STMicroelectronics FP-SNS-6LPNODE1 User Manual
Tangazo
Tangazo
UM2100
User manual
Getting started with FP-SNS-6LPNODE1 software for IoT sensor node connection to 6LoWPAN networks using sub-1GHz RF
Description
FP-SNS-6LPNODE1 is an STM32Cube function pack which lets you connect your IoT node to a 6LoWPAN Wireless Sensor
Network and expose the sensor and actuator resources using standard application layer protocols.
This software together with the suggested combination of STM32 and ST devices can be used, for example, to develop smart home, building or lighting applications. The package contains sample applications to implement sensor data reading and LED control from a local or a remote device on the Internet.
The software runs on the STM32 microcontroller and includes drivers for the S2-LP Sub-1 GHz RF radio, the SPIRIT1 -based sub-1 GHz RF communication modules ( SPSGRF-868 and SPSGRF-915 ), as well as the motion, environmental, and time-offlight sensors.
UM2100 - Rev 4 - April 2019
For further information contact your local STMicroelectronics sales office.
www.st.com
1
RF
OS
CoAP
LWM2M
IoT
IPSO
MEMS
Wi-Fi
GUI
Acronym
IDE
BSP
HAL
UDP
6LoWPAN
RPL
MCU
Acronyms and abbreviations
Table 1. List of acronyms
Description
Integrated development environment
Board support package
Hardware abstraction layer
User datagram protocol
IPv6 over low power wireless personal area networks
Routing protocol for low power and lossy networks
Microcontroller unit
Radio frequency
Operative system
Constrained application protocol
Lightweight machine to machine
Internet of things
IP for smart objects
Micro electro-mechanical systems
Wireless LAN based on IEEE 802.11
Graphical user interface
UM2100
Acronyms and abbreviations
UM2100 - Rev 4 page 2/26
UM2100
FP-SNS-6LPNODE1 software package
2 FP-SNS-6LPNODE1 software package
2.1
2.2
Overview
•
•
•
•
•
FP-SNS-6LPNODE1 is a software package which expands the functionality of STM32Cube.
The key features of the package are:
•
•
Complete firmware to connect an IoT node with sensors and actuators to a 6LoWPAN network, using sub-1GHz RF communication technology
Middleware library with Contiki OS and Contiki 6LoWPAN protocol stack 3.0
Support for mesh networking technology through the standard RPL protocol
IPSO Smart Object data representation of the node resources (sensors and actuators) with the OMA
Lightweight M2M (LWM2M) standard
Sample implementation available for X-NUCLEO-S2868A1 , X-NUCLEO-IDS01A4 or X-NUCLEO-IDS01A5 boards, X-NUCLEO-IKS01A1 or X-NUCLEO-IKS01A2 , and X-NUCLEO-6180X1 sensor boards, when connected to a NUCLEO-F401RE or a NUCLEO-L152RE board
Easy portability across different MCU families, thanks to STM32Cube
Free, user-friendly license terms
This software uses Contiki OS to develop applications that can connect our node to a 6LoWPAN network.
Communication in the 6LoWPAN network is handled by the S2-LP sub-1GHz RF transceiver (on an X-NUCLEO-
S2868A1 expansion board) or SPIRIT1 sub-1GHz RF transceiver (on an X-NUCLEO-IDS01A4 or X-NUCLEO-
IDS01A5 expansion board) . Sensor data from motion and environmental sensors boards (X-NUCLEO-IKS01A1 or X-NUCLEO-IKS01A2) and proximity sensor, gesture and ALS sensor board (X-NUCLEO-6180XA1) can be accessed from a remote device via RESTful transactions (HTTP or CoAP protocol).
The software enables the exposure of sensor and actuator resources on the node with standard routines based on the OMA Lightweight M2M (LWM2M) specification, through an object model implemented according to the
IPSO Smart Object Guidelines (see http://www.ipso-alliance.org/ipso-community/resources/smart-objectsinteroperability/ ).
Technical details on the Contiki OS/6LoWPAN stack can be found at https://github.com/contiki-os/contiki/wiki , in the Internals section of the wiki.
Information regarding Contiki APIs is available in the doxygen documentation in the FP-SNS-6LPNODE1 package.
Architecture
This software is based on the STM32CubeHAL hardware abstraction layer for the STM32 microcontroller. it extends STM32Cube by providing a board support package (BSP) for the sub-1GHz RF communication expansion boards, the environmental and motion MEMS sensors expansion board, and for the proximity, ranging and light sensing sensors expansion board. The drivers abstract low-level details of the hardware and allow the middleware components and applications to access sensor data in a hardware-independent manner, and to access and control the S2-LP sub-1GHz RF radio and the SPIRIT1 -based sub-1GHz RF communication modules
( SPSGRF-868 or SPSGRF-915 ).
The software layers used by the application software to access and use the X-NUCLEO expansion boards are the following:
STM32Cube HAL layer : consists of a simple, generic and multi-instance set of APIs (application programming interfaces) to interact with the upper application, library and stack layers. These generic and extension APIs are directly built around a generic architecture and allows layers like the middleware layer built on top of them to implement their functions without requiring specific hardware configuration information for given microcontroller units (MCU). This structure improves library code reusability and guarantees easy portability across other devices.
Board support package (BSP) layer : supports the peripherals on the STM32 Nucleo board, except the MCU.
This limited set of APIs provides a programming interface for certain board specific peripherals like the LED and user button. This interface also helps in identifying the specific board version.
UM2100 - Rev 4 page 3/26
Figure 1. FP-SNS-6LPNODE1 software architecture
UM2100
Folder structure
2.3
Folder structure
Figure 2. FP- SNS-6LPNODE1 package folder structure
UM2100 - Rev 4
The folders in the software package are:
• Documentation : with a compiled HTML file generated from the source code, which details the software components and APIs.
•
•
•
Drivers : the HAL drivers, the board-specific drivers for each supported board or hardware platform
(including those for the onboard components) and the CMSIS vendor-independent hardware abstraction layer for the Cortex-M processor series.
Middlewares : contains the full porting of the Contiki OS for the STM32 platform. The ST subfolder contains
STM32-specific files to configure both the Contiki OS and the SPIRIT1 radio, while the Third_Party folder contains Contiki source files.
Projects : contains several example applications that implement application-level functions to expose the node sensor and actuator resources through the LWM2M standard using the data model described in the
IPSO Smart Object Guidelines. The projects are provided for the NUCLEO-F401RE and NUCLEO-L152RE page 4/26
2.4
UM2100
APIs platforms under the IAR Embedded Workbench for ARM, RealView Microcontroller Development Kit (MDK-
ARM), and System Workbench for STM32 (SW4STM32) development environments.
APIs
Detailed user API function and parameter descriptions are available in a compiled HTML file in the package
Documentation folder.
UM2100 - Rev 4 page 5/26
UM2100
End-to-end system description and setup
2.5
2.5.1
2.5.2
End-to-end system description and setup
End-to-end system overview
In a typical end-to-end deployment scenario, a node runs a lightweight embedded web server that enables access from a remote system to the hosted resources representing the physical sensors and actuators on the node board. Resources can be accessed via RESTful transactions, which is performed with the CoAP application protocol in the context of constrained resource environments.
End-to-end connectivity scenario using a 6LoWPAN-to-WiFi bridge and remote application server
In this scenario, a 6LoWPAN-to-WiFi bridge forwards the traffic between the 6LoWPAN and Wi-Fi networks, allowing connectivity between a node in the 6LoWPAN network and an application server on the Internet.
An implementation of the 6LoWPAN-to-WiFi bridge can be performed with the FP-NET-6LPWIFI1 software package (STM32Cube function pack) running on a NUCLEO-F401RE or a NUCLEO-L152RE equipped with an X-
NUCLEO-IDS01A4 or X-NUCLEO-IDS01A5 sub-1GHz RF expansion board, and an X-NUCLEO-IDW01M1 Wi-Fi expansion board.
Alternatively, an implementation of the 6LoWPAN-to-WiFi bridge can be made by using a B-L475E-IOT01A
Discovery board, equipped with an X-NUCLEO-S2868A1 sub-1GHz RF expansion board based on S2-LP radio.
The FP-NET-6LPWIFI1 software package (STM32Cube function pack) implementing a 6LoWPAN-to-Wi-Fi bridge is available at www.st.com/stm32ode-fp .
Figure 3. End-to-end connectivity using a 6LoWPAN-WiFi bridge
2.5.3
For details explaining how to set up the 6LoWPAN-to-Wifi bridge and to establish the connection with a public application server implementing the OMA Lightweight M2M (LWM2M) standard, see Reference
can be used for evaluation purposes.
End-to-end connectivity scenario using an IPv6 host PC and local application server
In this scenario, a 6LoWPAN border router is connected to a PC (IPv6 host). The wireless sensor node is connected to a 6LoWPAN border router that sends and receives IPv6 packets to and from the host PC. In our sample implementation, the border router system runs on an STM32 Nucleo board connected to the PC through a
USB serial link.
The application server could run on the internet or on the local PC itself, but we will assume a local application server implementation for the sake of simplicity.
UM2100 - Rev 4 page 6/26
UM2100
End-to-end system description and setup
Figure 4. End-to-end connectivity scenario using a host PC
2.5.4
2.5.5
2.5.5.1
, section 2.5, for a detailed description of the IPv6 host and 6LoWPAN border router setup.
LWM2M application server (Leshan)
The system has been tested with the Leshan Java based open source implementation of the OMA Lightweight
local host, as shown in Figure 4. End-to-end connectivity scenario using a host PC
.
Refer to http://www.eclipse.org/leshan/ , for information on setting up the Leshan server on the host PC. The
README file in the GitHub repository of the Leshan project at https://github.com/eclipse/leshan also contains installation information.
Wireless sensor node applications
The FP-SNS-6LPNODE1 software package Projects folder contains several sample applications for the X-
NUCLEO-S2868A1 , X-NUCLEO-IDS01A4 or X-NUCLEO-IDS01A5 sub-1GHz RF expansion board, X-NUCLEO-
IKS01A1 or X-NUCLEO-IKS01A2 , and X-NUCLEO-6180XA1 sensor expansion boards used on top of a
NUCLEO-F401RE board.
These applications can configure the wireless node as a REST server and expose the sensor and actuator resources using the OMA Lightweight M2M standard (LWM2M) and the IPSO Smart Objects Guidelines
The applications differ by the type of sensors used.
ipso-nosensors application
This sample application allows device configuration as a simple wireless node without any sensors. It exposes common resources like LEDs and user buttons.
The device can be implemented using a NUCLEO-F401RE or NUCLEO-L152RE board equipped with an X-
NUCLEO-S2868A1 , X-NUCLEO-IDS01A4 or X-NUCLEO-IDS01A5 sub-1GHz RF expansion board.
Table 2. IPSO objects supported by the ipso-nosensors application
Server
Object ID Instances
1 1
Device 3
IPSO Digital Input 3200
1
1
Notes
The instance maps the STM32 Nucleo board user button
UM2100 - Rev 4 page 7/26
UM2100
End-to-end system description and setup
2.5.5.2
2.5.5.3
2.5.6
Note:
Object ID Instances
IPSO Light Control 3311 2
Notes
The instances map the STM32 Nucleo and X-NUCLEO-IDS01A4/5 board LEDs ipso-mems application
This sample application allows device configuration as a wireless node with motion and environmental sensors. It exports resources from the MEMS sensor expansion board (temperature, humidity and acceleration sensors).
The device can be implemented using a NUCLEO-F401RE or NUCLEO-L152RE board equipped with an X-
NUCLEO-S2868A1 , X-NUCLEO-IDS01A4 or X-NUCLEO-IDS01A5 sub-1GHz RF expansion board, and an X-
NUCLEO-IKS01A1 or X-NUCLEO-IKS01A2 expansion board, featuring temperature, humidity, pressure and motion MEMS sensors.
Object
Server
Device
IPSO Digital Input
IPSO Temperature
IPSO Humitidy
IPSO Light Control
IPSO Accelerometer
IPSO Magnetometer
IPSO Barometer
Table 3. IPSO objects supported by the ipso-mems application
ID
1
3
3200
3303
3304
3311
3313
3314
3315
Instances
1
1
1
1
1
1
1
1
1
Notes
The instance maps the STM32 Nucleo board user button
The instance maps the STM32 Nucleo board LED ipso-flightsense application
This sample application allows device configuration as a wireless node with a time-of-flight sensor (VL6180X proximity, gesture and ALS sensor, based on ST’s FlightSense™ technology). The node exports resources from the FlightSense sensor expansion board.
The device can be implemented using a NUCLEO-F401RE board equipped with an X-NUCLEO-S2868A1 ,
X-NUCLEO-IDS01A4 or X-NUCLEO-IDS01A5 sub-1GHz RF expansion board, and an X-NUCLEO-6180XA1 expansion board, featuring the VL6180X proximity, gesture and ALS sensor.
Table 4. IPSO objects supported by the ipso-flightsense application
Server
Device
Object
IPSO Light Control
ID Instances
1
3
IPSO Digital Input 3200
IPSO Presence Sensor 3302
3311
1
1
1
1
2
Notes
The instance maps the STM32 Nucleo board user button
The instances map the STM32 Nucleo and X-NUCLEO-IDS01A4/5 board LEDs
Wireless sensor node setup
All the sample applications provided demonstrate how a node can connect to a server by means of the OMA
Lightweight M2M (LWM2M) standard. By default, the three sample applications are configured to implement the scenario where the wireless node attempt connection with a public online server (located at: https://leshan.eclipseprojects.io
; it is is a Java implementation of a LWM2M server).
Leshan also implements a GUI that communicates with the server through a REST API, more information about the Leshan server can be found at https://www.eclipse.org/leshan . The Leshan public LWM2M server is used for evaluation purposes only.
UM2100 - Rev 4 page 8/26
UM2100
End-to-end system description and setup
2.5.6.1
The sample applications can also be made to implement the scenario enabling connection to a Leshan LWM2M server that runs locally on a host PC. In this case, the URL of the local server must be inserted in the application code.
To do this, undefine USE_PUBLIC_LWM2M_SERVER from the project properties (preprocessor symbols) and set the desired address in client.c file, e.g.:
#define LWM2M_SERVER_ADDRESS_v6 “aaaa::1” or
#define LWM2M_SERVER_ADDRESS_v4 “192.168.0.1”
Connecting the wireless node to the LWM2M server
Step 1.
Power the STM32 Nucleo board using a Mini-B USB cable connected to the PC.
Step 2.
Program the firmware on the STM32 Nucleo board by copying (drag and drop) the binary file on the
USB mass storage that is automatically created when plugging the STM32 Nucleo board to the PC.
Ready-to-be-flashed binary firmware can be found for each of the three supported applications in the
Binary subdirectory of each sample application folder. Alternatively, each application can be built to generate binaries using the provided projects, with one of the supported IDEs.
Step 3.
Open a serial line monitor utility, select the serial port name to which the board is connected and configure it with the parameters shown below (example uses Tera Term utility with the device connected to COM port 19).
Figure 5. Serial line terminal configuration parameters
Step 4.
Press the black RESET button on the STM32 Nucleo board and wait for the node to complete the registration
Figure 6. Client node registered on the remote server
UM2100 - Rev 4
Step 5.
Open your web browser and insert the URL of the public Leshan server ( https:// leshan.eclipseprojects.io
) for the default remote application server scenario, or insert the URL of the local Leshan server for the PC server scenario.
page 9/26
UM2100
End-to-end system description and setup
Figure 7. Leshan server homepage
Step 6.
Click on the corresponding Client Endpoint
Figure 8. Leshan server, client homepage
UM2100 - Rev 4
Step 7.
Start observing or reading one or more resources page 10/26
UM2100
End-to-end system description and setup
Figure 9. Leshan server observing and reading resources belonging to IPSO objects
UM2100 - Rev 4 page 11/26
UM2100
System setup guide
3 System setup guide
3.1
3.1.1
Hardware description
This section summarizes the hardware components needed for developing a sensor-based application. Visit www.st.com
for more detailed information on all the associated boards.
STM32 Nucleo platform
STM32 Nucleo development boards provide an affordable and flexible way for users to test solutions and build prototypes with any STM32 microcontroller line.
The Arduino™ connectivity support and ST morpho connectors make it easy to expand the functionality of the
STM32 Nucleo open development platform with a wide range of specialized expansion boards to choose from.
The STM32 Nucleo board does not require separate probes as it integrates the ST-LINK/V2-1 debugger/ programmer.
The STM32 Nucleo board comes with the comprehensive STM32 software HAL library together with various packaged software examples.
Figure 10. STM32 Nucleo board
3.1.2
Information regarding the STM32 Nucleo board is available at www.st.com/stm32nucleo
X-NUCLEO-S2868A1 expansion board
The X-NUCLEO-S2868A1 expansion board is based on the S2-LP radio and operates in the 868 MHz ISM frequency band.
The expansion board is compatible with ST morpho and Arduino UNO R3 connectors.
UM2100 - Rev 4 page 12/26
UM2100
Hardware description
The X-NUCLEO-S2868A1 interfaces with the STM32 Nucleo microcontroller via SPI connections and GPIO pins.
You can change some of the GPIOs by mounting or removing the resistors.
Figure 11. X-NUCLEO-S2868A1 expansion board
3.1.3
X-NUCLEO-IDS01A4 and X-NUCLEO-IDS01A5 expansion boards
The X-NUCLEO-IDS01A4 and X-NUCLEO-IDS01A5 expansion boards provide a platform to test the features and capabilities of the SPSGRF modules, based on the SPIRIT1 low data rate, low power, sub-1 GHz transceiver device.
These expansion boards can be plugged into the Arduino UNO R3 connectors of any STM32 Nucleo board. The user can mount ST morpho connectors if required. Other expansion boards can easily be stacked to allow evaluation of different devices using sub-1 GHz communication.
•
•
The boards are equipped with the following features:
• Onboard SPSGRF module based on the SPIRIT1 sub-1 GHz transceiver device
•
SPI EEPROM for saving parameters
LED for user interface
Jumper at 3V3 for checking the current consumption of the expansion board
UM2100 - Rev 4 page 13/26
UM2100
Hardware description
Figure 12. X-NUCLEO-IDS01A4 / X-NUCLEO-IDS01A5 expansion board
3.1.4
X-NUCLEO-IKS01A1 expansion board
The X-NUCLEO-IKS01A1 is a sensor expansion board for the STM32 Nucleo board. It is also compatible with
Arduino UNO R3 connector layout and is designed around humidity (HTS221), pressure (LPS25HB) and motion
(LIS3MDL and LSM6DS0) sensing devices. The X-NUCLEO-IKS01A1 interfaces with the STM32 MCU via the I²C pin, and the user can change the default I²C port and the device IRQ by changing a resistor on the evaluation board.
You can attach the LSM6DS3 DIL24 expansion component and use it instead of the one of the LSM6DS0 sensors.
UM2100 - Rev 4 page 14/26
Figure 13. X-NUCLEO-IKS01A1 expansion board
UM2100
Hardware description
3.1.5
X-NUCLEO-IKS01A2 expansion board
The X-NUCLEO-IKS01A2 is a motion MEMS and environmental sensor expansion board for STM32 Nucleo.
It is compatible with the Arduino UNO R3 connector layout, and is designed around the LSM6DSL 3D accelerometer and 3D gyroscope, the LSM303AGR 3D accelerometer and 3D magnetometer, the HTS221 humidity and temperature sensor and the LPS22HB pressure sensor.
The X-NUCLEO-IKS01A2 interfaces with the STM32 microcontroller via the I²C pin, and it is possible to change the default I²C port.
UM2100 - Rev 4 page 15/26
UM2100
Hardware description
Figure 14. X-NUCLEO-IKS01A2 MEMS and environmental sensor expansion board
3.1.6
•
X-NUCLEO-6180XA1 expansion board
•
•
•
The X-NUCLEO-6180XA1 is an expansion board for the STM32 Nucleo system, also compatible with Arduino
UNO R3 connector layout and designed around STMicroelectronics VL6180X proximity, gesture and ALS sensor, based on the ST FlightSense™ Time-of-Flight technology.
The board allows the user to test VL6180X functionality and develop relevant applications. It includes:
• a 4-Digit display to render either the range value in mm or the ambient light value in lux a switch to select the value type to be displayed a 2.8 V regulator to supply the VL6180X two level shifters to adapt the I/O level to the microcontroller main board the necessary connectivity for the application
For applications which implement gesture recognition, you need to plug two additional satellite sensors to the connectors marked LEFT and RIGHT. The third connector (BOTTOM) is not used.
UM2100 - Rev 4 page 16/26
Figure 15. X-NUCLEO-6180XA1 expansion board
UM2100
Software requirements
3.2
Software requirements
•
•
The following software components are needed in order to set up a suitable development environment for creating applications with the STM32 Nucleo plus RF expansion and optional sensor expansion boards:
FP-SNS-6LPNODE1 software, available at www.st.com .
One of the following development tool-chain and compilers:
– IAR Embedded Workbench for ARM ® (EWARM) toolchain + ST-LINK
– RealView Microcontroller Development Kit (MDK-ARM) toolchain + ST-LINK
– System Workbench for STM32 (SW4STM32) + ST-LINK
UM2100 - Rev 4 page 17/26
UM2100
Hardware setup
3.3
3.3.1
Hardware setup
Configuration for ipso-nosensors sample application
Required components:
• One STM32 Nucleo development platform (order code: NUCLEO-F401RE or NUCLEO-L152RE )
•
•
One S2-LP expansion board (order code: X-NUCLEO-S2868A1 ) or one SPIRIT1 expansion board (order code: X-NUCLEO-IDS01A4 (for 868 MHz), or X-NUCLEO-IDS01A5 (for 915 MHz)
One USB type A to Mini-B USB cables to connect each STM32 Nucleo to the PC
In the figure below, an X-NUCLEO-IDS01A4 or X-NUCLEO-IDS01A5 SPIRIT1 expansion board is connected to the STM32 Nucleo board.
Figure 16. STM32 Nucleo plus the SPIRIT1 expansion board
3.3.2
•
•
•
Configuration for ipso-mems sample application
Required components:
• One STM32 Nucleo development platform (order code: NUCLEO-F401RE or NUCLEO-L152RE )
One S2-LP expansion board (order code: X-NUCLEO-S2868A1 ) or one SPIRIT1 expansion board (order code: X-NUCLEO-IDS01A4 (for 868 MHz), or X-NUCLEO-IDS01A5 (for 915 MHz)
One MEMS sensors expansion board (order code: X-NUCLEO-IKS01A1 or X-NUCLEO-IKS01A2 )
One USB type A to Mini-B USB cables to connect each STM32 Nucleo to the PC
In the figure below, a X-NUCLEO-IKS01A1 MEMS expansion board is connected to the STM32 Nucleo over the
X-NUCLEO-IDS01A4 or X-NUCLEO-IDS01A5 SPIRIT1 expansion board.
UM2100 - Rev 4 page 18/26
UM2100
Hardware setup
Figure 17. STM32 Nucleo plus the SPIRIT1 expansion board plus the MEMS expansion board
Important:
If using X-NUCLEO-IKS01A1 and X-NUCLEO-S2868A1, to avoid a resource usage conflict, the 0 Ω resistor at position SB21 on the X-NUCLEO-IKS01A1 must be removed.
3.3.3
Configuration for ipso-flightsense sample application
•
•
Required components:
• One STM32 Nucleo development platform (order code: NUCLEO-F401RE )
• One S2-LP expansion board (order code: X-NUCLEO-S2868A1 ) or one SPIRIT1 expansion board (order code: X-NUCLEO-IDS01A4 (for 868 MHz), or X-NUCLEO-IDS01A5 (for 915 MHz)
One FlightSense expansion board (order code: X-NUCLEO-6180XA1 )
One USB type A to Mini-B USB cables to connect each STM32 Nucleo to the PC
In the figure below, an X-NUCLEO-IKS01A1 FlightSense expansion board is connected to the STM32 Nucleo development board over the X-NUCLEO-IDS01A4 or X-NUCLEO-IDS01A5 SPIRIT1 expansion board.
UM2100 - Rev 4 page 19/26
UM2100
Hardware setup
Figure 18. STM32 Nucleo plus the SPIRIT1 expansion board plus the FlightSense expansion board
UM2100 - Rev 4 page 20/26
4
UM2100
References
References
[1] UM2080 – User Manual - Getting started with the FP-NET-6LPWIFI1 software package connecting 6LoWPAN
IoT nodes to the Internet via Wi-Fi networks, available at www.st.com
[2] UM2040 – User Manual - Getting started with Contiki6LP, Contiki OS and 6LoWPAN sub-1 GHz RF in X-
CUBE-SUBG1 expansion for STM32Cube, available at www.st.com
[3] IPSO Alliance Smart Object Guidelines – IPSO Smart Object Starter Pack, available at http://www.ipsoalliance.org/ipso-community/resources/smart-objects-interoperability/
UM2100 - Rev 4 page 21/26
Revision history
Date
17-Oct-2016
22-Feb-2017
05-Sep-2018
15-Apr-2019
Table 5. Document revision history
Version Changes
1 Initial release.
2
3
4
Throughout document: added NUCLEO-L152RE board compatibility information.
Throughout document: added X-NUCLEO-S2868A1 board compatibility information.
Updated
Section 2.5.6.1 Connecting the wireless node to the LWM2M server .
UM2100
UM2100 - Rev 4 page 22/26
UM2100
Contents
Contents
End-to-end connectivity scenario using an IPv6 host PC and local application server. . . . . 6
X-NUCLEO-IDS01A4 or X-NUCLEO-IDS01A5 expansion board . . . . . . . . . . . . . . . . . . . 13
UM2100 - Rev 4 page 23/26
UM2100
List of tables
List of tables
UM2100 - Rev 4 page 24/26
UM2100
List of figures
List of figures
UM2100 - Rev 4 page 25/26
UM2100
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks . All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2019 STMicroelectronics – All rights reserved
UM2100 - Rev 4 page 26/26
Pakua
Kiungo cha umma kime sasishwa
Kiungo cha umma kwa mazungumzo yako kimesasishwa. You may view and manage your chat links after registration here.
Kiungo cha umma cha hati
Tangazo