Bovie IDS 300 Electrosurgical Generator User’s Guide

Below you will find brief information for Electrosurgical Generator IDS 300. The Bovie® IDS-300™ includes the latest technology. This unit offers unsurpassed performance, flexibility, reliability, and convenience. It includes the following features: Two Cut Modes, Cut I & Cut II Two cut modes give the surgeon flexibility to cut all types of tissue without losing performance. Blend with 10 settings The Blend mode is a combination of cutting and hemostasis. The IDS-300™ gives the surgeon freedom to adjust the desired level of hemostasis. Presets The surgeon can store 10 user-defined presets for easy recall of frequently used settings. Two levels of coagulation: Pinpoint and Spray Pinpoint provides precise control of bleeding in localized areas. Spray provides greater control of bleeding in highly vascular tissue over broad surface areas. Return electrode sensing and contact quality monitoring The IDS-300™ incorporates a return electrode contact quality monitoring system (Bovie NEM™). This system detects the type of return electrode: solid or split. The system also continually monitors the contact quality between the patient and the split return electrode. This feature is designed to minimize patient burns at the return electrode site. FDFSTM (Fast Digital Feedback System) The FDFSTM (Fast Digital Feedback System) measures voltage and current at 5,000 times a second and immediately adjusts the power to varying impedance during the electrosurgical procedure.

PDF Download
Document
Electrosurgical Generator IDS 300 User’s Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Two Cut Modes
  • Blend with 10 settings
  • Presets
  • Two levels of coagulation
  • Return electrode sensing and contact quality monitoring
  • FDFSTM (Fast Digital Feedback System)

Frequently asked questions

The two cut modes are Cut I and Cut II. Cut I generates constant output power over a wide range of impedances. Cut II is a softer cut that generates constant output power over a small range of impedances.

The Blend mode is a combination of cutting and hemostasis. The Blend mode improves the rate of targeted tissue desiccation without increasing the power delivered by the generator.

The surgeon can store 10 user-defined presets for easy recall of frequently used settings.

The two levels of coagulation are Pinpoint and Spray. Pinpoint provides precise control of bleeding in localized areas. Spray provides greater control of bleeding in highly vascular tissue over broad surface areas.

The Bovie NEM™ system detects the type of return electrode: solid or split. The system also continually monitors the contact quality between the patient and the split return electrode. This feature is designed to minimize patient burns at the return electrode site.

The FDFSTM (Fast Digital Feedback System) measures voltage and current at 5,000 times a second and immediately adjusts the power to varying impedance during the electrosurgical procedure.
Preparing document for printing…
0%