User Manual - Hopkins Medical Products

User Manual - Hopkins Medical Products
User Manual
Blood Pressure Monitor
User Manual
Manual
User
RELATED ITEMS
TMB-1018
Blood Pressure Monitor
Arm Type
TMB-1018
Hopkins® IMPACT Digital Arm BP
• Replacement Adult Size Cuff #526019
• Large Adult Size Cuff #526020
• Hopkins ® Flex Temp Thermometer #579420
Arm Type
Item #526018
• Hopkins ® Wave t m Pulse Oximeter #594029
Hopkins® IMPACT Digital Arm BP
Thank you very much for selecting TRANSTEK Blood Pressure Monitor
TMB-1018.
To use the monitor correctly and safely, please read the manual
thoroughly.
Please well keep this manual in order to reference in future.
ZHONGSHAN TRANSTEKELECTRONICES CO.,LTD
Jinbiao, Minzhong, Zhongshan,528441,Guangdong, China
5 Greenwood Place • Baltimore, MD 21208
1-800-835-1995 • FAX: 410-484-4036
w w w. h m p o n l i n e . c o m
Thank you for selecting the Hopkins® IMPACT Digital Arm BP #526018.
Thank
you
very
for selecting
Blood Pressure
To use
this
BPmuch
monitor
correctly TRANSTEK
and safely, please
read thisMonitor
entire
TMB-1018.
manual thoroughly and keep it for your reference.
To use the monitor correctly and safely, please read the manual
thoroughly.
Please well keep this manual in order to reference in future.
INDEX
INTRODUCTION
♥ Features
INTRODUCTION ................................................................................................. 1
•Measures Systolic Blood Pressure
•Safety information
•LCD display
•Monitor components
•Measures Diastolic Blood Pressure
•Measures Pulse Rate
BEFORE YOU START ..................................................................................... 4
•Installing and replacing batteries
•Setting date and time
•Retains historic records of up to 60
previous measurements
•Large 5.5” x 1.5” bright LCD display
♥ Safety Information
The following symbols may be used in the user manual, product labeling,
or on other components. They are the requirement of standard and use.
MEASUREMENT ................................................................................................. 7
•Positioning the cuff
•Taking a measurement
Caution: consult accompanying
documents
Type B applied part
•Recalling records
•Deleting records
CE Mark: conforms to essential
requirements of the Medical
Device Directive 93/42/EEC
DISPOSAL: Do not dispose this
product as unsorted municipal waste.
Collection of such waste separately
for special treatment is necessary.
INFORMATION FOR THE USER ..................................................................... 11
Manufacturer
Direct current
•Tips for operation
•Maintenance
Specifies serial number
Authorized Representative in the
European Community
RECALLING RECORDED MEASUREMENTS
.............................................. 9
ABOUT BLOOD PRESSURE ........................................................................... 13
•What are systolic and diastolic pressure?
•What is normal blood pressure?
•Why does my blood pressure fluctuate throughout the day?
•Why is the reading I get from a healthcare provider different from the ones I take at home?
•Which arm should I use to take my blood pressure?
! CAUTION

This device is for adult use only.
This device is intended for non-invasive measuring and monitoring of arterial blood pressure. It is not
intended for use on extremities other than the arm or for functions other than obtaining a blood pressure
measurement and pulse rate.
TROUBLESHOOTING ...................................................................................... 15
SPECIFICATIONS ............................................................................................. 16
WARRANTY INFORMATION ......................................................................... 21
Thank you for selecting the Hopkins® Digital IMPACT Arm BP (Item #526018). This monitor features blood pressure measurement, pulse rate measurement, and an auto-save function.
Do not confuse self-monitoring with self-diagnosis. This unit allows you to monitor your blood pressure. Do
not begin or end medical treatment based solely on self-monitoring, consult a physician for treatment advice.
If you are taking medication, consult your physician to determine the most appropriate time to measure your
blood pressure. Never change a prescribed medication without consulting your physician.
This unit is not suitable for continuous monitoring during medical emergencies or operations.
If the cuff pressure exceeds (300 mmHg), the unit will automatically deflate. Should the cuff not deflate when
pressures exceeds (300 mmHg), detach the cuff from the arm and press the START/STOP button to stop
inflation.
To avoid measurement errors, carefully read this manual before using this device.
Readings taken by the #526018 are equivalent to those obtained by a trained observer using the
cuff and stethoscope auscultation method.
This device is not AP/APG equipment and not suitable for use in the presence of a flammable anesthetic
mixture with air, or with oxygen, or nitrous oxide.
This manual contains important safety and care information, and provides step by step instructions
for using this product. Read this manual thoroughly before using this product
Please avoid strong electromagnetic fields as they may interfere with or damage this device.
Always check this device to make sure that it is in proper working condition before use.
1
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
SYMBOL
DESCRIPTION
INTRODUCTION EXPLANATION
INTRODUCTION
LCD
display
signal
INTRODUCTION
Systolic blood pressure
High pressure result
SYMBOL
DESCRIPTION
EXPLANATION
INTRODUCTION
INTRODUCTION
LCD
display
signal
LCD display signal
♥ LCD Display
Diastolic
pressure
pressure
Systolic
blood blood
pressure
High Low
pressure
resultresult
LCDLCD
display
signal
display
signal
LCD
display
signal
LCD
display
signal
LCD
display
signal
LCD display
signal
Pulse
Pulse/minute
Diastolic
blood pressure Low pressure
result
LCD display
display
signal
LCD
signal
Deflating
CUFF
air
Pulse
Pulse/minute is exhausting of deflating
Time (hour:minute)
Deflating
TimeMemory
(hour:minute)
INTRODUCTION
INTRODUCTION
LCD display signal
Memory
INTRODUCTION
Monitor
componen
Monitor
components
♥ Monitor
Components
INTRODU
INTRODUCTION
INTRODUCTION
INTRODUCTION
AIR HOSE
DC POWER
SOCKET
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
INTRODUCTION
DC
POWER
SOCKET
CUFF
Monitor
components
Monitor
components
Monitor
components
Monitor
components
SET/UP BUTTON
Monitor components
AIR HOSE
Monitor
components
START/OFF BUTTON
Monitor components
CUFF
CUFF
SET/UP BUTTON
CUFF CUFF
CUFF
Monitor
components
MEM/DOWN
BUTTON
CUFF
CUFF
Monitor components
AIR HOSE
START/OFF BUTTON
AIR
AIR HOSE
HOSE
LCD
DISPLAY
AIR
HOSE
AIR
HOSE
CUFF
AIR HOSEMEM/DOWN BUTTON
AIR HOSE
CUFF
AIR HOSE
LCD DISPLAY CUFF BATTERY COMPARTMENT
AIR HOSE
Currently
If “M”time
shows, the displayed measurement
AIR HOSE
INTRODUCTION
Component
list of
SYMBOL
DESCRIPTION
EXPLANATION
BATTERY COMPARTMENT
values is from the memory.
pressure
measuring system
If “M”For
shows,
the displayedtomeasurement
AIR CONNECTOR
PLUG result
instructions,refer
Page 9
Systolic blood pressure
High pressure
time
CUFFCurrently
air is exhausting
of deflating
Component
1 Cuff list of
CUFF TUBING
EXPLANATION
values is from the memory.
pressure
measuring
system
DCMicro
POWER
SOCKET
DESCRIPTION
EXPLANATION
AIR
CONNECTOR
2
Control
Unit
AIR
CONNECTOR
PLUG
mmHg
Measurement Unit
of the 9blood pressure
Diastolic blood pressure Low pressure result
For instructions,refer
to Page
1 Cuff3 Amplifier
Monitor
components
PLUG
Systolic blood
BP pressure
HighHigh
pressure
resultresult
(1mmHg=0.133kPa)
pressure
SYS Systolic
2 Micro
Control
Pulse/minute
4 Air
pipe Unit
mmHg
Measurement Unit
of the blood pressure Pulse
DC POWER SOCKET
SYMBOL
DESCRIPTION
EXPLANATION
DC
SOCKET
SYMBOL
DESCRIPTION
EXPLANATION
DC POWER
POWER
SOCKET
SYMBOL
DESCRIPTION
EXPLANATION
DC
POWER
SOCKET
SYMBOL
DESCRIPTION
EXPLANATION
DC
POWER
SOCKET
SYMBOL
DESCRIPTION
EXPLANATION
3 Amplifier
CUFF
kPa
Measurement
Unit
of
the
blood
pressure
5
Pump
(1mmHg=0.133kPa)
DC
SYMBOL
DESCRIPTION
EXPLANATION
Diastolic
blood
pressure
Low
pressure
result
DC
POWER
SOCKET
SYMBOL
DESCRIPTION
EXPLANATION
Diastolic
BP
Low
pressure
result
Deflating
CUFF
air
is
exhausting
of
deflating
DIA
BP
CATEGORY
Systolic
blood
pressure
High
pressure
result
SET/UP
BUTTON
4
Air
pipe
Systolic
blood
pressure
High
pressure
result
(1kPa=7.5mmHg)
Systolic
blood
pressure
High
pressure
result
6
Valve
DC
POWER
SOCKET
SYMBOL
DESCRIPTION
EXPLANATION
Systolic
High
pressure
result
AIR
HOSE
Systolicblood
bloodpressure
pressure
High
pressure
result
LCD
DISPLAY
INDICATOR
Systolic blood
High pressure result
kPa
Measurement
Unit
the blood pressure
5 PumpDCBUTTON
Systolic
blood pressure Pulse/minute
High
pressure
resultofpressure
START/OFF
POWER SOCKET
SYMBOL Pulse
DESCRIPTION
EXPLANATION
Time (hour:minute)
Currently time
Diastolic
blood
pressure
Low
pressure
Pulse per
Minute
(Beats
per
Minute)
Systolic
blood
pressure
High
pressure
result
DC POWER SOCKET
SYMBOL
DESCRIPTION
EXPLANATION
Diastolic
blood
pressure
Low
pressure
result
Pul/
min Pulse
(1kPa=7.5mmHg)
Diastolic
blood
pressure
Low
pressure
result
Low
battery
Batteries
are
low
and
needresult
to be replaced
6
Valve
Diastolic
blood
pressure
Low
pressure
result
Diastolic
blood
pressure
Low
pressure
result
MEM/DOWN
BUTTON
SET/UP BUTTON
List
SET/UP
BUTTON
Diastolic
blood pressure
Deflating
CUFF
is exhausting
of deflatingLow pressure result
Systolic blood
Highair
pressure
result
SET/UP SET/UP
BUTTON
Diastolic
bloodpressure
pressure
Low
pressure
result
BUTTON
SET/UP
BUTTON
SET/UP BU
Memory
If “M”LCD
shows,
the displayed measurement
Pulse
Pulse/minute
Systolic
blood
pressure
High
pressure result
result
DISPLAY
Pulse
Pulse/minute
START/OFF BUTTON
SET/UP
BUTTON
Diastolic
blood
pressure
Low
pressure
START/OFF
BUTTON
Pulse
Pulse/minute
Pulse
Pulse/minute
Shocking
willand
result
in
inaccurate
Pulse remainding
Pulse/minute
2.Cuff (Type B applied
part)
(AC2232-01)
1.Blood Pressure
Monitor
LowBattery
battery
Batteries
are
need
to bePulse/minute
replaced
START/OFF
BUTTONBUTTON
Low
Batteries
areShocking
low
andlow
need
to be
replaced
START/OFF
BUTTON
Pulse
List
SET/UP START/OFF
BUTTON
values is from
the memory.
Time
(hour:minute)
time
START/OFF
Diastolic
blood pressure Currently
Low pressure
result
Pulse
Pulse/minute
MEM/DOWN
BUTTON
START/OFF BUTTON
MEM/DOWN
BUTTON
Deflating Low
CUFF of
air
is exhausting of deflating
MEM/DOWN
BUTTON
(TMB-1018-A)
Diastolic
blood pressure
pressure
result
AIR
CONNECTOR
PLUG
SET/UP MEM/DOWN
BUTTON
Deflating
CUFF
air
is
exhausting
BUTTON
Pulse
Pulse/minute
MEM/DOWN
BUTTON
BATTERY
COMPARTMENT
For instructions,refer
toLCD
Page
9
Deflating
CUFF
air
is
of deflating
deflating
START/OFF
BUTTON
Deflating
CUFF
air
ofof
deflating
Deflating
CUFF
airisof
isexhausting
deflating
MEM/DOWN
Shocking
remainding
Shocking
willexhausting
result
inexhausting
inaccurate
2.Cuff
(Type
B
applied
part)
(AC2232-01)
1.Blood
Pressure
Monitor
DISPLAY
Average
The
average
blood
pressure
SET/UP
BUTTON
Deflating
CUFF
air
is
exhausting
of
deflating
MEM/DOWN
BUTTON
LCD
DISPLAY
Pulse
Pulse/minute
LCD DISPLAY
Deflating
CUFF
air
exhausting
ofmeasurement
deflating
If “M”
shows,
the
displayed
LCD
DISPLAY
START/OFFlist
BUTTON
LCD
DISPLAY
Millimeters
MercuryTime
Measurement
unitisof
blood
pressure
mmHg Memory
MEM/DOWN
BUTTON
LCD
DISPLAY
Component
of
(hour:minute)
Currently
time
Pulse
Pulse/minute
Time
(hour:minute)
Currently
time
Deflating
CUFF
air
is
exhausting
of deflating
(TMB-1018-A)
LCD DISPLAY
START/OFF BUTTON
Time (hour:minute)
Currently
time
mmHg
Measurement
Unit of the blood pressure
Time
Currently
time
values
isTime
from
the
memory.
Time(hour:minute)
(hour:minute)
Currently
time
MEM/DOWN
BUTTONsystem
Recalling
The
willpressure
be
Currently time
Average
The
average
of blood
BATTERY
COMPARTMENT
LCD DISPLAY BATTERY
pressure
measuring
Deflating
CUFF
air erecords
is (hour:minute)
exhausting
of showed
deflating
COMPARTMENT
Time
(hour:minute)
Currently
time
BATTERY
COMPARTMENT
AIR CONNECTOR (1mmHg=0.133kPa)
PLUG
BATTERY
COMPARTMENT
MEM/DOWN
BUTTON
BATTERY
COMPARTMENT
For
instructions,refer
to
Page
9 thevalue
If
“M”
shows,
the
displayed
measurement
Deflating
CUFF
air
is
exhausting
of
deflating
BATTERY
COMPARTMENT
LCD
DISPLAY
Memory
If
“M”
shows,
displayed
measurement
Time
(hour:minute)
Currently
time
Memory
If
“M”
shows,
the
displayed
measurement
1
Cuff
BATTERY
COMPARTMENT
Memory
If
“M”
shows,
the
displayed
measurement
list of
Memory
If If“M”
shows,
the
displayed
measurement
Memory
“M”
shows,
the
displayed
measurement
Component
list
of
Irregular
heartbeat
Arrhythmia
Recalling
The
erecords
will
be
showed
is fromvalues
the
memory
of
recorded
measurements
Component
list
ofComponent
Memory
If “M”
shows, the displayed measurement LCD DISPLAY BATTERY COMPARTMENT2 Micro
Time
(hour:minute)
Currently
time
Component
listlistofof
Component
DC
POWER
SOCKET
SYMBOL Memory
DESCRIPTION
EXPLANATION
values
is
from
the
memory.
Memory
If
“M”
shows,
the
displayed
measurement
is
from
the
memory.
Control
Unit
Compone
kPa
Measurement
Unit
of
the
blood
pressure
values
isvalues
from
the
memory.
pressure
measuring
syste
mmHg
Measurement
Unit
of
the
blood
pressure
values
is
from
the
memory.
Time
(hour:minute)
Currently
time
is
from
the
memory.
Component
list
of
pressure
measuring
system
(See
page
9
for
instructions)
BATTERY COMPARTMENT pressure
AIR CONNECTOR PLUG
measuring
systemsystem
Memory
If
“M”
shows,
the
displayed
measurement
valuestoisPage
from 9the memory.
pressure
measuring
AIR
PLUG
pressure
measuring
system
For
instructions,refer
values
isFor
from
the
memory.
For
instructions,refer
to
Page
9
AIR CONNECTOR
CONNECTOR
PLUG PLUG
3 Amplifier
Component
list
of
pressure m
AIR
CONNECTOR
(1kPa=7.5mmHg)
AIR
CONNECTOR
PLUG
For
instructions,refer
to
Page
9
Grade
The
grade
of
the
blood
pressure.
BATTERY
COMPARTMENT
Systolic
blood
pressure
High
pressure
result
1
Cuff
(1mmHg=0.133kPa)
Irregular
heartbeat
For
instructions,refer
to
Page
9
Arrhythmia
instructions,refer
to
Page
9
pressure
measuring
system
1
Cuff
AIR CONNECTOR
PLUG
Memory
If “M” shows,
the
displayed
measurement
1
Cuff
values
is
from
the
memory.
For
instructions,refer
to
Page
9
3.
4*AAA
alkaline
batteries
4.User
manual
AIR
CONNECTOR
PLUG
1
Cuff
1
Cuff
Component
list of2 Micro
Page
9
4 Air
pipe measuring
pressure
system
Cuff
Memory
IfFor
“M”
shows,
the
displayed
The unit
is instructions,refer
inflating
with
air
to to
obtain
the
For
tomeasurement
Page
13
Control 1Unit
1
Cuff
2
Micro
Unit
AIR CONNECTOR PLUG
values
is instructions,refer
from
the
memory.
mmHg
Measurement
Unit
of the blood
pressure
list Control
of
Inflating
2
Micro2Control
Control
Unit
For
instructions,refer
to
Page
9the
mmHg
Measurement
Unit
of
the
blood
pressure
Unit
2Micro
Micro
Control
Unit
mmHg
Measurement
Unit
of
the
blood
pressure
pressure
measuring
system
kPa
Measurement
of
the
blood
pressure
Low battery
Batteries
are low and need to be replaced 5 Component
Diastolic
blood pressure
Low
pressure
result
Grade
The
grade
ofUnit
the
blood
pressure.
Pump
mmHg
Measurement
Unit
ofofthe
blood
mmHg
Unit
bloodpressure
pressure
required
level
ofMeasurement
pressure
1
Cuff
2 Micro C
values
is
from
the
memory.
List
3
Amplifier
AIR
CONNECTOR
PLUG
mmHg
Measurement
Unit
of
the
blood
pressure
2
Micro
Control
Unit
3
Amplifier
3.
4*AAA
alkaline
batteries
4.User
manual
For
instructions,refer
to
Page
9
(1mmHg=0.133kPa)
pressure
measuring
system
3
Amplifier
mmHg
Measurement
Unit
of to
thePage
blood pressure
(1mmHg=0.133kPa)
3Amplifier
Amplifier
(1mmHg=0.133kPa)
AIR CONNECTOR PLUG
1SET/UP
Cuff 3BUTTON
(1kPa=7.5mmHg)
For instructions,refer
instructions,refer
6 Valve
(1mmHg=0.133kPa)
(1mmHg=0.133kPa)
2
Micro
Control
Unit
3 Amplifie
For
to
Page 913pressure
4Pressure
Air pipe Monitor
mmHg
Measurement
Unit
the
3
Amplifier
Air
pipe
Pulse
Pulse/minute
14
Cuff
Shocking remainding
Shocking will result in inaccurate
4
Air
pipe
1.Blood
(1mmHg=0.133kPa)
START/OFF
BUTTON
The unit
is deflating and
theofair
is blood
being (1mmHg=0.133kPa)
4
Air
pipe
4
Air
pipe
2
Micro
Control
Unit
3
Amplifier
4 Air pipe
kPa
Measurement
Unit
of the blood pressure
Deflating
mmHg
5
Pump
kPa
Measurement
Unit
of
the
blood
pressure
(1mmHg=0.133kPa)
4
Air
pipe
5
Pump
kPa
Measurement
Unit
of
the
blood
pressure
2
Micro
Control
Unit
exhausted
from
thelow
cuff
5
Pump
kPa
Measurement
Unit
ofof
the
blood
kPa
Measurement
Unit
the
bloodpressure
pressure
Low
battery
Batteries
are
andofneed
to
be
replaced
5 5Pump
(TMB-1018-A)
BUTTON
Pump
mmHg
Measurement
Unit
the
pressure
3MEM/DOWN
Amplifier
Measurement
Unit
of
the
blood
pressure
List
Deflating
CUFFkPa
air
is exhausting
ofblood
deflating
4
Air
pipe
5 Pump
(1kPa=7.5mmHg)
(1mmHg=0.133kPa)
6
Valve
kPa
Measurement
Unit
of
the
blood
pressure
(1kPa=7.5mmHg)
5
Pump
Average
The average
of blood pressure
Valve
(1kPa=7.5mmHg)
36
6
Valve
(1kPa=7.5mmHg)
(1kPa=7.5mmHg)
6 6Valve
Valve
LCD DISPLAY
(1mmHg=0.133kPa)
4 Amplifier
Air pipe
kPa
Measurement
Unitinofinaccurate
the blood pressure
(1kPa=7.5mmHg)
5
Pump
63Valve
2
(1kPa=7.5mmHg)
Shocking
remainding
Shocking
will
result
6
Valve
2.Cuff
(Type
B
applied
part)
(AC2232-01)
1.Blood
Pressure
Monitor
4
Air
pipe
Time
(hour:minute)
The
current
time
(set
by
user)
Time (hour:minute)
Currently are
timelow
kPa
Measurement
Unit
of the
blood
pressure
5 Valve
Pump
Low battery
Batteries
are
low
and needRecalling
to be replaced
(1kPa=7.5mmHg)
6
Low
Batteries
and
need
to
be
replaced
The
erecords
will
be
showed
List
Low battery
battery
Batteries
are
low
and
need
to
be
replaced
List
Low
battery
Batteries
are
low
and
need
to
be
replaced
kPa
Measurement
Unit
of
the
blood
pressure
Low battery
Batteries
are low and need
to be replaced
(TMB-1018-A)
BATTERY COMPARTMENT 56 Pump
Low
battery
to beList
replaced
(1kPa=7.5mmHg)
List
3
Valve
Low
battery
Batteries
are
low
and
need to
beBatteries
replaced are low and need
List
Average
The
average
ofmay
blood
pressure
List
(1kPa=7.5mmHg)
Memory
Ifremainding
“M”
shows,
the
displayed
measurement
6Component
Valve
Inaccurate
readings
occur
if unit
isbe
hit,replaced
Shocking
Shocking
will
result
in inaccurate
2.Cuff
(Type
B
applied
part) (AC2232-01)
1.Blood
Pressure
Monitor
Shocking
remainding
Shocking
will
result
in
inaccurate
Low
battery
Batteries
are
low
and
need
to
Irregular
heartbeat
Arrhythmia
2.Cuff
(Type
B
applied
part)
(AC2232-01)
1.Blood
Pressure
Monitor
list
of
Shocking
remainding
Shocking
will
result
in
inaccurate
Shock
Warning
2.Cuff
(Type
B
applied
part)
(AC2232-01)
1.Blood
Pressure
Monitor
List
Shocking
remainding
Shocking
will
result
in
inaccurate
Shocking remainding
will
result
in inaccurate will result in inaccurate
2.Cuff
BBapplied
part)
1.Blood
2.Cuff(Type
(Type
applied
part)(AC2232-01)
(AC2232-01)
1.BloodPressure
PressureMonitor
Monitor
Shocking
remainding
values
isShocking
from
the
memory.
shaken,
or otherwise
shocked
2.Cuff
(Type
Bsystem
applied part) (AC2
Monitor
Low battery
Batteries
are
low
and
to beShocking
replaced
Shocking
remaindingdropped,
Shocking
will
result
in need
inaccurate
(TMB-1018-A)
2.Cuff Pressure
(Type B applied
part)
(AC2232-01)
1.Blood
Pressure
Monitor 1.Blood
Recalling
The
erecords
will
beand
showed
pressure
measuring
List
(TMB-1018-A)
(TMB-1018-A)
Low
battery
Batteries
are
low
need
to be
replaced
AIR
CONNECTOR
PLUG
(TMB-1018-A)
(TMB-1018-A)
Average
The
average
of
blood
pressure
Shocking
remainding
Shocking
will
result
in
inaccurate
Grade
The
grade
of
the
blood
pressure.
For
instructions,refer
to
Page
9
2.Cuff
(Type
B
applied
part)
(AC2232-01)
1.Blood
Pressure
Monitor
List
Average
The
average
of
blood
pressure
(TMB-1018-A)
Average
The average
of bloodofof
pressure
1 Cuff 3. 4*AAA alkaline batteries
Average
The
blood
(TMB-1018-A)
Average
Theaverage
average
bloodpressure
pressure
Shocking
remaindingThe average
Shocking
result
in pressure
inaccurate
Average
The average of blood pressure
2.Cuff
(Type
1.Blood
Pressure
Monitor
For instructions,refer
to Page
13 B applied part) (AC2232-01)
Average
of
thewill
blood
pressure
measurements
Average
The
average
of
blood
Irregular
heartbeat
Arrhythmia
(TMB-1018-A)
Shocking
remainding
Shocking
will
result
inshowed
inaccurate
2 Micro
Control Unit
2.Cuff (Type B applied part)
(AC2232-01)
1.Blood
Pressure Monitor
Recalling
The
erecords
will
be
showed
mmHg
Measurement
Unit
of
the
blood
pressure
Average
average
of
blood
pressure
Recalling
The
erecords
will
be
(TMB-1018-A)
Recalling
The erecords
will be showed
Recalling
The
will
Theerecords
erecords
willbebeshowed
showed
3 Amplifier
Recalling
The erecords will be showed
Average Recalling
The
average
of
blood
pressure
(TMB-1018-A)
(1mmHg=0.133kPa)
Grade
The
grade
of the
blood
pressure.
Recalling
The
erecords
will
be showed
Average
The
average
ofwill
blood
pressure
3. 4*AAA alkaline batteries
4.User manual
Irregular
heartbeat
Arrhythmia
4 Air pipe
Recalling
The stored
records
are
being
retrieved
Recalling
The
erecords
betoshowed
Irregular
heartbeat
Arrhythmia
Irregular
heartbeat
For
instructions,refer
Page
13
Arrhythmia
Irregular
heartbeat
Arrhythmia
Irregular
heartbeat
Arrhythmia
Irregular heartbeat
Arrhythmia
Recalling
The
erecords
will
kPa
Measurement
Unitbeofshowed
the blood pressure
5 Pump
Irregular
heartbeat
Arrhythmia
Recalling
erecords
will blood
be showed
Grade The
grade
of the blood pressure.
Grade
The
grade
of
the
pressure.
Irregular
heartbeat
Arrhythmia
(1kPa=7.5mmHg)
Grade Grade
The
grade
of
the The
blood
pressure.
6 Valve
The
grade
of
the
blood
pressure.
3.
4*AAA
alkaline
batteries
4.User
manual
Grade
The
grade
of
the
blood
pressure.
3.
4*AAA
alkaline
batteries
4.User
manual
Grade
The grade
of the
pressure.
4*AAA
alkaline
batteries
4.User
manual
2detected
Irregular
Heartbeat
Irregular
heartbeat
(arrhythmia)
instructions,refer
to Page
13 blood3.
Irregular
heartbeat
3.3.
4*AAA
alkaline
manual
Arrhythmia
4*AAA
alkaline
batteries
4.User
manual
® batteries
Grade
The
grade
of
the For
blood
For
instructions,refer
to
Page
#526018
Hopkins
IMPACT
Adult
Digital Cuff
AAA Batteries
3. 4.User
4*AAA4.User
alkaline
batteries
4.UserFour
manual
For
instructions,refer
to pressure.
Pageto13
13
For
instructions,refer
1313
For
instructions,refer
toPage
Page
Irregular
heartbeat
3.Page
4*AAA
alkaline
batteries
manual
Arrhythmia
Grade
The
grade
of
the
blood
pressure.
For
instructions,refer
to
13
Low battery
Batteries
are low andto
need
to 13
be replaced
For
instructions,refer
Page
Digital BP
Monitor
3. List
4*AAA alkaline
batteries
4.User manual
Cuff Circumference: 8.5” - 12.5”
Grade
The
grade
of
the
blood
pressure.
For instructions,refer
to Page 13
BP
Category
Blood The
pressure
level
reading
3. 4*AAA alkaline batteries
4.User manual(22cm - 32cm)
Grade
grade
of the
blood pressure.
For
instructions,refer
Page 13
3
Shocking remainding(See page
Shocking
will result intoinaccurate
3.
4*AAAPressure
alkaline batteries
4.User
manual
2.Cuff (Type
B applied part) (AC2232-01)
1.Blood
Monitor
Indicator
13 for instructions)
For instructions,refer
to Page 13
SYMBOL
DESCRIPTION
SYMBOL
LCD display signal
2
22
2
22
2
Average
Recalling
2
The average of blood pressure
The erecords will be showed
(TMB-1018-A)
AAA
AAA
AAA
♥ Parts Included
AAA
2
3
3
3
33
the right battery and special power adapter.
MEM
START STOP
BEFORE YOU START
The installment and replacement of battery
BEFORE YOUYOU
STARTSTART
BEFORE
♥
1.Slide
off the battery
cover.
The Choice
of Battery
2.Install
the
batteries
by
1.Battery
powered
mode:
The
Choice
ofmatching
Battery
4*AAA alkaline
batteriesas shown.
the6VDC
correct
polarity,
2.AC adaptor powered mode:
1.Battery
mode:
3.Replace
the powered
cover.
100-240V~, 50-60HZ,400mA
Installing
the
Batteries
BEFORE YOU START
BEFORE YOU START
2.Press the “MEM” to
change the [YEAR].
Setting Date, time and
measurement
unitDate
♥ Setting
the
and Time
Setting Date, time and measurement unit
It is important to set the clock before using your blood pressure
monitor, so that a time stamp can be
assigned
to eachto
record
It is
important
set that
the clock before using your blood pressure monitor
is stored in the memory. (year :2000—2050,time:24
H)
It is important
to set the clock before using your blood pressure
so that a time stamp can be assigned to each record stored in the memory.
4*AAA
alkaline
batteries
(Can6VDC
be supplied
by AC adaptor
model
2.AC adaptor powered mode:
UE08WCP-060100SPA only!)
Please
unplug the adaptor
to depart from
100-240V~,
50-60HZ,400mA
AC adaptor
1.When the unit is off,
hold pressing “SET”
for 3 seconds to enter
the mode for year
setting.
1. Slide off
the utility
battery
the using
power. cover on the back of the unit.
(Can
be supplied
by AC adaptor
model the below happen
Replace
the batteries
whenever
CAUTION
UE08WCP-060100SPA only!)
2. InstallInthe
byeffect
matching
the
polarity,
as shown above.
orderbatteries
to
get the best
and protect
you correct
monitor,please
use
The
shows
the rightPlease
battery and
special
power
adapter.
the
adaptor
to depart
from AAA size)
Always
use
the unplug
correct
battery
type
(4 alkaline
AC adaptor
dims
theThe
usingdisplay
utility power.
The installment and replacement of battery
The
display
does not light up
3. Replace
the
1.Slide
off battery
the battery cover.
cover.
CAUTION
2.Press the “MEM” to
change the [YEAR].
2.Install the batteries by matching
the correct polarity, as shown.
In order to get the best
3.Replace the cover.
monitor, so that a time stamp can be assigned to each record that
is stored in the memory. (year :2000—2050,time:24 H)
(The year can be set to anywhere between 2000 and 2050.)
MEM
Replace
the batteries
when any ofso
the
following
occurs:
The old battery
is harmful
to the environment,
please
disposal
with other daily trash.
Replace
the batteries whenever
the below
happen
The
installment
and
replacement
of battery
Remove the old battery from the device and follow your local recycling guidelines.
shows
shows
1.Slide
off the
battery cover.
The display
dims
•TThe
he display
dims
2.Install
the batteries
display
does not lightby
up matching
the
correct
shown.
•The
displaypolarity,
does notas
light
up
CAUTION
3.Replace
the
cover.
Remove batteries if the device is not likely to be used for some time.
4
3.When you get the
right year, press
“SET” to set down
and turn to next step
automatically.
The old battery is harmful to the environment, so please disposal with other daily trash.
START STOP
SET
1.When the unit is off,
1. When
the
off,
3.When
youpressing
get unit
the is“SET”
hold
START STOP
MEM
SET
right
year,
press
press
hold
the to
“SET”
forand
3
seconds
enter
“SET”
to for
set
the
mode
for year
button
3down
seconds
to
and
turn
to
next
step
setting.
enter the mode settings.
automatically.
effect and protect you monitor,please use
CAUTION
the
right
battery
and
special
power adapter.
Remove batteries if the device is not likely to be used for some time.
•TThe
he
SET
BEFORE YOU START
MEM
MEM
START STOP
MEM
SET
START STOP
START STOP
SET
SET
2.Press the “MEM” to
change the [YEAR].
2. Press the “MEM” button
to advance to the current
[YEAR].
MEM
START STOP
5
SET
Remove the old battery from the device and follow your local recycling guidelines.
4
! CAUTIONReplace the batteries whenever the below happen

•If this device will be stored for an extended period of time, please remove the batteries
The
shows
in order to avoid corrosion.
The display dims
•Used batteries are harmful to the environment, so please dispose of appropriately.
Remove the old batteries
the device
andnot
follow
yourup
local recycling guidelines
Thefrom
display
does
light
•Battery corrosion is not covered under your three year limited warranty.
CAUTION
5
MEM
START STOP
SET
MEM
START STOP
SET
you get
the
3.3.When
Press “SET”
when
press
youright
haveyear,
reached
the
“SET” to set down
correct
year to save your
and turn to next step
choice
and
advance to
automatically.
the next step.
Remove batteries if the device is not likely to be used for some time.
The old battery is harmful to the environment, so please disposal with other daily trash.
Remove the old battery from the device and follow your local recycling guidelines.
4
4
55
SYMBOL
Systolic blood pressure
Tie the cuff
Tie result
the cuff
High pressure
Diastolic blood pressure
Low pressure the
result
position the tube off-center
DESCRIPTION
4.Repeat step 2 and 3 to set the [MONTH] and [DAY].
BEFORE YOU START
BEFORE YOU START
BEFORE YOU START
4.Repeat step 2 and 3 to set the [MONTH]
[DAY].
START and
STOP
E
M
EXPLANATION
1.Tie the cuff on your upper arm,
1.Tie the cuff on your upper arm,
toward the inner side
of arm in
♥Pulse/minute
Positioning
Cuff
the position thethe
tube off-center
S
E
UR
EA
M
MEASUREMENT
MEASUREMENT
MEASUREMENT
line
with
the
little
finger.
TieCUFF
the
cuff
the inner
side of arm in
Deflating
air istoward
exhausting
of deflating
4. Repeat steps 2 and 3 to set the [MONTH] and [DAY]
LCD DISPLAY
START
STOP
START STOP
line
with
the
little
finger.
4.Repeat
step
2
and
3
to
set
the
[MONTH]
and
[DAY].
1.
Make
sure
the
air
tube
is connected
BEFORE YOU START
MEASUREMENT
Tie
the
Time (hour:minute)
Currently
time cuff
1.Tie thesecurely
cuff on your
BATTERY COM
to theupper
unit. arm,
the
position
off-center
Memory
If “M”
shows,the
thetube
displayed
measurement
1.Tiethe
cuff
your
upper
values
isthe
from
theon
memory.
4.Repeat step 2 and 3 to set the [MONTH] and [DAY].
toward
inner
side
of arm
in arm,
Tie
the
cuff
AIR CONNECTOR PLUG
the
position
the
tube
off-center
For
instructions,refer
to Page
9
START STOP
START
STOP
line
with
the
little
finger.
START STOP
START STOP
2. Fasten
the cuff
on of
your
leftinupper
toward
the inner
side
arm
mmHg
Measurement
Unit
of theit blood
arm
and
position
so
thatpressure
the
tube
5.Repeat step 2START
andSTOP3 START
to set
STOP the [HOUR] and [SECOND].
1.Tie
the
cuff
on
your
upper
arm,
START STOP START STOP
line
with
the
little
finger.
(1mmHg=0.133kPa)
thetoward
position
tube
off-center
the the
inside
of arm
in line with
5.Repeat step 2 and 3 to set the [HOUR] and [SECOND]. kPa
Measurement
of the
blood
pressure
toward
theUnit
inner
side
of arm
in
your pinky
finger.
,
(1kPa=7.5mmHg)
cufffinger.
should be
START STOP
START STOP
m sung but not
line with2.The
the little
r
a er
r
t be able to
tooand
You
should
START STOP
START STOP
e sung
Low battery
Batteries2.The
are low
need
topbe
be
replaced
f should
cuff
List
en inbut not
ftight.
2~3cm
insert
one rfingers
the
up ff-c between
u
m
r
5.Repeat step 2 and 3 to set the
[HOUR]
and
START
STOP [SECOND].
START
STOP
too
tight.
You
should
be
able
to
c
o
a
u
remainding
Shocking
will cuff
result
in inaccurate
START STOP
STARTShocking
STOP
2.Cuff (Type
1.Blood Pressure Monitor
f but not too
3. The
bebesnug
oyour
cuffshould
and
arm.
o
y
e
2~3cm
insert one
the
u debetween
n fingers
.
(TMB-1018-A)
t
h
r
o
t
i
STOP
START STOP
tight. You
should
be
toeinsert one
5.Repeat step 2 and 3 to set the START
[HOUR]
and [SECOND].
e able
Average
The average
of and
blood
ff pressure
m
r s fing
th earm.
e cuff
cu your
ifinger
3c
n thencuff
~
between
and
your
arm.
o
e
e
T
i
n
2.The
cuff
should
be
sung
but
not
2
i ittl
START STOP
STARTRecalling
STOP
The erecordsthwill sbe
it showed
l
e po thebe eable
too tight. You
to
5. Repeat steps 2 and 3 to set the [HOUR] and [MINUTE]
Ti eshould
h
.
t
d be sung but not
5.Repeat step 2 and 3 to set the [HOUR] and [SECOND].
Irregular
heartbeat
1cuff
2.The
Arrhythmia
hshould
arbetween
2~3cm
t3.Sit
insert
one
fingers
thewith your left
th
wi
START STOP
START STOP
ow comfortably
START STOP
START STOP
too
tight.
You
should
be able
to
t
e
cuff
your
arm.
Grade
Theand
grade
of the
blood
pressure.
on a flat
lin resting
3. 4*AAA
alkaline batteries
4.User manu
2~3cm
onearm
fingers
thesurface.
3.Sit
comfortably
left
Forinsert
instructions,refer
to between
Pagewith
13 your
6.Repeat step 2 START
andSTOP3 START
to set
ot
STOP the [UNIT].
START STOP START STOP
n
4.
Sit
comfortably
with
your
left
arm
resting
on
2.The
cuff
should
beon
sung
butsurface.
not
t o
cuff and
your
arm.
arm
resting
a flat
bu t
6.Repeat step 2 and 3 to set the [UNIT].
tooa tight.
You should be able to
g ble e
flat surface.
n
a th
5 minutes
su e
insert oneResting
fingers for
between
the before
e d b een 2~3cm
START STOP
START STOP
b
l
measuring.
cuff
and
your
arm.
3.Sit comfortably
with
your
leftoutside
ld ou tw
If the
index
arrows
the area marked
Resting
for
5 fall
minutes
before
START STOP
START STOP].
2
ou sh s be
Y
Wait
atsurface.
least 3 minutes between
h
arm
resting
on
a
flat
A
s ou er .
measuring.
OP
please select
a different
size cuff.
[D
ST
ff
3.Sit“OK”,
comfortably
with your
leftallows
6.Repeat step 2 and 3 to set the
[UNIT].START STOP
measurements.
This
your
g
T
d
START STOP
START STOP
START STOP
AR
cu t. Y fin arm
Wait
at
least
3
minutes
between
n
ST
h
a
e
r
t
arm resting
a flat surface.
bloodon
circulation
to recover.
e
g
]
h ti
ef
measurements. This allows
H
on you
.T your
6.Repeat 7.After
step 2 and
3 to is
set
the START
[UNIT].
the unit
set,the
right
picture
STOP
START STOP
r l ce.
o
T
t
For
a
meaningful
comparison,
2
r
u
o
d
N
t se n
Resting for
5 minutes
before
blood
circulation
to recover.
yo rfa
will show,then it turn off automatically.MO
3.Sit comfortably
with your
leftsimilar
try to measure
under
in ff a
[
START STOP right picture
START STOP
th su
7.After the unit is set,the
i
measuring.
For
a
meaningful
comparison,
u
e
w lat
O P resting
arm
a flat
conditions.
Forsurface.
example, takec daily
ST
th
5on
minutes
before
y
show,then
it turn
off automatically.
T least
WaitResting
at
3measure
minutes
between
re
try tofor
under
similar
bl a f
6.Repeatwill
step
2 and 3 to
set the
[UNIT]. set
AR
a
ST
fo
n
measurements
at
approximately
t
n
measuring.
r
e
T
o
o
measurements.
This
allows
your
b pressure.
Forrest
example,
take 5daily
t
ee
•You conditions.
should
always
forthe
at least
minutes beforefomeasuring
your blood
R
START STOP
START STOP
g
s
w
3
the
same
time,
on
same
arm,
A
m
t
r
n
Waitmeasurements
at least
3 minutes
between
e
blood circulation
to recover.
at approximately
co esti
ut
be you
ST
nd
t
n
or
as
directed
by
a
physician.
a
i
i
s
Resting
for
5
minutes
before
r
measurements.
This
allows
your
7.After the unit is set,the right
U picture
].•Wait
S m allows your
START STOP
For
a meaningful
m blood ute ws
the
same3comparison,
time,
on the
samemeasurements.
arm,
,
O START
at least
minutes
between
6.
you have
set the
theSTOP ep 2
3. arThis
Yautomatically.
OP
NtoDmeasuring.
blood
circulation
to recover.
in allo er. ison
willOnce
show,then
it turn
offEclock,
r5
t
ST
try
measure
under
similar
or
as
directed
by
a
physician.
O
o
s
T
m
v
f
r
R
circulation
to
recover.
6
R
t
7aily
A
C
7.After
the
unit
is
set,the
right
picture
P
o
s
screen will read “done”Oand the monitor
a
O comparison,
3 i
Wait
atmeaningful
least
3 minutes
between
ST
g
a
For aFor
c
E
ST
example,
take daily
Fit turn off automatically.
T
tin g. ast . Th re omp ilar e d y
pe
[S conditions.
AR
will
show,then
E
s
T
e
measurements.
S This allows
try to measure
under
similaryour
will then6turn off automatically.
B
rin le ts to l c sim ta7k tel
START STOP
RSTART STOP
at approximately
nd measurements
Re measurements
a
4.
,
su t at en tion under
•For circulation
a meaningful
comparison,
try to take blood pressure
fu rsimilar
]a
blood
tosame
recover.
conditions.
Forthe
example,
take daily
a
R
the
same
time,
on
arm,
e ai rem la ing de ple xim e a
U
7.After the unit is set,the right picture
n
m
u
o
n
conditions.
For
example,
take
daily
measurements
at
approximately
the
same
time,
m
For
a
meaningful
comparison,
W
measurements
at
approximately
r
P
u
u xa p am
O
O
s irc ea
or as directed by a physician.
ST
[H
T
will show,then it turn off automatically.
ea d c m sure r e t ap e s icia
the
same
arm,
orsimilar
as directed
by a physician.
try
to
measure
AR
P
theon
same
time, under
on the
same
arm,
e
ST
TO
a
m
h
o a th ys
o
S
a
r
o
T
tt
AR
conditions.
Forby
example,
take
daily
or as directed
a physician.
bl Fo me s. F7 nts on ph
6
ST
se
n
to tio me e, y a 7
6
to
measurements at approximately
3
try ndi ure e tim7d b
d
6
the
same
time,
on
the
same
arm,
co as m cte
an
MEM
MEM
MEM
SET
MEM
MEM
MEM
MEM
Pulse
SET
MEM
SET
MEM
SET
MEM
MEM
SET
SET
SET
MEM
MEM
MEM
MEM
MEM
MEM
MEM
SET
MEM
SET
MEM
MEM
MEM
SET
MEM
SET
SE
MEMSET
MEM
ME
M
♥ Tips for Accuracy
SE
SET
MEM
T
SET
SET
MEM
ME
SET
T
S EMEM
SET
SET
SET
SET
SET
SET
SET
MEM
SET
MEM
SET
MEM
MEM
MEMSET
MEM
SET
MEM
SET
SET
SET
MEM
SET
SET
MEM
MEM
SET
MEM
MEM
SET
SET
SET
SET
SET
SET
SET
MEM
SET
SET
MEM
MEM
MEM
MEM
SET
SET
SET
MEM
MEM
SET
MEM
SET
START STOP
T
M
SET
SE
ME
MEM
SET
T
M
MEM
SET
S
ME
M
ET
SE
ME
M
ME
T
M
T
MEASUREMENT
LCD display
MEASUREMENT
Display
and save the
MEASUREMENT
MEASUREMENT
results
automatically.
MEASUREMENT
Start the Measurement
♥ Recalling Recorded Measurements
MEASUREMENT
1.Press
the
“START/STOP”
to turn on
Start
the
Measurement
♥ Start
the
Measurement
Start
the
Measurement
the monitor,
and
it will finish the whole
Start
the
Measurement
MEASUREMENT
1.Press
the “START/STOP”
START STOP
MEM
1.Press
the
“START/STOP”
to turn on to turn on
measurement
automatically.
Adjust
the
zero
the
monitor,
and
will whole
finish
Start
the
Measurement
1.Press
“START/STOP”
tothe
turnwhole
on
the monitor,
andthe
it will
finishit the
1. Press
theautomatically.
“START/STOP”
button
to turn
STARTSET
STOP
MEM
2.Press
the
“START/STOP”
LCD
display
measurement
automatically.
START
STOP
MEM
the
monitor,
and
ittowill finish the whole
measurement
automatically.
Start
the
Measurement
1.Press
the
“START/STOP”
to turn on
off,
otherwise
it
will
turn
on thepower
monitor.
The
whole
measurement
STARTSET
STOP
MEM
measurement
automatically.
START
STOP
MEM
LCD
display
the
monitor,
and
it will finish
theonwhole
off place
automatically
within
1 minute.
LCD
display
1.Press
the “START/STOP”
to turn
will take
automatically.
START STOP
MEM
measurement
automatically.
the
monitor, and
it will finish the whole
LCD
display
measurement automatically.
8
LCD display
MEM
SET
SET
SET
SET
SET
LCD display
Inflating and measuring
The LCD Display will power up.
Adjust the zero
automatically.
automatically.
Adjust
Adjust the
zero the zero
Adjust the zero
automatically.
automatically.
Adjust
the zero
The unit automatically.
will Adjust
adjust
tothe
zero
and
zero
automatically.
calibrate automatically.
(The
automatically.
Display
the
unit will calibrate
everyand
timesave
it
Inflating
and measuring
is turned results
on.)
automatically.
automatically.
Inflating
and measuring
Inflating and
measuring
Inflating
andmeasuring
measuring
automatically.
The unit automatically.
willInflating
inflate andand
begin
to
automatically.
Inflating and measuring
take the automatically.
measurement.
automatically.
2.Press the “START/STOP” to
CAUTION
power and
off, otherwise
Display
save the it will turn
off automatically within 1 minute.
automatically.
Once
theresults
measurement
hassave
beenthe
Display
and
save
Display
the
Display
and
saveand
the
taken, the unit
will
deflate,
display
results
automatically.
Display
and
save
the
results
automatically.
results
automatically.
the reading
and the category of the
8 andDisplay
save
the
reading, results
storeautomatically.
the and
reading
in the
memory. results automatically.
8
8
START STOP
2.Press the “START/STOP” to
2.Press the “START/STOP” to
power
off,
otherwise
it will turn
power
off,“START/STOP”
otherwise
it will turn
2. Press the “START/STOP”
button to turn
2.Press
the
to
2.Press theoff
“START/STOP”
to
automatically
within
minute.
off automatically within 11minute.
power
off,
otherwise
it
will
turn
the monitor
off,
otherwise
the
monitor
will
2.Press
the “START/STOP”
to
power off,
otherwise
it will turn
MEM
off automatically
within
1 minute.
poweroff
offautomatically
automatically
within
1 1minute.
power
off,
otherwise
it will
turn
within
minute.
2.Press the “START/STOP” to
automatically within 1 minute.
power off, otherwise it will turn
8 8 off
off automatically within 1 minute.
8
8
the record,date,
CUFF air is exhausting of deflating
THE OPERATION OF
record.Deflating
START STOP RECALLING
MEM
SET
time will display
RECORDS
Time
(hour:minute)
Currently
time
The
corresponding
The corresponding
It means
the total
THE
OPERATION
OF
alternately.
RECORDED
MEASUREMENTS
THE
OPERATION
OF
date is 10th November. time is 10:38.RECALLING RECORDS
of records is 8,
Memory
If
“M”
shows,
the
displayed
measurement
RECALLING
RECORDS
The sign
"AVG"
THE OPERATION OF
the of
current
is the No 2.
values is from the memory.
Recalling
RECALLING RECORDS
will show in thethe
right records
For instructions,refer to Page 9 THE OPERATION OF A
corner.
RECALLING RECORDS
Recalling
the records
1.
Please
press
the
Recalling
the
records
mmHg
Measurement Unit of the blood pressure
CAUTION
“MEM”
to
show
the
THE OPERATION OF
Recalling
the records
(1mmHg=0.133kPa)
1.
Please
RECALLING RECORDS
1. Please
press
the press
average
of button
the theto display
1. Press
therecent
“MEM”
The
most
record
(1)
is
shown
first.
Each new
“MEM”
to
showthe
the records
Recalling
the
kPa
Measurement Unit of the blood pressure
1.
Please
press
“MEM”
to
show
the
record.
the
average
of
the
records.
measurement
is to
assigned
record.
START records
STOP
MEMAll other
SET
average
ofshow
the theto the first (1)
(1kPa=7.5mmHg)
average of“MEM”
the records
SET
START STOP
Recalling
the
1.record.
Please
press
the (e.g., 2 becomes 3, MEM
2.
Press
the
“MEM”
are
pushed
back
one
digit
and
so
on),
and
the
average
of
the
record.
Low
battery
Batteries
are
low
and
need
to
be
replaced
START
STOP
MEM
SET
“MEM”
show
thefrom the list.
or
“SET”
to
get
the
MEM
1. last
Please
pressrecord.
the
record
(60)
istodropped
The
sign
of
"AVG"
UPSTART STOP SET
DOWN
average
of
the
record
you
want.
“MEM” to show
the
STOP
MEM
SET
Shocking
remainding
Shocking
will
resultSTART
in inaccurate
1.
will show in the right
average of therecord.
The
sign of "AVG"
(
The
sign
of
"AVG"
corner.
START
STOP
SET
record.
will
display
onright
the
Average
The averageMEM
of blood
pressure
willthe
show
in of
the
The
sign
"AVG" MEM START STOP SET
will show in
right
9
rightcorner.
side
of the
Recalling
The erecords will be showed
show
in screen
the right
corner. will
The
sign
of
"AVG"
The sign ofcorner.
"AVG"
Irregular heartbeat
Arrhythmia
will
show
in the right
will show in the
right
corner.
corner. Grade
SET
STOP
STARTpressure.
The grade MEM
of the blood
2. Press the “MEM”
3.
For
instructions,refer
to
Page
13
The
order
of
or “SET” to get the
SET
STOP
START
MEM
2. Press
either
the
“MEM”
button
or
DOWN
2.
Press
the want.
“MEM”
SET
MEMUP START STOP
the
record,date,
2. Press the
“MEM”
record
you
the
“SET”
button
to
toggle
between
or
“SET”
to
get
the
SET
STOP
START
MEM
time
will
display
2.
Press
the
“MEM”
or “SET” to get the
UP The
DOWN
SETcorrespondingDOWN
MEM
The corresponding
It means
theSTART
total STOP
UP
2. Press
“MEM”
record
you
thethe
records.
alternately.
or
“SET”
to want.
get theof records
record
you
want.
SET
STOP
START
MEM
date
is
10th
November.
time
is
10:38.
is
8,
the “MEM”
“SET” to 2.
get Press
the
UP
DOWN
2or
record you want. UP
DOWN
record you want.
or “SET” to get thethe current is the No 2.
UP
DOWN
record you want.
MEM
START STOP
SET
The order of
The most recent record (1) is shown first. Each new
the record,date,
The
order
measurement
The
order
the of is assigned to the first (1) record. All other records
The
order
of
time
willof
display
The order of
The corresponding
corresponding
means the total
the
record,date,
The
order
the
record,date,
the
record,date,
alternately.
are
pushed
digit (e.g., 2 becomes
3, and soThe
on),
and the
record,
date,
andofbackItofone
date is 10th November. time is 10:38.
records is 8,
time
will
display
time
willwill
display
the
record,date,
time
display
last
record
(60)
is
dropped
from
the
list.
timealternately.
will
display
corresponding
The corresponding
It total
means
the
total
current
isThe
the corresponding
No 2. The
The
order
oftotalthethe
The corresponding
The corresponding
It means
the
The corresponding
It means
alternately.
time will
display
alternately.
date is 10th
November. date
time isis10:38.
of records
is 8,
10th November.
time is 10:38.
of8,records
is date
8,
the record,date,
alternately.
is
10th
November.
time
is
10:38.
of
records
is
The corresponding
The corresponding
the total
the current is the NoIt
2.means
alternately.
the
current
is the No 2.
the
current
is
the
No
2.
time will display
date is 10th November. time is 10:38.
of records is 8,
The corresponding
It means
totalNo 2. The corresponding
currentthe
is the
alternately.
CAUTION the
CAUTION
9
date is 10th November. time is 10:38.
of records is 8,
current (1)
is the
2.
recenttherecord
isNo
shown
first. Each new
The
most
CAUTION
START STOP
MEM
START STOP
SET
SET
STARTSET
STOP
MEM
START
STOP
START STOP
MEM
SET
MEM
MEM
START STOP
SET
SET
The CAUTION
most recent record (1) is shown first. Each new
measurement
is assigned to the first (1) record. All other records
CAUTION
measurement
is
assigned
to
the first
(1)shown
record.
Allshown
other
records
The
most
recent
(1) isfirst.
first.
Each new
The !most
recent
record
(1)record
is
Each
new
are
pushed
back
one
digit (e.g.,
2sobecomes
3, and so on), and the
CAUTION
are pushed measurement
back
one
digit recent
(e.g.,
2 becomes
3, the
and
on),
and
the
is
assigned
to
first
(1)
record.
other records
CAUTION
The
most
record
(1)
is
shown
first.
Each
new
measurement
is assigned
to
the firstfrom
(1) record.
All other All
records
lastrecent
record
(60)
dropped
thefirst.
list.Each
last record
(60)
dropped
from
The most
record
shown
new
measurement
assigned
Misthe
1 list.
60
areispushed
back
one
digit is(e.g.,
2 becomes
3, and
so on), is
and
the

measurement
is assigned
to
first3,(1)
record.
Alland
other
are pushed
backmost
one recent
digit
(e.g.,
2 becomes
and
so Each
on),
therecords
The
record
(1)the
is shown
first.
new
the first
(1)
record.(60)
All other
records
are
pushed
back one 3,
digit
(e.g.,
2on),
becomes
and
last(60)
record
isone
dropped
from
the
list.
are
pushed
back
digit
(e.g.,
2
becomes
and
so
and 3,
the
lasttorecord
is
dropped
from
the
list.
measurement is assigned to the first (1) record. All other records
so on),last
and record
the last record
is
dropped
from
the
list.
60digit
60from
isMone
dropped
list.
9 so on), and the 9
are pushed(60)
back
(e.g.,the
2 becomes
3, and
last record (60) is dropped from the list.
9
9
9
9
THE OPERATION OF
RECALLING MEASUREMENTS
RECORDS
RECORDED
INFORMATION FOR USER
USER INFORMATION
OPERATION OF
♥ THE
Deleting
a Record from the Memory
RECALLING
RECORDS a measurement record from memory
Deleting
THE
OF the measurement results in the memory by following
YouOPERATION
can
delete
If you
didall
not get the correct measurement, you can delete all
RECALLING
RECORDS
THE OPERATION
OF
theresults
steps below:
by following below steps.
RECALLING
RECORDS
Deleting a measurement record from memory
1.Hold pressing “MEM”
If
you
did
not
the correct measurement,
can memory
delete all
1. Press
and
the
“MEM”
for 3hold
seconds
,the
Deleting
aget
measurement
recordyou
from
results
by
following
below
steps.
flash
display
awill
measurement
recordyou
from
memory
buttonIfDeleting
foryou
3 seconds
– the
display
did
not
get
the correct measurement,
can delete
all
MEM
START STOP
SET
el all
el one
show.
will results
alternately
flash
“DELget
ALL”the
If you
did
not
correct
measurement, you can delete all
by
following
below
steps.
SET
START STOP
MEM
andresults
“DEL
ONE”.
bypressing
following
below steps.
1.Hold
“MEM”
for 3 seconds ,the
1.Hold pressing “MEM”
If you don’tflash
wantdisplay
to deletewill
any of
for
3 seconds
1.Hold
pressing ,the
“MEM”
show.
the records,
the “START/
flash
display
will
forpress
3 seconds
,the
STOP” button
to
escape.
show.
flash display
will
2.Press
“SET” to
MEM
START STOP
SET
MEM
START STOP
SET
MEM
START STOP
SET
show.
confirm deleting and
the monitor will turn
off the
automatically.
2. To delete
most recent re-
cord, wait
until the“SET”
display
2.Press
to shows
“DEL ONE”,
then press
the “SET”
confirm
deleting
and
“SET”
to record.
the monitor
will
turn
button to2.Press
delete
the
latest
confirm
deleting
2.Press
“SET”
to and
offyou
automatically.
3.If
don’t
want
to delete the
the
monitor
will
turn
confirm
deleting
and
records,
press
“START/STOP”
to
3. To delete
all
of the records
off
automatically.
the
monitor
will turnat
escape.
once, repeat
step 1 and when the
off automatically.
display shows “DEL ALL” press
3.Ifbutton.
you don’t want to delete the
the “SET”
4. records,
If there ispress
no record.
“START/STOP” to
3.Ifthe
you
don’t
want will
to delete the
right
display
escape.
The word
“DONE”
will
appear
records,
press
“START/STOP”
3.If
you don’t
want
toatdelete the to
show.
the bottomescape.
of the screen
the
records,
pressonce
“START/STOP”
to
escape.
action has been completed.
4. If there is no record.
the right display will
4. show.
If there is no record.
the
right
will
4.
isdisplay
no record.
4. If there Ifis there
no
record,
show.
the right display will
the display will be blank.
show.
10
10
MEM
START STOP
SET
MEM
START STOP
SET
MEM
START STOP
SET
START STOP
SET
el
MEM
MEM
START STOP
SET
MEM
START STOP
SET
MEM
START STOP
SET
♥ Tips
Tips for
formeasurement
Measurement
INFORMATION FOR USER
taken under some
may
the
ItMeasurements
can cause incorrectness
if thecircumstances
measurement
arecause
taken
inmonitor
the USER
INFORMATION
FOR
to
provide
inaccurate
readings:
INFORMATION
FOR USER
following circumstances.
Tips for measurement
It can cause
incorrectness if the measurement are taken in the
Tips
for measurement
following
circumstances.
Tips
for measurement
It can cause incorrectness if the measurement are taken in the
It can cause
incorrectness if the measurement are taken in the
following
circumstances.
following circumstances.
Immediate measurement
after dinner or drinking
Always wait at least 1 hour
after eating or drinking
Immediate measurement
after tea, coffee, smoking
Never take a reading immediately after
drinking tea or coffee, or after smoking.
Immediate measurement
after dinner or drinking
Immediate measurement
after dinner
or drinking
Immediate
measurement
after dinner or drinking
Immediate measurement
after tea, coffee, smoking
Immediate measurement
after
tea, coffee,
smoking
Immediate
measurement
after tea, coffee, smoking
Immediate measurement
after taking a bath
When talking or moving your fingers
Always wait at least 20 minutes after
taking a bath or shower
Immediate measurement
after taking a bath
Immediate measurement
after taking
a bath
Immediate
measurement
after taking a bath
In a very cold environment
Never take a reading in a
Never take a reading while talking
or moving your fingers
When talking or moving your fingers
When talking or moving your fingers
When talking or moving your fingers
When you want to discharge urine
Never take a reading when you
very cold
cold environment
In a very
environment
the restroom
When youneed
wanttotouse
discharge
urine
In a very cold environment
In a very cold environment
When you want to discharge urine
When you want to discharge urine
11
11
USER INFORMATION
ABOUT BLOOD PRESSURE
INFORMATION
INFORMATION
INFORMATION
INFORMATION
INFORMATION
INFORMATION
ABOUT
BLOOD
PRESSURE
ABOUT
BLOOD
PRESSURE
ABOUT
BLOOD
PRESSURE
ABOUT
BLOOD
PRESSURE
ABOUT
BLOOD
PRESSURE
ABOUT
BLOOD
PRESSURE
♥ What are Systolic and Diastolic Pressure?
♥ Care
and Storage
Maintenance
Maintenance
Maintenance
Maintenance
In
order
to get the best performance out of your blood pressure monitor,
Maintenance
Maintenance
In order to get the best performance, please follow the below
In order
tothe
get
the best performance,
please follow the below
please
follow
instructions
below:
order
to
get
the
best
performance,
please
follow
the
below
In
order
to
get
the
best
performance,
please
follow
the
below
In
order
to
get
the
best
performance,
please
follow
the
below
InIn
order
to
get
the
best
performance,
please
follow
the
below
instructions.
instructions.
instructions.
instructions.
instructions.
instructions.
Avoid
touching
water,
Avoid
touching
water,
Do
not
submerge
inwater,
water
or
Avoid
touching
Avoid
touching
water,
Put in
drya place
and and
avoid
the sunshine
itAvoid
with
atouching
dry
cloth
in
case.
water,
Avoid
touching
water,
Puta in
dry place
avoid
the sunshine clean
clean
it
with
a
dry
cloth
in case.
Avoid
direct
sunlight.
other
liquid.
Put
place
and
avoid
the
sunshine
Put
a place
dry
place
and
avoid
the
sunshine clean
clean
cloth
case.
clean
itany
with
a cloth
dry
cloth
in
case.
Put
adry
dry
place
and
avoid
the
sunshine
clean
itwith
with
adry
dry
cloth
case.
Put
ininin
aain
dry
and
avoid
the
sunshine
it itwith
aadry
ininin
case.
What
areare
systolic
pressure
and
diastolic
What
systolic
pressure
and
diastolic
What
are
systolic
pressure
and
diastolic
What
are
systolic
pressure
and
diastolic
What
are
systolic
pressure
and
diastolic
What
are
systolic
pressure
and
diastolic
When the ventricles contract to pump blood out of the
pressure?
pressure?
heart, the blood pressure reaches its highest pressure
pressure?
pressure?
pressure?
pressure?
Systolic
When
ventricles
contract
and and
pump
Systolic Diastolic
Diastolic
When
ventricles
contract
pump
in
the
cycle.
known
as systolicDiastolic
pressure.
The
Systolic
Systolic
Diastolic
entering
blood
discharging
When
ventricles
contract
and
pump
When
ventricles
contract
and
pumpThis is
Systolic
Diastolic
blood
entering
blood
discharging blood
Systolic
Diastolic
When
ventricles
contract
and
pump
blood
outventricles
of
blood
pressure
When
contract
and
pump
blood
outthe
of heart,
the
heart,
blood
pressure
vein
blood
entering
blood
entering
blood
discharging
blood
discharging
artery
lowest
blood
pressure
in
the
cycle
occurs
when
the
vein
blood
entering
blood
discharging
entering
blood
discharging
artery blood
blood
out
of
the
heart,
blood
pressure
blood
out
of
the
heart,
blood
pressure
blood
out
of
the
heart,
blood
pressure
reaches
its
maximum
value,
the
highest
blood
out
of
the
heart,
blood
pressure
vein
vein
reaches
its
maximum
value,
the highest
artery
artery vein
vein
artery
artery
heart
relaxes
between
heartbeats,
and
this
is known as
reaches
its
maximum
value,
the
highest
reaches
its
maximum
value,
the
highest
reaches
its
maximum
value,
the
highest
pressure
in
the
cycle
is
known
as
systolic
reaches
its maximum
value,
the highest
pressure
in the cycle
is known
as systolic
presspress
relaxrelax
pressure
inin
the
cycle
isis
known
as
systolic
pressure
in
the
cycle
is
known
as
systolic
diastolic
pressure.
pressure
the
cycle
known
as
systolic
pressure.
When
the
heart
relaxes
between
pressure
in
the
cycle
is
known
as
systolic
press
relax
press
relax
pressure. When the heart relaxes between press
press
relax
relax
pressure.
When
the
heart
relaxes
between
pressure.
When
the
heart
relaxes
between
pressure.
When
the
heart
relaxes
between
heartbeats,
the
lowest
blood
pressure
is is
pressure.
When
the
heart
relaxes
between
heartbeats,
lowest
blood
pressure
heartbeats,
the
lowest
blood
pressure
heartbeats,
the
lowest
blood
pressure
is
heartbeats,
the
lowest
blood
pressure
diastolic
pressure.
The
systolic
is the top number in your blood
heartbeats,
the
lowest
blood
pressure
isisispressure
diastolic
pressure.
diastolic
pressure.
diastolic
pressure.
diastolic
pressure.
diastolic
pressure.
pressure
reading,
and
the diastolic is the bottom number.
What
is
the
standard
blood
pressure
What is the standard blood pressure
What
standard
blood
pressure
What
isthe
the
standard
blood
pressure
What
isthe
the
standard
blood
pressure
What
isis
standard
blood
pressure
classification?
classification?
classification?
classification?
classification?
classification?
♥ What is a Normal
Blood Pressure?
Below
illustrates
the blood
pressure
Below
illustrates
the blood
pressure
Below
illustrates
the
blood
pressure
Below
illustrates
the
blood
pressure
Below
illustrates
the
blood
pressure
classification
mode
by
World
Health
Below
illustrates
the
blood
pressure
classification
mode
by
World
Health
classification
mode
World
Health
classification
mode
by
World
Health
classification
mode
by
World
Health
Organization
(WHO)
and
International
classification
mode
byby
World
Health
Organization
(WHO)
and
International
Organization
(WHO)
and
International
Organization
(WHO)
and
International
The
following
charts
illustrate
the blood
Organization
(WHO)
and
International
Society
of Hypertension(ISH)
in 1999.
Organization
and
International
Society
of(WHO)
Hypertension(ISH)
in 1999.
pressure
classification
level
established
Society
of
Hypertension(ISH)
1999.
Society
of
Hypertension(ISH)
in
1999.by
Society
Hypertension(ISH)
in
1999.
Society
ofof
Hypertension(ISH)
inin
1999.
Avoid
the intense
shaking
Avoid
the intense
shaking
Avoid
the
intense
shaking
Avoid
the
intense
shaking
and
collision
Avoid
the
intense
shaking
Avoid
shaking
or
dropping
the
monitor.
Avoid
the
intense
shaking
and
collision
and
collision
and
collision
and
collision
and
collision
Avoid
the dusty
and and
unstableAvoid
the
dusty
unstableStore
atthe
room
temperature
in
Avoid
the
dusty
and
unstableAvoid
dusty
and
unstabletemperature
environment
Avoid
the
dusty
and
unstableAvoid
the
dusty
and
unstabletemperature
environment
a
dry,
clean
environment.
temperature
environment
temperature
environment
temperature
environment
temperature
environment
the World Health Organization (WHO) and
International Society of Hypertension (ISH)
in 1999.
BP Level
(mmHg)
SYS
DIA
Using
the
wet
clothing
to remove
the
Avoid
washing
the cuff
Using
theuse
wet
clothing
remove
the dirt
Avoid
washing
the cuff
Never
a wet
cloth
toto
remove
dirt. dirt
Using
the
wet
clothing
to
remove
the
dirt
Avoid
washing
the
cuff
Using
the
wet
clothing
to
remove
the
dirt
Avoid
washing
the
cuff
Using
the
wet
clothing
to
remove
the
dirt
Avoid
washing
the
cuff
Using
the
wet
clothing
to
remove
the
dirt
Avoid
washing
the
cuff
Do
not
wash
the
monitor
or
the
cuff.
Always use a clean, dry cloth.
Instructions
for correct
replacement
of interchangeable
or detachable
partsparts
Instructions
for correct
replacement
of interchangeable
or detachable
Instructions
for
correct
replacement
of
interchangeable
detachable
parts
Instructions
for
correct
replacement
of
interchangeable
or
detachable
parts
Instructions
for
correct
replacement
of
interchangeable
or
detachable
parts
specified
by MANUFACTURER
as replaceable
by SERVICE
PERSONNEL.
Instructions
for
correct
replacement
interchangeable
oror
detachable
parts
specified
by
MANUFACTURER
asofreplaceable
by SERVICE
PERSONNEL.
specified
by
MANUFACTURER
as
replaceable
by
SERVICE
PERSONNEL.
specified
by
MANUFACTURER
as
replaceable
by
SERVICE
PERSONNEL.
specified
by
MANUFACTURER
as
replaceable
by
SERVICE
PERSONNEL.
specified by MANUFACTURER as replaceable by SERVICE PERSONNEL.
12
12
12
12
121212
LevelLevel
Blood Blood
Level
Level
Optimal
BP
Level
Level
Pressure
Blood
Blood
Pressure
Blood
Blood
(mmHg)
Pressure
Pressure
(mmHg)
Pressure
Pressure
(mmHg)
(mmHg)
(mmHg)
(mmHg)
SYS
SYS
<120
SYS
SYS
SYS
SYS
DIA DIA
DIA
DIA
<80
DIA
DIA
Normal BP
Mild
Hypertension
Moderate
Hypertension
Severe
Hypertension
<140
>180>180
160~179
<140 140~159
140~159
160~179
120~139
140~159
160~179
<140
<140 140~159
140~159
>180
140~159160~179
>180
160~179
160~179 >180
<140
140~159
>180
160~179
<140
<90 <90
90~99
90~99 100~109
100~109 >110>110
<90
<90
90~99
100~109
>110
90~99
100~109
>110
80~89
90~99
100~109
<90
90~99
100~109
>110
<90
90~99
100~109
>110
>180
>110
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
OnlyOnly
a! physician
cancan
tell you
youryour
normal
blood
pressure
range
a physician
tell you
normal
blood
pressure
range

Only
aaphysician
can
tell
you
your
normal
blood
pressure
range
Only
a
physician
can
tell
you
your
normal
blood
pressure
Only
physician
can
tell
you
your
normal
blood
pressure
range
Only
aphysician
physician
can
tellyou
you
your
normal
pressure
range
and
the
point
at
which
Only
athe
can
tell
you
your
normal
blood
pressure
range
and
the
point
at which
are
at
risk.
Consult
your
physician
torange
and
point
at
which
you
are
atblood
risk.
Consult
your
physician
to you are at risk.
and
the
point
at
which
you
are
at
risk.
Consult
your
physician
to
and
the
point
at
which
you
are
at
risk.
Consult
your
physician
to
Consult
your
physician
to
obtain
these
values.
and
the
point
at
which
you
are
at
risk.
Consult
your
physician
to
and
the
point
at
which
you
are
at
risk.
Consult
your
physician
to
obtain
these
values.
obtain
these
values.
obtain
these
values.
these
values.
obtain
these
values.
IfIf
the
measurements
taken
with
these
fall
outside
thefall
range,
your
obtain
these
values.
Ifobtain
the
measurements
taken
withproducts
these
products
outside
the physician.
the
measurements
taken
with
these
products
fallconsult
outside
the
If
the
measurements
taken
with
these
products
fall
outside
the
If
the
measurements
taken
with
these
products
fall
outside
the
the
measurements
takenwith
withthese
theseproducts
productsfall
falloutside
outsidethe
the
If Ifrange,
the
measurements
taken
range,
consulty.
consulty.
range,
consulty.
range,
consulty.
range,
consulty.
range,
consulty.
13 13
13
1313
13
13
ABOUT BLOOD PRESSURE
TROUBLESHOOTING
Why my blood pressure
varies
one
♥ Whyisdoes
myeven
bloodinpressure
day? throughout the day?
fluctuate
1.Why
Individual
pressure
varies
myblood
blood
pressure
1. Individual
readings can
every blood
in onepressure
day, it also
affectednaturally
by the
vary throughout
the day, soeven
the best
accuracy,
inyour
one
wayis
youvaries
tie
your cuffforand
the
take your readings the same way each time. (See
measurement position, so please take
day?on page 7.)
Tips for Accuracy
the measurement at the same condition.
This section includes a list of error messages and frequently
TROUBLESHOOTING
asked questions SYMBOL
for problems
you may encounter
with your
blood
DESCRIPTION
EXPLANATION
pressure monitor. If the products
not
operating
as
you
think
it
Systolic blood pressure High pressure result
This
section
includes
a
list
of
error
messages
and
frequently
asked
should, check here before arranging for servicing.
ABOUT BLOOD PRESSURE
Diastolic blood pressure
Display
is dim
or Time
(hour:minute)
Currently time
should,
check
here
before
arranging
for servicing.
No
power
Insert the batteries
Batteries are inserted
will not light up.
1. Individual blood pressure varies
2.The varies of the pressure is
2. Blood pressure
can
fluctuate
if youby
arethe
every inreadings
one day,
it also
affected
greater if the person take medicine.
taking medications.
way you tie your cuff and the your
Low
PROBLEM
batteries
No power
2.The varies of the pressure is
Thepressure
attention
need to pay
Why
the blood pressure
at home you
greater if the person take medicine.
when should
you measure
yousure
blood
always make
I get3.Waiting
from atthe
leasthospital
4-5 minutes for
pressure
at home:
the cuff
is fastened and
♥ Why isanother
the reading
I
get
from
measurement.
If theplaced
cuff is properly,
tied properly.
is different
from home?
and that the
a healthcare
provider
different
If
the
cuff
is
tootoo
tight
or too
loose.
cuff
is
not
tight
or too
The
blood
pressure
is
different
even
need
pay
Why
the
blood
pressure
If theThe
cuff attention
is tied on the
uppertoarm.
loose.
fromduring
the
ones
I
take
at
home?
24 hour because of the
you
measure
you blood
Ifwhen
you feel
anxious
pressured.
I get fromexercise
the hospital
weather,emotion,
etc,
You
had better
deep breath 2-3
pressure
at take
home:
Make sure
you are not
Your blood
pressure
can be coat”
different
even during a times before
specially
the “white
in hospital
beginning.
Ifoverly
the cuff
is tied or
properly.
ismakes
different
from
home? Advice:adjust
anxious
stressed
24 hour
period
because
factorsare
likehigher
the weather,
which
theofresults
yourself for 4-5
When taking your blood
the
cuff
too tightyour
or too loose.
Theones
blood
pressure
different
even minutesIfas
this
williscalm
elevate
emotional
recent
exertion,
etc.
thanstate,
the
atexercise
home. or is
you
If until
the cuff
is tied down.
on the upper arm.
readings. It is recommended
during
24behour
because
of the
Your readings
may
elevated
in a healthcare
setIf you feel anxious pressured.
to take 2-3 deep breaths
weather,emotion,
exercise
etc, coat
ting because
of anxiety caused
by the “white
You had better take deep breath 2-3
before
beginning
to take
coat” inathospital
effect” andspecially
you may the
get “white
lower readings
home
times
before
beginning.
your
blood
pressure.
which
makes
the
results
are
higher
where you are calmer.
Advice:adjust yourself for 4-5
than the ones at home.
minutes until you calm down.
If the result is the same
if measuring on the
right arm?
ItIf
is the
ok for result
both arms,is
there same
the
♥ Which
arm
should
Ibut
use
to
will be some different results for
if measuring
onyouthe
takedifferent
my
blood
pressure?
person, so
suggest
measure
the
same
arm
every
time.
right arm?
Blood pressure readings can be taken on either the right
It is
okrecommended
for both arms,
or left arm, but
it is
to but
takethere
readings using
willConsult
be some
different
results
the left arm.
your
physician
if youfor
think you need
different
suggest arm
you you use, it
to use your
right armperson,
instead.so
Whichever
14
is important
to take your
blood pressure
using
the same
measure
the same
arm every
time.
arm every time you take a reading.
14
14
incorrectly.
Memory
PROBLEM SYMPTOM
3.Waiting
at least
4-5 minutes
for take
measurement
position,
so please
another
measurement.
2. If you
are
multiple readings,
wait atcondition.
least 3
thetaking
measurement
at the same
minutes between readings for best accuracy.
Low pressure result
questions
for problems
you
may
with your
pressure
This section
includes
a list
ofencounter
error messages
andblood
frequently
Pulse
Pulse/minute
monitor.
If SYMPTOM
this product
is not
operating
as you think
it should,
please
PROBLEM
CHECK
THIS
REMEDY
asked
questions
for problems
you may
encounter
with
your blood
Deflating
CUFF
air
is
exhausting
of
pressure
monitor.
the products
not
operating
as you
think
it deflating
check here
beforeIfarranging
forare
service.
Replace
with new
batteries
Batteries
exhausted.
Ifcorrectly
“M” shows, the displayed measurement
the memory.
CHECK THISvalues is from
REMEDY
Show on
For
instructions,refer
to Page 9
SYMPTOM
REMEDY
Replace
with new
batteries
BatteriesCHECK
are low. THIS
Batteries are exhausted. Replace with new batteries
the display
Display is dimmmHg
or
Measurement Unit of the blood pressure
Insert
thecuff
batteries
Are isthe
dead?
Replace
with
new
batteries.
are
inserted
Refasten
the
and
then
cuff
notbatteries
secure.
(1mmHg=0.133kPa)
not light up.TheBatteries
E 1 will
shows
Display is dim or incorrectly.
correctly
measure
again.
No Power
will not light up
kPa Are the batteries
Measurement
Unit
of the blood pressure
Insert the
batteries
Low
Show on
Refasten
the cuff and then
(1kPa=7.5mmHg)
inserted
correctly?
correctly.
Replace
with new batteries
are
low.
E 2 shows
TheBatteries
cuff
is very
tight
measure again.
the display
batteries
Low battery
Batteries are low and need to be replaced
Low
shows
Are
the
batteries
low?
Replace
with
pressure
thesecure.Relax
for a moment
Refasten
the
cuffnew
andbatteries.
then
cuff isofnot
on1the
display TheThe
Batteries E 3 E
shows
shows
Shocking
remainding
Shocking
result
in inaccurate
again.again.
cuff is excess.
and measure
then will
measure
Error
massage
Error
massage
Error
Message2
The monitor detected
“E 1” Shows on
Refasten
the
take
Average
The
average
ofthe
blood
pressure
movement
can
affect
theand
Refasten
cuffcuff
and
then
thatcuff
theiscuff
is not
E
2 display
shows
The
very
tight
the
a new reading.
The monitor
detected
measurement.Relax
for
a
measure
again.
E 10 or
secure
Recalling
erecords
will be showed
motion while measuring. The
moment
and then
E 11 shows
The
pressure
of
the
Relax
for
a moment
measure
again.
“E32”shows
Shows on
The monitor detected
Refasten
the cuff and take
E
Irregular
heartbeat
Arrhythmia
cuff
excess.
then reading.
measure again.
the display
thatisthe
cuff is too tight and
a new
Relax
for aofmoment
and
E 20 or
Grade
The
grade
the blood
pressure.
Measure incorrectly.
movement
can affect the
The monitor detected
theninstructions,refer
measure again.
E 21 shows
For
to
Page
13
“EE 3”
on The monitor detected
Relax for a moment
and
10Shows
or
that the pressure of the measurement.Relax for a
the
display
then take
athen
new reading.
motion
while
measuring.
moment
and
E 11
shows
Retake the measurement.
cuff is in excess
If themeasure
problemagain.
persists,
affect the
contactMovement
the retailercan
or our
Relax
for a moment
andfor a
20 or
“EE 10”
or on A calibration
measurement.
Relax
Eexx,shows
error
customer
service
Measure
incorrectly.
The monitor detected then measure again.
E 11”
21 shows
“E
Shows
on
moment
and
then
the display.
department for further take a
occurred.
motion while measuring
new reading.
Try to remain
the display
assistance.Refer
to the
Retake
the
measurement.
stillfor
for
the
second reading.
warranty
contact
If the problem persists,
information and return
contact
the
retailer
or our
Take a
new
reading.
If the
instructions.
Eexx,shows on A calibration error
customer
problemservice
persists, contact
the display.
further
occurred.
“EEXX”
Shows
A calibration error oc- department
customer for
service
for further
assistance.Refer
to the
assistance. Refer
to page
on the display
curred
warranty
for contact
21 for warranty
and contact
information
and return
information.
instructions.
15
15
15
SPECIFICATIONS
SPECIFICATIONS
♥ Complied European Standards List
EN/ISO 14971:2007
Graphical symbols for labeling medical devices
EN 980: 2008
Power Supply
Four AAA Alkaline Batteries (included)
Display Model
Digital LCD V.A. 5.5” x 1.5”
Medical equipment manufacturers to provide information
EN 1041: 2008
Measurement Mode
Oscillographic Testing Mode
Medical equipment Part1-1: General Requirements for Safety Collateral Standard: Safety requirements for
medical electrical systems
EN 60601-1:
1990+A1+A2+A13
Measurement Range
Pressure: 0 - 300mmHg
Pulse Value: 40 - 199 beats/minute
Non-Invasive blood pressure Part 1: General Requirements
EN 1060-1: 2001/A1:2002
Pressure: Within ± 3mmHg
Pulse Value: ± 5%
Non-Invasive blood pressure Part 3: Supplementary requirements for electromechanical blood pressure
measuring system
EN 1060-3: 1997/A1:2005
Normal Working Conditions
Temperature: Approx. 41˚F - 104˚F
Relative Humidity ≤ 80%
Automatic Blood Pressure Monitor overall system interventional accuracy of the testing process
EN 1060-4: 2004
Cuff Circumference
Approx. 8.5” - 16.5” (22cm - 32cm)
Medical electrical equipment Part 1-2: Basic safety and essential performance of the general requirements
Collateral Standard: Electromagnetic compatibility requirements and tests
EN 60601-1-2:2001+A1: 2006
Accuracy
Weight
External Dimensions
Parts Included
Mode of Operation
Degree of Protection
Protection Against
Ingress of Water
Approx. 12.2 oz (excluding batteries)
Table 1
Approx. 7” x 3.75” x 1.5”
Four AAA Alkaline Batteries, an Adult Cuff,
and a User Manual
Continuous Operation
Type B Applied Part
Guidance and manufacture’s declaration – electromagnetic emissions - for all EQUIPMENT and SYSTEMS
Guidance and manufacture’s declaration – electromagnetic emission
The 526018 is intended for use in the electromagnetic environment specified below. The customer of the user of the 526018
should assure that it is used in such and environment.
Emission Test
Compliance
Electromagnetic Environment - Guidance
RF emissions
CISPR 11
Group 1
The 526018 uses RF energy only for
its internal function. Therefore, its RF
emissions are very low and are not likely
to cause any interference in nearby
electronic equipment.
RF emission
CISPR 11
Group B
Harmonic emissions
IEC 61000-3-2
Not applicable
Voltage fluctuations/
flicker emissions IEC
61000-3-3
Not applicable
IPX-0
WARNING: No modification of this equipment is allowed
16
Risk management in the application of medical devices
The 526018 is suitable for use in all
establishments other than domestic and
those directly connected to the public
low-voltage power supply network that
supplies buildings used for domestic
purposes.
17
SPECIFICATIONS
SPECIFICATIONS
Table 4 Guidance and manufacture’s declaration – electromagnetic immunity –
for ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING
N
N
pr
pe
Guidance and manufacture’s declaration – electromagnetic immunity
Table 2
Table
4 is intended for use in the electromagnetic environment specified below.
The TMB-1018
The customer
or the user
should assure
that it is used
in such
Guidance
and manufacture’s
declaration
– electromagnetic
immunity
– for an
MEenvironment.
EQUIPMENT and
Guidance and manufacture’s declaration – electromagnetic immunity - for all ME EQUIPMENT and ME SYSTEMS
ME SYSTEMS that are
LIFE-SUPPORTING
Compliance
IECnot
60601
Immunity test
Compliance level
Electromagnetic
environment - guidance
Electrostatic
discharge (ESD) IEC
601000-4-2
±6 kV contact
±8 kV air
±6 kV contact
±8 kV air
Floors should be wood,
concrete or ceramic tile. If
floor are covered with
synthetic material, the
relative humidity should be
at least 30%.
Electrical fast
transient/burst IEC
61000-4-4
±2 kV for power supply
lines
±2 kV for power supply
lines
Mains power quality should be
that of a typical commercial or
hospital environment.
Surge IEC 6000-4-5
±1 kV line(s) to line(s)
±1 kV differential mode
Mains power quality should be
that of a typical commercial or
hospital environment.
<5% UT (>95% dip in UT)
for 0.5 cycle
<5% UT (>95% dip in UT)
for 0.5 cycle
40% UT (>60% dip in UT)
for 5 cycles
40% UT (>60% dip in UT)
for 5 cycles
70% UT (>30% dip in UT)
for 25 cycle
70% UT (>30% dip in UT)
for 25 cycle
5% UT (>95% dip in UT)
for 5 seconds
5% UT (>95% dip in UT)
for 5 seconds
Voltage dips, short
interruptions, and
voltage variations on
power supply input
lines IEC 61000-4-11
Power frequency
(50Hz)
magnetic field IEC
61000-4-8
3A/m
3A/m
Electromagnetic environment guidance
a
Guidance and manufacture’s declaration – electromagnetic immunity
The 526018 is intended for use in the electromagnetic environment specified below. The customer or the user of
526018 should assure that it is used in such an environment.
IEC 60601 test level
level
Portable and mobile RF communications
equipment should be used no closer to
The 526018 is intended for use in the electromagnetic environment
specified
below.
any part
of the
YS-6100, including
The customer or the user should assure that it is used in such
an environment.
cables,
than the recommended
IEC 60601
Complianceseparation distance calculated from the
Immunity test
Electromagnetic environment - guidance
equation applicable to the frequency of
test level
level
the transmitter.
Portable and mobile RF communications
Portable equipment
and mobile
communications
shouldRF
be used
no closer to any
equipment
be used
no closer
to the
partshould
of the YS-6100,
including
cables, than
any part recommended
of the including
cables,
than
the
separation
distance
calculated
3 Vrms
Conducted RF 3 Vrms
from the equation
applicable
to the frequency
recommended
separation
distance
IEC 61000-4-6 150 kHz to
of the
transmitter.
calculated
from
the equation applicable
80 MHz
to the frequency of the transmitter.
Portable and mobile RF communications
Recommended
separation distance
equipment should be used no closer to any
d = 1.167part of the including cables, than the recom3 Vrms
Conducted RF
3 Vrms
d = 1.167mended separation
80 MHzdistance
to 800calculated
MHz from
IEC 61000-4-6
150 kHz to
the equation applicable to the frequency of the
Radiated
RF
3 V/m 80
MHz 3 V/m
d = 2.333transmitter.
800 MHz to 2.5 GHz
80 MHz
IEC 61000-4-3 to 2.5 GHz
Guidance and manufacture’s declaration – electromagnetic immunity
Immunity Test
test level
Mains power quality should be
that of a typical commercial
or hospital environment. If the
user of the 526018 requires
continued operation during
power mains interruptions,
it is recommended that the
526018 be powered from an
uninterruptible power supply or
a battery.
Radiated RF
IEC 61000-4-3
3 V/m 80 MHz
to 2.5 GHz
3 V/m
b
separation
distance
where P Recommended
is the maximum
output power
= 1.167√Ρ
rating of dthe
transmitter in watts (W)
d =to1.167√Ρ
80 MHz to 800 MHz
according
the transmitter
d = 2.333√Ρ 800 MHz to 2.5 GHz
manufacturer and d is the recommended
where P is the maximum output power rating
separation
distance
of the
transmitterinin metres
watts (W) (m).
according to the
transmitter manufacturer and d is the recom-
Field strengths
from fixed
RF in metres (m).
mended separation
distance
transmitters, as determined by an
Field strengths
fixed RF
transmitters,
electromagnetic
sitefrom
survey,
a should
be as
by an electromagnetic
site survey,a
less thandetermined
the compliance
level in each
should be less than the compliance level in
frequency range.
Power frequency magnetic
fields should be at levels characteristic of a typical location in
a typical commercial or hospital
environment.
each frequency range.
Interference
may occur
in inthe
Interference
may occur
thevicinity
vicinity of of
equipequipment
marked
with
following
ment
marked with
thethe
following
symbol:
symbol:
NOTE UT is the a.c. mains voltage prior to application of the test level.
20
18
19
WARRANTY INFORMATION
SPECIFICATIONS
NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption
and reflection from structures, objects and people.
a Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land
mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with
accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey
should be considered. If the measured field strength in the location in which the ELE007839V1 is used exceeds
the applicable RF compliance level above, the ELE007839V1 should be observed to verify normal operation. If
abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating the
ELE007839V1.
b Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
♥ Warranty & Registration Information
Your Hopkins® Digital BP comes with a 3 year limited warranty. This BP monitor is
warranted against any defects in material and workmanship for 3 years from the
date of purchase. If you experience a material or manufacturing defect at any time,
repairs will be made without charge upon the return of the instrument to Hopkins
Medical Products, except in cases of obvious abuse or accidental damage.
*NOTE* If your BP monitor will be stored for an extended period of time, please
remove the batteries in order to avoid corrosion. Battery corrosion is not covered
under your 3 year limited warranty.
Table 6
Recommended separation distances between portable and mobile RF communications equipment and
the EQUIPMENT or SYSTEM – for ME EQUIPMENT or ME SYSTEM that are not LIFE-SUPPORTING
Recommended separation distances between portable and mobile RF communications equipment and the
ELE007839V1 Fitness Equipment.
The 526018 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
The customer or the user of the 526018 can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the 526018 as recommended
below, according to the maximum output power of the communications equipment.
Rated maximum
output power of
transmitter
W
To register your new Hopkins® Digital BP for
its warranty with Hopkins Medical Products,
please visit www.hmponline.com/registration
or scan this QR code with your smartphone and
complete the registration process.
(Reorder #526018)
Separation distance according to frequency of transmitter
m
150 kHz to 80MHz
d = 1.167 √Ρ
80MHz to 800 MHz
d = 1.167 √Ρ
800 MHz to 2,5 GHz
d = 2.333 √Ρ
0,01
0.167
0.167
0.233
0,1
0.369
0.369
0.738
1
1.167
1.167
2.333
10
3.690
3.690
7.388
100
11.67
11.67
23.330
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum
output power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
♥ Contact Information
For more information about our products, please visit our website:
www.hmponline.com
For customer service, please call us at 1-800-835-1995 M-F 8:30 AM - 5 PM EST
Hopkins Medical Products
5 Greenwood Place, Baltimore, MD 21208
20
21
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement