"user manual"

"user manual"
886E series
Motorcycle Alarm System
All rights reserved
The trademark, patent and copyright are owned by Steelmate Co., Ltd.
The right to change the design and specifications reserved
Manual
Contents
User's Manual
Installation Manual
Important notice --------------------------------------
2
Installation guide -------------------------------------
5
Key features -------------------------------------------
2
ECU installation --------------------------------------
6
Technical parameter --------------------------------
2
Siren installation -------------------------------------
6
Brief look at each device --------------------------
2
Warranty terms ---------------------------------------
6
Functions -----------------------------------------------
3
Warranty card -----------------------------------------
7
1. Arming -----------------------------------------------
3
2. Emergency alarm ---------------------------------
3
3. Disarming and rearming ------------------------
3
4. Locating by sound and light --------------------
3
5. Not-armed warning -------------------------------
3
6. Anti-hijacking --------------------------------------
3
7. Remote engine stop -----------------------------
3
8. Adjusting the sensitivity of shock sensor ---
3
Important notice
Technical parameter
Please install the system by an authorized
engineer.
Voltage:
Static current:
Siren SPL:
Frequency range:
Keep the product and the transmitters from water.
It is highly recommended you read this manual
carefully before the installation and operation of
this unit.
9-16V
<3mA
105~125dB
433.92MHz
When the transmitter operating distance is shorter
or its indicator light turns dark, please replace the
battery with a new one ASAP.
Motorcycle Alarm
System
User's Manual
Key features
Brief look at each device
Fashionable transmitter
Water resistant ECU
Sensitivity adjustable
Remote control arming/disarming/locating
Anti-jamming and engine immobilization
Low power consumption (<3mA)
1
Arm
Press button to arm in alarm arming mode.
Mute
Press
button to arm in mute arming mode.
Disarm
Press button to disarm the system.
Panic
Press to locate the motorcycle.
2
Functions
1. Arming
Press button to arm in alarm arming mode. When
the system is impacted at the first time, the turn
signals will flash 3 times with siren chirping. If the
system is impacted for the second time within 15
seconds, the siren will chirp sharply with turn signals
flashing for 15 seconds, and the engine will be
immobilized.
5. Not-armed warning
When the motorcycle is ACC off and the system is
not armed in 10 seconds, the siren will chirp 3 times
with turn signals flashing 3 times to remind the owner
to arm the system.
6. Anti-hijacking
During driving, press button for 1 second, the siren
will chirp sharply with turn signals flashing, the engine
will be immobilized after 10 seconds. Press button
to stop this function.
Press button to enter mute arming mode. When
the system is impacted at the first time, the turn
signals will flash 3 times. If the system is impacted
for the second time within 1.5 seconds, the turn
signals will flash for 15 seconds, and the engine
will be immobilized.
7. Remote engine stop
When the engine is running, press
the engine will be stopped.
button once,
Motorcycle Alarm
System
8. Adjusting the sensitivity of shock sensor
In disarming status, press and hold button for 5
seconds, the turn signals will turn on and enter the
shock sensor sensitivity setting mode. Press
button to adjust the shock sensor sensitivity. The
shock sensor has 5 sensitivity levels, level 5 is the
highest sensitivity, and level 1 is the lowest (factory
setting is level 4).
While selecting sensitivity levels, the siren beeps
once indicates the sensitivity is level 1, the siren
beeps twice indicates for level 2, three times for level
3, and so on. Once the suitable sensitivity is set,
press button to confirm and exit the setting mode.
2. Emergency alarm
In arming mode, if the key is turned to ACC ON
position, the siren will alarm sharply, the turn signals
will flash and the engine will be immobilized. Press
any button to stop alarming.
3. Disarming and rearming
In arming mode, press button to disarm the
system. If the motorcycle is not impacted or the
engine is not started in 30 seconds, the system
will return to the former arming mode automatically.
Press button twice, the turn signals will flash
twice and the system will be disarmed completely.
4. Locating by sound and light
In arming mode, press for 2 seconds, the siren
will chirp for 1.5 seconds with turn signals flashing
to locate the motorcycle.
Installation Manual
If there is no operation within 15 seconds in the
sensitivity setting mode, the system will return to
previous sensitivity setting and exit.
3
4
Antenna
Installation guide
ECU installation
Warranty terms
Please mount the
ECU downwards.
I. The unit is warranted for a limited period of time
from the date of purchase. In the unlikely event
of a defect arising in this product when used in
accordance with the manufacturer's instructions,
the parts would be repaired or replaced free of
charge.
l It is required to show warranty card when
making any warranty claims.
l The model and serial number on the unit must
be the same as the information on the warranty
card.
ECU
Siren installation
Engine lock
Please mount the siren downwards as shown in
the figures 1 or 2 below:
II. This warranty is non-transferable and is
automatically void if:
l The original purchaser has not completed the
warranty card.
l The unit's serial number is defaced, missing or
altered.
l The unit has been modified or used in a manner
contrary to its intended purpose.
l The unit has been damaged by accident,
unreasonable use, neglect, improper installation
or service.
1
Blue
12V
Turn
signals
Cut off
GND
Grey
Dark green
Flame out wire
Siren
Dark green
Engine lock (+)
Black
Pink
Yellow
Yellow
2
III. The warranty does not cover damage to the
unit caused by installation or removal of the unit.
Orange
3
Motorcycle alarm system
Motorcycle
Red
5
6
Warranty card
Dear user:
Thank you for choosing this product.
Please fill the form below and retain it.
User's information:
User:
Tel:
Vehicle license No.:
Product model No.:
Serial No.:
Date of installation:
Name of the retailer
Signed by distributor
7
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement