Black & Decker FSMH1621 Steam mop Instruction manual

Black & Decker FSMH1621 is a versatile steam mop designed for sanitizing and cleaning various types of flooring, including sealed hardwood, laminate, linoleum, vinyl, ceramic tile, stone, and marble. It also features a detachable handheld steam cleaner for added convenience in cleaning specific areas and surfaces. With its adjustable steam settings, you can customize the steam intensity based on the cleaning task.

PDF Download
Document
Black & Decker FSMH1621 Steam mop Instruction manual | Manualzz

Advertisement

Advertisement

Advertisement

Frequently asked questions

The FSMH1621 comes with a hand-held delta head, a small brush, a flexible hose and handle, a large squeegee, a carpet glider, and a jug for filling the water tank.

Slide the bottom end of the handle into the top end of the steam mop body until it clicks into place. Make sure the arrow on the handle is aligned with the top of the steam mop body.

Slide the bottom end of the steam mop body onto the steam head until it clicks into place.

Holding the back of the steam mop body, push the hand-held steam cleaner firmly into the steam mop body until it clicks into place.

Use clean tap water. In areas with very hard water, it's recommended to use de-ionized water.

It takes approximately 15 seconds for the steam mop to heat up.

Always place the steam mop with the handle in the upright position. Make sure the steam mop is turned off and allow it to cool down before storing.

Open the filler cap, pour out the remaining water, and close the filler cap securely.
Preparing document for printing…
0%