Simplicity FW45 Series with 52" Side Discharge Mower Deck (FW45BVE2852) Manual

Parts Manual
Mfg. No: 5901883
FW45 Series with 52" Side Discharge
Mower Deck (FW45BVE2852)
Copyright © Briggs & Stratton. All Rights reserved
25-Feb-2022
Table Of Contents
Model Components
Page
52" Mower Deck Group - Housing, Covers, Spindles, and Blades. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
52" Mower Deck Group - Pulleys, Belt, and Idler Arm S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . . . . . . . . . .
52" Mower Deck Group - Pulleys, Belt, and Idler Arm S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . . . . . . . . . . .
52" Mower Deck Group - Rollers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Decal Group - Brand and Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Decal Group - Safety and Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deck Lift Group S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Deck Lift Group S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Group S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Group S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Schematic - Charging Circuit S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Schematic - Charging Circuit S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Schematic - Cranking Circuit S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Schematic - Cranking Circuit S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Schematic - Ignition Grounding Circuit/Operator Presence S/N: 4001694244 and below. . . . . . . . . . . . . . .
Electrical Schematic - Ignition Grounding Circuit/Operator Presence S/N: 4001694245 and above. . . . . . . . . . . . . .
Electrical Schematic - PTO Clutch Circuit S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Schematic - PTO Clutch Circuit S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine & PTO Group - Briggs & Stratton EFI (Remote Oil Tank) S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . .
Engine & PTO Group - Briggs & Stratton EFI (Remote Oil Tank) S/N: 4001694245 and above. . . . . . . . . . . . . . . . . .
Engine Deck Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine Remote Oil Tank, Hoses, & Mount Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Frame Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel Supply Hose and Evap Group (No Canister). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel Tank and Mount Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Handle Bar Group S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Handle Bar Group S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydraulic Group - Hoses and Loom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydraulic Group - Transaxle Selector Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydraulic Group S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hydraulic Group S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Motion Control Group - Forward Speed Control, Operator Presence, and Foot Pedal S/N: 4001694244 and
Motion Control Group - Forward Speed Control, Operator Presence, and Foot Pedal S/N: 4001694245 and
Motion Control Group - Steering Levers S/N: 4001694244 and below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Motion Control Group - Steering Levers S/N: 4001694245 and above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parking Brake Group S/N: 4001694244 and Below. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parking Brake Group S/N: 4001694245 and Above. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transaxle Drive Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Transaxle SERVICE PARTS - 5108694 and 5108693. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wheel and Tire Group. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Torque Specification Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
3
n
o
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
84
86
25-Feb-2022
52" Mower Deck Group - Housing, Covers, Spindles, and Blades
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
4
Mfg. No: 5901883
n
o
25-Feb-2022
52" Mower Deck Group - Housing, Covers, Spindles, and Blades
REF NO
PART NO
QTY
DESCRIPTION
0010
0015
0020
0030
0040
5601106
5100993
5025320X14
5025477
5101756S
1
3
3
3
1
0080
0090
0120
0130
0140
0160
0164
0165
0170
0210
0220
0260
0270
0370
0390
0400
5025145X6
5025392
5413400AA
5413499
5413398AA
5025394
5061300
5025155
5025045
5025011X6
5022308
5412336B
5412335B
5416910AA
5025146X12
5025390X8
2
3
1
1
1
21
1
8
2
7
6
1
1
1
3
18
DECK SHELL W/ DECALS, FW35-52 (5422046B)
SPINDLE ASSM, CAST IRON 8.0 - 6-BOLT
BOLT, 5/8-11 X 1-3/4 GD8
WASHER, BLADE BOLT, 9/16" F436, CZ
BLADE, 18 X .25 X 2.5, 1 X 3.5 (SET OF THREE)
-(Refer to Note :*)
BOLT, 5/16-18 X 3/4, CARRIAGE, GD5, CZ
NUT, 5/16-18 HEX NYLOCK FLANGE NUT
WELD, MOUNT, DISCHARGE CHUTE - BLK
CHUTE, RUBBER DISCHARGE (5104442)
SUPPORT, DISCHARGE CHUTE - BLK
NUT, 3/8 - 16 HEX NYLOCK FLANGE
ROD, MOUNT, CHUTE, 61, CZ
WASHER, 5/16" SAE
NUT, Hex, Nylon Lock, 5/16-24
BOLT, 5/16-18 X 3/4 GD5
BODY CLIP, 5/16-18 7GA. MATERIAL
GUARD, DECK, 52, LH - RED
GUARD, DECK, 52, RH - RED
PLATE, DEFLECTOR, 52 DECK - BLK
BOLT, 3/8-16 X 1-1/2, CARRIAGE, GD5, CZ
BOLT, Flange, 3/8-16 X 1
r
o
u
F
d
t
o
o
r
N ep
R
i
t
c
n
o
Footnotes:
Note : * Set of 3 blades.
Copyright © Briggs & Stratton. All Rights reserved
5
25-Feb-2022
52" Mower Deck Group - Pulleys, Belt, and Idler Arm S/N: 4001694244 and below
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
6
Mfg. No: 5901883
n
o
25-Feb-2022
52" Mower Deck Group - Pulleys, Belt, and Idler Arm S/N: 4001694244 and below
REF NO
PART NO
QTY
DESCRIPTION
0010
0020
0030
0040
0050
0080
0090
0100
0110
0130
0140
0150
0160
0210
0230
0290
0300
0310
0320
0330
0360
0370
0380
0390
0400
5103392
5104717
5104716
5101351
5412371A
5104172
5025158
5047142
5050407X10
5025017X36
5025396
5025405
5104166
5025017X20
5105145
5025394
5025128
5025406
5023497
5102406
7078243
5103262
5025013X12
5025165
5046916
1
2
1
3
1
1
1
1
3
1
4
3
1
3
3
2
1
3
1
1
2
2
1
1
2
BELT, 5V, 147.40"EL, LRG ARAMID,WRPD, RC
PULLEY, FLT IDLR, 6.0 X 1.0 X .50, CZ
PULLEY,IDLER,BACKSIDE,NOSEAM 6.25ODX.5ID
PULLEY, 5.926OB X .985ID, SINGLE B-SEC
WELD, TENSION ARM, CUTTER DECK - BLK
SPACER, .505 X .75 X 2.085, CZ
WASHER, 1/2 SAE
SPACER, .52 X 1.25 X .70, PM, CZ
KEY, 1/4" SQ. X 1-1/4
BOLT, 1/2-13 X 4-1/2" GD5 YZ
NUT, Hex Flange, Nylock, 1/2-13
NUT, 3/4-16 Hex
SPRING, EXT, 1.5ODX12.25X.234WIRE BLK
BOLT, 1/2-13 X 2-1/2" GD5 CZ
SHIELD, BEARING, 1/2 ID X 2-7/8 OD, CZ
NUT, 3/8 - 16 HEX NYLOCK FLANGE
NUT, 3/8-16 Hex Large Serrated Flange
WASHER, 3/4 BELLEVILLE CL/ZC
EYE BOLT, 3/8-16 X 5, 2.88THRD, 1EYE, CZ
SPACER, .38 X 1.13 X .781 STEP, CZ
BEARING, BALL, AXLE
SPACER, IDLER ARM, 1/2, PM
BOLT, 3/8-16 X 1-1/2" GD5 CZ
WASHER, 3/8" Fender
SPACER, .51 x 1.75 x .75
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
7
u
d
i
t
c
n
o
25-Feb-2022
52" Mower Deck Group - Pulleys, Belt, and Idler Arm S/N: 4001694245 and above
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
8
Mfg. No: 5901883
n
o
25-Feb-2022
52" Mower Deck Group - Pulleys, Belt, and Idler Arm S/N: 4001694245 and above
REF NO
PART NO
QTY
DESCRIPTION
0010
0020
0030
0040
0050
0080
0090
0100
0110
0130
0140
0150
0160
0210
0230
0290
0300
0310
0320
0330
0360
0370
0380
0390
0400
5103392
5104717
5104716
5101351
5412371A
5104172
5025158
5047142
5050407X10
5025017X36
5025396
5025405
5104166
5025017X20
5105145
5025394
5025089
5025406
5105844
5102406
7078243
5103262
5025013X12
5025165
5046916
1
2
1
3
1
1
1
1
3
1
5
3
1
3
3
1
1
3
1
1
2
2
1
1
2
BELT, 5V, 147.40"EL, LRG ARAMID,WRPD, RC
PULLEY, FLT IDLR, 6.0 X 1.0 X .50, CZ
PULLEY,IDLER,BACKSIDE,NOSEAM 6.25ODX.5ID
PULLEY, 5.926OB X .985ID, SINGLE B-SEC
WELD, TENSION ARM, CUTTER DECK - BLK
SPACER, .505 X .75 X 2.085, CZ
WASHER, 1/2 SAE
SPACER, .52 X 1.25 X .70, PM, CZ
KEY, 1/4" SQ. X 1-1/4
BOLT, 1/2-13 X 4-1/2" GD5 YZ
NUT, Hex Flange, Nylock, 1/2-13
NUT, 3/4-16 Hex
SPRING, EXT, 1.5ODX12.25X.234WIRE BLK
BOLT, 1/2-13 X 2-1/2" GD5 CZ
SHIELD, BEARING, 1/2 ID X 2-7/8 OD, CZ
NUT, 3/8 - 16 HEX NYLOCK FLANGE
NUT, 1/2-20 Hex Jam
WASHER, 3/4 BELLEVILLE CL/ZC
SPRING PULLER, 1/2-20, 5.00
SPACER, .38 X 1.13 X .781 STEP, CZ
BEARING, BALL, AXLE
SPACER, IDLER ARM, 1/2, PM
BOLT, 3/8-16 X 1-1/2" GD5 CZ
WASHER, 3/8" Fender
SPACER, .51 x 1.75 x .75
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
9
u
d
i
t
c
n
o
25-Feb-2022
52" Mower Deck Group - Rollers
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
10
Mfg. No: 5901883
n
o
25-Feb-2022
52" Mower Deck Group - Rollers
REF NO
PART NO
QTY
DESCRIPTION
0010
0020
0030
0040
0050
0060
0070
0080
0090
5025156
5047027
5104675
5025013X28
1714760
5025394
5105755
5020785
5025013X8
3
1
1
1
1
2
1
1
2
WASHER, 3/8 SAE
SPACER, .51 X .75 X .56, PM, CZ
SPACER, .38 X .50 X 2.50, CZ
BOLT, 3/8-16 X 3-1/2" GD5 CZ
WHEEL- 2.00 WIDE 3.88 DIA 0.531ID POLY
NUT, 3/8 - 16 HEX NYLOCK FLANGE
PIN, ROLLER, CZ
ROLLER, DECK
BOLT, 3/8-16 X 1" GD5 CZ
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
11
u
d
i
t
c
n
o
25-Feb-2022
Decal Group - Brand and Model
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
12
Mfg. No: 5901883
n
o
25-Feb-2022
Decal Group - Brand and Model
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5022812
5104767
5108862
5107428
1
1
1
1
DECAL, 52
DECAL, FERRIS LOGO, XL
DECAL, MODEL, W45
DECAL, FERRIS TEXT, 5"
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
13
u
d
i
t
c
n
o
25-Feb-2022
Decal Group - Safety and Operation
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
14
Mfg. No: 5901883
n
o
25-Feb-2022
Decal Group - Safety and Operation
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
7101665
5100490
5108757
5108832
5101291
5103665
5104269
5104213
5104268
5102628
5104266
-----
2
2
1
1
1
1
1
1
2
1
1
1
13
5106760
1
DECAL, DANGER DO NOT OPERATE W/O DEFLECT
DECAL, PEDAL
DECAL, TRANSAXLE SELECTOR VALVE
DECAL, DASH PANEL, W45
DECAL, CUT HEIGHT, SPDD
DECAL, FIRE HAZARD, 3.25W X 3.0H
DECAL, SPANISH MANUAL, IGES, C-TICK
DECAL, BELT ROUTING, F/SW35
DECAL, TRANSAXLE RELEASE, WB
DECAL, PARKING BRAKE SYMBOLS
DECAL, CUT HEIGHT, WB, 1.5"-5"
LABEL, OIL INFORMATION
-(Models w/ Remote Oil Tank Only)
DECAL, MAIN SAFETY, SULKY
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
15
u
d
i
t
c
n
o
25-Feb-2022
Deck Lift Group S/N: 4001694244 and below
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
16
Mfg. No: 5901883
n
o
25-Feb-2022
Deck Lift Group S/N: 4001694244 and below
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
5413900A
5413899A
5104238
5102664
5020095
1702779
5025281
5104209
5025013X22
5025394
5021541
5100732
5025160
5102665
5025156
5025394
5025013X12
5025396
5102774A
5102086
5025017X40
5021733
5025203X10
5413896A
5100548
5025443
5403925A
5413895A
5061010
5025017X26
5025150
5100731
5104220
5100634
5413894A
5025089
5105392
5104267
5025158
5025017X16
4
4
4
4
4
2
5
2
4
4
6
2
2
2
8
8
8
6
1
1
1
1
5
1
2
2
2
1
2
2
2
2
1
4
1
2
4
2
6
4
BRACKET, INNER TRUNION MNT - BLK
BRACKET, OUTER TRUNION MNT - BLK
PIVOT, DECK LIFT TRUNION, GREASABLE
ADJUSTER, DECK LIFT, CZ
GREASE FITTING, 1/4-28 Straight
JOINT-BALL .500-20 THD .500ID, CLR ZINC
WASHER, 5/8" SAE
ROD, DECK LIFT TIMING, 48-52
BOLT, 3/8-16 X 2-3/4" GD5 CZ
NUT, 3/8 - 16 HEX NYLOCK FLANGE
BUSHING, FLANGE
SPACER, .52 X 1.00 X 2.09 - SS
WASHER, 3/4" SAE
ROD, 1/2-20 X 5.50 TFL, CZ
WASHER, 3/8 SAE
NUT, 3/8 - 16 HEX NYLOCK FLANGE
BOLT, 3/8-16 X 1-1/2" GD5 CZ
NUT, Hex Flange, Nylock, 1/2-13
DECK CRANK, SW30, CZ - BLK
CAP, VINYL, 1.062 X 1.00 BLK
BOLT, 1/2-13 X 5" GD5 YZ
KNOB, PLASTIC, 1/2-13
PIN, COTTER, 1/8" X 1-1/4"
WELD, DECK LIFT LEVER, RH - BLK
WASHER, .390 X 1.50 X .109, YZ
BOLT, 3/8-16 X 3/4, PLT W/PATCH
PLATE, PIVOT BLOCK SUPPORT - BLK
WELD, DECK LIFT LEVER, LH - BLK
WASHER, FRICTION
BOLT, 1/2-13 X 3-1/4, HEX HD, GD5, CZ (SV)
WASHER, 1/2" USSZ
ROLLER, DECK HEIGHT
ROD, DECK HEIGHT
PIVOT BLOCK, PLASTIC
WELD, SHAFT, DECK LIFT, SW35 - BLK
NUT, 1/2-20 Hex Jam
WASHER, .515 X 1.00 X .25", CZ
BALL JOINT, 1/2-20, RH, MALE, METAL RACE
WASHER, 1/2 SAE
BOLT, 1/2-13 X 2" GD5 CZ
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
17
u
d
i
t
c
n
o
25-Feb-2022
Deck Lift Group S/N: 4001694245 and above
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
18
Mfg. No: 5901883
n
o
25-Feb-2022
Deck Lift Group S/N: 4001694245 and above
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
5413900AA
5413899AA
5104238
5102664
5020095
1702779
5025281
5104209
5025013X22
5025394
5021541
5100732
5025162
5102665
5025156
5025394
5025013X12
5025396
5109449
5102086
5025017X48
5021733
5025203X10
5413896AA
5100548
5025443
5403925AA
5413895AA
5061010
5025017X26
5025150
5100731
5104220
5100634
5413894AA
5025089
5105392
5104267
5025158
5025017X16
5107543
5109482
4
4
4
4
4
2
5
2
4
4
6
2
1
2
8
8
8
6
1
1
1
1
5
1
2
2
2
1
2
2
2
2
1
4
1
6
4
2
6
4
1
1
BRACKET, INNER TRUNION MNT - BLK
BRACKET, OUTER TRUNION MNT - BLK
PIVOT, DECK LIFT TRUNION, GREASABLE
ADJUSTER, DECK LIFT, CZ
GREASE FITTING, 1/4-28 Straight
JOINT-BALL .500-20 THD .500ID, CLR ZINC
WASHER, 5/8" SAE
ROD, DECK LIFT TIMING, 48-52
BOLT, 3/8-16 X 2-3/4" GD5 CZ
NUT, 3/8 - 16 HEX NYLOCK FLANGE
BUSHING, FLANGE
SPACER, .52 X 1.00 X 2.09 - SS
WASHER-1.00 HYDRO CUT
ROD, 1/2-20 X 5.50 TFL, CZ
WASHER, 3/8 SAE
NUT, 3/8 - 16 HEX NYLOCK FLANGE
BOLT, 3/8-16 X 1-1/2" GD5 CZ
NUT, Hex Flange, Nylock, 1/2-13
CRANK, HANDLE, W45
CAP, VINYL, 1.062 X 1.00 BLK
BOLT, 1/2-13 X 6" GD5 YZ
KNOB, PLASTIC, 1/2-13
PIN, COTTER, 1/8" X 1-1/4"
WELD, DECK LIFT LEVER, RH - BLK
WASHER, .390 X 1.50 X .109, YZ
BOLT, 3/8-16 X 3/4, PLT W/PATCH
PLATE, PIVOT BLOCK SUPPORT - BLK
WELD, DECK LIFT LEVER, LH - BLK
WASHER, FRICTION
BOLT, 1/2-13 X 3-1/4, HEX HD, GD5, CZ (SV)
WASHER, 1/2" USSZ
ROLLER, DECK HEIGHT
ROD, DECK HEIGHT
PIVOT BLOCK, PLASTIC
WELD, SHAFT, DECK LIFT, SW35 - BLK
NUT, 1/2-20 Hex Jam
WASHER, .515 X 1.00 X .25", CZ
BALL JOINT, 1/2-20, RH, MALE, METAL RACE
WASHER, 1/2 SAE
BOLT, 1/2-13 X 2" GD5 CZ
SPRING, FORWARD RETURN, FW15
SNAP RING, EXTERNAL, 15/16" SHAFT
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
19
u
d
i
t
c
n
o
25-Feb-2022
Electrical Group S/N: 4001694244 and below
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
20
Mfg. No: 5901883
n
o
25-Feb-2022
Electrical Group S/N: 4001694244 and below
REF NO
PART NO
QTY
DESCRIPTION
0010
0020
5104697
-----
1
1
0030
0040
0050
0060
0070
0080
0090
0100
0110
0120
0130
0140
0150
0160
0170
0180
0190
0220
0230
0240
0250
0260
0270
0280
0300
0310
0320
5020927
5021766
5101280
5100688
5415329AA
----5105301
5105300
5021670
5025271
5025270
5025271
5025179X6
5021029
5050927X39
5025010X6
5025154
5025126
5025179X4
5025249
5025355
5025013X8
5025156
5025394
5103809
5108764
5108762
1
1
1
1
1
1
1
1
1
3
2
2
3
8
1
2
3
2
1
1
2
2
2
2
1
1
1
5101589
5420445AA
5023499
5025179X6
1717050
5420940AA
5025271
1
1
2
2
1
1
2
PTO SWITCH, MOMENTARY, SMALL KNOB
HOUR METER, 2 CHANNEL
-(Refer to Note: *)
SWITCH, IGNITION, 6 POST
RELAY, 12 VOLT, 40 AMP
SWITCH, PLUNGER, NO/NC SNAP-IN, LOW PROFILE
BATTERY BOX, W/ DRAIN HOLE
WELD, MOUNT- BATTERY, W35 - BLK
BATTERY, 11U1L, 350 CCA
BATTERY CABLE,NEG, 42, 1/4-5/16
BATTERY CABLE, POS, 47, 1/4-5/16
STRAP, RUBBER
NUT, Hex, Nylon Lock, #10-24
MACHINE SCREW, Truss Head #10-24 x 1
NUT, Hex, Nylon Lock, #10-24
SCREW, #10-24 X 3/4" ROUND PHILLIPS
TIE, SELF-LOCKING, 12"
WIRE LOOM, 3/8 ID X 39 IN
BOLT, 1/4"-20 X 3/4" GD5 YZ
WASHER, 1/4 SAE
NUT, Hex, Serrated Flange, 1/4-20
SCREW, #10-24 X 1/2" ROUND PHILLIPS
BOLT, M8-1.25 X 20 MM GD 8.8
NUT, M8-1.25 Hex Serrated Flange
BOLT, 3/8-16 X 1" GD5 CZ
WASHER, 3/8 SAE
NUT, 3/8 - 16 HEX NYLOCK FLANGE
LIGHT, INDICATOR, PANEL, LED, RED
SWITCH, NC/NC/NO, 6300-001, DELTA
HARNESS, W45 WIRING W/ BRAKE SW
-(Refer to note: *)
SWITCH, PLUNGER, NO, SINGLE POLE, SNAP-IN
CLAMP, SWITCH, 3 POLE RAIL MNT - BLK
WASHER, #10 SAE
SCREW, #10-24 X 3/4" ROUND PHILLIPS
SWITCH, PLUNGER, N.O./N.C.
PLATE, SWITCH MOUNT, W45 - BLK
NUT, Hex, Nylon Lock, #10-24
0330
0350
0360
1001
1002
1003
1004
r
o
u
F
d
t
o
o
r
N ep
R
i
t
c
n
o
Footnotes:
Note: *If replacing the wire harness you must also order items #1001, 1002, 1003, and 1004.
*If replacing the hour meter call the Service Department at 1 (800) 933-6175 extention 2193.
Copyright © Briggs & Stratton. All Rights reserved
21
25-Feb-2022
Electrical Group S/N: 4001694245 and above
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
22
Mfg. No: 5901883
n
o
25-Feb-2022
Electrical Group S/N: 4001694245 and above
REF NO
PART NO
QTY
DESCRIPTION
0010
0020
0030
5050927X39
5104697
-----
1
1
1
0040
0050
0060
0070
0090
0100
0110
0120
0130
0140
0150
0160
0170
0200
0220
0230
0240
0250
0260
0270
0280
0300
0310
0320
0330
0400
0410
0420
5020927
5021766
5101280
5100688
----5105301
5105300
5021670
5025271
5025270
5021029
5025010X6
5025154
5025126
5025179X6
5025179X4
5025249
5025355
5025013X8
5025156
5025394
5103809
5108762
5021451
1717050
80004566
5421220AA
5421221AA
1
1
1
1
1
1
1
1
6
2
8
1
3
2
3
1
1
2
3
3
5
1
1
1
1
2
1
1
WIRE LOOM, 3/8 ID X 39 IN
PTO SWITCH, MOMENTARY, SMALL KNOB
HOUR METER, 2 CHANNEL
-(Refer to Note: *)
SWITCH, IGNITION, 6 POST
RELAY, 12 VOLT, 40 AMP
SWITCH, PLUNGER, NO/NC SNAP-IN, LOW PROFILE
BATTERY BOX, W/ DRAIN HOLE
BATTERY, 11U1L, 350 CCA
BATTERY CABLE,NEG, 42, 1/4-5/16
BATTERY CABLE, POS, 47, 1/4-5/16
STRAP, RUBBER
NUT, Hex, Nylon Lock, #10-24
MACHINE SCREW, Truss Head #10-24 x 1
TIE, SELF-LOCKING, 12"
BOLT, 1/4"-20 X 3/4" GD5 YZ
WASHER, 1/4 SAE
NUT, Hex, Serrated Flange, 1/4-20
SCREW, #10-24 X 3/4" ROUND PHILLIPS
SCREW, #10-24 X 1/2" ROUND PHILLIPS
BOLT, M8-1.25 X 20 MM GD 8.8
NUT, M8-1.25 Hex Serrated Flange
BOLT, 3/8-16 X 1" GD5 CZ
WASHER, 3/8 SAE
NUT, 3/8 - 16 HEX NYLOCK FLANGE
LIGHT, INDICATOR, PANEL, LED, RED
HARNESS, W45 WIRING W/ BRAKE SW
SWITCH, PLUNGER, N.O., BOLT-ON
SWITCH, PLUNGER, N.O./N.C.
BOLT,3/8-16X1.00,RD SH SQ NK,GR 5,ZC/CL
WELD, MNT BATTERY LOWER, OG, W45 - BLK
WELD, MNT BATTERY UPPER, OG, W45 - BLK
r
o
u
F
d
t
o
o
r
N ep
R
i
t
c
n
o
Footnotes:
*If replacing the hour meter call the Service Department at 1 (800) 933-6175 extention 2193.
Copyright © Briggs & Stratton. All Rights reserved
23
25-Feb-2022
Electrical Schematic - Charging Circuit S/N: 4001694244 and below
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
24
Mfg. No: 5901883
n
o
25-Feb-2022
Electrical Schematic - Charging Circuit S/N: 4001694244 and below
REF NO
PART NO
QTY
DESCRIPTION
5108762
5108762
1
HARNESS, W45 WIRING W/ BRAKE SW
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
25
u
d
i
t
c
n
o
25-Feb-2022
Electrical Schematic - Charging Circuit S/N: 4001694245 and above
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
26
Mfg. No: 5901883
n
o
25-Feb-2022
Electrical Schematic - Charging Circuit S/N: 4001694245 and above
REF NO
PART NO
QTY
DESCRIPTION
5108762
5108762
1
HARNESS, W45 WIRING W/ BRAKE SW
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
27
u
d
i
t
c
n
o
25-Feb-2022
Electrical Schematic - Cranking Circuit S/N: 4001694244 and below
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
28
Mfg. No: 5901883
n
o
25-Feb-2022
Electrical Schematic - Cranking Circuit S/N: 4001694244 and below
REF NO
PART NO
QTY
DESCRIPTION
5108762
5108762
1
HARNESS, W45 WIRING W/ BRAKE SW
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
29
u
d
i
t
c
n
o
25-Feb-2022
Electrical Schematic - Cranking Circuit S/N: 4001694245 and above
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
30
Mfg. No: 5901883
n
o
25-Feb-2022
Electrical Schematic - Cranking Circuit S/N: 4001694245 and above
REF NO
PART NO
QTY
DESCRIPTION
5108762
5108762
1
HARNESS, W45 WIRING W/ BRAKE SW
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
31
u
d
i
t
c
n
o
25-Feb-2022
Electrical Schematic - Ignition Grounding Circuit/Operator Presence S/N: 4001694244 and
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
32
Mfg. No: 5901883
n
o
25-Feb-2022
Electrical Schematic - Ignition Grounding Circuit/Operator Presence S/N: 4001694244 and
REF NO
PART NO
QTY
DESCRIPTION
5108762
5108762
1
HARNESS, W45 WIRING W/ BRAKE SW
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
33
u
d
i
t
c
n
o
25-Feb-2022
Electrical Schematic - Ignition Grounding Circuit/Operator Presence S/N: 4001694245 and
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
34
Mfg. No: 5901883
n
o
25-Feb-2022
Electrical Schematic - Ignition Grounding Circuit/Operator Presence S/N: 4001694245 and
REF NO
PART NO
QTY
DESCRIPTION
5108762
5108762
1
HARNESS, W45 WIRING W/ BRAKE SW
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
35
u
d
i
t
c
n
o
25-Feb-2022
Electrical Schematic - PTO Clutch Circuit S/N: 4001694244 and below
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
36
Mfg. No: 5901883
n
o
25-Feb-2022
Electrical Schematic - PTO Clutch Circuit S/N: 4001694244 and below
REF NO
PART NO
QTY
DESCRIPTION
5108762
5108762
1
HARNESS, W45 WIRING W/ BRAKE SW
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
37
u
d
i
t
c
n
o
25-Feb-2022
Electrical Schematic - PTO Clutch Circuit S/N: 4001694245 and above
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
38
Mfg. No: 5901883
n
o
25-Feb-2022
Electrical Schematic - PTO Clutch Circuit S/N: 4001694245 and above
REF NO
PART NO
QTY
DESCRIPTION
5108762
5108762
1
HARNESS, W45 WIRING W/ BRAKE SW
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
39
u
d
i
t
c
n
o
25-Feb-2022
Engine & PTO Group - Briggs & Stratton EFI (Remote Oil Tank) S/N: 4001694244 and
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
40
Mfg. No: 5901883
n
o
25-Feb-2022
Engine & PTO Group - Briggs & Stratton EFI (Remote Oil Tank) S/N: 4001694244 and
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
5412326A
5102865
5025585
5104236
5047033
5105090
5104355
-----
1
1
2
1
1
1
1
1
8
-----
1
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
5415276A
5415277A
5412353AA
5050407X8
273485
5023217
5025032
5025025X14
5025025X12
5025155
5025188
5025616
5025145X8
5025392
5025011X8
5025292
80003675
5025013X10
5025156
5025394
1
1
1
1
2
4
4
3
1
6
4
4
2
4
10
4
2
6
6
6
PLATE, CLUTCH ANCHOR - BLK
BOLT, CRANKSHAFT,7/16-20X2-3/4, GD8
BELLEVILLE WASHER 1.1875 X .442 X .089
PULLEY, CRANKSHAFT, 1.125ID X 4.50OD, OS
SPACER, 1.13 X 1.75 X 1.03, CZ
CLUTCH,WARNER,200 'lbs,1.13
MUFFLER, 26/28, B&S VANG, EFI TWR/WALK
ENGINE, B&S, EFI, OIL GUARD (49E877-0008-G1)
-(S/N: 4001858852 and below)
BRIGGS & STRATTON ENGINE, 49E877-0021-G1
-(S/N: 4001858853 and above)
PLATE, MUFFLER SUPPORT, LH, W35 - BLK
PLATE, MUFFLER SUPPORT, RH, W35 - BLK
WELD, MUFFLER GUARD - BLK
KEY, 1/4 SQ X 1
GASKET, EXHAUST
WASHER, 5/16 LIGHT LOCK
NUT, 5/16-18 HEX
BOLT, 5/16-24 X 1-3/4, GD8, PHOS
BOLT-HEX, 5/16-24 X 1-1/2", GD8, PHOS
WASHER, 5/16" SAE
WASHER, 5/16 INT. TOOTH LOCK
NUT, 5/16-24, TOP LOCK FLANGE, GD8 PHOS
BOLT, 5/16-18 X 1, CARRIAGE
NUT, 5/16-18 HEX NYLOCK FLANGE
BOLT, 5/16-18 X 1 GD5 CZ
WASHER, 5/16 F436 FLAT
NUT, 5/16-18, HEX, CNTR LK,ZINC PHOS/OIL
BOLT, 3/8-16 X 1-1/4" GD5 CZ
WASHER, 3/8 SAE
NUT, 3/8-16 HEX NYLOCK FLANGE
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
41
u
d
i
t
c
n
o
25-Feb-2022
Engine & PTO Group - Briggs & Stratton EFI (Remote Oil Tank) S/N: 4001694245 and
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
42
Mfg. No: 5901883
n
o
25-Feb-2022
Engine & PTO Group - Briggs & Stratton EFI (Remote Oil Tank) S/N: 4001694245 and
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
5412326A
5102865
5025585
5104236
5047033
5105090
5104355
-----
1
1
2
1
1
1
1
1
8
-----
1
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
5415276A
5415277A
5421108AA
5050407X8
273485
5023217
5025032
5025025X14
5025025X12
5025155
5025188
5025616
5025145X8
5025392
5025011X8
5025292
80003675
5025013X10
5025156
5025394
1
1
1
1
2
4
4
3
1
6
4
4
2
4
10
4
2
6
6
6
PLATE, CLUTCH ANCHOR - BLK
BOLT, CRANKSHAFT,7/16-20X2-3/4, GD8
BELLEVILLE WASHER 1.1875 X .442 X .089
PULLEY, CRANKSHAFT, 1.125ID X 4.50OD, OS
SPACER, 1.13 X 1.75 X 1.03, CZ
CLUTCH,WARNER,200 'lbs,1.13
MUFFLER, 26/28, B&S VANG, EFI TWR/WALK
ENGINE, B&S, EFI, OIL GUARD (49E877-0008-G1)
-(S/N: 4001858852 and below)
BRIGGS & STRATTON ENGINE, 49E877-0021-G1
-(S/N: 4001858853 and above)
PLATE, MUFFLER SUPPORT, LH, W35 - BLK
PLATE, MUFFLER SUPPORT, RH, W35 - BLK
WELD, MUFFLER/02, GUARD, W45 - BLK
KEY, 1/4 SQ X 1
GASKET, EXHAUST
WASHER, 5/16 LIGHT LOCK
NUT, 5/16-18 HEX
BOLT, 5/16-24 X 1-3/4, GD8, PHOS
BOLT-HEX, 5/16-24 X 1-1/2", GD8, PHOS
WASHER, 5/16" SAE
WASHER, 5/16 INT. TOOTH LOCK
NUT, 5/16-24, TOP LOCK FLANGE, GD8 PHOS
BOLT, 5/16-18 X 1, CARRIAGE
NUT, 5/16-18 HEX NYLOCK FLANGE
BOLT, 5/16-18 X 1 GD5 CZ
WASHER, 5/16 F436 FLAT
NUT, 5/16-18, HEX, CNTR LK,ZINC PHOS/OIL
BOLT, 3/8-16 X 1-1/4" GD5 CZ
WASHER, 3/8 SAE
NUT, 3/8-16 HEX NYLOCK FLANGE
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
43
u
d
i
t
c
n
o
25-Feb-2022
Engine Deck Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
44
Mfg. No: 5901883
n
o
25-Feb-2022
Engine Deck Group
REF NO
PART NO
QTY
DESCRIPTION
0010
0020
0030
0040
0050
0060
0070
0080
0090
0100
0110
0120
0130
0140
0150
0160
0180
0190
0200
0210
0220
5102677
5412030AA
5025145X8
5025392
5025498
5103944
5420466AA
----5025394
80005327
5025146X12
5108724
5420312B
5420214AA
5420213AA
5108918
5025155
5025391
5025010X6
5025288
80002736
2
1
2
2
2
1
2
4
8
8
4
1
1
1
2
1
2
5
5
5
2
GROMMET, 1-1/2" ID FOR 1/4" METAL
PLATE, FAN GUARD - BLK
BOLT, 5/16-18 X 1, CARRIAGE, GD5, CZ
NUT, 5/16-18 HEX NYLOCK FLANGE NUT
5/16" PUSH-ON NUT RETAINER, STL, CZ
GROMMET, 7/8"ID, 1/4" THICK STK
PLATE, TRANS PROTECTOR, W45 - BLK
BOLT,3/8-16X1.000,RND HD CRRG,ZINC/CLEAR
NUT, 3/8 - 16 HEX NYLOCK FLANGE
RETAINER,3/8,PUSHNUT,ZINC/CLEAR
BOLT, 3/8-16 X 1-1/2, CARRIAGE, GD5, CZ
FLAP, RUBBER, 3/16 X 6.75 X 26.00
WELD, ENGINE DECK, W45 - RED
WELD, LOWER FLAP MOUNT - BLK
WELD, UPPER FLAP MOUNT - BLK
ROD, 5/16 X 26.375, CZ
WASHER, 5/16" SAE
NUT, 1/4-20 Hex Nylock Flange
BOLT, 1/4"-20 X 3/4" GD5 YZ
WASHER, 1/4" Fender
PIN, 3/32 X 0.750, COT, ZINC/CLEAR
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
45
u
d
i
t
c
n
o
25-Feb-2022
Engine Remote Oil Tank, Hoses, & Mount Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
46
Mfg. No: 5901883
n
o
25-Feb-2022
Engine Remote Oil Tank, Hoses, & Mount Group
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5420397AA
5415327A
5415916A
595945
1
1
1
1
4
84006647
1
5
6
7
8
9
10
11
12
13
14
15
16
18
19
20
197546
5105177
5105318
5105317
5105492
----5023131
5025165
5025013X14
5025394
5025392
5021392
----5050862X8
84006650
2
1
1
1
1
0
3
3
3
5
12
2
1
1
1
84006649
1
595943
1
84006661
1
5025145X8
5025498
5025156
5025013X10
5025155
5025011X8
84007094
595931
595934
5105281
5105282
2
2
2
2
12
10
1
1
1
1
1
PLATE, LOWER TANK MOUNT, W45 - BLK
TANK MOUNT, TOP, W35 - BLK
WELD, TANK GUARD, W35 - BLK
TANK, Oil
-(Refer to Note: *)(S/N: 4001858852 and below)
TANK, Oil
-(Refer to Note: *)(S/N: 4001858853 and above)
MNT, VBRTN, RBBR
VALVE, OIL DRAIN, M16X1.5 TO 1/2"
NUT, HEX, M16-1.5, DAPCO 4071
OIL DRAIN CAP, OIL GUARD, DAPCO 4692
HOSE, Formed, Oil Guard
Refer to: Electrical Group
MOUNT, ISO, BOTTOM, RAD 5000Z-DIESEL
WASHER, 3/8" Fender
BOLT, 3/8-16 X 1-3/4" GD5 CZ
NUT, 3/8 - 16 HEX NYLOCK FLANGE
NUT, 5/16-18 HEX NYLOCK FLANGE NUT
CLAMP, #6 HOSE, STAINLESS
TIE, Cable, Yellow 7.6"
WIRE LOOM, 3/4 ID X 8.00" LG
HOSE, OIL SUPPLY
-(Refer to Note: *)(S/N: 4001858852 and below)
HOSE, OIL SUPPLY
-(Refer to Note: *)(S/N: 4001858853 and above)
HOSE, Oil Vent
-(Refer to Note: *)
HOSE, OIL SCAVENGE
-(Refer to Note: *)
BOLT, 5/16-18 X 1, CARRIAGE, GD5, CZ
5/16" PUSH-ON NUT RETAINER, STL, CZ
WASHER, 3/8 SAE
BOLT, 3/8-16 X 1-1/4" GD5 CZ
WASHER, 5/16" SAE
BOLT, 5/16-18 X 1" GRD5 YZ
FILTER, Oil
CAP, Oil Fill
DIPSTICK
OIL, 15W-50, SYNTHETIC, CASE X 12- 1QT
OIL, 15W-50, SYNTHETIC, CASE X 4- 5QT
20
21
22
23
24
25
26
27
28
29
30
31
32
33
r
o
u
F
d
t
o
o
r
N ep
R
i
t
c
n
o
Footnotes:
Note: *Order Oil Guard replacement parts from your Authorized Briggs & Stratton Engine Service Provider
Copyright © Briggs & Stratton. All Rights reserved
47
25-Feb-2022
Front Frame Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
48
Mfg. No: 5901883
n
o
25-Feb-2022
Front Frame Group
REF NO
PART NO
QTY
DESCRIPTION
0010
0010-10
5422126B
5020883
1
2
0020
0030
0040
0050
0060
0070
0080
0090
0100
0110
0120
0130
0150
0160
0170
5025396
5025017X10
5025158
5401759B
5020884
5021072
5025449
5025448
5020095
5025457
5109845
5420467B
5022308
5025011X8
5025337
6
6
6
2
4
2
4
2
2
2
2
1
4
4
4
WELD, FRONT FRAME, W45, 478/52 - RED
CUP, BEARING (SV)
-(SV)
NUT, Hex Flange, Nylock, 1/2-13
BOLT, 1/2-13 X 1-1/4 GD5 CZ
WASHER, 1/2 SAE
WELD., FRONT CASTER YOKES - RED
BEARING, TAPERED ROLLER, 1"
SEAL, Grease
WASHER, BELLEVILLE - 1.500 X .755
NUT, 3/4-16, HEX JAM NYLON LOCK
GREASE FITTING, 1/4-28 Straight
BOLT, 1/4-28 X 1/2, GD5 YZ
CAP, GREASE, LOW PROFILE
PLATE, FRONT GUARD, W45 - RED
BODY CLIP, 5/16-18 7GA. MATERIAL
BOLT, 5/16-18 X 1" GRD5 YZ
WASHER, 5/16" USS
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
49
u
d
i
t
c
n
o
25-Feb-2022
Fuel Supply Hose and Evap Group (No Canister)
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
50
Mfg. No: 5901883
n
o
25-Feb-2022
Fuel Supply Hose and Evap Group (No Canister)
REF NO
PART NO
QTY
DESCRIPTION
0010
0020
0040
0050
0130
0140
0150
0160
1000
5050831X29P5
93807
7700552X15P5
7700552X20P5
5103062
7700552X4P5
80025019
5021030
5021178X3
1
2
1
1
1
1
1
2
1
HOSE, 1/4" FUEL, 29.50"
CLAMP, Hose
HOSE, VAPOR, 5MM ID, 15.50 LG
HOSE, VAPOR, 5MM ID, 20.50 LG
FITTING, 3/16" TEE, BARB TYPE, HDPE
HOSE, VAPOR, 5MM ID, 4.50 LG
FILTER, FUEL
TIE, SELF-LOCKING, 6"
FUEL FILTER (SV)
-(SV)
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
51
u
d
i
t
c
n
o
25-Feb-2022
Fuel Tank and Mount Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
52
Mfg. No: 5901883
n
o
25-Feb-2022
Fuel Tank and Mount Group
REF NO
PART NO
QTY
DESCRIPTION
0010
0010-10
5102833
5102833X1
1
1
0020
0030
0040
0050
0060
0070
0080
0090
0100
0110
0120
0130
0140
0150
5108752
5025013X8
5025156
5025394
5403445AA
5025010X10
5025391
5025154
5100810
5021029
5413950AA
5420158AA
5025127
5025055X16
1
5
5
5
2
2
2
2
2
1
1
1
1
1
TANK, 4.625 GAL, W DROP TUBE/VENT
GROMMET
-(Grommet for fuel tank 5102833)
FUEL CAP, 3.5", MANAGED VENT OUT, 12" RT
BOLT, 3/8-16 X 1" GD5 CZ
WASHER, 3/8 SAE
NUT, 3/8 - 16 HEX NYLOCK FLANGE
STRAP, FUEL TANK
BOLT, 1/4-20 X 1-1/4 GD5 CZ
NUT, 1/4-20 Hex Nylock Flange
WASHER, 1/4 SAE
PAD, RUBBER MOUNT
TIE, SELF-LOCKING, 12"
WELD, FUEL TANK, MOUNT, LOWER, W35 - BLK
WELD, TANK MOUNT, W45 - BLK
NUT, 5/16-18 HEX SERRATED FLANGE (SMALL)
BOLT, 5/16-18 X 2 GD5 TFL, CZ
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
53
u
d
i
t
c
n
o
25-Feb-2022
Handle Bar Group S/N: 4001694244 and below
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
54
Mfg. No: 5901883
n
o
25-Feb-2022
Handle Bar Group S/N: 4001694244 and below
REF NO
PART NO
QTY
DESCRIPTION
0010
0020
0030
0040
0060
0070
5104659
5025013X8
5025293
5025394
5025011X8
5022665
2
6
6
6
4
4
0080
5025010X6
2
0090
5025154
2
0100
5025391
2
0110
0120
0130
0140
0150
0160
5420392B
5419312AA
5025392
5025292
5102542
5100184
1
1
2
2
1
1
0170
5104657
1
GRIP, FOAM, .940" X 4.62" X .187"
BOLT, 3/8-16 X 1" GD5 CZ
WASHER, 3/8" GR. 9 FLAT
NUT, 3/8 - 16 HEX NYLOCK FLANGE
BOLT, 5/16-18 X 1" GRD5 YZ
BODY CLIP, 1/4-20 X 1/2" DEEP
-(For securing the oil cooler mount.)
BOLT, 1/4"-20 X 3/4" GD5 YZ
-(For securing the throttle control.)
WASHER, 1/4 SAE
-(For securing the throttle control.)
NUT, 1/4-20 Hex Nylock Flange
-(For securing the throttle control.)
WELD, HANDLEBAR, W45 - RED
BAR, SULKY GUARD, W25-W35 - BLK
NUT, 5/16-18 HEX NYLOCK FLANGE NUT
WASHER, 5/16 GRADE 9, FLAT
GROMMET, 5/8 ID X 1/8 MATERIAL
CABLE, CHOKE CONTROL, 43.5"
-(Kawasaki powered models only)
CABLE, THROTTLE, 43" DETENTED
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
55
u
d
i
t
c
n
o
25-Feb-2022
Handle Bar Group S/N: 4001694245 and above
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
56
Mfg. No: 5901883
n
o
25-Feb-2022
Handle Bar Group S/N: 4001694245 and above
REF NO
PART NO
QTY
DESCRIPTION
0010
0020
0030
0040
0060
0070
5104659
5025013X8
5025293
5025394
5025011X8
5022665
2
6
6
6
4
4
0080
5025010X6
2
0090
5025154
2
0100
5025391
2
0110
0120
0130
0140
0150
0160
5420998B
5419312AA
5025392
5025292
5022649
5100184
1
1
2
2
1
1
0170
5104657
1
GRIP, FOAM, .940" X 4.62" X .187"
BOLT, 3/8-16 X 1" GD5 CZ
WASHER, 3/8" GR. 9 FLAT
NUT, 3/8 - 16 HEX NYLOCK FLANGE
BOLT, 5/16-18 X 1" GRD5 YZ
BODY CLIP, 1/4-20 X 1/2" DEEP
-(For securing the oil cooler mount.)
BOLT, 1/4"-20 X 3/4" GD5 YZ
-(For securing the throttle control.)
WASHER, 1/4 SAE
-(For securing the throttle control.)
NUT, 1/4-20 Hex Nylock Flange
-(For securing the throttle control.)
WELD, HANDLE BAR, STD, W45 - RED
BAR, SULKY GUARD, W25-W35 - BLK
NUT, 5/16-18 HEX NYLOCK FLANGE NUT
WASHER, 5/16 GRADE 9, FLAT
BODY CLIP, 3/8-16 X .688" DEEP
CABLE, CHOKE CONTROL, 43.5"
-(Kawasaki powered models only)
CABLE, THROTTLE, 43" DETENTED
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
57
u
d
i
t
c
n
o
25-Feb-2022
Hydraulic Group - Hoses and Loom
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
58
Mfg. No: 5901883
n
o
25-Feb-2022
Hydraulic Group - Hoses and Loom
REF NO
PART NO
QTY
DESCRIPTION
0001
0110
0160
0170
0180
0230
0290
0370
0380
0390
0400
0410
0420
0430
0450
0460
0470
0480
0490
0500
0530
0540
1000
5050860X32
5025474
5050857X24
5050862X20
5100772
5023268
5108746
5108540X42
5108541X15P5
5108541X23P5
5108539X34P5
5108747X9
5050869X9
5050860X14P5
5050861X40
5050861X15
5050861X22
5050861X32
5050861X13
5050861X30
5108736
93807
-----
1
4
2
2
8
4
2
1
1
1
1
1
1
1
1
1
1
1
1
1
8
4
1
HOSE, 3/8" PUSH-LOCK, 32.00"
CLAMP, HOSE, .75 FREE DIA.
HOSE, 1/2" PUSH-ON, 24.00"
WIRE LOOM, 3/4 ID X 20 IN
TIE, SELF-LOCKING, 15"
CLAMP, Hose
FITTING, TEE, HOSE, 3/8-3/8-1/4
HOSE, 3/8"" PUSH-LOCK, BLUE 42.00
HOSE, 3/8" PUSH-LOCK, GREEN 15.50"
HOSE, 3/8" PUSH-LOCK, GREEN 23.50"
HOSE, 3/8" PUSH-LOCK, RED 34.50
HOSE, 1/4" PUSH-LOCK, GREEN, 9.00"
HOSE, 1/4" PUSH-LOCK, 9.00"
HOSE, 3/8 PUSH LOCK, 14.50"
WIRE LOOM, 5/8 ID X 40 IN
WIRE LOOM, 5/8" ID. 15" LONG
WIRE LOOM, 5/8 ID X 22 IN
WIRE LOOM 5/8 ID X 32 IN
WIRE LOOM 5/8 ID X 13 IN
WIRE LOOM 5/8 ID X 30 IN
CLAMP, HOSE, 5/8", FI TYPE
CLAMP, Hose
Refer to: Hydraulic Group
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
59
u
d
i
t
c
n
o
25-Feb-2022
Hydraulic Group - Transaxle Selector Valve
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
60
Mfg. No: 5901883
n
o
25-Feb-2022
Hydraulic Group - Transaxle Selector Valve
REF NO
PART NO
QTY
DESCRIPTION
0140
0150
0250
0260
0270
0280
0300
0310
0350
5025154
5025391
847378
5023358
5022205
5108754
5108765
1960252
5420417AA
1
3
1
1
1
1
1
2
1
WASHER, 1/4 SAE
NUT, 1/4-20 Hex Nylock Flange
CAP, DUST
VALVE, FUEL STRAIGHT, OUTLET
EYE BOLT, 1/4-20 X 2.5, 1THRD, .5EYE,CZ
SPRING, COMP, .261 ID X .5 OD X 1" LG
CLAMP, HOSE, VALVE BOOT
BOLT-RD HD SH SQ NK 1/4-20X0. 625 G5 BLK
PLATE, PURGE VALVE MOUNT - BLK
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
61
u
d
i
t
c
n
o
25-Feb-2022
Hydraulic Group S/N: 4001694244 and below
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
62
Mfg. No: 5901883
n
o
25-Feb-2022
Hydraulic Group S/N: 4001694244 and below
REF NO
PART NO
QTY
DESCRIPTION
0010
0020
0030
0040
0050
0060
0070
0080
0090
0100
0110
0130
0140
0150
0160
0170
0190
0200
0210
0220
0320
0330
0340
0520
0550
5108694
5108693
5025392
5025011X22
5025145X18
5025155
5104532
5020047
5022481
5100473
5025474
5025010X6
5025154
5025391
5050857X24
5050862X20
5103687
5101721
5108782
5108783
5101215
5025010X16
5420446AA
5023263
5022665
1
1
8
4
4
4
2
2
2
2
4
8
15
13
2
2
2
2
2
2
4
4
1
1
4
TRANSAXLE, ZT3400, Z9-YMFE-SL5C-1UXX
TRANSAXLE, ZT3400, Z9-WMFE-SL5B-1UXX
NUT, 5/16-18 HEX NYLOCK FLANGE NUT
BOLT, 5/16-18 X 2-3/4, GD 5, YZ
BOLT, 5/16-18 X 2-1/4, CARRIAGE, GD5, CZ
WASHER, 5/16" SAE
ROD, HYDRO RELEASE, WALKS
COLLAR, 5/16" Set
COLLAR, Set, 1/4"
RESERVOIR, HYDRO OIL, 350 ML
CLAMP, HOSE, .75 FREE DIA.
BOLT, 1/4"-20 X 3/4" GD5 YZ
WASHER, 1/4 SAE
NUT, 1/4-20 Hex Nylock Flange
HOSE, 1/2" PUSH-ON, 24.00"
WIRE LOOM, 3/4 ID X 20 IN
FITTING, #6 O-RING 1/2 HOSE BARB, STRAIGHT
OIL COOLER, .75 X 11.0 X 24 PLATES
FITTING, 90 DEG, 3/8"HOSE-9/16-18 O-RING
FITTING, 25 DEG, 3/8"HOSE-9/16-18 O-RING
SPACER, .26 X .38 X 1.250, YZ
BOLT, 1/4-20 X 2”, GD5
PLATE, COOLER MOUNT, W45 - BLK
CLAMP, VINYL INSULATED, 1.75
BODY CLIP, 1/4-20 X 1/2" DEEP
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
63
u
d
i
t
c
n
o
25-Feb-2022
Hydraulic Group S/N: 4001694245 and above
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
64
Mfg. No: 5901883
n
o
25-Feb-2022
Hydraulic Group S/N: 4001694245 and above
REF NO
PART NO
QTY
DESCRIPTION
0010
0020
0030
0040
0050
0060
0070
0080
0090
0100
0110
0130
0140
0150
0160
0170
0190
0200
0210
0220
0320
0330
0340
0520
0550
0560
0570
0580
5108694
5108693
5025392
5025011X22
5025145X18
5025155
5104532
5020047
5022481
5100473
5025474
5025010X6
5025154
5025391
5050857X24
5050862X20
5103687
5101721
5108782
5108783
5101215
5025010X16
5420446AA
5023263
5022665
1960715
5022665
5420990AA
1
1
8
4
4
4
2
2
2
2
4
8
15
13
2
2
2
2
2
2
4
4
1
1
4
1
1
1
TRANSAXLE, ZT3400, Z9-YMFE-SL5C-1UXX
TRANSAXLE, ZT3400, Z9-WMFE-SL5B-1UXX
NUT, 5/16-18 HEX NYLOCK FLANGE NUT
BOLT, 5/16-18 X 2-3/4, GD 5, YZ
BOLT, 5/16-18 X 2-1/4, CARRIAGE, GD5, CZ
WASHER, 5/16" SAE
ROD, HYDRO RELEASE, WALKS
COLLAR, 5/16" Set
COLLAR, Set, 1/4"
RESERVOIR, HYDRO OIL, 350 ML
CLAMP, HOSE, .75 FREE DIA.
BOLT, 1/4"-20 X 3/4" GD5 YZ
WASHER, 1/4 SAE
NUT, 1/4-20 Hex Nylock Flange
HOSE, 1/2" PUSH-ON, 24.00"
WIRE LOOM, 3/4 ID X 20 IN
FITTING, #6 O-RING 1/2 HOSE BARB, STRAIGHT
OIL COOLER, .75 X 11.0 X 24 PLATES
FITTING, 90 DEG, 3/8"HOSE-9/16-18 O-RING
FITTING, 25 DEG, 3/8"HOSE-9/16-18 O-RING
SPACER, .26 X .38 X 1.250, YZ
BOLT, 1/4-20 X 2”, GD5
PLATE, COOLER MOUNT, W45 - BLK
CLAMP, VINYL INSULATED, 1.75
BODY CLIP, 1/4-20 X 1/2" DEEP
SCREW-TRUSS HD TORX DR 1/4-20X0.750 BLK
BODY CLIP, 1/4-20 X 1/2" DEEP
PLATE, GUARD, COOLER W45 - BLK
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
65
u
d
i
t
c
n
o
25-Feb-2022
Motion Control Group - Forward Speed Control, Operator Presence, and Foot Pedal S/N:
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
66
Mfg. No: 5901883
n
o
25-Feb-2022
Motion Control Group - Forward Speed Control, Operator Presence, and Foot Pedal S/N:
REF NO
PART NO
QTY
DESCRIPTION
0010
0020
0030
0040
0050
0060
0070
0080
0090
0110
0130
0220
0230
0240
0250
0260
0270
0290
0300
0310
0320
0330
0340
0350
0360
0370
0520
0530
0540
0550
0620
0640
0650
0660
0670
0720
0750
0760
0770
0790
0800
0810
5412891AA
5104216AA
5025010X6
----5025391
5047199
5101640
5021683
5022392
5025394
5104164
5025288
5101274
5409272
5104176
5025164
5104221
5414516AA
5010546
5021104
7090095
5101242
5104201AA
5104202AA
5101215
5025010X14
5025203X10
5104270
5025154
5104262
5025212X7
5025035
5025317
5025013X14
----5025010X6
5025155
5025013X24
5025156
5025529
5420287AA
5420222AA
1
1
9
2
17
3
1
3
1
7
1
1
1
1
2
1
1
1
2
2
2
2
1
1
2
2
4
2
12
2
2
7
1
1
2
3
2
1
2
1
1
1
WELD, SPEED CONTROL, SW35 - BLK
BAR, SPEED CONTROL - BLK
BOLT, 1/4"-20 X 3/4" GD5 YZ
SCREW-TRUSS HD TORX DR 1/4-20X0.750 ZC/C
NUT, 1/4-20 Hex Nylock Flange
SPACER, .38 x .50 x .75
SPACER, .38 X .50 X .50, YZ
BALL JOINT, 3/8-24 FEMALE
BALL JOINT, 3/8-24 LH, Female
NUT, 3/8 - 16 HEX NYLOCK FLANGE
ROD, 3/8-24, 19.00, LH-RH CZ
WASHER, 1/4" Fender
SPACER, .26 X .50 X 1.00 YZ
PLATE, FRICTION CONTROL, SS
PAD, T-712 FRICTION MATERIAL
WASHER, 5/16" Fender
SPRING, COMP, .40 X .60 X 2.25, BLACK
WELD, OPC ROD, WALKBEHIND - BLK
COLLAR, 3/8" Set
CLEVIS, 1/4-28, Plastic
NUT, 1/4-28 Hex, GR 5
ROD, OPC LINK, SNP PRO WB
FLAP, OPS - BLK
FLAP, OPS - BLK
SPACER, .26 X .38 X 1.250, YZ
BOLT, 1/4 X 20 X 1-3/4 GD5 YZ
PIN, COTTER, 1/8" X 1-1/4"
BEARING, 5/8" FLANGED, PLASTIC BALL
WASHER, 1/4 SAE
PEDAL, Rubber
PIN, CLEVIS, 1/4 X 7/8, PLATED
NUT, 3/8-24 HEX (SV)
NUT, 3/8-24 Hex, LH
BOLT, 3/8-16 X 1-3/4" GD5 CZ
HHCS, 1/4-20 X 0.625, GR5, ZINC/CLEAR
BOLT, 1/4"-20 X 3/4" GD5 YZ
WASHER, 5/16" SAE
BOLT, 3/8-16 X 3" GD5 CZ
WASHER, 3/8 SAE
WING NUT, 5/16-18, CZ
WELD, FOOT PEDAL, W45 - BLK
PLATE, SWITCH MOUNT, W45 - BLK
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
67
u
d
i
t
c
n
o
25-Feb-2022
Motion Control Group - Forward Speed Control, Operator Presence, and Foot Pedal S/N:
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
68
Mfg. No: 5901883
n
o
25-Feb-2022
Motion Control Group - Forward Speed Control, Operator Presence, and Foot Pedal S/N:
REF NO
PART NO
QTY
DESCRIPTION
0020
0030
0050
0060
0070
0080
0090
0110
0130
0220
0230
0240
0250
0260
0270
0290
0300
0310
0320
0330
0340
0350
0360
0370
0520
0530
0540
0620
0640
0650
0670
0750
0760
0770
0790
0800
0830
0840
5070
5080
5104216AA
5025010X6
5025391
5047199
5101640
5021683
5022392
5025394
5104164
5025288
5101274
5409272
5104176
5025164
5104221
5414516AA
5010546
5021104
7090095
5101242
5104201AA
5104202AA
5101215
5025010X14
5025203X10
5104270
5025154
5025212X7
5025035
5025317
----5025155
5025013X24
5025156
5025529
5420287AA
80003522
5101123
5421102AA
5420940AA
1
3
14
3
1
3
1
7
1
1
1
1
2
1
1
1
2
2
2
2
1
1
2
2
4
2
8
2
9
1
8
5
2
2
1
1
2
2
1
1
BAR, SPEED CONTROL - BLK
BOLT, 1/4"-20 X 3/4" GD5 YZ
NUT, 1/4-20 Hex Nylock Flange
SPACER, .38 x .50 x .75
SPACER, .38 X .50 X .50, YZ
BALL JOINT, 3/8-24 FEMALE
BALL JOINT, 3/8-24 LH, Female
NUT, 3/8 - 16 HEX NYLOCK FLANGE
ROD, 3/8-24, 19.00, LH-RH CZ
WASHER, 1/4" Fender
SPACER, .26 X .50 X 1.00 YZ
PLATE, FRICTION CONTROL, SS
PAD, T-712 FRICTION MATERIAL
WASHER, 5/16" Fender
SPRING, COMP, .40 X .60 X 2.25, BLACK
WELD, OPC ROD, WALKBEHIND - BLK
COLLAR, 3/8" Set
CLEVIS, 1/4-28, Plastic
NUT, 1/4-28 Hex, GR 5
ROD, OPC LINK, SNP PRO WB
FLAP, OPS - BLK
FLAP, OPS - BLK
SPACER, .26 X .38 X 1.250, YZ
BOLT, 1/4 X 20 X 1-3/4 GD5 YZ
PIN, COTTER, 1/8" X 1-1/4"
BEARING, 5/8" FLANGED, PLASTIC BALL
WASHER, 1/4 SAE
PIN, CLEVIS, 1/4 X 7/8, PLATED
NUT, 3/8-24 HEX (SV)
NUT, 3/8-24 Hex, LH
HHCS, 1/4-20 X 0.625, GR5, ZINC/CLEAR
WASHER, 5/16" SAE
BOLT, 3/8-16 X 3" GD5 CZ
WASHER, 3/8 SAE
WING NUT, 5/16-18, CZ
WELD, FOOT PEDAL, W45 - BLK
HHCS, 3/8-16 X 2.00, GR5, ZINC/CLEAR
BEARING, 1/2 FLANGED, PLASTIC BALL
WELD, SPEED CONTROL PIVOT, W45 - BLK
PLATE, SWITCH MOUNT, W45 - BLK
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
69
u
d
i
t
c
n
o
25-Feb-2022
Motion Control Group - Steering Levers S/N: 4001694244 and below
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
70
Mfg. No: 5901883
n
o
25-Feb-2022
Motion Control Group - Steering Levers S/N: 4001694244 and below
REF NO
PART NO
QTY
DESCRIPTION
0110
0120
0140
0150
0160
0170
0180
0190
0200
0210
0280
0380
0390
0400
0410
0420
0430
0440
0450
0460
0470
0480
0490
0500
0510
0520
0560
0570
0580
0590
0600
0610
0680
0690
0700
0750
5025394
5104229
5025401
5104375
5103022
5102773
5104374
5025034
5104351
5414411AA
5025392
5102556AA
5109888
5102463
5104494
5104493
5104159
5109885
5023212
5025033
5025011X18
5025011X16
5414184AA
5102003
5104171
5025203X10
5412050AA
5025015X6
5025044
5025013X8
5025426
5025089
5020095
5414183AA
5025055X10
5025155
7
2
2
4
2
2
2
4
2
2
10
2
2
6
4
4
4
2
4
4
4
2
1
4
2
4
2
2
2
2
1
2
2
1
4
2
NUT, 3/8 - 16 HEX NYLOCK FLANGE
ROD, CONTROL SYSTEM, WALK
WASHER, 3/8" USS
FLANGED BUSHING, 3/8IDX.63ODX.8125FL
TRUNION, 1/2" POSTS, STAINLESS
BUSHING, .38ID X .47 OD X .38L, FL
SPRING,COMP,.645IDX8.00LGX.080WR,BLK E-C
NUT, 3/8-16 HEX, YZ
SPACER, .33 X 1.00 X .88, CZ
TAB, PIVOT, W35 - BLK
NUT, 5/16-18 HEX NYLOCK FLANGE NUT
HANDLE, REVERSING - BLK
BOLT, 3/8-16 X 1/2, 1.00 SHOULDER, CZ
SPACER, .33 X .50 X .25, PM, CZ
BALL JOINT 5/16-24 LH FEMALE BRONZE RACE
BALL JOINT 5/16-24 RH FEMALE BRONZE RACE
ROD, 5/16-24 X 15.48, LH-RH, CZ
SPACER, .325 X .496 X 1.000, CZ
NUT, 5/16-24 HEX, LH
NUT, Hex, 5/16-24
BOLT, 5/16-18 X 2-1/4" GD5 YZ
BOLT, 5/16-18 X 2" GD5 YZ
WELD, W35 CONTROL PIVOT, RH - BLK
BEARING, .375" ID X .875" OD X .341" THK
ROD, 3/8 X 12, HEADED - CZ
PIN, COTTER, 1/8" X 1-1/4"
PLATE, CONTROL MOUNT, WALK - BLK
BOLT, 7/16-14 X 3/4, GD 5 YZ
NUT, 7/16-14 HEX TOP LOCK
BOLT, 3/8-16 X 1" GD5 CZ
BOLT, 1/2-20 X 2-1/2, FLT
NUT, 1/2-20 Hex Jam
GREASE FITTING, 1/4-28 Straight
WELD, W35 CONTROL PIVOT, RH - BLK
BOLT, 5/16-18 x 1-1/4" TFL GD 5
WASHER, 5/16" SAE
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
71
u
d
i
t
c
n
o
25-Feb-2022
Motion Control Group - Steering Levers S/N: 4001694245 and above
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
72
Mfg. No: 5901883
n
o
25-Feb-2022
Motion Control Group - Steering Levers S/N: 4001694245 and above
REF NO
PART NO
QTY
DESCRIPTION
0110
0120
0140
0150
0160
0170
0180
0190
0200
0210
0280
0380
0390
0400
0410
0420
0430
0440
0450
0460
0470
0480
0490
0500
0510
0520
0560
0570
0580
0590
0640
0680
0690
0700
0750
0770
0850
5030
5040
5050
5060
5100
5025394
5104229
5025401
5104375
5103022
5102773
5104374
5025034
5104351
5414411AA
5025392
5102556AA
5109888
5102463
5104494
5104493
5104159
5109885
5023212
5025033
5025011X18
5025011X16
5414184AA
5102003
5104171
5025203X10
5412050AA
5025015X6
5025044
5025013X6
5025035
5020095
5414183AA
5025055X10
5025155
5025156
5109457
5025292
5021773
5025293
5025058X18
5022649
7
2
2
4
2
2
2
5
2
2
8
2
2
6
4
4
2
2
2
2
4
2
1
4
2
4
2
2
2
2
9
2
1
4
5
2
2
8
4
1
1
1
NUT, 3/8 - 16 HEX NYLOCK FLANGE
ROD, CONTROL SYSTEM, WALK
WASHER, 3/8" USS
FLANGED BUSHING, 3/8IDX.63ODX.8125FL
TRUNION, 1/2" POSTS, STAINLESS
BUSHING, .38ID X .47 OD X .38L, FL
SPRING,COMP,.645IDX8.00LGX.080WR,BLK E-C
NUT, 3/8-16 HEX, YZ
SPACER, .33 X 1.00 X .88, CZ
TAB, PIVOT, W35 - BLK
NUT, 5/16-18 HEX NYLOCK FLANGE NUT
HANDLE, REVERSING - BLK
BOLT, 3/8-16 X 1/2, 1.00 SHOULDER, CZ
SPACER, .33 X .50 X .25, PM, CZ
BALL JOINT 5/16-24 LH FEMALE BRONZE RACE
BALL JOINT 5/16-24 RH FEMALE BRONZE RACE
ROD, 5/16-24 X 15.48, LH-RH, CZ
SPACER, .325 X .496 X 1.000, CZ
NUT, 5/16-24 HEX, LH
NUT, Hex, 5/16-24
BOLT, 5/16-18 X 2-1/4" GD5 YZ
BOLT, 5/16-18 X 2" GD5 YZ
WELD, W35 CONTROL PIVOT, RH - BLK
BEARING, .375" ID X .875" OD X .341" THK
ROD, 3/8 X 12, HEADED - CZ
PIN, COTTER, 1/8" X 1-1/4"
PLATE, CONTROL MOUNT, WALK - BLK
BOLT, 7/16-14 X 3/4, GD 5 YZ
NUT, 7/16-14 HEX TOP LOCK
BOLT, 3/8-16 X 3/4" GD5 CZ
NUT, 3/8-24 HEX (SV)
GREASE FITTING, 1/4-28 Straight
WELD, W35 CONTROL PIVOT, RH - BLK
BOLT, 5/16-18 x 1-1/4" TFL GD 5
WASHER, 5/16" SAE
WASHER, 3/8 SAE
ROD, 1/2 HEX, 5/16-24 X 15.50,LH-RH, CZ
WASHER, 5/16 GRADE 9, FLAT
SPRING-COMP, .438ID X 1.75LG X .137WR
WASHER, 3/8" GR. 9 FLAT
BOLT, 3/8-16 X 2-1/4" GD5 TFL
BODY CLIP, 3/8-16 X .688" DEEP
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
73
u
d
i
t
c
n
o
25-Feb-2022
Parking Brake Group S/N: 4001694244 and Below
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
74
Mfg. No: 5901883
n
o
25-Feb-2022
Parking Brake Group S/N: 4001694244 and Below
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
5420288AA
5025213X8
5108660
5101123
5104641
5414628AA
5023323
5104642
5025391
5010213
5020047
5020637
5104748
5023216
5025045
5025100
5025126
5025154
5025155
5025156
5025211
5025220
5025510
5025010X6
5025010X18
5414630AA
5414631AA
1
1
2
4
1
1
1
2
9
1
2
2
2
1
2
2
1
10
3
2
6
2
1
8
1
1
1
WELD, BRAKE HANDLE, W45 - BLK
PIN, CLEVIS, 5/16 X 1, PLATED
ROD, PARKING BRAKE, W45
BEARING, 1/2 FLANGED, PLASTIC BALL
ROD, PARKING BRAKE, W35, UPPER
WELD, BRAKE ROD, W35 - BLK
CLEVIS, 5/16-24, STEEL, CLEAR ZINC
ROD, PARKING BRAKE, W35, UPPER
NUT, 1/4-20 Hex Nylock Flange
SPRING-EXT, .740 ODX2.025LGX.072WR, BLK
COLLAR, 5/16" Set
SPRING-COMP, .375IDX2.75LGX.054WR, SS
COLLAR, DOUBLE SPLIT, 7MM
NUT, Hex Jam, 5/16-24
NUT, Hex, Nylon Lock, 5/16-24
NUT, Hex, Side Lock, 3/8-16
NUT, Hex, Serrated Flange, 1/4-20
WASHER, 1/4 SAE
WASHER, 5/16" SAE
WASHER, 3/8 SAE
PIN, HAIR, .0585 X 1-1/8, 1/4 EYE, YZ
BOLT, 3/8-16 x 1-1/2", 1/2" SHOULDER
GRIP, FOAM, 1/4 X 1 X 4.1
BOLT, 1/4"-20 X 3/4" GD5 YZ
BOLT, 1/4-20 X 2-1/4 GD5 CZ
WELD, BRAKE PIVOT, W35 - RH - BLK
WELD, BRAKE PIVOT, W35 - LH - BLK
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
75
u
d
i
t
c
n
o
25-Feb-2022
Parking Brake Group S/N: 4001694245 and Above
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
76
Mfg. No: 5901883
n
o
25-Feb-2022
Parking Brake Group S/N: 4001694245 and Above
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
5421078AA
5025213X8
5108660
5101123
5104641
5414628AA
5023323
5104642
5025391
5010213
5020047
5020637
5104748
5023216
5025045
5025100
5025126
5025154
5025155
5025156
5025211
5025220
5414631AA
5025010X6
5025010X18
5414630AA
1
1
2
4
1
1
1
2
9
1
2
2
2
1
2
2
1
10
3
2
6
2
1
8
1
1
WELD, BRAKE HANDLE, W45 - BLK
PIN, CLEVIS, 5/16 X 1, PLATED
ROD, PARKING BRAKE, W45
BEARING, 1/2 FLANGED, PLASTIC BALL
ROD, PARKING BRAKE, W35, UPPER
WELD, BRAKE ROD, W35 - BLK
CLEVIS, 5/16-24, STEEL, CLEAR ZINC
ROD, PARKING BRAKE, W35, UPPER
NUT, 1/4-20 Hex Nylock Flange
SPRING-EXT, .740 ODX2.025LGX.072WR, BLK
COLLAR, 5/16" Set
SPRING-COMP, .375IDX2.75LGX.054WR, SS
COLLAR, DOUBLE SPLIT, 7MM
NUT, Hex Jam, 5/16-24
NUT, Hex, Nylon Lock, 5/16-24
NUT, Hex, Side Lock, 3/8-16
NUT, Hex, Serrated Flange, 1/4-20
WASHER, 1/4 SAE
WASHER, 5/16" SAE
WASHER, 3/8 SAE
PIN, HAIR, .0585 X 1-1/8, 1/4 EYE, YZ
BOLT, 3/8-16 x 1-1/2", 1/2" SHOULDER
WELD, BRAKE PIVOT, W35 - LH - BLK
BOLT, 1/4"-20 X 3/4" GD5 YZ
BOLT, 1/4-20 X 2-1/4 GD5 CZ
WELD, BRAKE PIVOT, W35 - RH - BLK
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
77
u
d
i
t
c
n
o
25-Feb-2022
Transaxle Drive Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
78
Mfg. No: 5901883
n
o
25-Feb-2022
Transaxle Drive Group
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
100
5104193
5021225
5104237
5104286
5103262
5420337AA
7078243
5104153
5025017X32
5025396
5104191
80003522
5025394
5025156
5103676
5104676
5025013X14
5025141X26
5025032
5025392
5104937
5025401
-----
1
1
1
1
1
1
2
1
1
1
1
1
3
1
1
1
2
1
1
1
1
1
1
BELT, A-SEC, COG TYPE, 76.2" EL ARAMID
PULLEY-IDLER-V, 4.00OB, .669ID, .88W,STL
INSERT, BEARING, .51ID X .90OD X 1.15L
SPACER, .52 X .88 X .14, HT
SPACER, IDLER ARM, 1/2, PM
WELD, IDLER, HYDRO, W45 - BLK
BEARING, BALL, AXLE
SPACER, .52 X .84 X 1.00, PM
BOLT, 1/2-13 X 4" GD5 CZ
NUT, Hex Flange, Nylock, 1/2-13
PULLEY, FLAT IDLER, 3-1/4" FLANGED
HHCS, 3/8-16 X 2.00, GR5, ZINC/CLEAR
NUT, 3/8 - 16 HEX NYLOCK FLANGE
WASHER, 3/8 SAE
SPACER, .39 X .55 X .38, PM, CZ
SPRING EXT, 1.50ODX4.75LGX.177WR, BLK
BOLT, 3/8-16 X 1-3/4" GD5 CZ
EYE BOLT,5/16-18 X3.5,2.13THRD,.55EYE,CZ
NUT, 5/16-18 HEX
NUT, 5/16-18 HEX NYLOCK FLANGE NUT
SPACER, .385"ID X .625" OD X .062" THK
WASHER, 3/8" USS
Refer to: Engine & PTO Group
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
79
u
d
i
t
c
n
o
25-Feb-2022
Transaxle SERVICE PARTS - 5108694 and 5108693
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
80
Mfg. No: 5901883
n
o
25-Feb-2022
Transaxle SERVICE PARTS - 5108694 and 5108693
REF NO
PART NO
QTY
DESCRIPTION
5108694
5108693
1
2
7
11
13
23
30
31
32
33
34
35
40
41
42
48
55
56
57
60
64
65
69
70
71
72
73
74
80
81
82
83
90
91
92
93
94
95
96
97
102
103
106
130
156
157
158
164
189
5108694
5108693
----------------------------------------------------------------1730272
5023414
5023415
--------------------1706130
--------------------------------------------5104822X2
----5103589X1
5103382
5103750
5104055
--------5104822X3
-----------------
1
1
1
1
16
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
TRANSAXLE, ZT3400, Z9-YMFE-SL5C-1UXX
TRANSAXLE, ZT3400, Z9-WMFE-SL5B-1UXX
KIT, MAIN HOUSING LH, CHARGE, CONTROL
KIT, COVER, SIDE, LH, COOLER
SCREW, HEX WASHER
PLUG EXTERNAL HEX VENT 9/16-18
TUBE, SEALANT
FILTER, SPIN-ON 2.6 X 3.0
SEAL, LIP .375 X .75 X .25
BYPASS RETAINING RING 1
ROD, BYPASS .375 X 2.88
BYPASS RETAINING RING 2
ARM, BYPASS
RING, RETAINING .375 EXTERNAL
SWASHPLATE, TRUNNION
SEAL, LIP 10 X 32 X 7
STUD, SHORT 5/16-24
SPACER
SPACER (50951)
Lip Seal 17 x 40 x 7 PTC
Spacer
BEARING, THRUST 35 x 62 x 18
KIT, 16cc CYLINDER BLOCK ASSEMBLY STEAM TREAT
BEARING, THRUST PLASTIC CAGE
KIT, BLOCK 7 PISTON
WASHER, .63 X 1.00 X .05 FLAT
RING-SNAP
(44145)
GEAR, 14T (STEEL)
SHAFT, MOTOR
WASHER, .71 X 1.16 X .04 FLAT
WASHER, .51 X 1.00 X .03 FLAT
GEAR, 45T
GEAR, 11T (STEEL)
PIN, JACKSHAFT
RING, RETAINING 2.25 INTERNAL
GEAR, 54T FORGED
SPACER, .750 X 1.320 X .257
KIT, BEARING
SHAFT, AXLE, ZT-3400, 53528
BEARING, BALL, AXLE INBOARD
KIT, SEAL, AXLE - HG# 53699
HUB, ASM, TRANS #71446
BRAKE ARM, ZT-3400
E-CLIP, BRAKE ARM, ZT3100 & ZT3400
KIT, FILTER GUARD
TUBE, CHARGE TRIPLE O-RING
CAP, AXLE, ZT-3400, 53501
KIT, GEROTOR SEAL
MAGNET
WASHER, 1.355 x 2.035 x .021 FLAT
ASSEMBLY, AUX COOLER PORT
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
81
u
d
i
t
c
n
o
25-Feb-2022
Transaxle SERVICE PARTS - 5108694 and 5108693
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
82
Mfg. No: 5901883
n
o
25-Feb-2022
Transaxle SERVICE PARTS - 5108694 and 5108693
REF NO
PART NO
QTY
DESCRIPTION
190
193
200
201
202
203
207
209
210
211
215
--------------------5101026X12
5104580X1
-----------------
2
1
1
1
1
1
1
1
1
1
1
SCREW, PAN HEAD, 1/4-20 X .625
PLUG, 3/4-16
KIT, SEAL (ZT-3400)
KIT, CENTER SECTION, LH CHARGE
KIT, CHARGE RELIEF
KIT, CHARGE PUMP, ZT2800, ZT3100
FAN & PULLEY KIT, ZT3400'S, STAND-ON
KIT, HUB PULLER
KIT, INPUT SHAFT
KIT, CONTROL ARM
KIT, OUTBOARD, RH ROT B / LH ROT A
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
83
u
d
i
t
c
n
o
25-Feb-2022
Wheel and Tire Group
Note: Unless noted otherwise, use the standard torque specifications
r
o
u
F
d
t
o
o
r
N ep
R
Copyright © Briggs & Stratton. All Rights reserved
i
t
c
84
Mfg. No: 5901883
n
o
25-Feb-2022
Wheel and Tire Group
REF NO
PART NO
QTY
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
5025396
5100715
5101418X1
5021043
5045996
5025158
5025017X56
5102329
5101293X1
5102329X2
5020601
2
2
2
2
2
2
2
2
2
2
8
NUT, Hex Flange, Nylock, 1/2-13
TIRE ASSM, 11X4.00-5 FLAT FREE
BEARING, ROLLER (SV)
BEARING, RETAINER (SV)
CASTER AXLE DDSH
WASHER, 1/2 SAE
BOLT, HEX, 1/2-13 X 7, GD 8, YZ
TIRE ASSM, 20X8.00-10NHS, TM, 2.625 OFFS
TIRE, REAR, 20X8X10, TURF MASTER (SV)
WHEEL, 10X7.00 4/4 SOLID F237 2.625 OS (SV)
NUT, 1/2-20, FOR WHEEL BOLT, SILVER
F
t
o
N
Copyright © Briggs & Stratton. All Rights reserved
r
o
e
R
o
r
p
85
u
d
i
t
c
n
o
25-Feb-2022
Hardware Identification & Torque Specifications
Torque Specification Chart
Torque Specification Chart
FOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%)
Property
Class
5.6
8.8
Class 5.6
Class 8.8
in/lbs
Size Of
Hardware ft/lbs
M3
M4
M5
M6
M7
M8
M10
M12
M14
M16
M18
M20
M22
M24
M27
M30
M33
M36
M39
5.88
13.44
26.4
44.64
5.2
7.7
15
26
42
64
89
126
169
217
320
435
590
759
988
10.9
Nm.
Nm.
in/lbs
ft/lbs
.56
1.28
2.50
4.3
7.1
10.5
21
36
58
88
121
171
230
295
435
590
800
1030
1340
13.44
30.72
60.96
7.3
12.1
17.7
35
61
101
147
202
290
390
497
733
995
1349
1740
2249
1.28 19.2
2.90 43.44
5.75 5.97
9.9 10.3
16.5 16.9
25
24
50
48
83 86.2
136
132
210
200
287
275
405
390
559
530
708
375
995 1032
1350 1401
1830 1902
2360 2441
3050 3163
SAE Grade 2
Class 12.9
Size Of
Hardware
Nm.
in/lbs
ft/lbs
Nm.
1.80
4.10
8.10
14
23
34
67
117
185
285
390
550
745
960
1400
1900
2580
3310
4290
22.92
52.56
7.15
12.1
19.9
29
59
103
162
250
346
486
656
840
1239
1681
2278
2935
3798
2.15
4.95
9.7
16.5
27
40
81
140
220
340
470
660
890
1140
1680
2280
3090
3980
5150
20
10
30
40
50
60
80
70
Body Length
Screw, M8- 1.25 x 25
Thread
Diameter (mm)
Threads
Inside
Diameter (in) per inch
1/4
1/2
3/4
1
2.1
2.3
3.1
3.5
7.6
8.6
15.0
16.3
27.2
31.3
40.8
47.6
68.0
74.8
88.4
102.0
122.4
136
217.6
244.8
190.4
210.8
299.2
326.4
Body
Length (mm)
Body
Length (in)
in/lbs
ft/lbs
30
31
43
49
8
10
17
19
30
35
50
55
75
90
110
120
150
180
260
300
400
440
580
640
SAE Grade 8
Nm.
in/lbs
ft/lbs
Nm.
3.4
3.5
4.9
5.5
10.9
13.6
23.1
25.8
40.8
47.6
68.0
74.8
102.0
122.4
149.6
163.2
204.0
244.8
353.6
408.0
544.0
598.4
788.8
870.4
41
43
60
68
12
14
25
29
45
50
70
80
110
120
150
170
220
240
386
420
600
660
900
1,000
4.6
4.9
6.8
7.7
16.3
19.0
34.0
34.0
61.2
68.0
95.2
108.8
149.6
163.2
204.0
231.2
299.2
326.4
525.0
571.2
816.0
897.6
1,244.0
1,360.0
NOTES
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
Screw, 1/2- 16 x 2
Nut, 1/2-16
0
Distance between
threads (mm)
Threads
per inch
Thread
Diameter (mm)
Body
Diameter
19
20
27
31
66
76
11
12
20
23
30
35
50
55
65
75
90
100
160
180
140
155
220
240
SAE Grade 5
Nm.
100
90
Body
Diameter
Nut, M8
in/lbs
ft/lbs
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18
5/16-24
3/8-16
3/8-24
7/16-14
7/16-20
1/2-13
1/2-20
9/16-12
9/16-18
5/8-11
5/8-18
3/4-10
3/4-16
7/8-9
7/8-14
1-8
1-12
The guides and ruler furnished below are designed to
help you select the appropriate hardware.
0
No
Marks
Hardware
Grade
12.9
Class 10.9
in/lbs
ft/lbs
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
1/4
1/2
3/4
2
1/4
1/2
3/4
3
1/4
1/2
3/4
4
Common Hardware Types
Hex Head Capscrew
Washer
Standard Hardware Sizing
When a washer or nut is identified as 1/2” (M8), this is
the Nominal size, meaning the inside diameter is 1/2 inch
(8mm metric thread diameter); if a second number is present
it represents the threads per inch (distance between threads).
When bolt or capscrew is identified as 1/2 - 16 x 2” (M8 - 1.25 x 50),
this means the Nominal size, or body diameter is 1/2 inch (8mm
metric thread diameter), the second number,16, represents the
threads per inch, (distance between threads). The final number
is the body length of the bolt or screw, 2 inches (50mm).
Lockwasher
Carriage Bolt
Hex Nut
Wrench & Fastener Size Guide
1/4” Bolt or Nut
Wrench—7/16”
5/16” Bolt or Nut
Wrench—1/2”
3/8” Bolt or Nut
Wrench—9/16”
M6 Bolt or Nut
Wrench—10mm
M8 Bolt or Nut
Wrench—13mm
M10 Bolt or Nut
Wrench—17mm
7/16” Bolt or Nut
1/2” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench—3/4”
Wrench (Nut)—11/16”
M12 Bolt or Nut
Wrench—19mm
M14 Bolt or Nut
Wrench—22 mm
Copyright © Briggs & Stratton. All Rights reserved
25-Feb-2022

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project