1. Toad Data Modeler must be installed to a non-unicode named folder. If a unicode character is found in folder name, License Key will not be recognized properly. It is recommended to install the application to default folder: Program Files/Quest Software/Toad Data Modeler 3.

2. If you have installed any version of Toad Data Modeler (TDM) using the TDM stand alone installer and run any of the Toad bundles that contain Toad Data Modeler, the Quest Installer will display incorrectly that Toad Data Modeler has not been installed.

3. Installing Features for Toad Data Modeler: During the initial installation of Toad Data Modeler you have the option to install support for the various database platforms, using the new

'Features' functionality within the Quest Installer (QI). If you want to add new features (after

TDM is already installed), you must do so from the Control Panel via the Add or Remove

Programs section in your operating system.

4. Toad Data Modeler 3.3.5 supports side-by-side installation.

Upgrade – New version of Toad Data Modeler is installed to the same folder where previous version was installed.

Side-by-side Installation - New version of Toad Data Modeler is installed to another location.

5. Limitations of trial version: 15 - day trial period and multiple features limited to a maximum of

25 entities. Details here .

6. Do NOT open and resave models originally created in developmentally higher version of Toad

Data Modeler (e.g. in v. 3.3.5) in lower version of Toad Data Modeler (e.g. in v. 3.2.5).

7. Note for users of Toad Data Modeler BETA: BETA uses different folders for configuration files and other default directories than Toad Data Modeler Commercial version. You can install and use both versions on one computer.

1/19

11/18/2008

First Installation of Toad Data Modeler (Clean Install)

1. Run the Toad Data Modeler Setup Wizard and go through the installation process.

Default path where Toad Data Modeler is installed:

C:\Program Files\Quest Software\Toad Data Modeler 3

2. Select what features (support for various database systems) you want to install.

3. In the end of the installation process, select Run Toad Data Modeler and click Finish.

Note: The new Toad Data Modeler version allows side-by-side installation. Although this is your first installation of Toad Data Modeler, Toad Data Modeler needs to create a new Installation folder where configuration settings and other files will be saved. Therefore, the following dialog will occur.

Only New Configuration option is available. Click OK.

4. Name the Installation folder. Standard Installation is a default name. Confirm OK.

5. Toad Data Modeler will run in a trial mode. The following dialog will appear:

2/19

11/18/2008

Click Enter Commercial Key and enter your license key.

More information on Toad Data Modeler Trial version can be found here .

Note: After you install Toad Data Modeler 3.3.5, a new installation folder will be created in your

Documents and Settings directory – Standard Installation. More information on this folder is available in

the Default Locations topic.

3/19

11/18/2008

Upgrade

If you select this installation method, it means that:

You had Toad Data Modeler installed on your computer (v. 3.2.x or previous) and uninstalled it before the new version installation.

You did not uninstall previous version and still have Toad Data Modeler (v. 3.2.x or previous) installed on your computer.

You install the new version to the same location where the previous version is.

1. Run the Toad Data Modeler Setup Wizard and go through the installation process.

Default path where Toad Data Modeler is installed:

C:\Program Files\Quest Software\Toad Data Modeler 3

2. Select what features (support for various database systems) you want to install.

3. In the end of the installation process, select Run Toad Data Modeler and click Finish.

The following dialog will occur:

Explanation: The new Toad Data Modeler version allows side-by-side installation. You store your configuration settings of the previous Toad Data Modeler version in your Documents and Settings directory. Now you are asked whether you like to preserve them or not.

A: Press Yes to copy your configuration settings and Version Manager files of previous Toad Data

Modeler version to the new version.

(TDM will create a new folder Installation # in your Documents and Settings directory where these files will be stored - C:\Documents and Settings\user name\Application Data\Quest Software\Toad Data

Modeler\Installation #.)

B: Press No to use default configuration settings and Version Manager files of the new Toad Data

Modeler version.

(Note: In this case, Version Manager files (projects you created in previous version of Toad Data

Modeler) will not be copied to the Installation # folder for the new version.)

In both cases, a new folder Standard Installation is created by default at:

C:\Documents and Settings\user name\My Documents\Toad Data Modeler

More details on this folder are available in the Default Locations topic.

4/19

11/18/2008

Side-by-Side Installation

If you select this installation method, it means that:

You already have Toad Data Modeler installed on your computer (v. 3.2.2 or previous). You do not uninstall this old version.

You install the new version to a new location.

1. Run the Toad Data Modeler Setup Wizard and go through the installation process. Change the default path and define a new path where Toad Data Modeler 3.3.5 will be installed:

Example: C:\Program Files\TDMTemporary

2. Continue the installation process and select what features (support for various database systems) you want to install.

3. In the end of the installation process, select Run Toad Data Modeler and click Finish.

The following dialog will occur:

5/19

11/18/2008

Explanation: The application will be executed from the new location for the first time. You need to select what configuration settings should be used.

A: Press Yes to copy your configuration settings and Version Manager files of previous Toad Data

Modeler version (v. 3.2.2 or previous) to the new version.

Modeler\Installation #.)

B: Press No to use default configuration settings and Version Manager files of the new Toad Data

Modeler version.

(Note: In this case, Version Manager files (projects you created in previous version of Toad Data

Modeler) will not be copied to the Installation # folder for the new version.)

4. Then the new Toad Data Modeler version will open in a trial mode. The following dialog will appear:

5. If you are a holder of a permanent license key, click Enter Commercial Key and enter your license key information from previous Toad Data Modeler version (see e.g. the Help menu |

License).

Note: You will not have to enter your commercial key again if you use Vista OS.

6/19

11/18/2008

Re-Installation of Toad Data Modeler 3.3.5

Sample Situation:

You have these Toad Data Modeler versions on your computer:

Toad Data Modeler 3.2.x or previous version

Toad Data Modeler 3.3.5

You need to reinstall Toad Data Modeler 3.3.5 for any reason.

You will uninstall Toad Data Modeler 3.3.5 first, then you will install it to the same location.

1. Uninstall Toad Data Modeler 3.3.5.

2. Run the Toad Data Modeler Setup Wizard and go through the installation. Install it to the same location.

Example: C:\Program Files\TDMTemporary

3. Select what features (support for various database systems) you want to install.

4. In the end of the installation process, select Run Toad Data Modeler and click Finish.

The following dialog will occur:

Explanation: You are asked what configuration and Version Manager files should be used for this version – whether those of Toad Data Modeler 3.2.x (and previous) or those of uninstalled

Toad Data Modeler 3.3.5 version.

In this example, files of Toad Data Modeler 3.3.5 will be used.

5. Press OK.

6. Name of Installation information will appear.

7/19

11/18/2008

7. Confirm OK.

8/19

11/18/2008

Silent Installation of Toad Data Modeler

To perform a silent installation of Toad Data Modeler, you must have the setup.MSI file for Toad Data

Modeler. This MSI is then used with the installation variable to define the installation options.

The argument for the silent installation from a command line is “/q”. To specify a directory where Toad

Data Modeler should be installed, it is possible to use INSTALLDIR=”PATH” . (Otherwise, the default path will be used.)

Example: setup.msi /q INSTALLDIR="C:\Program Files\Quest Software\Toad Data Modeler 3\"

In order to specify for which database platform Toad Data Modeler should be installed or which shortcuts should be created and where, use the parameter ADDLOCAL. If this parameter is not used, default installation will be performed.

Example: setup.msi /q INSTALLDIR="C:\Program Files\Quest Software\Toad Data Modeler 3\"

ADDLOCAL=Complete,XPMANIFEST,SUPPORTDATABASES,SHORTCUTUNINSTALL,SHORTCUTDE

SKTOP,SHORTCUTSTARTMENU,SHORTCUTQUICKLAUNCH,SHORTCUTHELP,POSTGRESQL,POS

TGRESQL81,POSTGRESQL82

Provided you use the parameter ADDLOCAL , always select the options Complete, XPMANIFEST,

SUPPORTDATABASES. These three options are obligatory for the correct installation.

During installation of support for particular database platform, it is necessary to install basic support for the selected database platform. Example: For successful installation of support for Oracle 10g database,

Oracle must be selected too.

Shortcuts

SHORTCUTUNINSTALL

SHORTCUTDESKTOP

SHORTCUTSTARTMENU

SHORTCUTQUICKLAUNCH

SHORTCUTHELP

Creates a shortcut for uninstall in Start Menu.

Creates a shortcut for Toad Data Modeler on desktop.

Creates a shortcut for Toad Data Modeler in Start Menu.

Creates a shortcut for Toad Data Modeler in Quick Launch bar.

Creates a shortcut for Help file, User Manual and Reference Guide in

Start Menu.

9/19

11/18/2008

Database Platforms

Oracle

ORACLE

ORACLE_9

ORACLE_10G

ORACLE_11G

SQL

Server

MSSQL

MSSQL2000

MSSQL2005

MSSQL2008

MySQL

MYSQL

MYSQL50

MySQL51

PostgreSQL

POSTGRESQL

POSTGRESQL81

POSTGRESQL82

POSTGRESQL83

Basic support for Oracle

Support for Oracle 9i

Support for Oracle 10G

Support for Oracle 11G

Basic support for MS SQL Server

Support for MS SQL 2000

Support for MS SQL 2005

Support for MS SQL 2008

Basic support for MySQL

Support for MySQL 5.0

Support for MySQL 5.1

Basic support for PostgreSQL

Support for PostgreSQL 8.1

Support for PostgreSQL 8.2

Support for PostgreSQL 8.3

Sybase

ASE

SYBASE

SYBASE12.5

SYBASE15

DB2 (

LUW

)

DB2

DB2UDBv8

DB2v9

Basic support for Sybase ASE

Support for Sybase ASE 12.5

Support for Sybase ASE 15

Basic support for DB2 (LUW)

Support for DB2 UDB 8 (LUW)

Support for DB2 9 (LUW)

Access

MSACCESS

MSACCESS_2000_2003

Basic support for MS Access

Support for MS Access 2000/2002/2003

Other parameters for silent installs can be found after you set the “setup.msi ?” command.

10/19

11/18/2008

Toad Data Modeler Trial Version

Limitations of Trial Version

15 – day trial period,

25 – entity limit to save a model, to print a model, to export a model to graphic file, to generate a report (including alter report and XSL transformation report), to generate SQL/DDL script.

The limitations relate to both physical and logical models.

Save Model – You are not allowed to save a model with more than 25 entities. If you want to save your entire model, you can contact your Quest Sales Representative at [email protected] to request a full functionality trial override key.

Print – You are not allowed to print a model with more than 25 entities. If you want to print your entire model, you can contact your Quest Sales Representative at [email protected] to request a full functionality trial override key.

Export to Graphic File – You are not allowed to export to graphic file a model with more than 25 entities. If you want to export your entire model to graphic file, you can contact your Quest

Sales Representative at [email protected] to request a full functionality trial override key.

Alter Report – You are not allowed to generate alter report for a model with more than 25 entities. If you want to generate alter report for your entire model, you can contact your Quest

Sales Representative at [email protected] to request a full functionality trial override key.

Report – You are allowed to generate HTML/RTF/PDF report only for first 25 entities of the model plus other objects of the model (procedures, functions etc.).

XSL Transformation Report – You are allowed to generate the XSL Transformation report only for first 25 entities of the model and other related objects of the model (procedures, functions etc.).

SQL/DDL Script Generation – You are allowed to generate SQL/DDL script only for first 25 entities of the model and other related objects of the model (procedures, functions etc.).

New

Dialogs

in Trial Version

See new dialogs in Toad Data Modeler 3.3.5 for trial version.

First run of Toad Data Modeler

Toad Data Modeler will open in a trial mode. Trial period is 15 days. During this time, you can evaluate the software.

Click Continue Evaluation to open the Toad Data Modeler Trial version.

Click Purchase Commercial Key to be directed to the Quest Software website.

Click Enter Commercial Key to enter your license key.

(See the screenshot below.)

11/19

11/18/2008

15-day trial period has expired.

You can either purchase a commercial key or request a trial extension. See the information and options in the dialog below.

12/19

11/18/2008

Maximum number of possible trial keys has been used.

You can either purchase a commercial key or contact the Quest Sales team to get a trial extension.

13/19

11/18/2008

Default Locations of Toad Data Modeler 3.3.x

As Toad Data Modeler 3.3.5.x supports side-by-side installation, there is a new structure of stored files now. There are two new folders:

Installation #

Default path: C:\Documents and Settings\user name\Application Data\Quest Software\Toad

Data Modeler\Installation 11.

The number of installation is increasing with every new installation.

In this folder, configuration files and Version Manager files are stored.

Standard Installation (or <name> installation that you define)

Default path: C:\Documents and Settings\user name\My Documents\Toad Data

Modeler\Standard Installation

In this folder, aliases, models, user packages, user OTPs, styles and XSL files are stored.

In this location: C:\Documents and Settings\user name\My Documents\Toad Data Modeler, there are only GeneratedScripts and Reports folders (folders for ouputs) and the new Standard Installation folder where user’s files are stored.

Old Structure of Toad Data Modeler 3.2.x or Previous

Old structure of Toad Data Modeler 3.2.x or previous remains preserved. You can find your models, user packages, user OTPs and other files in old locations. Nothing will be lost.

Example: Models created in v. 3.2.x.x are stored at:

C:\Documents and Settings\user name\My Documents\Toad Data Modeler\Models

Models created in v. 3.3.5.x will be stored at:

C:\Documents and Settings\user name\My Documents\Toad Data Modeler\Standard

Installation\Models

14/19

11/18/2008

New Structure Description

1. After Toad Data Modeler 3.3.x is installed

Toad Data Modeler 3.3.x application is installed to:

C:\Program Files\Quest Software\Toad Data Modeler 3

Here, the following directories can be found:

BIN

In this directory, particularly the TDM.exe and Support.xml file containing list of supported database systems are stored.

Configs

Config files with default settings and default layout of Toad Data Modeler are stored here.

Documents

Directory with documentation to Toad Data Modeler – User Manual, Help file, Reference Guide, License

Agreement and Third Party License.

15/19

11/18/2008

Packages

System packages and metamodels are stored in System subdirectory. Default My Package is stored in

User subdirectory.

Samples

Directory with sample Toad Data Modeler models.

Selected OTPs

Directory with .txo files for each supported database platform and logical model, containing Default

(System) Selected Object Types and Properties.

Styles

Default CSS styles for report generation.

Version Manager

Definitional files for Version Manager.

XSL

Directory with .xslt files - templates for XSL transformation.

Release Notes document

Document with information on the product release.

product.lic file

File with your license key.

2. After you run Toad Data Modeler 3.3.x

After you run the application, new directories will be created in your Documents and Settings directory.

The files that you can modify will be copied to these directories. (From C:\Program Files\Quest

Software\Toad Data Modeler 3).

All changes you make in the files (e.g. changes in the application layout, new aliases, modified styles in reports, new default path to generated SQL/DDL code, modified My Package.txg file etc.) will be saved in your Documents and Settings directory and will be preserved when you update the application.

If you need to restore the original default settings, you can simply delete appropriate file in the

Documents and Settings directory. When you run Toad Data Modeler then, appropriate original default file from C:\Program Files\Quest Software\Toad Data Modeler 3 will be copied to the Documents and

Settings directory again.

16/19

11/18/2008

You will find the ‘user’ files in these locations:

C:\Documents and Settings\user name\Application Data\Quest Software\Toad Data

Modeler\Installation #

Here, Configs and Version Manager directories can be found.

Note: The number of installation will be increasing with every new installation.

Configs

Config files with settings of Toad Data Modeler and TDM.txe file with the application environment

(layout) are stored here.

Version Manager

Structure that you create in Version Manager is saved here.

C:\Documents and Settings\user name\My Documents\Toad Data Modeler\Standard

Installation

- Here, the following directories are created:

Aliases

Aliases you create and save during reverse engineering.

Models

Default path for physical and logical models you create in Toad Data Modeler.

Packages

Directory with metamodels and packages (.txg files). User packages - My Package and add-ons are stored here.

Selected OTPs

Directory with User Selected Object Types and Properties.

Styles

Default path to CSS styles for reports.

XSL

Directory where user .xslt files for XSL transformation are stored.

C:\Documents and Settings\user name\My Documents\Toad Data Modeler

- Here, the following directories are created:

Generated Scripts

Directory where DDL/SQL script and alter scripts are generated.

Reports

Directory where HTML, RTF reports, PDF and XSLT outputs are generated.

17/19

11/18/2008

Standard Installation

Directory with models, user packages, OTPs etc.

Besides these folders, there can be also directories and files of previous Toad Data Modeler versions

(3.2.x or previous). They are preserved.

Note: Default paths can be found in the Settings menu | Options | Paths (Version Manager) in Toad

Data Modeler 3.3.x.

18/19

11/18/2008

System Requirements

Platform

Memory

Hard Disk Space

Operating System

Minimal Requirements

Pentium IV

256 MB

100 MB

Windows 2000/XP/Vista

Optimal

Pentium dual core

1 GB

200 MB

Windows 2000/XP/Vista

19/19

11/18/2008

مرحباً! أنا روبوت دردشة يعمل بالذكاء الاصطناعي تم تدريبي خصيصًا لمساعدتك في Quest Software 3.3.5 Toad Data Modeler Installation Guide. لقد قمت بمراجعة المستند بدقة ويمكنني مساعدتك في تحديد موقع المعلومات التي تحتاجها بالضبط أو شرح المحتوى بعبارات واضحة و بسيطة. سواء كنت تبحث عن إرشادات حول ميزات معينة أو خطوات استكشاف الأخطاء وإصلاحها أو الاستخدام العام، فلا تتردد في طرح أسئلتك. كلما قدمت المزيد من التفاصيل حول مخاوفك أو احتياجاتك، زادت دقة و فعالية مساعدتي لك!

المساعد يكتب

المساعد غير متصل. يرجى المحاولة مرة أخرى في وقت لاحق.

يبدو أنك وصلت إلى مستند مكتوب بلغات متعددة، بما في ذلك لغة ليست لغتك الأم. يمكنك استخدام الروابط التالية لإخفاء الصفحات مؤقتًا بدون اللغة التي تفضلها.