless Flat 2 Stainless Flat O487A6 2 Stainless Flat 1 Bronze Flat O487A7 1 Bronze Flat 2 Bronze Flat O487A8 2 Bronze Flat Pushbutton assembly only O487A-A Pushbutton assembly only Electronic module (order 1 module for each pushbutton) Replacement lamp, ref. #24CSB, 24V, 0.017 amps Side view Survivor/O halo extends further at top than at bottom *Each pushbutton features molded-in arrow; mount in UP or DOWN position or flip button base. † Formed plates attach with single screw at bottom rear of plate. CAR PANEL BUTTON ASSEMBLIES, ROUND AND SQUARE HALOS AVAILABLE O487A-series Maintain the uniform look of Otis car panels by replacing worn or damaged pushbuttons with Survivor/O assemblies. Each Survivor/O button face matches Otis character height, stroke width, type style, and color. O486A-[character] for round halo or O487A-[character] for square halo. O486A-series Survivor/O car buttons preserve your system’s uniform look Survivor, Survivor/O—Reg TM Adams Elevator Equipment Company ALSO AVAILABLE... 6849B5 Otis Terminal Plate 6849B4 Otis Intermediate Plate 262 Fax: 1-847-581-2949 6849C6 Otis Base • US: 1-800-929-9247 • www.adamselevator.com Otis Pushbuttons/Electronic REPLACEMENT ELECTRONIC TOUCH BUTTON COMPONENTS FOR CAR AND HALL PANELS ROUND HALO TOUCH BUTTON COMPONENTS Adams part no. Otis part no. O480H2 306KH2 O480B2* 323BL2 O480CP1 O480CP2 O480CP5 O480CP7 O480ST2 O485ST3 O480N1 O480S1 147FD5-3 147FD6-3 147JF5-3 147JF6-3 278BP2 278AN1 72CG3 90WE14 O480H2 O480CP1 Description Round halo base, frosted Lexan; 11/2" dia. halo, 13/4"x2 3/4" rectangular base; 2 mtg. holes, 2 mtg. slots (for car panel) Electronic touch button, black, 7/8" dia.; full range of characters and numbers; see below to order Hall station cover plate, terminal; formed 3" x 10" stainless Hall station cover plate, intermed; formed 3" x 10" stainless Hall station cover plate, terminal; flat 3"x10" stainless Hall station cover plate, intermediate; flat 3"x10" stainless Plain brass shield tube for car station Same as O-480ST2, w/clip. (not shown) Brass nut, 5-40 thread Brass spring O480ST2 O480CP8 O480B2-4 O480N1 O480S1 SQUARE HALO TOUCH BUTTON COMPONENTS Adams part no. Otis part no. O485H1 O485B2* A306GC2 323BH2 O485N1 O480S1 O485CP1 O485CP2 O485CP5 O485CP7 O482 O483 72CG1 90WE14 147FD1-3 147FD2-3 147JF1-3 147JF2-3 — 306JG1 306JH1 O485CP1 Description Halo base, square; frosted Lexan™ Electronic touch button, black, 7/8" sq.; full range of characters & numbers; see below to order Brass nut, 5-40 thread Brass spring Hall station cover plate, terminal; formed stainless Hall station cover plate, intermediate; formed stainless Hall station cover plate, terminal; flat 3"x10" stainless Hall station cover plate, intermediate; flat 3"x10" stainless Clear halo, 1.355" dia. x 1"L Clear halo, 2-piece clear Lexan; 1 5/16" dia. inner ring; 13/4" sq. outer mounting with 13/16" cavity; O485CP8 O485H1 O482 O480S1 O483 O485B2-2 O485N1 REPLACEMENT PUSHBUTTONS FOR ELECTRONIC TOUCH BUTTONS* O480B2-series (round) and O485B2-series (square) buttons feature black Lexan face with white plastic characters molded in. Button face is molded onto a 5 /16" brass conductor stem that provides “condenser-effect” sensitivity equal to the OEM value. O480B2-3 Order O480B2-[character] (e.g., O480B2-LB for round button with molded-in “LOBBY”). Order O485B2-[character] (e.g., O485B2-25 for square button with molded-in “25”). O480B2-LB O480B2-25 O485B2-3 Double-injection molding means character won’t scratch off, so there's no need for a clear cap! O485B2-25 O485B2-LB Hall and blank buttons are not available in this series Lexan—Reg TM General Electric Corporation www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 263 Otis Pushbuttons/Electronic ELECTRONIC PUSHBUTTONS (FOR CAR ONLY)* ELECTRONIC COMPONENTS The buttons have black faces that are ultrasonically-welded into button bases, and white markings. They replace Otis 306KVseries buttons. O481B-[character] (e.g., O481B-12 for button with numeral 12). O862 solid-state activated switch assembly O481B-L O481B-12 65 & 73 TERMINAL BOARDS * PLEASE NOTE: Touch buttons for hall stations are not available from Adams. Touch buttons are NOT intended to be and should NOT be installed as a hall component at an elevator entrance. If you need to replace the buttons in your hall station, please consider upgrading to Survivor/O buttons. Adams part no. O876 O877 Otis part no. CSG HSJ Adams part no. O862 Otis Description part no. 2050 tube Solid-state activated 607C1 switch 264 425B1 Otis Touch Tube 3”L x 1.00” O.D. 425D1 Otis Touch Tube 4.12” L x 1.56” O.D Fax: 1-847-581-2949 • US: 1-800-929-9247 Car button Hall button ASSEMBLY ALSO AVAILABLE FOR REPLACING EXISTING TOUCH TUBES 425P1 Otis Touch Tube 2.18”L x .68 O.D. Description • www.adamselevator.com Otis Pushbuttons/Mechanical O464-SERIES MECHANICAL PUSHBUTTONS Adams manufactures a complete line of replacement pushbuttons and pushbutton components for the Otis Type A7069A1 mechanical pushbutton. O462 Buttons are 7/8" round black ABS plastic with molded white characters. Each button is molded onto a 1"-long steel stem with 1/4" square steel shoulder. Halos are clear Lexan™. O464 MECHANICAL BUTTONS AND ASSEMBLIES O464D O464H O464C O464B-5 Adams part no. Description Otis part no. O464B-[char] O464C O464D O464H O462 A487L5 Button Guide, zinc w/brass nut Pushbutton base Clear Lexan halo Mechanical switch w/lamp Neon lamp, 0.025 amps/120V (sold 10/pkg.) 323BP A385KC1 306KJ1 306JG2 7035A28 424G1 Lexan–Reg. TM General Electric Corporation HALL STATION COVER PLATES (3" X 10") FOR OTIS MECHANICAL PUSHBUTTONS HALL STATION PLATES (3" X 10") Adams part no. O464CP1 O464CP2 O464CP3 O464CP4 O464CP5 O464CP6 O464CP7 O464CP8 Description Terminal, formed stainless Intermediate, formed stainless Terminal, formed bronze Intermediate, formed bronze Terminal, flat stainless Terminal, flat bronze Intermediate, flat stainless Intermediate, flat bronze Otis part no. 147FD3-3 147FD4-4 147FD3-7 147FD4-7 147JF3-3 147JF3-7 147JF4-3 147JF4-7 www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 Formed cover plates (left) and flat cover plates (right) are available in stainless and bronze finishes, in both terminal and intermediate configurations; all models are 3" wide x 10" high Mounting holes are 8 5/8" center to center 265 Otis Pushbuttons/Signal Components O450-SERIES PUSHBUTTONS Black Lexan button ( 7/8" dia.); chrome plated characters are molded into button face. Available as components only. O450 SERIES PUSHBUTTONS Adams part no. Otis part no. A323AF1 — — O450B-[char.] O452 O453 O450B-1 O453 Description Button only Button base Button guide O450B-2 O452 O451-SERIES PUSHBUTTONS Black Lexan button (11/32" dia.) white plastic character inserts molded into button face. Available as components only. O454 O451B-1 O451 SERIES PUSHBUTTONS O452 Adams part no. O451B-[char.] O452 O453 O454 O451B-2 O453 Otis part no. 323BD1 — — — Description Button only Button base Button guide Spring Also available in red for BLANK (order O451B-RBL) or EMER CALL (order O451B-REC; Otis part no. 323BD6). O467-SERIES PUSHBUTTONS Black Lexan™ buttons with white characters hot-stamped into the face; clear caps are sonically welded to 1"-dia. button body. Replaces O450 & O451 in newer Otis installations. Available as components only. O454 O467 SERIES PUSHBUTTONS Adams part no. O467B-[char.] O452 O453 O454 O452 O467B-1 O453 Otis part no. A323BD1 — — — O467B-2 Description Button only Button base Button guide Spring Lexan—Reg. TM General Electric Corporation Also available in red for BLANK (order O467B-RBL) or EMER CALL (order O467B-REC; Otis part no. A323BD6). Swaging tool O457 266 Fax: 1-847-581-2949 • Installs O450, O451 and O467-series pushbuttons to cover plates; use with O453 button guide MT114289 US: 1-800-929-9247 • www.adamselevator.com Otis Pushbuttons/Signal Components Hall plates come with mounting hardware Also available: round PI lenses...see below 8 3/8" 6" P.I. Lens Replacements These hot-stamped P.I. lenses are 1-to-1 replacements for the 19/16" x 19/16" x 7/32" lenses found in original Otis units. They replace Otis part no. 499AD. O450CP1 O488W-[char] for square P.I. lens replacement O450CP2 O489W-[char] for round P.I. lens replacement HALL STATION COVER PLATES Adams part no. Description O450CP1 O450VB O450D 15 (mounting holes are /16" from end on both models) O451D Hall plate (terminal) for one O-450-[arrow] pushbutton; stainless steel, 21/2" x 713/16" Hall plate (intermediate) for two O-450-[arrow] pushbuttons; stainless steel, 2 1/2" x 101/4" O450CP2* O-467, O-450 & O-451 ACCESSORIES 7069AF7 Adams part no. Description Otis part no. O450VB Vandal resistant button; machined to a bullet shape out of aluminum rod stock; for installations requiring vandal-resistant pushbuttons; can be substituted for O-450, O-451, and O-467-series buttons Aluminum pushbutton, 7/8" dia.; replaces O-450-series plastic buttons Aluminum pushbutton, 11/32" dia.; replaces O-451-series plastic buttons VP728210 7069AF12 278EA1 O450D O451D 7069AF SERIES BUTTONS Part No. Description 7069AF1 BLANK 7069AF11 UP ARROW 7069AF12 DOWN ARROW 7069AF3 DOOR OPEN 7069AF37 EMERGENCY STOP SWITCH 7069AF41 DOOR OPEN 7069AF42 DOOR CLOSE 7069AF7 ALARM SYMBOL 7069AF9 FIRE SERVICE RESET Call for other designations Also Available 278EA1 BUTTON SHIELD REFLECTOR — — BUTTON INSERTS FOR 323DA1 323DA2 BUTTON CAPS FOR Part No. 323DA1 323DA2 323DA3 7069AF SERIES Color WHITE GREEN YELLOW Part No. 250D1 250D11 250D2 250D21 250D3 250D4 250D5 250D6 7069AF SERIES Floor Marking 1 B 2 21 3 4 5 6 www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 250D1 250D11 267 Otis Otis KEYSWITCH DETAILS Keyswitch Part No. 7069AH10 7069AH11 7069AH36 7069AH48 7069AH58 7069AH4 7069AH34 7069AH9 7069AH33 7069AH16 7069AH21 7069AH17 7069AH42 7069AH38 7069AH59 7069AH40 7069AH41 7069AH26 7069AH60 250E35 LEGEND FIRE SERVICE FIRE SERVICE FIRE SERVICE FIRE SERVICE FIRE SERVICE ATTENDANT SERVICE IND. SVC. ACCESS CAR TOP Symbol (LIGHT) LIGHT FAN Symbol (2SPD FAN) LIGHT RAY REAR LIGHT RAY Symbol (UP ARROW Hall Call) Symbol (DN ARROW Hall Call) Symbol (EXPRESS SERVICE) (Emergency Stop Switch) 250E32 Key Function ON OFF BYPASS OFF ON ON OFF ON OFF BYPASS ON HOLD OFF ON OFF GROUP OFF INSPECT OFF 0 1 0 1 OFF ON 1 0 11 ON OFF ON OFF ARROW ARROW 1 0 RUN STOP Remove Off On Remove at Off Remove at Off Remove Off On Remove On Hold Off Remove at On Off Remove at Both Momentary Center Remove at Both Remove Both Remove Both Remove Both Remove All Positions Remove at On Off Remove On Off Momentary Center Momentary Center Momentary Center Remove at Both Key UTF UTF UTF UTF UTF UTC UTA UTE UTA UTA UTA UTA UTA UTA UTA UTD UTD UTD UTA Key Mtg Plt Part No. Thickness 6410W-UTF 0.040 6410W-UTF 0.040 6410W-UTF 0.040 6410W-UTF 0.125 6410W-UTF 0.040 6410W-UTC 0.040 6410W-UTA 0.040 6410W-UTE 0.040 6410W-UTA 0.040 6410W-UTA 0.040 6410W-UTA 0.040 6410W-UTA 0.040 6410W-UTA 0.040 6410W-UTA 0.040 6410W-UTA 0.040 6410W-UTD 0.040 6410W-UTD 0.040 6410W-UTD 0.060 6410W-UTA 0.040 7069AH34 7069AH33 250E19 250E34 Insert Part No. 250E21 250E20 250E20 250E21 250E35 250E14 250E32 250E19 250E31 250E15 250E15 250E17 250E34 250E33 250E36 250E26 250E26 250E23 250E37 COMPONENTS FOR 7069Y SERIES BUTTONS 7069Y1-BL 323CK1 386BNM1 177BS1 278AN1 Description JEWEL ASSEMBLY BUTTON ASSEMBLY BUTTON ASSEMBLY BUTTON SHIELD INSULATOR BASE BUTTON SHIELD FOR TOUCH BTN 386BNM1 BUTTON ADAPTOR PLATE 177BS1 BUTTONS SWITCH 7069Y1 BUTTON AND HALO ASSB, INCLUDES 177BS1 306GD2 Otis Insulator Base 7069AG31 & G32 Otis Push Button Assy 268 Description BUTTON HALO 1” DIA. 7069AG2 Otis Jewel Module MISC. COMPONENTS FOR OTIS BUTTONS Part No. 7069AG2 7069AG31 7069AG32 278CE2 306GD2 Part No. 323CK1 Fax: 1-847-581-2949 • US: 1-800-929-9247 278CE3 Otis Button Shield • www.adamselevator.com 278AN1 Otis Button Shield Otis Pushbuttons/Accessories INCANDESCENT LAMPS A488L4 A488L2 Adams part no. Description A488L2 A488L4 A491L1 12V/6W, candelabra base; 10/ pkg. 120V/6W, candelabra base; 10/pkg. Reflector-type 120V, candelabra base; 10/pkg. A491L1 O465B O468H2 ACCESSORIES Adams part no. O455 O456 O465B O465C O468H1 O455, 456 O465Cseries Otis part no. 6599D6 6599D8 424H1 O468D1 O468BC1 O468BC1 O468D1 O468H1 O468H2 Description Hall station marker/jewel, red, w/arrow; 13/16" dia. Same as O455, green, w/arrow; 13/16" dia. Rubber band for dial indicator, 24 slots Characters for dial indicator, white on black; 7 /16" x 1" plastic; available numerals 1 thru 30, L, LL, M, B; order part no. O465C-[character] Pushbutton cap, clear Lexan™ Actuator, clear Lexan Halo, clear Lexan Halo adaptor Otis part no. 499Z5 499Z6 297F1 428E1 323CK1 306MN1 306MK1 386BNM1 Lexan—Reg TM General Electric Corporation MORE INCANDESCENT AND LED LAMPS AVAILABLE THROUGHOUT THE CATALOG. OB466A1 EUROPEAN PUSHBUTTON SWITCH ASSEMBLY Otis part no. Adams part no. Description OB466A1 Pushbutton switch assembly, normally open; for European-market cabs & hall stations — www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 269 Otis O461A1 Pushbuttons/Switches, Contacts O461A2 O461A4 O461A3 O461B1 O461A5 O461B2 O462 MECHANICAL PUSHBUTTON SWITCHES Adams part no. O461A1 O461A2 O461A3 O461A4 O461A5 O461B1 O461B2 O462 Type of contacts Single MAKE Single BREAK Single MAKE/BREAK Double MAKE (2 switches) Double MAKE/BREAK (2 switches) Single MAKE/BREAK; button = 3/4" dia. x 3/4"L Single MAKE/BREAK; button = 3/4" dia. x 3/8"L Single MAKE w/pilot lamp for O-464 mechanical switch Button mtl. Otis part no. Steel Plastic Steel Steel Steel Tenite Tenite Steel 7035A9, A2 7035A25, A23 7035A8, A1 7035A11, A4 7035A10, A3 7035A12, A5 7035A14, A7 7035A28, A27 NOTE: MAKE is normally open and BREAK is normally closed. 0462 includes A487L5 Lamp. STANDOFF FIXTURES O461SB2 Adams part no. Description O461SB1 Mount one (1) O461-series mechanical pushbutton switch; includes 2 spring clips, not shown Mount two (2) O461-series mechanical pushbutton switches; includes 2 spring clips, not shown O461SB2 Otis part no. 6600A83 6600A80 O461SB1 PUSHBUTTON CONTACTS O463A 270 O463B Description Otis part no. O463A O463B O463C O463D Pushbutton ass'y. w/single MAKE contact Pushbutton contact Pushbutton contact with spring & eyelet Pushbutton contact with spring, eyelet & guide 6526G1 150H5 150H7 150H9 O463D O463C Fax: 1-847-581-2949 Adams part no. • US: 1-800-929-9247 • www.adamselevator.com Otis Miscellaneous Electrical MISCELLANEOUS ELECTRICAL 225CG3 Otis Transformer HT200750-1 Otis Veloc. Transformer HT201781-1 Otis Power Supply A6379P1 Otis Inductor Switch HT206412-2 Otis Gen. FLD P/A 6333CC2 Otis Motor, Operator 7770A .25 HP,90 VDC,65 RPM HT200710-2 Otis Transformer 6333AJ1 Otis Motor, GE .500HP DC SMALL MISCELLANEOUS SWITCHES Otis Knife Switch Assembly 12110 - Used with EA safety car switch 12111 - Used with E safety car switch 180DA1 Otis Switch Holder, Double 180DA2 Otis Switch Holder, Single 232C8 Otis Rheostat, 100W, 100 Ohms, 3.13” dia. 177CB7 Otis Switch, Rotary 177DA1 Otis Micro Switch, 5 Amps, 125/250 VAC www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 177CC5 Otis Switch, 3 Pos., 8 Pin, 2 Hole 4514A18 Otis Door Switch 271 Otis Miscellaneous Parts & Hardware SPROCKETS FOR DOOR SYSTEMS 195AT2 Otis Sprocket 195CH2 Otis Sprocket 12 teeth 1.56" O.D. for 6850A, B, C 195CP2 Otis Sprocket 9 teeth 1.25" O.D. .75" W .325" I.D. Used on 305 Operator 195GK2 Otis Sprocket .626 I.D. 10 teeth Used on 7300A,AA SHEAVES AND ROPES SHEAVE ROPES Part No. 251BT3 251BT5 251BV1 251BV5 Description 27" Drive Sheave, 1/2" Treaded Rope 30" Drive Sheave, 1/2" Treaded Rope 32" Drive Sheave, 5/8" Treaded Rope 28" Drive Sheave, 5/8" Treaded Rope 251BT3 Otis Sheave Rope 265BC2 Otis Sheave 5" diameter 265BD2 Otis Sheave 2 5/8" diameter MISCELLANEOUS BUSHINGS BUSHINGS 335E22 Otis Oil lite Bushing 335E86 Otis Oil Lite Bushing 128AG61 Otis Washer 1.50" O.D., 1.00" I.D., .016" Thk. 334C1 Otis Bushing 272 Fax: 1-847-581-2949 Part No. O.D. I.D. 321CJ4 1.475" .75" 321CJ3 1.398" .75" 212T4 1.13" 1.00" 335E22 1.25" 1.00" 335E84 0.88" 0.75" 335E86 0.63" 0.50" 335H7 .75" .50" 335H12 .68" .50" *212T4 Used on R Governor 321CJ4 Otis Bushing 335E84 Otis Oil Lite Bushing • US: 1-800-929-9247 • www.adamselevator.com Length 1.12" 1.13" 1.00" 0.75" 1.12" 0.37" .62" .63" Flange .188"dia. .188"dia. n/a n/a n/a n/a .88"dia. .88"dia. Otis Miscellaneous Parts & Hardware 288MB4 Otis Roller Arm 288LL2 Otis Lever w/Bushing 278T5 Otis Moveable Contact Arm 327DJ4 Otis Cam 2700ADZ1 Otis Door Lock 287R4 Otis Moveable Contact Arm 327AV1 Otis Cam 327AV3 Otis Cam 327CX2 Otis Cam 327CX6 Otis Cam 297C1 Strap Gate 30" 2166J3 Otis Cam 2166J4 Also Available 386TZ1-3 Otis Escutcheon-SS 13433 Otis Insulator 180AE2 Otis Switch Holder 488B1 Otis Felt Wick 316AHJ1 Otis Bracket 174AB1 Otis Cable 18066 Otis Insulator 316BCR1 Otis Bracket Also Available Cables 174AK2 174AV1 142740 Otis Cable 14” Long 346AEH1 Otis Black Neoprene Cover www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 456By1 Otis Limit Switch Roller 273 Otis Miscellaneous Parts & Hardware BEARINGS 467AT1 Otis Roller Bearing 2700AEJ1 Otis Bearing & Pin 207R2 Otis Ball Bearing O.D. 1.81”, I.D. .393” 172PM1 Otis Retaining Ring 462GR1 Otis Washer 131BD1 Otis Washer 274 209AF2 Otis Bearing O.D. 1.31”, I.D. 1.00”, 1”L, Needle Roller, w/Caged open end 207BN1 Otis Ball Bearing, w/Double Row & Double Seal, O.D. 1.18”. I.D. .39”, 1.10”L 172DR3 Otis Retaining Ring 207AN1 Otis Ball Bearing w/Adaptor, Single Row Radius, w/Double Shield O.D. 2.83”, I.D. 1.13”. 1.53”L 172DR6 Otis Retaining Ring 129AR1 Otis Washer US: 1-800-929-9247 124CA1 Otis Screw 145C3 Otis Brake Lining Rivet 131BG1 Otis Washer 129DH2 Otis Washer 131Z2 Otis Washer 133A7 Otis Washer • 132350 Otis Motor Bearing Sleeve, Bronze (DC/DC & AC/DC), O.D. 2.75”, I.D. 1.75”, 4.50”L 124BS1 Otis Ball Screw 65EA2 Otis Bolt 129BT1 Otis Washer 10014 Otis Insulator Fax: 1-847-581-2949 456G1 Otis Roller Bearing • www.adamselevator.com 59P2 Otis Bolt Otis Miscellaneous Parts & Hardware 18074 Otis Insulator Tube 310BE1 Otis Sound Isolation Pad 607C1 Otis Diode Tube 136R10 Otis Tube Magnet Core 623E2 Otis Timer 6631C1 Otis Stepper www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 275 Otis Pushbuttons/Emergencay Stop Switches Halo = 1.25" dia., .25" high 2" deep O471K1 Halo = 1.31" dia. Keyed Stop Switch ASME A17.1, 210.2(v), 1990 requires keyed stop switches in new passenger elevators where STOP switches are specified. Our Otis complete keyed switch meets this requirement with great attention to detail. Great for replacements as well: Conventional push/pull STOP switches allow vandals to leave elevators stranded, criminals to stop between floors to rob tenants, and passengers to interrupt elevator operation accidentally by leaning against the car panel. Adams keyed STOP switch for Otis comes with assorted spacers, so you need only stock one STOP switch for all your Otis installations! Uses key no. AE102 O471K1. 2 NC contacts. (Key No. AE102) O471K2. 1NO/1NC contacts. COMPLETE STOP SWITCHES O474A O471AX O471A Adams part no. O471A O471B O471AX* Red phenolic button, 1" dia., w/auxiliary contacts Same as O-471A, w/o auxiliary contacts Same as O-471A, with momentary contact and engraved “STOP While Pressed” Same as O-471B, with momentary contact and engraved “STOP While Pressed” Switch with 3/4" dia. button, w/auxiliary contacts Same as O-472A, w/o auxiliary contacts Same as O-472A, w/spring return & auxiliary contacts Same as O-472C, w/o auxiliary contacts Same as O-471A, with aluminum pushbutton Same as O-472A, with aluminum pushbutton Mounting base for all complete STOP switches listed; 1" x 31/8", with 2 welded studs O471BX* O472A O472A O472B O472C O472D O474A O474B O471SB O471SB Otis part no. 2NC / 1NO AUX Description 7014A1 7014A2 n/a n/a GS1-7014A1 GS1-7014A2 GS1-7014A3 GS1-7014A4 n/a n/a 6800DJ1 STOP BUTTON & CAM ASSEMBLIES Adams part no. O473B1 O473B2 O473B3 O473B4 O473B5 O473B6 O473B1X O473B4 O473B2 Otis part no. Description O473B2X O370S1 Phenolic button and cam assembly, 1" dia. Phenolic button & collar with cam assembly, 1" dia. Button and cam assembly, 3/4" dia. Button w/spring return & cam assembly Aluminum button and cam assembly, 1" dia,. Aluminum button & collar with cam assembly, 1" dia. Phenolic button & cam assembly, 1" dia.; engraved “STOP While Pressed” (Canadian model) Phenolic button & collar with cam assembly, 1" dia.; engraved “STOP While Pressed” (Canadian model) Return spring; 17/64" I.D. x 13/16"L; 0.013 wire dia., 11 turns O471AC1X STOP SWITCHES WITH COLLARS Adams part no. A7014B1 A7014B5 GS1-7014B1 GS1-7014B2 n/a n/a n/a n/a 90GA2 O471BC1X Otis part no. Description O471AC1 Red phenolic button & collar, 1" dia., w/auxiliary contacts O471BC1 Red phenolic button & collar, 1" dia., w/o auxiliary contacts, 2NC w/o Aux O471AC1X* Same as O471AC1, with momentary contact; engraved “STOP While Pressed” O471BC1X* Same as O471BC1, with momentary contact; engraved “STOP While Pressed” O474AC1 Same as O471AC1, with aluminum button & collar, 1NO, 2NC w/Aux contacts *Canadian model. Contacts 2NC, Auxiliary, 1NO 276 Fax: 1-847-581-2949 7014A9 7014A10 O474AC1 n/a n/a n/a O471BC1 O471AC1 • US: 1-800-929-9247 • www.adamselevator.com Otis Rectifiers Replacements for Otis Rectifiers Pure selenium laminate on each plate puts Adams rectifiers among the most reliable you will find R011 R023 R012 R021 R022 R010 RECTIFIERS Adams part no. Max. volts 36 156VAC 190VDC 2.2 400W 60W 125W 25W 2000W 2000W 1000W 10W 30 6 30 30 30 130VAC 156VAC 130VAC 130VAC 130VAC 157VDC 68VDC 157VDC 157VDC 157VDC 6 156VAC 68VDC 4.4 0.85 1.1 0.25 17.6 17.6 8.8 0.13 350W 85W 125W 500W 1000W 45W 4 30 30 30 30 20 104VAC 130VAC 130VAC 130VAC 130VAC 130VAC 44VDC 157VDC 157VDC 157VDC 157VDC 100VDC 7.2 0.75 1.1 4.4 8.8 .5 Nom. wattage No. of plates R010* 2 5/8" x 2 5/8" x 117/8"L 3Φ bridge 250W R011 R012 R021 R022 R023* 2 5/8" x 2 5/8" x 12"L 15/8" x 15/8" x 31/4"L 2" x 2" x 91/8"L 1" x 1" x 6 5/8"L 4" x 5 3/8" x 12"L R050* 1" x 1" x 21/8"L 3Φ bridge 1Φ half-wave 3Φ bridge 3Φ bridge 3Φ bridge 3Φ bridge 3Φ bridge 1Φ half-wave R061 R062* 4" x 53/8" x 31/8"L 13/8" x 13/8" x 7 5/8"L 15/8" x 15/8" x 7 5/8"L 2 5/8" x 2 5/8" x 131/8"L 4" x 4" x 13 1/8"L 13/5" x 13/5" x 3 1/4"L 1Φ half-wave 3Φ bridge 3Φ bridge 3Φ bridge 3Φ bridge 1Φ bridge R025 R026 R065 DC output Max AC input Dimensions Electrical configuration Nom. amps Otis part no. 230AG1 230BJ2 230AJ1 230AZ1 230AL1 230AL2 230BJ5 230BA1 230AL3 230AR1 230AR2 230AR3 230AV1 230AW1 230BJ1 230BJ3 230BJ4 230AY3 *Replaces all Otis parts listed. www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 277 Otis Capacitors, Timers 1 3/8" dia. and 2 1/2" dia. clips available separately below, pictured at right C022 C021 C021-01 C015 C013 C012-02 CAPACITOR CLIPS Adams part no. C001 ALUMINUM ELECTROLYTIC CAPACITORS Adams part no. C001 C005 C006 C011 C012 C013 C014 C015 C021 C022 Capacitance (μƒ) 8 1 2.5 125 250 125 250 5 1600 1600 Max input voltage (AC/DC) 450 600 600 150 150 150 150 150 150 150 on (+) term. Diameter 3 1 /8" 13/8" 13/8" 13/8" 13/8" 13/8" 13/8" 13/8" 21/2" 21/2" n/a n/a n/a n/a n/a C025* C025* n/a n/a C025* Timer avail. below ✓ ✓ ✓ ✓ 1 3/8" 2 1/2" C012-02 C021-01 C011 C005 Capacitor diameter Otis part no. Resistor 226C1 226D1 226D2 226H1 226H2 226H3 226H4 226H5 226W1 226W2 RESISTOR TUBE C025 resistor (250W/10W) is used with capacitors C013, C014 and C022; replaces Otis part no. 232AE1. O21P2 terminal stud for C025 resistor. C025 resistor, shown separately and installed on capacitor no. C-013 with O21P2 terminal stud in place *Adams part no. C025 resistor replaces Otis part no. 232AE1 and is available separately at right. A103C1 SOLID-STATE TIMER No more changing out bad capacitors! This solid state, 20-120V DC only timer is for: • Delay on BREAK • Delay after DE-ENERGIZE • OFF delay • Delayed DROP OUT MORE CAPACITORS... Dip switches on back can be set from 0.1 to 102.3 seconds. 226W3 Otis Capacitor A103C1 278 Fax: 1-847-581-2949 • US: 1-800-929-9247 • 226H7 Otis Capacitor www.adamselevator.com Otis Miscellaneous Resistors, Audibles, Gaskets, Bumpers RESISTORS ADJUSTABLE RESISTORS Part No. 232AA40 232AA42 232AA48 232B10 232B11 232B20 232B3 232B6 232B7 232E126 232E127 232E130 232E131 232Y20 232Y25 Watts 400 400 400 30 30 30 30 30 30 60 60 60 60 20 20 Ohms 1.32 2.08 14.1 150 200 1500 10 25 50 40 50 125 150 250 400 Length 10.06” 10.06” 10.06” 3” 3” 3” 3” 3” 3” 8” 8” 8” 8” 2” 2” 232E126 Otis Adjustable Resistor, 8”L, 60W, 40 ohms 232Y25 Otis Adjustable Resistor, 2”L, 20W, 400 ohms 232B11 Otis Adjustable Resistor, 3”L, 30W, 200 ohms 232B10 Otis Adjustable Resistor, 3”L, 30W,150 ohms AUDIBLES 311B2 Otis Gong 311B8 Otis Gong w/Coil 311B1 Otis Gong GASKETS FOR DOOR OPERATORS 6970A OTIS 376CV1 Otis Gasket 372DE1 Gasket for 6970A Door Operator 376CX1 Otis Gasket 311B4 Otis Gong w/Coil 6219D1 Otis Buzzer 4356E1 Otis Emeg. Alarm Bell 12V MISCELLANEOUS DOOR BUMPERS 320AD2 Otis Bumper 1.625”W 320AM1 Otis Bumper www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 320CD1 Otis Bumper 279 Otis Hydraulic Packing OTIS/CAST IRON HYDRAULIC PACKING KITS Each hydraulic packing kit for Otis/Cast Iron consists of: Piston diameter • Two (2) seals • One (1) wiper • One (1) lantern ring * OTIS/CAST IRON Adams part no. Piston diameter Bearing no.* GK03875OC 37/8" GB03875B1 GK04375OC 43/8" GB04375B1 GK05437OC 57/16" GB05437B1 GK06500OC 61/2" GB06500B1 GK07500OC 71/2" GB07500B1 GK08500OC 81/2" GB08500B1 GK09500OC 91/2" GB09500B1 GK10625OC 10 5/8" GB10625B1 GK12625OC 12 5/8" GB12625B1 *Bearing rings are not included with these kits; they must be ordered separately on page 67. OTIS/WELDED HEAD HYDRAULIC PACKING KITS Each hydraulic packing kit for Otis/Welded Head consists of: Piston diameter • Two (2) seals • One (1) wiper • One (1) lantern ring OTIS/WELDED HEAD Piston diameter Bearing no.* Actual Otis desig. GK03875OW 37/8" 4" GB03875B4 GK04375OW 43/8" 41/2" GB04375B4 GK04875OW 47/8" 5" GB04875B4 51/2" GB05437B4 GK05437OW 57/16" GK06500OW 61/2" 61/2" GB06500B4 *Bearing rings are not included with these kits; they must be ordered separately on page 67. Adams part no. * SEE NEXT PAGE FOR HIGH-PRESSURE 280 AND TELESCOPIC Fax: 1-847-581-2949 • US: 1-800-929-9247 • www.adamselevator.com Otis Hydraulic Packing OTIS/HIGH PRESSURE HYDRAULIC PACKING KIT Our hydraulic packing kit for Otis/High Pressure consists of: Piston diameter • One (1) seal • One (1) wiper OTIS/HIGH PRESSURE Adams part no. GK02750OHP Piston diameter 2 3/4" Bearing no.* GB02750B4 * OTIS/TELESCOPIC HYDRAULIC PACKING KIT Each hydraulic packing kit for Otis/Telescopic consists of: • Three (3) seals, graduated sizes • Two (2) wipers, graduated sizes OTIS/TELESCOPIC Adams part no. GK1500OT GK2000OT GK2500OT GK4000OT Otis series no. 1500 2000 2500 4000 ADAMS REPLACEMENT PACKING FOR OTIS A patented blend of oil-resistant compounds insures long life without the risk of common “rubber breakdown.” Unique “wavy” split design for quick and easy installation without disconnecting the motor from the geared unit. Low friction from special baked-on finish prevents shaft scoring and damage from high temperatures. OTIS PACKING Adams part no. AT1R019 AT1R020 AT1R021 AT1R079 AT1R105 Machine #29 #22 #22 old #17 — Shaft dia. 3.000" 2.000" 2.000" 1.938" 5.313" Dimensions Bore dia 4.500" 3.000" 3.250" 2.875" 6.250" Thick .500" .500" .500" .313" .500" Otis part no. 33D26 33D29 — 33AA1 33D20 www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 281 Otis Shunts, Braided Connectors CONNECTOR LEGEND O546B L = length, center to center, fully extended A, B = terminal I.D. All dimensions given below follow the key above. O545A O542 O544A O521A O520A O530 O508 BRAIDED, WITH TERMINALS PUNCHED THRU FABRIC EXTRA-LONG SILICONE COVERED Adams part no. O508 O509 A 3 /8" 3 /8" Dimensions B L 3 /8" 151/2" 3 /8" 101/2" Otis part no. 175A33 106594 SILICONE COVERED (O-520-SERIES)* Adams part no. A Dimensions B O520A O520B O520C O520D O520E O520F O520G O520H O520J 0.171" 0.171" 0.171" 0.171" 0.171" 0.171" 0.171" 0.171" 0.171" 0.171" 0.171" 0.171" 0.171" 0.171" 0.171" 0.171" 0.171" 0.265" L 43/4" 21/2" 7 1/4" 21/2" 31/2" 3 3/4" 51/4" 5 3/4" 41/2" Otis part no. A 0.193" 0.193" 0.193" 0.193" 0.193" Dimensions B 0.193" 0.193" 0.193" 0.193" 0.193" L 3 3/4" 4 3/4" 5 3/4" 7 5/8" 6 1/2" A 9 /32" O542 *Wire size = 33-64, except O520D (33-34) & O520J (26-30). O545A O545B O545F †Wire size = 105-40 for all shunts in this series. Otis part no. 175J88 175J89 175J90 175J122 175J93 282 Dimensions B L 17 /64" 7 1/2" 17 /64" 8" 3 /16" 5 3/4" Wire size 105-30 65-30 105-34 A 25 /64" 21 /64" 17 /64" 17 /64" Dimensions B 25 /64" 21 /64" 25 /64" 17 /64" A 17 /64" 17 /64" 17 /64" Dimensions B 25 /64" 17 /64" 21 64" /2" 118 L 6 3/4" 131/2" 8" 9 3/4" Otis part no. 176KA1 176KA3 176KA6 176KA8 L 7" 7" 6 3/8" Otis part no. 176KA4 176KA10 176KA9, 14 1 /2" WIDE Adams part no. Dimensions A B 17 25 /64" /64" *Replaces 176KA11 & 176KA12 Otis part no. 175H1 175J25 175J80 Fax: 1-847-581-2949 1 THIN BRAIDED CONNECTOR, O546B A 17 /64" 17 /64" 3 /16" Otis part no. Width BRAIDED CONNECTORS, 1/2" WIDE Adams part no. SINGLE CONDUCTORS Adams part no. O530 O533 O537 Dimensions B L 9 /32" 41/2" BRAIDED CONNECTORS, 3/4" WIDE Adams part no. O544A O544B O544C O544D 175J1 175J2 175J3 175J4 175J5 175J6 175J8 175J9 175J16 SILICONE COVERED (O-521-SERIES)† Adams part no. O521A O521B O521C O521D O521F Adams part no. • US: 1-800-929-9247 • www.adamselevator.com L 6 3/8" Otis part no. 176KA13* Otis Motor Bearings & Machine Packing O601 O604 O613 O609 MOTOR BEARINGS All bearings from Adams are cast for superior strength and rigidity. Cast bearings withstand temperature and pressure better than their forged counterparts or those machined from bar stock. For long life and reliability, cast bearings should be your first choice. BRONZE SLEEVE MOTOR BEARINGS Adams part no. O600 O601 O602 O604 O605 O612 O613 Otis casting R-2671 R-2675 R-2676 R-2963 R-3110 R-2964 — Bore Length Motor no. 2" 21/4" 3 2 /4" 2" 21/8" 17/16" 5" 53/4" 7 6 /8" 5" 53/8" 3 1/2" 2" 3 3/4" 1 5 & 7 /2 AC 10, 15, 17 AC 20 to 35 AC 31/2, 4, 41/2 S 51/2 S & A-S 11/4 S, 11/2 S, 21/2 AC 71GA, 77G, 83 ES BABBITTED MOTOR BEARINGS Otis part no. 151357, 121932, 132347 151358, 121919, 132346 151359, 18742, 122236 151354, 101319, 132348 151355, 101322, 132349 151352 210R1 Adams part no. O608 O609 Length Bore 3 1 Description Otis part no. Old #1215MO-1; 210AA1 (supercedes 140694) Old #1084MO-1; 210BA1 (supercedes 138109) 2 /16" 5 /4" Babbitted bearing for 1A/1B MG, 89F motor 2 3/8" 6" Babbitted bearing for 2A/2B, 3A, 4AMG, 98G, 112G sets NOTE: Babbitted motor bearings are iron castings sealed and shipped in oil to protect against rust. MACHINE PACKING MACHINE PACKING O692 O699 Adams part no. O692 O693 O694 O695 O696 O697 O698 O699 Diameter Worm shaft Packing space 15/16" 2 1/16" 19/16" 2 9/16" 17/8" 31/8" 2 1/8" 33/8" 21/4" 3 1/2" 17/16" 2 7/16" 1 9/16" 2 9/16" 17/8" 3" Packing length 13/8" 111/16" 21/16" 25/8" 2" 1" 11/4" 25/8" Otis part no. 182A2 182A3 182A4 182A5 182A6 182A14 182A15 182A18 MISCELLANEOUS SEALS 33AA2 Otis Oil Seal-Solid 182A5 Otis Packing 182A17 Otis Packing 182C1 Otis Packing www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 33D14 Otis Oil Seal 2.25O” O.D. 283 Otis Brush Holders O700 O701 O703 O702 Only high-quality malleable bronze is used in our replacement brush holders, making them highly resistant to cracking or fracturing. O704 Under normal use and with proper installation, you can expect long, trouble-free life. See brushes on next page. Finest materials make our brushes superior to most OEM parts. BRUSH HOLDERS (PICTURED ABOVE) Adams part no. O700 O701 O702 O703 O704 Base size Brush size 1 5 2"L x 1 /2"W x /8" thick 2"L x 1"W x 3 /8" thick 2"L x 1"W x 3 /8" thick 2"L x 11/2"W x 5 /8" thick 2"L x 11/2" x 5 /8" thick 5 Long for /8" stud Long for 5 /8" stud Short for 5 /8" stud Large for 7/8" stud Short for 5 /8" stud BRUSH HOLDERS (PICTURED BELOW) Otis part no. 140535 6134G6, 140569 6134G7, 140569 140538 131468 NOTE: For replacement spring, order Adams part no. O700S1. See page 296 for more details. O705A 284 O705B Fax: 1-847-581-2949 Adams part no. Brush size O705A 2"L x 11/2"W x 1/2" thick O705B 2"L x 11/2"W x 5/8" thick O706A 13/4"L x 11/2"W x 3/8" thick O706B O707A O707B 13/4"L x 11/2"W x 1/2" thick (not shown) 13/4"L x 11/2"W x 3/8" thick 13/4"L x 11/2"W x 3/8" thick O706A • US: 1-800-929-9247 Base size 7 For /8" stud w/lip For 7/8" stud w/lip For 7/8" stud w/o lip; spring in 3rd notch For 7/8" stud w/o lip; spring in 3rd notch For 5/8" stud w/o lip For 5/8" stud with lip O707A • www.adamselevator.com Otis part no. 6134A1, A2 — 6134B2, B5 6134B1, B4 6134C2 6134D2 O707B Otis Motor Brushes Motor Brushes Adams carbon and graphite brushes are manufactured to match OEM grade and size specifications. The guide below will help you identify and solve brush-related problems, and help match the Adams to Otis brush that needs replacing. TROUBLESHOOTING GUIDE PROBLEM PROBLEM 6 Excessive sparking 5 Rapid brush wear (mechanical) Unequal brush wear 7 Chatter 8 4 Rapid brush wear (electrical) Breakage 9 3 Grooving Film discoloration 10 2 Heavy streaking Discolored shunts 11 1 Threading Flashover 12 POSSIBLE CAUSE Incorrect neutral setting or machine problem Vibration from internal or external source Insufficient or clogged ventilation High mica or high commutator eccentricity High ambient or commutator temperature Prolonged light load running Oil contamination Rapid load changes or control problem Incorrect or unequal spring pressure Faulty shunts or terminal connections Wrong brush grade Brush too tight or loose in holder Incorrect holder position or spacing 1 A B C D E F G H I J K L M 2 3 ◆ 4 ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ 1 ◆ ◆ ◆ ◆ 3 6 ◆ ◆ 7 ◆ 8 9 10 11 ◆ ◆ ◆ ◆ ◆ 12 ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ 2 5 ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ 4 ◆ 6 ◆ 8 5 7 ◆ ◆ ◆ 9 ◆ ◆ 10 11 A B C D E F G H I J K L M REMEDY Reset neutral, repair machine fault Eliminate source, use shock mounts, check balance bearings Increase air flow, remove restrictions Remove mica; turn or stone commutator Increase ventilation, lower ambient temperature Change brush grade (ask for our recommendation) Clean commutator, remove source of contamination Correct machine loading; repair control system Adjust pressure uniformly to recommended value Replace brushes, tighten lug connections Use alternate brush grade (ask for our recommendation) Clean & inspect holders; replace if necessary Adjust spacing, clearance, and/or angle to specifications 12 Troubleshooting guide courtesy of Stackpole Manufacturing Company Otis/Adams Motor Brush Cross-Reference Guide Otis part no. Adams part no. 240B3 240B4 240B6 240C1 240E4 240E8 240E10 240E14 240E16 O776 O777 O756 O775 O754 O755 O796 O790 O788 Otis part no. Adams part no. Otis part no. Adams part no. Otis part no. Adams part no. Otis part no. Adams part no. 240E17 240E18 240E22 240F3 GS240F3 240F4 240F5 240F11 GS240F11 O789 O792 O794 O759GX O759G O768 O767 O761G O761GX 240F12 240F15 240F19 240F20 240F21 240F22 240F23 240F25 240F26 O761C O783 O782 O762 O785 O759C O786 O761GX O759G 240F27 240G1 240G3 240H4 240J1 240J3 240P1 240P2 240P3 O769 O760 O758 O781 O774 O766 O772 O773 O764 240P4 240R1 240R3 240R5 240T5 240W1 240W3 240Y1 145094 O773C O757 O751 O765 O744 O752 O743 O753 O771 Otis part no. 184306 184448 186132 186133 186142 186206 186207 Adams part no. O740 O741 O771D O742 O763 O771C O771D If part number is not known, please provide any of the following: Frame/Generator number, machine number, voltage, brush holder part number, motor size and type, grade, dimensions, horse-power and kilowatts. Graphite is for higher speed machinery. www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 285 Otis Motor Brushes Adams part no. Dimensions Material (L x W x Thick) Door operator Otis part no. J2, J2A 6970 oper., 1/3hp (GE) 6970A oper., 1/2hp (GE) 186142 145094 186206 186132, 186207 Figure 1 O763 O771 O771C O771D O763 Figure 1 Carbon Carbon Carbon Carbon Adams part no. 5 /8" x 5/16" x 1/4" /16" x 1/4" x 1/4" 13 /16" x 1/2" x 1/2" 13 /16" x 3/8" x 1/4" 9 Material Dimensions (L x W x Thick) Otis grade Otis part no. Figure 2 O758 O760 Metal graphite Metal graphite 17/8" x 11/4" x 3/4" 11/2" x 1" x 1/2" OE-122 OE-122 240G3 240G1 Carbon Carbon Carbon Carbon Carbon Graphite 2" x 11/2" x 1/2" 2" x 11/2" x 1/2" 2" x 11/2" x 5/8" 2" x 11/2" x 1/2" 2" x 11/2" x 1/2" 2" x 11/2" x 1/2" OE-153 OE-151 OE-127 OE-150 OE-127 OE-116D 240W3 240W1 240B6 240R1 240B3 240B4 Carbon Graphite Graphite Carbon Graphite Graphite Graphite Graphite Carbon Graphite Graphite Graphite Graphite Carbon Carbon 2" x 1" x 3/8" 2" x 1" x 3/8" 2" x 1" x 3/8" 2" x 11/2" x 5/8" 2" x 11/2" x 5/8" 2" x 11/2" x 5/8" 2" x 11/2" x 3/8" 2" x 1" x 3/8" 2" x 1" x 3/8" 2" x 1" x 5/8" 11/8" x 1" x 1/4" 13/4" x 11/2" x 1/2" 2" x 11/2" x 7/8" 2" x 11/2" x 1/2" 2" x 11/2" x 5/8" OE-127 OE-130 OE-116D OE-117 OE-116D OE-130 OE-116D OE-118 OE-117 OE-130 OE-116D OE-116D OE-116D OE-127 OE-127 240F22 240F26 240F3 240F12 240F11 240F25 240F20 240F5 240F4 240F27 240C1 240F19 240F15 240F21 240F23 Carbon Graphite Graphite Graphite Graphite Graphite Graphite Graphite 2 3/4" x 11/2" x 5/8" 23/4" x 11/2" x 5/8" 23/4" x 11/2" x 3/8" 23/4" x 13/4" x 3/8" 23/4" x 11/4" x 3/8" 23/4" x 2" x 3/8" 23/4" x 13/4" x 3/4" 2" x 7/8" x 1/4" OE-117 OE-116D OE-116D OE-116D OE-116D OE-116D OE-116D OE-116D 240E4 240E8 240E16 240E17 240E14 240E18 240E22 240E10 Carbon Carbon Straight GraphiteStraight Carbon Graphite Bevel 2" x 1" x 3/8" 2" x 11/2" x 1/2" 2" x 11/2" x 1/2" 13/4" x 11/2" x 3/8" 13/4" x 11/2" x 3/8" OE-154 OE-151 OE-152 OE-140 OE-116D 240T5 240R3 240R5 240J3 240J1 Graphite Graphite Carbon/flat Carbon/slant 13/4" x 11/2" x 3/8" 13/4" x 11/2" x 3/8" 13/4" x 11/2" x 3/8" 13/4" x 11/2" x 3/8" OE-130 OE-116D OE-127 OE-127 240P3 240P1 240P2 240P4 Figure 3 O743 O752 O756 O757 O776 O777 O758 Figure 2 O743 Figure 4 Figure 3 O759C O759G O759GX O761C O761G O761GX O762 O767 O768 O769 O775 O782 O783 O785 O786 O759C Figure 4 O754 Figure 5 O754 O755 O788 O789 O790 O792 O794 O796 Figure 5 O744 Figure 6 Figure 6 O744 O751 O765 O766 O774 O764 Figure 7 Figure 7 O781 Figure 8 O753 Figure 8 286 O764 O772 O773 O773C O753 O740 O741 O740 O741 O742 O781 O742 Fax: 1-847-581-2949 • US: 1-800-929-9247 Double carbon with connecting bridge; 17/8" x 11/2" x 1/4" ( 1/2" thick overall); grade OE-151 For 500W 6390C MG sets; 11/8" x 5/8" x 3/8" carbon For “A” oper.; 1" x 5/8" x 1/4" carbon without shunt For “AB” operator; 7/8" x 3/4" x 1/4" 3" x 11/4" x 11/16" graphite; grade OE-116D • www.adamselevator.com 240Y1 184306 184448 186133 240H4 Otis Miscellaneous Carbons, Contacts, Brush Holders 107430 Otis Carbon Contact Holder for 2 1.4” O.D. contact 2 1/4” L, stem 5/8-11” x 1 13/16” 6134H1 Otis Carbon Brush Holder .38” W x 1.00” L, for 7/8” brush stem 288CD4 Otis Carbon Brush Holder Arm 306T2 Otis Contact Base 12136 Otis Carbon Brush Holder 1176 Otis Carbon Contact .97” O.D. x 1.50” L, used for switches & Magnets 6134A1 Otis Carbon Brush Holder (O705A) 6365E1 Otis Contact 140538 Otis Carbon Brush Holder 166747 Otis Carbon Contact 1.50” O.D. x 1.00” L 6134J1 Otis Carbon Brush Holder .50” W x 1.56” L, for 7/8” brush stem 6602A1 Otis Contact Brush www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 178T2 Otis Box Brush Holder 6839Y4 Otis Carbon Brush Holder (O335) 6825B1 Otis Contact Arm 287 Otis Door Interlocks/Type 6940 1: O800A1 (right 12 hand) shown SWITCH AND HOUSING FOR 6940 INTERLOCK 5 13 O830K1 (See following pages for replacement switch and switch components) O830K2 3 8 O830K-SERIES SWITCH & HOUSING 2 4 9 6 Adams part no. 10,11 1 (1) O800A1 O800A2 2 3 4 5 6 (6) 7 8 9 10 11 12 13 O801, 802 O803P-series O804E1 thru E5 O805 O806R1/L1 O809R1/L1 O807 O808 O808P1 O804W1 O804W2 O800R1 O800R2 Description Right-hand hook & release ass'y. Left-hand hook & release ass'y., (not shown) opposite of O-800A1 Bell crank lever Poly roller, 11/2" OD Eccentric pin Base contact Torsion spring Torsion spring, not shown Compression spring Rubber roller w/bushing, axle pin Axle pin Thick washer Thin washer Rubber bumper w/hole Rubber bumper w/stem Description Otis part no. O830K1 O830K2 Switch & housing, complete; right hand Switch & housing, complete; left hand 6940AG1 6940AG2 SWITCH AND HOUSING FOR OLD 6940A INTERLOCK O831K4 (See following pages for replacement switch and switch components) 6940 DOOR LOCK Key Adams part no. Otis part no. O831K-SERIES SWITCH & HOUSINGS Otis part no. 6940C1 Adams part no. Description 6940C2 307AE1, 2 456C1-C4 77A1-A5 306FM1 A92AG1, 2 A92AG1, 2 90HB9 456BT1 78C2 127L5 127L4 320AY1 320P4 O831K1 O831K2 O831K3 O831K4 Interlock assembly, RH; Interlock assembly, LH; Interlock assembly, RH; Interlock assembly, LH; plastic cover plastic cover steel case steel case For old style 6940A interlock OK800A1 & A2 DOOR INTERLOCK KITS OK-800A2 (left hand) OK-800A1 (right hand) Includes Adams part nos. O800A1 door lock O830K1 switch/housing Replaces Otis part no. 6940C1 6940AG1 Includes Adams part nos. O800A2 door lock O830K2 switch/housing Replaces Otis part no. 6940C2 6940AG2 ALSO AVAILABLE... 521V111-12 Otis Door Lock 288 Fax: 1-847-581-2949 6543C Otis Interlock 6047A2 Otis Interlock Switch Assembly • US: 1-800-929-9247 • www.adamselevator.com Otis Door Interlocks/Type 6940 Components O801 O801B1 O801B2 O804E1 (E2-E5 look similar) O801C1 Adams part no. O801 O802 O801B1 O801B2 O801C1 O801W3 O804E1 O804E2 O804E3 O804E4 O804E5 Description Bell crank lever, RH; shown Bell crank lever, LH; opposite of O-801 Roller bearing Outer face sleeve for bearing Retaining ring (circlip) Washer, 41/64" I.D. x 11/2" O.D. x 3/64" thick Eccentric pin, 219/32"L Eccentric pin, 2 7/32"L Eccentric pin, 211/32"L Eccentric pin, 2 1/2"L Eccentric pin, 2 5/32"L Otis part no. 307AE1 307AE2 209E1 — 172DE9 127VB83 77A4 77A2 77A3 77A1 77A5 O801W3 O803P1 DOOR LOCK ROLLERS (RUBBER & POLY) O803P2 O803P3 O803P4 Adams part no. O803P1 O803P2 O803P3 O803P4 Description Polyurethane roller with bushing, 11/2"L Polyurethane roller with bushing, 1 5/32"L Polyurethane roller with bushing, 19/32"L Polyurethane roller with bushing, 1 5/8"L Otis part no. — — — — Injection-molded polyurethane rollers outperform rubber/fiber core models. Dovetail flanges keep injection-molded poly tire attached securely to the molded nylon core. Cost less than rubber. O807 O809L1 O808 O808P1 O806R1 O800R1 O800R2 O805 Adams part no. O800R1 O800R2 O805 O806R1 O806L1 O807 O808 O808P1 O809R1 O809L1 O856 Description Rubber bumper with hole Rubber bumper with stem Base contact w/copper contact face Torsion spring, RH; 125/32" I.D. x 7/8" high Torsion spring, LH; 125/32" I.D. x 7/8" high Compression spring, 11/16" O.D. x 1 5/8"L Rubber roller, 1" dia.; with bushing, axle pin Replacement axle pin for O808 roller Torsion spring, RH; 115/16" I.D. x 5/8" high Torsion spring, LH; 115/16" I.D. x 5/8" high Door Bumper www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 Otis part no. 320AY1 320P4 306FM1 92AG1 92AG2 90HB9 456BT1 78C2 A92AG1 A92AG2 320BE2 289 Otis Interlocks/6940 & 6940A Components O830K COMPONENTS O830A1 O830B1 Adams part no. O830A1 Switch assembly, complete O830B1 O830C1 O830C2 Switch base (2 required) Formed strip w/silver contact, RH Formed strip w/silver contact, LH Description Otis part no. For 6940AG interlock switch 306JJ1 152BE2 152BE4 O830C2 O830C1 O831SERIES SWITCH & COMPONENTS O831D O831B1 Adams part no. Description O831A1 O831B1 O831C1 O831C2 O831D Switch assembly, complete Phenolic contact base Movable contact Stationary contact Insulator Otis part no. For 6940B interlock switch 306FX1 152AV2 152AW2 A275AR1 O831C2 O831C1 O831A1 N2 INTERLOCK COMPONENTS Adams part no. O816 O816S1 O832 Description Interlock assembly, complete Compression spring, 9/32" I.D. x 43/8"L Interlock switch base for O816 interlock assembly (2 required), w/formed leaf spring contact; for N and NC style interlocks. (Use with Adams O803series rollers and O804 series pins, shown on page 289) O832 O816 Otis part no. 6047A2 90BB14 A306EB2 O816S1 O817 “ ” L AND “LA” DOOR LOCK COMPONENTS O820 O820B O821A1 O820A1 O822R2 O821 Adams part no. O817 O820 O820B O820A1 O821A1 O821 O822R1 O822R2 Description Pivot arm assembly Contact holder, “L” door lock Base for door lock contacts Stationary contact assembly, “L” door lock Stationary contact assembly, “LA” door lock Contact holder, “LA” door lock Rubber roller, 1.22" O.D. x 0.593" wide; 0.337" bore Rubber roller, same as above with 335D bushing O822R1 290 Fax: 1-847-581-2949 • US: 1-800-929-9247 • www.adamselevator.com Otis part no. 147976 132037 151076 158492 156144 456AA1 456AA2 Otis Door Interlocks/Miscellaneous CHAIN, CUP, SPIRATOR A831 Adams part no. O813C1 O813C2 A831B O813C2 O815 O813C1 A831 A831B O815 Description Chain with hitch & link for 6940D spring door closer for double roller arm, 111/4"L Chain with hitch & link for 6940D spring door closer for single roller arm, 141/4"L Formed polyurethane cup for M.L. A6940 AD1 to AD3 door closer weight Heavyduty reeltype door closer (spirator); mounts on 5/16"sq. stud. (Also replaces Armor, Dover, G.A.L., Montgomery, Schindler, U.S., and Westinghouse Elevator spirators.) Mounting bracket for A831 spirator Otis part no. A332AS2 A332AS3 A325P1 152AW2 — CAM/CLAMP, MECHANICAL SWITCH Adams part no. O833A O833B O833 O833A O834A O834B O834A O833B O834B O667 — — 327DJ2C 6554B1 6554B2 O668 Adams part no. Description Otis part no. OB930* OB932* O667 O668 Nylon door gib, 2 7/8"L x 1/2"H x 15/32"W Nylatron door gib, 31/2"L x 3/4"H x 1/2"W Door lock bridge, 13/16" x 13/16" Door lock finger, 5 1/2"L — — 126646 126650 * Otis Britain door gibs HEAVYDUTY EXTENSION SPRINGS O812X Thermoplastic cam with 11/8" radius on upper surface, 5/16" radius on lower surface Diecast aluminum clamp for O833A cam Cam/clamp assembly, complete; includes one (1) O833A and one (1) O833B, above Mechanical switch (make) for Type 6970 door operator Mechanical switch (break) for Type 6970 door operator Otis part no. DOOR GIBS, BRIDGE, FINGER OB932 Adams part no. O811 O812 Description Description 15/8" dia. x 9"L, w/hook and 430AE1 link 11/2" dia. x 10"L, plus hook at each end; black oxide finish 13/8" dia. x 10"L, plus hook at each end; black oxide finish Wire dia. 1 /8" Active Otis turns part no. 31 91T8 3 51 91AE1 0.148" 60 91W2 /16" O811 O812 O812X www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 291 Otis Mechanical Switched/Floor Stop, Limit O841CM2 O841B5 O841A1 MECHANICAL SWITCHES Adams manufactures and stocks replacements for Otis Type 6098 and A6098 mechanical switches listed below. Rugged boxes match existing Otis installations, requiring no new drilling or rigging to fit. Boxes in each series are similar, differing only in the configuration of the switches inside. Single pole/break (1NC) Single pole/make (1NO) Double pole/break (2NC) Double pole/make (2NO) Double pole/single throw Single pole/double throw If you are going to replace an arm make sure you note the direction of the swing and the placement of the holes on the arm before you remove it. This will make it easier to order the correct replacement. See page 294 for a complete listing of replacement switch arms. LIMIT SWITCHES SWITCH CONFIG. ABBREVIATION LEGEND SPB SPM DPB DPM DPST SPDT Photographs on these two pages show representative boxes from each switch series. Box dimensions within each series are identical. The legend below left will tell you what our switch configuration abbreviations mean. Adams part no. Switch config. O841B1 O841B3 O841B5 O841B7 O841B9 O841B11 O841B13 O841B15 O841B17 O841B17A O841B18 O841B18A SPM SPB DPM DPB SPM SPB DPM DPB SPB† SPDT SPST† SPDT†† Replace. arm O840F4 O840F2 O840F4 O840F2 O840F8 O840F6 O840F8 O840F6 O840F2 O840F2 O840F6 O840F6 FLOOR STOP SWITCHES Otis part no. A6098B1 A6098B3 A6098B5 A6098B7 A6098B9 A6098B11 A6098B13 A6098B15 A6098B17 — A6098B18 — Arm shown shown shown shown opposite opposite opposite opposite shown opposite shown Adams part no. O841A1 O841A3 O841A4 Includes 1/NO auxiliary contact. Includes 1/NO auxiliary contact that MAKES during switchover of main contacts. Replace. arm O840E2 O840E2 O840E2 Otis part no. A6098A1 A6098A3 A6098A4 *Includes auxiliary contacts. **Contacts MAKE when roller moves left; maintained contact. ***Contacts MAKE when roller moves right; maintained contact. MECHANICAL SWITCHES Adams part no. † O841CM1 O841CM2 †† Switch config. SPDT* DPST** DPST*** Switch config. SPM SPM Replace. arm Otis part no. Avail. only on A6098CM1 special order A6098CM2 NOTE: O841CM1 arm configuration is opposite of that shown for O841CM2, photo above. ALSO AVAILABLE... 292 A6098B22 Otis Limit Switch AAA6098NM2 Otis Switch Fax: 1-847-581-2949 • US: 1-800-929-9247 • www.adamselevator.com Otis Mechanical Switches/Car Gate, Tripper O841D5 O841BC1 TRIPPER SWITCHES W/PLEXIGLASS COVER MECHANICAL SWITCHES Adams part no. O841BC1 O841BC2 O841BC3 O841BC4 O841BC5 O841BC6 Switch config. SPB SPM DPST DPST DPST DPST Replace. arm O840BA3 O840BA3 O840BA4 O840BA4 O840BA3 O840BA3 Otis part no. 6098BC1 6098BC2 6098BC3 6098BC4 6098BC5 6098BC6 O841E12 Adams part no. Switch config. O841D1 O841D3 O841D5 O841D6 SPB SPB DPB DPB Replace. arm O840H1 O840H2 O840H2 O840H1 Otis part no. 6098D1 6098D3 6098D5 6098D6 CAR GATE SWITCHES Switch config. Adams part no. O841E1 O841E2 O841E5 O841E6 O841E9 O841E10 O841E11 O841E12 SPM SPM DPM DPM SPM SPM DPM DPM Replace. arm Replacement arms for O841Eseries switches are available on special order only Otis part no. 6098E1 6098E2 6098E5 6098E6 6098E9* 6098E10* 6098E11* 6098E12* *Includes switch arm & weight. O841B5 with plate and arm removed NOTES: Switch arms for O841E1 thru E6 are mounted horizontally; E9 thru E12 are vertical, as pictured. Oddnumbered switches are right handed; evennumbered switches are left handed. REPLACEMENT SWITCH ARMS AVAILABLE www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 293 Otis Mechanical Switches/Arms, Contacts Used with O841Bseries limit switches, page 292. Hole positions in relation to arm LIMIT SWITCH ARMS Adams part no. Description Otis part no. O840F2 O840F2A O840F4 O840F6 O840F6A O840F8 Arm w/pin & roller, LH SPDT, RH Arm w/pin & roller Arm w/pin & roller, RH SPDT, LH Arm w/pin & roller 287F2 287F2A 287F4 287F6 287F6A 287F8 O840F8 O840F2 O840F4 O840F6 Used with O841Dseries tripper switches, page 293. TRIPPER SWITCH ARMS Adams part no. Description Otis part no. O840H1 O840H2 Arm w/pin only Arm w/pin only 287H1 287H2 O840H1 Used with O841BCseries mechanical switches, page 293. MECHANICAL SWITCH ARMS Adams part no. Description Otis part no. O840BA3 O840BA4 Arm w/pin only Arm w/pin & roller 287BA3 287BA4 O840H2 Otis part no. Adams part no. Description O840E2 Arm w/pin & roller A287E2 Adams part no. O27C4X O27C11 Leaf spring contact with double tip Stationary contact with silver tip /32" Otis part no. Description O897F1 Car door faceplate, female; 15"L O897F2* Car door faceplate, female; 69"L 23/8" — — *For O897F2 only, two females fit together. NOTE: These edges are for door operator 6970A. They are unmilled and undrilled. 23/16" O27C4X Otis part no. Description 21 DOOR EDGE SIGHT GUARD REPLACEMENT CONTACTS Adams part no. O840E2 O840BA4 ALSO AVAILABLE... Used with O841Aseries floor stop switches, page 292. FLOOR STOP SWITCH ARMS O840BA3 150H2 150H4 O27C11 294 Fax: 1-847-581-2949 • US: 1-800-929-9247 • www.adamselevator.com Door Edge Sight Guards Safety Edge Parts Otis Here is a comprehensive listing of replacements for Otis door edge sight guards (also known as door shields and door faceplates), for hoistway and car doors. Tough, impactresistant Butyrate plastic is extruded to form Adams replacement edges. We ship our edges without predrilled mounting holes, permitting installers to customfit each edge right on the job. bers: O890, O891, & O892 series have wide ribs; O893 series has narrow ribs with 3/32" between crowns. Other models include O896series for Otis Type 6970 door operator installations; O897series for Otis Type 6970A; O895 for Otis Type AB. Refer to the drawings and tables for accurate dimensions and Otis part numbers. Views are all cross sections and not to scale. Wide and narrowribbed models are identifiable by their part num- 1 5 /8" 5 /8" /8" SAFETY EDGE REPLACEMENT PARTS 21/32" 21/8" 23/8" Adams part no. O890R O890L O890R1 O890L1 O850D1 23/8" Description Otis part no. Hoistway door shield, RH; 84"L, face milled for floor no. Same as O890R, LH (shown) Same as above, 831/2"L; RH Same as O890R1, LH (shown) 278BG2 278BG3 278BG10 278BG11 Adams part no. O893R O893L Description Otis part no. Hoistway door shield, RH; 84"L, narrow rib, milled Same as above, LH (shown) 278BG2 278BG3 H5317 O850M1 O850S1 O850SERIES COMPONENTS 47 2" 1 /64" 13/8" 5 /8" 217/32" Adams part no. Description Otis part O850M1 O850D1 O850S1 H5317 Microswitch Dash pot (door check) Spring, 41/4"L x 1/2" Coil 177AR1 6168F1 90HB11 222CY1 13/32" O855 SERIES COMPONENTS Adams Description part no. O892M1 Car door faceplate, male; 151/4"L O892M2 Car door faceplate, male; 683/4"L Otis part no. 147FB1 147EY1 Adams part no. Description O896F1 O896F2 Car door faceplate, female; 141/4"L Car door faceplate, female; 693/4"L Otis part no. — — NOTE: These edges are for door operator 6970. They are unmilled and undrilled. Adams part no. O461A2 O855L3 O855R3 Description Otis part no. Single BREAK switch (see photo on page 270) Retracting assembly, LH Retracting assembly, RH 7035A25 — — O852S1 Compression spring; replaces Otis part no. 90EB16. RIGHTHAND VS. LEFTHAND Standing inside the car and facing the hall, LH door opens to the LEFT www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 RH door opens to the RIGHT 295 Otis Springs Replacement extension, compression, & torsion springs HEAVYDUTY EXTENSION SPRINGS Adams part no. O811 O812 O812X Description 15/8" dia. x 9"L, with hook and link 11/2" dia. x 10"L, with hook at each end; black oxide finish 13/8" dia. x 10"L, with hook at each end; black oxide finish Adams part no. O.D. O24S1 17 Length Wire dia. O811 Otis part no. Active turns 31 91T8 /16" 51 91AE1 0.148 60 91W2 Wire dia. 1 /8" 3 Active turns Otis part no. O812 O812X O24S1 O21S2 O21S1 O850S1 EXTENSION SPRINGS O850S1 21 /32" coiled; 15/32" overall w/21/4" loops 0.018" 41/4" 0.055" /64" 31 /64" 30 32 91B1 90HB11 11 /32" /8" 19 /64" 5 /16" 21 /64" 15 /32" 5 /16" 1 /4" 21 /64" 1 /2" 5 /16" 17 /64" .523" ±.009" .510" ±.010" .580" ±.005" 21 /32" 19 /64" 9 /32" 13 /16" 9 /32" 9 /32" 1 /2" to 15/64" 15/8" 1.702" ±.015" 1.702" ±.015" 1.550" ±.015" 1.080" ±.015" 1.136" ±.015" 11 /16" 23 /64" 11 /32" 7 /16" 3 1" /32" 9 /16" 57 /64" 11/16" 11/8" 39 /64" 5 /16" 25 /32" 1" 13/16" 9 /16" 11/8" 11/8" 111/16" 11/4" 13/16" 15/16" 1" 5 /8" 5 /8" 3 /4" 11/2" 13/8" 13/8" 11/8" 1" 1" 15/8" 43/8" 11/16" 23/4" 27 0.022" 0.025" 0.020" 0.025" 0.029" 0.047" 0.041" 0.021" 0.035" 0.065" 0.029" 0.024" 0.042" 0.035" 0.041" 0.033" 0.013" 0.022" 0.035" 0.020" 0.020" 0.020" 0.080" 0.071" 0.071" 0.067" 0.041" 0.037" 0.055" 0.041" 0.029" 0.047" 10 7 7 6 9 61/2 7 3 7 7 9 5 8 6 9 4 11 7 2 6 6 6 2 3 3 21/2 2 11/2 7 42 10 26 90LA4 90TA6 90KA3 90TA3 90VA16 90EB5 90BB19 90LA11 90YA25 90KB14 90VA15 90PA4 90DB4 90YA13 90BB8 90XA14 90GA2 90LA5 90YA26 90KA 90KA5 90WE14 90SB7 90MB4 90MB4 90LB1 90BB3 90AB8 90HB9 90BB14 90VA8 90EB16 61/4 91/4 91/4 83/4 83/4 92A4 92AG1 92AG3 A92AG1 A92AG2 296 0.078" 0.0915" 0.0915" 0.062" 0.062" Fax: 1-847-581-2949 • O22S2 O22S6 O22S3 O22S7 O22S8 O23S3 O293S1 O461S1 O461S2 O22S4 O22S9 O370S1 O23S2 O23S1 O375S1 O454 O572S O573S, O573B O577 O831S1 O480S1 O575 O576 O816S1 O807 O700S1 O852S1 8608 O806L1 O806R1 TORSION SPRINGS 23 5 O700S1 /32" /8" O806R1 125/32" x 11/16" wide, RH O806L1 Same as above, LH O809R1 115/16" x 5/8" wide, RH O809L1 Same as above, LH * Same as O573S, except made from brass. O22S1 O22S5 COMPRESSION SPRINGS O21S1 O21S2 O21S4 O22S1 O22S2 O22S3 O22S4 O22S5 O22S6 O22S7 O22S8 O22S9 O23S1 O23S2 O23S3 O293S1 O370S1 O375S1 O454 O461S1 O461S2 O480S1 O572S O573B* O573S O575 O576 O577 O807 O816S1 O831S1 O852S1 O21S4 US: 1-800-929-9247 • O809R1 www.adamselevator.com O809L1 Otis Door Keys Hoistway Emergency Door Keys New key Value Pak unlocks the door(s) to efficiency O825C Door Key Value Pak O825B Put every door key you’ll ever need into your toolbox...and save compared to the cost of buying them individually. O825A W824T W824L KVP840 Key Value Pak opens doors to increased productivity. G840 G841 This sevenpiece Value Pak includes keys for Dover, GAL, Otis, and Westinghouse. Helps you streamline every service route by equipping each mechanic for the unexpected. KVP840 Door Key Value Pak HOISTWAY EMERGENCY DOOR KEYS O825C O826L1 O826C1 Adams part no. O825A O825B O825C 199015 O825A Description Emergency door key, twosection Emergency door key, threesection, 7.593" L Emergency door key, lunar; 10 1/2"L Car Door Key Otis part no. 194AD3 194AD7 194AD2 — HOISTWAY DOOR EMERGENCY KEY DEVICE O825B O826B1 Adams part no. O826B1 O826C1 O826L1 O826K1 Description Otis part no. Stainless steel escutcheon, 2 3/4"L x 1/2" dia.*, Lip 5/8" dia. Push nuts, 10/pkg.; (1 incl. w/O826B1) Lever Emergency kit, complete; one of each, above 321CV1 72CE9 — 288LS1 *Includes one (1) push nut as shown; replacements available (O826C1), 10/pkg. 199015 Otis Car Door Key www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 297 Otis Copper Contacts Quality forged into every contact At Adams, we machine our own copper contacts from copper forgings, a process that improves conductivity and minimizes arc and burnout. Forged under tremendous pressures, the maximum amount of metal possible is pressed into the space available. This produces highdensity contacts of exceptional strength. Our contacts are machined to fine tolerances for a true flat contact plane. The crossreference table at right lists each Adams replacement contact and the related accessory components. Please refer to this table for ordering. COPPER CONTACTS AND RELATED COMPONENTS Adams part no.* O1 O2 O3 O4 O5 O7 O8 O9 O11 O12 O15 O16 O17 O18 O19 Otis part no.* 1189 113903 1191 114228 1558 1561 1387 1383 1559 1555 1374 13234 106569 13417 106578, 106571 1528 O32 O33 Carbon Insulator Spring Washer CX31C9 CX31C15 CX31C15 CX31C15 CX31C21 CX31C22 CX29C4 CX29C4 CX31C22 CX31C20 CX29C3 CX31C21 CX31C19 CX31C20 CX31C1 L7 O576 O554 L7 O576 O554 O554 O35 1493 O39 107042 O42 112000 CX31C2 O45 1539 CX31C8 * Copper contact part no. only Adams part no. O1 O2 O3 O4 O5 Contact head Dia. Thick 7 /8" 11/8" 11/8" 11/8" 21/2" 1 Overall stem length 23/8" 15/16" 27/16" 23/16" 115/16" /4" 1 /4" 1 /4" 1 /4" 3 /8" Stem, smooth Dia. Length 7 /16" — 7 /16" 7 /16" — 13/8" 1 /8" 15/16" 1" 5 /16" /1618 3 /816 5 /1618 5 /1618 1 /213 1" 13/16" 11/8" 13/16" 15/8" O7 O8 O9 O11 O12 Contact head Dia. Thick 3 21/2" /8" 2"x11/2" 3/8" 2"x11/2" 3/8" 21/2" 2" 3 3 /8" /8" Overall stem length 213/16" 29/16" 111/16" 31/2" 35/16" Stem, smooth L3, L10 L4, L10 O108 O573S L5 L17, L18 L5 L21 O573S O576 O573S Thread 1 /213 1 /213 1 /213 Length 11/4" 23/16" 15/16" 5 1 11/2" 17/16" /8" /8" 5 2" 17/8" O100 O102 O191 O192 O557 O551 O119 O557 O550 L18 O557 O551 O559 O576 O119 O5 O4 O3 O2 1 /213 /213 O11 Fax: 1-847-581-2949 • US: 1-800-929-9247 O12 O9 O7 298 O557 O554 Stem, threaded Dia. Length /8" 111/16" 1 /2" sq. 3/8" 1 /2" sq. 3/8" 5 Distance piece O108 O108 L3, L10 Stem, threaded Thread Length 5 Carbon holder O557 O1 Adams part no. Nut • O8 www.adamselevator.com Otis Copper Contacts O18 O19 11/2" sq. 3 21/4" O16 21/4" 3 27/8" 9 /8" 2" 3 O19 5 3 O32 O45 O42 screwdriver slot /8" /8" 1 7 /16" 1 15/16" 1 13/4" 3 11/8" 11/4" /2" sq. /2" /816 2 /16" 1 /16" 5 27/8" 1 13/4" 3 11/8" 1 3 1 /2" /16" /2" 5 /213 7 1 /16" O35 O33 O78 Contact head Dia. 3 /4" O33 1" O35 3 O39 3 O42 5 O45 3 3 /16" /4" /1618 /816 /224 /4" /4" /4" /8" 1" Thick Overall stem length 3 /16" 1 11/16" Stem, threaded Thread Length 5 /16" 1 3 1" /8" 11 3 11/16" /16" /816 /4" 1 /4" 3 /16" 11/16" — 3 /16" 3 7 — 1 /8" 3 11/8"* 1 1 /8" 1 11/8" 1 3 11/8" 3 1 3 Stem, smooth Dia. Length 1 /4" 1 /4" /16" 11/4" 3 1 /4" 5 2 /8" /4" 3 /8" /16" 1 /2" /816 /816 /816 /420 /816 /8"* *Screwdriver slot in end of threaded stem. Adams part no. O68 O69 O78 O68 1 /4" O18 Adams part no. screwdriver slot O32 /8" 3 Stem, threaded Thread Length O17 O16 O15 /8" 3 Stem, smooth Dia. Length Overall stem length O15 O17 O39 Contact head Dia. Thick Adams part no. Description Copper finger for starter Copper contact for starter; 11/8" wide x 19/16"L with 3/8" hole Copper angle, 11/8" x 7/8" x 3/4" wide; 1/4" thick Otis part no. 137709 137727 134514 O69 You can buy the frequently used copper/carbon combo of O16 (above) and CX31C21 (on next page) in convenient paks of 50 each. OVP2801. 50 ea. O16 & CX31C21. www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 299 Otis Carbon Contacts Carbon Contacts Style #32: Cylindrical w/o notch Style #36: Trapezoidal w/notch & chamferred bottom edges Style #29: Trapezoidal w/ notch & chamferred bottom edges Style #31: Cylindrical w/notch Style #35: Cylindrical w/45° chamferred edges Style #33: Cylindrical w/45° chamferred edges CARBON STYLE #31 CARBON STYLE #32 Adams part no. CX32C1 CX32C2 CX32C3 CX32C4 CX32C5 CX32C6 CX32C7 CX32C8 CX32C9 CX32C11 CX32C12 CX32C13 CX32C15 CX32C16 CX32C17 CX32C18 CX32C19 CX32C20 CX32C21 CX32C22 CX32C23 CX32C24 CX32C25 CX32C26 CX32C27 CX32C28 CX32C29 CX32C30 CX32C32 300 Diameter x Length 1 5 /2" x /8" /2" x 7/8" 1 /2" x 3/4" 3 /4" x 3/4" 3 /4" x 7/8" 3 /4" x 1" 3 /4" x 11/2" 7 /8" x 3/4" 7 /8" x 7/8" 7 /8" x 11/2" 1" x 5/8" 1" x 3/4" 1" x 1" 11/8" x 11/4" 11/4" x 1" 11/4" x 11/2" 11/4" x 15/8" 11/4" x 2" 11/2" x 3/4" 11/2" x 1" 11/2" x 11/4" 11/2" x 15/8" 11/2" x 2" 2" x 1" 2" x 11/16" 2" x 11/4" 2" x 11/2" 2" x 15/8" 21/2" x 11/4" 1 Adams part no. Diameter x Length CX31C1 CX31C2 CX31C3 CX31C4 CX31C5 CX31C6 CX31C7 CX31C8 CX31C9 CX31C10 CX31C11 CX31C12 CX31C13 CX31C15 CX31C16 CX31C17 CX31C18 CX31C19 CX31C20 CX31C21 CX31C22 1 1 /2" x /2" /2" x 3/4" 1 /2" x 1" 5 /8" x 1/2" 5 /8" x 5/8" 5 /8" x 3/4" 5 /8" x 1" 3 /4" x 3/4" 3 /4" x 7/8" 3 /4" x 1" 3 /4" x 11/2" 7 /8" x 3/4" 7 /8" x 7/8" 1" x 3/4" 1" x 7/8" 1" x 1" 1" x 13/16" 11/2" x 3/4" 13/4" x 13/8" 2" x 11/16" 21/4" x 13/8" 1 CARBON STYLE #29 & #36 Adams part no. Top Dimensions Bottom 15 /16" x 13/16" 1" x 2" 11/2" x 11/2" 11/2" x 2" 2" x 2" 1" x 1" 2" x 11/2" CX29C1 CX29C2 CX29C3 CX29C4 CX29C5 CX36C2 CX36C5 Thick 13/16" x 13/16" 17/16" x 2" 2" x 11/2" 2" x 2" 21/2" x 2" 11/4" x 1" 21/2" x 11/2" CARBON STYLE #33 Adams part no. CX33C1 CX33C2 Diameter x Length 5 /8" x 2" /8" x 11/2" 7 3 /4" 1" 1" 1" 1" 7 /8" 1" FOR LIST OF MATCHING COMPONENTS. • US: 1-800-929-9247 • Square on top, chamferred on bottom CARBON STYLE #35 Adams part no. CX35C3 CX35C5 SEE TABLE ON PAGE 298 Fax: 1-847-581-2949 Edge shape www.adamselevator.com Diameter x Length 3 /4" x 1" 11/2" x 21/2" Carbon Holders, Washers, Nuts, Springs Otis Carbon Holders O108 O102 O101 O119 Carbon size Stem dia. x length 5 /8" dia. 1" dia. 11/2" dia. 2" dia. 21/4" dia. 1 O192 O150 O138 CARBON HOLDERS Adams part no. O119 O101 O102 O100 O108 O191 O190 O100 CARBON STARTER, CARBON HOLDER Otis part no. 141436 103623 105936 108713 106183, 106184 /4" x 11/4", 1/420 threads /8" x 2" 3 /8" x 11/4" 1 /2" x 13/4" 5 /8" x 35/8" 3 Adams part no. O138 O150 Description Carbon starter for O68 copper contact Carbon holder w/carbon; 11/2" x 11/2" face; holes 2" center to center Otis part no. 137726 4SW3 DISTANCE PIECES Adams part no. O190 O191 O192 Dia. 1" 7 /8" 5 /8" Hex Length 21/8" 15/8" 1" Stem Thread Length 5 /811 31/2" 1 /213 31/2" 3 /816 31/4" Head tap Depth Thread 5 /811 13/4" 1 /213 11/2" 3 /816 1" Otis part no. 127782 126229 127850, 118716 Washers, Nuts & Springs WASHERS, NUTS & SPRINGS Adams part no. O550 O551 O554 O555 O556 O557 O559 O571 O574 O575 O576 O577 O578 O582 O584 Type of part Description 9 Copper washers Nuts Springs /16" OD copper washer /4" OD copper washer 3 /4" OD x 9/16" ID copper washer 5 /811 brass jam hex nut 1 /213 brass jam hex nut 3 /816 brass jam hex nut 1 /420 brass jam hex nut Bronze hour glass spring Compression spring, 11/2"L Compression spring, 11/8"L Compression spring, 1"L Compression spring, 1"L Steel spring for Type G switch Compression spring, 23/4"L Compression spring, 21/4"L 3 Otis part no. 127F17 127F12 127F48 68A6 68A5 68A3 68A9 — — 90LB1 90BB1 90AB8 92Y1 — 90JB13 O551 O556 O574 www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 O578 O582 301 Insulators, Bushings, Washers Rail Gibs/Cast Iron Otis L4 L5 L3 Insulators L27 L18 L7 L21 L17 L10 BAKELITE BUSHINGS WITH BRASS SLEEVES Adams part no. L3 L4 L5 L7 L17 L21 Shoulder (dia. x thick.) 15/16" x 1/8" 13/8" x 1/8" 15/16 x 1/8" 15 /16" x 1/16" 1" x 1/16" 3 /4" x 1/16" Base (dia. x thick.) 21/2" x 1/4" 2" x 1/4" 21/4" x 1/4" 11/2" x 3/16" 13/4" x 3/16" 15 /16" x 1/8" Stem Bore Brass 115/16"L x 27/32" dia. 115/16"L x 27/32" dia. 13/16"L x 27/32" dia. 15 /16"L x 21/32" dia. 7 /8"L x 21/32" dia. 1 /2"L x 1/2" dia. 5 Used with Adams copper contacts O7, O11 O12 O16, O18 O1, O3 O17 O18 sleeve ✓ ✓ ✓ ✓ ✓ ✓ /8" dia. /8" dia. 1 /2" dia. 7 /16" dia. 7 /16" dia. 5 /16" dia. 5 Otis part no. 18045 18038 13416 114230 106572 106577 WASHERS Adams part no. L10 L18 L27 Material Dimensions Canvasbase phenolic Bakelite Fibre 11/2"dia. x 1/4" thick 11/4" dia. x 1/4" thick 1" dia. x 1/8" thick Bore Counterbore 5 7 7 7 /8" dia. /16" dia. 3 /8" dia. Rail Gibs For heavyduty passenger or freight installations, milled and machined rail gibs. /8" dia. x 1/8" deep /8" dia. x 1/8" deep n/a Used with Adams copper contacts O7, O11, O12 O17, O45 — Otis part no. 10758 807927 10793 Heavyduty cast iron rail gibs from Adams stand up to the rigors of heavy daily elevator use Each gib has special features which give it unique operating properties. O908 has verticalribbed heavyduty sidewalls and is smoothly machined to permit easy rail glide. O909A and O909B are made from Zamak12™ easyglide rustproof alloy, and are milled to minimize rail resistance in freight installations. O910 O909B And O910 combines a low profile with extra length for low friction and maximum bearing surface. Packed and shipped in oil to prevent corrosion. Adams part no. O908 O909A O909B O910 302 Rail type Main rail gib, cast iron Highspeed rail, Zamak12 Highspeed rail, Zamak12 Bottom shoes, cast iron Length 81/2" 12" 81/2" 12" Dimensions Width Height 111/16" 11/2" 25/16" 21/2" 25/16" 21/2" 111/16" 11/2" Fax: 1-847-581-2949 • O909A Slot (DxW) 1" x 5/8" 2" x 11/4" 2" x 11/4" 1" x 5/8" O908 US: 1-800-929-9247 • www.adamselevator.com Otis Rail Gibs/Nylon Waffletruss design rail gibs for longer lasting Rail Gibs Crisscross “waffle truss” gives Adams rail gibs the strength they need to outlast and outperform ordinary gibs We strengthened the side walls with a powerhouse design, using two polymer materials with just the right performance characteristics. . .and our superperforming gibs are priced far less than you’d expect. We call our design “waffletruss” reinforcing. It’s similar to the design used to strengthen railroad trestles. Horizontal and vertical support members are molded right into each gib. Each member resists compression and torsion for smooth gliding along the guide rail. ZYTEL™ NYLON™ GIVES EXCELLENT SERVICE Each gib is available in your choice of two outstanding polymer products. The white gibs are made from DuPont Zytel Nylon. Zytel gibs run quietly and absorb shock and vibration, and its lowfriction properties promote cool running, long life. CHOOSE NYLATRON™ FOR BEST PERFORMANCE O906 If you believe that elevators should be seen and not heard, then Nylatron gibs should be on your shopping list. Black Nylatron (from The Polymer Corporation) generates 20% lower friction than its Zytel cousin. This highperforming material will outlast Zytel by up to 50% because it’s got a lubricant impregnated right into the polymer. This means that if normal lubricating service is interrupted, the Nylatron gibs will run dry for a limited time on their own lubricant...until additional lubricant can be applied...without damage to the gib or the rail. O902 O901 O903 O904 RAIL GIBS ORDERING INFORMATION Adams part no. O901 O902 O903 O904 O906 Type Material 8# rail 8# rail 8# rail 8# rail 15# rail Nylon Nylatron Nylon Nylatron Nylatron Dimensions Length Width Height 81/2" 81/2" 51/2" 51/2" 81/2" 111/16" 111/16" 1 3/8" 1 3/8" 111/16" 11/2" 11/2" 13/8" 13/8" 23/8" OEM part # Epco Esco Dover Slot (DxW) 1" x 5/8" 1" x 5/8" 1" x 5/8" 1" x 5/8" 1 7/8" x 5/8" 9233905 R RG W WG RHG Otis 3046006 380AJ1 3046019 380AP1 380AH1 NYLATRON® GUIDE SHOES OB903A (3 pcs.) Adams manufactures these direct replacements for Britishtype rail gibs, made from selflubricating Nylatron. OB904 Blackcolored Nylatron is impregnated with molybdenum that permits temporary dry running with safety. Nylatron has 20% less friction than conventional Nylon®, and has 50% greater wear capacity. Its stiffness, hardness and abrasion resistance are superior. Our Britishtype gibs are used throughout the U.K., in Europe, and in some U.S. elevator installations. Order replacement gibs individually, or in convenient, moneysaving sets of three. See table below to order. OB903 Chamferred edges on glide surface promote smooth, chunkfree running GUIDE SHOES (INDIVIDUAL AND SETS) OB901 OB902 OB903 OB904 OB901A OB903A OB902 Dimensions Adams part no. Width Length 11 4 /16" 11 4 /16" 5 29/32" 29 119mm 31 /32" 25mm 119mm 151mm 5 /8" 13/16" 16mm 30mm 25 19mm 5 /32" 151mm /32" Contains 2 pc. OB902, 1 pcs. OB901 Contains 2 pcs. OB903, 1 pc. OB904 Nylatron—Reg. TM The Polymer Corporation OB901 Buy Adams authentic guide shoes individually or in convenient 3piece sets www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 OB901A (3 pcs.) 303 Otis Rail Gibs/Door Gibs O678 OB930 W905N OB932 DOOR GIBS NYLON DOOR GUIDE Nylon and Nylatron replacements for Britishtype door gibs are in stock and available from Adams. Three types. Use this steel & nylon assembly for current model passenger and freight elevators. Steel mounting clip is offset 1/2" with 21/8" mounting hole centers; overall 7/16" x 7/16" x 4". Direct replacement for springloaded door guide. Replaces Otis part no. VP869750. BRITISHTYPE DOOR GIBS Adams part no. Material OB930 OB932 Nylon Nylatron Dimensions Length 27/8" 31/2" 73mm 89mm O678 Nylon door guide, complete. Width 15 1 /32" /2" 12mm 12mm W905N Replacement nylon guide (Otis part no. 237GAN). MISCELLANEOUS DOOR GUIDE ACCESSORIES 251BJ1 Otis Gib Insert 470P2 Otis Guide Shoe 380BS2 Otis Door Gib Insert 6.32”L x 1.00”W x .50”D 385B1 Otis Door Gib Insert 470P1 Otis Guide Shoe, 3.5” Hub, 2.49” Bore Fax: 1-847-581-2949 7593B3 Otis Door Guide 6884 Otis Shoe 7593B4 Otis Door Gib Assy 8” L x 1.20”W 7593B2 Otis Door Gib Assy 8” L x 1.25”W 304 380Av1 Otis Rail Gib • US: 1-800-929-9247 • www.adamselevator.com Otis Printed Circuit Boards A8110A5 Floor function board A8110A1 Floor function board A8111B3 Group function board B8111A3 Group zone function board FLOOR FUNCTION Part No. A8110A1 A8110A3 A8110A4 A8110A5 GROUP FUNCTION Part No. A8111B3 A8111B4 A8111B7 B8111A1 B8111A3 B8111C1 B8111C2 B8111C3 Description Group function board Group function board Group function board Group zone function board Group zone function board Group zone function board Otis printed circuit board 792 Group zone function board Description Floor function board Floor function PCB Floor function board Floor function board A8121AL24 Timer printed circuit board A8121AL2 Timer printed circuit board TIMER BOARDS A8121D1 Otis relay driver A8121D2 Otis relay driver Part No. A8110B1 A8121AL2 A8121AL24 A8121AL4 C8112B3 Description Timer/Door operator board Timer printed circuit board Timer printed circuit board 5 Timer printed circuit board Timer PCB Supplementary Interface RELAY DRIVER Part No. A8121D1 A8121D2 A8121D3 Description Otis relay driver printed circuit board Otis relay driver printed circuit board Otis relay driver printed circuit board A8114C5 Car/floor/inter board A8121E3 Double gong A8114D1 Car/floor/select board CAR , FLOOR SELECT Part No. A8114B1 A8114B2 A8114B4 A8114C5 A8114D1 Description Car/floor/inter/select board Car/floor/inter/select board Car/floor/select board Car/floor/inter/board Car/floor/select board A8121E4 Double gong GONG BOARDS Part No. A8121E3 A8121E4 Description Double gong board Double gong printed circuit board www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 305 Otis Printed Circuit Boards C8112B1 Car Variable #2 PCB for LRV3 Main Processor B8112A3 Car Variable PCB A8116B3 Hall call HALL CALL CAR VARIABLE Part No. A8112C10 A8112C12 B8112A3 B8112B1 C8112B10 C8112B1 A8116A7 Hall call Part No. A8116A7 A8116B3 Description Car variable board Car variable board Car Variable PCB Old #1Y088B1 Car Variable #3 PCB Car Variable #3 PCB Car Signal Interface Car Variable #2 PCB for LRV3 Main Processor Description Hall call printed circuit board Hall call printed circuit board A8113C1 Hy/Zone/Traffic car function board A8111B4 Traffic/group zone board TRAFFIC ZONE Part No. A8113B2 A8113B4 A8113C1 A8113H1 Timer, MG shut down board Description Traffic zone board Traffic/group zone board Hy/Zone/Traffic car function board MG TIMER Part No. Description A8113H1 Timer,MG shut down board A8113H3 Timer, MG shut down board A8114AA7 Supp interface function SUPP INTERFACE Part No. A8114AA10 A8114AA7 A8111D2 Car Function board Description Supp interface function board Supp interface function board A8114G1 Car signal interface board A8113F3 Group up peak board pcb A8113F1 CAR FUNCTION Part No. A8111D2 A8114G1 306 UP PEAK BOARDS Description Car function board Car signal interface board Fax: 1-847-581-2949 Part No. A8113F3 A8113G2 A8113N9 A8113P7 • US: 1-800-929-9247 Description Group up peak board pcb A8113F1 Up peak car function board Carup peak board Carup peak board • www.adamselevator.com Otis Printed Circuit Boards E8121BE1 Hall Interface Module PCB for LRV4 A8113R1 Group Emergency A8114D2 Digital readout board DIGITAL READOUT Part No. A8114AB1 A8114D2 Description Digital readout board Digital readout board A9708AB1 MRV control board A8123C3 Group express service A8121P1 Component EXPRESS Part No. A8112E1 A8123C3 Description Express priority board Group express service board B8121BA2 Power Supply PCB for LRV A8201T1 Power Supply POWER SUPPLY Part No. A8201T1 B8121BA2 Description Power supply printed circuit board Power Supply PCB for LRV 4 B8121AX1 Relay PCB for LRV 4 A8121AW1 Main processor board LRV3 MISCELLANEOUS Part No. A8112D1 A8113R1 A8114E1 A8114E5 A8114F1 A8115A1 A8115B2 A8121AW1 A8121P1 A8124AL1 A820P1 A9708AB1 B8113K1 B8113K5 B8114G1 B8115B4 B8121AX1 C8114G1 E8121BE1 Description Emergency power operation board Group Emergency power board Printed circuit board “CALL” Car/floor/mec/adv board Electronic touch reset board Group interface board Group power protection board Main processor board LRV3 Component printed circuit board Special service printed circuit board Operator printed circuit board MRV control board Success MG PCB Success MG Start PCB Car signal interface PCB PCB Relay PCB for LRV 4 Car Signal Interface PCB Hall Interface Module PCB for LRV4 www.adamselevator.com • Int'l (+1) 847-965-0700 • Canada: 800-268-5392 307 Notes __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ __________________________________________________________________________________________ 308 Fax: 1-847-581-2949 • US: 1-800-929-9247 • www.adamselevator.com
advertisement
Key Features
- Replacement relays
- A6164BP, 7058B, 6754 series
- DC magnet switches
- Repair paks
- Complete replacements
- Component parts
Related manuals
Frequently Answers and Questions
What are the replacement parts for Otis A6164BP relays?
The document details replacement parts for Otis A6164BP relays. It includes part numbers for items such as the armature, contact base, magnet core, compression springs, and shunt. It also specifies the types of coils available, such as general-purpose, self-holding, and condensor-timed. The document can help you to identify specific parts and order replacements from Adams Elevator.
What are the types of coils available for Otis A6164BP relays?
The document lists various types of coils, including general-purpose, self-holding, and condensor-timed. The coils are categorized by the number of making and breaking contacts and the type of lead configuration, such as 2-lead, 3-lead, and 4-lead. The document provides a table with specific part numbers and Otis part numbers for each coil type.
What are the replacement parts for Otis 7058B relays?
The document provides a complete list of replacement parts for Otis 7058B relays. It covers parts like the contact arms, plug-in bases, compression springs, and replacement coils. The document details the type of contacts, their dimensions, and the Otis part numbers for each component. You can use this information to source replacement parts.
What are the replacement parts for Otis 6754 relays?
The document provides detailed information on replacement parts for various models of Otis 6754 relays. It includes specific parts for the 6754, A6754, B6754, C6754, and E6754 relays. This information is presented in the form of part numbers, descriptions, and schematics. The document can be a valuable resource for identifying and ordering replacement parts for Otis 6754 relays.
Download
PDF
advertisement