Ltech T3 Series Manual
Ltech T3 Series is a 2.4GHz RF wireless synchronization RGB controller that offers a user-friendly experience for controlling LED lighting. With a full-color touch wheel for color selection and a sync status indicator light, you can easily adjust and monitor the lighting effects. The T3 Series allows you to save your preferred color modes in the shortcut keys for quick access and combine them into a program for a dynamic light show.
Advertisement
Advertisement
LTECH
T3 2.4G LED RGB Controller Manual
T3
2.4G LED RGB Controller
LTECH
2. Product Size:
145mm
T3 2.4G LED RGB Controller Manual
60mm 27mm
T3
T3 RF remote control
211mm
Remote holder
175mm
T3-5A T3-CV T3-CC
warranty
5 years
T3 is the 2.4GHZ RF wireless synchronization RGB controller which adopts LTECH multiple global initiate technology. The control system consists of two parts, the RF remote control and receiver; realize the signal synchronization on unlimited receivers within effective distance, a very good solution for the LED project needs sync control wirelessly. User-friendly full-color touch wheel for color selection, unique LED state light for sync change indicated, user can simply know the LED working state from distance by checking the remote control.
Can RF remote control the functions of switch, pause, changing modes, changing speed and the brightness and so on. Built-in
32 changing modes, you can save the changing modes in the shortcut key as you like, which not only can call at any time, but also can combine into a program to play in loop.
1. Technical Specs:
T3 Remote Control
Input Voltage: DC5V Built-in Lithium Battery
Working Current: ≤ 30mA
Working Frequency: 2.4GHZ
RF Remote Distance: 30m
Remote Option: Sync control unlimited receivers
Change mode: 32 Fantastic modes
T3-5A CV Receiving controller
Input voltage: DC12V-DC24V
Max current load: 5A×3CH Max 15A
Max output power: 180W/360W(12V/24V)
Control button: 8 touch button
Compatible remote control: workable with T3, T3M, T3X
Scale levels: 1024×1024×1024
Battery Capacity: 1000mAh
Standby Time: ≤ 6 Months
Dimensions: L145×W55×H22(mm)
Package Size: L168×W102×H28(mm)
Weight (G.W.): 200g
Working temperature: -30 ℃ ~ 55 ℃
Dimension: L211×W40×H30mm
Package size: L215×W42×H32mm
Weight (G.W.): 180g
T3-CV Receiving controller
Input voltage: DC5V-DC24V
Max current load: 6A×3CH Max 18A
Max output power: 90W/216W/432W(5V/12V/24V)
Compatible remote control: T1/T2/T2M/T3/T3M/T3X
Working temperature: -30 ℃ ~55 ℃
Dimension: L175×W44×H30(mm)
Package size: L178×W48×H33mm
Weight (G.W.): 110g
ZHUHAI LTECH ELECTRONIC TECHNOLOGY CO., LTD.
T3-CC Receiving controller (current 3 in 1)
Input voltage: DC12V-DC48V
Output voltage: DC3V-DC46V
Output current: CC 350/700/1050mA ×3CH
Output power: 1.05W~48.3W ×3CH Max 144.9W
Compatible remote control: T1/T2/T2M/T3/T3M/T3X
Working temperature: -30 ℃ ~55 ℃
1
Dimension: L175×W44×H30(mm)
Package size: L178×W48×H33mm
Weight (G.W.): 110g
WWW.LTECHONLINE.COM
203mm
15mm
170mm
10mm 10mm
T3-5A
3. The learning ID method of remote control:
T3-CV/T3-CC
T3-5A learning ID:
1. Turn on the receiver and remote control.
2. Press “on/off button” on the T3-5A for 2 seconds, there is a buzzer sound, and do not release your hand on the button , at the same time press any keys on the remote control(except on/off key), until the green indicator light of remote control flashes 3 times(the long buzzer ring at the same time), learning ID successful, release all the keys.
If you have to control many receivers synchronously, each receiver should be learning ID according to the above steps learning ID.
T3-5A cancelling ID:
1. Turn on the receiver and remote control.
2. Press “on/off button” on the T3-5A for 2 seconds, there is a buzzer sound, and do not release your hand on the button , after 5 seconds press any keys on the remote control(except on/off key), until the red indicator light of remote control flashes 3 times(the long buzzer ring at the same time), release all the keys.
T3-CC/T3-CV learning ID:
1. Turn on the receiver and remote control.
2. Short press "ID learning button" on the T3-CC/T3-CV receiver, the running light keeps on, then long press any keys
(except on/off key)on the remote, the running light returns to flash (the buzzer long beep, the green light flashes 3
times), activated successful.
T3-CC/T3-CV cancelling ID:
1. Turn on the receiver and remote control.
2. Press “ID learning button” on the receiver more than 8 seconds, the buzzer beep twice, delete all the learned remote .
If you have to control many receivers synchronously, each receiver should be learning ID according to the above steps learning ID.
2
Tel: +86 756 620 8823 Fax: +86 756 620 8833 [email protected]
LTECH
4. Operation Panel and Component Instruction:
Touch Full-color Circle
Speed Keys
Mode Keys
Pause Key
★ Press “Pause” key in 3 seconds, the buzzer can be on or off.
ZHUHAI LTECH ELECTRONIC TECHNOLOGY CO., LTD.
3
T3 2.4G LED RGB Controller Manual
Sync Status Indicator Light
Brightness Keys
(Keep pressing to adjust brightness continuously)
Scene-save Keys
Press"PLAY" key to play cycle modes.(merely play the dynamic effect, the static effect will be skipped automatically)
On / Off
DC12 ~ 24V
Power Input Socket
PAUSE
On/Off Key
Pause Key
Remote ID
Learning Button
DC12V ~ 48V
Power Input Socket
Current selection switch
( Method of operation see below form )
12
PAUSE MODE MODE SPEED SPEED BRT BRT
MODE MODE
Mode Keys
SPEED SPEED
Speed Keys
BRT BRT
Brightness Keys
T3-5A
LED Lamp connected socket
LED Lamp Connected Socket
CC receiver
T3-CC
Remote ID
Learning Button
DC5V ~ 24V
Power Input Socket
CV receiver
T3-CV
LED Lamp Connected Socket
WWW.LTECHONLINE.COM
LTECH
T3 2.4G LED RGB Controller Manual
5. Other Special Functions :
A. Reset Function :
Feature: Reset function is available when remote operates abnormally.
Operation: Long press simultaneously , release the 2 keys after 3 seconds , the remote will auto off , means reset completed . and then could restart the remote.
B. Check and Edit the Frequency Point on the Remote:
Feature: a. Revising the frequency point to eliminate the external disturbance. 12 revisable frequency points for user. b. Multiple remotes sync-control becomes available when they use the same frequency point.
Attn: After reset or revised the frequency points in the remote, receivers only can be used after relearn the ID.
Check the Frequency Point on the Remote:
Turn on the remote, long press the on/off key for 5 seconds until the red light flashes 3 times, and then the green light flashes, the numbers of the green flash will be the frequency point of the remote. you can only edit the frequency point after 3 seconds.
Edit the Frequency Point on the Remote: In frequency changing state
Method 1: short press any key from 1-9, the frequency point will be 1-9 correspondingly, the green light will flash in
the same numbers. Press again any key or touch the color circle to exit the frequency edit state.
Method 2: long press “on/off” key over 5 seconds, the green light flashes, the flash times plus 1 means the
frequency point accumulate 1. In short, long press the “on/off” key 5 seconds each time, the frequency
point will accumulate 1, which will again become value 1 when added to 12, and that cycle repeats.
6. Tables of Changing Mode:
No.
1
2
Static Red
Mode
Static Green
7
8
3
4
5
6
Static Blue
Static Yellow
Static Purple
Static Cyan
Static White
RGB Skipping
Description
Brightness Adjustable
Brightness Adjustable
Brightness Adjustable
Brightness Adjustable
Brightness Adjustable
No.
Mode
17
18
Cyan Fade out and Fade in
White Fade out and Fade in
19 RGB Fade out and Fade in
20
21
Red Green Color Smooth
Red Blue Color Smooth
Brightness Adjustable
Brightness Adjustable
22 Green Blue Color Smooth
23 Red Yellow Color Smooth
Speed/Brightness Adjustable 24 Green Cyan Color Smooth
Description
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
9 7 Colors Skipping
10 White Strobe
11 7 Colors Strobe
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
25
26
27
Blue Purple Color Smooth
Green Yellow Color Smooth
Blue Cyan Color Smooth
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Speed/Brightness Adjustable
12 Red Fade out and Fade in
13 Green fade out and Fade in
14 Blue Fade out and Fade in
Speed/Brightness Adjustable 28 Red Purple Color Smooth Speed/Brightness Adjustable
Speed/Brightness Adjustable 29 Blue White Color Smooth Speed/Brightness Adjustable
Speed/Brightness Adjustable 30 Yellow Purple Cyan Color Smooth Speed/Brightness Adjustable
15 Yellow Fade out and Fade in Speed/Brightness Adjustable 31 RGB Color Smooth
16 Purple Fade out and Fade in Speed/Brightness Adjustable 32 Full-color Smooth
Speed/Brightness Adjustable
Speed/Brightness Adjustable
Tel: +86 756 620 8823
4
Fax: +86 756 620 8833 [email protected]
LTECH
T3 2.4G LED RGB Controller Manual
7. System Diagram:
Unlimited receivers can be installed within effective distance, no wiring needed between the receivers, which can be less or more in quantity according to your need for the installation, if you want to increase or decrease the receivers, just activate or cancel the control ID on the remote control will be fine, no any changes and effects on other receivers.
H
H H
H
H
H
H
H
H
H
H
H
H
H
H
H H
H
H
H
H
H
H
H
8. Wiring Diagram:
DC12V-24V DC12V-24V DC12V-24V DC5V-24V DC5V-24V DC5V-24V DC12V-48V DC12V-48V DC12V-48V
LTECH
T3 2.4G LED RGB Controller Manual
9. The Charging Methods for Remote Control:
1. When charging, please connect USB cable to the mobile charger or computer with the USB interface.
2. The blue indicator light flickers while charging, and turns green means the charging is completed. The remote
control can be chargeable even at the OFF state, on which the indicator light is dark.
3. No memory effect in the lithium battery of remote control. Follow the standard charging procedure even for the
first three times, no need over charge.
4. Red indicator light flickers meaning low battery and need to be charged. charging in low battery will affect life of
battery.
5. The remote should be full charged and stored under low cold drying while a long time without being operated.
And please full recharge every 3 months.
10. Attention:
1. The product shall be installed and serviced by a qualified person.
2. This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please ensure it is
mounted in a water proof enclosure.
3. Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
4. Please check if the output voltage of any LED power supplies used comply with the working voltage of the product.
5. Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current.
Please also ensure that the cable is secured tightly in the connector.
6. Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights.
7. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
11. Warranty Agreement:
1. We provide lifelong technical assistance with this product:
A 5-year warranty is given from the date of purchase. The warranty is for free repair or replacement and
covers manufacturing faults only.
For faults beyond the 5-year warranty we reserve the right to charge for time and parts.
2. Warranty exclusions below:
Any man-made damages caused from improper operation, or connecting to excess voltage and overloading.
The product appears to have excessive physical damage.
Damage due to natural disasters and force majeure.
Warranty label, fragile label and unique barcode label have been damaged.
The product has been replaced by a brand new product.
3. Repair or replacement as provided under this warranty is the exclusive remedy to the customer. LTECH shall
not be liable for any incidental or consequential damages for breach of any stipulation in this warranty.
4. Any amendment or adjustment to this warranty must be approved in writing by LTECH only.
★ This manual only applies to this model. LTECH reserves the right to make changes without prior notice.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
ZHUHAI LTECH ELECTRONIC TECHNOLOGY CO., LTD.
5
+
+
+
+
350mA 700mA 1050mA
+
+
+
+
Round LED
Panel Light
LED
Panel Light
LED
Panel Light
WWW.LTECHONLINE.COM Tel: +86 756 620 8823
6
Fax: +86 756 620 8833
Update Time: 2014.3.19

Public link updated
The public link to your chat has been updated.
Advertisement