windham console table

style # WNCNSLTBBK (black) dpci # 249-16-0818 tcin # 14122480 style # WNCNSLTBRD (red) dpci # 249-16-0819 tcin # 14122481 style # WNCNSLTBGY (gray) dpci # 249-16-0816 tcin # 14373228 style # WNCNSLTBWH (shell) dpci # 249-16-0815 tcin # 14372248 style # WNCNSLTBBL (teal) dpci # 249-16-0817 tcin # 14373265

>> assembly instructions

© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.

2

Congratulations on your latest Target purchase.

Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.

All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in no time. Good luck—though we’re confident you won’t need it.

before you begin

1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.

2. Use the carton as a working surface to prevent product damage during assembly.

3. Read through and review assembly steps.

4. Gather all tools prior to assembly.

tools needed

table of contents

introduction

hardware

parts list

how to use the cam lock system

assembly

5

6

2

4

7-15

QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling. 3

4

hardware

(H1) x 16 wooden dowel

(H2) x 18 cam bolt

(H6) x 2 knob

(H11) x 2

5/8” washer

(H7) x 1 wall strap

(H3) x 18 cam

(H4) x 12 flat-head screw

(H8) x 1

38mm wall screw

(H9) x 1 wall anchor

(H5) x 2 knob bolt

(H10) x 1

15mm truss head screw

exploded diagram

J

K

L

M

H

I

F

G

ITEM DESCRIPTION QUANTITY

A top panel 1

B

C

D right side panel left side panel back panel

1

1

1

E shelf 1 drawer face drawer bottom top trim drawer back drawer right side drawer left side drawer support bottom trim

1

1

2

1

1

1

1

1

5

how to use the cam lock system

Screw cam bolt into panel Align cam bolt(s) with cam(s) and insert all the way into cross-bored hole(s)

Push cam into panel - arrow feature on cam top points to panel edge

6

Rotate cam(s) clockwise 180° to lock panels together

Panels should be tight against each other and connection should be rigid

step 1: attach shelf/back panel/top and bottom trim to left side panel

(H1) x 3 wooden dowel

(H2) x 5 cam bolt

(H3) x 5 cam

Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.

1.2. Screw-In cam bolts must be screwed down flush.

1.3. Refer to page 6 for instructions on how to use the cam lock system.

7

step 2: attach right side panel

(H1) x 3 wooden dowel

(H2) x 5 cam bolt

(H3) x 5 cam

8

Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.

2.2. Screw-In cam bolts must be screwed down flush.

2.3. Refer to page 6 for instructions on how to use the cam lock system.

step 3: attach top panel

(H1) x 4 wooden dowel

(H2) x 6 cam bolt

(H3) x 6 cam

(H4) x 2 flat-head screw

Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.

3.2. Screw-In cam bolts must be screwed down flush.

3.3. Refer to page 6 for instructions on how to use the cam lock system.

3.4. Do not over tighten screws.

9

step 4: attach drawer left and right sides/drawer supports to drawer face

(H1) x 2 wooden dowel

(H2) x 2 cam bolt

(H3) cam x 2 x 4 flat-head screw

10

4.1. Carefully tap small wooden dowels into place. Leave 1/2” of the dowels sticking out.

4.2. Screw-In cam bolts must be screwed down flush.

4.3. Refer to page 6 for instructions on how to use the cam lock system.

4.4. Do not over tighten screws.

step 5: install drawer bottom and position drawer back

(H1) x 4 wooden dowel

11

step 6: attach drawer back

(H4) x 6 flat-head screw

12

6.1. Do not over tighten screws.

step 7: attach knobs

(H5) x 2 knob bolt

(H6) x 2 knob

7.1. Align knob bolts with pre-drilled holes to attach knobs to drawer. Do not over tighten bolts.

13

14

step 8: install drawer

step 9: install anti-tip kit

(H11)

(H7)

(H10)

Position against wall

Drill 1/4” hole

Tap in wall anchor

(H9)

(H10) x 1

15mm truss head screw

(H7) x 1 wall strap

(H11) x 2

5/8” washer

(H9) x 1 wall anchor

(H8) x 1

38mm wall screw

Fasten anti-tip strap with wall screw provided

(H8)

(H11)

WARNING

Serious or fatal crushing injuries can occur from furniture tip-over. To help prevent tip-over:

• Install tip-over restraint provided.

• Place heaviest items in the lowest drawers.

• Do not set TV's or other heavy objects on top of this product, unless the product is specifically designed to accommodate them.

• Never allow children to climb or hang on drawers, doors, or shelves.

• Never open more than one drawer at a time.

(OR)

• Do not defeat or remove the drawer interlock system.

Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over.

This is a permanent label. Do not remove.

15 lbs.

65 lbs.

15 lbs.

50 lbs.

16

1. This unit has been designed for the weight shown. Exceeding this recommended weight could result in excessive “sagging” of the top. Extreme overloading can cause failure of the top and possible injury.

2. Furniture Care Instructions: Dust with a clean, lint-free cloth. Use a spray furniture polish as needed.

QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and DPCI number ready when calling.

© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.