TENDER DOCUMENT - Coach Outlet online

TENDER DOCUMENT - Coach Outlet online
TENDER DOCUMENT
TENDER NO. 004/ 12
FOR SUPPLY OF EQUIPMENT
GMC/Equipment/12-13/ Due on 12-10-12
:
(MACHINERY, INSTRUMENTS
& OTHER ITEMS)
CONTRACT DOCUMENT CONSISTING OF TENDER NOTICE. TENDER
FORM, RATE SHEET, TENDER CONDITIONS, SPECIFICATIONS AND
TECHNICAL PARTICULARS., FORM OF AGREEMENT ETC.
DEAN
GANDHI MEDICAL COLLEGE
BHOPAL
NATIONAL COMPETITIVE BIDDING FOR THE SUPPLY OF EQUIPMENTS
(MACHINERY, INSTRUMENTS & OTHER ITEMS)
BID DOCUMENT PURCHASE START DATE
: 6/09/2012
LAST DATE AND TIME FOR
SUBMISSION OF BIDS. 12/10/2012
Time up to 1.00 P.M.
: DATE AND TIME OF OPENING OF BIDS
Starting New Post Graduate Disciplines and Incresing PG
Seats & other Equipments for Various Department
(ENVELOP "A")
12/10/2012
Time at 3.00 P.M.
-
PLACE OF OPENING OF BIDS
: CONFERENCE HALL
DEAN, GANDHI MEDICAL COLLEGE
BHOPAL
ADDRESS FOR CORRESPONDENCE
: DEAN, GANDHI MEDICAL COLLEGE,
SULTANIA ROAD, BHOPAL (M.P.)
PIN-462001
OFFICE OF THE DEAN
GANDHI MEDICAL COLLEGE, BHOPAL
SR. NO. ............................./MC/10/12
Bhopal, date : ........
INVITATION FOR TENDER
1.
2.
Tenders are invited from eligible bidders for the supply of EQUIPMENTS (Machinery, Instruments & Other
Items) under Rate Contract.
Bids may be submitted by the primary manufacturer or their authorized distributor or authorized importer
for and on behalf of the primary manufacturer provided the bid is accompanied by a duly notarized letter of
authority from the primary manufacturer.
S.
No
.
2
Particular
Bid Document &
Purchase
Start
Date
6/09/2012
Starting New Post
Graduate Disciplines
and Incresing PG Seats
& other Equipments for
Various Department
Last Date & Time for
Submmission of Bids
Date & Time
Opening of Bids
12/10/2012
Upto 1.00 PM
12/10/2012
at 3.00 PM
of
.
5.
Bidders may offer their bid for any one or more EQUIPMENTS. Bids will be opened in the presence of
Bidder’s representatives who are willing to be present on the specified date and time mentioned above.No
separate intimation shall be sent to the bidder for this.
6.
Bid shall consist of
1 Envelope A - Shall contain Essiential Document and EMD (EMD envelope shall be sealed properly and
superscript with bidders name and address.
2. Envolap B Shall contain Technical Bid
3. Envolap C Shall contain only price Bid
4. Envolap D Shall Contain envolap; A,B & C
Note: - All envelope shall be sealed properly and superscript with the bidders names and addres
Envelope D and A along with the essential documents will be opened on above mentioned
date and time. Envelope A along with the essential documents (List of essential documents should be
attached) will be subject to scrutiny. Those bidders whose documents and contents are as per tender
conditions will only be qualified for opening of technical bid (In envelope B). The date and time of
opening of technical bid will be displayed on the notice board and will also be communicated to those who
qualify for opening of the bid.
7.
Technical Bid (envelope B) and Price bid (envelope C) will be submitted separately in sealed envelopes.
Technical Bid will be evaluated as per specifications, terms and conditions laid by the Technical
Committee. Those bidders who qualify for the technical bid will be invited for demonstration of
equipments. The date, time and place for demonstration shall be specified by “ the purchaser” failing which
their bid will be rejected. Thereafter, price Bid (envelope C) will be opened only for those bidders whose
bid will be found technically as per specification after demonstrations. Opening of date of price bid will be
communicated separately.
8.
A complete Set of Tender Form alongwith Terms & Condition can be obtained from the office of the
undersigned from 6.9.2012 by giving an application to the Dean, Gandhi Medical College, Bhopal during office
hours (upto 4 Pm.) on any working day after depositing Rs. 5000/- (Rs. Five Thousand only) in form of
Cash/DD (In favour of Dean Gandhi Medical College, BHopal) which is not refundable.
Note:- Tender can be downloaded from the website www.gmcbhopal.net. The bid form shall be enclosed with
a DD of Rs.5,000/-(Rupees Five Thousand) in the name of Dean Gandhi Medical College, Bhopal failing
which the tender will be rejected.
Purchase Officer
for Dean
Gandhi Medical College Bhopal
.SECTIONII:INSTRUCTIONTOBIDDER
TABLEOFCLASSES
S.No.
Topic.
Page No
.
S.No.
5
5
5
5
20.
21.
22.
23
24
25
26
Topic
Page No.
A. Introduction
1.
2.
3.
4.
Scope of work
Eligible Bidders
Eligible and services
Cost of Bidding
B. Bidding Documents
5. Contents of Bidding Documents
6. Clarification of Bidding Documents
7. Amendments of Bidding Documents
C. Preparation of Bids
8. Language of Bid
9. Documents Comprising the Bid
10. Bid Form
11. Bid Prices
12. Bid Currencies
13. Documents Establishing Bidder’s
Eligibility and Qualifications
14. Documents Establishing Goods
Eligibility and Conformity to
Bidding Documents
Late bids
13
Modification and withdrawl of bids 13
Bid Opening and Evaluation of bids 14
Clarification of bids
15
Preliminary Examination
15
Evaluation & Comparison of bids 15
Contacting of the purchaser
16
Award of contract
6
6
6
27 Post Qualification
28. Award criteria
29. Purchaser's right to vary quantities
7
30.
The purchaser's right to
17
accept any bid and to reject any or all bids
31. Notification of Rate Contract
17
32. Signing of Rate Contract
17
33. Performance Security &
18
Inspection Charges
34 Placement of supply order
18
35 Corrupt or Fraudulent Practices
18
7
7
7
8
8
9
15. Bid Security
16. Period of validity of Bids
10
10
D. Submission of Bids
17. Bid stages
18. Price Bid
19. Deadline for submission of bids
11
13
13
16
16
17
-4-
A. Introduction
1.
Scope of Work
1.1
The Dean Gandhi Medical College Bhopal M.P. require Equipments ( Machinery Instruments and other
items) for various Departments of Gandhi Medical College, Bhopal & associated Hospitals Bid is issued for
procurement of equipment (list of equipments enclosed) at competitive rates. After finalization of the bid the
contract will be awarded to successful bidders for supply of the items, during one year or till further order on rate
contract basis on approved rates The Machines / Equipments have to be Supplied and installed to the various
department of Gandhi Medical College Bhopal & associated Hospitals.
2.
Eligible Bidders
2.1
The invitation for Bids is open to all eligible bidders.
2.2
Bidders should not be associated, or have been associated in the past, directly or indirectly with a firm or
any of in affiliates which have been engaged by the Purchaser to provide consulting service for the
preparation of the design, specification and other to be used for the procurement of the goods to the
purchaser under this invitation of Bids.
2.3
Government owned enterprise in the Purchaser’s country may participate only if they are legally and
financially autonomous, if they operates under commercial law, and if they are not a dependent agency of
the Purchaser.
2.4
The tenders shall clarify/state whether he/they are manufacturer, accredited agent or sole representative
indenting principals name & address. The offers of firms who are not manufacturer or direct authorized
agent will be summarily rejected. Sub-distributors will not be accepted.
3.
3.1
3.2
3.3
Eligible Goods and Services
All goods and ancillary services to be supplied under the Contract shall be from their country of origin
For purposes of this clause, “origin “ means the place where the goods are mined, grown, or produced or
from which the ancillary services are supplied. Goods are produced when, through manufacturing,
processing or substantial and major assembling of components, a commercially recognized product results
that is substantially different in basic characteristics or in purpose or utility from its components.
The origin of goods and services is distinct from the nationality of Bidder.
4.
Cost of Bidding
4.1
The Bidder shall bear all costs associated with the preparation and submission of its bid, and Dean Gandhi
Medical College Bhopal (hereinafter referred to as “the Purchaser”) will in no case be responsible or liable
for these costs, regardless of the conduct or outcome of the bidding process.
-5-
B. The Bidding Documents
5.
Contents of Bidding Documents
5.1
The goods required, bidding procedures and contract terms are prescribed in the Bidding Documents. In
addition to the Invitation for Bids, the Bidding Documents include:
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
(j)
(k)
(l)
(m)
(n)
(o)
(p)
(q)
5.2
Instruction to Bidders (ITB);
General Conditions of Contract (GCC);
Special Conditions of Contract (SCC);
Bid Form;
Annexure-I ( Commercial Tax Clearance Certificate);
Annexure-II (Manufacture Authorization Form);
Annexure-III (Declaration / Undertaking Form);
Annexure-IV (Proforma for Performance statement);
Annexure-V (Annual Turnover Statement);
Annexure-VI (Specification of required. Various equipments
Annexure-VII (Performance Security form);
Annexure-VIII ( Contract Agreement form);
Annexure-IX (Details of Manufacturing Unit);
Annexure-X (Price Schedule); and
Annexure-XI (Price Schedule for CMC (include free labour repair, other service and spare parts);
Annexure-XII (Details of Service Centre in Bhopal / M.P.);
Annexure-XIII (Check list A,B,C);
5.3
The Bidder is expected to examine all instructions, forms, terms, specifications and annexure in the Bidding
Documents. Failure to furnish all information required by the Bidding Documents or submissions of a bid
not substantially responsive to the Bidding Documents in every respect will be at the Bidders risk and may
result in rejection of its bid.
The Bidding document is not transferable
6.
Clarification of Bidding Documents-
6.1
A Prospective Bidder requiring any clarification of the Bidding Documents may notify the Purchaser in
writing or by Fax at the Purchaser’s mailing address indicated in the invitation for Bids. The Purchaser will
respond in writing to any request for clarification of the Bidding Documents, which it receives not later than
10 days prior to the dead line for submission of bids prescribed by the purchaser.
7.
Amendment of Bidding Documents
7.1
At any time prior to the deadline for submission of bids, the purchaser may , for any reason, whether at it on
initiative or in response to a clarification requested by the prospective bidders, modify the bidding
documents by amendment.
The Prospective bidders will be notified of the amendment through mail, and will be binding on them.
7.2
6
7.3
In order to allow prospective bidders reasonable time in which to take the amendment in to account in
preparing their bids , the Purchaser, at its discretion , may extend the deadline for the submission of bids.
C.
Preparation of Bids
8.
Language of Bid
8.1
The Bid prepare by the bidder, as well as all correspondence and documents printed literature and leaflets
relating to the bid exchanged by the Bidder and the the purchaser shall be written and in English/Hindi
language. Numeric numbers should always be in english only.
9.Documents
9.1
Comprising the Bid
The bid prepared by the bidder shall comprise the following components :
(a)
A bid Form and price schedule completed in accordance with ITB Clause 10,11 and 12;
(b)
Documentary evidence established in accordance with ITB clause 13 that the bidder is eligible and is
qualify to perform the contract if its bid is accepted;
(c)
Documentary evidence established in accordance with ITB clause 14 that the good sand
ancillary services to be supplied by the bidder are eligible goods and services and conform to the
bidding documents ; and
(d)
Bid Security furnished in accordance with ITB clause 15
10. Bid Form
10.1
The Bidders shall complete the Bid form and the appropriate Price Schedule Furnished in the Bidding
Documents indicating for the goods to be supplied, a brief description of the goods, their country of origin
and prices.
11.
Bid prices
11.1
Bid has been called for the various equipments / machines given in the specification in technical annexure
VI The bidder should quote the price for the equipments/machines offered for. The specification of the
equipments/machines should be as per details given in annexure VI Any variation on lower side may result
in the rejection of the tender.
11.2
Prices (inclusive of excise duty/ custom duty transportation packing, insurance, installation, training,
loading.- Unloading warranty service charge , inspection and any incidental charges, but exclusive of
CST/VAT) should be quoted for each of the required equipments/ machine separately on door delivery basis
according to the unit ordered. Tender for the supply of equipments etc. with cross condition like “AT
CURENT MARKET RATES “ shall not be accepted. Handling, clearing, transport charges etc. shall not be
paid . The delivery should be made as stipulated in the supply order placed with successful bidders
conditional tenders will not be accepted.
11.3
Each bid must contain the unit price of each equipment in digits as well as alphabets. Any discrepancy
between the figures and words, the amount written in words will prevail. Alterations/over-writings, unless
legibly attested by the tenderer, shall disqualify the tenders. The tenders should be signed by the tenderer
himself/themselves or his/their authorized agent on his/their behalf (Authorization may be enclosed, if
applicable) under his stamp. The tenderers should take care that the rates and amounts are written in such a
way that interpolation is not possible, no blanks should be left which would otherwise, make the tender
redundant.
11.4 The price quoted by the bidders shall not, in any case exceed the controlled price, if any, fixed by the
7
Central/State Government and the Maximum Retail DGS & D Price (MRP) Rate Constricting Authority at
its discretion, will exercise, the right to revise the price at any stage, on lower side so as to confirm to the
controlled price or MRP as the case may be. This discretion will be exercised without prejudice to any other
action that may be taken against the bidder.
11.5
11.6
To ensure sustained supply without any interruption the The purchaser, reserves the right to split
orders for supplying the requirements among more than one bidders, provided the prices and other
conditions of supply are equal.
The prices quoted and accepted will be binding on the bidder for the stipulated period and any increases
in the
price will not be entertained till the completion of this tender period. Cross Conditions
such as “SUBJECT TO AVAILABILITY” “ SUPPLIES WILL BE MADE US AND WHEN
SUPPLIES ARE RECEIVED” etc., will not be considered under any circumstances and the tenders of
those who have given such conditions shall be treated as incomplete and Tender will be summarily rejected.
12.
Bid Currencies
12.1
Prices shall be quoted in Indian Rupees.
13.
Documents establishing Bidder's eligibility and qualification
13.1
Pursuant to ITB Clause 9, the Bidder shall furnish, as part of its bid, documents establishing the bidder's
eligibility to bid and its qualification to perform the Contract if its bid is accepted.
13.2
The documentary evidence of the Bidder's qualifications to perform the Contract if its bid is accepted, shall
establish by “the Purchaser” satisfactions.
(a)
Bids may be submitted by the primary manufacture or importer or their authorized distributor
provided the bid is accompanied by a duly notarized letter of authority from the primary
manufacturer/importer. In case of authorized distributor the bidder should have minimum three
years association with manufacturer / importer (as per authorization form given in Annexure II)
(b)
Documentary evidence for the Registration of the company with details of the Name, Address,
Telephone Number, Fax Number, E-mail Address of the Managing Director / Partners / Proprietor
and Name, Address, Telephone number, fax, email of primary manufacturer/ The instruments such
as power of attorney, resolution of board etc., authorizing an officer/person of
the bidder should be submitted with the tender and such Authorized officer/person of the bidder
should sign the tender documents. Authorization letter nominating a responsible person of the
bidder to transact the business with the purchaser.
(c)
The bidder shall submit printed original catalogues of primary manufacturer and any other technical
documents like data sheet or operational manual of equipment with highlighting the features in
portal along with the other documents. In catalogue, the quoted product number and name should be
highlighted and item code should also be written with catalogue, against which that product is
quoted. These documents are also to be submitted in physical form before due date along with Bid
security. Specification of equipments supplied should match the specification in catalogue. Leaflets,
literatures, should invariably be attached for ready reference clearly marking the item code no.
(d)
The Bidder/manufacturer should have at least three years manufacturing / distributorship experience.
The Bidder should submit a list of user of quoted equipments manufactured by the Principal
Manufacturer for last three years. These list should also contain the supplies related to the Govt.
hospital/ Medical Colleges / Public Sector undertaking / Undertaking hospital and other institutions
of repute. Bidder should submit details of installation in Annexure IV.
(e).
The bidder should have at least one service centre in Madhya Pradesh, with a team of trained service
engineer/technical staff the details in this regard as per Annexure-XII shall be submitted. In case at
the time of tender service centre is not available in M.P., then he shall submit undertaking to
establish the service centre before the award of contract.
(f).
The bidder shall submit the specification's compliance / deviation report duly filled and signed
which clearly bring out the deviation from the specification if any 'given in Annexure-VI.
(g).
Sales Tax / VAT Clearance certificate, as on 31.03.2011/12 (as per form attached in
Annexure-I).
(h).
Details of Manufacturing Unit I Annexure - IX. The details containing the name and address of the
premises where the items quoted are actually manufactured.
(i).
Documents, if any, to show that the manufacturing unit/importer has been recog11ized, by WHO,
UNICEF, ISO/ or any other Certificate The bidder should also submit national and
international quality certificates like ISI/CE/C" mark/IEC standard or equivalent certificate of
quoted product, if available.
j.
The bidder shall furnish a notarized affidavit in the format given in Annexure-III declaring that the
bidder accepts all terms and conditions of the tender.
k. .
Annual turnover (i.e. turnover for each year separately) in the last three financial years shall not be
less than Rs.100.00 Lacs .for Manufacturer and Rs. 50.00 Lacs for the authorized distributor.
Annual turnover statement for 3 years submitted in the format given in Annexure- V certified by the
Auditor/CA.
In case of imported equipment IEC certificate of importer / bidder shall be submitted.
l.
m.
Concern / Company have not been debarred / blacklisted either by The purchaser or by any State
Government or Central Government Organization for the quoted product or as a whole. Affidavit to
this effect shall be submitted by the concern / company.
n.
All documents should be seal and stamped.
14. Documents establishing Goods Eligibility and Conformity to Bidding Documents
14.1 Pursuant to Clause 9, the Bidder shall furnish, as part of its bid, documents establishing the eligibility
and conformity to the Bidding Documents of all goods and services, which the Bidder proposes to
supply under the Contract.
15. Bid Security
15.1 Pursuant to ITB Clause 9, the Bidder shall furnish, as part of its bid, the bid security which shall be
equal to 3% of the total aggregate value of Item's of Equipments tendered for, subject to a maximum
of Rs 3.00 Lacs . ( Rs. three Lacs Only) No concession / exemption shall be allowed F.D.R. should
be attached. The aggregate values of items tendered for and 3% amount of it should be shown
separately in Envelop "A.
15.2
The bid security is required to protect the Purchaser Contracting Authority against risk of Bidder's
business conduct which would warrant the security's forfeiture, pursuant to ITB Clause 15.7.
15.3
The bid security shall be in Indian Rupees and shall be in form of Fixed Deposit for 18 months in
favour of Dean, Gandhi. Medical College, Bhopal: of any Nationalised Bank.
15.4
Any bid not secured in accordance with ITB Clause 15.1 and 15.3 above will be rejected by the "The
Purchaser" as non-responsive, pursuant to ITB Clause 23.
15.5
Unsuccessful Bidder's bid security will be discharged / returned as promptly as possible upon the
successful Bidders signing the Contract, pursuant to ITB Clause 31 or after the expiration of the
period of bid validity prescribed by the "The Purchaser" pursuant to ITB clause 16. No interest is
payable on bid security.
15.6
The successful Bidder's bid security will be discharged upon the Bidders signing the Contract,
pursuant to ITB Clause 30, and furnishing the performance security, pursuant to ITB Clause 31. No
interest is payable on bid security.
15.7
The bid security may be forfeited:
a.
If a bidder
(i) withdraws its bid during the period of bid validity specified by the Bidder on the Bid
Form;
b.
In case of a successful Bidder, if the Bidder fails:
(i) to sign the Contract in accordance with ITB Clause 30; or
(ii) to furnish performance security and Inspection Charges in accordance with ITB Clause
31.
Period of Validity of Bids
Quoted Prices of Bids shall be valid for 180 (One hundred eighty) days after the date of bid opening
prescribed by The purchaser pursuant to ITB clause 21. A bid valid for a shorter period shall be
rejected by The purchaser as non-responsive. This price or negotiated price on acceptance shall
remain fixed till contract period or till further order.
16.
16.1
16.2
In exceptional circumstances, the purchaser may solicit the Bidder's consent to an extension of the
period of validity. The request and the responses thereto shall be made in writing. A Bidder may
refuse the request without forfeiting its bid security. A bidder granting the request will not be
required nor permitted to modify its bid.
16.3
No bid may be modified subsequent to the deadline for submission of Bids.
10
16.4
No Bid may be withdrawn in the interval between the deadline for the submission of Bids and
expiration of the period of bid validity specified by the Bidder on the Bid Form. Withdrawal of a bid
during this interval may result in the Bidders forfeiture of its bid security pursuant to ITB Sub-clause
15.7.
D. Submission of Bids
17.
Bid Stages
17.1
Bid should be submitted in following system and should furnish the following documents failing
which their bid shall not be accepted:Envelops - D: Main Tender Envelop
(E.M.D. in the form of F.D.R./DD only)
(1) Fixed Deposit for 18 Months 3% of total aggregate value of item or equipments tendered for as
E.M.D. (issued by Nationalized bank in the name of Dean, Gandhi Medical College Bhopal.
(Refundable). (Any other instrument for example like Cheque will not be accepted).
A statement of Aggregate value of total items tendered for and value of 3% (E.M.D. maximum of
Rs. one Lack.)
· Without submission of E.M.D. the. tender will be summarily rejected as per rules.
(2) Tender document fee if uploaded from website Rs 5000.)
· In no case the tender cost fee should be mixed with E.M.D. amount. Fee cost is not
refundable.
Essential Documents as mentioned below.
.
3.
The bidders have to submit name of the items, its code no. for which they are quoting in the price
bid. Such names and items code of the items should be submitted along with the technical bid falling which
the tendere4' price bid will not be opened. The bidder has to submit name of item and the code number in
the format given below.
Sr. No.
Item Code
Name of Equipment
4
Registration Certificate of the company with details of the Name, Address, Telephone Number, Fax
Number, e-mail address of the firm and of the Managing Director / Partners / Proprietor.
Authorization letter from manufacturer authorizing a person to transact a business with the purchaser.
The instruments such as power of attorney, resolution of board etc., authorizing an officer/person of the
bidder should be submitted with the tender and such Authorized officer/person of the bidder should sign the
tender documents.
5.
Bidders should have the registration under Commercial Tax Authority should be attached.
6.
Sales Tax VAT Clearance certificate, as on 31.03.2012 (as per form attached in Annexure-I).
(Note: Sales Clearance from sales tax department up to 31.03.2012 must be attached with this
annexure)
Annexure-II (Manufacture Authorization Form)
Annexure-III (Undertaking Form / Declaration Form)
Annexure-IV (Proforma for installation in last Three years of the manufacturers.
Annexure-V (Annual Turnover Statement)
Annexure- VI (Specification of Equipments)
Annexure - VII ( Performence Security form)
11
7.
8.
9
10.
11.
12.
13.
14.
15.
16.
17
Annexure - VIII ( Contract agreement for)
Annexure - IX (Details of Manufacturing Unit)
Annexure-X ( Price Schedule)
Annexure - XI (Price Schdule for CMC)
Annexure - XII (Details of Service Centre at Bhopal/M.P.)
18.
The bidder should also submit national & international quality certificates like ISI/CE/C ISO-9002, IP/BP
etc" mark / lEC standard or equivalent certificate of quoted product, if available.
Concern / Company have not been debarred / blacklisted either by the purchaser or by any State
Government or Central Government Organization. this effect shall be submitted by the concern /
company. Affidavit that the firm has no vigilance case / CBI case pending against him / s. Affidavit that
the firm has not supplied the same item at the lower rate than quo-~" tender to any Govt. / Semi Govt. or
any other organization.
19.
20.
Original Bid Form duly signed by authorized signatory as per Section V, duly sealed and
signed by the bidder on each page for acceptance of Terms and Conditions.Please submit Only Annexure V (as whole
tender documents from page No. 1 to 57)as acceptance of all terms and conditions of tender from page No. 1 to 57,
(This Section V page will be considered as acceptance of all tender terms and condition from the bidder)
(Save Paper Save Environment).
21.
Statement of good financial standing from bankers.
22.
In case of imported equipment IEC certificate of importer / bidder shall be submitted.
23.. Any other document if required.
24.
Technical/Financial bid documents must not be submitted with this envelope.
Envelop - B: (Technical Bid)This envelop must be submitted department wise.
(i)
Technical bid for the quoted equipments etc. should be signed and stamped on each page.
The bidder shall submit the specification's compliance / deviation report duly filled and signed which clearly
bring out the deviation from the specification if any given in Annexure-VI.
(ii)
A list of user of quoted equipments by the Principal Manufacturer for last three years. These
list should also contain the supplies related to the Govt. hospital/Medical Colleges / Public
Sector undertaking / Undertaking hospital and other institutions of repute. Bidder should
submit details of installation in Annexure IV
(iii) Literature of original catalogue of the product attached for reference in two copies.
(iv) Quality certificates such as CE/ US FDA product wise.
Envelop - C: (Financial Bid) This envelop must be submitted department wise.
i.
Financial bid for the quoted equipments etc. should be signed and stamped on each page (ANNEXURE-X)
ii.
CMC charges as per Annexure Xl.
iii.
Bidder should show recurring expenditure of each equipment separately.
All the three envelops sealed in main envelop i.e. marked ENVELOP-D"TENDERFOR
EQUIPMENTSETC."All the envelopes A, B. C. must be Wax sealed using sealing Wax and official seal,
sealed cello taped, moisture free and strong.
All the enclosures and photocopies should be self certified and stamped. i.
Reference No. of the tender
ii.
Tender regarding
iii.
Due date of submission of tender form
iv.
Due date for opening of the tender
12
v.
Name of the firm
NOTE:TENDERSUBMITTEDWITHOUTFOLLOWINGTHEABOVE'PROCEDURESWIL BE
SUMMARILYREJECTED.
13
17.2
PRICE BID-
The Bidder should furnish the following:
i)
The rate quoted per unit (landed price) in Annexure-X (Suggested sample proforma of price
schedule) shall be inclusive of Excise Duty / Custom Duty, freight, packing, insurance, inspection &
testing charges etc. exclusive of VAT and should be F.O.R. destination.
ii)
The rate quoted in column 8 of annexure (suggested sample proforma of price schedule) should be
for a unit and given specification. The bidder is not permitted to change / alter specification or unit
size given in the Annexure - X.
iii)
Bidder has to quote rates strictly for the items which are mentioned in the tender.
iv)
Rates quoted for items other than mentioned in the tender form then that particular item will not be
entertained.
v)
If a bidder has quoted same rates for an equipment manufactured by two different manufacturers
then the choice to make the contract from any of them or both will be the discretion of The
purchaser.
vi)
The rates of each item should be quoted in figures as well as in words also otherwise the tender is
liable to be rejected.
vii)
The bidder/parent company will have to inter into comprehensive Maintenance Contract (include
free labour, repair, other services & spare parts) for the next seven years after the expiry of three
years warranty period in Annexure - XI.
(viii) The bidder should quote equipments which will have guarantee / warranty of atleast 3 years,
equipments which have less than 3 years warranty will not be entertainment and so should not be
quoted.
ix)
18.
18.1
18.2
Bidder should show recurring expenditure of each equipment separately.
18.3
19.
Deadline for Submission of Bids
Bids will not be accepted after the time and date specified in the invitation for Bids (Section I).
The The purchaser may, as its discretion, extend the deadline for submission of the bids by
amending the Bid Documents in accordance with ITB Clause - 7 in which case all right and
obligations of the The purchaser and Bidders previously subject to the deadline shall thereafter be
subject to the deadline as extended.
The The purchaser will not be responsible for any delay or non-receipt of tender documents.
Late Bids
19.1
No Bid shall be considered after the last date and time of submission of bid
20.
Modification and Withdrawal of Bids
20.2
20.3
No bid may be modified subsequent to the deadline for submission of bids.
No bid may be withdrawn in the interval between the deadline for submission of bids and the
expiration of the period of bid validity specified by the Bidder on the Bid Form. Withdrawal of a
bid during this interval may result in the Bidder's forfeiture of its bid security, pursuant to ITB
Clause 15.7
13
E. Bid Opening and Evaluation of Bids
21.
Opening of Bids by the purchaser
Opening of Bid process:
21.1
Bid will be opened on the day, date & place specified by the The purchaser.
21.2
All bidders are entitled to be present at the date and time & place for opening of Bids.
21.3
Only one representative of each Bidder is entitled to remain present at the time of bid opening.
Bidder's representative who is present shall sign a register evidencing his/her attendance. In the
event of the specified date of Bid opening being declared a holiday for the The purchaser, the Bids
shall be opened at the appointed time and location on the next working day.
21.4
Opening of bid will be sequential process.
21.5
Bids will be opened in the presence of Bidder's representatives who choose to attend on the
specified date and time fixed for opening the bid. Envelop D containing envelop A, B and C,
E nvelop " A", will be immediately opened. Documents together with contents of envelop A will
be subject to scrutiny, those bidders whose documents and contents are as per tender conditions
will only be deemed qualified for opening of technical bid. The date and time of opening of
technical bid (envelop B) will be made available on website at the earliest of opening of bid and
will be communicated simultaneously to those who qualify for opening of bid. Technical and
Price bid will be submitted separately. Technical Bid will be evaluated as per specification and
NCB terms and conditions by the Technical Committee. Those bidders who qualify for the
technical bid will be invited for· demonstration of equipment on the day, date & place specified
by the purchaser. The bidders will have to demonstrate the equipments on the date, day and place
specified, failing which their bid will be rejected. Thereafter, Price Bid (envelop C) will be opened
only for those bidders whose bid will be found technically responsive after demonstration.
Opening of date of price bid will be communicated separately only to those who qualify and will
be displayed on the specified website.
21.6
The Bidders' names, presence or absence of the requisite bid security will be announced at the
opening of Technical Bid.
21.7
Bidders who were found eligible on satisfying the criteria for technical evaluation and inspection by
the technical committee can only be invited to be present at the date and time for opening of Price
Bid of the tender.
14
22. Clarification of Bids
22.1
During evaluation of bids, the The purchaser may, at its discretion, ask the Bidder for clarification
of its Bid. Any clarification submitted by a bidder in respect to its bid and that is not in response to
a request by the The purchaser shall not be considered. The request for clarification and the
response shall be in writing and no change in prices or substance of the bid shall be sought, offered
or permitted except to confirm the correction of arithmetic errors discovered by the The purchaser
in the evaluation of the bids.
23.
Preliminary Examination
23.1
The the purchaser will examine the bids to determine whether they are complete, whether any
computational errors have been made, whether required sureties have been furnished, whether all
documents are there, whether the documents have been properly signed, and whether the bids are
generally in order.
23.2
The purchaser may waive any minor informality or non-conformity or irregularity or omissions in a
bid which does not constitute a material deviation, provided such a waiver does not prejudice or
affect the relative ranking of any Bidder.
23.3
Prior to the detailed evaluation, pursuant to ITB Clause 24, the The purchaser will determine the
substantial responsiveness of each bid to the bidding documents. For purposes of these Clauses, a
substantially responsive bid is one which conforms to all the documents terms, conditions and
specifications of the bidding documents without material deviations. The Rate Contracting
Authorities determination of a bid's responsiveness is to be based on the contents of the bid itself
without recourse to extrinsic evidence.
23.4
24.
If a bid is substantially responsive, the The purchaser may request that the bidder submit the
necessary information or documentation, within a reasonable period of time to rectify nonmaterial
nonconformities or omissions in the bid related to documentation requirements.
Such omissions shall not be related to any aspect of the price of the bid. Failure of the bidder to
comply with the request within the stipulated time may result in the rejection of its bid.
If a bid determined as not substantially responsive, it will be rejected by the The purchaser and may
not subsequently be made responsive by the bidder by correction of the nonconformity.
Evaluation and Comparison of Bids
24.1
The purchaser will evaluate and compare the bids previously determined to be substantially
23.5
responsive, pursuant to Clause 23. Bids will be evaluated with reference to various criteria as
15
Specified in bid document and one of such criteria is that the rate per unit of (landed price) i.e. rate
per equipment for determining the Lt rate (Lowest rate).
24.2
25.
25.1
Purchase will also be made from SC / ST firms as per State Government rules.
Contacting the The purchaser
Subject to ITB Clause 22, no Bidder shall contact the The purchaser on any matter relating to its
bid, from the time of the bid opening to the time Rate Contract is awarded.
25.2
Any effort by a Bidder to influence the The purchaser in its decisions on bid evaluation, bid
comparison or contract award may result in rejection of the Bidder's bid. If the bidder wishes to
bring additional information to the notice of the The purchaser, it should do so in writing.
F. Award of Contract
26.
26.1
Post Qualification
Based on the qualification criteria listed in ITB Clause 13, the The purchaser will determine to its
satisfaction whether the Bidder selected as having submitted the lowest evaluated responsive bid is
qualified to satisfactorily perform the Contract.
26.2
The determination will take into account the Bidder's financial, technical, and production
capabilities. It will be based upon an examination of the documentary evidence of the Bidder's
qualifications submitted by the Bidder. Pursuant to ITB Clause 13, as well as such other
information as the The purchaser deems necessary and appropriate.
26.3
The The purchaser shall ask for demonstration of the quoted equipment. The cost of demonstration
shall be born by the bidder. Day, date & place of demonstration shall be decided by R.C.A.
26.4
An affirmative determination will be prerequisite for award of the Rate Contract to the Bidder. A
negative determination will result in rejection of the Bidder's bid in which event the The purchaser
will proceed to the next bid to make a similar determination of that Bidder's capabilities to perform
the contract satisfactorily.
26.5
The tenderness shall demonstrate the quoted model of the equipments during the technical
evaluation on the day, date & place specified, failing which their bids/offer shall be rejected.
27.
Award Criteria (Negotiation)
27.1
Subject to ITB Clause 29 - The the purchaser will award rate contract to the successful bidders on
lowest evaluated prices or the price approved by the Purchase Committee after negotiation from L,
bidder, whichever is lower, based on the performance, quality, capacity, quality control facilities,
delivery period, and geographical coverage of the supply etc.
16
If successful bidder shall not be capable, then in this respect the decision of the committee will be
final which may go up to L-3 bidder.
28.
Purchaser's Right to vary Quantities
28.1
The details of the required equipments etc. are shown in Annexure-VI. The quantity mentioned is
only the tentative requirement and may increase or decrease as per the decision of the Purchaser.
The rates quoted should not vary with the quantum of the order or the destination.
29.
The purchaser's Right to Accept any Bid and to Reject any or all bids
29.1
The purchaser reserves the right to accept or reject the tender for the supply of all items of
equipments or for anyone or more of the items of equipments tendered for in a tender without
assigning any reason, without thereby incurring any liability to the affected Bidder or Bidders or
any obligation to inform the affected Bidder or Bidders of the grounds for the. The purchaser's
action.
30.
Notification of Rate Contract
30.1
Prior to the expiration of the period of bid validity, the The purchaser will notify the successful
Bidder in writing by registered letter or fax or e-mail, that its bid has been accepted.
30.2
The notification of Rate Contract will constitute the formation of the Contract.
30.3
Upon the successful Bidder's signed Rate Contract pursuant to ITB Clause 31, the The purchaser
will promptly notify each unsuccessful Bidder and will discharges its bid security, pursuant to ITB
Clause 15.
30.4
If, after notification of rate contract, a Bidder wishes to ascertain the grounds on which its bid was
not selected, it should address it's request to the The purchaser. The The purchaser will respond in
writing to the unsuccessful Bidder.
31.
Signing of Rate Contract
31.1
At the same time the The purchaser will inform to the successful Bidder that its bid has been
accepted the purchaser will send the Bidder the Rate Contract Form provided in the bidding
document incorporating all agreements between the parties.
31.2
Within 10 days of receipt of the Notification of Rate Contract, the successful Bidder shall sign and
date the Contract on a non-judicial stamp paper of value of Rs. l00/- (stamp duty to be paid by the
Bidder) and return it to the purchaser.
17
31.3
The validity of Rate Contract will be one year and may be extended for further period as agreed
mutually unless revoked.
32.
Performance Security & Inspection Charges
32.1
Within 15 days of the receipt of firm order from the purchaser or the date specified by the
purchaser, the successful Bidder shall furnish the performance security and inspection charges in
accordance with the Clause 7 of General Conditions of Contract.
32.2
Failure of successful bidder to comply with the requirement of ITB Clause 31 or ITB Clause 32.1
shall constitute sufficient grounds for the annulment of the award and forfeiture of the bid
security/previously deposited performance security and disqualify the firm to participate in the
tender for the next five years.
33. Placement of Supply Order
33.1
After finalization of the contract, the successful bidders may be asked to submit the delivery
schedule. as per requirement of the Purchaser. While placement of orders, the schedule given to the
bidders, along with the other conditions stated at 27.1 will be considered.
33.2
To ensure sustained supply without any interruption the Purchaser, reserves the right to split orders
for supplying the requirements among more than one L-l bidder.
34.
Corrupt or Fraudulent Practices
34.1
(i)
For the purpose of this provision, the terms set forth as follows:
"Corrupt practice" means the offering, giving, receiving or soliciting of any thing of value to
influence the action of a public official in the procurement process or in contract execution, and (ii)
"Fraudulent practice" means a mis-presentation , hiding of facts in order to influence a procurement
process or the execution of a contract to the detriment of the other bidders, and includes collusive
practice among Bidders (prior to or after bid submission) designed to establish bid prices at
artificial noncompetitive levels and to deprive the other bidders of the benefits of free and open
competition;
Will reject a proposal for award if it determines that the Bidder recommended for award has
engaged in corrupt or fraudulent practice in competing for the contract in question.
(iii)
(iv)
Will declare a firm ineligible, either indefinitely or for a stated period of time, to be allowed to
participate, awarded a contract if at any time determines that the firm has engaged in corrupt or
fraudulent practice in competing for, or in executing, a contract.
34.2
Furthermore, Bidders shall be aware of the provision stated in sub clause 21.4 of the General
Conditions of contract.
18
SECTIONIII:GENERALCONDITIONSOFCONTRACT
TABLEOFCLAUSES
Clause
Number
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Topic
Page Number
Definitions
Applications
Country of Origin
Standards
Use of contract documents and information
Patent Rights
Performance Security
Inspection and Tests
Packing
Delivery and Documents
Insurance
Transportation
Warranty
Payment
Prices
Change orders
Contract Amendments
Assignment
Delays in the Supplier's Performance
Liquidated Damages
Termination for default
Force majeure
Termination of insolvency
Termination for convenience
Resolution of disputes
Limitation of liability
Governing
Applicable law
Notices
Taxes and duties
Fall clause
Jurisdiction
19
20
20
20
21
22
22
22
22
23
24
24
24
24
27
27
27
28
28
28
28
28
30
30
30
31
31
31
31
32
32
32
32
General Conditions of Contract
1.
Definitions
1.1
In this Contract, the following terms shall be interpreted as indicated:
(a)
"Rate Contract" means the agreement entered into between the The purchaser and the Supplier, as
recorded in the Contract Forms signed by the parties, including all the attachments and appendices
thereto and all documents incorporated by reference therein for supply of material in agreed time
period.
(b)
"Price" means the price payable to the Supplier for the full and proper performance of its
contractual obligations.
(c)
"Goods" means all the equipments (Machines, instruments & Other Items) etc., which the supplier
is required to supply to the purchaser under the Contract.
(d)
"Services" means services ancillary to the supply of the Goods, such as. transportation and
insurance and any other incidental services, and other obligations of the Supplier covered under the
Contract.
(e)
"GCC" means the General Conditions of Contract contained in this section.
(f)
"scc" means the Special Conditions of Contract.
(g)
"The Purchaser" means the Organization purchasing the goods, as named in SCe.
(h)
"The Purchaser's Country" is the country named in SCC.
(i)
"The Supplier" means the individual or firm supplying the Goods and Services under this Contract.
(j)
"The purchaser" means the Dean Gandhi Medical College, Bhopal Chairman, Purchase Committee.
(k)
"The Project Site" where applicable, means the place or places named in SCC.
(l)
"Day" means calendar day.
2.
Applications
2.1
These General Conditions shall apply to the extent that they are not superseded by provisions in
other parts of the Contract.
3.
Country of Origin
3.1
All goods and services supplied under the Contract shall be specified their country of origin.
20
3.2
For purpose of this Clause "origin" means the place where the Goods are mined, grown or product,
or from which the Services are supplied. Goods are produced when, through manufacturing,
processing, or substantial and major assembling of components, a commercially recognized new
product results that is substantially different in basic characteristics or in purpose or utility from its
components.
3.3
The origin of Goods and Services is distinct from the nationality of the Supplier.
4.
Standards
4.1
The Goods supplied under this Contract shall confirm to the standards mentioned in the Technical
Specifications and when no applicable standard is mentioned, latest standards agreeable to the
purchaser. should be supplied.
4.2
Genuine EQUIPMENTS (Machinery, Instruments & Other Items) must be supplied. tenderers
should indicate the source of supply i.e. name & address of the manufacturers from whom the items
are to be imported.
4.3
While quoting the rates of MACHINERY, INSTRUMENTS & OTHER ITEMS etc. as enclosed
list, the name of the manufacturer, must be mentioned otherwise the tender is liable to be rejected.
4.4
The rates of every item should be quoted from standard and well reputed firms / companies and
they should be minimum possible.
4.5
For MACHINERY, INSTRUMENTS & OTHER ITEMS etc. means should bear quality assurance
certification like ISO 9002 of CE Mark of ISI standardization.products passing USFDA criteria
shall be preferred.
4.6
Software and Hardware Upgradation - Free Digital Up-gradation of software (all update &
upgrades) up to 5 years.
4.7
Voltage stabilizer or UPS & digital technology should be supplied with the equipments required it.
4.8
Technical specification of equipments / work mentioned is basic, however, equipments of higher
specifications may be quoted at no extra cost.
4.9
No change in make/manufacturer will be allowed at the time of supply. Changes resulting out of
technology upgradation of the same manufacturer can be permitted at no extra cost.
4.10
Circuit diagram with operator's and service manual must be enclosed along with the equipment.
4.11
Names of the institution in India, where quoted equipment / work has been supplied / installed and
working
satisfactory
done
during
last
three
years
must
be
attached.
21
4.12
The Bidders are not allowed to quote for equipments / components with less than desire
specification. Deviation from specification on lower / negative side shall not be considered if at any
time during evaluation / after supply of equipments / components are found below specification
EMD / performance guarantee shall be forfeited and action will be taken for black listing.
5.
Use of Contract documents and information
5.1
The supplier shall not, without the The purchaser's prior written consent, disclose the Contract, or
any provision thereof, or any specification, plan, drawing, pattern, sample or information furnished
by or on behalf of the The purchaser in connection therewith, to any person other then a person
employed by the supplier in performance of the contract.
Disclosure to any such employed person shall be made in confidence and shall extent only so far as
may be necessary, for purposes of such performance.
5.2
The Supplier shall not, without the The purchaser's prior written consent, make use of any
document or information enumerated in GCC Clause 5.1 except for the purposes of performing the
Contract.
5.3
Any document, other than the Contract itself, enumerated in GCC Clause 5.1 shall remain the
property of the The purchaser and shall be returned (in all copies) to the The purchaser on
completion of the Supplier's performance under the contract if so required by the The purchaser.
6.
Patent Rights
6.1
The Supplier shall indemnify the The purchaser against all third-party claims of infringement of
patent, trademark or industrial design rights arising from use of the Goods or any part thereof in
India.
7.
7.1
7.2
7.3
7.4
8.
Performance Security
The supplier shall furnish performance security in the amount specified in SCC to the purchaser as
specified in GCC 1.1 (g).
The proceeds of the performance security shall be payable to the purchaser as compensation for any
loss resulting from the Supplier's failure to complete its obligations under the Contract.
The Performance Security shall be denominated in Indian Rupees and shall be in the form of
Demand Draft/FDR/Bank Guarantee of Nationalized Bank located· in India in the prescribed form
provided in bidding document or another acceptable to the purchaser in favour of Purchaser till
completion of warranty period.
The performance security will be discharged by the purchaser and returned to the Supplier not later
than 90 days following the date of completion of the Supplier's satisfactory performance
obligations, including warranty obligations, unless specified otherwise in sec.
Inspection and Tests
22
If purchaser wishes:
8.1
The purchaser or its representative shall have the right to inspect and/or test the Goods to confirm
their conformity to the contract. The Special Conditions of Contract and/or the Technical
Specification shall specify what inspections and tests the purchaser requires and where they are to
be conducted. The purchaser shall notify the Supplier in writing of the identity of any
representatives retained for these purposes.
(i)
The Supplier shall notify the purchaser or its representative at least 10 days prior to the date when
Goods are available for inspection.
(ii)
The Supplier will provide to the purchaser or its representative all reasonable facilities for the
conduct of such inspections and tests at no additional cost to the purchaser. The Supplier may seek
an independent quality test report for batch ready for shipment. The cost of such tests will be borne
by the Supplier.
(iii)
Where the Supplier contests the validity of the rejection by the purchaser or his representative,
whether based on product or packing grounds, a sample drawn by the Inspection Authority will be
forwarded for analysis to an independent technical inspection. The Finding, which will be promptly
obtained, will be final and biding on both the parties. The cost of umpire analysis will be borne by
the losing party.
(iv)
The Purchaser's right to inspect, test and where necessary, reject the Goods after the Goods arrival
in at Site shall in no way be limited or waived by reason of the Goods having previously been
inspected, tested and passed by the purchaser or its representative prior to the Goods shipment from
the country of origin.
(v)
Nothing in Clause 8 shall in any way release the supplier from any warranty or other obligations
under this Contract.
9.
Packing
9.1
The Supplier shall provide such packing of the Goods as is required to prevent their damage or
deterioration during transit to their final destination as indicated in the' contract. The packing shall
be sufficient to withstand, without limitation, rough handling during transit and exposure to extreme
temperatures, salt and precipitation during transit and open storage. Packing case size and weights
shall take into consideration, where appropriate the remoteness of the Goods final destination and
the absence of heavy handling facilities at all points in transit.
The packing marking and documentation within and outside the packages shall comply strictly with
such special requirements as shall be provided for in the contract including additional requirements,
if any,
23
9.2
specified in SCC, Technical specification and in any subsequent instruction ordered by the Purchaser. .
10.
Delivery and Documents
10.1
The supply should be completed within 21 days from the date of supply order unless otherwise
specified in the supply order. Purchaser will place order by fax &/or e-mail &/or speed post.
10.2
It shall be the responsibility of the Supplier to make good for any shortage/damage at the time of
receipt at designated place.
10.3
The details of shipping and/or other documents to be furnished by the Supplier are specified in
SCC.
10.4 The delivery of EQUIPMENTS should be made at the point / place specified by the Purchaser in
Purchase Order.
10.5
the successful bidders should strictly adhere to the following delivery schedule Supply, Installation
& Commissioning should be effected within a fortnight from the date of supply and this clause
should be strictly adhered to failing which necessary administrative action as deemed fit under rules
will be taken against the defaulter.
10.6
Supply must be toto i.e. not in fraction.
11.
Insurance
11.1
The Goods supplied under the contract shall be fully insured in Indian Rupees against the loss or
damage incidental to manufacture, acquisition, transportation, storage, delivery, installation and test
running in the manner specified in SCC.
12.
12.1
12.2
12.3
13.
13.1
Transportation
Where the Supplier is required under the Contract to transport the Goods to Gandhi Medical
College/Sultania Zanana Hospital/Hamidia Hospital Bhopal defined as Project site, transport to
Bhopal including insurance as shall be specified in the Contract shall be arranged by the Supplier,
and the related cost shall be included in the Contract Price.
The loss or damage of material whatsoever, whether insured or not, during transit shall be made
good by bidder free of charge, failing which the losses will be deducted from their bill /
performance security.
Wharf age, demurrages etc. on account of incorrect or delayed dispatch of material or documents
shall be the responsibility of the supplier and shall be recovered from his bill / performance
security.
Warranty
The Bidder shall provide on site warranty of the' equipment for the period of three years from the
date of satisfactory installation. Warranty will cover services, repairs, maintenance, replacement of
24
spare parts, broken / damaged / worn out spare parts and other services free of cost during the
whole warranty period of three years. Warranty shall clearly indicate that what items covered by it
and item not covered in warranty. The warranty shall also include "on call service" which should
not exceed three days from the date of lodging of complaint. The purchaser shall have the right to
get the work done at the cost of bidder's responsibility, if machine is not repaired within three days.
13.2
The Purchaser shall promptly notify the Supplier in writing of any claims arising under the
warranty.
13.3
Upon receipt of such notice, the Supplier shall, with all reasonable speed, replace the sub standard
equipments, without cost and to the satisfaction of Purchaser.
13.4
If the Supplier, having been notified, fails to remedy the defect(s) within seven days, the Purchaser
may proceed to take such remedial actions as may be necessary, at the Supplier's risk and expense
and will have right to impose penalty without prejudice to any other rights which the Purchaser may
have against the Supplier under the Contract.
13.5
13.6
The stores supplies shall be strictly in accordance with the Specifications / Standards and shall be of
the best quality. The stores are demanded to carry the Supplier's own guarantee of the items by the
consignee.
If at any time during/after the supply if equipment is not found as per specification, sub standard or
refurbished the bidder shall replace defective equipment at his own cost, immediately, failing which
the total amount is recoverable from him and he will be black listed.
13.7
UPTIME GUARANTEE: The firm should provide uptime guarantee of95%.
13.8
Downtime penalty Clause:
During the Guarantee / Warranty period, desired uptime of 95% of 365 days (24 hours), if
downtime exceeds 5%, penalty in the form of extended warranty, double the number of days for
which the equipment goes out of service will be applied. The vendor must undertake to supply all
spares for optimal upkeep of the equipments for at least THREE YEARS after handing over the
unit to the Institute. If accessories /other attachment of the system are procured from the third paIty
, then the vendor must produce cost of accessory/other attachment and the CMC from the third
party separately along with the main offer and the third party will have to sign the CMC with
the Purchaser if required. In no case instrument should remain in non working condition for more
than 7 days, beyond which a penalty of 2 % of machine cost will be charged per day. The
Principals or their agents are required to submit a certificate that they have satisfactory service
arrangements and fully trained staff available to support the uptime guarantee.
13.9 Guarantee I Warranty period: The tenderers must quote for 3 years warranty from the date of
completion of the satisfactory installation.
25
Also the Bidders should submit their quote for subsequent 7 years) / CMC (include free labour,
repair, other services & spare parts). Failure to comply this condition will entail the rejection of
the Bids. The price comparison shall be made taking into account on basic price and post
warranty / CMC.
.
So the price of CMC should be quoted according to the cost of equipment.
13.10 SPARE PARTS: The spare parts should be of standard quality. The bidder must take guarantee of
availability of supply of spare parts upto 10 years.
13.11 TRAINING: Training of equipments within the stipulated time should be done by the supplier at his
cost. The time & place of training shall be stipulated by purchaser. Training should be of 2 doctors
and 2 technicians of user department.
13.12 The Tenderers should clearly indicate the name of the Manufacturers / Beneficiary of the Letter of
Credit, country of origin, place of shipment / air freightrnent etc.
13.13 Local agents quoting on behalf of their foreign suppliers must attach authority letter in their favour.
13.14 Successful tenderers will have to furnish performance Bank Guarantee for 10% contract value from
any Nationalized Bank valid for the warranty period.SUBJECT TO MAXIMUM OF 2 LAKCS PER
DERARTMENT
13.15 The rates quoted for the Stores Equipments, under the reference, by the supplier shall in no event
exceed the lowest price at which the suppliers of the Stores / Equipments of identical description
are made to any other person / organization / institution during the period and should attach an
undertaking.
13.16 Equipment should be brand new & of latest technology along with digital technique wherever
applicable.
13.17 The the purchaser reserves the right to increase the accessories and their numbers, payment will be
made only for ordered accessories. Bidder shall enclose undertaking from the company providing
the equipments that it will undertake to provided warranty/ /CMC for the required period of
time.
26
14.
Payment
14.1
14.2
14.3
14.4
14.5
14.6
14.7
14.8
15.
15.1
15.2
16.
16.1
16.
The method and conditions of payment to be made to the Supplier under the contract shall be
specified in the SCC.
The Supplier's request(s) for payment shall be made to the Purchaser in writing accompanied by an
invoice describing, as appropriate, the Goods delivered and the service performed, and by
documents, submitted pursuant to GCC Clause 10, and upon fulfillment of other obligations
.stipulated in the contract.
Payments shall be made by the Purchaser after submission of the claim by the Supplier. All sincere
efforts will be made for payment of due amount which has been submitted to the purchaser within
30 days unless the situation being out of control of the purchaser. Performa invoice should also be
submitted.
Payment shall be made in Indian Rupees.
The payment of the claim / bill will be made after deduction of VAT as per rules of M.P.
Commercial Tax Act Section 34 and other taxes from the bill.
No payment shall be made for rejected Stores. Rejected items must be removed by the supplier
within two weeks of the date of rejection at their own cost and replace immediately. In case these
are not removed these will be auctioned at the risk and responsibility of the suppliers without any
notice.
Supply of equipments means - installation and commissioning and also test running at site. No
separate charges will be paid separately on this account.
Payment will be made after installation, commissioning and successful test running at the site, due
verification and subsequent satisfactory report of the user department.
Prices
Prices charged by the Supplier for Goods delivered and Services performed under the Contract shall
not vary from the prices quoted by the Supplier in its bid.
Recurring expenditure of the machine / equipment should be mentioned.
Change orders
The The purchaser may at any time, by written order given to the Supplier pursuant to GCC Clause
29 make changes within the general scope of the Contract in anyone or more of the following:
1.
the method of shipping or packing, installation;
2.
Any other terms & conditions in public interest.
16.2
If any such change causes an increase or decrease in the cost of, or the time required, for the
Supplier's performance of any provision under the Contract, and equitable adjustment shall be made
in the Contract Price or delivery schedule or both and the Contract shall accordingly be amended.
Any claims by the Supplier for adjustment under this clause must be asserted within fifteen (15)
days from the date of the Supplier's receipt of the Purchaser's change order.
16.3
The Purchase Orders on approved rates will be placed by the Purchaser.
27
17.
17.1
Contract Amendments.
Subject to GCC Clause 16, no variation in or modification of the terms of the Contract shall be
made except by written amendment signed by both the parties.
18.
Assignment
18.1
The Supplier shall not assign, in whole or in part, its obligations to perform under the Contract,
except with the Purchaser's prior written consent.
19.
Delays in the Supplier's Performance
19.1
Delivery of the Goods and performance of the Services shall be made by the Supplier III
accordance with the time schedule specified by the Purchaser in the Supply order.
19.2
If at any time during performance of the Contract, the Supplier should encounter conditions
impeding timely delivery of the Goods and performance of the Service, the Supplier shall promptly
notify the Purchaser in writing of the fact of the delay, its likely duration and its cause(s). As soon
as practicable after receipt of the Supplier's notice the Purchaser shall evaluate the situation and
may at its discretion extend the supplier's time for performance.
19.3
Except as provided under GCC Clause 22, a delay by the Supplier in the performance of its delivery
obligations shall render the Supplier liable to the imposition of liquidated damages pursuant to
GCC Clause 20, unless an extension of time is agreed upon pursuant to GCC Clause 19.2 without
the application of liquidated damages.
20.
Liquidated Damages
20.1
Subject to GCC Clause 22, if the Supplier fails to deliver any or all the Goods or to perform the
services within the period(s) specified in the supply order, the Purchaser shall, without prejudice to
its other remedies under the Contract, deduct from the Contract Price, as liquidated damages, a sum
equivalent to the percentage specified in SCC of the delivered price of the delayed goods or
unperformed services for each week or part thereof of delay until actual delivery or performance, up
to a maximum deduction of percentage specified in SCe. Once the maximum is reached, the
Purchaser may consider termination of the Contract pursuant to GCC Clause 21.
21.
Termination for Default
Contract may be terminated by the Rate Contract Authority if:
21.1 If the supplier fails to execute the supply within the stipulated time, the Purchaser is at liberty to
make alternative purchase, in the event of making ALTERNATIVE PURCHASE, the supplier will
be imposed penalty apart from the forfeiture of Performance Guarantee. The excess expenditure
over and above contracted prices incurred by the Purchaser in making such purchases from any
28
other sources or in the open market or from any other supplier who has quoted higher rates and
other losses sustained in the process, shall be recovered from the Performance Security or from any
other money due and become due to the Supplier and in the event of such amount being
insufficient, the balance will be recovered personally from the Supplier. The penalty would be as
under:
1.
First extension 22nd day thereof from the date of issue of supply order - 3% of supplied
ordered item.
2.
Second & maximum extension for an additional 21 days from the date of issue of supply
order - 5% of supplied ordered item. .
21.2
The order may be cancelled after expiry of delivery period as mentioned in the supply order and the
supplier shall also suffer forfeiture of the Performance Security and shall invite other penal action
like blacklisting / disqualification from participating in present and future tenders.
21.3
The purchaser will be at liberty to terminate by assigning justifiable reason thereof the contract
either wholly or in part on one month notice. The Supplier will not be entitled for any compensation
whatsoever in respect of such termination.
21.4
If the Supplier, in the judgment of the The purchaser has engaged in corrupt or fraudulent practices
in competing for or in executing the contract.
F or the purpose of this Clause.
"Corrupt practice" means offering, giving, receiving or soliciting of anything of value to
influence the action of a public official in the procurement process or in contract execution.
"Fraudulent practice" means a mis-presentation / hiding of facts in order to influence a
procurement process or the execution of a contract to the detriment of the other bidders, and
includes collusive practice among Bidders (prior to or after bid submission) designed to establish
bid prices at artificial noncompetitive levels and to deprive the other bidders of the benefits of free
and open competition.
21.5
For infringement of the stipulations of the contract or for other justifiable reasons, the contract may
be terminated by the The purchaser, and the supplier shall be liable for all losses sustained by the
The purchaser, in consequence of the termination which may be recovered personally from the
supplier or from his properties, as per rules.
21.6
21.7
Non performance of any of the contract provisions will disqualify a firm to participate in the tender
for the next five years.
In all the above conditions, the decision of the. The purchaser shall be final and binding.
29
22.
Force Majeure
22.1 . Not with standing the provision of GCC Clause 19, 20, 21, the Supplier shall not be liable for
forfeiture of its performance security, liquidated damages, penalty or termination for default, if and
to the extent that, its delay in performance or other failure to perform its obligations under the
Contract is the result of an event of Force Majeure.
22.2
For purpose of this Clause, "Force Majeure" means an event beyond the control of the Supplier and
not involving the Supplier's fault or negligence and not foreseeable. Such events may include, but
are not limited to, acts of the The purchaser either in its sovereign or contractual capacity, wars or
revolution, fires, floods, epidemics, quarantine restrictions and freight embargoes.
22.3
If a Force Majeure situation arises, the Supplier shall promptly notify the The purchaser in writing
with adequate proof of such conditions and the cause thereof. Unless otherwise directed by the The
purchaser in writing the Supplier continue to perform its obligations under the Contract as far as it
is reasonably practical, and shall seek all reasonable alternative means for performance not
prevented by Force Majeure event.
23.
Termination for insolvency
23.1
The The purchaser may at any time terminate the contract by giving written notice to the Supplier,
if the, Supplier becomes bankrupt or otherwise insolvent. In this event, termination will be without
compensation to the Supplier, provided that such termination will not prejudice or affect any right
of action or remedy which has accrued or will accrue thereafter to the The purchaser.
24.
Termination for Convenience
24.1
The The purchaser, by written notice sent to the Supplier, may terminate the Contract, in whole or
in part, at any time for its convenience. The notice of termination shall specify that termination is
for the The purchaser's convenience, the extent to which performance of the Supplier under the
contract is terminated, and the date upon which such termination become effective. .
24.2
The Goods that are complete and ready for shipment within 21 days after the Supplier's receipt of
notice of termination shall be accepted by the The purchaser at the Contract terms and prices. For
the remaining Goods, the The purchaser may elect:
i)
ii)
to have any portion completed and delivered at the Contract terms and prices; and / or
to cancel the remainder and pay to the Supplier an agreed amount for partially completed
Goods and for materials and parts previously procured by the Supplier.
30
25.
Resolution of Disputes
25.1
The purchaser and the Supplier for the rate contracts & purchaser and supplier for supply order,
supply, delivery and payment and other issues shall make every effort to resolve amicably by direct
informal negotiations any disagreement or dispute arising between them under or in connection
with the Contract.
25.2
If, after thirty (30) days from the commencement of such informal negotiations, the The purchaser
and the Supplier & purchaser and the supplier have been unable to resolve, amicably a Contract
dispute, either party may require that the dispute be referred for resolution to the formal
mechanisms specified in the SCC. These mechanisms may include, but are not limited to,
conciliation mediated by a third party, adjudication in an agreed national or international forum,
and/or international arbitration.
i.
Any dispute or difference in respect of which a notice of intention to commence arbitration
has been given in accordance with this clause shall be finally settled by arbitration.
Arbitration may be commenced prior to or after delivery of the goods under the contract.
ii.
Arbitration proceedings shall be conducted in accordance with the rules of procedure
specified in SCC.
25.3
Notwithstanding any reference to arbitration herein the parties shall continue to perform their
respective obligations under the contract unless they otherwise agree.
26.
Limitation of Liability
26.1
Except in cases of criminal negligence or willful misconduct, and in the case of infringement
pursuant to Clause 6.
I.
27.
27.1
28.
28.1
the supplier shall not be liable to the The purchaser, whether in contract, tort, or otherwise,
for any indirect or consequential clause or damage, loss of use, loss of production or loss of
profits or interest costs, provided that this exclusion shall not apply to any obligation of the
suppliers to pay liquidated damages to the The purchaser, and
ii
the aggregate liability of the supplier to the The purchaser, whether under the contract, in tort
or otherwise, shall not exceed the total ordered price, provided that this limitations shall not
apply to the cost of replacing sub-standard/defective goods.
Governing Language
The contract shall be Written in English language. Subject to GCC Clause 28, English language
version of the Contract shall govern its interpretation. All correspondence and other documents
pertaining to the Contract which are exchanged by the parties shall be written in the same language.
Applicable Law
The Contract shall be interpreted in accordance with the laws of the Union of India.
31
29.
29.1
Notices
Any notices given by one party to the other, pursuant to this Contract, shall be sent to other party in writing,
confirmed in writing to the other Party's address specified in SCe.
29.2 A notice shall be effective when delivered or on the notice's effective date, whichever is later.
30.
Taxes and Duties
30.1 In case of any enhancement in Excise Duty due to notification of the Government after the date of
submission of tenders and during the tender period, the quantum of additional excise duty so levied will be
paid extra, if the rates of excise duty prevailing at the time of tender, has been shown extra and actually paid
by the supplier. For claiming the additional cost on account of the increase in Excise Duty, the supplier
should produce a letter from the concerned Excise authorities for having paid additional Excise Duty on the
goods supplied to Purchaser and also must claim the same in the invoice separately.
30.2 Suppliers shall be entirely responsible for all taxes, duties license fees, octroi, road permits, etc.
incurred until delivery of the contracted Goods to the Purchaser. However, Sales tax VAT (not surcharge in
lieu of Sales Tax/V AT) in respect of the transaction between the Purchaser and the Supplier shall be
payable extra, if so stipulated in the supply order.
31.
Fall Clause
31.1 . Prices charged for supplies under Rate Contract by the supplier should in no event exceed the lowest prices
at which he offers to sell or sells the stores of identical description to any other State Government / DGS &
D/ Public Undertaking during the period of the contract.
31.2 If at any time during the period of contract, the price of tendered items is reduced or brought down by any
law or Act of the Central of State government, the supplier shall be bound to inform The purchaser
immediately about such reduction in the contracted prices, in case the supplier fails to notify or fails to
agree for such reduction of rates, The purchaser will revise the rates on lower side. If there is a price
increase for any product after quoting the rates, the bidder will have to supply the item as per quoted rates.
This office will not accept any higher rates after wards.
31.3 If at any time during the period of contract, the supplier quotes the sale price of such Equipments or sells
such Equipments to any other State Govt. / DGS&D and Public Undertakings at a price lower than the price
chargeable under the rate contract he shall forthwith notify such reduction to The purchaser and the prices
payable under the rate contract for the Equipments supplied from the date of coming into force of such price
stands correspondingly reduced as per above stipulation however reduction shall not apply to :(a)
Export by the supplier
(b)
For all contracts entered into prior to the date of the tender or for any backlog of pending orders.
31.4 Within six months of the commencement of the rate contract and at the rate contract period a certificate in
the following forms will have to be submitted by the supplier :I/We certify that the stores of description identical to the store supplied to the Govt. of M.P. under the
contract herein have not been sold by me/us to any other State Govt. / Central Govt. / DGS & D / Public
Undertaking during the period of the rate contract of Madhya Pradesh under the contract! except for the
quantity of under sub-clause (a) & (b) of the clause 31.3.
32.
Jurisdiction
32.1 In respect of all disputes or claims related with Rate Contracts out of or under this contract, Bhopal Court
alone shall have jurisdiction to entertain the same.
32.2 In respect of all disputes or claims related with Supply, Payments and any other out of or under this
contract, the concerned Court of Purchaser's place shall have jurisdiction to entertain the same.
32
SECTIONIV:GENERALCONDITIONSOFCONTRACT
TABLEOFCLAUSES
Item No.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
13.
14.
15.
16.
17.
Topic b
Definition (GCC Clause I)
Performance security (GCC Clause 7)
Inspection and tests (GCC Clause 8)
Annual / Comprehensive Maintenance Contract) & training
Packing (GCC Clause 9)
Delivery and documents (GCC Clause 10)
Insurance (GCC Clause 11)
Payments (GCC Clause 14)
Prices (GCC Clause 15)
Liquidated damages & deduction in payments (GCC Clause 20)
Resolution of disputes (GCC Clause 25)
Supplier Integrity
Supplier's Obligations
Patent right (GCC Clause 6)
Progress of supply
Bid Form
33
Page
Number
34
34
34
35
36
36
36
37
37
37
38
38
38
38
39
40
SpecialConditionsofContract
The following special conditions of contract shall supplements the general conditions of contract
whenever there is a conflict, the provisions herein shall prevail, over those in the general conditions of
contract the corresponding clause numbers of the general conditions is indicated in parentheses.
1.
Definitions (GCC Clause 1)
GCC 1.1 (g) (a)
2.
The Purchaser is concerned Dean & Superintends of Associated Hospitals of
Gandhi Medical College, Bhopal which is also Good's Receiving Authority.
GCC 1.1 (i) (b)
The Supplier is the individual or firm supplying the Goods and Services under
this Contract.
GCC 1.1 (h) (c)
The Purchaser Country is India.
GCC 1.1 (1) (d)
The project site is as per supply order.
Performance security (GCC Clause 7)
2.1
The supplier shall be required to pay 10% performance security of the order value or maximum Rs.
15 lac which ever is less. The performance security should be paid upfront in respect of each supply
order or before the due date fixed by the Purchaser, valid up to the end of guarantee / warranty
period for performance obligations including warranty obligations.
2.2
Substitute clause 7.4 of the GCC by the following.
The performance security will be discharged by the Purchaser and returned to the supplier not later
than 90 days following the date of completion of the supplier's satisfactory performance obligations
including the warranty obligations under the contract.
2.3
Add as clause 7.5 to the GCC the following:In the event of any contract amendment, the supplier shall, within 07 days of receipt of such
amendment furnish the amendment to the performance security, rendering the same valid for the
duration of the contract as amended for further period of 60 days thereafter.
3.
Inspection and tests (GCC Clause 8)
If purchaser wishes:
A.
The inspections shall be carried out by the appointed Technical Committee or Inspection Agency at
the premises of the suppliers / go down or stores of the supplier / at point of delivery / installation.
Inspection and testing charges for the above purpose shall be borne by the supplier.
B.
Inspection note will be issued by the inspection committee verifying the specification, performance,
details of accessories supplied with the machine, test certificate issued by the respective authority
etc. as decided by the purchasing committee.
34
C.
The machine will be dispatched only after the inspection procedure has been followed and
inspection note issued to accept the consignment.
D.
The consignee may also draw the sample, at random, from the consignment within 45 days of their
receipts, and get them re-tested to satisfy whether the lots conform to the laid down specification. In
the event of the sample failing to conform to specification, the consignee shall reject the batch of
supply and inform the supplier for arranging replacement of the rejected batches at his own cost.
E.
When the inspection conducted on the premises of the supplier, all reasonable facilities and
assistance including access to drawing and production data shall be furnished to the inspectors at no
charge to the Purchaser.
In the event of the sample of EQUIPMENTS failing quality test and found to be not as per
specification the Purchaser is at liberty to make alternative purchase of the items, of
EQUIPMENTS for which the supply orders have been placed, from any other sources or in the
open market or from any other suppliers who might have quoted higher rate at Bid and the cost of
the supplier and in such cases the Purchaser has every right to recover the excess cost from
supplier's performance security.
F.
G.
H.
4.
4.1
If any items of equipments supplied by the supplier have been partially or wholly used or consumed
after supply and are subsequently found to be in bad order, unsound, inferior in quality or
description or otherwise faulty or unfit for consumption and if payment had already been made to
him then the contract price or prices of such articles or things will be recovered from the supplier,.
The supplier will not be entitled to any payment, whatsoever, for items of equipments found to be
NOT OF STANDARD QUALITY whether consumed or not and the purchaser is entitled to deduct
the cost of such equipments from any amount payable to the supplier. On the basis of nature of
failure, the product / supplier will be moved for black listing.
For equipments labelled as NOT OF STANDARD QUALITY, the concerned administration will be
informed for initiating necessary action against the supplier and that product shall be banned / black
listed and no further supplies will be accepted from him till he is legally discharged. The supplier
shall also not be eligible to participate in tenders for supply of such equipments for a period of five
subsequent years.
/ Comprehensive (include free labour, repair, other services & spare parts) Maintenance
Contract (CMC) & Training
Comprehensive (include free
lab our, repair, other services & spare parts) Maintenance Contract for the next seven years after the
expiry of three years warranty period in Annexure-XII.
4.2
The bidder shall provide operational training to Technician staff / operator for minimum of 3 days
by the expert or as instructed at the time of agreement.
4.3
The bidder should take guarantee of the availability of all spare parts for a minimum period of 10
years from the date of installation.
4.4
Genuine equipments and instruments etc. should be supplied. Tenderers should indicate the source
of supply i.e. name and address of the manufacturers from whom the items are to be imported.
35
5.
Packing (GCC Clause 9)
Add as clause 9.3 of the GCC of the following:Packing Instructions: The Supplier will be required to make separate packages for each Consignee.
Each package will be marked on three sides with proper paint/indelible ink, the following:
(i) Project (ii) Contract No. (iii) Country of Origin of Goods (iv) Supplier's Name; and (v) Packing
list reference number.
5.1
Packing should be able to prevent damage or deterioration during transit.
5.2
In the event of items of equipments supplied found to be not as per specifications in respect of their
packing, the Purchaser is at liberty to make alternative purchase of the items of equipments for
which the supply orders have been placed from any other sources or in the open market or from any
other bidder who might have quoted higher rates at the risk and the cost of the supplier and in such
cases the Purchaser has every right to recover the cost and imposes penalty as mentioned in GCC
clause 21.1.
Delivery and documents (GCC Clause 10)
6.
Upon delivery of the goods, the supplier shall submit the following documents to the Purchaser.
(i)
Three copies of the supplier invoice showing Goods description, quantity, unit price, and total
amount.
(ii)
Acknowledgement of receipt of goods from the consignee(s).
(iii)
Installation certificate signed by respective consignee.
(iv)
Manufacturer's / supplier's warranty certificate.
(v)
Inspection certificate issued by the nominated inspection agency, and the Supplier's factory
inspection report; and
(vi)
(vii)
Certificate of origin.
Photocopy of all test report of all equipments etc. should be submitted with every delivery challan.
7.
Insurance (GCC Clause 11)
For delivery of goods at site, the insurance shall be obtained by the supplier in an amount equal to
the value of the goods from final destinations as specified in the supply order of "All Risks" basis
including war Risks and strike.
Should any loss or damage occurs, the supplier shall:
(a)
Initiate and pursue claim till settlement, and
36
(b)
8.
Promptly make arrangement for replacement of any damaged items irrespective of
settlement of claim by the underwriters.
Payments (GCC Clause 14)
Payment for goods and services shall be made in Indian Rupees as follows:-
8.1
No advance payments towards cost of equipments etc. will be made to the supplier.
8.2
All payments shall be made by way of crossed cheques drawn in favour of the supplier.
8.3
All bills / invoices should be raised in triplicate in the name of Concerning Purchaser.
8.4
Payment will be made after completion of supply of goods / service as per supply order,
installation, commissioning and successful test running at the site, due verification and subsequent
satisfactory report of the user department. Payments shall be made by the Purchaser after
submission of the claim by the Supplier. All sincere efforts will be made for payment of due
amount which has been submitted to the purchaser within 30 days unless the situation being out of
control of / unforeseen for the purchaser. Proforma invoice should also be submitted.
8.5
FALL CLAUSE: if , at any time, during the said period, the supplier reduce the said prices of such
Stores/ Equipment or sales such stores to any other person/organization at a price lower than the
chargeable, he shall forthwith notify such reduction or sale to the PURCHASER and the price
payable for the Stores supplied after the date of coming into force of such reduction or sale shall
stand correspondingly reduced.
9.
Prices (GCC Clause 15)
Substitute clause 15.1 of the GCC with the following:
Prices payable to the supplier as stated in the contract shall not be subject to adjustment during
performance of the contract
10.
10.1
Liquidated damages & deduction in payment (GCC Clause 20)
For delay:
Substitute GCC clause 20.1 by the following:
Subject to GCC clause 20, if the supplier fails to deliver any or all the goods or perform the
,services within the time period(s) specified in the contract. The Purchaser shall, without prejudice
to its other remedies under the contract, deduct from the contract price as liquidated damages, as
shown below of the delivered price of the delayed goods or unperformed services for each week of
delay or part thereof until actual delivery or performance up to maximum deduction of 5% of the
delayed goods or services contract price. Once the maximum is reached, the purchaser may
consider termination of the contract.
A
First penalty: 22nd day from the date of issue of supply order - 3% of supply ordered item.
B.
Second penalty: After additional 21 days from the date of issue of supply order - 5% of
supply ordered item.
37
10.2
Purchaser has every right to receive supply even after expiry of delivery period as mentioned in the
supply order and in such case, liquidated damages will be levied @ 3% of the delivery price of the
delayed goods or unperformed services for each week of delay or part thereof until actual delivery
or performance.
10.3
Supply in damaged condition shall not be accepted. In case of damage in the packing, the supply
will be accepted only after levying penalty or replacement of damaged supply on the total value of
supply to that particular / other designated place.
10.4
Supply must be in toto i.e. not in fraction.
11.
Resolution of disputes (GCC Clause 25)
Add as GCC clauses 25A and 25.5 the following:
The dispute resolution mechanism to be applied pursuant to GCC clause 25 shall be as follows:
(a)
In case of dispute or difference arising between the The purchaser / Purchaser and supplier
relating to any matter arising out of or connected with this agreement, such disputes or
difference shall be settled in accordance with the Arbitration and Conciliation Act, 1996.
The Next Higher Authority shall be the Arbitrator.
The Venue of Arbitration shall be at concerned place of next higher authority of R.C.A / Purchaser.
Supplier Integrity
The supplier is responsible for and obliged to conduct all contracted activities in accordance with
the contract using state-of-the-art methods and economic principles and exercise all means available
to achieve the performance as specified in the contract.
25.4
25.5
13.
14.
Supplier's obligations
The supplier is obliged to work closely with the R.C.A. & Purchasers staff, act within its own
authority and abide by directives issued by the Purchaser and implementation activities.
The supplier will abide by the job safety measures prevalent in India and will free the purchase
from all demands or responsibilities arising from accidents or loss of life the cause of which is the
supplier's negligence. The supplier will pay all indemnities arising from such incidents and· will not
hold the Purchaser responsible or obligated.
The supplier is fully responsible for managing the activities of its personnel or sub contracted
personnel and will hold itself responsible for any misdemeanors.
The Supplier will treat all data and information about the The purchaser / Purchaser, obtained in the
execution of his responsibilities, in strict confidence and will not reveal such information to any
other party without the prior written approval of the The purchaser / Purchaser.
15.
Patent right (GCC Clause 6)
In the event of any claim asserted by a third party of infringement of copyright , patent, trademark
or industrial design rights arising from the use of goods or any part thereof in the Purchaser's
country, the supplier shall act expeditiously to extinguish such claim. If the supplier fails to comply
and the Purchaser is required to pay compensation to a third party resulting from such infringement,
the supplier shall be responsible for the compensation including all expenses court cost and lawyers
fees. The Purchaser will give notice to the supplier of such claim, if it is made, without delay.
38
16.
Progress of Supply
Supplier
:
(To be filled at the time of Contract Signature)
Supplier shall regularly intimate item wise progress of supply in writing, to the Purchaser as under:
·
·
·
·
·
Quantity offered for inspection and date:
Quantity accepted / rejected by inspecting agency and date:
Quantity dispatched / delivered to consignee and date:
Quantity where incidental services have been satisfactorily completed with date:
Quantity where rectification / replacement effected / completed on receipt of any
communication from consignee / Purchaser with date:
(In case of state-wise inspection, details required may also be specified).
39
SECTION V
Ref. Clause No. 17.1(p) of ITB
BIDFORM
This Bid Form is to be submitted against acceptance of
all terms and conditions of tender from page No. 1 to 57
(Save Paper Save Environment)
To,
The Dean,
Gandhi . Medical College
Bhopal, (M.P.)
i.
ii..
iii.
iv.
v.
vi.
vii.
viii.
ix.
x.
xi.
xii.
xiii.
I/We, the undersigned, declare that:
I/We have examined the bidding documents the receipt which is hereby acknowledged.
I/We have gone through all terms and conditions of the tender document before submitting the same. I/We hereby
agree to all terms and conditions as stipulated in the tender document and offer to supply and deliver ........ _.. . . . ... . .
. ... (Brief description of equipments) in conformity with the bidding documents in accordance with the schedule of
prices attached herewith and made part of this bid.
I/We undertake, if our bid is accepted, to deliver the goods in accordance with delivery period specified in the supply
order.
I/We agree to abide by this bid for a period of 180 (One Hundred Eighty) days after the date fixed for bid opening and
shall remain binding upon us and may be accepted at any time before the expiration of that date.
If our bid is accepted, we commit to obtain a performance security in accordance with GCC clause 7 & SCC clause 2
for the due performance of the contract.
Until a formal contract is prepared and executed, this bid together with your written acceptance thereof and your
notification of rate contract shall constitute a binding contract between us.
I/We undertake if at any time, it is found that any information furnished by us to the The purchaser, either in our bid
or otherwise, is false, the The purchaser servers the right to terminate the contract without assigning any reasons,
forfeiting the bid security or performance security and blacklisting us for a period of 5 years.
I/We understand that you are not bound to accept the lowest or any bid you may receive.
I/We hereby submit our tender for the
dated
I/We now enclosing herewith the E.M.D. No.
I/We have noted that overwritten entries shall be deleted unless duly cut & re-written and initialed.
Tenders are duly signed (No thumb impression should be affixed).
I/We undertake to sign the contract / agreement, if required, within 15 (fifteen) days from the date of issue of the
letter of acceptance, failing which our/my security money deposited may be forfeited and our/my name may be
removed from the list of suppliers.
Dated this ....................... day of .................... 2011.
(Signature) .................
(in the capacity of:............................)
Duly authorized to sign for and on behalf of....................
Witness
Witness
40
TABLEOFANNEXURES
Item
Topic
Page No.
No.
1.
Annexure - I (Sales Tax Clearance Certificate)
42
2.
Annexure - II (Manufacture Authorization Form)
44
3.
Annexure - III (Declaration / Undertaking Form)
45
4.
Annexure - IV (Proforma for Performance Statement)
46
5.
Annexure - V (Annual Turnover Statement)
47
6.
Annexure - VI (Specification of require equipments)
48
7.
Annexure - VII (Performance of Security Form)
49
8.
Annexure - VIII (Contract Agreement)
50
9.
Annexure - IX (Details of Manufacturing Unit)
52
10.
Annexure - X (The Price Schedule)
53
11.
Annexure - XI (Price Schedule for CMC)
54
12.
Annexure - XII (Details of Service Centre in M.P.)
55
13.
Check List
56
.
41
ANNEXURE-I
Ref. Clause No. 17.1 (g) of ITB
FORM OF CERTIFICATE OF SALES TAX / V A T VERIFICATION TO BE PRODUCE}) BY
AN APPLICANT FROM THE CONTRACT OR OTHER PATRONAGE AT THE DISPOSAL OF
THE GOVERNMENT OF MADHYA PRADESH
(Tobefilledupbytheapplicant)
01.
02.
03.
04.
Name of style in which the applicant is addressed or assessable to sales tax / VAT addresses or
assessment
a.
Name and address of all companies, firms or associations or persons in which the applicant
is
interested in his individual or fiduciary capacity
b.
Places of business of the applicant (all places of business should be mentioned)
The Districts, blocks and division in which the applicant is assessed to sales tax / VAT (all places of
business should be furnished)
a.
Total contract amount or value of patronage received in the preceding three years
2009-10
2010-11
2011-12
b.
Particular of sales - Tax / VAT for the preceding three years
Year
.
Total Turnover
be assessed
(Rs.)
Total Tax
Assessed
(Rs.)
Total tax
paid (Rs.)
Balance
due (Rs.)
Reasons for
Balance (Rs.)
2009-10
2010-11
2011-12
c.
If there has been no assessment in any year, whether any returns were submitted? if yes, the
division in which the returns were sent?
d.
Whether any penal action or proceeding for the recovery of Sales tax / VAT is pending?
e.
The name and address of Branches, if any:
f.
sales tax clearance up to 31.03.2012 issued by Sales Tax Department must be compalsory
attached with this annexure.
I declare that that the above information is correct and complete to the best of my knowledge and
belief
Signature of Applicant:
Address:
Date:
42
ANNEXURE - II
Ref. Clause No. 17.1 (q) ITB
MANUFACTURER'S AUTHORIZATION LETTER
No...................................... Dated. ..................
To,
Dear Sir,
Tender No.:
an established and reputable Manufacturers of having
We
factories at
_ and
do hereby agree to supply confirming to the required specification and
required quantity to M/s
(Bidder) as offered by them to supply against the above stated Tender.
We hereby extend our full guarantee and warranty as per Clause 15 of the General Conditions of
Contract for the supply against this invitation for Bid by the above firm.
Yours faithfully,
(name) for and on behalf of M./s
(Name of manufacturers)
Note: This letter should be signed by a person competent and having authority to sign on behalf of
manufacturer, and should be duly Notarized.
43
ANNEXURE - III
Ref. Clause No. 17.1 (T) of ITB
DECLARATION/UNDERTAKlNG
I/We/ M/s.
represented by its Proprietor / Managing Partner / Managing Director
having its Registered Office at
and its Factory Premises at
do declare that I/We have
carefully read all the conditions of tender in Ref. No. for supply of equipment, floated by the Purchase
Committee, and accept all conditions of Tender.
I/We agree that the Purchaser has rights of forfeiting the Bid Security and or Performance Security
Deposit and blacklisting me/us for a period of 7 years if any information furnished by us proved to be false
at the time of inspection and not complying to the tender conditions.
Signature of the Bidder
Name & Address in capital letters with Designation
TobeAttestedbyNotary.
45
ANNEXURE - IV
Ref. Clause No. 17.1(e) of ITB
PROFORMA FOR LIST OF INSTALLATIONS IN LAST THREE
YEARS OFTHE MANUFACTURER'S
Name of the Manufacturer
Sl.
No.
Name of the Purchaser &
Address with phone number
1
Name of installed
machines and model
2
Date of
installation
3
Quantity
4
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Signature and seal of the Bidder
46
Annexure-V
Ref. Clause No. 13.3(I) of ITB
ANNUAL TURNOVER STATEMENT
The annual Turnover of M/s ........................................................... for the past three years are given
below and certified that the statement is true and correct.
Turnover in Crore (Rs)
Sr. No.
Year
1.
2009-10
2.
2010-11
3.
2011-12
Turnover in Crores (Rs.)
Date :
Seal :
Signature of Auditor /
Chartered Accountant
(Name in Capital)
47
Annexure-VI
Ref. Clause No. 11.1 of ITB
SPECIFICATIONS OF EQUIPMENTS
Tender No.
Sr.
No.
1.
2.
Item
Code
Name of Item /
Equipment
48
Specification Compliance /
Deviations
ANNEXURE-VII
Ref. Clause No. 7.3 of GCC
PERFORMANCE SECURITY FORM
(to be filled after award of contract )
To: ...................................................... ...................... (Name of Purchase)
Whereas................................................................ .... (Name of Supplier)
hereinafter called "the supplier" has undertaken, in pursuance of Contract No. ......... dated...... 2012 to
.supply. ............................................ [description of goods and related services] hereinafter called "the
Contract" .
AND WHEREAS it has been stipulated by you in the said Contract that the Supplier shall furnish you with
a Bank Guarantee by a recognized bank for the sum specified therein as security for compliance with the
Suppliers performance obligations in accordance with the Contract.
AND WHEREAS we have agreed to give the Supplier a Guarantee:
THEREFORE, WE hereby affirm that we are Guarantors and responsible to you, on behalf of the Supplier,
up to a total of . (Amount of the Guarantee in Words and Figures) and we undertake to pay you, upon your
first written demand declaring the Supplier to be in default under the Contract and without cavil or
argument, any sum or sums within the limit of
(amount of Guarantee) as aforesaid, without
needing to prove or to show grounds or reasons for your demand or the sum specified therein.
This guarantee is valid until the.................................... day of....................... 2012
Signature and Seal of Guarantors
.......................................................................
.......................................................................
Date ...........................2012
Full Address of the Bank:
.................................................
.................................................
49
ANNEXURE-VIII
Ref. Clause No.3l of ITB
CONTRACTAGREEMENTFORM
(Tender No.
)
(to be filled after award of contract )
THIS CONTRACT AGREEMENT made the ...........................day of ........2012 between The purchaser
(Dean,Gandhi Medical College, Bhopal M.P.) (Name of The purchaser) of India (country of The
purchaser) (hereinafter called "the purchaser") of one part and
M/s ..................................... (name of supplier) of ........................................ (city and country of supplier)
(hereinafter called "the supplier") of the other part :
WHEREAS the The purchaser invited bids for certain goods and ancillary services viz.
EQUIPMENTS (Brief description of goods" and services) and has accepted a bid by the supplier for the
supply of those goods and services.
NOW THIS AGREEMENT WITNESSETH AS FOLLOWS:
1.
In this agreement words and expression shall have the same meaning as are respectively assigned to
them in the conditions of contract referred to :
2.
The following documents shall constitute the contract between the The purchaser and the supplier,
and each shall be read and construed as an integral part of the contract:
a.
This contract agreement:
b.
Instructions of contract:
c.
General conditions of contract:
d.
Special conditions of contract:
e.
Technical Specifications:
f.
The supplier's bid and original price schedules
g.
The The purchaser's notification of rate contract.
3.
This contract shall prevail all other contract documents. In the event of any discrepancy or
inconsistency with the contract documents, then documents shall prevail in the order listed above.
4.
In consideration of the payments to be made by the Purchaser to the supplier as hereinafter
mentioned, the supplier hereby covenants with the Purchaser to provide the goods and services and
to remedy defects therein in conformity in all respects with the provisions of the contract.
5.
The Purchaser hereby covenants to pay the supplier in consideration of the provision of the goods
and services and the remedying of defects therein, the contract price or such as may become
payable under the provisions of the contract at the times and in the manner prescribed by the
contract.
Brief particulars of the goods and services which shall be supplied / provided by the supplier are as
under:Sr.
Item
Item Description
Unit
F.O.R. Rate per
No.
unit (Rs.)*
Code
* The above rates are inclusive of excise duty, transportation, insurance, inspection & testing
charges and any incidental charges, but exclusive of CST/VAT.
50
6.
7.
8.
9.
10.
11.
12.
13.
The prices shall be valid for one year from the date of agreement, unless revoked and thereafter for
a further period as agreed upon mutually.
The supplier shall agree to deposit inspection and testing charges and service tax as per tender
conditions, in advance by cash /demand draft, against the value of supply order.
The supplier shall agree to deposit 10% performance security, along with as mentioned at point no.
7 (above), in advance by cash / demand draft / FDR / Bank Guarantee, against the value of
particular supply order for a period of 18 months.subject to maximum of 2 lacks department wise
The suppliers are not authorized to supply material directly to any state Govt. / Semi Govt. / any
other organization on the rate lower than the rate contract.
The supplier shall supply the goods directly to the indentor / purchaser at the address given in the
supply order.
The supplier shall raise bills directly in the name of indenting officer /purchaser against the supplies
made directly by them to the indentor's satisfaction in compliance with the conditions contained in
the supply order.
The supplier shall receive payment against its bill directly from the indenting department /
purchasing department. In case of Non-payment for the supplies made by supplier, they will
demand payment directly from the department / indentor concerned and in no case Purchase
Committee shall be responsible for the consequence for delayed payment or non-payment.
The supplier shall carefully read all the conditions of tender for supply of equipment, floated by the
Purchase Committee, and accept all terms and conditions in the tender document. Signing this
contract means that the supplier has read all the terms and conditions and abide by it.
IN WITNESS whereof the parties here to have caused this agreement to be executed III
accordance with their respective laws the day and year first above written.
That, in token of this agreement, both parties have today affixed their signature at Bhopal.
Signed, Sealed and delivered by the
Said..................................................... (For THE PURCHASER)
In the presence of:..................................................................
Signed, Sealed and Delivered by the
Said............................................................... (For the supplier)
In the presence of: ............................................................
51
ANNEXURE-IX
Ref. Clause No. 13.3 (D of ITB
DETAILS OF MANUFACTURING UNIT/AUTHORIZED
DISTRIBUTORS
Name of the Tenderer & Full Address
(Whether manufacturer / authorized distributor)
PAN number
Phone Nos.
Fax No.
E-mail Address
Date of Inception
Equipments Manufacturing / Distribution License No & Date
Issued by
Valid upto
CST / VAT Registration No.
If bidder is authorized distributor then
name, address, telephone, fax of
authorized manufacturer.
Name & Designation of Authorized Signatory
Signature of the Authorized Signatory
The details of manufacturing unit I authorized distributor shall be for the premises where items
QuotedareactuallymanufacturedIstoked.
52
ANNEXURE- X
Ref. Clause No. 17.2 of ITB
PRICES CHEDULE
Sr. Code
No.
(1)
(2)
Name of
Name of
Make
the
Manufacturer
&
Model
Equipment
No.
/ Item
(3)
(4)
(5)
Rate per unit
Rate of
Rate of
(Landed
Excise /
CST /
Price)
Custom
VAT as
Duty
(Inclusive of
applicabl
(included
excise /
e
custom duty, in quoted
transportation, rate per
unit)
insurance, and
any incidental
charges etc.)
(6)
(7)
(8)
Place :
Date :
Signature
Name in Capital Letters
Designation
Note : This format of price schedule is a sample for the Bidder's Price schedule should not be
submitted in Technical Bid, otherwise tender shall be rejected.
53
ANNEXURE- XI
Ref. Clause No. 17.2 (VII) of ITB
PRICE SCHEDULE FOR COMPREHENSIVE(INCLUDEFREE
LABOUR,REPAIR,OTHERSERVICES&SPAE PARTS)
MAINTENNACE CONTRACT(. /C.M.C.)AFTER EXPIRY OF
WARRANTY
(RATESSHOULDBEQUOTEDINPERCENTAGEOFTHEVALUEOFTHEMACHINE)
Sr.
No.
Code
No.
(1)
(2)
Name of For first
the
year
Equipment
with
spare
parts
and
labour
(3)
(4)
For
second
year
with
spare
parts
and
labour
(5)
For
third
year
with
spare
parts
and
labour
(6)
For
For fifth
fourthyear
year
with spare
with
spare
parts and
parts
labour
and
labour
(7)
(8)
For
sixth
year
with
spare
parts
and
labour
(9)
For
seventh
year with
spare
parts and
labour
(10)
Place :
Date :
Signature
Name in Capital Letters
Designation
Note : This format of price schedule is a sample for the Bidder's Price schedule should not be
submitted in Technical Bid, otherwise tender shall be rejected.
Prefer of CMC Separate perform Guarantee Three Years
54
ANNEXURE- XII
Ref. Clause No. 13.3 (g) of ITB
DETAIL OF SERVICE CENTER AT BHOPAL / M.P.
S.No.
Name & Place of
Service Center
Address, Telephone, Fax
& Email
No. of Service Engineer
with Name / Mobile No.
Remark
Name & designation of the authorized signatory signature of the
authorised signatory
55
CHECK LIST FOR ENVELOPE A (Must Be Submitted as Page-1)
Check list for Terms and Conditions (To be filled by the bidder and submitted along with E n v e l o p - A ) Page No. must be mentioned
against each serial.
S.No. Particulars
Yes
1.
2.
Check List Page One.
Covering Letter of company/ bidder
3.
4.
5.
6.
7.
8.
9.
10
11
12
13
14
15.
16
17.
18
19
EMD and Tender document fee.
The Bidder Should submit list of quoted item as per format given
20
Registration Certificate of Bidder (Such As Proprietor Ship, Partner, Article of Memo. etc )
Bidders registration under Commercial Tax Authority.
Annexure - I (Sales Tax Clearance Certificate)
Annexure-II (Manufacture Authorization Form)
Annexure - III (Declaration / Undertaking Form)
Annexure-IV Proforma for installation in last three years of the manufacturer.
Annexure - V (Annual Turnover Statement)
Annexure - VI Name and specification of iquipments)
Annexure - VII Parformence security form)
Annexure - VIII ( Contract aggreement form)
Annexure - IX (Details of Manufacturing Unit)
Annexure - X Price Schedule
Annexure – XI (Price schedule for CMC)
Annexure - XII (Details of Service Centre at Bhopal/M.P.)
The bidder should also submit national & international quality certificates like ISI/CE/C
ISO-9002, .X, IP/BP etc" mark / IEC standard or equivalent certificate of quoted product,
if available, products passing USFDA criteria shall be preferred.
Concern / Company have not been debarred / blacklisted either by The purchaser or by
any State Government or Central Government Organization. Affidavit to this effect shall
be submitted by the concern / company Affidavit that the firm has no vigilance case / CBI
case pending against him / supplier. Affidavit that the firm is not supply the same item at
the lower rate quoted in the tender to any Govt./ Semi Govt. or any other organization
56
No
Enclosure
No.
21.
Original Bid Form duly signed by authorized signatory as per Section V, duly sealed and
signed by the bidder on each page for acceptance of Terms and Conditions.Please submit
Only Annexure V (as whole tender documents from page No. 1 to 57)as acceptance of all
terms and conditions of tender from page No. 1 to 57, (This Section V page will be
considered as acceptance of all tender terms and condition from the bidder)
(Save Paper Save Environment)
22
23
Statement of good financial standing from bankers
In case of imported equipment IEC certificate of importer / bidder shall be submitted.
57
CHECK LIST FOR ENVELOPE B (TECHNICAL BID) (Must Be Submitted as Page-1)
Check list for Terms and Conditions (To be filled by the bidder and submitted along with E n v e l o p - B ) Page No. must be mentioned
against each serial. This envelop must be submitted department wise.
S.No. Particulars
Yes
1.
Check List Submitted as page No.1
2.
Technical bid for the quoted equipments etc. should be signed and stamped on each
page. The bidder shall submit the specification's compliance / deviation report duly
filled and signed which clearly bring out the deviation from the specification if any
given in Annexure-VI.
A list of user of quoted equipments by the Principal Manufacturer for last three years. Th
contain the supplies related to the Govt. hospital/Medical Colleges / Public Sector und
hospital and other institutions of repute. Bidder should submit details of installation i
3.
4.
Literature of original catalogue of the product attached for reference in two copies
58
No
Enclosure
No.
5.
Quality certificates such as CE/ US FDA product wise
CHECK LIST FOR ENVELOPE C (FINANCIAL BID) (Must Be Submitted as Page-1)
Check list for Terms and Conditions (To be filled by the bidder and submitted along with E n v e l o p - c ) Page No. must be mentioned
against each serial. This envelop must be submitted department wise.
S.No. Particulars
1.
Yes
Check List Submitted as page No.1
No
Enclosure
No.
1
2.
Financial bid for the quoted equipments etc. should be signed and stamped on each
page (ANNEXURE-X)
3.
CMC charges as per Annexure XI.
4.
Bidder should show recurring expenditure of each equipment separately.
DEAN,
GANDHI MEDICAL COLLEGE BHOPAL
59
INDEX
P.G.UPGRADATION
S.no.
01
02
03
04
05
06
07
08
09
10
11
12
13
Name of Department
Anatomy
Physiology
Biochemistry
Community Medicine
Forensic Medicine
Surgery
Paedi. Medicine
Anaesthesia
Medicine
Orthopaedics
Dermatology [skin v.d.]
Radiotherapy
Microbiology
Page No.
62-64
65-66
67-80
81-88
89-104
105
106-132
133-136
137-139
140-141
142-165
166-170
60
OTHER DEPARTMENTS
S.No.
01
02
03
04
05
06
07
Name of Department
ENT
Pathology
BLOOD BANK
PSM
Paediatric Surgery
Psychitary
Burn and Plastic surgery
Page No.
171-179
180-203
204-221
222-223
224-225
226-234
235-250
61
Department - Anatomy
S.No.
01
Item
Code
No.
ANT001
Name of Equipment
Mortuary Cooler
Specification
The Chamber for two and four dead bodied, temperature less than 5, insulation
pillycurethine foam , rooftop refrigeration unit with air cooler condenser,
electric supply 230+ 10 volts-50 hz. A vapour proff incandescent lamp, digital
type temperature indicator cum controller, rust proof body, door stainless
steel, stainless still tray in single pieces two and four respectably for both units
with tubular edge and handles, the assembly should have three pieces carriage
assembly which includes stationary frame and lower and upper carriage and
should ride on wheels. Minimum 20 installations in india and three in bhopal
service center in bhopal, three years warranty and service contract.
Accessories- Automatic voltage stabilizer 3KBA
02
ANT002
CADAVERIC INJECTION
MACHINE (EMBALING
MACHINE)
For injecting formaldehyde solutions in cadavers and much higher speed
than normal gravity process. Unit to be covered and mounted on a portable
trollery having four castor wheel for easy movement. Unit consisting of
one air compressor filled with half HP motor which is
connected with stainless steel tank of 10 liters capacity ment for storage and
injecting the solution. Tank to be fitted with safety valve, pressure gauge and
rubber tubing having provision for injection. Supplied with complete electric
cord plug suitable to work 220 volts 50 hz AC supply.
03
ANT003
DIGITAL VIDEO IMAGING
Color corrected with din plan optics.
SYSTEM
Resolution more than 400000 pixels high resolution chip, RCA, S-Video,
USG 2.0 output, high resolution built kin digital camera to produce brilliant
image. Video and digital signals can be obtained at the microscope base and
62
Comp./Divt.
displayed on TV set and PC monitor at same time
by high resolution CCP chip. Built in Mock / digit converter. 40x to 1000x
standard magnification range optionally up to 2000x with additional eye piece.
A versatile software for image depturing, processing and editing.
04
ANT004
DISTLLATION PLANT
01 GALLON MENERTY PER HOURS
05
ANT005
EMBRYLOLOGY
MODELS
Developing Heart
Dev. of Heart in 30 days embryo
Dev. of atria and Ventricles- At 4 weeks
Dev. Of atria and Ventricles- At 5 weeks
Dev. Of atria and Ventricles- At 8 weeks
Undifferentiated Genital System
Male UG system in 12 week embryo
Female UG System in 12 week embryo
Medium skeleton with
This model depicts the position. Course and distribution of
nerves and blood vessels main arteries and peripheral nerves of the human body.
Life size skeleton 170 cm Features nerve branches,Vertebral arteries and herniated
tall
lumber disc. Skull includes movable jaw, cut calvarium.
Life size skeleton with
Durable parts Stand with wheels
stand
Adult male pelvis with
Comparison between two sexes
stand
Adult female pelvis with Comparison between two sexes
stand
Female pelvic muscles
To get an integral knowledge of various important structures
and organs
Magnified human larynx Demonstrate movements of epiglattis and cartilages in the
model
voice box
Jumbo heart model
To understand external and internal features of heart and its
63
New style giant ear
model
Enlarged skin model
Giant eye model
Magnified human
pulmonary Alveoli
model
Model of transparent
lung segment
Larynx Heart and Lung
model
Model of the anatomical
nasal cavity
Liver model
relation with the large blood vessels
Shows the three main structural parts of the hearing organ and
the posistion of equilibrium organ of the body
Showing structure and appendages of skin
The different part of the eye ball model are detachable to
show its structures
This model shows relation and branches of principal bronchus
Shows bronco pulmonary segments and their arrangements
Separating into seven parts. The two lung have removable
lobes to show internal structures of heart
Removable parts to show external and internal features of
human nose
The complex vessels nwtwork in the open liver are displayed
in different color
To show external and internal futures.
Relation an opening of the ducts can be seen
Male urogenital system
Liver pancreas and
duodenum mode
Female urogenital system To show external features
Appendix and caecum
The model shows wall of the caecum and appendix Various
positions are described
Disco torso 15 slices
Horizontally sectioned in to 15 slices showing topographical
relations
Brain 8 part
DEtailed model divided medially showing external and
internal features
Brain Ventricles
Shows both side ventricles, the third and fourth ventricle
Spinal cord with nerve
Showing composition of spinal cord
ending
64
Department of Physiology
S.No.
1
Item Code No.
PHY-001
2
3
Name of Equipment
Specification
Manneqin for clinical exm.&
artificial respiration
This manikin provides maximum student/instructor
feedback in four practice mode: compression rate,
compression depth, and Ventilation duration and
ventilation volume. Red light indicates improper hand
placement. The performance of each skill is displayed
separately while averages are stored in the memory. With
the flip of a switch, memory unit evaluates performance
based
on
chilled
or
adult
CPR
standards.
The disposable tracheal airway and lower airway with
lung bag eliminate time consuming disinfection
procedures. Includes ten disposable airways, ten
disposable tracheal airways, and five sanitary face
masks.
PHY-002
Projection Microscope
NAC. Code BDI
With 200mm diam. Graduated screen 360 degree rota
table quadruple revolving nose piece total magnification
ranging 100X to 800X or 125X to 1000X.
Work able on 220 V AC main with variable light control
arrangement to eye piece with stage micrometer slide for
measuring optical combination built eye piece (10X, 15X)
objective 5X, 10X,20X,40X.
Advanced research model incorporated with binocular
head and pointer arrangement.
PHY-003
Anthropometric set
(complete with all type of calipars
Height, Weight recorder, Calipers for measuring skin fold
thickness’.
Calipers for measuring head circumference waist
circumference hip
Circumference and all accessories.
Accessories: Anthropometer Rod, Complete with
65
Comp./Divt.
scale and carrying bag for height measurement, Sliding
Calliper (POECH type), Cubic Craniophore, With built in
bone holder, Skin fold Calliper herpendent type, Skin
Folder, Skin guide, Finger & palm printing pad, complete
set,
4
PHY-004
Portable Spirometer
Data transmission : Rs 232 interface to Pc through SeMA
software.LCD display for graphical and numerical values.
5
PHY-005
Aesthesiometer
For Tactile Sensation(Von Freyes)
6
PHY-006
Dynamometer
-Hand spring (grip) dynamometer
7
PHY-007
Wright peak Flow Meter
Wrights peak floe meter:• Type of device: variable orifice peak flow meter
• Range: 50-800L/min
• Accuracy: better than 10%
• Scale interval: 10 L/min below 700, 20L/min above
• Measuring principle: piston/ spring and moveable
pointer
• Frequency response: profile A/B difference less than 15
L/min
• Cleaning: alcohol wipe
• Life in clinic use: annually
• Net weight: 74 grams
Dimension: 150X60X34 mm( including internal
mouthpiece)
8
PHY-008
Stethoscope Demonstration with
multiple ear pices
Stethoscope with a single chest piece and multiple ear
pieces for demonstration purposes
66
DEPARTMENT OF BIOCHEMISTRY
S.No.
1
2
Item Code No.
BIO-001
BIO-002
Name of Equipment
Automated High Speed
electrophoresis apparatus
Fully automated ELISA with
washer
Specification
With power pack
• Integrated Robotic sample processor built
in incubator elisa reader and automatic
washer with complete modular system.
• Should have an open system for different
make kits and manual over ride.
• Predilution facility should be present.
• Upto 256 samples can be assayed more
than one type of ELISA at same time.
• Parallel samples pipetting should be
present.
• Bar code reading facility for tubes should
be preferable.
• 6 litres with a range of 340-750 mm are
required.
• 12 measurement and 1 ref. channel.
• 16 way manifold washing with 4 wash
channels should be provided.
• Volume of wash liquid dispensed variable
and adjustable.
• Residual volume / well should be <2ul.
• User friendly software with option for
manual intervention.
• Tem. range room to 45 C+1 C.
• 4 plate incubator.
67
Comp./Divt.
• Liquid detection should be present.
• Clot dettection should be present.
• Color monitoring check should be
provided.
• There should be no carry over of sample.
• Password protection to prevent
unauthoried person access to software.
• CVT 0.5 KVA
• Printer to provide printed reports of
testes.
• Teflon coated stainless steel tip.
• Inbuilt quality control.
• Patient name, ID keyboard entry &
individual report printouts in present
format.
• File search by name ID no date Reg. no
etc.
• Training of laboratory staff for the
purchased equipment.
• Three years warranty 5 year
comprehensed AMC should be available
with service centres in close proximity.
• Availability of spares/ disposables for at
least 10 years.
• All consumables required for installation
and standardization of system to be given
free cost.
• List of users and satisfactory report of
quoted model from reputed institute
Government institute / Hospital.
• Should have all the accessories required
for the functioning of the equipment.
68
3.
BIO-003
Poly Acrylamide Gel Electro
phoresis Equipment
• ISI mark or other equivalent quality
certification.
• All electrical peripherals required for
smooth functioning e.g. voltage stabilizer
and UPS should be provided with the
equipment.
• There should
be
provision for
demonstration before final approval of
equipment.
(Page electrophoresis system)
Vertical and horizontal with universal power
pack)
Horizontal unit :
Dimension Gel plate size : 10.1x7.3 cm
Gel size
8.3x7.3 cm
Number of gels 1-4
Buffer tank
Main unit with single
molding casted with safety
lid
Tank volume
Upper volume : 160 ml for 2
gels set
Lower volume : 550 ml for 2
gels set
Casting units
Casting stand casting frames
Combs
Combs of variable size
Spacers
Spacer of varaible thickness
Electrodes
It must have fixed &
adjustable platinum
electrodes
Power cables
Should provide suitable
power cables
Typical run
45-50 min (at 200 V
time
constant)
69
Vertical unit
Dimension -
Gel plate size : 20x22.3 cm
Spacer plate : 10.1x8.2 cm
-18.3 x 20 cm
Gel size
18.3x20 cm
Get plate size- Inner plate width : 20 cm
Inner plate width : 20 cm
Outer plate width : 20 cm
Outer plate width : 23 cm
Number of gels 1-4
Buffer tank
Main unit with single
molding casted with safety
lid
Tank volume
Upper volume : 350 ml for
2 gels set
Lower volume : 1200 ml
for 2 gels set
Casting units
Leak proof casting stand
casting frames.
Combs
Combs of variable size
Spacers
Spacer of varaible
thickness
Electrodes
It must have fixed &
adjustable platinum
electrodes
Power cables
Should provide suitable
power cables
Typical run
5h
time
Cooling
Syst should include central
cooling core that can
reduce running time to 3.5
h
70
Accessories
Power
Supply
Output range
Volts
Output
terminals
Input
protection
Volt hour
control
Current
Power
Timer
Programmable
Methods
71
Flexing hubble, clamps,
alignment card system
should be useful to run in
2D electrophoresis setup
Should be compatible for
both submarine agarose
and vertical
acrylamide gel
electrophoresis
10-500 V easily
programmable and
adjustable
with 1 V steps
There should be
uninterrupted constant
voltage or current output
with automatic crossover
Atleast 4 pair recessed
banana jacks floating in
parallel
Fuse on both hot and
neutral
99.000 V-h
0.01-2.5 A adjustable with
1 A steps
1.500 W
1.999 min fully adjustable
There must recovery after
power failure
It should be atleast 10
methods with real time
Clock upto 10 steps each
Safety feature
4.
BIO-004
High performance liquid
chromatography (HPLC)
There should be no load
detection system.
Sudden load change
detection
Over load/short circuit
detection
Over voltage protection
Ground lead dection
Arc detection
System should be provided long with a
suitable (prefereably) APC make UPS with a
minimum capacity of 1 hour back up with a 3
years onsite warranty.
Warranty : Minimum five year free warranty
(or two years warranty and three years
comprehensive AMC) including free
placement and free repairs, without any
charges whatsoever within warranty period to
be pledged by the dealers suppliers Agents
etc.
I. Quarternary pump for semiprep work
• Operating pressure - upto 6000 psi
• Flow accuracy - <2%
• Flow precision - +0.1% RSD
• Flow rate - 0.01-40.00 ml / min
• No of eluents - 4
• Auto stat programming - Capability for
auto stat & multi method programming
storage of upto 1 complet method
parameter tables with external events.
• Composition range - 0-100%
• Composition accuracy - +0.5%
72
(independent of back pressure)
• Flow extendable to 45.00 ml/min
II Sample injection system with dual injector
option for analytica and semi prep analysis - For
analytical injector
III Degasser (optional) - In line
Flow rate analytical - 0.2-5.0 ml / min
Semi prep. analysis - 20-40 ml/min
IV. Detectors
a) UV - VIS Detector
• Wavelength range Complete UV-VIS
range
Demerin and / or
• Light source
tungsten
+0.35x10-5 all dry
• Noise
cell 254
2x10-4 AU hr.
• Drifit
<5% at 2.5 AU
• Linearity
5 nm
• Band width
10ul
• Flow cell
+1nm
• Accuracy
-0.1 nm
• Reproducibility
The detector should be have lamp optimization
software
b) Fluorescence detector.
200-900 nm
• Wavelength
range
Xenon lamp
• Light source
ul
• Cell volume
• Sean function
20 mm
• Band with
• Sensitivity S/N 800 nm
73
Raman pack of
water
c) Refractive index detector
1-1.75 R/U
• Refractive
index range
0.2-0-3 ml / min
• Flow rate
1.5x10-9 RIU
• Drift
Internal oven 300C to
• Temperature
550C
control
V. Column oven model - temperature range
ambient +4C to 600C
VI. Columns
250 x 4.6 mm
• C-18
250 x 4.6 mm
• C-9
250 x 20 mm
• C-18
250 x 20 mm
• Pre column
derivation
4.6 x250 mm
• Bio suit
7.8mm x 300 mm
• Protein pak
VII. Fraction collector
upto 150 ml/min
• Flow rate
• And
accessories
VIII. Software computer system
• Single point control of the entire HPLC
• Customizable data reports online help
wizards
• Report publisher.
IX. Coloured laser printer.
X. Water purification system (from tap water to
ultra water for HPLC)
XI. Laboratory establishment.
74
5.
BIO-005
Chromatography (ion
exchange) instrument
Technical specifications
Ion exchange type
Capta Q Impes
Quaterney a
minimum strong
anion
Sulfonate group,
strong cation
Fluid
Approx 400 cm/h( <4
bar or 04 mpa) or
approx 800 cm/l (<3
bar or .03 Mpa) in a
packed bed in a 1 m
diameter column
with 20 cm bed
height at 20C using
process buffer with
same viscosity as
water.
Average particle
36-44 um
size (d50)
Matrix
High flow agarose
Total ionic capacity
Capto Q hrpRes
.015-0.18mnol (Ci)
ml medium
Cap Sp
0.13-0.16 mmol ml
medium
Binding capacity
Capto Q Impsres
Capto Sp Res
pH Stability
Capto Q ImpRes
-2-14 (short term) 212 (long term)
Capto SP ImpRes
-3-14 (short term) 475
Chemical stability
Working temperature
Storage
Capto Q ImpRes
Capto SP ImpRes
12 (long term)
all commonly used
aqueous buffers 1 M
sodium hydroxide
8M urea 6 M guanide
hydrochloride. 30%
insopropanol and
70% ethanol.
40C to 300C
20% ethanol
20% ethanol 0.2 M
sodium acetate
HiTrap prepacked columns
Column volume
ml and 5 ml
Column
0.7x25 cm (1ml)
1.65x25 cm (5ml)
Dimensions
Column hardware
5 bar (0.5 Mpa,
73psi)
Pressure limit
Recommended fluid 1 ml/min (1ml) 5
ml/mi (5ml)
1. d50V is the average particle size of the
cumulative volume distribution.
2. Dynamic binding capacity at 10% break
through measured at a residence time of 4
minutes.
(150 cm/h) in a Tricom 5/100 column with 10
cm bed height in 50 mM tris pH 80 (BSA on
capta Q hmpres) 20 mM medium phosphate pH
7.2 (hysozyme) 50 mM pH (BSA on cap SP
ImpRes)
76
6
BIO-006
Water Deionizer
7
BIO-007
Refrigerated Centrifuge
machine
8
BIO-008
Electronic weighing machine
9
BIO-009
pH meter
3. Short term pH interval where the medium can
be subjected to cleaning or place with significant
change in function long pH interval where be
operated without significant change in function.
4. No significant change in capacity and carbon
content after 1 week storage in 1 M naOh at
400C.
Conductivity matter with linear scale and alarm
system to indicate the regeneration cycle operate
on AC/DC, mixed ion exchange resin column air
mixing system FRP/PVC chemical proof
regeneration tank PVC value arrangements all
houses in trolley mounted and chemical proof
metal stand rugged construction to with stand
any external accident and chemical corrosion
easily portable deionised water with have the
conductivity of less than 1 ms/cm and pH of 6.8
to 7 output / hrs in liter - 100 liter.
Centrifuge
machine
with
thermostat
temperature control.
1) Speed 4200 RPM or more & temperature
adjustable table with 1 degree centrifuge timer
1-99 min.
2) Digital display and adjustable parameters.
3) Minimum temperature 500C
4) Minimum warranty 3 years &
5) Availability of spare parts of 5 years.
Weighing capacity from micro gm to 220 grams
LED display
Accuracy : 0.01/0.1 mg.
pH meter
Model
pH -103
77
pH Range
pH resolution
pH Accuracy
Temperature
Compensation
mV
mV resolution
mV accuracy
0-14 pH
0.001 pH
+0.002 pH
0-100 deg C
+2000 mV
-0.1mV
0.2mV
Features
• Advanced microcontroller based design.
• Display of pH mv temp on backlite LCD.
• RS-232 interface
• Inbuilt RTC
• GLP complaint.
• Entry of buffer value, machine ID
through keyboard for the GLP printout.
• 3 point automatic pH calibration with
buffer standards 4.0, 7.0 & 9.2 pH.
• 3 point manual pH calibration using with
known buffer standards.
• Automatic temperature compensation.
• Entry of temperature through keyboard
in the absence of temperature sensor.
• Storage upto 50 test results.
• Display of time based pH sampling data
upto 200 samples supply voltage : 90250V, 10% V AC, 50 Hz
• Operating temperature - 10-45 deg C.
• Humidity - 5-80% Rh
78
10
BIO-010
Triple distillation water
apparatus
11
12
BIO-011
BIO-012
Refrigerator
U.V. Spectrophotometer
• Automatic pH calibration : 3 points 4.0,
7.0 & 9.2 pH
• Manual pH calibration 3 points using
known buffers
• Display Backlite LCD
Triple Distillation plant (glass)
Pyrogen free distilled water. All glass water
distillation apparatus. It should comprise of a
flask having standard joint at the neck and the
heaters should be very carefully embedded in a
glass coil at the bottom of the flask. A cup
should be provided on the side of the flask for
the feeding water. A double walled condenser
with standard joint fits at the top of the flask.
All glass part must be made from high quality
borosilented glass. The apparatus must be fitted
on heavy cast iron stand having ring to hold the
flask, clamp to hold the condenser. The
distillation apparatus should have flask capacity
of 5 liter and three different stages.
Double door (185 lit.)
Technical specification :
1. Wavelength Rang : 190-900 nm.
2. Spectral band width : 0.2 nm-4.0, 0.1 nm
steps motor driven uv-vis. limiting resolution =
0.189 nm.
3. Wavelength accuracy : 0.02 nm at 656.1 nm
& 0.04 at 485.0 nm
4. Wavelength reproducibility : 0.008 nm.
5. Data interval : 0.02-1.67 nm, 5.541-20.6 cm-1,
0.2-16.7A
79
6. Photometric Range : 2.00 ABS or more.
7. Photometric accuracy : 0.00016 (at 0.3 at Abs
double aperture methods)
8. Baseline flatness 0.00022 ABS (200-850 nm)
9. Photometric noise 0.000030 at ABS 0.00014
at 3 Abs 1.5 Abs RBA
10. Photometric stability 0.0003ABS/hr (2 hr.
warm up)
11. Light source dead UV lamp & Tungsten
halogen visible source.
12. Monochromation czemy turner 0.28 double
beam
13. Deteftor photomultiplier tube.
14. Grating : High throughout optical system
with all reflective optical design 30 x 35 mm,
1200 lines blaze angle 8.6 at 240 nm,
15. Power requirement 220/240 volts 50/60 Hz.
16. Curve 2 sets pairs for BV and visible range.
DEPARTMENT OF FORENSIC MEDICINE
80
S.No.
01
02
Item Code No.
F.M-01
FM 02
Name of Equipment
Cold storage
Research Bnocular
microscopes
Specification
The chamber for four Dead bodies.
Temperature between (4 to 6c)
Insulation poly urethane foam.
Roof top refrigeration unit with air cool
condenser.
Electric supply 230+10 V-50 Hz
A vapour proof incadescent lamp.
Digital type temperature indicator cum
controller.
Rust Proof Body.
Door stainless steel.
Stainless steel tray in single pieces two and four
respectively for both unit edge and handles.
The assembly should have three pieces carriage
assembly which includes frame and lower and
upper carriage and should ride on wheels.
Minimum 20 installations in India and 3 in
Bhopal and should have 20 in this field.
Company should have service centre in Bhopal.
Three years warranty and after warranty two
years free service contract.
• Colour corrected Infinity Optical System,
Anti-fungus.
• Microscope Stand with coaxial fine and
coarse focussing mechanism.
• Coarse motion Torque adjustable, Upper
stage drive stop incorporated.
• Trinocular Eyepiece Tube, Siedintorp
design, 300 inclined with
• Built in 3 megapixal microscopic Digital
81
Comp./Divt.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
82
Camera.
USB 2.0 PC connection.
Live Image resolution : 3.0 mega pixels
(2048x1536 pixels)
Calibration slide.
Eyepiece High Eye point 10x20 mm with
dioptre adjustment.
On both eyepieces & rubber eyecups
(pair)
Reversed quintuple nosepiece.
EF-N Plan Achromat Objective 4x0.10
EF-N Plan Achromat Objective 10x0.25
EF-N Plan Achromat Objective 40x0.65,
Spring loaded
EF-N Plan Achromat Objective
100x1.25, spring loaded, oil
Rectangular Mechanical Stage - 175x140
mm
Cross travel range of 76x50 mm in x & y
direction.
With vernier scale, hard coated, right
hand control.
Abbe condender, N.A 1.25 with iris
diaphragm.
Built in Koehler illumination with
6V/30W Halogen Lamp and intense.
Vinyl Dust Cover, Immersion oil (5 ml)
Images plus software
Instant image capturing, real time full
screen image
Programmed interval captures, Video
capture by time settings
03
FM-03
Autopsy table
• Easy measurement calibration,
Measurement in microns, inches mill
• Length measurements, Ellipse rectangle,
Irregular shape measurement
• Perimeter, radius, Circumference
Measurements, Angle measurement
• Magnifier (zoom) function, Online files
sending / receiving, Sound
• Automatic image amalgamation, Image
adjustment effects counting.
• Data export, Report generating and print
out, interactive file format.
• Compatible computer, Photo quality
printer and UPS for use Microscope.
1. Table Top
- Stainless steel, Type 304, Satin Finish /
Stainless steel
- Should have dissecting area and sink.
2. Dissecting Area
- should have grid plates.
3. Sink
- Plumbing should be factory finished.
- should have hydro aspirator with reverse flow
features, control valve and vacuum breaker.
- should have hot / cold water fixtures with wrist
blade handles and goosneck faucets
- Should have sink rinse with hose fittings and
hose hanger.
4. Table Pedestal
- Stainless steel, Type 304, Satin finish
- Pedestal type
5. Ventilation
83
04
FM 04
LED TV
- down draft ventilation system
6. Electrical Receptacles
- GFCl type 220-240 volts AC 50 Hz
7. Disposer unit
- should have soulnoid valve, vacuum breaker
with off/on switch control and internal overload
protector.
8. Dimensions
- length 250-260 cm
- width 75-80 cm
- height - 90-100 cm
9. Polyurethane head rest - must be able to support neck while dissection
10 Stainless steel centimeter scale - Must be
engraved type
11. Scale support socket - must be able to hold
the scale support bar steadily.
12. Scale support bar - must be able to hold the
dial type weighing scale.
13. Weighing scale - dial type - must measure
upto 5 kg.
14. Polyurethane dissecting board - 2 feet x
11/2 feet x 1/4 inch.
grained trace, white
LED TV
• Remote system
• Flat panel
• Wall mountable
• Screen size 46 inch
• Dolby digital sound
• Internet TV option
• Ethernet connection
84
• USB Tv option
• Wifi adaptor support optional
• DVl & HDMl input
05
FM-05
Digital Camera
Digital SLR Cameras
Type - Single lens reflex digital camera with
interchangeable lenses.
Effective pixels - 6 million (app)
CCD-25x16 mm (App)
Picture Angle equivalent in 35 MM format (App
1.5 times
Lens focal length)
View finder - Fixed eye-level mirror type
Diopter adjustment - 1.6 - +0.5 m
Eye point - 18-20 mm
Frame coverage - >90% of lens (horizontal to
vertical)
Magnification -0.75
Lens aperture - instant return with preview.
Lens Servo - Auto and manual focus
Exposure metring - Three mode through the lens
exposure metering.
Matrix - 3D color matrix metering
Range - 0.2EV (3D color matrix)
Center weighed - 75% in center of frame
Shutter - Mechanical and CCD electronic.
Sensitivity - 200-1600 (ISO equivalent)
Self timer - Electronically controlled timer with
2-20s duration
Card - 1 GB
Video output - Selective
Weight - App -500-600 GMS
Power sources - Rechargeable battery with
85
06
FM-06
07
FM-07
08
FM-08
charger 7.4 VDC
with separate adapter
Dimension - 6"x4.5"x3" (App)
Tripod socket - 0.25" (ISO)
Monitor - 2.0" Polysilicon TFT LCD with
brightness
Adjustment
Flash - SB800DX
Zoom lens - 17-80
OPETATING ENVIORNMENT - ROOM
TEMPERATURE IN ALL SEASONS
CD/DVD Player
5.1 Ch. Digital out DIVX, progressive scan,
multi format playability, remote with battery
5.1 Surround speakers
Weighing machine for human Made up of premium quality materials
dead bodies
- Provide accurate weight information.
- Complete SS platform for easy cleaning and
anti staining.
- Platform size 2100 mm x 600 mm approx.
- To weigh a maximum of 200 kg. accuracy 20
gms.
- TARE function provided.
- Imported load cells for enduring performance.
- Digital display
- Imported load cells for enduring performance.
- Provide hygienic and efficient weighing.
- Stainless steel 304 grade construction.
- Available in varied specifications.
- Rechargeable battery back up pack provided
for usage in power failure.
Anthropological instrument
seat
Anthrop meter type
86
Anthropometer made
of aluminium, GPM
measurement of
length. Range 0.2.100 mm
sliding caliper with
250/0-140 mm
vernier (1/10 mm)
aluminium
Condyle caliper
Co-ordinate calliper
made of
Spreading calliper
with
Spreading caliper
with rounded ends
Harpenden skin fold
Caliper
Orbitometer
Goniometer
Mandibulometer
Baby weighing
87
for location of all
height measure whole
body.
sliding caliper with
vernier range 0minimum calibration
1/10 mm made of
Condyle caliper
Range - 0-140 mm
nickel plated.
Co-ordinate calliper
range 20-200 mm
aluminium
Sliding calliper with
pointed ends
Range 0-600 mm,
made of brass
Sliding caliper with
rounded ends range 0600 mm made of
brass.
Harpendens skin fold
calliper.
Range of upto 80 mm.
Orbitometer
Made - aluminium
Goniometer (molisons
type)
Range 0 - 180 degree
Mandibulometer
made of metal
Range - 0
Baby weighing scale
09
FM-09
Interactive teaching board
with LCD Projector
digital
Range upto 150 kg
Minimum calibration
100 grams
Digital professional
Digital professional
scale 150 kg
scale range upto
Minimum calibration
100 gms.
Stadio meter
Stadiometeric
telescopic
telescope
Range 10-70"
Minimum 1/8"
Infant head measuring Infant head measuring
type
Range 6-22"
minimum 1mm.
baby infantometer
upto 3'
Made upto P.V.C.
Interactive teaching board - 64 inches screen,
Electromagnetic technology
Wireless electromagnetic sensitive pen touch
system
Aspect ratio 4:3
Resolution - 13850*9760 pixels
Cursor speed - 120 dots / sec
Operation system - windows 2000/XP/Vista/7
Accessories - wireless pen, wall mounting parts,
USB extended cables, stand eraser
LCD Projector - LUN no SME1123366
88
DEPARTMENT SURGERY
S.No.
1
Item Code No.
Name of Equipment
sur.-001
Upper and lower urinary tract
endoscopy set with visual
optical urotome with camera
and endovision with flexible
endoscope, lithoclast & laser.
Specification
TECHNICAL SPECIFICATIONS OF CYSTOURETHROSCOPE, OPTICAL URETHROTOME,
RESECTOSCOPE, COLD LIGHT FOUNTAIN, CAMERA,
LIGHT SOURCE, MONITOR ETC.
It should have a telescope , new generation 0 degree angle of
view with 4mm diameter, autoclavable. 1 No
.It should have a Cysto-Urethroscope Sheath 19.5Fr. with
obturator.
-1 No.
It should have a Cysto-Urethroscope Sheath 25Fr. with
obturator.
-1 No.
It should have an adaptor with single/double instrument
Port for Cystoscopy.
-1 No.
It should have Stone Crushing forceps for smaller stones
and for removing Stone fragments -1 No.
It should have a telescope new generation 30 degree
angle of view with fixed eyepiece, 4mm diameter ,
autoclavable.
-2 Nos.
It should have a Continous Irrigation Resectoscope outer
Sheath 26Fr. with automatic locking mechanism, oblique
distal tip.
--1 No.
It should have a Continous Irrigation Resectoscope Inner
Sheath 24Fr. with automatic locking mechanism,.
Rotatable irrigation ring, oblique distal tip with ceramic
89
Comp./Di
vt.
insulation
--
1 No
It should have a Visual Obturator of 24Fr. --- 1 No.
It should have a working element with passive Cutting
Action.
--- 2 Nos.
It should have Cutting Loops to cut the adenomas
-- 100 Nos.
It should have Coagulating Electrodes
-- 10 Nos.
It should have Hook Electrode
-- 10 Nos.
It should have H.F.Connecting Cable 3m long -- 2 Nos.
Toomey syringe 100 ml
It should have Elik Evacuator with adaptor.
-- 2 Nos
--2 Nos.
It should have an Optical Urethrotome Sheath of 20.5Fr.
with instrument Port.
---1 No.
It should have a Hollow Obturator.
---1 No.
It should have working insert for stricture scalpel
--2Nos.
It should have a Guide tube with lateral opening.--1 No.
90
It should have Stricture Scalpel for Optical Urethrotome,
Sache’s blade.(standard)
--- 20 Nos
It should have Stricture Scalpel for Optical Urethrotome,
lancet blade.
-- 20 Nos.
should have an OTIS Urethrotome with three
interchangeable knives, straight, angled and Spherical.
-- 1 No.
It should have working element for Punch lithotripsy for
sheaths 24 to 28 Fr. and continois irrigation double
sheaths 27 and 28.9fr., as well as telescopes 0- 30
degree
-- 1 No
Should have of Flexible Button Electrode,unipolar 5mm
diameter with working length 400mm.
---2 Nos.
Should have a Rigid Optical Foreign Body Forceps to be
used with 19.5Fr.Sheath onwards
-- 1 No
Should have a Rigid Optical Coagulating Biopsy Forceps
to be used with 19.5Fr. Sheath onwards
-- 1 No
Should have a Rigid Optical Biopsy Forceps , retrograde
to be used with 9.5Fr.Sheath onwards
-- 1 No
Should have a Rigid Optical Stone Forceps to be used
with 23Fr. Sheath onwards
-- 1 No
TECHNICAL SPECIFICATIONS OF UPPER TRACT
91
UROLOGY INSTRUMENTS
NEPHROSCOPE 27 FR.
SHOULD HAVE PANOVIEW OPERATING TELESCOPE
PARALLEL WITH BUILT IN OVAL PROBE CHANNEL FOR 4
MM ACCESSORY INSTRUMENTS WITH 25 DEGREE ANGLE
OF VIEW. IT SHOULD ALSO BE CAPABLE OF USING FOR
IRRIGATION OR ASPIRATION.
SHOULD HAVE OPERATING SHEATH OF 27 FR. WITH
IRRIGATION OUTLETS AT THE DISTAL END INCLUDING
HOLLOW OBTURATOR FOR USE OVER J- GUIDE WIRE
WITH ROTATABLE IRRIGATION TAP.
SHOULD HAVE TELESCOPIC DILATOR 9-27 FR. THAT CAN
BE USED OVER A J-GUIDE WIRE CONSISTING OF ONE
HOLLOW GUIDE ROD.
SHOULD HAVE A 30FR. AMPLATZ DIALTOR.
SHOULD HAVE STONE GRASPING FORCEPS RIGID WITH
ALLIGATOR JAWS 3 NOS.
SHOULD HAVE STONE GRASPING FORCEPS RIGID FOR
SOFT STONES 3 NOS.
SHOULD HAVE THREE PRONGED STONE GRASPER RIGID
SELF CLOSING 3NOS.
NEPHROSCOPE 20.8 FR.
SHOULD HAVE PANOVIEW PLUS OPERATING TELESCOPE WITH
OFFSET EYEPIECE ,12 DEG.14FR. CHANNEL AUTOMATIC VALVE
WITH SEALING MEMBRANE AND SEALING CAP, BLUE
92
SHOULD HAVE OPERATING
SHEATH 20.8 FR., ROUND WITH
SWIEVEL IRRIGATION CONNECTOR,DISTAL TIP STRAIGHT
AUTOMATIC LOCKING MECHANISM
SHOULD HAVE HOLLOW OBTURATOR FOR OPERATING
SHEATH
SHOULD HAVE STONE GRASPING FORCEPS DIA 3..5 MM
WORKING LENGTH 350 MM
SHOULD HAVE THREE PRONGED STONE GRASPER DIA 3.5
MM WORKING LENGTH 350 MM
SHOULD HAVE RIGID GRASPING FORCEPS FINELY
TOOTHED FOR SOFT STONES.
E-LINE COMPACT OPERATING URETERORENOSCOPE 6/7.5 FR.
THE URETERORENOSCOPE SHOULD BE COMPACT SLENDER
DESIGN AND MADE OF HIGHEST QUALITY LIGHT MATERIAL
THE SHEATH SHOULD HAVE A PROFILE DISTAL TIP
ABSOLUTELY ATRAMATIC HEAD SHAPE.
THE URETERONOSCOPE SHOULD BE MORE SLENDER,
STEPLESS AND SHOULD HAVE TIP SIZE 6/7.5 FR.
THE UETERORENOSCOPE SHOULD HAVE LATERALLY
OFFSET EYEPIECE.
THE URETERORENOSCOPE SHOULD HAVE A BUILT IN
INSTRUMENT BRIDGE HAVING TWO INSTRUMENTS PORT
93
ONE FOR INTRODUCING RIGID LITHOTRIPSY PROBE AND
SECOND FOR AUXILIARY INSTRUMENTS.
THE CENTRAL CHANNEL SHOULD HAVE A SILICON SEALING
VALVE TO AVOID BACK FIRING OF IRRIGATION FLUID.
THE URETERORENOSCOPE SHOULD HAVE AN EXCELLENT
OPTICAL SYSTEM WITH HIGH RESOLUTION IMAGE
BUNDLES UP TO 50,000 PIXELS FOR LARGER AND
BRIGHTER IMAGE WITH OPTIMUM DEPTH OF FOCUS.
IT SHOULD HAVE A WORKING LENGTH OF 430 MM
IT SHOULD HAVE 3 NOS GRASPING FORCEPS 4FR. WITH
LARGE SERRATED JAWS WITH SPRING ACTION
IT SHOULD HAVE PLASTIC HANDLE FOR EASILY HANDLING
OF URETERORENOSCOPE DURING PROCEDURES.
IT SHOULD HAVE GUIDE FOR LITHOCLAST HANDLE.
URETERO-RENOSCOPE SHORT 4.5FR.
IT SHOULD HAVE A LATERAL EYEPIECE
IT SHOULD BE PARTICULARLY SUITABLE FOR PRIMARY URS
WITHOUT PRIOR PLACEMENT OF A DOUBLE J CATHETER
IT SHOULD HAVE A STRAIGHT INSTRUMENT CHANNEL
IT SHOULD BE ABLE TO BE USED WITH LASER FIBER DIA
230 , LITHOCLAST PROBE 0.8 MM OR ELECTRO HYDRAULIC
LITHOTRIPSY PROBE 2.4 FR.
IT SHOULD HAVE EXCELLENT VIEW AND OPTIMUM
IRRIGATION FLOW
94
IT SHOULD HAVE OVAL IRRIGATION AND INSTRUMENT
CHANNEL INCLUDING AUTOMATIC VALVE FOR INSERTING
INSTRUMENTS.
IT SHOULD HAVE A WORKING LENGTH O0F 430 MM, 5
DEGREE OPTICS
IT SHOULD HAVE A TIP DIAMETER OF 4.5 FR.
IT SHOULD HAVE 1 X 3 FR. CHANNEL FOR AUXLILLARY
INSTRUMENTS
TECHNICAL SPECIFICATIONS OF 3 CHIP CAMERA
3 Chip High definition Camera Controller Unit with
Digital Signal Processing, resolution
1920 x 1080 pixel, Digital Zoom on Screen display with
BNC, S- Video , RBG cale with
remote. Power supply 240 V , 50 Hz
3 Chip Autoclavable Camera Head integrated Lens
focal length 18 mm, programmable
Camera head with buttons for white balance and color
contrast power cable
1 Set
LCD HIGH DEFINITION MONITOR
The Medical Grade Monitor should have :
-
High Class Full LCD panel 24” diagonal
-
High Definition Monitor to be used for Video
LCD.
Resolution of 1920 x 1200 pixel
Aspect Ratio of 16:10
DVI-D/HD-SDI/BNC/S-video inputs and outputs
VGA input for PC.
Excellent angle of view, contrast, brightness
and color depth.
-
95
-
Simultaneous display of two images picture-in
picture
Monitor Stand for Safe mounting.
Mains supply 240 V, 50 Hz
Should confirm to the international standards.
It should have Monitor Stand for above
Monitor
Xenon Light Source 300watts
Xenon light source 300Watts for high light intensity with
accurate focusing arrangements. It
should have a relatable fiber light cable connector to directly
connect the light cables of
different makes without using any adoptors.
It should have
an easy system to replace the
lamp. It should have a colour temperature of 5600K. It
should have different selection modes for automatic video
spot video and integral video.
--
1 No
Should have Spare Lamp for the above 300 Watts Light
source
-- -1 No
Fibre light cable 2300 MM length with 4.5 mm fibre bundle
diameter
-- 1 No.
Should have original Mobile Unit Trolley consisting of
96
Mobile Universal Video Trolley Including 4 Shelves, 3 of
which are fully height adjustable ntegrated Cable ducts, 4
Antisstatic Smooth- Running Double Casters, 2 of which can
be
looked Dimensions wxhxd. 673x1508x688 mm
Basic Electrics to connect Upto 12 Electrical Units,Mains
Voltage,230v, Consisting Of : 1
Housing, 1 Mains Module, 1 Unit Socket Outlet 1 Main Switch,
6 Unit Mains Cables.
Transformer Module Mains Voltage 230v, Isolating
Transformer, Technical Data: Max.2000va,
Max.9a,To Upgrade The Basic Electrics, Dimensions wxhxd
420x145x280. Weight Approx. 32
Drawer Unit For Mobile-Trolley, Wxhxd 540x 125x5
Camera Head Holder For 3D Endocamera
Holder For Light Cables with Connectors.
Infusion Bottle Holder Height Adjustable From 1.6 To 2.6m
To Support Side Mounting And
Clamp Included. Cover Assembly Onto The Trolley Consisting
Of: Lockable Tinted Safety Glass Doors and Lockable Rear
Panel Side Panels from the original manufactur
SPECIFICATION OF LITHOCLAST (Imported)
LITHOCLAST SET(pneumatic and ultrasonic energy source)
Should have Control Unit 100-240 VAC, 40 VA, 50/60 Hz
Should have Foot Pedal Electric foot pedal with two pedals
Should have compressed Air Tubing for Lithoclast hand piece
97
with device connector and one spare – Compressed Air tubing,
for Lithoclast hand piece without connector
Should have connectors for exhaust for Lithoclast
Main cord should be with European Connector
ACCESSORIES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
98
Should be with Lithoclast probes of 0.8mm in diameter,
605mm in length
Should be with Lithoclast probes of 0.8mm in diameter,
445mm in length
Should be with Lithoclast probes of 1.0mm in diameter,
605mm in length
Should be with Lithoclast probes of 1.0mm in diameter,
445mm in length
Should be with Lithoclast probes of 1.6mm in diameter,
605mm in length
Should be with Lithoclast probes of 1.6mm in diameter,
445mm in length
Should be with Lithoclast probes of 2.0mm in diameter,
425mm in length
Should be with Lithoclast probe of 3.2mm in diameter (9.6
Fr.), 425mm in length for bladder and kidney stones.
Should be with probe cap for connection of 3.2mm probe
on Lithoclast hand piece
Should have Lithovac-basic element for suction,
stabilization, fragmentation and aspiration of stones
Should have Lithovac-basic element silicon tube for
Lithovac tube valve with suction connection
Should be with Suction Tube of 1.6mm in diameter (4.8
Charr.), 595mm in length for Lithovac for use in Uretero
Reno scopes with working channels 5 Fr
Should be with Lithoclast probe of 0.8mm in diameter for
Lithovac probe 4.8 Fr. in length.
Should have suction tube for Lithovac 3.5mm in diameter
(10.5 Fr.), 380mm in length for use in Cystoscope and
Nephroscope with working channel 10.5Fr
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Should be with Lithoclast probe of 1.6mm in diameter for
Lithovac probe 10.5 Fr., for bladder stone lithotripsy
Should have suction tube for Lithovac 4.0mm in diameter
(12 Fr.), 353mm in length for use in Nephroscope with
working channel 12Fr
Should have Lithoclast Hand piece consisting of: Lithoclast
Hand piece pn3
Should be with adjustment interface
Should have probe cap for connection of diameter 0.82.0mm probes on Lithoclast hand piece
Should have compressed Air Tubing for Lithoclast hand
piece with device connector
Should be probe guides (12pieces)
Should be with silicone seals for single use (20 pieces)
Should be with transportation case for Lithoclast hand
piece
Should be with Air Compressor to supply the LITHOCLAST,
230 V, 50/60 Hz, dimensions (W x H x D):380 x 305 x 315
mm
Air Compressor should be of 4 liter, 110V with 8 bar
Medical Quality
Should be with compressed air tube for air compressor,
1.0m in length
Should be with compressed air tube for air compressor,
3.0m in length
Should be with compressed air tube for central
compressed air supply for France
Should be with compressed air tube for central
compressed air supply for Drager
Should have stone catcher set with 2 sterile suction tubes
3m in length, sterile individually packed set of 10.
Should have Stone catcher holder
Should have handle guide for Lithoclast handle for URS
Should have Fuses for Lithoclast
TECHNICAL SPECIFICATION OF HOLMIUM LASERS 20
WATTS :
•
It should be able to fragment calculi of any size in the bladder ,
99
ureter or kidney and any impacted stone fragment .
•
It should be able to ablate superficial bladder tumors, urethral
& ureteral tumors.
•
It should be able to treat invasive bladder carcinoma &
condylomas and lsions of the external genitalia.
•
It should have power output of 20 watts.
•
It should have repetition rate of 5-50Hz.
•
It should have Energy per Pulse of 0.2 - 3.5 Joules.
•
It should have pulse duration upto 600 microseconds.
•
It should have Red aiming beam of 2.5mw at 650nm, 3
intensity settings.
•
It should have a Touch Screen Colour Display and
should
rotate 360 Degrees.
•
It should have
a closed loop, self contained water to air
exchanger cooling system.
•
It should be useable with single phase 230V AC 50/60Hz,
30Amp's Power Supply
•
It should be supplied with following accessories:
•
•
•
•
•
•
•
•
•
•
•
•
100
550
365
200
550
550
365
200
Micron Reusable, Flexible Fiber
-Micron Reusable, Flexible Fiber
-micron Reusable, Flexible Fiber
-Micron Side Fire Fiber for Ablation -Micron Stripping and cleaving (set) -Micron Stripping and cleaving (set) -Micron Stripping and cleaving (set) --
Fibre Inspection Scope
Ceramic Scissors
Accessories Bag
Laser Safety Goggles
Laser Safety Glasses
------
1
1
1
1
1
1
1
1
1
1
3
3
Other Pre-requisites for 20w laser
a.
b.
c.
d.
e.
f.
g.
h.
There should be a number of installations in India being
used for more than three years.
The principals should be present directly in India.
The principal company should have direct Service
Engineers. All the Service Contracts to be managed by
them directly and sufficient spares inventory should be
available
The company should provide support which helps the
center gain visibility and provide customized support (
Sponsored Workshop, Patient Education Brochures,
Developing the hospital as a Training Center etc.)
Should be able to do Entire extraction of any size of
prostate and lithotripsy- both in one machine with Less
Post Operative Complications
The unit should be Economically viable to the Center and
the Patient- Reusable fibers , should have their own
Morcellator.
Advance machine software which enables user to choose
numerous power settings for cutting and coagulating
both, simultaneously should be available.
All the essential equipment and accessories required with
the machine like Morcellator (for removing enucleated
Prostate), fibers etc are directly manufactured by the
principals
Applications :
Urology
Bladder neck incision (BNI)
Transurethral
incision
of
prostate (TUIP)
Lithotripsy of renal, ureteral
and bladder calculi
101
Ureteral
and
Urethral
strictures
Bladder and ureteral tumors
Orthopedics
Meniscectomy in the knee
Osteoarthritis lesions
Arthroscopy
Spinal Dissectomy
Gastroenterology
Gall bladder and bile duct
stones
Polypectomy
ENT
Sinus Surgery
Tonsillectomy
Partial turbectomy
Polypectomy
Gynecology
Benign endometrial polyps
Endometriosis
Peritoneal adhesions
Submucous fibroids
Paediatric Surgery
102
Posterior
Urethral
valve
flungsation
2
sur.-002
Impedance based bipolar
RFA for endoluminal
ablation. With accessories
and disposables.
Urinary stones & strictures
Haemangiomas
General
• Should be based on the principle of Radio
frequency induced Thermotherapy for
endovenous
treatment
of
venous
insufficiency.
• Current should be induced through bipolar
applicators. Should not need any neutral
electrodes.
• Should be intersitial form of therapy which
can be performed under local anaesthesia.
• Tissue should be heated between 60 degree C
to 100 degree C using Catheter like
monitored and indicated by an acoustic
signal.
• The power output of the RF generator should
automatically correspond to the tissue
resistance and ensure that the radio
frequency is emitted as the proper rate so that
thermal injuries or burns are avoided.
• Should have footswitch control.
Should be a compact unit and should be supplied
with 25 units of single use applicators.
Power Unit
Output power : 1-25 Watts
Frequency - 470kHz
Channels : 1 Bipolar
Applicator - 2 boxes of 5 pcs
103
• Should be flexible and ultrathin (1.8mm
diameter)
• The tip should be hemispherical to avoid
intravenous injuries.
• The length should be 1200 mm.
• The electrode length should be 15 mm.
Should have 3 m long cable in each applicator.
104
DEPARTMENT OF PEAD. MEDICINE
S.No.
1
2
Item Code No.
pd.-001
pd.-002
Name of Equipment
Resuscitation Trolley
Portable ECG Machine
3
pd.-003
Flux meter
4
pd.-004
Double surface phototherapy
unit & single surface
phototherapy units
5
pd.-005
Resuscitation kit
6
7
8
pd.-006
pd.-007
pd.-008
Suction machine portable
Nebulizers multiport
Electronic weighing scale
Specification
To hold all resuscitation equipment & medicine
12 lead ECG machine with neonatal & pediatric
probes
Required for cardiac patients
Flex meter with a well designed filter which
should have a transmission area of 425-475 nm
spectrum range To timely mentioned the
irradiance output of phototherapy unit
Combination of special blue & white fluorescent
light delivering irradiance of 12-16 UW/cm2/nm
For neonates with hyperbilirubinemia to reduce
serum conc. of bilirubin & the risk of bilirubin
toxicity
Ambu bags (250 & 500 ml capacity) with mask
of different sizes and laryngoscopes with blades
00, 0, 1
For proper sanctioning i
Multiport For Nebulization
For Anthropometric measurements
105
Comp./Divt.
DEPARTMENT OF ANAESTHESIOLOGY
S.No.
01.
Item
Name of Equipment
Code No.
ANS-001 Oxygen concentrator with
Specification
double outlet
Size:
:
Weight
:
Sound level
compact and portable
upto 25 kgs
:
< 50 dBA
Power Consumption
:
400 watts avg
Safety alarms
:
Power failure
Process Failure
High and Low pressure
Low oxygen purity
Oxygen purity
:
0-2 LPM-94%, 2-4 LPM-93%, 5 LPM- 90%
Outlet Pressure
:
7 psi
Oxygen Output
:
Variable – 0 to 5 LPM (1/2 Litre increment)
Filters
:
Cabinet, Compressor intake, and Bacteria
Warranty
:
upto 1 year
106
Comp
02.
ANS-002
Modular
Prefabricated
Operation
Theaters
OBJECTIVES
The Main Objectives :
To dilute the bacteria generated by the patient and operating staff in the OT.
To prevent less clean air from neighboring rooms entering the OT.
Ensure maximum standard of safety.
Allow flexibility.
Minimizes maintenance.
Ensure functional separation of spaces.
Regulates flow of traffic
Reduce Noscominal Infections
Hygienic atmosphere
Homogenous unidirectional laminar air ceiling system
The entire work should be executed by one company only.
Scope of work:
1) Stainless Steel sheet wall panels
2) Stainless Steel Ceilings Panels inside OT
3) Antibacterial Paint inside OT
4) Double Dome LED OT Light inside OT
5) Air Ceiling Management System inside OT
6) Homogenous Low Turbulence Unidirectional Laminar Air Flow Ceiling
7) X-Ray View Screen, Writing Board, PRD
8) Surgeon Control Panel
9) Electrical wiring and fixtures inside OT
10) Hermetically Sealed Sliding Automatic Door
11) Antistatic Conductive Tile Flooring inside OT
12) Extension of Medical Gas Pipe Line System
13) AGSS system
14) Suction and Oxygen Therapy System
15) Scrub Sink to be fitted outside OT
107
Technical Specifications
Sr. No. Description
1.
Qty
Indigenous Stainless Steel Prefabricated Walls & Ceilings
120 sq mtr for
The pre-fabricated stainless steel sheet (1.6 mm thick) walls & ceiling panels
backed by 9/12mm thk gypsum board to provide the seamless operating room.
The external walls of the room is constructed with solid brick and mortar and is
in the scope of the hospital. The inner surface walls should be constructed with
at least 1.60mm thick stainless steel sheets backed by 9/12-mm gypsum board.
The inner surface walls should be fixed to the brick wall with essential supports.
There should be minimum possible cavity/gap in between the solid and steel
walls. The total distance between the inside and outside surfaces of the
operating room should be variable to suit the architects’ layout, but should be
sufficient for the flush mounting of equipments. The individual wall panels
should be spot welded together at equal intervals to render equal support to
the panels. Spot welding should be properly grinded to make the surface
levelled. All joints should be filled with metal filler and sanded flush on site,
ready to receive the plastic finish. The cavity between the inner and outer walls
should be left with minimum obstructions for the possible addition of
equipment at a latter date and to enable services, pipes, conduits etc, to be run
within the cavity. All wall-mounted equipment should be flush mounted and
sealed into theatre. The wall panel design and construction should allow for the
installation and support of all equipment and the provision of openings
required for the installations, without affecting rigidity and strength. Access
boxes should be fitted to the rear of all wall-mounted equipment to enable
maintenance to be carried out from outside the operating room. All the sharp
edges and corners should be smoothened to avoid bacteria contamination.
1 OT
108
2.
3.
Imported Antibacterial / Antifungal Paint
120 sq mtr for
Anti-Microbial Protection: These product hygiene coatings start the biocidal
action as soon as the microorganism land on the surface, and prevents the
growth of mould, bacteria and yeasts for at least 10 year. This Hygiene coating
are independently tested by leading universities to demonstrate resistance to a
wide range of mixed species, including stubborn pathogens such as MRSA
(Methicillin Resistance Staphylococcus Aureus). Other pathogens that can be
present in hospital environment and to which resistance is confirmed are:
Acinetobacter sp, Aerobacter aerogenes, Bacillus subtilies (and other Bacillus
sp) Escherichia coli, Listeria monocytogenes, Pseudomonas aeruginosa,
Pseudomonas putida, Salmonella typimurium, Serratia marcescens,
Staphylococcus Aureus. Lily Cycle Savings : The unparalleled durability of our
hygiene coatings helps to extend the maintenance cycle and to minimize all
related material, labour and shut down costs. The speed with which they can be
installed and the ease of subsequent maintenance also create significant cost
savings.Chemical Pesistance : These hygiene coatings should be highly resistant
to abrasives, detergents and weak acids and alkalis used in cleaning regimes.
Further more, they can be regularly steam cleaned without any loss of
performance or adhesion to the substrate.
1 OT
Imported Conductive Tile Flooring : ESD-Control tile Flooring
50 sq mtr for
Flooring : Providing & fixing 2mm thick Conductive flooring with carbon backing
total thickness 2.00mm, total weight 3.000 g/m2 polyurethane reinforced
,scratch resistant, fire resistant, chemical resistant , slip resistant, anti fungi &
bacterial growth , dimensional stability ≤0.40%, static electrical charger < 2Kv ,
impact sound reduction approx +4bd, electrical resistant. Installation : The
flooring would be installed on a smooth, clean sub floor which should be free
1 OT
109
from any undulation .A copper strip/mesh should be layer under the tiles, with
one earthing point for every 150 sft of area and good quality water based
adhesive zfor fixing as per as manufacturers recommendation. Thermal Welding
: The joints must be welds by the heat fusion process to get a seamless floor.
The joints in the flooring should be sealed by using a PVC welding bar of
matching colour to be supplied by the manufacturer, using a hot air gun for
fusion of welding bar with flooring.
4.
Indigenous MS Steel Grill for corners inside the OT : All the four corners should
have return air duct outlets and also the grill of which should be made of duly
powder coated MS steel.
1nos for 1 OT
5.
Imported Air Ceiling Management System (complete) : 1set for each OT
1set for 1 OT
Consist of the following for each OT:
Imported 1no. of Media Bridge 3x3size for each OT
Imported 8nos. Peripherial light cum luminaries to fitted inside the frame for
each OT
Imported 4nos. Clean Room Luminaries with RG with frame for each OT
All items of air ceiling system like Media Bridge, Peripehrial Light and Cleanroom luminaries and RGB luminaries should be from one single make, single
origin and single standard and will only be accepted.
Imported Ceiling suspended horizontal medical supply unit media bridge= 1no.
for each OT : The aluminum-extruded profile should have an integrated double
110
support rail at the bottom. Facilities for lighting, mains, extra low voltage, data
and medical gases are ready for connection at central incoming point on the
horizontal profile. These facilities must be arranged in type, quantity and
position according to customer’s request. Connection of medical gases and
electrical components to the hospital system is provided through the vertical
aluminum suspension profiles.
The system should be arranged in a square shape having size of 3mtr x 3mtr
square.
It should have the following :8 x vertical suspensions inclusive heavy ceiling flanges and false ceiling covers,
4 x profile corners 90°, revolving.,
8 x side lights,
1 x 12m additionally medical rail of 25x10mm at the inside of the system,
20nos. Electrical multipin switch + socket of Indian Origin 6/16amp with plate. ,
2nos. Data socket RJ45 cat 6, wiring to be executed at site.,
20 x Potential Earthing Equalization sockets with inside wiring.
2 x Equipment trolleys, large (690 mm wide) with 2 shelves.
It should be supplied with two trolley carrier, wide execution including
crosshead tie bar, for carrying monitoring and respiration apparatus, travelling
crab with bearings, turnable by +/- 45°, 2 nos. stainless steel support tubes
diameter 38 mm, 1530 mm length, 690 mm width, loading capacity 150kg. It
should also have utilisable area 640x340mm coated in grey-white RAL 9002
with lateral supporting rails 25x10mm for mounting 2tubes 38mm with module
111
690mm weight 6.3kg and load carrying supporting base capacity 40Kg.
12nos Medical Gas Outlets Points for each OT : It should fully meets and
complies with HTM 2022, HTM 02-01, C11 standards and should be duly CE
marked. It should have Integral check valve Integral check valve – allows
removal of the housing and socket assemblies for maintenance without closing
down the entire pipeline and each outlet should be individually tested. It
should be hundred metal construction. Full metal to metal seal on maintenance
check valve ensures no degradation over time. It should be of all hundred
percent metal and must incorporate a sheerplance that ensures a fail – safe
condition after accidental damage or bed jacking (causing no damage to first fix
and enabling easy replacement without isolation). Construction of the terminal
unit should be of machined brass and die – cast chrome collar with stainless
steel rolling pins. Each of the gas specific components must have the gas service
engraved onto it, to ensure safety and compliance with standard.. The box
should be supplied with a flush mounting bezel as a plaster finish. Should have
safety features like positive action of rolling pin latch mechanism which hold
the probe securely, anti rotational locking bar and the gas indexing pin are cast
into the socket assembly and cannot come loose or be removed and gas specific
indexed – eliminates the risk of connecting a socket assembly of one gas to the
terminal block of another, either during installation or maintenance.
Imported Peripherial Light cum luminaries with frame -8nos. (Imported) for
each OT: Luminaires with 3 T5 lamps 54 W. Framed luminaire cover made of
highly-resistant and desinfactant-consistant laminated safety glass, laserable,
semi-specular. With visual systems against glare of the lamps and of the
internal highly-specular reflectors, cumulative reflexion coated, singular
adjustable by up to +/- 30°. Luminaire body white, consists of sheet steel with
mechanical and electrical removable carrier equipment. Protection IP 65. With
112
dimmable electronic multi-lamp ballast with 1-10 V interface. Suitable for areas
with infrared regulation.
Imported Clean room luminaries with RGB with frame -4nos. (Imported) for
each OT: Luminaries for surface or recess mounting in operation theatres
should flush with the ceiling, for 2 or 3 T5 fluorescent lamps (49 or 54 W), Ø 16
mm. With highly-specular, anodised aluminium reflectors and optical anti-glare
system for individually adjustable light distribution. Luminaries cover made of
highly-resistant, disinfectant-proof laminated safety glass with stylish finegrained surface, glass pane with white coated steel frame. Closing devices are
integrated automatically in the electrical safety control without lines having to
be connected to the luminaire housing. Luminaire body made of sheet steel,
white, powder-coated, supplied ready for connection optionally for individual
or series circuit, with digital, electronic control gear in Multi-Lamp technology.
Mains supply and further wiring by means of Pg 16 screw glands. With four-pole
connection terminal and earth connection terminal for wires up to 2.5 mm² for
mains supply and further wiring. Luminaire with ENEC and F mark, degree of
protection IP 65, protection class I, 230 V, 50 Hz .Recess frames for the gas-tight
installation of clean-room luminaires in IP 65 in suspended ceilings. Frame
made of extruded aluminium profile, white, powder-coated, able to be put
together to form a rigid, continuous frame by means of plug and screw
connections, optionally in individual, continuous-line, rectangular or U-shaped
arrangements. Ledge for ceiling construction material as angular ledge for
covering the raw edge of the ceiling construction material.
Clean-Room Luminaries for RGB control: Easy slave 50064482(with dimmable
electronic control gear with dali Interface)
LM T 16-red 54W/60 G5 Osram 10019142
113
LM T 16-blue 54W/67 G5 Osram 10019143
LM T-16-blue 54W/67 G5 Osram 10019144
6.
Imported Homogenous Low Turbulance laminar air flow ceiling for each OT.
It should be Ultra Clean Ventilation System with Unidirectional Flow. It should
be draft-free, confortable room climate and minimal, undisruptive noise level. It
should have minimal pathogen concentration (, 10 CF U/m3) in the sterile field.
It should have highly economical energy consumption from a very low pressure
drop. It should be perfectly seamless integration of ceiling mounted equipment
and OT Ceiling. It should be flexible modular range of solutions, adjustable to
the local requirements .It should be made out of high quality and durable
materials, filter housings and pressure chamber are made out of high-end
stainless steel (quality : 1.4301). The frame for the CG-Diffuser and the
surrounding equipment are constructed from high quality, anodized aluminum
profiles.
The air velocity with 0.25 m/s and should have air volume (in flow) of 5440
m3/h. It should have aerosol port for pressure differences measurement. It
should have separate seal leak test ports for each minipleat Hepa- filter (in
conjunction with test groove). Laminar air flow should not be a grouping of
filter housings plus a perforated plate.
Filter technology : The filter and laminar air flow ceiling should be from same
manufactuere. It should have a low pressure drop allows for the long-term
usage of the HEPA Miniplet H13 filters. The filters must be need to be changed
after two /three years, providing a significant saving of the running cost of the
114
1nos for 1 OT
Laminar Flow Ceiling. It should have reliable filter efficiency our filters are
guaranteed to remove particles and gems with the usual H 13 filters retaining
99.95 % of the particles and germs. It should have minimal pressure drop a low
pressure drop ensures the energy saving characteristic of the Laminar Flow
Ceiling . The pressure drop of 93 mm H 13 filters should be only approx. 60 Pa.
at an airflow of 1000 m3/hm3. It should be mandatory to have test certificate
for the filters from the original mfr of filter and laminar air flow system. Filter
should be according to EN 10204 ("ULPACAT-Test"). It should be protected on
both sides against inadvertently touching the filters.
Unidirectional air flow : The high quality CG-Diffuser should secures the
unidirectional airflow according to EN ISO 14644. The double-layer textile
screen constructed from specialized material with more than 100 fibres/cm,
ensures an even diffusion of the air. This technology must avoids turbulences
which might otherwise draw germs from the non-sterile area into the operating
field and which low cost materials, one layer diffusers, or perforated plates can
not guarantee this. Powerful, low noise recirculation system : It should have low
noise recirculation systems guarantee compliance with noise levels of ≤ 45 to
48 dB(A) required by European standards. Minimizing the noise level should be
highly important for the OT team, which has to stay focused on the medical
procedure over many hours.
CG3 aluminum frame : It should be perfect integration in the operation theaters
and should be rigid frame system, made from anodized aluminum profile
enables the perfect integration of the OT Ceiling with the surrounding
installations. The OT lighting should be integrated into a frame system which
ensures its air sealed integration with the OT ceiling. The installation frame of
the lighting should no longer required. The frame system should allows the
seamless and air-sealed coverage of all gaps between the various installations
115
and for the direct connection to the remaining OT ceiling OT ceiling – a perectly
integrated solution for the OT.
Filter – and Diffuser – Frame : It should be made out of galvanized Aluminum
profile with integrated frames for the placement of the filter – cells, made out
of stainless steel (DIN 1.4301) and for the placement of the frame for the CGDiffuser. The Aluminum profile provides Aluminum rails for the easy and
seamless placement of the false sealing or other connecting equipment. The
Aluminum profile is prepared for the integration of the sterile field and O.R. –
illumination, when combined with the rail system for the O.R. illumination.
Sterile Air Diffuser CG : Transparent diffuser with double layer micro mesh,
made out of specialized textile. Assembly and disassembly without screws or
tools. Air- flow optimized frame made out of Aluminum profile. Pass through of
the stand of the O.R. light. Light bodies can be positioned directly in the frame.
7.
Imported Double Identical Dome Ceiling OT LED Light 160000Lux X 160000Lux
It should be twin dome and power LED which should provide direct, reflection
free illumination which allows to have double the efficiency compares to
conventional light source. It should be cool infrared-free light at the head are
of the surgeon for fatigue-free operating and prevents tissue from drying out in
the OT filed. It should have LFL lens combination and have the primary optics
which guides the light in a parallel, while secondary optics ensures beams of
coherent light. The results should be an excellent illumination in the OT field in
terms of area and depth. It should be flat, sealed light body specially designed
for laminar flow ceilings. It should have flow optimizes light head and reduced
116
1nos for 1 OT
surface temperature minimize turbulences in laminar air flow.
It should have individually adjustable color temperature in three stages from
3800 Kelvin, 4300Kelvin, 4800 Kelvin.
Color rendering index RA>95.
Light filed diameter :210-300mm
Depth of illumination: 800mm
Infra-red thermal radiation at 100000lux :325W/m2
Lamp service life >40000hours
Protection category of light head : IP54
Dimensions of 160000Lux light head : 800x720mm
It should have green light for endoscopic illumination
Temperature at light head surface <27.5C.
It should have camera preparation with cable and wiring for camera
The Led light should fulfills the requirement of the standard for turbulence-free
OT lights as per DIN 1946 Part-4 (2005). There should not be uplift since the
average degree of turbulence is below 26C.
8.
Indigenous Door and Frames : Hermetically Sealed Sliding Automatic Door
Size 1500mm x 2100mm with vision panels, 300mm X 300 mm. To maintain
sterility and the correct air pressure in the room, all doors into and out should
be of the sliding, hermetically sealing type. Track system and door blade guide
system : Track made of a patented anodized aluminum profile, size 90 x 110
117
1nos for 1 OT
mm. This rubber gasket is exchange-able. The door blade is 60 mm. thick and on
both sides flush finished with hygienic hard plastic laminate. The built up of the
door: Anodized aluminum surrounding, 4-sided, blind fixed. Door core made of
CFC-free Polyurethane or EPS, thickness 48 mm. As top layer on both sides is
hard plastic laminate of size 6mm. The total door blade thickness is 60 mm.,
flush on both sides. Frame profile : It should be sliding door , standard delivered
with an anodized aluminum angle profile. This aluminum profile is 3-sided and
blind fixed to a finished wall opening. The door blade gasket will seal the
opening to this aluminum profile. Lock in the door blade: Espagnolet lock for a
automatic operated door. There should be electro mechanical lock mounted on
the track and on both sides a key-switch on the finished wall with Euronorm
cylinder and 3 keys. Automation with 2 sensors foot operation and hand
sensors (magic switch): Control: Microprocessor-controlled and regulated
electromechanical sliding door drive. Power supply: 1*230 Vac +15% / -20% or
1*110Vac +30% / -20%. Frequency: 50 / 60 Hz and power Consumption Minimal :18 W and Maximal : 450 W. Drive :3 phase AC motor and Nominal
Motor power:90 W. Maximal Motor power :225 W. Motor regulator:
Microprocessor controlled motor driver. Max. door weight : 250 Kg and Max.
door width: 3500 mm. Slow speed (V slow) :20 - 120 mm. / sec. and Starting
speed (V start) :20 - 220 mm. / sec. Opening speed (V open) :V slow - 800 mm. /
sec. and Closing speed (V close). V slow - 500 mm. / sec. Pedestrian opening
:10% - 90% of the available door opening.
9.
Indigenous Surgeon Control Panel (6 Tile)
Control panel should have all the controls within the theatre will be located on
a membrane type control panel mounted in the theatre wall. The panel will
incorporate all the necessary controls for the correct operation and monitoring
of the equipment and services within the operating theatre. The time elapsed
digital clock and real time digital clocks shall have high brightness characters,
The medical gas alarm will indicate High and Low gas pressure for each gas
118
1nos for 1 OT
service present in the operating theatre and will have an audible buzzer with
mute facility. The medical gas alarms will be connected to local pressure
switches located downstream of the last isolation valves. Each control panel will
be of 6tile and will have display for Time elapse clock, Standard Clock,
Temperature and Humidity, Clean room luminaries, Telephone, Medical Gas
Alarms.
10.
Indigenous Writing Board (List Board) Size: 1000x700x60deep
1nos for 1 OT
Size: 1000x700x60deep:Writing board should be made of ceramic having
Magnetic properties and should be flushed to the wall of the operation room.
11.
Indigenous X-Ray Viewing Screen
1nos for 1 OT
Size :1000x700x95deep :Twin plate X-ray view screen should be with electrical
safety codes for high & low voltage system. The theatre is to be equipped with
2 plate X-Ray viewing screens. It should be designed to provide flicker free
luminance for the film viewing purpose. It should be installed flushed with the
theatre wall for hygiene and ease of cleaning.
12.
Indigenous Storage Unit :Size 1700x865x350deep
The storage unit mfr from 1.2mm of Stainless steel. The doors of the storage
cabinet should house vacuum insulated glass, these doors should be installed
on the storage units with the help of imported fittings allowing an opening
allowance of at least 160degree. The storage unit should be divided in 2 equal
parts and each part should have individual doors with locking system .Each part
should be provided with steel racks which should be completely detachable
type.
119
1nos for 1 OT
13.
Indigenous 2 Bay Surgical Scrub Sink
1nos for 1 OT
Two Bay Surgical Scrub Sink with electric photo sensors and manual foot mode
to be fitted outside the OT : Surgical Scrub sink should be designed for use in
Operation theatre complex providing surgeons with a convenient sink for pre
op scrub up. Each fixture should be fabricated from heavy gauge type
304stainless steel of 1.5mm thickness & should be seamless welded
construction polished to a satin finish. The scrub sink should be provided with a
front access panel, which should be easily removed for access to the water
control valve, waste connections, stoppers & strainers. Hands free Operation
should include infrared sensor and foot operator with built in range of
adjustment. Thermostatic Mixing Valve control should be located behind the
access panel & maintain constant water temperature. User defined settings of
1,3,5,10 min are available. This timing should be adjustable to meet individual
application requirement, provided with infrared sensor thermostatic controlled
taps with fail-safe temperature controls. All units should have reduced anti
splash fronts. It should have manual foot and operation mode. Hospital should
provide geyser for warm water.
14.
Indigenous Distribution Board
Electrical Distribution Board will have all high voltage equipment should be
installed in a separate enclosure. The remote cabinet should house the
operating lamp transformers, mains failure relays, electrical distribution
equipment and circuit protection equipment for all circuits within the operating
theatre. All internal wiring should terminate in connectors with screw and
clamp spring connections of the Clip-on type mounted, on a DIN rail. Individual
fuses or miniature circuit breakers should protect all internal circuits.
120
1nos for 1 OT
15.
Indigenous Pressure switches for surgeon control panel alarm.
4nos for 1 OT
16.
Indigenous Pressure Relief Dampers/Cascade Stabilizer
1nos for 1 OT
Pressure relief dampers should be provided in each room to prevent
contamination of air from clean and dirty areas. Suitably sized air pressure relief
damper should be strategically placed, enabling differential room pressure to
be maintained and ensure that when doors are opened between clean and dirty
areas. Counter- weight balancing system should be provided in the PRD to
maintain positive pressure inside the operation room.
17.
Indigenous Electrical wiring, Conduting with fixtures inside the OT
1lot for 1 OT
Wiring with Low leakage current wires of FRLS wires as per requirements
including providing and fixing of conduting and boxes etc. to complete the work
in all respect. Wiring for 250 volts single phases and neutral 6/16 amps
switched socket outlet.
18.
Imported Medical Gas Hose Assemblies
Medical gas hose assemblies shall comply with BS EN 739. Hoses shall be color
coded throughout their length. All hoses shall incorporate an anti-static inner
core. Hose shall be permanently secured to all fittings with stainless steel
crimped ferrules, and shall incorporate a window to enable verification that the
hose is fully secured onto the hose barb as specified in BS EN 739 as follows:
Medical oxygen - white
Nitrous oxide - blue
121
20mtrs for 1OT
19.
Medical and surgical air - black
Vacuum - yellow
Imported Kite Mark certified Medical Grade Copper Tube and Fittings
12mmOD=100mtr
The piped distribution system shall use copper pipes manufactured from
phosphorous de-oxidised non-arsenical copper to BS EN 1412:1996 grade
CW024A (Cu-DHP), manufactured to metric outside diameters and having 15mmOD=200mtr
mechanical properties in accordance with BS EN 13348:2008 in either R250
(half hard) or R290 (hard). Copper pipes shall be carry the officially licensed BSi
kitemark and certification shall be provided for review. Degreasing of pipe shall 22mmOD=150mtr
be such that there is less than 20mg/m2 (0.002mg/cm2) of hydrocarbons on the
degreased surface when tested by the method specified BS EN 13348:2008.
Copper fittings shall be end feed type, manufactured from the same grade of
copper as the pipes and be in accordance with the requirements of BS EN 12541:1998 Part 1. Fittings shall be degreased suitable for oxygen use and be
supplied individually sealed in protective polythene bags.
20
Imported Trolley Mounted High Suction OT Units
It should be duly CE marked and comply with 93/42/EEC Medical Devices:
General and should have CE no. from a notified body. Certificate of Origin must
be given. Certificate of Origin must be given.
It must consists of the following :- 1no. Digital Suction Regulator and 2nos.
4000ml Polysulphone collection jar and both to be mounted on a trolley.
Digital Suction Regulator : Digital Vacuum Regulator should have digital display
which can be easily monitores at a long distance. The precise LED bulb enables
122
2nos for 1 OT
medical profession to monitor pressure. The unobstructed adjusting knob
design allows one hand operation. Digital Vacuum Regulator should be supplied
with collocated with 4pcs of AAA alkaline battery, allowing it for continuous
vacuum up to 500hours. Zero battery waste when the regulator is on OFF
mode. The Battery power bar Alarm display allows easy Understanding of
battery condition. The 8 power bars shall exhaust (1 hr/bar) only when battery
power is less than 2.5 volts. This Feature helps users to avoid any immediate
operation power shut down without any early warning. The battery off alarm
shall` exist until all bars diminish.
It should have an accuracy is +/- 1% of full range. Keep the elegant
REG/OFF/FULL mode set up design
Compact Light weight and durable construction design. Easy pressure adjusting
knob, simple operation
Large digital number display with Low/Med/High level Display Design. Eye
catching LED indicate color lights corresponding to
color code
ranges(Green/Yellow/Red). It will not waste battery power when the status is on
OFF mode to allow extending battery life. Digital battery power bar alarm
display. Allows easy understanding of battery Power condition.
3 mode selection digital
Vacuum regulator:
Pressure indicator light:
REG/OFF/FULL
Green Light: 0-80 mmHg
Yellow Light: 80mmHg-200mmHg
Red Light: over 200mmHg
Pressure measurement
+/- 1% of full scale
error:
Battery Requirement
123
AAAx4
Battery Continuous Usage:
Alkaline Battery: 500 hrs
Regular Battery: 190 hrs
Digital Gauge:
Size without adaptor:
Pressure Detection range 0-600 mmHg
3.07” (W) x 3.94” (L) x5.79” (H),
Polysulphone Collection Jar : 2nos. Polysulphone collection Jar of 4litres with lid
: it should be unbreakable and autoclavable upto 134º C must be fitted with an
extremely simple anti overflow safety device, thereby ensuring easy
maintenance. Should be totally transparent, they ensure perfect sucked liquid
visibility.
21.
Imported Anodized Aluminum body Oxygen Flow Meter with Humidifier Bottle
It should be duly CE marked and comply with 93/42/EEC Medical Devices:
General and should have CE no. Certificate of Origin must be given. Pressure
compensated to prevent back pressure build up on flow indicator. Durable
polycarbonate flow tube with cover. It should be made up of anodized
aluminum body and control knob. Flow meter should have twin graduated scale
which must provides precision control permanent scale graduations. Flow
meter should be placed in the vertical position. It should be light weight of
200g. It should have +/-4% gauge accuracy. Inlet pressure - 50-60 psi. The flow
meters should be of 1-15 LPM range for oxygen and with inlet pressure 5060psi. Bubble Humidifier bottle should be unbreakable, reusable to
disinfectants and complements.
124
1nos for 1 OT
22.
Imported Single Service 22mm Area Valve Unit ( O2/N2O/MA4 Air/ Vacuum)
It should fully meets and complies with BS 5684, BS 6832 and HTM 2022,
HTM02-01, C11 standards and must be duly CE marked with CE no. specified on
it. The Area Valve Service Unit (AVSU) should incorporate a ball value with NIST
connectors either side, mounted in a lockable box with emergency access. The
value should be complete with copper stub pipes that extend to the outside of
the box to enable easy connections to the Medical Gas Pipeline System (MGPS).
The value should operate from fully closed to fully open with a quarter turn of
the handle. The spades should be injection molded and color coded to show
through or blank identification. Should be full bore values for minimum
pressure loss and should have lockable in open or closed position. The Lockable
Line Values shall comprise full-bore ball value complete with copper stub pipes
for ease of installation. The values shall be connected to the copper stub pipes
by means of flat faced unions fitted with nitrile O-ring seals, allowing removal of
the value without the need to distort the pipe work. Stub pipes for values up to
54 mm will be connected to the value body using screwed connectors, whist
value above this size will use flanged connectors. The value will have a brass
body, end cap and stem, with a full –bore chrome plated brass ball. The value
shall operate from fully closed to fully open with a quarter turn of the handle.
All line values will be supplied with a mechanism to enable the unit to be
locked in the fully closed or fully open position. The stub pipes should have the
appropriate coded NIST connectors fitted each side of the value. The NIST check
values should have a metal seal, thus avoiding the possibility of digression over
time. The value box should have a universal back plate for first fix mounting and
an injection molded, cover which fits over the installed value. A color coded
service identity label will be fitted behind the value handle . The door should
also be injection molded and will be common for all services. The door should
incorporate a ‘Break Glass’ window or an optional quick release mechanism for
emergency access to the value. Should be reliable and easy to operate and
125
4nos for 1 OT
must have NIST connectors facilitate easy purge, sample and pressure testing,
and emergency, supply system. Should be easy site installation with prefitted
stub pipes. Should have break glass emergency access fitted as standard.
Should have optional quick release emergency access system. The Area Value
Service Unit (AVSU) should incorporate a ball value with NIST connectors either
side, mounted in a lockable box with emergency access. The value should be
complete with copper stub pipes that extend to the outside of the box to
enable easy connections to the Medical Gas Pipeline System (MGPS).
23.
Imported Low Flow Vacuum Unit
It should fully meets and complies as per EC Directive 93/42/EEC Annex II,
article 3. full quality assurance system medical devices. It should be duly CE
marked and CE no. to be specified. Certificate of Origin must be given. It must
consists of the following :- 1no. Suction Regulator and 1no. 1000ml
polysulphone collection jar. Suction Regulator : Suction regulator should be
supplied with a safety jar, including antibacterial filter and an anti overflow
safety device. Should have wide membrane continuous suction controller.
Should have vacuum levels : 0-250mbar/hPa. Should have vacuum gauge fitted
with a protective bumper device. Should have on/off knob allowing for the
quick restoration of a readjusted vacuum level. Must have central adjustment
knob with a color coded for 0-250 mbar/hPa. Should have polycarbonate 150cc
safety jar, autoclavable at 121º C, unbreakable, fitted with an anti overflow
safety device and equipped with a plastic antibacterial filter. Suction regulator
must have a unique serial number stamped on the body of each suction
regulator , thereby allowing for identification and trace ability. Polysulphone
collection Jar of one liters with lid : it should be unbreakable and autoclavable
upto 134º C must be fitted with an extremely simple anti overflow safety
device, thereby ensuring easy maintenance. Should be totally transparent, they
ensure perfect sucked liquid visibility.
126
1nos for 1 OT
24.
Imported AGSS Terminal Units
02nos for 1 OT
It should fully complies and meets with BS 6834, HTM 2022, HTM02-01and
C11, and must be duly CE marked with CE no. specified on it. It Should have
Integral balance value is accessible through the front of the outlet. Should be
Individually tested. Must be compatible with the AGSS Receiver System.
Construction of the first fix terminal block shall be of machined brass and
copper. The second fix assemble should incorporate an adjustable orifice for
flow controls so that system balance can be achieved without the need to
remove the fascia plate. The unit should be enclosed in a white ABS decorative
mounting box with an ABS fascia. Both the mounting box and fascia should have
rounded corners to avoid possibility of injury. The box should be supplied with a
flush mounting bezel as a plaster finish.
25.
Imported AGSS Remote Indicator (Plastic) to be fitted inside the OT
1nos for 1 OT
It should fully complies and meets with BS 6834, HTM 2022, HTM02-01and
C11, and must be duly CE marked with CE no. specified on it
26.
Imported AGSS Hose Assembly with Probe to be fitted inside the OT
1nos for 1 OT
It should fully complies and meets with BS 6834, HTM 2022, HTM02-01and
C11, and must be duly CE marked with CE no. specified on it
27.
Imported Duplex AGSS Plant 780l/min
It should fully complies and meets with BS 6834, HTM 2022, HTM02-01and
127
1set for 1 OT
C11, and must be duly CE marked with CE no. specified on it
Duplex AGSS System with twin AGSS pumps of 3phase 780 Lpm capacities
each with built in flow indication and pressure regulation valve. It should be
mounted on single frame with control panel and separate warning label.
Active anesthetic gas scavenging systems should be designed to safely
remove exhaled anesthetic agents from the operating environment and
dispose of them to atmosphere, thus preventing contamination of the
operating department and providing a safe and healthy workspace for the
personal. AGSS design should be dependent upon flow rate and
pressure drop characteristics of the individual components of a systems,
it is essential that terminal units, remote controls and pump units.
28.
AGSS wiring from AGSS plant to all OT
1lot for 1 OT
29.
Hand Rail Crash Guard System for outside OT:
20mtrs
The system fixed to brick wall at 900mm center high from finished floor level
comprising continuous aluminum rail retainer, adjustable rail mounting base,
with impact absorbing strip, end cap and high impact vinyl acrylic snap-on
textured surface cover.
30.
Corner Guard Protection System for outside OT.
The system fixed to brick wall at the corner from finished floor level. Adjustable
end cap. High impact vinyl acrylic snap-on matt finished. “50mm wide x 10mm
thickness x 900mm length “. Corner guard system consist of following: PVC
cover, base, top and bottom end cap in different color etc.
128
10nos.
Special Condition and Experience Criteria
Bidders should have past experience of any one or both i.e. modular prefabricated operation theater
and medical gas pipe line system and should have successfully completed as a prime contractor one
project of modular prefabricated operation theater + medical gas pipe line system or modular
prefabricated operation theater only or medical gas pipe line system only in India for a value of
minimum Rs.09crores or two projects for a value of Rs.6corores or three projects for value of
6crores in any government hospital/institutions in India during last five years. The copies of orders
/completion certificate shall be submitted. The value of executed works shall be brought to current
costing level by enhancing the actual value of work at simple rate of 7% per annum; calculated from
the date of completion to last date of issue of tender papers. and there will be no relaxation in the
above is permitted and allowed.
Bidders should have an average annual turnover for past consecutive five years of minimum twenty
hundred lakhs ending 31st March 2011 in the immediate last 5 financial years. Tenderer should not
have occur any loss in any of the past 5 financial years. Profit and Loss account should be submitted.
CA certificate for the immediate last five consecutive financial years should be submitted along with
the bid. No relaxation in the above is permitted.
Bidders should have a minimum bank solvency of 500lakhs from a nationalized/scheduled bank.
(copy of the solvency certificate must be submitted.
Bidders should be registered with ESI/PF. Registration certificate must be submitted.
129
Bidders should submit a mandatory letter of authority from the distributor of original
Foreign Principal / Manufacturer for the quoted products. The Indian agent who is quoting on behalf
of original Foreign Principal /Manufacturer for the quoted products must be distributor with the
similar company for continuous last five years for the quoted products. Letter should be submitted in
this regard as a proof for experience and failing which bid will be rejected.
Bidders should not be blacklisted or debarred in the past by any government institute/hospital ( in the
past means since incorporation of the company) Eligible Bidders must submit an affidavit on stamp
paper and failing which bid will be rejected. False information if submitted then bidders will be black
listed or debarred from any government hospital/department.
Eligible Bidders who are registered in India and have minimum 5years standing/experience of
modular prefabricated operation theaters/medical gas pipe line system in India can only apply. Proof
of firm minimum 5years old registration certificate alongwith TIN no certificate, Pan card and one
order of modular prefabricated operation theater/medical gas pipe line system from any government
hospital/institution/department in India.
Bidders should have past experience of execution of minimum fifteen modular prefabricated
operation theater in government hospital in India during last in the last 5 years ending 31st July 2011.
Bidders should clearly mention country of origin with name of Mfg., company for each and every
products quoted by them and failing which bid will be straight way rejected.
All medical gas pipe line products should be from one single international standard either HTM 02-01
2006, C11 and CE marked .
130
Bidders who are quoting the bid should have at least one AP from MGPS LTD UK an independent body
on HTM02-01 standards. Copy of the certificates must be submitted along with the bid.
Bidders should not quote any optional items. If any firm quotes any optional items they will
disqualified. Firm must quote strictly as per the desired specifications and items mentioned in Tender
requirement and failing which bid will be rejected.
No joint venture or work executed by two companies will not be considered.
Tenderer should not quote any optional items. If any firm quotes any optional items, they will be
disqualified. Firm must quote strictly as per the desired specifications and items mentioned in BOQ
and failing which bid will be rejected.
As this is a time bound Project, accordingly, offers from bidders who can comply & ensure timely
completions of the Project within 8 months will be appreciated.
If any information furnished by the applicant is found incorrect at a later stage, the applicant shall be
liable to be debarred and blacklisted from participating in future tenders. The department reserves
the right to verify the particulars furnished by the applicant independently. Even though the agency
meets all the criteria, TMC reserves the right to accept or reject any applicant/disqualify any agency
without assigning any reason whatsoever.
131
Notwithstanding anything stated above, the Purchaser reserves the right to assess the Tenderer’s
capability and capacity to perform the contract satisfactorily before deciding on award of Contract,
should circumstances warrant such an assessment in the overall interest of the Purchaser.
The Purchaser reserves the right to ask for a free demonstration of the quoted equipment at a pre
determined place acceptable to the purchaser for technical acceptability as per the tender
specifications, before the opening of the Price Tender.
The applicants are advised to visit the site to get first hand information as regard its approach,
accessibility, working conditions, site conditions, availability of labour and material etc. and other
matters affecting cost and work. All costs incurred in connection with submission of the prequalification application shall be borne by the applicant irrespective of the outcome.
132
NAME OF DEPARTMENT:- MEDICINE
S.No.
01.
Item Code No.
med.-001
Name of Equipment
Specification
BODY
PLETHYSMOGRAPH
SYSTEM
WITH
DIFFUSION STUDY
1. Fully automatic computerized unit for
the measurement of following parameters:
o Spirometry
&
Flow
Volume
Parameters.
o Maximum Voluntary Ventilation
(MVV),
o Lung Volumes & capacities including
RV & TLC.
o Airway Resistance & conductance Raw (Insp. Exp. tot), SRaw, Gaw,
SGaw,
o Single Breath Diffusion Capacity of
Lungs (DLCO-He) & Intra Breath.
o Lung
compliance
(Static
&
Dynamic),
o MIP/MEP for Reapiratory Muscle
Strength,
o Pre & Post Bronchodilator tests,
Should Meet Criteria for ATS Standards.
Automatic DTPS correction.
Should meet all International Safety
Standards.
Should have predicted equations.
2. Body Plethysmograph System with
Box (size > 900L or more) to provide
sufficient space to patient, With
Visibility from all directions.
3. Intercom System to be provided for
133
Comp./Divt.
02.
med.002
Fiber optic
Bronchoscope
source
and
light
Communication with patient while sitting
inside the Box.
4. Should be supplied with PFT Software
Window XP based.
5.
Manufacturer should have a local
office with complete technical backup
capability (preferably)
1. field of View should be 120 degree or
more
2. Depth of field should be 3-50 mm or
better
3. Distal end diameter should be 5.8 mm or
less
4. Insertion tube diameter should be 5.8
mm or less
5. Channel diameter should be 2.2 mm or
more
6. should be light weight and easy to use
7. Working length should be 550 mm or
more
8. Total length should be 800mm or better
9. UP and DOWN angulations should be
180 degree and 120 degree or better
10. Can be fully immersed in disinfectant
solution and water
11. Should have autoclavable suction valve
12. Should be compatible with laser and
electro-cautry.
Light Source should be compatible with 150
watt halogen bulb with sharp output.
134
03.
med.-003
Polysomnography System
For Sleep Disorders Study
13. Manufacturer should have a local office
with complete technical backup
capability (preferably)
Polysomnography system that records and
displays physiological parameters. Should
have following Channels:o EEG
o ECG
o Sp02
o Snoring detection
o Chin and leg EMG
o Pulse Rate.
o Respiratory Effort,
o CPAP Pressure
- Should have adjustable gain and filters.
- Should have facility of on line scoring of
events during the recording
- Should have LAN interface for Data
communication to PC.
-Should have automatic Sleep staging with
Manual Over-ride, Respiratory
Analysis /PLM's Analysis, Neurological
events.
- Should be supplied with fully
synchronized Digital Video.
- System should have option of scoring
sleep and other events as per AASM
guidelines
- Manufacturer should have a local office
with complete technical backup
135
04.
med.-004
Video Bronchoscope
05.
med.-005
Suction Machine
capability (preferably)
1. It should have good crisp, clear image
quality.
2. Outer diameter should be 6.0mm or less.
3. Channel diameter should be 2.8mm.
4. Insertion tube length should be approx.
600mm.
5. field of view should be 120 degree or
more.
6. Angulation - UP- 180 degree, down - 130
degree.
7. Minimum visible distance should be 3mm
or less.
8. Should be compatible with laser and
electricity
9. Manufacturer should have a local office
with complete technical backup
capability (preferably)
• Should be based on diaphragm technology.
• Vacuum should be more than – 60 mmHg
with flow rate of at least 8 Ltr. per minute
or more.
• Should be made for continuous purpose.
• Should be operated from mains or battery
mode (over 100 minutes).
• Should have optical and acoustic warming
signal for battery charge.
• Jar capacity should have minimum 2 Ltrs.
(Non breakable).
• Should have provision for trolley
136
DEPARTMENT - ORTHOPAEDITRS
S.No.
1
Item Code No.
ORT-01
Name of Equipment
Specification
Battery operated hand drill
2
ORT-02
Electric drill system
3
4
ORT-03
ORT-04
Manual Drills
LED OT lights
mounted
5
ORT-05
Electronic pneumatic tourniquet
6
ORT-06
Electric plaster cutter
7
ORT-07
Watson-jones type traction table
8
ORT-08
Ceiling suspended laminar air
flow
9
ORT-09
Interlocking nail instrument set
universal for tibia and femur
10
ORT-10
Flexible reamers set with fixed
reamm heads from 8-16 mm
with charging station with drill and saw attachment,
fully cannulated with reverse and forward operation
with lock, autoclavable with maximum speed of
800-1000 rpm with a set of three batteries, 15 saw
blades of various sizes
Foot operated with drill and saw attachment/flexible
reamer attachment with flexible reamer set and
flexible shaft autoclavable with quick coupling, And
reamer heads of all sizes from 8-16 mm at increment
of 0.5
Autoclavable with stainless steel body with key
Infrared Remote control, Variable colour
Temperature, Digital confrol panel with light
rotation of 360 degree with a sterilizaable hndle to
focus and position with illumination intensity of
approx 2.5 lux
With 5 cuff sizes with extra one set of 5 cuffs and
alarm. Electronic Digital Display with 3 hrs Battery
Backup
With oscillating saw with variable speed and all
sizes of blades
With foot and knee attachmentswith height
adjustables
To suit OT size of 625 sq. feet with mini HEPA
filters with noise requctrion with ss body PU coated
with air conditioning
Universal jig for tibia and femur, with nail extraction
device, drill sleeves, trocar hammer.
Stainless steel with silicon exchange tube box
11
ORT-11
Bipolar Cautery
ceilling
Operated on 230V+/-15V, 50 Hz+/-3%
Should have 4 output features
137
Comp./Divt.
Monopolar Cutting 1 and Monopolar Coagulation 1
Monopolar Cutting 2 and Monopolar Coagulation 2
Bipolar Cutting 1 and Bipolar Coagulation 1
Bipolar Cutting 2 and Bipolar Coagulation 2
Should have digital display and colour coding and
acoustic signal and can be operable by both hand
and foot switches.
It should have following Rated Frequency
Monopolar Generatior:> 300 KHz
Bipolar Generator : Upto 1000 KHz
Bipolar Cutting should offer following Modes
Pure Blend Cut: Cut with low degree of eschar form
Blend Cut : Cut with considerble eschar current
Forfex: Mechanical cutting with strong hemostasis
Bipolar Coagulation should offer following
Modes
Macro Coagulation: Large forceps
Macro Stop Large forceps with auto stop
Auto macro: Large forceps with auto start and suto
stop
Micro Coagulation: Small forceps
Micro Stop : small forceps with auto stop
Auto Micro: Small forceps with auto start and auto
stop
SEAL SAFE: For vessel sealing
Endo Seal Safe: Endoscopic vessel sealing
It should have
LED Display for monopolar and bipolar cut and
coagulation
Acoustic signal for monopolar and bipolar cut and
coagulation
Colour code for cut and coagulation
The Unit should be quoted along with the following
138
Accessories
1)Monopolar set of Accessories (1 set)
Consisting of :
Hand control pencil
1 No
Double pedal Footswitch
1 No
Patient plate
1 No
Electrode set of 5
1 set
2) Bipolar Footswitches
1 No
3) Bipolar Forceps
1 No
4) Bipolar Cable
1 No
139
DEPARTMENT OF DARMATOLOGY
S.No.
1
Item Code No.
SK-01
Name of Equipment
RADIOFREQUENCY UNIT
Specification
Frequency 3.8 Mhz Power output 140 walts
Tungsten wire electodes Autoclavable hand piece and
neutral Plate Finger switch and foot switch activated
2
3
SK-02
SK-03
PUVA Chamber
Cryo Surgery Unit
4
SK-04
Long Pulse Nd : YAG Lager
5
SK-05
Fractional CO2 Lager
6
SK-06
IPL
7
SK-07
Hyfrequator
8
SK-08
Woods Lamp
32 Lams 120/240 VAC 311 UVB NB LT 100W
Wave Length 1064 mm/532 nm
Spot Size 2 mm, 4 mm, 6 mm
Fluence upto 12.5 J/Cm2
Pulse width 3+/– 1 NS
Freq. 532, 1064 nm
Energy 200-2000 mj
Spot Size 3 mm, 6 mm, 9 mm
Fractional HP 9 mm
Wavelength - 10600
Power to Tissu 25 W
Operation Mode CW,
Single Pulse
Ultra Pulse
Repeat Pulse
Ultra Peak Power 800 W
Ultra Peak Freq. 10-990
Ultra Pulse Duration 100 µs- 1700 µs
Source Flash Lamp
Wavelength 550 nm
600 nm - Fluence
2-25 J/cm2
Power - 230 V AC
Frequency 3.5 Mhz
Power s140 W
140
Comp./Divt.
9
10
11
12
SK-09
SK-10
SK-11
SK-12
Dermascope
Electric Derma Brader
Iontophoresis Unit
Q Switch Nd : YAG Lager
Output - 40 VA, Speed foot control
Hand and Foot Plate
Wavelength - 1064 / 532 nm
Energy - 12.5 J
Pulse Duration - 8 ns
Spot Size 1-7 mm
Electrical Power 220 V
141
NAME OF DEPARTMENT : RADIOTHERAPY
S.No.
01.
Item
Code
No.
RT001
Name of
Equipment
Linear
accelerator
high
energy
Specification
1.
Description of function
1.1 Dual energy medical linacs utilize photons of 6 MV and less than 15 MV
and electron beams up to 20 MeV to treat both benign and malignant
disease.
2.
Operational requirements
2.1 High energy linear accelerator complete with treatment planning system and
working console is required.
3.
Technical specifications
3.1 A. STANDARD EQUIPMENT
1. Photon energy : 6 MV for low energy and less then 15 MV for high
energy
2. Electron energy : 6 Beam energies between 4-20 MeV.
3. RF source :Magnetron / Klystron
4. Waveguide type : Standing / Traveling wave
5. Electron gun : Sealed /unsealed
6. Treatment modes Normal - TSD/TAD
Rotation - CW/CCW
ARC-CW/CCW
Dose rate - MU/degree
7. Dose rate for photon energy : 200 MU/min and above in steps or higher
dose rates for both photon beams.
8. Dose Rate for electron energy : 100-1000 MU/min in steps or higher dose
142
Comp./Divt.
rates.
9. Field size (Unclipped)
10. Field size (Unclipped)
For electrons : Max - 25 x 25 cm2 or more , Min - 4x 4 cm2
A method to obtain irregular field shapes shall be provided.
11. Beam Flatness (PHOTON) :
Variation of x-ray intensity relative to the central axis sizes 10x10 cm2 to
40x40 cm2 at 10 cm depth.
12. Beam flatness (electrons):
Variation of electron intensity relative to the central axis sizes 10x10 cm2 to
10x10 cm2 at 10 cm depth.
13. Focal spot size :
14. Photon Arc Therapy : Bi-directional arc therapy should be included with
automatic calculation of dose per degree based on the dose rate selected and
the arc angle set.
15. Beam symmetry :
The maximum percent difference of average doses shall not exceed 2% for
electrons and 3% for photons.
16. Gantry rotation :
a) Read out - Digital and Mechanical
b) Accuracy dig readout 0.5.
c) Control - Hand pendent and control console.
d) Target - Axis distance - 100 + 0.2 cm
e) ODI Range - 75 cm to 150 cm
f) ODI Accuracy + 0.1 cm
143
g) Gantry rotation iso centre 2 min diameter. sphere
h) No beam stopper.
17. Collimator :
Rotation +95 about mid position
Control hand pendent and control console
Readout accuracy + 0.5
Collimator rotation iso centre 2 mm diameter sphere
Dynamic wedge / motorize wedge.
18. Asymmetric collimators x Y both asymmetrical
specify travel ranges and over travel range.
19. Multi leaf collimator (MLC)No. of physical leaves 80 and above.
a) Independent drives
b) Leaf width as iso centre = 10 mm
c) Capable of performing dynamic conformal therapy procedure interface
between MLC & existing network system should be provided.
d) Facility to treat patients conventionally using blocks without MLC
e) Work station HW/SW- specify details
f) Integration (full networking) with planning system, simulator, CT, CT
simulator, MRI & RFA should be done
g) IMRT delivery should be possible
h) Max. leaf retracting position
i) High over center travel of MLC leaves for IM"RT treatments
144
j) Max field length
k) Leaf height and material
l) Coincidence of light and x-ray field
m) Penumbra
n) Transmission
o) Interleaf leakage
p) Leaf position accuracy
q) Max. carriage speed
r) Max. leaf speed
s) Positional accuracy of the leaves during treatment
t) Inter digitations of leaves if available
u) Two Numbers of treatment parameter monitor 21" TFT to be provided
20. Treatment couch :
1. Versatile extended range couch with indexed immobilization movements.
2. Longitudinal lateral vertical and rotation
3. Electrical / mechanical control
4. Control local and /or remote
5. Opening window - Tennis racket / mylar
6. Fully carbon fiber table top for better quality portal images.
7. Minimum height from floor - app 60-65.
2.1 Treatment planning system
1. The TPS software shall run on a very powerful graphics intensive
145
computer system with adequate latest backup technology. The system shall
have high capacity hard disk and a DVD writer.
2. Capable of performing conventional 3D-CRT, SRT,.intensity modulated
radiotherapy treatment planning for coplanar and non coplanar beams and
IGRT Planning in the same system.
3. Supports, multiple dose calculation algorithms such as anisotropic
analytical algorithm convolutioal and pencil beam algorithm monte carlo
etc.
4. At least two calculation algorithm for photons and two for electron beam
shall be quoted.
5. Virtual simulation using the software and licenses for virtual simulation
feature and for controlling moving laser shall be provided.
6. DICOM ready image networking.
7. Two workstations enabling simultaneous contouring with license and
additional two treatment planning work station with calculation license
should be provider.
A.
Beam data
1. Dosimetric data for IMRT fields must be transferred from RFA.
2. Conventional standard beam data for electrons and photons must be
stored and modification of it for IMRT and conformal treatment must be
done.
B.
Patient anatomical data transfer :
1. The patient data must be transferred from CT/MRI, simulator in the form
146
of fluoroscopic image and CT/MRI via Dicom, CD and DVD's.
. Data from CT/MRI slices must be transferred via film scanner, digitizer
and direct from CT/MRI scanners, simulator and RFA.
3. The system must select more than or equal to 100 images per patient and
to do real time multi planer reconstructions from original CT/MRI image
data sets.
4. The system must have auto contouring of external and internal organs
from CT/MRI images either taken form CT/MRI film or via other mode of
data transfer as mentioned above.
C.
Planning :
1. Geometric planning :
System must have auto contouring of organs. After dose prescription and
fractional scheme system must create geometric treatment plan with 3-D
visualization and virtual simulation.
2. Dose optimization :
System should have provision to generate the treatment plans from
templates that satisfy the organ dose constraints. Following steps should be
taken :
1) Define dose volume constraints
2) Set optimization parameters.
3) Evaluate optimization
3. Dose calculation :
System should be able to provide dynamic / step and shoot IMRT treatment
planning and license for Florence map to be exported on DICOMRT
147
format. The necessary interface for transfer of treatment plans to any linear
accelerator should be provided. The final dose distribution is calculated as
per selected dose delivery technique.
4. Plan, Review and evaluation :
It must provide 3-D dose visualization and differential and cumulative DVH
analysis tools to review the plan.
5. Plan export :
The IMRT plans can be exported directly after approval to linear
accelerated for dose delivery.
D.
The inverse planning system :
Should be complete in all respects and be able to perform static / dynamic
MLC plans. The system should be able to generate multiple plans for
selection. The accuracy of forward dose calculation using intensity
modulated beams should be less than 2%. The IMRT planning and
treatment should be based on step and shoot and or sliding window MLC
technique as per the user choice.
The total time for inverse planning should be less than 20 minutes.
A complete QA kit for the system must be supplied. Necessary software for
linking RFA to the planning system must be supplied.
22. Oncology information system complete with networking
Record and verify system
Transfer of all parameters from simulator and treatment planning system,
Cad plan to the accelerator for automatic treatment set up and delivery
should be provided.
Transfer fluoroscopy images from simulator to portal imaging system for
148
comparison should be provided.
23. Accessories :
1. Wedges - Stationery 150,30,450 and 60 wedge angle.
2. Front pointer - Mechanical
3.Accessory mount - shadow block tray
4. Blocks - divergent / non divergent
5. universal clamps
6. Side rails on both sides of couch for mounting accessories
7. CCTV/Camera two Nos. one wide angle and one remote control with
remote zoom and focus facility.
8. In room color monitor 20" or higher.
9. Laser alignment system 4 cross laser system
10. Interface mount to be provided for the simulator to stimulate accessories
like shadow block tray etc of the quoted accelerator model.
24. Dosimetry system (Photons)
Built in chambers. Two separate sealed chambers
Precision + 1% or 1 MU
Linearity+ 1% or 1 MU
Reproductively + 2% or 1 MU
Dose Rate Dependence
B.
Portal imaging and dosimeters accessories
1. Portal imaging :
Should fully integrate with accelerator
Should be able to images at any gantry angles with variable X-Y-Z
149
movements,
Robotics arm with remote control.
Should have digital technology with high resolution 1024 x 1024 pixels or
more imaging (Amorphous silicon flat panel based technology).
2. Auto field sequencing
3. Dosimetry accessories :
1. 3D Servo controlled radiation field analyzer having compact water
phantom of minimum dimension 60x60x60 cms or more with reservoir
build up caps. TNC connector and latest PC control system with IPS
interface program.
2. Dual channel electrometer
3. Ionization chambers (Signal, Reference and Pinpoint)
4. Diode detectors (Photons, electrons and sterotactic)
5. Parallel plate chambers
6. 2D arrays of either semi conductor / ionization based dosimetry system
for measurement of fluence along with computer hardware and software.
7. Solid water phantom universal tissue equivalent along with necessary
and for the chamber of size 30 x 30 30 cm should be provided.
4.
System configuration accessories, spares and consumables.
4.1
System as specified
4.2
All consumables required for installation
standardization of system to be given free of cost.
4.3
The chiller system shall be provided along with the
machine by the principals.
150
and
8.
4.4
A closed circuit color TV system with TV monitors and
two cameras in the linac treatment room shall be supplied.
A patient calling system with 6 channels shall be
supplied. Internet broad band connectivity for remote
control shall be provided. A LCD projector should be
supplied.
4.5
Patient immobilization accessories
4.5.1
Standard supine base plate
4.5.2
Lateral base plate
4.5.3
Head and neck prone baste plate
4.5.4
Head and neck supports A, B, C, D, E
4.5.5
Knee crutch and arm position with hand grip
4.5.6
Overhead arm postioner
4.5.7
Shoulder retractor
4.5.8
Universal tissue equivalent bolus 30x30x0.5 cms
Documentation
8.1
User /Technical / Maintenance manuals to be supplied in
English.
8.2
Certificate of calibration and inspection
8.3
List of equipments available for providing calibration and
routine preventive maintenance supports as per
manufacturer documentation in service / technical
manual.
8.4
List of important spare parts and accessories with their
151
part number and costing.
8.5
Log book with instruction for daily, weekly, monthly
quarterly maintenance checklist the job description of the
hospital technician and company service engineer should
be clearly spelt out.
8.6
Additional documents to be enclosed with quotation :
a. No of similar models : India / World (enclose list of
institutions)
b. No. of certified engineers in India (enclose list of
names)
c. Remote diagnosis facility (India / Abroad) availability
details
CT
Simulator
A-1
Dedicated CT Simulator is required for Radiotherapy Department for conventional
3D CRT and IMRT planning. The CT simulator is required for most accurate
simulation placement of treatment fields and marking of radiation field portals on
patient skin for radiation therapy of cancer patients. It should be latest, state of the
art model. The CT scanner should be a spiral, multi slice incorporating, latest
technology available in the market. The simulation software should be user
friendly and should ensure easy, error free and total compatibility between scanner
and simulation workstation. If third party software is supplied, it will be sole
responsibility of the vendor supplying the CT simulator to run the software. The
system should be able to integrate the virtual simulation software, workstation to 3D TPS and linear accelerator of the department and this will be entirely and direct
responsibility of the vendor. The equipment supplied should be typed approved by
AERB Mumbai.
A-2
152
CT-Scanner Specification
A-3
Whole body spiral, multi slice (minimum 16 slices per rotation) CT with flat table
and other accessories for radiotherapy treatment planning and simulation. The
system should have following essential features :
A-4
Gantry :
1. Gantry aperture should be minimum 80 cm or more.
2. Gantry tilt should be at least 30 degree.
3. Scan field of view should be 50 cm or more.
4. Metal free scan able range should be at least 150 cm.
A-5
X-Ray Generator
High frequency x-ray generator with an output of at least 50 KW or more. Please
give details.
A-6
X-Ray tube
i) The x-ray tube should have anode heat storage capacity of 5 MHU or more.
ii) The anode peak heat dissipation rate should be 700 KHU / min or more.
iii) The x-ray tube should have dual focal spot (please specify the size of each focal
spot).
A-7
153
Detector system
1. The detectors should be solid state, preferably rare earth material.
2. It should be free from repeated calibrations.
3. The detector system should be able to acquire at least 16 slices per rotation.
A-8
Patient Couch :
a) The scanning table should be universally flat with flat table top and should be
compatible with the tables of linear accelerator installed. The table should have
patient positioning index system on carbon fibre table top. It should have following
features :
i) The table should be able to bear weight up to 180 kg or more.
ii) Horizontal accuracy should be 0.50 mm or less.
iii) It should be possible to move the table top from the table side and control
console and hand pendent.
iv) The table should have auto home facility.
v) All patients positioning accessories including tilt should have control both from
gantry and control console.
A-9
Control Console
i) It should have 18 or more color monitor for display of 1024x1024 matrix or
more.
ii) All the function viz scanning, image, reconstruction, film documentation, MPR,
CT, maximum intensity projection, 3D with SSD etc should be possible from main
console and workstation.
iii)Image storage of 120 GB or more for at least 100000 images in 512x512 matrix
uncompressed or better.
154
iv) DVD facility for archiving must be available.
A-10
CT Scanning Parameters
i) The slice thickness should be users selectable from 1.0 mm to 10 mm.
ii) KV range 90 to 140 KV
iii) mA : 400 mA or more in increment of 10 mA.
iv) Scan time for full 360 degree rotation should be 0.5 sec. or less.
v) Display field of view should be 50 cm or more.
vi) Intra-plan delay of 5 sec or less should be possible.
vii) Retrospective reconstruction should be possible raw data files change in
parameter such as FOV.
viii) The following scanning mode should be possible scan gram : Axial and spiral.
It should be possible to mix spiral and axial mode. Specify how may modes can be
mixed.
ix) Pilot scan : The pilot scan field size should be more than 1000 mm long. The
reconstruction time for pilot scan should be 3 seconds for a 512 matrix and 5
second for a matrix of large size.
x) Reference scan should be possible on an arbitrary slice within the proposed
treatment volume.
A-11
Image Quality :
i) Highest contrast spatial resolution :
It should be 15 lines pair per cm or better (for 50 cm FOV) maximum at 0% MTF
for a slice of 1 cm thickness. Clearly specify the photon used, scan time, mA filter
for image construction, scan field, dose and MTF. Phantom should be supplied.
ii) Low contrast detectably :
155
The low contrast resolution for CATHPHAN should be at least 5 mm or less at
0.35% with 10 mm slice on 20 cathphan phantom.
iii) Spiral parameters : Different selection of pitch should be possible from 0.5 to 3
in 0.1 increment inter scan delay in different group of spiral should not be more
than 5 seconds.
A-13
Standard Software's :
Should provide standard software including following features :
i) Complete scanning and evaluation software.
ii) 3-D surface shaded and 3D volume rendering.
iii) Quantitative CT measurement tools should be provided.
iv) 3D small volume analysis software for solitary nodules is desirable.
A-14
Hard copy system
A dry chemistry laser camera 500 dpi or more with digital interface and control
integrated with main console. the camera should print a 14"x17" film size and it
should be DICOM compatible.
the price should be quoted separately.
A-15
Essential Accessories :
1. Head holding position kit
2. Standard supine base plate (head and neck)
3. Lateral base plate.
4. Carbon fiber titling base plate (head and neck)
5. Head and neck prone base plate
156
6. Belly board for hip and pelvis positioning and fixation
7. Hip fix
8. Breast and thorax positioning system CT compatible.
9. Overhead arm positioned
10. Breast board (carbon fiber) CT compatible.
ii) Lead Glass :
200 cm x 150 cm or more with lead equivalent to meet the radiation.
MOVING LASER SYSTEM
The CT simulator should have at least three lasers. Out of which one should be
mounted on the ceiling and two lasers should be mounted on side walls. The lasers
should be computer control moving lasers. The simulation work station should
control the moving lasers for marking the field reference points other than couch
movement. Since the computerized moving laser for making the field reference
point other than couch movement. Since the computerized moving laser marking
system is of paramount importance the vendor has to support the claim in this
regard by authenticated broachers and documents. In addition to the moving laser
the CT-scanner should have conventional in built lasers for positioning the patient.
A-17
CT SIMLUATION WORK STATION
A-18
GENERAL
The work station should have advanced CT simulation tools for radiation therapy
treatment planning include work station that can control the laser marking system.
Any CT simulation work station that can not control the laser marking system is
not acceptable and liable to be rejected. The vendor should give a completed
description about the laser marking system offered and how the CT simulation
157
software integrates with it and TPS. All necessary calibration / quality assurance
phantom / check device should also be provided, please specify. The work station
should be able to provide complete volume definition and geometric beam
placement for radiotherapy. It should have complete compatibility and error free
networking with the CT scanner computer and TPS. The CT simulation should
generate digitally reconstructed radiographs a true volumetric environment. It
should be possible to overlay the beams on any DRRs or on any slice (obtained and
reconstructed). It should be possible to load over 250 CT images per patient for
reconstruction and simulation.
a) Hardware
i) Hardware specification should be mentioned clearly the system should be
running on a high end work station platform of reputed bran dlsike sun micro
system / H.P. workstation / Del / Silicon Graphics with at least 2 GB RAM or
more. Minimum 128 bits processor with minimum of 120 GB hard disk or more.
ii) The user interface should be windows based and menu driven. Display should
be on a 18" or more LCD flat panel display monitor of high resolution of
1024x1024 pixel or more should be provided.
iii) Mention the number of full512x512 slices real time processor can hold online.
iv) A compatible 56 kb internal / external modem should be provided for remote
diagnostic upgrades.
v) The archiving media should be a DVD.
vi) Networking with TPS-all the software with license required should be included.
vii) Laser printer should be provided.
viii) It should be possible to take print out on this printer from any of the TCT
simulation workstation.
158
b) Software
i) Software should be unix /window / silicon graphics based system.
ii) The software should have a volume accelerator for high speed 3D rendering at
full spatial resolution.
iii) On the monitor screen it should be possible to view at least 36 images or more.
iv) The standard screen layout should consist of one main view port and three sub
view ports for frequent usage of other images, quick manipulation of images, or for
displaying reference views, while the main view port is used for high resolution
display.
v) Image manipulation such as changing window width and window level, hot keys
activated automated study archive, deletion, screen layout changes, disk space
display archiving and graphic overlays such as annotation.
vii) It should possible to visualize interactive reference views in axial, coronal,
sagitals, iso center image planes and in any oblique directions with overlay of
beams in DRRs.
viii) DRR must provide fully divergent beam's eye view of 512x512 matrix.
ix) The DRR/BEV and Room eye view image should display the machine diagram
to allow real time checking of machine and patient geometry.
x) Facility for multi modality fusion to accept the data from other DICOM
compatible and DICOM supporting modalities such as MRI / CT / SPECT / PET
should be able to fuse them.
A-19
CONTOURING
i) Volume definition should be possible using volume segmentation using
threshold free hand contour tracing, contour editing 3D an isotropic margin etc and
any other advanced tools.
159
ii) System must be able to contour in axial sagital, coronal and oblique projections.
iii) It should be possible to do manual semi automated, fully automated contouring
/ segmentation in the images by defining volume of interest.
iv) Mention the time taken for automated contour with a single mouse operation for
250 slices.
v) The software should have facility for automated uniform or non-uniform
margins. For example it should be possible to expand the clinical target volume
CTV on all three dimensions by same magnitude or by different magnitude to
define the planning target volume. Any software without this automated uniform /
non uniform feature will be considered as inadequate.
vi) It should be possible to copy one organ to another with margin and margins on
a single slice a range of slices or all slices.
viii) Interpolate algorithm should be available to provide shape based interpolation
i.e. after contouring only in selected slices. The algorithm should automatically
interpolate the closely fitting contour in other slices.
ix) Interpolated contour may be edited accepted or rejected.
x) Tracking of source to skin distance should be possible.
xi) Contouring and editing and extraction of wall should be possible.
A-20
ISOCENTER MANAGEMENT
i) The advance should support separate iso center for multiple target volume or
general regions.
ii) Marked and final iso centers should be reported and displayed in the localization
package for easy confirmation of a physical simulation session.
iii) Hardcopy of the isocenter coordinates should be possible for record of the
160
simulation session.
iv) Isocenter positioning should be automate.
v) No limit on number of isocenter per target.
A-21
VIEW AND VOLUME RENDERING CAPABILITES
1) Post processing features like volume rendering real time multi axial volume
reconstruction, 3-D surface rendinger color 3D should be available.
ii) It should allow completed 3D volume to be defined including complex 2D
volume user selectable multi image views, became eye view room eye and DRR.
iii) DICOM radiotherapy plans and data structure with import / export of data
should be possible. The DICOM compliance statement should be provided.
iv) Accuracy of locating any point in 3-D should be 0.1 mm or less.
A-22
BEAM PLACEMENT & DEFINITION
i) If should support extensive beam shapers (shielding blocks etc) and beam
definition methods.
ii) Manual or automatic beam placement tool.
iii) Tools for real time checking of machine geometry.
iv) Beam shaping should be possible in multiple ways like automatic shielding
block definition confirmation to selected volume definitions aperture or shielding
manual free hand definitions automatic collimator jaw or multiyear position
definition.
v) It should be possible to define this asymmetric collimator feature where both the
X and y axis of jaws are asymmetric in the CT simulation software, similarly the
software should allow multi leaf collimator placement up to 40 pairs or more. Any
software that can not handle 40 pairs of MLC leaves is not acceptable.
161
A-23
DRR FEATURES
1) Interactive DRR calculation mode must be available
ii) Automatic window width /. level selection for DRR.
iii) DRR should be interactively updated when the isocenter position is modified.
iv) Should be possible to highlight or suppress different density region in the DRR.
vi) Macro function to save a used steps
vii) Specify DRR image enhancement tools to improve DRR quality.
viii) Reconstruction of DRR should be real time or in sub seconds.
ix) Direct printing of DRR on laser film should be possible.
x) Real time display of DRR as beam parameter changes.
A-24
DEPTH CONTROL :
i. System should support depth control mode creating a DRR from slab of 3-D
mode, perpendicular to beam axis.
ii) DRR must be calculated over a user defined thickness.
iii) Depth control in oblique projection must be possible.
iv) Should be possible to merge two DRR image on the same beam.
v) Cross hair display on DRR to provide scale information.
A-25
DATA IMPORT / EXPORT
i) System should be able to export image, volume and plan data in DICOM 3.0
standard long with all Radiotherapy specific data and private objects, DICOM RT
plans and data sets.
162
ii) System should be able to import DICOM RT data to the linear accelerator of
any vendor.
iii) CT simulation system should be fully integrated with the existing TPS. The
vendor should inspect and will be responsible for complete integration.
iv) All import and export license should be provided.
A-26
DOCUMENTATION AND ARCHIVING
i) Should be on a color dye sublimation or alternative suitable and economic printer
to be supplied along with the system and DICOM print should be possible. Abode
post script print should be available.
ii) Archiving should be on DVD in DICOM format.
A-27
MEASUREMENT PACKAGE :
i) The software should provide the density value (in House field unit) of a
particular point on image. It should compute distance along straight lines and
curved lines angle between the lines and radius of curvature for curves.
ii) For a specified region of interest, ROI, the area, minimum and maximum voxel
values mean and standard distribution and a density histogram should be available.
iii) The software should be able to calculate the volume of a displayed 3-D object.
A-28
IMAGE MANIPULATION
i) Different kinds of image manipulation features should be available like multi
planer reconstruction curved formatting.
ii) 3D reconstruction with no waiting for reprocessing.
iii) The vendor should provide comprehensive training by application specialist for
the CT simulator at the site on installation and to the full satisfaction of the head
163
department of radiotherapy. The training period should be at least for four weeks or
more.
2.1 Complete installation should include :
1. Room Planning and designing and construction. Space requirements to
be spelt out in advance.
5. Air conditioning and monitoring of temperature and relative humidity
and air changes (To specify no. per hour) to be installed.
2.2 The unit shall be capable of being stored continuously in ambient
temperature of 0-50 deg C and relative humidity of 15-90%.
2.3 The unit shall be capable of operating in ambient temperature of 20-30 deg.
C and relative humidity of less than 70%.
2.4 Shall meet IEC-60601-1-2:2001 (or equivalent BIS) General requirements
of safety for electromagnetic compatibility or should comply with
89/366/EEC; EMC-directive.
3. Power supply
3.1 Should work on three phase 400-440 V/50 Hz power
3.2 Online UPS of suitable rating should be supplied for the complete system
including Gantry, computer system, anesthesia delivery system, monitor
and defibrillators with at least 30 minutes back up.
3.3 Reset-table over current breaker shall be fitted for protection.
4.
Standards, Safety and Training
164
4.1 Warranty : 60 months from the date of satisfactory installation & handing
over to the department. The warranty shall cover all the accessories
including CT tube. Comprehensive maintenance contract for five years
shall cover all the accessories including CT tube.
4.2 Shall comply with AERB guidelines and type approved.
4.3 Should be FDA, CE, UL or BIS approved product.
5.
Documentation
5.1 User / Technical / Maintenance manuals to be supplied in English.
5.2 Certificate of calibration and inspection.
5.3 List of equipments available for providing calibration and routine.
Preventive maintenance support as per manufacture documentation in
service / technical manual.
5.4 List of important spare parts and accessories with their part number and
costing.
5.5 Log book with instruction for daily, weekly, monthly and quarterly
maintenance.
165
Department Microbiology
S.No.
1
Item Code
No.
MIB-01
Name of Equipment
Real Time PCR
Specification
Licensed for Clinical & Research application
The real time PCR must have at least 16 to 96 samples in one run
CE/IVD/FDA Compliant
Capable to excite and detect 4 or more spectral bands (4 or more
color multiplexing system)
Detectors PMT, Silicon photodiodes
The instrument must be factory calibrated to optimally detect the
following 4 fluorescent dyes simultaneously; FAM, Cy3, Texas Red,
Cy5 or FAM, TET, Texas Red, Cy5, for either Taqman, Beacon,
Scorpion, Amplifluor fluorescent probes. Additionally, the instrument
must be capable of melt-curve analysis when SYBR green
chemistries are being employed.
Heating Ramp Rates 6 - 10 Deg C
Company should provide following reagents
100 HIV real time PCR Kit
100 HBV real time PCR Kit
100 HCV real time PCR Kit
2
MIB-02
Fully automated blood
culture system
100 MTB real time PCR Kit
Fully automated technology with ability to take patient I.D. by barcode.
Should process blood samples, other sterile body fluids both aerobic and
anaerobic systems.
Sample capacity more than 200 samples.
Besides phylogenic, system should have facility of detection for yeasts and
166
Comp./Divt.
fastidious organisms
Should include pediatric and adult samples.
Media in bottles should have agents for neutralization of antibiotics.
Continuous agitation system.
Analyze each sample separately as per ID, time of entry, incubation period,
growth etc.
Should have built in calibration check and alarms/reminder for the same.
Decontamination facility.
High sensitivity and specificity with continuous monitoring of all samples.
Minimum 3 days stand alone data storage capabiligy.
All media and consumables for setting up and standardization should be
provided free of cost
Additional identifiction and sensitivity (with wide range of antibiotics) to be
provided with the equipment.
The unit shall be capable of being stored continuously in ambient temperature
of 0-50 deg C and relative humidity of 15-90%
The unit shall be capable of operating continuously in ambient temperature of
10-40 deb C and relative humidity of 15-90%
Power input to be 220-240VAC, 50Hz fitted with Indian plug,
Reset tabke iver cyrrebt breaker
Suitable voltage corrector/stabilizer
Suitable UPS with maintenance free batteries for minimum one-hour back-up
should be supplied with the system
Attach original manufactures produc catalogue and specification sheet
photocopy/Computer print and accepted. All techni al data to be supported
167
with original product data sheet . Please quote page number on compliance
sheet as well on technical bid corresponding to technical specifications.
Should be FDA or CE approved or ISI marked product.
Should be compliant to ISO 13485 : Quality systems-Medical devices
particular requirements for the application of ISO 9001 applicable to
manufactures and service providers that perform their own design activities.
Comprehensive training for lab staff and supppport services till familiarity
with the system.
3
MIB-03
Fluorescent Microscope
4
MIB-04
Trinocular Microscope
Three years warranty, 5 yrs comprehensive AMC should be abailable with
service centers in close proximity.
Trinocular head
6 positions nose piece.
Objectives- 5x, 10x, 40x, 100x(A Plan achromatic)
Halogen filament lamp 12 V, 35 W for fluorescence 50 W
Binocular Phototube
Conversion filters-blue & green, CB-12 d32x2.
Condenser 0.9/1.25H
Phase stop pH 1,2, 3
Pin hole diaphragm
Eye piece 2 pairs WF 10x & WF 15x
Eye piece eye cup
Dust over
Ergonomic design to provide user comfort and avoid eye fatigue. Comfortable
knee rest position.
Power slot G2
With computers compatible accessories.
Mega fixed CCD, 3x zoom,Digital zoom
LCD & optical view finder
USB interface for Windows
Remote control via USB or control unit
Line image via USB or video out. 4
System complete with illumination system is required.
Body -Trinocular, sturdy, stable base body with focus adjustment
control.
168
Eyepiece- Trinocular high quality, achromatic, widefield, 10x with
inbuilt pointer. The eyepiecess should be aplanatic and have a
minimum field number of 18. Diopter adjustment must be present.
Objective - Three objectives 10x, 40x, 100x
All Objectives should be Spring loaded type, wide field, achromatic
and parfocal. 10x and 40x objectives should have numerical
apertures of 0.25 and 0.65 respectively.
100x should have numerical aperture of and should be of oil
immersion type.
Nose piece - Revolving nose piece to accommodate of three
objectives with click stops. It should be provided with ribbed grip for
easy rotation mounted on a precision ball bearing mechanism.
Stage - Uniformly horizontal mechanical stage with fine vernier
graduations. Should be provided with slide holder. It should be
designed with convenient sub stage vertical coaxial adjustment for
slide manipulation.
Stage Condenser - Abbetype condenser, Numerical apperature 1.25
focusable with rack and pinion arrangement incorporating as
aspherical lens and an irisdiaphragm.
Sub-stage illuminator - The system should have build in variable
light source 20 W, 6 V halogen lamp.
All optical parts including objectives, eye pieces and prism should
have anti-reflective coating and antifungal property
2. All metallic part should be corrosion-proof, acid-proof and stainproof.
169
Working manual should be provided with each microscope.
One no. of anti static cleaning brush should be provided with each
Microscope for cleaning purpose.
5
MIB-05
Horizontal Laminar flow
6
MIB-06
Electrophoresis complete
set
Size: 4’ x 2’ x 2’ size of Hepa filter —4’ x 2’ x 6’
- Stainless steel top, transparent front door (5mm size)
- Unit fitted with prefilter & one 2 x 40 W HEPA filter (0.03 Micron
size)
- Fluorescent illumination.
- Built in germicidal UV light
- Cock for gas
- Height of working table should be comfortable In ‘Sit down’
working position for the operator.
- Recessed knee space
Mini-plus horizontal gel unit with removable casting tray and 2 x 1
mm thick, 16- sample combs and coloured loading strips
Technical Specification
Unit Dimensions (Wx L x H) - 16.5 x 23 x 6.5 cm
Gel Dimension (W x L) - 10 x 11.5 cm
Buffer Volume - 450 ml
Maximum Sample Capacity - 80
Combs - 2
Comb Thickness - 1, 1.5 or 2 mm
Comb Throughput - 4 to 20 samples
Comb Slots - 4
Migration Distance Between Comb slots - 2.5 cm
Recommended Running Voltage - 75 to 125 V
Power Output Connectors (diameter) - Shrouded, 4mm
170
NAME OF DEPARTMENT:- ENT
1.
ENT-01
Operating microscope
Required 2 in number Technical data:
Tubes, Eyepieces - straight binocular tube, f = 170 mm.
- Option suitable binocular tube f = 170 mm.
- 10x or 12.5 x wide field eye pieces.
Objective lenses - Different focal lengths from f = 200 mm to f = 400 mm,
grade in steps of 50 mm.
Magnification - Manual, 5 step magnification changer, magnification factor Y =
4x - 2.5x.
Focusing - using the focus adjusting knob, focusing range : 40 mm.
Illumination - coaxial illumination, supply by light guide.
- 2x12 v, 100 w halogen reflector lamp.
- spare lamp with quick action lamp changer.
Maximum load in suspension arm - 2.5 to 7.0 kg (complete microscope
equipment including accessories and coupling).
Rated voltage
171
- 115 VAC (100....120 VAC +/- 10%)
- 230 VAC (220....240 VAC +/- 10%)
Power consumption - 115 VAC max. 2.0 A
- 230 VAC max. 1.0 A
Rated frequency - 50-60 Hz.
Fuses - fuse link - 115V - T 6.3 A/h 250 V
230V - T 3.15 A/h 250 V
Electrical standard - complying with IEC 601-1/EN 60 601-1/UI 2601-1;
CAN/CSA-C22.12 no 601.1 protection class 1, tube B equipment with beam
splitter, TV camera, adaptor CCD color TV camera.
2.
ENT-02
Flexible fiber optic
Laryngobroncoscope
with suction canula
Required 1 in number.
Field of Vision 120*.
Outer diameter 4.9 mm.
Diopter +2 - 8 Dptr.
Depth of field 3-50 mm.
Diameter of instrument channel 2.2 mm.
Tip deflection :
Up.........................180*
172
Down.......................130*
Total length 580 mm.
Working length 300 mm.
Fiber optic cable with LH 150 light source.
Monitor with all accessories.
3.
ENT-03
Biopsy Forceps
Alligator type.
Ellipsoidal.
Other forceps and all accessories to remove foreign body.
4.
ENT-04
Fiber optic source
Required 1 in number
Halogen bulb with mirror 15v, 150W,
size 186(w)x151(h)x270(d).
5.
ENT-05
Micro laryngeal
forceps
Required 2 each.
Instrument:
1. Micro laryngeal forceps serrated jaw 25 cm, 35 cm.
2. Micro laryngeal forceps serrated jaw left 25 cm.
3. Micro laryngeal forceps serrated jaw right 25 cm.
173
4. Micro laryngeal forceps serrated jaw upward 25 cm.
5. Micro laryngeal forceps serrated cup jaw straight 25 cm.
6. Micro laryngeal forceps serrated jaw left, right and upward 25 cm.
7. Micro laryngeal scissor straight, left, right and upward 25 cm.
8. JACKSON grasping forceps 25, 35, 45, 55 cm.
9. Foreign body forceps 25, 35, 45, 55 cm.
10. PATTERSON biopsy forceps 25, 35, 45, 55 cm.
11. Biopsy cup forceps 25, 35, 45, 55 cm.
12. Biopsy punched forceps 25, 35, 45, 55 cm.
13. JACKSON foreign body forceps 25, 35, 45, 55 cm.
14. JACSON alligator forceps 25, 35, 45, 55 cm.
6.
ENT-06
Pure ton audiometer
Required 1 in number
Digital with air bone and speech audiometery.
SISI.
Pure pulse with variable tones, stinger.
ABLB.
174
SAL test with printer.
Portable.
7.
ENT-07
Impedance
Audiometer
Required 1 in number
Technical data:
1.
Tympanomatry mode
Prob frequency, intensity - 226 Hz = /-1%, 85 db spl into cm3.
High frequency - 678 hz/800 hz/1000 hz.
Presser range - +300 to 600 dapa.
Volume range - 1 to 6 ml.
Accuracy +/- 5% or +/- 10 dapa.
Test time <3 second.
2.
Reflex mode
Test frequency - 500, 1000, 2000, 4000, hz +/-2%.
Noise stimuli - WN/HP/LP.
Test method - Ipsilateral, contralateral.
175
Intensities ipsilateral - 70...........105 db HL.
Intensities contralateral - 70.........110 db HL with button contra phone.
- 70.........120 db HL eith TDH 39 contra phone.
Ipsilateral reflex text - with AGC.
Intensity setting - automatic or manual.
3.
Reflex decay mode.
Test time - 13 sec, 10 sec, auto tone present,
4.
Eustachian tube mode.
Pressure range +400 to -400 dapa.
5.
8.
ENT-08
Oto Acoustic Emissions
With printer, and portable.
Required 1 in number.
Interacoustic Oto Acoustic emission Model, DPOAE along with Thermal
Printer.
9.
ENT-09
BERA
Required 1 in number
Technical data:
Output data:
1.
Frequency range Air conduction:250 Hz (90 dB), 500 Hz (120 dB), 750 Hz
176
(120 dB), 1 kHz (120 dB), 1.5 kHz (120 dB), 2 kHz (120 dB), 3 kHz (120
dB). 4 kHz (120 dB), 6 kHz (110 dB), 8 kHz (110 dB).
2.
Frequency range Bone conduction:250 Hz (50 dB), 500 Hz (60 dB), 750 Hz
(60 dB), 1 kHz (60 dB), 1.5 kHz (60 dB), 2 kHz (60 dB), 3 kHz (60 dB). 4 kHz
(60 dB), 6 kHz (60 dB).
3.
Frequency Accuracy : < 3%.
4.
THD + N : < 3%.
5.
HL accuracy : within 2dB.
6.
O/p level step size : 5 dB.
7.
Attenuator accuracy : within 1 dB.
8.
Tone present : pulse & continuous.
9.
Masking : wide band.
10. Live speech : 2 x microphone inputs.
11. Level indicator : monitors live speech.
12. PC interface : with RS 232 port.
13. Display : 1 line of 16 characters.
14. Power : 90-270 Volts (50-60 Hz).
177
Software : Program details in CD.
Dimensions : Length : 225 mm
Width : 165 mm.
Height : 40 mm.
Weight : Absolutely light weight as compared to other brands almost only 800
Grams.
Memory : Depending upon hard disk capacity of PC.
10.
ENT-10
Sinus Endoscopes
Required 1 each in number
Hopkins rods, Storz/Hawks with accessories for the same 4 mm, 45o, 75o.
2.8 mm, 0o, 30o.
11.
12.
ENT-11
ENT-12
Electric Cautery with
all accessories
Micromotor Drill
Required 1 each in number
1.
Heating voltage : 0-3 V (no load).
2.
Heating current : 5.5 A - 13.5 A.
3.
Spotlight Voltage : 0-2.5 V.
4.
Supply Voltage : 220/110, 50 Hz.
5.
Power Consumption : 80 W.
Required 1 in number
178
With hand piece.
Korean/Japnese 40,000 rpm.
13.
ENT-13
Shea Microcar Surgery
Required 1 Set
(Set of 11 instrument)
14.
ENT-14
15
ENT-15
Head Miror
Bipolar RadioFrequency Ablation
system for ENT
Treatment with auto
stop function
20 Nos
- Should be based on the principle of Radiofrequency induced Thermotherapy
for minimal invasive surgeries.
- Should be interstitial form of terapy which can be performed under local
anaeshtesia. Surface of the organ should remain intact.
- Current should be induced through bipolar applicatiors. Should not need any
neutral elecctrodes.
-Tissue should be heated over 60 deg.C
-Should provide a rapid procedure.
-Should have constant real-time monitoring of the coagulation process.
-Should provide end-of-procedure singal.
-Should have automated power contral to exclude overdosing.
-Should have footswitch control.
-Should be supplied with bipolar cutting system for the consevative removal of
tissue and with special surgical forceps, a cutting electrode grip, the necessary
connection cables and special cutting electrodes for combined treatment of
sleeprelated breathing disordes.
-Should be compact unit and should be supplied with different applicators and
probes.
-Should be certified acc.to CE and IEC601.10 safety standards.
179
Consumables
--Probes for treatment of Habitual snoring &Hyperplastic palatine tonsils in
adults and children with conical tip & 1.3mm dia
-Probes for treatment of Hyperplasia of the nasal concha, Habitual snoring
(combined treatment) and Mild obstructive sleep apnea (combined
treatment)with conical tip & 1.1mm dia.
-Brobes for treatment of Nasal polyps, especially recurrent polyps with conical
tip; and 1.3mm dia.
- Angled and bayonet Forceps with cables for tissue and vessel coagulation to
stop bleeding in ENT and surgery.NAME OF DEPARTMENT: PATHOLOGY
S.No.
1.
Item Code
PAT-01
Name of Equipment/Instrument
Laboratory CENTRIFUGE
Specification
1.
Table top model with swing out rotor head 16
tubes of
15 ml. glass tubes.
2.
Digital speed indicator with 60 min. Count down
timer.
3.
Speed 4000 rpm & RCF 2750 with rotor head.
4.
Dynamic breaks, Imbalance detector, cut-off in
case of
uneven load.
5.
Step less speed regulator & safety lid interlock to
prevent lid opening during operation.
6.
220-240 volts. 50 Hz.
180
2.
PAT-02
Laboratory CENTRIFUGE (Research)
1.
Table top model with swing out rotor head 16 tubes
2.
15 ml. glass tubes.
Digital speed indicator with 60 min. Count down
of
timer.
3.
4.
case of
5.
6.
7.
8.
3.
PAT-03
1.
2.
Centrifuge for Micro-hematocrit
3.
Speed 4500 rpm & RCF 3485 with rotor head.
Dynamic breaks, Imbalance detector, cut-off in
uneven load.
Brushless induction motor with frequency drive.
Step less speed regulator & safety lid interlock to
prevent lid opening during operation.
7 segment LED display of speed.
220-240 volts. 50 Hz.
Centrifuge for Micro-hematocrit.
Table top model with rotor head to accommodate
24 capillaries with Reading device.
Digital speed indicator with 15 min. Count down
timer.
4.
5.
6.
case of
7.
8.
181
Speed 12000 rpm & RCF 15300 with rotor head.
Switch to quick accelerate to full speed.
Dynamic brakes, Imbalance detector, cut-off in
uneven load.
Brushless induction motor with frequency drive.
Step less speed regulator & safety lid interlock to
9.
10.
11.
4.
PAT-04
Deep Freezer (-20 o C) Horizontal
1.
2.
3.
stainless
prevent lid opening during operation.
7 segment LED display of speed.
Automatic door opening through gas hinges.
220-240 volts. 50 Hz.
Capacity 170 litres & Required Temperature
lowest 20oC
Outer body made of powder coated steel.
Inner chamber Non-corrosive, non-magnetic
4.
5.
steel 304 AISI grade.
PUF insulation between inner and outer chamber.
High tech solid state digital Temperature indicator
6.
7.
controller.
Unit to be supplied with Voltage stabilizer.
Dimensions outer: mm 1150(W)x500(D)x910(H)
cum
Inner :
600(W)x400(D)x700(H)
5.
PAT-05
Blood
Bank
Centrifuge
component separation
1.
2.
for
3.
4.
182
Unit suitable for high load blood processing centre.
Required Swing out rotor head to accommodate 4
double bags or 6 single bags.
Should have advance microprocessor control.
Inbuilt pre-cooling programme, self diagnosis of
errors, option to set and indicate RCF.
5.
6.
7.
8.
9.
10.
6.
PAT-06
1.
Rotary MICROTOME (Spencer type)
2.
3.
4.
5.
6.
7
PAT-07
1.
2.
Cytospin for Cytology
3.
4.
183
Should have features of acceleration and
deceleration profile.
Imbalance detector & cut off in case of uneven
load.
Brushless induction motor with frequency motor.
Temper proof password protection, safety lid.
Simultaneous display of set and run parameters.
Max Speed 4500 rpm & max RCF 6000.0
Manual Rotary microtome with knife holder and
specimen holder and all accessories.
With imported heavy duty knives 200 & 240 mm
Range of thickness 0.5 um to 60 um, increment 1
um to 10 um.
Horizontal advance of specimen 30mm and vertical
stroke 60mm.
Universal knife holder base for different knives
along with disposable knife holder with safety
finger protection guard.
Maximum specimen size 50 x 60 x 40 mm.
Suitable for cytology preparations.
Swing out rotors with adaptor all tube sizes down
to 1.5 to 2mm.
Maximum Speed 6000 RPM with RCF 4186 g.
Capacity 12x15mm.
8
PAT-08
1.
Automatic Tissue Processor
2.
3.
4.
5.
6.
9
PAT-09
1.
Bone Decalcifier Digital
2.
3.
4.
10
PAT-10
Fully
Motorized
1.
Programmable
184
Fully automatic tissue processor with capacity of
200 cassettes per run.
LCD display with 4 lines, Digital programming up to
9 programmes. All controls should be operated by
feather touch keys.
Should have 12 heated stations with (3 wax baths)
with cover.
2 litre glass jars with fume hood with continuous
agitation.
Programmable 12 stage timing sequence for each
stage for duration 1 min to 9 hrs. in steps of one
minute with delay time up to 99 hrs.
Automatic wax bath (PID temperature controller
and PT 1000 sensors). With facility of Vacuum
operation and Protection hood.
Suitable for use in histology for decalcification of
bone tissue by electrolytic action.
Through the combination of heat and fluid
agitation.
Basket movement provided by an electric motor to
raise and lower the basket as well as rotate it.
Digital temperature control and display along with
timer.
Fully Automatic Microtome for variable specimen
Rotary Microtome.
2.
3.
4.
5.
6.
retraction and sectioning.
Two separate programmes for trimming and
sectioning.
Speed control through cutting window.
Section thickness setting from 1um to 99um in 1
um increments.
Section thickness from 0.5um to 99um.
Three Sectioning modes - one manual and two
motorized (continuous and separate).
11
PAT-11
Slide warming table
1.
2.
3.
4.
Rectangular histology slide warming table.
With jet black top surface minimum 300 x 200mm.
Programmed and set temperature digital display.
Set values memory.
12
PAT-12
Knife Sharpener Automatic
1.
Automatic Knife Sharpener A.O. Spencer Type for
Manual knives.
To permit perfect cutting edge at an equal bevel
2.
angle
5.
on both sides.
Constant rotation of ground glass plate.
Can hold Knife up to 300mm and should have
metal scale 0-25o with 1o divisions.
Unit should be powder coated.
1.
Specially designed equipment to dispense wax
3.
4.
13
PAT-13
Paraffin dispensers Digital
185
2.
3.
14
PAT-14
1.
2.
Tissue floatation bath
3.
4.
15
PAT-15
1.
Table top Blood cell counter (Clay
adam type)
2.
16
PAT-16
1.
Micro-slide cabinet
2.
3.
4.
17
PAT-17
1.
Automated Immunoassay Analyzer
2.
186
for embedding.
Capacity 3 litres/5 litres.
Thermostatically controlled temp. With Tap having
Temp. Control at 56o.
Tissue flotation bath for histopathology.
Micro processor based digital temperature control
range ambient to 70 + 1.
Inner chamber rectangular, seamless (die pressed)
stainless steel with high grade insulation.
Size minimum 240 (L) x 150 (W) x 50 (D) mm.
5 keys for simple manual differential count with
computation including percentage.
Each unit counts 999 and last unit totalize different
cells with bell at 100.
Closed pack manner with vertical storage of
75x25mm glass slides.
Steel cabinet with powder coating, paint finish.
Movable drawer in slots with lockable door.
Capacity 10000 slides/30 drawers or 25000
slides/80 drawers
Bench top analyzer with Built in thermal printer
with facility for external printer.
Based on Enzyme linked fluorescent assay.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
18
PAT-18
1.
Automated ELISA SYSTEM
2.
3.
System must have at least 12 sample testing
positions.
System should not have carry-over between
samples and reagents.
The test device for one test should contain all the
reagents required for that particular test.
System should be able to run, if required, a single
test at a time.
Calibration stability should be minimum 14 days.
Controls and calibrators should be included in the
test kit.
All the kit components should be stable up to
expiry date of the kit.
The test menu should be more than 80
parameters.
No consumables required for daily start up, shut
downs and periodic maintenances.
The test device should be bar-coded.
Should be CE Approved Fully Automated
continuous access, walk away Micro plate System.
Sample capacity at least 180/Batch
Individual racks for sample loading (at least 12) should be
provided.
4. Multi tasking system with simultaneous functioning of
187
different processing steps.
5. System should have at least 4 micro plate at a time & 3
micro plates in archiving .
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
188
Up to 12 parameters per batch.
System should have Clot detector.
Original kit vial loading facility (direct loading of
reagent vials irrespective of the manufacturer)
Singe probe system.
Should have Carbonized disposable tips for reagent
dispensing & sample dispensing.
System should have at least 280 positions for
primary tubes.
Should have automatic sample sensing & bar
coding.
Sample dilutions should be up to 10000
31 positions for reagents & 22 positions for
calibrators required.
Signature/simultaneous multi reagent pipetting to
ensure fast processing.
8 Channel washer manifold.
Should have Independent micro plate transporter.
System should be 96 well Plate Reader with both
bichromaticad monochromatic reading options.
At least 8 independent incubators with temp
options from RT to 47oC.
20.
21.
22.
23.
24.
25.
26.
27.
19
PAT-19
1.
Thalassemia and Hemoglobinopathy
testing/screening equipment
2.
3.
4.
5.
189
Should have a Bi-directional interface.
Start up time should be less than 2 minutes.
Option for performing individual modular functions
e.g. washing, reading, incubation and sample
addition.
Windows based operating system.
24 Hrs. service support.
Should enclose list of installations in India.
1 year warranty and 5 years spare parts availability.
The company quoted should be direct importer of
the system.
The system should be an Automated, Integrated
system, dedicated to HbA1c, Thalassaemia and
hemoglobinopathy testing and screening based on
HPLC technology.
The system should be able to screen and
quantitative hemoglobins Hb, A2, HbA, Hb, F and
Hb Al, Hb, S, Hb, C, Hb Q-India and other rare
abnormal hemoglobin.
Complete ready to use kit should be provided with
Buffers, Columns, primers, calibrators and sample
vials.
It should at least have a throughout of <7 minutes
per sample.
The system should have in-kit external standards
6.
7.
8.
9.
10.
11.
12.
13.
14.
190
for instrument calibration ensuring accurate
quantitation of results.
The system should contain Low pulsation dual
piston pump with programmable solvent delivery
system.
The system should have Integrated 1/4 LCD touch
screen.
The system should have built in Graphic thermal
paper printer, 112 mm, 4.4" wide.
The system should have a bi-directional LIS.
The system should have an audible alarm system
for low buffer in the mobile phase reservoirs, low
level value for cartridge injection and overflow for
the waste tank, as well as built in alarms for
calibration failure.
The system should be capable of positive sample
identification using a Barcode reader.
The system should have the facility of primary tube
sampling and direct dilution of the samples
without manual intervention.
It should have an inbuilt system check facility
which checks all the system parameters (e.g.
cartridge, buffer, reagent, waste etc.) are ready
before the sample analysis.
The system should have a dual program mode to
perform either Hba1c or Hba2/Hb F/Hba1c without
15.
16.
17.
18.
19.
20.
21.
22.
23.
191
changing any reagents or columns.
Assay time should be maximum 3 minutes for
HbA1c testing and maximum 7 minutes for
A2/F/A1c testing.
It should be able to print a hard copy report filing
identification and information on the subtype and
quantity for haemoglobin detected. It should have
the facility to view current and stored
chromatograms & should enable storage of
chromatograms.
It should have a remote data access feature when
connected to LAN or intranet.
Manual and explanatory supplementary reference
reading material on abnormal haemoglobin
variants should be provided with reference to the
system.
Normal and abnormal controls and quality control
controls should be provided.
The system should have a hardware upgrade
available for an increase in the sample workload.
Product related technical support, instrument
service and maintenance support should be
provided.
Installations list in India to be enclosed.
The instrument should be supplied complete with
a starter pack consisting of all reagents and
consumable for 400 HbA1c tests or 200 Hb
A2/F/A1c tests.
20
PAT-20
1.
5-Part Haematology Analyser
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
192
Fully Automatic and compact haematology
analyzer,
5-part differentiation of WBC.
Open vial sampling mode requiring maximum 20ul
blood.
23+4 parameters including RDW-SD.
Throughput: at least 60 samples/hour.
At least 4 quality control programs and 60 files
storage.
Storage Capacity: 40,000 samples with data and
graph.
Technology: Laser scatter, Flow cytometry,
Impedance.
Should have facility to analyse CBC, CBC + Diff
mode.
Fully customized report formats including
microscopic exam results.
Automatic diluent dispensing for capillary samples.
Should have syringe based measurement
technology.
Linearity range Performance.
WBC : 0-99.99 x 109/L
RBC : 0 - 8.00 x 1012/L
13.
14.
21
PAT-21
1.
HGB : 0-250 g/L
HCT : 0-67%
PLT : 0-1000
Reproducibility performance
WBC : < 2.0%
RBC : < 1.5%
HGB : < 1.5%
MCV : < 1.0%
PLT : < 4.0%
There must be PC operation of the instrument.
Optical system : Universal infinity corrected optical
system, anti fungus.
2.
Nosepiece: Revolving nosepiece.
3.
Coarse/fine focusing knob.
4.
Stage: Mechanical fixed stage (120x132mm) with
specimen holder.
5.
Eyepiece tube: binocular tube (30 degree
inclination
and 48-75mm IPD)
6.
Condenser: Abbe condenser with objective guide
marking position. Factory fitted.
Numerical Aperture: 1.25.
7.
Eyepiece lens : 10x (anti-fungus), factory-fitted.
8.
Objectives :
a.
Plan Achromat 4x
b.
Plan Achromat 10x
Binocular LED Microscope
193
9.
22
PAT-22
1.
Imported Binocular Research
Microscope
2.
3.
4.
5.
6.
7.
8.
9.
10.
23
PAT-23
Research microscope with Epifluorescence
attachment
with
microscopic digital camera
•
•
•
194
c.
Plan Achromat 40x
d.
Plan Achromat 100x
Illumination : LED illumination source Voltage :
100-240 Volts AC
Optical system: Universal infinity corrected optical
system, anti fungus.
Nosepiece: Revolving nosepiece.
Coarse/fine focusing knob.
Stage: Mechanical fixed stage (120x132mm) with
specimen holder.
Eyepiece tube: binocular tube (30 degree
inclination and 48-75mm IPD) Rotable 360
Condenser : Abbe condenser with objective guide
marking position. Factory fitted. Numerical
Aperture : 1.25.
Eyepiece lens : 10x (anti-fungus), factory-fitted.
Objectives :
a.
Plan Achromat 4x
b.
Plan Achromat 10x
c.
Plan Achromat 40x
d.
Plan Achromat 100x
Illumination : Halogen 12/20W illumination source
Voltage : 100-240 Volts AC
Colour corrected infinite optical system, Anti
fungus.
Microscope stand with coaxial focusing control
knobs, upper stage drive stop.
Siedentopf type binocular/trinoccular eyepiece tube
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
195
30 o rotatable 360.
wide field eye piece 10x/18mm with rubber shield
(pair)
Quintuple rovolving nose piece with click stop.
Objectives o CCIS plan achromatic PL 4/NA0.13
o CCIS plan achromatic phase Ph 10/NA0.25
o CCIS plan achromatic Phase Ph 40/NA0.65
spring loaded
o CCIS plan achromatic Phase Ph 100/NA0.1.25
spring loaded
Phase contrast 5 position Turret Condensor for
phase 10x,40x100x,BF&DF
Centering telescope
Sub-stage Illuminator 6v/30w helogen lamp. Power
supply 100-240, CE
Epi-flourscent Attachment with filter cassette.
Lamp house HBO 100W, Collector Lens
Mercury Lamp socket for HBO 100 W, Starter unit
HBO 100W.
Lamp centering tool.
mercury lamp HG 100W
High resolution Digital camera with 1/2" CMOP
chip.
+USB 2.0 PC connection
Real time live image resolution 5.0 mega pixel.
,2580x1944 pixel.
16mm lens, Macro viewing tube, Calibration slide.
Microscope eyepieces adaptors (28mm, 30mm,
34mm, 35mm)
Image soft ware :: instant image capturing, real time
full screen image, programmed interval capturing,
video capturing, All measurements in micro., inch,
mm, length, angle etc.
•
Faqcility for on line file sending.
•
Image assembly at high magnification.
•
Image capturing at multi focal depths.
Branded PC computor : Pentium 1 Core Chipset with 4 GB
rams 300 GB HDD, DVD writer with Graphic card and High
Resolution 19" TFT Monitor with Key Board and Mouse.
24
PAT-24
RESEARCH
PENTAHEAD
MICROSCOPE Optical system :
Focus :
Infinity corrected system
Vertical stage movement 25mm per
coarse
Stroke, Vertical stage movement 1
micron
per fine stroke, Stage rotation of 27
degrees
Illuminator :
Built-in-Koehler illuminationfor
transmitted
Light 12V100W halogen bulb (precentered)
Light Intensity adjustment centrally
located
so both hand Can be used to increase
and
196
decrease light Light preset switch for
photography Built-in-filters (LBD-IF, ND6,
ND25)
Revolving Nosepiece :
Interchangeable reversed Coded
Quintuple/Sextuple Nose piece with click
stop.
Plan 4X, Plan Achromat Phase
10x/0.25WD 10.6, Plan Achromat
20X/0.4 WD 1.2 (spring) Plan Flourite
phase objective 40X/0.75 (spring loaded)
WD 0.51 & Plan Semi Apochromat
100X0
Wide field Trinocular head with Field no
22mm. Stage : Ceramic - coated coaxial
stage with right hand low drive.
Phase contrast/Darkfield condenser (N.A
Objectives :
Observation Tube :
Control Condenser :
1.1)
Teaching Attachment :
For 1+4 persons
Head with eyepiece of Field no. 22
LED arrow pointer (Green and Red)
Fluorescence Attachment :
*
*
*
Eight position Coded Filter Unit with Fly eye lens for even
fluorescence illumination.
100W Mercury Apochromatic Light illuminator
Filters should be Narrow band UV, Blue and Green.
Digital Camera :
Cooled Colour C-Mount CCD camera having
large CCD size of 1/1.8", with 12 bit A/D
converter having 3.0 Mpix or more resolutions.
197
Camera should have pixel size of 3.45 um2. It
should have Frame rate of 17 frames/second at
2080x1542 resolutions. Exposure time should
be 30us-180s. Digital Camera should be suitable
for bright-field & fluorescence applications.
Imaging System : Image analysis Software for Measurements Time
lapse And the software should be capable to drive
The camera and the microscope parts with latest
Branded Pentium 1 Core Chipset with 4 GB rams
300
GB HDD DVD writer with Graphic card and High
Resolution 19" TFT Monitor with Key Board and
Mouse.
* LCD Display for Live Presentation.
* Appropriate table for microscope.
25
PAT-25
Vacuum Infiltration tissue Processor
At least 9 Processing Programme with cleaning programme
and warm water flush programme.
198
-
Solution vol. upto 4 litres.
-
Control panel with easy monitoring & functionality.
-
Pressure/Selectable.
-
Vaccum agitation.
-
Should be supplied complete with all accessories,
reagent bottle with attachments.
26
PAT-25
ELEVATED GROSS STATION
INFRARED CONTROLS
-
Water reservoir & carbon filter.
-
Cassette Basket
-
Paraffin Container
-
Scraper
-
Aspirated carbon carbidge
WITH With Gross Tool system, Grossing Board and instruments for Grossing
and trimming.
Constructed from high quality stainless steel, elevated
grossing station, floor model.
Should have facility for :
o Camera mount
o Cassette Holder
o Disposal, 3/4 HP (Factory Mount) and 1 HP
(factory mount)
o Dissecting Board
o Eyewash Assembly
o Filter
Activated
Carbon
and
Potassium
Permanganate
o Flammable Storage Cabinet
o Foot Pedal control Voice activation
o Formalin Dispense/collection system
o Forms Holder
o Full Perimeter rinse
o Glove Box Holder
o Magnifier Light, Deck Mount
o Microphone on Flex Arm
o Monitor and keyboard stand
o Rule
199
o
o
o
o
o
o
o
o
o
o
o
o
o
Scale-Digital
Seismic Anchoring Kit
Shelving/cabinets-Stainless steel
Side Splashes, Splash Shield and Plexiglas
Trash Container (ventilated)
Utility Drawer
Valve air and gas
self contained Ventilation assembly
Video camera arm
Video or dictation mount
Voice activated dictation
Writing Platform (preferably Pull-out)/viewing
device
X-ray illuminator
THE BID SHOULD INCLUDE QUOTATION FOR (A) IMPORTED GROSSING TOOLS :
Standerdised Grossing tools eg Trimming Knives, Grossing
forks, Semi disposable autopsy knives, dissecting scalpel
and replaceable blade scissors. Should be easy to clean and
decontaminate.
(B) IMPORTED GROSSING BOARD :
- Not less then 50x40x2.5 cm size along with grossing forks
1.5, 2, 2.5mm
- Cleaning Brush
- Easily adjustable wells, calibration of wells position of
tissue and desirable thickness
27
PAT-27
CRYOSTAT
Cryo 220V, 50/60 Hz with disinfection system and motorized.
Instrument used to freeze and section tissue specimen
With all necessary accessories
Chamber Temperature range - 35oC to 0oC
Cryobar Temperature - 50oC minimum (Cryo + Section)
200
-
-
28
PAT-28
CONTINUOUS
RAPID
TISSUE PROCESSOR (Microwave Based)
201
Sectioning Speed Range
o Maximum : 28 Sections per minute
o Minimum : 2 sections per minute
o Specimen Size Round 25, 38 and 55mm
o Specimen orientation 8o to 10o (x and Y axis)
360o (z Axis)
o Sectioning range 1 to 99 u in 1 u increments.
Travel Range
o Vertical 63mm
o Horizontal 31.75mm
Upto 120 specimens per hour
Should be complete in respect of :
o Load station
o Microwave station
o Vacuum station
o Unload station
o Continuous loading and unloading should be
possible
o Maximum : 28 Sections per minute
o Minimum : 2 sections per minute
o Specimen Size Round 25, 38 and 55mm
o Specimen orientation 8o to 10o (x and Y axis)
360o (z Axis)
o Sectioning range 1 to 99 u in 1 u increments.
o Processing time ranging from 60 to 120 min
o Maximum : 28 Sections per minute
o Minimum : 2 sections per minute
o Specimen Size Round 25, 38 and 55mm
o Specimen orientation 8o to 10o (x and Y axis)
360o (z Axis)
o Sectioning range 1 to 99 u in 1 u increments.
Temperature ranges
o Microwave stations 61oC + 2oC
29
PAT-29
Automatic Micropipettes
1.
30
PAT-30
Coagulometer
2.
3.
4.
5.
6.
1.
31
PAT-31
Turbidometer
1.
2.
202
o Vacuum Stations 65oC + 2oC
o LCD Display with tough screen.
Complete software for manual and auto starts, should
be able to do standard or extended programs.
Reagent management system with counter for
cassette.
With high accuracy & Precision calibration at 20°C - 22°C
II. Fixed volume
a. 10 ml
b. 100 ml
4 set
c. 1000 ml
Delivery volume display in clear digits in readout window
Light weight eugenic design
Insulating Jacket with tip ejector
Autoclavable
Mechanically durable & chemically resistant
Semi automated haemostasis analyser
a. 4 channel optics
b. Low reagent volume 25 µl to 50 µl assay range 50 –
8.000ngm/ml
c. Can be used for clotting based chromogenic method
d. PC interface option
e. Should be provided with electronic pipette of 25 - 200
µl
f. Open system facility for reagents and automatic INR
calculations
g. Machine to be installed by the company personnel,
operational with all tests running
h. Starter kits to be provided
i. Training of operators
Semi automated analyser with end point, kinetic, fix time MSD
and absorbance modes.
90 open location for open MSD
3.
4.
5.
6.
7.
8.
203
Atleast has 6 programmes in MSD
Should have automated flagging of outline results
Measuring system with cuvette mode.
Filter range Biomatic filter, 340, 405, 505, 546, 578, 630
Temp - 37°C with temperature lock
Measuring range: -200 to +2000 O.D
NAME OF DEPARTMENT:- BLOOD BANK
1.
BB-01
Refrigerator
Bank
Blood 1. System required with weekly chart recorder and digital displays.
2. Temp range should have adjustable temperature control range from -1
degree to +8 degree C, factory preset at 4 degree C.
3. Capacity should accommodate 350 or more units blood and storage internal
volume should be 700 liters.
4. Refrigerator system:
a) The system should have high density CFC- free urethane foam insulation to
protect cabinet from ambient temperature fluctuation.
b) The system should have positive, forced, air circulation to maintain
temperature uniformity at all shelf level, with quick recovery +/- 1 degree C.
e) The system should have sensors for activating automatic defrost cycle to
minimize the frost build up.
f) The system should have automatic condensate removal with no
requirement for separate drainage lines.
5. Internal construction should be made up of high grade stainless steel (min
22 (i) External construction Corrosion resistant sheet at least 1 mm
thickness.
204
6. 5 Internal Temp Control:
a) System should have temperature control range from +1 degree C to + 8
degree C.
b) Temperature should resolution should be better than 0.1 degree C.
c) Cooling down time of max of 150 min on half load.
7. External ambient temp should perform in ambient temp up to +43 degree C.
8. Door system should lockable double glass for better safety.
9. Safety system:
a) system should have large and clear digital displays for the set/run
parameters.
b) the system should have weekly chart recorder temperature changes.
c) the system should have key operated set point for the added security.
10. Alarms:
a) system should have audible/visual warnings for over-temperature under
temperature and power failure with visual status reports on critical
functions.
b) system should have battery backup and connections for remote alarm
contacts.
205
11. Should have adjustments for uneven bases. The adjustments should be easy
to use like rotating a screw at the legs in the base.
12. Scratch resistant internal lining of the cabinet (stainless steel or aluminium).
2.
BB-02
Equipment
• The Sterile Connecting Device should be compatible with all standard tubing
for blood bags.
Specifications
for
Sterile
Connecting • Compatible with all standard tubing for blood bags.
• Compatible with all standard tubing for blood bags.
Device
• Should be possible to weld external diameter 3.9 to 4.5 mm and internal
diameter of 2.9 to 3.1 mms.
• Sensor controlled temperature welding,
• To be operational on 220 to 240 V at 50 Hz.
• Sterile Connecting Device - qty 1.
• The cost of Wafers may be ascertained during tendering, since it would be a
proprietary item, and not possible to quantify requirement initially.
• The unit shall be capable of operating continuously in ambient temperature
of 10-40 deg C and relative humidity of 15-90,
• The unit shall be capable of being stored continuously in ambient
temperature of 0-50 deg C and relative humidity of 15-90.
• Shall meet IEC-60601-1-2: 2001 (or Equivalent BIS) General Requirements of
Safety for Electromagnetic Compatibility.
• Power input- 270--MOV/ 50 Hz AC Single phase or 380-400V AC 50 Hz three
phase, fitted with appropriate Indian plugs and sockets.
• Resettable ovcrcurrent breaker shall be fitted for protection.
• Voltage corrector/stabiliser of appropriate ratings meeting ISI Specifications.
(Input 160.260 V and output 220-240 V at 50 Hz).
206
• Should be FDA, CE, LJL or BIS approved product.
• Electrical safety conforms to standards for electrical safety IEC- 60601/IS13450,
• Manufacturer should have ISO certification for quality standards.
• User manual in English.
• Service manual in English
• List of important spare parts and accessories, with their part numbers and
cost.
• Certificate of calibration and inspection from factory.
• Log book with instruction -or daily, weekly, monthly and quarterly
maintenance checklist.
• The job description of the hospital technician and company service engineer
should be clearly specified.
• List of Equipment available for providing calibration and routine
maintenance support as per manufacturer's documentation in service /
technical manual,
3.
BB-03
ID=GEL MICRO TYPING • System should be based on US-FDA approved gel particles.
• System should be based on "no washing antigloubuiln test principle."
SYSTEM
• Company should have quality control reagent like cross matching, grouping
and antibody screening.
• There should be provision to perform following procedures:
a) Grouping.
b) Cross matching.
c) Do test using IC method.
207
d) Blood grouping including partial D detection.
e) Rh confirmation.
f) Syphilis Antibody test.
g) Single Antigen test cards and antisera like Rh system (C.e.F.e.e.C) Kell,
Duffy,Levis, Lutheran MNS etc.
h) Special Antigen test cards for DCT positive patients that can detect IgG,
IgM, IGa,C3d, C3e, etc.
i) Special reagent for acid caution method.
4.
BB-04
• Add pack insert of all the products mentioned in 3.4.
• There shall be special blood grouping card for donors and patients to detect
partial RhD i.e. DVI variant to reduce risk of Allo immunization.
• There shall be commercial red cell panel i.e. 2 and 3 cell panel for antibody
screening and 11 cell panel for antibody identification. Further, should have
pooled 'O' cell with phenotype for donor screening as per NACO guideline.
• Body should be non metallic and non corrosive plastic to avoid corrosion
and electrical shock.
• Should have computer based automated data recording system with her
code security.
• Centrifuge and incubator should have a Plexiglas top for transparent viewing
of centrifugation cycle in centrifugal and incubation cards in inculcator.
• Centnfuge should provide 85g centrifugel force during centrifugation.
ELISA READER WITH Technical Specifications:
PRINTER
208
1.1 ELISA Reader complete with Printer is reacquired.
1.2 Should have 8-12 measuring channel & reference channel
1.3 Should have wave length range of 340- 750 nm 6 filler 340, 405. 450. 492,
540. 620nm with provision for filling any additional fillers
1.4 Should have .in absorption range of 0-4.000 A.
1.5 Should have 4 resolution of 0.001 A.
1.6 Should read within 0-8 seconds.
1.7 The control panel should have soft colored touch screen display, capable
of showing graph etc.
1.8 Should have external & internal programmable time & speed shaking.
1.9 Should be able to read all types of platese.
1.10 Should have a single halogen lamp with save features as light source.
1.11 Should have user defined programmes 30 or more.
1.12 RS 232/USB output for Printer. P'C connectivity and Data acquisition
should be there.
1.13 Should have data memory of 300 plates.
1.14 Should have external printer, capable of printing complete results &
graphs etc. from Elisa system
209
1.15 Accessories, spare and consumables:
1 Halogen 1amps : 2
2 Thermal print paper : 10 Rolls//Fold
3 Dust Cover - 01
4 Set of pipettes consisting of single channel variable volume color
prpetter 0.5-10 ul, 40-200 ul, 200-1000 ul.
5 8 channel variable volume color multi channel pipettes 5-50 ul and 50300 ul.
2 Environmental factors :
2.1 The unit shall be capable of being stored continuously in ambient
temperature of 0-50 deg C and relative humidity of 15-90%.
2.2 The unit shall be capable of' operating continuously in ambient
temperature or 10 -40 deg C and relative humidity of 15-90%.
3 Power Supply:
3.1 Power input to be 220-240VAC, 50 Hz fitted with Indian plug.
3.2 Resettable over current breaker shall be fitted for protection.
3.3 Voltage corrector/stabilizer of appropriate ratings meeting ISI
Specifications. (Input 160-260 V and output 220-240V and 50 Hz)
210
3.4 Suitable UPS with maintenance free batteries for minimum one-hour backup should be supplied with the system.
4. Standards and Safety:
4.1 Comprehensive training for lab staff and support services till familiarity
with the system.
4.2 Comprehensive warranty tor 3 ycars.
4.3 Should he compliant to ISO 13485: Quality systems - Medical devices Particular requirements for the application
of ISO 9001.
@
Applicable to manufactures and service providers their perform their own
design activities.
4.4 Should be FDA/VCE/UL approved product.
5. Documentation:
5.1 User/Technical/Maintenance manuals to be supplied in English.
5.2 Certificate of calibration and inspection from factory.
5.3 List. of Equipment available for providing calibration and routine
Preventive Maintenance Support, as per manufacturer documentation in
service/technical manual.
5.4 List of important spare parts and accessories with their part number and
211
costing.
5.5 Log hook with instruction for daily, weekly, monthly and quarterly
maintenance checklist.
The job description of the hospital technician and company service engineer
should he clearly spelt out.
5.
BB-05
AUTOMATIC MICRO
PLATE WASHE
2.1 Fully automate programmable micro plate washer with 8/12 manifold.
2.2
Then micro plate washer should offer the possibility of flexible,
programming of the desired washing procedures. It should have 1-4 liquid
channels.
2.3
It should be capable of storing up to 75 user defined washing
procedures.
2.4 The dispensing volume/ well should be 50-3000 ul.
2.5 Plate soaking be programmable at any point of the washing procedure.
2.6 Should have soak time of 1-999 sec.
2.7 Performance sequence should be either on whole plate "Plated Mode"
or strip by strip "Strip Mode".
2.8 It should offer the possibility to present physical parameters & well
shape (round or Hal bottom) of the used micro plate (up to 10) & store this
information under freely definable names.
212
2.9 Application aspiration should be performed at the edge of the well.
altering from one side to the other, or in the centre when using, round
bottom plates.
2.10 Residual volume/ well should be less than 2 ul.
2.11 The desired number of cycle as well as the interval lime between the
steps should be freely definable
2.12 Necessary sequence should be defined as a combination of single steps,
which are freely adjustable, be selling the corresponding parameter.
2.13 The result of the washing procedure may be intensified by an optional
wash cycle limited to the bottom area (bottom wash).
2.14 Aspiration should prevent an overflow of the well contents.
2.15 A variety of pre-programming procedures should cover majority of
standards application
2.10 This should be able to be used as - COOMBS WASHER" with vertical and
horizontal movements performed with 0.1 mm steps.
3 System Configuration Accessories, spares and consumables:
3.1 . System as specified4 Environmental factors:
4.1 The unit shall be capable of being stored continuously in ambient
213
temperature of 0-50 deg C and relative humidity of 15-90%.
4.2 The unit shall be capable of operating continuously in ambient
temperature of 10 -40 deg C and relative humidity of 15-90%.
5. Power Supply:
5.1 Power input to be 220-240 VAC. 5()I Hz fitted with Indian plug
5.2 Resettable over current breaker shall be fittcd for protection
5.3 Voltage corrector/stabilizer of appropriate ratings meeting ISI
Specifications (Input 160-260 V and output 220-240 V and '50 Hz).
5.4 Suitable UPS with maintenance free batteries for minimum one-hour
back-up should be supplied with the system.
6. Standard and Safety:
6.1 Should be FDA/CE/UL approved product.
6.2 Comprehensive warranty for 2 years.
6.3 Comprehensive training for lab staff support services till familiarity with
the system.
6.4 Electrical safety conforms to standards for electrical safely IEC-60601
/IS-13450.
Documentation:
214
7.1 Certificate of calibration and inspection from factory.
7.2 List of Equipments available for providing calibration and routine
Preventive Maintenance Support, as per* manufacturer documentation in
service/technical manual.
7.3 User/Technical/Maintenance manual to be supplied in English.
7.4 list of important spare parts and accessories with their part number and
costing.
6.
BB-06
'Blood Cell Washing
System
1 Technical Specifications:
1.1 It should be made of stable Roburt. All-Steel Cabinet.
1.1 Max. rpm:: 3.000 or more.
1.3 Max. KCT: KOO gm or more;
1.4 Max. Volume: 12-place stainless steel rotor for 12 mm X 75 min or 10 mm
X 75 nun
1.5 Drive Unit should be Three-speed brushless induction motor, with sealed,
Lubricated bearings.
l.6 Should have Sensor-touch control billions with digital LED display.
1,7 Should have safety Indication of disorders by self diagnosis program.
1.8
Should Display the Number of wash cycles and Time selected, Saline
215
level Lid latch and have Alarm at end of run.
1.9 Indication of digital selectable from 1 to 4 wash cycles.
1.10 All consumables required for installation and standardization of system
to be given free of cost.
2. Environmental factors:
2.1 The unit shall be capable of being stored continuously in ambient
temperature of 0-50 deg C and relative humidity of 15-90%.
2.2 The unit shall be capable of operating continuously in ambient
temperature of 10-40 deg C and relative humidity of 15-90%.
3. Power Supply:
3.1 Power input to be 220-240 VAC, 50 Hz fitted with Indian plug.
3.2 Resettable over current breaker shall be fitted for protection.
3.3 Voltage corrector/stabilizer of appropriate ratings meeting ISI
Specifications (Input 160-240 V and Output 220-240 V and 50 Hz).
3.4 Suitable UPS with maintenance free batteries for minimum one-hour
back-up should he supplied with the system.
4. Standard and safety:
4.1 The automated cell cashing system should ensure precise cell washing in
216
compliance with AABB guidelines.
4.2 Should be FDA/VCE/UL approved product.
4.3 Electrical safety conforms to standards for electrical safely IEC-60601/IS13450.
4.4 Comprehensive warranty for 3 years.
4.5 Manufacturer/Supplier should have ISO certification for quality
standards.
4.6 Comprehensive training for lab staff and support services till familiarity
with the system.
5. Documentation:
5.1 Certificate of calibration and inspection from factory.
5.2 list of equipment available for providing calibration and routine
preventive Maintenance Support as per manutaellircr documentation in
service/technical manual.
5.3 User/Technical/Maintenance manual to be supplied in English.
5.4 list of important spare parts and accessories with their part number and
costing.
5.5 Log hook with instruction for daily, weekly, monthly and quarterly
maintenance checklist.
217
The job description of the hospital technician and company service engineer
should he clearly spelt out.
7.
BB-07
Sealer, Stripper and
Cutter for Blood bag
tubing
8.
BB-08
VDRL Shaker (Rotator)
Platform size 300x300 mm spring holder which can accommodate concave
slider etc.
9.
BB-09
Coagulometer, SemiAutomated
1. 16 incubation positions for samples (4 cells x 4 columns).
• For sealing and cutting the blood bag tubings.
• Each sealer, stripper and cutter should be supplied with 50,000 (fifty
2. 2 measurement channels,
3. 2-4 positions for reagents (one with magnetic stirrer), and 2 pipette
4. Four independent built-in timers for Incubation.
5. Measurement possible In plasma,
6. Automatic pipette (electronically connected or manual start up).
7. Backlight LCD display, 4 lines of 40 characters with built-in printer,
8. Results in seconds and in various units ( INR, Ratio, Gm/ L mg/ds,
IC/ml),
9. RS 232 interface,
10. Incubation and measurement wells at 37oC +/- 0,5oC.
218
11. Tests; PT, PTT, TT, FIB (Claus and PT derived), Factor II, V, VII, VIII,
IX, X, XI, XII, FIctcher, VT (Venom time), APCR, AT-III (clot), Protein C
(clot), Protein S (clot), Heparin, STAT (PT/PTT).
10.
11.
BB-10
BB-11
Water Bath
Digital Analytical
Balance (Single Pan)
1.
small (app dimensions 40-45 x 35-10 x 20-25 cms) light, stainless steel
body.
2.
Microprocessor controlled
temperature etc.
3.
Temp. Range 37oC to 56oC +0.50oC.
4.
Should have a stirrer for circulation.
5.
Bath Capacity 8-10 liters.
programmable,
digital
display
for
Capacity : 200 grams.
Readability : 0.01 grams.
Linearly : Plus Mnus 0.002 grams.
Reproducibility : Plus Minus 0.001 grams.
Dimension : To be declared.
Stainless steel path.
Percentage weighing, counting tar (0-200 grams) auto calibration with
built in masses.
• 220/240 volts, 59 cycles, single phase.
• The balance should be supplied with graft shield. The equipment should be
suitable for 0 to 40oC at 95% ambient condition.
•
•
•
•
•
•
•
219
• Complete technical specification, illustrative technical literature/leaflet
etc. shall be enclosed along with the offer indicating the model quoted.
• Complete and satisfactory type test certificate as per T/E specification
shall be submitted at the time of final inspection.
12.
BB-12
Refrigerated Water
Bath (Cryobath)
• Features : Should include timer of 2 hours fixed and variable temperature
control, over temperature safety limit with audiovisual alarm, power
switch and digital temperature display, number of digit and resolution
shall be included in the offer.
• Capacity: 65 liters.
• Storage Capacity : Holds up to minimum 5 stainless steel racks.
• Overall interior dimension : Should be indicated by the bidder.
• Operating temperature : +4oC Control sensitivity plus minus 0.2oC.
Uniformity plus minus 0.2oC ambient temperature may be as high as
450oC
• The equipment should be able to thaw 15 plasma units in about 90
minutes. The equipments hold have:
(a) Stainless Steel filter screen for protecting pump in take from debris
such as levels etc.
(b) Stainless steel tank of 22 gauge designed with curved corners for easy
cleaning.
(c) Stainless steel lid at least 20 gauge..
(d) Out side mild steel sheet of 18 uage.
• The Following accessories should be part of configuration:
220
(i)
Compression rack holder.
(ii)
Frozen Plasma rack holder.
(iii) Thermometer for visual verification of water temperature.
• A suitable battery charger shall also be supplied so that charging
batteries continue when the equipment on main.
• Equipment shall be supplied in suitable case.
13.
Di-Electric
tube sealer
•
•
•
•
•
•
•
•
It should be less than 3 Kgs with carry bag.
The sealing should be 750 per hour/1500 sealing per charged battery.
Rechargeable batteries with a back up of minimum 6 hours.
Automatic detection of the tube by pressing of a lever which activates
sensor.
Minimum sealing time (<2sec).
Detection of wet tube, Leakage and Sealing defect. Alarm in case of seal
not safe and completed.
Compatible with the tubes, of various manufacturers of blood bag.
Should seals 3.0 to5mm tubes with wall thickness of 0.75 mm.
Protection against electric shock.
221
NAME OF DEPARTMENT : PSM
S.No. Item Code
No.
1.
PSM-01
Equipment
Extraction
apparatus fat
complete
Specification
Fat extractor operates on 115 volts. 50/60 Hz (Max) at 5.2 amps., It is
shipped complete with power cord and grounded 3 wire plug. Standard
features are as follows :
1. Main power on -off non spark mercury switch.
2. Full range variable heat control switch. Each switch controls two heats.
3. All stainless steel type-301 condenser assembly.
4. Pressure relief values for each condenser.
2.
PSM-02
Filter paste
chamber land
complete set
-
3.
PSM-03
Filter burke felt
SS-4 stainless produces 24 galloons per day
4.
PSM-04
Hydro meter spirit
5 Let with swing top seal
5.
PSM-05
Hydrometer milks
Hyudro meters 1 Range g / ml
designatio
Sub division
Length (mm)
No. 1
1.025 to 1.035
0.002
240
No. 2
1.025 to .035
0.0005
215
222
No. 1 A
6.
PSM-06
Hydrometers wet &
dry BULB 1
-
7.
PSM-07
Balance analytical
200 gm
200 gm
8.
PSM-08
Balance for
weighting food
Capacity 2 kg
9.
PSM-09
Baby weighing
-
10.
PSM-10
Herpenders
calipers with for
skin fold thickness
-
11.
PSM-11
Height measuring
stand
-
12.
PSM-12
Refrigerator 9 cu ft.
9 cu ft
1.015 to 1.025
1
13.
PSM-13
ICE lined
refrigerator (ILR)
140 ltr.
14.
PSM-14
Dissecting
microscope
-
15.
PSM-15
Microscope 0-1
immersion
HB Laboratory Microscope
Magnification - 100x1000
223
0.002
240
NAME OF DEPARTMENT:- PAEDIATRIC SURGERY
1.
PS-01
Pediatric Fibreoptic
Sigmoid scope with
working snare, biopsy
forceps, etc.
Paediatric sigmoidoscope (colonoscope) is needed as per MCI norm. This
equipment is needed for diagnostic and therapeutic use for lower
gastrointestinal bleeding in children.
2.
PS-02
Celling Operation
Theatre Light.
Shadow less Celiling OT lights are needed for up-gradation of Operation
theater in Paed Surgery. This shadow less OT light include; Double Dome, 50-55
cm diameter with four reflectors, halogen bulbs etc.
3.
PS-03
SPO2 Monitors
This is needed for monitoring of vitals during surgery and in post-operative
periods in children.
4.
PS-04
Pediatric CO2
insufflators with
accessories for
laparoscopy
Pediatric CO2 insufflators is needed for use during laparoscopic procedures in
children. This equipment must include; automatic pressure & flow control, high
degree of safety control, functional and user friendly, gas worming, multiple
display, etc.
5.
PS-05
Operation Tables
Must be made from acid proof, stainless steel, easy to clean and immune to
disinfection agents, Needed for pediatric surgery operation theater.
6.
PS-06
Anesthesia work
station (Anesthesia
machine)
Needed for up--gradation of the Pediatric Surgery Operation Theatre.
224
7.
PS-07
Syringe Infusion
Pumps
This is needed for I/V fluids, and drugs administration for neonates.
8.
PS-08
Standard Infusion
pumps
This is needed for I/V fluids, and drugs administration for children.
9.
PS-09
Miscellaneous
Operating Instruments
(forceps, scissors, etc)
Needed for routing use in pediatric surgery OT. All operating instruments must
be of standard company.
10
PS-10
Radiant Warmers
Needed for Pediatric Surgery-NICU and for use in infants.
11
PS-11
CO2 Cylinders for
laparoscopy
CO2 is needed during laparoscopic procedures.
225
NAME OF DEPARTMENT : - PSYCHIATRY
S.No. Item Code
No.
1.
PSY-01
Equipment
Alcohol Breath
analyser
Specification
Alcohol breath analyser should be a digital detector which is accurate and
easy to use.
Space for Operation :
Available
Necessary Technical staff :
Test will be done by Psychiatrist
Breathalyser specifications :
Should display the breath alcohol concentration as a 3 digit readout in mg/l
and easy to use.
Indication of BrA/c 0.00 to 2.00 mg/litre % BrAC
Warm up time Below 20 seconds
Response time within 3 seconds
Auto adjust / reset, with rest button
Automatic switch off after 30 sec.
Recycle time 10 Seconds
Mouth piece 5 x washable mouth piece
Sensor semiconductor oxide sensor
Continuous using time
Without battery
Over 200 test
226
Replacement
Power supply - DC
Dimensions (mm) should be compact.
2.
PSY-02
Biofeedback
machine
Space for operation
Cabin beside the HOD chambers
Necessary technical staff :
Machine will be operated by psychologist and Psychiatrists
Specification :
Biofeedback apparatus should be able to record following parameters:
Pulse
GSR
Temperature
EEG
EMG
Parameters relax - I relax II
Biofeedback instruments should be compact in size and through its
ergonomically designed front panel facilitates ease of operation. Each
biofeedback instrument converts patient physiological changes (GSR,
Oulse rate, temperature, EEG & EMG) into audio as well as visual signals
which helps the patient performs self control or autogenic training leading
to relaxation.
Relax - I
GSR
INPUT : Through two silver - chloride electrodes, one connected to the
sweat glands and the other to any inactive point forming the reference.
227
GSR balance Range : 0 to 1999 K Ohms
Display : Visual LED bar in 21 steps (Green 10 steps, yellow 1 step, Red
10 steps) each steps changed by deviation of 10%, 5% or 1% (switch
selectable) from the mean GSR value.
Actual change in GSR value in K ohms is also displayed on a digital panel
meter.
TEMPERATURE
INPUT : Through a surface temperature probe.
Temperature Balance Range : 200C to 400C
3.
PSY-03
EEG Machine
Space for operation
Cabin beside the HOD chambers
Necessary technical Staff:
The post of EEG technician to be created and technician to be appointed.
However, machine can be installed in the department and the technician
services can be outsourced.
Specification :
• Windows based 32 channel digital EEG with Pentium PC and Inkjet
Printer features are :
Software :
o Featuring with Brain Mapping
User definable montages
Scrolling facility, test review, filter selection, network enabled.
228
• 32 channel acquisition comprising at 24 EEG and at least 5 bipolar,
Channels also unable as EEG and 03 DC / Transducer channels.
• Raw data storage for reformatting of sweep, speed, filters and
montages during analysis.
• Choice of multiple reference for brain mapping i.e. Car A1, A2 unked
ear, C2.
• Facility to view analysis and acquisition of same time.
• High performance machine is capable of taking record in ICU
condition.
• Unlimited continuous storage depends upon hard disk capacity.
• Facility to archieve data on CD
• Facility to measure amplitude and time duration.
• Unlimited montage formation can be possible.
• Facility for auto searching of events and comments.
• Facility to mark and delete events in analysis.
• User definable events with user definable hot keys.
• Facility of reporting in MS word (Ms office software optional)
• Facility to store pre define comments with user definable hot keys.
• Different modes of going to any part of EEG i.e.
a. Page forward and backward
b. Auto FWD & BWD
c. Event to event jump.
d. Search bar.
• User editable photic sets with frequencies ranging from 1 to 30 Hz.
• Optical isolation of head box to electrically isolate patient from data
system can be provide.
• Compatible with Windows 98 and windows millennium.
• Fully compatible with celeron pentium - P - III, Pentium - IV and
229
•
•
•
•
•
•
•
•
•
•
•
•
(Hardware).
CSA/DSA facility should be provided.
User has facility to make its own LF & HF filter.
A/D conversion 14 bit in hardware.
Sampling rate 1024 Hz/ Channel with resolution enhancement to 16
digital signal processing.
Storage rate 256 Hz. Channel with resolution enhancement to 16 bits
by signal processing.
Noise level < 1 u Mohm (0.1 to 1000 Hz)
Input impendence > 10 M ohm (0) to 100 Hz)
Acquisition method raw data with full sensitivity and full bandwidth.
Sensitivity / LF / HF / Notch / Muscle Rej / Montage implemented in a
only for display / Printouts.
Sensitivity 1 to 1000 u v / mm.
Lf (Hz) 0.1, 0.3, 0.5, 1.0, 3.0, 5.0 Hz and user definable (0 to 7 Hz)
pole.
Muscle Rej. ON / 00, 30 Hz double pole.
Hardware : Head box, Photic stimulator with adjustable stand
Accessories : Re-usable patient leads, EEG, Jelly, PC Cable etc.
4.
PSY-04
E.C.T. Machine
Space for operation :
1. Room beside the medicine seminar hall with allotted by superintendent
Hamidia Hospital. However it has not been handed over to department of
psychiatry because in this room tea canteen is running.
Necessary Technical Staff :
E.C.T. Machine will be operated by psychiatrists.
230
Specifications :
Constant current brief ECT machine with EEG and ECG recorder full
microcomputer based.
Other ECT specification :
Three modes of operation provides wide choice :
• Mode 1 :
Brief pulse PLS (frequency, pulse width duration current selectable energy
(J) calculated by micro computers).
• Mode 2:
Brief pulse PLS 2 (Current, energy, selectable frequency pulse width.
Duration calculated by the micro computer)
• Mode 3:
Sine wave gives a controlled current sine wave.
Current :
Constant current ECT. The current is continuous adjustable from 500 mA to
800 mA in steps mA.
• Frequency range :
30 to 90 Hz in 7 steps of 10 Hz each.
Pulse width :
Selectable from 0.8 mS to 2 mS in 7 steps of mS each.
• Duration :
Selectable from 0.5 mS to 2 mS in 7 steps of mS each.
• The energy that would be delivered to a standard impedance of 200
ohm by the selected parameter set is calculated dynamically.
• The actual energy delivered is displayed on screen according to the
actual have impedance.
• The patient head impedance s contuously measured dynamically
231
during treatment of the on set of every pulse.
• At any time if the head impedance is outside the permissible limit, the
shock prematurely terminated & display show ERR.
• Provision for automatic stop of the operation in case of any deviation
from the present limit or malfunctioning of any part.
• Isolation provided to separates both the operator and the patient
from the mal supply. Any accidental mishanding of the electrodes
can not result in unwarranted mains supply sock under any condition.
• All the function keys are sequentially locked with the RESET key.
The key needs to be depressed prior to depressing a function key.
Recorder selection :
• Chart speed - 10 mm and 25 mm / sec.
• Paper width - 105 mm
• Recording system - Ink writer
• Recording pen - Metallic light weight recording pen with 120 length.
Marker - Gives continuous mark as 1 Sec. intervals.
EEG Section :
• Sensitivity : Selectable from 20, 100, 200, 500 uv per chan.
• Frequency response : 2-60 Hz with 50 line filter.
• CMRR : > 80 db.
• Calibration voltage : 50 uv.
ECG Section :
• Sensitivity : Selectable from 0.5, 1 & 2 mv / cm.
• Calibration voltage : 1 mv.
232
• Frequency response : 2-60 Hz with 50 Hz line filter.
CMRR : > 80 db
5.
PSY-05
Lithium analyser :
Lithium analyser can be use to measure serum lithium.
Space for operation :
Cabin beside the HOD chambers
Necessary technical staff :
Machine will be operate by psychiatrists
Specification :
01. Compact design
02. High performance and accuracy
03. Easy opertion
04. Direct printer connectivity
6.
PSY-06
Psychometric tools
Space for operation :
Available
Necessary technical staff :
The post of cliical psychologist will be created and to be filled. At present
psychometric tests are done by Rahul Sharma (Clinical Psychologist) who
is appointed under District Mental health Program, Sehore.
Following psychological tests are required :
A. Personality Test :
01. Rorschach test with manual (Exiner's system)
02. 16PF Test : Farm A, B, C and D with manual
233
B. Intelligence Tests :
01. Wechsler Adult intelligence scale-R (Indian Adaptation) with manual.
02. Wechsler children intelligence scale-R (Indian Adaptation) with manual.
03. Raven's progressive color matrices with manual.
04. Segulin form board with manual.
C. Cognitive Test :
01. AIIMS Battery of Neuro cognitive assessment with manual.
234
Name of department burn and plastic surgery
S. No. Item No
Name of Equip
1
Electic Dermatome
(S/S – Stainlesst Steel,
Tunguston Coated
Rust resistant)
2
Skin Graft Mesher
(S/S – Stainlesst Steel,
Tunguston Coated
Rust resistant)
3
Skin grafting Handle
(S/S – Stainlesst Steel,
Tunguston Coated
Rust resistant)
Specification
1 The Dermatome should be able to cut grafts or various widths. Should be provided with
variable Gpards to adjust the width of the Graft to 2". 2" or 4". Should not need any earner to lift
the Graft from the donor (site. The cut graft should automatically fold into the pockjet of the
Dermatome. The graft should be served by simplify lifting of the Dermatome up & away from the
donor site| without a carrier. The thickness of the graft should be.'adjusted with a pointer on the
scale. The thickness of the graft should be adjustable to thousands of an inph. The Dermatome
unit should be supplied complete with motor unit in the handle, set of guard, calibration guide,
power plug cord, screwdriver & should be supplied complete with a carrying case for proper
maintenance j and 20 blades.
Mesher should have a full range of meshing ratios, with adjustable meshing drum allowing
meshing ratios from 1:1 to 4:1
Should be able to use any sterile smooth plastic plate of 0.5mm thickness as Skin graft
corner.
Variable Mesher should be able to operate both as powered or manual mesher
Should be simple & ergonomic design. Should be provided with
1. Sterilizing container
2. Skin graft Carrier
3. Power Pack including motor gear, batteries.
4. Ratchet
5. Skin Graft Mesher
6. Mesher Sheet
1.
2.
3.
4.
Skin Graft handle humbys
Silver knife handle (Razor blade handle)
Skin graft handle box-autoclavable
Skin graft board (Graft spreader)
235
4
Pneumatic Tourniquet
(S/S – Stainlesst Steel,
Tunguston Coated
Rust resistant)
The Tourniquet should be automatic one wit instant increase in pressure, auto regulator to
control pressure in the cuff, automatic time setting with auto alarm.
Should have battery back-up system automatically engaged if AC current is interrupted.
Should have computerized memory.
Should have microprocessor monitors and gives alarm both by audible & visual indicators.
Should have alarm for low pressure, low battery, leaks, kinks elapsed time and start up checks.
Should be able to operate either as single or double cuff (IVRA) function.
5
Microprocessor controlled
Power driver Systems
(S/S – Stainlesst Steel,
Tunguston Coated
Rust resistant)
Basic Plastic Surgery
Insturment Set
(S/S – Stainlesst Steel,
Tunguston Coated
Rust resistant)
Should be provided with autoclavable tourniquet cuffs with silicone bladder single and
double for baby, child & audit for ami & thigh.
Single Cuff Set of 5 - Set of 3
Double Cuff Set of 5 - Set of 2
Microprocessor controlled power driver system should provide complete functions of bone
harvesting drillings & fixation of small bone & helps in osteosynthesis.
Should have computerised control with touch screen facility having options of digital display
of spjeed & to preselect acceleration & beraking of handpiece speed.
Should be provided with cable & footswitch & should be provided with complete set of
following accessories
Universal Drill Multiple handpieces 1:5 speed upto 30,000 rpm.
Micro Saggital Saw with blades with speed of 20000 cycles/min.
Micro Oscillating saw with blades with speed up^o 15000 rpm.
Micro reciprocating saw with blades with Speed of 20000.
The instruments should be of improved steel with high precision quality with CE, TUV or ISO
9002 certification.
1 The fine cutting instruments should be of Tungsten carbide - Supercut variety.
The needle holders should be with Tungsten Carbide inserts for extra durability.
1
Converse skin hook small.
236
1
Converse skin hook large.
1
Mathieu retractor (Cat's Paw)
1
Hajek's Retractor
1
Langenbeck's retractor sinal 1.
1
Langenbeck's retractor large.
1
Weislander Retractor (self retaining)
1
Dental Syringe.
1
Stainless Steel Scale 6"
1
1
Stainless Steel Scale 12"
Castroviejo Calipers.
1-
Bristovv Bone laver.
1
Smith Peterson Osteotome 1 Omm
1
Smith Peterson Osteotome 20mm
1
Smith
1
Tessier Osteotome Set of 8.
1
Gouge 7" 2mm
1
Gouge 7" 4mm
Peterson Osteotome 25mm
237
1
French Chisel llmm
1
Halsted Mosquito artery forceps 5 3/4" Cvd.
1
Halsted
1
Kocher Forceps
1
Kelly Artery forceps st.
1.
Kelly Artery forceps cvd
1
1
1
Dandy Tissue Forceps
Mcindoe dissecting forceps 6" nontoothed serrated jaws.
Potts Smith Dressing forceps 7"
1
Adson Tissue forceps 4 3/4" toothed delicate.
1
Adson Tissue forceps serrated jaws 4 3/4"
1
Gillis Dissecting forceps 6" toothed.
1
Allies Tissue forceps 6" 4x5" teeth.
1
Elevator double ended, spoon shaped. Molt Dissector
1
1
Howarth Elevator.
Scissor angle short blades 18mm with serrated bledes
1
Kilner scissors straight with fine points.
Mosquito artery forceps 5 3/4" St.
238
1
Kilner scissor curved on flat 12cm
1
Mcindoe scissors cvd. On flat with round points 7"
1
Iris Scissors straight sharp Tc supercut.
1
Iris Scissor cvd sharp Tc supercut.
1
Surgical scissors 5" st. sharp points TC
1
Mayo Hegar Needle Holder 6 1 4"
1
Derf Needle Holder 4 3/4"
1
Maltz Rasp Tc
1
Mcindoe rasp TC
1
Mallet 8 oz
1
Asch forceps
1
Ruskin Bone cutting forceps
1
Luc's Forceps
1
Padgett St. bone cutting forceps
1
Padgett angled bone cutting forceps
1
Bunnel Bone drill small
1
Knuckle Bender Large
239
1
Knuckle Bender Medium
1
Kunckle Bender Small
1
Mcindoes Raspatory
1
Bard Parker knief Handle No.3
1
Bard Parker knief Handle No.4
1
Bard Parker long knife handle No.3
Barron Knief handle octagonal .Backhaus Towel clips 3 '/21'
Sponge Holding tube 9 1A"
Frazier suction tube 8 French
Frazier suction tube 10 French
Magilli's suction tube size 2
Meade wire cutter pliers
Dressing Trolley
240
Cleft Palate Instruments
(S/S – Stainlesst Steel,
Tunguston Coated
Rust resistant)
Dingman Mouth GAG – Adult
Dingman Mouth GAG – Paediatric
Dingman Mouth GAG – Advanced Millard Model
Dingman Mouth GAG – with Fibre Optic connection for the blades
Cleft Palat Elevatos Short Straight
Cleft Palat Elevatos Short left
Cleft Palat Elevatos Short Right
1 Cleft Palate Elevators CD Left
1
Cleft Palate Elevators CD Right
1
Downs Cleft Palate Elevators Left
1
Downs Cleft Palate Elevators Right
1
Downs Cleft Palate Elevators Straight
1
Howarth Dissector/Elevator 5mm
1
Howarth Dissector/Elevator 3mm
1
Septal Elevator
1
Kilner Skin Hook
1
Flat Skin Hook
1
Cleft Palate Hook Single
1
Celft Palate Hook Double
1
Long Tonsil Artery Forceps Straight
241
1
Long Tonsil Artery Forceps Curved
1
Long toothed Waugh Forceps
1
1
Long Non toothed Waugh Forceps
Adsons Forceps 4 3/4"
1
Adsons Toothed Forceps 4 3/4"
1
Senn Double End Retractor Plain
1
Senn Double End Retractor Claw Type
1
Hajek Cheek Retractor
1
Disposable Cheek Retractor Paediatric
1
Disposable Cheek Retractor Adult
1
Cats Paw pair
1
IRIS Scissor straight Sharp 4'/2"
1
Iris Scissors Curved Sharp 4'/4"
1
Tenetomy Scissors Curved
1
Cleft Palate Scissors
1
Dental Sealers Set
1
Dental Sealer Double Ended '- T\pes
242
Dental Curette 6"
1
Mitchells Trimmer
Ruler
Calipers
Long needle Holder
1 Knot Tier / Pusher – Negus 1
1 Mouth Prop.
Boxes, Containers
(S/S – Stainlesst Steel,
Tunguston Coated
Rust resistant)
Stainless Steel Box for Max kit with two trays. Stainless Steel Box for Bone plates &
screw.
Stainless Steel Box for Bone Plate & Screw small for 1.5, or 2 or 2.5mm
Stainless Steel Box for General Instruments small, medium big.
Box with 12 containers for screw & plates.
Drill Bits Container
K. Write Container
Mini Screws Container
Mini plate Container
General instrument Box with SiJicone Mate
243
1. Round skin hook gillies & Medium
2. Flat Skin hook
3. Flat skin hook long
4. Double skin hook sharp - small
5. Double skin hook sharp wide
6. Double hook blunt
7. Killians septal elevator
8. Freer elevator
9. Joseph skin elevator
10. Cottle elevator
11. Pierce elevator
12. Masing - Graduate elevator
13. Farabeuf elevator straight
14. Farabeuf elevator curved
15. Killians septal elevator with suction.
16. Aufricht retractor wide/Narrow
17. Aufricht waiter retractor
244
18.Kilner ala retractor
19. Senn double end retractor - claw type
20. Senn double end retrctor
21. Senn miller retractor
22. Cottle columella clamp
23.'/i MM Chisel
24.
3/4 MM Chisel
25. 7MM Chisel
26. Single guarded chisel
27. Silver chisel left
28. Silver Chisel right
29. Double guarded chisel 7/8/14/I6MM
30. Me Indoes nasal chisel 13/15 MM
31. Silver cartilage chisel cd It/rt
32. Converse osteotome 1 mm/2mm
jf
33. Nasal saw straight
34. Nasal Saw left
245
35. Nasal Saw Right
36. Ballengers swivel knife
37. Ballengers swivel knife bayonet shaped
38. Joseph button end knife
39. V cut Gouge
40. Blunt gouge
41. Bayonet Gouge
42. Cross Serrated Rasp
43. Forward cutting rasp
44. Back ward cutting rasp
45. Double Action Rasp
46. Glabellar Rasp
47. Maltz rasp Double ended
48. Diamond Rasp - Small
49. Diamond Rasp - Medium
50. Mallet - Nylon Head
51. Mallet Ordinary
246
52. Cartilage Crusher
53. Septal Lower Lateral Morselizer
54. Sucution Tio No. 7/9/12
55. Ruler
56. Calipers
57. Killains Nasal Speculam
58. Thudichums Nasal Speculam
59. Trocar & cannula
60. Flat Knife Handle No.3
61. Nasal Splint Pack of 10
62. Nasal Splint with Forehead Extension Pack of 10
63. Webster Needle Holder
64. 5" Needle Holder
65. Gillies Needle Holder
66. TC Needle Holder
67. Adsons Forceps Non Toothed
68. Adsoons Forceps Toothed
247
69. Adsons Forcept Cross Serrated
70. Bayonet Forceps
71. Tilleys Dressing Forceps
72. Lues Forceps Set of 3
73. Septum Punch Forceps
74. Asch Forceps
75. Walsham Forceps
76. Baby Walsham Forceps
77. Nasal Septal Forceps Straight & Angled
78. Baby Mosquito Forceps Straight
79. Baby Mosquito Forceps Curved
80. Tenetomy Scissors Straight
81. Tenetomy Scissors Curved
82. Kilner Scissors Straight
83. Kilner Scissor Curved
84. Iris Scissors Curved
85. Foraon Angular Scissors
248
86. Aufricht Scissors
87. Cartilage Scissors
Infusion Pump
(S/S – Stainlesst Steel,
Tunguston Coated
Rust resistant)
Infusion Pump
Medical Pump (4169) Dispenser DP 20 For Tumescense Local Anesthesia For Lipio
Suction Surgery 0-20
LT/H with On-OFF Pdeal, O.T. Suitable with Forward Mode, Tubing
Set
Nouvag Swiss Make
Radio Frequency Machine
(S/S – Stainlesst Steel,
Tunguston Coated
Rust resistant)
Dermabrasion Instrument
(S/S – Stainlesst Steel,
Tunguston Coated
Rust resistant)
With Monopolar and bipolar Resurfacig and other accessory probes and models
1. Korean Micro motor with detachable NSK hand Piece
2. Keren Micro Motor with detachable NSK Hand Piece
(Sun Brust)
Diamond Burrs (Round Wheels)
3. 15x1 Omm
4. 14x1 Omm
5. 1 IxSmm
Cylindrical
6. 6x11mm
7. 7x11mm
249
8. 12x14mm
9. Pears 6x1 Omm
10. Bullet 4x8mm
11. Flame/Christmas Tree 8x 12mm
12. Cutting Burrs
13. Drill Bits to Fir Micromotor Hand Piece (1 m 1.5 & 2mm)
Teaching Aids
(S/S – Stainlesst Steel,
Tunguston Coated
Rust resistant)
1.
2.
3.
4.
5.
6.
7.
Computer
LCD Projector
Digital Camera – Still and Movie
Audio System
Lap top
Laser Pointer
White screen with stand for projection 6 x 4 ft.
(S/S – Stainlesst Steel,
Tunguston Coated
Rust resistant)
DEAN
GANDHI MEDICAL COLLEGE BHOPAL
250
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising