CORE VAC

OPPERATORS MANUAL

MODEL

CV150C

J ULY 2019

&25(9$&

&9&

WARNING: Failure to follow instructions may result in death or serious injury

Technical Data

VOLTS

MOTOR

MODEL

CFM

CONTAINER CAPACITY

DIMENSTIONS

TYPE

TYPE A

120v

1350W/8.2A

4.3m^3/min

7.9

GAL/30L

WET/DRY

17x19x27 (in)

On/Off switch

Head

Hepa Filter

Main Filter

TYPE B

220v

1350W/6.2A

4.3m^3/min

7.9GAL/30L

17x19x27 (in)

WET/DRY

Hose

Coupling

Pipe

Elbow

Collection Bag

Connecting Hook

Suction Hole

Tank

Pipe Plug

Floor Nozzle

Dry Setup

Note : The hepa filter, main filter and collection bag are all installed.

Wet Setup

Note : The hepa filter, and main filter are not attached, while the rubber

seal and collection bag are installed.

GENERAL 7"$66.

SAFETY WARNINGS

WARNING! Read all safety warnings and all instructions . Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

General 7BDVVN Safety Warnings - Work Area Safety

B Keep work area clean and well lit. Cluttered or dark areas invite accidents.

C .BLFTVSFUIFBTTFNCMZBSFBJTGJSNTPUIFWBDVVNEPFTOPUUJQ

D Do not operate vacuums

in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.

E 3JTLPGQJODIJOHXIFOIBOEMJOHUPHHMFGBTUFOFST

General 7BDVVN Safety Warnings - Electrical Safety

B *NQSPQFSDPOOFDUJPOPGUIFFRVJQNFOUHSPVOEJOHDPOEVDUPSDBOSFTVMUJOBSJTLJGFMFDUSJDBM

TIPDL .

%POPUNPEJGZUIFQMVHIBWFUIFDPSSFDUQMVHJOTUBMMFECZBRVBMJGJFEFMFDUSJDJBO

C $POOFDUUPBQSPQFSMZHSPVOEFEPVUMFUPOMZ

D #FGPSFVTJOHUIFNBDIJOFNBLFTVSFUIFQPXFSBOEWPMUBHFDPSSFTQPOETXJUIUIFWPMUBHF

TIPXOPOUIFNBDIJOFTSBUJOHQMBUF

E %POPUMFBWFNBDIJOFXIFOQMVHHFEJO6OQMVHDPSEXIFOOPUJOVTFBOECFGPSFTFSWJDJOH

DMFBOJOHUIFNBDIJOF

F %POPUVTFXJUIEBNBHFEDPSEPSQMVH*GUIFNBDIJOFJTOPUXPSLJOHIBTCFFOESPQQFE

EBNBHFEMFGUPVUEPPSTPSESPQQFEJOXBUFSNBLFTVSFJUJTSFQBJSFECZBRVBMJGJFE

QFSTPO

G %POPUVOQMVHCZQVMMJOHUIFDPSEUPVOQMVHHSBTQUIFQMVH

H %POPUIBOEMFQMVHXJUIXFUIBOET

I 3FHVMBSMZJOTQFDUDPSEJGEBNBHFEUIFDPSENVTUCFSFQMBDFECZBRVBMJGJFEQFSTPOOFM

J 5VSOPGGBMMDPOUSPMTCFGPSFVOQMVHHJOH

K *GVTJOHBOFYUFOTJPODPSENBLFTVSFUIFDPSESBUUJOHJTTVJUBCMFGPSUIJTNBDIJOF

L %POPUFYQPTFNBDIJOFUPSBJOPSNPJTUVSF4UPSFJOEPPSTPOMZ

General 7BDVVN Warnings - Personal Safety

B Stay alert, watch what you are doing and use common sense when operating a WBDVVN . Do not use a WBDVVN while you are tired or under the influence of drugs, alcohol or medication.

A moment of inattention while operating power tools may result in serious personal injury.

C Use personal protective equipment. Always wear eye protection.

Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

D ,FFQIBJSMPPTFDMPUIJOHGJOHFSTBOEBMMQBSUTPGCPEZBXBZGSPNPQFOJOHTBOENPWJOHQBSUT

E %POPUVTFXJUIPVUEVTUCBHBOEGJMUFSTJOQMBDF3FQMBDFBTEFTDSJCFEJONBOVBM

F %POPUQJDLVQBOZUIJOHUIBUJTCVSOJOHTVDIBTDJHBSFUUFTNBUDIFTPSIPUBTIFT

G %POPUQJDLVQDPNCVTUJCMFMJRVJETTVDIBTHBTPMJOF

4

$MFBOJOH$PMMFDUJPO#BH

5IF$7$JTFRVJQQFEXJUIBOJOUFSOBMDBQUVSFCBH

*OIBMFEEVTUJTTUPSFE XJUIUIJTCBH BOE DMFBOJOHJOTJEFUIFWBDVVNDMFBOFSJT as TJNQMF as SFQMBDJOHUIFCBH

:PVTIPVME DIFDL UIF DBQUVSFCBH GSPN UJN e UPUJNF

*GUIFCBHJTGVMMJUNBZXFBLFOUIFTVDUJPOQPXFS or

TUBJOUIFNPUPS

'JSTUMPPTFOUIFIPPLUIBUTFDVSFTUIFIFBE

3FNPWJOHUIFIFBEXJMMMFUGJMUFSPVU

. De UBDI UIFCBH UP UIFJOMFU

"TTFNCMZNVTUCFEPOFJOSFWFSTFPSEFS

6. PROBLEM SOLVING

The dust extractors are designed and manufactured for severe environments and tasks, but the user must note th at them a chine must be protected from impacts and blows. Filter, seals, attachments, and connections are carefully adapted and selected with regard to the opera tor's work environment. Therefore, the opera tor and service personnel must treat the m achine with care in order for it to work correctly for many years.

Issue

Motor doesn’t start

Motor stops immediately after starting

Motor runs but there is no suction

Motor runs but poor suction dust blown from motor

Cause

No power

Cable defect

Switch defect

Soft start defect

Wrong fuse

Shor t in cable/mac hine

Hose not connected

Hose clogged/blocked

No dust bag

Hole in hose

Filter clogged

Loose top cover

Defective gaskets

Misassembled or damaged filter system

Abnormal noise

Solution

Plug in machine

Replace cable

Replace switch

Replace soft start

Connect to correct fuse

Order service

Connect hose

Clean hose

Fit dust filter system

Replace hose

Clean filter/Replace filter

Adjust

Replace affected gaskets

Adjust/Replace filters

Other service

NOTES

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

NOTES

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

____________________________________________________

EQUIPMENT AND PARTS

WARRANTY

Diamond Products warrants all equipment manufactured by it against

defects in workmanship or materials for a period of 90 Days from the

date of shipment to Customer. The responsibility of Diamond Products

under this Warranty is limited to replacement or repair of defective parts

at Diamond Products’ Elyria, Ohio factory, or at a point designated by it,

of such parts as shall appear to us upon inspection at such parts, to

have been defective in material or workmanship, with expense for

transportation and labor borne by Customer. In no event shall Diamond

Products be liable for consequential or incidental damages arising out of

the failure of any Product to operate properly.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED

OR IMPLIED, AND ALL SUCH OTHER WARRANTIES ARE HEREBY DIS-

CLAIMED.

Printed in U.S.A.

333 Prospect Street, Elyria, Ohio 44035

(440) 323-4616



(800) 321-5336



Fax (800) 634-4035 www.diamondproducts.com