71235 Chaff Spreader Pump Kit

71235 Chaff Spreader Pump Kit
71235 Chaff Spreader Pump Kit
9970 Self-Propelled
Peanut Combine
9570 Engine Platform
December 2011
MAN122
©2011
Updated July 2012
You can find us on the Web at:
www.amadas.com
or e-mail us at:
[email protected]
You can also contact us at:
P.O. Box 1833 / Suffolk, VA 23439
(mailing)
1100 Holland Road / Suffolk, VA 23434
(shipping)
(757) 539-0231 (phone)
(757) 934-3264 (FAX)
P.O. Box 3687 / Albany, GA 31701
(mailing)
1701 South Slappey Blvd. / Albany, GA 31706
(shipping)
(229) 439-2217 (phone)
(229) 439-9343 (FAX)
71235 Chaff Spreader Pump Kit
Introduction
Table of
Contents
Welcome .................................................... ii
Parts List ............................................... iv
1 Safety ..................................................... 1
Overview ................................................ 2
Safety Symbols Used ........................ 2
Protective Devices ............................ 2
Safety Symbols ...................................... 3
Safety Alert Symbol ........................... 3
Safety Instructions ............................. 3
Note ................................................... 3
2 Installation and Operation ................... 5
Before Installing ..................................... 6
Installation .............................................. 7
Install Pump ...................................... 7
Install Valves ................................... 10
Install Hydraulic Lines ..................... 13
Install Harness ................................ 16
Install Cover .................................... 17
Operation ............................................. 18
Troubleshooting .................................. 19
3 Parts Catalog ...................................... 21
MAN122
7/26/2012
i
Introduction
Welcome
To AMADAS
Industries
71235 Chaff Spreader Pump Kit
With origins dating back to 1963, AMADAS
Industries and its predecessors have a long
history of providing high quality, reliable,
and innovative equipment for the farming
industry. AMADAS equipment is currently
at work throughout the United States and in
many other countries.
This equipment
ranges from the Magnum Fource Peanut
Combine, Tree Bark Processing and
Packaging Machinery, Hi-Speed Cotton
Stalk Puller/Chopper, Reel Rain Traveler
Irrigation Systems, to the 9970 SelfPropelled Peanut Combine.
Thank you for choosing AMADAS
Industries. We are strongly committed to
your satisfaction and safety. Our goal is for
you to be satisfied with our machinery for
many years and it is our hope that you will
choose AMADAS again for your equipment
needs.
One of the most important factors in both
safety and maximum performance is for
every machine operator to understand
thoroughly the safe operation of this
equipment. Please invest in the time to
read this manual to ensure that injuries are
prevented, and also to receive the
maximum productivity from your AMADAS
machine.
ii
7/26/2012
MAN122
71235 Chaff Spreader Pump Kit
Introduction
Chaff Spreader
Pump Kit 71235
for
9970
SP
Peanut Combine
Specifications
The chaff spreader pump kit consists of the
following:

A hydraulic pump, which is mounted on
the sheave

A directional control valve assembly with
relief which is mounted on the side of
the combine

All hydraulic hoses needed to add the
chaff spreaders

Electrical harness to tie wiring into main
harness

All fasteners, valves, and connectors
necessary to install kit.
7/26/2012
iii
Congratulations on your purchase of a chaff
spreader pump kit for your 9970 SelfPropelled Peanut Combine. Kit 71235 is
used with the 9570 engine platform and is
intended to simplify the installation of
aftermarket chaff spreader products. Note
that this kit does NOT include aftermarket
chaff spreaders; these need to be
purchased separately.
Benefits
This kit allows you to add aftermarket chaff
spreaders without impacting combine
performance. If installed properly according
to the directions in this manual, it eliminates
hydraulic and electrical installation issues
that have impacted the combine’s
performance due to improper installation of
aftermarket products.
MAN122
Introduction
71235 Chaff Spreader Pump Kit
Parts List
71235 Kit
Part Number
Description
16269
16320
16446
51856
129688
129689
129691
129703
129724
140488
140598
140867
140937
141008
141083
141084
141085
141086
141087
141097
141098
G102582
G11500193
G11500194
G128002
G180124
J38H1033
J38H1161
J38H1416
J61H1007
Hydraulic fitting, -12 ORB to 12 ORF M adapter
Hydraulic fitting, 4 ORF to -4 F 90 degree swivel
Harness, wiring; vine spreader
Sheave, machined
Mount, stabilizer
Hub, mount pump
Mount, engine
Cover, weldment
Mount, pump
Hydraulic fitting, -8 ORB x 8 ORF M run tee
Hydraulic fitting, -10 ORB x -8 ORF adapter
Hydraulic fitting, -16 ORF tee MMF swivel
Hose, 3/8 x 73
Hydraulic fitting, 16 – 10 ORF reducer MF
Valve, relief
Valve, directional; w/din connectors
Subplate, valve
Kit, bolt
Pump, 1.87
Hose, ¾ x 55
Hose, ½ x 67
Setscrew, 5/16-18 x ½ Allen cup
Lockwasher, M12
Screw, M12 x 80mm Hex Cap
Nut, 3/8-16 Serrated flange
Screw, 3/8-16 x 1 ¼ USS cap
Hydraulic fitting, swivel run tee 12-12-12
Hydraulic fitting, -8 ORF to -8 ORB M adapter
Hydraulic fitting, -8 ORF cap assembly
Hydraulic fitting, -12 ORB x -12 ORF M 90 deg. with O-rings
iv
Quantity
7/26/2012
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
2
6
6
1
3
3
1
MAN122
71235 Chaff Spreader Pump Kit
Safety
1 Safety
Overview ..................................................... 2
Safety Symbols Used .............................. 2
Protective Devices .................................. 2
Safety Symbols ........................................... 3
Safety Alert Symbol ................................ 3
Safety Instructions .................................. 3
Notes ....................................................... 3
MAN122
7/26/2012
1
Safety
71235 Chaff Spreader Pump Kit
Overview
Safety is everyone’s responsibility! Although
safety features are incorporated into the
machine and dangerous areas are marked.
Ultimately, careful operation is the best way to
prevent an accident. To reduce the risk of
accidents, please read thoroughly and follow
the safety instructions and messages included
in this manual and on the machine.
In addition to the information in this manual,
please read all safety information in Chapter 1,
Safety, of the Model 9970 Self-Propelled
Peanut Combine user manual before
beginning the installation process.
CAUTION
NEVER remove, tamper with, or modify
guards or shields!
NEVER open or take off the shields while
the machine is operating!
NEVER run the machine if the shields are
missing or removed!
CAUTION
Safety Symbols Used
Three safety symbols are used on the
machine and in this manual.
DANGER
WARNING
CAUTION
Please familiarize yourself with each
symbol and its meaning. It is crucial
to your safety, and the safety of
others, that you follow the safety
precautions indicated by these
symbols. The section beginning on
the next page explains each of these
symbols in detail.
Protective Devices
Protective guards and shields have been
installed to protect you from hazards.
2
Use extreme care when working with
hydraulic components.
Escaping fluid
under pressure can penetrate the skin,
causing serious injury. Avoid the hazard
by relieving pressure before disconnecting
hydraulic or other lines.
Tighten all
connections before applying pressure.
Search for leaks with a piece of cardboard.
Protect hands and body from high
pressure fluids.
If an accident occurs, see a doctor
immediately. Any fluid injected into the
skin must be surgically removed within a
few hours or gangrene may result.
Doctors unfamiliar with this type of injury
may call the Deere & Company Medical
Department in Moline, Illinois, or other
knowledgeable medical source.
7/26/2012
MAN122
71235 Chaff Spreader Pump Kit
Safety
Safety Symbols
Safety Alert Symbol
Safety Instructions
This symbol alerts you to possible hazards.
Follow the recommended precautions and
safe operating procedures. If you have any
questions, please contact your dealer or the
manufacturer.
Safety features have been designed into the
machine with hazardous areas marked.
Please read and follow the instructions in this
This symbol indicates an imminently manual prior to operating, maintaining, or
hazardous situation, which if not avoided, will servicing this machine.
result in death or serious injury. The use of the
word DANGER is limited to the most extreme
situations. Extreme care should be taken Notes
when you are near these areas. DANGER Throughout the manual, information that
decals are located at, or as near as possible needs to be emphasized is set apart with
to, these areas.
either a “NOTE!” OR “IMPORTANT!” heading.
Please be sure to carefully read this
information, as it usually indicates a situation
that could cause machine damage.
This symbol identifies areas or practices,
which if not avoided, could result in serious Example:
personal injury. These injuries could range
from
minor
cuts
to
dismemberment.
NOTE! Refer to the drawing on page 12
WARNING decals are located at, or as near as
to help you route hydraulic hoses.
possible to, these areas.
DANGER
WARNING
CAUTION
This symbol identifies a potentially hazardous
situation, which if not avoided, may result in
minor or moderate injury. It may also be used
to alert against unsafe practices that could
cause damage to the machine. CAUTION
decals are located at, or as near as possible,
to these areas.
MAN122
7/26/2012
3
Safety
71235 Chaff Spreader Pump Kit
NOTES
4
7/26/2012
MAN122
71235 Chaff Spreader Pump Kit
Installation and Operation
2 Installation
And Operation
Before Installing .......................................... 6
Installation .................................................. 7
Install Pump ............................................ 7
Install Valves ......................................... 10
Install Hydraulic Lines ........................... 13
Install Harness ...................................... 16
Install Cover .......................................... 17
Operation .................................................. 18
Troubleshooting ........................................ 19
MAN122
7/26/2012
5
Installation and Operation
71235 Chaff Spreader Pump Kit
Before Installing
CAUTION
Before you install the chaff spreader kit,
please read the following:
 Carefully read over the installation
instructions and familiarize yourself with
the installation procedure.
 Remove all packing materials.
 Carefully inspect the chaff spreader kit and
all associated parts and equipment.
 If there is any evidence of damage from
shipping or handling, report it immediately
to your AMADAS representative.
Use extreme care when working with
hydraulic components.
Escaping fluid
under pressure can penetrate the skin,
causing serious injury. Avoid the hazard
by relieving pressure before disconnecting
hydraulic or other lines.
Tighten all
connections before applying pressure.
Search for leaks with a piece of cardboard.
Protect hands and body from high
pressure fluids.
If an accident occurs, see a doctor
immediately. Any fluid injected into the
skin must be surgically removed within a
few hours or gangrene may result.
Doctors unfamiliar with this type of injury
may call the Deere & Company Medical
Department in Moline, Illinois, or other
knowledgeable medical source.
6
7/26/2012
MAN122
71235 Chaff Spreader Pump Kit
Installation and Operation
Installation
Install Pump
2. Remove the outer sheave shown in photo.
DANGER
Before beginning installation:
1. Shut off the combine and remove the
ignition key.
2. Set parking brake.
NOTE! The cover and sheave removed
will not be re-used. Retain the fasteners
for the cover, as they will be used to install
the new cover included in the kit. Also
retain the nut and key for the sheave as
they will be needed when the new sheave
is installed.
3. Turn off battery disconnect (located in
the engine bay).
1. Remove sheave cover from right side
(facing front of combine).
Sheave cover
Remove outermost sheave (note that this
view is from standing beneath the sheave
and looking up and that the cover has not
been removed)
3. Install the machined sheave on the shaft,
using the original nut and key. This sheave
replaces the sheave removed in Step 2.
Part #
Description
G11500794M51856 Machined sheave
Remove
Machined
sheave
installed
MAN122
7/26/2012
7
Installation and Operation
71235 Chaff Spreader Pump Kit
Install Pump
4. Install the pump mount hub listed below on
the shaft using the fasteners indicated.
Make sure the key (supplied with the pump)
is correctly inserted in the shaft as you
install the pump mount hub and that the set
screws are installed.
Part #
129688
G11500744
G11500193
G102582
Description
Pump mount hub
M12 bolts x 80mm
Lockwasher, M12
metric
5/16 Set screws
Mount
pump hub
installed
Pump
mount and
pump
installed
Set screw
5. Install the pump mount and gear pump with
the fasteners indicated. Refer to photos for
proper installation.
Part #
G180149
29724
141087
8
Description
7/16 x 1½” bolts
Pump mount
Gear pump (Honor)
7/26/2012
MAN122
71235 Chaff Spreader Pump Kit
Installation and Operation
Install Pump
6. Install the stabilizer mount as shown in the
photos. Use the fasteners indicated.
Part #
G180124
129688
129691
Description
3 3/8 x 1 ¼” bolts
Stabilizer mount
Engine mount
Attach stabilizer
using fasteners
to engine gear
case flange.
Note that
pictures are
taken from the
top looking
down at the
engine.
Make sure
stabilizer
is inserted
in cutout
MAN122
7/26/2012
9
Installation and Operation
71235 Chaff Spreader Pump Kit
Install Valves
1. Locate the area shown in the photos to
install the valve subplate. It is under the
rear shield as shown in the photo.
3. After marking the location for the holes,
drill two 13/32” holes. Before drilling, make
sure the area behind the combine frame is
clear of any hoses or wiring.
4. Install the aluminum valve subplate in the
indicated area, using the fasteners below
and the holes drilled in Step 3.
Lift this shield
Part #
141086
141085
Description
Bolt kit
Aluminum
valve
subplate
Relief-valve installed
Valve subplate
installed in
correct location
Hydraulic directional
control valve installed
5. Install the hydraulic direct-control-valve as
shown in the photo above.
Use the
fasteners indicated below.
Part #
Install
valve
subplate in
this
location
141084
Description
Fasteners from bolt
kit
Hydraulic
directional control
valve
6. Install the relief valve as shown in the
photo above.
2. After the area shown has been located,
use the subplate as a template to mark
holes for drilling.
10
7/26/2012
Part #
141083
Description
Relief valve
MAN122
71235 Chaff Spreader Pump Kit
Installation and Operation
Install Valves
7. Install the following fittings in the “T” and “P”
ports as shown:
Part #
J38H1161
Description
Hydraulic fitting, 8
Orf x 8 Orb M
adapter (2)
8. Install the following fittings in the “A” and
“B” ports as in the photo. Note that part
#140488 is installed in the “A” port and
part #J38H1161 in the “B” port. (Also
refer to drawing on page 15.)
Fittings installed; note the T and P
markings on valve subplate
Part #
140488
J38H1161
Description
Hydraulic fitting, -8
ORB x 8 ORF M
run tee
Hydraulic fitting, 8
Orf x 8 Orb M
adapter (2)
T - return
to tank
Port A
Port B
P - pressure
from pump
MAN122
7/26/2012
11
Installation and Operation
71235 Chaff Spreader Pump Kit
Install Valves
10. Connect the hoses for the chaff spreader
9. If the chaff spreaders are not being
as shown in Diagram 2.
connected at this time, use the cap and
NOTE! Hoses shown in Diagram 2
hose below to close off the system as
for the chaff spreader are NOT
shown in Diagram 1.
included in this pump kit.
They
should be included with whatever
If the chaff spreaders are being connected
chaff spreader kit you purchase.
at this time, then the cap and hose below
are not needed.
Part #
J38H1416
16504
Description
Hydraulic fitting, 8
ORF
Cap
assembly
Hydraulic hose,
½ x 20
Diagram 1
Cap off
right side
Diagram 2
12
7/26/2012
MAN122
71235 Chaff Spreader Pump Kit
Installation and Operation
Install Hydraulic Lines
To aid in installation of the hydraulic hoses,
one of two methods should be used:


Hose,
#140937
Connect a vacuum pump to the hydraulic
tank.
OR
Drain hydraulic tank.
NOTE! Refer to the drawing on page 15 to
help you route hydraulic hoses.
1. Attach the following hoses and fittings as
shown in the photo to the gear pump.
Part #
140937
141097
Description
3/8 x 73 hose
3/4 x 55 hose
fittings
Hose,
#141098
3. Attach the ½ x 67 hose (part # 141098) to
the bottom fitting of the valve block as
shown in the photo above.
4. Route hose #141098 through the guide
shown in the photo.
Hose,
#141097
Hose,
#140937
5. Attach hose #141098 from the valve block
to the hydraulic tank as shown in the photo
2. Attach the 3/8x73 hose (part #140937) to
on the next page. Use the fittings
the valve block as shown in the photo.
described below.
Use the following fittings.
Part #
J38H1161
MAN122
Description
Hydraulic fitting, -8
Orf x 8 Orb M
Adapter
7/26/2012
Part #
140867
141008
Description
Hydraulic fitting, 16
orf sw run tee mmf
Hydraulic fitting,
16-12 reducer mf
orf
13
Installation and Operation
71235 Chaff Spreader Pump Kit
Install Hydraulic Lines
6. Attach hose #141097 from the pump to
the hydraulic tank as shown in the photo
and drawing on page 15. Use the fittings
described below.
Part #
J38H1033
Attach hose
#141097
Fitting
#J38H1033
Description
Hydraulic fitting, 12
orf swivel run tee
mmf
7. Once all connections have been made,
disconnect the vacuum pump (if used)
from the tank. If the tank was drained,
then refill the tank. Regardless of the
method, ensure the hydraulic tank is full to
the top of the sight glass.
Attach hose
#141098
Fitting
#140867
Fitting
#141008
8. Upon completion of the installation, run
the combine for a few minutes.
9. Stop combine and
Correct as needed.
check
for
leaks.
10. Top off hydraulic tank with oil.
14
7/26/2012
MAN122
71235 Chaff Spreader Pump Kit
Installation and Operation
140753 TEE
EXISTING
140913
A = TANK RETURN
OIL, PART # 140488
B = PRESSURE TO
HYDRAULIC MOTOR,
PART # J3841161
NOTE: BLOCK IS STAMPED
WITH LETTERS “T” and “P”
T = RETURN TO TANK
MAN122
P = PRESSURE FROM PUMP
7/26/2012
15
Installation and Operation
71235 Chaff Spreader Pump Kit
Install Harness
1. Plug the electrical harness (part #16446)
into the front of the hydraulic directional
control valve.
3. In the engine bay, disconnect the combine
harness connection indicated in the photo.
Disconnect
Plug in
harness
2. Route the harness up, attaching with ties 4. Connect the main plug of the chaff kit
harness into the left side of the connection
as shown in the photo.
you just separated.
5. Plug the pigtail portion of the chaff kit
harness into the right side of the
connection.
Attach main
portion of
chaff kit
harness to
this end
Tie here
Attach
pigtail to
this end
16
7/26/2012
MAN122
71235 Chaff Spreader Pump Kit
Installation and Operation
Install Cover
Install the cover (part #129703) over the gear
pump. Use the fasteners removed with the
original cover.
MAN122
7/26/2012
17
Installation and Operation
71235 Chaff Spreader Pump Kit
Operation

When properly installed with this kit,
aftermarket chaff spreaders run automatically 
with the separator engage function.
The
separator engage switch turns on the separator
and functions as follows:


Push up to turn ON; pull down to turn OFF.
Separator engage
This switch must be off to start the engine.
The separator should only be engaged at
low idle speed.
When the combine is run at high idle, the
separator should be disengaged after the
engine is brought down to mid idle.

When the separator engage switch is
turned off, the chaff spreaders also stop.

The only way to shut off the chaff
spreaders and still engage the separators
is to disconnect the wiring.
On
Off

The road transport disconnect switch must
be in field position to turn the separator
engage switch to ON (the indicator light
must be OFF).
Road
transport
disconnect
18
Indicator
light
7/26/2012
MAN122
71235 Chaff Spreader Pump Kit
Installation and Operation
Troubleshooting
5. If everything is correctly installed and the
chaff spreader still does not run with the
separator engage switch, turn the combine
ignition switch to the RUN position. The
accessories should be turned on but the
1. Start up the combine according to
engine not running.
instructions in your combine user manual.
6. Turn the separator engage switch to the
2. Turn on the separator engage switch, as
ON position.
described on the previous page.
7. Check to make sure there are 12 volts of
3. Check to make sure the chaff spreaders
power to the chaff relief valve assembly.
are functioning.
If the chaff spreaders do not function
automatically when the separators are
engaged:
4. If
yes,
everything
plumbed/installed. If no:
is
correctly
a. Turn off the combine.
b. Make sure all plumbing is installed as
indicated in this manual.
c. Make sure the electrical harness is
correctly installed.
CAUTION
Make sure engine is turned off and key
removed from ignition before checking
plumbing, connections, etc.
MAN122
7/26/2012
19
Installation and Operation
71235 Chaff Spreader Pump Kit
NOTES
20
7/26/2012
MAN122
71235 Chaff Spreader Pump Kit
Installation and Operation
3 Parts
Catalog
MAN122
7/26/2012
21
Installation and Operation
71235 Chaff Spreader Pump Kit
Kit 71235
22
7/26/2012
MAN122
71235 Chaff Spreader Pump Kit
MAN122
Installation and Operation
7/26/2012
23
Installation and Operation
71235 Chaff Spreader Pump Kit
NOTES
24
7/26/2012
MAN122
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement