n
a
Fr
he
=
Ww
Le)
€
m
TK. 3 ULTIMATE
EDITION
Max 1800 Lumens
User manual
Illuminate Your Adventure
—— "
Fenix TK35 Flashlight Ultimate Edition
The TK35 Ultimate Edition focuses the latest Cree MT-G2 LED
exactly where needed with broad beam coverage. Capturing details
and color unlike many other flashlights, the 1800-lumen TK35
Ultimate Edition features six output options and dual tail switches in a
durable, well-balanced design.
Power switch
Head Battery Tube Mode switch
Technical Parameters
General Mode
ANSI/NEMAFL 1 Strobe sos
Turbo High Mid Low
OUTPUT 1800 Lumens 750 Lumens 250 Lumens 25 Lumens 1800 Lumens 250 Lumens
RUNTIME 1h30min 4h 13h30min 150h / /
DISTANCE 242m (Max)
INTENSITY 14640cd (Max)
IMPACT
RESISTANT im
WATERPROOF IPX-8,underwater 2m
ACCESSORIES Lanyard, holster, O-ring
Notice: The above-mentioned parameters (lab-tested by Fenix using ARB-L2S 18650 Li-ion battery) are approximate and may vary between
flashlights, batteries and environments.
*Tk35 will automatically enter into the high brightness level from the turbo brightness level after a 5-minute working time with the security setting. As a
result, the runtime of the turbo brightness level is the accumulated time.
© Utilizes Cree MT-G2 LED with a lifespan of 50,000 hours
© Uses two 18650 rechargeable batteries (Li-ion) or four 3V CR123A
batteries (Lithium)
© 165mm (Length) x 44mm (Diameter) x 52mm (Head)
© 265-gram weight (excluding batteries)
© Digitally regulated output - maintains constant brightness
© Reverse polarity protection to protect from improper battery installation
© Low-voltage warning function to remind users of low power
© Dual button switch in the tail, convenient operation
© Made of durable aircraft-grade aluminum
© Premium Type III hard-anodized anti-abrasive finish
© Toughened ultra-clear glass lens with anti-reflective coating
Operation Instruction
On/off operation
The big button in the tail is the power switch, the small one is the mode switch.
Press the power switch gently for momentary lighting or until it clicks to
activate and lock the TK35. Press it again to turn the light off.
Mode selection
Press the mode switch to cycle through four different brightness levels from
Turbo— Low — Mid— High.
Strobe mode
With the light on, press and hold the mode switch for 1 second to enter into
Strobe mode.
SOS mode
With the light on, press and hold the mode switch for about three seconds to
enter into SOS mode.
While in Strobe or SOS mode, a single press on the mode switch returns you
to the non-flashing mode.
Intelligent memory circuit
The Fenix TK35 memorizes the last brightness level used in the general
mode, but it will not remember the Strobe mode or SOS mode. The next time
you turn the flashlight on, it will activate the last brightness level you selected.
Over-heat protection
The light will accumulate a great deal of heat when working in the turbo
brightness level for a long time. In order to avoid any potential safety hazard,
TK35 will transfer into the high brightness level automatically after a 5-minute
working time in the turbo brightness level. If the turbo brightness level is
needed, please reset it again.
Low-voltage warning function
The TK35 has a low-voltage warning function. When using the 18650 Li-ion
battery, low voltage is checked, the flashlight enters the lower brightness level;
if low voltage is checked in the Low brightness level, it will blink three times per
second every five minutes. In this case, the battery should be replaced or it will
cause damage to the battery. To ensure normal use, the flashlight will not turn
off automatically until the battery runs out completely. This function will not
support other types of batteries.
Battery Specifications
Type Dimensions | Voltage | Usability
Fenix ARB-L25/L2/L2M 18650 3.6V/3.7V Recommended sf
Non-rechargeable Batter(Lithium) | CR123A 3V Recommended a
Rechargeable Battery(Li-ion) 16340 3.7V Banned Ta
Rechargeable Battery (Li-ion) 18650 |3.6V/3.7V| Cautious* !
Rechargeable Battery(LiFePOs) | 16340 3.2V Usable af
Rechargeable Battery(LiFeP Ou) 18650 3.2V Banned bd
Warning: please do not mix using batteries of other manufacture, capacity,
size or type. Doing so will cause damage to the batteries or flashlights.
*18650 Li-ion batteries are powerful cells designed for commercial
applications and must be treated with caution and handled with care. Quality
batteries with circuit protection will reduce the potential for combustion or
explosion but cell damage or short circuiting are potential risks the user
assumes.
Battery Replacement
Unscrew the light head to take out the battery holder. Insert the batteries
correctly according to the signs at the bottom of the grooves. Put the battery
holder into the tube with the round side towards the light head and the raised
place in the side towards the groove in the inner wall of the tube. Screw the
light head back on.
Usage and Maintenance
© Please don't disassemble the sealed head as doing so can cause damage
to the flashlight and will void the warranty.
© We recommend the use of high quality battery. If the flashlight is not to be
used for an extended period, remove the battery, or the flashlight could be
damaged by electrolyte leakage or battery explosion.
© Due to the momentary-on tactical switch, the flashlight can be activated
when stored, transported or placed in a pocket. Unscrew the head one-half
turn to avoid unwanted operation.
© Long-term use can result in O-ring wear. To maintain a proper water seal,
replace the ring with an approved spare.
© Periodic cleaning of the battery contacts improves the flashlight's
performance as dirty contacts may cause the TK35 to flicker, shine
intermittently or even fail to illuminate for the following reasons:
Reason A: The batteries need replacing.
Solution: Replace batteries (Please confirm the correct installation of anode
and cathode).
Reason B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing
alcohol.
If the above methods don't work, please refer to the warranty policy before
contacting your authorized distributor.
Product Warranty
We will replace products with documented manufacturing defects within 15
days of purchase and repair a light free of charge within 24 months of
purchase if problems develop with normal use; if repair is required after 24
months from the date of purchase, we will charge for parts. The total repair fee
is dictated by the cost of the replaced materials.
Product Registration
We kindly suggest that you register your guarantee card on the official website
of Fenixlight Limited (www.fenixlight.com). You'll receive an extra six months
of warranty coverage once you have successfully registered. By participating
in an optional customer survey, you are entered in a drawing for free Fenix
products.
Warning
TK35 is a high-intensity lighting device capable of causing eye damage to the
user or others. Avoid shining the light directly into anyone's eyes.
">
