Product Manual - HDMI Cable, HDMI Matrix, HDMI Adapters, HDMI

Product Manual - HDMI Cable, HDMI Matrix, HDMI Adapters, HDMI
Cablesson HDelity HDMI 3D
Extender Single CAT5/6
(Bi-directional IR)
User Manual
© All rights reserved - CABLESSON
© All rights reserved - CABLESSON
!
SAFETY AND NOTICE
TABLE OF CONTENT
The HDelity HDMI 3D Extender Single Cat5/6 (Bi-Directional IR) has been tested for conformance to safety
regulations and requirements, and has been certified for international use. However, like all electronic equipments,
the HDelity 3D Extender should be used with care. Please read and follow the safety instructions to protect yourself
from possible injury and to minimize the risk of damage to the unit.
Follow all instructions and warnings marked on this unit
●
Do not attempt to service this unit yourself, except where explained in this manual.
●
Provide proper ventilation and air circulation and do not use near water
●
Topic
Page No.
Introduction
1
Features
2
Specifications
3
Package Contents
4
Panel Description
●
Tramsmitting Unit
5
●
Recieving Unit
6
IR Extender
7
Keep those objects away that might damage the device and assure that the placement of this unit is on a
Connection Diagram
8
stable surface
Hardware Installation
9
HDMI
10
Warranty
11
●
Use only Power Adapter, Power Cords and Connection Cables designed for this unit
●
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
“We believe in creating
thoughtful products for you”
The Cablesson HDelity HDMI 3D Extender Single Cat5/6
Cablesson HDelity HDMI 3D EXTENDER SINGLE CAT5/6 (BI-DIRECTIONAL IR)
●
Support HDMI Deep Colour & Full 3D
●
Extends the transmission up to 50m (165ft) from the HDMI source at HD 1080i or 720p 24-bit
●
Extends the transmission up to 40m (130ft) from the HDMI source at Full HD 1080p 24-bit
●
Extends the transmission up to 20m (65ft) from the HDMI source at Full HD 1080p 36-bit
●
HDCP 1.1 compliant
●
Auto EDID feature
advanced 3D video format and therefore guarantees the highest
●
Minimizes the cable skew by adjustable 8-level equalization control
3D video compatibility on the market. With only one cost effective
●
Pure unaltered uncompressed 7.1ch digital HDMI over CAT-5/5e/6 cable transmission
CAT-5/5e/6 cable, users can readily extend HDTV sources from
●
DTS-HD and Dolby True-HD high bit rate audio support
DVD players, Blu-ray Disc player, PS3, PC, and any other kinds
●
Supports full frequency IR signal from 20KHz to 60KHz
of sources compliant with TMDS to distant display monitors
●
Bi-directional IR path
●
Allows cascading
●
Wall mounting housing design for easy and robust installation
●
Perfectly integrated with other HDMI over CAT5 series products
(Bi-Directional IR) boosts up your video/audio transmission
distance up to 50m (165ft) in HDTV 1080i format, 40m (130ft) in
HDTV 1080p format, and 20m (65ft) in HDTV 1080p with 36-bit
colour depth. The HDelity 3D Extender also supports the most
including HDMI or DVI enabled TV sets or LCD PC monitors.
With the advanced design for the latest HDMI technology, Deep
Colour video, DTS-HD Master Audio or Dolby True-HD audio,
and HDCP supports and compatibility are all further insured. This
flexibility makes HDCP compliant DVD players or PS3 transmit
utmost high quality video and audio with a greater distance at the
minimal cost, when integrating several components apart. In
addition, the Cablesson HDelity 3D Extender is also equipped
with Bi-directional IR pass-through path. This bonus feature
allows users to boost IR control distance up to 100m (330 ft) and
makes IR control possible through only single CAT-5/5e/6 cable
including HDMI signals. In addition, serial port offers the
convenient path for interactive application, such as touch panels.
The HDelity Extender includes two units: Transmitting unit (TX)
and Receiving unit (RX). The transmitting unit is used to capture
the input HDMI/DVI signals with IR control packets and carry the
signals via one cost effective CAT-5/5e/6 cable. The receiving
“A product that will
exceed your expectations”
unit is responsible for equalizing the transmitted HDMI signal and
reconstructing IR signals. The transmission distance between
the sending and receiving units can be up to 50m (165ft) at HD
720p or 1080i; or 40m (130ft) at Full HD 1080p. With an 8-level
equalization rotary control on the receiving unit, users can adjust
the equalization strength to the received HDMI signals
accordingly, and therefore optimize the transmission distance
between source and destination.
1 | Introduction
2 | Features
TECHNICAL SPECIFICATIONS
MECHANICAL SPECIFICATIONS
Cablesson HDelity 3D EXTENDER
Cablesson HDelity 3D EXTENDER
Technical
Cablesson HDelity
Role of usage
Transmitter [TX]
Receiver [RX]
HDMI compliance
HDMI Deep Colour & Full 3D
HDCP compliance
Yes
480i / 480p / 720p / 1080i / 1080p60
Audio support
Surround sound (up to 7.1ch) or Stereo Digital Audio
8-level digital control at RX
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
4-layer board [impedance control — differential 100Ω; single 50Ω]
IR pass-thru
Full-duplex bi-directional
RS-232 support
1x RJ45 + 1x 3.5mm
Output
1x RJ45 + 1x 3.5mm
1x HDMI + 1x 3.5mm
In/ Out
1x DIN9
1x DIN9
Controllable via IR pass-through from RX to TX and from TX to RX with IR extenders
Electro-optical characteristics: τ = 25° / Carrier frequency: 20-60kHz
Type A [19-pin female]
Min DIN connector
Power supply
5V 2A DC
Power consumption
1.5 Watts
Operation temperature
0~40°C [32~104°F]
-20~60°C [-4~140°F]
20~90% RH [no condensation]
●
1x Cablesson HDelity 3D Extender (Transmitter and Receiver)
●
2x DC 5V 2A wall wart
●
1x User Manual
●
1x IR blaster
●
1x IR receiver
DIN-9
WE/SS 8P8C with 2 LED indicators
3.5mm connector
Rotary control switch
Wall-mounting case with screws
PACKAGE CONTENTS
1x HDMI + 1x 3.5mm
HDMI connector
239g [8.4oz]
1000g [2.2 lbs]
IR Remote Control
Yes
Input
RJ45 connector
Fixedness
Relative humidity
PCB stack-up
270 x 175 x 80mm [10.6" x 6.9" x 3.1"]
450 x 370 x 300mm [1'6" x 1'3" x 11.8"]
Package
5 Volts [peak-to-peak, TTL]
[1] Human body model — ±19kV [air-gap discharge] & ±12kV [contact discharge]
[2] Core chipset — ±8kV
71 x 91 x 35mm [2.8" x 3.6" x 1.4"]
Model
Storage temperature
ESD protection
IR remote control
Weight
Surround sound (up to 7.1ch) or stereo digital audio
Signal Equalization
HDMI source control
Carton
Full HD (1080p) - 40m (130ft) [CAT.X]
HD (720p/1080i) - 50m (165ft) [CAT.X]
HDMI over UTP
transmission [24-bit]
Metal enclosure
Dimensions Model
(L x W x H) Package
Video support
Cablesson HDelity
Housing
Single-link 225MHz [6.75Gbps]
Video bandwidth
Audio support
Mechanical
Cablesson HDelity
IR Blaster & IR Receiver
EDID Mode selection
Signal level equalization
i
1) The claimed transmission distance here is subject to the
grade of installed cable(s), source device and display.
2) For over CAT5/COAX transmission, the cable(s) has to
be solid, not stranded. Any keystone jack along the
transmission path will kill the transmission performance
significantly!
3 | Specifications
4 | Package contents
PANEL DESCRIPTIONS FOR TRANSMITTING UNIT
MODE
PANEL DESCRIPTIONS FOR RECEIVING UNIT
HDMI IN
HDMI IN
1.
IR
IR
Receiver Blaster
Min
Max
3
1
HDMI OUT
4
2
Mode: 0 - EDID Full-HD([email protected]) - 24bit 2D video & 7.1ch audio
7
7.
Signal Level: Adjust the 8-level equalization control to the received HDMI signals. The HDMI signal level varies
shorten the product life significantly!
5 - EDID HD([email protected])([email protected])([email protected]) - 24bit 2D video & 2ch audio
6 - EDID Full-HD([email protected]) - 36bit 3D video & 2ch audio
7 - EDID learning mode
8.
HDMI OUT: Connect to an HDMI display with an HDMI male-male cable
9.
IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver
10. IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster
HDMI IN: Connects to an HDMI source with an HDMI male-male cable
IR Receiver: Infrared 3.5mm socket for plugging in the extension cable of IR receiver
DC 5V
11
DC 5V
5
HDMI Signal IN
12
Rear Panel
HDMI Signal OUT
6
5.
+5V DC: Connect to 5V DC power supply
6.
HDMI Signal IN: Plug-in a CAT-5/5e/6 cable that needs to be linked to the receiving unit
5 | Description
Front Panel
audio/video is playing normally. Inappropriate signal level setting may cause overpowering issue that would
4 - EDID HD([email protected])([email protected])([email protected]) - 24bit 2D video & 7.1ch audio
IR Blaster: Infrared 3.5mm socket for plugging in the extension cable of IR blaster
10
distance. Please adjust the signal level from MIN to MAX and stop turning the rotary switch whenever the
3 - EDID Full-HD([email protected]) - 36bit 2D video & 2ch audio
4.
8
from MAX (strongest) to MIN (weakest) for respective transmission length from longest possible range to short
2 - EDID Full-HD([email protected]) - 36bit 2D video & 7.1ch audio
3.
IR
IR
Receiver Blaster
9
Front Panel
1 - EDID Full-HD([email protected]) - 24bit 2D video & 2ch audio
2.
HDMI OUT
SIGNAL
LEVEL
Rear Panel
11. +5V DC: Connect to 5V DC power supply
12. HDMI Signal IN: Plug-in a CAT-5/5e/6 cable that needs to be linked to the receiving unit
6 | Description
IR EXTENDERS
CONNECTION DIAGRAM
Cablesson HDElity HDMI 3D Extender Single Cat5/6 (Bi-Directional IR)
Power Cable
HDMI Cable
CAT Cable
IR Cable
IR Blaster
IR Receiver
LCD/LED
Display Device
Any HD Source
IR SOCKETS
HDMI OUT
IR Blaster: Plug in the IR blaster to emit all IR command signals received from the IR receiver from the other end
MODE
to control the devices corresponding to the IR signals.
HDMI IN
SIGNAL
LEVEL
HDMI IN
HDMI IN
IR
IR
Receiver Blaster
Min
Max
HDMI OUT
HDMI OUT
IR
IR
Receiver Blaster
IR Receiver: Plug in the IR receiver here to receive all IR command signals from the IR remote controls of HDMI
source devices.
DC 5V
DEFINITION OF IR EARPHONE JACK
DC Power
Adapter
IR Blaster
IR Receiver
1. IR Signal
2. Grounding
!
Incorrect insertion of IR blaster and IR receiver to wrong
3.5mm infrared sockets may result in the failure of the IR
extenders. Please check carefully before plugging in the
IR extender to the respective IR sockets
7 | IR Extenders
1. IR Signal [20-60 kHz]
2. Grounding
3. Power
i
HDMI Signal OUT
DC 5V
HDMI Signal IN
DC Power
Adapter
tv
You can buy any IR extension cables in the market that
are compatible to the definition of the IR sockets for
the matrix if necessary for replacement use. However,
IR cables longer than 2m (6-ft) may not work.
8 | Connection Diagram
HARDWARE INSTALLATION
1.
Connect an HDMI or DVI source (such as a Blu-ray Disc player) to the transmitting unit
2.
Connect an HDMI or DVI display (such as a LCD TV) to the receiving unit
3.
Connect IR Blaster/Receiver to both TX and RX units
4.
Connect a CAT-5/5e/6 cable between the transmitting and receiving units
5.
Make sure this CAT-5/5e/6 cable is tightly connected and not loose
6.
Plug in 5V DC power supply unit to the power jack of the receiving unit
7.
Plug in 5V DC power supply unit to the power jack of the transmitting unit
8.
If you see flickering or blinking image on the display, please adjust the rotary control switch to improve the cable
HDMI
Type A (Receptacle) HDMI
skew. MAX stands for the strongest HDMI signal level for longest possible transmission length while MIN stands
Type A (Receptacle) HDMI
for the weakest HDMI signal level for short transmission length. Please adjust the signal level from MIN to MAX
and stop turning the rotary switch whenever the audio/video is playing normally. Inappropriate signal level setting
Pin 1
TMDS Data2+
Pin 8
TMDS Data0 Shield
Pin 15
SCL
may cause overpowering issue that would shorten the product life significantly!
Pin 2
TMDS Data2 Shield
Pin 9
TMDS Data0–
Pin 16
SDA
Pin 3
TMDS Data2–
Pin 10
TMDS Clock+
Pin 17
DDC/CEC Ground
Pin 4
TMDS Data1+
Pin 11
TMDS Clock Shield
Pin 18
+5 V Power
Pin 5
TMDS Data1 Shield
Pin 12
TMDS Cloc k–
Pin 19
Hot Plug Detect
Pin 6
TMDS Data1–
Pin 13
CEC
Pin 7
TMDS Data0+
Pin 14
Reserved (N.C. on device)
CAT5 [RJ-45]
RJ-45 Jack
Data Link TIA/EIA-568-B
Pin
9 | Hardware Installation
Colour
Function
1
W-O
TX0-
2
O
TX0+
3
W-G
TX1-
4
BL
TX2-
5
W-BL
TX2+
6
G
TX1+
7
W-BR
TXC-
8
BR
TXC+
10 | HDMI
LIMITED WARRANTY
The SELLER warrants the Cablesson HDElity HDMI 3D Extender Single Cat5/6 (Bi-Directional IR) free from defects in
the material and workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer. If this
product fails to be in good working order within 1 year warranty period, The SELLER, at its option, will either repair or
replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any unauthorized
modifications including static discharge and power surge. This warranty is offered by the SELLER for its BUYER with
direct transaction only. This warranty is void if the warranty seal on the metal housing is broken.
Unit that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect
at the time of repair. Such repairs are warranted for 90 days from the day of reshipment to the BUYER. If the unit is
delivered by mail, customers agree to insure the unit or assume the risk of loss or damage in transit. Under no
circumstances will a unit be accepted without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without limitations, any other implied
warranty or fitness or merchantability for any particular purpose, all of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Europe are responsible for shipping
charges to and from the SELLER. Cables and power adapters are limited to a 30 days warranty and must be free from
any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate. However, The SELLER assumes
no responsibility for any inaccuracies that may be contained in this manual. The SELLER will NOT be liable for direct,
indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages. Also, the technical information contained herein regarding the HDelity HDMI
3D Extender’s features and specifications is subject to change without further notice.
11 | Warranty
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement