Zimmer Periarticular Locking Plate - Distal Lateral Fibula Plating System Owner's Manual
Advertisement
Advertisement
Contact your Zimmer representative or visit us at www.zimmer.com
+H124972347601001/$061113K067
97-2347-601-00 5ML Printed in U.S.A. ©2006 Zimmer, Inc.
Locking in the perfect fit
Zimmer ®
Periarticular
Locking Plate
System
Periarticular Locking Plate System
Combining anatomic fit with locking technology
With the Periarticular Locking Plate System, Zimmer offers advanced solutions for the management of comminuted fractures and fractures in which deficient bone stock or poor bone quality is encountered. The system combines anatomically contoured periarticular plates with locking screw technology. The unique plate designs feature a transitioned profile that is thinner in the metaphyseal and thicker in the diaphyseal areas. Locking screw holes are combined with compression slots, so that the plates can be used both as locking devices and for fracture compression.
Precontoured plates that follow the shape of the bone
One of the most difficult challenges in the treatment of periarticular fractures is bending the plate to fit the specific profile of the bone. Zimmer’s advanced periarticular plates were developed using digital laser bone-scanning technology. The data was used to guide advanced fabricating technologies in the precise manufacture of precontoured implants. The Periarticular
Locking Plates closely follow the shape of the bone to create a fit that requires little or no additional bending.
Advanced fabricating technologies are guided by data from a digital laser scanner that helps to determine optimal implant contours.
PULL
HERE
Contact your Zimmer representative or visit us at www.zimmer.com
+H124972347601001/$061113K067
97-2347-601-00 5ML Printed in U.S.A. ©2006 Zimmer, Inc.
Locking in the perfect fit
Zimmer ®
Periarticular
Locking Plate
System
Periarticular Locking Plate System
Combining anatomic fit with locking technology
With the Periarticular Locking Plate System, Zimmer offers advanced solutions for the management of comminuted fractures and fractures in which deficient bone stock or poor bone quality is encountered. The system combines anatomically contoured periarticular plates with locking screw technology. The unique plate designs feature a transitioned profile that is thinner in the metaphyseal and thicker in the diaphyseal areas. Locking screw holes are combined with compression slots, so that the plates can be used both as locking devices and for fracture compression.
Precontoured plates that follow the shape of the bone
One of the most difficult challenges in the treatment of periarticular fractures is bending the plate to fit the specific profile of the bone. Zimmer’s advanced periarticular plates were developed using digital laser bone-scanning technology. The data was used to guide advanced fabricating technologies in the precise manufacture of precontoured implants. The Periarticular
Locking Plates closely follow the shape of the bone to create a fit that requires little or no additional bending.
Advanced fabricating technologies are guided by data from a digital laser scanner that helps to determine optimal implant contours.
Contact your Zimmer representative or visit us at www.zimmer.com
+H124972347601001/$061113K067
97-2347-601-00 5ML Printed in U.S.A. ©2006 Zimmer, Inc.
Locking in the perfect fit
Zimmer ®
Periarticular
Locking Plate
System
Periarticular Locking Plate System
Combining anatomic fit with locking technology
With the Periarticular Locking Plate System, Zimmer offers advanced solutions for the management of comminuted fractures and fractures in which deficient bone stock or poor bone quality is encountered. The system combines anatomically contoured periarticular plates with locking screw technology. The unique plate designs feature a transitioned profile that is thinner in the metaphyseal and thicker in the diaphyseal areas. Locking screw holes are combined with compression slots, so that the plates can be used both as locking devices and for fracture compression.
Precontoured plates that follow the shape of the bone
One of the most difficult challenges in the treatment of periarticular fractures is bending the plate to fit the specific profile of the bone. Zimmer’s advanced periarticular plates were developed using digital laser bone-scanning technology. The data was used to guide advanced fabricating technologies in the precise manufacture of precontoured implants. The Periarticular
Locking Plates closely follow the shape of the bone to create a fit that requires little or no additional bending.
Advanced fabricating technologies are guided by data from a digital laser scanner that helps to determine optimal implant contours.
Low-profile fixation accommodates both patient and surgeon
Zimmer’s periarticular plate designs decrease in thickness toward the joint line to reduce the potential for soft-tissue irritation and to simplify any additional contouring.
The reduced thickness also allows the implant to “autocontour” as the screws draw the plate toward the bone. The tapered plate shaft design, combined with specialized instrumentation, provides for submuscular passage of the plate and fixation that utilizes a minimally invasive technique.
Thick-to-thin plate profile makes the plate autocontourable
Beveled edge allows soft-tissue coverage
Zimmer Periarticular Locking Plate System components:
• Distal Lateral Femoral Plate
• 3.5mm and 5.5mm Proximal Lateral
Tibial Plates
• Distal Medial and Distal Lateral
Tibial Plates
• Proximal Humeral Plate
• Distal Radial Plates:
- Volar Lateral Column
- Volar Medial Column
- Dorsal T
- Dorsal Delta
- Radial Styloid
Double lead threads
(Double the shaft thread pitch)
Head and shaft travel at same rate into plate and bone
Periarticular
Self-Tapping Cortical
Bone Screw
Humeral Periarticular
Fracture w/Proximal
Humeral Locking Plate
The latest advancement in fixation: locking screw technology
Zimmer’s locking screw technology gives surgeons the ability to create a fixed-angle construct while using familiar plating techniques.
Conventional
Screw
The locking plate design does not require compression between the plate and bone to accommodate loading. Therefore, screw purchase in the bone can be achieved with a thread profile that is shallower than that of traditional screws.
In turn, the shallow thread profile allows for screws with a large core diameter to accommodate loading with improved bending and shear strength.
Tibial Periarticular
Fracture w/Proximal
Lateral Tibial
Locking Plate
Meeting clinical needs with a wide range of options
The Periarticular Locking Plate
System was designed with the input of experienced surgeons to ensure that the components meet current clinical needs and anticipate clinical needs of the future. The plates are available in a variety of lengths, both left and right.
Periarticular
3.5mm
Locking Screw
Ordering Information
PrOxIMaL LaTeraL HuMeraL LOckIng PLaTeS
3.5mm Proximal Lateral Humeral Locking Plate
Left
00-2358-002-04
00-2358-002-06
00-2358-002-08
00-2358-002-12
00-2358-002-16
Right
00-2358-001-04
00-2358-001-06
00-2358-001-08
00-2358-001-12
00-2358-001-16
3.5mm/2.7mm Periarticular Locking Instrument Set
00-2360-000-02 3.5mm/2.7mm Periarticular Locking
Instrument Set (Contains the following)
00-1147-071-00 Cleaning Stylet
Qty
00-1147-076-00 Cleaning Brush
00-2358-040-00 3.5mm/2.7mm Locking Screw and Instrument
1
1
1 Case
00-2360-011-01 3.5mm/2.7mm Locking Plate Reduction
Instrument
00-2360-011-02 3.5mm/2.7mm Locking Plate Reduction
Sleeve
00-2360-012-03 Plate Reduction Spin Knob
00-2360-020-20 2.0mm Standard Cannula
00-2360-020-27 2.7mm Standard Cannula
00-2360-021-16 1.6mm Standard Cannula
00-2360-033-16 1.6mm Standard Drill-Tip Guide Wire
(5 per Box)
00-2360-040-35 3.5mm/2.7mm Locking Screw Standard
Depth Gauge
00-2360-041-35 3.5mm Cannulated Locking Screw
Depth Gauge
00-2360-053-27 2.7mm Locking Screw Tap
2
2 Bx
1
00-2360-053-35 3.5mm Locking Screw Tap
00-2360-054-35 3.5mm Cannulated Locking Screw Tap
00-2360-065-00 2.5mm Screwdriver Stop Ring
00-2360-065-25 2.5mm Hex Standard Screwdriver
00-2360-066-25 2.5mm Hex Standard Cannulated
Screwdriver
00-2360-071-27 2.7mm Standard Cannulated Drill
00-2360-080-00 Torque-Limiting Attachment
00-2360-086-00 Modular Handle
00-2360-088-00 3.5mm/2.7mm Cannula Inserter
00-2360-175-20 2.0mm Standard Drill
00-2360-205-27 2.7mm Standard Drill
00-4812-045-00 Large Hex Screwdriver
00-2360-050-25 2.5mm Hex Forward Captive Screwdriver 0
00-2360-051-25 2.5mm Hex Cannulated Forward Captive
Screwdriver 0
2
1
1
2
1
1
2
2
2
2
1
2
1
2
4
4
2
2
4
Description
Proximal Lateral Humeral Locking
Proximal Lateral Humeral Locking
Proximal Lateral Humeral Locking
Proximal Lateral Humeral Locking
Proximal Lateral Humeral Locking
Holes
Plate 4
Plate 6
Plate 8
Plate 12
Plate 16
Proximal Lateral Humeral Locking Plate Set
00-2358-000-05 Proximal Lateral Humeral Locking
Plate Set (Contains the following)
00-2358-002-04 Proximal Lateral Humeral Locking Plate
00-2358-002-06 Proximal Lateral Humeral Locking Plate
00-2358-002-08 Proximal Lateral Humeral Locking Plate
00-2358-002-12 Proximal Lateral Humeral Locking Plate
00-2358-002-16 Proximal Lateral Humeral Locking Plate
00-2358-001-04 Proximal Lateral Humeral Locking Plate
00-2358-001-06 Proximal Lateral Humeral Locking Plate
00-2358-001-08 Proximal Lateral Humeral Locking Plate
00-2358-001-12 Proximal Lateral Humeral Locking Plate
00-2358-001-16 Proximal Lateral Humeral Locking Plate
Proximal Lateral Humeral Plate Standard Jig Set
00-2360-000-14 Proximal Lateral Humeral Plate
Standard Jig Set (Contains the following)
00-2360-092-01 Proximal Lateral Humeral Plate Jig, Right
00-2360-092-02 Proximal Lateral Humeral Plate Jig, Left
00-2358-030-05 Proximal Lateral Humeral Locking Plate Case
Length
90mm
114mm
138mm
186mm
234mm
Qty
1
1
1
1
1
1
1
1
1
1
Qty
1
1
1
Screw and Instrument Sets
00-2360-000-02 3.5mm/2.7mm Periarticular Locking Instrument Set
00-2359-000-02 3.5mm/2.7mm Locking Screw Set
00-2358-000-05 Proximal Lateral Humeral Locking Plate Set
00-2360-000-14 Proximal Lateral Humeral Plate Standard Jig Set
Compatible with:
Zimmer Periarticular 3.5mm Self-Tapping Cortical Screws; Zimmer
Periarticular 4.0mm Cancellous Screws
3.5mm/2.7mm Locking Screw Set
Item Number Description
00-2359-030-36 3.5mm Cannulated Locking Screw 30mm Lng
00-2359-035-36 3.5mm Cannulated Locking Screw 35mm Lng
00-2359-040-36 3.5mm Cannulated Locking Screw 40mm Lng
00-2359-045-36 3.5mm Cannulated Locking Screw 45mm Lng
00-2359-050-36 3.5mm Cannulated Locking Screw 50mm Lng
00-2359-055-36 3.5mm Cannulated Locking Screw 55mm Lng
00-2359-060-36 3.5mm Cannulated Locking Screw 60mm Lng
00-2359-065-36 3.5mm Cannulated Locking Screw 65mm Lng
00-2359-070-36 3.5mm Cannulated Locking Screw 70mm Lng
00-2359-075-36 3.5mm Cannulated Locking Screw 75mm Lng
00-2359-080-36 3.5mm Cannulated Locking Screw 80mm Lng
00-2359-085-36 3.5mm Cannulated Locking Screw 85mm Lng
00-2359-090-36 3.5mm Cannulated Locking Screw 90mm Lng
00-2359-030-37 3.5mm Cannulated Conical Screw 30mm Lng
00-2359-035-37 3.5mm Cannulated Conical Screw 35mm Lng
00-2359-040-37 3.5mm Cannulated Conical Screw 40mm Lng
00-2359-045-37 3.5mm Cannulated Conical Screw 45mm Lng
00-2359-050-37 3.5mm Cannulated Conical Screw 50mm Lng
00-2359-055-37 3.5mm Cannulated Conical Screw 55mm Lng
00-2359-060-37 3.5mm Cannulated Conical Screw 60mm Lng
00-2359-065-37 3.5mm Cannulated Conical Screw 65mm Lng
00-2359-070-37 3.5mm Cannulated Conical Screw 70mm Lng
00-2359-012-35 3.5mm Locking Screw 12mm Lng
00-2359-014-35 3.5mm Locking Screw 14mm Lng
00-2359-016-35 3.5mm Locking Screw 16mm Lng
00-2359-018-35 3.5mm Locking Screw 18mm Lng
00-2359-020-35 3.5mm Locking Screw 20mm Lng
00-2359-022-35 3.5mm Locking Screw 22mm Lng
00-2359-024-35 3.5mm Locking Screw 24mm Lng
00-2359-026-35 3.5mm Locking Screw 26mm Lng
00-2359-028-35 3.5mm Locking Screw 28mm Lng
00-2359-030-35 3.5mm Locking Screw 30mm Lng
00-2359-032-35 3.5mm Locking Screw 32mm Lng
00-2359-034-35 3.5mm Locking Screw 34mm Lng
00-2359-036-35 3.5mm Locking Screw 36mm Lng
00-2359-038-35 3.5mm Locking Screw 38mm Lng
00-2359-040-35 3.5mm Locking Screw 40mm Lng
00-2359-042-35 3.5mm Locking Screw 42mm Lng
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
2
3
2
2
3
3
3
3
4
4
4
4
3
4
Qty
3
3
3
Item Number Description
00-2359-044-35 3.5mm Locking Screw 44mm Lng
00-2359-046-35 3.5mm Locking Screw 46mm Lng
00-2359-048-35 3.5mm Locking Screw 48mm Lng
00-2359-050-35 3.5mm Locking Screw 50mm Lng
00-2359-052-35 3.5mm Locking Screw 52mm Lng
00-2359-054-35 3.5mm Locking Screw 54mm Lng
00-2359-056-35 3.5mm Locking Screw 56mm Lng
00-2359-058-35 3.5mm Locking Screw 58mm Lng
00-2359-060-35 3.5mm Locking Screw 60mm Lng
00-2359-065-35 3.5mm Locking Screw 65mm Lng
00-2359-070-35 3.5mm Locking Screw 70mm Lng
00-2359-010-27* 2.7mm Locking Screw 10mm Lng
00-2359-012-27* 2.7mm Locking Screw 12mm Lng
00-2359-014-27* 2.7mm Locking Screw 14mm Lng
00-2359-016-27* 2.7mm Locking Screw 16mm Lng
00-2359-018-27* 2.7mm Locking Screw 18mm Lng
00-2359-020-27* 2.7mm Locking Screw 20mm Lng
00-2359-022-27* 2.7mm Locking Screw 22mm Lng
00-2359-024-27* 2.7mm Locking Screw 24mm Lng
00-2359-026-27* 2.7mm Locking Screw 26mm Lng
00-2359-028-27* 2.7mm Locking Screw 28mm Lng
00-2359-030-27* 2.7mm Locking Screw 30mm Lng
00-2359-032-27* 2.7mm Locking Screw 32mm Lng
00-2359-034-27* 2.7mm Locking Screw 34mm Lng
00-2359-036-27* 2.7mm Locking Screw 36mm Lng
00-2359-038-27* 2.7mm Locking Screw 38mm Lng
00-2359-040-27* 2.7mm Locking Screw 40mm Lng
00-2359-042-27* 2.7mm Locking Screw 42mm Lng
00-2359-044-27* 2.7mm Locking Screw 44mm Lng
00-2359-046-27* 2.7mm Locking Screw 46mm Lng
00-2359-048-27* 2.7mm Locking Screw 48mm Lng
00-2359-050-27* 2.7mm Locking Screw 50mm Lng
00-2359-052-27* 2.7mm Locking Screw 52mm Lng
00-2359-054-27* 2.7mm Locking Screw 54mm Lng
00-2359-056-27* 2.7mm Locking Screw 56mm Lng
00-2359-058-27* 2.7mm Locking Screw 58mm Lng
00-2359-060-27* 2.7mm Locking Screw 60mm Lng
* The proximal lateral humeral locking plate is designed for use with 3.5mm screws and is not intended for use with the 2.7mm screw.
4
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
3
3
4
3
3
3
3
3
3
3
2
2
2
2
2
2
3
2
Qty
3
3
3
Ordering Information
(continued)
DISTaL raDIaL VOLar LOckIng PLaTeS
Distal Radial Locking Plate Set (Volar Plates)
00-2358-000-04
00-2358-013-02
00-2358-013-03
00-2358-013-04
00-2358-013-06
00-2358-013-08
00-2358-013-10
00-2358-014-02
00-2358-014-03
00-2358-014-04
00-2358-014-06
00-2358-014-08
00-2358-014-10
00-2358-017-02
00-2358-017-03
00-2358-017-04
00-2358-017-06
00-2358-018-02
00-2358-018-03
00-2358-018-04
00-2358-018-06
Distal Radial Locking Plate Set
Distal Volar Radial Locking Plate, Lateral Column, 2 Hole, 30mm Lng, Right
Distal Volar Radial Locking Plate, Lateral Column, 3 Hole, 39mm Lng, Right
Distal Volar Radial Locking Plate, Lateral Column, 4 Hole, 52mm Lng, Right
Distal Volar Radial Locking Plate, Lateral Column, 6 Hole, 74mm Lng, Right
Distal Volar Radial Locking Plate, Lateral Column, 8 Hole, 96mm Lng, Right
Distal Volar Radial Locking Plate, Lateral Column, 10 Hole, 118mm Lng, Right
Distal Volar Radial Locking Plate, Lateral Column, 2 Hole, 30mm Lng, Left
Distal Volar Radial Locking Plate, Lateral Column, 3 Hole, 39mm Lng, Left
Distal Volar Radial Locking Plate, Lateral Column, 4 Hole, 52mm Lng, Left
Distal Volar Radial Locking Plate, Lateral Column, 6 Hole, 74mm Lng, Left
Distal Volar Radial Locking Plate, Lateral Column, 8 Hole, 96mm Lng, Left
Distal Volar Radial Locking Plate, Lateral Column, 10 Hole, 118mm Lng, Left
Distal Volar Radial Locking Plate, Medial Column, 2 Hole 32mm Lng, Right
Distal Volar Radial Locking Plate, Medial Column, 3 Hole 40mm Lng, Right
Distal Volar Radial Locking Plate, Medial Column, 4 Hole 54mm Lng, Right
Distal Volar Radial Locking Plate, Medial Column, 6 Hole 78mm Lng, Right
Distal Volar Radial Locking Plate, Medial Column, 2 Hole 32mm Lng, Left
Distal Volar Radial Locking Plate, Medial Column, 3 Hole 40mm Lng, Left
Distal Volar Radial Locking Plate, Medial Column, 4 Hole 54mm Lng, Left
Distal Volar Radial Locking Plate, Medial Column, 6 Hole 78mm Lng, Left
2.4mm Locking Instrument Set
00-2358-000-05 2.4mm Locking Instrument Set
(Contains the following)
00-2358-045-00 Distal Radial Locking Screw and
Qty
Instrument Case
00-2360-022-18 2.0mm/1.8mm Standard Cannula
00-2360-042-24 2.4mm/1.8mm Locking Screw Depth Gauge 1
00-2360-052-24 2.4mm Locking Screw Tap
1
4
2
00-2360-062-15 1.5mm Hex Forward Captive Screwdriver, QC 2
00-2360-062-25 2.5mm Hex Forward Captive Screwdriver, QC 2
00-2360-155-18 1.8mm Standard Drill
2
1
2
2 00-2360-175-20 2.0mm QC Drill Bit
00-4806-121-24 2.4mm QC Drill Bit (for Gliding Hole)
00-4808-024-01 2.4mm/1.8mm Double Drill Sleeve
00-4811-015-00 Screwdriver Handle, ZPS Mini, Stainless
Steel
00-4901-012-15 1.25mm Dia K-Wire, One End Trocar.,
6˝ Long
00-4901-016-15 1.6mm Dia K-Wire, One end Trocar.,
6˝ long
00-2348-035-00 3.5mm Dual-Compression Drill Guide
00-4806-110-25 2.5mm Drill Bit, 110mm 2
00-4806-110-35 3.5mm Drill Bit, 110mm (for Gliding Hole) 2
2
1
00-4808-035-01 3.5mm/2.5mm Double Drill Sleeve
00-4808-035-02 3.5mm/2.5mm Drill Sleeve
00-4810-002-01 Small Depth Gauge
00-4811-035-00 T-Handle, QC
00-4811-110-35 3.5mm Tap
00-4812-001-00 Screw Forceps
00-4812-035-00 Small Hex Screwdriver, 2.5mm Hex
00-4812-035-05 Small Holding Sleeve
1
2
1
1
1
1
1
1
2
1
00-4819-051-00 Pin Cutter (Used to cut 1.8mm Locking Pegs) 1
Also Available
00-2358-027-03 Radial Styloid Locking Plate, 3 Hole, 34mm Lng, Right
00-2358-027-05 Radial Styloid Locking Plate, 5 Hole, 51mm Lng, Right
00-2358-028-03 Radial Styloid Locking Plate, 3 Hole, 34mm Lng, Left
00-2358-028-05 Radial Styloid Locking Plate, 5 Hole, 51mm Lng, Left
Periarticular Distal Radial Standard Jig Set
00-2360-000-23 Periarticular Distal Radial Standard
Jig Set (Contains the following)
00-2360-096-01 Volar Lateral Column Jig, Right
00-2360-096-02 Volar Lateral Column Jig, Left
00-2360-097-01 Volar Medial Column Jig, Right
00-2360-097-02 Volar Medial Column Jig, Left
00-2360-098-01 Dorsal T Jig, Right
00-2360-098-02 Dorsal T Jig, Left
00-2360-099-01 Dorsal Delta Jig, Right
00-2360-099-02 Dorsal Delta Jig, Left
00-2360-025-05 Dorsal Radial Plate and Jig Plate
Qty
1
1
1
1
1
1
1
1
1
Screw and Instrument Sets
00-2360-000-03 2.4mm Locking Instrument Set
00-2359-000-03 2.4mm Locking Screw Set
Compatible with:
Zimmer Periarticular 3.5mm Self-Tapping Cortical Screws with 2.7mm
Head; Zimmer 2.7mm Mini-Fragment Cortical Screws
Qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2.4mm Locking Screw Set
Item Number Description
00-2359-008-24 2.4mm Locking Screw 8mm Lng
00-2359-010-24 2.4mm Locking Screw 10mm Lng
00-2359-012-24 2.4mm Locking Screw 12mm Lng
00-2359-014-24 2.4mm Locking Screw 14mm Lng
00-2359-016-24 2.4mm Locking Screw 16mm Lng
00-2359-018-24 2.4mm Locking Screw 18mm Lng
00-2359-020-24 2.4mm Locking Screw 20mm Lng
00-2359-022-24 2.4mm Locking Screw 22mm Lng
00-2359-024-24 2.4mm Locking Screw 24mm Lng
00-2359-026-24 2.4mm Locking Screw 26mm Lng
00-2359-028-24 2.4mm Locking Screw 28mm Lng
00-2359-030-24 2.4mm Locking Screw 30mm Lng
00-2359-032-24 2.4mm Locking Screw 32mm Lng
00-2359-034-24 2.4mm Locking Screw 34mm Lng
00-2359-036-24 2.4mm Locking Screw 36mm Lng
00-2359-038-24 2.4mm Locking Screw 38mm Lng
00-2359-040-24 2.4mm Locking Screw 40mm Lng
00-2359-018-18 1.8mm Locking Peg 18mm Lng
00-2359-020-18 1.8mm Locking Peg 20mm Lng
00-2359-022-18 1.8mm Locking Peg 22mm Lng
00-2359-024-18 1.8mm Locking Peg 24mm Lng
00-2359-026-18 1.8mm Locking Peg 26mm Lng
00-2359-028-18 1.8mm Locking Peg 28mm Lng
00-2359-030-18 1.8mm Locking Peg 30mm Lng
00-2359-040-18 1.8mm Locking Peg 40mm Lng
00-2359-008-25 2.4mm Conical Screw 8mm Lng
00-2359-010-25 2.4mm Conical Screw 10mm Lng
00-2359-012-25 2.4mm Conical Screw 12mm Lng
00-2359-014-25 2.4mm Conical Screw 14mm Lng
00-2359-016-25 2.4mm Conical Screw 16mm Lng
00-2359-018-25 2.4mm Conical Screw 18mm Lng
00-2359-020-25 2.4mm Conical Screw 20mm Lng
00-2359-022-25 2.4mm Conical Screw 22mm Lng
00-2359-024-25 2.4mm Conical Screw 24mm Lng
00-2359-026-25 2.4mm Conical Screw 26mm Lng
00-2359-028-25 2.4mm Conical Screw 28mm Lng
00-2359-030-25 2.4mm Conical Screw 30mm Lng
00-2359-032-25 2.4mm Conical Screw 32mm Lng
00-2359-034-25 2.4mm Conical Screw 34mm Lng
00-2359-036-25 2.4mm Conical Screw 36mm Lng
00-2359-038-25 2.4mm Conical Screw 38mm Lng
00-2359-040-25 2.4mm Conical Screw 40mm Lng
6
6
4
6
4
4
4
4
4
4
4
4
4
4
2
2
2
2
4
2
4
4
4
4
6
6
6
6
Qty
4
4
4
2
2
4
4
4
4
6
4
2
2
2
Existing Screws Included In Set No. 00-2359-000-03
Item Number Description
00-2348-008-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 8mm Lng
00-2348-010-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 10mm Lng
00-2348-012-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 12mm Lng
00-2348-014-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 14mm Lng
00-2348-016-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 16mm Lng
00-2348-018-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 18mm Lng
00-2348-020-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 20mm Lng
00-2348-022-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 22mm Lng
00-2348-024-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 24mm Lng
00-2348-026-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 26mm Lng
00-2348-028-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 28mm Lng
00-2348-030-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 30mm Lng
00-2348-032-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 32mm Lng
00-2348-034-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 34mm Lng
00-2348-036-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 36mm Lng
00-2348-038-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 38mm Lng
00-2348-040-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 40mm Lng
Qty
4
4
4
4
4
6
6
6
6
6
6
6
6
6
6
4
4
Ordering Information
(continued)
DISTaL raDIaL DOrSaL LOckIng PLaTeS
Distal Radial Locking Plate Set (Dorsal T-Plates)
00-2358-000-04
00-2358-021-02
00-2358-021-03
00-2358-021-04
00-2358-021-06
00-2358-021-08
00-2358-021-10
00-2358-022-02
00-2358-022-03
00-2358-022-04
00-2358-022-06
00-2358-022-08
00-2358-022-10
00-2358-025-01
00-2358-025-02
00-2358-025-04
00-2358-025-06
00-2358-025-08
00-2358-025-10
00-2358-026-01
00-2358-026-02
00-2358-026-04
00-2358-026-06
00-2358-026-08
00-2358-026-10
Distal Radial Locking Plate Set
Distal Dorsal T Radial Locking Plate, 2 Hole, 36mm Lng, Right
Distal Dorsal T Radial Locking Plate, 3 Hole, 44mm Lng, Right
Distal Dorsal T Radial Locking Plate, 4 Hole, 56mm Lng, Right
Distal Dorsal T Radial Locking Plate, 6 Hole, 77mm Lng, Right
Distal Dorsal T Radial Locking Plate, 8 Hole, 98mm Lng, Right
Distal Dorsal T Radial Locking Plate, 10 Hole, 119mm Lng, Right
Distal Dorsal T Radial Locking Plate, 2 Hole, 36mm Lng, Left
Distal Dorsal T Radial Locking Plate, 3 Hole, 44mm Lng, Left
Distal Dorsal T Radial Locking Plate, 4 Hole, 56mm Lng, Left
Distal Dorsal T Radial Locking Plate, 6 Hole, 77mm Lng, Left
Distal Dorsal T Radial Locking Plate, 8 Hole, 98mm Lng, Left
Distal Dorsal T Radial Locking Plate, 10 Hole, 119mm Lng, Left
Distal Dorsal Delta Radial Locking Plate, 1 Hole, 40mm Lng, Right
Distal Dorsal Delta Radial Locking Plate, 2 Hole, 52mm Lng, Right
Distal Dorsal Delta Radial Locking Plate, 4 Hole, 74mm Lng, Right
Distal Dorsal Delta Radial Locking Plate, 6 Hole, 95mm Lng, Right
Distal Dorsal Delta Radial Locking Plate, 8 Hole, 117mm Lng, Right
Distal Dorsal Delta Radial Locking Plate, 10 Hole, 138mm Lng, Right
Distal Dorsal Delta Radial Locking Plate, 1 Hole, 40mm Lng, Left
Distal Dorsal Delta Radial Locking Plate, 2 Hole, 52mm Lng, Left
Distal Dorsal Delta Radial Locking Plate, 4 Hole, 74mm Lng, Left
Distal Dorsal Delta Radial Locking Plate, 6 Hole, 95mm Lng, Left
Distal Dorsal Delta Radial Locking Plate, 8 Hole, 117mm Lng, Left
Distal Dorsal Delta Radial Locking Plate, 10 Hole, 138mm Lng, Left
2.4mm Locking Instrument Set
00-2360-000-03 2.4mm Locking Instrument Set
(Contains the following)
Qty
00-2358-045-00 Distal Radial Locking Screw and Instrument
Case
00-2360-022-18 2.0mm/1.8mm Standard Cannula
00-2360-042-24 2.4mm/1.8mm Locking Screw Depth Gauge 1
1
4
2 00-2360-052-24 2.4mm Locking Screw Tap
00-2360-062-15 1.5mm Hex Forward Captive Screwdriver,
QC
00-2360-062-25 2.5mm Hex Forward Captive Screwdriver,
2
QC
00-2360-155-18 1.8mm Standard Drill
00-2360-175-20 2.0mm QC Drill Bit
00-4806-121-24 2.4mm QC Drill Bit (for Gliding Hole)
00-4808-024-01 2.4mm/1.8mm Double Drill Sleeve
00-4811-015-00 Screwdriver Handle, ZPS Mini, Stainless
Steel
00-4901-012-15 1.25mm Dia K-Wire, One End Trocar.,
2
2
2
2
1
1
6˝ Long
00-4901-016-15 1.6mm Dia K-Wire, One End Trocar.,
6˝ Long
00-2348-035-00 3.5mm Dual-Compression Drill Guide
2
00-4806-110-25 2.5mm Drill Bit, 110mm 2
00-4806-110-35 3.5mm Drill Bit, 110mm (for Gliding Hole) 2
2
1
00-4808-035-01 3.5mm/2.5mm Double Drill Sleeve
00-4808-035-02 3.5mm/2.5mm Drill Sleeve
00-4810-002-01 Small Depth Gauge
00-4811-035-00 T-Handle, QC
00-4811-110-35 3.5mm Tap
00-4812-001-00 Screw Forceps
00-4812-035-00 Small Hex Screwdriver, 2.5mm Hex
00-4812-035-05 Small Holding Sleeve
00-4819-051-00 Pin Cutter (Used to cut 1.8mm Locking Pegs) 1
00-4812-015-05 Mini Holding Sleeve
00-4812-015-01 Mini Hex Screwdriver Shaft
1
1
1
1
2
1
1
1
1
1
Periarticular Distal Radial Standard Jig Set
00-2360-000-23 Periarticular Distal Radial Standard
Jig Set (Contains the following)
00-2360-096-01 Volar Lateral Column Jig, Right
00-2360-096-02 Volar Lateral Column Jig, Left
00-2360-097-01 Volar Medial Column Jig, Right
00-2360-097-02 Volar Medial Column Jig, Left
00-2360-098-01 Dorsal T Jig, Right
00-2360-098-02 Dorsal T Jig, Left
00-2360-099-01 Dorsal Delta Jig, Right
00-2360-099-02 Dorsal Delta Jig, Left
00-2360-025-05 Dorsal Radial Plate and Jig Plate
Screw and Instrument Sets
00-2360-000-03 2.4mm Locking Instrument Set
00-2359-000-03 2.4mm Locking Screw Set
Compatible with:
1
1
1
1
1
1
1
1
1
Qty
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Qty
Zimmer Periarticular 3.5mm Self-Tapping Cortical Screws with 2.7mm Head; Zimmer 2.7mm Mini-Fragment Cortical Screws;
Zimmer Small-Fragment Instrument Set
2.4mm Locking Screw Set
Item Number Description
00-2359-008-24 2.4mm Locking Screw 8mm Lng
00-2359-010-24 2.4mm Locking Screw 10mm Lng
00-2359-012-24 2.4mm Locking Screw 12mm Lng
00-2359-014-24 2.4mm Locking Screw 14mm Lng
00-2359-016-24 2.4mm Locking Screw 16mm Lng
00-2359-018-24 2.4mm Locking Screw 18mm Lng
00-2359-020-24 2.4mm Locking Screw 20mm Lng
00-2359-022-24 2.4mm Locking Screw 22mm Lng
00-2359-024-24 2.4mm Locking Screw 24mm Lng
00-2359-026-24 2.4mm Locking Screw 26mm Lng
00-2359-028-24 2.4mm Locking Screw 28mm Lng
00-2359-030-24 2.4mm Locking Screw 30mm Lng
00-2359-032-24 2.4mm Locking Screw 32mm Lng
00-2359-034-24 2.4mm Locking Screw 34mm Lng
00-2359-036-24 2.4mm Locking Screw 36mm Lng
00-2359-038-24 2.4mm Locking Screw 38mm Lng
00-2359-040-24 2.4mm Locking Screw 40mm Lng
00-2359-018-18 1.8mm Locking Peg 18mm Lng
00-2359-020-18 1.8mm Locking Peg 20mm Lng
00-2359-022-18 1.8mm Locking Peg 22mm Lng
00-2359-024-18 1.8mm Locking Peg 24mm Lng
00-2359-026-18 1.8mm Locking Peg 26mm Lng
00-2359-028-18 1.8mm Locking Peg 28mm Lng
00-2359-030-18 1.8mm Locking Peg 30mm Lng
00-2359-040-18 1.8mm Locking Peg 40mm Lng
00-2359-008-25 2.4mm Conical Screw 8mm Lng
00-2359-010-25 2.4mm Conical Screw 10mm Lng
00-2359-012-25 2.4mm Conical Screw 12mm Lng
00-2359-014-25 2.4mm Conical Screw 14mm Lng
00-2359-016-25 2.4mm Conical Screw 16mm Lng
00-2359-018-25 2.4mm Conical Screw 18mm Lng
00-2359-020-25 2.4mm Conical Screw 20mm Lng
00-2359-022-25 2.4mm Conical Screw 22mm Lng
00-2359-024-25 2.4mm Conical Screw 24mm Lng
00-2359-026-25 2.4mm Conical Screw 26mm Lng
00-2359-028-25 2.4mm Conical Screw 28mm Lng
00-2359-030-25 2.4mm Conical Screw 30mm Lng
00-2359-032-25 2.4mm Conical Screw 32mm Lng
00-2359-034-25 2.4mm Conical Screw 34mm Lng
00-2359-036-25 2.4mm Conical Screw 36mm Lng
00-2359-038-25 2.4mm Conical Screw 38mm Lng
00-2359-040-25 2.4mm Conical Screw 40mm Lng
6
6
4
6
4
4
4
4
4
4
4
4
4
4
2
2
2
2
4
2
4
4
4
4
6
6
6
6
Qty
4
4
4
2
2
4
4
4
4
6
4
2
2
2
Existing Screws Included in Set No. 00-2359-000-03
Item Number Description
00-2348-008-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 8mm Lng
00-2348-010-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 10mm Lng
00-2348-012-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 12mm Lng
00-2348-014-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 14mm Lng
00-2348-016-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 16mm Lng
00-2348-018-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 18mm Lng
00-2348-020-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 20mm Lng
00-2348-022-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 22mm Lng
00-2348-024-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 24mm Lng
00-2348-026-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 26mm Lng
00-2348-028-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 28mm Lng
00-2348-030-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 30mm Lng
00-2348-032-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 32mm Lng
00-2348-034-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 34mm Lng
00-2348-036-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 36mm Lng
00-2348-038-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 38mm Lng
00-2348-040-35 3.5mm Cortical Self-Tapping (2.7mm Head)
Screw 40mm Lng
4
4
6
4
4
4
6
6
6
6
6
6
6
6
4
6
Qty
4
Ordering Information
(continued)
DISTaL LaTeraL FeMOraL LOckIng PLaTeS
5.5mm Distal Lateral Femoral Locking Plates
Left Right
00-2357-102-06
00-2357-102-10
00-2357-101-06
00-2357-101-10
00-2357-102-14
00-2357-102-18
00-2357-101-14
00-2357-101-18
Description
Distal Lateral Femoral Locking Plate
Distal Lateral Femoral Locking Plate
Distal Lateral Femoral Locking Plate
Distal Lateral Femoral Locking Plate
Holes
6
10
14
18
Length
159mm
223mm
287mm
349mm
5.5mm/4.5mm Periarticular Locking Instrument Set
00-2360-000-01 5.5mm/4.5mm Periarticular Locking
Instrument Set (Contains the following)
00-1147-073-00 Cleaning Stylet
Qty
00-1147-078-00 Cleaning Brush
00-2358-035-00 5.5mm/4.5mm Locking Screw and
Instrument Case 1
00-2360-012-01 5.5mm/4.5mm Plate Reduction Instrument 2
1
1
00-2360-012-02 5.5mm/4.5mm Plate Reduction Sleeve
00-2360-012-03 Plate Reduction Spin Knob
00-2360-020-37 3.7mm Standard Cannula
00-2360-021-32 3.2mm Standard Cannula
00-2360-033-32 3.2mm Standard Drill-Tip Guide Wire
(5 per Box)
00-2360-040-45 4.5mm Locking Screw Standard
Depth Gauge
00-2360-041-55 5.5mm Cannulated Locking Screw
Depth Gauge
00-2360-053-45 4.5mm Locking Screw Tap
00-2360-054-55 5.5mm Cannulated Locking Screw Tap
00-2360-065-05 5.0mm Screwdriver Stop Ring
00-2360-065-50 5.0mm Hex Standard Screwdriver
00-2360-066-50 5.0mm Hex Standard Cannulated
Screwdriver
2 Bx
1
00-2360-071-47 4.7mm Standard Cannulated Drill
00-2360-080-00 Torque-Limiting Attachment
00-2360-085-00 Guide-Wire Inserter
00-2360-086-00 Modular Handle
00-2360-087-00 Ratcheting Modular Handle
00-2360-088-00 5.5mm/4.5mm Cannula Inserter
00-2360-090-04 5.5mm/4.5mm Standard Jig Sleeve
00-2360-225-37 3.7mm Standard Drill 2
00-2360-050-50 5.0mm Hex Forward Captive Screwdriver 0
00-2360-051-50 5.0mm Hex Cannulated Forward Captive
Screwdriver 0
1
4
1
1
1
1
2
2
1
2
2
1 Bx
2
4
4
2
2
5.5mm/4.5mm Locking Screw Set
Item Number Description
00-2359-050-55 5.5mm Cannulated Locking Screw 50mm Lng
00-2359-055-55 5.5mm Cannulated Locking Screw 55mm Lng
00-2359-060-55 5.5mm Cannulated Locking Screw 60mm Lng
00-2359-065-55 5.5mm Cannulated Locking Screw 65mm Lng
00-2359-070-55 5.5mm Cannulated Locking Screw 70mm Lng
00-2359-075-55 5.5mm Cannulated Locking Screw 75mm Lng
00-2359-080-55 5.5mm Cannulated Locking Screw 80mm Lng
00-2359-085-55 5.5mm Cannulated Locking Screw 85mm Lng
00-2359-090-55 5.5mm Cannulated Locking Screw 90mm Lng
00-2359-095-55 5.5mm Cannulated Locking Screw 95mm Lng 2
00-2359-100-55 5.5mm Cannulated Locking Screw 100mm Lng 2
4
2
00-2359-050-56 5.5mm Cannulated Conical Screw 50mm Lng
00-2359-055-56 5.5mm Cannulated Conical Screw 55mm Lng
00-2359-060-56 5.5mm Cannulated Conical Screw 60mm Lng
00-2359-065-56 5.5mm Cannulated Conical Screw 65mm Lng
4
4
4
4
Qty
4
4
4
00-2359-070-56 5.5mm Cannulated Conical Screw 70mm Lng
00-2359-075-56 5.5mm Cannulated Conical Screw 75mm Lng
00-2359-080-56 5.5mm Cannulated Conical Screw 80mm Lng
00-2359-085-56 5.5mm Cannulated Conical Screw 85mm Lng
00-2359-090-56 5.5mm Cannulated Conical Screw 90mm Lng
00-2359-012-45 4.5mm Locking Screw 12mm Lng
00-2359-014-45 4.5mm Locking Screw 14mm Lng
2
2
2
2
2
2
2
2
2
2
2
Periarticular Distal Lateral Femoral Locking Plate Set
00-2357-000-13 Periarticular Distal Lateral Femoral Locking
Plate Set (Contains the following)
00-2357-102-06 Distal Lateral Femoral Locking Plate, 6 Hole, Left
00-2357-102-10 Distal Lateral Femoral Locking Plate, 10 Hole, Left
00-2357-102-14 Distal Lateral Femoral Locking Plate, 14 Hole, Left
00-2357-102-18 Distal Lateral Femoral Locking Plate, 18 Hole, Left
00-2357-101-06 Distal Lateral Femoral Locking Plate, 6 Hole, Right
00-2357-101-10 Distal Lateral Femoral Locking Plate, 10 Hole, Right
00-2357-101-14 Distal Lateral Femoral Locking Plate, 14 Hole, Right
00-2357-101-18 Distal Lateral Femoral Locking Plate, 18 Hole, Right
Qty
Periarticular Distal Lateral Femoral Plate Standard Jig Set
00-2360-000-11 Periarticular Distal Lateral Femoral Plate Standard
Jig Set (Contains the following)
00-2360-090-01 Distal Lateral Femoral Plate Jig, Right
00-2360-090-02 Distal Lateral Femoral Plate Jig, Left
00-2358-010-00 Distal Lateral Femoral Plate Jig Case
Screw and Instrument Sets
00-2359-000-01 5.5mm/4.5mm Locking Screw Set
Compatible with:
Zimmer Periarticular 4.5mm Self-Tapping Cortical Screws;
Zimmer Periarticular 6.5mm Cancellous Screws; Zimmer Basic
Instrument Set; Zimmer Standard Screw Set
Qty
1
1
1
1
1
1
1
1
1
1
1
Item Number Description
00-2359-016-45 4.5mm Locking Screw 16mm Lng
00-2359-018-45 4.5mm Locking Screw 18mm Lng
00-2359-020-45 4.5mm Locking Screw 20mm Lng
00-2359-022-45 4.5mm Locking Screw 22mm Lng
00-2359-024-45 4.5mm Locking Screw 24mm Lng
00-2359-026-45 4.5mm Locking Screw 26mm Lng
00-2359-028-45 4.5mm Locking Screw 28mm Lng
00-2359-030-45 4.5mm Locking Screw 30mm Lng
00-2359-032-45 4.5mm Locking Screw 32mm Lng
00-2359-034-45 4.5mm Locking Screw 34mm Lng
00-2359-036-45 4.5mm Locking Screw 36mm Lng
00-2359-038-45 4.5mm Locking Screw 38mm Lng
00-2359-040-45 4.5mm Locking Screw 40mm Lng
00-2359-042-45 4.5mm Locking Screw 42mm Lng
00-2359-044-45 4.5mm Locking Screw 44mm Lng
00-2359-046-45 4.5mm Locking Screw 46mm Lng
00-2359-048-45 4.5mm Locking Screw 48mm Lng
00-2359-050-45 4.5mm Locking Screw 50mm Lng
00-2359-055-45 4.5mm Locking Screw 55mm Lng
00-2359-060-45 4.5mm Locking Screw 60mm Lng
00-2359-065-45 4.5mm Locking Screw 65mm Lng
00-2359-070-45 4.5mm Locking Screw 70mm Lng
4
4
4
4
4
4
4
4
2
4
2
2
Qty
2
2
2
2
2
2
4
4
4
4
PrOxIMaL LaTeraL TIbIaL LOckIng PLaTeS
5.5mm Proximal Lateral Tibial Locking Plates
Left
00-2357-006-04
00-2357-006-06
00-2357-006-08
00-2357-006-10
00-2357-006-12
00-2357-006-14
Right
00-2357-005-04
00-2357-005-06
00-2357-005-08
00-2357-005-10
00-2357-005-12
00-2357-005-14
5.5mm/4.5mm Periarticular Locking Instrument Set
00-2360-000-01 5.5mm/4.5mm Periarticular Locking
Instrument Set (Contains the following)
Qty
00-1147-073-00 Cleaning Stylet
00-1147-078-00 Cleaning Brush
00-2358-035-00 5.5mm/4.5mm Locking Screw and
Instrument Case 1
00-2360-012-01 5.5mm/4.5mm Plate Reduction Instrument 2
00-2360-012-02 5.5mm/4.5mm Plate Reduction Sleeve
00-2360-012-03 Plate Reduction Spin Knob
1
1
4
4
2
2
00-2360-020-37 3.7mm Standard Cannula
00-2360-021-32 3.2mm Standard Cannula
00-2360-033-32 3.2mm Standard Drill-Tip Guide Wire
(5 per Box)
00-2360-040-45 4.5mm Locking Screw Standard
Depth Gauge
00-2360-041-55 5.5mm Cannulated Locking Screw
Depth Gauge
00-2360-053-45 4.5mm Locking Screw Tap
00-2360-054-55 5.5mm Cannulated Locking Screw Tap
00-2360-065-05 5.0mm Screwdriver Stop Ring
00-2360-065-50 5.0mm Hex Standard Screwdriver
00-2360-066-50 5.0mm Hex Standard Cannulated
Screwdriver
00-2360-071-47 4.7mm Standard Cannulated Drill
00-2360-080-00 Torque-Limiting Attachment
2 Bx
1
00-2360-085-00 Guide-Wire Inserter
00-2360-086-00 Modular Handle
00-2360-087-00 Ratcheting Modular Handle
00-2360-088-00 5.5mm/4.5mm Cannula Inserter
00-2360-090-04 5.5mm/4.5mm Standard Jig Sleeve
00-2360-225-37 3.7mm Standard Drill 2
00-2360-050-50 5.0mm Hex Forward Captive Screwdriver 0
00-2360-051-50 5.0mm Hex Cannulated Forward Captive
Screwdriver 0
1
4
1
1
1
1
2
2
1
2
2
1 Bx
2
Description
5.5mm Proximal Lateral Tibial Locking Plate
5.5mm Proximal Lateral Tibial Locking Plate
5.5mm Proximal Lateral Tibial Locking Plate
5.5mm Proximal Lateral Tibial Locking Plate
5.5mm Proximal Lateral Tibial Locking Plate
5.5mm Proximal Lateral Tibial Locking Plate
Holes
4
6
8
10
12
14
Length
97mm
128mm
158mm
189mm
219mm
250mm
5.5mm Proximal Lateral Tibial Locking Plate Set
00-2357-000-08 5.5mm Proximal Lateral Tibial Locking Plate Set
Qty
(Contains the following)
00-2357-006-00 5.5mm Proximal Lateral Tibial Locking Plate, 4 Hole, Left 1
00-2357-006-06 5.5mm Proximal Lateral Tibial Locking Plate, 6 Hole, Left 1
00-2357-006-08 5.5mm Proximal Lateral Tibial Locking Plate, 8 Hole, Left 1
00-2357-006-10 5.5mm Proximal Lateral Tibial Locking Plate, 10 Hole, Left 1
00-2357-006-12 5.5mm Proximal Lateral Tibial Locking Plate, 12 Hole, Left 1
00-2357-006-14 5.5mm Proximal Lateral Tibial Locking Plate, 14 Hole, Left 1
00-2357-005-04 5.5mm Proximal Lateral Tibial Locking Plate, 4 Hole, Right 1
00-2357-005-06 5.5mm Proximal Lateral Tibial Locking Plate, 6 Hole, Right 1
00-2357-005-08 5.5mm Proximal Lateral Tibial Locking Plate, 8 Hole, Right 1
00-2357-005-10 5.5mm Proximal Lateral Tibial Locking Plate, 10 Hole, Right 1
00-2357-005-12 5.5mm Proximal Lateral Tibial Locking Plate, 12 Hole, Right 1
00-2357-005-14 5.5mm Proximal Lateral Tibial Locking Plate, 14 Hole, Right 1
5.5mm Proximal Tibial Standard Jig Set Qty
00-2360-000-12 5.5mm Proximal Tibial Standard Jig Set (Contains the following)
00-2360-091-01 5.5mm Proximal Lateral Tibial Plate Jig, Right
00-2360-091-02 5.5mm Proximal Lateral Tibial Plate Jig, Left
00-2358-015-00 5.5mm Proximal Lateral Tibial Plate and Jig Case
1
1
1
Screw and Instrument Sets
00-2360-000-01 5.5mm/4.5mm Periarticular Locking Instrument Set
00-2359-000-01 5.5mm/4.5mm Locking Screw Set
Compatible with:
Zimmer Periarticular 4.5mm Self-Tapping Cortical Screws;
Zimmer Periarticular 6.5mm Cancellous Screws; Zimmer Basic
Instrument Set; Zimmer Standard Screw Set
5.5mm/4.5mm Locking Screw Set
Item Number Description
00-2359-050-55 5.5mm Cannulated Locking Screw 50mm Lng
00-2359-055-55 5.5mm Cannulated Locking Screw 55mm Lng
00-2359-060-55 5.5mm Cannulated Locking Screw 60mm Lng
00-2359-065-55 5.5mm Cannulated Locking Screw 65mm Lng
00-2359-070-55 5.5mm Cannulated Locking Screw 70mm Lng
00-2359-075-55 5.5mm Cannulated Locking Screw 75mm Lng
00-2359-080-55 5.5mm Cannulated Locking Screw 80mm Lng
00-2359-085-55 5.5mm Cannulated Locking Screw 85mm Lng
00-2359-090-55 5.5mm Cannulated Locking Screw 90mm Lng
00-2359-095-55 5.5mm Cannulated Locking Screw 95mm Lng 2
00-2359-100-55 5.5mm Cannulated Locking Screw 100mm Lng 2
4
2
00-2359-050-56 5.5mm Cannulated Conical Screw 50mm Lng
00-2359-055-56 5.5mm Cannulated Conical Screw 55mm Lng
00-2359-060-56 5.5mm Cannulated Conical Screw 60mm Lng
00-2359-065-56 5.5mm Cannulated Conical Screw 65mm Lng
4
4
4
4
Qty
4
4
4
00-2359-070-56 5.5mm Cannulated Conical Screw 70mm Lng
00-2359-075-56 5.5mm Cannulated Conical Screw 75mm Lng
00-2359-080-56 5.5mm Cannulated Conical Screw 80mm Lng
00-2359-085-56 5.5mm Cannulated Conical Screw 85mm Lng
00-2359-090-56 5.5mm Cannulated Conical Screw 90mm Lng
00-2359-012-45 4.5mm Locking Screw 12mm Lng
00-2359-014-45 4.5mm Locking Screw 14mm Lng
2
2
2
2
2
2
2
2
2
2
2
Item Number Description
00-2359-016-45 4.5mm Locking Screw 16mm Lng
00-2359-018-45 4.5mm Locking Screw 18mm Lng
00-2359-020-45 4.5mm Locking Screw 20mm Lng
00-2359-022-45 4.5mm Locking Screw 22mm Lng
00-2359-024-45 4.5mm Locking Screw 24mm Lng
00-2359-026-45 4.5mm Locking Screw 26mm Lng
00-2359-028-45 4.5mm Locking Screw 28mm Lng
00-2359-030-45 4.5mm Locking Screw 30mm Lng
00-2359-032-45 4.5mm Locking Screw 32mm Lng
00-2359-034-45 4.5mm Locking Screw 34mm Lng
00-2359-036-45 4.5mm Locking Screw 36mm Lng
00-2359-038-45 4.5mm Locking Screw 38mm Lng
00-2359-040-45 4.5mm Locking Screw 40mm Lng
00-2359-042-45 4.5mm Locking Screw 42mm Lng
00-2359-044-45 4.5mm Locking Screw 44mm Lng
00-2359-046-45 4.5mm Locking Screw 46mm Lng
00-2359-048-45 4.5mm Locking Screw 48mm Lng
00-2359-050-45 4.5mm Locking Screw 50mm Lng
00-2359-055-45 4.5mm Locking Screw 55mm Lng
00-2359-060-45 4.5mm Locking Screw 60mm Lng
00-2359-065-45 4.5mm Locking Screw 65mm Lng
00-2359-070-45 4.5mm Locking Screw 70mm Lng
4
4
4
4
4
4
4
4
2
4
2
2
Qty
2
2
2
2
2
2
4
4
4
4
Ordering Information
(continued)
DISTaL TIbIaL LOckIng PLaTeS
3.5mm Distal Medial Tibial Locking Plates
Left
00-2357-008-06
00-2357-008-08
00-2357-008-10
00-2357-008-14
00-2357-008-18
Right
00-2357-007-06
00-2357-007-08
00-2357-007-10
00-2357-007-14
00-2357-007-18
3.5mm Distal Lateral Tibial Locking Plates
Left
00-2357-010-06
00-2357-010-08
00-2357-010-10
00-2357-010-14
00-2357-010-18
Right
00-2357-009-06
00-2357-009-08
00-2357-009-10
00-2357-009-14
00-2357-009-18
Description
Distal Medial Tibial Locking Plate
Distal Medial Tibial Locking Plate
Distal Medial Tibial Locking Plate
Distal Medial Tibial Locking Plate
Distal Medial Tibial Locking Plate
Description
Distal Lateral Tibial Locking Plate
Distal Lateral Tibial Locking Plate
Distal Lateral Tibial Locking Plate
Distal Lateral Tibial Locking Plate
Distal Lateral Tibial Locking Plate
Holes
6
8
10
14
18
Holes
6
8
10
14
18
Length
120mm
144mm
168mm
216mm
264mm
Length
94mm
118mm
142mm
189mm
237mm
3.5mm/2.7mm Periarticular Locking Instrument Set
00-2360-000-02 3.5mm/2.7mm Periarticular Locking
Instrument Set (Contains the following)
00-1147-071-00 Cleaning Stylet
Qty
00-1147-076-00 Cleaning Brush
00-2358-040-00 3.5mm/2.7mm Locking Screw and Instrument
1
1
1 Case
00-2360-011-01 3.5mm/2.7mm Locking Plate Reduction
Instrument
00-2360-011-02 3.5mm/2.7mm Locking Plate Reduction
Sleeve
00-2360-012-03 Plate Reduction Spin Knob
00-2360-020-20 2.0mm Standard Cannula
00-2360-020-27 2.7mm Standard Cannula
00-2360-021-16 1.6mm Standard Cannula
00-2360-033-16 1.6mm Standard Drill-Tip Guide Wire
(5 per Box)
00-2360-040-35 3.5mm/2.7mm Locking Screw Standard
Depth Gauge
00-2360-041-35 3.5mm Cannulated Locking Screw
Depth Gauge
00-2360-053-27 2.7mm Locking Screw Tap
2
2 Bx
1
00-2360-053-35 3.5mm Locking Screw Tap
00-2360-054-35 3.5mm Cannulated Locking Screw Tap
00-2360-065-00 2.5mm Screwdriver Stop Ring
00-2360-065-25 2.5mm Hex Standard Screwdriver
00-2360-066-25 2.5mm Hex Standard Cannulated
Screwdriver
00-2360-071-27 2.7mm Standard Cannulated Drill
00-2360-080-00 Torque-Limiting Attachment
00-2360-086-00 Modular Handle
00-2360-088-00 3.5mm/2.7mm Cannula Inserter
00-2360-175-20 2.0mm Standard Drill
00-2360-205-27 2.7mm Standard Drill
00-4812-045-00 Large Hex Screwdriver
00-2360-050-25 2.5mm Hex Forward Captive Screwdriver 0
00-2360-051-25 2.5mm Hex Cannulated Forward Captive
Screwdriver 0
2
1
1
2
1
1
2
2
2
2
1
2
1
2
4
4
2
2
4
Compatible with:
Zimmer Periarticular 3.5mm Self-Tapping Cortical
Screws; Zimmer Periarticular 4.0mm Cancellous Screws;
Zimmer Small-Fragment Instrument Set; Zimmer Small-
Fragment Screw Set
Distal Tibial Locking Plate Set
00-2357-000-10 Distal Tibial Locking Plate Set (Contains the following)
Qty
00-2357-008-06 Distal Medial Tibial Locking Plate, 6 Hole, 120mm Lng, Left 1
00-2357-008-08 Distal Medial Tibial Locking Plate, 8 Hole, 144mm Lng, Left 1
00-2357-008-10 Distal Medial Tibial Locking Plate, 10 Hole, 168mm Lng,
Left
00-2357-008-14 Distal Medial Tibial Locking Plate, 14 Hole, 216mm Lng,
1
Left
00-2357-008-18 Distal Medial Tibial Locking Plate, 18 Hole, 264mm Lng,
1
Left Loaner Bank
00-2357-007-06 Distal Medial Tibial Locking Plate, 6 Hole, 120mm Lng,
1 Right
00-2357-007-08 Distal Medial Tibial Locking Plate, 8 Hole, 144mm Lng,
Right
00-2357-007-10 Distal Medial Tibial Locking Plate, 10 Hole, 168mm Lng,
Right
00-2357-007-14 Distal Medial Tibial Locking Plate, 14 Hole, 216mm Lng,
Right
00-2357-007-18 Distal Medial Tibial Locking Plate, 18 Hole, 264mm Lng,
1
1
1
Right Loaner Bank
00-2357-010-06 Distal Lateral Tibial Locking Plate, 6 Hole, 94mm Lng, Left 1
00-2357-010-08 Distal Lateral Tibial Locking Plate, 8 Hole, 118mm Lng,
1 Left
00-2357-010-10 Distal Lateral Tibial Locking Plate, 10 Hole, 142mm Lng,
Left
00-2357-010-14 Distal Lateral Tibial Locking Plate, 14 Hole, 189mm Lng,
1
Left
00-2357-010-18 Distal Lateral Tibial Locking Plate, 18 Hole, 237mm Lng,
1
Left Loaner Bank
00-2357-009-06 Distal Lateral Tibial Locking Plate, 6 Hole, 94mm Lng,
1 Right
00-2357-009-08 Distal Lateral Tibial Locking Plate, 8 Hole, 118mm Lng,
Right
00-2357-009-10 Distal Lateral Tibial Locking Plate, 10 Hole, 142mm Lng,
1
Right
00-2357-009-14 Distal Lateral Tibial Locking Plate, 14 Hole, 189mm Lng,
Right
00-2357-009-18 Distal Lateral Tibial Locking Plate, 18 Hole, 237mm Lng,
Right
1
1
Loaner Bank
Distal Tibial Standard Jig Set
00-2360-000-13 Distal Tibial Standard Jig Set (Contains the following)
00-2360-094-01 Distal Medial Tibial Plate Jig, Right
00-2360-094-02 Distal Medial Tibial Plate Jig, Left
00-2360-095-01 Distal Lateral Tibial Plate Jig, Right
00-2360-095-02 Distal Lateral Tibial Plate Jig, Left
00-2358-020-00 Distal Tibial Plate and Jig Case
Qty
1
1
1
1
1
Screw and Instrument Sets
00-2360-000-02 3.5mm/2.7mm Periarticular Locking Instrument Set
00-2359-000-02 3.5mm/2.7mm Locking Screw Set
3.5mm/2.7mm Locking Screw Set
Item Number Description
00-2359-030-36 3.5mm Cannulated Locking Screw 30mm Lng
00-2359-035-36 3.5mm Cannulated Locking Screw 35mm Lng
00-2359-040-36 3.5mm Cannulated Locking Screw 40mm Lng
00-2359-045-36 3.5mm Cannulated Locking Screw 45mm Lng
00-2359-050-36 3.5mm Cannulated Locking Screw 50mm Lng
00-2359-055-36 3.5mm Cannulated Locking Screw 55mm Lng
00-2359-060-36 3.5mm Cannulated Locking Screw 60mm Lng
00-2359-065-36 3.5mm Cannulated Locking Screw 65mm Lng
00-2359-070-36 3.5mm Cannulated Locking Screw 70mm Lng
00-2359-075-36 3.5mm Cannulated Locking Screw 75mm Lng
00-2359-080-36 3.5mm Cannulated Locking Screw 80mm Lng
00-2359-085-36 3.5mm Cannulated Locking Screw 85mm Lng
00-2359-090-36 3.5mm Cannulated Locking Screw 90mm Lng
00-2359-030-37 3.5mm Cannulated Conical Screw 30mm Lng
00-2359-035-37 3.5mm Cannulated Conical Screw 35mm Lng
00-2359-040-37 3.5mm Cannulated Conical Screw 40mm Lng
00-2359-045-37 3.5mm Cannulated Conical Screw 45mm Lng
00-2359-050-37 3.5mm Cannulated Conical Screw 50mm Lng
00-2359-055-37 3.5mm Cannulated Conical Screw 55mm Lng
00-2359-060-37 3.5mm Cannulated Conical Screw 60mm Lng
00-2359-065-37 3.5mm Cannulated Conical Screw 65mm Lng
00-2359-070-37 3.5mm Cannulated Conical Screw 70mm Lng
00-2359-012-35 3.5mm Locking Screw 12mm Lng
00-2359-014-35 3.5mm Locking Screw 14mm Lng
00-2359-016-35 3.5mm Locking Screw 16mm Lng
00-2359-018-35 3.5mm Locking Screw 18mm Lng
00-2359-020-35 3.5mm Locking Screw 20mm Lng
00-2359-022-35 3.5mm Locking Screw 22mm Lng
00-2359-024-35 3.5mm Locking Screw 24mm Lng
00-2359-026-35 3.5mm Locking Screw 26mm Lng
00-2359-028-35 3.5mm Locking Screw 28mm Lng
00-2359-030-35 3.5mm Locking Screw 30mm Lng
00-2359-032-35 3.5mm Locking Screw 32mm Lng
00-2359-034-35 3.5mm Locking Screw 34mm Lng
00-2359-036-35 3.5mm Locking Screw 36mm Lng
00-2359-038-35 3.5mm Locking Screw 38mm Lng
00-2359-040-35 3.5mm Locking Screw 40mm Lng
00-2359-042-35 3.5mm Locking Screw 42mm Lng
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
2
3
2
2
3
3
3
3
4
4
4
4
3
4
Qty
3
3
3
Item Number Description
00-2359-044-35 3.5mm Locking Screw 44mm Lng
00-2359-046-35 3.5mm Locking Screw 46mm Lng
00-2359-048-35 3.5mm Locking Screw 48mm Lng
00-2359-050-35 3.5mm Locking Screw 50mm Lng
00-2359-052-35 3.5mm Locking Screw 52mm Lng
00-2359-054-35 3.5mm Locking Screw 54mm Lng
00-2359-056-35 3.5mm Locking Screw 56mm Lng
00-2359-058-35 3.5mm Locking Screw 58mm Lng
00-2359-060-35 3.5mm Locking Screw 60mm Lng
00-2359-065-35 3.5mm Locking Screw 65mm Lng
00-2359-070-35 3.5mm Locking Screw 70mm Lng
00-2359-010-27 2.7mm Locking Screw 10mm Lng
00-2359-012-27 2.7mm Locking Screw 12mm Lng
00-2359-014-27 2.7mm Locking Screw 14mm Lng
00-2359-016-27 2.7mm Locking Screw 16mm Lng
00-2359-018-27 2.7mm Locking Screw 18mm Lng
00-2359-020-27 2.7mm Locking Screw 20mm Lng
00-2359-022-27 2.7mm Locking Screw 22mm Lng
00-2359-024-27 2.7mm Locking Screw 24mm Lng
00-2359-026-27 2.7mm Locking Screw 26mm Lng
00-2359-028-27 2.7mm Locking Screw 28mm Lng
00-2359-030-27 2.7mm Locking Screw 30mm Lng
00-2359-032-27 2.7mm Locking Screw 32mm Lng
00-2359-034-27 2.7mm Locking Screw 34mm Lng
00-2359-036-27 2.7mm Locking Screw 36mm Lng
00-2359-038-27 2.7mm Locking Screw 38mm Lng
00-2359-040-27 2.7mm Locking Screw 40mm Lng
00-2359-042-27 2.7mm Locking Screw 42mm Lng
00-2359-044-27 2.7mm Locking Screw 44mm Lng
00-2359-046-27 2.7mm Locking Screw 46mm Lng
00-2359-048-27 2.7mm Locking Screw 48mm Lng
00-2359-050-27 2.7mm Locking Screw 50mm Lng
00-2359-052-27 2.7mm Locking Screw 52mm Lng
00-2359-054-27 2.7mm Locking Screw 54mm Lng
00-2359-056-27 2.7mm Locking Screw 56mm Lng
00-2359-058-27 2.7mm Locking Screw 58mm Lng
00-2359-060-27 2.7mm Locking Screw 60mm Lng
4
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
3
3
4
3
3
3
3
3
3
3
2
2
2
2
2
2
3
2
Qty
3
3
3
Ordering Information
(continued)
PrOxIMaL LaTeraL TIbIaL LOckIng PLaTeS
3.5mm Proximal Lateral Tibial Locking Plates
Left
00-2357-004-06
00-2357-004-08
00-2357-004-10
00-2357-004-12
00-2357-004-14
00-2357-004-16
Right
00-2357-003-06
00-2357-003-08
00-2357-003-10
00-2357-003-12
00-2357-003-14
00-2357-003-16
3.5mm/2.7mm Periarticular Locking Instrument Set
00-2360-000-02 3.5mm/2.7mm Periarticular Locking
Instrument Set (Contains the following)
Qty
00-1147-071-00 Cleaning Stylet
00-1147-076-00 Cleaning Brush
00-2358-040-00 3.5mm/2.7mm Locking Screw and Instrument
1
1
1
Case
00-2360-011-01 3.5mm/2.7mm Locking Plate Reduction
Instrument
00-2360-011-02 3.5mm/2.7mm Locking Plate Reduction
Sleeve
00-2360-012-03 Plate Reduction Spin Knob
00-2360-020-20 2.0mm Standard Cannula
00-2360-020-27 2.7mm Standard Cannula
2
4
4
2
2
4 00-2360-021-16 1.6mm Standard Cannula
00-2360-033-16 1.6mm Standard Drill-Tip Guide Wire
(5 per Box)
00-2360-040-35 3.5mm/2.7mm Locking Screw Standard
Depth Gauge
00-2360-041-35 3.5mm Cannulated Locking Screw
Depth Gauge
00-2360-053-27 2.7mm Locking Screw Tap
00-2360-053-35 3.5mm Locking Screw Tap
00-2360-054-35 3.5mm Cannulated Locking Screw Tap
00-2360-065-00 2.5mm Screwdriver Stop Ring
00-2360-065-25 2.5mm Hex Standard Screwdriver
00-2360-066-25 2.5mm Hex Standard Cannulated
Screwdriver
00-2360-071-27 2.7mm Standard Cannulated Drill
2 Bx
1
00-2360-080-00 Torque-Limiting Attachment
00-2360-086-00 Modular Handle
00-2360-088-00 3.5mm/2.7mm Cannula Inserter
00-2360-175-20 2.0mm Standard Drill
00-2360-205-27 2.7mm Standard Drill
00-4812-045-00 Large Hex Screwdriver
00-2360-050-25 2.5mm Hex Forward Captive Screwdriver 0
00-2360-051-25 2.5mm Hex Cannulated Forward Captive
Screwdriver 0
2
1
1
2
1
1
2
2
2
2
1
2
1
2
Description
3.5mm Proximal Lateral Tibial Locking Plate
3.5mm Proximal Lateral Tibial Locking Plate
3.5mm Proximal Lateral Tibial Locking Plate
3.5mm Proximal Lateral Tibial Locking Plate
3.5mm Proximal Lateral Tibial Locking Plate
3.5mm Proximal Lateral Tibial Locking Plate
Holes
6
8
10
12
14
16
Length
104mm
128mm
152mm
176mm
200mm
224mm
3.5mm Proximal Lateral Tibial Locking Plate Set
00-2357-000-09 Proximal Lateral Tibial Locking Plate Set
Qty
(Contains the following)
00-2357-004-06 3.5mm Proximal Lateral Tibial Locking Plate, 6 Hole, Left 1
00-2357-004-08 3.5mm Proximal Lateral Tibial Locking Plate, 8 Hole, Left 1
00-2357-004-10 3.5mm Proximal Lateral Tibial Locking Plate, 10 Hole, Left 1
00-2357-004-12 3.5mm Proximal Lateral Tibial Locking Plate, 12 Hole, Left 1
00-2357-004-14 3.5mm Proximal Lateral Tibial Locking Plate, 14 Hole, Left 1
00-2357-004-16 3.5mm Proximal Lateral Tibial Locking Plate, 16 Hole, Left 1
00-2357-003-06 3.5mm Proximal Lateral Tibial Locking Plate, 6 Hole, Right 1
00-2357-003-08 3.5mm Proximal Lateral Tibial Locking Plate, 8 Hole, Right 1
00-2357-003-10 3.5mm Proximal Lateral Tibial Locking Plate, 10 Hole, Right 1
00-2357-003-12 3.5mm Proximal Lateral Tibial Locking Plate, 12 Hole, Right 1
00-2357-003-14 3.5mm Proximal Lateral Tibial Locking Plate, 14 Hole, Right 1
00-2357-003-16 3.5mm Proximal Lateral Tibial Locking Plate, 16 Hole, Right 1
Qty 3.5mm Proximal Tibial Standard Jig Set
00-2360-000-15 3.5mm Proximal Tibial Standard Jig Set
(Contains the following)
00-2360-093-01 3.5mm Proximal Lateral Tibial Plate Jig, Right
00-2360-093-02 3.5mm Proximal Lateral Tibial Plate Jig, Left
00-2358-050-00 3.5mm Proximal Lateral Tibial Plate and Jig Case
Screw and Instrument Sets
00-2360-000-02 3.5mm/2.7mm Periarticular Locking Instrument Set
00-2359-000-02 3.5mm/2.7mm Locking Screw Set
1
1
1
Compatible with:
Zimmer Periarticular 3.5mm Self-Tapping Cortical Screws; Zimmer
Periarticular 4.0mm Cancellous Screws; Zimmer Small-Fragment
Instrument Set; Zimmer Small-Fragment Screw Set
3.5mm/2.7mm Locking Screw Set
Item Number Description
00-2359-030-36 3.5mm Cannulated Locking Screw 30mm Lng
00-2359-035-36 3.5mm Cannulated Locking Screw 35mm Lng
00-2359-040-36 3.5mm Cannulated Locking Screw 40mm Lng
00-2359-045-36 3.5mm Cannulated Locking Screw 45mm Lng
00-2359-050-36 3.5mm Cannulated Locking Screw 50mm Lng
00-2359-055-36 3.5mm Cannulated Locking Screw 55mm Lng
00-2359-060-36 3.5mm Cannulated Locking Screw 60mm Lng
00-2359-065-36 3.5mm Cannulated Locking Screw 65mm Lng
00-2359-070-36 3.5mm Cannulated Locking Screw 70mm Lng
00-2359-075-36 3.5mm Cannulated Locking Screw 75mm Lng
00-2359-080-36 3.5mm Cannulated Locking Screw 80mm Lng
00-2359-085-36 3.5mm Cannulated Locking Screw 85mm Lng
00-2359-090-36 3.5mm Cannulated Locking Screw 90mm Lng
00-2359-030-37 3.5mm Cannulated Conical Screw 30mm Lng
00-2359-035-37 3.5mm Cannulated Conical Screw 35mm Lng
00-2359-040-37 3.5mm Cannulated Conical Screw 40mm Lng
00-2359-045-37 3.5mm Cannulated Conical Screw 45mm Lng
00-2359-050-37 3.5mm Cannulated Conical Screw 50mm Lng
00-2359-055-37 3.5mm Cannulated Conical Screw 55mm Lng
00-2359-060-37 3.5mm Cannulated Conical Screw 60mm Lng
00-2359-065-37 3.5mm Cannulated Conical Screw 65mm Lng
00-2359-070-37 3.5mm Cannulated Conical Screw 70mm Lng
00-2359-012-35 3.5mm Locking Screw 12mm Lng
00-2359-014-35 3.5mm Locking Screw 14mm Lng
00-2359-016-35 3.5mm Locking Screw 16mm Lng
00-2359-018-35 3.5mm Locking Screw 18mm Lng
00-2359-020-35 3.5mm Locking Screw 20mm Lng
00-2359-022-35 3.5mm Locking Screw 22mm Lng
00-2359-024-35 3.5mm Locking Screw 24mm Lng
00-2359-026-35 3.5mm Locking Screw 26mm Lng
00-2359-028-35 3.5mm Locking Screw 28mm Lng
00-2359-030-35 3.5mm Locking Screw 30mm Lng
00-2359-032-35 3.5mm Locking Screw 32mm Lng
00-2359-034-35 3.5mm Locking Screw 34mm Lng
00-2359-036-35 3.5mm Locking Screw 36mm Lng
00-2359-038-35 3.5mm Locking Screw 38mm Lng
00-2359-040-35 3.5mm Locking Screw 40mm Lng
00-2359-042-35 3.5mm Locking Screw 42mm Lng
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
2
3
2
2
3
3
3
3
4
4
4
4
3
4
Qty
3
3
3
Item Number Description
00-2359-044-35 3.5mm Locking Screw 44mm Lng
00-2359-046-35 3.5mm Locking Screw 46mm Lng
00-2359-048-35 3.5mm Locking Screw 48mm Lng
00-2359-050-35 3.5mm Locking Screw 50mm Lng
00-2359-052-35 3.5mm Locking Screw 52mm Lng
00-2359-054-35 3.5mm Locking Screw 54mm Lng
00-2359-056-35 3.5mm Locking Screw 56mm Lng
00-2359-058-35 3.5mm Locking Screw 58mm Lng
00-2359-060-35 3.5mm Locking Screw 60mm Lng
00-2359-065-35 3.5mm Locking Screw 65mm Lng
00-2359-070-35 3.5mm Locking Screw 70mm Lng
00-2359-010-27 2.7mm Locking Screw 10mm Lng
00-2359-012-27 2.7mm Locking Screw 12mm Lng
00-2359-014-27 2.7mm Locking Screw 14mm Lng
00-2359-016-27 2.7mm Locking Screw 16mm Lng
00-2359-018-27 2.7mm Locking Screw 18mm Lng
00-2359-020-27 2.7mm Locking Screw 20mm Lng
00-2359-022-27 2.7mm Locking Screw 22mm Lng
00-2359-024-27 2.7mm Locking Screw 24mm Lng
00-2359-026-27 2.7mm Locking Screw 26mm Lng
00-2359-028-27 2.7mm Locking Screw 28mm Lng
00-2359-030-27 2.7mm Locking Screw 30mm Lng
00-2359-032-27 2.7mm Locking Screw 32mm Lng
00-2359-034-27 2.7mm Locking Screw 34mm Lng
00-2359-036-27 2.7mm Locking Screw 36mm Lng
00-2359-038-27 2.7mm Locking Screw 38mm Lng
00-2359-040-27 2.7mm Locking Screw 40mm Lng
00-2359-042-27 2.7mm Locking Screw 42mm Lng
00-2359-044-27 2.7mm Locking Screw 44mm Lng
00-2359-046-27 2.7mm Locking Screw 46mm Lng
00-2359-048-27 2.7mm Locking Screw 48mm Lng
00-2359-050-27 2.7mm Locking Screw 50mm Lng
00-2359-052-27 2.7mm Locking Screw 52mm Lng
00-2359-054-27 2.7mm Locking Screw 54mm Lng
00-2359-056-27 2.7mm Locking Screw 56mm Lng
00-2359-058-27 2.7mm Locking Screw 58mm Lng
00-2359-060-27 2.7mm Locking Screw 60mm Lng
4
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
3
3
4
3
3
3
3
3
3
3
2
2
2
2
2
2
3
2
Qty
3
3
3
Contact your Zimmer representative or visit us at www.zimmer.com
+H124972347601001/$061113K067
97-2347-601-00 5ML Printed in U.S.A. ©2006 Zimmer, Inc.
Locking in the perfect fit
Zimmer ®
Periarticular
Locking Plate
System
Periarticular Locking Plate System
Combining anatomic fit with locking technology
With the Periarticular Locking Plate System, Zimmer offers advanced solutions for the management of comminuted fractures and fractures in which deficient bone stock or poor bone quality is encountered. The system combines anatomically contoured periarticular plates with locking screw technology. The unique plate designs feature a transitioned profile that is thinner in the metaphyseal and thicker in the diaphyseal areas. Locking screw holes are combined with compression slots, so that the plates can be used both as locking devices and for fracture compression.
Precontoured plates that follow the shape of the bone
One of the most difficult challenges in the treatment of periarticular fractures is bending the plate to fit the specific profile of the bone. Zimmer’s advanced periarticular plates were developed using digital laser bone-scanning technology. The data was used to guide advanced fabricating technologies in the precise manufacture of precontoured implants. The Periarticular
Locking Plates closely follow the shape of the bone to create a fit that requires little or no additional bending.
Advanced fabricating technologies are guided by data from a digital laser scanner that helps to determine optimal implant contours.

Public link updated
The public link to your chat has been updated.
Advertisement