Precision Medical PM63, PM63E Aspirator User Manual

Below you will find brief information for Aspirator PM63, Aspirator PM63E. The Aspirator PM63, Aspirator PM63E is a medical device designed to provide a continuous or intermittent vacuum source for aspirating fluids during medical suctioning procedures. It features an adjustable vacuum control knob and a selector knob for choosing between regulated, intermittent, or off modes. The unit also includes an inline hydrophobic filter to prevent liquid from entering the vacuum pump.

PDF Download
Document
Aspirator PM63, Aspirator PM63E User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Adjustable vacuum control
  • Intermittent vacuum mode
  • Inline hydrophobic filter
  • Full vacuum capability
  • Easy-to-use controls
  • Compact and portable design
  • High-performance vacuum pump
  • Safety features (thermal limit, fuse)
  • 2000 cc suction canister

Frequently asked questions

The operating vacuum range is 0 - 200 mmHg with a "Full Vacuum" of 279 mmHg ± 51 mmHg.

Turn the Vacuum Control Knob clockwise to increase the vacuum and counterclockwise to decrease it.

Disconnect the filter assembly from the Suction Canister, remove the canister, and then remove the filter assembly. Dispose of the old filter and install a new one (Part #1690).

Check the troubleshooting guide in the manual. If the issue persists, contact your healthcare provider.
ALP:
Preparing document for printing…
0%