advertisement
User Manual
SD/HD/3G-SDI 1 to 4 Distribution Amplifier
HD-SD-124
NOTE: The casing design is subject to change without notice.
This Distribution Amplifier distributes a single SDI video signal data to several video signal adapter amplification equipment of SDI signal at the same time. There is no signal loss in the switching process. It supports almost all video formats which is SMPTE compliant. It can also achieve up to 1080p@60Hz for Full HD output performance perfectly.
In professional application systems, it needs several digital display terminals to show the same
SDI video, and this device is specially designed for satisfying this type of requirement. It widely applies to surveillance, broadcast TV station, TV media, video conferences, electronic teaching, wired network areas, etc.
.. Features
• Support SD-SDI (270Mbps), HD-SDI (1.485Gbps) & 3G-SDI (2.97Gbps)
• Full HD video format
• Built-in Cable Equalizer, Re-clocker & Cable Driver
• Max. cable length (Belden 1694A): SD-SDI 400m/1300ft, HD-SDI 200m/600ft, 3G-SDI
140m/450ft
• Excellent SDI signal jitter suppression function
• Power supply and SDI signal format indicator
• Embedded ESD to protect the circuit
• 5V~24V DC
Copyright © 2012 by AAS Technology www.AAS.com.tw
SD-9
R201302-V18
Please read the Manual before attempting to use this product.
Specifications and appearance are subject to change without notice.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European
Union and other European countries with separate collection systems).
This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Caution ..
1. Handle this product with care
Avoid any shock or bumping of the product. Improper handling could damage the product. Do not handle the unit with wet hands. Provide proper ventilation and air circulation and do not use near water.
2. Requires a proper operating environment
This product is not waterproof and is designed for indoor use. The allowable temperature range for operation of this product is between -0°C~40°C / 32°F~104°F.
3. Check the power source voltage
The power source voltage should be within the specified range. (Product must meet the specifications).
4. Objects and liquid entry
Never push objects of any kind into this product as this may touch dangerous voltage points of short out parts that could result in a fire or electric shock. Never spill any kind of liquid on the product.
2
5. Cleaning
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
6. Servicing
Do not attempt to service this product by yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all service to qualified servicing personnel.
Package Contents ..
1. One (1) SDI to HDMI Converter
2. One (1) 12V DC 1Amp Power Adapter w/ Locking Power Connector
3. One (1) User Manual
For any returns, please include all components listed above with original packaging in Resalable
Condition. Absolutely No Returns will be accepted if any component is missing/damaged.
Application Diagram ..
* The distance depends on the quality of the SDI signal from the HD camera source and also the Coax
Cable & Connector
HD-SD-124
See page 6 for Important Notes about Cable and Connector for SDI HD Camera
Parts & Functions
Left Side View: Right Side View
..
3
Name Color Status
ON
Description
SDI signal is active
SDI Green
OFF SDI signal is inactive
POWER Green
ON
OFF
Power on
Power off
Hardware Installation ..
1. Check the power supply configuration and connect the correct voltage according to the power supply input requirements.
2. Use the standard HDMI cable and connect the HDMI source to HDMI input port.
3. Use SDI coaxial cable and connect the SDI output port with the display equipment.
4. Turn on the power switch.
Technical Specifications
Model
Input Interface
HD-SD-124
1x BNC SDI, HD-SDI, 3G-SDI
..
Input Signal Type
Support Input Format
Video Standard
SDI Signal Range
SDI Impedance
SDI Coupling Type
Max. Input Coax Length
HDMI/DVI Output Interface
Re-clocking
Power Supply
Power Consumption
Operating Temperature
Storage Temperature
Relative Humidity
Dimension
SD-SDI (270Mbps), HD-SDI (1.485Gbps), 3G-SDI
(2.97Gbps)
SD-SDI: 480i, 576i
HD-SDI: 720p24/25/30/50/59.94/60 all frame rate;
1080i all frame rate, 1035i all frame rate;
1080p all frame rate
3G-SDI: 1080p all frame rate
SMPTE 424M, SMPTE 292M and SMPTE 259M
ITU-R BT.601,ITU-R BT.1120
0.8V p-p
75 ohms
AC Coupling
Belden 1694A
SD-SDI 400m / 1300ft ; HD-SDI 200m / 600ft ;
3G-SDI 140m / 450ft
Nx BNC SD-SDI, HD-SDI, 3G-SDI
Auto Support 270Mbps/1.485Gbps/2.97Gbps
5V~24V DC, 2A w/ Locking Power Connector
10 Watts (max)
0°C ~ 40°C / 32°F ~ 104°F
-20°C ~ 60°C / -4°F ~140°F
20~90% RH (Non-condensation)
120 x 57 x 36 mm / 4.72 x 2.24 x 1.42 inches
*Specifications are subject to change without notice
4
Key Components
Components Made in USA for this product:
Name of Component
Multi-Rate SDI Adaptive Cable Equalizer
Multi-Rate SDI Automatic Reclocker
Multi-Rate Dual Slew-Rate Cable Driver
Manufacturer
Mindspeed & Gennum
Mindspeed & Gennum
Mindspeed & Gennum
Components Made in Taiwan for this product:
Name of Component
DC/DC Converter
Manufacturer
Richtek
..
Eye Diagram
SD-SDI Mode
*Key components are listed by the manufacturer and are subject to change without notice
..
HD-SDI Mode
5
3G-SDI Mode
IMPORTANT NOTE: Cable & Connector for SDI HD Camera
In order to achieve the Best Quality and Long Range coax cable run of up to 200m /
600ft, you will need:
1. Good Quality Cable: We suggest using RG6 Belden 1694A Low Loss Serial Digital coax cable because RG6 cables have better grounding than RG59 cables. RG6 is for Digital Signal and RG59 is for Analog Signal.
2. Good Quality BNC Connectors: Contact Plating Gold plated pins provide exceptional conductivity.
3. Good Quality Installation: Do not over cut the braid because it will affect the grounding. The image will have lines and noise.
Jacket Braid Shielding
Bare Copper
Conductor
Dielectric Contact Plating
Gold Plated Pin
6
Limited Warranty
LIMITED ONE (1) YEAR WARRANTY AND EXCLUSIONS www.AAS.com.tw
Related Products
..
Manufacturer warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Manufacturer is free of defects in materials and workmanship under normal and proper use for one (1) year from the purchase date. Manufacturer's only obligation is to correct such defects by repair or replacement, at its option, if within such one (1) year period the product is returned prepaid, with proof of purchase date, and a description of the problem. This warrant excludes and there is disclaimed liability for labor for removal of this product or reinstallation.
This warranty is voided if this product is installed improperly or in an improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or instructions. There are no other implied
warranties of any kind, including merchantability and fitness or a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warrant, including merchantability and fitness of or a particular purpose, is limited to one (1) year.
Manufacturer is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use of, any equipment, loss sales or profits or delay or
failure to perform this warranty obligation. The remedies, provided therein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
..
SD/HD/3G-SDI 1 to 4 Distribution Amplifier
SD-9
HD-SD-124
This Distribution Amplifier distributes a single SDI video signal data to several video signal adapter amplification equipment of SDI signal at the same time. There is no signal loss in the switching process. It supports almost all video formats which is SMPTE compliant. It can also achieve up to 1080p@60Hz for Full HD output performance perfectly.
7
SD/HD/3G-SDI to HDMI & CVBS Converter
Pro series with no delay
HD-SD-HDMI-PRO
SD-8P
This device converts a single channel SDI signal to different kinds of HD Multimedia HDMI signals and CVBS signals. It integrates SDI Cable equalizer and reclocker to enhance video performance and stability. Simultaneously, it also separates and converts the audio signals of SDI, embedding it to HDMI signal or output to analog audio DACs.
SD/HD-SDI Video Extender over CAT5 / 6 Kit
HD-SDE-UTPK
SD-12_ SD-12a_SD-12b
Tx – Camera Side Rx – DVR Side
HD-SDE-UTPT
SD-12a
HD-SDE-UTPR
SD-12b
This kit allows HD-SDI to be transmitted up to 50m / 160ft via CAT6 and 60m / 200ft via CAT6 cable in a point-to-point configuration. The SDI-UTP Extender supports transmission of up to
1.485 Gbps uncompressed, un-encrypted digital video (optionally including embedded Audio and/or Time Code) within television facilities and between professional video equipment.
HD-SD-124 MADE IN CHINA
Copyright © 2012 by AAS Technology www.AAS.com.tw
8
SD-9
R201302-V18
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project