HVAC Catalogue 2015/2016
HVAC & IAQ
CATALOGUE
TECHNICAL CATALOGUE 28
“The Edge of the World”
kenelec.com.au
1300 73 22 33
Welcome to The Edge of The World,
Arthur River. Here the gales of the
Roaring Forties meet the rugged
coastline at a place so aweinspiring that early poet Brian Inder
dubbed it “The Edge of the World”.
The sea west of Tasmania is the
longest uninterrupted expanse of
ocean on the globe. From Argentina
the currents sweep unimpeded
more than halfway around the
planet until they hit this point. It is
believed that the purest air can be
found here. As penned by Brian
Inder, “I cast my pebble onto the
shore of Eternity…It has shape,
form and substance”.
Elemental Collision
(Front Cover Image)
The Tarkine coast is wild remote and
inspiring, it is also life giving. A place
where the cleanest air on earth comes
together with one of the world’s oldest
cultures, an ancient landscape of
breathtaking raw beauty. A place where
animal and plant life flourish despite the
harshest of environments.
Photo by Dan Broun
The Kenelec Scientific Team is
made up of a very special group
of people united to deliver only the
best for our customers. We listen
and we partner with our customers
to produce the best solution
tailored to their specific needs and
preferences.
Some of our major international
suppliers have been trading with us
for many years in instrumentation
that is world renowned, reliable
and of impeccable quality. These
suppliers are constantly re-inventing
and improving their technology
so that you, our customer, can
enjoy the benefits of the latest
instrumentation as you will see our
latest catalogue attests to.
There was a realisation that conserving
places such as Arthur River is
important for future generations
and the need to understand the
environment became more and more
vital. Since Kenelec Scientific Pty Ltd’s
inauguration in 1962, it has grown
in recognising how important it has
become in providing solutions for
environmental monitoring. Over time
Kenelec Scientific has established
itself as a solution provider for
scientific instrumentation in areas of
Occupational Health and Safety, Water
Monitoring, Environmental Monitoring,
Heating Ventilation Air Conditioning,
Indoor Air Quality, Pharmaceutical and
Cleanroom Systems.
We are also capable of installing
bespoke monitoring solutions
where leading Pharmaceutical,
Research and Medical institutions
throughout Australia can testify to.
Our skilled calibration engineers will
assist in ensuring that you will enjoy
continued reliability with minimum
disruption to your businesses.
As you browse through our
catalogue, you will find that our
range of products is wide as is our
vast experience. Please feel free
to call us for further information
or assistance. We look forward to
hearing from you.
The core values we maintain here
are based on our slogan which is
“Measuring Up”. We measure up
to the excellence that exceeds
customers’ expectations from the first
contact to after sales support. Our
aim is to build long term relationships
and ultimately be a valuable ally for
our customers. We pride ourselves
in providing solutions which are
underpinned by a Quality Management
System that complies fully with ISO
9001:2008.
Anthony Busuttil
Solutions to challenges
Occupational
Health & Safety
Solutions
Water
Monitoring
Solutions
Managing Director
Environmental
Monitoring
Solutions
Pharmabilities
& Cleanroom
Solutions
PHARMABILITIES
EXCELLENCE IN
ENVIROMENTAL
MONITORING
MONITOR THE BUGS
ENTERING YOUR
CLEANROOM
e
e
- Knowledg
OH&S
CATALOGUE
TECHNICAL CATALOGUE 27
WATER
CATALOGUE
TECHNICAL CATALOGUE 26
Heating Ventilation
Air-Conditioning &
Indoor Air Quality
Solutions
- Experienc
- Complete
- Quality
- Services
HVAC & IAQ
CATALOGUE
TECHNICAL CATALOGUE 29
“The Edge of the World”
Solutions
ENVIRONMENTAL
MONITORING
CATALOGUE
TECHNICAL CATALOGUE 25
Keep the
kenelec.com.au
1300 73 22 33
kenelec.com.au
1300 73 22 33
Cleanroom
clean with
onmental
able Envir
an afford
Monitoring
Solution
kenelec.com.au
1300 73 22 33
Since 1972
from
kenelec.com.au
1300 73 22 33
www.kenelec.com.au
National Freecall No
1300 73 22 33
[email protected]
kenelec.com.au
HVAC & IAQ
CATALOGUE
VENTILATION TEST INSTRUMENTS
4
Hotwire Anemometers
Vane Anemometers
Digital Manometers & Pitot Tubes
Air Balancing Hoods
Duct Leakage Testers
Liquid Manometers
Relative Humidity & Temperature
Digital Photometers
Aerosol Generators
4
5
8
9
12
13
14
15
15
HEPA FILTER TESTING
15
INDOOR AIR QUALITY
16
CO2 & Multi-function IAQ Meters
Air Sampling - Pumps, Filter Cassettes & Sampling Media
Mould & Microbial Sampling
INDUSTRIAL TRANSMITTERS
16
20
24
26
Air Velocity Transducers
Relative Humidity and Temperature Transmitters / Data Loggers
CO2 Transmitters
Pressura Room Pressure Monitors
Refrigerant Transmitters
Industrial Gas Transmitters
MASS FLOW METERS (AIR & GAS)
26
26
28
29
30
31
33
Mass Flow Meters
Primary Calibrators
Please note: the prices in this catalogue are provided as a guide only and are subject to change
without notice. Delivery cost and GST are not included.
33
34
FS 605267
VENTILATION TEST INSTRUMENTS
HOTWIRE ANEMOMETERS
INDUSTRY STANDARD TSI HOTWIRE ANEMOMETER
• TSI is the world’s largest and leading
manufacturer of hotwire anemometers
• Both Alnor and Airflow brands are owned
by TSI Incorporated with a wide range of
instruments sold in Australia by Kenelec
Scientific and our agent network
• Kenelec Scientific has exclusively represented
TSI for over 40 years in Australia
• We have the only TSI equipped, authorized
and certified, service and calibration facilities
in Australasia to professionally calibrate and
adjust TSI instruments. Having equipment
properly calibrated, using Kenelec Scientific
as an approved and certified vendor, can
potentially protect your company in the event
of disputes and litigation.
• TSI equipment is well known, respected
and widely used by researchers, regulatory
bodies, health authorities, councils, mining
companies, the EPA, ventilation engineers,
HVAC companies and countless other
organizations worldwide.
• FREE lifetime support, FREE lifetime software
updates, specialist advice, extended
warranties, rental options, calibration services,
special client discounts, education and
training.
These are just some of the structures that
Kenelec Scientific has put in place to support
the thousands of TSI customers throughout
Australasia.
TSI’S SOFTWARE
PACKAGES
DO YOU PREFER THE AIRFLOW
OR ALNOR BRAND?
TSI LOGDAT
Keep in mind that Airflow, Alnor and TSI are part of the same company. They have many
parallel products that are exactly the same in function and price – they just have different
branding! Kenelec will happily supply whichever brand you prefer.
TSI 9515 / AIRFLOW TA410 ENTRY LEVEL
ANEMOMETER
TSI 9535 / AIRFLOW TA430 MULTI-MODE
ANEMOMETER
936
Provided FREE
with most TSI 9
series and Airflow
TA series thermal
anemometers
TSI 9545 / AIRFLOW TA440 MULTI-MODE
ANEMOMETER
1,448
$
1,938
$
$
Parameter
Range
Accuracy
Parameter
Range
Accuracy
Parameter
Range
Accuracy
Air Velocity (direct)
0 to 20m/s
+ / - 3%
Air Velocity (direct)
0 to 30m/s
+ / - 3%
Air Velocity (direct)
0 to 30m/s
+ / - 3%
Air Velocity (via pitot)
-
-
Air Velocity (via pitot)
-
-
Air Velocity (via pitot)
-
-
-10 to 60°C
+/- 0.3°C
Temperature
-18 to 93.3°C
+/- 0.3°C
Temperature
-18 to 93.3°C
+/- 0.3°C
Temperature
Humidity
-
-
Humidity
-
-
Humidity
0 to 95%
+ / - 3%
Dew Point
-
-
Dew Point
-
-
Dew Point
Calculated
N/A
Wet Bulb
-
-
Wet Bulb
-
-
Wet Bulb
Calculated
N/A
Differential Pressure
-
-
Differential Pressure
-
-
Differential Pressure
-
-
Static Pressure
-
-
Static Pressure
-
-
Static Pressure
-
-
Barometric Pressure
-
-
Barometric Pressure
-
-
Barometric Pressure
-
-
Volumetric Air Flow
-
-
Volumetric Air Flow
Calculated
N/A
Volumetric Air Flow
Calculated
N/A
Heat Flow
-
-
Heat Flow
-
-
Heat Flow
-
-
General Features
General Features
General Features
• Slow and fast response rate
• Menu driven display
• Complete with rugged, high impact case and
accessories
• Fully calibrated with a 2 year warranty
• 12,700 point manual data logging with
Windows based software included
• Standard model comes with a straight probe
• Statistics & variable time constant
• Auto save & on screen data review
• Fully calibrated with a 2 year warranty
• 12,700 point auto save & manual data
logging with Windows based software
included
• Standard model comes with a straight probe
• Auto save & on screen data review
• Statistics & variable time constant
• Fully calibrated with a 2 year warranty
Options
■■TSI9535A
• Includes Articulated Probe
4
kenelec.com.au
$1,682
Options
■■TSI9545A
• Includes Articulated Probe
$2,172
1300 73 22 33 / [email protected]
VENTILATION TEST INSTRUMENTS
VANE ANEMOMETERS
WHY BUY FROM KENELEC SCIENTIFIC?
Why use generic brands or old uncalibrated instruments when you can use what the
industry professionals use?
• We are the largest supplier of quality vane anemometers in Australasia
• We are accredited in the calibration of vane anemometers
• Both NATA calibration options are available
• All equipment is fully serviced and supported in Australia
• Full calibration adjustments are made, not just verifications like other labs
• TSI’s vane anemometers have been used worldwide as industry standard
measurement tools for over 30 years
• Kenelec Scientific is Australia’s exclusive importer of TSI products & only
authorized service centre
• FREE Lifetime technical support and software updates
DO YOU HAVE A
VANE ANEMOMETER
DUE FOR
CALIBRATION?
Here is your opportunity to have your
TSI instrument NATA calibrated
• 3 ranges to choose from
• NATA Calibration Certificate
300
$
TSI 5725 / AIRFLOW LCA501 PRECISION VANE ANEMOMETER
General Features
• Reversible 4 in. (100 mm) head to read supply
and exhaust flows
• Calculates volumetric flow rate when user
inputs duct shape and size, or area
• Sampling function records multiple point
measurements
• Automatic averaging of air velocity
• Simultaneously displays velocity and
temperature
• Sweep mode for one overall measurement
• Optional 36in. telescopic arm available
• Compatible with optional Aircone flow hoods
• Logs 12,700+ samples with a time and date
stamp
• Recall, review, store data
• LogDat2™ downloading software included
• Supplied with NIST traceable calibration
certificate
RENT
ME
■■TSI 801749 AIR CONE KIT
Accessories
■■TSI 801748
TELESCOPIC
EXTENSION ARM
■■TSI 801749 AIR CONE KIT
$351
• Includes a 285 x 234mm rectangular cone
• Includes a 180mm diameter round cone
• Works with any 100mm vane anemometer
• Rugged and reliable, easy to transport
• Ideal for toilet fans and small outlets
• Excludes the meter shown above
1,221
$
The VelociCalc® 5725 is a high performance,
yet simple to use, rotating vane anemometer.
High accuracy and reliability make the
VelociCalc 5725 the professional’s ideal
tool for measuring unevenly distributed or
fluctuating flows through heating and cooling
coils, grilles, and filters.
It accurately measures air velocity and
temperature, calculates flow rate, performs
averaging, and can determine minimum and
maximum readings. Using sweep mode, you
can quickly provide one averaged reading of
velocity or volume over a large measurement
area. The large vane head automatically
averages and dampens velocity and volume
readings. The VelociCalc 5725 includes
variable time constant, sampling and statistics
functions and data logging capability.
1300 73 22 33 / [email protected]
■■4M PROBE
EXTENSION
CABLE
■■AIRFLOW LCA301
VANE ANEMOMETER
$797
• 0.25 to 30m/s air velocity range
• 0 to 60°C temperature range
• Volumetric air flows, sweep mode,
100mm head
• Air cone flow hood kit compatible
• Includes soft carry bag and accessories
• Includes calibration certificate & 2 year
warranty
kenelec.com.au
■■TSI 801748 TELESCOPIC
EXTENSION ARM
$219
• Extends out 1m allowing the vane head to
sit around 1m plus over your head
• Great for reaching high, hard to get at places
• Compatible with TSI & Airflow brand
vane anemometers
• Rugged and reliable, easy to use
■■4M PROBE EXTENSION CABLE
$120
• The 4m extension cable is compatible with
most TSI and Airflow vane models
• The vane head can be screwed off and fitted
on any longer (self-made) pole with the 4m
cable then connecting the vane head back
to the instrument
5
VENTILATION TEST INSTRUMENTS
TSI 9565 / AIRFLOW TA465 ADVANCED ANEMOMETER
MULTIPLE
APPLICATION
- Ventilation
- Indoor Air
Quality
RENT
ME
Parameter
Range
Accuracy
Air Velocity (direct)
0 to 50m/s
±3%
Air Velocity (via pitot) 1.27 to 78m/s
±1.5%
Temperature
-18 to 93.3°C
±0.3°C
Humidity
0 to 95 %
±3%
Dew Point
Calculated
N/A
Wet Bulb
Calculated
N/A
Differential Pressure
±3735 Pa
±1Pa
Static Pressure
±28mm Hg
±1%
Barometric Pressure
517 to 930mm Hg ±2%
Volumetric Air Flow
Calculated
-
Heat Flow
Calculated
-
General Features
• Interchangeable probes
• Compatible with all pitot tubes on the market
• 26,500 point advanced data logging (manual &
automatic) with USB cable and software
• Toggle between actual and standard velocity
• Advanced menu driven multi-mode display
• Bluetooth bidirectional communications
• Remote polling from a PC
• Includes Model 964 probe for Velocity, Temp
& Humidity
Options
■■TSI 9565A
$3,525
• Includes Articulated Probe 966 for Velocity,
Temp & Humidity
■■TSI 9565P
• No Probe supplied, just the unit
$1,989
3,277
$
TSI 9565 model includes
the 964 probes
CARBON
MONOXIDE
Carbon monoxide, also known as
CO, is called the “Invisible Killer”
because it’s a colourless, odourless,
poisonous gas. More than 150 people
in the Unites States die every year
from accidental non-fire related CO
poisoning associated with consumer
products, including generators. Other
products include faulty, improperlyused or incorrectly-vented fuel-burning
appliances such as furnaces, stoves,
water heaters and fireplaces.
Source: United States Consumer Product
Safety Commission
6
kenelec.com.au
1300 73 22 33 / [email protected]
VENTILATION TEST INSTRUMENTS
VOC
The term “chemical emissions” refers to
VOCs as they evaporate into the air from
products.
Volatile organic compounds are chemicals
used to manufacture and maintain building
materials, interior furnishing, cleaning
products and personal care products.
“Volatile” means that these chemicals
evaporate or can easily get into the air at
room temperature. “Organic” means these
chemicals are carbon based.
Studies by the U.S. Environmental Protection
Agency (U.S.EPA) and other researchers
have found that VOCs are common in
indoor environments and that their levels
may be two to a thousand times higher than
outdoors. There may be anywhere from 50
to hundreds of individual VOCs in the indoor
INDOOR AIR QUALITY PROBES
PRECISION VOC PROBES
2,516
air at any one time. Some may produce
objectionable odours at very low levels, but
many have no noticeable smell. Many VOCs
are irritants and can cause headaches, eye,
nose and throat irritation and dizziness.
Long-term exposure to certain VOCs may
lead to chronic diseases or cancer. At high
concentrations, some VOCs are toxic.
Source: Greenguard Certification from UL
Environment
IAQ & VOC PROBES
3,496
FROM $
4,900
FROM $
FROM $
Options
Options
■■MODEL 980
$2,516
• Temp Humidity CO2
• 0.5°C temperature accuracy
• 0 to 5000ppm CO2 range
• 0 to 60°C temperature range
• Dew point & wet bulb measurements
• 5 to 95% humidity range, +/- 3% accuracy
■■MODEL 984
• 10 to 20,000 ppb range
• Resolution 10ppb, 0.1°C
• -10 to 60°C temperature range
• Temperature accuracy +/- 0.5°C
$4,659
■■MODEL 986 RENT ME
• VOC’s - 10 to 20,000 ppb range
• RH - 5 to 95% range
• Temperature -10 to 60°C
• CO2 - 0 to 5,000ppm range
$5,471
■■MODEL 985
• 1 to 2,000 ppm range
• Resolution 10ppm, 0.1°C
• -10 to 60°C temperature range
• Temperature accuracy +/- 0.5°C
$3,496
■■MODEL 987
• 1 to 2,000 ppm range
• RH - 5 to 95% range
• Temperature -10 to 60°C
• CO2 - 0 to 5,000ppm range
$4,900
RENT ME
■■MODEL 982
$2,984
• CO2 & CO Temperature Humidity
• 0 to 500ppm CO range
• 0 to 5000ppm CO2 range
• 0 to 60°C temperature range
• Dew point & wet bulb measurements
• 5 to 95% humidity range, +/- 3% accuracy
Options
800187 AIR FLOW PROBE
MODEL 995 100MM VANE HEAD
563
$
RENT
ME
856
$
General Features
General Features
• 1.27 to 78.7 m/s range
• Stainless steel construction
• Can be used in harsh environments
• Resolution 0.001m/s
• Up to 800° C temperature
• 0.25 to 30m/s velocity range
• 0 to 60°C temperature range
• Removable handle
• Can be mounted on a pole
UNIVERSAL HOTWIRE PROBES
TEMPERATURE PROBES
219
$
1,017
FROM $
General Features
Options
• -40 to 650°C temperature range
• Accuracy ± 0.056% of reading
• Rugged design
• Easy to plug-in and use
• 0.1°C resolution, 15cm long
RENT ME
■■MODEL 960
$1,017
• 0.015m/s accuracy, 0.01m/s resolution
• -18 to 93.3°C temperature range
• 0.3°C temperature accuracy
• 0 to 50m/s air velocity range
• Air volume measurements
RENT ME
■■MODEL 964
$1,331
• -10 to 60°C temperature range
• 5 to 95% humidity range, +/- 3% accuracy
• Dew point & wet bulb measurements
• 0 to 50m/s air velocity range
• Air volume measurements
■■MODEL 962
$1,258
• 0.015m/s accuracy, 0.01m/s resolution
• -18 to 93.3°C temperature range
• 0.3°C temperature accuracy
• Articulated probe
• 0 to 50m/s air velocity range
• Air volume measurements
■■MODEL 966
$1,565
• -10 to 60°C temperature range
• 5 to 95% humidity range, +/- 3% accuracy
• Dew point & wet bulb measurements
• Articulated Probe
• 0 to 50m/s air velocity range
• Air volume measurements
Options
■■MODEL 792 SURFACE PROBE
$219
■■MODEL 794 AIR PROBE
$219
1300 73 22 33 / [email protected]
kenelec.com.au
7
VENTILATION TEST INSTRUMENTS
DIGITAL MANOMETERS & PITOT TUBES
BUY FROM KENELEC SCIENTIFIC...
• Australia’s largest range of professional, quality units
• Solutions available from world renowned TSI and Airflow Instruments
• Industry standard solutions for industry professionals
• Low cost, inclined and vertical tube manometers
• Base models through to advanced multifunction instruments
• Measure a wide variety of parameters accurately and with confidence
• Calculate air velocity inm/s and air volume in l/s inside ducts
• Australia’s exclusive importer of TSI products & only authorized service centre
• The ideal calibration devices for checking room pressure differentials
• Compatible with all brands, makes and models of Pitot tubes
• All instruments include professional calibration certificates
• Fully serviced, supported, calibrated & adjusted in Australia as required
• Full calibration adjustments are made, not just verifications
TSI 5815 / AIRFLOW PVM610
DIGITAL MICRO MANOMETER
TSI 8715 ADVANCED / AIRFLOW PH730
MULTIFUNCTION MANOMETER
TSI 5825 / AIRFLOW PVM620
DIGITAL MICRO MANOMETER
812
1,251
$
2,618
$
$
General Features
General Features
General Features
• -3735 to + 3735 Pa differential pressure range
• Measures static and differential pressures
• Calculates air velocity through a Pitot tube
• Menu driven display with space age design
• High impact rugged case, easy to use
• Full 2 year warranty with FREE lifetime support
• -3735 to + 3735 Pa differential pressure range
• Measures static and differential pressures
• Calculates air velocity & air volume in l/s
• 10,700 point data logging with software
• Variable time constant & sample statistics
• Actual and standard velocity, 2 year warranty
• -3735 to + 3735 Pa differential pressure range
• 26,500 point data logging with software
• TSI air flow hood & velocity matrix compatible
• Optional plug-in environmental probes
available
• Bluetooth communications, menu driven
display
• Auto zero and many other advanced features
TSI STANDARD PITOT TUBE
TSI TELESCOPING PITOT TUBE
Options
219
FROM $
General Features
■■12 INCH / 30CM
$219
■■18 INCH / 46CM
$241
■■24 INCH / 61CM
$263
■■36 INCH / 91CM
$307
■■48 INCH / 122CM
$320
■■60 INCH / 152CM
$351
We also sell S Type and other ranges of
pitot tubes
General Features
• Extends out from 8 to 38 inches
• Ideal for use with precision manometers
• Long lasting 304 stainless steel construction
• 1/8 inch diameter
• Fully meets AMCA & ASHRAE specifications
• Moulded hand grip
• Fully portable, easy to use
• Ideal for use with precision manometers
• Long lasting 304 stainless steel construction
• Silver soldered connections
• Fully meets AMCA & ASHRAE specifications
• No correction factors or calibration required
• Insertion depth markings on the side
• Coefficient of “1”
8
453
$
kenelec.com.au
1300 73 22 33 / [email protected]
VENTILATION TEST INSTRUMENTS
AIR BALANCING HOODS
TSI 6200 LOW FLOW BALOMETER
2,311
FROM $
General Features
Options
Accessories
• 4.7 to 236 l/s flow rate
• K factor input capabilities
• 10 hour battery life with continuous use
• Operates on 4 x C size batteries
(with nicad battery option)
• ± 3% accuracy with 1.0 cfm display resolution
• Simulated analogue display shows air trends &
digital readings
• Use with or without a hood
• Weighs only 6.5 lb with 610 x 610mm hood
attached
• 2 year warranty
• Fully calibrated, serviced and supported
by Kenelec Scientific
■■TSI 6200
$2,348
• 406 x 406mm & 200mm tall fabric hood
The Alnor series of Low Flow air capture hoods
is the ideal way to measure very low volumetric
flows. Confidently and accurately measure
supply or return flows from 4.7 to 236 l/s.
1300 73 22 33 / [email protected]
■■TSI 6200D
$2,333
• 610 x 610mm & 457mm tall fabric hood
■■TSI 6200E
• No Hood
$2,311
■■TSI 6200F
$2,333
• 406 x 406mm & 457mm tall fabric hood
kenelec.com.au
This lightweight series of units is ideal for
either residential or light commercial use. Each
unit includes batteries, a carrying case, NIST
traceable calibration certificate, user manual
and two year warranty.
■■406 X 406MM FRAME &
FABRIC HOOD KIT, 200MM TALL
$358
■■406 X 406MM FRAME &
FABRIC HOOD KIT, 457MM TALL
$358
■■610 X 610MM FRAME &
FABRIC HOOD KIT
$358
■■650 X 650MM FRAME &
FABRIC HOOD KIT
$358
9
VENTILATION TEST INSTRUMENTS
AIR BALANCING HOODS
THE ULTIMATE INDUSTRY STANDARD HOOD FOR AIR BALANCING PROFESSIONALS
TSI 8380 / AIRFLOW PH731 MULTI-FUNCTION AIR BALANCING HOOD
Detachable
manometer
±3735 Pa
measurement
range
RENT
ME
4,630
$
Parameter
Range
Air Velocity
0.125 to 78 m/s velocity through pitot tube range with ±
2% accuracy
Air Volume
11 to 1180 l/s measurements
Temperature
-10 to 60°C temperature measurements (requires 800220
probe)
Humidity
0 to 95% RH range, ±3% accuracy (requires 800220
probe)
Dew Point
Calculates dew point (requires 800220 probe)
Wet Bulb
Calculates wet bulb (requires 800220 probe)
Differential Pressure
+/- 3735 Pascal differential pressure measurements
Static Pressure
Static pressure measurements
Barometric Pressure
Barometric pressure measurements
Data Logging
26,500 point data logging with software provided
General Features
Whether you are upgrading from an earlier TSI model or buying a hood
for first time, the TSI 8380 ACCUBALANCE is the ULTIMATE hood for the
air balancing professional. Reliable, accurate and packed full of features
far beyond other hoods on the market the 8380 is quite simply the most
advanced hood of its type.
The 8380 is a state-of-the-art multi-purpose electronic air balancing
hood for reading air volume flow at diffusers and grilles. It is ideally
suited for commissioning agents, facility Managers, health & safety
specialists, test engineers and test and balance professionals. This ultra
lightweight, ergonomically designed kit saves time and money while
helping to create a healthy and energy efficient environment.
Every TSI 8380 / Airflow PH731 comes with a 610 x 610mm standard
hood and frame kit, the manometer (meter), a luggage style wheeled
transit case, 18” pitot tube, 2 static tubes, 4.8m tubing, Swirl X
Conditioner, PC interface cable, software, neck straps, batteries, battery
holders, NIST traceable calibration certificate, manuals and a full 2 year
warranty.
• Detachable manometer, can be used on or off the hood for other
measurements
• Effectively 2 instruments for the price of one (manometer & hood in one)
• Advanced temperature & back pressure compensation
• Includes the latest SWIRL X flow conditioner for twist or swirl diffuser
work
• Bluetooth bi-directional communications & Bluetooth printing, 30m range
• USB interface, data downloading and full remote
polling for real-time data collection
• New built-in heat flow, turbulence and duct
traverse capabilities
10
• Multi-language capability
• Multimode data logging
• Backlit LCD display
• K-factor adjustments
• Auto density correction
• Precision auto zeroing
• 610 x 610mm hood included, others optional
• Ergonomic design and ultra lightweight for easy one person operation
• Detachable digital manometer for use in other applications with pitot, air
flow, temperature, velocity matrix, humidity & other probes
• Temperature & back pressure compensated
• Multiple hood sizes & accessories available
• Optional smartphone Android application
• 11 to 1180 l/s measurement range with ±3% of reading accuracy
• 0.125 to 25m/s range through external air flow probe
• 0.125 to 12.5m/s range through external velocity matrix with ±3% of
reading accuracy
• 356 to 1016 mm Hg absolute pressure range
• Measures differential pressure ±3735 Pa with 2% of reading accuracy
• 4.4 to 60°C internal temperature sensor range
• Can be used with any pitot or static tubes
• Full statistics, minimum, maximum & average
• Full 2 year warranty with FREE lifetime support
• FREE Lifetime software updates
• Calibrated in Australia by Kenelec Scientific
Note: Optional plug in probes may be required to make certain measurements on the TSI
8380 and PH731 model hoods.
kenelec.com.au
1300 73 22 33 / [email protected]
VENTILATION TEST INSTRUMENTS
ADDITIONAL MESSAGES
PRESSURE TOOL SELECTED
BATTERY INDICATOR
PRIMARY PARAMETER
SECONDARY PARAMETER
SAMPLES
MENU
MENU
ONE PERSON
OPERATION
PACKAGE
Purchase the 8380-STA bundle which includes
the following
• 8380 AccuBalance Capture Hood
• Capture Hood Stand
• Samsung 7” Tablet with 8GB, Wi-Fi and loaded with
LogDatTM Mobile App and Instruction Videos
$
5,237
excl. Delivery Fee + GST
Options
■■TSI 801090 16 POINT VELOCITY MATRIX
• 0.125 to 12.5 m/s flow range
• Includes telescopic handle and 8 feet of tubing
Accessories (Additional Hood Options)
$570
■■TSI 800187 AIR FLOW PROBE (18” STRAIGHT PITOT PROBE) $563
• 0.125 to 25 m/s measurement range
• Includes 2 x 2.4m hoses
■■TSI 800220 TEMPERATURE & HUMIDITY PROBE
• -10 to 60ºC & 5 to 95% humidity
• 0.3ºC temperature accuracy, +/- 3% RH accuracy
$527
Accessories (Thermo Anemometer Probes)
■■TSI 801200 305 X 1220MM HOOD & FRAME KIT
$512
■■TSI 801202 305 X 1525MM HOOD & FRAME KIT
$512
■■TSI 801201 610 X 1220MM HOOD & FRAME KIT $512
■■TSI 801203 915 X 915MM HOOD & FRAME KIT
$512
■■TSI 801209 406 X 406MM HOOD & FRAME KIT
$446
■■TSI 801210 133 X 1220MM HOOD & FRAME KIT
$592
■■TSI 801211 710 X 710MM HOOD & FRAME KIT $592
■■TSI 801212 710 X 1270MM HOOD & FRAME KIT
$768
■■TSI 801204 200MM BIO HOOD KIT
$688
■■TSI 801205 250MM BIO HOOD KIT
$688
■■TSI 960 AIR VELOCITY & TEMP PROBE
$1,017
■■TSI 962 AIR VELOCITY & TEMP PROBE (ARTICULATED) $1,258
■■TSI 964 AIR VELOCITY, TEMP & HUMIDITY PROBE $1,331
■■TSI 801206 2 HOOD PACKAGE 1’ X 4’ & 2’ X 4’
HOOD & FRAME KIT
$731
■■TSI 966 AIR VELOCITY, TEMP &
HUMIDITY PROBE (ARTICULATED)
$1,565
■■TSI 801207 2 HOOD PACKAGE 1’ X 5’ & 3’ X 3’
HOOD & FRAME KIT
$731
Accessories (Misc)
■■TSI 8930 PORTABLE BLUETOOTH PRINTER 1300 73 22 33 / [email protected]
kenelec.com.au
$829
11
VENTILATION TEST INSTRUMENTS
DUCT LEAKAGE TESTERS
TSI PAN341 DUCT ACCREDITATION SYSTEM
DUCT LEAKAGE TESTING
POSITIVE AND NEGATIVE DUCT ACCREDITATION
(PANDA) SYSTEM (MODEL PAN341)
AS PER AS4254
DUCT
LEAKAGE
TESTING
IS NOW REQUIRED FOR
SYSTEMS OVER 3000 L/S
14,306
$
General Features
Specifications
Range
-3735 Pa to +3,735 Pa
Resolution
0.1 Pa
Accuracy
1% of the reading
Duct static range
+/- 2,500 Pa
Volume Measurement (using TA465P)
Wilson radial flow grid
10 to 200 l/s
15mm conical inlet
Nozzle adapter
1-13 l/s low leak range
Resolution
0.01 l/s
Accuracy
2.5% of the reading
Voltage
240 Vac
Current
10 Amps
Dimensions
1130 x 660 x 600mm
Carry Weight
45Kg
Total Weight
55kg
12
The PANDA system provides contractors,
commissioning engineers, and research and
development technicians with the best in
class choice of test equipment to quantify air
leakage in ductwork and other areas as well
as the ability to measure the performance of
ducted systems.
The PANDA provides a fast, accurate,
automated solution and helps to ensure
compliance with EN12237, EN1507,
EUROVENT 2/2 and SMACNA standards,
enhancing energy savings in buildings.
The Airflow positive and negative duct
accreditation (PANDA) system PAN341
series provides contractors, commissioning
engineers, and research and development
technicians with the best in class choice
of test equipment to quantify air leakage
in ductwork and other areas as well as
the ability to measure the performance of
ducted systems. The PANDA provides a fast,
accurate, automated solution and helps to
ensure compliance with EN12237, EN1507
and EUROVENT 2/2 standards, enhancing
energy savings in buildings.
kenelec.com.au
• Positive & negative leakage testing in one rig
• Energy savings by testing & minimizing duct
leaks
• Accuracy is ± 2.5% of volume flow
• Fan speed control for charging up of duct
system to test static pressure within minutes
• Fits in the back of vans and station wagons
• Includes an Airflow TA465-P multi-function
instrument and PVM620 micro manometer
• Automatically calculates leakage rate in real
time
• Simultaneously displays flow leakage rate and static pressure
• Provides a pass/fail indication for a given
tightness class
• Automatically corrects actual volume flow
leakage rate to standard temperature and
pressure (STP)
• Monitors barometric pressure and temperature
in real time
• Stores data that can be downloaded for report
generation and documentation
• Works with optional Model 8934 portable
printer
• Compliant with the following standards:
- EN12237
- EN1507
- EUROVENT
- SMACNA
1300 73 22 33 / [email protected]
VENTILATION TEST INSTRUMENTS
LIQUID MANOMETERS
WHY SO MANY COMPANIES CHOOSE TSI LIQUID MANOMETERS
• Wide 2,068 kPa pressure range so they can
be used for all sorts of HVAC applications
including heating and cooling systems,
pumps, chillers, fan coils and much more.
Don’t limit yourself by buying instruments that
only cover a limited pressure range.
• They do it all in the one instrument. No
need to bolt on extra adapters and parts.
The HM600 series is ready to start taking
measurements immediately
• They can be easily used with every brand,
make and model of valve on the market.
Simply enter your flow curve for Stad valves
and off you go
• The HM600 series are the most reliable, stable
and proven meters we have come across to
date, as reported by client after client for many
years.
• They can quickly and reliably be zeroed unlike
some competitive instruments
• They are easy to use, simply turn them on for
trusted, reliable, repeatable results
• Simultaneously display differential, high side
and low side pressures without having to
change hose connections or instrument valve
settings
• Easy to read backlit display. Operates on
standard or rechargeable AA batteries
• Easily calculates flow using manufacturers Cv
(Kv) factors (HM685 model)
• Calculates heat flow, impeller diameter, brake
power and much more (HM685 model)
• Can’t be damaged as easily by over
pressuring the unit unlike lower pressure units
on the market
• Used extensively worldwide
• Made in the USA and includes a full 2 Year
warranty
TSI HM685 PRECISION LIQUID MANOMETER
NEW
Quick editing Cv/Kv factor directly
from the Flow Measurement screen
RENT
ME
General Features
Specifications
Pressure
Differential
pressure range
±2,068 kPa
±300 PSI
Gauge pressure range
-138 to 2068 kPa
-20 to 300 PSI
Resolution
0.001PSI, 0.01 kPa
Accuracy
±1% of reading
Temperature
• Includes a HM685 liquid manometer
• Hard carry case
• 2 x (2m x 6mm) hoses with shut off valves
• 2 x B&G readout probes
• 2 x P/T gauge adapter probes
• Power cord
• Manual
• Temperature probe
• CompuDat Windows based software and USB
interface cable
• NIST traceable calibration certificate and a 2
year warranty
Temp. probe
Included
Temp. range
-40 to 121°C
Resolution
0.1°C
Accuracy
0.3°C
Probes
Data logging
4000 points
Data logging interval
1 to 3600sec
■■TSI HMFIT ACCESSORY KIT
$320
• Includes 34 additional fittings and two ITT
Bell and Gossett readout probes
Windows-based software
Included
Time constant
1, 5, 10, 20 & 30 secs
Statistics (min, max, avg)
Yes
Cv (Kv) factor storage
Yes (100)
PC interface
USB
Weight
1.2kg
Power
4 x AA batteries
■■TSI REPLACEMENT HOSE KIT
$219
• Hose kit with 1 red hose and 1 blue hose
Range
0 to 631l/s
■■TSI TEMPERATURE PROBE
$388
• A 6” long probe for measuring temperature
Calculates volumetric
flows
Yes
Heat flow calculations
Yes
General
Flow
■■TSI REPLACEMENT GAUGE PROBES $80
• Includes P/T Gauge adapter probes,
package of 2 probes
■■TSI REPLACEMENT
READOUT PROBES
$146
• Bell and Gosset read-out probes, package
of 2 probes
■■TSI PROBE EXTENSION CABLE
$139
• Includes a 1.8m probe extension cable
WIDE PRESSURE
RANGE
±2,068 kPa
5,551
$
1300 73 22 33 / [email protected]
kenelec.com.au
13
VENTILATION TEST INSTRUMENTS
RELATIVE HUMIDITY & TEMPERATURE
THE EASY-TO-USE HM40 SERIES, COMPACT AND PORTABLE HUMIDITY METERS
The easy-to-use HM40 Series is a compact and portable humidity meter that provides reliable measurements in a wide range of applications. It is
the ideal spot-checking tool for everything from structural moisture measurement and air conditioning systems to humidity measurement in industrial
production processes and life science applications. There are four different models available: HM41, HM42, HM45, and HM46.
HM41 COMPACT AND PORTABLE
HUMIDITY & TEMPERATURE METER
HM42 HUMIDITY AND TEMPERATURE METER FOR TIGHT SPACES
General Features
General Features
• Humidity measurement accuracy (including
non-linearity, hysteresis, and repeatability):
• at 0 to +40 °C ±1.5 %RH (0 to 90 %RH)
• ±2.5 %RH (90 to 100 %RH)
• at -10 to 0 °C ±3.0 %RH (0 to 90 %RH)
• +40 to +60 °C ±4.0 %RH (90 to 100 %RH)
• Temperature measurement range:
-10 to +60 °C
• Measurement probe interchangeable
HMP113 probe
• Probe material PC/ABS plastic blend (white)
• Housing classification IP54
• Non-linearity, hysteresis, and repeatability:
• at 0 to +40 °C ±1.5 %RH (0 to 90 %RH)
• ±2.5 %RH (90 to 100 %RH)
• at -40 to 0 °C ±3.0 %RH (0 to 90 %RH)
• +40 to +80 °C ±4.0 %RH (90 to100 %RH) at
+80 to+100 °C ±4.0 %RH*
• Probe head temperature measurement
range -40 to +100 °C Measurement probe
HM42PROBE
• Probe head material stainless steel housing
classification IP40 (probe),
IP54 (indicator) Not recommended
for Td > 85 °C
• 4mm thin probe with membrane filter
575
1,259
$
$
HM45 HUMIDITY AND TEMPERATURE METER WITH
REMOTE PROBE HUMIDITY MEASUREMENT
HM46 HUMIDITY AND TEMPERATURE METER FOR MECHANICAL
DURABILITY AND EXTRA REACH
General Features
General Features
• Humidity measurement accuracy (including
non-linearity, hysteresis, and repeatability):
• at 0 to +40 °C ±1.5 %RH (0 to 90 %RH)
• ±2.5 %RH (90 to 100 %RH)
• at -40 to 0 °C ±3.0 %RH (0 to 90 %RH)
• +40 to +60 °C ±4.0 %RH (90 to 100 %RH)
• Probe temperature
• Measurement range -40 to +60 °C
• Measurement probe interchangeable
HMP113 with HM40HANDLE
• Probe material PC/ABS plastic blend (white)
Housing classification IP54
• Humidity measurement accuracy (including
non-linearity, hysteresis, and repeatability):
• at 0 to +40 °C ±1.5 %RH (0 to 90 %RH)
• ±2.5 %RH (90 to 100 %RH)
• at -40 to 0 °C ±3.0 %RH (0 to 90 %RH)
• +40 to +80 °C ±4.0 %RH (90 to 100 %RH)
• at +80 to+100 °C ±4.0 %RH*
• Probe head temperature measurement range
• -40 to +100 °C (short term up to 180 °C)
• Measurement probe HM46PROBE Probe head
material Stainless steel, brass filter Housing
classification IP40 (probe), IP54 (indicator) Not
recommended for Td > 85º C
1,150
699
$
$
HM70 HAND-HELD HUMIDITY AND TEMPERATURE METER (INCLUDES HMP75 RH+T PROBE)
The Vaisala HUMICAPR Hand-Held Humidity
and Temperature Meter HM70 is designed
for demanding humidity measurements in
spotchecking applications. It is also ideal for
field checking and calibration of Vaisala’s fixed
humidity instruments.
The HM70 incorporates the latest generation
of the Vaisala HUMICAPR Sensor. It is reliable
and has better than ever long-term stability.
Additionally, it has a sensor that copes well
with chemical interference and provides
accuracy that lasts in demanding conditions.
1638
FROM $
14
The chemical purge option maintains
measurement accuracy in environments with
high concentrations of chemicals. The Sensor
preheat option reduces measurement delays
as it keeps the sensor dry when the probeis
inserted into hot and humid processes.
kenelec.com.au
General Features
• Multilingual user interface
• Shows measurement trends graphically
• Proven Vaisala HUMICAP® Sensor technology
• 3 probe alternatives, temperature
measurement ranges between
-70 and+180 °C
• Multi probe operation; dewpoint and CO2
probes can also be connected
• 2 probes can be connected simultaneously
• Displays various humidity parameters
• Sensor preheat and chemical purge options
for demanding conditions
• NIST traceable calibration certificate included
1300 73 22 33 / [email protected]
HEPA FILTER TESTING
DIGITAL PHOTOMETERS
PH4 TEC SELF-CONTAINED CABINET / PH5 TEC RACK OR DESKTOP VERSION
TEC services provide the most highly advance
aerosol photometer available today.
■■PH4 TEC SELF-CONTAINED CABINET
Both PH-4 and PH-5 utilizes a high resolution
graphics display for easy reading. The
extremely simple menu-driven software
system utilizes command prompts to inform
the user of each setup process. The powerful
microprocessor provides control of numerous
functions that are not available on any other
aerosol photometer. The plug and play probe
is lightweight and features remote control
alarm options (includes a visual, audible and
NEW INNOVATIVE VIBRATING alarm). Other
features include robust built housing and
metal connector, a detachable shoulder strap
and cabinet storage for the probe (PH4) or
upcoming feature for PH5 includes electronic
calibration report storage.
General Features
• Case: Black Aluminium w/ comb. lock
Options
■■PH4 TEC
$14,403
• Size: 13” L x 18” W x 6.5” H
• Weight: 20 lbs. (9.1 kg)
• Power: 100-250 VAC 50/60 Hz
• Power Consumption: .92Amps @120V /
.46Amps @ 240 V
• Minimum Display Reading: .0001%
• Maximum Display Reading: 999%
• Sample Flow Rate: 1 CFM (28.3 SLPM)
■■PH5 TEC
$14,403
• Size: 13.5” L x 10” W x 6” H
• Weight: 18 lbs. (8.2 kg)
• Power: 100-250 VAC 50/60 Hz
• Power Consumption: .92Amps @120V /
.46Amps @ 240 V
• Minimum Display Reading: .0001%
• Maximum Display Reading: 1000%
• Sample Flow Rate: 1 CFM (28.3 SLPM)
Accessories
■■PH5 TEC RACK OR DESKTOP VER.
■■PROBE EXTENSION
11 FOOT LENGTH
14,403
$
$335
■■SPARE PARTS KIT
AEROSOL GENERATORS
AG-E1 / AG-E2 (ELECTRIC)
AG-A1 (PNEUMATIC)
The AG-E1 and AG E2 Laskin Nozzle aerosol
generators are completely self-contained
product (no external compressor needed).
■■AG-E1
■■AG-E2
The AG-E1 generator utilizes one and a
half Laskin nozzles, which provides 10ug/l
of aerosol when introduced into 2025 cfm
(57.34m3/min) of airflow. This aerosol
concentration is ideal for testing of biological
safety cabinets or for testing of air filtration
systems with air volumes less than 2025 cfm
(57.34m3/min).
The AG-E2 generator utilizes one quarter
Laskin nozzles, which provides 10ug/l of
aerosol when introduced into 338 cfm of
airflow. This aerosol concentration is ideal for
testing of product isolators, animal racks or
testing of filtration systems with air volumes
less than 338 cfm
(9.57 m3/min).
5,075
FROM $
1300 73 22 33 / [email protected]
The AG-A1 Laskin Nozzle aerosol generator
is designed especially for testing of biological
safety cabinets and filter systems.
The AG-A1 generator utilizes 4 Laskin nozzles,
which provides 10ug/l of aerosol when
introduced into 5400 cfm (152.9 m3/min) of
airflow. This aerosol concentration is ideal for
testing of HEPA and ULPA filtration systems
with air volumes up to 5400 cfm (152.9 m3/
min).
General Features
Options
■■AG-E1
$6,598
• Case: Black Aluminum w/ Handle
• Size: 16” L x 12” W x 11” H
• Weight: 36 lbs. (16.4 kg)
• Power: 115 VAC 60 Hz or 220VAC 50 Hz
• Reagent: PAO or equivalent
• Testing Range: 203 – 2,025 CFM (5.74 to
57.34 m3/min)
• Aerosol Generation: 1.5 Laskin nozzles
• Aerosol Output @ 203cfm: 100 ug/l
• Aerosol Output @ 2025cfm: 10 ug/l
• Capacity 0.5 to 0.75 gallons
4,365
$
■■AG-E2
$5,075
• Case: Black Aluminum w/ Handle
• Size: 13” L x 9.5” W x 8” H
• Weight: 23 lbs. (10.5 kg)
• Power: 115 VAC 60 Hz or 220VAC 50 Hz
• Reagent: PAO or equivalent
• Testing Range: 33 – 338 CFM (0.93 to 9.57
m3/min)
• Aerosol Generation: 0.25 Laskin nozzle
(Utilizes one jet of a 4 hole nozzle)
• Aerosol Output @ 33.8cfm: 100 ug/l
• Aerosol Output @ 338cfm: 10 ug/l
• Capacity: 0.25 to 0.50 gallons
kenelec.com.au
• Case: Black Aluminum w/ Handle
• Size: 14” L x 10” W x 9” H
• Weight: 16.5 lbs (7.5 kg)
• Compressed Air: 5.5 to 11 cfm @ 20 psi
• Reagent: PAO or equivalent
• Testing Range: 540 - 5,400 CFM (15.29 to
152.9 m3/min)
• Aerosol Generation: 2 or 4 Laskin nozzles
• Aerosol Output @ 540 cfm: 100 ug/l
• Aerosol Output @ 5400 cfm: 10 ug/l
• Capacity: 0.75 to 1 gallon
15
INDOOR AIR QUALITY
CO2 & MULTI-FUNCTION IAQ METERS
Providing a comfortable, safe and healthy indoor environment is an increasingly important concern.
Good indoor air quality increases concentration and productivity which can reduce lost days due
to absence. A good indicator of proper ventilation is the level of CO2 present in a space. Carbon
dioxide is a normal by-product of occupant respiration. Elevated levels of CO2 may indicate that
additional dilution ventilation is required.
MEASURING
PERCENT
OUTDOOR AIR
Percent outdoor air is the % of the total
volume of delivered air that is outdoor
air. There is more than one way to
measure %OA. One method is to use
a tracer gas like SF6. Perhaps a better
option is to take three readings of CO2
concentration and calculate the %OA.
The three reading locations include
outdoor air, supply air, and return air.
Another option is to take temperature
readings at those same three locations.
Using the following equation, %OA can
then be established.
TSI 7575 PLUG AND PLAY MULTIFUNCTION IAQ MONITOR
TSI 7575
PLUG AND PLAY MODEL
CHOOSE THE PROBES
THAT SUIT YOU
%OA = (Xr – Xs)/(Xr-Xo) x 100%
Where:
Xr = Return air CO2 concentration OR
temperature
Xs = Supply air CO2 concentration OR
temperature
RENT
ME
Xs = Outdoor air CO2 concentration OR
temperature
When to Use CO2 or Temperature to
Calculate % Outdoor Air
1,732
FROM $
General Features
Probes
• One instrument with multiple plug-in probe
options including VOCs and air velocity
• Simultaneously measures CO2, CO,
temperature and humidity with 982 probe
• Displays up to 5 measurements
• On-screen messages and instructions
• Store up to 39 days of data collected at oneminute log intervals
• TrakPro™ Data Analysis Software provided
for data logging, analysis and documenting
results
• Bluetooth communications for transferring
data or remote polling keypad lockout to
prevent tampering during unattended use
■■980 IAQ PROBE
• CO2, temperature, humidity
$2,516
■■982 IAQ PROBE
• CO2, temperature, humidity, CO
$2,984
■■960 AIR VELOCITY PROBE
• Velocity, temperature
$1,017
■■962 AIR VELOCITY PROBE
• Velocity, temperature (articulated)
$1,258
■■964 AIR VELOCITY PROBE
• Velocity temperature, humidity
$1,331
Options
■■7575 MULTI FUNCTION
METER
• Including 982 Probe
■■7575-X MULTI-FUNCTION
• IAQ meter only, no plug-in probes
$4,732
$1,732
■■966 AIR VELOCITY PROBE
$1,565
• Velocity, temperature, humidity (articulated)
■■984 VOC PROBE
• 10-20000 PPB, temperature
$4,659
■■985 VOC PROBE
• 1-2000 PPM, temperature
$3,496
Percent outdoor air can be calculated
using either CO2 or using temperature.
Generally, CO2 should be used when
the building that you are interested in
has a lot of occupants. This ensures
that the CO2 concentration values of
outdoor air and return air are far apart.
The further these two values are apart,
the more accurate the %OA value will
be. If there are few or no occupants,
then there is little accumulation of CO2
and the accuracy will not be as good.
Similarly, temperature should be used
when the building or room of interest
has a big difference in temperature
from outdoor air temperatures. This
means when it is hot or when it is cold
outdoors, then it is a good time to use
temperature as a means to calculate
%OA. To take a temperature calculated
%OA value, take the measurements
at the Air Handling Unit. The reason
the measurements need to be taken at
the air handling unit is because there
are often heating or cooling coils in
the ducts or near the diffusers in some
buildings which would adversely affect
the readings and it is difficult to verify if
they are present or not.
■■986 IAQ PROBE
$5,471
• VOC 10-20000 PPB, CO2, temperature,
humidity
■■987 IAQ PROBE
$4,900
• VOC 1-2000 PPM, CO2, temperature,
humidity
■■995 ROTATING VANE PROBE
• 100 mm, velocity, temperature
$856
■■792 SURFACE TEMPERATURE PROBE
$219
■■794 AIR TEMPERATURE PROBE
■■800681 IAQ PROBE STAND
16
kenelec.com.au
$219
$73
1300 73 22 33 / [email protected]
INDOOR AIR QUALITY
TSI 7515/7525/7545 IAQ-CALC METERS
TSI IAQ-Calc™ Meters are outstanding
instruments for investigating and monitoring
indoor air quality (IAQ). Handheld, easy to use
allowing you to gather your data and work with
ease.
CO
General Features
Temperature
✓
✓
• Conduct IAQ evaluations
• Determine thermal comfort
• Examine building IAQ conditions to optimize
worker productivity
• Comply with regulations and guidelines
• Model 7515 is a cost-effective meter for
carbon dioxide (CO2) measurements.
• Models 7525 and 7545 simultaneously
measure and data log multiple parameters.
Model 7525 measures CO2, temperature,
humidity, and calculates dew point, wet bulb
temperature, and percentage outside air.
• Model 7545 adds detection of carbon
monoxide (CO)
Humidity
✓
✓
Percentage outside air
✓
✓
Dew point
✓
✓
Wet bulb temperature
✓
✓
Data logging/downloading
✓
✓
Options
CO2
■■TSI 7525
• CO2, temp, humidity, data logging
7525
7545
✓
✓
✓
✓
Statistics
✓
Review data
Certificate of Calibration
✓
■■TSI 7515
• CO2 & statistics display
7515
Available
✓
✓
✓
✓
✓
✓
✓
Unavailable
$907
$2,831
■■TSI 7545
$3,240
• CO2, temp, humidity, CO, data logging
907
FROM $
GM70 HAND-HELD CARBON DIOXIDE METER
The Vaisala CARBOCAP® Hand-Held Carbon Dioxide Meter GM70 is a
user-friendly meter for demanding spot measurements in laboratories,
greenhouses and mushroom farms. The meter can also be used in
HVAC and industrial applications, and as a tool for checking fixed CO2
instruments. The GM70 has a short warm-up time and is ready for use
almost immediately. It has a menu-based interface, a graphical LCD
display and data logging capability. The optional MI70 Link Windows®
software in combination with a USB connection cable provides an easy
way to handle data in a PC environment.
General Features
1,966
FROM $
1300 73 22 33 / [email protected]
• Proven Vaisala CARBOCAP® reliability
• Two optional sampling methods: diffusion or pump aspiration
• User-friendly meter with multilingual user interface
• Numerical and graphical display of measurements
• Data can be logged and transferred to PC via MI70 Link software
• Wide selection of measurement ranges
• Easy recalibration using the interchangeable probes
• Suitable for field checking of fixed CO2 instruments
• Short warm-up time
• Compact and versatile
kenelec.com.au
17
INDOOR AIR QUALITY
DUST & DPM MONITORS
DUSTTRAK AEROSOL MASS CONCENTRATION MEASUREMENT
DustTrak: Real-Time, Laser based monitors for OHS professionals. The DustTrak measures aerosol contaminants such as dust, smoke, fumes
and mists, giving you real-time aerosol mass readings. You can measure PM1, PM2.5, PM4 & PM10 one at a time or simultaneously depending on the
model.
TSI 8534 DUSTTRAK PORTABLE DUST MONITOR
TSI 8532 DUSTTRAK II PORTABLE DUST MONITOR
General Features
RENT
ME
General Features
RENT
ME
• 100nm to 15μm particle size range
• 1ug/m3 to 150mg/m3 dust concentration
range
• 3600mA rechargeable lithium ion battery
• 66,000 point data logging & software
• Measures all PM fractions (simultaneous)
• Large VGA colour graphical display
• 2 year warranty
Measures PM
fractions
simultaneously
13,936
$
Measures PM
fractions one at
a time
• 100nm to 10μm particle size range
• 1ug/m3 to 150mg/m3 dust concentration
range
• 3600mA rechargeable lithium ion battery
• 66,000 point data logging & software
• Large VGA colour graphical display
• 2 year warranty
8,204
$
REAL TIME AEROSOL MONITORING
TSI AM510 SIDEPAK PERSONAL AEROSOL MONITOR
RENT
ME
6,312
FROM $
With sampling pumps, you simply don’t get
that dynamic real-time data that you can
get with a TSI real-time AM510 monitor. The
SIDEPAK AM510 series are rugged, lightweight,
belt-mounted laser photometers. The builtin sampling pump lets you attach a wide
variety of size-selective inlet conditioners for
worker breathing zone or area measurements
with a respirable cyclone or one of the three
integrated impactors. The easy-to-read display
shows your data in both real-time aerosol
mass concentration and 8-hour time-weighted
average (TWA), with datalogging enabling you
to download stats to produce graphs and
reports.
General Features
• 0.1μm to 10μm particle size range
• 1 ug/m3 to 20 mg/m3 concentration range
• 33,000 point data logging with software
• Ideal for indoor air, environmental & OH&S
work
• Built-in pump, battery operated, ready to use
Options
■■AA BATTERY MODEL
$6,312
■■1650mAh BATTERY MODEL
$6,472
■■2700mAh BATTERY MODEL
$6,625
REAL-TIME DPM MONITORING
FLIR AIRTEC REAL-TIME DPM ELEMENTAL CARBON MONITOR
RENT
ME
8,991
$
18
The Airtec monitor is a compact and highly
portable real-time elemental carbon monitor
designed to determine exposure of workers in
underground mines to DPM. Airtec uses a real
time particle capture and light transmission
method to yield elemental carbon values
which closely correlate with NIOSH 5040 test
results to measure EC and TC levels. This
monitor is designed to allow the operator and
management to take immediate, remedial
action to address a problem area. Levels
can also be tracked over time to determine
the possibility of long term health hazards
and help eliminate the risks associated with
over-exposure. During monitoring the Airtec
uses consumables, generally a cassette will
last a 12 hour shift with a change of pre-filter
cartridge for every three cassettes used.
• Developed at the NIOSH research laboratories
in Pittsburgh, USA
• Precisely replicates results according to the
NIOSH 5040 method.
• Specifically detects DPM via EC
measurements
• No cross sensitivity to other dusts and
aerosols
• No more waiting days for results, saves time
and money
• Battery or AC powered for personal or
fixed monitoring
• 66.6 day data logging with software provided
and FREE updates
• Easy to change sample / analysis filter
General Features
■■WITH 4-20MA OUTPUT
• Displays elemental carbon levels in true realtime (no sending filter samples off to labs)
• Laboratory accuracy in a small portable clip
on device
Consumables
kenelec.com.au
Options
$9,637
■■AIRTEC CONSUMABLE KIT
$323
• Contains 3 cassettes & 1 prefilter cartridge
1300 73 22 33 / [email protected]
INDOOR AIR QUALITY
PARTICLE COUNTERS - CLEANROOM AND ULTRAFINE
For life science and electronic clean room applications, TSI particle
counters are best in class. TSI instruments meet strict industry standards
and are calibrated to match widely recognized standards for particle
measurements. TSI offers portable and handheld particle counters for
classifying clean rooms.
Particle counters are regularly used to monitor occupational
environments. Airborne particle counters help observers in office settings
determine indoor air quality for personal health and building hygiene
purposes.
Particle counters are used for an array of indoor air quality and industrial
hygiene related tasks, such as locating sources of particle emissions
and aerosol transport pathways. Particle counters also are used for
assessing filter efficiency in HVAC systems and measuring particle size
distributions and raw particle counts.
TSI 9306 PORTABLE PARTICLE COUNTER
General Features
• 0.3μm to 25μm particle size range
• 2.8 lpm flow rate with built-in pump
• 10,000 point data logging with software included
• USB & Ethernet interfaces, HEPA filtered output
• Colour LCD display, 6 hour lithium ion battery
• 2 year warranty
Options
■■TSI 9306-03
• 6 Fixed size channels with the channels set at
0.3μm, 0.3μm, 0.5μm, 7μm, 1.0μm, 2.0μm & 5.0μm
$6,312
■■TSI 9306-04
• 6 Fixed size channels with the channels set at
0.3μm, 0.5μm, 1.0μm, 3.0μm, 5.0μm & 10μm
$6,312
■■TSI 9306-V2 RENT ME
• 6 user selectable size channels from 0.3μm to 10μm
$6,429
6,312
FROM $
TSI 8525 P-TRAK REAL-TIME ULTRAFINE PARTICLE COUNTER
TSI 3007 ULTRA-FINE PARTICLE COUNTER
RENT
ME
8,861
13,636
$
$
General Features
General Features
• 20 nm to 1μm wide particle size range
• Ideal for indoor air quality and OH&S applications
• Terrific in detecting combustible aerosol sources
• Sample Flow Rate - 100 cm3/min
• Concentration Range - 0 to 5 x 105 particles/cm3
• Audible and visual particle detection alerts
• Fully serviced and supported in Australia
• 2 year warranty
• 10nm to 1μm wide particle size range
• Ideal for indoor air and OH&S work
• Menu driven, easy to use
• USB interface, data logging and software
• Audible and visual particle detection alerts
• Packed full of other features
These particle counters are calibrated with NIST traceable PSL spheres using TSI’s world-class Classifier and Condensation Particle Counters,
the recognized standard for particle measurements. Backed with a standard two-year warranty and TSI’s long-standing reputation for high
quality, there are no other handheld particle counters like it on the market today.
1300 73 22 33 / [email protected]
kenelec.com.au
19
INDOOR AIR QUALITY
AIR SAMPLING - PUMPS, FILTER CASSETTES & SAMPLING MEDIA
GRAVIMETRIC ANALYSIS - AIR SAMPLING PUMPS
ESCORT LC AIR SAMPLING PUMP
ESCORT ELF AIR SAMPLING PUMP
RENT
ME
1,011
1,397
$
The Escort LC Air Sampling Pump can be used with a variety of personal
and area sampling devices to collect such airborne contaminants as
asbestos fibers, toxic gases, vapors, particulates, fumes and mists. It
can also be used to sample silica dust, coal dust and organic vapors.
General Features
• Watertight case for occasional water spray
• Inlet filter traps particulate matter
• Separate LEDs indicate pump operation and low battery
• Stainless steel-filled plastic case provides EMI/RFI protection
• Exceptionally quiet operation
• Includes sampling line and charger
• 2 year warranty
Escort ELF air sampling pumps feature a state of the art electronic
laminar flow sensor to provide a constant flow control with ± 2.5%
regulation of flow rate (from 1-3 lpm) with automatic compensation for
changes in battery voltage, temperature, altitude, and sample load. An
internal secondary standard calibrates the pump continuously and needs
to be checked against a primary standard only once per month (or every
200 hours for coal mine dust sampling).
General Features
Accessories
■■LEATHER CASE
FROM $
$100
• Patented electronic laminar flow control
• Internal secondary standard calibrates the pump continuously,
maintaining OSHA compliance
• Check against a primary standard only once a month or every 200 hours
for coal mine dust sampling
• Inlet filter traps moisture and particular matter
• Rated IP66 for resistance to water and dust ingress
• Exceptionally quiet operation
• Flow-fault Indicator shows any sample inlet blockage
• Run/hold feature allows “time out” during sampling process
• Elapsed time readout and low-battery warning
• Low flow and dual tube sampling available with Gemini Twin-Port
Sampler
• 2 year warranty
Options
■■STANDARD
$1,397
■■WITH SAMPLING LINE AND CHARGER $1,551
■■WITH GEMINI SAMPLER
$1,891
Accessories
■■LEATHER CASE 20
kenelec.com.au
$100
1300 73 22 33 / [email protected]
INDOOR AIR QUALITY
AIR SAMPLING - PUMPS, FILTER CASSETTES & SAMPLING MEDIA
TSI 4146 PRIMARY CALIBRATOR KIT
HOW DO I
PROPERLY
CALIBRATE
MY PUMP?
ZEFON DIGICAL 30 CALIBRATOR
RENT
ME
When sampling using filter cassettes,
the accuracy of your sample collection
depends on an accurate amount of
air passing through the filter. Filter
cassettes create a high amount of
backpressure in the sampling ‘train’. So
to calibrate the pump airflow properly
the sampling ‘train’ must be in a certain
order. Airflow must pass though the
calibrator first, then through the media,
and finally through the pump. By
configuring your calibration setup this
way, you are measuring the flow rate of
air as it enters the filter.
1,717
1,615
$
The TSI Primary Calibrators are portable,
battery-operated units that are lightweight,
easy to use and accurate within 2% of reading.
Volumetric flow rate is displayed continuously
so adjustments to pump flow can be made in
real-time. The LCD display is easy to read.
General Features
• Range:0.01-20LPM
• Accuracy: within 2%
• Battery powered, compact and lightweight
• NIST traceable calibration certificate
Options
$
A primary calibration device, the DigiCal™
Calibrator provides instantaneous calibration
for instruments like the Zefon Escort LC Pump
or the secondary flow standard inside the
Escort ELF Sampling Pumps. Just press the
plunger and the DigiCal Calibrator does the
work. Its unique flow cell replaces conventional
bubble tubes and makes calibration easier. The
Digi-Cal Calibrator achieves extreme accuracy
by utilizing a computerized flow meter that
provides instantaneous flow readouts on a
digital display.
General Features
• Flow rate: 0.1 to 30LPM
■■TSI4046
• Flow rate of 2.5 to 300LPM
$2,091
ACCESSORIES FOR SAMPLE PUMPS
ZEFON HEAVY DUTY 10MM DORR-OLIVER
CYCLONE – FOR MINING
PART# 10044015
ZEFON 10MM STATIC CONDUCTIVE
NYLON CYCLONE WITH HOLDER
PART# ZA0081
379
133
$
Designed to fit all standard 37mm Industrial
Hygiene (IH) cassettes the cyclone and holder
are designed to orient the cyclone in the proper
position for sampling and are fixed with a
strong, spiked collar clip so they won’t come off
under even strenuous work.
ZEFON ALUMINUM CYCLONE FOR
RESPIRABLE DUST WITH HOLDER PART#
ZA0062
This static conductive replica of the 10mm
“Dorr-Oliver” Nylon Cyclone eliminates any
possible bias in sampling results from static
charging.
ZEFON UNIVERSAL CASSETTE AND
CYCLONE HOLDER - PART# ZA0061
154
1300 73 22 33 / [email protected]
144
$
FROM $
A reusable filter cassette with a sampling head
designed to measure the worker’s exposure
to inhalable particulates and respirable dust.
When sampling at the recommended flow rate
of 2 LPM, it collects a particle size distribution
that includes particles of 100 micron and
smaller. This meets the definition set forth by
ACGIH AND BRITISH METHOD MDHS 14/3
for inhalable particulate.
Options
■■PLASTIC PART# ZA0300
$144
■■STAINLESS STEEL PART# ZA0303
$267
49
$
This Zefon cyclone is a replica of the SKC
Aluminum Cyclone and is ideal for silica and
crystalline.
ZEFON INHALABLE DUST SAMPLER WITH
CONDUCTIVE PLASTIC CASSETTE
$
The Zefon Universal Cassette and Cyclone
Holder allows cassettes and cyclones to be
attached onto a workers collar. Compatible
with 37mm cassettes, 25mm cassettes, and
aluminum cyclones manufactured by both
Zefon and SKC.
kenelec.com.au
Cyclones are designed to
separate respirable dust particles
from non-respirable particles and
allow the respirable particles to be
collected on a filter cassette.
21
INDOOR AIR QUALITY
PREASSEMBLED AIR SAMPLING FILTER CASSETTES
Zefon offers a complete line of 37mm air sampling cassettes manufactured to meet all applicable NIOSH, OSHA, and EPA standards. All 37mm cassette
housings are manufactured in-house from polystyrene or polypropylene and are available in two or three piece configurations. All 37mm cassettes are
individually assembled and preloaded under stringent quality assurance standards with only the finest quality membrane and support pads.
PRELOADED AIR SAMPLING CASSETTES
ENDOTOXIN-FREE CASSETTES
69
FROM $
154
• Supported filter types – MCE, PVC,
Polycarbonate, Glass Fibre, PTFE (with PP
support), PTFE (Zefluor) with PTFE support,
PTFE (pure, unsupported) and Quartz
• 25mm and 37mm diameter
• 2-piece Sytrene, 3-piece Styrene and
Conductive Polypropylene
GRAVIMETRIC PRE-WEIGHED CASSETTES
FROM $
(50 PER BOX)
Zefon Sterile Endotoxin-Free Cassettes are
specially manufactured to ensure there ist
no background interference when sampling
endotoxins.
Zefon sterile filter cassettes are suitable for
a wide range of microbiological sampling
and analysis including fungi collection, water
supply testing and beverage monitoring.
General Features
General Features
• 0.45µm Polycarbonate filter
• 37mm Styrene housing
• Sterilized by irradiation
• Endotoxin free
• 37mm 3pc stryrene housing
• Sterilized by gamma radiation
• MCE Filters in 0.8 or 0.45 micron pore size
• Polycarbonate Filters in 0.2 or 0.4 micron pore
size
Options
Configurations available to
conform with most NIOSH
standards that require filter
cassettes.
184
FROM $
(50 PER BOX)
General Features
STERILE 37MM FILTER CASSETTES
■■PS7345PCEFB CASSETTE
• 37mm 3pc 0.4μ,10/box
$154
■■PS7345PCEFC CASSETTE
• 37mm 3pc 0.4μ, 50/box
$748
Options
■■W/ MCE FILTERS
FROM $184
■■W/ POLYCARB. FILTERS
FROM $215
GRAVIMETRIC MATCH-WEIGHED CASSETTES
Note: The use of match-weighed cassettes
overcome the environmental conditions
issue as both filters are exposed to the same
environmental conditions. Therefore, after
sampling, the measured weight difference is
solely the amount of contaminate collected.
General Features
325
FROM $
(50 PER BOX)
Zefon pre-weighed cassettes eliminate the
inconvenience of pre-weighing filters by
providing the filter weight on each cassette
prior to sampling.
Collected
Particulate
General Features
• 2 or 3 piece housing
• Preloaded, ready to use
• Each cassette labelled with serial number
• Colour coded to indicate filter type
• 5 Decimal weight accuracy (.00001g)
• Use of Pure Homopolymer PVC filters provide
excellent weight stability
• PVC filters specially designed with no silica
and low ash properties
• 2 or 3 piece housing
• Versions available with MCE (0.8um pore size)
and PVC (5.0um pore size) filters
• Labels with serial numbers provided
• Colour coded indicating filter type & pore size
• Preloaded - ready to use
• Leak free design
Inlet
Options (Gravimetric Matched)
Test Filter
Control Filter
Support Pad
■■5M92M CASSETTE
• 25mm, 2 pc, 0.8um, MCE
$401
Outlet
■■7M52P CASSETTE
• 37mm, 2 pc, 5.0um, PVC
$370
■■7M53P CASSETTE
• 37mm, 3 pc, 5.0um, PVC
$370
■■7M92M CASSETTE
• 37mm, 2 pc, 0.8um, MCE
$325
■■7M93M CASSETTE
• 37mm, 3 pc. 0.8um, MCE
$325
Zefon match-weighed cassettes eliminate
the need to weigh filters before sampling by
providing two filters which are matched in
weight. The top filter collects particulate and
the bottom filter serves as a control. After
sampling, both filters are weighed and the
difference in weight equals the amount of
contaminate collected.
Options (Gravimetric Matched)
■■7P52P CASSETTE
• 37mm, 2 pc, 5.0um, PVC
$287
■■7P53P CASSETTE
• 37mm, 3 pc, 5.0um PVC
$287
22
Environmental conditions can have a significant effect on filter weight readings. When
using Zefon pre-weighed cassettes, it is important that the post sample weighing is
performed under the same environmental conditions used at the Zefon factory. Those
conditions are set at a temperature of 68° F (± 1.0°F) and a rel. humidity of 50% (± 1%).
kenelec.com.au
1300 73 22 33 / [email protected]
INDOOR AIR QUALITY
AIR SAMPLING - PUMPS, FILTER CASSETTES & SAMPLING MEDIA
UNASSEMBLED AIR SAMPLING FILTER CASSETTES
Similar to the preloaded cassettes, Zefon also supply a full range of unassembled cassettes. This includes cassette housings, membrane filters
and filter support pads. All components are manufactured in-house to meet stringent quality standards.
CASSETTE HOUSINGS
All unassembled cassette housings feature
a leak free design and are manufactured inhouse to the same stringent quality standards
that are applied to pre-assembled cassettes.
General Features
Clear Styrene
Opaque Styrene
Asbestos Style
• Leak free design
• Available in 25mm and 37mm sizes
• Available in 2-piece, 3-piece and 4-piece
configurations
• Asbestos style (cone outlet) cassette housing
also available
• Supplied in packs of 50
• Ideal for commercial laboratories that use high
volume of cassettes
41
FROM $
PVC Filter
■■CLEAR STYRENE
• The most common material, a crystal clear
styrene that provide excellent visibility inside
the cassette housing
■■OPAQUE STYRENE
• Manufactured of the same styrene the clear
one is, except it is an opaque brown colour
to prevent transmission of light into the
cassette
■■POLYPROPYLENE (SOLVENT RESISTANT)
• A natural polypropylene with a cloudy
looking colour. Material is resistant to a wide
range of chemicals
■■CONDUCTIVE BLACK POLYPROPYLENE
• Manufactured using a polypropylene that
is carbon filled making it static conductive
when grounded properly.
MEMBRANE FILTERS
MCE Filter
Options
FILTER SUPPORTS PADS
Silver Filter
PCTE Filter
PTFE Filter
Glass Fibre
35
25
FROM $
A full range of membrane filters is available
from Zefon. These are manufactured in-house
to the same stringent quality standards that
are applied to pre-assembled cassettes.
General Features
• Available in MCE, PVC, PCTE, Silver, PTFE
and Glass Fibre materials
• Pore sizes from 0.2um to 5.0um
• Available in 25mm, 37mm and 47mm sizes
• Majority supplied in packs of 100
Options
■■MCE MEMBRANE FILTERS
• Mixed Cellulose Ester (MCE) Filter
Membrane Discs are manufactured from a
mixture of cellulose acetate and cellulose
nitrate. MCE membrane filters are one
of the most widely used filters in both air
monitoring and analytical applications.
■■PVC MEMBRANE FILTERS
• Polyvinyl Chloride (PVC) Membrane Filters
(GLA-5000) are excellent membrane filters
for sampling airborne metals, silica, and
dust. Comprised of inherently low ash
pure homopolymer PVC, these filters are
particularly suited to provided interferencefree silica determinations. Low moisture
pick-up and low tare weight assure
gravimetric stability.
1300 73 22 33 / [email protected]
FROM $
■■POLYCARBONATE MEMBRANE FILTERS
• Polycarbonate track-etch (PCTE) membrane
filters are manufactured from polycarbonate
films. They feature a smooth flat surface,
exhibit well-controlled pore size and shape,
and have very low levels of extractables.
Naturally hydrophobic
Zefon manufacture a range of filter support
pads. These filter supports are used behind
filter membranes to support them from
collapsing while still allowing free air flow
through them.
■■SILVER MEMBRANE FILTERS
• Silver Metal Filter Membranes are pure
metallic silver (99.97% pure silver) and
are available with particle retention ratings
of 0.45 or 0.8 microns. Silver metal
membranes are used in a variety of filtration
applications, and their ability to withstand
extreme chemical and thermal stress
makes them ideal for applications involving
aggressive fluids and/or high temperatures
• Available in cellulose, porous plastic and
stainless steel grids
• Available in 25mm and 37mm sizes, stainless
steel grid also available in 47mm size
• Supplied in packs of 100, stainless steel filter
supports are sold as individual units
■■PTFE MEMBRANE FILTERS
• PTFE membrane filters provide excellent
chemical resistance and are suitable for
use in the most aggressive sampling
environments
■■GLASS FIBRE FILTERS
• Zefon glass microfiber filters are produced
from 100% borosilicate glass microfiber
without the use of binders or strengthening
agents. The fibers used to manufacture
these depth filters are smooth and uniform.
This permits their characteristically high flow
rates while allowing retention of exceptionally
small particles and high load capacity. These
characteristics are particularly important in
applications involving high concentrations of
particulate
kenelec.com.au
General Features
Options
■■CELLULOSE
• Cellulose pads are made up of 100% pure
cellulose and the most common support
used in filter cassettes.
■■POROUS PLASTIC
• Porous plastic supports work well when
sampling chemicals that are not compatible
with cellulose.
■■STAINLESS STEEL GRIDS
• Stainless steel grids can be used in a wide
range of filter holders and can easily be
cleaned and re-used.
23
INDOOR AIR QUALITY
MOULD & MICROBIAL SAMPLING
BIO PUMP SAMPLING
ZEFON BIO PUMP PLUS
Ideal for indoor air quality sampling, mould
spores, bio aerosols, pollen, fibres and
inorganic particulates.
The Zefon Bio-Pump® Plus is the smallest
and lightest portable battery powered IAQ
sampling pump available. It provides the
simplest and most convenient way to sample
with Air-O-Cell® and Via-Cell® cassettes at a
flow rate of 15LPM.
General Features
1,132
FROM $
• Extra long battery life - Take over 100 samples
on a single charge
• Programmable timer allows unattended
operation
• Quick-charge battery charger included (approx
3 hours)
• Nothing to prepare or clean. Just place the
cassette on the pump, set the time and go
• Each pump comes complete with both an AirO-Cell® and Via-Cell® flow indicator, quick
charger, 10 free Air-O-Cell® cassettes and a
handy carrying case
Options
■■ZBP-200
$1,132
• Bio Pump Plus with 230 VAC charger
■■ZBP-200-CKIT
• Bio Pump Plus with TSI Calibrator
$3,726
Acessories
■■BIO PUMP REMOTE EXTEN. TUBE $51
■■FILTER, BIO PUMP BIOISOLATION $19
■■TRIPOD STAND - HEAVY DUTY
$68
SAMPLING CASSETTES AND MEDIA FOR BIO PUMP
Zefon manufactures a complete Family of IAQ sampling cassettes to meet demanding situations
AIR-O-CELL CASSETTES
VIA-CELL SAMPLING CASSETTES
Optical microscopy
AIR-O-CELL CSI CASSETTES
Culture and PCR
Air-O-Cell sets the standard for particle
capture and optical analysis.
General Features
• The ultimate multipurpose cassette for:
• Bio aerosols: mould spores, pollen, insect
parts, skin cell fragments, asbestos,
fibreglass, cellulose, clothing fibres,
synthetics, IAQ sampling
• Inorganic particulate: ceramic, fly ash,
copy toner, oil droplets, paints, rust, salts,
products of combustion
Optical, SEM & X-Ray analysis
The Via-Cell® bioaerosol sampling cassette
is designed to collect both viable and nonviable bioaerosols, maintain viability of the
viable mold spores and prevent growth during
transport to the laboratory. Sampling with the
Via-Cell® is very similar to its sister product
Air-O-Cell®. Simply connect it to any pump
calibrated to 15LPM and run your sample. The
key to the Via-Cell® is that the media used
for collection maintains viability of spores
and allows several analysis options including
culturing, PCR analysis and microscopy.
Options
Options
■■AOC010 - BOX OF 10
$78
■■AOC050 - BOX OF 50
$344
■■VIA010 - BOX OF 10
$216
Air-O-Cell CSI brings the advantages and
precision of SEM particle analysis with
x-ray chemical analysis to indoor air quality
investigations.
General Features
• Samples can be tested and re-tested using
optical, scanning electron microscopy (SEM)
and x-ray analysis in any order without
significant particle loss or complex sample
preparation
• Applications include indoor air quality, home
inspection, floor inspection, stack emissions,
allergy testing, clean room monitoring and
fibre analysis
Options
■■CSI010 - BOX OF 10
24
kenelec.com.au
$154
1300 73 22 33 / [email protected]
INDOOR AIR QUALITY
MOULD & MICROBIAL SAMPLING
OTHER SAMPLING TECHNOLOGIES
BIO-TAPETM
TEDLAR GAS SAMPLING BAGS
General Features
Bio-Tape™ provides a standardized surface
sampling method used for the determination of
possible microbial, bioaerosol, and inorganic
dust contamination. Quickly take a sample and
measure the relative degree of contamination.
It is especially useful when sampling valuable
or non-transportable materials and is very
effective on smooth areas.
• Provides sample consistency
• Individually serialized for traceability
• Prevents cross contamination
• Requires less laboratory prep time
• Eliminates problems of placing tape in a zip
bag, or broken glass slides
• Samples may be archived by the laboratory for
later review
Options
■■BT0025 SLIDES - 25 IN A BOX
$34
■■BT0050 SLIDES - 50 IN A BOX
$65
■■BT0500 SLIDES - 500 IN A BOX
$528
Bio-Tape consists of a flexible plastic
microscope slide with a pre-defined adhesive
area. A center-line marker on the slide aids
the user in locating the center when taking the
sample and also aids the laboratory analyst.
Each slide is provided with a unique serial
number for traceability and packed in a slide
mailer to prevent cross contamination.
Using Bio-Tape™ helps provide
more consistency in your samples.
This is because each sample uses
the same amount of adhesive
surface area and the provided
packaging offers protection during
shipment to the laboratory. When
the laboratory receives your
sample, there will be no guessing
where the sample area is and no
sticky mess of tape to deal with.
Bio-Tape is compatible with both optical
microscopy and scanning electron microscopy
(SEM). This provides the ability to perform
optical and SEM analysis along with an x-ray
analysis on the exact same air surface sample
and exact same particles.
General Features
2,281
The Bio-Culture™ air sampler is the smallest,
most cost effective and easiest to use sampler
available for microbial air sampling. The BioCulture™ air sampler features a selectable,
continuous, constant sample flowrate and is
simple to operate. No tools are required. Its
quiet operation allows unobtrusive sampling
in a variety of applications. Selecting the
appropriate air sampling device is an important
step in preserving the quality of your work
environment. Think carefully about your
workflows and consider all features of a
microbial air sampler to ensure you receive a
product that delivers what you require without
compromising your environment.
1300 73 22 33 / [email protected]
General Features
• Chemically inert Tedlar® film
• Reusable if purged with nitrogen
• Easy storage and handling
Applications
BUCK BIO CULTURE MICROBIAL AIR SAMPLER
$
Gas sample bags, usually called Tedlar Bags,
are a convenient way to collect gas and
vapour samples in air. Many chemical hazards
can be effectively collected by sample bags,
allowing easy transport to the laboratory for
testing. Zefon EconoGrab™ gas sampling
bags are excellent quality, low-cost tedlar® gas
sampling bags that feature a choice of a single
polypropylene fittings or stainless steel fitting.
• Flow rate - 30-120LPM (user adjustable)
• Uses standard 90mm petri dishes
• Sampling head design of 380 1mm diameter
holes
• Battery powered - runs for 6-8 hours
(depending on flow rate, battery maintenance
and backpressure)
• Tripod mounting threads on bottom of unit allows 90 degree sampling
• Sampling head may be sterilized by autoclave
or gas torch
• Built-in timers of 1, 2, 5, and 10 minutes
• Optional calibration head allows field
calibration of flow rate with a NIST traceable
calibrator
Options
■■BIO-CULTURE CALIBRATION HEAD $1,400
• NIST traceable venturi calibrator within 1%
accuracy that allows users to calibrate the
flow of the Bio-Culture pump themselves
without having to send the pump out for
service or calibration
• Allows flow calibration at flow rates between
30-120LPM
• Designed for use with impeller fan
type pumps like the Bio-Culture, which
require calibration devices with very little
backpressure resistance
• Provided with a certificate of calibration
traceable to NIST standards
kenelec.com.au
• Grab sampling
• Indoor air sampling
• Gas blending
• Assessing exposures from leaks and spills
• Leaky underground storage tanks
• Sampling from vents or flues
• Hazardous waste site sampling
• Measuring anesthetic gases in operating
rooms
• Stack sampling
• Soil gas sampling
• Calibration gas standards
• Ground water testing
Options
EconoGrab™ Tedlar bags come with a choice
of a single polypropylene fittings (suitable for
use in most applications) or stainless steel
fitting (for use when sampling compounds that
are not chemically inert to polypropylene.)
Polypropylene
Fitting
Stainless Steel Valve Fitting
■■0.5 L
$19
$30
■■1.0 L
$19$30
■■3.0 L
$25$36
■■5.0 L
$28$39
■■10.0 L $43$54
■■25 L
$78$89
■■50 L
$132$143
■■100 L
$194$205
25
INDUSTRIAL TRANSMITTERS
AIR VELOCITY TRANSDUCERS
PRECISION SOLUTIONS FOR REAL-TIME AIR VELOCITY MONITORING
TSI SENSORS
The 8455, 8465, and 8475 Air Velocity
Transducers are ideal for both temporary
and permanent installations for air velocity
measurements in research and development
labs, manufacturing processes, and other
applications. The full–scale range, signal
output, and time constant are user selectable
and can be easily changed to meet the needs
of your application.
General Features
1,302
FROM $
• 0.125 to 50m/s wide velocity range
• +/- 0.5% full scale or 2% of reading accuracy
• 11-30 volts DC or 18-38 volts AC input power
• Fully programmable 0-5v, 0 to 10v, 0 to 20v, 2
to 10v or 4-20mA outputs
• 0.05 to 10 second variable time constant
• 7.5, 15, 22.5 and 30cm long probe options
• 0 to 60°C temperature range
• Easy connection to data loggers/BMS systems
• Full 2 year warranty
Models
■■TSI 8455
• Protective window to prevent impact damage
■■TSI 8465
• Windowless sensor for higher sensitivity
■■TSI 8475
• 0.05 to 2.5m/s velocity range
• +/- 1.0% full scale or 3% of reading accuracy
• Omnidirectional 360° sensor
RELATIVE HUMIDITY AND TEMPERATURE TRANSMITTERS / DATA LOGGERS
HMT120 - HMT130 HUMIDITY AND
TEMPERATURE TRANSMITTERS
HMW90 SERIES HUMICAP HUMIDITY AND
TEMPERATURE TRANSMITTERS
437
255
FROM $
561
FROM $
The Vaisala HUMICAP® Humidity and
Temperature Transmitters HMT120 and
HMT130 are designed for humidity and
temperature monitoring in cleanrooms and are
also suitable for demanding HVAC and light
industrial applications.
The wall-mounted Vaisala HMW90 Series
HUMICAP® Humidity and Temperature
Transmitters measure relative humidity and
temperature in indoor environments, where
high accuracy, stability, and reliable operation
are required.
General Features
General Features
• Vaisala HUMICAP® technology with humidity
sensor HUMICAP® 180R
• Humidity parameter options: relative humidity,
dewpoint/frost point, wet bulb temperature,
enthalpy, absolute humidity, mixing ratio,
vapour pressure, and saturation vapour
pressure
• 2-wire loop-powered or 3-wire voltage output
configurations
• Interchangeable probe (easy field calibration)
• Accurate and reliable
• Resistant to dust and most chemicals
• Optional LCD display
• USB cable available for a PC connection for
maintenance
• Wall-mounted or with a remote probe
• Constant output probe available
• Can be mounted outdoors using a Vaisala
installation kit and the Vaisala Radiation Shield
DTR504A
• Enclosure IP65
• 3-point NIST traceable calibration (certificate
included)
• Both analog and digital output
• Easy installation, configuration and field
adjustment
• Humidity parameter options: relative humidity,
dew point, mixing ratio, enthalpy, wet bulb
temperature, dew pointed pression, and
absolute humidity
• Full 0 to 100%RH measurement range
• Up to ±1.7%RH accuracy
• User exchangeable humidity and
temperature module
• NIST traceable calibration(certificate
included)
• Available in four colours
26
HMD60Y AND HMD70Y HUMIDITY AND
TEMPERATURE TRANSMITTERS
Options
■■TEMPERATURE ONLY
FROM $255
■■HUMIDITY & TEMP.
FROM $400
kenelec.com.au
$
The duct mounted Vaisala HUMICAP®
Humidity and Temperature Transmitters
HMD60y and HMD70y are designed for
monitoring relative humidity and temperature
in building energy management systems. The
combination of high accuracy, stability and
reliable operation, make these products the
ideal choice for demanding applications.
General Features
• Full 0 to 100 %RH measurement
• Accuracy up to ±2 %RH
• True two-wire transmitters with 4 to 20 mA
loop powered output (HMD60)
• Selectable signal output of 0 to 1 V, 0 to 5 V
or 0 to 10 V (HMD70) with optional current
module also 0 to 20 mA (HMD70)
• Vaisala HUMICAP® Sensor for excellent
accuracy and long-term stability, negligible
hysteresis and resistance to dust and most
chemicals.
• Temperature compensated
• IP65 (NEMA 4) housing
• Also available as temperature only transmitters
HMD 60T/70T
• NIST traceable calibration (certificate included)
Options
■■TEMPERATURE ONLY
FROM $408
■■RELATIVE HUM. & TEMP. FROM $561
1300 73 22 33 / [email protected]
INDUSTRIAL TRANSMITTERS
RELATIVE HUMIDITY AND TEMPERATURE TRANSMITTERS / DATA LOGGERS
HMDW110 HUMIDITY AND TEMPERATURE TRANSMITTER
General Features
277
FROM $
Vaisala HUMICAP® Humidity and Temperature Transmitter Series
HMDW110 measure relative humidity and temperature in multiple HVAC
applications. The series includes transmitters for duct mounting, IP65classified wall transmitters, and outdoor transmitters with integrated
radiation shields.
• Accurate humidity and temperature transmitters for measurements in
HVAC and cleanroom applications
• Outdoor transmitter with professional-grade radiation shield
• Proven HUMICAP® 180R sensor for superior long-term stability
• ±2 %RH accuracy
• 3-point NIST traceable calibration (certificate included)
• On-site calibration with HM70 Hand-Held Meter or PC connection
• Current output (4 to 20 mA)
• Default output parameters are relative humidity and temperature.
Dew point temperature, wet bulb temperature, and enthalpy outputs
selectable with a PC connection.
HMDW80 SERIES HUMIDITY AND TEMPERATURE TRANSMITTER
General Features
80
FROM $
Vaisala INTERCAP® Humidity and Temperature Transmitter Humidity and
temperature in various building automation applications. Transmitters
combine easy installation and reliable operation with a low requirement
for maintenance. The versatile HMDW80 series includes transmitters for
wall and duct mounting, IP65-classified transmitters for humid areas,
and transmitters with a radiation shield for outdoor use. It also includes
temperature-only transmitters and transmitters with an optional display.
• Reliable transmitters for basic HVAC humidity measurements
• ±3.0 %RH accuracy
• Full 0 to 100 %RH measurement mrange
• Optimized for easy installation and low maintenance
• User exchangeable INTERCAP® sensor for easy field replacement
• Output parameters: relative humidity and temperature with optional dew
point temperature, wet bulb temperature and enthalpy parameters
• UL- V0 flammability rating
• Typical installation locations - ventilation ducts, walls, wash-down areas,
outdoor locations
Options
■■TEMPERATURE ONLY
FROM $80
■■RELATIVE HUMIDITY & TEMPERATURE
FROM $109
VAISALA MID-RANGE DATA LOGGERS FOR TEMPERATURE, HUMIDITY & CONTACT CHANNEL MEASUREMENT
Vaisala’s Mid-Range data loggers are designed
for applications where speed and economy
are critical. The MR loggers can be used
with Vaisala software to monitor and analyse
environmental data and provide presentationquality records that are easily exported to PDF
and spreadsheets.
Connectivity options include USB, wireless,
and Power over Ethernet with a vNet PoE
network interface. When MR loggers are
used with vNet PoE device, installation takes
minutes. With the vNet device, loggers are
automatically identified on your network by the
software.
472
FROM $
Vaisala’s Mid-Range loggers are designed for
applications including:
• Drug Discovery, R&D
• Early Phase Clinical Trials
• Blood & Tissue Banks
• Hospitals & Pharmacies
• Nutraceutical Manufacturing
• Food & Dietary Supplement Applications
• Aerospace
• Semiconductors
• Museums & Archives
General Features
• Interface via RS232, USB, WiFi, Ethernet and
vNet PoE
• Sampling rates from 10 seconds to once a day
• Power Source – internal 10-year lithium battery
• Size 85mm x 59mm x 26mm &
weighs only 76g
• Mounting via magnetic strips
• Logging capacity 48,000 (DL1000MR) to
122,000 (DL2000MR)
• Require Vaisala software vLog SP to
download data
Options
■■DL1000MR - 1 INTERNAL TEMP CHANNEL
■■DL1016MR - 2 CHANNEL TEMP WITH
PROBES
■■DL1016MRB - 2 CHANNEL WITH 1 TEMP
PROBE, AND 1 CONTACT INPUT
■■DL1416MR - 4 CHANNEL TEMP W/
PROBES
■■DL1416MRB - 2 CHANNEL TEMP W/
PROBES & 2 CONTACT INPUTS
■■DL2000MR - 2 INTERNAL CHANNELS
TEMP AND RH
1300 73 22 33 / [email protected]
kenelec.com.au
27
INDUSTRIAL TRANSMITTERS
VAISALA VLOG SP: TREND AND ANALYSIS SOFTWARE (SW-SP-USPD)
Vaisala vLog SP is a powerful, easy-to-use software for downloading,
analyzing and reporting information from Vaisala SP data loggers. This
software is used in standalone data logging applications with Vaisala’s
non-validatable DL-series data loggers. vLog SP includes graphing and
reporting functions that are ideal for use in calibration labs.
General Features
550
FROM $
• Quick Visual of Results - Horizontal bars that move automatically with
min, max, and avg values. User-selectable color indicators for each
value, units, and detailed label creation
• Customizable Reports - Manual or automatic scaling, multiple Y-axes,
selectable decimal place precision, temperature unit display options
(°C or °F), adjustable International date/time formats, and text area for
signatures and detailed annotations. See sample report
• Security Control - Three levels of security to control access: Windows,
domain level, and local account authentication
• Time Saving Batch Setup - Quickly apply settings from one logger to
others, including start/stop times, sample intervals, logger and channel
descriptions, and flags
• Easy Data Transfer - Copy and paste or export graphs, .TXT and .CSV
files into other Windows and/or database applications
CO2 TRANSMITTERS
GMW90 SERIES CARBOCAP CARBON DIOXIDE, TEMPERATURE, AND HUMIDITY TRANSMITTER
The Vaisala GMW90 Series CARBOCAP®
Carbon Dioxide, Temperature, and Humidity
Transmitters are based on new measurement
technology for improved reliability and stability.
With the new technology, the transmitter’s
inspection interval is extended to five years.
Designed for demand controlled ventilation,
these transmitters measure carbon dioxide
and temperature, with the option for humidity
measurements. The instruments come with a
calibration certificate that meets traceability
and compliance requirements.
General Features
The GMD20 series transmitters can be used
independently, or incorporated into building
energy management systems. The series
consists of duct mount model GMD20/D.
Version D has a display. The two sizes in the
wall-mount series make them easy to install for
most standard junction boxes. The duct units’
compact sensor head design requires only
a small hole in a ventilation duct, minimizing
the risk of leaking gaskets and measurement
errors. In addition to the standard 0 to 20
mA, 4 to 20 mA and 0 to 10 V outputs, there
are three other options: two LonWorks®
interfaces and a relay output. The relay output
is standard with the display units.
General Features
444
FROM $
• Measured parameters: carbon dioxide,
temperature, and humidity (optional)
• Superior long-term stability with the next
generation Vaisala CARBOCAP® sensor
• Accurate temperature and humidity
measurements in a three-parameter
instrument due to the low-power microglow
infrared source
• Quick and easy installation and maintenance
• Calibrated, user-exchange able modules for
carbon dioxide, temperature and humidity
• 3-point traceable CO2 calibration (certification
included)
• Both analog and digital communication
(BACnet/Modbus)
GMD20 SERIES DUCT MOUNT TRANSMITTER
EASY TO
INSTALL
NO MAINTENANCE
349
FROM $
5 YEAR RECOMMENDED
CALIBRATION INTERVAL
28
kenelec.com.au
• Measurement range 0 to 2000 ppm CO2
(nominal; can be calibrated for other ranges:
0 to 5000 ppm, 0 to 10,000 ppm, 0 to 20,000
ppm)
• Accuracy (including repeatability, non-linearity
and calibration uncertainty) ± (2 % of range +
2% of reading)
• Long-term stability <±5 % of range / 5 years
• Response time (63%) 1 minute
• Warm-up time 1 minute, 15 minutes full specifi
cations
• Temperature Measurement (Optional With
GMW21)
• Output signal 0 to 10V
• Corresponding measurement range 0 to +50
°C (+32 to +122 °F)
• Accuracy at +25 °C ±0.5 °C (0.9 °F)
• Warm up time 30 min
• Temperature sensor Semiconductor IC
1300 73 22 33 / [email protected]
INDUSTRIAL TRANSMITTERS
PRESSURA ROOM PRESSURE MONITORS
TSI PRESSURATM
Monitor and change high & low pressure rooms
TSI PresSura™ Healthcare Room Pressure products help
provide safety in isolation rooms, operating rooms, and other
specialized spaces, by continually measuring room pressure
and indicating room conditions. The PresSura products assist
hospitals and engineers to comply with relevant ASHRAE,
AIA, CDC and USP standards. TSI’s unique thermal-based
pressure sensor offers the most precise, accurate, and
stable measurement. Over 50,000 hospital rooms in leading
healthcare facilities rely on TSI products every day to provide
effective 24/7 monitoring.
Safety & Compliance
Whether designing or managing healthcare facilities, you
understand that safety, compliance and infection prevention
are crucial considerations. PresSura Room Pressure products
provide the confidence you need to comply with major
industry guidelines and regulations in order to ensure and
document safe environments. Specifically designed for
hospital applications, PresSura Room Pressure Products
offer:
• Best-in-class measurement of low pressures to help monitor
critical pressurized rooms
• Simplified compliance with relevant parts of the following
guidelines and regulations
• ANSI/ASHRAE/ASHE Standard 170-2008, ventilation of health
care facilities
• The Facility Guidelines Institute (FGI), 2010 Guidelines for
Design and Construction of Health Care Facilities
• Centers for Disease Control (CDC), Guidelines for
Environmental Infection Control in Health Care Facilities
• Seamless integration into Building Automations Systems
(BAS) where data can be logged and tracked over long
periods of time
• Low maintenance and easy calibration
Through-the-Wall Sensor
Nurses Station Monitor
General Features
Options
• Both monitor and control units available
• Includes room pressure, ventilation and
temperature controls
• Supports high accuracy through-thewall pressure sensor based on thermal
anemometry
• Provides best-in-class accuracy, resolution
and stability
• Also supports pressure transducer input
• Suitable for Airborne Infection Isolation (AII)
rooms and Protective Environment (PE) rooms
• Positive / negative / no Isolation room modes
• Changeable via keyswitch and password
protected touchscreen
• Supports visual and audible alarms
• Programmable alarms delays to avoid
nuisance alarms and alarm mute feature.
• Standard communication options supported
are Modbus & BACnet MS/TP
• LonWorks available as an option
• Accepts flow, door switch, temperature and
relative humidity inputs
• Supports 0 – 10v / 4-20mA analogue output
and alarm relay contacts
• TSI Nurses Station Monitor can display status
of up to 8 rooms on 1 screen
Monitors – Single room
Controllers
■■RPM10
$1,667
• PresSura Standard Room Pressure Monitor
with Through-the-Wall Sensor
■■RPC30
$2,370
• PresSura Premium Room Pressure
Controller with Through-The-Wall Sensor
■■RPM10-PT
$1,282
• PresSura Standard Room Pressure Monitor
for use with Pressure Transducer Sensor
(not incl.)
■■RPC30-LON
$2,653
• PresSura Premium Room Pressure
Controller with LONworks Communications
and Through-the-Wall Sensor
Monitors – Multiple rooms (Up to 3)
■■RMP20
$1,950
• PresSura Premium Room Pressure Monitor
with Through-the-Wall Sensor
■■RPM20-LON
$2,232
• PresSura Premium Room Pressure Monitor
with LONworks Communications and
Through-the-Wall Sensor
■■RPC30-PT-LON
$2,260
• PresSura Premium Room Pressure
Controller with LONworks Communications.
For use with Pressure Transducer (not
included)
■■RPM20-PT
$1,557
• PresSura Premium Room Pressure Monitor
for use with Pressure Transducer (not
included)
Pressure Transducers
■■RPM20-PT-LON
$1,847
• PresSura Premium Room Pressure Monitor
with LONworks Communications for use
with Pressure Transducer (not included)
■■TSI 801917 PRESSURE TRANSDUCER$721
• +- 0.25 in H2O (+/- 62.3 Pa)
Other options available include keyswitches, door switch and remote visual alarms.
1300 73 22 33 / [email protected]
■■RPC30-PT
$1,984
• PresSura Premium Room Pressure
Controller for use with Pressure Transducer
(not included)
kenelec.com.au
■■TSI 801916 PRESSURE TRANSDUCER $721
• +- 0.1 in H2O (+/- 24.9Pa)
Nurses Station Monitor
■■NSD8 –
NURSES STATION MONITOR $2,859
29
INDUSTRIAL TRANSMITTERS
REFRIGERANT TRANSMITTERS
CHOOSE YOUR SENSOR FOR YOUR TRANSMITTER - CALL KENELEC FOR ASSISTANCE
Ensure that all required products are included to make a complete system e.g:
• LPT and LPT-A transmitters work with PDC Controllers
• PET transmitters work with BACnet control devices
✓
Available
Unavailable
GEM-II Multi-Purpose
Gas Detector
Solid State / Semi-Conductor Sensor
PET BACnet® Transmitter
ART Infrared Refrigerant
Transmitter
LPT-A Analogue Low
Power Transmitter
0-1032ppm
0-2000ppm
✓
✓
✓
✓
0-2000ppm
✓
✓
Refrigerant (R422A)
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Refrigerant (R422D)
✓
✓
Refrigerant (R507A)
✓
✓
Refrigerant (R22)
Refrigerant (R123)
Refrigerant (R134A)
Refrigerant (R402A)
Refrigerant (R404A)
Refrigerant (R407C)
Refrigerant (R410A)
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Refrigerant (R407F)
Refrigerant (R422D)
Refrigerant (R427A)
Refrigerant (HFO1234YF)
Refrigerant (HFO1234ZE)
✓
GAS DETECTION CONTROLLERS - CONNECT THE SENSOR YOU NEED
PDC MULTI-CHANNEL CONTROLLER
GEM-II ANALOG MULTI-PURPOSE
REFRIGERANT TRANSMITTER
PET BACNET DIGITAL
REFRIGERANT TRANSMITTER
INCORPORATES
“SMART” SENSOR
TECHNOLOGY
Discontinued
from Dec 2015
2,260
FROM $
Discontinued
from Dec 2015
INTEGRATE TO
YOUR BUILDING
MANAGEMENT
SYSTEM
1,320
937
FROM $
FROM $
General Features
General Features
General Features
• For up to 8 analog transmitters and up to 120
digital transmitters.
• Eight 5-amp SPDT relays
• Optional BACnet® output module
• Audible & visual alarms
• LCD Display
• Optional Watertight enclosure
• Single or dual channel
• Two 5-amp SPDT relays
• Integral plug-and-play “smart” sensors or
remote sensors
• 4-20mA linear output signal
• LED light indicators
• Optional Water tight enclosure
• Digital transmitter
• Single or dual gas sensor
• Includes temperature sensor
• Tri-color LED light indicator
• Communicates via BACnet protocol
MS/TP
• Thermal resetting fuse
ART INFRARED REFRIGERANT
TRANSMITTER
LPT-A LOW POWER REFRIGERANT TRANSMITTER WITH LCD
General Features
LOW
POWER, LOW
COST WIDE
RANGE OF GAS
SENSORS
931
FROM $
30
• Analog transmitter
• Single Sensor; supports a wide range of sensors including electrochemical, solid state and catalytic (refer to table)
• Linear 4-20mA or 0-10 volt output signal
• Graphic LCD display (user selectable function)
• 1 dry contact relay, 30 volt 2 amp maximum
• Standard water/dust tight, corrosion enclosure (drip proof), IP54 Certified
• Audible alarm
• Automated calibration procedure
• Optional splash guard, heater, and logger
kenelec.com.au
CHILLER
ROOM OR
FREEZER
OPTION
3,630
FROM $
General Features
• Use accurate infrared sensors
• Detect a wide range of refrigerants
• Audible & visible alarms
• Standalone or connect to BMS
1300 73 22 33 / [email protected]
INDUSTRIAL TRANSMITTERS
INDUSTRIAL GAS TRANSMITTERS
CHOOSE YOUR SENSOR FOR YOUR TRANSMITTER - CALL KENELEC FOR ASSISTANCE
Ensure that all required products are included to make a complete system e.g:
AS
LP
T
Po -A
w An
er al
Tr og
an ue
sm L
itt ow
er
D
ST
Tr D
an ig
sm ita
itt l
er
g
An
T
Tr -I I
an nd
sm us
itt tria
er l
T
(C -IS
O C
2) a
Tr rbo
an n
sm D
itt iox
er ide
LP
T
Tr Lo
an w
sm P
itt ow
er er
al
o
)
2
AS
Unavailable
PE
T
Tr BA
an C
sm ne
itt t ®
er
Available
G
EM
Sa M
m R
pl I O
in x
g yg
Sy e
st n (
em O
✓
G
EM
G -I
as I M
D u
et lti
ec -P
to ur
r po
se
• LPT and LPT-A transmitters work with PDC Controllers
• DST transmitters work only with PDC controllers
• PET transmitters work with BACnet control devices
Sensors
✓
✓
Ammonia (NH3)
✓
Carbon monoxide (CO)
✓
Carbon Dioxide (CO2)
Chlorine (Cl2)
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Ethylene (C2H4)
Ethylene oxide (C2H4O)
✓
✓
Formaldehyde (CH2O)
Hydrogen (H2)
✓
✓
Hydrogen sulphide (H2S)
Hydrogen chloride (HCl)
Hydrogen cyanide (HCN)
✓
✓
Methane (CH4)
✓
✓
✓
Sulphur dioxide (SO2)
✓
✓
✓
✓
✓
✓
✓
✓
✓
Combustibles
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Nitrogen dioxide (NO2)
Nitric oxide (NO)
Oxygen (O2)
✓
✓
✓
✓
✓
Ozone (O3)
Phosphine (PH3)
Silane (SiH4)
Hydrogen (H2)
Methane (CH4)
Propane (C3H8)
TVOC’s
✓
Nitrous Oxide (N2O)
✓
✓
✓
✓
✓
✓
✓
✓
GAS DETECTION CONTROLLERS - CONNECT THE SENSOR YOU NEED
PDC MULTI-CHANNEL CONTROLLER
GEM-II ANALOG MULTI
PURPOSE TRANSMITTER
DST DIGITAL TRANSMITTER
INCORPORATES
“SMART”
SENSOR
TECHNOLOGY
Discontinued
from Dec 2015
Discontinued
from Dec 2015
2,260
734
FROM $
1,065
FROM $
FROM $
General Features
General Features
General Features
• For up to 8 analog transmitters and up to 120
digital transmitters.
• Up to 32 channels on base controller,
expandable to 128 channels
• RS485 communication with digital transmitters
• Eight 5-amp SPDT relays
• Optional analog inputs (up to eight)
• Optional BACnet® output module
• Audible & visual alarms
• LCD Display
• Optional Watertight enclosure
• Detects a wide range of gases, including solid
state and electrochemical
• Designed for use with the PDC controller
• RS485 digital output signal
• RoHS compliant circuit boards
• Configured for four wire multidrop wiring
• Thermal resetting fuse
• LED indication for Power, Fail and Alarm
• Single or dual channel
• Two 5-amp SPDT relays
• Integral plug-and-play “smart” sensors or
remote sensors
• 4-20mA linear output signal
• Analog Transmitter
• CSA, UL & C-Tick certification
• LED light indicators
• Optional 4 digit display
• Optional Water tight enclosure
1300 73 22 33 / [email protected]
kenelec.com.au
31
INDUSTRIAL TRANSMITTERS
GEM MRI OXYGEN SAMPLING
TRANSMITTER
LPT-A LOW POWER TRANSMITTER
WITH LCD
PET BACNET DIGITAL TRANSMITTER
INTEGRATE
TO YOUR
BUILDING
MANAGEMENT
SYSTEM
LOW POWER,
LOW COST WIDE
RANGE OF GAS
SENSORS
Discontinued
from Dec 2015
867
5,038
GEM-MRI is a self-contained oxygen (O2)
monitoring system developed for Magnetic
Resonance Imaging (MRI) room applications
for hospitals and clinics.
General Features
• Sample draw pump
• Two 5-amp SPDT relay
• Dry contact relays for control of remote
devices
• Analog output (4-20mA)
• Audible alarm
• Adjustable flow meter
General Features
• Analog transmitter
• Single Sensor; supports a wide range of
sensors including electro-chemical, solid state
and catalytic (refer to table)
• 3-wire VDC or 4-wire VAC power
• 24 volt DC or AC power (nominal)
• Linear 4-20mA or 0-10 volt output signal
• Graphic LCD display (user selectable function)
• 1 dry contact relay, 30 volt 2 amp maximum
• Standard water/dust tight, corrosion enclosure
(drip proof)
• Audible alarm
• Automated calibration procedure
• Optional splash guard, heater, and logger
• Digital transmitter
• Single or dual gas sensor
• Includes temperature sensor
• Tri-color LED light indicator
• Communicates via BACnet protocol MS/TP.
• Thermal resetting fuse
AST-I INDUSTRIAL ANALOG TRANSMITTER
General Features
General Features
• Analog transmitter
• Single sensor: carbon monoxide (CO) 0-200
PPM or
nitrogen dioxide (NO2) 0-10 PPM
• Linear 4-20 mA output
• 2-wire loop, 3-wire VDC or 4-wire VAC power
• Automated calibration
• Easy installation
• Dual temperature compensated pyroelectric
infrared detectors
• Lower power consumption
• Target gases include CO2 (0-5, 0-20,0-100%)
and Methane CH4 (0-100% of volume or
0-100% LEL)
• Water/dust tight/corrosion resistant
polycarbonate enclosure
• Linear 4-20mA output
• Measurement ranges from 0-1000 PPM
INFRARED
GAS
DETECTORS
774
FROM $
AST-IS STANDARD CO2 TRANSMITTER
AESTHETIC
HOUSING
FOR OFFICE &
RESIDENTIAL
USE.
32
FROM $
General Features
LPT LOW POWER TRANSMITTER
LOW POWER,
LOW COST –
GREAT FOR BULK
PURCHASES!
731
FROM $
$
3,358
$
AST-IS INDUSTRIAL CO2 TRANSMITTER
General Features
General Features
• Attractive PVC enclosures ideal for indoor use
eg, residential, schools & offices
• Linear 4-20mA or 0-10VDC output
• Single internal infrared CO2 sensor, 0 - 2,000
ppm
• Optional LCD Display
• Optional temperature display
• Optional audible alarm
• Optional relay
• Maintenance free, lifetime calibration
• Duct Mount option in IP54 enclosure, Wall
Mount option in IP65 enclosure
• Linear 4-20mA or 0-10VDC output
• Single internal infrared CO2 sensor, 0 - 2,000
ppm OR 0-4%
• Optional LCD Display
• Optional relay
• Maintenance free, lifetime calibration
739
FROM $
INFRARED CO2
DETECTOR
kenelec.com.au
917
FROM $
1300 73 22 33 / [email protected]
MASS FLOW METERS (AIR & GAS)
MASS FLOW METERS (AIR & GAS)
MASS FLOW METERS
The TSI Mass Flowmeters can be used for a multitude of gas flow
measurement applications. Whether measuring gas flows in a laboratory
or manufacturing setting, TSI general purpose mass flowmeters provide
accurate results with multiple data output options. The display versions
come complete with accessories making setup and operation fast and
convenient.
The TSI mass flowmeters are specified as two percent of flow rate
reading. One TSI mass flow meter covers the same range as three
percent (or more) of full scale devices, with better accuracy at most
points. Fast four millisecond response ensures accuracy in fluctuating
flows. This fast response time of the TSI mass flowmeter is ideal for
closed-loop control systems and integrated volume measurements. Low
pressure drop of the TSI mass flowmeter minimizes flow circuit back
pressure and its impact on the system.
General Features
• TSI 4140 Low Flow series (0.01 – 20 std L/Min)
• TSI 4040 High Flow series (0 – 200 & 0 – 300 std L/Min)
• 4 millisecond flow response
• High accuracy ±2% of reading
• High turndown ratio
• Low pressure drop
• Versions available with or without display
• Convenient 0 – 10V DC analog output of flow rate
• Versatile RS232 digital output of flow rate, volume, pressure, temperature
• Built-in temperature and pressure compensation
• NIST-traceable calibration certificate included at no additional cost
TSI LOW FLOW - 4140 SERIES
TSI HIGH FLOW - 4040 SERIES
1,201
1,295
FROM $
FROM $
Low Flow – 4140 Series
High Flow – 4040 Series
Model
4140
41403
4143
41433
4040
Gas Calibration
Air, O2, N2
Air, O2, N2, N2O
Air, O2, N2
Air, O2, N2, N2O
Air, O2, N2, Air/O2 Mixture
Inlet/Outlet Diameter
0.25” (6.4 mm)
Flow
Measurement
Range
Accuracy — Air
and O2
0.375” (9.53 mm)
4043
4045
22 mm ISO
tapered
0.50” (12.7 mm)
0.75” (19.1 mm)
0.01-20 Std L/min
0-300 Std L/min
0-200 Std L/min
0-300 Std L/min
±2% of reading or 0.005 Std L/min, whichever is greater
±2% of reading or 0.05 Std L/min, whichever is greater
Accuracy — N2
±3% of reading or 0.010 Std L/min, whichever is greater
±3% of reading or 0.1 Std L/min, whichever is greater
Accuracy — Air and
O2 mixture
N/A
±3% of reading or 0.1 Std L/min, whichever is greater
Accuracy — N2O
N/A
Response
N/A
±3% of reading
or 0.010 Std L/
min, whichever
is greater
±3% of reading
or 0.010 Std L/
min, whichever
is greater
N/A
4 ms to 63% of full scale flow
4 ms to 63% of full scale flow
LCD Display Units
L/min, Std L/min, cm3/min, Std cm3/min
L/min, Std L/min
Overall Dimensions
5” x 2” x 1.25” (127 mm x 49 mm x 32 mm)
7.2” x 2.5” x 2.1” (182 x 63 x 53 mm)
Volume*
Range
0.01 – 99.9 liters
0.01 – 99.9 liters
Measurement
Accuracy
±2% of reading (see Operator’s Manual for additional details)
±2% of reading (see Operator’s Manual for additional
details)
Pressure
Range
50-199 kPa absolute
50-199 kPa absolute
Measurement
Accuracy
±1 kPa
±1 kPa
Response
<4 ms to 63% of final value for step charge
<4 ms to 63% of final value for step charge
Temperature
Range
0-50°C
0-50°C
Measurement
Accuracy
±1°C at flow greater than 1 Std L/min
±1°C at flow greater than 1 Std L/min
Response
<75 ms to 63% of final value for step change
<75 ms to 63% of final value for step change
Analog
0-10 VDC flow only, zero and span adjustable via RS232
0-10 VDC flow only, zero and span adjustable via
RS232
Digital
RS232
RS232
7.5 VDC ±1.5 V, 300 mA max
7.5 VDC ±1.5 V, 300 mA max
Outputs
DC Power Input
1300 73 22 33 / [email protected]
kenelec.com.au
33
MASS FLOW METERS (AIR & GAS)
TSI LOW FLOW - 4120 SERIES - NO DISPLAY
TSI HIGH FLOW - 4020 SERIES - NO DISPLAY
520
546
FROM $
FROM $
Low Flow – 4120 Series
Model
High Flow – 4020 Series
4121 Series
Gas Calibration
4122 Series
4021 Series
4024 Series
4121
41212
41216
41221
41222
41226
40211
40212
40241
40242
40246
Air
02
N2
Air
O2
N2
Air
O2
Air
O2
N2
Inlet/Outlet Diameter
0.25” (6.4 mm)
Flow
Measurement
Range
0.01-20 Std L/min
0-300 Std L/min
Accuracy —
Air and O2
±2% of reading or 0.005 Std L/min, whichever is greater
±2% of reading or 0.05 Std L/min, whichever is greater
Accuracy — N2
±3% of reading or 0.010 Std L/min, whichever is greater
±3% of reading or 0.1 Std L/min, whichever is greater
Response
4 ms to 63% of full scale flow
4 ms to 63% of full scale flow
Overall Dimensions
5” x 2” x 1.1” (127 mm x 49 mm x 29 mm)
7.2” x 2.5” x 1.5” (182 x 63 x 38 mm)
Pressure Measurement
N/A
N/A
Temperature
Measurement
Range
0-50°C
0-50°C
Accuracy
±1°C at flow greater than 1 Std L/min
±1°C at flow greater than 1 Std L/min
Response
<75 ms to 63% of final value for step change
<75 ms to 63% of final value for step change
Analog
0-4 VDC flow only, zero and span adjustable via RS232
0-4 VDC flow only, zero and span adjustable via RS232
Digital
Outputs
0.375” (9.53 mm)
22 mm ISO tapered
0.75” (19.1 mm)
RS232
RS232
DC Power Input (User Supplied)
5.0 VDC ±0.25 V, 300 mA max
5.0 VDC ±0.25 V, 300 mA max
Recommended Filtration
HEPA-grade
HEPA-grade
PRIMARY CALIBRATORS
TSI offers two Primary Calibrator Models for
calibrating pumps and any other air sampling
instruments that draw an active air sample.
These small, portable, battery-operated units
are lightweight and easy to use. Volumetric
flow rate is displayed continuously, making
real-time pump adjustment, calibration
and periodic flow checks fast and easy.
These Primary Calibrators are temperaturecompensated and pressure-corrected to
calculate volumetric flow rate at an accuracy
within 2% of reading.
General Features:
• Provides continuous real-time volumetric flow rate readings, so pump adjustment and calibration is
fast and easy
• Battery powered, compact and lightweight
• Field portable—use the same primary calibrator for adjustment, calibration and periodic checks
• Comes with a NIST traceable calibration certificate
• Kits come complete and are ready to use
• Model 4146 flow measurement range of 0.01 to 20 lpm
• Model 4140 flow measurement range 2.5 to 300 lpm
• Each Primary Calibrator Model Includes: Flowmeter, soft carrying case, battery pack, (6) AA Alkaline
batteries, connectors, tubing, dampening chamber module (4146 only), battery pack lugs, 2-year
warranty, user guide and NIST certificate of calibration
TSI 4046 PRIMARY CALIBRATOR KIT RANGE – 2.5 TO 300 LPM
TSI 4146 PRIMARY CALIBRATOR KIT RANGE – 0.01 TO 20 LPM
2,091
$
34
kenelec.com.au
1,717
$
1300 73 22 33 / [email protected]
Meet
TEAM KENELEC:
“Sharing our knowledge and
experience to find innovative
solutions for your business.”
“Our goal at Kenelec Scientific is to
have service that is not just great
but legendary.”
“We tailor complete solutions
according to your business needs
and preferences, employing
the best technologies – Solving
today’s concern with tomorrow’s
technology.”
“Our focus is to deliver support
services that ‘measure up’ beyond
your expectations.”
ADDITIONAL SOLUTIONS
•Wide range of laboratory
testing
•Validation services
for pharmaceutical /
cleanroom industry
EXTENDED WARRANTY
PROGRAM NEEDS
•Warranty extension on top
of the already generous
manufacturer’s warranty
•Competitive rates
PROFESSIONAL
EDUCATION &
TRAINING NEEDS
•Wide range of courses enquire with us
•In-house, onsite and
online training available
•Certification provided
CALIBRATION NEEDS
•NATA Certification for
some products / National
Measurement Institute of
Australia traceable calibration
•Local calibration - cost
effective and quick turnaround
•World class calibration lab
•Experienced, fully qualified,
factory trained specialists
SERVICE & REPAIR NEEDS
•Local after sales service and support
•Quick turnaround
•Competitive rates
•Backed by warranty
RENTAL NEEDS
•Latest models at competitive rates
•Short and long term available
•Try before buying
•All units calibrated and fully
maintained
765 / HVAC / 14415 / JUL15
LABORATORY TESTING
& VALIDATION NEEDS
VISA, MASTERCARD, AMEX Accepted
Please note: the prices in this catalogue are provided as a guide only and are subject to change without notice.
Please check at time of purchase. Delivery cost and GST are not included. (4% +GST surcharge on AMEX)
NATIONAL FREECALL NO.
1300 73 22 33
[email protected]
www.kenelec.com.au
Australia & NZ Head Office
NSW Office
23 Redland Drive
Mitcham VIC 3132 Australia
Building 5, 49 Frenchs Forest Rd
Frenchs Forest NSW 2086 Australia
T +61 3 9873 1022 / F +61 3 9873 0200
T +61 2 8977 4017 / F +61 2 8977 4000
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement