User Manual (English)
Contents
Safety information..................................................................................……2
DVD player features………........................................................................…4
DVD Video Features..................................................................................5
Disc playback............................................................................................5
Controls..........................................................................................................6
Monitor Stowed View................................................................. ……….....6
Monitor Open View.....................................................................……….....7
Remote Control.......................................................................... ……….....8
Operations....................................................................................................10
Open the monitor....................................................................... ……….....10
Stow the monitor........................................................................ ……….....10
Handing disc...............................................................................…..…...... 10
Turn the player on......................................................................................11
Turn the player off......................................................................................11
Chang the image aspect ration..................................................................11
Adjust the display.......................................................................................11
Care and Maintenance................................................................... ...........12
Use the remote control..............................................................................12
Replace the battery in the remote control…..............................................13
Play...............................................................................................................14
Play DVD disc............................................................................ ……….....14
Play Audio CD disc.....................................................................……….....16
Play MP3 disc.............................................................................……….....16
Play USB storage.............................. ........................................ ……….....17
Play SD/MMC card ....................................................................……….....18
Installation and Wiring................................................................................19
What's in the box........................................................................……….....19
Before you begin........................................................................ ……….....19
Mounting and Wiring Precautions.............................................. ……….....20
Installation procedure.................................................................……….....21
Wiring diagram........................................................................... ……….....22
System Setup............................................................................... …........….23
Troubleshooting...............................................................................……….25
Specifications...............................................................................…........….26
.
.
1
Safety Information
v Thank you for buying the Roof Mount LCD Monitor with DVD player.
Please read this manual carefully before using the player in order to get
the most out of all the features and functions. Keep this manual in a safe
place, as it can be a valuable tool in helping you to understand all the
features and functions.
v Do not operate the unit in any way other than described within this manual.
Failure to follow the instructions within the manual will invalidate your
warranty.
v SAFETY FIRST! Do not install the display where it may (i) obstruct the
driver’s vision, (ii) impair the performance of any of the vehicle’s operating
systems or safety features, including airbags, or (iii) impair the driver’s
ability to safely operate the vehicle.
v When using the system, make sure you are firmly secured by your seat
belt to ensure you do not accidentally hit your head on the screen during
sudden braking or other incidents. If you are ever in an accident, injuries
can be more severe if the seat belt is not properly buckled.
v Do not attempt to install or service your display by yourself. Installation or
servicing of the display by persons without training and experience in
electronic equipment and automotive accessories may be dangerous and
could expose you to the risk of electric shock or other hazards.
v Be careful not to drain the car battery while using the unit with the car
engine stopped. To avoid draining the battery, it is suggested that the
vehicle engine always is running while using the unit.
v Do not disassemble or alter the unit in any way. Failure to do so can cause
damage to the unit and invalid the warranty.
v Never clean the surface of the screen with chemical solvent or corrosive
detergent, which may cause permanent damage to the TFT LCD screen.
v Avoid installing the unit wherever is under direct sunlight or near hot air
vent. Please note that the normal working temperature of the unit is
between -5℃ to +50℃. If the internal temperature of the vehicle is
extremely high, a short cooling down period is necessary before operating
the unit.
v If the temperature inside the car is very low and the monitor is used soon
after switching on the heater, moisture may form on the panel of the unit.
Turn off the unit immediately! Failure to do so may cause the internal
components to short. Allow the unit to rest for about one hour to allow the
condensation to disappear before continue operation.
v In extremely cold temperatures, the movement of the picture may be slow
and the picture may be dark. It is not a malfunction. The unit will work
normally once it reaches its operating temperature.
v Do not drop or hit the LCD panel with a hard object, as it may cause
2
v
v
v
v
v
permanent damage to the LCD panel. Should LCD panel break, avoid
touching glass and fluid. If do, please clean it with plenty of water and ask
for medical attention immediately.
Due to different car specifications, please kindly ensue that the display
monitor is properly located and not obstructing the air-conditioning vent.
Avoid inserting any foreign objects into the slot of the disc Player. Failure
to observe this may cause malfunction due to the precise mechanism of
this unit.
Protect your disc. When you leave the car, be sure to eject the disc from
this unit and store it separately away from direct sun light.
Heat and humidity may damage the disc and you may not be able to play it
again.
Use the supplied screws to fix the monitor Metal Mounting Plate.
3
DVD Player Features
This player is a Roof Mount 10.2" TFT-LCD Color Display with DVD player
that can be used as a stand-alone display, or can be integrated into a mobile
multimedia system. This player has the following features:


















10.2" TFT-LCD color minitor(16:9)
Roof Mounting Application
Pixel(dots):800RGB(W)x480(H)
Wide Viewing angle(up/down/left/right):45/55/65/65
NTSC and PAL Compatible
Adjustable Contrast / Brightness / Color / Tint / Volume
Manual Viewing Angle Adjustment
Vertical Angle Adjustable: up/down<1200
White LED Dome Light
Automotive Startup Protection
Built-in IR Transmitter
IR Remote Control
On Screen Display
2xAV Input
1xAV Output
Slot-in DVD mechanism
Support SD/MMC card and USB
Capability to read: DVD Format / DVD±R / DVD±RW / CD-DA / CD±RW /
MP3 / VCD / SVCD
Note:
Multi-session CDs and 320kbps WMA files can not be played on this
player.
4
DVD Video Features
This unit provides the following functions in addition to high image quality and
sound quality of DVD video:
Multi-sound Function
DVD audio can store up to 8 languages for one film. This allows for the
selection of language of ones preference.
Multi-angle Function
A DVD video that is filmed from multiple angle which allows you choosing to
view from different perspectives.
Subtitle Function
A DVD video can record subtitles for up to 32 languages to choose from.
Disc Playback
This DVD player can play the following formats.
l
l
l
l
l
DVD
12cm
CD Video
12cm
CD Audio
12cm
CD MP3
12cm
Playback of CDs with two recorded sessions (one audio and one data)
Multi-sound: DVD audio that supports up to eight languages per film
Subtitles: support up to 32 languages
The playback of MP3 music files stored on a CD-R/CD-RW disc
Region number assigned based on the sales area; region number is
indicated on the box as follows. Australia is region 4.
Ex. Australia is region 4.
5
Controls
Monitor Stowed View
1 2 3 4 5 6 7 8 9 10
11
12
13
14
15
16
Item
Name
1
Power
2
Menu
3
Source
4
▼ Decrease
5
▲ Increase
6
Fast reverse
7
Fast forward
Function or Control
Press to turn on or turn off the player
Opens the Display menu. Press again to
sequentially select each menu item.
Selects the video input source: AV IN1 , AV IN2
or DVD IN ; In DVD mode, press and hold to
switch the mode between SD/MMC and USB .
Decrease volume during playback ; In the
OSD menu , press to reduces a value.
Increase volume during playback ;In the OSD
menu mode , press to reduces a value.
Skips to the previous chapter on a DVD or
track on a CD; Press and hold to fast reverse
at 2x,4x,8x,16x, 32x and normal speeds.
Skips to the next chapter on a DVD or track on
a CD; Press and hold to fast forward at
2x,4x,8x,16x , 32x and normal speeds.
6
8
■ STOP
9
Play or Pause
10
Eject
Press once to stop playback .Press
button
to start playing at the last position ; Press this
button twice to fully stop playback . Press
button to start playing at the beginning of disc .
Plays or pauses the disc.
Press to eject the disc.
Configures the dome light: ON, OFF or door
activated. To manually turn the light on or off,
move this switch to the ON or OFF position. In
the door-activated position, the dome light
turns on and off when you open and close the
car door.
11
Dome light switch
12
Dome light
To illuminate in the car.
13
OPEN button
Press to lower the overhead monitor screen.
14
IR Window
Receives IR signals from the remote control or
sends IR signals to IR wireless headphone.
15
Disc slot
Insert the disc.
16
AV 1 IN socket
External equipment audio/video in socket.
17
SD/MMC card slot Insert the SD card or MMC card.
18
USB socket
Connect USB device.
Monitor Open View
7
Remote Control
11
Item
1
Name
POWER
2
SETUP
3
4
MUTE
5
0-9 Number key
6
Previous
7
8
AUDIO
Function or control
Press to turn on or turn off the player.
Press to access the setup menu to modify the
DVD player settings.
Press to turn the sound on or off.
Press to eject the disc.
Press to enter numbers directly, such as for
settings or track numbers.
Press to go to the previous chapter on DVD or
track on CD.
Press to play or pause the CD or DVD.
DVD: Press to change the audio language
during DVD playback. VCD/CD: Press to
change the audio channel (Left, Right and
stereo) during VCD and CD playback.
8
9
10
ARROW AND
ENTER
Fast reverse
11
12
RANDOM
A-B
13
SRC
14
RETURN
15
ANGLE
16
17
18
ZOOM
REPEAT
TITLE
19
Fast forward
20
SUBTITLE
21
MENU
22
VOL - / +
23
Next
24
■ Stop button
25
DISPLAY
26
GOTO
Press to navigate in a menu and change setting
values.
Press to fast reverse playback at 2x, 4x, 8x,16x
and 32x speeds.
Press to play chapters or tracks in random order.
Press to repeat playback from point A to point B.
Selects the video input source: AV IN1 , AV IN2
or DVD IN ; In DVD mode, press and hold to
switch the mode between SD/MMC and USB .
Press to return the main menu, press again to
return the last position of playback.
Press to select a different filming angle. This
feature only works if the DVD is recorded with
multiple angles.
Press to set the zoom for movie viewing.
Press to repeats the track or the entire disc.
Press to view the DVD disc’s title menu.
Press to fast forward playback at 2x, 4x, 8x,16x
and 32x speeds.
Press to select and turn on subtitles during
playback.
Press to view the DVD main menu .
Press and hold to display the Display Menu .
Press to decrease / increase the volume.
Press to go to the next chapter on DVD or track
on CD.
Press to stop playback, press
or [ENTER]
button to start playing at the last position;
Press ■ button twice to fully stop playback,
press
or [ENTER] button to start playing at
the beginning of DVD.
Press to display the playback information (such
as title, chapter, track and time).
Press to start playback at a selected chapter,
track or time.
9
Operation
Open the monitor
1. Press the monitor release button to lower the overhead monitor screen.
2. Gently swing the LCD down and adjust the angle for viewing.
120°
Caution
The LCD opens to a maximum angle of 120° degrees.
Do not attempt to open it further.
Stow the monitor
Gently push the back side of the display panel until it clicks into the overhead
housing.The monitor turns off automatically when you return it to the closed
position.
Note :
When closing the display panel , do not let cords or other items get
caught between the display and the overhead housing . Doing so
can seriously damage the screen.
For your safety, close the LCD panel when you are not using it.
Handing disc
l
l
l
l
l
To keep a disc clean, do not touch the play side
(non-label side).
Do not attach sticky notes to or put tape on a disc.
Keep discs away from direct sunlight and heat.
Store discs in a protective disc case.
To clean the disc , wipe the disc outwards
from the center with a clean cloth.
10
Turn the player on
1. Turn the ignition to either ACC or ON.
2. Press the power button on the player or the remote control. If no disc is in
the drive, it displays “NO DISC”.
3. To change input source, press SRC and alternate among A/V input source:
DVD-IN, AV IN1(first additional audio-video source) and AV IN2 (second
audio-video source). Additional AV source must be connected.
Note:
You cannot insert a DVD into the slot if you have selected
an alternate audio-video source (AV IN1 or AV IN2).
Turn the player off
To turn the power off, press the power button.
If a disc is playing when you turn the power off and back on again, the player
continues playback from where you stopped.
Note:
Once the player is turned off, you cannot eject a disc in the player.
Chang the image aspect ration
A common display setting to change is screen mode, which controls the
aspect ratio used to display images.
Adjust the display
1. Press the
button on the panel or press and hold the MENU button on
the remote control to display adjust menu (OSD).
2. In the OSD MENU , press the MENU button again to sequentially select
each menu item .
Contrast
Adjusts the differences between the light and dark areas of
the image
Brightness
Makes the whole image lighter or darker
Color
Adjusts color based on the color spectrum
Tint
Adjusts the intensity of the color when in NTSC mode (to play
11
Wide Screen
Selects the aspect ratio of the image wide ,normal .
Reset Returns all menu values to their default settings.
3. Press the left (<) or right (>) arrows on the remote control or press ▼ or
▲ button on the panel to change the values of selected options.
Care and Maintenance
Cleaning the monitor



Use a clean, soft, dry cloth to gently wipe dust and dirt from the screen.
Do not use benzene, thinner, car cleaner, or other cleaners. These
substances may damage the monitor system or cause the paint to peel.
The surface of the LCD can be easily scratched. Do not rub it with
anything abrasive.
Servicing the monitor
In the event that trouble arises, never open the monitor case, disassemble the
player or attempt to repair it yourself. The internal parts are not serviceable by
user. Opening any components will void the warranty.
CAUTION:
Changes or modifications to this product not approved by the
manufacturer may void the warranty.
Cleaning the remote control
Use only a clean, soft, damp cloth to clean the remote control. Do not use
lighter fluid, methyl alcohol or other solvents.
Cleaning discs
Before playing a disc, wipe it outwards from the center with a clean, soft cloth.
Use the remote control




Use the remote control only inside the vehicle.
Use the remote control no further than five feet (three meters) from the
sensor.
Direct sunlight (or a very bright light) reduces sensitivity to remote signals.
Do not use the player in direct sunlight.
Any object than comes between the infrared sensor and the remote
control may disrupt reception.
12
Replace the battery in the remote control
The battery needs changing when the buttons on the remote stop working or
when you have to move close to player for the remote to work.
Precautions
l
l
l
l
Dispose of used batteries property.
Do not dispose of used batteries throwing them into fire. If you do so, they
may explode.
Do not short the positive (+) and negative (-) terminals.
Keep the battery and its holder away from young children.They may
choke on the battery while attempting to swallow or chew on it.
Procedure
Note:
The battery type must be CR2025. Do not replace with
any other battery type.
1. Turn the remote up-side-down.
2. Simultaneously slide the battery latch in the direction of the arrow and pull
the battery holder out of the slot.
Removing the battery holder
Battery with the plus side up
3. Remove the old battery.
4. Place the new battery in the slot with the plus(+) side up.
5. Push the battery holder back into the slot until it locks in place.
Inserting the holder with the battery into the remote control
13
Play
1. On DVD mode , insert a disc into the disc slot when the screen display " NO
DISC ". When the disc was inserted , “LOADING” displayed , the system
will read and play the disc automatically .
2. Press the button on the remote control or on the panel to eject the disc.
3. If the disc have not been take away in 10 seconds , the system will slot it in
automatically and play again.
Play DVD disc
Access the root menu
A DVD is divided into titles and chapters. The root menu shows the contents
of the disc. Some DVD disc only allow you to select disc playback options
from the DVD root menu.
To access the root menu of the DVD, press the RETURN or TITLE button on
the remote control during playback.
Status information
To view status information about the current viewing session, press the
DISPLAY button continuously to cycle through the following information.
TITLE ELAPSED
TT 02/06
CH 15/18
1:20:10
TITLE REMAIN
TT 02/06
CH 15/18
0:13:50
CHAPTER ELAPSED
TT 02/06
CH 15/18
0:02:20
CHAPTER REMAIN
TT 02/06
CH 15/18
0:01:10
Chang languages
Note:
All audible languages must be pre-recorded on the DVD. Some DVD disc
only allow language access through the DVD menu.
l
l
To change the audible language, press the AUDIO button on the remote
control. The player displays the current language number and name, and
the total number of languages available.
To cycle through all available languages, continue pressing the AUDIO
button on the remote control. The audio information will disappears
automatically after three seconds.
14
Use subtitles
Language subtitles are normally off.
Note:
Subtitles must be on the DVD. Some DVDs only allow subtitle
access through the DVD menu.
l
l
l
To turn subtitles on, press the SUBTITLE button.The player displays the
current language number and name, and the total number of languages for
which subtitles are available.
If the DVD provides subtitles in multiple languages, continue pressing the
SUBTITLE button to change the subtitle language.
To turn subtitles off, press the SUBTITLE button until the screen displays
"subtitle off ", The display of the subtitle options disappears automatically if
you wait for three seconds.
Repeat DVD chapters and titles
To repeat a chapter or title, during playback continue pressing REPEAT to
alternate among options.
• Chapter--- Repeats the current chapter.
• Title --- Repeats the current title.
• ALL--- Cycles play all chapters and titles
• Repeat off --- Resumes normal playback.
Repeat favorite sections
To repeat a favorite section you must first mark where it begins and ends.
1. Play back the DVD.
2. To identify the beginning of your favorite section (point A), press the A-B
button when the section starts playing back.
3. To identify the end of your favorite section (point B), press the A-B button
again when play back reaches the end of the section.
To cancel the repeat playback and resume normal playback, press the A-B
button again.
Chang viewing angle
Note:
Multiple angles must be pre-recorded on the DVD .
Look for the multiple angles icon (
) on the jacket of the DVD.
• To cycle through the available viewing angles, press the ANGLE button on
the remote while playing back the DVD . The player displays the current
angle number and the total number of angles available.
• To change the angle, press the ANGLE button again.
• To return to normal viewing, press the ANGLE button again.
15
Zoom in and out
• To zoom in (enlarge) the image when watching a DVD, press ZOOM during
playback.
As you press ZOOM on the remote, the player alternates among the
available zoom settings (2x, 3x, 4x, 1/2, 1/3, 1/4).
• To zoom in when viewing photographs (JPEG/JPG images) stored on a
disc , press ZOOM on the remote, the player alternates among the
available zoom settings: ZOOM 100%, ZOOM 125%, ZOOM 150%, ZOOM
200%, ZOOM 75%, ZOOM 50%.
Play Audio CD disc
Display CD information
To display the playing information , press DISPLAY button on the remote
control during CD palyback . Continue pressing DISPLAY button to view
SINGLE ELAPSED, SINGLE REMAIN, TOTAL ELAPSED, TOTAL REMAIN ,
DISPLAY OFF.
Repeat CD tracks
To repeat a track or the entire CD, press REPEAT button on the remote during
playback.
To cycle through the available options, continue pressing REPEAT.
• Track --- Repeat play the current music
• All ---Cycles play all music
• Repeat off ---Resume normal playback
Repeat favorite sections
To repeat a favorite section you must first mark where it begins and ends.
1. Play back the CD.
2. To identify the beginning of your favorite section (point A), press the A-B
button on the remote when the section starts playing back.
3. To identify the end of your favourite section (point B), press the A-B button
again when play back reaches the end of the section.
To cancel the repeat playback and resume normal playback, press the A-B
button again .
Play MP3 disc
MP3 is a format for storing digital audio, compresses each audio track with
little loss of audio quality. The result takes up much less disc space than the
track would without MP3 compression.
MP3 icons
16
This icon in front of an item identifies a folder.
This icon in front of an item identifies the item as an MP3 file.
Procedure
1. Insert a CD that contains MP3 files into the player .The player display the
MP3 menu .
2. To select the folders and tracks to play, press the ENTER button on the
remote control . The player displays the folder structure.
3. To choose a folder from the list, press the Λ / V button on the remote
control.
4. Press the ENTER button on the remote control . The player displays the
contents of the selected folder.
5. To select the MP3 file, press the Λ / V arrow button on the remote control.
6. To play the file, press the ENTER button on the remote control.
MP3 controls


To play back to the next MP3 file, press the next button ( ).
To play back the previous MP3 file, press the previous button (
).
Repeat MP3
To repeat a single MP3 file, press the REPEAT button on the remote. To cycle
through all the following settings , continue to press REPEAT.




Repeat one---repeats the current file.
Repeat folder---repeats the current the folder.
Repeat all---cycles play all current of the disc.
Repeat off---turns off repeat and resumes normal playback.
Play USB storage and SD/MMC card
Play USB storage
1. Inserting the USB storage into the USB socket of the main unit.
2. In DVD mode, press
button on the panel or press SRC button on the
remote control for more than 2 seconds to switch the USB mode . The
main unit will read the contents of USB storage automatically .
17
Play SD/MMC card
1. Inserting the SD card or MMC card into the SD/MMC slot of the main unit.
2. In DVD mode, press
button on the panel or press SRC button on the
remote control for more than 2 seconds to switch the card mode . The main
unit will read the contents of card automatically .
18
Installation and Wiring
Do not attempt to install or service your player by yourself. Installation and
servicing in electronic equipment and automotive accessories . If you do not
have knowledge or experience this installation may be dangerous and could
expose you to the risk of electric shock or other hazards.
Read these instructions and precautions carefully . Improper installation can
damage the monitor and the vehicle .
What's in the box
In addition to this manual , the box contains :
Name of parts
Quantity
Player
1
IR remote control with battery
1
Power cable
1
AV IN cable
1
ST4.2x16 screw
6
CM 4x8 screw
4
Metal mounting plate
1
User manual
1
Rubber gasket
1
Note :
Use only the contents of this package to install and use the system.
Using accessories not provided with this player may damage the player.
Before you begin
1. Verify that the vehicle electrical components function, including power
windows, power door locks, air conditioning, lights, etc.
2. Identify the polarity of the dome light circuit and set the switch on the
bottom of the overhead monitor housing.
3. Test fit the location of the overhead monitor system to ensure it will not
interfere with the operation of the vehicle.
4. If applicable, verify that the monitor, when mounted, will not interfere with
19
the operation of the sun roof.
5. Carefully mark the location with masking tape.
6. Lower the vehicle’s headliner down to see if a roof support beam is
available to screw the mounting bracket to.
If a support beam is not available, use a 3/4-inch piece of plywood cut to
the appropriate size. Attach the plywood to the roof of the vehicle using
silicone. Allow for adequate drying time.
7. Determine the location of any additional audio/video sources.
8. Disconnect the negative battery terminal before making any wiring
connections.
Caution :
Do not open the case . There are no serviceable parts inside . If you
drop anything into the unit during installation , consult with your OZON
Dealer or an authorized OZON service center .
Mounting and Wiring precautions
l
l
l
l
l
l
l
l
l
This unit is exclusively for vehicles with a negative ground, 12V power
supply.
This unit may be installed with additional mobile audio components, such
as a digital camera.
Always use great care when attaching anything to a vehicle. Check
clearances on both sides of the planned installation before drilling any
holes or installing any screws.
A good chassis ground connection is critical to minimize resistance and
avoid noise problems. Use the shortest wire possible and securely
connect it to the car chassis.
When routing RCA cables, keep them away from the power cables and
output speaker wires, engine, exhaust system, ect. Heat may damage
wires.
If the fuse should blow, make sure that all connections are correct, the
cables have not caused a short circuit, and no wires are damaged. Then
replace the fuse with a new fuse of the same amperage value as the
original fuse. When replacing a fuse, never let the power cable touch any
metal part or other wire.
Never let disconnected cables or terminals touch metal on the car or any
other conducting material.
To prevent short circuit, do not remove the caps from unused terminals or
from the ends of unconnected cables.
Insulate unconnected wires with vinyl tape or other similar material.
20
Warning!
To prevent short circuits during installation, disconnect the
vehicle’s negative battery lead before making any power connections.
Installation procedure
1. Disconnect and remove the original dome light
2. Screw the metal mounting plate to the beam or plywood using the six
ST4.2x16 screws.
Metal mounting plate showing screw positions
Note: Do not cover the original dome light opening.
3. Pull out the original dome light’s power wire and signal/power cable
through the original dome light opening.
4. Place the rubber gasket on the player.
5. Identify the dome light wires in the vehicle and connect them to the
corresponding dome light wire on the overhead monitor system
6. Plug in any audio/video source cables. Plug in the power harness into the
overhead monitor sysyem in the following order: ground wire, battery wire,
ACC wire and door wire.
Note:
Do not forget to connect the red ACC wire to the ignition switch.If you do
not connect this wire,the battery change may drain off prematurely.
7. Carefully hold the overhead monitor up to the metal mounting plate.
8. Screw in the four CM 4x8 screws making sure the wires are not in the way.
21
9. Reconnect the battery
10. Check the car’s brake lights, blinkers, wiper, etc. to ensure they are
working property.
Wiring diagram
Note : Slide the polarity switch to "-" if your vehicle's power supply system is
negative ; Slide the polarity switch to "+" if your vehicle's power supply
system is positive.
22
System Setup
1.
2.
3.
4.
5.
6.
7.
Press SETUP on the remote control to access the setup menu.
Press Λ / V button on the remote control to select among menu items.
Press < / > button on remote control to alternate set items.
Press Λ / V button to select the option you wish to change.
Press ENTER to confirm your selection.
Press < to return the previous grade menu.
Press SETUP to exit the setup menu.
Menu
Description
TV DISPLAY:modifies the display if it does not match
the width to height ratio the DVD uses.
·NORMAL/PS ·NORMAL/LB
·WIDE
ANGLE MARK: Selects a different angle if the back of
the DVD jacket contains a multiple angles icon.
·ON
·OFF
OSD LANG: Selects a language for DVD play menu.
GENERAL SETUP
·ENGLISH ·FRENCH ·SPANISH ·ITALIAN
PAGE
CAPTIONS: Selects the caption for DVD play.
·ON
·OFF
SCREEN SAVER: Protects the screen if it paused about
5 minutes.
·ON
·OFF
LOGO TYPE:Selects different start LOGO picture.
·DEFAULT ·CAPTURED
DOWNMIX: Applies to Dolby digital sound.
·LT/RT ·STEREO
SPEAKER SETUP DUAL MONO:Selects the different channels of sound.
·STEREO ·L-MONO ·L-MONO ·MIX-MONO
PAGE
DYNAMIC:Selects the different rating level of dB.
·FULL ·3/4 ·1/2 ·1/4 ·OFF
TV TYPE: Selects the TV system .
·PAL
·AUTO
·NTSC
AUDIO: Selects the audio track language.
· ENGLISH · FRENCH · SPANISH · GERMAN
·CHINESE ·RUSSIAN ·ITALIAN
PREFERENCE
SUBTITLE: Selects the language of the subtitles
PAGE
displayed on the screen.
· ENGLISH · FRENCH · SPANISH · GERMAN
·CHINESE ·RUSSIAN ·ITALIAN ·OFF
23
DISC MENU: Selects the language of the current disc.
· ENGLISH · FRENCH · SPANISH · GERMAN
·CHINESE ·RUSSIAN ·ITALIAN
PARENTAL: Restricts the viewing of movies to children
of appropriate age levels only. You can select 1 to 8.
1 KID SAF (safe for children)
2 G (general audience)
3 PG (parental guidance suggested)
4 PG 13 (some material unsuitable for children under 13)
5 PGR (some material unsuitable for children under 17)
6 R (some material unsuitable for under 17)
7 NC 17 (not recommended viewing for children under 17)
8 ADULT (Only for adults due to graphic content.This is the
default setting . )
After you select the parental setting, press ENTER, then
enter the 4-digit password (default is 3308). Press ENTER
again to confirm.
PASSWORD: Lets you change the 4-digit password
using the number keys on the remote control. The
default password is 3308, but no longer works after you
change the password.
DEFAULT: Resets all settings to the factory defaults.
Note: After you input some pictures to the player as LOGO picture, select
Captured in LOGO TYPE menu, then you can use SUBTITLE key on the
remote control to change the start LOGO picture one by one. Select Default in
LOGO TYPE menu to recover the default start LOGO picture.
24
Troubleshooting
If operation freezes, the screen goes black or the unit should otherwise not
function properly, try turning the unit on and off. If the unit does not respond,
press the reset switch on the Front Panel.
Problem
Cause
Solution
Disc inserted incorrectly
Player does not
Disc format is not
play disc
supported
Reinsert the disc with the label
side up (facing the ceiling).
Check the disc format.
Disc is dirty or scratched
The player
suddenly stoppPlayer error
ed working or
the screen went
black
The car ignition (or
ACC/Accessory) is off
Player doesn’t
turn on
Condensation in the player
Clean or replace the disc.
Try turning the player off and on.
If the player still doesn’t
respond, press the reset button.
Insert the key into the ignition
and turn it to ACC/Accessory.
Wait for about one hour or until
condensation evaporates.
Battery needs replacing
Player operates Dirty IR window on the
Player or remote control
erratically
Loose connections
Replace the battery.
Clean the player’s and the
remote control’s IR windows.
Check and tighten all
connections.
Picture Skips
Occasions
Clean or replace the disc .
Blur picture on
the screen.
The picture on
the screen is
dark.
Disc is dirty or scratched
Interfered by shortdistanced strong
interference.
(E.g. high voltage wire,
transformation station or
aircraft etc…)
1. The equipment locates
at a low temperature
area.
2. Brightness is set too
low.
25
Move the vehicle away from
the interference.
1. This is the characteristics of
LCD display in low temperature,
it will restore to normal
brightness after starting the
display for few minutes.
2.Adjust the brightness setting.
Specifications
Specifications and design are subject to change with out notice.
Power Source
Vehicle battery (DC +10V ~ +16V)
Operating Voltage
DC +14V
Mechanism
Manual Open / Close
Display Angle
Vertical Adjustable: Up/Down < 120°
Pixel
800RGB(W)x480(H)
Viewing angle(up/down/left/right) 45/55/65/65
Operating current
<2000mA(Typical VDD=14V)
Dome Light
<2W
Operation Temperature
-5℃ to +50℃
Storage Temperature
-20°C to +70°C
26
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement